BD Rebuilder Beta - Bug Reports Only

[jdobbs]

Here is the link to one. Not sure why link will not "highlight". :confused:
I appreciate your looking into this! :)

http://www.sendspace.com/file/y4ra2mThanks. I'll let you know what I find.

[jdobbs]

Here is the link to one. Not sure why link will not "highlight". :confused:
I appreciate your looking into this! :)

http://www.sendspace.com/file/y4ra2m Here's a status. When I import I convert the input file(s) to an intermediate MKV in order to give the routines a standard input. It looks like the rate get's confused in that process. If I run MediaInfo against the resulting MKV it tells me the video rate is 29.94fps.

Odd, for sure.

[steveg32]

@steveg32

I'm running "Ice Age, Continental Drift" as a Quick-Play backup with ISO output right now. I'll let you know how it comes out.

Mahalo jdobbs! :thanks:

[jdobbs]

Mahalo jdobbs! :thanks:Interesting that if you point PowerDVD directly to the folder and say "play from hard drive" on the mounted ISO it plays fine... but if you try to play the drive, it fails.

[jdobbs]

Mahalo jdobbs! :thanks:Interesting that if you point PowerDVD directly to the folder and say "play from hard drive" on the mounted ISO it plays fine... but if you try to play the drive, it fails.Well, you hit the nail on the head. All it needed was an empty CERTIFICATE folder. That's easy enought to fix. I need to do some research as to why, though. I do lots of movie-only discs that don't have a CERTIFICATE folder with no issues. I'm not sure why the Quick-Play output needs one.

It also seems that it may not be an issue with a standalone player, only PowerDVD.

[Edit] In checking around, this appears to be a bug in PowerDVD. It requires a CERTIFICATE folder to play directly from a drive. But the CERTIFICATE folder, in fact, can actually cause issues on some players if it exists on an AVCHD disc. If you deselect the "Strict AVCHD" selection in the SETUP menu, the CERTIFICATE folder should remain. I've also added the creation of the CERTIFICATE folder to the "Import File" function so it will exist in the pseudo-bd structure. That way if "Strict AVCHD" is deselected it can be copied.

[steveg32]

Well, you hit the nail on the head. All it needed was an empty CERTIFICATE folder. That's easy enought to fix. I need to do some research as to why, though. I do lots of movie-only discs that don't have a CERTIFICATE folder with no issues. I'm not sure why the Quick-Play output needs one.

It also seems that it may not be an issue with a standalone player, only PowerDVD.

[Edit] In checking around, this appears to be a bug in PowerDVD. It requires a CERTIFICATE folder to play directly from a drive. But the CERTIFICATE folder, in fact, can actually cause issues on some players if it exists on an AVCHD disc. If you deselect the "Strict AVCHD" selection in the SETUP menu, the CERTIFICATE folder should remain. I've also added the creation of the CERTIFICATE folder to the "Import File" function so it will exist in the pseudo-bd structure. That way if "Strict AVCHD" is deselected it can be copied.

Mahalo jdobbs. U DA MAN! :thanks:

[IslaMon]

Why not keep the CERTIFICATE folder? It was worked as part of BDRb for a very long time.

[brunchto]

Been traveling for the last week. Hopefully I'll be able to check it out some time this week.

I've tested that for french angles:
http://forum.doom9.org/showthread.php?p=1620008#post1620008

maybe you will find a clue :) on this problem.

[jdobbs]

Why not keep the CERTIFICATE folder? It was worked as part of BDRb for a very long time. Because it causes some players to fail. It has always worked the way it does right now, and has not changed.

[omegaman7]

Because it causes some players to fail. It has always worked the way it does right now, and has not changed.

Interesting. I wonder if that was why my Samsung 1590 was flaky with some discs, and not others :S Oh well. I threw it out a long time ago :D

[HatchetMan]

Breaking Dawn Part 2 contains 9.14GB of jpgs.bin files in the JAR folder. Are they necessary to keep when doing a full disc BD25 backup? Asking because that space could be used more wisely on bitrate otherwise. BTW: The AnyDVD HD v7.1.7.0 folder rip came out to a whopping 55.4GB! Ahhh, the infinite joys of screenpass protections...

[omegaman7]

Breaking Dawn Part 2 contains 9.14GB of jpgs.bin files in the JAR folder. Are they necessary to keep when doing a full disc BD25 backup? Asking because that space could be used more wisely on bitrate otherwise. BTW: The AnyDVD HD v7.1.7.0 folder rip came out to a whopping 55.4GB! Ahhh, the infinite joys of screenpass protections...

Did you use the latest anydvd HD? In any case, you can delete those useless files. They are not needed, and will not effect BD rebuilder, or a player. If memory serves, I deleted a 05000 folder.

[HatchetMan]

Did you use the latest anydvd HD? In any case, you can delete those useless files. They are not needed, and will not effect BD rebuilder, or a player. If memory serves, I deleted a 05000 folder.

Thanks omegaman7, just the answer I was looking for! I backed up up Pt.1 Extended last night since it did not have these bogus files. I'll delete the aforementioned .bin files from 05000 and start Pt.2 backup tonight.

[Tiger1327]

I starting Quantum of Solace and it failed this is the log any Ideas?

----------------------
[03/23/13] BD Rebuilder v0.43.04 (beta)
[05:15:40] Source: QUANTUM.OF.SOLACE.2008.1080P.BLU-RAY.AVC.DTS-HD.MA.5.1-DON
- Input BD size: 44.36 GB
- Approximate total content: [03:31:09.614]
- Target BD size: 22.95 GB
- Windows Version: 6.2 [9200]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[05:15:40] PHASE ONE, Encoding
- [05:15:40] Processing: VID_00013 (1 of 48)
- [05:15:40] Extracting A/V streams [VID_00013]
- [05:22:09] Reencoding video [VID_00013]
- [05:22:09] Keeping original video (no reencode)
- [05:22:09] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:22:09] Multiplexing M2TS
- [05:26:06] Processing: VID_00237 (2 of 48)
- [05:26:06] Extracting A/V streams [VID_00237]
- [05:26:14] Reencoding video [VID_00237]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,504 frames
- Bitrate: 8,620 Kbs
- [05:26:14] Reencoding: VID_00237, Pass 1 of 1
- [05:27:07] Video Encode complete
- [05:27:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:27:07] Multiplexing M2TS
- [05:27:12] Processing: VID_00238 (3 of 48)
- [05:27:12] Extracting A/V streams [VID_00238]
- [05:27:19] Reencoding video [VID_00238]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,582 frames
- Bitrate: 8,686 Kbs
- [05:27:19] Reencoding: VID_00238, Pass 1 of 1
- [05:27:58] Video Encode complete
- [05:27:58] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:27:58] Multiplexing M2TS
- [05:28:03] Processing: VID_00239 (4 of 48)
- [05:28:03] Extracting A/V streams [VID_00239]
- [05:28:10] Reencoding video [VID_00239]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,185 frames
- Bitrate: 8,686 Kbs
- [05:28:10] Reencoding: VID_00239, Pass 1 of 1
- [05:28:40] Video Encode complete
- [05:28:40] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:28:40] Multiplexing M2TS
- [05:28:45] Processing: VID_00240 (5 of 48)
- [05:28:45] Extracting A/V streams [VID_00240]
- [05:28:54] Reencoding video [VID_00240]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,760 frames
- Bitrate: 10,247 Kbs
- [05:28:54] Reencoding: VID_00240, Pass 1 of 1
- [05:29:52] Video Encode complete
- [05:29:52] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:29:52] Multiplexing M2TS
- [05:29:57] Processing: VID_00241 (6 of 48)
- [05:29:57] Extracting A/V streams [VID_00241]
- [05:30:12] Reencoding video [VID_00241]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 6,489 frames
- Bitrate: 10,358 Kbs
- [05:30:12] Reencoding: VID_00241, Pass 1 of 1
- [05:31:44] Video Encode complete
- [05:31:44] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:31:44] Multiplexing M2TS
- [05:31:50] Processing: VID_00242 (7 of 48)
- [05:31:50] Extracting A/V streams [VID_00242]
- [05:33:04] Reencoding video [VID_00242]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 35,616 frames
- Bitrate: 10,197 Kbs
- [05:33:04] Reencoding: VID_00242, Pass 1 of 1
- [05:42:58] Video Encode complete
- [05:42:58] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:42:58] Multiplexing M2TS
- [05:43:17] Processing: VID_00243 (8 of 48)
- [05:43:17] Extracting A/V streams [VID_00243]
- [05:43:27] Reencoding video [VID_00243]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 4,192 frames
- Bitrate: 10,217 Kbs
- [05:43:27] Reencoding: VID_00243, Pass 1 of 1
- [05:44:30] Video Encode complete
- [05:44:30] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:44:30] Multiplexing M2TS
- [05:44:35] Processing: VID_00244 (9 of 48)
- [05:44:35] Extracting A/V streams [VID_00244]
- [05:44:47] Reencoding video [VID_00244]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 4,658 frames
- Bitrate: 10,237 Kbs
- [05:44:47] Reencoding: VID_00244, Pass 1 of 1
- [05:45:58] Video Encode complete
- [05:45:58] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:45:58] Multiplexing M2TS
- [05:46:04] Processing: VID_00245 (10 of 48)
- [05:46:04] Extracting A/V streams [VID_00245]
- [05:46:13] Reencoding video [VID_00245]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,220 frames
- Bitrate: 10,214 Kbs
- [05:46:13] Reencoding: VID_00245, Pass 1 of 1
- [05:47:02] Video Encode complete
- [05:47:02] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:47:02] Multiplexing M2TS
- [05:47:08] Processing: VID_00246 (11 of 48)
- [05:47:08] Extracting A/V streams [VID_00246]
- [05:47:18] Reencoding video [VID_00246]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,977 frames
- Bitrate: 10,222 Kbs
- [05:47:18] Reencoding: VID_00246, Pass 1 of 1
- [05:48:21] Video Encode complete
- [05:48:21] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:48:21] Multiplexing M2TS
- [05:48:26] Processing: VID_00247 (12 of 48)
- [05:48:26] Extracting A/V streams [VID_00247]
- [05:48:35] Reencoding video [VID_00247]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,667 frames
- Bitrate: 11,788 Kbs
- [05:48:35] Reencoding: VID_00247, Pass 1 of 1
- [05:49:17] Video Encode complete
- [05:49:17] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:49:17] Multiplexing M2TS
- [05:49:22] Processing: VID_00248 (13 of 48)
- [05:49:22] Extracting A/V streams [VID_00248]
- [05:49:31] Reencoding video [VID_00248]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,444 frames
- Bitrate: 10,615 Kbs
- [05:49:31] Reencoding: VID_00248, Pass 1 of 1
- [05:50:21] Video Encode complete
- [05:50:21] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:50:21] Multiplexing M2TS
- [05:50:27] Processing: VID_00249 (14 of 48)
- [05:50:27] Extracting A/V streams [VID_00249]
- [05:50:31] Reencoding video [VID_00249]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 902 frames
- Bitrate: 10,234 Kbs
- [05:50:31] Reencoding: VID_00249, Pass 1 of 1
- [05:50:46] Video Encode complete
- [05:50:46] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:50:46] Multiplexing M2TS
- [05:50:50] Processing: VID_00250 (15 of 48)
- [05:50:50] Extracting A/V streams [VID_00250]
- [05:50:58] Reencoding video [VID_00250]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,557 frames
- Bitrate: 10,188 Kbs
- [05:50:58] Reencoding: VID_00250, Pass 1 of 1
- [05:51:38] Video Encode complete
- [05:51:38] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:51:38] Multiplexing M2TS
- [05:51:42] Processing: VID_00251 (16 of 48)
- [05:51:42] Extracting A/V streams [VID_00251]
- [05:51:50] Reencoding video [VID_00251]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,414 frames
- Bitrate: 10,239 Kbs
- [05:51:50] Reencoding: VID_00251, Pass 1 of 1
- [05:52:28] Video Encode complete
- [05:52:28] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:52:28] Multiplexing M2TS
- [05:52:32] Processing: VID_00252 (17 of 48)
- [05:52:32] Extracting A/V streams [VID_00252]
- [05:52:39] Reencoding video [VID_00252]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,836 frames
- Bitrate: 10,202 Kbs
- [05:52:39] Reencoding: VID_00252, Pass 1 of 1
- [05:53:07] Video Encode complete
- [05:53:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:53:07] Multiplexing M2TS
- [05:53:12] Processing: VID_00253 (18 of 48)
- [05:53:12] Extracting A/V streams [VID_00253]
- [05:53:19] Reencoding video [VID_00253]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,325 frames
- Bitrate: 10,198 Kbs
- [05:53:19] Reencoding: VID_00253, Pass 1 of 1
- [05:53:57] Video Encode complete
- [05:53:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:53:57] Multiplexing M2TS
- [05:54:02] Processing: VID_00254 (19 of 48)
- [05:54:02] Extracting A/V streams [VID_00254]
- [05:54:08] Reencoding video [VID_00254]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,897 frames
- Bitrate: 10,230 Kbs
- [05:54:08] Reencoding: VID_00254, Pass 1 of 1
- [05:54:37] Video Encode complete
- [05:54:37] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:54:37] Multiplexing M2TS
- [05:54:41] Processing: VID_00255 (20 of 48)
- [05:54:41] Extracting A/V streams [VID_00255]
- [05:54:48] Reencoding video [VID_00255]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,861 frames
- Bitrate: 10,202 Kbs
- [05:54:48] Reencoding: VID_00255, Pass 1 of 1
- [05:55:16] Video Encode complete
- [05:55:16] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:55:17] Multiplexing M2TS
- [05:55:21] Processing: VID_00256 (21 of 48)
- [05:55:21] Extracting A/V streams [VID_00256]
- [05:55:28] Reencoding video [VID_00256]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,971 frames
- Bitrate: 10,252 Kbs
- [05:55:28] Reencoding: VID_00256, Pass 1 of 1
- [05:55:58] Video Encode complete
- [05:55:58] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:55:58] Multiplexing M2TS
- [05:56:03] Processing: VID_00257 (22 of 48)
- [05:56:03] Extracting A/V streams [VID_00257]
- [05:56:10] Reencoding video [VID_00257]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,949 frames
- Bitrate: 10,212 Kbs
- [05:56:10] Reencoding: VID_00257, Pass 1 of 1
- [05:56:40] Video Encode complete
- [05:56:40] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:56:40] Multiplexing M2TS
- [05:56:44] Processing: VID_00258 (23 of 48)
- [05:56:44] Extracting A/V streams [VID_00258]
- [05:56:51] Reencoding video [VID_00258]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,894 frames
- Bitrate: 10,191 Kbs
- [05:56:51] Reencoding: VID_00258, Pass 1 of 1
- [05:57:20] Video Encode complete
- [05:57:20] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:57:20] Multiplexing M2TS
- [05:57:25] Processing: VID_00259 (24 of 48)
- [05:57:25] Extracting A/V streams [VID_00259]
- [05:57:31] Reencoding video [VID_00259]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,883 frames
- Bitrate: 10,220 Kbs
- [05:57:31] Reencoding: VID_00259, Pass 1 of 1
- [05:58:01] Video Encode complete
- [05:58:01] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:58:01] Multiplexing M2TS
- [05:58:05] Processing: VID_00260 (25 of 48)
- [05:58:05] Extracting A/V streams [VID_00260]
- [05:58:12] Reencoding video [VID_00260]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,119 frames
- Bitrate: 10,201 Kbs
- [05:58:12] Reencoding: VID_00260, Pass 1 of 1
- [05:58:46] Video Encode complete
- [05:58:46] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:58:46] Multiplexing M2TS
- [05:58:50] Processing: VID_00261 (26 of 48)
- [05:58:50] Extracting A/V streams [VID_00261]
- [05:58:56] Reencoding video [VID_00261]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,454 frames
- Bitrate: 10,225 Kbs
- [05:58:56] Reencoding: VID_00261, Pass 1 of 1
- [05:59:19] Video Encode complete
- [05:59:19] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:59:19] Multiplexing M2TS
- [05:59:24] Processing: VID_00262 (27 of 48)
- [05:59:24] Extracting A/V streams [VID_00262]
- [05:59:30] Reencoding video [VID_00262]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,677 frames
- Bitrate: 10,203 Kbs
- [05:59:30] Reencoding: VID_00262, Pass 1 of 1
- [05:59:57] Video Encode complete
- [05:59:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:59:57] Multiplexing M2TS
- [06:00:02] Processing: VID_00263 (28 of 48)
- [06:00:02] Extracting A/V streams [VID_00263]
- [06:00:07] Reencoding video [VID_00263]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,795 frames
- Bitrate: 10,238 Kbs
- [06:00:07] Reencoding: VID_00263, Pass 1 of 1
- Encode failed. Aborting.
- BD-Rebuilder v0.43.04 (beta)
- Windows Version: 6.2 [9200]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 4422, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[06:00:08] - Failed video encode, aborted

[jdobbs]

@Tiger1327

Not sure what could have happened. It looks like lots of similar files were successfully completed before it got to that one so it is safe to assume your configuration is right (unless you were running some other video application that may have changed it). Any chance your system may have overheated at that point? Is it overclocked, maybe?

[Tiger1327]

no not overclocked and I have successfully done several other movies.. I will check the fans

[jdobbs]

no not overclocked and I have successfully done several other movies.. I will check the fans If that were the case, though, I'd assume that after a cooldown you could continue the encode. Have you tried?

You could also try opening the VID_00263.AVS file with Media Player Classic (included in the BD Rebuilder "...\tools\MPC" folder). That way you can see if the source is decoding properly.

[CV91913]

no not overclocked and I have successfully done several other movies.. I will check the fans

It has been awhile since I have seen this problem but it used to happen quite often when the source had numerous small files. As jdobbs said, it would process a number of files before erroring. I tried turning off my virus checker which had no effect, and my system was not over clocked. I was able to complete all of the movies that errored by just having bdrb continue where it left off. On a few occasions it took two or three restarts but it eventually completed normally. Don't delete any of the work files and just let bdrb continue where it left off

[AGKnotUser]

Used auto blanking and manual blanking feature on Disney's "Frankenweenie". Result did not display the graphic of the first menu properly. Instead of the b/w dog's body on table scene behind the language choices, it showed the color slide of the castle. When features were used with a Columbia title, the menu displayed properly.

INI file:

[Options]
MODE=1
ENABLE_TEST=1
ENABLE_BLANKING=1
BLANK_THRESHOLD=30
DTSX_ENABLE=1
ENCODE_QUALITY=0
ONEPASS_ENCODING=2
AUTO_QUALITY=1
AUDIO_TO_KEEP=all
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=1
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
VERSION=0.43.0.4
VERSION=0.43.0P=0
DGDECNV=0
VERIO_TRACK_LIMIT=0
VERSION=0.43.0.1
VERSIONTARGET_SIZE=23500
TARGET_SIZE=23500
VERSION=0.40.0.4
QUICK_EXTRAS=1
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=24000
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
AUDIO_TRACK_LIMIT=0
AUTO_BURN=2
WIDE_PERCENT=100
WIDE_OFFSET=.90
[Paths]
DGIndexNV=C:\DGDecNV\DGIndexNV.exe
DGDecNV=C:\DGDecNV\DGDecodeNV.dll
WORKING_PATH=C:\BD-RB\WORK\
SOURCE_PATH=E:\

[Ch3vr0n]

Then your probably blanked out that graphic. I always preview discs i intend to blank, so i know what to look for to blank as in trailers etc, and what NOT to blank (as in static bg images etc)

[AGKnotUser]

Then your probably blanked out that graphic. I always preview discs i intend to blank, so i know what to look for to blank as in trailers etc, and what NOT to blank (as in static bg images etc)

No, I specifically checked for that graphic. I made sure it was included.

[jdobbs]

No, I specifically checked for that graphic. I made sure it was included. Often there is more than one... especially in menus. Try it again -- but don't manually remove anything. I'll bet the graphic is there...

[AGKnotUser]

Often there is more than one... especially in menus. Try it again -- but don't manually remove anything. I'll bet the graphic is there...

Ok, I'm running it now with Auto-blanking and the "BLANK_THRESHOLD=30" line in the INI file and and not touching anything else. Will report back.

[AGKnotUser]

OK, same wrong menu graphic. Now I'm going to try Auto-blank Extras without the BLANK_THRESHOLD=30 line in the INI file.

[jdobbs]

OK, same wrong menu graphic. Now I'm going to try Auto-blank Extras without the BLANK_THRESHOLD=30 line in the INI file. I don't think the threshold will matter... while there is no flag that says "this is a menu", BD-RB goes through a series of checks that, as a sum, comes to that conclusion. Auto-blank doesn't remove what it thinks is a menu (regardless of the threshold).

[AGKnotUser]

I don't think the threshold will matter... while there is no flag that says "this is a menu", BD-RB goes through a series of checks that, as a sum, comes to that conclusion. Auto-blank doesn't remove what it thinks is a menu (regardless of the threshold).

It did make a difference. Without the Threshold line no graphic was shown behind the menu, just black. Perhaps in this case the menu graphic is being stored differently from other discs.

[richardrpg]

Hiddenopts help needed. Sorry if this is the wrong thread to post but cant find where to post. I just need some help with increasing AC3 5.1 sound output.In the hidden options.txt there is this option "AUDIO_AMPLIFY= n n = v" All other options have a numeric value for "n" but audio amplification has a "v" if I want to increase output by 50% above normal, what would I put by "n" I've seen in posts regarding DVDrebuilder that they would use for eg. 1.5 for a 50% increase, is it the same for BDrebuilder.
I know this probably sounds like a dumb question for most users, but coding and programming is all like magic to me, I just follow instructions.
Thanks

[jdobbs]

No news about angle on Ice Age 4 FR ? :) I found the issue. It appears that the number of angles specified in the last playitem of that playlist only had 1 alternate angle, while some of the earlier playitems had 4 (something I didn't think was legal) and the angle count was being reset. I've put in a workaround, and it will be included in the next release.

[jdobbs]

Hiddenopts help needed. Sorry if this is the wrong thread to post but cant find where to post. I just need some help with increasing AC3 5.1 sound output.In the hidden options.txt there is this option "AUDIO_AMPLIFY= n n = v" All other options have a numeric value for "n" but audio amplification has a "v" if I want to increase output by 50% above normal, what would I put by "n" I've seen in posts regarding DVDrebuilder that they would use for eg. 1.5 for a 50% increase, is it the same for BDrebuilder.
I know this probably sounds like a dumb question for most users, but coding and programming is all like magic to me, I just follow instructions.
Thanks Yes. A 1.2 will give a 20% increase. 1.5 would be a 50% increase, .8 will give a 20% decrease, etc. Be careful, as raising the volume a lot can create clipping if it makes any portion of the signal go above the maximum volume.

[Nico8583]

I found the issue. It appears that the number of angles specified in the last playitem of that playlist only had 1 alternate angle, while some of the earlier playitems had 4 (something I didn't think was legal) and the angle count was being reset. I've put in a workaround, and it will be included in the next release.
Very good news, you're the best ;) thanks !!

[sieve]

BD Rebuilder was working great, then suddenly started crashing on me last week. I upgraded to the latest version of BDR. No change. I uninstalled and reinstalled BDR and all components. No change. I ran Inspect, and all was OK.

Here's the output from a recent try

[03/27/13] BD Rebuilder v0.43.04 (beta)
[02:57:55] Source: CHRONICLE_OF_A_SUMMER_00001
- Input BD size: 24.80 GB
- Approximate total content: [01:30:50.069]
- Target BD size: 22.95 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- AVS Filtering is enabled
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=448
- Resuming from previously started job.
[02:57:57] PHASE ONE, Encoding
- [02:57:57] Processing: VID_00274 (1 of 1)
- [02:57:57] Reencoding video [VID_00274]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 130,671 frames
- Bitrate: 32,326 Kbs
- [02:57:57] Reencoding: VID_00274, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.43.04 (beta)
- Windows Version: 6.2 [9200]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 4422, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[02:58:10] - Failed video encode, aborted

Hopefully someone has some ideas. Thanks in advance

[richardrpg]

Yes. A 1.2 will give a 20% increase. 1.5 would be a 50% increase, .8 will give a 20% decrease, etc. Be careful, as raising the volume a lot can create clipping if it makes any portion of the signal go above the maximum volume.

Thanks, I'll keep the clipping in mind

[jdobbs]

@!sieve

1. Whenever I see "AVS Filtering is enabled" -- I have to believe that's the most likely candidate for an issue. Disable the filters and try a test run.
2. If that isn't it, reinstall HAALI, AVISYNTH, and FFDSHOW. Sometimes other unfriendly software can "muck" them up and they need to be reinstalled.

[sieve]

@!sieve

1. Whenever I see "AVS Filtering is enabled" -- I have to believe that's the most likely candidate for an issue. Disable the filters and try a test run.

Will try right now...

[steveg32]

Like my PowerDVD 10 player, my Pioneer BDP-121 standalone (aka BDP-120) does not playback DTS Express Audio encoded with BD-Rebulilder. So I purchased a used Panasonic DMP-BD85 standalone in good condition on eBay and it does! :D Both standalones are pre-Cinavia production, but the DMP-BD85 does it all. My cost? $61.99 including S&H to Hawaii. This unit retails new for $299.00 + S&H so I'm very happy with the deal. I'm so pleased with the unit that I purchased another one (won bid at $69.95) to store as a backup because isn't that what we do ... backup!

Btw, after installing the newest firmware versions available for both brands (post-Cinavia release dates) there was no add-on Cinavia effect. My backups still play through to the end UNLIKE on my LG BP620 post-Cinavia standalone. Take care all.

[varekai]

@steveg32

I have that Panasonic DMP-BD85 Blu-ray player, it's a very good player, fast on loading, excellent audio performance!
It's actually loading faster than my Oppo 93.

You should try this if you want to unlock some features and also make it regionfree:

http://www.firmwareinfo.com/viewtopic.php?f=14&t=258

Beware that it is extremely important that you "apply" for the fimware in a correct way.

regards

Edit/
This topic probably belongs in "Hardware & Software".

[jdobbs]

... does not playback DTS Express Audio encoded with BD-Rebulilder... Just for the sake of accuracy, BD Rebuilder does not encode DTS Express. It simply extracts it from the original stream and then remuxes it into the new stream during rebuild.

[Nico8583]

When do you think to release the new version of BD-RB ? :)

[sieve]

1. Whenever I see "AVS Filtering is enabled" -- I have to believe that's the most likely candidate for an issue. Disable the filters and try a test run.

Didn't solve it.
It did start pass number one and appeared to get stuck about 18k frames in. It just sat at that point for hours.

I just let it go and went to bed. In the A.M., I noticed that the computer rebooted itself. Presumably the result of a bluescreen. The odd thing is that it shouldn't have been a memory issue - I have 10GB RAM installed.

I've experienced this reboot problem before in recent times since this issue has arisen.

One thing I've also experienced is sometimes BDR will be in the first or second pass, and a Windows error message will pop up saying that the H.264 codec has stopped working. This likely has something to do with the problem I'm experiencing, but I'm admittedly not as knowledgeable as others in debugging.


2. If that isn't it, reinstall HAALI, AVISYNTH, and FFDSHOW. Sometimes other unfriendly software can "muck" them up and they need to be reinstalled.

I'll try that next. But I did just uninstall and reinstall them a couple days ago.

[jdobbs]

I experienced a Run-time Error '6' Overflow when attempting too import the DVD: The Bridge on the River Kwai which I believe has the issue you corrected above. The log is as follows:

[11:28:58] Importing DVD: BRIDGE_ON_THE_RIVER_KWAI
- Importing DVD title [1 of 4]
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Multiplexing audio/video/subtitles...
- Importing DVD title [2 of 4]
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Multiplexing audio/video/subtitles...
- Importing DVD title [3 of 4]
- Collecting audio/video/subtitle streams...
----------------------
[11:35:29] Importing DVD: BRIDGE_ON_THE_RIVER_KWA
- Importing DVD title [1 of 4]
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Multiplexing audio/video/subtitles...
- Importing DVD title [2 of 4]
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Multiplexing audio/video/subtitles...
- Importing DVD title [3 of 4]
- Collecting audio/video/subtitle streams...
The first import was directly from the DVD through anydvd and the second was from files ripped from the hard drive. PC is windows 7 x64.

Thank you for the for the updates! Well I finally got around to testing this one. I've corrected the runtime error for the next release -- but wow, what a strange disc. The main feature is split into two titles (in two different titlesets) -- and there a couple of smaller titles that are nothing but junk. Even on the original disc if you get past the middle of the movie, you can't rewind back any further than the halfway point.

I think they must be there to make copying difficult. I would suggest you set DVD_IMPORT_THRESHOLD=30 before importing (then remove it afterward) -- and don't try to do a movie-only backup against the import (because you'll only get one of the two titles).

[jdobbs]

Didn't solve it.
It did start pass number one and appeared to get stuck about 18k frames in. It just sat at that point for hours.

I just let it go and went to bed. In the A.M., I noticed that the computer rebooted itself. Presumably the result of a bluescreen. The odd thing is that it shouldn't have been a memory issue - I have 10GB RAM installed.

I've experienced this reboot problem before in recent times since this issue has arisen.

One thing I've also experienced is sometimes BDR will be in the first or second pass, and a Windows error message will pop up saying that the H.264 codec has stopped working. This likely has something to do with the problem I'm experiencing, but I'm admittedly not as knowledgeable as others in debugging.




I'll try that next. But I did just uninstall and reinstall them a couple days ago. Based on your description it sounds like your system is experiencing a heat related instability. Pass two is where the processor is really under stress. I'd check all the fans and clean any dust out of the heatsinks. If you're handy with computers, you may also want to re-seat the processor and replace the heatsink compound.

[jdobbs]

When do you think to release the new version of BD-RB ? :) What's the rush? The last one is only 20 days old.

[Nico8583]

What's the rush? The last one is only 20 days old.
I would like to backup Ice Age 4 with your workaround for angles :)

[jdobbs]

I would like to backup Ice Age 4 with your workaround for angles :) I have a version that I can release -- but it would have be without the 3D SBS support.

[jdobbs]

I have updated the first post of this thread with links to a new release o BD-RB (v0.43.06). Changes for this version:- Fixed a problem in which frame rates could be
incorrectly reported when importing from an
interlaced source.
- Modified IMPORT file pseudo structure so that
it creates a CERTIFICATE folder.
- Improved the adjustments made on certain import
sizes in order to become compliant.
- Changed the method used for stereo downmixing,
this should correct "low volume" output when
converting to stereo (especially for ALTERNATE
output using lower bitrates).
- Added new ALTERNATE format selections for iPad
2+, iPhone 4s+, and other devices that accept
Level 4.1 output and 1080p in an MP4 container.
Note: Since these new selections accept L4.1,
settings in the "Encoder Setting" menu are used
(older iPads & iPhones were more limited). This
allows for better quality at similar bitrates &
better sizing at similar CRF settings. Older
iPad 1's & early iPhones will not accept output
that uses this ALTERNATE selection.
- Corrected an issue in which it may be possible
that odd angle count deviations within a single
playlist might make some angles unavailable for
movie-only selection.
- Fixed an issue in which selection of alternate
angles from the movie-only playlist dialog was
not correctly replacing primary angle playitems
with the angle playitem in some cases.
- Corrected a problem in which aspect ratio for
imported 16:9 DVDs could be incorrectly set to
4:3 in the pseudo-BD import structure.
- Fixed an issue that could result in "Runtime
Error 6" during import of a DVD.
- Corrected issue associated with DTS streams
when attempting to import from DVD (v0.43.5).
- Other minor corrections and cosmetic fixes.

[Nico8583]

I have a version that I can release -- but it would have be without the 3D SBS support.
Thanks a lot ! 3D SBS is not essential for me at now :)

[Capsbackup]

Thanks for the new version. I can confirm:
Fixed a problem in which frame rates could be incorrectly reported when importing from an interlaced source. :) :thanks:

[Ch3vr0n]

i'm waiting on that SBS ^^ dying to test it out. would be a major breakthrough in shrinking 3D discs. Aint using DVDCrap.

[Nico8583]

I confirm also angle selection is working fine. Thanks again !
I'll try 3D SBS when it will be avalaible :)

[steveg32]

Just for the sake of accuracy, BD Rebuilder does not encode DTS Express. It simply extracts it from the original stream and then remuxes it into the new stream during rebuild.

I stand corrected. Mahalo jdobbs!