BD Rebuilder Beta - Bug Reports Only

[Ch3vr0n]

Yes, post full conversion log. Not 5 lines of it.

Sent from my Nexus 6P with Tapatalk

[MrVideo]

I'm trying to convert a video I took with my phone to a dvd. However the import fails. Here's the log.

----------------------
[16:09:09] Importing: WORKING
- [16:09:20] Importing video file: (1 of 2)
- Preparing MP4 for processing...
- Scanning for Variable Frame Rate...
- Collecting audio/video streams from source...
- Converting VFR source to CFR format...
[16:09:37]ERROR: Failed VFR conversion. Aborted.
_____________

Any ideas?
Set IMPORT_VFR_DISABLE=1

[jdobbs]

Just a warning though. If the source is truly VFR, turning that off will result in audio/video sync issues.

[MrVideo]

Three out of 10 videos that I have to put on a Blu-ray have forced subtitltes (for the foreign language). Those subtitle tracks are marked as forced in the MKV files. Is there a flag to tell BDRB to encode the Blu-ray to turn on subtitle #1 (the forced one in each of the three files)?

[jdobbs]

Three out of 10 videos that I have to put on a Blu-ray have forced subtitltes (for the foreign language). Those subtitle tracks are marked as forced in the MKV files. Is there a flag to tell BDRB to encode the Blu-ray to turn on subtitle #1 (the forced one in each of the three files)?It should do it automatically. Run MEDIAINFO (the one included with BD-RB) on the original MKV and see if it shows the subtitle as forced. If so, BD-RB should see it and set that subtitle stream to forced in the resulting pseudo BD structure.

I haven't looked at this in a long time, I'll check the code and make sure it is working.

[abbadon]

Yes, post full conversion log. Not 5 lines of it.

Sent from my Nexus 6P with Tapatalk

That is the ENTIRE log.

__
trying

IMPORT_VFR_DISABLE=1

we'll see what happens

[MrVideo]

It should do it automatically. Run MEDIAINFO (the one included with BD-RB) on the original MKV and see if it shows the subtitle as forced. If so, BD-RB should see it and set that subtitle stream to forced in the resulting pseudo BD structure.
Yep. Default and forced.
I haven't looked at this in a long time, I'll check the code and make sure it is working.
Is this done before Backup is run, or during Backup? I stop and burn the contents before Backup.

[Ch3vr0n]

That is the ENTIRE log.

__
trying

IMPORT_VFR_DISABLE=1

we'll see what happensNo it's not. The start and ending are missing

Sent from my Nexus 6P with Tapatalk

[varekai]

No it's not. The start and ending are missing
These are my logs.
https://frupic.frubar.net/shots/36741.jpg
I know the start and endings are missing but... please advise?

[Ch3vr0n]

I'm not even going to dignify that with an answer as i wasn't talking to you in the first place.

[Lathe]

These are my logs.
https://frupic.frubar.net/shots/36741.jpg
I know the start and endings are missing but... please advise?

http://lathe-of-heaven.com/doh.gif

Careful... gonca really likes looking at other people's logs...

[Lathe]

I'm not even going to dignify that with an answer as i wasn't talking to you in the first place.

http://lathe-of-heaven.com/laugh2.gif

[gonca]

Lathe, remember saying

it was my anal little 'tweaks' that slowed everything down so much

Varekai
Please don't post those kinds of pics, Lathe likes looking at other guys "wood"

[Lathe]

Lathe, remember saying

Quote:
it was my anal little 'tweaks' that slowed everything down so much

Varekai
Please don't post those kinds of pics, Lathe likes looking at other guys "wood"

http://lathe-of-heaven.com/sigh1.gif

[varekai]

I'm not even going to dignify that with an answer as i wasn't talking to you in the first place.
Well... you actually did answer..
Relax... it was a joke... :D

[Jake802]

Not really a bug. I was just wondering if you are considering toying with the 4K Stuff?

[abbadon]

So adding "IMPORT_VFR_DISABLE=1" allowed it complete, but yes it was out of sync. As it was a small clip meant as a gift, I just put it on an old phone and gave it to the recipient to watch. I am curious what the issue is and how, if possible, to solve it.

[e143slime8]

The issue, yes. The CloneBD stuff, not so much.

Here's the contents of BDREBUILDER.INI for Jigsaw for those interested:

[Options]
VERSION=0.50.0.24
ENCODER=0
MODE=0
ENCODE_QUALITY=0
ONEPASS_ENCODING=2
AUTO_QUALITY=1
TARGET_SIZE=23500
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AUDIO_DRC=0
DECODER=0
AVCHD=1
REMOVE_WORKFILES=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
FRIMSOURCE=0
COMPLETION_BEEP=0
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
PGSTOSRT=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=23500
AUTO_BURN=1
VERBOSE_STATUS=1
[Paths]
SOURCE_PATH=H:\RIPPED NEW MOVIES\JIGSAW GOOD\
WORKING_PATH=H:\TEMP TARGET FROM BDRB MOVIES\



Note: the problem is the movie/audio sync and jumping around starting near the 29 minute mark.

[jdobbs]

@e143slime8

Could you also click on HELP/INSPECT and post what is displayed? Sync issues are often related to the versions of the helper apps. Also, have you tried reripping? When sync issues start that late, it can sometimes be caused by a glitch just before that point due to a bad rip.

[DoctorM]

Not really a bug. I was just wondering if you are considering toying with the 4K Stuff?
Can't 4k already be imported as video files or are you talking full UHD BD to BD conversion?

[HomeDepot4]

Trying to make a encode my version of "Elf" and I'm getting the following error, been using BDRebuilder for years and never had a problem.. have done a couple this week actually.. Making a BD25.

Rebuilding BD file Structure
- Failed in attempt to multiplex: MUX_MOVIE_ONLY.meta
- Not enought buffer for parse video stream. Current frame num 10139
Failed to REBUILD

[05/01/18] Checking System Settings
- BD-Rebuilder v0.50.25
- Windows Version: 6.2 [9200]
- Working Path Free Space: 2,365.13GB
- AVISYNTH Version: 2.6.0.6, Ok
- LAVFILTERS: Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
- FRIMEncode: Ok
- FRIMDecode: Ok
[05/01/18] Systems Settings Check complete

[Options]
VERSION=0.50.0.23
ENCODER=0
MODE=3
ENCODE_QUALITY=0
ONEPASS_ENCODING=2
AUTO_QUALITY=1
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=1
AC3_REENCODE=1
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
DTSX_ENABLE=1
AUDIO_DRC=0
DECODER=2
AVCHD=0
REMOVE_WORKFILES=1
REMOVE_OUTPUT=1
USE_FILTERS=0
BDMV_CERT_ONLY=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
FRIMSOURCE=0
COMPLETION_BEEP=0
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
PGSTOSRT=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=23500
TARGET_SIZE=23500
MOVIEONLY_TYPE=17
ALTCRF=23
ALT_TARGET=1024
ALT_CRF_TARGET=1024
ALTMETHOD=0
ALTAUTOCROP=0
AUTO_BURN=1
[Paths]
WORKING_PATH=G:\MUSIC\BLURAY\
SOURCE_PATH=G:\VIDEO\BACKUP\ELF\
[Batch]
MAIN_MPLS=00023.MPLS
MAIN_MPLS_ANGLE=0
FORCED_SUB=0
FORCED_AUD=0
AUDIO=111111111
SUBS=000000000000000000


Any help would be appreciated. Thanks..

UPDATE, Actually, it doesn't seem to be picking the movie... it's choosing one of the extras and not the main movie.. interesting

[jdobbs]

@HomeDepot4

1. Please post the entire log. Thanks.
2. Any reason why you aren't using the latest version?

[HomeDepot4]

@HomeDepot4

1. Please post the entire log. Thanks.
2. Any reason why you aren't using the latest version?

I have the latest installed... that's odd why it doesn't reflect that... Anyway, here is the complete log. Thanks! Obviously, not choosing the main movie, as it would be more than 11 gigs!

[05/01/18] BD Rebuilder v0.50.25
[12:22:26] Source: ELF_00023
- Input BD size: 11.77 GB
- Approximate total content: [01:28:24.841]
- Target BD size: 22.95 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=1 DTS=1 HD=1 Kbs=640
[12:22:26] PHASE ONE, Encoding
- [12:22:26] Processing: VID_00004 (1 of 9)
- [12:22:26] Extracting A/V streams [VID_00004]
- [12:24:21] Reencoding video [VID_00004]
- [12:24:21] Keeping original video (no reencode)
- [12:24:21] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [12:24:21] Processing: VID_00006 (2 of 9)
- [12:24:21] Extracting A/V streams [VID_00006]
- [12:25:06] Reencoding video [VID_00006]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 29,689 frames
- Bitrate: 28,685 Kbs
- [12:25:06] Reencoding: VID_00006, Pass 1 of 1
- [12:31:38] Video Encode complete
- [12:31:38] Processing: VID_00005 (3 of 9)
- [12:31:38] Extracting A/V streams [VID_00005]
- [12:32:12] Reencoding video [VID_00005]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 16,585 frames
- Bitrate: 35,000 Kbs
- [12:32:12] Reencoding: VID_00005, Pass 1 of 1
- [12:36:14] Video Encode complete
- [12:36:14] Processing: VID_00007 (4 of 9)
- [12:36:14] Extracting A/V streams [VID_00007]
- [12:36:35] Reencoding video [VID_00007]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 9,529 frames
- Bitrate: 35,000 Kbs
- [12:36:35] Reencoding: VID_00007, Pass 1 of 1
- [12:38:53] Video Encode complete
- [12:38:53] Processing: VID_00008 (5 of 9)
- [12:38:53] Extracting A/V streams [VID_00008]
- [12:39:21] Reencoding video [VID_00008]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 17,593 frames
- Bitrate: 28,279 Kbs
- [12:39:21] Reencoding: VID_00008, Pass 1 of 1
- [12:43:13] Video Encode complete
- [12:43:13] Processing: VID_00009 (6 of 9)
- [12:43:13] Extracting A/V streams [VID_00009]
- [12:43:32] Reencoding video [VID_00009]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 9,409 frames
- Bitrate: 33,044 Kbs
- [12:43:32] Reencoding: VID_00009, Pass 1 of 1
- [12:45:28] Video Encode complete
- [12:45:28] Processing: VID_00010 (7 of 9)
- [12:45:28] Extracting A/V streams [VID_00010]
- [12:45:57] Reencoding video [VID_00010]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 15,009 frames
- Bitrate: 34,855 Kbs
- [12:45:57] Reencoding: VID_00010, Pass 1 of 1
- [12:49:32] Video Encode complete
- [12:49:32] Processing: VID_00011 (8 of 9)
- [12:49:32] Extracting A/V streams [VID_00011]
- [12:49:53] Reencoding video [VID_00011]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 9,369 frames
- Bitrate: 35,000 Kbs
- [12:49:53] Reencoding: VID_00011, Pass 1 of 1
- [12:52:09] Video Encode complete
- [12:52:09] Processing: VID_00012 (9 of 9)
- [12:52:09] Extracting A/V streams [VID_00012]
- [12:52:33] Reencoding video [VID_00012]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 9,865 frames
- Bitrate: 35,000 Kbs
- [12:52:33] Reencoding: VID_00012, Pass 1 of 1
- [12:55:02] Video Encode complete
[12:55:02]PHASE ONE complete
[12:55:02]PHASE TWO - Rebuild Started
- [12:55:02] Rebuilding BD file Structure
- Failed in attempt to multiplex: MUX_MOVIE_ONLY.meta
- Not enought buffer for parse video stream. Current frame num 10139
[17:21:19] - Failed to REBUILD

[jdobbs]

1. The error is coming from TSMUXER. Typically that means a corrupt source... but, I don't think so in this case.

2. There is nothing in a source that says "I'm the main movie." So BD-RB uses a series of checks to look for in each playlist to determine which is the most likely. It's right 99+% of the time, but in this case it looks like it didn't. If it's choosing the wrong playlist, use the "Other Movie-Only Playlist" selection from the MODE menu and choose the playlist for the main feature. But... the one it's selecting looks like it is almost 12GB, which is pretty large for an extra. If it is wrong, that may fix your issue.

3. Now... with that said -- there is another obvious problem for this playlist. The first section of the playlist (VID_00004) is being kept intact while the rest of the playlist (VID_00006, VID_00007... etc) are being encoded. That means the first section is VC-1 and the others are AVC. That is illegal, should never happen, and is likely the source of the issue. So there is something going wrong in BD-RB that I will have to investigate.

If this playlist actually is the movie... you can add

FORCE_NOENCODE=1

to the [Options] area of your BDREBUILDER.INI file. This should make BD-RB keep the entire stream intact, and since the length will easily fit on the target there would be no need to reencode.

If, however, you ran into a situation where it wouldn't fit, or where you needed it to be AVC rather than VC-1, you could add (instead):

FORCE_ENCODE=1

That would make sure the source is reencoded, even if it would fit without doing so.

If you use either option, it's a good idea to remove it after you are done to avoid issues with other discs.

[HomeDepot4]

Thanks for helping clear that up. It looks like it 'picked' a 1 hour 28 minute extra that is included in the movie. I tried your suggestion of using the -other movie method and am encoding an MKV. When I get home I will try to burn the the BDR and report back.

Thank you!

[slimm]

Just wanted to thank you again for this software. A gift card has been sent your way.

[jdobbs]

Just wanted to thank you again for this software. A gift card has been sent your way.Thank you. Your support is appreciated.

[Blurayhd]

http://lathe-of-heaven.com/sigh1.gif

I have to say it you make me laugh

[Lathe]

I have to say it you make me laugh

http://lathe-of-heaven.com/banana01.gif http://lathe-of-heaven.com/banana02.gif http://lathe-of-heaven.com/banana03.gif http://lathe-of-heaven.com/banana04.gif http://lathe-of-heaven.com/banana05.gif

[geheim]

Hey jdobbs, do you have any news about UHD compatibility of BDRB?? Could you figure out the muxing problems??

[gonca]

I have to say it you make me laugh

He's used that one so many times that it is old, not original or funny anymore
Unless you are talking about his capabilities:D:D

[Lathe]

He's used that one so many times that it is old, not original or funny anymore
Unless you are talking about his capabilities:D:D

I think a certain someone needs a nice little trip to the woods...

http://lathe-of-heaven.com/Beating a dead horse3.gif

[gonca]

That is an old one as well, get a new script writer

[Blurayhd]

For encoding my Bluray disc I use so far my pc desktop but I wonder if I can use my laptop for this job? I mean I dont want to my laptop explode or hardware problems I have a Dell Inspiron 17 5000 series with I5 7th gen and 8gb ddr4 and the hot air is disiping to the back, just for try I started some encode and can notice that encode takes several hours so I cancel it and for that I asking to you this

what do you say? can I the encode process too much for my processor, my hardware etc considering the serveral hours or what?

Thank you in advance!!

[jdobbs]

For encoding my Bluray disc I use so far my pc desktop but I wonder if I can use my laptop for this job? I mean I dont want to my laptop explode or hardware problems I have a Dell Inspiron 17 5000 series with I5 7th gen and 8gb ddr4 and the hot air is disiping to the back, just for try I started some encode and can notice that encode takes several hours so I cancel it and for that I asking to you this

what do you say? can I the encode process too much for my processor, my hardware etc considering the serveral hours or what?

Thank you in advance!!I can't imagine whey it would be an issue... lots of people use notebooks for BD encoding.

[Blurayhd]

I can't imagine whey it would be an issue... lots of people use notebooks for BD encoding.

Thank you for answer me Jdobbs but you know, you said me days or weeks ago x264 takes the full load of processor (thanks for teach me about it), and I dont know if the encoding proces will be 7 hours, 14 hours you think so.

I really hope you dont mind of I wait if more people around here maybe could tell me and give me they opinion?

[Blurayhd]

I can't imagine whey it would be an issue... lots of people use notebooks for BD encoding.

Dear Jdobbs please dont get me wrong I appreciate that you told me I really do, I just wish some more opinions about it

Thank you again have a nice week!!

[drmih]

I only use a laptop nowadays for all encoding - if it's got a GPU all the better, as you can do BD or UHD compressions in about 30 mins. Unless you seriously overclock the CPU / GPU, any pc or laptop should cope with whatever you throw at it - they are specified to have some margin (hence why you can over-clock them).

[LowDead]

For encoding my Bluray disc I use so far my pc desktop but I wonder if I can use my laptop for this job? I mean I dont want to my laptop explode or hardware problems I have a Dell Inspiron 17 5000 series with I5 7th gen and 8gb ddr4 and the hot air is disiping to the back, just for try I started some encode and can notice that encode takes several hours so I cancel it and for that I asking to you this

what do you say? can I the encode process too much for my processor, my hardware etc considering the serveral hours or what?

Thank you in advance!!

Yeah you are good to go. Make sure there isn't any dust clogging the fan ports on the back though.

//LD

[Blurayhd]

I only use a laptop nowadays for all encoding - if it's got a GPU all the better, as you can do BD or UHD compressions in about 30 mins. Unless you seriously overclock the CPU / GPU, any pc or laptop should cope with whatever you throw at it - they are specified to have some margin (hence why you can over-clock them).

I have to say it, please excuse me Jdobbs I know this is Bd rebuilder post but as an example I´m using for others encoding that Rebuilder still doesnt, I´m using the GPU with encodings almost maybe 1hour and half and it is ok but I dont know about if using Bd rebuilder maybe 10 hours, 14 hours I dont want hardware problems

My laptop GPU is integrated Intel HD 620 with 128gb mb.

Of course it will be amazing if BD rebuilder could have the GPU option but I think if Jdobbs not put this option yet is for something

So you think or you are saying the laptop can work full load almost 14 hours?

Thank you again!!

[Blurayhd]

Yeah you are good to go. Make sure there isn't any dust clogging the fan ports on the back though.

//LD

Same the last post, thank you Lowdead so you´re sayng I can go with full load almost 14 hours? please excuse me English is my second language and some times is hard to me to explain or tell or saying but I do m best!!, the hardware specs are:

GPU Intel Integrated HD 620 with 128mb

8gb DDR4

Processor I5 7th gen

Just for ask, there is no way to add some more memory to integrated GPU from the RAM? I read can be possible with pc Desktop but no idea with laptop

[Ch3vr0n]

You can't add ram, as it's likely 'virtual' ram taken from the actual total ram in the laptop. However if you know how to get into the laptops BIOS and know your way around, it may potentially be possible to assign more. However, bdrb mainly uses x264/265 depending on the type of conversion you'll do. That's CPU demanding, not the built-in GPU part.

You should be fine if the cooler is up to the task. As the CPU will be under full load normally. Now, that will create heat, which the cooler will need to be capable of blowing out, do the vents need to be clear from dust (and nothing blocking them).

As to potential damage, in the old days when cpu's got too hot and cooling want to to today's standards they could indeed get damaged. Today, a CPU will shut itself off when it gets too hot to prevent that from happening.

Sent from my Nexus 6P with Tapatalk

[Blurayhd]

You can't add ram, as it's likely 'virtual' ram taken from the actual total ram in the laptop. However if you know how to get into the laptops BIOS and know your way around, it may potentially be possible to assign more. However, bdrb mainly uses x264/265 depending on the type of conversion you'll do. That's CPU demanding, not the built-in GPU part.

You should be fine if the cooler is up to the task. As the CPU will be under full load normally. Now, that will create heat, which the cooler will need to be capable of blowing out, do the vents need to be clear from dust (and nothing blocking them).

As to potential damage, in the old days when cpu's got too hot and cooling want to to today's standards they could indeed get damaged. Today, a CPU will shut itself off when it gets too hot to prevent that from happening.

Sent from my Nexus 6P with Tapatalk

Thank you Ch3vr0n

Jdobbs there´s some way to add an option or button in Bd rebuilder that you can pause the encoding and continue? so we dont have to start all the encoding again...

[jdobbs]

You can stop at any time... but it will always have to resume at the beginning of a current pass (x264 doesn't have a way of which I'm aware to resume an encode pass). I'm not aware of a way to pause only a process. That doesn't mean it doesn't necessarily exist, only that I'm not familiar with it (if it does exist).

[Lathe]

That doesn't mean it doesn't necessarily exist, only that I'm not familiar with it (if it does exist).

But, if it DOESN'T exist and you DO know about it...?

Ahhhhh... then you'd have something...

[MrVideo]

You can stop at any time... but it will always have to resume at the beginning of a current pass (x264 doesn't have a way of which I'm aware to resume an encode pass). I'm not aware of a way to pause only a process. That doesn't mean it doesn't necessarily exist, only that I'm not familiar with it (if it does exist).
Under Windoze I do not think you can. I have the cygwin tools installed and start my encoding via the Zshell. One is able to Ctrl-Z (stop) the script, but I do not think that the x264 executable will accept the stop. It should under Unix/Linux, but this isn't Unix/Linux, even with the cygwin tools. Windoze architecture must still be honored.

I just tried it with a 2nd pass of the x264 encoder. The script I use to do all of my encodings indeed was suspended (stopped), but the x264 encoder kept right on ticking.

[Mediogre]

You can stop at any time... but it will always have to resume at the beginning of a current pass (x264 doesn't have a way of which I'm aware to resume an encode pass). I'm not aware of a way to pause only a process. That doesn't mean it doesn't necessarily exist, only that I'm not familiar with it (if it does exist).

Process Explorer allows you to suspend a process. Just find the x264.exe process in its window, right-click on it and select suspend. It's worked well for me in the past.

[MrVideo]

Process Explorer allows you to suspend a process. Just find the x264.exe process in its window, right-click on it and select suspend. It's worked well for me in the past.
Interesting. I'll have to remember that.

[mparade]

@jdobbs

Will BD-RB have an option for chosing DGDecNV as the frameserver for UHD-BD encodings? I have a Pascal Card and latest DGDecNV now supports decoding of HEVC upto 12-bit without any issue. I have tested it and is working flawlessly.

Thanks for this amazing software.

[mparade]

Is it possible to use Full Backup mode in case of BD3D source (including menus and extras) without reencoding the video (keeping intact)? I just want to throw out unwanted audio streams, reencode the English HD track to AC3 5.1 while keeping an other AC3 5.1 track of the main movie.

Giving thanks to any answer. :)