BD Rebuilder Beta - Bug Reports Only

[rendez2k]

Sorry, I think I may have asked this before but can't remember the outcome. I load a BR, blank some audio and video. Is there anyway to tell if my blanking has enabled the remaining content to fit on a BD-25 without compression?

[cinephage]

Silly question but I changed my system to windows7 64 bits and re-installed bd-rebuilder from scratch. After at least 3 years of perfect use.
I can't start it getting this message: "MSCOMCTL.OCX or one of its dependecies not correctly registered a file is missing or invalid"

[xterminater]

jdobbs, I know this question have probably popped up before but I couldn't seem to find an answer. Is there a way we can "make" BD-RB allocate space better, like try to fit as much as the bd-disc can hold? I noticed that whenever I back up a BD-50 to BD-25, it's always around 21-22gb, instead of the maximum 25, which I know isn't really 25gb, but at least closer than that. Is there a hidden setting that I must enter? Also I do not allow hd audio, just dts core for audio.

[Capsbackup]

jdobbs, I know this question have probably popped up before but I couldn't seem to find an answer. Is there a way we can "make" BD-RB allocate space better, like try to fit as much as the bd-disc can hold? I noticed that whenever I back up a BD-50 to BD-25, it's always around 21-22gb, instead of the maximum 25, which I know isn't really 25gb, but at least closer than that. Is there a hidden setting that I must enter? Also I do not allow hd audio, just dts core for audio.

If you select 2 pass encoding, this is the most accurate method. Every disc will be different though, taking into account action scenes, darker movies, many audio tracks, etc... so it is "safer" to stay below the maximum BD-R capacity of about 23.5GB (25,000,000,000 bytes) .
You can try different "CUSTOM_TARGET_SIZE=xxxxxx" settings to try and reach your desired output. :cool:
The visual gain will probably be miniscule at best, but you can fill up that disc to the max if it makes you "feel" better! :o

[RobertM]

Is there a way we can "make" BD-RB allocate space better

The problem is that the actual size after re-encoding cannot be known until the re-encode is complete. Any attempt to calculate the final size before-hand is just an estimate, so you have to leave a little extra headroom or lots of rebuilds would end up being too large to fit on a BD-25. My BD-25 rebuilds end up filling 96% to 97% of the disc, using the default BD-25 target size. I feel that this is close enough to not worry about it.

But you can modify this yourself. Just don't use the standard BD-25 target size; use a custom size instead. I believe that the standard size is 23.5 GB, so you could try 24 GB and see what happens. In my case, I have not seen anything over 97%, so if I used a custom size of 24GB then I might expect a final result around 97% x 24/23.5, or 99.06%. Hmm.... maybe I'll actually give this a try and see what happens.

The only real downside of doing this is that you increase the chances of getting the occasional rebuild that is too big, and you'll have to repeat the rebuild with a smaller target size. Not a big problem, as long as you remember why the oversize is happening.

Caps beat me to the response

[jdobbs]

Silly question but I changed my system to windows7 64 bits and re-installed bd-rebuilder from scratch. After at least 3 years of perfect use.
I can't start it getting this message: "MSCOMCTL.OCX or one of its dependecies not correctly registered a file is missing or invalid"Right click on REG_MSCOMCTL.BAT in the BD-RB folder and say "Run as Administrator".

[omegaman7]

By using 2 - 5% more of a BD disc, you will not see a difference in video quality. And you risk errors on the outer edge of the disc. Plus they take longer to burn. There's no factor which would make me elect to use the full 23.2Gb of Disc space. That's asking for trouble. I prefer go with 22.0 - 22.5Gb. However if I remove audio tracks, and no encoding is required, and I end up around 22.7 - 23.0Gb, that is acceptable. My LG drive seems to have trouble closing LTH discs around the outer edge. Jdobbs hit the estimation algorithm right on the money! :D

[AmigaFuture]

@omegaman7 Some of us ~do~ see a difference with video quality. Typing that "you will not see a difference in video quality" is subjective to personal vision and experience. Some people have to be "shown" the difference. I'm able to walk into a Walmart or some other store and ~KNOW~ the difference between Video or HDMI output. Many "customers" have no idea of what I'm talking about, but there are those that ~get it~ to some degree and express real ~appreciation~. Only relating to visual and not actual media data as you are. ~Smile~ Hehe!

[omegaman7]

Well... to each his own. :p

[Cela]

@jdobbs,
feedback about impact of the new versions, AnyDVD HD 7.0.3.0 and BD-RBV04009:
The new combination still produces the erroneous, false negative 'SourceCheck() 00006 2501', 'Selected source is not BD format' error messages and still prohibits BD-RBV04009 normal processing of my two problem disks.

Regards

[jdobbs]

@omegaman7 Some of us ~do~ see a difference with video quality. Typing that "you will not see a difference in video quality" is subjective to personal vision and experience. Some people have to be "shown" the difference. I'm able to walk into a Walmart or some other store and ~KNOW~ the difference between Video or HDMI output. Many "customers" have no idea of what I'm talking about, but there are those that ~get it~ to some degree and express real ~appreciation~. Only relating to visual and not actual media data as you are. ~Smile~ Hehe! I have a really, really hard time believing that anyone could identify a difference of 2% on a BD-25. I'm not saying its impossible -- but if I were a betting man I'd be willing to bet the farm that it couldn't be identified in a double-blind test...

[jdobbs]

@jdobbs,
feedback about impact of the new versions, AnyDVD HD 7.0.3.0 and BD-RBV04009:
The new combination still produces the erroneous, false negative 'SourceCheck() 00006 2501', 'Selected source is not BD format' error messages and still prohibits BD-RBV04009 normal processing of my two problem disks.

Regards The confusing thing is that I'm not getting any other reports (beyond one or two folks). That routine gets executed on every single disc processed.

[Yordan5]

I have a really, really hard time believing that anyone could identify a difference of 2% on a BD-25. I'm not saying its impossible -- but if I were a betting man I'd be willing to bet the farm that it couldn't be identified in a double-blind test...

Same here. Using BD-RB I shrank the StarWars trilogy (episodes 4, 5 and 6). Each episode was around 35Gb and with BD-RB I shrank them to 13Gb each. No matter how hard I tried to find any degradation in quality I was not able to. I did that on a PC with a 32" Sony monitor and on a 42" Panasonic LED TV. If someone claims they are able to tell the difference due to an extra 2% storage on a 25Gb disk, that is pure fantasy.

[omegaman7]

Perhaps they have eagle eyes?

I may have an idea why some people think they see a difference. I noticed with compressed sources, Hardware enabled playback(E.g. GPU used for playback) can cause an oversimplified colorspace playback. Which can cause a certain level of artifacting in white and dark scenery. When the CPU is used instead, the video is being played exactly as the frame is intended.

[wakko709]

[04/21/12] BD Rebuilder v0.40.09 (beta)
[16:23:53] Source: ZOMBIELAND
- Input BD size: 36.26 GB
- Approximate total content: [03:05:29.975]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[16:23:56] PHASE ONE, Encoding
- [16:23:56] Processing: VID_00011 (1 of 41)
- [16:23:56] Extracting A/V streams [VID_00011]
- [16:33:57] Reencoding video [VID_00011]
- [16:33:57] Reencoding secondary video [TRK_02]
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Not Set correctly
- WIN7 preferred VC-1 CODEC: Not Set correctly
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
what the hell is win7 codec?

[RobertM]

If someone claims they are able to tell the difference due to an extra 2% storage on a 25Gb disk, that is pure fantasy.

You are probably right. But are you also willing to state, equally forcefully, that the 2% larger file is, in fact, no better. If so, then you would be wrong. The difference may be subtle, even imperceptible to lots of people, but it does contain more information, and it is -- technically -- better, whether you, or anyone else, can see it or not. You may feel that this is an "angels on the head of a pin" type of argument, but why should people leave empty space on a BD disc when it could be put to some use. And basing your argument on a 42" display is only valid if you are sitting within 5 feet or so.

[setarip_old]

@Yordan5

Hi! I shrank the StarWars trilogy (episodes 4, 5 and 6). Each episode was around 35Gb and with BD-RB I shrank them to 13Gb each. No matter how hard I tried to find any degradation in quality I was not able to.

I'd suggest that your choice of Blu-ray disc for testing, one with loads of CGI - and shot with digital cameras, is a major contributing factor for the remarkably good high compression results.

When "King Kong" first became available on HD-DVD, the members here (myself included) were equally impressed with the quality of highly compressed versions of it.

See if you get the same remarkably good results when compressing a more "standard", live action only shot on film Blu-ray...

[Yordan5]

You're both (RobertM, setarip_old) technically correct. The argument was that in practical use those 2% extra data on a 25Gb disk would make absolutely no difference to your viewing experience when compressing a movie, on top of the fact that you'd be asking for trouble writing so close to the outer edge of the disk. I only gave the example of the StarWars trilogy to make the point that if I cannot see a difference when there's been more than 40% compression what's the point of running the risk of a coaster for an academic gain. We all know that BD-RB produces results that a nothing short of spectacular and it would take a lot more than 2% (that's half a Gig on 25Gb disk) for most people to actually see a visual difference. Technically we know that there would be a difference but we wouldn't be able to see it. I'd much rather just enjoy the movie instead of trying to ruin the experience looking for miniscule artifacts the whole time.

[lone-warrior]

"Three Colors: Blue" BD from Netflix. Movie only convert to DVD5. Video OK but no audible audio. Log follows:
----------------------
[04/21/12] BD Rebuilder v0.40.09 (beta)
[09:51:35] Source: THREE_COLORS_BLUE
- Input BD size: 26.78 GB
- Approximate total content: [01:38:20.936]
- Target BD size: 4.36 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=448
[09:51:35] PHASE ONE, Encoding
- [09:51:35] Processing: VID_00274 (1 of 1)
- [09:51:35] Extracting A/V streams [VID_00274]
- [10:09:56] Reencoding video [VID_00274]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 141,481 frames
- Bitrate: 5,639 Kbs
- [10:09:56] Reencoding: VID_00274, Pass 1 of 2
- [10:56:22] Reencoding: VID_00274, Pass 2 of 2
- [12:25:13] Video Encode complete
- [12:25:14] Processing audio tracks
- Track 4352 (fra): Reencoding audio to AC3...
[12:26:15]PHASE ONE complete
[12:26:15]PHASE TWO - Rebuild Started
- [12:26:15] Rebuilding AVCHD file Structure
[14:28:28] - Encode and Rebuild complete
[14:28:28] JOB: THREE_COLORS_BLUE finished.
Note: On the the last two lines it was waiting a couple of hours for my reply to override the output folder!
-----------------------------
Workfiles:http://webpages.charter.net/carlospg/Blue-Workfiles.jpg
00274.track_4352.dts has audio OK. However, no audible audio on AUD_00274_4352.mkv, AUD_00274_4352.AC3
-----------------------------
AUD_00274_4352.AVS:
#Created by BD Rebuilder - v0.40.09 (beta)
LoadPlugin("M:\BD_Rebuilder-0.40.09\BD_Rebuilder\tools\nicaudio.dll")
audio=DirectShowSource("M:\1-BDR-BLUE\WORKFILES\AUD_00274_4352.mkv").Amplify(1)
ConvertAudioTo16bit(ResampleAudio(audio, 48000))
-----------------------------
Also, despite selecting 448Kbps audio, output shows 192Kbps
Thanks in advance

[DMagic1]

Sorry I'm a little behind on the progress of BDRebulder. Before I post any bugs I like to know if it is now able to process 3D titles that I'm stripping some extras and audio but not reencoding?


Thanks

[drmih]

Sorry I'm a little behind on the progress of BDRebulder. Before I post any bugs I like to know if it is now able to process 3D titles that I'm stripping some extras and audio but not reencoding?


Thanks

No, as soon as you adjust the streams you'd need to be able to cross reference the 3D data.

[Sky7777]

That is a disc read/write access error... it's possible something (like a path) might be corrupt in the INI file. Try renaming BDREBUILDER.INI to another name temporarily and see if the error goes away.

An error does not go away:(

[AmigaFuture]

I have a really, really hard time believing that anyone could identify a difference of 2% on a BD-25. I'm not saying its impossible -- but if I were a betting man I'd be willing to bet the farm that it couldn't be identified in a double-blind test...

Some blind people hear nuances in sounds and feel vibrations that (most) people who trust their eyes and logical (mosty)...don't hear/feel. Some of these people will teach those of us whom do use our eyes well, but desire to expand that sense, too. I can see the difference between BD-25 and originals, but it's definitely a practiced/focusing thing. I'm also into "audiophile". Transcoding makes it ~much~ easier to see/hear the differences. Rerendering does not. :D

Anyway...I was trying to have some fun with the message but you 2 may not have read it that way.

[Cela]

The confusing thing is that I'm not getting any other reports (beyond one or two folks). That routine gets executed on every single disc processed.Too bad! Then I'll never know the true reasons why my BD was rejected by BDRB and classified as 'non-BD', i.e. which of the numerous checks in that routine (executed on every single disc processed) it did not pass. :confused:

Thanks!

[RobertM]

I've made this request before. It isn't really a "bug", in that we know precisely why this behaviour is happening, but it sure feels like a bug when it happens.

This morning I woke to find that an overnight rebuild had rebuilt the wrong playlist. Before starting a rebuild I always check the "output options" screen to make sure I had selected the right target size. Sometimes I forget that if I make a change between BD-25 and BD-9 that my previous playlist selection (and any specific selections I have made on the "stream" tab) will be thrown out and replaced with a default playlist selection. The "rescanning" message was displayed, of course, but it happens every time we make a change, so it is not a good indicator that something has actually changed.

I can't see why it would be particularly difficult to remember the playlist selection for the rescan. If it cannot be, for whatever reason, then a message dialogue should draw attention to the fact that the playlist has changed. It feels REALLY odd to have the app override a manual selection without some kind of warning. Like I said, when this problem happens -- and it has happened to me many times -- it feels like a bug.

[varekai]

Most likely not a bug in BD-RB but something makes x264 crash.
"H.264 (MPEG-4 AVC) encoder has stopped working..." and BD-RB stops with message "- Failed video encode, aborted".
I've been able to reproduce this on several different encodes.
Maybe the later release version of x264 in build BD-RB v0.40.09 could be the cause?

With build BD-RB v0.40.08 and that earlier version of x264 all encodes works fine.
Did some testings with LinX 0.64 and let it run on high priority for hours without getting any errors.
Monitored power with CPUID HWMonitor and my Corsair 1200W seems to work OK.
CPU temperature on 100% load is 55-60C so no heat issue.
Also uninstalled ffdshow, Hali Matroska Splitter, Avisynth and cleaned registry and then reinstalled.

What could be the cause of x264 crashing? It's probably on my end since there's no reports from other users.

Regards

[busch42]

varekai, I too have the same problem. I had a problem similar to this about 4 weeks ago, So I wiped my hard drive and reinstalled windows 7 64bit then everything worked great, This is the first time I did a Bluray (Contraband) in a few weeks now I'm having your problem after installing Bdrebuilder version 04009. I haven't installed any new programs so I'm not sure what could be causing this. Here's my report If anyone could please help ,
H.264 (MPEG-4 AVC) encoder has stopped
working
A problem caused the program to stop working correctly.

[04/27/12] BD Rebuilder v0.40.09 (beta)
[09:46:06] Source: CONTRABAND
- Input BD size: 32.09 GB
- Approximate total content: [01:49:38.446]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[09:46:06] PHASE ONE, Encoding
- [09:46:06] Processing: VID_00023 (1 of 1)
- [09:46:06] Extracting A/V streams [VID_00023]
- [10:14:32] Reencoding video [VID_00023]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 157,725 frames
- Bitrate: 26,116 Kbs
- [10:14:32] Reencoding: VID_00023, Pass 1 of 1
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[10:43:46] - Failed video encode, aborted

[omegaman7]

Most likely not a bug in BD-RB but something makes x264 crash.
"H.264 (MPEG-4 AVC) encoder has stopped working..." and BD-RB stops with message "- Failed video encode, aborted".
I've been able to reproduce this on several different encodes.
Maybe the later release version of x264 in build BD-RB v0.40.09 could be the cause?



What are some titles you've had trouble with? Please give multiple examples.

[busch42]

omegaman7, The movie I'm trying is Contraband, I did rip it to hard drive with anydvd.

[omegaman7]

I'm afraid I won't have that one for a while. Money is tight :(

I do however have multiple new releases waiting for me.

[busch42]

I tried several programs to shrink the movie Contraband to a BD25 and nothing works, So I'm begining to think it isn't BDrebuilder but maybe a bad rip to hard drive, Has anybody had any luck with this movie?

[setarip_old]

@busch42

Hi! I tried several programs to shrink the movie Contraband to a BD25 and nothing worksIf I remember correctly, if you want to do a "Movie-only" of this disc, you have to first remove what appears to be a secondary video from 00023.m2ts

Have you tried doing a "FULL DISC" copy using the same rip?

[varekai]

What are some titles you've had trouble with? Please give multiple examples.

The problems I'm having with x264 is not related to any particular titles.
Tested with older titles as well as newer.

Regards

[omegaman7]

Well I've ran at least 5 titles without trouble on the newest version. Again, a title (or multiple) would help us pinpoint the problem. E.g. if you run "Tower Heist" and have a problem, then I should run it, and see if I have the same problem.

Obviously Jdobbs felt the new version was ready ;)

[varekai]

@omegaman7

I don't have "Tower Heist" and I'm not planning on getting it.
Made BD-RB v0.40.09 encodes of new title "The Girl with the Dragon Tattoo"
and the old title "Saving Private Ryan" and x264 crashed on both titles.
BD-RB v0.40.08 encodes of the same titles works flawlessly.
Encode settings are identical in both BD-RB versions.
I can't figure out why x264 crashes?

Regards

[Capsbackup]

@omegaman7

I don't have "Tower Heist" and I'm not planning on getting it.
Made BD-RB v0.40.09 encodes of new title "The Girl with the Dragon Tattoo"
and the old title "Saving Private Ryan" and x264 crashed on both titles.
BD-RB v0.40.08 encodes of the same titles works flawlessly.
Encode settings are identical in both BD-RB versions.
I can't figure out why x264 crashes?

Regards

Try switching x264 from BD-RB v0.40.08 and put that one in BD-RB v0.40.09 to see if the newest x264 is causing the problem. ;)

[jdobbs]

Well I've ran at least 5 titles without trouble on the newest version. Again, a title (or multiple) would help us pinpoint the problem. E.g. if you run "Tower Heist" and have a problem, then I should run it, and see if I have the same problem.

Obviously Jdobbs felt the new version was ready ;) I've done about 40 backups using the new version... no issues.

There was a new version of X264 included in the release of BD-RB v0.40.09, so there's always a chance that could be an issue. Since then there is another new version of X264 (http://www.x264.nl/) (revision 2197) out, in case someone thinks they are crashing due to the last release. I just started testing it today. Just remember to only use the 8-bit depth versions. You also have to remember to rename the 64 bit version to x264-64.EXE for BD-RB to see it.

[varekai]

Try switching x264 from BD-RB v0.40.08 and put that one in BD-RB v0.40.09 to see if the newest x264 is causing the problem. ;)

I did think of that but never actually tested because BD-RB System Inspection gives " -X264: Wrong version found"

Regards

[varekai]

I've done about 40 backups using the new version... no issues.

There is a new version of X264 (http://www.x264.nl/) out, in case someone thinks they are crashing due to the last release. Just remember to only use the 8-bit depth versions. You also have to remember to rename the 64 bit version to x264-64.EXE for BD-RB to see it.

:D Thanks, I'll try that new version at once!
So I'll ignore BD-RB System Inspection and give it a go!
Good to see you, been real quiet here lately...

Regards

[jdobbs]

:D Thanks, I'll try that new version at once!
So I'll ignore BD-RB System Inspection and give it a go!
Good to see you, been real quiet here lately...

Regards

Yeah, other work (the kind that actually pays my bills) has been pulling me in several directions lately. I'm on the road a lot and don't have much free time. Hopefully it will quiet down by summer.

[jdobbs]

I did think of that but never actually tested because BD-RB System Inspection gives " -X264: Wrong version found"

Regards Yeah, just ignore it.

[varekai]

Yeah, the real job (the one that actually pays my bills) has been pulling me in several directions lately. I'm on the road a lot and don't have much free time. It should quite down a bit by summer.

I know what you mean, done a lot of touring myself working as a stage crew, eat-work-sleep-travel-eat-work-sleep...
I'm retired now, and summer is just around the corner, thank goodness! :D

Will make a donation to your much appreciated BD-RB project!

Regards

[jdobbs]

eat-work-sleep-travel-eat-work-sleepThat pretty much sums it up. I'm sitting here right now, half-asleep, thinking about that 4:00am wakeup tomorrow.

[wolverine3n8]

Yeah, other work (the kind that actually pays my bills) has been pulling me in several directions lately. I'm on the road a lot and don't have much free time. Hopefully it will quiet down by summer.

It's none of my business but what do you do in real life? Feel free to ignore this btw.

[omegaman7]

Given his expertise (Jealous), I'm sure it's some kind of computer consultant work. Networking, or what not. One day!

[busch42]

setarip_old, No I haven't tried to do a full movie backup, But i read on another site's forum where someone said they did just the main movie with BDrebuilder and had no problems.

[busch42]

jdobbs, I'm going to try the new version of x264, Do I just copy and paste the new one over the old one? If so I noticed in the Bdrebuilder program that the x264 application has no .exe after it.

[omegaman7]

Either it's been renamed, or windows doesn't allow you to see the file extensions. You can change that ;)

[jdobbs]

@busch42

You must have "Hide extensions to known file types" enabled in Windows Explorer's folder options. BD-RB uses the .EXE extension.

[busch42]

Thanks jdobbs, I tried the new version of x264 and this time I got to 17.40%, that's futher then before, I'm doing the bluray movie of Contraband, I don't think it's BDrebuilder's fault because if it was it wouldn't work from the beginning at least you would think that, At least the program starts then just comes up x264 has stopped working.

[setarip_old]

No I haven't tried to do a full movie backup, But i read on another site's forum where someone said they did just the main movie with BDrebuilder and had no problems. Once again:

If I remember correctly, if you want to do a "Movie-only" of this disc, you have to first remove what appears to be a secondary video from 00023.m2ts. Try it.

Try doing a "FULL DISC" copy using the same rip

[busch42]

Thanks setarip_old, I'm getting to that, I just tried to do a full movie and got to 44.60%, That's as far as I ever got, I'm getting closer LOL. What program or how do you remove the secondary video from the first?

[setarip_old]

What program or how do you remove the secondary video from the first? (For "movie-only) you can use tsMuxeR.

1) Create a folder named "Movie_Only_Test" (or anything else you may prefer)

2) Load 00023.m2ts into tsMuxeR.

3)UNcheck the 720x480 video (tsMuxeR will have already eliminated the related DTSExpress audio)

4) Select "Blu-ray disc" from the tabs at the BOTTOM of the tsMuxeR window

5) Browse to "Movie_Only_Test"

6) Click on "Start muxing"

7) If successful, load the "Movie_Only_Test" into BD Rebuilder and process as a "movie only".

[busch42]

Thanks alot setarip_old, tsMuxeR worked great, I'm now running BDrebuilder and will let you know how I make out, There is just one question, There is a site I go to for a guide to show you how to use BDrebuilder and in the settings under Audio Encoding Options he doesn't the box checked that says Keep HD Audio for BD25/ Alternate Intact, But there is some people that say you should have that checked, What is your's and jdobbs opinion? Thanks.

[setarip_old]

@busch42

I don't mean to sound harsh, but this thread is supposed to be exclusively for the reporting and analysis of bugs discovered in BD-RB.

(I personally NEVER keep HD audio)

I'd suggest that for postings that are NOT SPECIFICALLY related to BD-RB bugs, you simply create new threads (with meaningful titles for the threads) - and that way we can all be happy rule-abiding campers ;>}

[busch42]

Sorry setarip_old, Your right I should know better, But just to let you know BDrebuilder still didn't work for me, time to give up.

[SquallMX]

@jdobbs, I found a bug when using x264's internal LAVF for decoding that causes undersized output and (potentially) out of specs streams, basically the demuxed original video is identify by LAVF as 25 fps regardless of the original framerate (23.976), so the bitrate of the output stream (after muxing at the original framerate) is lower than expected by a ~4% (25/23.976 = 1.0427):

- [12:20:18] Reencoding video [VID_00050]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 823 frames
- Bitrate: 13,124 Kbs
- [12:20:18] Reencoding: VID_00050, Pass 1 of 2
- [12:20:42] Reencoding: VID_00050, Pass 2 of 2

http://img19.imageshack.us/img19/8560/namelessj.png

Bitrate as reported by BDInfo.

Name: 00000.MPLS
Length: 0:00:34.284 (h:m:s.ms)
Size: 56,961,024 bytes
Total Bitrate: 13.89 Mbps

VIDEO:

Codec Bitrate Description
----- ------- -----------
MPEG-4 AVC Video 12657 kbps 1080p / 23.976 fps / 16:9 / High Profile 4.1

Is not really that much of a difference, but I wonder if that does not cause compatibility problems since the buffer and the max bitrate of the stream where calculated using a different fps value. I don't have a 29.97 Blu-ray, but if that kind of discs are affected too the file-size differences could be huge (20%).

[techno1]

I've done about 40 backups using the new version... no issues.

There was a new version of X264 included in the release of BD-RB v0.40.09, so there's always a chance that could be an issue. Since then there is another new version of X264 (http://www.x264.nl/) (revision 2197) out, in case someone thinks they are crashing due to the last release. I just started testing it today. Just remember to only use the 8-bit depth versions. You also have to remember to rename the 64 bit version to x264-64.EXE for BD-RB to see it.

I noticed in Windows Task Manager I'm running the x264.exe *32 version and not the 64bit version. I already have a x264-64.exe in the Tool folder. How can I make BD-RB use the 64bit version? It used to use the 64bit version in the past.

[Ch3vr0n]

do you have the option "use LAVF encoding" enabled ?

[NightHawkGuy]

I noticed in Windows Task Manager I'm running the x264.exe *32 version and not the 64bit version. I already have a x264-64.exe in the Tool folder. How can I make BD-RB use the 64bit version? It used to use the 64bit version in the past.

Thats completely normal - since only the 32bit version can use avisynth filters since its 32bit.
The 64bit version of x264 is only used if external filters are not used, in LAVF mode.

[techno1]

Thank you Ch3vr0n and NightHawkGuy for your responses!

I selected the LAVF option and now see x264-64.exe running. Is there an advantage to using internal vs. external filters?

[NightHawkGuy]

Thank you Ch3vr0n and NightHawkGuy for your responses!

I selected the LAVF option and now see x264-64.exe running. Is there an advantage to using internal vs. external filters?

some formats (like interlaced vc-1) may have problems with LAVF and some features such as resizing require avisynth filters and therefore need to use the standard 32bit (nonLAVF) method.
under windows 7 64bit, i find that non-LAVF is often faster in any case with a 6core AMD CPU.
i'd suggest trying an encode both ways and see which is faster on your particular system.

[techno1]

Okay, I turned LAVF on and timed a rebuild of Limitless. x264-64.exe was running at 99%. It took 4.18 hours including time to create an ISO.

Then I unchecked the LAVF option and let it run again. However, x264-64.exe STILL ran at 99%. Not the *32 version as before. This time it took 5.13 hours including time to create an ISO. I'm also running and AMD 6 core CPU.

Obviously I want to enable the LAVF option in the future. It seems there is some latch function that only wants to run the 64 bit version now, with or without the LAVF option.

[hifreak]

I tried 2 movies yesterday Alien 3 and Alien 4. Before that I successfully reencoded Alien and Aliens 2, but these 2 I got video aborted, can it be the new X264?

==========================
[17:57:38] BD Rebuilder v0.40.09 (beta)
[17:57:38] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[17:57:38] PROCESSING BATCH FILE [23]
----------------------
[05-03-12] BD Rebuilder v0.40.09 (beta)
[17:57:39] Source: ALIEN_3
- Input BD size: 25,51 GB
- Approximate total content: [02:24:52.641]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[17:57:40] PHASE ONE, Encoding
- [17:57:40] Processing: VID_00750 (1 of 27)
- [17:57:40] Extracting A/V streams [VID_00750]
- [18:05:39] Reencoding video [VID_00750]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 5.029 frames
- Bitrate: 16.275 Kbs
- [18:05:39] Reencoding: VID_00750, Pass 1 of 2
- [18:07:14] Reencoding: VID_00750, Pass 2 of 2
- [18:10:05] Video Encode complete
- [18:10:05] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [18:10:05] Processing: VID_00752 (2 of 27)
- [18:10:05] Extracting A/V streams [VID_00752]
- [18:11:02] Reencoding video [VID_00752]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 16.081 frames
- Bitrate: 16.469 Kbs
- [18:11:02] Reencoding: VID_00752, Pass 1 of 2
- [18:15:24] Reencoding: VID_00752, Pass 2 of 2
- [18:26:44] Video Encode complete
- [18:26:44] Processing: VID_00753 (3 of 27)
- [18:26:44] Extracting A/V streams [VID_00753]
- [18:26:54] Reencoding video [VID_00753]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.334 frames
- Bitrate: 16.554 Kbs
- [18:26:54] Reencoding: VID_00753, Pass 1 of 2
- [18:27:32] Reencoding: VID_00753, Pass 2 of 2
- [18:29:16] Video Encode complete
- [18:29:16] Processing: VID_00754 (4 of 27)
- [18:29:16] Extracting A/V streams [VID_00754]
- [18:29:27] Reencoding video [VID_00754]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.355 frames
- Bitrate: 16.291 Kbs
- [18:29:27] Reencoding: VID_00754, Pass 1 of 2
- [18:30:05] Reencoding: VID_00754, Pass 2 of 2
- [18:31:46] Video Encode complete
- [18:31:46] Processing: VID_00755 (5 of 27)
- [18:31:46] Extracting A/V streams [VID_00755]
- [18:32:20] Reencoding video [VID_00755]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 9.314 frames
- Bitrate: 16.293 Kbs
- [18:32:20] Reencoding: VID_00755, Pass 1 of 2
- [18:34:55] Reencoding: VID_00755, Pass 2 of 2
- [18:41:33] Video Encode complete
- [18:41:33] Processing: VID_00756 (6 of 27)
- [18:41:33] Extracting A/V streams [VID_00756]
- [18:42:45] Reencoding video [VID_00756]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 19.151 frames
- Bitrate: 16.341 Kbs
- [18:42:45] Reencoding: VID_00756, Pass 1 of 2
- [18:48:13] Reencoding: VID_00756, Pass 2 of 2
- [19:01:51] Video Encode complete
- [19:01:51] Processing: VID_00757 (7 of 27)
- [19:01:51] Extracting A/V streams [VID_00757]
- [19:02:01] Reencoding video [VID_00757]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.053 frames
- Bitrate: 16.568 Kbs
- [19:02:01] Reencoding: VID_00757, Pass 1 of 2
- [19:02:36] Reencoding: VID_00757, Pass 2 of 2
- [19:04:03] Video Encode complete
- [19:04:03] Processing: VID_00758 (8 of 27)
- [19:04:03] Extracting A/V streams [VID_00758]
- [19:04:17] Reencoding video [VID_00758]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 3.281 frames
- Bitrate: 16.140 Kbs
- [19:04:17] Reencoding: VID_00758, Pass 1 of 2
- [19:05:14] Reencoding: VID_00758, Pass 2 of 2
- [19:07:35] Video Encode complete
- [19:07:35] Processing: VID_00759 (9 of 27)
- [19:07:35] Extracting A/V streams [VID_00759]
- [19:07:53] Reencoding video [VID_00759]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 3.243 frames
- Bitrate: 16.237 Kbs
- [19:07:53] Reencoding: VID_00759, Pass 1 of 2
- [19:08:51] Reencoding: VID_00759, Pass 2 of 2
- [19:11:07] Video Encode complete
- [19:11:07] Processing: VID_00760 (10 of 27)
- [19:11:07] Extracting A/V streams [VID_00760]
- [19:11:47] Reencoding video [VID_00760]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 12.286 frames
- Bitrate: 16.383 Kbs
- [19:11:47] Reencoding: VID_00760, Pass 1 of 2
- [19:15:11] Reencoding: VID_00760, Pass 2 of 2
- [19:24:00] Video Encode complete
- [19:24:00] Processing: VID_00761 (11 of 27)
- [19:24:00] Extracting A/V streams [VID_00761]
- [19:24:24] Reencoding video [VID_00761]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 6.950 frames
- Bitrate: 16.468 Kbs
- [19:24:24] Reencoding: VID_00761, Pass 1 of 2
- [19:26:22] Reencoding: VID_00761, Pass 2 of 2
- [19:31:32] Video Encode complete
- [19:31:32] Processing: VID_00762 (12 of 27)
- [19:31:32] Extracting A/V streams [VID_00762]
- [19:31:47] Reencoding video [VID_00762]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 3.597 frames
- Bitrate: 16.348 Kbs
- [19:31:47] Reencoding: VID_00762, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[19:56:45] - Failed video encode, aborted
-----------------------
[19:56:45] PROCESSING BATCH FILE [24]
----------------------
[05-03-12] BD Rebuilder v0.40.09 (beta)
[19:56:53] Source: ALIEN_RESURRECTION
- Input BD size: 29,41 GB
- Approximate total content: [01:56:08.669]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[19:56:54] PHASE ONE, Encoding
- [19:56:54] Processing: VID_00750 (1 of 13)
- [19:56:54] Extracting A/V streams [VID_00750]
[19:59:00]PHASE ONE aborted by user request
[19:59:00] BATCH ABORTED...
==========================
[19:59:00] END - BATCH SEQUENCE
==========================
----------------------
[05-03-12] BD Rebuilder v0.40.09 (beta)
[19:59:32] Source: ALIEN_3
- Input BD size: 25,51 GB
- Approximate total content: [02:24:52.641]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
- Resuming from previously started job.
[19:59:33] PHASE ONE, Encoding
- [19:59:33] Processing: VID_00762 (12 of 27)
- [19:59:33] Reencoding video [VID_00762]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 3.597 frames
- Bitrate: 21.015 Kbs
- [19:59:33] Reencoding: VID_00762, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[19:59:34] - Failed video encode, aborted
----------------------
[05-03-12] BD Rebuilder v0.40.09 (beta)
[20:01:57] Source: ALIEN_RESURRECTION
- Input BD size: 29,41 GB
- Approximate total content: [01:56:08.669]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[20:02:01] PHASE ONE, Encoding
- [20:02:01] Processing: VID_00750 (1 of 13)
- [20:02:01] Extracting A/V streams [VID_00750]
- [20:09:46] Reencoding video [VID_00750]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 6.779 frames
- Bitrate: 21.469 Kbs
- [20:09:46] Reencoding: VID_00750, Pass 1 of 2
- [20:11:42] Reencoding: VID_00750, Pass 2 of 2
- [20:17:06] Video Encode complete
- [20:17:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [20:17:07] Processing: VID_00701 (2 of 13)
- [20:17:07] Extracting A/V streams [VID_00701]
- [20:17:20] Reencoding video [VID_00701]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.085 frames
- Bitrate: 21.283 Kbs
- [20:17:20] Reencoding: VID_00701, Pass 1 of 2
- [20:18:01] Reencoding: VID_00701, Pass 2 of 2
- [20:19:42] Video Encode complete
- [20:19:42] Processing: VID_00751 (3 of 13)
- [20:19:42] Extracting A/V streams [VID_00751]
- [20:21:51] Reencoding video [VID_00751]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 25.970 frames
- Bitrate: 21.229 Kbs
- [20:21:51] Reencoding: VID_00751, Pass 1 of 2
- [20:29:40] Reencoding: VID_00751, Pass 2 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[20:59:03] - Failed video encode, aborted

[Capsbackup]

I tried 2 movies yesterday Alien 3 and Alien 4. Before that I successfully reencoded Alien and Aliens 2, but these 2 I got video aborted, can it be the new X264?

I would try without LAVF selected to see if your results change. Also, try just one at a time rather than "Batch".

[hifreak]

I would try without LAVF selected to see if your results change. Also, try just one at a time rather than "Batch".

Ok Will try what you suggested without batch lavf

[jdobbs]

@hifreak

I'd take a look at any/all system stability factors. The fact that several AVC sources have successfully encoded before having issues leads one to believe it isn't configuration related. Check out anything that might lead to overheating.

[hautem]

BD-Rebuilder works great 99.99% of the time for me on full backup BD's, but every once in a while I hit a brick wall and the "Chinatown" Blu-ray is one of them. Burned the backup only to find out later when watching that at around 1:29:00 into the movie, the audio synch goes out by about 500ms (audio is before the video - corresponding video is around 500ms late) and it stays that way from around 1:29:00 to the end of the film. Audio sync is fine from the beginning up to that point. I'm going on my 7th re-encode trying to figure out what's going on and every single re-encode has that late timing at the same mark.

All BD-Rebuilder system programs are compliant/set correctly using Inspect.exe
BD-Rebuilder encoder settings are Good (Very Fast) - One Pass (ABR) Encoding
Movie is one .m2ts file (00800.m2ts) MPEG-4 (AVC). The original .m2ts file plays fine on my PC via MPC as well as the original Blu-ray disc on a stand-alone Sony BDP-S480.
Out-of-sync re-encodes are confirmed on my PC using either MPC or VLC.
After the 1st bad encode, ripped the original disc a 2nd time using AnyDVDHD 7.0.4.0
Both the original 5.1 main audio and (mono) tracks are TRUE-HD. Initial encode was set to "do not convert/reencode" checked (default) to extract cores.
Commentary track is 2-channel AC3 and ironically the only one that stays in sync from beginning to end
With "do not convert/reencode" checked, tried "Keeping the HD audio..." checked. That's worked before on "multi"-.m2ts movies where I would hear audio interruptions at file transitions on my Sony BDP-S480 when HD audio was down-converted - didn't work here.
Tried just keeping the (mono) TRUE-HD audio track - still the same
Tried substituting the x264.exe converter from the previous version of BD-Rebuilder (BD-RBV04008 - x264 - v2164), but still the same thing. Tried the newest x264 version (2197) - still the same
After one of the encodes, tried extracting the original main TRUE-HD 5.1 track via tsMuxeR 1.10.6, down-converted to AC3, demuxed the re-encode and replaced/muxed to .m2ts with the original down-converted extraction - still the same.

Things I haven't tried yet are movie-only and "do not convert/reencode" unchecked, which I figured was pointless since the core is at 640kbps anyway and that the tsMuxeR 1.10.6 experiment didn't work. If anyone has a clue

Thanks...

[hautem]

Still looking into this "Chinatown" thing and not sure how much of a bearing it has, but when looking at the various files using MediaInfo in PBCore 1.2 view:

00800.m2ts (original file) - <formatDuration>02:10:32.520</formatDuration>
00800.m2ts (re-encoded file) - <formatDuration>02:10:31.782</formatDuration>

with the re-encoded .m2ts file being slightly longer by 262ms

In BDeditv0.17b (not that familiar with how to read BDedit info. - from the playlist tab for 00800.mpls):

00800.m2ts (original file) - 02:10:32.824
00800.m2ts (re-encoded file) - 02:10:31.782

The corresponding extracted AC3 core files in the WORKFILES folder of my latest re-encode in MediaInfo:

00800.track_4352.ac3 (main movie track) - <formatDuration>02:10:31.328</formatDuration>
00800.track_4357.ac3 (commentary track) - <formatDuration>02:10:31.808</formatDuration>

where the audio file lengths are different - by right around the amount I've been guesstimating - 480ms

Maybe I'll try ditching the audio commentary track.

[hautem]

Typo in that last entry...

In BDeditv0.17b:

00800.m2ts (original file) - should have been 02:10:31.824 instead of 02:10:32.824

[bluerip]

Hi Guys,
I tried the movie Immortals (Krieg der Götter) in German.
Got this error.



----------------------
[05.06.12] BD Rebuilder v0.40.09 (beta)
[12:40:49] Source: KRIEG_DER_GOETTER
- Input BD size: 18,97 GB
- Approximate total content: [01:50:43.678]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1920x1080, 640Kbs DD5.1
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=448
[12:40:50] PHASE ONE, Encoding
- [12:40:50] Processing: VID_00084 (1 of 2)
- [12:40:50] Extracting A/V streams [VID_00084]
- [13:04:05] Reencoding video [VID_00084]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 159.264 frames
- Bitrate: 4.848 Kbs
- [13:04:05] Reencoding: VID_00084, Pass 1 of 2
- [14:44:39] Reencoding: VID_00084, Pass 2 of 2
- [18:32:02] Video Encode complete
- [18:32:03] Processing audio tracks
- Track 4352 (deu): Reencoding audio to AC3...
- [18:32:04] Processing audio tracks
- Track 4352 (deu): Reencoding audio to AC3...
- ERROR in attempt to reencode audio (AFTEN) [AUD_00084_4352.AVS]
[18:32:05] - Failed to reencode audio, aborted

Who can help?

[jceden35]

I've used BD-Rebuilder for quite some time and really never had an issue......Unitl recently I've never really gotten an error that I couldn't figure out. I've been backing up my collection of Blurays for a while now (whenever I get a chance) and have always been realitvely successful. However using the latest Beta Ver. 40.09 I'm unable to successfully back up my 3D versions of my collection. Here's basically what happens:

I put my original in and run AnyDvd/HD and it will play (do this to test). I then rip the entire disc to an ISO. I then mount the ISO and run it again (while AnyDvd/HD is in the background) and play it to again make sure it plays while mounted in the ISO format. I then turnoff AnyDvd/HD and run BD-Rebuilder. The software see's the movie and I check off the few options like 25GB file and turn into an ISO using Image Burn...........

Here's where the mystery comes. It does everything like normal, doesn't come up with any errors and then creates an ISO via Image Burn........However when I either burn to a Disc or Mount it as an Image when it has been compressed under 25GB the image will not play either in my PS3 (under a year old with newest firmware) or on my media PC using PowerDVD 11 (latest update). In the PC it tries to load forever and on the Media PC running PowerDVD 11 Ultra it says that "Cyberlink Power DVD could not read a file on this disc, playback will stop"

Any other Bluray I back up in my collection will playback fine. It is only the 3D blurays that are having the error/problems.

Any Ideas.........?

Rig Specs:

Bluray Burner: LG GBW-H20L
Processor FX-8120
Hard Drives 128GB Kingston SSD & Hitachi 1TB Sata II ATA
Memory: 16GB Dual Channel

[CV91913]

BD-Rebuilder works great 99.99% of the time for me on full backup BD's, but every once in a while I hit a brick wall and the "Chinatown" Blu-ray is one of them. Burned the backup only to find out later when watching that at around 1:29:00 into the movie, the audio synch goes out by about 500ms (audio is before the video - corresponding video is around 500ms late) and it stays that way from around 1:29:00 to the end of the film. Audio sync is fine from the beginning up to that point. I'm going on my 7th re-encode trying to figure out what's going on and every single re-encode has that late timing at the same mark.



I had exactly the same problem at exactly the same place. If you watch the movie carefully at that point in the movie, there is a very slight freeze in the video but the audio is not effected. So...from that point on the audio leads the video. I was able to finally get the movie to backup without the problem (after many tries with various audio settings.) I used BDRB directly on the original BluRay disc. I loaded AnyDVD and did movie only build directly from the BluRay. It took a bit longer but it did work. Not too sure why. HTH.

[jdobbs]

jceden35...

I had exactly the same problem at exactly the same place. If you watch the movie carefully at that point in the movie, there is a very slight freeze in the video but the audio is not effected. So...from that point on the audio leads the video. I was able to finally get the movie to backup without the problem (after many tries with various audio settings.) I used BDRB directly on the original BluRay disc. I loaded AnyDVD and did movie only build directly from the BluRay. It took a bit longer but it did work. Not too sure why. HTH. That has to mean the rip didn't go straight when it was copied to hard drive. Not sure how that could happen -- I've never experienced it myself.

[CV91913]

That has to mean the rip didn't go straight when it was copied to hard drive. Not sure how that could happen -- I've never experienced it myself.

Yep...it was a first for me too. I re-ripped it but the problem existed in the original even though the original would play with the slight freeze...but it did not screw up the sound. Go figa.

[hautem]

That has to mean the rip didn't go straight when it was copied to hard drive. Not sure how that could happen -- I've never experienced it myself.

@CV91913 and @jdobbs - thanks much for the feedback, but it's been such a long time that I've had a bad original disc, I'd forgotten that it can cause this type of problem. The 3rd and 4th rips to my hard drive showed noticeable pixelization in the lower section of the frame at 01:29:01 when playing the original .m2ts file on MPC-HC (VLC is apparently more forgiving as is my stand-alone player). Odd that the pixelization wasn't visible on the 1st and 2nd rips. I'll have to see about getting a replacement disc.

Thanks...

[The_Unknown]

As the log indicates, I would suggest you reset "Remove Short Titles" and "Remove Annoying Adverts" in AnyDVD to off, and rerip. Those settings are considered "preprocessing" and is likely the source of your problem -- or at least a contributing factor. If you want to remove those types of things, I would suggest you do so within BD-RB.

Concerning this I have to say that the option "Remove Annoying Adverts" never caused problems with any BD Rebuilding (I've done about 80 rebuilts). It's rather "Remove Short Titles" which causes the trouble.

[jdobbs]

Concerning this I have to say that the option "Remove Annoying Adverts" never caused problems with any BD Rebuilding (I've done about 80 rebuilts). It's rather "Remove Short Titles" which causes the trouble.

I've had issues reported with both, and that's why I can't support bug reports when either of them is set... Sorry.

[[SLiM]D12]

I know this is gonna sound weird, but hear me out. I know we can convert the DTS streams to AC3 and whatnot. Do we have options to convert to PCM? I've converted my audio to PCM and when i mux back into my m2ts file, the audio doesn't play. I know there's more to it, changing mpls files or whatever, just looking for some help.

[jdobbs]

D12;1574219']I know this is gonna sound weird, but hear me out. I know we can convert the DTS streams to AC3 and whatnot. Do we have options to convert to PCM? I've converted my audio to PCM and when i mux back into my m2ts file, the audio doesn't play. I know there's more to it, changing mpls files or whatever, just looking for some help. Not sure why you'd want to convert DTS to WAV? The WAV couldn't sound any better than DTS (since it would be derived from DTS) -- so why make it bigger?

[omegaman7]

Sometimes converting to other formats is beneficial. Take Nero Vision (9)for instance. It doesn't like MKV files. But MKV2VOB can output to AVCHD/M2TS without encoding(use it for inserting Black bars). Apparently the program need only change a few bits of data :D OGG audio or FLAC isn't very common. But MP3 and Wav are ;) Perhaps this is a bad example though. I certainly have no current need to convert DTS to WAV.

[[SLiM]D12]

Just trying to figure something out.

So I've taken my PCM file, and muxed back into a new m2ts. I've replaced the m2ts file in my bd structure with this new file, as well as the cpli file that was created.

Still no audio. Am I missing something else?

[jdobbs]

Both the MPLS file and the CLPI reference the type of audio in the M2TS file. In fact, its possible that more than one MPLS could do so.

[Sharc]

I usually do 1-pass CRF predictive encoding with good results. While in very most cases of single-segment sources the prediction steps look "reasonable" and the target size is met with good accuracy, I run into a couple of problems with segmented sources. For most of the segments -- even for the short ones of 1000...5000 frames -- the CRF prediction process looks reasonable (5 .... 10 steps) resulting in final CRF values around 18. However, for some segments the final CRF value is obtained in 1 single step producing IMO "skewed" final CRF values. Examples:

- [11:49:12] Processing: VID_00459 (5 of 23)
- [11:49:12] Extracting A/V streams [VID_00459]
- [11:49:29] Reencoding video [VID_00459]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2'798 frames
- Convert: 1280x720, 23.976fps, 2'798 frames
- [11:49:29] Performing CRF Prediction...
- Analyzing 19.00 [34.50]
- [11:49:41] Encoding using constant rate factor.

- [12:46:31] Processing: VID_00465 (11 of 23)
- [12:46:31] Extracting A/V streams [VID_00465]
- [12:46:52] Reencoding video [VID_00465]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3'563 frames
- Convert: 1280x720, 23.976fps, 3'563 frames
- [12:46:53] Performing CRF Prediction...
- Analyzing 19.27 [14.63]
- [12:47:04] Encoding using constant rate factor.

- [14:11:52] Processing: VID_00473 (19 of 23)
- [14:11:52] Extracting A/V streams [VID_00473]
- [14:12:21] Reencoding video [VID_00473]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5'240 frames
- Convert: 1280x720, 23.976fps, 5'240 frames
- [14:12:21] Performing CRF Prediction...
- Analyzing 19.15 [14.58]
- [14:12:35] Encoding using constant rate factor.

I played with SAMPLE_GROUP and SAMPLE_SIZE but still get these 1-step predictions for some of the segments.

Are these skewed single-step predictions possibly a bug in the algorithm (early termination of the prediction cycle?)

[jdobbs]

Hmmm... not sure how that could happen. It looks like it gets close to the target size with the first CRF, and does one more tweak before encoding -- which for some reason swings it way off-kilter. I'll take a look at it.

[[SLiM]D12]

Both the MPLS file and the CLPI reference the type of audio in the M2TS file. In fact, its possible that more than one MPLS could do so.

Ok when i load the MPLS in BDInfo, it shows the proper audio LPCM audio.

Any other ideas on how i can acomplish this? really appreciate it.

[jdobbs]

D12;1574305']Ok when i load the MPLS in BDInfo, it shows the proper audio LPCM audio.

Any other ideas on how i can acomplish this? really appreciate it.

What are you using to play it back? If you're trying to play it on your PC, you may want to check the FFDSHOW Audio Decoder Configuration and make sure "Uncompressed" audio is set to "All Supported".

[[SLiM]D12]

What are you using to play it back? If you're trying to play it on your PC, you may want to check the FFDSHOW Audio Decoder Configuration and make sure "Uncompressed" audio is set to "All Supported".

On PowerDVD and PS3 it's showing no audio stream at all. When I use Total Media Theatre, it's showing up as expected...

PS3 is in my intended player of course.

[phoskins]

Using BD-RBv04009 everything seems to go fine during reading and compression, when ImgBurn (V2.0.7.0) burns the disc, it only burns 50% of the movie. Did not encounter this problem with V04008. Any suggestions? Thanks!!

[jdobbs]

Using BD-RBv04009 everything seems to go fine during reading and compression, when ImgBurn (V2.0.7.0) burns the disc, it only burns 50% of the movie. Did not encounter this problem with V04008. Any suggestions? Thanks!! Gotta' be something else... BD-RB hasn't changed in that area in a long, long time -- and frankly, it does nothing but wait for ImgBurn to complete anyway.

[phoskins]

BD-RBv04008 was superceeded by BD-RBv04009 recently. Using V09, everything seems to go fine during reading and compression, when ImgBurn (V2.0.7.0) burns the disc, it only burns 50% of the movie. I am using a new clean copy of imgburn 2570 and the subprograms with the suggested changes. Still doesn't work. RD-RB say to set MPG2 in Video Decoder Configuration in FFDSHOW to "enabled" but "enabled" is not an option. The options are "libavcodec", "libmpeg2" and "disabled". As I mentioned, the only change made was from v04008 to v04009. I'm using a new copy of RD-RB v04009 as well. Is there any way I can go back to RD-RB V04008? When I try to use it I receive a message indicating that v04008 is gone and I must us V04009.
Any suggestions? Thanks!!

[RobertM]

Why don't you just have BDRB rebuild the movie and stop there. Then launch ImgBurn yourself, manually, and try burning it.

[worknstiff]

@ phoskins RE: ImgBurn (V2.0.7.0) burns the disc, it only burns 50% of the movie.

Have you even looked at the finished rebuild to see if it indeed has the complete movie??? Thats the place I would look at first instead of thinking ImgBurn lost 50% of what was being burned.

[[SLiM]D12]

@jdobbs

The reason i'm doing this is because i'm trying to backup my cinavia title of Zookeeper. Kids keep scratching it, and i want one that will play in the PS3. So i'm using this to do it:

http://forum.doom9.org/showthread.php?p=1468333#post1468333

Originally Posted by 3r1c
I am the author of that program.
It doesn't convert/transcode to PCM, it does SPDIF conversion.
The PS3 "thinks" its playing a PCM, but really its bitstreaming a DTS to the amp.
Source code
http://www.3r1c.eu/mkv2vob/dtsinpcm.c
I can assure you it does work.

This particular method may not be very useful for anydvd though, it only works on ps3 and requires an external DTS amp, otherwise you just get static.

Basically it does what he says, takes the DTS and fools the PS3 into thinking it's PCM and cinavia doesn't kick in. I've compiled his code, and managed to get a PCM track of my movie.

So i'm just wanting to change my bluray output from having DTS-HD or AC3 and making it PCM instead. Not working though.

Thanks in advance for your help!

[worknstiff]

Man! Sony just keeps shooting themselves in the foot with all this crap, it's hard to see how they can justify doing this to all the PS3 owners that just want to watch a bluray. I hope someone can get them to see what a mistake it is to treat their paying customers like this, and watch the only product they are making money on become irrelevant. On another note, I usually keep the HD Audio when I'm converting to a BD if it only uses like 3 or 4 gigs of space, but on this title there is like 9 episodes with TRUE-HD audio that adds up to quite a bit of audio space on a 3 plus hour disk. I took the checks out of all the keep HD audio settings and the log show that BD_RB is keeping only the HD Core, but the finished BD has only 484 bit audio instead of the 640 I was expecting. Is there a setting somewhere I'm missing??? thanks, worknstiff

[phoskins]

I hear you. Just seems odd that the only thing that I can see that changed was going from v04008 to v04009. I'll play with it to see if I can get it to work. Thank you sir!

[Glarioo]

Last couple of days i'm using the Alternate Movie-Only Output, MKV Container 1920x1080, 640 Kbs DD 5.1.
Why? My Dune H1 handles these MKV files better than BD files, both made with BD Rebuilder. Trying out the CRF mode in different settings (CRF 21, 20, 19). What strikes me is the big difference between CRF 20 and 19, both file size and bitrate.
When i convert "When We Need To Talk About Kevin" with CRF 20 i get a file size of 9.24GB with a maximum bit rate of 15 Mbps, then i used CRF 19: file size = 12GB, maximum bit rate = 30 Mbps. When i open the files with MediaInfo max. birate is set to this values (vbv_maxrate=15000 or 30000) in the encoding settings. I'm not specialised in these things but it seems more logical to me: CRF 21 vbv_maxrate=15000, CRF 20 vbv_maxrate=20000, ...
My question: can i set it manual to an higher max bitrate? (for example CRF 20 with vbv_maxrate=20000).
If so, i can try it out to see there's a noticeable better image quality.

[sreemv]

Wrong thread - moved it

[Audiophile1178]

jdobbs,

First of all, Thank you for this great program! My settings are full backup, high quality two pass encoding, with x264's internal LAVF for decoding checked and DTSX_ENABLE=1 in my BDREBUILDER.INI. I only use the programs that you tell me to use on the first page. My system is windows 7 x64 with 8 gigs of memory.



I'm backing up the mummy trilogy. It seems that they all have pip. Here's my list of problems that maybe you can help me fix:

Mummy 1:Original PIP is 480p but BDRebuilder encodes as 480i? There is no sound from the BDRebuilder PIP.

Original Disc:VIDEO:

Codec Bitrate Description
----- ------- -----------
VC-1 Video 0 kbps 1080p / 23.976 fps / 16:9 / Advanced Profile 3
VC-1 Video 0 kbps 480p / 23.976 fps / 4:3 / Advanced Profile 2

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
DTS Audio Portuguese 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Czech 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Hungarian 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Spanish 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Polish 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
Dolby Digital Audio Russian 448 kbps 2.0 / 48 kHz / 448 kbps / DN -4dB / Dolby Surround
Dolby Digital Audio Thai 448 kbps 2.0 / 48 kHz / 448 kbps / DN -4dB / Dolby Surround
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit

BDRebuilder: VIDEO:

Codec Bitrate Description
----- ------- -----------
MPEG-4 AVC Video 0 kbps 1080p / 23.976 fps / 16:9 / High Profile 4.1
MPEG-4 AVC Video 0 kbps 480i / 23.976 fps / 4:3 / Main Profile 3.2

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit


Mummy 2:Original PIP is 480p but BDRebuilder encodes as 480i? There is no sound from the BDRebuilder PIP.

Original Disc:
VIDEO:

Codec Bitrate Description
----- ------- -----------
VC-1 Video 0 kbps 1080p / 23.976 fps / 16:9 / Advanced Profile 3
VC-1 Video 0 kbps 480p / 23.976 fps / 4:3 / Advanced Profile 2

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
Dolby Digital Audio Portuguese 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Czech 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Hungarian 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Spanish 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Polish 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Russian 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit
Dolby Digital Audio Thai 192 kbps 2.0 / 48 kHz / 192 kbps / DN -4dB / Dolby Surround
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / DN -4dB / Dolby Surround

BDRebuilder:
VIDEO:

Codec Bitrate Description
----- ------- -----------
MPEG-4 AVC Video 0 kbps 1080p / 23.976 fps / 16:9 / High Profile 4.1
MPEG-4 AVC Video 0 kbps 480i / 23.976 fps / 4:3 / Main Profile 4.1

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / DN -4dB / Dolby Surround


Mummy 3:There is no sound from either PIP but the BDrebuilder PIP encode is in 480p.

Original Disc:
VIDEO:

Codec Bitrate Description
----- ------- -----------
MPEG-4 AVC Video 0 kbps 1080p / 23.976 fps / 16:9 / High Profile 4.1
MPEG-4 AVC Video 0 kbps 480p / 23.976 fps / 16:9 / High Profile 3.2
MPEG-4 AVC Video 0 kbps 480p / 23.976 fps / 16:9 / High Profile 3.2

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
Dolby Digital Audio Portuguese 384 kbps 5.1 / 48 kHz / 384 kbps / DN -4dB
Dolby Digital Audio Czech 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Hungarian 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Spanish 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Polish 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Russian 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio Thai 448 kbps 5.1 / 48 kHz / 448 kbps / DN -4dB
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / DN -4dB / Dolby Surround
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit

BDRebuilder:
VIDEO:

Codec Bitrate Description
----- ------- -----------
MPEG-4 AVC Video 0 kbps 1080p / 23.976 fps / 16:9 / High Profile 4.1
MPEG-4 AVC Video 0 kbps 480p / 23.976 fps / 16:9 / Main Profile 3.2
MPEG-4 AVC Video 0 kbps 480p / 23.976 fps / 16:9 / Main Profile 3.2

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / DN -4dB / Dolby Surround
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit

[drmih]

I have done all of the Mummy trilogy and the PiP works fine if you have a player which can handle it.

[Audiophile1178]

I have done all of the Mummy trilogy and the PiP works fine if you have a player which can handle it.

I tested this info using PowerDVD 11 and OPPO BDP-83 player. I went into the OPPO settings to allow secondary audio. I only tested the mummy 2 with my oppo as I quickly became aware of the problem and halted burning the other two discs. PowerDVD 11 plays all the originals back fine but not the backups.


BTW, did you keep all the audio languages or just the english like me?

[Scorpio1]

Well I have a major problem with 4009, it will start to process the main movie stream and about 20 minutes in will TURN OFF my pc, no warning, no error message, just turns the PC off.

The log doesn't indicate any error and BdRebuilder v 3907 works perfectly.

Also this is on my i7 Quad Core, annoyingly it works perfectly on my old P4 3.2.

Why do the older beta's expire? at least if they didn't I would be able to go back to a previously working version in this sort of circumstance, as it is I now can't shrink 50gb to 25gb. I am NOT expecting something for nothing and I WILL purchase a copy of BdRebuilder once released, in fact I think so highly of the program that I have already donated (twice).

Any chance of having a version of the 3907 version that doesn't expire until this problem is fixed please?

The movie I am trying to shrink at the moment is Transporter 3, although BdRebuilder 4009 exhibits this behaviour with ALL blu rays.

I have reinstalled everything needed for BDrebuilder to work, including avisynth, haali, and FFDshow, I have even tried a clean install with JUST BdRebuilder and the other necessary programs and BdRebuilder stiill just physically turns off my PC, it's just like holding in the power button, it's transcoding away then all of a sudden bang, the computers off. Very frustrating for such a brilliant program, with which I have had NO Problems until now.

[RobertM]

about 20 minutes in will TURN OFF my pc, no warning, no error message, just turns the PC off.

Pretty unlikely that this has anything to do with BDRB. A serious programming bug will crash an application, a worse bug will cause a BSOD (blue screen). But when your system just suddenly turns off this is almost always caused by overheating. Your processor is protecting itself from being permanently damaged by too high a temperature.

A BD-Rebuild will start out using moderate resources (during the stream extraction), but once it calls X264 to do the actual video re-encoding the temps will quickly rise, with the second pass (of a 2-pass encode) being the most intense.

I would suggest running a temp monitoring program (something like RealTemp) while you do an encode, and see what the temps get to. Anything below 60c is great, below 80c is fine, 90c is pushing it, and at 100c (depending on your processor) your system will suddenly turn off.

Now clean you heat sink, make sure that all your fans are working, and repeat the process to see if this reduces temps.

[jdobbs]

I agree with RobertM. If your system is turning itself off it is highly unlikely it has anything to do with BD-RB. It could be overheating (as he mentioned), or it could be some other concurrent app calling for system shutdown. As for the report that it works if you go back a couple version... not sure how that could happen unless there has been a change in settings (e.g. setting multiprocessing could make your system run hotter). There has also been an update to X264 -- but if there were issues there I would expect to hear a lot of reports, as the i7 is a very popular processor.

As for turning off expirations... not yet. If I do that I'd have to keep saying "that was fixed 6 versions ago" for all the outdated reports. That's just more of a headache than I want to endure -- especially when it's under my control. I specifically added the timeout because of my problems with that exact scenario when developing DVD Rebuilder.

I do think the software has gotten to a fairly stable state, though, so I expect I'll be turning the expiration off and releasing v1.00 reasonably soon.

[jdobbs]

@Audiophile1178

I'll check out one of the Mummy movies and test the 480i/p report. As for it not playing back sound... there is still an issue with DTS Express -- that's the reason I have it supported only via hidden option. I've done a lot of analysis and haven't been able to put my finger on where the issue is... some players accept it and play back fine -- others don't. I'm certain I'm missing something in the remux or update, but I just haven't been able to find what that "something" is.

[varekai]

Well I have a major problem with 4009, it will start to process the main movie stream and about 20 minutes in will TURN OFF my pc,
no warning, no error message, just turns the PC off.

Some time ago I had some issues with BD-RB 0.40.09 and H.264 (MPEG-4 AVC) crashing.
The odd thing is BD-RB 0.40.08 worked OK.
Did some troubleshooting and ended up with lowering the overclocking of
my i7 2600K from 4.5Ghz to 4.4Ghz and voilà!
No more H.264 crash! BD-RB 0.40.09 works like a charm!

[Scorpio1]

First of all thanks to all who replied saying that temperature was probably the reason that my PC suddenly shuts down without warning.

4 problems with this theory.:-

1) It's watercooled and never goes above 38 c even under full load.

2) If I install XP instead of 7 it doesn't crash at all, works a charm. Put Win 7 on it and I am back to the turning off about 20 minutes in. BUT ONLY if I install WIN XP using fat32, ntfs creates the same behaviour.

3) I can play games that will push the CPU and GPU to their limits and the PC will behave impeccably, sometimes for many hours at a time.

4) The PC didn't exhibit this behaviour with v 3907 installed. I am fairly certain if I was able to go back to 3907, the problem would disappear.

Oh and I am NOT overclocking the CPU and memory are stock timings and voltage and at the moment the ONLY programs installed are BdRebuilder, Haali. AVI Synth and Matroska.

Very frustrating, PC is monitored and logged and temp never goes above 38 c, but this bizzare behaviour continues, it did not happen with 3907 though. The only way to be sure is to go back to 3907, which is why I asked if it was possible to stop 3907 telling me it has been superceeded.

[RobertM]

It's watercooled and never goes above 38 c even under full load

Well, temps probably aren't the issue then.

But remember that x264 encoding is more demanding than just about anything else you can do, including gaming. Have you taken a look at the CPU usage to see if it spikes right before the 20 min crash?

Regarding BDRB 3907, can you fool it into working by just setting your clock back?

Also, you could try replacing the version of x264 that comes with 4009 with the one that came with 3907, to eliminate one more variable.

[varekai]

Also, you could try replacing the version of x264 that comes with 4009 with the one that came with 3907, to eliminate one more variable.

The x264 version (2184) that came with BD-RB 0.40.09 was probably causing the issue I had.
Never had any heat problems, temp always around 50-55°C on 100% load for hours.

[Cela]

I use BD-RB v0.40.09 (beta) and Output Options>Custom Target Size (7700MB). In BD-RB Setup>Audio Encoding Options>'Do not reencode AC3 (Blu-Ray only)' is the only option checked. (The option 'Do not convert DTS to AC3 (Blu-Ray only)' is unchecked.)

But I get some audio results which, IMHO, do not correspond to what I should get according to what I read in the FAQ explanation of the 'Audio checkboxes under SETUP' ( BD Rebuilder (BD-RB) Frequently Asked Questions (forum.doom9.org/showthread.php?t=157143) ).

1. From my Audio Encoding Options settings I expected that this DTS would be converted to AC3 640 kbps! Am I wrong?

- [06:26:08] Processing audio tracks
- Track 4352 (eng): Keeping original audio <---
where this track is:
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Codec ID : 130
Duration : 11mn 5s
Bit rate mode : Constant
Bit rate : 1 510 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE

The FAQ states 'Important note: Choosing to keep DTS on AVCHD output violates the AVCHD standard and can result in a disc that will not play on some players.' I have checked 'Strict AVCHD for BD-5/9 Movie Only'. I am doing a full backup and my Custom Target Size (7700MB) is well within BD-5/9 size, isn't it? Doesn't the FAQ statement 'choosing to keep DTS on AVCHD output violates the AVCHD standard' also hold for full backups. Anyway, I did not choose to keep DTS.

2. My LPCM 2.0 audio is converted to 192KBs!
From my Audio Encoding Options settings I expected that 'LPCM is always converted to AC3' (FAQ) 224Kbs for 2.0. Why do I get 192Kbs for 2.0?
Why is there no option to select 448Kbs or the default 640Kbs for LPCM 2.0 to AC3 2.0 conversion?

IMHO, even with the FAQ, the Audio checkboxes under SETUP are a little confusing.

3. Wouldn't it be easier for the user to choose from a more explicit audio option selection table?
Example:
Keep HD audio? > Yes / NO
Convert DTS to AC3? > 640Kbs / 448Kbs / 224KBs / 192KBs / NO
Convert LPCM to AC3? > 640Kbs / 448Kbs / 224KBs / 192KBs / NO
...

Higher bitrates than 192 KBs for LPCM to AC3 conversion are especially needed for those concert/opera BDs which only have LPCM audio.

4. Audio/Video Bitrate Calculation _before_ video processing:
I would prefer if the audio/video bitrate calculations and/or the audio part were processed _before_ the time consuming video encoding. Then the audio processing could be checked and corrected immediately. Now, many hours of video encodings have to be redone if the audio choices need correction.

Please make the audio processing choices more unambiguous, easier to understand and predictable for the common user. I am convinced, in the long run, it will pay back by less user errors and less users, like me, calling for support and help.

Please remember, I very much appreciate your great work and program!

[pichu69]

this happens when the bluray contains different videos in the same M2TS (1080 and 420)

[05/17/12] BD Rebuilder v0.40.09 (beta)
[22:56:40] Source: BDRA
- Input BD size: 39.14 GB
- Approximate total content: [03:51:20.165]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Quality: High-Speed Option (BD-25), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[22:56:40] PHASE ONE, Encoding
- [22:56:40] Processing: VID_00312 (1 of 52)
- [22:56:40] Extracting A/V streams [VID_00312]
- [22:56:53] Reencoding video [VID_00312]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 10,935 frames
- Bitrate: 2,526 Kbs
- [22:56:53] Reencoding: VID_00312, Pass 1 of 1
- [22:57:49] Video Encode complete
- [22:57:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [22:57:49] Multiplexing M2TS
- [22:58:01] Processing: VID_00313 (2 of 52)
- [22:58:01] Extracting A/V streams [VID_00313]
- [22:58:13] Reencoding video [VID_00313]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 8,170 frames
- Bitrate: 2,863 Kbs
- [22:58:14] Reencoding: VID_00313, Pass 1 of 1
- [22:58:54] Video Encode complete
- [22:58:54] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [22:58:54] Multiplexing M2TS
- [22:59:00] Processing: VID_00314 (3 of 52)
- [22:59:00] Extracting A/V streams [VID_00314]
- [22:59:20] Reencoding video [VID_00314]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 11,785 frames
- Bitrate: 2,858 Kbs
- [22:59:20] Reencoding: VID_00314, Pass 1 of 1
- [23:00:17] Video Encode complete
- [23:00:17] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:00:17] Multiplexing M2TS
- [23:00:26] Processing: VID_00315 (4 of 52)
- [23:00:26] Extracting A/V streams [VID_00315]
- [23:00:48] Reencoding video [VID_00315]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 17,425 frames
- Bitrate: 2,846 Kbs
- [23:00:48] Reencoding: VID_00315, Pass 1 of 1
- [23:02:13] Video Encode complete
- [23:02:13] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:02:13] Multiplexing M2TS
- [23:02:26] Processing: VID_00316 (5 of 52)
- [23:02:26] Extracting A/V streams [VID_00316]
- [23:02:37] Reencoding video [VID_00316]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 7,040 frames
- Bitrate: 2,551 Kbs
- [23:02:37] Reencoding: VID_00316, Pass 1 of 1
- [23:03:14] Video Encode complete
- [23:03:14] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:03:14] Multiplexing M2TS
- [23:03:21] Processing: VID_00317 (6 of 52)
- [23:03:21] Extracting A/V streams [VID_00317]
- [23:03:34] Reencoding video [VID_00317]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 4,028 frames
- Bitrate: 6,945 Kbs
- [23:03:34] Reencoding: VID_00317, Pass 1 of 1
- [23:03:53] Video Encode complete
- [23:03:53] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:03:53] Multiplexing M2TS
- [23:04:01] Processing: VID_00321 (7 of 52)
- [23:04:01] Extracting A/V streams [VID_00321]
- [23:04:51] Reencoding video [VID_00321]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 14,410 frames
- Bitrate: 4,784 Kbs
- [23:04:51] Reencoding: VID_00321, Pass 1 of 1
- [23:06:07] Video Encode complete
- [23:06:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:06:07] Multiplexing M2TS
- [23:06:25] Processing: VID_00323 (8 of 52)
- [23:06:25] Extracting A/V streams [VID_00323]
- [23:06:35] Reencoding video [VID_00323]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 7,400 frames
- Bitrate: 2,573 Kbs
- [23:06:35] Reencoding: VID_00323, Pass 1 of 1
- [23:07:11] Video Encode complete
- [23:07:11] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:07:11] Multiplexing M2TS
- [23:07:17] Processing: VID_00324 (9 of 52)
- [23:07:17] Extracting A/V streams [VID_00324]
- [23:08:38] Reencoding video [VID_00324]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 35,815 frames
- Bitrate: 4,704 Kbs
- [23:08:38] Reencoding: VID_00324, Pass 1 of 1
- [23:11:56] Video Encode complete
- [23:11:56] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:11:56] Multiplexing M2TS
- [23:12:31] Processing: VID_00325 (10 of 52)
- [23:12:31] Extracting A/V streams [VID_00325]
- [23:12:45] Reencoding video [VID_00325]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,615 frames
- Bitrate: 2,605 Kbs
- [23:12:45] Reencoding: VID_00325, Pass 1 of 1
- [23:13:14] Video Encode complete
- [23:13:14] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [23:13:14] Multiplexing M2TS
- [23:13:19] Processing: VID_00328 (11 of 52)
- [23:13:19] Extracting A/V streams [VID_00328]
- [23:13:29] Reencoding video [VID_00328]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 7,200 frames
- Bitrate: 3,010 Kbs
- [23:13:29] Reencoding: VID_00328, Pass 1 of 1
- [23:15:31] Video Encode complete
- [23:15:31] Processing audio tracks
- [23:15:31] Multiplexing M2TS
- [23:15:38] Processing: VID_00333 (12 of 52)
- [23:15:38] Extracting A/V streams [VID_00333]
- [23:35:18] Reencoding video [VID_00333]
- [23:35:18] Reencoding secondary video [TRK_02]
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[23:35:28] - Failed video encode, aborted


BD info that M2TS fails

VIDEO:

Codec Bitrate Description
----- ------- -----------
VC-1 Video 0 kbps 1080p / 23.976 fps / 16:9 / Advanced Profile 3
VC-1 Video 0 kbps 480p / 23.976 fps / 4:3 / Advanced Profile 2
VC-1 Video 0 kbps 480p / 23.976 fps / 16:9 / Advanced Profile 2

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
DTS Audio French 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio French 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio German 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Italian 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Japanese 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Spanish 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Spanish 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
Dolby Digital Audio Chinese 384 kbps 5.1 / 48 kHz / 384 kbps
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / Dolby Surround
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / Dolby Surround
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit

SUBTITLES:

Codec Language Bitrate Description
----- -------- ------- -----------
Presentation Graphics English 0.000 kbps
Presentation Graphics English 0.000 kbps
Presentation Graphics English 0.000 kbps
Presentation Graphics English 0.000 kbps
Presentation Graphics Chinese 0.000 kbps
Presentation Graphics Chinese 0.000 kbps
Presentation Graphics Chinese 0.000 kbps
Presentation Graphics Danish 0.000 kbps
Presentation Graphics Dutch 0.000 kbps
Presentation Graphics Finnish 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics German 0.000 kbps
Presentation Graphics German 0.000 kbps
Presentation Graphics German 0.000 kbps
Presentation Graphics Greek 0.000 kbps
Presentation Graphics Italian 0.000 kbps
Presentation Graphics Italian 0.000 kbps
Presentation Graphics Italian 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Korean 0.000 kbps
Presentation Graphics Norwegian 0.000 kbps
Presentation Graphics Portuguese 0.000 kbps
Presentation Graphics Spanish 0.000 kbps
Presentation Graphics Spanish 0.000 kbps
Presentation Graphics Spanish 0.000 kbps
Presentation Graphics Swedish 0.000 kbps

FILES:

Name Time In Length Size Total Bitrate
---- ------- ------ ---- -------------
00333.M2TS 0:00:00.000 1:59:02.552 0 0

[Capsbackup]

this happens when the bluray contains different videos in the same M2TS (1080 and 420)
[05/17/12] BD Rebuilder v0.40.09 (beta)
[22:56:40] Source: BDRA


You should try it on the original Blu-ray and not a pre-processed one with multiAVCHD. :cool:

[pichu69]

You should try it on the original Blu-ray and not a pre-processed one with multiAVCHD. :cool:

Bluray is the same, the former was prosecuted MultyAVCH changing the order of the videos to see if that solved the error

[05/18/12] BD Rebuilder v0.40.09 (beta)
[05:08:12] Source: JOSS.WHEDON.-.[SERENITY].2005.BLU-RAY.1080P.VC-1.DTS-HDMA.-GEORGE.C
- Input BD size: 39.14 GB
- Approximate total content: [04:00:58.976]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Quality: High-Speed Option (BD-25), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[05:08:12] PHASE ONE, Encoding
- [05:08:12] Processing: VID_00312 (1 of 52)
- [05:08:12] Extracting A/V streams [VID_00312]
- [05:08:22] Reencoding video [VID_00312]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 10,935 frames
- Bitrate: 2,526 Kbs
- [05:08:22] Reencoding: VID_00312, Pass 1 of 1
- [05:09:11] Video Encode complete
- [05:09:11] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:09:11] Multiplexing M2TS
- [05:09:16] Processing: VID_00313 (2 of 52)
- [05:09:16] Extracting A/V streams [VID_00313]
- [05:10:08] Reencoding video [VID_00313]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 8,170 frames
- Bitrate: 2,863 Kbs
- [05:10:08] Reencoding: VID_00313, Pass 1 of 1
- [05:10:43] Video Encode complete
- [05:10:43] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:10:43] Multiplexing M2TS
- [05:10:51] Processing: VID_00314 (3 of 52)
- [05:10:51] Extracting A/V streams [VID_00314]
- [05:12:48] Reencoding video [VID_00314]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 11,785 frames
- Bitrate: 2,858 Kbs
- [05:12:48] Reencoding: VID_00314, Pass 1 of 1
- [05:13:46] Video Encode complete
- [05:13:46] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:13:46] Multiplexing M2TS
- [05:13:53] Processing: VID_00315 (4 of 52)
- [05:13:53] Extracting A/V streams [VID_00315]
- [05:16:04] Reencoding video [VID_00315]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 17,425 frames
- Bitrate: 2,846 Kbs
- [05:16:04] Reencoding: VID_00315, Pass 1 of 1
- [05:17:27] Video Encode complete
- [05:17:27] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:17:27] Multiplexing M2TS
- [05:17:44] Processing: VID_00316 (5 of 52)
- [05:17:44] Extracting A/V streams [VID_00316]
- [05:18:23] Reencoding video [VID_00316]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 7,040 frames
- Bitrate: 2,551 Kbs
- [05:18:23] Reencoding: VID_00316, Pass 1 of 1
- [05:19:01] Video Encode complete
- [05:19:01] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:19:01] Multiplexing M2TS
- [05:19:08] Processing: VID_00317 (6 of 52)
- [05:19:08] Extracting A/V streams [VID_00317]
- [05:19:58] Reencoding video [VID_00317]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 12,125 frames
- Bitrate: 2,307 Kbs
- [05:19:58] Reencoding: VID_00317, Pass 1 of 1
- [05:20:51] Video Encode complete
- [05:20:51] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:20:51] Multiplexing M2TS
- [05:21:05] Processing: VID_00321 (7 of 52)
- [05:21:05] Extracting A/V streams [VID_00321]
- [05:23:46] Reencoding video [VID_00321]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 14,410 frames
- Bitrate: 4,784 Kbs
- [05:23:46] Reencoding: VID_00321, Pass 1 of 1
- [05:25:01] Video Encode complete
- [05:25:01] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:25:01] Multiplexing M2TS
- [05:25:26] Processing: VID_00323 (8 of 52)
- [05:25:27] Extracting A/V streams [VID_00323]
- [05:26:22] Reencoding video [VID_00323]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 7,400 frames
- Bitrate: 2,573 Kbs
- [05:26:22] Reencoding: VID_00323, Pass 1 of 1
- [05:27:07] Video Encode complete
- [05:27:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:27:07] Multiplexing M2TS
- [05:27:16] Processing: VID_00324 (9 of 52)
- [05:27:16] Extracting A/V streams [VID_00324]
- [05:37:07] Reencoding video [VID_00324]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 35,815 frames
- Bitrate: 4,704 Kbs
- [05:37:07] Reencoding: VID_00324, Pass 1 of 1
- [05:40:20] Video Encode complete
- [05:40:20] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:40:20] Multiplexing M2TS
- [05:41:10] Processing: VID_00325 (10 of 52)
- [05:41:10] Extracting A/V streams [VID_00325]
- [05:42:19] Reencoding video [VID_00325]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,615 frames
- Bitrate: 2,605 Kbs
- [05:42:20] Reencoding: VID_00325, Pass 1 of 1
- [05:42:54] Video Encode complete
- [05:42:54] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [05:42:54] Multiplexing M2TS
- [05:43:03] Processing: VID_00328 (11 of 52)
- [05:43:03] Extracting A/V streams [VID_00328]
- [05:43:10] Reencoding video [VID_00328]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 7,200 frames
- Bitrate: 3,010 Kbs
- [05:43:10] Reencoding: VID_00328, Pass 1 of 1
- [05:45:01] Video Encode complete
- [05:45:01] Processing audio tracks
- [05:45:01] Multiplexing M2TS
- [05:45:09] Processing: VID_00333 (12 of 52)
- [05:45:09] Extracting A/V streams [VID_00333]
- [06:09:19] Reencoding video [VID_00333]
- [06:09:19] Reencoding secondary video [TRK_02]
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Wrong version found
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[06:09:46] - Failed video encode, aborted


Disc Title: Joss.Whedon.-.[Serenity].2005.Blu-Ray.1080P.VC-1.DTS-HDMA.-george.c
Disc Size: 42,031,350,297 bytes
Protection: AACS
BD-Java: Yes
BDInfo: 0.5.1

VIDEO:

Codec Bitrate Description
----- ------- -----------
VC-1 Video 0 kbps 1080p / 23.976 fps / 16:9 / Advanced Profile 3
VC-1 Video 0 kbps 480p / 23.976 fps / 4:3 / Advanced Profile 2
VC-1 Video 0 kbps 480p / 23.976 fps / 16:9 / Advanced Profile 2

AUDIO:

Codec Language Bitrate Description
----- -------- ------- -----------
DTS-HD Master Audio English 0 kbps 5.1 / 48 kHz / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
DTS Audio French 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio French 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio German 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Italian 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Japanese 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Spanish 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
DTS Audio Spanish 768 kbps 5.1 / 48 kHz / 768 kbps / 24-bit
Dolby Digital Audio Chinese 384 kbps 5.1 / 48 kHz / 384 kbps
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / Dolby Surround
Dolby Digital Audio English 192 kbps 2.0 / 48 kHz / 192 kbps / Dolby Surround
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit
DTS Express English 192 kbps 2.0 / 48 kHz / 192 kbps / 24-bit

SUBTITLES:

Codec Language Bitrate Description
----- -------- ------- -----------
Presentation Graphics English 0.000 kbps
Presentation Graphics English 0.000 kbps
Presentation Graphics English 0.000 kbps
Presentation Graphics English 0.000 kbps
Presentation Graphics Chinese 0.000 kbps
Presentation Graphics Chinese 0.000 kbps
Presentation Graphics Chinese 0.000 kbps
Presentation Graphics Danish 0.000 kbps
Presentation Graphics Dutch 0.000 kbps
Presentation Graphics Finnish 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics French 0.000 kbps
Presentation Graphics German 0.000 kbps
Presentation Graphics German 0.000 kbps
Presentation Graphics German 0.000 kbps
Presentation Graphics Greek 0.000 kbps
Presentation Graphics Italian 0.000 kbps
Presentation Graphics Italian 0.000 kbps
Presentation Graphics Italian 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Japanese 0.000 kbps
Presentation Graphics Korean 0.000 kbps
Presentation Graphics Norwegian 0.000 kbps
Presentation Graphics Portuguese 0.000 kbps
Presentation Graphics Spanish 0.000 kbps
Presentation Graphics Spanish 0.000 kbps
Presentation Graphics Spanish 0.000 kbps
Presentation Graphics Swedish 0.000 kbps

FILES:

Name Time In Length Size Total Bitrate
---- ------- ------ ---- -------------
00333.M2TS 0:00:00.000 1:59:02.552 0 0

[Capsbackup]

Bluray is the same, the former was prosecuted MultyAVCH changing the order of the videos to see if that solved the error

[05/18/12] BD Rebuilder v0.40.09 (beta)
[05:08:12] Source: JOSS.WHEDON.-.[SERENITY].2005.BLU-RAY.1080P.VC-1.DTS-HDMA.-GEORGE.C


Original purchased Blu-ray! :rolleyes:

Sorry, cannot help. :(

[jdobbs]

@Cela

The only time you have to worry about violating the AVCHD standard is when you are backing up to DVD+-R. Usually that means you are doing a movie-only backup.

[Capsbackup]

@Cela

The only time you have to worry about violating the AVCHD standard is when you are backing up to DVD+-R. Usually that means you are doing a movie-only backup.

I quite often do full backups to BD5/9 for playback on my Sony S360 standalone. I always let BD-RB reencode the audio to 640 DD AC3, since this always works and plays back correctly.
I know some users are making backups for PC based playback, and thus the AVCHD standard may not be as important to them. Seems software players will play back almost anything. :p
What is important is for the user to consider the ultimate playback device and the potential compatibility of the backup for future use. Then the decision for the type of audio to keep will have more relevance! ;)

[jdobbs]

I quite often do full backups to BD5/9 for playback on my Sony S360 standalone. I always let BD-RB reencode the audio to 640 DD AC3, since this always works and plays back correctly.
I know some users are making backups for PC based playback, and thus the AVCHD standard may not be as important to them. Seems software players will play back almost anything. :p
What is important is for the user to consider the ultimate playback device and the potential compatibility of the backup for future use. Then the decision for the type of audio to keep will have more relevance! ;) You're absolutely right. A full backup to DVD+-R is a little different. It depends on the player. If the source uses no BD-J, then (for the most part) the output can become AVCHD compliant. In that case it's almost always better to convert to AC3. Frankly I believe you should always do it anyway, since it is more efficient and the difference can't be detected anyway (at 640Kbs).

[dfsooner]

- Bitrate: -24,691 Kbs
????

[05/20/12] BD Rebuilder v0.40.09 (beta)
[00:16:07] Source: SOPRANOS_S1D5
- Input BD size: 20.63 GB
- Approximate total content: [02:32:13.632]
- Target BD size: 7.84 GB
- Windows Version: 6.1 [7601]
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[00:16:07] PHASE ONE, Encoding
- [00:16:07] Processing: VID_00000 (1 of 12)
- [00:16:07] Extracting A/V streams [VID_00000]
- [00:23:11] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 87,011 frames
- Bitrate: 11,701 Kbs
- [00:23:12] Reencoding: VID_00000, Pass 1 of 2
- [01:02:53] Reencoding: VID_00000, Pass 2 of 2
- [02:13:53] Video Encode complete
- [02:13:54] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [02:13:54] Multiplexing M2TS
- [02:15:46] Processing: VID_00001 (2 of 12)
- [02:15:46] Extracting A/V streams [VID_00001]
- [02:15:56] Reencoding video [VID_00001]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 6,361 frames
- Bitrate: 2,195 Kbs
- [02:15:56] Reencoding: VID_00001, Pass 1 of 2
- [02:16:20] Reencoding: VID_00001, Pass 2 of 2
- [02:17:04] Video Encode complete
- [02:17:04] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [02:17:04] Multiplexing M2TS
- [02:17:09] Processing: VID_00002 (3 of 12)
- [02:17:09] Extracting A/V streams [VID_00002]
- [02:17:20] Reencoding video [VID_00002]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 7,547 frames
- Bitrate: 2,481 Kbs
- [02:17:20] Reencoding: VID_00002, Pass 1 of 2
- [02:17:49] Reencoding: VID_00002, Pass 2 of 2
- [02:18:42] Video Encode complete
- [02:18:42] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [02:18:42] Multiplexing M2TS
- [02:18:48] Processing: VID_00003 (4 of 12)
- [02:18:48] Extracting A/V streams [VID_00003]
- [02:18:52] Reencoding video [VID_00003]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 29.970fps, 270 frames
- Bitrate: 3,722 Kbs
- [02:18:52] Reencoding: VID_00003, Pass 1 of 2
- [02:18:55] Reencoding: VID_00003, Pass 2 of 2
- [02:18:58] Video Encode complete
- [02:18:58] Processing audio tracks
- [02:18:58] Multiplexing M2TS
- [02:19:01] Processing: VID_00004 (5 of 12)
- [02:19:01] Extracting A/V streams [VID_00004]
- [02:19:06] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 313 frames
- Bitrate: 10,253 Kbs
- [02:19:06] Reencoding: VID_00004, Pass 1 of 2
- [02:19:14] Reencoding: VID_00004, Pass 2 of 2
- [02:19:30] Video Encode complete
- [02:19:30] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [02:19:30] Multiplexing M2TS
- [02:19:34] Processing: VID_00007 (6 of 12)
- [02:19:34] Extracting A/V streams [VID_00007]
- [02:19:42] Reencoding video [VID_00007]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,032 frames
- Bitrate: 8,750 Kbs
- [02:19:43] Reencoding: VID_00007, Pass 1 of 2
- [02:20:04] Reencoding: VID_00007, Pass 2 of 2
- [02:20:37] Video Encode complete
- [02:20:37] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (spa): Keeping original audio
- Track 4354 (fra): Keeping original audio
- Track 4355 (deu): Keeping original audio
- Track 4356 (spa): Keeping original audio
- Track 4357 (eng): Keeping original audio
- [02:20:37] Multiplexing M2TS
- [02:20:45] Processing: VID_00008 (7 of 12)
- [02:20:45] Extracting A/V streams [VID_00008]
- [02:20:52] Reencoding video [VID_00008]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 711 frames
- Bitrate: 9,326 Kbs
- [02:20:52] Reencoding: VID_00008, Pass 1 of 2
- [02:21:06] Reencoding: VID_00008, Pass 2 of 2
- [02:21:30] Video Encode complete
- [02:21:30] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- [02:21:30] Multiplexing M2TS
- [02:21:34] Processing: VID_00009 (8 of 12)
- [02:21:34] Extracting A/V streams [VID_00009]
- [02:21:42] Reencoding video [VID_00009]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 29.970fps, 210 frames
- Bitrate: -24,691 Kbs
- [02:21:42] Reencoding: VID_00009, Pass 1 of 2
- [02:21:49] Reencoding: VID_00009, Pass 2 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[02:21:52] - Failed video encode, aborted
==========================
[02:21:52] END - BATCH SEQUENCE
==========================

[AmigaFuture]

this happens when the bluray contains different videos in the same M2TS (1080 and 420)

The program multiAVCHD (4.1) is good for combining or making playable disks from your backups but there are bugs when processing Blu-ray directories (still). I've carefully processed several of my originals. I like to remove those warnings and more, not just trailers, (from any part of the structure) like DVDReMakePro and PGCEdit do for DVDs but until one is made (Any suggestions anyone?), BD-RB doesn't "play well" with multiAVCHD. Which is why Processed (or produced) Bugs (hehe) aren't supported here. Though, BD-RB's EDIT mode does function ~very well~ where it's at.

[Audiophile1178]

dfsooner, I got the same bitrate error which I've never seen before. This was on Men In Black II disc.

Bitrate: -149,458 Kbs

[05/18/12] BD Rebuilder v0.40.09 (beta)
[01:41:32] Source: MEN_IN_BLACK_II
- Input BD size: 26.65 GB
- Approximate total content: [03:42:42.424]
- Target BD size: 23.63 GB
- Windows Version: 6.1 [7601]
- SHUTDOWN at completion enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[01:41:33] PHASE ONE, Encoding
- [01:41:33] Processing: VID_00000 (1 of 32)
- [01:41:33] Extracting A/V streams [VID_00000]
- [01:41:39] Reencoding video [VID_00000]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 3,990 frames
- Bitrate: 5,183 Kbs
- [01:41:39] Reencoding: VID_00000, Pass 1 of 2
- [01:42:00] Reencoding: VID_00000, Pass 2 of 2
- [01:43:23] Video Encode complete
- [01:43:23] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [01:43:23] Multiplexing M2TS
- [01:43:29] Processing: VID_00001 (2 of 32)
- [01:43:29] Extracting A/V streams [VID_00001]
- [01:48:47] Reencoding video [VID_00001]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 126,792 frames
- Bitrate: 23,911 Kbs
- [01:48:47] Reencoding: VID_00001, Pass 1 of 2
- [02:57:23] Reencoding: VID_00001, Pass 2 of 2
- [06:51:46] Video Encode complete
- [06:51:46] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- [06:51:46] Multiplexing M2TS
- [07:01:53] Processing: VID_00002 (3 of 32)
- [07:01:53] Extracting A/V streams [VID_00002]
- [07:02:12] Reencoding video [VID_00002]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 9,265 frames
- Bitrate: 5,193 Kbs
- [07:02:12] Reencoding: VID_00002, Pass 1 of 2
- [07:03:00] Reencoding: VID_00002, Pass 2 of 2
- [07:06:23] Video Encode complete
- [07:06:23] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [07:06:24] Multiplexing M2TS
- [07:06:30] Processing: VID_00017 (4 of 32)
- [07:06:30] Extracting A/V streams [VID_00017]
- [07:06:45] Reencoding video [VID_00017]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 16,943 frames
- Bitrate: 5,152 Kbs
- [07:06:45] Reencoding: VID_00017, Pass 1 of 2
- [07:08:13] Reencoding: VID_00017, Pass 2 of 2
- [07:14:12] Video Encode complete
- [07:14:12] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [07:14:12] Multiplexing M2TS
- [07:14:21] Processing: VID_00018 (5 of 32)
- [07:14:21] Extracting A/V streams [VID_00018]
- [07:14:38] Reencoding video [VID_00018]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 18,018 frames
- Bitrate: 5,103 Kbs
- [07:14:38] Reencoding: VID_00018, Pass 1 of 2
- [07:16:04] Reencoding: VID_00018, Pass 2 of 2
- [07:21:15] Video Encode complete
- [07:21:15] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [07:21:15] Multiplexing M2TS
- [07:21:24] Processing: VID_00019 (6 of 32)
- [07:21:24] Extracting A/V streams [VID_00019]
- [07:21:40] Reencoding video [VID_00019]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 19,381 frames
- Bitrate: 5,183 Kbs
- [07:21:40] Reencoding: VID_00019, Pass 1 of 2
- [07:23:22] Reencoding: VID_00019, Pass 2 of 2
- [07:29:57] Video Encode complete
- [07:29:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [07:29:57] Multiplexing M2TS
- [07:30:08] Processing: VID_00020 (7 of 32)
- [07:30:08] Extracting A/V streams [VID_00020]
- [07:30:21] Reencoding video [VID_00020]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 14,508 frames
- Bitrate: 5,147 Kbs
- [07:30:21] Reencoding: VID_00020, Pass 1 of 2
- [07:31:35] Reencoding: VID_00020, Pass 2 of 2
- [07:36:18] Video Encode complete
- [07:36:18] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [07:36:18] Multiplexing M2TS
- [07:36:29] Processing: VID_00021 (8 of 32)
- [07:36:29] Extracting A/V streams [VID_00021]
- [07:36:47] Reencoding video [VID_00021]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 23,153 frames
- Bitrate: 5,188 Kbs
- [07:36:47] Reencoding: VID_00021, Pass 1 of 2
- [07:38:48] Reencoding: VID_00021, Pass 2 of 2
- [07:46:54] Video Encode complete
- [07:46:54] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [07:46:54] Multiplexing M2TS
.....
..... I had to shorten some of it because there was too much text...
.....
- [07:59:28] Processing: VID_00026 (13 of 32)
- [07:59:28] Extracting A/V streams [VID_00026]
- [07:59:35] Reencoding video [VID_00026]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,540 frames
- Bitrate: 5,203 Kbs
- [07:59:35] Reencoding: VID_00026, Pass 1 of 2
- [08:00:04] Reencoding: VID_00026, Pass 2 of 2
- [08:01:57] Video Encode complete
- [08:01:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:01:57] Multiplexing M2TS
- [08:02:03] Processing: VID_00027 (14 of 32)
- [08:02:03] Extracting A/V streams [VID_00027]
- [08:02:12] Reencoding video [VID_00027]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 8,001 frames
- Bitrate: 5,230 Kbs
- [08:02:12] Reencoding: VID_00027, Pass 1 of 2
- [08:02:57] Reencoding: VID_00027, Pass 2 of 2
- [08:05:48] Video Encode complete
- [08:05:48] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:05:48] Multiplexing M2TS
- [08:05:55] Processing: VID_00028 (15 of 32)
- [08:05:55] Extracting A/V streams [VID_00028]
- [08:06:01] Reencoding video [VID_00028]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 4,512 frames
- Bitrate: 5,186 Kbs
- [08:06:01] Reencoding: VID_00028, Pass 1 of 2
- [08:06:26] Reencoding: VID_00028, Pass 2 of 2
- [08:08:03] Video Encode complete
- [08:08:03] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:08:03] Multiplexing M2TS
- [08:08:09] Processing: VID_00029 (16 of 32)
- [08:08:09] Extracting A/V streams [VID_00029]
- [08:08:16] Reencoding video [VID_00029]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 6,051 frames
- Bitrate: 5,198 Kbs
- [08:08:16] Reencoding: VID_00029, Pass 1 of 2
- [08:08:48] Reencoding: VID_00029, Pass 2 of 2
- [08:10:57] Video Encode complete
- [08:10:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:10:57] Multiplexing M2TS
- [08:11:03] Processing: VID_00030 (17 of 32)
- [08:11:03] Extracting A/V streams [VID_00030]
- [08:11:10] Reencoding video [VID_00030]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 4,682 frames
- Bitrate: 5,195 Kbs
- [08:11:10] Reencoding: VID_00030, Pass 1 of 2
- [08:11:34] Reencoding: VID_00030, Pass 2 of 2
- [08:13:34] Video Encode complete
- [08:13:34] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:13:34] Multiplexing M2TS
- [08:13:39] Processing: VID_00032 (18 of 32)
- [08:13:39] Extracting A/V streams [VID_00032]
- [08:13:45] Reencoding video [VID_00032]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 3,342 frames
- Bitrate: 4,352 Kbs
- [08:13:45] Reencoding: VID_00032, Pass 1 of 2
- [08:14:01] Reencoding: VID_00032, Pass 2 of 2
- [08:15:07] Video Encode complete
- [08:15:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:15:07] Multiplexing M2TS
- [08:15:11] Processing: VID_00033 (19 of 32)
- [08:15:11] Extracting A/V streams [VID_00033]
- [08:15:16] Reencoding video [VID_00033]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 1,709 frames
- Bitrate: 4,335 Kbs
- [08:15:16] Reencoding: VID_00033, Pass 1 of 2
- [08:15:24] Reencoding: VID_00033, Pass 2 of 2
- [08:16:09] Video Encode complete
- [08:16:09] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:16:09] Multiplexing M2TS
- [08:16:13] Processing: VID_00034 (20 of 32)
- [08:16:13] Extracting A/V streams [VID_00034]
- [08:16:20] Reencoding video [VID_00034]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,815 frames
- Bitrate: 4,388 Kbs
- [08:16:20] Reencoding: VID_00034, Pass 1 of 2
- [08:16:48] Reencoding: VID_00034, Pass 2 of 2
- [08:19:00] Video Encode complete
- [08:19:01] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:19:01] Multiplexing M2TS
- [08:19:06] Processing: VID_00035 (21 of 32)
- [08:19:06] Extracting A/V streams [VID_00035]
- [08:19:10] Reencoding video [VID_00035]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 1,174 frames
- Bitrate: 4,382 Kbs
- [08:19:10] Reencoding: VID_00035, Pass 1 of 2
- [08:19:16] Reencoding: VID_00035, Pass 2 of 2
- [08:19:37] Video Encode complete
- [08:19:37] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:19:37] Multiplexing M2TS
- [08:19:41] Processing: VID_00036 (22 of 32)
- [08:19:41] Extracting A/V streams [VID_00036]
- [08:19:46] Reencoding video [VID_00036]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 1,809 frames
- Bitrate: 4,338 Kbs
- [08:19:46] Reencoding: VID_00036, Pass 1 of 2
- [08:19:55] Reencoding: VID_00036, Pass 2 of 2
- [08:20:28] Video Encode complete
- [08:20:28] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:20:28] Multiplexing M2TS
- [08:20:32] Processing: VID_00037 (23 of 32)
- [08:20:32] Extracting A/V streams [VID_00037]
- [08:20:41] Reencoding video [VID_00037]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 8,370 frames
- Bitrate: 5,110 Kbs
- [08:20:41] Reencoding: VID_00037, Pass 1 of 2
- [08:21:23] Reencoding: VID_00037, Pass 2 of 2
- [08:23:56] Video Encode complete
- [08:23:56] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:23:56] Multiplexing M2TS
- [08:24:03] Processing: VID_00038 (24 of 32)
- [08:24:03] Extracting A/V streams [VID_00038]
- [08:24:07] Reencoding video [VID_00038]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 1,787 frames
- Bitrate: 4,796 Kbs
- [08:24:07] Reencoding: VID_00038, Pass 1 of 2
- [08:24:13] Reencoding: VID_00038, Pass 2 of 2
- [08:24:25] Video Encode complete
- [08:24:25] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:24:25] Multiplexing M2TS
- [08:24:29] Processing: VID_00044 (25 of 32)
- [08:24:29] Extracting A/V streams [VID_00044]
- [08:24:36] Reencoding video [VID_00044]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,815 frames
- Bitrate: 4,388 Kbs
- [08:24:36] Reencoding: VID_00044, Pass 1 of 2
- [08:25:05] Reencoding: VID_00044, Pass 2 of 2
- [08:27:15] Video Encode complete
- [08:27:15] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:27:15] Multiplexing M2TS
- [08:27:21] Processing: VID_00045 (26 of 32)
- [08:27:21] Extracting A/V streams [VID_00045]
- [08:27:28] Reencoding video [VID_00045]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,815 frames
- Bitrate: 4,396 Kbs
- [08:27:28] Reencoding: VID_00045, Pass 1 of 2
- [08:27:57] Reencoding: VID_00045, Pass 2 of 2
- [08:30:02] Video Encode complete
- [08:30:02] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:30:02] Multiplexing M2TS
- [08:30:08] Processing: VID_00046 (27 of 32)
- [08:30:08] Extracting A/V streams [VID_00046]
- [08:30:16] Reencoding video [VID_00046]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,815 frames
- Bitrate: 4,396 Kbs
- [08:30:16] Reencoding: VID_00046, Pass 1 of 2
- [08:30:45] Reencoding: VID_00046, Pass 2 of 2
- [08:32:45] Video Encode complete
- [08:32:45] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:32:45] Multiplexing M2TS
- [08:32:50] Processing: VID_00047 (28 of 32)
- [08:32:50] Extracting A/V streams [VID_00047]
- [08:32:57] Reencoding video [VID_00047]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 5,815 frames
- Bitrate: 4,277 Kbs
- [08:32:57] Reencoding: VID_00047, Pass 1 of 2
- [08:33:25] Reencoding: VID_00047, Pass 2 of 2
- [08:35:39] Video Encode complete
- [08:35:39] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:35:39] Multiplexing M2TS
- [08:35:45] Processing: VID_00098 (29 of 32)
- [08:35:45] Extracting A/V streams [VID_00098]
- [08:35:49] Reencoding video [VID_00098]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 23.976fps, 72 frames
- Bitrate: 625 Kbs
- [08:35:49] Reencoding: VID_00098, Pass 1 of 2
- [08:35:50] Reencoding: VID_00098, Pass 2 of 2
- [08:35:51] Video Encode complete
- [08:35:51] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:35:51] Multiplexing M2TS
- [08:35:54] Processing: VID_00102 (30 of 32)
- [08:35:55] Extracting A/V streams [VID_00102]
- [08:36:03] Reencoding video [VID_00102]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 6,887 frames
- Bitrate: 7,389 Kbs
- [08:36:03] Reencoding: VID_00102, Pass 1 of 2
- [08:38:24] Reencoding: VID_00102, Pass 2 of 2
- [08:42:27] Video Encode complete
- [08:42:27] Processing audio tracks
- [08:42:27] Multiplexing M2TS
- [08:42:35] Processing: VID_00116 (31 of 32)
- [08:42:35] Extracting A/V streams [VID_00116]
- [08:42:44] Reencoding video [VID_00116]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 23.976fps, 1 frames
- Bitrate: -149,458 Kbs
- [08:42:44] Reencoding: VID_00116, Pass 1 of 2
- [08:43:27] Reencoding: VID_00116, Pass 2 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.11.96.14, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[08:43:27] - Failed video encode, aborted

[jdobbs]

I'll pick up one of those discs and see if I can repeat that. Not sure how that could happen... but it obviously can.

[Cela]

... I always let BD-RB reencode the audio to 640 DD AC3...Please tell me how you tell BDRB to convert LPCM 2.0 to AC3 2.0 with 640KBs. I always get 192 KBs but would like to choose 640KBs or 448KBs instead. Do not know how to setup the KBs choice for LPCM input.

For output I use BD9/DVD9 and reduce capacity to 7700MiB for longer lasting burn results. I could use some of the free space for 640KBs recodes of the LPCM audio stream without reducing the excellent video recode quality.

[Cela]

When I use the standard procedure, which works well for practical all of my non-java BDs, with my first and so far only java authorized BD I get a result where the screen remains black instead of showing the BD menu or starting to play the main video.

Nero Kwik (I de-installed PowerDVD a few days ago) plays the original BD back fine but not the backup (sentence borrowed from #15104).

Though I can use the two m2ts from BDRB of the 2 parts of the main movie to let multiAVCHD build a backup without the original menus.

What do I have to observe in order to follow best practice for full backups of java authorized BDs?

[RobertM]

(sentence borrowed from #15104)

What??

[jdobbs]

Please tell me how you tell BDRB to convert LPCM 2.0 to AC3 2.0 with 640KBs. I always get 192 KBs but would like to choose 640KBs or 448KBs instead. Do not know how to setup the KBs choice for LPCM input.

For output I use BD9/DVD9 and reduce capacity to 7700MiB for longer lasting burn results. I could use some of the free space for 640KBs recodes of the LPCM audio stream without reducing the excellent video recode quality. You don't. LPCM 2.0 only has two channels. 640Kbs AC3 is meant for 5 channels. Two channel audio is indistinguishable from the source encoded at 192Kbs.

[jdobbs]

When I use the standard procedure, which works well for practical all of my non-java BDs, with my first and so far only java authorized BD I get a result where the screen remains black instead of showing the BD menu or starting to play the main video.

Nero Kwik (I de-installed PowerDVD a few days ago) plays the original BD back fine but not the backup (sentence borrowed from #15104).

Though I can use the two m2ts from BDRB of the 2 parts of the main movie to let multiAVCHD build a backup without the original menus.

What do I have to observe in order to follow best practice for full backups of java authorized BDs? Backup to BD-25. Your player (software or standalone) probably doesn't recognize the BD-J when it is output to a DVD+-R. That's because AVCHD (the standard for HD on DVD+-R) doesn't support BD-J -- it just happens that some players will treat DVD+-R as BD (BD-5/9)... and it works on those.

[Cela]

What??Borrowed sentence:
'PowerDVD 11 plays all the originals back fine but not the backups'

It precisely describes my issue with BDRB rebuild java authored BD if I substitute the words ''PowerDVD 11' (which I recently uninstalled) by my the name of my current software player 'Nero Kwik' which I now use to pre-test BDRB and multiAVCHD output, though I am not talking about PIP but about java authored BD.

From what I see, the player loads a video of the correct time-length of the menu which it should play, but does not start to play it, thus the screen remains black and I cannot see and use the menu and as a consequence I cannot watch menu nor any titles, in short, it does not play the backup.

Have and need java BDs special settings in BDRB, which have to be applied in order to get a visible result?
Can somebody give me some hints what I should observe to avoid that replay issue and to get a working result.?

[jdobbs]

I answered you. I guess that's not the answer you wanted...

[Capsbackup]

Have and need java BDs special settings in BDRB, which have to be applied in order to get a visible result?
Can somebody give me some hints what I should observe to avoid that replay issue and to get a working result.?

Original Blu-rays that have Java menus can be made as movie-only, no menus, and there should be no playback problems, be it software players or standalone players that support the AVCHD standard. ;)

[Cela]

Edit:
Backup to BD-25. Your player (software or standalone) probably doesn't recognize the BD-J when it is output to a DVD+-R. That's because AVCHD (the standard for HD on DVD+-R) doesn't support BD-J -- it just happens that some players will treat DVD+-R as BD (BD-5/9)... and it works on those.
Thank you for your answers! :)

I believe that our postings crossed. You answered while I conceived my answer to RobertM about the sentence I borrowed from his post because it expressed with fewest words what I wanted to say.

I am happy with your answers because they clarify these matters: more than 192 KBs for LPCM 2.0 audio are a waste of disk space and BD-J is a no-go for DVD+-R, thus no extra java-BD setups and hidden options for BD-J.

Though, as a simple user, I would prefer to backup to DVD+R DL because BD-25 are rather expensive where I live.
And as a simple user, I have to admit that I nourished the obviously unrealistic hope for a rebuild of the java menu from java to a 'simple (~speedmenu like)' menu using the menu videos and maintaining the pop-up options to select titles and named chapters.

Is the PS3 among those players that will treat DVD+-R as BD (BD-5/9)... ? Is it worth to burn BDRB's BD-J backup to DVD+DL for PS3 or will I burn a coaster?

Is the 'GoBD' step still needed before burning to DVD+RL for playing on PS3?

Edit:
BD-J on DVD+-R: Verified today, my PS3 V3.40 does NOT support it, neither does my Philips BD Player BDP3100.
Nero10 Kwik plays it perfectly including all menus, though.

BD-25 version plays perfectly on all above mentioned hw and sw players.

'goBD': is needed for non BD-J backups on DVD+-R to play on my PS3.
Does not help to play BD-J backups on DVD+-R on my PS3 or BDP3100.
Does not prevent BD-25 version to play well on my PS3.

What is the official advice concerning 'goBD' before burning to disc?

[sonate]

Backup to BD-25. Your player (software or standalone) probably doesn't recognize the BD-J when it is output to a DVD+-R. That's because AVCHD (the standard for HD on DVD+-R) doesn't support BD-J -- it just happens that some players will treat DVD+-R as BD (BD-5/9)... and it works on those.

The Sharp BD-HP70U is one of those which so far has been able to play everything.

[JoeH]

I've tried to convert a few Blu-ray folders with subtitles created by TSMuxer to DVD with the latest version of BD Rebuilder. They have all failed to integrate the subtitles with the same error.

This worked with previous versions.

Here is an example log:

==========================
[19:42:09] BD Rebuilder v0.40.09 (beta)
[19:42:09] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[19:42:09] PROCESSING BATCH FILE [5]
----------------------
[05/22/12] BD Rebuilder v0.40.09 (beta)
[19:42:09] Source: BLU-RAY
- Input BD size: 4.53 GB
- Approximate total content: [01:38:20.769]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: DVD-5, 720x480/576, AC3 Audio
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[19:42:09] PHASE ONE, Encoding
- [19:42:09] Processing: VID_00000 (1 of 1)
- [19:42:09] Extracting A/V streams [VID_00000]
- [19:44:06] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1280x720
- Rate/Length: 23.976fps, 141,477 frames
- Bitrate: 5,671 Kbs
- [19:44:06] Reencoding: VID_00000
- [20:21:11] Video Encode complete
- [20:21:11] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
[20:25:13]PHASE ONE complete
[20:25:13]PHASE TWO - Rebuild Started
- [20:25:13] Building ALTERNATE OUTPUT Structure
- [20:25:13] Converting 1 subtitles to DVD format.
- [20:26:32] Starting MPLEX.
- [20:28:42] Multiplexing 1 subtitles into stream.
- WARNING: Failed to integrate Subtitle_01
- [20:30:10] Building DVD File Structure.
[20:32:39] - Encode and Rebuild complete
- WORKFILES folder removed.
[20:32:40] JOB: BLU-RAY finished.
==========================
[20:32:40] END - BATCH SEQUENCE
==========================

[jdobbs]

@dfsooner

I tried to repeat the error you posted with "Sopranos, Season 1, Disc 5", but couldn't. Here's what you got:- [02:21:34] Processing: VID_00009 (8 of 12)
- [02:21:34] Extracting A/V streams [VID_00009]
- [02:21:42] Reencoding video [VID_00009]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 29.970fps, 210 frames
- Bitrate: -24,691 Kbs
- [02:21:42] Reencoding: VID_00009, Pass 1 of 2
- [02:21:49] Reencoding: VID_00009, Pass 2 of 2
- Encode failed. Aborting.
and here's what I got: - [12:30:26] Processing: VID_00009 (8 of 12)
- [12:30:26] Extracting A/V streams [VID_00009]
- [12:30:32] Reencoding video [VID_00009]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 29.970fps, 210 frames
- Bitrate: 15,000 Kbs
- [12:30:32] Reencoding: VID_00009, Pass 1 of 2
- [12:30:41] Reencoding: VID_00009, Pass 2 of 2
- [12:30:51] Video Encode complete
- [12:30:51] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [12:30:58] Multiplexing M2TS

Can you post your settings (Config/INI contents)? Obviously something is different.

[dfsooner]

@dfsooner

I tried to repeat the error you posted with "Sopranos, Season 1, Disc 5", but couldn't. Here's what you got:
and here's what I got:

Can you post your settings (Config/INI contents)? Obviously something is different.

I reran it with different options and got it to work. I don't remember exactly what I changed, but I believe I changed it to use LAVF. I'll play around with it to see if I can reproduce the error. I'm not surprised that you couldn't reproduce it. I believe the same file is present in other disks in the series and I didn't have a problem with those.

In case you're wondering. I run an I7 2600k but it is not overclocked and I haven't observed any temperature issues on my system.

[dfsooner]

OK. I reproduced the problem. See below:

- [16:58:49] Processing: VID_00009 (8 of 12)
- [16:58:49] Extracting A/V streams [VID_00009]
- [16:58:56] Reencoding video [VID_00009]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 29.970fps, 210 frames
- Bitrate: -24,691 Kbs
- [16:58:56] Reencoding: VID_00009, Pass 1 of 2
- [16:59:03] Reencoding: VID_00009, Pass 2 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.09 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok

BD_REBUILDER.INI:

[Options]
VERSION=0.38.0.4
MODE=0
ENCODE_QUALITY=2
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=8032
PRIORITY_CLASS=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;fra;ger;spa;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=1
USE_LAVF=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
AUTO_BLANK=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
QUICK_EXTRAS=0
UNMASK_CHAPTER=1
COMPLETION_BEEP=1
DGDECNV=0
[Paths]
WORKING_PATH=E:\BD_REBUILDER WORKFILES\
SOURCE_PATH=X:\

[jdobbs]

Ok, I'm a little confused. The INI you provided shows a version of "0.38.0.4", but your log shows "v0.40.09" -- if that were the case and you'd used it, BD Rebuilder would have updated the version number. Also the name of the file would be "BDREBUILDER.INI" rather than "BD_REBUILDER.INI".

I'll try it with those settings, though.

[Revgen]

Everytime I try to use BD Rebuilder, I get this error.

run-time error '75':

Path/File access error

It doesn't seem to matter where I put the working directory or which drive I put it on. Same error every single time. My OS is WinXP SP3.

[RobertM]

Everytime I try to use BD Rebuilder, I get this error.

run-time error '75':

Path/File access error

Does this happen as soon as you launch BD-Rebuilder? If so, then try renaming your BDRebuilder.ini file to something else and see if that helps it get past the initialization hurdle.

[jdobbs]

Does this happen as soon as you launch BD-Rebuilder? If so, then try renaming your BDRebuilder.ini file to something else and see if that helps it get past the initialization hurdle. Sounds like the INI is pointing to a non-existent path. That might happen when, for example, a USB (or other mountable drive) is removed that once was the path for input or output.

Try deleting BDREBUILDER.INI (from the installation folder) before starting BD-RB. It will re-create it with default settings.

[Edit] Too late -- RobertM already answered... ;)

[dfsooner]

Ok, I'm a little confused. The INI you provided shows a version of "0.38.0.4", but your log shows "v0.40.09" -- if that were the case and you'd used it, BD Rebuilder would have updated the version number. Also the name of the file would be "BDREBUILDER.INI" rather than "BD_REBUILDER.INI".



I'll try it with those settings, though.




My apologies. I had copied from an old installation on another drive.

Here is the real BDREBUILDER.INI:

[Options]
VERSION=0.40.0.9
MODE=0
ENCODE_QUALITY=2
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=8032
PRIORITY_CLASS=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;fra;ger;spa;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=1
USE_LAVF=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
AUTO_BLANK=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
QUICK_EXTRAS=0
UNMASK_CHAPTER=1
COMPLETION_BEEP=1
DGDECNV=0
[Paths]
WORKING_PATH=E:\BD_REBUILDER WORKFILES\
SOURCE_PATH=X:\

[Revgen]

Does this happen as soon as you launch BD-Rebuilder? If so, then try renaming your BDRebuilder.ini file to something else and see if that helps it get past the initialization hurdle.

There is no BDRebuilder.ini file in my download archive. And none is created when I start the program. It just gives the error as soon as I double-click.

[RobertM]

There is no BDRebuilder.ini file in my download archive. And none is created when I start the program. It just gives the error as soon as I double-click.

Hmm, I don't understand. Previously you stated:

It doesn't seem to matter where I put the working directory or which drive I put it on

You don't assign a working folder until AFTER BD-Rebuilder runs for the first time. Now you are saying that the program never starts at all.

To be clear:

1. you unzip the archive file into a folder on your hardrive. It doesn't matter where you put it ("C:/temp/BDRebuilder" might be a good spot for trial purposes.
2. You have to unzip it so that it retains the directory structure of the zipped archive. I don't think that you can't just unzip the entire contents into the same folder, since some helper apps exist in the subfolder locations.
3. When it runs the first time it will create the BDRebuilder.ini file in the same folder as the BDRebuilder.exe file.
4. Anti virus programs may interfere with launching a new, unknown *.exe file. Do you have any full-time AV running .

Let us know if this needs to be clarified more.

[jdobbs]

There is no BDRebuilder.ini file in my download archive. And none is created when I start the program. It just gives the error as soon as I double-click.

Sounds like you've unzipped to a folder that needs additional privileges for writing...

[Revgen]

Sounds like you've unzipped to a folder that needs additional privileges for writing...

This is my home computer. I installed the OS, so it would be strange that I'd have limited privileges.

Anyhoo, I used CACLS on the entire folder. No luck.

My command line was

cacls "E:\BD_Rebuilder" /e /t /p users:f

Any other suggestions?

EDIT:

I turned off anti-virus and anti-spyware too. No luck there either.

[AmigaFuture]

A "working directory" could be a way of describing where the archive is being extracted. A friend of mine says it a lot. Not that it's a setting being set within the program AFTER extraction. Which Jdobbs is probably correct about.

Revgen: If you're using Windows 7, and you've saved the file to some other location than Desktop...try coping the file to the Desktop or re-downloading to Desktop. Windows 7/Vista treats privileges different than XP. Then extract it. Technical support can miss simple steps by being too technical. Hehe. A friend of mine helps Me remember that, often. I hope that's the case here. :)

[Revgen]

A "working directory" could be a way of describing where the archive is being extracted. A friend of mine says it a lot. Not that it's a setting being set within the program AFTER extraction. Which Jdobbs is probably correct about.

Revgen: If you're using Windows 7, and you've saved the file to some other location than Desktop...try coping the file to the Desktop or re-downloading to Desktop. Windows 7/Vista treats privileges different than XP. Then extract it. Technical support can miss simple steps by being too technical. Hehe. A friend of mine helps Me remember that, often. I hope that's the case here. :)

I'm using WinXP SP3. But thanks for the info on Win 7. I'll remember that when I upgrade.

[Revgen]

Hmm, I don't understand. Previously you stated:



You don't assign a working folder until AFTER BD-Rebuilder runs for the first time. Now you are saying that the program never starts at all.

To be clear:

1. you unzip the archive file into a folder on your hardrive. It doesn't matter where you put it ("C:/temp/BDRebuilder" might be a good spot for trial purposes.
2. You have to unzip it so that it retains the directory structure of the zipped archive. I don't think that you can't just unzip the entire contents into the same folder, since some helper apps exist in the subfolder locations.
3. When it runs the first time it will create the BDRebuilder.ini file in the same folder as the BDRebuilder.exe file.
4. Anti virus programs may interfere with launching a new, unknown *.exe file. Do you have any full-time AV running .

Let us know if this needs to be clarified more.

I unzipped the folder to various drives. The program doesn't work no matter where I unzip it to. All anti-virus programs are turned off and I ran CACLS on the folder just in case it's a write permissions issue as jdobbs suggested.

[AmigaFuture]

You're welcome. It has been a while since I've seen CACLS, so I used Google, and I then knew you were using XP. I may test your encounter with my XP partition this weekend as I have an XP SP3 install. At the moment, my recommendation is to re-download the file. Possible corrupt archive since you typed the INI is not there. What are you using to view/extract the Archive? I use WinRAR for everything; which is also great for dealing with permissions.

[AmigaFuture]

You may have unarchived the archive to different drives...but to make things easier at the moment, what happens when you extract the archive to the Desktop? I'm trying to remove Any possible Bad OS installs, and other things by asking. :)

[Revgen]

Extracted to Desktop using WinRAR. No luck. Same problem.

EDIT

I redownloaded using DownThemAll instead of Firefox's default downloader. Same problem.

[AmigaFuture]

Okay...Yup, I'm tired at the moment. Wow. The config file isn't in the archive. It's made After the first time it's run, correctly. You extract the archive with WinRAR to the Desktop. You'll get a directory called "BD_Rebuilder" from the archive BD-RBV04009.zip.
Within that directory, BD_Rebuilder double click the file BDRB. The INI should be made and you should see the program.

[AmigaFuture]

I wouldn't use a download manager at this point until you know things are functioning as they should. Just use Firefox as per normal.

[hifreak]

I have problems with low fps always on second pass not even 10 fps per second. My computer is new I7 2700K and I have 8GB of memeory, so I don´t believe it is my hardware who cause the problem. Here is my settings:

[Options]
VERSION=0.40.0.9
MODE=2
ENCODE_QUALITY=2
Movies shorter than 100 minutes, (almost) no grain) = "TWEAK_PASS_TWO=--filter -1,-1 --no-psy --aq-mode 0 --no-mbtree
Movies shorter than 100 minutes, grainy) = "TWEAK_PASS_TWO=--filter -3,-3 --aq-mode 0 --no-mbtree
Movies between 100 and 130 minutes, (almost) no grain) = "TWEAK_PASS_TWO=--filter -2,-2 --me umh --merange 32
Movies between 100 and 130 minutes, grainy) = "TWEAK_PASS_TWO=--filter -3,-3 --me umh --merange 32 --trellis 2
Movies longer than 130 minutes, (almost) no grain) = "TWEAK_PASS_TWO=--filter -3,-3 --me umh --subme 10 --merange 64 --b-adapt 2 --trellis 2
Movies longer than 130 minutes, grainy) = "TWEAK_PASS_TWO=--filter -3,-3 --me umh --subme 10 --merange 64 --b-adapt 2 --trellis 2 --psy-rd 1.0:0.15
ONEPASS_ENCODING=0
AUTO_QUALITY=0
AUDIO_TO_KEEP=chi;dan;eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=24500
TARGET_SIZE=23500
AUTO_BURN=2
MOVIEONLY_TYPE=0
ALTCRF=20
ALT_TARGET=1000
ALTMETHOD=0
ALTAUTOCROP=0
COMPLETION_BEEP=0
PRIORITY_CLASS=0
DGDECNV=0
WORKING_PATH=D:\BD-RBV04009\BD_REBUILDER\WORKING\
SOURCE_PATH=D:

[AmigaFuture]

@Revgen

When using WinRAR from the Desktop, Right-Click on the archive and a list will show. Left-Click "Extract here". The directory "BD_Rebuider" will be made and all files need are within it.
If you want to use XP's Internal Zip Handling.. Double click the archive. XP will display the contents of the archive. Drag And Drop the directory BD_Rebuilder to your Desktop (for now). Once extracted, locate it, double click the new directory and then BDRB. You should see the program running soon after if your XP install is functioning correctly. :-)

[jdobbs]

@hifreak

What does your system do on pass 2 if you remove the tweaks? If it's better, than the tweak is the problem.

Either way, it is definitely not the software. One other probable cause is that your system is overheating and the processor is slowing itself down to control the heat. Run a monitor (like CPUID HWMonitor) while encoding pass 2 -- if you see the CPU voltages drop during encoding, then that's why you are slow.

[hifreak]

@hifreak

What does your system do on pass 2 if you remove the tweaks? If it's better, than the tweak is the problem.

Either way, it is definitely not the software. One other probable cause is that your system is overheating and the processor is slowing itself down to control the heat. Run a monitor (like CPUID HWMonitor) while encoding pass 2 -- if you see the CPU voltages drop during encoding, then that's why you are slow.

Ok I will try to monitor I maybe have a feeling that it can be the heat now you mentioned that.

[hifreak]

I tried to monitor with Aida64 while I am running the 2 pass. Is it too hot I don´t think so right?

http://img846.imageshack.us/img846/1231/monitort.jpg

[RobertM]

I tried to monitor with Aida64 while I am running the 2 pass. Is it too hot I don´t think so right?
No, your temps certainly don't seem to be a problem.

A couple of other questions:
1. What is the CPU % usage during pass 2?
2. What quality setting are you using? I run an i7-950, mildly overclocked, and (just from memory here) I think I usually get around mid-teens for pass 2 FPS. If I swithced to "very high" then I wouldn't be surprised to see 10 FPS or less.
3. Maybe post your log too. I'm not saying that would contain the answer, but we'd have a more complete picture anyway.

[hifreak]

No, your temps certainly don't seem to be a problem.

A couple of other questions:
1. What is the CPU % usage during pass 2?
2. What quality setting are you using? I run an i7-950, mildly overclocked, and (just from memory here) I think I usually get around mid-teens for pass 2 FPS. If I swithced to "very high" then I wouldn't be surprised to see 10 FPS or less.
3. Maybe post your log too. I'm not saying that would contain the answer, but we'd have a more complete picture anyway.

I run high quality, but my CPU usage is very high 99-100 percent and I don´t have any other big things running. Is that normal?

[RobertM]

I run high quality, bu my CPU usage is very high 99-100 percent and I don´t have any other bigs running. Is that normal?

CPU usage SHOULD be around 100%, so that is certainly normal.

I'm not particularly familiar with the 2700K, but I imagine that if I removed my overclock my FPS would drop to the 10 FPS range. So I wouldn't think that anything major is broken in your system. Try disabling the tweaks, as per JDobbs suggestion, and see if that makes any difference.

[jdobbs]

@hifreak

Use CPUID HWMONITOR, as I suggested. It's free and is easy to find with Google. Keep it running during the encode of pass 2, and it will tell you the high/current/low temps over the course of the encode. Your CPU might speed up and slow down many times during an encode, so looking at the temp and wattage at any one point in time doesn't give any useful information. If you find that the "low" value for CPU wattage is different than current or high -- you know your processor is overheating and slowing itself down at different points, dramatically affecting speed.

I overclock, so I watch this very closely when setting up a system -- and believe me, this is something that happens on a lot, and people don't even know it. When the CPU fan gets to full speed (via PWM), and the processor is still pegged at a high temp, the ACPI will lower the CPU wattage to prevent damage from overheating. When that happens you might be running at 1/3 speed and there is no way of knowing it without monitoring.

The "Very High" setting will certainly bring the FPS down considerably. I never recommend that setting. It's just there for those who just can't live without it for some reason.

[hifreak]

@jdobbs

What is the tweak you are both talking about? I really don´t know so if it is enabled I am sure I did not knew how to do that ;)

[jdobbs]

@jdobbs

What is the tweak you are both talking about? I really don´t know so if it is enabled I am sure I did not knew how to do that ;)

????

This is what you posted:Movies shorter than 100 minutes, (almost) no grain) = "TWEAK_PASS_TWO=--filter -1,-1 --no-psy --aq-mode 0 --no-mbtree
Movies shorter than 100 minutes, grainy) = "TWEAK_PASS_TWO=--filter -3,-3 --aq-mode 0 --no-mbtree
Movies between 100 and 130 minutes, (almost) no grain) = "TWEAK_PASS_TWO=--filter -2,-2 --me umh --merange 32
Movies between 100 and 130 minutes, grainy) = "TWEAK_PASS_TWO=--filter -3,-3 --me umh --merange 32 --trellis 2
Movies longer than 130 minutes, (almost) no grain) = "TWEAK_PASS_TWO=--filter -3,-3 --me umh --subme 10 --merange 64 --b-adapt 2 --trellis 2
Movies longer than 130 minutes, grainy) = "TWEAK_PASS_TWO=--filter -3,-3 --me umh --subme 10 --merange 64 --b-adapt 2 --trellis 2 --psy-rd 1.0:0.15 I assumed that if you have this in your INI, you are using them... if not, where did they come from? BD-RB certainly didn't add those lines to your INI.

[Revgen]

Went into Safemode today and got it to work properly. Obviously there is something wrong with my normal WinXP setup. Not sure exactly what since my other programs work fine.

[Imperial Zeppelin]

Wondering if I'm the only one seeing this, but it seems that the latest release runs much hotter, >10 ºC hotter than I've ever seen before? No other application is showing unusually hotter temperatures.

[AmigaFuture]

Ravgen, use MSConfig (Windows Key+R then type it and press enter) since Safemode allowed access. A driver or other software is running in the background causing challenges..or something else. You could also start killing processes from Task Manger to see, remember Task Manager doesn't show ~Everything~. Because of your BD Rebuilder experience that indicates something else could also be that you've not ~yet~ noticed. :-) Nice to know you notice it worked in Safemode, does that also mean BDRB ran AND runs in Normal mode, including changes to INT being saved?

[omegaman7]

Wondering if I'm the only one seeing this, but it seems that the latest release runs much hotter, >10 ºC hotter than I've ever seen before? No other application is showing unusually hotter temperatures.

The 940 runs fairly hot. The revision I had anyway. I had to add a top exhaust fan to help it out. It dropped the temps 8 - 10C under load. Summer is approaching, and I'm due to blow out my case! ;)

[Audiophile1178]

jdobbs, regarding my post here (http://forum.doom9.org/showthread.php?p=1575401#post1575401) that I and dfsooner are having regarding the negative bitrate error. I have been doing several tests on the men in black II disc where the problem has been happening and no matter what I do it keeps on happening. I've actually encoded the disc with BDRebuilder using very fast one pass ABR settings in which the error didn't happen but the output BDRebuilder video is garbled and doesn't display anything related to the source. Another interesting thing is that the original video size is 119MB but the garbled encode that worked once in the single pass ABR turned out to be 1.61MB. The two videos that it's gettings stuck on are anti-piracy video information for belgium and I think belgie. Both videos are pretty much identical and don't seem like anything special from what I'm seeing using mediainfo. Same time and background. The only thing different is the text displayed ontop of the video which is formatted for that country. Since I saw what the video was I figured that my bluray player would ignore it due to region settings and sure enough it did and plays perfectly fine. I can't get that video to play anywhere on my bluray player.

This is what I've done to try and test it for you:

1. I had a suspicion that I had a bad memory stick. Sure enough I did. I removed it from the equation and BDRebuilder still failed.
2. Tried disabling/enabline LAVF in the settings. No Change.
3. Uninstalled everything and reinstalled it. No Change.
4. Deleted BDREBUILDER.INI and reset to default. No Change.


Tonight, I'm going to use an older version just for kicks to see what happens. I'll keep you apprised of the situation.


P.S. Any new info regarding my mummy encodes from here (http://forum.doom9.org/showthread.php?p=1574683#post1574683)?

[jdobbs]

jdobbs, regarding my post here (http://forum.doom9.org/showthread.php?p=1575401#post1575401) that I and dfsooner are having regarding the negative bitrate error. I have been doing several tests on the men in black II disc where the problem has been happening and no matter what I do it keeps on happening. I've actually encoded the disc with BDRebuilder using very fast one pass ABR settings in which the error didn't happen but the output BDRebuilder video is garbled and doesn't display anything related to the source. Another interesting thing is that the original video size is 119MB but the garbled encode that worked once in the single pass ABR turned out to be 1.61MB. The two videos that it's gettings stuck on are anti-piracy video information for belgium and I think belgie. Both videos are pretty much identical and don't seem like anything special from what I'm seeing using mediainfo. Same time and background. The only thing different is the text displayed ontop of the video which is formatted for that country. Since I saw what the video was I figured that my bluray player would ignore it due to region settings and sure enough it did and plays perfectly fine. I can't get that video to play anywhere on my bluray player.

This is what I've done to try and test it for you:

1. I had a suspicion that I had a bad memory stick. Sure enough I did. I removed it from the equation and BDRebuilder still failed.
2. Tried disabling/enabline LAVF in the settings. No Change.
3. Uninstalled everything and reinstalled it. No Change.
4. Deleted BDREBUILDER.INI and reset to default. No Change.


Tonight, I'm going to use an older version just for kicks to see what happens. I'll keep you apprised of the situation.


P.S. Any new info regarding my mummy encodes from here (http://forum.doom9.org/showthread.php?p=1574683#post1574683)? I fixed that one for the next release. I was able to repeat it on "The Sopranos, S1D5". It just happened that in that M2TS the audio was much longer than the video -- so when BD-RB tried to calculate the maximum bitrate allowable (after accounting for the audio size), it resulted in a negative value. The reason I didn't see it originally is because I wasn't keeping the original audio intact.

You should see a release with the fix soon.

[jdobbs]

Wondering if I'm the only one seeing this, but it seems that the latest release runs much hotter, >10 ºC hotter than I've ever seen before? No other application is showing unusually hotter temperatures. You're probably seeing the result of higher ambient temperatures -- because it's getting warmer in the northern hemisphere. It's also possible that your heatsink is collecting dust. But I don't think the temperature is related to any changes in BD-RB or its helper apps.

[Audiophile1178]

I fixed that one for the next release. I was able to repeat it on "The Sopranos, S1D5". It just happened that in that M2TS the audio was much longer than the video -- so when BD-RB tried to calculate the maximum bitrate allowable (after accounting for the audio size), it resulted in a negative value. The reason I didn't see it originally is because I wasn't keeping the original audio intact.

You should see a release with the fix soon.

Great to hear that you were able to duplicate it! I was starting to wonder if it was something to do with my system.

I have three questions for you:

First, I don't know if you saw my P.S. but did you have any idea what's happening with the mummy movies 480p~~>480i? I don't know if that'll cause any issues with pip when the original video is 1080p?

Second, if i'm experiencing no sound on the dts express on the mummy movies does that also mean that any other movie with pip such as watchman i'd experience the same issues?

Third, if hidden options are still experimental then would blanking be better off not being used? I just saw that it was there and how to enable it but haven't used it yet and don't know if there's any side effects to using it yet.


Thank you for your help on this and for making such a great program that one of a kind!

[jdobbs]

1. I still haven't looked at that one. But I've done many, many discs with 480p PiP and have never had that issue -- BD-RB gets the format from the source. I can't be positive, but my guess would be that 480i wouldn't work correctly with a 1080p base.

2. If you are not getting the sound then your player isn't recognizing it -- that makes it likely no other backed-up DTS Express source will work on that player either. I'm working that issue, but so far with no idea what it could be.

3. Not all hidden options are experimental. Blanking is experimental -- but not because it doesn't work correctly. I just haven't found a foolproof way to determine what should and should not be blanked in automatic selection modes (like Movie-and-Menus).

[hifreak]

????

This is what you posted: I assumed that if you have this in your INI, you are using them... if not, where did they come from? BD-RB certainly didn't add those lines to your INI.

Hi again actually it was my friend who installed those tweaks long time ago, I just forgot that :D Anyway It is a little faster now, so the tweaks was probably the reason. I will try not to use those tweaks. Thanks for the feedback.

[AmigaFuture]

Seems there's a bug with Loading and Saving projects. I edited 2 disks, manual blanking and saved the project for another moment. Then edited another disk. I saved that project. Quit BD-RB. Shut off Windows. The next time I used Windows, I ran BD-RB, and loaded 1 of the disk projects. I noticed the edits weren't there. I loaded the other project, edits weren't there for it either. I figured...perhaps they Are there just not reflected via GUI. So I ran the backup process. I just checked the rendered, yep...edits were not kept. They may have been saved by BD-RB, but not reloaded?

This applies for Full Backup. Option Auto-Blanking Extras seems to retain edits, but not customized editing; unchecking "Blank this item" then saving the project.

[jdobbs]

Seems there's a bug with Loading and Saving projects. I edited 2 disks, manual blanking and saved the project for another moment. Then edited another disk. I saved that project. Quit BD-RB. Shut off Windows. The next time I used Windows, I ran BD-RB, and loaded 1 of the disk projects. I noticed the edits weren't there. I loaded the other project, edits weren't there for it either. I figured...perhaps they Are there just not reflected via GUI. So I ran the backup process. I just checked the rendered, yep...edits were not kept. They may have been saved by BD-RB, but not reloaded?

This applies for Full Backup. Option Auto-Blanking Extras seems to retain edits, but not customized editing; unchecking "Blank this item" then saving the project. So by "edits" you mean specifically custom blanking/unblanking? Anything else not coming through?

[gg72]

@jdobbs, I found a bug when using x264's internal LAVF for decoding that causes undersized output and (potentially) out of specs streams, basically the demuxed original video is identify by LAVF as 25 fps regardless of the original framerate (23.976) /.../

I have the same problem: when I use the internal LAVF for decoding, the output has a different fps as the original.

The original has 29.970 fps, but it was identified by LAVF as 25 fps. The result: audio delay. The source was a concert movie with 1080i and 29.970 fps.

With film material and external serving (DirectShow) I havent any trouble yet.

Is there an explanation of it?

[AmigaFuture]

So by "edits" you mean specifically custom blanking/unblanking? Anything else not coming through?

Yes, custom un/blanking. I've checked 2 movies, and they look/sound good. SUPs are showing, audio sync in place.. More movies to check.. :)

Also...Even if I exit BD-RB, set unblank on 1 or 2 streams (containing audio/video, not SUPs) from what Auto-Blank Extras set to be blanked, and exit..then rerun BD-RB, the all extras are set to be blanked again.

Also, with respect to your comment about video encoding quality, I appreciate Highest (Very Slow) being there. I don't use it every time, but it's sweet to have it. Most may not notice, but for those of us who Do. 2 thumbs Up.

[Cela]

...
Still missing an _explanation_ ...
SourceCheck() 00006 2501 (for test BD 1)
SourceCheck() 00055 2501 (for test BD 2)
...
I bought a new BD drive (LG BE12LU38), but BD-RB V04009 still refuses to accept that BD with same messages as almost a month ago:
SourceCheck() 00055 2501
Illegal Source
Selected source is not BD format.
I get these messages even when I let BDRB open the original disk directly from the BD drive. This slows down BDRB processing, but makes it possible to get some impression of what BDRB is doing after browsing to the Source Path. Normally it takes ~ 10 seconds to check the streams and opens the source path.
But for this BD, which Slysoft support claims to open correctly, it does not take BDRB a second to refuse it without even inspecting the streams.

It should be possible to tell exactly from the error message what BDRB is expecting when it issues that message, else the message is completely useless if it does not provide a relevant clue.

So, I ask again, what is it that BDRB, after next to no investigation, decides
SourceCheck() 00055 2501
Illegal Source
Selected source is not BD format. ???
What does SourceCheck() 00055 2501 really mean?
Why can multiAVCHD repair this alleged Illegal Source? Why can't BDRB? What exactly is 'illegal'?

Edit:
ErrLog.txt
05.31.12 [12:44:42] SourceCheck() 00006 2501
05.31.12 [12:45:16] SourceCheck() 00055 2501
Remark: 1st message automatically during startup of BDRB,
2nd message at first user attempt (retry) to open BD drive.

[RobertM]

I bought a new BD drive (LG BE12LU38), but BD-RB V04009 still refuses to accept that BD with same messages as almost a month ago:
SourceCheck() 00055 2501
Illegal Source
Selected source is not BD format.

Disc that are formatted as BD require a specific format. You will see specific folder names ("BDMV", "CERTIFICATE", "STREAM", etc.) and some of those folders will be required to have specific content. If BDRB does not find the required formats it will throw that error. This has nothing to do with the optical drive, as long as the drive is working properly.

I get these messages even when I let BDRB open the original disk directly from the BD drive. This slows down BDRB processing, but makes it possible to get some impression of what BDRB is doing after browsing to the Source Path.
BDRB doesn't care where the information is -- just what the format is. It is recommended that you rip to HDD first simply because this speeds up the data reading process. The response time of the optical drive is slower, so it might be possible that you could run into trouble if the re-encoding process is starved for input data.

Normally it takes ~ 10 seconds to check the streams and opens the source path. But for this BD, which Slysoft support claims to open correctly, it does not take BDRB a second to refuse it without even inspecting the streams.
BDRB isn't scanning the files themselves. It has taken a look at the file structure and doesn't like what it sees. This doesn't take much time. Just because AnyDVD hasn't given you an error message doesn't mean that it has successfully decoded the disc. If it has been presented with an encryption scheme that it is not familiar with then it might fail silently. Are you using the latest version of AnyDVD?

After AnyDVD finishes its decryption, and before you even bother to run BDRB, what does the decrypted file structure look like to you? Does it look like other BD discs, especially the ones that have backed-up successfully for you in the past? Is there actual content in the "Stream" folder?

It should be possible to tell exactly from the error message what BDRB is expecting when it issues that message
"Selected source is not BD format" seems to be a pretty clear message to me.

What BD disc are you you trying to backup?

[jdobbs]

@cela

It's possible that something is corrupt in one of the MPLS files. They are scanned for legal references and chapter information when checking the source. Can you look and tell me how many MPLS files exist on that disc? They are found in the \BDMV\PLAYLIST folder. They're usually pretty small. Can you put them into a zip file and send them to me? Email to: dvd-rb@jdobbs.net

Other than the MPLS files, pretty much the only thing that is done in that section of code is checking to ensure the correct folders exist for BD compliance.

[Cela]

@jdobbs
Thanks for your willingness to investigate. You've got mail.
It's an exciting puzzle. I sincerely hope there will be a good solution.

[jdobbs]

@jdobbs
Thanks for your willingness to investigate. You've got mail.
It's an exciting puzzle. I sincerely hope there will be a good solution.

Got the files and was able to repeat the issue. It'll be fixed for the next release. Look for it in the next day or two.

[Cela]

...It'll be fixed for the next release. Look for it in the next day or two.I am very happy and grateful that you will be able to fix the flaws of my problem disk! Thank you so much! :) :thanks::

Disc that are formatted as BD require a specific format. ...
"Selected source is not BD format" seems to be a pretty clear message to me... I agree with you, its a clear message, but it is a verdict, a conclusion. It does let me understand the _reasons_ for the conclusion, _what shortcoming_ triggered the conclusion, what I should do better. In the discussion since posting #14921 on page 747 I tried to find out _what_ to do better, i.e. what exactly was wrong. Was it the physical disk? A vulneration of the required format? If so, then _what_ format item? Or, was it the drive? Or, was it that AnyDVD had missed something? Etc.

I am very happy now that jdobbs has found a solution for whatever was wrong with my disk and will implement it in the next release. :)

[jdobbs]

I am very happy now that jdobbs has found a solution for whatever was wrong with my disk and will implement it in the next release. :) The truth is that your disc wasn't "illegal" or "wrong". As it turns out, a part of one of the MPLS files was just exceptionally odd. So the issue was in BD-RB in that it wasn't robust enough to handle that odd (but legal) circumstance.

[RobertM]

In the discussion since posting #14921 on page 747 I tried to find out _what_ to do better, i.e. what exactly was wrong. Was it the physical disk? A vulneration of the required format? If so, then _what_ format item? Or, was it the drive? Or, was it that AnyDVD had missed something? Etc.

You are right that, everything else being equal, it would be better if the error messages were more meaningful to the end user, but it would take some effort on JDobbs' part to provide all those additional messages. The errors have to be reported to JDobbs for resolution anyway, and he already knows what the error codes mean.

I'm just so used to BDRebuilder NOT being the problem -- almost always it is a bad rip, bad decode, pre-processing, faulty drive, overheating processor, etc.

[jdobbs]

You are right that, everything else being equal, it would be better if the error messages were more meaningful to the end user, but it would take some effort on JDobbs' part to provide all those additional messages. The errors have to be reported to JDobbs for resolution anyway, and he already knows what the error codes mean.

I'm just so used to BDRebuilder NOT being the problem -- almost always it is a bad rip, bad decode, pre-processing, faulty drive, overheating processor, etc. You're right. The problem is that there are thousands of possible errors that could happen in a standard as complex as blu-ray. If I tried to create an error message for every one I'd do nothing but type error messages for the next 2 years. The messages aren't meant for the end-user. They are meant to point me to the right place so I can fix it.

[dfsooner]

I got the error shown below last night. Got the same error selecting BD-9.

I couldn't find any setting in .ini or in hidden options that would seem relevant. Any suggestions?


[05:29:32] Source: SOPRANOS_S6D3
- Input BD size: 30.20 GB
- Approximate total content: [02:45:23.997]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Quality: High-Speed Option (BD-25), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[05:29:33] PHASE ONE, Encoding
- [05:29:33] Processing: VID_00002 (1 of 3)
- [05:29:33] Extracting A/V streams [VID_00002]
- [05:36:48] Reencoding video [VID_00002]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 77,835 frames
- Bitrate: 12,826 Kbs
- [05:36:48] Reencoding: VID_00002, Pass 1 of 2
- [05:36:49] Reencoding: VID_00002, Pass 2 of 2
- [06:14:08] Video Encode complete
- [06:14:08] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (spa): Keeping original audio
- [06:14:08] Multiplexing M2TS
- [06:18:45] Processing: VID_00004 (2 of 3)
- [06:18:45] Extracting A/V streams [VID_00004]
- Error in attempt to extract audio/subs.
- AV frame too large (65532 bytes). Increase AV buffer.
[06:21:46] - Failed to retrieve audio, aborted


[Status]
LABEL=SOPRANOS_S6D3
VERSION=v0.40.09 (beta)
SOURCE_SIZE=32428507588
SOURCE_VIDEO_SIZE=31940352000
TARGET_SIZE=24641536000
REDUCTION=.756202699707254
RESIZE_1080=0
AUDIO_TO_KEEP=all
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=all
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=1
[00002]
AUDIO=11
PGS=1111
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=7999935971
RATE=12826
SPLITS=1
NSTART=27000000
NEND=173086560
NSIZE=7537858560
FLINK=0
MLINK=0
[00004]
AUDIO=111
PGS=11111

[RobertM]

- AV frame too large (65532 bytes). Increase AV buffer.


I've had this error before -- it was a bad rip.

[dfsooner]

I've had this error before -- it was a bad rip.

I suppose that's possible but it plays fine with TMT. How do you increase AV buffer?

[jdobbs]

I suppose that's possible but it plays fine with TMT. How do you increase AV buffer?

It's a bad rip.

Never confuse "playing" with "decoding and reencoding" -- playing can ignore errors, decoding/reencoding can't.

The error comes from TSMUXER. The AV buffer isn't really the issue. That's just where the corrupt source showed itself. You'd probably get it no matter how big you made the buffer.

[Revgen]

I was able to solve the run-time error I reported earlier. I found out about a program called "process explorer". So I ran BD Rebuilder and processexplorer told me that one of the places BD Rebuilder first goes to when it's opened is the Application Data folder in Documents and Settings. I went there and found that most of the folders are hidden, including the BD Rebuilder folder. So I decided to unhide them all and see what happens. Now it starts without a hitch. No errors. I rehid the Application Data\BDREBUILDER folder again, and I got the error again. Apparently BDRebuilder doesn't like hidden files or folders.

[jdobbs]

I was able to solve the run-time error I reported earlier. I found out about a program called "process explorer". So I ran BD Rebuilder and processexplorer told me that one of the places BD Rebuilder first goes to when it's opened is the Application Data folder in Documents and Settings. I went there and found that most of the folders are hidden, including the BD Rebuilder folder. So I decided to unhide them all and see what happens. Now it starts without a hitch. No errors. I rehid the Application Data\BDREBUILDER folder again, and I got the error again. Apparently BDRebuilder doesn't like hidden files or folders. It's your O/S that is in error. BD-Rebuilder doesn't access those specifically -- it is the redirection of your O/S that does it. Apps are supposed to have access to the application data folders. In other words, something is misconfigured in your system.

[Revgen]

It's your O/S that is in error. BD-Rebuilder doesn't access those specifically -- it is the redirection of your O/S that does it. Apps are supposed to have access to the application data folders. In other words, something is misconfigured in your system.

Hmm...interesting. Unfortunately I can't begin to fathom where the misconfiguration is.

I'm just glad it's working now.

[ceet12]

hi jdobbs, quick question not used bd rebuilder for a while as bd drive broke and i have since bought a new one,

when trying to set up the codecs as described on the first page, i think i set up some wrong, or couldn't find the exact setting, as i right clicked inspect, and opened the program, and it seemed to correct everything for me automatically as since clicking inspect again everything is set to ok?, im assuming that it should work correct as inspect has set it for me, or do i need to go back into ffshow and rest manually?

also im recently trying to rip a backup blu ray with ipbot and its asking me to update my ffdshow to rev 4400 or newer, if i update, would this break the bd rebuilder settings?

Hope you can help, thanks again

[jdobbs]

hi jdobbs, quick question not used bd rebuilder for a while as bd drive broke and i have since bought a new one,

when trying to set up the codecs as described on the first page, i think i set up some wrong, or couldn't find the exact setting, as i right clicked inspect, and opened the program, and it seemed to correct everything for me automatically as since clicking inspect again everything is set to ok?, im assuming that it should work correct as inspect has set it for me, or do i need to go back into ffshow and rest manually?

also im recently trying to rip a backup blu ray with ipbot and its asking me to update my ffdshow to rev 4400 or newer, if i update, would this break the bd rebuilder settings?

Hope you can help, thanks again BD-RB will set the CODECs for you if you right-click and "Run as Administrator"... but INSPECT doesn't do so.

As for FFDSHOW, it depends on the version used and any bugs in it. I haven't tested any of the newer versions, the last one I've tested is 4052. It should be ok to upgrade -- but if you run into any problems, revert to one of the recommended releases before reporting anything as a bug in BD-RB.

[Ch3vr0n]

if everything is set as ok, then you should be good to go unless you're using any kind of codec pack like klite etc. If you do, remove em. They usually interfere with BDRB's operations. Do NOT update to 4400 or newer. It has not been tested to work correctly with BDRB. If you do update, you do so at your own risc for multiple reasons. 1) The latest versions are not tried & tested and probably do not work correctly like BDRB wants them too and 2) jdobbs does not accept any kind of bug report from versions that do not match the ones in the first post

[Atak_Snajpera]

if latest ffdshow works in ripbot so it has to also work in bdrb.

[AmigaFuture]

Hmm...interesting. Unfortunately I can't begin to fathom where the misconfiguration is.

I'm just glad it's working now.

That's why I suggested using MSConfig. It's _a_ step to answering the question "Why?". That's still my suggestion while you're now enjoying using BD-RB. :D

[Revgen]

That's why I suggested using MSConfig. It's _a_ step to answering the question "Why?". That's still my suggestion while you're now enjoying using BD-RB. :D

I tried MSConfig with "diagnostic startup" before I unhid the application data. The problem was still present. So it's a fairly specific issue that's deeply rooted.

[HiQ123]

A question to jdoobs:

I read in the Frequently Asked Questions thread about AUTO_BIAS=n the following:

"You replace the "n" with one of 3 values: 0, 1, or 2. "0" tells the quality selection to have a bias toward speed, "1" (the default) balances speed and quality, and "2" tells the quality selection algorithim to have a bias toward higher quality."

But in the HIDDENOPTS file it says: n = 0-3 - Def=1, Auto Qual bias, 0=high speed, 1=normal, 2=high quality, 3=highest qual

Can I use 3? What is the difference between 2 and 3 (quality and speed)?

[jdobbs]

A question to jdoobs:

I read in the Frequently Asked Questions thread about AUTO_BIAS=n the following:

"You replace the "n" with one of 3 values: 0, 1, or 2. "0" tells the quality selection to have a bias toward speed, "1" (the default) balances speed and quality, and "2" tells the quality selection algorithim to have a bias toward higher quality."

But in the HIDDENOPTS file it says: n = 0-3 - Def=1, Auto Qual bias, 0=high speed, 1=normal, 2=high quality, 3=highest qual

Can I use 3? What is the difference between 2 and 3 (quality and speed)? Those values change the thresholds in which BD-RB makes decisions within "Automatic" quality settings. It doesn't change any settings specifically, only the points at which BD-RB decides it needs to increase quality settings. "3" is a legal value, I'll update the docs.

[jdobbs]

I have updated the first post of this thread with a link to an updated release of BD-RB (v0.40.10). Changes for this release:- Corrected an issue related to unusual MPLS files
that could result in "SourceCheck() 00006 2501" at
program startup or during scanning.
- Corrected an error in which under very unusual and
rare circumstances the bitrate can be calculated
as a negative number. This could result in encode
failure.
- Made several improvements to increase speed and
provide greater resilience.
- Added a new hidden option "OVERWRITE_PROMPT". If
set to "0", BD-RB will not prompt for overwrite
when the output folder already exists. Instead it
will rename the output folder.
- Updated the included version of X264.EXE to the
latest release (r2200).
- Updated the included version of X264-64.EXE to
the latest release (r2200).
- Other minor corrections and cosmetic fixes.

[Sharc]

Hmmm... not sure how that could happen. It looks like it gets close to the target size with the first CRF, and does one more tweak before encoding -- which for some reason swings it way off-kilter. I'll take a look at it.

Did you have a chance to look into this?

[jdobbs]

Did you have a chance to look into this? Not yet. I'm still constrained by other work. I looked at it quickly and didn't find anything. I'll work on it for the next release.

[omegaman7]

You're awesome Jdobbs. Thanks a lot! :)

[worknstiff]

@ jdobbs: RE: BD-RB (v0.40.10). - Corrected an issue related to unusual MPLS files
that could result in "SourceCheck() 00006 2501" at program startup or during scanning.

I just tried the Hannibal Rising BD (Momentum Import All Region A-B-C title) that previously had the Source Check Error. It now throws up a Source Check () 00006 2503, Selected source is not BD Format. This disk is weird enough that it has a 25MB 11 second m2ts thats added in front of the 2:10:00 minute m2ts. If I try to create a BD folder with Clown it plays ok except that the runtime shows up as 13:10:00 and has a hard time changing chapters, it completely crashes TMT5 when FF or chapter skip but it does play. The resulting Clown BD that is created throws up the same not BD format error that the original Hannibal folder does. I finally had to extrract the streams and create a new BD of this disk to run through BD_RB. thanks again for the hard work you do on this great program. worknstiff

[jdobbs]

@ jdobbs: RE: BD-RB (v0.40.10). - Corrected an issue related to unusual MPLS files
that could result in "SourceCheck() 00006 2501" at program startup or during scanning.

I just tried the Hannibal Rising BD (Momentum Import All Region A-B-C title) that previously had the Source Check Error. It now throws up a Source Check () 00006 2503, Selected source is not BD Format. This disk is weird enough that it has a 25MB 11 second m2ts thats added in front of the 2:10:00 minute m2ts. If I try to create a BD folder with Clown it plays ok except that the runtime shows up as 13:10:00 and has a hard time changing chapters, it completely crashes TMT5 when FF or chapter skip but it does play. The resulting Clown BD that is created throws up the same not BD format error that the original Hannibal folder does. I finally had to extrract the streams and create a new BD of this disk to run through BD_RB. thanks again for the hard work you do on this great program. worknstiff

Hmmm... I tried to find that disc online... I only see Region A/1 and B/2 versions available at Amazon. Can you point me to a place where I can get the problem disc?

[worknstiff]

Sorry about that, It is just listed as region B/2 on Amazon but on the back of the case it's listed as ABC. Here is the product listed on Amazon Hannibal Rising (Uncut Edition) . (http://www.amazon.com/gp/product/B001AS7VQM/ref=oh_details_o03_s00_i00)
Hope this helps, worknstiff

[Scorpio1]

I have attached below the specs of the BD-R disks I am using and I have 2 questions.

1) I have set BD Rebuilder to a custom output size of 23866mb (23.32gb), and imgburn is set to make an ISO at the end of the conversion process, I frequently get images that are too big to fit on one of the disks though, so I have tried to complete the process by manually burning to disk, IMGburn still tells me the filesize is too big for the disk. What is the actual CUSTOM SIZE I should be using with BDRebuilder (23866 is obviously too big)?

2) The disks are obviously capable of burning at 8x according to imgburn but the packaging says they are rated at 4x - which is correct?

Disk specs follow obtained via DVDinfo pro

HL-DT-ST BD-RE BH10LS30 1.01 (ATA)
Current Profile: BD-R

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 12,219,392
Free Space: 25,025,314,816 bytes
Free Time: 2715:27:17 (MM:SS:FF)
Next Writable Address: 0
MID: PHILIP-R04-000
Supported Write Speeds: 2x, 4x, 6x, 8x

Disc Definition Structure:
Certified: No
Scanned: No
Manufacturers Name: HL-DT-ST
Additional ID: BD-RE BH10LS30
Serial Number: K9GA28B2634

BD Disc Information:
Disc ID: PHILIP-R04-000
Disc Type: BD-R
Disc Size: 120mm
Disc Class: 0
Disc Version: 1
Number of Layers: 1
Layer Type: Writable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.50nm (25GB Per Layer)
Push-Pull Polarity: Positive
Recorded Mark Polarity: HTL
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494

Format Capacities:
DT: 0x01 - NB: 12219392 (0x00BA7400) - TDP: 151552
FT: 0x00 - NB: 11826176 (0x00B47400) - TDP: 12288
FT: 0x32 - NB: 11826176 (0x00B47400) - TDP: 12288
FT: 0x32 - NB: 7369728 (0x00707400) - TDP: 151552
FT: 0x32 - NB: 12088320 (0x00B87400) - TDP: 4096

Performance (Write Speed):
Descriptor 1...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44,879 KB/s (10x) - WS: 8,991 KB/s (2x)
Descriptor 2...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44,879 KB/s (10x) - WS: 17,982 KB/s (4x)
Descriptor 3...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44,879 KB/s (10x) - WS: 26,973 KB/s (6x)
Descriptor 4...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44,879 KB/s (10x) - WS: 35,964 KB/s (8x)


Anyway my questions are :-

1) What size should I be putting in the Custom size option to make sure that BDRebuilder doesn't make the rip too big, but still uses as much of the available space as possible?

2) What write speed should I use, I have used 8x and everything seems to be OK, but normally for peace of mind I have been burning at 4x.:thanks:

[jdobbs]

The best option for a BD-R disc (25GB) is to use the default for BD-25. It has been sized to: 1.) Assure inaccuracies in sizing don't cause issues. 2.) Avoid the outer edges of the disc (that are prone to error). Trying to squeeze that little extra out of the disc doesn't give you any measurable improvement in quality -- and just causes headaches.

I'd recommend you use 1/2 the rated write speed on discs that are rated more than 4x. So for an 8x, I'd suggest burning at 4x. I've been doing that for a long time, and I've had very good luck with disc reliability and longevity.

[colinhunt]

My aim is to always get as close to 25,000,000,000 bytes as possible. I've learned through trial and error that a custom size of 24150 - 24400, depending on the amount of titles on disc, results in output very close to the target. That worked for 0.40.09, at least. We'll see what happens with the new version.

I haven't had any problems with writing to edge of disc but that's mostly because I use a good burner and excellent media from a quality manufacturer. The media is rated 6x but the burner supports 12x for this particular media. I've done successful writes at 10x that pass both verify run and Opti Drive Control's write quality test. However, I do most writes at 6x.

[colinhunt]

I thought this one had been squashed already but bumped into it on 04009 and 04010 last night:

BD Rebuilder experienced an error 1801 [07:23:02] ReencodeAudio()
00075 1801

As before, prompted by a short title (493 frames in this case) which has two apparently identical PCM tracks.

[jdobbs]

I thought this one had been squashed already but bumped into it on 04009 and 04010 last night:

BD Rebuilder experienced an error 1801 [07:23:02] ReencodeAudio()
00075 1801

As before, prompted by a short title (493 frames in this case) which has two apparently identical PCM tracks. That means that a path doesn't exist. It could be the path to the audio encoder, the AVS file, or the working/source paths. In any event -- the error is passed to BD-RB from the operating system.

Please note that without the logs being posted, many of these reports become meaningless. For instance, in this one I have no idea whether it is a full backup, a movie-only, or output to MKV/MP4. That makes a huge difference. I'm happy to find and fix errors... but I can't do that when I'm groping around in the dark.

[colinhunt]

That means that a path doesn't exist. It could be the path to the audio encoder, the AVS file, or the working/source paths. In any event -- the error is passed to BD-RB from the operating system.
That's quite mysterious! In the case of this backup, I managed to manually fix the problem by making a copy of the 4352.AC3 file BD-RB had created (first of the two PCM files always gets converted to AC3 without problems, then the second one fails), renaming the copy as the missing 4353.AC3, then asking BD-RB to resume. BD-RB sees that the previously missing 4353.AC3 file now exists and resumes happily to muxing, then rebuilds the backup without further errors.

On this disc the audio error took place right at the end of the process, so once I had copied and renamed the AC3 file, it took only a few seconds from Resume to finished backup.

Please note that without the logs being posted, many of these reports become meaningless. For instance, in this one I have no idea whether it is a full backup, a movie-only, or output to MKV/MP4. That makes a huge difference. I'm happy to find and fix errors... but I can't do that when I'm groping around in the dark.
Ah, sorry. It was a full backup, no blanking. Here's the log:

[06.07.12] BD Rebuilder v0.40.10 (beta)
[23:41:47] Source: GANJA_AND_HESS
- Input BD size: 36,56 GB
- Approximate total content: [02:26:53.846]
- Target BD size: 23,58 GB
- Windows Version: 6.1 [7601]
- Quality: Highest (Very Slow), Two Pass
- X264 Tweak(s) enabled
- Decoding/Frame serving: DGDecNV
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[23:41:49] PHASE ONE, Encoding
- [23:41:49] Processing: VID_00003 (1 of 6)
- [23:41:49] Extracting A/V streams [VID_00003]
- [23:44:06] Reencoding video [VID_00003]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 29,970fps, 53*330 frames
- Bitrate: 16*397 Kbs
- [23:44:06] Reencoding: VID_00003, Pass 1 of 2
- [00:01:40] Reencoding: VID_00003, Pass 2 of 2
- [01:07:55] Video Encode complete
- [01:07:55] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [01:08:01] Multiplexing M2TS
- [01:09:25] Processing: VID_00004 (2 of 6)
- [01:09:25] Extracting A/V streams [VID_00004]
- [01:09:32] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 256 frames
- Bitrate: 4*437 Kbs
- [01:09:32] Reencoding: VID_00004, Pass 1 of 2
- [01:09:38] Reencoding: VID_00004, Pass 2 of 2
- [01:09:45] Video Encode complete
- [01:09:45] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Reencoding audio to AC3...
- [01:09:46] Multiplexing M2TS
- [01:09:49] Processing: VID_00005 (3 of 6)
- [01:09:49] Extracting A/V streams [VID_00005]
- [01:09:56] Reencoding video [VID_00005]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 240 frames
- Bitrate: 2*740 Kbs
- [01:09:56] Reencoding: VID_00005, Pass 1 of 2
- [01:10:01] Reencoding: VID_00005, Pass 2 of 2
- [01:10:06] Video Encode complete
- [01:10:06] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Reencoding audio to AC3...
- [01:10:07] Multiplexing M2TS
- [01:10:10] Processing: VID_00006 (4 of 6)
- [01:10:10] Extracting A/V streams [VID_00006]
- [01:20:32] Reencoding video [VID_00006]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 161*970 frames
- Bitrate: 22*277 Kbs
- [01:20:32] Reencoding: VID_00006, Pass 1 of 2
- [02:22:41] Reencoding: VID_00006, Pass 2 of 2
- [07:11:27] Video Encode complete
- [07:11:27] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Reencoding audio to AC3...
- [07:12:46] Multiplexing M2TS
- [07:22:22] Processing: VID_00007 (5 of 6)
- [07:22:22] Extracting A/V streams [VID_00007]
- [07:22:26] Reencoding video [VID_00007]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 29,970fps, 30 frames
- Bitrate: 500 Kbs
- [07:22:26] Reencoding: VID_00007, Pass 1 of 2
- [07:22:28] Reencoding: VID_00007, Pass 2 of 2
- [07:22:30] Video Encode complete
- [07:22:30] Processing audio tracks
- [07:22:30] Multiplexing M2TS
- [07:22:33] Processing: VID_00043 (6 of 6)
- [07:22:33] Extracting A/V streams [VID_00043]
- [07:22:42] Reencoding video [VID_00043]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 493 frames
- Bitrate: 3*306 Kbs
- [07:22:42] Reencoding: VID_00043, Pass 1 of 2
- [07:22:52] Reencoding: VID_00043, Pass 2 of 2
- [07:23:02] Video Encode complete
- [07:23:02] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Reencoding audio to AC3...
- [07:23:02] ReencodeAudio() 00075 1801
[10:25:18] - Failed to reencode audio, aborted
---------------------- <-- COPIED & RENAMED AC3 FILE, THEN RESUMED.
[06.08.12] BD Rebuilder v0.40.10 (beta)
[10:26:20] Source: GANJA_AND_HESS
- Input BD size: 36,56 GB
- Approximate total content: [02:26:53.846]
- Target BD size: 23,58 GB
- Windows Version: 6.1 [7601]
- Quality: Highest (Very Slow), Two Pass
- X264 Tweak(s) enabled
- Decoding/Frame serving: DGDecNV
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
- Resuming from previously started job.
[10:26:21] PHASE ONE, Encoding
- [10:26:21] Processing: VID_00043 (6 of 6)
- [10:26:21] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Reencoding audio to AC3...
- [10:26:22] Multiplexing M2TS
[10:26:26]PHASE ONE complete
[10:26:26]PHASE TWO - Rebuild Started
- [10:26:26] Rebuilding BD file Structure
[10:26:47] - Encode and Rebuild complete
[10:26:47] JOB: GANJA_AND_HESS finished.

[jdobbs]

So it appears that track 4353 was never extracted. Are you sure it actually exists in the source? Sometimes preprocessing can remove tracks but leave the references, any chance you ran it through some other software for any reason first?

[colinhunt]

So it appears that track 4353 was never extracted. Are you sure it actually exists in the source?
Absolutely. MediaInfo of the source file:

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Muxing mode : Blu-ray
Codec ID : 128
Duration : 20s 555ms
Bit rate mode : Constant
Bit rate : 2 304 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Stream size : 5.65 MiB (36%)

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Muxing mode : Blu-ray
Codec ID : 128
Duration : 20s 555ms
Bit rate mode : Constant
Bit rate : 2 304 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Stream size : 5.65 MiB (36%)

I can also extract both tracks from the file using MeGUI's HD Stream Extractor and eac3to.

Sometimes preprocessing can remove tracks but leave the references, any chance you ran it through some other software for any reason first?
Nope, this was a very normal AnyDVD rip from disc to hard drive.

Every time this error occurs, the culprit is a small file which has two or more (one had 5!) identical PCM tracks. On this disc, 00043.m2ts is white static text block on black background and the audio tracks appear to be empty.

It looks to me like some authoring shops try to minimize problems by including the same number of audio tracks on all files. In other words, if the main feature contains 3 dubs (for example english, french and spanish), all extra features and even menus have three audio tracks - even though those tracks are identical in content.

[jdobbs]

It probably is a part of a playlist with another M2TS that has that audio stream present. Streams that share a playlist should have the same number of audio streams. In most circumstances if it is not needed it should be a stream that contains some type of audio (even if it is silence). If the file doesn't exist at the time of reencoding, I have to suspect it isn't really there. It might just be referenced in the PAT/PMT headers of the M2TS (which might fool MediaInfo).

TSMUXER does the demuxing and should have created that file, open that M2TS with TSMUXER and see what it says about track 4353. I'd suggest you also try demuxing it and see what happens.

[colinhunt]

TSMUXER does the demuxing and should have created that file, open that M2TS with TSMUXER and see what it says about track 4353. I'd suggest you also try demuxing it and see what happens.
TSMUXER shows two PCM audio tracks (2304Kbps, 48Khz, 24-bit) and demuxes both nicely. (I mentioned in my previous post I can extract both tracks.)

[jdobbs]

TSMUXER shows two PCM audio tracks (2304Kbps, 48Khz, 24-bit) and demuxes both nicely. (I mentioned in my previous post I can extract both tracks.) Ok then, I'm confused. I thought the extracted track was missing -- and you corrected it by copying/renaming the first track for the encode. I guess that apparently isn't the case. So I have no idea what is happening.

[dfsooner]

It's a bad rip.

Never confuse "playing" with "decoding and reencoding" -- playing can ignore errors, decoding/reencoding can't.

The error comes from TSMUXER. The AV buffer isn't really the issue. That's just where the corrupt source showed itself. You'd probably get it no matter how big you made the buffer.

I re-ripped the disc and still got the same error. I'm trying to get hold of another copy of the disc. I'll rip it using a different drive (& manufacturer) and see if I get the same problem.

In the meantime I've pulled out the offending LPCM audio track, run BDRB and muxed the audio back in and it seems to work ok.

[jdobbs]

I re-ripped the disc and still got the same error. I'm trying to get hold of another copy of the disc. I'll rip it using a different drive (& manufacturer) and see if I get the same problem.

In the meantime I've pulled out the offending LPCM audio track, run BDRB and muxed the audio back in and it seems to work ok. What did you use to pull the audio?

[dfsooner]

What did you use to pull the audio?

I used tsmuxer and deselected the audio stream. However, it created a .wav file during the process that I plugged back into the compressed version of the m2ts, also using tsmuxer. That was on a version compressed to 21000.

Interestingly, when I did the same thing to a version compressed to 6500, tsmuxer failed when trying to insert the LPCM stream. I expected either both to succeed or both to fail. Not sure what is going on.

Still trying to get another copy of the disc, however to try a distinctly different rip. I'm hoping to pin it down to either a bad disc or a problem with my original drive.

[colinhunt]

Ok then, I'm confused.
Sorry, my bad, I'm sure.

I thought the extracted track was missing -- and you corrected it by copying/renaming the first track for the encode. I guess that apparently isn't the case. So I have no idea what is happening.
Yes, the extracted track was missing and that caused the ReencodeAudio() error. In other words, tsmuxer was unable to extract the track during BD-RB processing.
I corrected the problem by making a copy of 4352.ac3 (which BD-RB had successfully created) and renaming it 4353.ac3, then resuming BD-RB.

Everything I did and posted about after that was to test & prove that 00043.m2ts does in fact contain two PCM tracks. I ran TSMUXER, dropped 00043.m2ts into it, selected both PCM tracks, chose Demux as output and tsmuxer extracted two PCM tracks.

In other words, tsmuxer failed to extract one of the two PCM tracks during BD-RB operation -- but extracted both fine when I operated tsmuxer as a stand-alone app.

[asiafan]

Hi i am poiting this question to Jdobbs i got 1st time ever problem with lastest Rebuilder. Since this version my reencoding is finishing @ 25,5 GB (27 451 559 936)
doesnt matter if i choose target 25GB or manuall it ends @27GB. Even after removing LPCM audio still same. Best way its to use 2 previous versions but as usuall expired :(

[Yordan5]

With this version my encodings seem to finish between 0.5 and 1.5Gb smaller (depending on the size of the original movie - the larger it is the bigger the difference is between target size and actual size BDRebuilder produces) than what I specify in the Custom Target Size option. This was not the case with previous versions. If a log is needed I'll do another back up and will provide it. I did Transformers 3 (original size just over 38Gb) and set the Custom target size to 20Gb. The eventual back up was 18.5Gb. Next I did Planet Earth disk 1 (original size just over 22Gb) and set the Custom target size to 16.1Gb the eventual back up ended up 15.6Gb. The settings were Two Pass, High Quality, keeping original HD Audio.

[jdobbs]

@asiafan
@Yordan5

Nothing has changed in this version that affects sizing in any way (except possibly the new version of X264 -- but that is very, very unlikely). I would suggest you uninstall/reinstall FFDSHOW, HAALI, and AVISYNTH.

[dfsooner]

I used tsmuxer and deselected the audio stream. However, it created a .wav file during the process that I plugged back into the compressed version of the m2ts, also using tsmuxer. That was on a version compressed to 21000.

Interestingly, when I did the same thing to a version compressed to 6500, tsmuxer failed when trying to insert the LPCM stream. I expected either both to succeed or both to fail. Not sure what is going on.

Still trying to get another copy of the disc, however to try a distinctly different rip. I'm hoping to pin it down to either a bad disc or a problem with my original drive.

OK. Here's an update:

I have now ripped this 5 times with two different original discs on three different blu-ray drives from two different manufacturers. I get exactly the same error in every case.

Because the error is generated from tsmuxer, I have to assume that either there is a bug in tsmuxer or an authoring anomaly in the title itself. Not sure there is any way around it at this point. I even tried converting the LPCM track to AC3 using Audacity but had some sound gaps that made it unusable. Ideas anyone?

[asiafan]

@asiafan
@Yordan5

Nothing has changed in this version that affects sizing in any way (except possibly the new version of X264 -- but that is very, very unlikely). I would suggest you uninstall/reinstall FFDSHOW, HAALI, and AVISYNTH.


i will be reencoding few others BDs so i will inform you if this is just matter or single BD or matter of x264 version


this last BD was 27GB so i done quickly BD25 fast two pass
mode + DTS HD => ac3 .





PS can i put x264 files older to new version or its pointless? :D

[laserfan]

I have now ripped this 5 times with two different original discs on three different blu-ray drives from two different manufacturers. I get exactly the same error in every case.

Because the error is generated from tsmuxer, I have to assume that either there is a bug in tsmuxer or an authoring anomaly in the title itself...Ideas anyone?
Only time I've seen txmuxer fail is with a "bad" subtitle track, so (long shot) try muxing w/o a sub and see if that works.

[jdobbs]

i will be reencoding few others BDs so i will inform you if this is just matter or single BD or matter of x264 version


this last BD was 27GB so i done quickly BD25 fast two pass
mode + DTS HD => ac3 .





PS can i put x264 files older to new version or its pointless? :D

Please follow the advice about reinstalling the helper apps before trying other things (as I recommended). It is the likely source of your error.

[colinhunt]

Bumped into a peculiar disc: Thin Ice (http://www.amazon.com/Thin-Ice-Blu-ray-Greg-Kinnear/dp/B007RKFY0W). It's 46GB in total and contains two large .m2ts files. 00000.m2ts is 18.9GB and 00034.m2ts is 21GB. The latter, when played in MPC-HC, has a running time of 109 minutes. 00000.m2ts, while a smaller file, has a running time of more than 200 minutes -- but when one tries to skip ahead, MPC-HC crashes.

I tried to create a full backup of the disc while blanking 00034.m2ts (and trailers):

[06.12.12] BD Rebuilder v0.40.10 (beta)
[19:23:51] Source: THIN_ICE
- Input BD size: 23,35 GB
- Approximate total content: [04:15:08.634]
- Target BD size: 23,78 GB
- Windows Version: 6.1 [7601]
- Quality: Highest (Very Slow), Two Pass
- X264 Tweak(s) enabled
- Decoding/Frame serving: DGDecNV
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[19:23:53] PHASE ONE, Encoding
- [19:23:53] Processing: VID_00000 (1 of 28)
- [19:23:53] Extracting A/V streams [VID_00000]
- [19:29:32] Reencoding video [VID_00000]
- [19:29:32] Keeping original video (no reencode)
- [19:29:32] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:29:32] Multiplexing M2TS
- [19:29:38] Processing: VID_00024 (2 of 28)
- [19:29:38] Extracting A/V streams [VID_00024]
- [19:29:49] Reencoding video [VID_00024]
- [19:29:49] Keeping original video (no reencode)
- [19:29:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:29:49] Multiplexing M2TS
- [19:29:54] Processing: VID_00025 (3 of 28)
- [19:29:54] Extracting A/V streams [VID_00025]
- [19:30:02] Reencoding video [VID_00025]
- [19:30:02] Keeping original video (no reencode)
- [19:30:02] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:30:02] Multiplexing M2TS
- [19:30:06] Blanking: VID_00026 (4 of 28)
- [19:30:06] Blanking: VID_00034 (5 of 28)
- [19:30:06] Processing: VID_00035 (6 of 28)
- [19:30:06] Extracting A/V streams [VID_00035]
- [19:30:15] Reencoding video [VID_00035]
- [19:30:15] Keeping original video (no reencode)
- [19:30:15] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:30:15] Multiplexing M2TS
- [19:30:19] Processing: VID_00101 (7 of 28)
- [19:30:19] Extracting A/V streams [VID_00101]
- [19:32:53] Reencoding video [VID_00101]
- [19:32:53] Keeping original video (no reencode)
- [19:32:53] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:32:53] Multiplexing M2TS
- [19:34:20] Processing: VID_00102 (8 of 28)
- [19:34:20] Extracting A/V streams [VID_00102]
- [19:35:42] Reencoding video [VID_00102]
- [19:35:42] Keeping original video (no reencode)
- [19:35:42] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:35:42] Multiplexing M2TS
- [19:35:56] Processing: VID_00104 (9 of 28)
- [19:35:56] Extracting A/V streams [VID_00104]
- [19:36:16] Reencoding video [VID_00104]
- [19:36:16] Keeping original video (no reencode)
- [19:36:16] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:36:16] Multiplexing M2TS
- [19:36:27] Processing: VID_00105 (10 of 28)
- [19:36:27] Extracting A/V streams [VID_00105]
- [19:36:39] Reencoding video [VID_00105]
- [19:36:39] Keeping original video (no reencode)
- [19:36:39] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:36:39] Multiplexing M2TS
- [19:36:44] Processing: VID_00106 (11 of 28)
- [19:36:44] Extracting A/V streams [VID_00106]
- [19:36:58] Reencoding video [VID_00106]
- [19:36:58] Keeping original video (no reencode)
- [19:36:58] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:36:58] Multiplexing M2TS
- [19:37:03] Processing: VID_00107 (12 of 28)
- [19:37:03] Extracting A/V streams [VID_00107]
- [19:37:15] Reencoding video [VID_00107]
- [19:37:15] Keeping original video (no reencode)
- [19:37:15] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:37:15] Multiplexing M2TS
- [19:37:20] Processing: VID_00108 (13 of 28)
- [19:37:20] Extracting A/V streams [VID_00108]
- [19:37:32] Reencoding video [VID_00108]
- [19:37:32] Keeping original video (no reencode)
- [19:37:32] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:37:32] Multiplexing M2TS
- [19:37:38] Processing: VID_00109 (14 of 28)
- [19:37:38] Extracting A/V streams [VID_00109]
- [19:37:49] Reencoding video [VID_00109]
- [19:37:49] Keeping original video (no reencode)
- [19:37:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:37:49] Multiplexing M2TS
- [19:37:54] Processing: VID_00110 (15 of 28)
- [19:37:54] Extracting A/V streams [VID_00110]
- [19:38:05] Reencoding video [VID_00110]
- [19:38:05] Keeping original video (no reencode)
- [19:38:05] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:38:05] Multiplexing M2TS
- [19:38:11] Processing: VID_00111 (16 of 28)
- [19:38:11] Extracting A/V streams [VID_00111]
- [19:38:24] Reencoding video [VID_00111]
- [19:38:24] Keeping original video (no reencode)
- [19:38:24] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:38:24] Multiplexing M2TS
- [19:38:31] Processing: VID_00112 (17 of 28)
- [19:38:31] Extracting A/V streams [VID_00112]
- [19:38:43] Reencoding video [VID_00112]
- [19:38:43] Keeping original video (no reencode)
- [19:38:43] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:38:43] Multiplexing M2TS
- [19:38:48] Processing: VID_00113 (18 of 28)
- [19:38:48] Extracting A/V streams [VID_00113]
- [19:39:00] Reencoding video [VID_00113]
- [19:39:00] Keeping original video (no reencode)
- [19:39:00] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:39:00] Multiplexing M2TS
- [19:39:05] Processing: VID_00114 (19 of 28)
- [19:39:05] Extracting A/V streams [VID_00114]
- [19:39:19] Reencoding video [VID_00114]
- [19:39:19] Keeping original video (no reencode)
- [19:39:19] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:39:19] Multiplexing M2TS
- [19:39:24] Processing: VID_00115 (20 of 28)
- [19:39:24] Extracting A/V streams [VID_00115]
- [19:39:37] Reencoding video [VID_00115]
- [19:39:37] Keeping original video (no reencode)
- [19:39:38] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:39:38] Multiplexing M2TS
- [19:39:43] Processing: VID_00116 (21 of 28)
- [19:39:43] Extracting A/V streams [VID_00116]
- [19:40:01] Reencoding video [VID_00116]
- [19:40:01] Keeping original video (no reencode)
- [19:40:01] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:40:01] Multiplexing M2TS
- [19:40:10] Processing: VID_00318 (22 of 28)
- [19:40:10] Extracting A/V streams [VID_00318]
- [19:40:23] Reencoding video [VID_00318]
- [19:40:23] Keeping original video (no reencode)
- [19:40:23] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:40:23] Multiplexing M2TS
- [19:40:29] Blanking: VID_00325 (23 of 28)
- [19:40:29] Blanking: VID_00326 (24 of 28)
- [19:40:29] Blanking: VID_00327 (25 of 28)
- [19:40:29] Blanking: VID_00328 (26 of 28)
- [19:40:29] Processing: VID_00340 (27 of 28)
- [19:40:29] Extracting A/V streams [VID_00340]
- [19:40:41] Reencoding video [VID_00340]
- [19:40:41] Keeping original video (no reencode)
- [19:40:41] Processing audio tracks
- [19:40:41] Multiplexing M2TS
- [19:40:46] Processing: VID_00343 (28 of 28)
- [19:40:46] Extracting A/V streams [VID_00343]
- [19:40:57] Reencoding video [VID_00343]
- [19:40:57] Keeping original video (no reencode)
- [19:40:57] Processing audio tracks
- [19:40:57] Multiplexing M2TS
[19:41:02]PHASE ONE complete
[19:41:02]PHASE TWO - Rebuild Started
- [19:41:02] Rebuilding BD file Structure
[19:41:37] - Encode and Rebuild complete
[19:41:37] JOB: THIN_ICE finished.

At some point during the process, BD-RB popped up a dialog window to report that an audio type is different from reported, asked me to choose which audio type to use. (Can't remember the exact wording of the dialog window, but I'm sure jdobbs knows which one I mean.)

Here's where things go weird: 00000.m2ts and 00034.m2ts are not in the same playlist, so BD-RB lets me blank 00034.m2ts -- and you can see from the log BD-RB processes 00000.m2ts by keeping original video and audio -- but the final output is less than 5GB in size.

Yes, I'm using custom size but I don't think this is related to that. Just a guess, mind you :)

[dfsooner]

Only time I've seen txmuxer fail is with a "bad" subtitle track, so (long shot) try muxing w/o a sub and see if that works.

Tried to remux with only the video and the primary LPCM audio - no other audio and no subtitles. Tsmuxer failed. Thanks for the suggestion though.

[jdobbs]

Bumped into a peculiar disc: Thin Ice (http://www.amazon.com/Thin-Ice-Blu-ray-Greg-Kinnear/dp/B007RKFY0W). It's 46GB in total and contains two large .m2ts files. 00000.m2ts is 18.9GB and 00034.m2ts is 21GB. The latter, when played in MPC-HC, has a running time of 109 minutes. 00000.m2ts, while a smaller file, has a running time of more than 200 minutes -- but when one tries to skip ahead, MPC-HC crashes.

I tried to create a full backup of the disc while blanking 00034.m2ts (and trailers):

[06.12.12] BD Rebuilder v0.40.10 (beta)
[19:23:51] Source: THIN_ICE
- Input BD size: 23,35 GB
- Approximate total content: [04:15:08.634]
- Target BD size: 23,78 GB
- Windows Version: 6.1 [7601]
- Quality: Highest (Very Slow), Two Pass
- X264 Tweak(s) enabled
- Decoding/Frame serving: DGDecNV
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
...
[19:41:02]PHASE ONE complete
[19:41:02]PHASE TWO - Rebuild Started
- [19:41:02] Rebuilding BD file Structure
[19:41:37] - Encode and Rebuild complete
[19:41:37] JOB: THIN_ICE finished.

At some point during the process, BD-RB popped up a dialog window to report that an audio type is different from reported, asked me to choose which audio type to use. (Can't remember the exact wording of the dialog window, but I'm sure jdobbs knows which one I mean.)

Here's where things go weird: 00000.m2ts and 00034.m2ts are not in the same playlist, so BD-RB lets me blank 00034.m2ts -- and you can see from the log BD-RB processes 00000.m2ts by keeping original video and audio -- but the final output is less than 5GB in size.

Yes, I'm using custom size but I don't think this is related to that. Just a guess, mind you :)

The message you mentioned is actually coming from DGDecNV. I think it is telling you that the PAT/PMT of the M2TS doesn't match the MPLS & CLPI files.

[colinhunt]

The message you mentioned is actually coming from DGDecNV. I think it is telling you that the PAT/PMT of the M2TS doesn't match the MPLS & CLPI files.
I'm pretty sure that's the one, yes. Does that have any bearing on the very small output size?

[colinhunt]

Thin Ice is an interesting specimen for another reason: the Director's Cut playlist includes an additional bit shown before the movie.. which messes up audio sync if one tries to do a movie-only backup.

[jdobbs]

I'm pretty sure that's the one, yes. Does that have any bearing on the very small output size? Actually it's more likely that it is telling you the PAT/PMT tables don't match the actual stream. I doubt that the DGDecNV driver looks at the MPLS/CLPI.

[colinhunt]

Actually it's more likely that it is telling you the PAT/PMT tables don't match the actual stream. I doubt that the DGDecNV driver looks at the MPLS/CLPI.
OK. When I have a moment, I'll run the backup again the same way to see what it's actually telling me.

[ttringle]

I have a motherboard with Virtu support, is there a way to enable virtu support in FFDShow to speed up the re-encoding process, or enable CUDA on my main video card for the same purpose?

Thanks

TimT

[jdobbs]

I have a motherboard with Virtu support, is there a way to enable virtu support in FFDShow to speed up the re-encoding process, or enable CUDA on my main video card for the same purpose?

Thanks

TimT

I'm not that familiar wiht Virtu, but CUDA is supported through DGDecNV decoding, assuming you have it installed (see the SETUP dialog). As some point in the future it might also be available through support of LAV filters.

[ttringle]

jdobbs,

Quick question, can I use DVD Rebuilder Pro to upscale a 480p DVD to 720p or 1080p? I know there wouldn't be any improvement in video quality other than bypassing my televisions scaler but I'm just curious.

[jdobbs]

jdobbs,

Quick question, can I use DVD Rebuilder Pro to upscale a 480p DVD to 720p or 1080p? I know there wouldn't be any improvement in video quality other than bypassing my televisions scaler but I'm just curious. DVD Rebuilder doesn't output to anything but legal DVD resolutions.

In BD Rebuilder (the subject of this thread) it's pretty easy. Just select "Convert SD to 720p" or "Convert SD to 1080p" in the SETUP dialog.

You can use multiAVCHD to convert a DVD to BD pretty easily -- and use that as the source for BD-RB. There are several other ways to do it also.

[xterminater]

jdobbs, I have tried to research on why bd-rb blank out dts-express mono audio but have no luck finding on how to not have it delete that audio. Is there a way to force BD-RB to keep the dts-express mono audio?

[Audiophile1178]

jdobbs, I have tried to research on why bd-rb blank out dts-express mono audio but have no luck finding on how to not have it delete that audio. Is there a way to force BD-RB to keep the dts-express mono audio?

This used to be in the hiddenopts.txt but for some reason it's no longer there. Just put DTSX_ENABLE=1 in your bdrebuilder.ini (you can put it right underneath [Options])and it'll keep dts express for you. Remember to save the bdrebuilder.ini after you insert the line.

Note, even though it'll keep the dts express the dts express sound might still not work. I have this issue myself and jdobbs is aware that certain players will read the encode and other ones won't. He'll eventually figure it out! He's a smart fella!


Jdobbs, I have some questions for you. I'm doing a complete disc encode of an episode disc of a tv series and the original disc is 43.2GB with a bdrebuilder output of 22.4GB. Taking a look at one episode using bdinfo and MPC the original bitrate is ~14,000 Kb/s and the bdrebuilder bitrate is ~4,500 Kb/s. From my reading it seems like this bitrate is far too low for 1080p? Would it be best to convert it to 720p?

Also, I don't want to do this with these discs but for future reference could I blank half the episodes and putting them on one bluray disc with the other half on another bluray? I thought about doing this but it would take too many bluray discs and cost too much.

Thank you for your continued support on a great program!

[jdobbs]

This used to be in the hiddenopts.txt but for some reason it's no longer there. Just put DTSX_ENABLE=1 in your bdrebuilder.ini (you can put it right underneath [Options])and it'll keep dts express for you. Remember to save the bdrebuilder.ini after you insert the line.

Note, even though it'll keep the dts express the dts express sound might still not work. I have this issue myself and jdobbs is aware that certain players will read the encode and other ones won't. He'll eventually figure it out! He's a smart fella!


Jdobbs, I have some questions for you. I'm doing a complete disc encode of an episode disc of a tv series and the original disc is 43.2GB with a bdrebuilder output of 22.4GB. Taking a look at one episode using bdinfo and MPC the original bitrate is ~14,000 Kb/s and the bdrebuilder bitrate is ~4,500 Kb/s. From my reading it seems like this bitrate is far too low for 1080p? Would it be best to convert it to 720p?

Also, I don't want to do this with these discs but for future reference could I blank half the episodes and putting them on one bluray disc with the other half on another bluray? I thought about doing this but it would take too many bluray discs and cost too much.

Thank you for your continued support on a great program! Whether 4,500Kbs is too little is dependent upon the source. If it is less than other episodes, it would mean that the original also uses less for that one. I'd watch it and see if it is noticable before I'd worrry about it. It's really odd to see a bitrate that low on a BD-25 backup, though... how many hours does it show in the log?

Yes, you could make a backup in the way you describe. You could, for instance on a disc that had 8 episodes, blank the second 4 on the first backup and blank the first 4 on the second.

[Audiophile1178]

First of all, does blanking a title just produce a blank (black?) video of low bitrate to save space or eliminate the title from the disc? I've never used blanking before so I don't know.


I didn't expect such a quick response... I just read that if your bitrate is around 4,000Kb/s it's better to go for 720p as they'll be more information per frame since it's a lower resolution. I did a bdrebuilder encode of 1080p and 720p. I'm currently deciding which one to burn. Whichever one I go with I'll do the rest that way. I even looked at only keeping the DTS core and not the full DTS-HD.MA but that'll only gain me 1GB per eposide so I didn't think that i'll gain that much in picture quality so I kept the high def audio.

The discs are Star Trek The Original Series and each episode is 50 mins long. I've only touched one disc so far and it has four episodes on it. I'm pretty sure that the rest of the discs will have 4 episodes as well. Each episode has an original unmastered video and a digitally mastered one so that the viewer can switch between the two and see how it originally aired. Some episodes also have pip of commentary and stuff but I don't think that i'm going to be able to hear the audio since it's DTS Express.


It took me 10 hours to encode this bad boy at the settings below!!!


[22:46:22] Source: STAR_TREK_SEASON_2__DISC_1
- Input BD size: 43.28 GB
- Approximate total content: [04:49:35.632]
- Target BD size: 23.54 GB
- Windows Version: 6.1 [7601]
- SHUTDOWN at completion enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640


BTW, I just scanned all episodes with BDinfo and the originals were all around 14,000 Kb/s and the encode were around 4,900 Kb/s.

[jdobbs]

You can't use bitrate as a finite "if then else" decision parameter. It isn't something that functions on its own, it depends on other factors as well (like source complexity and encoding bells-and-whistles used). I've done a lot of encoding at lower bitrates with much success. You'll also find a lot of high quality MKV & MP4 files floating around that look good with a lot less...

Blanking replaces the original video with a short (~.5 second) blank video.

Not sure how halving the size of the disc cuts the bitrate by that much? There must be a huge portion that is kept intact?

[Audiophile1178]

Not sure how halving the size of the disc cuts the bitrate by that much? There must be a huge portion that is kept intact?

Thanks for the blanking info... I too was a bit surprised at the final bitrate result. I figured that cutting the disc in half would result in half the bitrate (~7,000Kb/s) and not a third of the original. It's very hard to tell if anything is kept in tact as the titles seems to be using seemless branching (forgive me if that's the incorrect term). There are 121 .m2ts files which seem like most of those files make up all four episodes except for one files that's a bonus video of 12 minutes (which is 1.5GB in size) about them making the shows.


Out of all the files that make up the four episodes there are: (2x) 4.5GB, (2x) 3.5GB, (2x) 2.5GB, (2x) 1.5GB, and the rest are below 1GB. Bdrebuilders log shows that it encoded 91 files. A majority of the files for the episodes are below 1GB. I know some of the files are menus and other things so it looks like it encoded everything correctly.


As you can see from the beginning of the log in the previous post that there was almost 5 hours of 1080p video on this one disc! That pretty much explains why the original is only 14,000Kb/s. Any higher and they'd have to put less episodes on each disc. If you think about it though it's 1960's Star Trek! Even if you had a higher bitrate it wouldn't make the video quality any better. :D


BTW, what would I look for in the 1080p encode to see if it's bad? Pixelization? Every encode that i've done with x264 no matter how low the bitrate gets looks fine to me but then again my tv is a 60" 720p so that could explain why i've never seen bad video since it's not full 1080p.

[jdobbs]

Thanks for the blanking info... I too was a bit surprised at the final bitrate result. I figured that cutting the disc in half would result in half the bitrate (~7,000Kb/s) and not a third of the original. It's very hard to tell if anything is kept in tact as the titles seems to be using seemless branching (forgive me if that's the incorrect term). There are 121 .m2ts files which seem like most of those files make up all four episodes except for one files that's a bonus video of 12 minutes (which is 1.5GB in size) about them making the shows.


Out of all the files that make up the four episodes there are: (2x) 4.5GB, (2x) 3.5GB, (2x) 2.5GB, (2x) 1.5GB, and the rest are below 1GB. Bdrebuilders log shows that it encoded 91 files. A majority of the files for the episodes are below 1GB. I know some of the files are menus and other things so it looks like it encoded everything correctly.


As you can see from the beginning of the log in the previous post that there was almost 5 hours of 1080p video on this one disc! That pretty much explains why the original is only 14,000Kb/s. Any higher and they'd have to put less episodes on each disc. If you think about it though it's 1960's Star Trek! Even if you had a higher bitrate it wouldn't make the video quality any better. :D


BTW, what would I look for in the 1080p encode to see if it's bad? Pixelization? Every encode that i've done with x264 no matter how low the bitrate gets looks fine to me but then again my tv is a 60" 720p so that could explain why i've never seen bad video since it's not full 1080p. If you don't see pixelation in darkest scenes, you're usually good to go.

I know I have the first season of Star Trek (TOS), but can't remember if I have all the seasons. If I do, I'll test that disc.

They did a really good job with those discs. They went back to the original film prints and created HD from them. They also give you the option of using newer (more up-to-date) graphics (on the space scenes and the bridge's "big screen"). It is really impressive.

They'll be coming out with TNG in HD using the same concepts this year (season one in July)... can't wait. I got the preview disc w/three episodes on it -- looks pretty good. It's a little disconcerting, though, to think that after I paid for all 7 seasons on DVD, I may have to do the same on BD...

[ihmcjacky]

I have followed strictly the instruction on the first page, but still got error on converting my adele concert blu-ray disc to 25gb discs, the following is the log

[06/15/12] BD Rebuilder v0.40.10 (beta)
[10:57:54] Source: ADELE
- Input BD size: 26.40 GB
- Approximate total content: [02:00:05.331]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[10:57:54] PHASE ONE, Encoding
- [10:57:54] Processing: VID_00000 (1 of 3)
- [10:57:54] Extracting A/V streams [VID_00000]
- [11:15:48] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 29.970fps, 178,602 frames
- Bitrate: 23,493 Kbs
- [11:15:48] Reencoding: VID_00000, Pass 1 of 1
- Encode failed. Aborting.
- BD-Rebuilder v0.40.10 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[11:15:49] - Failed video encode, aborted

My computer configuration:
Intel Core i7 2600
8gb ram
win7 64 bit ultimate

Will it be the bug of the software?

[jdobbs]

Is this the first time you've run it, or has it worked for you before? Sometimes other software changes the settings without telling you. Try uninstalling and reinstalling AVISYNTH, FFDSHOW, and HAALI.

[ihmcjacky]

Is this the first time you've run it, or has it worked for you before? Sometimes other software changes the settings without telling you. Try uninstalling and reinstalling AVISYNTH, FFDSHOW, and HAALI.
I have tried what I can do, including reinstalling all softwares. And I cannot have a single success on converting....

Planning to try other softwares

Any way thanks!

[Jonaldinho]

Hi, I know this is my fault but I left BD Rebuilder to encode to a BD25 size and I ran out of disk space. I just checked the progress and it had come up with an error that it couldn't rebuild because it couldn't find 00102.m2ts. It is there so I cleared some hard drive space and resumed the job but come up with another error. I've changed the encode step to 4 which is the step before 00102.m2ts and deleted the log from 00102.m2ts in the INI. Do I need to move the m2ts files and the clpi files back to the WORKFILES folder to get it to rebuild properly? They're just short videos to encode now.

[RobertM]

Do I need to move the m2ts files and the clpi files back to the WORKFILES folder to get it to rebuild properly?

I would strongly suggest that, given the errors that you are seeing, you should just begin again from scratch. Making sure, of course, that you have sufficient disc space this time, and that means MORE than 25GB (since BDRB has to create working files before writing to the target files).

[worknstiff]

@ Jonaldinho RE:BD25 size and I ran out of disk space.

This has probably happened to all of us at one time or another. After you make enough room to finish the encode and rebuild (usually at least twice the size of the original BD), you restart BD_Rebuilder and make sure that you have the EXACT SAME setting's that you made the FIRST TIME (playlists, audio and subs and still have the same size output), then you are good to go. BD_Rebuilder will pickup where it left off and rebuild the Bluray structure, if it is only on the re-encoding step it will restart what ever step it was on before it crashed (ie: pass 1 or 2). Good Luck, worknstiff

[Jonaldinho]

Thanks, I deleted the main movie encoded .264 file because it had already been muxed into an m2ts file, I always do this and it always works but because there was an error I think I need it now. I'll keep it in future to be safe if there's an error again. So now i've made space by deleting files that aren't related to the project. I have moved all the newly created m2ts files into the STREAM folder. There's the same amount as the original so I just need it to be rebuilt into a Blu-ray file structure. I have copyied everything to the new workpath except the original STREAM folder and I know that at least the clpi files need to be changed so I tried inputting the new structure into BD Rebuilder hoping it would remux and change the clpi files to be compatible but it didn't work because it's expecting other audio streams. Would changing the hidden option 'FIX_MOVIEONLY' to 0 fix this. If not I would start from scratch.

[Flanker-B]

I have followed strictly the instruction on the first page, but still got error on converting my adele concert blu-ray disc to 25gb discs, the following is the log

[06/15/12] BD Rebuilder v0.40.10 (beta)
[10:57:54] Source: ADELE
- Input BD size: 26.40 GB
- Approximate total content: [02:00:05.331]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[10:57:54] PHASE ONE, Encoding
- [10:57:54] Processing: VID_00000 (1 of 3)
- [10:57:54] Extracting A/V streams [VID_00000]
- [11:15:48] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 29.970fps, 178,602 frames
- Bitrate: 23,493 Kbs
- [11:15:48] Reencoding: VID_00000, Pass 1 of 1
- Encode failed. Aborting.
- BD-Rebuilder v0.40.10 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[11:15:49] - Failed video encode, aborted

My computer configuration:
Intel Core i7 2600
8gb ram
win7 64 bit ultimate

Will it be the bug of the software?

Have you tried to change settings in FFDshow video decoder settings for h264/avc from ffmpeg-mt to libavcodec?

[jdobbs]

Hi, I know this is my fault but I left BD Rebuilder to encode to a BD25 size and I ran out of disk space. I just checked the progress and it had come up with an error that it couldn't rebuild because it couldn't find 00102.m2ts. It is there so I cleared some hard drive space and resumed the job but come up with another error. I've changed the encode step to 4 which is the step before 00102.m2ts and deleted the log from 00102.m2ts in the INI. Do I need to move the m2ts files and the clpi files back to the WORKFILES folder to get it to rebuild properly? They're just short videos to encode now. Subtract one from the COMPLETED= entry and you should be able to pick up one file before you hit the issue.

[k-c-ksum]

been a while since i backed anything up, any way, noticed you have dts express support so i dug out and old favorite. The Fast and the Furious. It uses VC1 for the main movie and 2 PIP secondary tracks. After RB has done its thing and created the backup (Slow 2 pass for the main video, 1 pass CRF for the extras) i opened it in cyberlink powerdvd 11. All worked well apart from the dts express audio couldnt be heard. Reading back i see it works on some players and not on others. Curiously i opened the backup in RB and noticed the secondary tracks are flagged as 480i 23.976 were as the original rip is flagged as 480p vc1. Maybe this is causing the player to get confused and subsequently not playing the audio as its expecting the secondary video to be progressive?

[jdobbs]

been a while since i backed anything up, any way, noticed you have dts express support so i dug out and old favorite. The Fast and the Furious. It uses VC1 for the main movie and 2 PIP secondary tracks. After RB has done its thing and created the backup (Slow 2 pass for the main video, 1 pass CRF for the extras) i opened it in cyberlink powerdvd 11. All worked well apart from the dts express audio couldnt be heard. Reading back i see it works on some players and not on others. Curiously i opened the backup in RB and noticed the secondary tracks are flagged as 480i 23.976 were as the original rip is flagged as 480p vc1. Maybe this is causing the player to get confused and subsequently not playing the audio as its expecting the secondary video to be progressive? Hmm.... I don't think that's the problem with the audio -- but I'll do some checking on the video. I got a similar report recently and forgot to follow-up.

[ihmcjacky]

Have you tried to change settings in FFDshow video decoder settings for h264/avc from ffmpeg-mt to libavcodec?
Of course I did, but same happens

[jdobbs]

been a while since i backed anything up, any way, noticed you have dts express support so i dug out and old favorite. The Fast and the Furious. It uses VC1 for the main movie and 2 PIP secondary tracks. After RB has done its thing and created the backup (Slow 2 pass for the main video, 1 pass CRF for the extras) i opened it in cyberlink powerdvd 11. All worked well apart from the dts express audio couldnt be heard. Reading back i see it works on some players and not on others. Curiously i opened the backup in RB and noticed the secondary tracks are flagged as 480i 23.976 were as the original rip is flagged as 480p vc1. Maybe this is causing the player to get confused and subsequently not playing the audio as its expecting the secondary video to be progressive? I ran some tests overnight and they came out correctly. Can you post your settings (the content of BDREBUILDER.INI)?

[Prz]

I've passed the inspect program but still get the following message at burn time.

"BD Rebuilder experienced and error 2306 [11:00:39] DoEncoding0 00053 2306"

Any thoughts on a fix for this?

[jdobbs]

I've passed the inspect program but still get the following message at burn time.

"BD Rebuilder experienced and error 2306 [11:00:39] DoEncoding0 00053 2306"

Any thoughts on a fix for this? That error indicates that some file that BD-Rb is attempting to open a file that doesn't exist. It's possible that something has been deleted

Are you sure you have ImgBurn installed correctly?

[k-c-ksum]

I ran some tests overnight and they came out correctly. Can you post your settings (the content of BDREBUILDER.INI)?

[Options]
VERSION=0.40.0.10
MODE=0
ENABLE_TEST=1
ENCODE_QUALITY=3
ONEPASS_ENCODING=0
AUTO_QUALITY=0
QUICK_EXTRAS=1
QUICK_CRF=25
QUICK_USE_QUALITY=1
TARGET_SIZE=23800
ENABLE_BLANKING=1
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
DTSX_ENABLE=1
CUSTOM_TARGET_SIZE=23400
MINIMIZE_TO_TRAY=1
DGDECNV=0
[Paths]
SOURCE_PATH=C:\TEMP\BLU_ENCODES\FATF\
WORKING_PATH=C:\TEMP\BLU_ENCODES\

[Prz]

The error occurs from files previouly saved and burned by BDR correctly so I think they're complete. I'll try a new one from scratch to be sure. IMGburn seems to be installed correctly but can you point me to the correct way to install IMGburn so I can verify?

[jdobbs]

The error occurs from files previouly saved and burned by BDR correctly so I think they're complete. I'll try a new one from scratch to be sure. IMGburn seems to be installed correctly but can you point me to the correct way to install IMGburn so I can verify?As long as you use the installation routine that comes with ImgBurn you should be ok.

[Prz]

Tried a "fresh" disk to burn and received the same error message: Below is the log...any assessment?

[06/18/12] BD Rebuilder v0.40.10 (beta)
[11:55:01] Source: CHRONICLE
- Input BD size: 19.98 GB
- Approximate total content: [01:23:53.403]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[11:55:05] PHASE ONE, Encoding
- [11:55:05] Processing: VID_00600 (1 of 19)
- [11:55:05] Extracting A/V streams [VID_00600]
- [11:58:04] Reencoding video [VID_00600]
- [11:58:04] Keeping original video (no reencode)
- [11:58:04] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [11:58:04] Processing: VID_00620 (2 of 19)
- [11:58:04] Extracting A/V streams [VID_00620]
- [11:58:13] Reencoding video [VID_00620]
- [11:58:14] Keeping original video (no reencode)
- [11:58:14] Processing: VID_00602 (3 of 19)
- [11:58:14] Extracting A/V streams [VID_00602]
- [11:58:19] Reencoding video [VID_00602]
- [11:58:19] Keeping original video (no reencode)
- [11:58:19] Processing: VID_00621 (4 of 19)
- [11:58:19] Extracting A/V streams [VID_00621]
- [11:58:26] Reencoding video [VID_00621]
- [11:58:26] Keeping original video (no reencode)
- [11:58:26] Processing: VID_00604 (5 of 19)
- [11:58:26] Extracting A/V streams [VID_00604]
- [11:58:38] Reencoding video [VID_00604]
- [11:58:38] Keeping original video (no reencode)
- [11:58:38] Processing: VID_00622 (6 of 19)
- [11:58:38] Extracting A/V streams [VID_00622]
- [11:58:42] Reencoding video [VID_00622]
- [11:58:42] Keeping original video (no reencode)
- [11:58:42] Processing: VID_00606 (7 of 19)
- [11:58:42] Extracting A/V streams [VID_00606]
- [11:59:09] Reencoding video [VID_00606]
- [11:59:09] Keeping original video (no reencode)
- [11:59:09] Processing: VID_00623 (8 of 19)
- [11:59:09] Extracting A/V streams [VID_00623]
- [11:59:15] Reencoding video [VID_00623]
- [11:59:15] Keeping original video (no reencode)
- [11:59:15] Processing: VID_00608 (9 of 19)
- [11:59:15] Extracting A/V streams [VID_00608]
- [11:59:22] Reencoding video [VID_00608]
- [11:59:22] Keeping original video (no reencode)
- [11:59:22] Processing: VID_00624 (10 of 19)
- [11:59:22] Extracting A/V streams [VID_00624]
- [11:59:28] Reencoding video [VID_00624]
- [11:59:28] Keeping original video (no reencode)
- [11:59:28] Processing: VID_00610 (11 of 19)
- [11:59:28] Extracting A/V streams [VID_00610]
- [11:59:57] Reencoding video [VID_00610]
- [11:59:57] Keeping original video (no reencode)
- [11:59:57] Processing: VID_00625 (12 of 19)
- [11:59:57] Extracting A/V streams [VID_00625]
- [12:00:01] Reencoding video [VID_00625]
- [12:00:01] Keeping original video (no reencode)
- [12:00:01] Processing: VID_00612 (13 of 19)
- [12:00:01] Extracting A/V streams [VID_00612]
- [12:00:11] Reencoding video [VID_00612]
- [12:00:11] Keeping original video (no reencode)
- [12:00:11] Processing: VID_00626 (14 of 19)
- [12:00:11] Extracting A/V streams [VID_00626]
- [12:00:16] Reencoding video [VID_00626]
- [12:00:16] Keeping original video (no reencode)
- [12:00:16] Processing: VID_00614 (15 of 19)
- [12:00:16] Extracting A/V streams [VID_00614]
- [12:00:25] Reencoding video [VID_00614]
- [12:00:25] Keeping original video (no reencode)
- [12:00:25] Processing: VID_00627 (16 of 19)
- [12:00:25] Extracting A/V streams [VID_00627]
- [12:00:29] Reencoding video [VID_00627]
- [12:00:29] Keeping original video (no reencode)
- [12:00:29] Processing: VID_00616 (17 of 19)
- [12:00:29] Extracting A/V streams [VID_00616]
- [12:01:02] Reencoding video [VID_00616]
- [12:01:02] Keeping original video (no reencode)
- [12:01:02] Processing: VID_00628 (18 of 19)
- [12:01:02] Extracting A/V streams [VID_00628]
- [12:01:06] Reencoding video [VID_00628]
- [12:01:06] Keeping original video (no reencode)
- [12:01:06] Processing: VID_00629 (19 of 19)
- [12:01:06] Extracting A/V streams [VID_00629]
- [12:01:24] Reencoding video [VID_00629]
- [12:01:24] Keeping original video (no reencode)
[12:01:24]PHASE ONE complete
[12:01:24]PHASE TWO - Rebuild Started
- [12:01:24] Rebuilding BD file Structure
[12:12:50] - Encode and Rebuild complete
[12:12:50] BURNING BD structure to disc
- [12:12:50] DoEncoding() 00053 2306
[12:13:26] - Failed to complete.

[Audiophile1178]

Hmm.... I don't think that's the problem with the audio -- but I'll do some checking on the video. I got a similar report recently and forgot to follow-up.

Jdobbs, I was the other one having the same problem with 2 out of the 3 mummy discs. Ironically, BDrebuilder encoded one of the pip correctly to 480p but the other two were encoded as 480i. If you want me to post my ini for these discs I will do it as well.


I've made it a habit to burn the log file and ini file to every disc just for reference if needed in the future. ;) I also burn the bdinfo report from the original disc, as well as, the bdrebuilder disc so that I can see how much everything got compressed.

[jdobbs]

Tried a "fresh" disk to burn and received the same error message: Below is the log...any assessment?

[06/18/12] BD Rebuilder v0.40.10 (beta)
[11:55:01] Source: CHRONICLE
- Input BD size: 19.98 GB
- Approximate total content: [01:23:53.403]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[11:55:05] PHASE ONE, Encoding
...
[12:01:24]PHASE ONE complete
[12:01:24]PHASE TWO - Rebuild Started
- [12:01:24] Rebuilding BD file Structure
[12:12:50] - Encode and Rebuild complete
[12:12:50] BURNING BD structure to disc
- [12:12:50] DoEncoding() 00053 2306
[12:13:26] - Failed to complete. I just followed the code, and the most probable way you could get that error at that point is if the path to ImgBurn.exe not correctly represented in the system egistry. The registry path is set by ImgBurn during installation.

I would suggest you uninstall ImgBurn and reinstall it.

[jdobbs]

[Options]
VERSION=0.40.0.10
MODE=0
ENABLE_TEST=1
ENCODE_QUALITY=3
ONEPASS_ENCODING=0
AUTO_QUALITY=0
QUICK_EXTRAS=1
QUICK_CRF=25
QUICK_USE_QUALITY=1
TARGET_SIZE=23800
ENABLE_BLANKING=1
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
DTSX_ENABLE=1
CUSTOM_TARGET_SIZE=23400
MINIMIZE_TO_TRAY=1
DGDECNV=0
[Paths]
SOURCE_PATH=C:\TEMP\BLU_ENCODES\FATF\
WORKING_PATH=C:\TEMP\BLU_ENCODES\
:confused:

I just loaded all your settings and did a disc that has a VC-1 main track with a VC-1 PiP (with DTS Express audio). It all came out perfectly with 480p.

[Prz]

Thanks, I'll give that a shot and let you know how it turns out. Thanks for your help.

Prz

[busch42]

jdobbs, Just wanted to let you know about the problem I posted in post #15030 about x264.exe has stopped working, Everything is great now, I took your advise in post #15158 about installing CPUID HWMonitor, And the whole time it was my computer overheating, I'm running 42C when idle and 67C to 72C when reincoding, After installing 4 120mm fans I'm running around 63C when reincoding which is still high, So if anybody is having problems with x264 has stopped working check your computer temperture first, Great program jdobbs, time for a donation.

[Audiophile1178]

:confused:

I just loaded all your settings and did a disc that has a VC-1 main track with a VC-1 PiP (with DTS Express audio). It all came out perfectly with 480p.

I know that your post is for k-c-ksum but since i'm having the same problem I'd like to chime in. If that's ok... As noted earlier on the mummy trilogy 1 of the 3 came out fine so I think that it has something to do with the way a particular movie is made. Maybe if you had the same disc as k-c-ksum you could come up with the same problem? Do you have the fast and the furious? I'm assuming that this is the first (original) fast and the furious...

For me, the mummy 3 pip came out as 480p but the mummy 1&2 pip came out as 480i.

BTW, I just looked at the mummy trilogy and the mummy 3 is AVC while 1 & 2 are VC-1 so it looks like there's something going on with the VC-1 PIP encodes which explains why the muumy 3 came out fine.

[Prz]

I just followed the code, and the most probable way you could get that error at that point is if the path to ImgBurn.exe not correctly represented in the system egistry. The registry path is set by ImgBurn during installation.

I would suggest you uninstall ImgBurn and reinstall it.

Right you are JDobbs...the job burned correctly after a delete and reinstall of IMGburn. Thanks for the assist.

[johnnytav]

Hi

I have been using BD Rebuilder for pass year now with excellent results and it would take about 2 Hours to shrink a 30GB or so to 22GB to fit on 25GB BD and now I just d/l version 0.40.10 it wants to take 6 Hours to do it. What Happened? I have all original supporting files on my computer when I first used BD Rebuilder a year ago.
Any idea?

Also is there anyway to use the older version?


JohnnyJT

AMD Phenom II X4 945 3GB Mhz CPU
8GB Memory

[RobertM]

now I just d/l version 0.40.10 it wants to take 6 Hours to do it. What Happened?

Are you sure you are using the same quality setting as before. Go to the "Menu>Settings>Encoder settings" screen and make sure you have selected the same quality level. If you were running "better" before and "highest" now you would see a significantly longer process.

[Yordan5]

Hi

I have been using BD Rebuilder for pass year now with excellent results and it would take about 2 Hours to shrink a 30GB or so to 22GB to fit on 25GB BD and now I just d/l version 0.40.10 it wants to take 6 Hours to do it. What Happened? I have all original supporting files on my computer when I first used BD Rebuilder a year ago.
Any idea?

Also is there anyway to use the older version?


JohnnyJT

AMD Phenom II X4 945 3GB Mhz CPU
8GB Memory

To shrink a 30Gb movie to 22Gb on High Quality setting my PC takes between 3.5 and 5 hours (Core i5 2500K, 6Gb RAM). The Phenom II X4 945 3GB is a slower system and 6 hours sounds about right. Most likely you've been using the Better (Faster) setting as RobertM suggested.

[colinhunt]

jdobbs, could I buy the problem disc, Thin Ice, I mentioned in post 15234 (http://forum.doom9.org/showthread.php?p=1578057#post1578057) for you from Amazon.com? It would be an excellent test disc for you since it causes BD-RB quite a few headaches.

[k-c-ksum]

I know that your post is for k-c-ksum but since i'm having the same problem I'd like to chime in. If that's ok... As noted earlier on the mummy trilogy 1 of the 3 came out fine so I think that it has something to do with the way a particular movie is made. Maybe if you had the same disc as k-c-ksum you could come up with the same problem? Do you have the fast and the furious? I'm assuming that this is the first (original) fast and the furious...

For me, the mummy 3 pip came out as 480p but the mummy 1&2 pip came out as 480i.

BTW, I just looked at the mummy trilogy and the mummy 3 is AVC while 1 & 2 are VC-1 so it looks like there's something going on with the VC-1 PIP encodes which explains why the muumy 3 came out fine.

glad im not the only 1 with the same issue.


Would there be anyway to force secondary video to be encoded as progressive?

[jdobbs]

I know that your post is for k-c-ksum but since i'm having the same problem I'd like to chime in. If that's ok... As noted earlier on the mummy trilogy 1 of the 3 came out fine so I think that it has something to do with the way a particular movie is made. Maybe if you had the same disc as k-c-ksum you could come up with the same problem? Do you have the fast and the furious? I'm assuming that this is the first (original) fast and the furious...

For me, the mummy 3 pip came out as 480p but the mummy 1&2 pip came out as 480i.

BTW, I just looked at the mummy trilogy and the mummy 3 is AVC while 1 & 2 are VC-1 so it looks like there's something going on with the VC-1 PIP encodes which explains why the muumy 3 came out fine.
glad im not the only 1 with the same issue.


Would there be anyway to force secondary video to be encoded as progressive?

As I mentioned earlier, I did numerous tests against VC-1 PiP sources -- and they came out correct (480p), even when I used your (k-c-ksum) settings. I have to believe there is something odd about that particular disc.

I'll look for Mummy-2 and see what I can find.

[johnnytav]

Are you sure you are using the same quality setting as before. Go to the "Menu>Settings>Encoder settings" screen and make sure you have selected the same quality level. If you were running "better" before and "highest" now you would see a significantly longer process.

I checked a few of the older versions .ini files to see setting and adjusted to Auto Quality.

Works as the older versions did.

Keep up the Good Work

Thanks :thanks:

JohnnyJT :cool:

[k-c-ksum]

As I mentioned earlier, I did numerous tests against VC-1 PiP sources -- and they came out correct (480p), even when I used your (k-c-ksum) settings. I have to believe there is something odd about that particular disc.

I'll look for Mummy-2 and see what I can find.

i'll try Pitch Black as thats a vc1 movie/pip disc

[k-c-ksum]

Pitch Black is the same vc1 480p in. avc 480i out :(

[jdobbs]

Pitch Black is the same vc1 480p in. avc 480i out :(

What are you using to check the output? I've done at least 20 discs in testing and they are all 480p. I have another one (Harry Potter 6) going right now.

[jdobbs]

What are you using to check the output? I've done at least 20 discs in testing and they are all 480p. I have another one (Harry Potter 6) going right now.

This one came out 480p also... so I've done lots and lots of discs -- even using your settings -- and they all have correctly reencoded correctly to 480p. I confirm it by opening the output with BD-RB, TSMUXER, and BD-INFO. I don't know what else I can do.

[k-c-ksum]

i open the backup in bdrb and click on secondary tab and it shows its interlaced


it may or may not be happening to others but they arnt aware of it?

is there anyway to force progressive encoding of secondary streams regardless of what its flagged as.? What determins if x264 encodes it as interlaced or progressive?

checked installed software and all is OK


Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.40.0.10, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

[jdobbs]

it may or may not be happening to others but they arnt aware of it? Not likely.. it definitely isn't happening to me, and there have only been two people report it. My guess is that something odd is happening in your instances alone. Right now I don't know what that is.

In order to reencode these as interlaced, a special setting has to be added to the encoding command line. Can you run it again, and while the secondary is being encoded, open LASTCMD.TXT (in the BD-RB installation folder)? Copy and paste the command line here so I can look at it. Also post the contents of the secondary file's AVS. It will look something like this: "VID_00000_2.AVS" -- the "_2" indicates it is a secondary.

[jdobbs]

I've reloaded your settings and I'm trying "Harry Potter 6" again.

[k-c-ksum]

heres the avs

#Created by BD Rebuilder - v0.40.10 (beta)
DirectshowSource("E:\TEMP\BLU_RE-ENCODES\WORKFILES\00037.track_6912.mkv", fps=23.976, framecount=155870, audio=false)
ConvertToYV12().AssumeFPS(24000,1001)

LASTCMD.TXT
"E:\BD_Rebuilder\tools\x264.exe" "E:\TEMP\BLU_RE-ENCODES\WORKFILES\VID_00037_2.AVS" --preset ultrafast --cabac --bframes 3 --b-pyramid none --qpmin=0 --slow-firstpass
--crf 25 --level 3.2 --sar 10:11 --aud --nal-hrd vbr --pic-struct --vbv-bufsize 12000 --keyint 24 --min-keyint 1 --ipratio 1.1 --pbratio 1.1 --vbv-maxrate 7000 --fake-interlaced --
threads auto --thread-input --stats "E:\TEMP\BLU_RE-ENCODES\WORKFILES\VID_00037_2.AVS.264.stats" --pass 1 --output "E:\TEMP\BLU_RE-ENCODES\WORKFILES\VID_00037_2.AVS.264"

[jdobbs]

Thanks. Can you post your log for that job. I've done a couple more encodes since -- and they have also come out correctly. I want to see if it's possible that the "--fake-interlaced" setting is coming from a previous encode and is not being reset for some reason.

[Edit] I think I may have it. It may be possible that if the previously encoded stream was interlaced, and you have deinterlacing set, the "--fake-interlacing" setting gets carried over. None of the discs I've tested seem to match that scenario. I'll do some testing.

[k-c-ksum]

Thanks. Can you post your log for that job. I've done a couple more encodes since -- and they have also come out correctly. I want to see if it's possible that the "--fake-interlaced" setting is coming from a previous encode and is not being reset for some reason.

[Edit] I think I may have it. It may be possible that if the previously encoded stream was interlaced, and you have deinterlacing set, the "--fake-interlacing" setting gets carried over. None of the discs I've tested seem to match that scenario. I'll do some testing.


does the log get saved anywhere? reopened BDRB but log staus is empty. I have Deinterlace ticked. I'll run it again with it unchecked


unchecked deinterlace

"E:\BD_Rebuilder\BD_Rebuilder\BD_Rebuilder\tools\x264.exe" "E:\TEMP\BLU_RE-ENCODES\WORKFILES\VID_00037_2.AVS" --preset ultrafast --cabac --bframes 3
--b-pyramid none --qpmin=0 --slow-firstpass --crf 25 --level 3.2 --sar 10:11 --aud --nal-hrd vbr --pic-struct --vbv-bufsize 12000 --keyint 24 --min-keyint 1 --ipratio 1.1
--pbratio 1.1 --vbv-maxrate 7000 --tff --threads auto --thread-input --stats "E:\TEMP\BLU_RE-ENCODES\WORKFILES\VID_00037_2.AVS.264.stats" --pass 1
--output "E:\TEMP\BLU_RE-ENCODES\WORKFILES\VID_00037_2.AVS.264"



just opened the re-encode VID_00037_2.AVS.264 file in ts muxer and it reports it as interlaced

[jdobbs]

That's consistent with the problem... it isn't really the "deinterlace" setting. It is the fact that the previous encode is interlaced.

The log (BDREBUILDER.LOG) is in the working folder. It's a text file and can be opened with NOTEPAD.

[k-c-ksum]

06/26/12] BD Rebuilder v0.40.10 (beta)
[15:59:07] Source: PITCH_BLACK_G51
- Input BD size: 34.59 GB
- Approximate total content: [02:56:10.475]
- Target BD size: 23.24 GB
- Windows Version: 6.1 [7601]
- Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[15:59:09] PHASE ONE, Encoding
- [15:59:09] Processing: VID_00166 (1 of 9)
- [15:59:09] Extracting A/V streams [VID_00166]
- [15:59:16] Reencoding video [VID_00166]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 1,465 frames
- [15:59:16] Reencoding: VID_00166, Pass 1 of 1
- [16:00:02] Video Encode complete
- [16:00:02] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [16:00:02] Multiplexing M2TS
- [16:00:08] Processing: VID_00203 (2 of 9)
- [16:00:08] Extracting A/V streams [VID_00203]
- [16:00:17] Reencoding video [VID_00203]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 4,370 frames
- [16:00:17] Reencoding: VID_00203, Pass 1 of 1
- [16:00:44] Video Encode complete
- [16:00:44] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [16:00:44] Multiplexing M2TS
- [16:00:49] Processing: VID_00012 (3 of 9)
- [16:00:50] Extracting A/V streams [VID_00012]
- [16:00:59] Reencoding video [VID_00012]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 1,572 frames
- [16:00:59] Reencoding: VID_00012, Pass 1 of 1
- [16:01:54] Video Encode complete
- [16:01:54] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [16:01:54] Multiplexing M2TS
- [16:02:00] Processing: VID_00246 (4 of 9)
- [16:02:00] Extracting A/V streams [VID_00246]
- [16:02:15] Reencoding video [VID_00246]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 7,400 frames
- [16:02:15] Reencoding: VID_00246, Pass 1 of 1
- [16:02:56] Video Encode complete
- [16:02:56] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [16:02:56] Multiplexing M2TS
- [16:03:01] Processing: VID_00169 (5 of 9)
- [16:03:01] Extracting A/V streams [VID_00169]
- [16:03:08] Reencoding video [VID_00169]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 7,200 frames
- [16:03:08] Reencoding: VID_00169, Pass 1 of 1
- [16:05:34] Video Encode complete
- [16:05:34] Processing audio tracks
- [16:05:34] Multiplexing M2TS
- [16:05:41] Processing: VID_00252 (6 of 9)
- [16:05:41] Extracting A/V streams [VID_00252]
- [16:05:47] Reencoding video [VID_00252]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 7,200 frames
- [16:05:48] Reencoding: VID_00252, Pass 1 of 1
- [16:08:15] Video Encode complete
- [16:08:15] Processing audio tracks
- [16:08:16] Multiplexing M2TS
- [16:08:21] Processing: VID_00185 (7 of 9)
- [16:08:21] Extracting A/V streams [VID_00185]
- [16:08:35] Reencoding video [VID_00185]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 8,535 frames
- [16:08:36] Reencoding: VID_00185, Pass 1 of 1
- [16:09:33] Video Encode complete
- [16:09:33] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [16:09:33] Multiplexing M2TS
- [16:09:39] Processing: VID_00188 (8 of 9)
- [16:09:39] Extracting A/V streams [VID_00188]
- [16:10:53] Reencoding video [VID_00188]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 37,125 frames
- [16:10:54] Reencoding: VID_00188, Pass 1 of 1
- [16:15:27] Video Encode complete
- [16:15:27] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [16:15:27] Multiplexing M2TS
- [16:15:47] Processing: VID_00037 (9 of 9)
- [16:15:47] Extracting A/V streams [VID_00037]
- [16:26:38] Reencoding video [VID_00037]
- [16:26:38] Reencoding secondary video [TRK_02]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 155,870 frames
- Bitrate: 23,871 Kbs
- [16:45:42] Reencoding: VID_00037, Pass 1 of 1
[16:56:53]PHASE ONE aborted by user request

[jdobbs]

Thanks. I think I have it now. The "interlaced" setting is being carried over from the previous encode (VID_00188). I was having trouble finding it, because none of my test discs have an interlaced stream immediately preceding the secondary encode. Good find. I'll have it fixed for the next release.

[bbcby]

Selected source is not BD Format
This always occurs (in my case), if the film (time code) does not start from 00:00:00:00

[jdobbs]

This always occurs (in my case), if the film (time code) does not start from 00:00:00:00

That can't be an accurate statement. There are almost no discs that begin with that time code. In fact I don't think I have ever seen one that does. But even with that said, the timecode also has no bearing on that message. That message generally occurs when either the disc directory format is not correct, or one of the MPLS or CLPI files doesn't have the correct header information. In other words, the disc isn't compliant with the BD standard.

[omegaman7]

This always occurs (in my case), if the film (time code) does not start from 00:00:00:00

Selected source not BD format

I had that error every time I'd load files over a network. I no longer employ more than one PC at the moment. So I haven't been able to localize the problem. It probably was the way I was configured.

[meadrocks]

I have Chinatown that Anydvd is giving me a read error on. Typically I use the "Save to HD" Anydvd option & it reads & saves the entire disk to the HD. Is there a way to just read the movie, since all i want is to make a mkv of the movie? Do I have to retain some BD file structure for BD-RB ro read it correctly? Are there other files that I'll need to copy?

[bbcby]

Sorry for my English...
There are almost no discs that begin with that time code.
These discs are very much. For example "Yellow Submarine". Many times come across the opera / ballet (Deutsche Grammophon, Opus Arte).

Here's an example, I do demux Blu-ray with BD Reauthor, open it in the Scenarist BD (5.1.3/5.7) and immediately muxing do not make any changes.
Then open it in BD_Rebuilder and immediately get an error. Selected source is not BD Format.
Can we say that Scenarist does not correct disks?

Then I reset timecode in Scenarist to 00:00:00:00, muxing and open to the BD_Rebuilder... and there is no error.
See Attachments pictures.

[jdobbs]

I have Chinatown that Anydvd is giving me a read error on. Typically I use the "Save to HD" Anydvd option & it reads & saves the entire disk to the HD. Is there a way to just read the movie, since all i want is to make a mkv of the movie? Do I have to retain some BD file structure for BD-RB ro read it correctly? Are there other files that I'll need to copy? You could try copying the largest M2TS to your hard drive and creating a movie-only source using TSMUXER. But if that file is where the read error is (very likely) you'll have the same problem.

[jdobbs]

Sorry for my English...

These discs are very much. For example "Yellow Submarine". Many times come across the opera / ballet (Deutsche Grammophon, Opus Arte).

Here's an example, I do demux Blu-ray with BD Reauthor, open it in the Scenarist BD (5.1.3/5.7) and immediately muxing do not make any changes.
Then open it in BD_Rebuilder and immediately get an error. Selected source is not BD Format.
Can we say that Scenarist does not correct disks?

Then I reset timecode in Scenarist to 00:00:00:00, muxing and open to the BD_Rebuilder... and there is no error.
See Attachments pictures.

Sorry. But that very obviously is a preprocessed source and the error is almost assuredly created during that preprocessing.

One fixed rule of this sub-forum is that I cannot accept bug reports on preprocessed sources. I'd suggest you try encoding against the original source and if you have issues report back.

[bbcby]

OK, I'll try.

[colinhunt]

For example "Yellow Submarine".
Yellow Submarine happens to be another disc affected by the "RencodeAudio() 00075 1801" error. VID_00023 has 6 identical LPCM tracks and once again, the first one gets converted into AC3 but the next one fails.

[jdobbs]

Yellow Submarine happens to be another disc affected by the "RencodeAudio() 00075 1801" error. VID_00023 has 6 identical LPCM tracks and once again, the first one gets converted into AC3 but the next one fails. I have it on order...

[greslogo]

Anybody know the correct playlist for movie only for GHOST_RIDER_VENGEANCE ? I've tried all of them and they all seem to start with some narrative. Help !!!!!

[busch42]

greslogo, I don't mean to be harsh but this forum is for BD Rebuilder bugs, If you open the movie with BD Info you will see 4 movies listed at the top, the 3rd or 4th movie down is the one you want it worked for me, just play the 3rd or 4th file with VLC player and you will know which one.

[Dirk Diggler]

Anybody know the correct playlist for movie only for GHOST_RIDER_VENGEANCE ? I've tried all of them and they all seem to start with some narrative. Help !!!!!

800 or 801 worked for me in Region 1

[Adbear]

Is there any way to increase the speed of encoding when down converting to SD DVD? I don't normally do this, but when I tried it I found it was using less than 15% of my CPU

[Aspagilus]

I know it sais that this forum is for bug reports only, but this has to be said since i consider this thing extremely annoying.
In future versions i would like to see that the forced updates are being removed. You know, when you suddently are prevented from opening the version you currently using and are forced to download a new version.

[Dirk Diggler]

I know it sais that this forum is for bug reports only, but this has to be said since i consider this thing extremely annoying.
In future versions i would like to see that the forced updates are being removed. You know, when you suddently are prevented from opening the version you currently using and are forced to download a new version.

It minimizes bug reports against older version

[Prz]

I've been burning BDR files with Imgburn till yesterday when it began to not burn. Tried another title and reinstalled Imgburn but keep getting "Burn-to-disc was not completed successfully" message on all attempts. Any thoughts on solving this problem?

[Capsbackup]

I've been burning BDR files with Imgburn till yesterday when it began to not burn. Tried another title and reinstalled Imgburn but keep getting "Burn-to-disc was not completed successfully" message on all attempts. Any thoughts on solving this problem?

Since this is not a bug report, you should be posting this elsewhere. ;)
However, could be the burner died or you have bad discs. :(
Can you burn any other type disc, like DVD+RW, BD-RE, etc...

[jdobbs]

I know it sais that this forum is for bug reports only, but this has to be said since i consider this thing extremely annoying.
In future versions i would like to see that the forced updates are being removed. You know, when you suddently are prevented from opening the version you currently using and are forced to download a new version. Ain't gonna' happen until I decide to take it out of beta. I learned my lesson with DVD Rebuilder. People will not upgrade... but continue to report on errors that had been fixed months earlier -- and always forget to mention the version. I'm just not willing to accept that headache.

It takes all of a minute or so to download a new version - if I'm willing to give up thousands of hours to develop this free software, I don't think its unreasonable to expect 60 seconds in return.

[The_Unknown]

I'm having problems with rebuilding Pirates of the Carribean 4 (On Stranger Tides):


[07.07.12] BD Rebuilder v0.40.10 (beta)
[00:31:28] Source: PR41EGE1
- Input BD size: 39,47 GB
- Approximate total content: [02:43:17.453]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[00:31:33] PHASE ONE, Encoding
- [00:31:33] Processing: VID_00125 (1 of 12)
- [00:31:33] Extracting A/V streams [VID_00125]
- [00:46:00] Reencoding video [VID_00125]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 191.081 frames
- Bitrate: 19.207 Kbs
- [00:46:00] Reencoding: VID_00125, Pass 1 of 1
- Encode failed. Aborting.
- BD-Rebuilder v0.40.10 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3326, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[00:46:01] - Failed video encode, aborted


Any idea :(?

[Capsbackup]

I'm having problems with rebuilding Pirates of the Carribean 4 (On Stranger Tides):

Any idea :(?

Uninstall Avisynth, ffdshow and haali. Reboot. Re-install those three programs and try again.
If you have installed any codec packs, remove those too. :cool:

[asiafan]

@jdobb IF i have BD 29GB copied this BD contain only menu & 1 trailer and nothing more after addin this to rebuilder its see only main movie content
so if i will reencode main movie and replace M2ts file in original content [just m2ts file] no clp and others] it will be proper for BD to burn?


earlier u asked me bout reinstalling but looks like not only i have same size problem with this new version of rebuilder after 2 pass compress with mode good/faster its still need to shirnk with very fast 2pass 27GBs.

[jdobbs]

@jdobb IF i have BD 29GB copied this BD contain only menu & 1 trailer and nothing more after addin this to rebuilder its see only main movie content
so if i will reencode main movie and replace M2ts file in original content [just m2ts file] no clp and others] it will be proper for BD to burn?


earlier u asked me bout reinstalling but looks like not only i have same size problem with this new version of rebuilder after 2 pass compress with mode good/faster its still need to shirnk with very fast 2pass 27GBs. You can't just replace an M2TS. There are references in the CLPI and MPLS that would also have to be updated. BD-RB doesn't ""see only main movie content" -- is sees it all (when full backup is selected). It just determined that reencoding the menu and trailer isn't worthwhile (because they are so small), so it only shows the main movie. Your output would be a full backup, including the menu and trailer.

I don't think I understand your second statement.

[The_Unknown]

Uninstall Avisynth, ffdshow and haali. Reboot. Re-install those three programs and try again.
If you have installed any codec packs, remove those too. :cool:

That did the job, thanks ;) I had a quiet old bundle of requirements for BD-RB, it seems.

[asiafan]

You can't just replace an M2TS. There are references in the CLPI and MPLS that would also have to be updated. BD-RB doesn't ""see only main movie content" -- is sees it all (when full backup is selected). It just determined that reencoding the menu and trailer isn't worthwhile (because they are so small), so it only shows the main movie. Your output would be a full backup, including the menu and trailer.

I don't think I understand your second statement.

yes u right i did full job with extras even when Rebuilder didnt see others m2ts but seems its somehow hidden and movie was properly compressed with extras

+

2 movies reencoded also and all is fine 25gb< so can burn again :)

[Audiophile1178]

jdobbs, we've discussed the compression of Star Trek TOS season 2 disc 1 and the amount of compression used. I did a 1080p and burned it to disc and it look perfectly fine on my plasma. Up until recently I haven't been able to watch any episodes off the disc. I came across a pretty big issue on one of the episodes and wanted to watch the other three episodes before I came back here.

Note: I believe that all the episodes use seamless branching. I don't know if it's still called that for the Blu-Ray format but I know it was called that for DVDs.

Problem #1, on the first episode "Amok Time" the audio will cut out (no audio) at ~4min 40sec which is the first angle change. The only way to get it back is to fast forward or reverse (I believe this cuts the bitstream transfer) but once another angle change occurs it'll cut out again. This ONLY happens when I bitstream the DTS HD to my processor. I then changed the setup to have my OPPO (BDP-83) decode it and send an LPCM to the processor and the rest of the episode played fine. After this episode I changed it back to bitstreaming the DTS HD and the rest of the three episodes played back fine. "Amok Time" has PIP and the other episodes don't which may be causing this problem.

Problem #2, Regarding "Amok Time" the PIP has DTS Express for its secondary audio and does playback contrary to our discussion regarding the mummy movies that didn't playback the secondary audio which you stated that a compressed bluray will either playback the secondary audio or not but it's dependent on the bluray player. This doesn't seem to be the case as the secondary audio works (sort of) on this disc. Whether I'm bitstreaming or LPCMing the audio pops A LOT. I don't know if this is causing the bitstreaming issue in problem #1?

Problem #3, I believe that you're supposed to be able to swtich any angle "on the fly" (as long as there's another angle present) as stated on the main menu by pressing the angle button on the remote. This doesn't work and the only way to get it to work is to select the episode without any effects on the pop-up menu or the main menu. By doing this it'll restart the episode from the beginning. The "on the fly" angle change doesn't work for any episodes.


Please note that i'm not in any way being sarcastic in anything that I write here. I'm merely informing you of the problems discovered and relaying back my findings compared to what you told me earlier regarding dts express. I know that dts express was a big headache for you to figure out and you sorta got it working.


As always, THANK YOU FOR MAKING THIS GREAT PROGRAM!!!


P.S. Hopefully, in the next few days I'll be able to do the second disc and watch some of it this weekend so that I can report further findings as it seems like these star trek tos discs are pretty complicated. I'm bringing this up as I'm eagerly anticipating the first season of the next generation and plan to do the same thing except blank half the episodes on each disc to keep the bitrate high. I don't know if TNG is going to be as complex as TOS. I hope not!

[omegaman7]

Indeed. I just preordered TNG season 1. I'm having a heck of a time getting the TOS discs the way I want them. I'm probably just gonna strip the titles one at a time, and then use Multiavchd to reincorporate them. Even then, I may not be happy. I'm picky LOL! Ultimately, perhaps I'll burn double layer backups :S

[A.Fenderson]

Problem disc: Lord of the Rings Extended, Return of the King, feature disc #2 (part two).

Error Condition (popup): "BD Rebuilder experienced an error 2403 [19:29:13] CorrectMPLS() 00006 2403".

This occurs when the rebuild process is practically 100% complete. The first time this happened, I reran BD-RB and chose to continue with the existing project (many times): it always failed at the exact same point (that log is still available upon request). I therefore reripped the disc (via Any DVD-HD, up-to-date, and with no subsequent preprocessing of any kind): this second rip is the one used in the present error report. Upon request of jdobbs I can run checksums of each of the two rips to verify whether they are bit-identical.

The resultant build looks complete from rough eye-balling, and if it's selected as *input* for BD-RB it is accepted as a valid BD source. When burned to BD-RE, though, a quick (not comprehensive) check via chapter skip etc shows that it played fine (menus work, audio & video both good, navigation, etc) with the exception of one 5-minute & 50-second segment that is an easter-egg accessible from the (full) main menu (aka "disc menu") thus: Special Features > (picture of One Ring). In my Panasonic DMP-BD45, selecting this goes briefly to a black screen then returns to the menu. In Cyberlink Power DVD 8, I instead get a completely black, no-audio segment of the proper length (5min 50s) followed by a return to the menu. I have verified that the stream in question is on the disc and plays perfectly when opened in Media Player Classic Home Theater and/or VLC: it is an SD-resolution clip that is originally in MPEG-2 480i, and after reeencode is AVC 480p29.97, which seems to be an invalid format for a primary video stream according to info found in this thread (http://forum.doom9.org/showthread.php?t=154533). Note that "Use DEINTERLACER on interlaced sources" was chosen in the setup menu, and I believe it's the default option: in this case it was applied despite the fact that it seems to have brought the resultant clip out of BD-compliant format for a primary video stream.

BD-REBUILDER.LOG:

----------------------
[07/06/12] BD Rebuilder v0.40.10 (beta)
[12:17:04] Source: THE_RETURN_OF_THE_KING_EXT_PT2
- Input BD size: 37.27 GB
- Approximate total content: [02:24:11.117]
- Target BD size: 22.95 GB
- Windows Version: 5.1 [2600]
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[12:17:04] PHASE ONE, Encoding
- [12:17:04] Processing: VID_00007 (1 of 2)
- [12:17:04] Extracting A/V streams [VID_00007]
- [12:17:14] Reencoding video [VID_00007]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 10,503 frames
- Bitrate: 2,352 Kbs
- [12:17:14] Reencoding: VID_00007, Pass 1 of 2
- [12:19:57] Reencoding: VID_00007, Pass 2 of 2
- [12:29:49] Video Encode complete
- [12:29:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [12:29:49] Multiplexing M2TS
- [12:29:55] Processing: VID_00008 (2 of 2)
- [12:29:55] Extracting A/V streams [VID_00008]
- [12:38:28] Reencoding video [VID_00008]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 195,056 frames
- Bitrate: 19,688 Kbs
- [12:38:28] Reencoding: VID_00008, Pass 1 of 2
- [17:38:03] Reencoding: VID_00008, Pass 2 of 2
- [19:05:41] Video Encode complete
- [19:05:41] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4355 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- [19:05:41] Multiplexing M2TS
[19:29:05]PHASE ONE complete
[19:29:05]PHASE TWO - Rebuild Started
- [19:29:05] Rebuilding BD file Structure
- [19:29:13] CorrectMPLS() 00006 2403
[03:48:50] - Aborted at user request


Note that I never clicked the Abort button, simply the OK button on the pop-up error message.

THE_RETURN_OF_THE_KING_EXT_PT2.INF:
[Status]
LABEL=THE_RETURN_OF_THE_KING_EXT_PT2
VERSION=v0.40.10 (beta)
SOURCE_SIZE=40020441711
SOURCE_VIDEO_SIZE=39798835200
TARGET_SIZE=24641536000
REDUCTION=.613584024916388
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=eng;
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=2
REBUILD_COMPLETE=0
[00007]
AUDIO=1
PGS=100
SCAN=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=121902201
RATE=2352
SPLITS=1
NSTART=27000000
NEND=42769440
NSIZE=121878528
FLINK=0
MLINK=0
[00008]
AUDIO=101111
PGS=10011110
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=24298027288
RATE=19688
SPLITS=1
NSTART=27000000
NEND=393144480
NSIZE=23746486272
FLINK=0
MLINK=0

Inspect.exe results:

- Windows Version: 5.1 [2600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.11.96.14], Ok
- FFDSHOW: [3882], Ok
- FFDSHOW VC-1 set "disabled", WMP11, Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.40.0.10, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

Thanks for your time. :)

edit:

@Audiophile1178: if I recall correctly, even playing from the original discs, the seamless branching feature in ST:TOS to allow switching between the original and updated effects doesn't actually work as intended (or at least as I imagined it should)--I believe I had to make the change in the pop-up menu and then restart the chapter for it ever to work properly.

[asiafan]

now i gotta q to you all which BD player u are using when talk bout Samsung which of samsung player will be playing *.m2ts and *.ts files i got BDP 3600 [doesnt matter region] this player is from 2009 and got problems with 50GB disc when u reach layer change and 25 reencoded [freezing disc need pause and play] when LG dont have any of this crappy issues and play all perfect.

[AmigaFuture]

Hello,

"The Incredibles" is missing/silent 1st audio for movie and "Boundin'" extra. The Commentary for "Boundin'" does play. Everything else is functioning. I selected Full Backup.
I've tried with PowerDVD 12 and my LG BD590.

BD-REBUILDER.LOG
[07/10/12] BD Rebuilder v0.40.10 (beta)
[18:52:42] Source: INCREDIBLES
- Input BD size: 40.25 GB
- Approximate total content: [03:27:54.752]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- Quality: Good (Very Fast), Two Pass
- Decoding/Frame serving: DirectShow [4-way]
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[18:52:44] PHASE ONE, Encoding
- [18:52:44] Processing: VID_00451 (1 of 59)
- [18:52:44] Extracting A/V streams [VID_00451]
- [18:52:51] Reencoding video [VID_00451]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 23.976fps, 7,200 frames
- Bitrate: 3,572 Kbs
- [18:52:51] Reencoding: VID_00451, Pass 1 of 2
- [18:53:32] Reencoding: VID_00451, Pass 2 of 2
- [18:54:15] Video Encode complete
- [18:54:15] Processing audio tracks
- [18:54:15] Multiplexing M2TS
- [18:54:20] Processing: VID_00470 (2 of 59)
- [18:54:20] Extracting A/V streams [VID_00470]
- [18:54:26] Reencoding video [VID_00470]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 613 frames
- Bitrate: 20,107 Kbs
- [18:54:26] Reencoding: VID_00470, Pass 1 of 2
- [18:54:34] Reencoding: VID_00470, Pass 2 of 2
- [18:54:42] Video Encode complete
- [18:54:42] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [18:54:45] Multiplexing M2TS
- [18:54:49] Processing: VID_00471 (3 of 59)
- [18:54:49] Extracting A/V streams [VID_00471]
- [18:54:56] Reencoding video [VID_00471]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 918 frames
- Bitrate: 15,001 Kbs
- [18:54:56] Reencoding: VID_00471, Pass 1 of 2
- [18:55:06] Reencoding: VID_00471, Pass 2 of 2
- [18:55:16] Video Encode complete
- [18:55:16] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [18:55:19] Multiplexing M2TS
- [18:55:24] Processing: VID_00472 (4 of 59)
- [18:55:24] Extracting A/V streams [VID_00472]
- [18:55:43] Reencoding video [VID_00472]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5,794 frames
- Bitrate: 16,041 Kbs
- [18:55:43] Reencoding: VID_00472, Pass 1 of 2
- [18:56:52] Reencoding: VID_00472, Pass 2 of 2
- [18:58:01] Video Encode complete
- [18:58:01] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [18:58:05] Multiplexing M2TS
- [18:58:19] Processing: VID_00473 (5 of 59)
- [18:58:19] Extracting A/V streams [VID_00473]
- [18:58:32] Reencoding video [VID_00473]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,720 frames
- Bitrate: 15,768 Kbs
- [18:58:32] Reencoding: VID_00473, Pass 1 of 2
- [18:59:17] Reencoding: VID_00473, Pass 2 of 2
- [19:00:02] Video Encode complete
- [19:00:02] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [19:00:06] Multiplexing M2TS
- [19:00:16] Processing: VID_00474 (6 of 59)
- [19:00:16] Extracting A/V streams [VID_00474]
- [19:00:49] Reencoding video [VID_00474]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 10,885 frames
- Bitrate: 14,606 Kbs
- [19:00:49] Reencoding: VID_00474, Pass 1 of 2
- [19:02:51] Reencoding: VID_00474, Pass 2 of 2
- [19:04:54] Video Encode complete
- [19:04:54] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [19:05:00] Multiplexing M2TS
- [19:05:20] Processing: VID_00475 (7 of 59)
- [19:05:20] Extracting A/V streams [VID_00475]
- [19:06:03] Reencoding video [VID_00475]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 16,124 frames
- Bitrate: 15,671 Kbs
- [19:06:03] Reencoding: VID_00475, Pass 1 of 2
- [19:09:10] Reencoding: VID_00475, Pass 2 of 2
- [19:12:22] Video Encode complete
- [19:12:22] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [19:12:29] Multiplexing M2TS
- [19:12:59] Processing: VID_00476 (8 of 59)
- [19:12:59] Extracting A/V streams [VID_00476]
- [19:13:56] Reencoding video [VID_00476]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 18,414 frames
- Bitrate: 15,694 Kbs
- [19:13:56] Reencoding: VID_00476, Pass 1 of 2
- [19:17:34] Reencoding: VID_00476, Pass 2 of 2
- [19:21:14] Video Encode complete
- [19:21:14] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [19:21:21] Multiplexing M2TS
- [19:21:55] Processing: VID_00477 (9 of 59)
- [19:21:55] Extracting A/V streams [VID_00477]
- [19:22:56] Reencoding video [VID_00477]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 19,817 frames
- Bitrate: 15,928 Kbs
- [19:22:56] Reencoding: VID_00477, Pass 1 of 2
- [19:26:50] Reencoding: VID_00477, Pass 2 of 2
- [19:30:48] Video Encode complete
- [19:30:48] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [19:30:56] Multiplexing M2TS
- [19:31:32] Processing: VID_00478 (10 of 59)
- [19:31:32] Extracting A/V streams [VID_00478]
- [19:31:36] Reencoding video [VID_00478]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 316 frames
- Bitrate: 21,135 Kbs
- [19:31:36] Reencoding: VID_00478, Pass 1 of 2
- [19:31:41] Reencoding: VID_00478, Pass 2 of 2
- [19:31:46] Video Encode complete
- [19:31:46] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [19:31:48] Multiplexing M2TS
- [19:31:52] Processing: VID_00479 (11 of 59)
- [19:31:52] Extracting A/V streams [VID_00479]
- [19:32:22] Reencoding video [VID_00479]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 9,194 frames
- Bitrate: 15,479 Kbs

[AmigaFuture]

- [19:32:22] Reencoding: VID_00479, Pass 1 of 2
- [19:34:12] Reencoding: VID_00479, Pass 2 of 2
- [19:36:03] Video Encode complete
- [19:36:03] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [19:36:08] Multiplexing M2TS
- [19:36:26] Processing: VID_00480 (12 of 59)
- [19:36:26] Extracting A/V streams [VID_00480]
- [19:39:40] Reencoding video [VID_00480]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 52,583 frames
- Bitrate: 16,557 Kbs
- [19:39:40] Reencoding: VID_00480, Pass 1 of 2
- [19:50:35] Reencoding: VID_00480, Pass 2 of 2
- [20:01:39] Video Encode complete
- [20:01:40] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:01:58] Multiplexing M2TS
- [20:03:31] Processing: VID_00481 (13 of 59)
- [20:03:31] Extracting A/V streams [VID_00481]
- [20:03:40] Reencoding video [VID_00481]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,145 frames
- Bitrate: 16,142 Kbs
- [20:03:40] Reencoding: VID_00481, Pass 1 of 2
- [20:04:07] Reencoding: VID_00481, Pass 2 of 2
- [20:04:34] Video Encode complete
- [20:04:34] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:04:37] Multiplexing M2TS
- [20:04:44] Processing: VID_00482 (14 of 59)
- [20:04:44] Extracting A/V streams [VID_00482]
- [20:05:13] Reencoding video [VID_00482]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 10,969 frames
- Bitrate: 14,530 Kbs
- [20:05:13] Reencoding: VID_00482, Pass 1 of 2
- [20:07:06] Reencoding: VID_00482, Pass 2 of 2
- [20:09:01] Video Encode complete
- [20:09:01] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:09:14] Multiplexing M2TS
- [20:09:34] Processing: VID_00483 (15 of 59)
- [20:09:34] Extracting A/V streams [VID_00483]
- [20:09:41] Reencoding video [VID_00483]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,407 frames
- Bitrate: 14,908 Kbs
- [20:09:41] Reencoding: VID_00483, Pass 1 of 2
- [20:09:57] Reencoding: VID_00483, Pass 2 of 2
- [20:10:13] Video Encode complete
- [20:10:13] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:10:16] Multiplexing M2TS
- [20:10:21] Processing: VID_00484 (16 of 59)
- [20:10:21] Extracting A/V streams [VID_00484]
- [20:10:29] Reencoding video [VID_00484]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,174 frames
- Bitrate: 15,736 Kbs
- [20:10:29] Reencoding: VID_00484, Pass 1 of 2
- [20:10:44] Reencoding: VID_00484, Pass 2 of 2
- [20:10:58] Video Encode complete
- [20:10:58] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:11:02] Multiplexing M2TS
- [20:11:07] Processing: VID_00485 (17 of 59)
- [20:11:07] Extracting A/V streams [VID_00485]
- [20:11:14] Reencoding video [VID_00485]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,020 frames
- Bitrate: 15,340 Kbs
- [20:11:14] Reencoding: VID_00485, Pass 1 of 2
- [20:11:26] Reencoding: VID_00485, Pass 2 of 2
- [20:11:38] Video Encode complete
- [20:11:38] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:11:42] Multiplexing M2TS
- [20:11:47] Processing: VID_00486 (18 of 59)
- [20:11:47] Extracting A/V streams [VID_00486]
- [20:11:57] Reencoding video [VID_00486]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,232 frames
- Bitrate: 19,754 Kbs
- [20:11:57] Reencoding: VID_00486, Pass 1 of 2
- [20:12:29] Reencoding: VID_00486, Pass 2 of 2
- [20:13:00] Video Encode complete
- [20:13:00] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:13:03] Multiplexing M2TS
- [20:13:11] Processing: VID_00487 (19 of 59)
- [20:13:11] Extracting A/V streams [VID_00487]
- [20:13:17] Reencoding video [VID_00487]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 735 frames
- Bitrate: 15,365 Kbs
- [20:13:17] Reencoding: VID_00487, Pass 1 of 2
- [20:13:26] Reencoding: VID_00487, Pass 2 of 2
- [20:13:35] Video Encode complete
- [20:13:35] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:13:38] Multiplexing M2TS
- [20:13:43] Processing: VID_00488 (20 of 59)
- [20:13:43] Extracting A/V streams [VID_00488]
- [20:13:55] Reencoding video [VID_00488]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,863 frames
- Bitrate: 14,736 Kbs
- [20:13:55] Reencoding: VID_00488, Pass 1 of 2
- [20:14:41] Reencoding: VID_00488, Pass 2 of 2
- [20:15:27] Video Encode complete
- [20:15:27] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:15:31] Multiplexing M2TS
- [20:15:40] Processing: VID_00489 (21 of 59)
- [20:15:40] Extracting A/V streams [VID_00489]
- [20:15:47] Reencoding video [VID_00489]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 999 frames
- Bitrate: 14,869 Kbs
- [20:15:47] Reencoding: VID_00489, Pass 1 of 2
- [20:15:59] Reencoding: VID_00489, Pass 2 of 2
- [20:16:11] Video Encode complete
- [20:16:11] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:16:13] Multiplexing M2TS
- [20:16:19] Processing: VID_00490 (22 of 59)
- [20:16:19] Extracting A/V streams [VID_00490]
- [20:16:24] Reencoding video [VID_00490]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 622 frames
- Bitrate: 15,617 Kbs
- [20:16:24] Reencoding: VID_00490, Pass 1 of 2
- [20:16:31] Reencoding: VID_00490, Pass 2 of 2
- [20:16:38] Video Encode complete
- [20:16:38] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:16:40] Multiplexing M2TS
- [20:16:45] Processing: VID_00491 (23 of 59)
- [20:16:45] Extracting A/V streams [VID_00491]
- [20:16:50] Reencoding video [VID_00491]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 782 frames
- Bitrate: 15,778 Kbs
- [20:16:50] Reencoding: VID_00491, Pass 1 of 2
- [20:16:59] Reencoding: VID_00491, Pass 2 of 2
- [20:17:08] Video Encode complete
- [20:17:08] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:17:11] Multiplexing M2TS
- [20:17:16] Processing: VID_00492 (24 of 59)
- [20:17:16] Extracting A/V streams [VID_00492]
- [20:17:22] Reencoding video [VID_00492]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 671 frames
- Bitrate: 17,953 Kbs
- [20:17:22] Reencoding: VID_00492, Pass 1 of 2
- [20:17:31] Reencoding: VID_00492, Pass 2 of 2
- [20:17:40] Video Encode complete
- [20:17:40] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:17:43] Multiplexing M2TS
- [20:17:47] Processing: VID_00493 (25 of 59)
- [20:17:47] Extracting A/V streams [VID_00493]
- [20:17:53] Reencoding video [VID_00493]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 698 frames
- Bitrate: 16,018 Kbs
- [20:17:53] Reencoding: VID_00493, Pass 1 of 2
- [20:18:03] Reencoding: VID_00493, Pass 2 of 2
- [20:18:12] Video Encode complete
- [20:18:12] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:18:14] Multiplexing M2TS
- [20:18:19] Processing: VID_00494 (26 of 59)
- [20:18:19] Extracting A/V streams [VID_00494]
- [20:18:24] Reencoding video [VID_00494]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 359 frames
- Bitrate: 20,554 Kbs
- [20:18:24] Reencoding: VID_00494, Pass 1 of 2
- [20:18:29] Reencoding: VID_00494, Pass 2 of 2
- [20:18:34] Video Encode complete
- [20:18:34] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:18:36] Multiplexing M2TS
- [20:18:41] Processing: VID_00497 (27 of 59)
- [20:18:41] Extracting A/V streams [VID_00497]
- [20:19:02] Reencoding video [VID_00497]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 6,823 frames
- Bitrate: 13,465 Kbs
- [20:19:02] Reencoding: VID_00497, Pass 1 of 2
- [20:20:34] Reencoding: VID_00497, Pass 2 of 2
- [20:22:07] Video Encode complete
- [20:22:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [20:22:07] Multiplexing M2TS
- [20:22:19] Processing: VID_00501 (28 of 59)
- [20:22:19] Extracting A/V streams [VID_00501]
- [20:22:25] Reencoding video [VID_00501]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,040 frames
- Bitrate: 15,506 Kbs
- [20:22:25] Reencoding: VID_00501, Pass 1 of 2
- [20:22:39] Reencoding: VID_00501, Pass 2 of 2
- [20:22:53] Video Encode complete
- [20:22:53] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- [20:22:56] Multiplexing M2TS
- [20:23:01] Processing: VID_00502 (29 of 59)
- [20:23:01] Extracting A/V streams [VID_00502]
- [20:23:16] Reencoding video [VID_00502]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5,113 frames
- Bitrate: 15,659 Kbs
- [20:23:16] Reencoding: VID_00502, Pass 1 of 2
- [20:24:21] Reencoding: VID_00502, Pass 2 of 2
- [20:25:27] Video Encode complete
- [20:25:27] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- [20:25:32] Multiplexing M2TS
- [20:25:43] Processing: VID_00503 (30 of 59)
- [20:25:43] Extracting A/V streams [VID_00503]
- [20:25:47] Reencoding video [VID_00503]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 264 frames
- Bitrate: 16,673 Kbs

[AmigaFuture]

- [20:25:47] Reencoding: VID_00503, Pass 1 of 2
- [20:25:51] Reencoding: VID_00503, Pass 2 of 2
- [20:25:54] Video Encode complete
- [20:25:54] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- [20:25:57] Multiplexing M2TS
- [20:26:01] Processing: VID_00504 (31 of 59)
- [20:26:01] Extracting A/V streams [VID_00504]
- [20:26:05] Reencoding video [VID_00504]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 363 frames
- Bitrate: 13,933 Kbs
- [20:26:05] Reencoding: VID_00504, Pass 1 of 2
- [20:26:11] Reencoding: VID_00504, Pass 2 of 2
- [20:26:15] Video Encode complete
- [20:26:15] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- [20:26:16] Multiplexing M2TS
- [20:26:21] Processing: VID_00505 (32 of 59)
- [20:26:21] Extracting A/V streams [VID_00505]
- [20:26:28] Reencoding video [VID_00505]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,040 frames
- Bitrate: 15,508 Kbs
- [20:26:28] Reencoding: VID_00505, Pass 1 of 2
- [20:26:42] Reencoding: VID_00505, Pass 2 of 2
- [20:26:56] Video Encode complete
- [20:26:56] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- [20:26:59] Multiplexing M2TS
- [20:27:04] Processing: VID_00506 (33 of 59)
- [20:27:04] Extracting A/V streams [VID_00506]
- [20:27:08] Reencoding video [VID_00506]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 264 frames
- Bitrate: 15,279 Kbs
- [20:27:08] Reencoding: VID_00506, Pass 1 of 2
- [20:27:11] Reencoding: VID_00506, Pass 2 of 2
- [20:27:15] Video Encode complete
- [20:27:15] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- [20:27:17] Multiplexing M2TS
- [20:27:21] Processing: VID_00508 (34 of 59)
- [20:27:21] Extracting A/V streams [VID_00508]
- [20:27:28] Reencoding video [VID_00508]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,040 frames
- Bitrate: 15,513 Kbs
- [20:27:28] Reencoding: VID_00508, Pass 1 of 2
- [20:27:42] Reencoding: VID_00508, Pass 2 of 2
- [20:27:56] Video Encode complete
- [20:27:56] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- [20:27:58] Multiplexing M2TS
- [20:28:04] Processing: VID_00509 (35 of 59)
- [20:28:04] Extracting A/V streams [VID_00509]
- [20:28:30] Reencoding video [VID_00509]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 6,820 frames
- Bitrate: 19,006 Kbs
- [20:28:30] Reencoding: VID_00509, Pass 1 of 2
- [20:30:06] Reencoding: VID_00509, Pass 2 of 2
- [20:31:43] Video Encode complete
- [20:31:43] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [20:31:43] Multiplexing M2TS
- [20:31:58] Processing: VID_00510 (36 of 59)
- [20:31:58] Extracting A/V streams [VID_00510]
- [20:33:14] Reencoding video [VID_00510]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 31,865 frames
- Bitrate: 12,696 Kbs
- [20:33:14] Reencoding: VID_00510, Pass 1 of 2
- [20:41:51] Reencoding: VID_00510, Pass 2 of 2
- [20:49:13] Video Encode complete
- [20:49:13] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [20:49:13] Multiplexing M2TS
- [20:49:51] Processing: VID_00511 (37 of 59)
- [20:49:51] Extracting A/V streams [VID_00511]
- [20:49:58] Reencoding video [VID_00511]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,407 frames
- Bitrate: 14,967 Kbs
- [20:49:58] Reencoding: VID_00511, Pass 1 of 2
- [20:50:13] Reencoding: VID_00511, Pass 2 of 2
- [20:50:29] Video Encode complete
- [20:50:29] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:50:32] Multiplexing M2TS
- [20:50:38] Processing: VID_00512 (38 of 59)
- [20:50:38] Extracting A/V streams [VID_00512]
- [20:50:44] Reencoding video [VID_00512]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,174 frames
- Bitrate: 15,789 Kbs
- [20:50:44] Reencoding: VID_00512, Pass 1 of 2
- [20:50:59] Reencoding: VID_00512, Pass 2 of 2
- [20:51:14] Video Encode complete
- [20:51:14] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:51:17] Multiplexing M2TS
- [20:51:22] Processing: VID_00513 (39 of 59)
- [20:51:22] Extracting A/V streams [VID_00513]
- [20:51:29] Reencoding video [VID_00513]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,020 frames
- Bitrate: 15,339 Kbs
- [20:51:29] Reencoding: VID_00513, Pass 1 of 2
- [20:51:41] Reencoding: VID_00513, Pass 2 of 2
- [20:51:53] Video Encode complete
- [20:51:53] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:51:56] Multiplexing M2TS
- [20:52:01] Processing: VID_00514 (40 of 59)
- [20:52:01] Extracting A/V streams [VID_00514]
- [20:52:11] Reencoding video [VID_00514]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,232 frames
- Bitrate: 19,735 Kbs
- [20:52:11] Reencoding: VID_00514, Pass 1 of 2
- [20:52:43] Reencoding: VID_00514, Pass 2 of 2
- [20:53:14] Video Encode complete
- [20:53:15] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:53:18] Multiplexing M2TS
- [20:53:26] Processing: VID_00515 (41 of 59)
- [20:53:27] Extracting A/V streams [VID_00515]
- [20:53:32] Reencoding video [VID_00515]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 735 frames
- Bitrate: 15,341 Kbs
- [20:53:32] Reencoding: VID_00515, Pass 1 of 2
- [20:53:42] Reencoding: VID_00515, Pass 2 of 2
- [20:53:51] Video Encode complete
- [20:53:51] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:53:53] Multiplexing M2TS
- [20:53:58] Processing: VID_00516 (42 of 59)
- [20:53:58] Extracting A/V streams [VID_00516]
- [20:54:11] Reencoding video [VID_00516]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,863 frames
- Bitrate: 14,621 Kbs
- [20:54:11] Reencoding: VID_00516, Pass 1 of 2
- [20:54:56] Reencoding: VID_00516, Pass 2 of 2
- [20:55:43] Video Encode complete
- [20:55:43] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:55:47] Multiplexing M2TS
- [20:55:56] Processing: VID_00517 (43 of 59)
- [20:55:56] Extracting A/V streams [VID_00517]
- [20:56:03] Reencoding video [VID_00517]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 999 frames
- Bitrate: 14,843 Kbs
- [20:56:03] Reencoding: VID_00517, Pass 1 of 2
- [20:56:15] Reencoding: VID_00517, Pass 2 of 2
- [20:56:27] Video Encode complete
- [20:56:27] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:56:30] Multiplexing M2TS
- [20:56:35] Processing: VID_00518 (44 of 59)
- [20:56:35] Extracting A/V streams [VID_00518]
- [20:56:41] Reencoding video [VID_00518]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 622 frames
- Bitrate: 15,621 Kbs
- [20:56:41] Reencoding: VID_00518, Pass 1 of 2
- [20:56:48] Reencoding: VID_00518, Pass 2 of 2
- [20:56:55] Video Encode complete
- [20:56:55] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:56:58] Multiplexing M2TS
- [20:57:02] Processing: VID_00519 (45 of 59)
- [20:57:02] Extracting A/V streams [VID_00519]
- [20:57:07] Reencoding video [VID_00519]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 782 frames
- Bitrate: 15,777 Kbs
- [20:57:07] Reencoding: VID_00519, Pass 1 of 2
- [20:57:16] Reencoding: VID_00519, Pass 2 of 2
- [20:57:25] Video Encode complete
- [20:57:25] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:57:28] Multiplexing M2TS
- [20:57:33] Processing: VID_00520 (46 of 59)
- [20:57:33] Extracting A/V streams [VID_00520]
- [20:57:38] Reencoding video [VID_00520]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 671 frames
- Bitrate: 16,004 Kbs
- [20:57:38] Reencoding: VID_00520, Pass 1 of 2
- [20:57:47] Reencoding: VID_00520, Pass 2 of 2
- [20:57:56] Video Encode complete
- [20:57:56] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:57:59] Multiplexing M2TS
- [20:58:03] Processing: VID_00521 (47 of 59)
- [20:58:03] Extracting A/V streams [VID_00521]
- [20:58:08] Reencoding video [VID_00521]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 698 frames
- Bitrate: 15,319 Kbs
- [20:58:08] Reencoding: VID_00521, Pass 1 of 2
- [20:58:18] Reencoding: VID_00521, Pass 2 of 2
- [20:58:27] Video Encode complete
- [20:58:27] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:58:29] Multiplexing M2TS
- [20:58:34] Processing: VID_00522 (48 of 59)
- [20:58:34] Extracting A/V streams [VID_00522]
- [20:58:39] Reencoding video [VID_00522]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 359 frames
- Bitrate: 20,600 Kbs
- [20:58:39] Reencoding: VID_00522, Pass 1 of 2
- [20:58:44] Reencoding: VID_00522, Pass 2 of 2
- [20:58:49] Video Encode complete
- [20:58:49] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:58:51] Multiplexing M2TS
- [20:58:55] Processing: VID_00523 (49 of 59)
- [20:58:55] Extracting A/V streams [VID_00523]
- [20:59:02] Reencoding video [VID_00523]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,407 frames
- Bitrate: 14,902 Kbs
- [20:59:02] Reencoding: VID_00523, Pass 1 of 2
- [20:59:18] Reencoding: VID_00523, Pass 2 of 2
- [20:59:33] Video Encode complete
- [20:59:33] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [20:59:36] Multiplexing M2TS
- [20:59:42] Processing: VID_00524 (50 of 59)
- [20:59:42] Extracting A/V streams [VID_00524]
- [20:59:48] Reencoding video [VID_00524]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,174 frames
- Bitrate: 15,795 Kbs
- [20:59:48] Reencoding: VID_00524, Pass 1 of 2
- [21:00:03] Reencoding: VID_00524, Pass 2 of 2
- [21:00:18] Video Encode complete
- [21:00:18] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [21:00:21] Multiplexing M2TS
- [21:00:27] Processing: VID_00525 (51 of 59)
- [21:00:27] Extracting A/V streams [VID_00525]
- [21:00:34] Reencoding video [VID_00525]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,020 frames
- Bitrate: 15,340 Kbs
- [21:00:34] Reencoding: VID_00525, Pass 1 of 2
- [21:00:46] Reencoding: VID_00525, Pass 2 of 2
- [21:00:58] Video Encode complete
- [21:00:58] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [21:01:01] Multiplexing M2TS
- [21:01:06] Processing: VID_00526 (52 of 59)
- [21:01:06] Extracting A/V streams [VID_00526]
- [21:01:16] Reencoding video [VID_00526]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,232 frames
- Bitrate: 19,761 Kbs
- [21:01:17] Reencoding: VID_00526, Pass 1 of 2
- [21:01:49] Reencoding: VID_00526, Pass 2 of 2
- [21:02:20] Video Encode complete
- [21:02:20] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [21:02:24] Multiplexing M2TS
- [21:02:32] Processing: VID_00527 (53 of 59)
- [21:02:32] Extracting A/V streams [VID_00527]
- [21:02:37] Reencoding video [VID_00527]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 735 frames
- Bitrate: 15,345 Kbs

[AmigaFuture]

- [21:02:37] Reencoding: VID_00527, Pass 1 of 2
- [21:02:46] Reencoding: VID_00527, Pass 2 of 2
- [21:02:55] Video Encode complete
- [21:02:55] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [21:02:58] Multiplexing M2TS
- [21:03:03] Processing: VID_00528 (54 of 59)
- [21:03:03] Extracting A/V streams [VID_00528]
- [21:03:09] Reencoding video [VID_00528]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 782 frames
- Bitrate: 15,786 Kbs
- [21:03:09] Reencoding: VID_00528, Pass 1 of 2
- [21:03:18] Reencoding: VID_00528, Pass 2 of 2
- [21:03:26] Video Encode complete
- [21:03:26] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [21:03:29] Multiplexing M2TS
- [21:03:34] Processing: VID_00529 (55 of 59)
- [21:03:34] Extracting A/V streams [VID_00529]
- [21:03:40] Reencoding video [VID_00529]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 698 frames
- Bitrate: 15,307 Kbs
- [21:03:40] Reencoding: VID_00529, Pass 1 of 2
- [21:03:49] Reencoding: VID_00529, Pass 2 of 2
- [21:03:58] Video Encode complete
- [21:03:58] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [21:04:00] Multiplexing M2TS
- [21:04:05] Processing: VID_00530 (56 of 59)
- [21:04:05] Extracting A/V streams [VID_00530]
- [21:04:10] Reencoding video [VID_00530]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 359 frames
- Bitrate: 20,593 Kbs
- [21:04:10] Reencoding: VID_00530, Pass 1 of 2
- [21:04:15] Reencoding: VID_00530, Pass 2 of 2
- [21:04:20] Video Encode complete
- [21:04:20] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4359 (eng): Keeping original audio
- Track 4360 (eng): Keeping original audio
- [21:04:22] Multiplexing M2TS
- [21:04:27] Blanking: VID_00532 (57 of 59)
- [21:04:27] Blanking: VID_00543 (58 of 59)
- [21:04:27] Blanking: VID_00545 (59 of 59)
[21:04:27]PHASE ONE complete
[21:04:27]PHASE TWO - Rebuild Started
- [21:04:27] Rebuilding BD file Structure
[21:04:43] - Encode and Rebuild complete
[21:04:43] JOB: INCREDIBLES finished.


INCREDIBLES.INF
[Status]
LABEL=INCREDIBLES
VERSION=v0.40.10 (beta)
SOURCE_SIZE=43213623797
SOURCE_VIDEO_SIZE=42366523392
TARGET_SIZE=24641536000
REDUCTION=.561632951914413
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=eng;
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=4
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=56
REBUILD_COMPLETE=1
[00451]
AUDIO=
PGS=
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=144234675
RATE=3572
SPLITS=1
NSTART=27000000
NEND=40511623
NSIZE=77672448
FLINK=0
MLINK=0
[00470]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=76194307
RATE=20107
SPLITS=1
NSTART=27000000
NEND=28149120
NSIZE=70041600
FLINK=-1
MLINK=0
[00471]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=88996304
RATE=15001
SPLITS=1
NSTART=27000000
NEND=28722240
NSIZE=80603136
FLINK=-1
MLINK=0
[00472]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=589623372
RATE=16041
SPLITS=1
NSTART=27000000
NEND=37873440
NSIZE=539811840
FLINK=-1
MLINK=0
[00473]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=373914911
RATE=15768
SPLITS=1
NSTART=27000000
NEND=33981120
NSIZE=341680128
FLINK=-1
MLINK=0
[00474]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=1020339809
RATE=14606
SPLITS=1
NSTART=27000000
NEND=47429280
NSIZE=932696064
FLINK=-1
MLINK=0
[00475]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=1610853455
RATE=15671
SPLITS=1
NSTART=27000000
NEND=57261600
NSIZE=1472833536
FLINK=-1
MLINK=0
[00476]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=1840592352
RATE=15694
SPLITS=1
NSTART=27000000
NEND=61560000
NSIZE=1682921472
FLINK=-1
MLINK=0
[00477]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=2002632499
RATE=15928
SPLITS=1
NSTART=27000000
NEND=64193760
NSIZE=1831428096
FLINK=-1
MLINK=0
[00478]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=41125119
RATE=21135
SPLITS=1
NSTART=27000000
NEND=27591840
NSIZE=37453824
FLINK=-1
MLINK=0
[00479]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=909293706
RATE=15479
SPLITS=1
NSTART=27000000
NEND=44255520
NSIZE=830724096
FLINK=-1
MLINK=0
[00480]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=5504230386
RATE=16557
SPLITS=1
NSTART=27000000
NEND=125690400
NSIZE=5037527040
FLINK=-1
MLINK=0
[00481]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=219321316
RATE=16142
SPLITS=1
NSTART=27000000
NEND=31024800
NSIZE=199882752
FLINK=-1
MLINK=0
[00482]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=1020343260
RATE=14530
SPLITS=1
NSTART=27000000
NEND=47587680
NSIZE=990093312
FLINK=0
MLINK=0
[00483]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=135311235
RATE=14908
SPLITS=1
NSTART=27000000
NEND=29639520
NSIZE=123635712
FLINK=-1
MLINK=0
[00484]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=117229709
RATE=15736
SPLITS=1
NSTART=27000000
NEND=29203200
NSIZE=106549248
FLINK=-1
MLINK=0
[00485]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=100566410
RATE=15340
SPLITS=1
NSTART=27000000
NEND=28913760
NSIZE=89880576
FLINK=-1
MLINK=0
[00486]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=274273281
RATE=19754
SPLITS=1
NSTART=27000000
NEND=31188960
NSIZE=250245120
FLINK=-1
MLINK=0
[00487]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=72098359
RATE=15365
SPLITS=1
NSTART=27000000
NEND=28378080
NSIZE=65077248
FLINK=-1
MLINK=0
[00488]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=365578085
RATE=14736
SPLITS=1
NSTART=27000000
NEND=34248960
NSIZE=333557760
FLINK=-1
MLINK=0
[00489]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=94903856
RATE=14869
SPLITS=1
NSTART=27000000
NEND=28874880
NSIZE=87250944
FLINK=-1
MLINK=0
[00490]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=61580708
RATE=15617
SPLITS=1
NSTART=27000000
NEND=28166400
NSIZE=55842816
FLINK=-1
MLINK=0
[00491]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=78126684
RATE=15778
SPLITS=1
NSTART=27000000
NEND=28467360
NSIZE=71448576
FLINK=-1
MLINK=0
[00492]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=75179810
RATE=17953
SPLITS=1
NSTART=27000000
NEND=28258560
NSIZE=68603904
FLINK=-1
MLINK=0
[00493]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=70804356
RATE=16018
SPLITS=1
NSTART=27000000
NEND=28308960
NSIZE=64438272
FLINK=-1
MLINK=0
[00494]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=45997469
RATE=20554
SPLITS=1
NSTART=27000000
NEND=27672480
NSIZE=42117120
FLINK=-1
MLINK=0
[00497]
AUDIO=100
PGS=10
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=543608650
RATE=13465
SPLITS=1
NSTART=27000000
NEND=39804480
NSIZE=529035264
FLINK=0
MLINK=0
[00501]
AUDIO=11001
PGS=1100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=97267566
RATE=15506
SPLITS=1
NSTART=27000000
NEND=28951200
NSIZE=87859200
FLINK=-1
MLINK=0
[00502]
AUDIO=11001
PGS=1100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=482607655
RATE=15659
SPLITS=1
NSTART=27000000
NEND=36596160
NSIZE=438429696
FLINK=-1
MLINK=0
[00503]
AUDIO=11001
PGS=1100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=26442506
RATE=16673
SPLITS=1
NSTART=27000000
NEND=27495360
NSIZE=23384064
FLINK=-1
MLINK=0
[00504]
AUDIO=11001
PGS=1100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=30641975
RATE=13933
SPLITS=1
NSTART=27000000
NEND=27681120
NSIZE=30437376
FLINK=0
MLINK=0
[00505]
AUDIO=11001
PGS=1100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=97274468
RATE=15508
SPLITS=1
NSTART=27000000
NEND=28951200
NSIZE=87939072
FLINK=-1
MLINK=0
[00506]
AUDIO=11001
PGS=1100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=24379004
RATE=15279
SPLITS=1
NSTART=27000000
NEND=27495360
NSIZE=21596160
FLINK=-1
MLINK=0
[00508]
AUDIO=11001
PGS=1100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=97308975
RATE=15513
SPLITS=1
NSTART=27000000
NEND=28951200
NSIZE=87914496
FLINK=-1
MLINK=0
[00509]
AUDIO=1
PGS=100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=743468171
RATE=19006
SPLITS=1
NSTART=27000000
NEND=39800160
NSIZE=723732480
FLINK=0
MLINK=0
[00510]
AUDIO=1
PGS=100
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=2346495500
RATE=12696
SPLITS=4
NSTART=27000000
NEND=86806621
NSIZE=2285574144
FLINK=0
MLINK=0
[00511]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=135777076
RATE=14967
SPLITS=1
NSTART=27000000
NEND=29639520
NSIZE=123801600
FLINK=-1
MLINK=0
[00512]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=117574776
RATE=15789
SPLITS=1
NSTART=27000000
NEND=29203200
NSIZE=107028480
FLINK=-1
MLINK=0
[00513]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=100562959
RATE=15339
SPLITS=1
NSTART=27000000
NEND=28913760
NSIZE=90802176
FLINK=-1
MLINK=0
[00514]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=274035185
RATE=19735
SPLITS=1
NSTART=27000000
NEND=31188960
NSIZE=249630720
FLINK=-1
MLINK=0
[00515]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=71998289
RATE=15341
SPLITS=1
NSTART=27000000
NEND=28378080
NSIZE=64917504
FLINK=-1
MLINK=0
[00516]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=363090150
RATE=14621
SPLITS=1
NSTART=27000000
NEND=34248960
NSIZE=331210752
FLINK=-1
MLINK=0
[00517]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=94758927
RATE=14843
SPLITS=1
NSTART=27000000
NEND=28874880
NSIZE=86999040
FLINK=-1
MLINK=0
[00518]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=61594510
RATE=15621
SPLITS=1
NSTART=27000000
NEND=28166400
NSIZE=55511040
FLINK=-1
MLINK=0
[00519]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=78119783
RATE=15777
SPLITS=1
NSTART=27000000
NEND=28467360
NSIZE=71626752
FLINK=-1
MLINK=0
[00520]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=67843679
RATE=16004
SPLITS=1
NSTART=27000000
NEND=28258560
NSIZE=62035968
FLINK=-1
MLINK=0
[00521]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=68071423
RATE=15319
SPLITS=1
NSTART=27000000
NEND=28308960
NSIZE=61962240
FLINK=-1
MLINK=0
[00522]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=46090637
RATE=20600
SPLITS=1
NSTART=27000000
NEND=27672480
NSIZE=42037248
FLINK=-1
MLINK=0
[00523]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=135262925
RATE=14902
SPLITS=1
NSTART=27000000
NEND=29639520
NSIZE=123543552
FLINK=-1
MLINK=0
[00524]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=117616184
RATE=15795
SPLITS=1
NSTART=27000000
NEND=29203200
NSIZE=106868736
FLINK=-1
MLINK=0
[00525]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=100566410
RATE=15340
SPLITS=1
NSTART=27000000
NEND=28913760
NSIZE=89942016
FLINK=-1
MLINK=0
[00526]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=274359548
RATE=19761
SPLITS=1
NSTART=27000000
NEND=31188960
NSIZE=249937920
FLINK=-1
MLINK=0
[00527]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=72015543
RATE=15345
SPLITS=1
NSTART=27000000
NEND=28378080
NSIZE=65132544
FLINK=-1
MLINK=0
[00528]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=78157740
RATE=15786
SPLITS=1
NSTART=27000000
NEND=28467360
NSIZE=71700480
FLINK=-1
MLINK=0
[00529]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=68023114
RATE=15307
SPLITS=1
NSTART=27000000
NEND=28308960
NSIZE=61949952
FLINK=-1
MLINK=0
[00530]
AUDIO=111000011
PGS=100110000101
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=46076835
RATE=20593
SPLITS=1
NSTART=27000000
NEND=27672480
NSIZE=42098688
FLINK=-1
MLINK=0


Thanks.

[AmigaFuture]

BDREBUILDER.INI
[Options]
VERSION=0.40.0.10
MODE=0
ENCODE_QUALITY=0
MULTIPROCESS=4
MKV_MUXSUPS=1
ENABLE_TEST=1
ONEPASS_ENCODING=0
AUTO_QUALITY=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=1
AC3_REENCODE=0
AC3_640=0
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
MOVIEONLY_TYPE=10
ALTCRF=20
ALT_TARGET=7600
ALTMETHOD=2
ALTAUTOCROP=0
VERBOSE_STATUS=1
TARGET_SIZE=23500
AUTO_BURN=0
ENABLE_BLANKING=1
QUICK_EXTRAS=0
[Paths]
SOURCE_PATH=J:\!BLU-RAY RIPS\INCREDIBLES\
WORKING_PATH=E:\BLU-RAY\REBUILDER\

[sonate]

There are times when I make a menu and movie backup, inadvertently hitting a wrong menu button will infrequently but surely end up dead ending any further navigation out of that particular item and or calling the main menu. Is there any way I can easily disable or deactivate a particular menu button to avoid the problem all together? If anyone knows, would you please steer me to where I can find how to accomplish this.

Thanks

[omegaman7]

Bug? Perhaps. I'll let you be the judge of that ;)

I'm reprocessing, but I don't believe that to be the issue. I'm running Harry potter 7 Pt 1, and I want to output to MKV. When I go to the setup menu to remove the spanish audio, and then return to the BD rebuilder main window, it seems to default back to the original chosen playlist. Which by the way, is the incorrect playlist. I had to manually choose the appropriate playlist. Going to setup, after choosing "other movie only playlist", will default back to the programs playlist decision. Thankfully I noticed the run time was incorrect LOL! You may already be aware of this though.

I'm running it FROM optical disc, but that shouldn't be the problem. At least I wouldn't think so :S

[jdobbs]

Bug? Perhaps. I'll let you be the judge of that ;)

I'm reprocessing, but I don't believe that to be the issue. I'm running Harry potter 7 Pt 1, and I want to output to MKV. When I go to the setup menu to remove the spanish audio, and then return to the BD rebuilder main window, it seems to default back to the original chosen playlist. Which by the way, is the incorrect playlist. I had to manually choose the appropriate playlist. Going to setup, after choosing "other movie only playlist", will default back to the programs playlist decision. Thankfully I noticed the run time was incorrect LOL! You may already be aware of this though.

I'm running it FROM optical disc, but that shouldn't be the problem. At least I wouldn't think so :S The SETUP menu represents global settings. So when you change anything in SETUP -- the disc is reread and you are starting from scratch... (just like exiting and restarting BD-RB). That's why the default playlist is selected again. If you want to change anything in SETUP -- you should always do that first.

[jwjohnson]

It's been that way for as long as I can remember. If you make any other changes after selecting "other movie only playlist" it will revert to the default playlist. It would be nice if it stuck on the one you selected. I've just altered my workflow so that's the last thing I check before starting the encode.

EDIT: Posted while JDobbs was writing his reply.

[bikerman]

hi

running windows 7 64 bit sp1, never had a problem with previous releases of bdrebuilder, but the latest version (04010) causes a BSD ... anyone else had this, and any ideas how to get around it?

[Atak_Snajpera]

BSD ... anyone else had this, and any ideas how to get around it?
check cpu stability in LinX (http://dl.getdropbox.com/u/663563/LinX/en/LinX.7z). check memory in memtest86 (http://www.memtest.org/)

[omegaman7]

The SETUP menu represents global settings. So when you change anything in SETUP -- the disc is reread and you are starting from scratch... (just like exiting and restarting BD-RB). That's why the default playlist is selected again. If you want to change anything in SETUP -- you should always do that first.
That's EXACTLY why I figured you were aware :p That makes perfect sense.

[bikerman]

I have change the 'compatability' mode to windows xp sp3, and so far I have not had a BSoD... fingers crossed ...:thanks:

[bikerman]

ok, that didn't work... 2 mins after I posted my last message I got BSod again.... :o(

[HiQ123]

I have a problem with Pirates of the Caribbean.
Log:
[07.13.12] BD Rebuilder v0.40.10 (beta)
[23:56:07] Source: PIRATES1_DEU
- Input BD size: 33,18 GB
- Approximate total content: [03:35:38.583]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- MOVIE and MENUS mode enabled
- SHUTDOWN at completion enabled
- Auto Quality: Better (Faster), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[23:56:08] PHASE ONE, Encoding
- [23:56:08] Processing: VID_00001 (1 of 31)
- [23:56:08] Extracting A/V streams [VID_00001]
- Error in attempt to extract audio/subs.
- AV frame too large (57344 bytes). Increase AV buffer.
[00:09:47] - Failed to retrieve audio, aborted

Inspect.exe:

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- BD Rebuilder v0.40.0.10, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

Is it because the audio stream is in LPCM ?

[JJB]

"AV frame too large (57344 bytes). Increase AV buffer"

Usually indicates a bad rip.

[HiQ123]

"AV frame too large (57344 bytes). Increase AV buffer"

Usually indicates a bad rip.

Hm, okay :(

[jdobbs]

ok, that didn't work... 2 mins after I posted my last message I got BSod again.... :o( Your system isn't stable. If you are overclocked -- you need to slow down your processor. X264 is the ultimate challange for overclocking. Also check your processor's heatsink for dust/dirt and clean if necessary. Reseat your memory modules.

[jdobbs]

Hm, okay :( Just for reference -- I've done the US version of "Pirates of the Caribbean" with no issues.

[HiQ123]

Just for reference -- I've done the US version of "Pirates of the Caribbean" with no issues.

I will try it again...

[jdobbs]

I will try it again... Make sure you rip it again.

That error is coming from TSMUXER -- it is saying that one of the streams (usually an audio stream) has buffer requirements that aren't reasonable for something compliant with BD. That normally means a bad rip. Interestingly, in the exceptionally large number of discs I've done in testing, I don't remember ever actually seeing that error myself. It has been reported by others. I rip with AnyDVD HD.

[Weirdo]

BD Rebuilder (Error Condition) experienced an error 3304 [18:52:49] - CreateBDFiles() 00055 3304. If I press OK will it abort? Do you need log files? I can only see ErrLog.txt which only mentions that message.

edit: Prior to encoding, I set inspect.exe to display all ok. At the bottom: Resizing Subtitle_01 to 1280x720 PID: 4608, JAPANESE.

[AmigaFuture]

JDobbs,

Any thoughts about "The Incredibles"? I've notice with my "The Incredible Hulk (2008)" main move audio does the same thing when setting to re-render the DTS to AC3. Thanks.

[bikerman]

Your system isn't stable. If you are overclocked -- you need to slow down your processor. X264 is the ultimate challange for overclocking. Also check your processor's heatsink for dust/dirt and clean if necessary. Reseat your memory modules.

Hi

I have no problems with any other apps, and this problem only started since the latest build of bdrebuilder... I am not overclocking either...

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)
;)

[omegaman7]

Hi

I have no problems with any other apps, and this problem only started since the latest build of bdrebuilder... I am not overclocking either...

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)
;)

I've used the new version more than a dozen times without fault. Given the season(hot weather), I'd look very closely at cooling your computer better?

[musiclover]

Hi

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)
;)

You can go back by installing the old version and changing te date of your computer to the past.

[bikerman]

You can go back by installing the old version and changing te date of your computer to the past.

thanks will give it a go :thanks:

[bikerman]

I've used the new version more than a dozen times without fault. Given the season(hot weather), I'd look very closely at cooling your computer better?

hey dude

the cooling is not an issue over here, the weather aint very warm at all! lol

[ihmcjacky]

I face error when nearly finish the muxing process, Anyone know how to solve this? (I am quite sure it is not the file's problem)

Here is the log


----------------------
[07/18/12] BD Rebuilder v0.40.10 (beta)
[14:52:59] Source: MISSION_IMPOSSIBLE_(1996)
- Input BD size: 36.47 GB
- Approximate total content: [02:17:08.677]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[14:53:03] PHASE ONE, Encoding
- [14:53:03] Processing: VID_00351 (1 of 1)
- [14:53:03] Extracting A/V streams [VID_00351]
- [15:20:28] Reencoding video [VID_00351]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 177,792 frames
- Bitrate: 18,689 Kbs
- [15:20:28] Reencoding: VID_00351, Pass 1 of 1
- [19:08:04] Video Encode complete
- [19:08:04] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:08:05] Multiplexing M2TS
[19:34:22]PHASE ONE complete
[19:34:22]PHASE TWO - Rebuild Started
- [19:34:22] Rebuilding BD file Structure
- [19:34:22] CopyDirStructure() 00052 1200
- [19:40:20] CopyDirStructure() 00052 1200
[19:54:02] - Aborted at user request

[Ch3vr0n]

where's the rest of the log?

[Adbear]

Hi

I have no problems with any other apps, and this problem only started since the latest build of bdrebuilder... I am not overclocking either...

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)
;)

What stop code message are you getting?

[bikerman]

What stop code message are you getting?

i don't have time to write it down before is disappears..

however, after turning my clock back, and running the previous version, I did get an error stating that the h.264 (or whatever the number was) had stopped working...

clicked 'close the application' and got another BSoD...

[Adbear]

then you need to go into your advanced system settings and tell your system not to reboot on bluescreen

[bassnut]

i don't have time to write it down before is disappears..

however, after turning my clock back, and running the previous version, I did get an error stating that the h.264 (or whatever the number was) had stopped working...

clicked 'close the application' and got another BSoD...

When you get this message it is most likely do to an unstable system ..... X64 Has Stopped Working ..... Time to look at your OC or what else might be causing your sytem to be unstable.

[jdobbs]

i don't have time to write it down before is disappears..

however, after turning my clock back, and running the previous version, I did get an error stating that the h.264 (or whatever the number was) had stopped working...

clicked 'close the application' and got another BSoD... Your system isn't stable. Whether you want to accept that doesn't really matter in the context of this thread. It isn't a bug and therefore shouldn't be posted here.

[Wizzu]

On one of my systems, I can't get bd rebuilder to work on any Blu-Ray with HD audio.... :(

AFTEN errors when encoding AC3.

Here is what I get each and every time:

- [00:01:04] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [00:01:07] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- ERROR in attempt to reencode audio (AFTEN) [AUD_00506_4352.AVS]
[00:01:08] - Failed to reencode audio, aborted

I tried everything I could think of: Re-configuring ffdshow, Uninstalling/reinstalling ffdshow, haaali and AVSynth... no joy.

Inspect results seem OK...

- Windows Version: 5.1 [2600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- FFDSHOW VC-1 set "disabled", WMP11, Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- BD Rebuilder v0.40.0.10, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

I compared the settings (ffdshow and bd rebuilder) with my other computer, they are exactly the same.

Both computers run XP SP3.

But... everything works fine on the other computer and not on this one!

I'm at a loss. :confused:

[sonate]

On one of my systems, I can't get bd rebuilder to work on any Blu-Ray with HD audio.... :(

AFTEN errors when encoding AC3.

Here is what I get each and every time:
I tried everything I could think of: Re-configuring ffdshow, Uninstalling/reinstalling ffdshow, haaali and AVSynth... no joy.

Inspect results seem OK...
I compared the settings (ffdshow and bd rebuilder) with my other computer, they are exactly the same.

Both computers run XP SP3.

But... everything works fine on the other computer and not on this one!

I'm at a loss. :confused:

It may have more to do with the particular CPU's you are using and compatibility with the two versions of aften.exe BDRB incorporates.

The most ancient CPU's I've used and found workable results with current versions of BDRB are the P4-478 Northwood 3.2 and 3.0 . Maybe you should list what you are using, and if this is the problem possibly swap the CPU with one that is compatible?

[Wizzu]

It may have more to do with the particular CPU's you are using and compatibility with the two versions of aften.exe BDRB incorporates.

The most ancient CPU's I've used and found workable results with current versions of BDRB are the P4-478 Northwood 3.2 and 3.0 . Maybe you should list what you are using, and if this is the problem possibly swap the CPU with one that is compatible?Thanks for the help. :)

This is very interesting. I actually just installed a new CPU on this machine, an AMD Phenom II X4 965. Not really an "oldie". ;)

And the irony is that I installed this new CPU on this machine so I could use bd rebuilder with it, since I considered it as too slow with its older Athlon II X2!

The other machine (the one which works OK with bd rebuilder) runs a Phenom II X6 1055T.

I wonder where to go from here. If both AFTEN versions included with bd-rb can't work with this Phenom II X4 965, I'm kinda stuck then, am I?

[jdobbs]

Thanks for the help. :)

This is very interesting. I actually just installed a new CPU on this machine, an AMD Phenom II X4 965. Not really an "oldie". ;)

And the irony is that I installed this new CPU on this machine so I could use bd rebuilder with it, since I considered it as too slow with its older Athlon II X2!

The other machine (the one which works OK with bd rebuilder) runs a Phenom II X6 1055T.

I wonder where to go from here. If both AFTEN versions included with bd-rb can't work with this Phenom II X4 965, I'm kinda stuck then, am I? A Phenom II X4 965 should work fine. Something else has to be wrong. There are a lot of people using BD-RB with that or similar processors. I'm personally using a Phenom II X4 945 on one of my machines.

It sounds more like a configuration error. Can you post the contents of AUD_00506_4352.AVS?

[Wizzu]

A Phenom II X4 965 should work fine. Something else has to be wrong. There are a lot of people using BD-RB with that or similar processors. I'm personally using a Phenom II X4 945 on one of my machines.

It sounds more like a configuration error. Can you post the contents of AUD_00506_4352.AVS?Thanks jdobbs. :)
I just crave for a "wrong config" explanation for this issue, since it could then be fixed easily...

Here's the content of the file:
#Created by BD Rebuilder - v0.40.10 (beta)
LoadPlugin("D:\PC\PC_Logitheque\_Logiciels\BD Rebuilder et accessoires\BD-RBV04010\BD_Rebuilder\tools\nicaudio.dll")
audio=DirectShowSource("G:\§-VIDEO OUT\INCREDIBLES, FULL BD25\WORKFILES\AUD_00506_4352.mkv").Amplify(1)
ConvertAudioTo16bit(ResampleAudio(audio, 48000))

[jdobbs]

Thanks jdobbs. :)
I just crave for a "wrong config" explanation for this issue, since it could then be fixed easily...

Here's the content of the file:What kind of audio source is it (DTS, AC3, LPCM)?

A couple things to try:

1. Add this line to the "[Options]" area of your Config file:

AUDIO_DIRECTSHOW=0

2. If that doesn't work, delete it and try going into the FFDSHOW Audio Decoder Configuration utility and set "Uncompressed" to "All Supported" in the CODEC list.

[Wizzu]

I really appreciate the help :)
What kind of audio source is it (DTS, AC3, LPCM)? DTS-HD XLL
(Same as various BD sources failing to re-encode to AC3: The Incredibles, the Big Lebowski, the Frighteners..)
2. If that doesn't work, delete it and try going into the FFDSHOW Audio Decoder Configuration utility and set "Uncompressed" to "All Supported" in the CODEC list.Already done that - I dot it each time I install and setup bd-rebuilder (as per your instructions in the first post ;))
1. Add this line to the "[Options]" area of your Config file:

AUDIO_DIRECTSHOW=0
Didn't work :(- [15:25:49] Processing: VID_00506 (5 of 79)
- [15:25:49] Extracting A/V streams [VID_00506]
- [15:25:55] Reencoding video [VID_00506]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 264 frames
- Bitrate: 4'250 Kbs
- [15:25:55] Reencoding: VID_00506, Pass 1 of 2
- [15:26:01] Reencoding: VID_00506, Pass 2 of 2
- [15:26:14] Video Encode complete
- [15:26:14] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [15:26:14] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- ERROR in attempt to reencode audio (AFTEN) [AUD_00506_4352.AVS]
[15:26:14] - Failed to reencode audio, aborted

[jdobbs]

Try playing AUD_00506_4352.AVS with MediaPlayer Classic (in the BD-RB tools folder) and see you get the audio.

Interesting that it is only 264 frames...

[Wizzu]

Try playing AUD_00506_4352.AVS with MediaPlayer Classic (in the BD-RB tools folder) and see you get the audio.

Interesting that it is only 264 frames...
MPC displays: [MTAudioDTSDsource: unable to open file "00506.track_4352.mts"] but seems to play the file nonetheless (the cursor moves).

Nothing is audible but I'm not sure if it's supposed to.The 264 frames only, well that's because it's just one of these countless small segments on Disney DVDs.... maybe it's a mute one!

What I'll do, then, is that I'll launch a movie-only backup so to be sure that the AVS file is actually supposed to have something audible... ;)

[Wizzu]

What I'll do, then, is that I'll launch a movie-only backup so to be sure that the AVS file is actually supposed to have something audible... ;)That was a lame idea from me, since I could just use bdrb's "preview" feature (in MPC) for the relevant segment! :stupid:

Just did that and well, the original segment does have audible audio.

[jdobbs]

Can you play 00506.track_4352.dts with MPC?

[Wizzu]

Can you play 00506.track_4352.dts with MPC?Yes :)

[m.rup]

Problem disc: Lord of the Rings Extended, Return of the King, feature disc #2 (part two).

Error Condition (popup): "BD Rebuilder experienced an error 2403 [19:29:13] CorrectMPLS() 00006 2403".


Same here.

[jdobbs]

Same here. Unfortunately I'm having trouble finding that feature/disc. Is it only available as a part of the complete (expensive) LOTR ED set?

[A.Fenderson]

Unfortunately I'm having trouble finding that feature/disc. Is it only available as a part of the complete (expensive) LOTR ED set?

As for now, yes. The extended edition individual titles are due to be released on August 28th (http://www.blu-ray.com/movies/The-Lord-of-the-Rings-The-Return-of-the-King-Blu-ray/19931/)--not sure if they'll be the exact same discs, but I wouldn't doubt it.

[m.rup]

Unfortunately I'm having trouble finding that feature/disc. Is it only available as a part of the complete (expensive) LOTR ED set?

Any possibility for supporting you? (e.g. FTP)

[jdobbs]

I have updated the first post of this thread with links to an new version of BD Rebuilder (v0.40.11). Changes for this release:- Added a "vKeyint" parameter to the ALTERNATE.TXT
definition file. This allows the user to specify
a maximum key interval (GOP size) for non-iPod &
iPad MP4 and MKV files. Setting to "Auto" will use
an interval of 10x the framerate (10 sec intervals).
- Made corrections to AVS entries when deinterlacing
or iVTC with certain hidden settings.
- Changed the naming algorithm for MKV and MP4 files
so file suffixes begin with "01" rather than "00".
- Corrected an error in which a secondary stream that
is a different length than the primary can cause
failure when used with MULTIPROCESS.
- Fixed error related to status of list when using
batch processing.
- Corrected an issue in which under odd circumstances
it was possible for a lengthy playlist (e.g. feature)
to not be selected or shown under the movie-only
playlist selection dialog.
- Corrected an issue in which secondary streams could
carry over the interlaced/progressive characteristics
of a previous encode. This could, rarely, result in
a secondary stream being incorrectly flagged as
interlaced.
- Updated the included version of X264.EXE to the
latest release (r2208).
- Updated the included version of X264-64.EXE to
the latest release (r2208).
- Other minor corrections and cosmetic fixes.

[AmigaFuture]

I don't understand why the audio is missing, and have tried different settings. I'm wondering if it's something to do with the muxing.. I'll check "The Incredibles" more in some other moment. Anyway, I figured I'd try something different. So I ripped my "The Matrix" Blu-ray and remembering some comments about Picture in Picture I decided to try Full Backup. Everything shows as re-encoded fine (A/V). Information about who's speaking shows but no video and the audio has gaps in the beginning like it's trying to reconnect the audio. I didn't listen too far. Currently the program is set to use High Speed (BD25). I've set it to the setting as well. v0.40.10. Cropping is not set.

I'm also trying "The Matrix" on another machine, fresh install of 7 64-bit.. Same settings as main machine. Currently processing.


Edit: I see a new release. Am trying it with my main machine.

0.40.11 keeps failing now at the first secondary video stream. I'm trying different settings.

[AmigaFuture]

BDREBUILDER.INI
[Options]
VERSION=0.40.0.11
MODE=0
ENCODE_QUALITY=0
MKV_MUXSUPS=1
ENABLE_TEST=1
ONEPASS_ENCODING=0
AUTO_QUALITY=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=1
AC3_REENCODE=0
AC3_640=0
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
MOVIEONLY_TYPE=10
ALTCRF=20
ALT_TARGET=7600
ALTMETHOD=2
ALTAUTOCROP=0
VERBOSE_STATUS=1
TARGET_SIZE=23500
AUTO_BURN=0
ENABLE_BLANKING=1
QUICK_EXTRAS=0
[Paths]
SOURCE_PATH=J:\!BLU-RAY\THE_MATRIX\
WORKING_PATH=E:\BLU-RAY\REBUILDER\


BD-REBUILDER.LOG
[07/21/12] BD Rebuilder v0.40.11 (beta)
[19:29:02] Source: THE_MATRIX
- Input BD size: 37.10 GB
- Approximate total content: [06:43:52.107]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- Quality: Good (Very Fast), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[19:29:03] PHASE ONE, Encoding
- [19:29:03] Processing: VID_00000 (1 of 29)
- [19:29:03] Extracting A/V streams [VID_00000]
- [19:37:59] Reencoding video [VID_00000]
- [19:37:59] Reencoding secondary video [TRK_02]
- Encode failed. Aborting.
- BD-Rebuilder v0.40.11 (beta)
- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[19:38:01] - Failed video encode, aborted


More than 8GB of RAM. 3X the space needed for data and CPU isn't over heating...very stable overclocking. The machine been used to backup several of my Blu-ray disks and plays some intense games without challenges from OC. I burned AnyDVD rip to BD-RE-DL and it plays as should with PowerDVD 12 and my LG player just as my original does...so rip is good. Any suggestions? Something I'm missing? Thanks a lot.

THE_MATRIX.INF
[Status]
LABEL=THE_MATRIX
VERSION=v0.40.11 (beta)
SOURCE_SIZE=39830640891
SOURCE_VIDEO_SIZE=39405803520
TARGET_SIZE=24641536000
REDUCTION=.614546499900936
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=eng;
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=1
[00000]
AUDIO=110000011111
PGS=0100000000000010000000000
SPLITS=1

[Weirdo]

New version crashed again on the same disc and at the same point: "Resizing Subtitle_01 to 1280x720 PID:4608, JAPANESE".
Inspect.exe all ok.

http://img3.imageshack.us/img3/2361/bdrebuildererrorconditi.th.jpg (http://img3.imageshack.us/my.php?image=bdrebuildererrorconditi.jpg)

[07/14/12]BD Rebuilder v0.40.11 (beta)
[10:19:48] Source: DARK_KNIGHT_BONUS_DISC_DOUBLE
- Input BD size: 19,48 GB
- Approximate total content: [03:39:37.530]
- Target BD size: 7,84 GB
- Windows Version: 6.1 [7601]
- RESIZE 1080p to 720p enabled
- Quality: High Quality (Default), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[10:19:48] PHASE ONE, Encoding
- [10:19:48] Processing: VID_00000 (1 of 30)
- [10:19:48] Extracting A/V streams [VID_00000]
- [10:20:56] Reencoding video [VID_00000]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 66.169 frames
- Convert: 1280x720, 23,976fps, 66.169 frames
- Bitrate: 4.535 Kbs
- [10:20:56] Reencoding: VID_00000, Pass 1 of 1
- [11:17:51] Video Encode complete
- [11:17:51] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [11:17:51] Multiplexing M2TS
- Non-text or anomalous PGS 00000.track_4608.sup ignored.
- [11:25:27] Processing: VID_00001 (2 of 30)
- [11:25:27] Extracting A/V streams [VID_00001]
- [11:26:31] Reencoding video [VID_00001]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 66.241 frames
- Convert: 1280x720, 23,976fps, 66.241 frames
- Bitrate: 4.594 Kbs
- [11:26:31] Reencoding: VID_00001, Pass 1 of 1
- [12:28:12] Video Encode complete
- [12:28:12] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [12:28:12] Multiplexing M2TS
- Non-text or anomalous PGS 00001.track_4608.sup ignored.
- [12:28:15] CreateBDFiles() 00055 3304
[12:35:30]PHASE ONE aborted by user request

[jdobbs]

@weirdo

I think I've found that error... but I'll need to test it with that disc

[jdobbs]

I don't understand why the audio is missing, and have tried different settings. I'm wondering if it's something to do with the muxing.. I'll check "The Incredibles" more in some other moment. Anyway, I figured I'd try something different. So I ripped my "The Matrix" Blu-ray and remembering some comments about Picture in Picture I decided to try Full Backup. Everything shows as re-encoded fine (A/V). Information about who's speaking shows but no video and the audio has gaps in the beginning like it's trying to reconnect the audio. I didn't listen too far. Currently the program is set to use High Speed (BD25). I've set it to the setting as well. v0.40.10. Cropping is not set.

I'm also trying "The Matrix" on another machine, fresh install of 7 64-bit.. Same settings as main machine. Currently processing.


Edit: I see a new release. Am trying it with my main machine.

0.40.11 keeps failing now at the first secondary video stream. I'm trying different settings. I have "The Matrix" running now. I'll report what I find.

[Weirdo]

@weirdo

I think I've found that error... but I'll need to test it with that disc
Thanks jdobbs. Is it a Japanese-only subtitle issue so I could disable them and try again or not?

[Wizzu]

Can you play 00506.track_4352.dts with MPC?

Yes :)

So to summarize:

- Playing the extracted DTS (00506.track_4352.dts): plays OK, audible :)
- Playing the derivated AVS (AUD_00506_4352.AVS): plays with no sound and an error message (MTAudioDTSDsource: unable to open file "00506.track_4352.mts" ) :(

Does this imply that my issue with failing to encode to AC3 (http://forum.doom9.org/showthread.php?p=1583796#post1583796) is not due to AFTEN but rather to AviSynth?
:confused:

[jdobbs]

Thanks jdobbs. Is it a Japanese-only subtitle issue so I could disable them and try again or not? I'm pretty sure the problem is in the subtitle (PGS) itself. The error within BD Rebuilder is the way it handled the problematic subtitle. If you de-select the japanese subtitle the problem should go away.

[jdobbs]

So to summarize:

- Playing the extracted DTS (00506.track_4352.dts): plays OK, audible :)
- Playing the derivated AVS (AUD_00506_4352.AVS): plays with no sound and an error message (MTAudioDTSDsource: unable to open file "00506.track_4352.mts" ) :(

Does this imply that my issue with failing to encode to AC3 (http://forum.doom9.org/showthread.php?p=1583796#post1583796) is not due to AFTEN but rather to AviSynth?
:confused: Yes. That's correct. Both DirectshowSource() and NicDTSSource() found an issue with the source -- and that leads me to believe that either the source or the configuration is somehow wrong. Unfortunately the source is out of my control, and I'm currently at a loss what configuration issue it may be. A couple thoughts:

1. Is DTS encoding enabled in your FFDSHOW audio configuration?
2. Do you have some other DTS decoder that is interfering with DirectshowSource()? Codec packs installed? It's significant that MPC can play the source but DirectshowSource() can't.

[Capsbackup]

[Paths]
SOURCE_PATH=J:\!BLU-RAY\THE_MATRIX\
WORKING_PATH=E:\BLU-RAY\REBUILDER\
[/CODE]


Just curious, but why is there a " ! " in your Source_Path ?? :confused:

[Wizzu]

that leads me to believe that either the source or the configuration is somehow wrong. If by "the source" you mean the Blu-Ray, that's not the culprit: these discs that I can't process with the computer in question, were processe flawlessly with my other computer...I'm currently at a loss what configuration issue it may be. Mee too, since I really re-checked everything and both ffdshow (audio+video) and bdrebuilder are setup exactly the same on both computers.1. Is DTS encoding enabled in your FFDSHOW audio configuration?Yes...Do you have some other DTS decoder that is interfering with DirectshowSource()? Codec packs installed? It's significant that MPC can play the source but DirectshowSource() can't.I had been thinking along the same lines, and triple-checked that I had no thrid-party codecs or filters. I came to great lenghts to make sure that the system was "clean".

Mmmmh. That's a tough one. :( I'm at a loss, you're at a loss, well, I'm kinda stuck. :D

So my next move will be to multi-boot this computer with a fresh XP install, so to determine for sure if the problem lies with the config/software or with the hardware (which is still a possibility...)

[Wizzu]

So my next move will be to multi-boot this computer with a fresh XP install, so to determine for sure if the problem lies with the config/software or with the hardware (which is still a possibility...)Looks like I have a hardware compatibility issue on my hands... :(

Fresh bd-rb install on a fresh XP SP3 partition:
----------------------
[07/22/12] BD Rebuilder v0.40.10 (beta)
[17:22:31] Source: FRIGHTENERS_ENTIER
- Input BD size: 45.17 GB
- Approximate total content: [07:18:17.436]
- Target BD size: 22.95 GB
- Windows Version: 5.1 [2600]
- Auto Quality: Better (Faster), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[17:22:31] PHASE ONE, Encoding
- [17:22:31] Processing: VID_50294 (1 of 38)
- [17:22:31] Extracting A/V streams [VID_50294]
- [17:22:36] Reencoding video [VID_50294]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 168 frames
- [17:22:36] Reencoding: VID_50294, Pass 1 of 1
- [17:22:41] Video Encode complete
- [17:22:41] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [17:22:41] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- ERROR in attempt to reencode audio (AFTEN) [AUD_50294_4352.AVS]
[17:22:41] - Failed to reencode audio, aborted

No overclocking on this machine. Ironically, my other machine IS OC'ed and shows no issues with bd-rb encoding. :rolleyes:

MSI 770-C45 (AM3) (http://www.msi.com/product/mb/770-C45.html)
Phenom II X4 965
4GB RAM (checked)

I'm not knowledgable enough to know if an extension card (or its drivers) may interfere with audio decoding/encoding? Is it worth it to even try removing some PCI cards? (I have and IDE extension card and a Parallel port extension card). :confused:

-

[RobertM]

Looks like I have a hardware compatibility issue on my hands...

Fresh bd-rb install on a fresh XP SP3 partition:

Are you using the same rip on both machines (from a network location, for example) or are you re-ripping on the faulty machine? It is a minor possibility that you may have a failing optical drive, which could produce a bad rip without giving an error message. You could eliminate this variable by copying over the rip from the good machine to the bad one, and see what happens.

Like I said, not a high probability of success, but easy enough to try.

[Wizzu]

Are you using the same rip on both machines (from a network location, for example) or are you re-ripping on the faulty machine? It is a minor possibility that you may have a failing optical drive, which could produce a bad rip without giving an error message. You could eliminate this variable by copying over the rip from the good machine to the bad one, and see what happens.Thanks for the help. :)
Sadly, I'm always using the same BD rips (external HD) on both machines. Nice try, though. :)

[AmigaFuture]

Just curious, but why is there a " ! " in your Source_Path ?? :confused:

Because I love Directory Opus as a file manager (do not like Windows...erm, Windows) and using an ! will force a directory to be at the top of an alphabetized list. I like doing things a bit different than "average". :)

Curiosity is awesome.


JDobbs, Okay.

[Phreaker47]

Having an issue with "ALIENS". It's 87% complete, then suddenly:

----------------------
[07/22/12] BD Rebuilder v0.40.11 (beta)
[13:39:59] Source: ALIENS
- Input BD size: 44.51 GB
- Approximate total content: [03:22:30.636]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
- Resuming from previously started job.
[13:40:01] PHASE ONE, Encoding
- [13:40:01] Processing: VID_01136 (27 of 42)
- [13:40:01] Reencoding video [VID_01136]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 4,768 frames
- Bitrate: 11,997 Kbs
- [13:40:01] Reencoding: VID_01136, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.11 (beta)
- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[13:40:01] - Failed video encode, aborted
----------------------------------------------

Says everything is "OK", but fails anyway. Any thoughts?

[Phreaker47]

Edit: I guess AVISynth got corrupted somehow. I reinstalled it, and now it appears to be working.

[Chuckwagon]

JDobbs,
I have encountered a problem using version 40.11. I saw the posts about a Matrix backup that failed, and I had recently done a backup of the Matrix which gave me odd sized results, so I thought I'd look at that again.

My first attempt at backing up The Matrix worked, using 40.10, but the file size ended up being too big for a BD-25. Eh, oh well, it happens. So I decided to try again with a custom size of 21500, but since 40.11 was now out I figured I'd use it as well. It failed with this error

- Error in attempt to multiplex: MUX_00000.meta
- Can't open file: D:\BD REBUILDER\WORKFILES\VID_00000_2.AVS.1.264

So I rolled back to 40.10 and it works fine. Since 40.10 worked, I once again tried 40.11. Same error.

In summary, the backup completes with 40.10 and fails with 40.11. I have done it twice with each version, failed twice with 40.11 and succeeded twice with 40.10. I don't want to clutter up the posts with a ton of info if you don't need it, but I do have the output text files and config file if you need them. What info would you like?

[jdobbs]

JDobbs,
I have encountered a problem using version 40.11. I saw the posts about a Matrix backup that failed, and I had recently done a backup of the Matrix which gave me odd sized results, so I thought I'd look at that again.

My first attempt at backing up The Matrix worked, using 40.10, but the file size ended up being too big for a BD-25. Eh, oh well, it happens. So I decided to try again with a custom size of 21500, but since 40.11 was now out I figured I'd use it as well. It failed with this error

- Error in attempt to multiplex: MUX_00000.meta
- Can't open file: D:\BD REBUILDER\WORKFILES\VID_00000_2.AVS.1.264

So I rolled back to 40.10 and it works fine. Since 40.10 worked, I once again tried 40.11. Same error.

In summary, the backup completes with 40.10 and fails with 40.11. I have done it twice with each version, failed twice with 40.11 and succeeded twice with 40.10. I don't want to clutter up the posts with a ton of info if you don't need it, but I do have the output text files and config file if you need them. What info would you like? I just did "The Matrix" earlier today with v0.40.11 after I saw a report -- and it completed successfully. It also plays back correctly.

That filename references the secondary video track. It looks like it was never created. The ".1." means you are using multiprocessing mode... you might try turning it off to see what happens.

[Chuckwagon]

JDobbs,
I have encountered a problem using version 40.11. I saw the posts about a Matrix backup that failed, and I had recently done a backup of the Matrix which gave me odd sized results, so I thought I'd look at that again.

My first attempt at backing up The Matrix worked, using 40.10, but the file size ended up being too big for a BD-25. Eh, oh well, it happens. So I decided to try again with a custom size of 21500, but since 40.11 was now out I figured I'd use it as well. It failed with this error

- Error in attempt to multiplex: MUX_00000.meta
- Can't open file: D:\BD REBUILDER\WORKFILES\VID_00000_2.AVS.1.264

So I rolled back to 40.10 and it works fine. Since 40.10 worked, I once again tried 40.11. Same error.

In summary, the backup completes with 40.10 and fails with 40.11. I have done it twice with each version, failed twice with 40.11 and succeeded twice with 40.10. I don't want to clutter up the posts with a ton of info if you don't need it, but I do have the output text files and config file if you need them. What info would you like?

That filename references the secondary video track. It looks like it was never created.

The file is there, it's 433,593KB in size. Which is interesting as I did a "movie and menus" backup in edit mode and made sure everything was blanked except for the main movie. I can drag the file to PowerDVD and it will play. So it seems to have reencoded (I think that stream is 4GB originally.) It's such a long extra that it does not auto blank, so I manually blanked it. I will try again setting the threshold long enough to get that stream automatically and see what happens.

[AmigaFuture]

JDobbs, the "The Matrix" - Bonus, In-Movie Experience also play correctly for you? Not just the movie..? With 40.11?

[jdobbs]

The file is there, it's 433,593KB in size. Which is interesting as I did a "movie and menus" backup in edit mode and made sure everything was blanked except for the main movie. I can drag the file to PowerDVD and it will play. So it seems to have reencoded (I think that stream is 4GB originally.) It's such a long extra that it does not auto blank, so I manually blanked it. I will try again setting the threshold long enough to get that stream automatically and see what happens. Ok, I'm confused. I just remembered that multiple instances should be disabled on secondary streams now... I'll do some testing.

[jdobbs]

JDobbs, the "The Matrix" - Bonus, In-Movie Experience also play correctly for you? Not just the movie..? With 40.11? Haven't tried it. I keep "The Matrix" on my hard drive -- it's one I use for testing all the time. Are you saying there is a bonus disc or a bonus feature? If it's the former I'll have to go through some boxes to see if I can find it.

[Edit]

Never mind, I see it. Yes it is working correctly. I'm playing it right now.

[Chuckwagon]

Ok, I'm confused. I just remembered that multiple instances should be disabled on secondary streams now... I'll do some testing.

Oops, my bad. The file it was looking for isn't there. One with the same name, minus a .1 in the name, is there. I think it's the embedded secondary video, so it doesn't get blanked. It just looks a lot like the other feature video of the same time length. I kept the workfiles from the failed encode and I'm watching as it tries again to see if the same files all show up.

If this one fails as well I will try a movie only backup. Or whatever you want for a next step. :)

EDIT: I tried a Movie Only backup with 40.11 and it works. So my guess would be that something related to that Secondary Video stream is behaving differently in .11 than it was in .10. (Also, is there any way to blank secondary streams? The only way I can seem to get it blanked is with the Movie Only option, but that loses the menus too, right?)

Edit 2: I tried a Full Backup, changed the setting back to a target size of BD-25 and the encoding to Highest (just to shake things up a bit) and it still fails. The only way I can complete a backup of the Matrix with 40.11 is if I do a Movie Only backup. So far all of these attempts have been with multiple processors active. I will start another backup without the multi support and see what that does.

[AmigaFuture]

I see it. Yes it is working correctly. I'm playing it right now.

Sweet! I put a # before the MULTIPROCESS=4 and tried it with High Speed Option for testing. Nice. It functions well. I was wondering about the audio in some parts, as I didn't remember it "cutting" in and out like that in between images. I checked it with the original and same. They could have made that a bit smoother, but...Meh...it's cool. Now I'll do it at Very Slow soon. This is with 40.11.

Thanks J! I'll test "The Incredibles" tonight the same way. Another donation coming. I haven't forgotten.

[Weirdo]

I'm pretty sure the problem is in the subtitle (PGS) itself. The error within BD Rebuilder is the way it handled the problematic subtitle. If you de-select the japanese subtitle the problem should go away.It worked.

[jdobbs]

Oops, my bad. The file it was looking for isn't there. One with the same name, minus a .1 in the name, is there. I think it's the embedded secondary video, so it doesn't get blanked. It just looks a lot like the other feature video of the same time length. I kept the workfiles from the failed encode and I'm watching as it tries again to see if the same files all show up.

If this one fails as well I will try a movie only backup. Or whatever you want for a next step. :)

EDIT: I tried a Movie Only backup with 40.11 and it works. So my guess would be that something related to that Secondary Video stream is behaving differently in .11 than it was in .10. (Also, is there any way to blank secondary streams? The only way I can seem to get it blanked is with the Movie Only option, but that loses the menus too, right?)

Edit 2: I tried a Full Backup, changed the setting back to a target size of BD-25 and the encoding to Highest (just to shake things up a bit) and it still fails. The only way I can complete a backup of the Matrix with 40.11 is if I do a Movie Only backup. So far all of these attempts have been with multiple processors active. I will start another backup without the multi support and see what that does. Ok. I enabled MULTIPROCESS and was able to repeat the issue. Looks like when I removed it from secondaries I somehow didn't follow through correctly in some way. I'll get it fixed and kick out an interim release.

[laserfan]

I recently tested "American Graffiti" for DTS Express performance
I've sorta lost track of the whole "DTS Express and PIP" issue progress, and wonder if this disc can now be successfully backed-up with all U-control features intact? Secret handshake and/or INI settings needed?

[Spiraras]

Hi,

I also have encountered with The Matrix encoding in full movie backup in BD25.

The result while it has the PiP movie with audio OK it has a noticeable lip sync in the main audio. Doing a movie only backup the result is just fine.

Do you have any idea what might cause it, as you say the backup is working fine with you.

The encoding was with 40.10 (but had the same problems with the Matrix movies with older version) and I removed the DTS MA track (kept only DD 5.1).

[jdobbs]

Hi,

I also have encountered with The Matrix encoding in full movie backup in BD25.

The result while it has the PiP movie with audio OK it has a noticeable lip sync in the main audio. Doing a movie only backup the result is just fine.

Do you have any idea what might cause it, as you say the backup is working fine with you.

The encoding was with 40.10 (but had the same problems with the Matrix movies with older version) and I removed the DTS MA track (kept only DD 5.1). I would recommend you uninstall/reinstall AVISYNTH, FFDSHOW, and HAALI.

[setarip_old]

@laserfan

Hi!

50Gb backup of "American Graffiti" handles UControl/PIP/DTS Express, etc. flawlessly on SONY BDP S360 standalone player...

[AmigaFuture]

Testing completed with "The Matrix" and "The Incredibles" with MULTIPROCESS disabled for both. That did it for Full Backup. I'm going to try Edited but I have a good feeling about it so... I've not noticed any sync challenges with my testing.

[jdobbs]

Testing completed with "The Matrix" and "The Incredibles" with MULTIPROCESS disabled for both. That did it for Full Backup. I'm going to try Edited but I have a good feeling about it so... I've not noticed any sync challenges with my testing.

My sync is fine as well... I'm working on the MULTIPROCESS issue.

[laserfan]

50Gb backup of "American Graffiti" handles UControl/PIP/DTS Express, etc. flawlessly on SONY BDP S360 standalone player...
Thank you. :)

[setarip_old]

@laserfan Thank you.As always, my pleasure ;>}

[Spiraras]

I would recommend you uninstall/reinstall AVISYNTH, FFDSHOW, and HAALI.

Did that and updated DB-RB to version 40.11.
However now the encoding failed.

- [21:24:56] Reencoding: VID_00000, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.11 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set incorrectly: [0]
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[21:25:57] - Failed video encode, aborted

Is this related with the MULTIPROCESS issue discussed above?

[Ch3vr0n]

Well you're VC-1 codec isn't set properly for starters

[jdobbs]

Did that and updated DB-RB to version 40.11.
However now the encoding failed.



Is this related with the MULTIPROCESS issue discussed above?

No. MULTIPROCESS isn't normally set -- and can only be enabled by a hidden setting.

You need to follow (exactly) the setup instructions in the first post of this thread.

Also, how are you testing? You need to test in a standalone player -- as different computers and software players can often create issues of their own (including sync issues). BD-RB will always process exactly the same with the same settings -- if you're getting sync issues and others (like me) are not, it points to a system or configuration issue.

[Capsbackup]

I am curious as to why, if I load the same Blu-ray into two seperate instances of BD-RB as a full backup, setting one to BD-25 and the other to BD5, there are less available playlists/VID_***** shown and available to blank (warnings an extras, etc...) for the BD5 than the BD25. :confused:
I would think the BD5 would need to reencode all VID_***** files to make it AVCHD compatible, thus show all titles. But it is the opposite, the BD-25 shows all titles, including the warnings which I want to blank. When I select BD5 as my output, several titles disappear from BD-RB stream list/view. :(

[jdobbs]

I am curious as to why, if I load the same Blu-ray into two seperate instances of BD-RB as a full backup, setting one to BD-25 and the other to BD5, there are less available playlists/VID_***** shown and available to blank (warnings an extras, etc...) for the BD5 than the BD25. :confused:
I would think the BD5 would need to reencode all VID_***** files to make it AVCHD compatible, thus show all titles. But it is the opposite, the BD-25 shows all titles, including the warnings which I want to blank. When I select BD5 as my output, several titles disappear from BD-RB stream list/view. :(

Are you sure? I've never seen that. A BD-5 has to reencode everything (because of lower MAX_BITRATE values), except for minor exeptions... while a BD-25 doesn't. So that would seem to be backwards. Can you provide me with an example disc where that happens?

[Capsbackup]

Are you sure? I've never seen that. A BD-5 has to reencode everything (because of lower MAX_BITRATE values), except for minor exeptions... while a BD-25 doesn't. So that would seem to be backwards. Can you provide me with an example disc where that happens?

Yes I am sure. Just testing Mirror Mirror now.
First with BD25, 14 titles are displayed. If I switch output to BD5, only 9 titles are displayed.

[jdobbs]

Yes I am sure. Just testing Mirror Mirror now.
First with BD25, 14 titles are displayed. If I switch output to BD5, only 9 titles are displayed. I'll check it out.

[Capsbackup]

I'll check it out.

Just checked several more titles and have only found one more, Chronicle, that displays this same behavior. With BD25 selected there is 107 titles viewed. With BD5 there is 101 titles.

[jdobbs]

Just checked several more titles and have only found one more, Chronicle, that displays this same behavior. With BD25 selected there is 107 titles viewed. With BD5 there is 101 titles. I just tested "Mirror Mirror". I see 9 titles in the list for BD-25 and only 4 are displayed for BD-5 -- which is how is should work.

So I'm confused. Are you using any special settings?

[Edit]

Ok, I set MIN_M2TS_SIZE=0 and now it is acting as you've indicated. I'll have to review the code and see what's up.

[Edit again]

I see now. On BD-5/9 I have a minimum size set to 10MB that isn't variable. But the minimum for BD-25 can be changed (e.g. set to zero) via hidden option. I'll have to do some looking -- I'm pretty sure I used that number in BD-5/9 because it wasn't really necessary to go any smaller and still stay compliant. I'm guessing it's because the size of the VBV buffer made it unnecessary, but I'll have to go back and check my notes. If so I should probably do the same as a minimum for BD-25...

Either way, one or the other will change.

[Capsbackup]

I have had Blu-rays that I have been unable to blank warnings before when backing up to BD5/9 since they do not show up for blanking. They are usually very small files, less than 1 MB. This would explain why. :(
I prefer to blank any and all of these small files that make up the various warnings, adverts, etc... with BD-RB. However, for the ones that I was not able to because they are not listed, I end up using multiAVCHD. It would be a bonus to eliminate that extra step and only use BD-RB! :cool: :D

[jdobbs]

I have had Blu-rays that I have been unable to blank warnings before when backing up to BD5/9 since they do not show up for blanking. They are usually very small files, less than 1 MB. This would explain why. :(
I prefer to blank any and all of these small files that make up the various warnings, adverts, etc... with BD-RB. However, for the ones that I was not able to because they are not listed, I end up using multiAVCHD. It would be a bonus to eliminate that extra step and only use BD-RB! :cool: :D I've modified it for the next release so that any MIN_M2TS_SIZE value that is less than the default for BD-5/9 will cause it to be lowered as well. So setting it to zero would list everything no matter what target size is selected.

[Capsbackup]

I've modified it for the next release so that any MIN_M2TS_SIZE value that is less than the default for BD-5/9 will cause it to be lowered as well. So setting it to zero would list everything no matter what target size is selected.

Excellent!! :) :thanks:

[mscsmyrpln]

I've modified it for the next release so that any MIN_M2TS_SIZE value that is less than the default for BD-5/9 will cause it to be lowered as well. So setting it to zero would list everything no matter what target size is selected.

Does this mean Custom Size targets will also respond to MIN_M2TS_SIZE values < 10?

Thank you.

[jdobbs]

Does this mean Custom Size targets will also respond to MIN_M2TS_SIZE values < 10?

Thank you. I assume you mean less than 10MB. The answer is yes.

[Sharc]

Not yet. I'm still constrained by other work. I looked at it quickly and didn't find anything. I'll work on it for the next release.
Just curious: did you find anything?

[cyberdoggy]

Can someone clue me in please, this just started happening and I have no idea why it will not work with any movie all of a sudden. Running Windows 7 x64. If everything is ok why does it stop?

18:03:45] PHASE ONE, Encoding
- [18:03:45] Processing: VID_00009 (1 of 1)
- [18:03:45] Extracting A/V streams [VID_00009]
- [18:25:18] Reencoding video [VID_00009]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 176,281 frames
- Bitrate: 4,027 Kbs
- [18:25:18] Reencoding: VID_00009, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.11 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[18:25:22] - Failed video encode, aborted

[Capsbackup]

@cyberdoggy;
Probably another program update has changed your ffdshow settings or has taken priority, even though "Inspect" says Ok.
Uninstall ffdshow, haali and avisynth. Reboot. Install those programs again.
All should be well again. :cool:

[cyberdoggy]

@cyberdoggy;
Probably another program update has changed your ffdshow settings or has taken priority, even though "Inspect" says Ok.
Uninstall ffdshow, haali and avisynth. Reboot. Install those programs again.
All should be well again. :cool:

Believe it or not I reinstalled my whole operating system thinking that, and then just installed BD Rebuilder step by step with the directions at the top of this thread, even installed the software directly downloaded from the links on the thread. Basically all that is isntalled is BD Rebuilder so that cannot be the issue. I even right clicked and started the app from admin and let BD setup correctly, So I am completely lost now...

[Chuckwagon]

Believe it or not I reinstalled my whole operating system thinking that, and then just installed BD Rebuilder step by step with the directions at the top of this thread, even installed the software directly downloaded from the links on the thread. Basically all that is isntalled is BD Rebuilder so that cannot be the issue. I even right clicked and started the app from admin and let BD setup correctly, So I am completely lost now...

Are you overclocked in any way? Are you using any hidden options in BD, such as the multi-process feature, or is it totally default? What is your source, disc, image, etc.?

Don't know if any of those will make a difference, but it's worth asking. :)

[cyberdoggy]

Are you overclocked in any way? Are you using any hidden options in BD, such as the multi-process feature, or is it totally default? What is your source, disc, image, etc.?

Don't know if any of those will make a difference, but it's worth asking. :)

It seems to be happening on any disk and everything is stock factory settings, no overclocking and i'm using Movie only mode DVD5 setting. As far as hidden settings I never even go to that section and change anything I leave it as it is when I install it.

[RobertM]

i'm using Movie only mode DVD5 setting

Does the same thing happen if you select BD-25?

[cyberdoggy]

Does the same thing happen if you select BD-25?

Did this when I tried BD25...

- Input BD size: 34.12 GB
- Approximate total content: [02:02:32.386]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[16:59:13] PHASE ONE, Encoding
- [16:59:13] Processing: VID_00009 (1 of 1)
- [16:59:13] Extracting A/V streams [VID_00009]
- [17:17:49] Reencoding video [VID_00009]
- [17:17:49] Keeping original video (no reencode)
- [17:17:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[17:17:49]PHASE ONE complete
[17:17:49]PHASE TWO - Rebuild Started
- [17:17:49] Rebuilding BD file Structure
- Failed in attempt to multiplex: MUX_MOVIE_ONLY.meta
- Pes packet len too large ( >100Mb). Bad stream or invalid codec speciffed.
[17:17:56] - Failed to REBUILD

[jdobbs]

Please don't edit the logs before posting. All that header information is there so it can help find issues...

[cyberdoggy]

Please don't edit the logs before posting. All that header information is there so it can help find issues...

Full Log...

----------------------
[07/30/12] BD Rebuilder v0.40.11 (beta)
[19:54:01] Source: INDIANA_JONES_4_D1
- Input BD size: 34.12 GB
- Approximate total content: [02:02:32.386]
- Target BD size: 4.36 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[19:54:03] PHASE ONE, Encoding
- [19:54:03] Processing: VID_00009 (1 of 1)
- [19:54:03] Extracting A/V streams [VID_00009]
- [20:25:11] Reencoding video [VID_00009]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 176,281 frames
- Bitrate: 4,027 Kbs
- [20:25:11] Reencoding: VID_00009, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.11 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[20:25:13] - Failed video encode, aborted

[busch42]

cyberdoggy, I had the same problem, After about a month I realized it was my computer overheating, Try installing HDMonitor and see what your temps are.

[jdobbs]

I've updated the first post of this thread with a link to the latest release of BD-RB (v0.41.01). Changes for this release:- Fixed a fatal error that can occur when MULTIPROCESS
is used in conjunction with sources that include
secondary streams.
- Corrected an issue in which very small segments of
a multi-part source could unnecessarily prompt with
annoying "oversize" warnings.
- Added chapter support for MP4 ALTERNATE output. It
is enabled by default. To disable MP4 chapters, set
add the new hidden option MP4_CHAPTERS=0.
- Added some additional features to the ALTERNATE
output and type definition modules.
- Modified processing of MIN_M2TS_SIZE (hidden value)
so that it also affects BD-5/9 (as long as it is
smaller than the BD-5/9 default).
- Corrected issues in which some important values were
not being maintained when saving and loading from a
project file (File Menu).
- Added the MPLS (playlist) number to the title section
of the stream list when MOVIE-ONLY mode is selected.
This is to avoid confusion as to which playlist is
active at any point in time. The playlist number
is also now displayed as a part of the batch list.
- Corrected a problem in which, under certain unusual
conditions on a 7.1 source -- the wrong channels
might be used for the rear speakers when converting
to AC3.

[soneca]

BD Rebuilder v0.41.01 (beta)

Thank you!;)

[Wizzu]

latest release of BD-RB (v0.41.01).Thanks jdobbs :)

[AmigaFuture]

Hi. When I have BD-RB reencoded with Full Backup and Quicker encode for Extras it plays fine with PowerDVD 12 and my LG Player. When reencoded with Movie and Menus (Auto blank extras) but uncheck blank for extras I want kept and Quicker encode on, the log shows everything went well but PowerDVD 12 seems to get stuck (in a loop?) and doesn't shows anything from the hard drive location after it flashes the "Touchstone" logo, however my LG player will play.

Something to consider.

[08/02/12] BD Rebuilder v0.41.01 (beta)
[22:29:29] Source: DEAD_POETS_SOCIETY
- Input BD size: 29.33 GB
- Approximate total content: [03:14:59.070]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE and MENUS mode enabled
- Quality: High-Speed Option (BD-25), Two Pass
- Decoding/Frame serving: DirectShow [4-way]
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[22:29:30] PHASE ONE, Encoding
- [22:29:30] Blanking: VID_00024 (1 of 23)
- [22:29:30] Blanking: VID_00043 (2 of 23)
- [22:29:30] Blanking: VID_00030 (3 of 23)
- [22:29:30] Blanking: VID_00042 (4 of 23)
- [22:29:30] Blanking: VID_00063 (5 of 23)
- [22:29:30] Blanking: VID_00029 (6 of 23)
- [22:29:30] Blanking: VID_00215 (7 of 23)
- [22:29:31] Blanking: VID_00062 (8 of 23)
- [22:29:31] Blanking: VID_00025 (9 of 23)
- [22:29:31] Blanking: VID_00061 (10 of 23)
- [22:29:31] Blanking: VID_00014 (11 of 23)
- [22:29:31] Blanking: VID_00035 (12 of 23)
- [22:29:31] Blanking: VID_00032 (13 of 23)
- [22:29:31] Blanking: VID_00034 (14 of 23)
- [22:29:31] Blanking: VID_00033 (15 of 23)
- [22:29:31] Blanking: VID_00031 (16 of 23)
- [22:29:31] Blanking: VID_00006 (17 of 23)
- [22:29:31] Processing: VID_00004 (18 of 23)
- [22:29:31] Extracting A/V streams [VID_00004]
- [22:29:36] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 720x480
- Rate/Length: 29.970fps, 4,991 frames
- [22:29:36] Reencoding: VID_00004, Pass 1 of 1
- [22:29:50] Video Encode complete
- [22:29:50] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [22:29:50] Multiplexing M2TS
- [22:29:55] Processing: VID_00001 (19 of 23)
- [22:29:55] Extracting A/V streams [VID_00001]
- [22:30:07] Reencoding video [VID_00001]
- Source Video: MPEG-4 (AVC), 720x480
- Rate/Length: 29.970fps, 14,320 frames
- [22:30:07] Reencoding: VID_00001, Pass 1 of 1
- [22:30:42] Video Encode complete
- [22:30:42] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [22:30:42] Multiplexing M2TS
- [22:30:49] Processing: VID_00002 (20 of 23)
- [22:30:49] Extracting A/V streams [VID_00002]
- [22:31:02] Reencoding video [VID_00002]
- Source Video: MPEG-4 (AVC), 720x480
- Rate/Length: 29.970fps, 19,756 frames
- [22:31:02] Reencoding: VID_00002, Pass 1 of 1
- [22:31:47] Video Encode complete
- [22:31:47] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [22:31:47] Multiplexing M2TS
- [22:31:54] Processing: VID_00003 (21 of 23)
- [22:31:54] Extracting A/V streams [VID_00003]
- [22:32:21] Reencoding video [VID_00003]
- Source Video: MPEG-4 (AVC), 720x480
- Rate/Length: 29.970fps, 26,611 frames
- [22:32:21] Reencoding: VID_00003, Pass 1 of 1
- [22:34:04] Video Encode complete
- [22:34:04] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [22:34:04] Multiplexing M2TS
- [22:34:13] Processing: VID_00005 (22 of 23)
- [22:34:13] Extracting A/V streams [VID_00005]
- [22:34:54] Reencoding video [VID_00005]
- Source Video: MPEG-4 (AVC), 720x480
- Rate/Length: 29.970fps, 48,421 frames
- [22:34:54] Reencoding: VID_00005, Pass 1 of 1
- [22:37:38] Video Encode complete
- [22:37:38] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [22:37:38] Multiplexing M2TS
- [22:37:51] Processing: VID_00000 (23 of 23)
- [22:37:51] Extracting A/V streams [VID_00000]
- [22:49:38] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 185,195 frames
- Bitrate: 21,589 Kbs
- [22:49:38] Reencoding: VID_00000, Pass 1 of 2
- [22:59:10] Reencoding: VID_00000, Pass 2 of 2
- [23:55:44] Video Encode complete
- [23:55:44] Processing audio tracks
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Reencoding audio to AC3...
- [23:59:13] Multiplexing M2TS
[00:12:02]PHASE ONE complete
[00:12:02]PHASE TWO - Rebuild Started
- [00:12:02] Rebuilding BD file Structure
[00:12:09] - Encode and Rebuild complete
[00:12:09] JOB: DEAD_POETS_SOCIETY finished.

[jdobbs]

Unfortunately "Movie and Menus" is still experimental -- at best it is a "good guess" right now. If there's JAVA in play it could be even more hit-or-miss.

[Ch3vr0n]

I can confirm that, its very often it selects streams that shouldn't be. Just this last disc i did (wrath of the titans), there's a simple picture in the background with audio running and then the menu that pops up. BDRB had selected it for blanking. When i launched the output iso i found a big black square above the menu where the picture was supposed to be, so i was forced to do a rerun (running that one atm). For once where i didn't preview every auto-selected stream, "it" does that. That goes to show it can never hurt to preview al streams. However it does what it's supposed to do on the other part, blank out all the trailer & notices crap nobody wants to watch anyway and retain full disc playability and that's what i'm after. If i have to "waste" half an hour previewing streams to get the disc to the state i want it in, so be it. It's more then worth it.

@Amiga: i think i've had that problem a couple times myself too, i usually end up doing a standard full disc backup in those cases if. With AnyDVD having stripped the UOP's (clips ya normally can't skip otherwise etc), ya can simply skip em and head straight for the menu/movie. Nothing i can't live with.

[AmigaFuture]

JDobbs, that's why I typed "Something to consider." This is bug reporting so experimental is part of that, I get that. ~Grin~

I see there's a JAR directory; now. I did notice with the warning being part of Auto Blanking, the final didn't function. Hmm.. Perhaps a clue? I don't yet get the structure of Blu-ray disks like I do mostly for DVD. So..enjoying learning.

Ch3vr0n, I've noticed it before, too. First time I've typed about it.

I know that time doesn't actually exist (not what this thread is about so, that's as far as I go here) so I don't get "concerned" with "Waste" or "Lack" of time. I may check an older/new version of AnyDVD for possible causes. The feeling I get concurs with JDobbs about Java...an area I'm still learning with Blu-ray. :D

[frank]

Full Backup of Harry Potter Philosopher ULTIMATE EDITION works (incl. PIP)
but

- you cannot activate the secondary audio stream (the last)
AUD_015 (2nd) DTS-Express, Stereo, English
Whatever language you select, the stream will not be activated. The red cross remains on selection window.
Full Backup then will play the main audio stream.

- you cannot deactivate the secondary video
VC-1, 480p, 23.976fps

Tested with 0.40.10 and 0.41.01

--------
Ok, I see: Problem is the DTS Express Codec in secondary stream...

[jdobbs]

JDobbs, that's why I typed "Something to consider." This is bug reporting so experimental is part of that, I get that. ~Grin~

I see there's a JAR directory; now. I did notice with the warning being part of Auto Blanking, the final didn't function. Hmm.. Perhaps a clue? I don't yet get the structure of Blu-ray disks like I do mostly for DVD. So..enjoying learning.

Ch3vr0n, I've noticed it before, too. First time I've typed about it.

I know that time doesn't actually exist (not what this thread is about so, that's as far as I go here) so I don't get "concerned" with "Waste" or "Lack" of time. I may check an older/new version of AnyDVD for possible causes. The feeling I get concurs with JDobbs about Java...an area I'm still learning with Blu-ray. :D I'll look into finding a reliable way of identifying streams with BD-J -- and not blank those.

Hmm... but I've always heard that time is money... and money exists. And while money can't buy happiness, lack of money can certainly make you miserable. So, in a way, time can buy you happiness.

[jdobbs]

Full Backup of Harry Potter Philosopher ULTIMATE EDITION works (incl. PIP)
but

- you cannot activate the secondary audio stream (the last)
AUD_015 (2nd) DTS-Express, Stereo, English
Whatever language you select, the stream will not be activated. The red cross remains on selection window.
Full Backup then will play the main audio stream.

- you cannot deactivate the secondary video
VC-1, 480p, 23.976fps

Tested with 0.40.10 and 0.41.01

--------
Ok, I see: Problem is the DTS Express Codec in secondary stream... I've really spent a lot of time trying to figure out what it is that some players don't like about the way I'm remuxing DTS-Express.

[Capsbackup]

I've really spent a lot of time trying to figure out what it is that some players don't like about the way I'm remuxing DTS-Express.

Also, at least with some, maybe most, standalone players you need to set the players audio setup to "mixed" (Sony's) to even be able to play and hear the secondary audio for the PiP option. :(

[AmigaFuture]

I'll look into finding a reliable way of identifying streams with BD-J -- and not blank those.

Hmm... but I've always heard that time is money... and money exists. And while money can't buy happiness, lack of money can certainly make you miserable. So, in a way, time can buy you happiness.

BD-J: Cool. I've noticed the same [was] happening with multiAVCHD though I haven't checked the newest incarnation. I didn't attribute it to Java...hmm..

Our lives are about abundance yet what Has been taught/passed for generations/tradition (after about ages 5-7) most parents start teaching away from it...from Their parents lessons. That's a very flawed way of viewing Reality and it keeps abundance (Well-Being) from coming in (Much more depth there..then I'll share here). I've switched from Things Make Me Happy to Happy Before I get stuff and focus on appreciation of what I have and am creating (MUST remain Focused)...with great appreciation for contrast. 0 regrets/excuses, and a massive love of Life. The Secret (1st edition, best one) was my catalyst of major change; away from The Matrix (the Trilogy is about it, but missing some info..), I became very aware of some of my sloppy creations. Very skeptical...but I kept with it (Nudges). Woah..extremely cool!! Check into Abraham-Hicks (Ask, and It Is Given; The Vortex..) for further info if you like. My recent donation is part of those changes. :D You replied, so..respectfully, so did I. :D Anything more should probably be in a PM.

[Maverick Enigma]

Jdobbs:

First of, thank you for this great app! I have used several video encoding app, but so far, yours tops them all in term of simplicity and performance!

About the bug, it seems like fixed_crf paramter is not applied correctly. From what I understand, the smaller the fixed_crf value, the bigger the size of the movie. But no matter what fixed_crf values i set, the sizes of the reencoded movies are the same. Other settings are: Custom Target Size (####), High Quality, One Pass (CRF) encoding. I also notice that the size of the movie only goes down, when I set the Custom Target Size to a really small value (1000). Increasing Custom Target Size has no effect on the size.
I first noticed this in v.40.xx, but it could have happened even before that.

[jdobbs]

Jdobbs:

First of, thank you for this great app! I have used several video encoding app, but so far, yours tops them all in term of simplicity and performance!

About the bug, it seems like fixed_crf paramter is not applied correctly. From what I understand, the smaller the fixed_crf value, the bigger the size of the movie. But no matter what fixed_crf values i set, the sizes of the reencoded movies are the same. Other settings are: Custom Target Size (####), High Quality, One Pass (CRF) encoding. I also notice that the size of the movie only goes down, when I set the Custom Target Size to a really small value (1000). Increasing Custom Target Size has no effect on the size.
I first noticed this in v.40.xx, but it could have happened even before that. I've been using is quite a bit in testing lately -- it's working for me. The way to check is to look at LASTCMD.TXT (in the BD-RB folder) while the encode is executing. If it is working right you'll see "-crf xx" in the command line (xx will equal the fixed value you've used). Something to note: BD-RB does not accept a value less than 10, and will disable fixed_crf with any specified value that is smaller -- so it may be possible that's your issue. Generally a value of 18-20 will give you a result that is identical to the original, so anything less than 10 would be a waste anyway.

[Fozziedd2]

Did something more radical change with the latest version 4101? Everytime I start off with BD Rebuilder, it locks and closes. I updated this version as I always do, but something seems to be different... Any thoughts or other reports?

[jdobbs]

Did something more radical change with the latest version 4101? Everytime I start off with BD Rebuilder, it locks and closes. I updated this version as I always do, but something seems to be different... Any thoughts or other reports? Nope... you're the only report of any issue like that. Sounds like something else in your system, but I can't really tell without more details. What do you mean by "locks and closes"? The two seem to be mutually exclusive.

[steveg32]

I've backed up MIB. It's been a long time, though.

v0.41.01, "Men In Black (#1)", Full Backup was no problem to BD-25, but unable to backup as Movie-Only Backup>Alternate Movie-Only Output (DVD-5). Tried both available Playlists (016 Chapters). This is the 1st & only time this has ever happened.

@jdobbs, can you duplicate? Sorry but I deleted all ini files, etc.

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.41.0.1, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

Mahalo brah :)

[jdobbs]

v0.41.01, "Men In Black (#1)", Full Backup was no problem to BD-25, but unable to backup as Movie-Only Backup>Alternate Movie-Only Output (DVD-5). Tried both available Playlists (016 Chapters). This is the 1st & only time this has ever happened.

@jdobbs, can you duplicate? Sorry but I deleted all ini files, etc.

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.41.0.1, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

Mahalo brah :) I'll see what I can find...

[AmigaFuture]

Since the last 2 versions BD-RB hasn't crashed while I've un/blanked, changed settings, etc. The older versions crashed sometimes just after I made some change to settings. 7 64-bit. Program stability seems good with my machine.

[Ch3vr0n]

41.01 runs just fine here too. Just finished 2 encodes with it. Wrath of the titans (menu's & movie) and battleship (full disc backup)

[k-c-ksum]

just got around to backing up FATF again. The secondary video is now progressive :)

[rippn]

Getting this error:

[23:08:36]PHASE TWO - Rebuild Started
- [23:08:36] Rebuilding BD file Structure
- [23:08:53] CorrectMPLS() 00009 2408
[05:51:28] - Aborted at user request

Any suggestions?

[Ch3vr0n]

Getting this error:

[23:08:36]PHASE TWO - Rebuild Started
- [23:08:36] Rebuilding BD file Structure
- [23:08:53] CorrectMPLS() 00009 2408
[05:51:28] - Aborted at user request

Any suggestions?

Euhm ye, post the rest of the logfile, not a 4 line segment. The info in the logfile is there for a reason.

[Maverick Enigma]

I've been using is quite a bit in testing lately -- it's working for me. The way to check is to look at LASTCMD.TXT (in the BD-RB folder) while the encode is executing. If it is working right you'll see "-crf xx" in the command line (xx will equal the fixed value you've used). Something to note: BD-RB does not accept a value less than 10, and will disable fixed_crf with any specified value that is smaller -- so it may be possible that's your issue. Generally a value of 18-20 will give you a result that is identical to the original, so anything less than 10 would be a waste anyway.

I checked the lastcmd.txt and the crf value is there, but it still did not apply correctly. While messing around, I moved the fixed_crf parameter to the end of the ini file, and it stared working :) However, it looks like the encoded movie's size depends on the value set in Custom Target Size when fixed_crf is set to 15.

Org. size: 24.4GB
Fixed_crf: 18
Custome target size: 43000MB
Encoded size: 4.83GB

Org. size: 24.4GB
Fixed_crf: 18
Custome target size: 1000MB
Encoded size: 4.83GB

Org. size: 24.4GB
Fixed_crf: 15
Custome target size: 43000MB
Encoded size: 7.3GB

Org. size: 24.4GB
Fixed_crf: 15
Custome target size: 1000MB
Encoded size: 6.92GB

Any idea? :)

[jdobbs]

Getting this error:

[23:08:36]PHASE TWO - Rebuild Started
- [23:08:36] Rebuilding BD file Structure
- [23:08:53] CorrectMPLS() 00009 2408
[05:51:28] - Aborted at user request

Any suggestions? I just looked in that routine -- and, while I can't be positive, it appears your MPLS might be corrupted. Error 9 means there is a subscript is out-of-range, and the subscript offset referenced there is taken directly from the MPLS file.

What disc are you attempting?

[jdobbs]

I checked the lastcmd.txt and the crf value is there, but it still did not apply correctly. While messing around, I moved the fixed_crf parameter to the end of the ini file, and it stared working :) However, it looks like the encoded movie's size depends on the value set in Custom Target Size when fixed_crf is set to 15.

Org. size: 24.4GB
Fixed_crf: 18
Custome target size: 43000MB
Encoded size: 4.83GB

Org. size: 24.4GB
Fixed_crf: 18
Custome target size: 1000MB
Encoded size: 4.83GB

Org. size: 24.4GB
Fixed_crf: 15
Custome target size: 43000MB
Encoded size: 7.3GB

Org. size: 24.4GB
Fixed_crf: 15
Custome target size: 1000MB
Encoded size: 6.92GB

Any idea? :) The only way I can see that that "moving to the end of the line" can make a difference is if you are using command line tweaks that are overriding the CRF command. It can't be using something else to determine size... the CRF is what does that. If it is in the command line -- it is being used. It can be affected, though, by the quality settings. Generally an identical CRF will result in a smaller output if you change from "Fast", for example, to "High Quality" mode.

[kristian65]

Sorry if this question is in wrong place but i cant find what im looking for.

I read a while ago that there was a hidden option in BD-RB so u could blank out certain files.
Like if i choose full backup but black out all the extras and just keep the movie and the menu.

Tanx for any help

[jdobbs]

Sorry if this question is in wrong place but i cant find what im looking for.

I read a while ago that there was a hidden option in BD-RB so u could blank out certain files.
Like if i choose full backup but black out all the extras and just keep the movie and the menu.

Tanx for any help Read this post (http://forum.doom9.org/showthread.php?p=1526277&highlight=enable_test%27#post1526277) for detail.

[aneurysm]

hi,

been using your software in combination with multiavchd for over 2 years ago. Multiavchd to remove some extra's, or transcode them to 720p and to sometimes add audio or subtitles.
In those 2 years .. never a problem.

Now the last week, I've had 3 discs that after I put them through multiavchd, I get the 2501 error "disc is not blu ray structure". Which I find so weird ... since all files & dirs are there.

Is there anything I can do / to check why certain discs after multiavchd don't open in bd rebuilder ?

Just to mention :
- the full blu ray's open & recode perfectly in bd rebuilder so it's no problem with the original rip.
- with the discs with a problem I've tried at least 2 times with multiavchd to remake the disc to make sure it didn't go bad or something.
- The 3 discs I had a problem with after going through multiavchd were 101 Dalmatians; Aliens (which I found very weird because it's structure is 100% like Alien with which I had no problems) & Vampire Diaries S1D4

tnx in advance for some pointers or tips

[kristian65]

Read this post (http://forum.doom9.org/showthread.php?p=1526277&highlight=enable_test%27#post1526277) for detail.

tanx so much for ur help

[Ch3vr0n]

hi,

been using your software in combination with multiavchd for over 2 years ago. Multiavchd to remove some extra's, or transcode them to 720p and to sometimes add audio or subtitles.
In those 2 years .. never a problem.

Now the last week, I've had 3 discs that after I put them through multiavchd, I get the 2501 error "disc is not blu ray structure". Which I find so weird ... since all files & dirs are there.

Is there anything I can do / to check why certain discs after multiavchd don't open in bd rebuilder ?

Just to mention :
- the full blu ray's open & recode perfectly in bd rebuilder so it's no problem with the original rip.
- with the discs with a problem I've tried at least 2 times with multiavchd to remake the disc to make sure it didn't go bad or something.
- The 3 discs I had a problem with after going through multiavchd were 101 Dalmatians; Aliens (which I found very weird because it's structure is 100% like Alien with which I had no problems) & Vampire Diaries S1D4

tnx in advance for some pointers or tips

Running a disc through multiavchd and then through BDRB is a preprocessed disc and excludes you from bugreports according to jdobbs. Run the source through bdrb First and then through multi. And for the record, bdrb can blank out features too.



Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[aneurysm]

aah sorry .. didn't know about the exclusion.
Apologies.

and yes I can do what you say, problem is a bit trial & error then that BD RB doesn't oversize then for adding the audio.

[jdobbs]

aah sorry .. didn't know about the exclusion.
Apologies.

and yes I can do what you say, problem is a bit trial & error then that BD RB doesn't oversize then for adding the audio. Gotta be some setting you've changed in multiAVCHD. I use it all the time as a preprocessor and have no issues at all.

With that said -- a preprocessed source can't be accepted for bug reports. Experience has shown that 99% of the time the error is caused by the preprocessing.

[aneurysm]

ok, I understand that. i'll do some more testing, but I haven't changed anything on this PC software or settings for a long time.

only thing I installed recently is VLC media player

anyways, keep up the great program !

[HandiA]

Since installing the latest version of BD Rebuilder v0.41.01, All my backups have the audio converted from DTS HD Master Audio to just DTS.

[ihmcjacky]

For the latest version of bd-rebuilder, I still facing the following 2 problems

1) - [21:44:16] CopyDirStructure() 00052 1200
- [21:44:18] CopyDirStructure() 00052 1200

when the file encoding and rebuilding is nearly finished, (I am sure the original file works fine)

2) [BD Rebuilder an error 2501][Selected source is not BD format] appears if the language and region is not set to English

Thanks for the attention

[jdobbs]

Since installing the latest version of BD Rebuilder v0.41.01, All my backups have the audio converted from DTS HD Master Audio to just DTS.You decide how they will be handled from the SETUP menu. Just select "Keep HD audio for BD-25". If you are backing up to BD-5 or BD-9 you can't keep HD audio -- they are too big for the disc.

I'll reemphasize a point that has been made here before, though. While it is up to you what you want to keep -- HD audio is all hype anyway. Double-blind tests have proven that the human ear can't detect it... many think they can hear a difference -- but scientific studies show that it is all psychological. I personally believe it is a waste of space that could be more effectively used for improving video quality. Just a thought...

[JJB]

[QUOTE=beachwhale;1586929]while running hunger games I got an error here is the log

----------------------
[08/06/12] BD Rebuilder v0.41.01 (beta)
[08:57:58] Source: THE_HUNGER_GAMES_2012_1080P_BLU-RAY_AVC_DTS-HD_MA_7.1-HDC

Man, that is one weird lookin' title..:rolleyes: just sayin......

[laserfan]

while running hunger games I got an error here is the log

----------------------
[08/06/12] BD Rebuilder v0.41.01 (beta)
[08:57:58] Source: THE_HUNGER_GAMES_2012_1080P_BLU-RAY_AVC_DTS-HD_MA_7.1-HDC

Man, that is one weird lookin' title..:rolleyes: just sayin......
It amazes me that there are ISPs that accommodate downloads of this size. And no wonder the Internet is so slow what with this activity as well as legal streaming.

[Ch3vr0n]

Lolz, he edited his post to make it look like a legit disc. Praise the power of quotes. @beachwhale: urs is not a retail disc with that volume name and highly likely altered in some way, hence ur excluded from bug reports. Get a real copy and not a downloaded one.

[AmigaFuture]

It amazes me that there are ISPs that accommodate downloads of this size. And no wonder the Internet is so slow what with this activity as well as legal streaming.

Hi. The Internet was intended to be Open to the Public, Not to be censored or controlled. It Will Stay that way! Otherwise, it's like removing a bit of Freedom of Choice and that isn't cool to me at all. If you're getting slower speeds, it's not because of what others are downloading...check your hardware and ISP. Size of data should never matter to an ISP...that's not their job...nor should it ever be to censor or regulate. That's a parents role...more to the point, Each Persons responsibility/choice.

Consider streaming from Netflix with Full Quality enabled (HD) in your profile and there are 4 people in a Family that watch something different a lot...that could be considered a lot of data..that's not "illegal"...just 1 example of many. :D

Whew..okay..enough of my Very Strong feelings on that subject...back to BD-RB.

[AmigaFuture]

HD audio is all hype anyway. Double-blind tests have proven that the human ear can't detect it...

It's also been shown that some people in vibrational alignment with dog whistles or other pitches can hear them. As well as doing other ?impossible? things. Quantum science is pretty cool. Stan Lee's "Superhumans" is an awesome show about our abilities and possibilities.

[Audiophile1178]

JDOBBS, I don't know if you received Star Trek TNG yet. I just did the first disc using manual blanking to blank out the first disc so that half of the episodes were to be put on one BD-25 disc and the other half on another BD-25 disc to keep the quality super high. On the first disc BDRebuilder associated "Encounter at Farpoint" as itself and linked "The Naked Now" and "Code of Honor" together. This was fine as it allowed me to put "Encounter at Farpoint" on one disc and the other two on another with hardly any loss of quality.

Everything worked out great and i'm super happy with the transfers that was done EXCEPT for audio problems (that has nothing to do with BDRebuilder) which will get fixed with a replacement disc.


Now, I'm doing disc two and BDRebuilder, from what I can tell, is using 00000.mpls which links ALL of the episodes together so when I go to blank ANY episode they ALL get blanked. I've used BDinfo to look at the mpls structure and 00000.mpls links all of the episodes together but 00001.mps-00005.mpls each are associated with their own individual episode. Is there any way to fix this so that I can put 2 episodes on one disc and 3 on another? Or maybe 2 episodes on one disc, 2 on another, and 1 on its own? My goal is to keep the menus and everything but just blank the episodes that i'm not interested in as I did on the first disc that came out great.

Thanks for your continuing support as this is my first time ever using blanking!

edit: I just realized something. The main menu has a play all button which probably calls 00000.mpls but if click on the episodes button it'll allow you to play each one seperately which will then call the appropriate .mpls from 00001.mps-00005.mpls to play the correct episode.

[jdobbs]

Yes, I bought the STNG S1 Blu-ray collection. It's not perfect, there is some annoyin graininess in some of the episodes -- but I like it none-the-less. I've also created a special backup collection from it that is expanded to 16:9. Cool.

The problem is: Sometimes discs are created so that individual episodes can be played alone -- or they can be played one-after-the-other (in a different playlist). There is no way I know of to distinguish a playlist made up of several different standalone episodes from a playlist that is simply different parts combined together to form one feature.

If I allow blanking parts of a playlist (rather than all of it) I'll get inundated with bug reports about movies that are missing parts.

[Audiophile1178]

JDOBBS, thanks for the quick response. I'm not sure if you totally understood my edit response. You wouldn't need to blank parts of a playlist. The disc contains all the playlists neccessary to get it done. The thing is BDRebuilder is selecting the 00000.mpls which includes all the episodes in it. If I could have BDrebuilder select a different playlist, for example any of the playlists from 00001.mpls-00005.mpls which contain the individual episodes, so when BDRebuilder reads the disc that'll fix the problem and allow me to blank it properly. If you look at the disc in BDinfo you'll see what I mean.

Forgive me and my ignorance as I know nothing about Blu-ray structures which is why i'm asking you.

Alternatively, could I just replace the .m2ts files of the episodes that I don't want with your blank .m2ts file?


Update: I replaced the .m2ts files for the episodes that I don't want with your blanking .m2ts file from a previous encode and replaced the appropriate .clpi files (from the blanked .clpi that you provided) that corresponding to the blanked file. I then used BDedit to edit the .mpls files that I needed and it all looks good in PowerDVD. The hardest part was editing the playlist that played all the episodes and only have it include the two episodes that I kept. I quickly found out how to do it. It worked great and played just like the Disc 1 that I did with BDRebuilder. The only thing is that in BDinfo it still shows the file as having all the different languages, as well as, subtitles but it doesn't seems to effect the way it plays so I'm ok with that. I tried to edit the appropriate playlist in BDedit. I was able to fix the playback time but no matter what I did it didn't change the languages and subtitles.

I'm going to burn it to a BD-RE to test it in my OPPO before I burn it to a BD-R disc and do the other half of the disc.

Update on Update: It took an hour to burn to BD-RE but when it was done it played beautifully in my OPPO. I think i'm going to do the rest of the discs this way.

[jdobbs]

I've seen several comments in various posts on PredictAndEncode errors, but not the one I'm getting.

I have a captured mpg file that plays fine and is clean by TSDoctor, but when I try to shrink it with BD-RB I get the above error as soon as Reencoding starts. I've tested two RB versions (0.39.01 and 0.39.02) and get the same error. I've successfully used BD-RB with similar files in the past so why it's happening now is a mystery (at least to me).

:confused:
Thoughts?

...

Here's the log file:

[14:34:29] BD Rebuilder v0.39.02 (beta)
- Source: AVCHD
- Input BD size: 4.16 GB
- Approximate total content: [00:42:26.725]
- Target BD size: 1.17 GB
- Windows Version: 5.1 [2600]
- Quality: High Quality (Default), Two Pass
- Audio Settings: AC3=0 DTS=1 HD=1 Kbs=640
[14:34:30] PHASE ONE, Encoding
- [14:34:30] Processing: VID_00000 (1 of 1)
- [14:34:30] Extracting A/V streams [VID_00000]
- Extracting video streams [VID_00000]
- Extracting audio streams [VID_00000]
- [14:38:10] Reencoding video [VID_00000]
- [14:38:10] PredictAndEncode() 00006 2803
[14:52:27] - Aborted by user request It's been a few months since this was posted, but I ran into this error recently while testing and thought I'd post an answer.

You get this error when the source stream was encoded at a framerate that is not allowed in Blu-ray. Acceptable framerates are: 23.976, 24, 25, 29.97, 50, 59.94 -- even then some are only compliant with certain frame sizes.

This is one more example of why I don't accept bug reports on preprocessed sources -- but I'll change the code so the source will be rejected rather than failure at this point.

[hifreak]

I tried to encode Jaws first I used Dvdfab to remove protection and then in BD Rebuilder to encode. The movie is DTS HD 7.1, but when it is finished in BD Rebuilder it is DTS HD 5.1. Have I done something wrong in my settings?

Settings:

MODE=2
ENCODE_QUALITY=2
AUTO_QUALITY=0
TARGET_SIZE=23500
VERSION=0.41.0.1
AUTO_BURN=2
ONEPASS_ENCODING=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=23500

Rebuild:

[08-15-12] BD Rebuilder v0.41.01 (beta)
[07:20:38] Source: JAWS PLAYLIST_00000
- Input BD size: 29,77 GB
- Approximate total content: [02:03:54.635]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[07:20:40] PHASE ONE, Encoding
- [07:20:40] Processing: VID_50309 (1 of 1)
- [07:20:40] Reencoding video [VID_50309]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 178.253 frames
- Bitrate: 22.933 Kbs
- [07:20:40] Reencoding: VID_50309, Pass 2 of 2
- [13:51:36] Video Encode complete
- [13:51:36] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[13:51:36]PHASE ONE complete
[13:51:36]PHASE TWO - Rebuild Started
- [13:51:36] Rebuilding BD file Structure
[14:10:46] - Encode and Rebuild complete
[14:10:46] Writing BD structure to ISO file
- ImgBurn completed successfully
[14:29:20] JOB: JAWS finished.

[aneurysm]

I tried to encode Jaws first I used Dvdfab to remove protection and then in BD Rebuilder to encode. The movie is DTS HD 7.1, but when it is finished in BD Rebuilder it is DTS HD 5.1. Have I done something wrong in my settings?

Settings:

MODE=2
ENCODE_QUALITY=2
AUTO_QUALITY=0
TARGET_SIZE=23500
VERSION=0.41.0.1
AUTO_BURN=2
ONEPASS_ENCODING=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=23500

Rebuild:

[08-15-12] BD Rebuilder v0.41.01 (beta)
[07:20:38] Source: JAWS PLAYLIST_00000
- Input BD size: 29,77 GB
- Approximate total content: [02:03:54.635]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[07:20:40] PHASE ONE, Encoding
- [07:20:40] Processing: VID_50309 (1 of 1)
- [07:20:40] Reencoding video [VID_50309]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 178.253 frames
- Bitrate: 22.933 Kbs
- [07:20:40] Reencoding: VID_50309, Pass 2 of 2
- [13:51:36] Video Encode complete
- [13:51:36] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[13:51:36]PHASE ONE complete
[13:51:36]PHASE TWO - Rebuild Started
- [13:51:36] Rebuilding BD file Structure
[14:10:46] - Encode and Rebuild complete
[14:10:46] Writing BD structure to ISO file
- ImgBurn completed successfully
[14:29:20] JOB: JAWS finished.

Then you need to select "KEEP HD AUDIO for BD25" in the settings

[hifreak]

Then you need to select "KEEP HD AUDIO for BD25" in the settings OK Thanks never was a problem before maybe I unchecked it sometimes :o I will try that what you say :)

[jdobbs]

OK Thanks never was a problem before maybe I unchecked it sometimes :o I will try that what you say :)

Nothing has changed in that area in a long time... the audio should be simply extracted and remuxed. You could take a look at the .META files for the demuxing. If they don't say "down-to-dts" in the demux description for the audio track, they are being kept completely intact.

[ihmcjacky]

For the latest version of bd-rebuilder, I still facing the following 2 problems

1) - [21:44:16] CopyDirStructure() 00052 1200
- [21:44:18] CopyDirStructure() 00052 1200

when the file encoding and rebuilding is nearly finished, (I am sure the original file works fine)

2) [BD Rebuilder an error 2501][Selected source is not BD format] appears if the language and region is not set to English

Thanks for the attention
Any feedback on this?

[Adbear]

Any feedback on this?
I'm assuming it's being ignored until you post up a full logfile as asked when you posted the first time

[lauguru]

Hello
I've noticed a bug when converting mpeg2 files in some trailers sony discs, the mpeg2 file remains after the rebuild BD25, not become h264.

my confg:

[Options]
VERSION=0.41.0.1
MODE=0
MULTIPROCESS=4
ENCODE_QUALITY=3
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=24995
AUDIO_TO_KEEP=all
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=1
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=1
CONVERT_WIDE=1
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=24995
PRIORITY_CLASS=1
QUICK_EXTRAS=0
AUTO_BURN=0

[Adbear]

I would assume that's because those trailers don't get processed and therefore just get passed straight through with no re-encoding

[lauguru]

I would assume that's because those trailers don't get processed and therefore just get passed straight through with no re-encoding



but should re-encode mpeg2 video, no? well maybe not recognize the file structures.

[jdobbs]

but should re-encode mpeg2 video, no? well maybe not recognize the file structures. BD Rebuilder tries to save time by ignoring smaller files that will have little or no impact and passing them through intact. You get get around that by setting the minimum M2TS size (see HIDDENOPTS.TXT). But doing so really doesn't accomplish much... MPEG-2 is completely compatible with the blu-ray standard too.

[lauguru]

BD Rebuilder tries to save time by ignoring smaller files that will have little or no impact and passing them through intact. You get get around that by setting the minimum M2TS size (see HIDDENOPTS.TXT). But doing so really doesn't accomplish much... MPEG-2 is completely compatible with the blu-ray standard too.

MIN_M2TS_SIZE=1 n = minimum size required for BD-RB processing in MB, default is 100

By dialing 1, then encode all mpeg2 files, right?

[Adbear]

Why bother, there's no need to re-encode them

[lauguru]

but should re-encode mpeg2 video, no? well maybe not recognize the file structures.

mb to get some more for the BD25 .... it will be very little extra space, but it's something. q I do not care take longer to encode.:thanks:

[Adbear]

The space saved will be so negligible it's not worth it, it won't get you a better quality main movie from what you save, it will just give you a little bit more empty space on the disc

[lauguru]

The space saved will be so negligible it's not worth it, it won't get you a better quality main movie from what you save, it will just give you a little bit more empty space on the disc

I know, but hey, if I can save 50mb, some more space for the main movie or the extras. :)

[Adbear]

I know, but hey, if I can save 50mb, some more space for the main movie or the extras. :)Not really, 50MB will make no difference to the quality, maybe if you were saving a GB or 2 then that might make a difference, but 50MB or so won't

[lauguru]

say 50mb, but will be more likely to say something!, have not tried it yet but it is certainly one way to improve a little more, but the final quality, the human eye does not see

[Adbear]

say 50mb, but will be more likely to say something!, have not tried it yet but it is certainly one way to improve a little more, but the final quality, the human eye does not seeOK, waste your time, it will make either no or so little difference that it's not worth it. I doubt it will even effect the encoding bitrate unless you get 100's of MB's out of it

[lauguru]

OK, waste your time, it will make either no or so little difference that it's not worth it. I doubt it will even effect the encoding bitrate unless you get 100's of MB's out of it
I'll tell you the results. Thanks for answering:cool:

[Adbear]

I already know the results which is why I always remove trailers etc completely and even then it doesn't always make any difference when you get the final output

[nozuul]

Greetings,

Trying to make an iPad MP4 HD 1920 x 1080 alternate movie only output. Works fine if I use constant rate factor output, but the file size is bigger than I want (over 11 GB), so I used 2 pass target size at 4096 and get an MP4BOX error.

Here is the log.


----------------------
[08/19/12] BD Rebuilder v0.41.01 (beta)
[16:38:42] Source: THE_HUNGER_GAMES_PLAYLIST_00017
- Input BD size: 36.90 GB
- Approximate total content: [02:22:33.378]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: iPad MP4 HD, 1920x1080, 128Kbs AAC
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[16:38:42] PHASE ONE, Encoding
- [16:38:42] Processing: VID_00511 (1 of 12)
- [16:38:42] Extracting A/V streams [VID_00511]
- [16:45:50] Reencoding video [VID_00511]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 12,466 frames
- Bitrate: 3,738 Kbs
- [16:45:50] Reencoding: VID_00511, Pass 1 of 2
- [16:48:49] Reencoding: VID_00511, Pass 2 of 2
- [16:53:58] Video Encode complete
- [16:53:58] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AAC...
- [16:58:27] Processing: VID_00006 (2 of 12)
- [16:58:27] Extracting A/V streams [VID_00006]
- [16:58:33] Reencoding video [VID_00006]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 719 frames
- Bitrate: 4,097 Kbs
- [16:58:33] Reencoding: VID_00006, Pass 1 of 2
- [16:58:42] Reencoding: VID_00006, Pass 2 of 2
- [16:58:53] Video Encode complete
- [16:58:53] Processing: VID_00507 (3 of 12)
- [16:58:53] Extracting A/V streams [VID_00507]
- [17:01:06] Reencoding video [VID_00507]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 35,506 frames
- Bitrate: 4,095 Kbs
- [17:01:06] Reencoding: VID_00507, Pass 1 of 2
- [17:07:34] Reencoding: VID_00507, Pass 2 of 2
- [17:15:47] Video Encode complete
- [17:15:47] Processing: VID_00503 (4 of 12)
- [17:15:47] Extracting A/V streams [VID_00503]
- [17:15:55] Reencoding video [VID_00503]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,262 frames
- Bitrate: 4,084 Kbs
- [17:15:55] Reencoding: VID_00503, Pass 1 of 2
- [17:16:09] Reencoding: VID_00503, Pass 2 of 2
- [17:16:26] Video Encode complete
- [17:16:26] Processing: VID_00008 (5 of 12)
- [17:16:26] Extracting A/V streams [VID_00008]
- [17:17:49] Reencoding video [VID_00008]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 22,838 frames
- Bitrate: 4,064 Kbs
- [17:17:49] Reencoding: VID_00008, Pass 1 of 2
- [17:21:56] Reencoding: VID_00008, Pass 2 of 2
- [17:26:53] Video Encode complete
- [17:26:53] Processing: VID_00007 (6 of 12)
- [17:26:53] Extracting A/V streams [VID_00007]
- [17:27:01] Reencoding video [VID_00007]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,172 frames
- Bitrate: 4,110 Kbs
- [17:27:01] Reencoding: VID_00007, Pass 1 of 2
- [17:27:14] Reencoding: VID_00007, Pass 2 of 2
- [17:27:31] Video Encode complete
- [17:27:31] Processing: VID_00009 (7 of 12)
- [17:27:31] Extracting A/V streams [VID_00009]
- [17:27:39] Reencoding video [VID_00009]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,132 frames
- Bitrate: 4,108 Kbs
- [17:27:39] Reencoding: VID_00009, Pass 1 of 2
- [17:27:52] Reencoding: VID_00009, Pass 2 of 2
- [17:28:07] Video Encode complete
- [17:28:07] Processing: VID_00003 (8 of 12)
- [17:28:07] Extracting A/V streams [VID_00003]
- [17:29:46] Reencoding video [VID_00003]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 26,243 frames
- Bitrate: 4,077 Kbs
- [17:29:46] Reencoding: VID_00003, Pass 1 of 2
- [17:34:35] Reencoding: VID_00003, Pass 2 of 2
- [17:40:24] Video Encode complete
- [17:40:24] Processing: VID_00501 (9 of 12)
- [17:40:24] Extracting A/V streams [VID_00501]
- [17:40:29] Reencoding video [VID_00501]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 624 frames
- Bitrate: 4,093 Kbs
- [17:40:29] Reencoding: VID_00501, Pass 1 of 2
- [17:40:37] Reencoding: VID_00501, Pass 2 of 2
- [17:40:45] Video Encode complete
- [17:40:45] Processing: VID_00004 (10 of 12)
- [17:40:45] Extracting A/V streams [VID_00004]
- [17:43:03] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 40,442 frames
- Bitrate: 3,969 Kbs
- [17:43:04] Reencoding: VID_00004, Pass 1 of 2
- [17:50:04] Reencoding: VID_00004, Pass 2 of 2
- [17:58:48] Video Encode complete
- [17:58:48] Processing: VID_00505 (11 of 12)
- [17:58:48] Extracting A/V streams [VID_00505]
- [17:58:54] Reencoding video [VID_00505]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 706 frames
- Bitrate: 3,963 Kbs
- [17:58:54] Reencoding: VID_00505, Pass 1 of 2
- [17:59:02] Reencoding: VID_00505, Pass 2 of 2
- [17:59:12] Video Encode complete
- [17:59:12] Processing: VID_00502 (12 of 12)
- [17:59:12] Extracting A/V streams [VID_00502]
- [18:02:07] Reencoding video [VID_00502]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 61,966 frames
- Bitrate: 3,276 Kbs
- [18:02:07] Reencoding: VID_00502, Pass 1 of 2
- [18:11:57] Reencoding: VID_00502, Pass 2 of 2
- [18:24:37] Video Encode complete
[18:24:37]PHASE ONE complete
[18:24:37]PHASE TWO - Rebuild Started
- [18:24:37] Building ALTERNATE OUTPUT Structure
- ERROR in attempt to mux (MP4BOX)
[18:46:00] - Failed to REBUILD

Any ideas?

Thanks for the help!

[jdobbs]

MIN_M2TS_SIZE=1 n = minimum size required for BD-RB processing in MB, default is 100

By dialing 1, then encode all mpeg2 files, right?It depends whether the size would require reencoding. You didn't post your log, so I can't tell... but if you want to force encoding you can add FORCE_ENCODE=1 to your config file (see HIDDENOPTS.TXT).

[jdobbs]

Greetings,

Trying to make an iPad MP4 HD 1920 x 1080 alternate movie only output. Works fine if I use constant rate factor output, but the file size is bigger than I want (over 11 GB), so I used 2 pass target size at 4096 and get an MP4BOX error.

Here is the log.

Any ideas?

Thanks for the help!MP4BOX does the multiplexing into the .MP4 container. Not sure why you'd get an error just because you used 2-pass, that doesn't make sense. An X264 file is an X264 file either way. I'll have to pick up "The Hunger Games" and give it a test.

[jdobbs]

say 50mb, but will be more likely to say something!, have not tried it yet but it is certainly one way to improve a little more, but the final quality, the human eye does not seeAdbear is right. There's "trying to get the best" and then there's "going overboard" -- in this case you're (respectfully) going overboard.

[nozuul]

MP4BOX does the multiplexing into the .MP4 container. Not sure why you'd get an error just because you used 2-pass, that doesn't make sense. An X264 file is an X264 file either way. I'll have to pick up "The Hunger Games" and give it a test.

Thanks for looking into this, first time it has happened to me.

:thanks:

[mcdcad]

In backing up this movie ,movie only backup, I'm using any dvd hd latest version. Bd rebuilder latest version all the tools are up to date. Two scenes while playing the copied movie back were out of sequence. This happened on two other movies and I can never seem to find a fix for it. The only way around it seems to be a full backup using a 50 gig disk. I have backed up many movies with your software and with no problem. great great software for bd movies. Also play lists at times seems to be a problem. I used 665 for this movie. I have read allot of issues as far as that goes. Any suggestions.

[Adbear]

When you say the 'latest' AnyDVD, which build do you mean?

[jdobbs]

In backing up this movie ,movie only backup, I'm using any dvd hd latest version. Bd rebuilder latest version all the tools are up to date. Two scenes while playing the copied movie back were out of sequence. This happened on two other movies and I can never seem to find a fix for it. The only way around it seems to be a full backup using a 50 gig disk. I have backed up many movies with your software and with no problem. great great software for bd movies. Also play lists at times seems to be a problem. I used 665 for this movie. I have read allot of issues as far as that goes. Any suggestions. You likely have to change the selected playlist. There are a few discs out there that create a few or even a large selection of available playlists in an attempt to obfuscate the correct one. Some of the available playlists do nothing but mix up or repeat scenes. Since selecting the correct playlist is essentially just an educated guess (there are no flags that say "I am the movie") -- it's possible that BD-RB might pick the wrong one. Usually a google search will tell you which playlist is correct.

[setarip_old]

@mcdcad

The following information appeared in a post at another forum. It seems to be pertinent to your post here:

I clicked through it for those scenes and you're correct. You can see the window of the train if you pay attention.

And for the part where she's training and then out of nowhere she appears to be in the forest. Well, she isn't actually in the forest, but in the spot where two others where previously making a fire. She's now in that same spot trying to make a fire herself. It's a quick scene so it looks disjointed.

So yeah, 76 is a good playlist.

[jellyhead1]

It would seem that all these playlists are the same due to the obfuscation protection

76
108
447
462
565
665
832
843
876
971

I used MultiAVCHD to blank all titles except 00971 and 00003 (menu) resulting in a blanked main movie. This was OK because I used TSMuxer to loaded playlist 00971 and created a single m2ts for the main movie. I then renamed the 00000.m2ts and 00000.clpi to 00004 and replaced the files created by MultiAVCHD. I edited the 00000.mpls created by TSMuxer changing the m2ts to 00004 then replaced all of the main movie playlists with the edited one including 00321.mpls which includes the 'Your disc can't play' clip. The menu and all chapter links were working so I then used BDRebuilder to resize the movie for BD25.

If you just want to do movie only, then use TSMuxer on playlist 971 and output as BluRay then use BDRebuilder to resize the created files.

I use MultiAVCHD since the blank title option in BDRebuilder has yet to be finished. With each new release I hope that it will be be finished but not so far.

[jdobbs]

It would seem that all these playlists are the same due to the obfuscation protection

76
108
447
462
565
665
832
843
876
971

I used MultiAVCHD to blank all titles except 00971 and 00003 (menu) resulting in a blanked main movie. This was OK because I used TSMuxer to loaded playlist 00971 and created a single m2ts for the main movie. I then renamed the 00000.m2ts and 00000.clpi to 00004 and replaced the files created by MultiAVCHD. I edited the 00000.mpls created by TSMuxer changing the m2ts to 00004 then replaced all of the main movie playlists with the edited one including 00321.mpls which includes the 'Your disc can't play' clip. The menu and all chapter links were working so I then used BDRebuilder to resize the movie for BD25.

If you just want to do movie only, then use TSMuxer on playlist 971 and output as BluRay then use BDRebuilder to resize the created files.

I use MultiAVCHD since the blank title option in BDRebuilder has yet to be finished. With each new release I hope that it will be be finished but not so far. Why not just select the correct playlist from within BD-RB directly instead of making it complicated?

[Ch3vr0n]

Because unless I'm mistaking you can only do a movie only with an alternate playlist, somewhere near the bottom open said something about keeping menu etc too. With an alternate playlist, you lose the menu.

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[jdobbs]

If you are doing a full backup, then you don't have to worry about any of it... because the structure will transfer over and work the same. A movie-only uses only one MPLS anyway, so all you have to do is select it.

As for "blanking" or removing the other playlists -- you couldn't "blank" or "remove" any of them anyway -- because they contain pointers to the exact same video that is in the true playback, they are just referenced out of order. I guess if they are unreferenced you could simply dump the MPLS or ignore it -- but in the end you would have the same thing as a full backup anyway.

Removing this kind of stuff accomplishes nothing -- you save no space (because they are referenced elsewhere), you take the chance of screwing up the internal functioning and menuing system, and in the end you get about the same thing as a full backup would have done with a single click. It's like going around the world to get to the other side of the street -- sure it works, but why would you choose that option?

[jellyhead1]

Why not just select the correct playlist from within BD-RB directly instead of making it complicated?

True, you can do that with BDRebuilder but you will wait 1.5+ hrs to find out if you have the movie you want. I use TSMuxer when creating a movie only BR so I can check to make sure the movie plays as it should without wasting hrs with BDRebuilder. I suppose you can just use the preview feature in BDRebuilder but I just like to do it this way, it only takes a matter of minutes with TSMuxer. When done I use BDRebuilder to resize.

BDRebuilder doesn't currently offer any way to create a movie with extras stripped but retaining the menu. This is why all the extra steps are necessary before using BDRebuilder to resize. I use MultiAVCHD to blank all playlists I don't want such as previews and warnings. When there are multiple playlists for the same clips it doesn't work correctly though.

I'm hoping the blanking feature in BDRebuilder will be functional soon.

[Adbear]

BDRebuilder doesn't currently offer any way to create a movie with extras stripped but retaining the menu.It does, it just doesn't let you choose a different playlist when using that option

[AmigaFuture]

It's like going around the world to get to the other side of the street -- sure it works, but why would you choose that option?

Perhaps for the adventure which leads to experience? :D Especially if you ~go~ around the world just to get to that other side of the street..the people you meet, the sites you see, the adventures you have while getting there. Much like some blind friends helping Me to "see"/hear video/audio with more detail than just accepting "What Is". If I just accepted "It looks/sounds good enough.." then where's the beyond mainstream adventure in That?

I thought it pretty cool what Jellyhead1 did.

High Speed option for BD-25 is swEEEEt, but an option for rebuild without compression would be really nice. Something like DVD Rebuilder has. A thought, for what it's worth. :D

[mayhem2408]

I have bene using BD-rebuilder for a long time now. In the past I have only been creating BD25 discs. Recently I started creating 1080p MKVs. I am mainly using the MKV 1920x1080 640kbs DD5.1, but sometimes use the 1280x720 448kbs DD5.1.

The MKV file is created and appears to play, but the subtitles are on automatically by default. So I run mkvmerge GUI to change the subtitles to default as no. This way I still have the subs if I want them, but are not on by default. However mkvmerge starts popping errors in the log that the structure is corrupt, Resyncing. etc. Eventually it fails.

However, If I take the 264, AC3, SUP and chapter files from the WORKING folder and manually merge them, the resulting MKV is fine and none of the individual files are corrupt.

Is there a parameter I might have wrong?

MKVMERGE LOG based on MKV created by BD-Rebuilder:
mkvmerge v5.7.0 ('The Whirlwind') built on Jul 8 2012 20:08:51
'H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV': Using the demultiplexer for the format 'Matroska'.
'H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV' track 0: Using the output module for the format 'AVC/h.264'.
'H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV' track 1: Using the output module for the format 'AC3'.
'H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV' track 3: Using the output module for the format 'PGS'.
The file 'H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01 (1).mkv' has been opened for writing.
H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV: Error in the Matroska file structure at position 566670502. Resyncing to the next level 1 element.
Resyncing successful at position 567732205.
H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV: Error in the Matroska file structure at position 583740369. Resyncing to the next level 1 element.
Resyncing successful at position 584087942.
H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV: Error in the Matroska file structure at position 775978006. Resyncing to the next level 1 element.
Resyncing successful at position 776833055.
H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV: Error in the Matroska file structure at position 793108216. Resyncing to the next level 1 element.
Resyncing successful at position 793250521.
H:\BATTLESHIP_720p_MKV\BATTLESHIP_G51_01.MKV: Error in the Matroska file structure at position 1448150014. Resyncing to the next level 1 element.


MKVMERGE LOG based on 264,AC3,SUP,CHP files created by BD-Rebuilder:

mkvmerge v5.7.0 ('The Whirlwind') built on Jul 8 2012 20:08:51
'H:\BATTLESHIP_720p_MKV\WORKFILES\VID_00023.AVS.264': Using the demultiplexer for the format 'AVC/h.264'.
'H:\BATTLESHIP_720p_MKV\WORKFILES\AUD_00023_4353.AC3': Using the demultiplexer for the format 'AC3'.
'H:\BATTLESHIP_720p_MKV\WORKFILES\00023.track_4609.sup': Using the demultiplexer for the format 'PGSSUP'.
'H:\BATTLESHIP_720p_MKV\WORKFILES\VID_00023.AVS.264' track 0: Using the output module for the format 'AVC/h.264'.
'H:\BATTLESHIP_720p_MKV\WORKFILES\AUD_00023_4353.AC3' track 0: Using the output module for the format 'AC3'.
'H:\BATTLESHIP_720p_MKV\WORKFILES\00023.track_4609.sup' track 0: Using the output module for the format 'PGS'.
The file 'H:\BATTLESHIP_720p_MKV\Battleship (2012) 720p.h264.ac3.sup.chap.mkv' has been opened for writing.
The cue entries (the index) are being written...
Muxing took 2 minutes 9 seconds.

[nozuul]

If you are doing a full backup, then you don't have to worry about any of it... because the structure will transfer over and work the same. A movie-only uses only one MPLS anyway, so all you have to do is select it.

As for "blanking" or removing the other playlists -- you couldn't "blank" or "remove" any of them anyway -- because they contain pointers to the exact same video that is in the true playback, they are just referenced out of order. I guess if they are unreferenced you could simply dump the MPLS or ignore it -- but in the end you would have the same thing as a full backup anyway.

Removing this kind of stuff accomplishes nothing -- you save no space (because they are referenced elsewhere), you take the chance of screwing up the internal functioning and menuing system, and in the end you get about the same thing as a full backup would have done with a single click. It's like going around the world to get to the other side of the street -- sure it works, but why would you choose that option?

I actual tried the full backup first with this movie. It completed without any errors, but the disk will not play in any blue ray player I have, or on the computer. I read on other boards that other people were having this issue with Hunger Games. I just made a movie only backup and it worked fine. Entire disk gave me a headache...:(

[mayhem2408]

After playing around a bit, I have captured the command line sent to mkvmerge and reproduced the problem at the command line, however if I remove the --default-duration 0:23.976fps parameter from the command line, the resulting file does not appear to be corrupt. I also tried changing the default duration to 0:24000/1001p and that appears to work OK as well. Has anyone else experienced this problem.

[Adbear]

I actual tried the full backup first with this movie. It completed without any errors, but the disk will not play in any blue ray player I have, or on the computer. I read on other boards that other people were having this issue with Hunger Games. I just made a movie only backup and it worked fine. Entire disk gave me a headache...:(
Did you check that the rip plays back on your PC before running it through BD rebuilder. Some of the people over on the Slysoft forum had to re-rip the movie with everything set to 'default' and just the region code removed before they got a working copy.

[nozuul]

Did you check that the rip plays back on your PC before running it through BD rebuilder. Some of the people over on the Slysoft forum had to re-rip the movie with everything set to 'default' and just the region code removed before they got a working copy.

I have not yet tried to re-rip it, partly because I was able to get the main movie, and partly because I didn't recall ever messing with the default settings to begin with. Just figured I'd call the main movie good enough and not risk another disk. I'm cheap that way. :rolleyes:

[Adbear]

But did you check the original rip by playing it on your PC in PDVD or TMT?

[jdobbs]

Perhaps for the adventure which leads to experience? :D Especially if you ~go~ around the world just to get to that other side of the street..the people you meet, the sites you see, the adventures you have while getting there. Much like some blind friends helping Me to "see"/hear video/audio with more detail than just accepting "What Is". If I just accepted "It looks/sounds good enough.." then where's the beyond mainstream adventure in That?

I thought it pretty cool what Jellyhead1 did.

High Speed option for BD-25 is swEEEEt, but an option for rebuild without compression would be really nice. Something like DVD Rebuilder has. A thought, for what it's worth. :DTo force a disc to rebuild without compression you would add FORCE_NOENCODE=1 to your config file.

[jdobbs]

I actual tried the full backup first with this movie. It completed without any errors, but the disk will not play in any blue ray player I have, or on the computer. I read on other boards that other people were having this issue with Hunger Games. I just made a movie only backup and it worked fine. Entire disk gave me a headache...:( I would check the original and make sure it is good. In all the discs I've done in testing (a huge number) I have yet to have found one that will not successfully backup in full backup mode. The only exception might be related to playback of secondary audio with DTS Express -- and even that is dependent on certain players.

[jdobbs]

True, you can do that with BDRebuilder but you will wait 1.5+ hrs to find out if you have the movie you want. I use TSMuxer when creating a movie only BR so I can check to make sure the movie plays as it should without wasting hrs with BDRebuilder. I suppose you can just use the preview feature in BDRebuilder but I just like to do it this way, it only takes a matter of minutes with TSMuxer. When done I use BDRebuilder to resize.

BDRebuilder doesn't currently offer any way to create a movie with extras stripped but retaining the menu. This is why all the extra steps are necessary before using BDRebuilder to resize. I use MultiAVCHD to blank all playlists I don't want such as previews and warnings. When there are multiple playlists for the same clips it doesn't work correctly though.

I'm hoping the blanking feature in BDRebuilder will be functional soon.1. You don't have to wait... that's why there is a preview mode. The fact that you don't like to preview isn't the same thing as "you have to wait 1.5 hours". You have to preview some way even if you do it your way...

2. BD-RB does offer a mode with extras stripped out. Although it is experimental, you may want to search this thread.

3. Blanking works now (see #2) -- but, like any other way of blanking you need to review it and make sure you are blanking what you want.

So I guess the point is... until you learn all the features of the software you shouldn't make assumptions as to what it can and can't do -- or telling others the same.

[colinhunt]

Found a bug relating to aspect ratios. Did a full backup of Eureka's Punishment Park (UK release) which includes a 28:29min introduction by the director. The source video specs, according to MediaInfo, are AVC, 35Mbps CBR, 16:9 AR, 24fps progressive -- and a resolution of 1440x1080.

BD-RB v0.41.01's Stream window says the file is MPEG-4 (AVC), 1080p, 24fps. Encoding log says of the file:

- [21:57:36] Processing: VID_00006 (3 of 4)
- [21:57:36] Extracting A/V streams [VID_00006]
- [21:59:41] Reencoding video [VID_00006]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 24,000fps, 41*032 frames
- Bitrate: 25*172 Kbs
- [21:59:41] Reencoding: VID_00006, Pass 1 of 2
- [22:09:29] Reencoding: VID_00006, Pass 2 of 2
- [22:53:05] Video Encode complete

What comes out after processing is an AVC file with an AR of 4:3 and a resolution of 1440x1080. The image is horizontally squashed.

[jdobbs]

Found a bug relating to aspect ratios. Did a full backup of Eureka's Punishment Park (UK release) which includes a 28:29min introduction by the director. The source video specs, according to MediaInfo, are AVC, 35Mbps CBR, 16:9 AR, 24fps progressive -- and a resolution of 1440x1080.

BD-RB v0.41.01's Stream window says the file is MPEG-4 (AVC), 1080p, 24fps. Encoding log says of the file:

- [21:57:36] Processing: VID_00006 (3 of 4)
- [21:57:36] Extracting A/V streams [VID_00006]
- [21:59:41] Reencoding video [VID_00006]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 24,000fps, 41*032 frames
- Bitrate: 25*172 Kbs
- [21:59:41] Reencoding: VID_00006, Pass 1 of 2
- [22:09:29] Reencoding: VID_00006, Pass 2 of 2
- [22:53:05] Video Encode complete

What comes out after processing is an AVC file with an AR of 4:3 and a resolution of 1440x1080. The image is horizontally squashed. Is this from an original BD disc?

[jellyhead1]

2. BD-RB does offer a mode with extras stripped out. Although it is experimental, you may want to search this thread.

I guess I don't understand how it works, i only see a full disk and movie only. How are the extras stripped.


3. Blanking works now (see #2) -- but, like any other way of blanking you need to review it and make sure you are blanking what you want.

I guess I don't understand how the blanking function works. For me this option is always greyed out. I do have all the required apps installed including #2 - Avisynth v2.58




NM, I just found post #12911

[colinhunt]

Is this from an original BD disc?
Only pre-processing was done by AnyDVD for ripping to HDD. Original really has a resolution of 1440x1080, something I haven't seen on a Blu-ray before.

[RobertM]

I guess I don't understand how it works, i only see a full disk and movie only. How are the extras stripped.

Here's a link to where the discussion began about how to use these experimental features: http://forum.doom9.org/showthread.php?p=1526277#post1526277

[jdobbs]

Only pre-processing was done by AnyDVD for ripping to HDD. Original really has a resolution of 1440x1080, something I haven't seen on a Blu-ray before. It's legal according to the spec, but I've never seen one either. The reason it is stretched is because 1440x1080 should always be displayed with black bars on the sides (making it 1920x1080). I'm going to look around and see if I can find an original in that format so I can do some testing.

[ihmcjacky]

When the region is set to Chinese (taiwan), bd-rebuilder cannot read the bd folder and encounters the following message
http://i102.photobucket.com/albums/m112/ihmcjacky/111-9.jpg

But when I try to change the region setting to English, it does not appear, please note and fix this bug, thanks!

[Adbear]

It's legal according to the spec, but I've never seen one either. The reason it is stretched is because 1440x1080 should always be displayed with black bars on the sides (making it 1920x1080). I'm going to look around and see if I can find an original in that format so I can do some testing.
Are you sure about that, 1440 uses non square pixels (1.33) so it should always show as full frame without black bars down the side. All my own 1440x1080 footage plays back as full frame when I put it onto a Blu-ray

[A.Fenderson]

Are you sure about that, 1440 uses non square pixels (1.33) so it should always show as full frame without black bars down the side. All my own 1440x1080 footage plays back as full frame when I put it onto a Blu-ray

Agreed. I have a number of adult releases that use 1440x1080, some interlaced some progressive, and they're all 16:9 DAR, which is the only BD-spec allowed DAR for this resolution (http://forum.doom9.org/showthread.php?p=1399419#post1399419). I can understand why this would cause confusion, because the BD spec was built for a world of square pixels and HD, and yet there it is: anamorphic encoding at HD resolution.

edit: this might have been a concession to formats such as HDV which actually capture at 1440x1080, 16:9. (http://en.wikipedia.org/wiki/HDV#Specifications)

[jdobbs]

When the region is set to Chinese (taiwan), bd-rebuilder cannot read the bd folder and encounters the following message
http://i102.photobucket.com/albums/m112/ihmcjacky/111-9.jpg

But when I try to change the region setting to English, it does not appear, please note and fix this bug, thanks! That's probably because of the way I am using text strings in some code areas. In order to get it to work with an Asian language you'll probably have to set the "Language for Non-Unicode programs" in the control panel to a western language. I believe its under "Regional and Language Options".

[jdobbs]

Are you sure about that, 1440 uses non square pixels (1.33) so it should always show as full frame without black bars down the side. All my own 1440x1080 footage plays back as full frame when I put it onto a Blu-ray I'm confused. How can you display full screen with no black bars on a 16:9 screen without distortion? When you say "full frame" are you talking about "full" as in full-screen (4:3) or "full" as in "fills the screen on my 16:9 monitor"?

Have you backed any of these up with BD-RB? Did they reencode correctly?

[NightHawkGuy]

Recently I had a case of Windows 7 x64 displaying an exception popup about wavi.exe when it was finished for a rare Blu-Ray with LPCM for audio on the main title and BD Rebuilder would convert the LPCM audio track to AC3. The BD Rebuilder process would stop and wait for user input when the error message popped up.

I did some searching and found that someone had done a small code change about a year ago to wavi from the wavi v1.06 source to create wavi v1.06m specifically to resolve the bug in wavi that causes that exception to happen when wavi is cleaning up to close down.

I downloaded the newer wavi.exe version (v1.06m) and used it (in place of the older v1.06) with bd rebuilder and it worked fine this time, no more problem with using LPCM audio track and converting to AC3, no more error message.

Here is the link to the doom9 thread about the wavi fix, which includes the download link to the wavi106m.zip file:
http://forum.doom9.org/showthread.php?t=161639

Another source of a wavi bug fix for v1.06 regarding: bug in wav header - ID: 2957741
http://sourceforge.net/tracker/?func=detail&aid=2957741&group_id=196137&atid=956250

Might be useful in future bd rebuilder version to include that newer version of wavi to resolve the rare bug with some titles with LPCM audio track, if conversion to AC3 is desired.

[SquallMX]

I'm confused. How can you display full screen with no black bars on a 16:9 screen without distortion? When you say "full frame" are you talking about "full" as in full-screen (4:3) or "full" as in "fills the screen on my 16:9 monitor"?

Have you backed any of these up with BD-RB? Did they reencode correctly?

1440x1080 mode is anamorphic (16:9 material encoded at 4:3 resolution), I use that format for my BD9 backups (great middle point between 720p and full 1080p), BD-Rebuilder probably is using SAR 1:1 when re-encoding causing the wrong playback ratio, for proper playback just change the value to "--sar 4:3". :helpful:

PD: It would be great to have an option for use that resolution on BD-Rebuilder :).

[jdobbs]

After playing around a bit, I have captured the command line sent to mkvmerge and reproduced the problem at the command line, however if I remove the --default-duration 0:23.976fps parameter from the command line, the resulting file does not appear to be corrupt. I also tried changing the default duration to 0:24000/1001p and that appears to work OK as well. Has anyone else experienced this problem. I've modified the MKV output so that it no longer has any subtitles defaulted to "on". You'll see it in the next release.

I've never had an issue with setting the default-duration with fps... but I'll do some testing just to make sure everything is kosher.

[jdobbs]

1440x1080 mode is anamorphic (16:9 material encoded at 4:3 resolution), I use that format for my BD9 backups (great middle point between 720p and full 1080p), BD-Rebuilder probably is using SAR 1:1 when re-encoding causing the wrong playback ratio, for proper playback just change the value to "--sar 4:3". :helpful:

PD: It would be great to have an option for use that resolution on BD-Rebuilder :). The PITA part is recognizing the 1440x1080 source. I've been getting the video information from the CLPI and MPLS files, which tells you it is 1080p... but doesn't specify the horizontal resolution. At this point all 1080p sources are just assumed to be 1920x1080... I guess I need to add some code to do a look at the M2TS itself for the horizontal resolution. Interesting that with all the discs I've done I've never run into one with that source resolution.

[jdobbs]

Recently I had a case of Windows 7 x64 displaying an exception popup about wavi.exe when it was finished for a rare Blu-Ray with LPCM for audio on the main title and BD Rebuilder would convert the LPCM audio track to AC3. The BD Rebuilder process would stop and wait for user input when the error message popped up.

I did some searching and found that someone had done a small code change about a year ago to wavi from the wavi v1.06 source to create wavi v1.06m specifically to resolve the bug in wavi that causes that exception to happen when wavi is cleaning up to close down.

I downloaded the newer wavi.exe version (v1.06m) and used it (in place of the older v1.06) with bd rebuilder and it worked fine this time, no more problem with using LPCM audio track and converting to AC3, no more error message.

Here is the link to the doom9 thread about the wavi fix, which includes the download link to the wavi106m.zip file:
http://forum.doom9.org/showthread.php?t=161639

Another source of a wavi bug fix for v1.06 regarding: bug in wav header - ID: 2957741
http://sourceforge.net/tracker/?func=detail&aid=2957741&group_id=196137&atid=956250

Might be useful in future bd rebuilder version to include that newer version of wavi to resolve the rare bug with some titles with LPCM audio track, if conversion to AC3 is desired. Thanks. I'll download it and do some testing -- and if all is well, I'll include it in the next release.

[Adbear]

The PITA part is recognizing the 1440x1080 source. I've been getting the video information from the CLPI and MPLS files, which tells you it is 1080p... but doesn't specify the horizontal resolution. At this point all 1080p sources are just assumed to be 1920x1080... I guess I need to add some code to do a look at the M2TS itself for the horizontal resolution. Interesting that with all the discs I've done I've never run into one with that source resolution.
It's not something you normally find on commercial discs which is why you've probably never come cross it, but in the editing world HDV (anamorphic 1440x1080) cameras have been around for years (although they are now disappearing) and has been part of the Blu-ray spec since the beginning. Most people just convert it to 1920x1080 when outputting to Blu-ray.

[lauguru]

hello
bdrebuilder not saved correctly in custom target size mb, in the setup menu, when you write to save, not the file is saved in bdrebuilder.ini.
Must manually edit bdrebuilder.ini, so it is saved.
http://subir.cc/images/bugxux.jpg

[Sharc]

1440x1080 mode is anamorphic (16:9 material encoded at 4:3 resolution), I use that format for my BD9 backups (great middle point between 720p and full 1080p), BD-Rebuilder probably is using SAR 1:1 when re-encoding causing the wrong playback ratio, for proper playback just change the value to "--sar 4:3". :helpful:

PD: It would be great to have an option for use that resolution on BD-Rebuilder :).
Agree. 1440x1080 @ --sar 4:3 for DAR 16:9 is fully blu-ray standard compliant, same as the more usual 1920x1080. I have also made a couple of such anamorphic backups using this format on BD5 and have no playback issues on the SONY S360. I have however not seen this format on any commercial Blu-Ray disk so far.
+1 to get it into BD-RB as an option :)

[Adbear]

hello
bdrebuilder not saved correctly in custom target size mb, in the setup menu, when you write to save, not the file is saved in bdrebuilder.ini.
Must manually edit bdrebuilder.ini, so it is saved.
Works fine here on 4 different systems, must be something on your system blocking BD rebuilder from altering the .ini file

[lauguru]

hello
other problem or bug

bdrebuilder not capable of extracting audio from Ucontrol pip

http://subir.cc/images/bugucontro.jpg

[lauguru]

Works fine here on 4 different systems, must be something on your system blocking BD rebuilder from altering the .ini file
hello

have the latest version of bdrebuilder? the v041.01?
my previous versions in me works perfect, but in this version, I have to not let me edit and save bdrebuilder.in.

I know it can not happen!

[jdobbs]

hello
other problem or bug

bdrebuilder not capable of extracting audio from Ucontrol pip

http://subir.cc/images/bugucontro.jpgSearch for DTSX_ENABLE=1 in this thread.

[jdobbs]

hello

have the latest version of bdrebuilder? the v041.01?
my previous versions in me works perfect, but in this version, I have to not let me edit and save bdrebuilder.in.

I know it can not happen! Where did you install it? Did you follow the directions and not install it in the "Program Files" path?

[lauguru]

Where did you install it? Did you follow the directions and not install it in the "Program Files" path?

in a folder on the desktop, I checked the file inpest.exe is all ok. overwrote all the files in the folder that had, by the BD-RBV04101.rar.

[lauguru]

Search for DTSX_ENABLE=1 in this thread.

gracias jdobbs

i add DTSX_ENABLE=1 in bdrebuilder .ini

Now if that recognizes it;)

[jdobbs]

in a folder on the desktop, I checked the file inpest.exe is all ok. overwrote all the files in the folder that had, by the BD-RBV04101.rar. Unfortunately this is obviously a problem that is caused by your system configuration, and there is nothing anyone else can do to fix it. Please only post bug reports related to BD-RB in this forum.

Don't know where you downloaded -- but I don't pack BD-RB in .RAR files.

[lauguru]

Unfortunately this is obviously a problem that is caused by your system configuration, and there is nothing anyone else can do to fix it. Please only post bug reports related to BD-RB in this forum.

Don't know where you downloaded -- but I don't pack BD-RB in .RAR files.

tomorrow will try to remove everything completely and reinstall everything again. Have if it fixes;)

[jdobbs]

tomorrow will try to remove everything completely and reinstall everything again. Have if it fixes;) It's probably a rights issue... it's a simple open, write, close procedure.

By the way, I have no idea what "inpest.com" is... but it isn't a part of BD-RB...

[RobertM]

By the way, I have no idea what "inpest.com" is... but it isn't a part of BD-RB...

From the context, he probably meant to type "inspect.exe".

[lauguru]

It's probably a rights issue... it's a simple open, write, close procedure.

By the way, I have no idea what "inpest.com" is... but it isn't a part of BD-RB...

inspect.exe:devil:

[jdobbs]

inspect.exe:devil: Ahh.. ok. But that wouldn't pick up a rights issue.

[lauguru]

nothing ... I did not succeed, not to the test went well, the pip Ucontrol appears without the express dts audio. is blank audio
You would not create a function to convert DTS Express, to ac3? Perhaps part of the solution comes there.

[jdobbs]

nothing ... I did not succeed, not to the test went well, the pip Ucontrol appears without the express dts audio. is blank audio
You would not create a function to convert DTS Express, to ac3? Perhaps part of the solution comes there. :search:Please search the forum. It's a long story and has been discussed many times. The short answer is "No".

[lauguru]

:search:Please search the forum. It's a long story and has been discussed many times. The short answer is "No".

hello
the thing is very curious, would erase all the work again, when I got to thinking the player play with ArcSoft TotalMedia Theatre. And the result is that it works, but you have to put in the program, the audio output as dts mixture. We already heard correctly Ucontrol pip. An accomplishment.

[CV91913]

I have used BD Rebuilder for 100's of Movie Only backups and it has worked like a charm. I just purchased the 2 disc Cleopatra set and decided to try (for the first time) to do my normal movie only and then a BD5 for the extras using your new edit mode. Disc 1 worked as expected and produced a 4.1 gb structure. Disc 2 did not work so well. The first disc had failrly small extras and I did 3 of them that totalled 7.08 GB. The second disc had 1 2hr extra and a couple of smaller ones which I kept 1 of for a total of 7.16 GB. The build completed without error but the resulting structure was 4.92 GB. Much too big. I tried it twice. Both of the resulting BD5 Stream directories have a boatload of very small files. Could that be the problem? I am including the logs.

[08/26/12] BD Rebuilder v0.41.01 (beta)
[08:09:45] Source: CLEOPATRA_DISC_2
- Input BD size: 7.16 GB
- Approximate total content: [04:47:54.715]
- Target BD size: 4.36 GB
- Windows Version: 6.1 [7601]
- Auto Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[08:09:57] PHASE ONE, Encoding
- [08:09:57] Blanking: VID_00001 (1 of 12)
- [08:09:57] Processing: VID_00002 (2 of 12)
- [08:09:57] Extracting A/V streams [VID_00002]
- [08:10:07] Reencoding video [VID_00002]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,344 frames
- Bitrate: 15,000 Kbs
- [08:10:07] Reencoding: VID_00002, Pass 1 of 2
- [08:11:31] Reencoding: VID_00002, Pass 2 of 2
- [08:15:38] Video Encode complete
- [08:15:38] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:15:38] Multiplexing M2TS
- [08:15:53] Processing: VID_00003 (3 of 12)
- [08:15:53] Extracting A/V streams [VID_00003]
- [08:16:03] Reencoding video [VID_00003]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,344 frames
- Bitrate: 15,000 Kbs
- [08:16:03] Reencoding: VID_00003, Pass 1 of 2
- [08:17:28] Reencoding: VID_00003, Pass 2 of 2
- [08:21:34] Video Encode complete
- [08:21:34] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:21:34] Multiplexing M2TS
- [08:21:48] Processing: VID_00004 (4 of 12)
- [08:21:48] Extracting A/V streams [VID_00004]
- [08:25:23] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 720x480
- Rate/Length: 29.970fps, 214,200 frames
- Bitrate: 3,456 Kbs
- [08:25:23] Reencoding: VID_00004, Pass 1 of 2
- [09:09:36] Reencoding: VID_00004, Pass 2 of 2
- [11:05:49] Video Encode complete
- [11:05:50] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [11:05:50] Multiplexing M2TS
- [11:08:33] Processing: VID_00005 (5 of 12)
- [11:08:33] Extracting A/V streams [VID_00005]
- [11:09:06] Reencoding video [VID_00005]
- Source Video: MPEG-4 (AVC), 720x480
- Rate/Length: 29.970fps, 27,750 frames
- Bitrate: 3,497 Kbs
- [11:09:07] Reencoding: VID_00005, Pass 1 of 2
- [11:15:36] Reencoding: VID_00005, Pass 2 of 2
- [11:33:43] Video Encode complete
- [11:33:43] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [11:33:43] Multiplexing M2TS
- [11:33:55] Blanking: VID_00006 (6 of 12)
- [11:33:55] Blanking: VID_00007 (7 of 12)
- [11:33:55] Blanking: VID_00009 (8 of 12)
- [11:33:55] Blanking: VID_00010 (9 of 12)
- [11:33:55] Blanking: VID_00011 (10 of 12)
- [11:33:55] Blanking: VID_00012 (11 of 12)
- [11:33:55] Processing: VID_00720 (12 of 12)
- [11:33:55] Extracting A/V streams [VID_00720]
- [11:34:00] Reencoding video [VID_00720]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 430 frames
- Bitrate: 12,652 Kbs
- [11:34:00] Reencoding: VID_00720, Pass 1 of 2
- [11:34:25] Reencoding: VID_00720, Pass 2 of 2
- [11:36:22] Video Encode complete
- [11:36:22] Processing audio tracks
- [11:36:22] Multiplexing M2TS
[11:36:29]PHASE ONE complete
[11:36:29]PHASE TWO - Rebuild Started
- [11:36:29] Rebuilding BD file Structure
[11:37:37] - Encode and Rebuild complete
- WORKFILES folder removed.
[11:37:37] JOB: CLEOPATRA_DISC_2 finished.


[Status]
LABEL=CLEOPATRA_DISC_2
VERSION=v0.41.01 (beta)
SOURCE_SIZE=7691801291
SOURCE_VIDEO_SIZE=7343087616
TARGET_SIZE=4686086144
REDUCTION=.590674208972968
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=eng;
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=-1
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=12
REBUILD_COMPLETE=1
[00002]
AUDIO=1
PGS=
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=132153762
RATE=15000
SPLITS=1
NSIZE=106487808
FLINK=-1
MLINK=-1
[00003]
AUDIO=1
PGS=
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=132886840
RATE=15000
SPLITS=1
NSIZE=107544576
FLINK=-1
MLINK=-1
[00004]
AUDIO=1
PGS=10000000000
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=3574244829
RATE=3456
SPLITS=1
NSTART=27000000
NEND=348621210
NSIZE=4147771392
FLINK=0
MLINK=0
[00005]
AUDIO=1
PGS=10000000000
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=467577175
RATE=3497
SPLITS=1
NSTART=27000000
NEND=68665122
NSIZE=542681088
FLINK=0
MLINK=0
[00720]
AUDIO=
PGS=
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=30509863
RATE=12652
SPLITS=1
NSIZE=28551168
FLINK=-1
MLINK=-1

[aneurysm]

hi, not sure if this is a bug or just something I do wrong.
I know the blanking is still experimental, but I find it working very well .. except when I do several discs at once in batch.

I select a disc, blank what I want, and choose "add to batch" .. and then open the next one and do the same, and so on.

The end result is that the stuff I selected for blanking isn't blanked. I find it weird, since when I look at a disc in the batch serie under it's settings, I do see for instance "blank=1101010101" , which I presume is blank first & second, keep third ...

Anyone else have the same issue ?

[jdobbs]

hi, not sure if this is a bug or just something I do wrong.
I know the blanking is still experimental, but I find it working very well .. except when I do several discs at once in batch.

I select a disc, blank what I want, and choose "add to batch" .. and then open the next one and do the same, and so on.

The end result is that the stuff I selected for blanking isn't blanked. I find it weird, since when I look at a disc in the batch serie under it's settings, I do see for instance "blank=1101010101" , which I presume is blank first & second, keep third ...

Anyone else have the same issue ? I'll check it out.

[Movies]

Hi

This is the first time I have problems with a movie. Let me know if you need more info.

[08/14/12] BD Rebuilder v0.41.01 (beta)
[13:48:47] Source: THE_HUNGER_GAMES
- Input BD size: 44,66 GB
- Approximate total content: [02:41:40.475]
- Target BD size: 22,95 GB
- Windows Version: 5.1 [2600]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[13:48:51] PHASE ONE, Encoding
- [13:48:51] Processing: VID_00001 (1 of 24)
- [13:48:51] Extracting A/V streams [VID_00001]
- [13:49:06] Reencoding video [VID_00001]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.033 frames
- Bitrate: 15.344 Kbs
- [13:49:06] Reencoding: VID_00001, Pass 1 of 1
- [13:50:36] Video Encode complete
- [13:50:36] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [13:50:36] Multiplexing M2TS
- [13:50:44] Processing: VID_00003 (2 of 24)
- [13:50:44] Extracting A/V streams [VID_00003]
- [13:50:54] Reencoding video [VID_00003]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 689 frames
- Bitrate: 15.159 Kbs
- [13:50:54] Reencoding: VID_00003, Pass 1 of 1
- [13:51:53] Video Encode complete
- [13:51:53] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [13:51:53] Multiplexing M2TS
- [13:51:59] Processing: VID_00004 (3 of 24)
- [13:51:59] Extracting A/V streams [VID_00004]
- [13:54:03] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 11.228 frames
- Bitrate: 13.048 Kbs
- [13:54:03] Reencoding: VID_00004, Pass 1 of 1
- [14:08:01] Video Encode complete
- [14:08:01] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [14:08:01] Multiplexing M2TS
- [14:09:01] Processing: VID_00020 (4 of 24)
- [14:09:01] Extracting A/V streams [VID_00020]
- [14:09:11] Reencoding video [VID_00020]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 23,976fps, 1.368 frames
- Bitrate: 8.758 Kbs
- [14:09:11] Reencoding: VID_00020, Pass 1 of 1
- [14:10:46] Video Encode complete
- [14:10:46] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:10:46] Multiplexing M2TS
- [14:10:51] Processing: VID_00021 (5 of 24)
- [14:10:51] Extracting A/V streams [VID_00021]
- [14:11:05] Reencoding video [VID_00021]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.869 frames
- Bitrate: 6.002 Kbs
- [14:11:05] Reencoding: VID_00021, Pass 1 of 1
- [14:12:37] Video Encode complete
- [14:12:37] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:12:37] Multiplexing M2TS
- [14:12:45] Processing: VID_00029 (6 of 24)
- [14:12:45] Extracting A/V streams [VID_00029]
- [14:12:58] Reencoding video [VID_00029]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.573 frames
- Bitrate: 6.804 Kbs
- [14:12:58] Reencoding: VID_00029, Pass 1 of 1
- [14:14:19] Video Encode complete
- [14:14:19] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:14:19] Multiplexing M2TS
- [14:14:26] Processing: VID_00449 (7 of 24)
- [14:14:26] Extracting A/V streams [VID_00449]
- [14:14:38] Reencoding video [VID_00449]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.017 frames
- Bitrate: 8.536 Kbs
- [14:14:38] Reencoding: VID_00449, Pass 1 of 1
- [14:17:16] Video Encode complete
- [14:17:16] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:17:16] Multiplexing M2TS
- [14:17:21] Processing: VID_00450 (8 of 24)
- [14:17:21] Extracting A/V streams [VID_00450]
- [14:17:32] Reencoding video [VID_00450]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.921 frames
- Bitrate: 8.536 Kbs
- [14:17:32] Reencoding: VID_00450, Pass 1 of 1
- [14:19:41] Video Encode complete
- [14:19:41] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:19:41] Multiplexing M2TS
- [14:19:47] Processing: VID_00451 (9 of 24)
- [14:19:47] Extracting A/V streams [VID_00451]
- [14:20:08] Reencoding video [VID_00451]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 3.529 frames
- Bitrate: 8.538 Kbs
- [14:20:08] Reencoding: VID_00451, Pass 1 of 1
- [14:24:31] Video Encode complete
- [14:24:31] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:24:31] Multiplexing M2TS
- [14:24:40] Processing: VID_00452 (10 of 24)
- [14:24:40] Extracting A/V streams [VID_00452]
- [14:24:55] Reencoding video [VID_00452]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.989 frames
- Bitrate: 8.797 Kbs
- [14:24:55] Reencoding: VID_00452, Pass 1 of 1
- [14:28:30] Video Encode complete
- [14:28:30] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:28:30] Multiplexing M2TS
- [14:28:36] Processing: VID_00453 (11 of 24)
- [14:28:36] Extracting A/V streams [VID_00453]
- [14:28:47] Reencoding video [VID_00453]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.921 frames
- Bitrate: 8.536 Kbs
- [14:28:47] Reencoding: VID_00453, Pass 1 of 1
- [14:31:14] Video Encode complete
- [14:31:14] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:31:14] Multiplexing M2TS
- [14:31:19] Processing: VID_00501 (12 of 24)
- [14:31:19] Extracting A/V streams [VID_00501]
- [14:36:23] Reencoding video [VID_00501]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 30.664 frames
- Bitrate: 14.862 Kbs
- [14:36:23] Reencoding: VID_00501, Pass 1 of 1
- [15:17:10] Video Encode complete
- [15:17:10] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [15:17:10] Multiplexing M2TS
- [15:23:13] Processing: VID_00502 (13 of 24)
- [15:23:13] Extracting A/V streams [VID_00502]
- [15:39:52] Reencoding video [VID_00502]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 115.939 frames
- Bitrate: 12.539 Kbs
- [15:39:52] Reencoding: VID_00502, Pass 1 of 1
- [18:07:40] Video Encode complete
- [18:07:41] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [18:07:42] Multiplexing M2TS
- [18:23:09] Processing: VID_00503 (14 of 24)
- [18:23:09] Extracting A/V streams [VID_00503]
- [18:25:38] Reencoding video [VID_00503]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 14.271 frames
- Bitrate: 14.830 Kbs
- [18:25:39] Reencoding: VID_00503, Pass 1 of 1
- [18:51:44] Video Encode complete
- [18:51:44] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [18:51:44] Multiplexing M2TS
- [18:52:49] Processing: VID_00504 (15 of 24)
- [18:52:49] Extracting A/V streams [VID_00504]
- [18:53:01] Reencoding video [VID_00504]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 739 frames
- Bitrate: 14.918 Kbs
- [18:53:01] Reencoding: VID_00504, Pass 1 of 1
- [18:54:33] Video Encode complete
- [18:54:33] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [18:54:33] Multiplexing M2TS
- [18:54:40] Processing: VID_00505 (16 of 24)
- [18:54:40] Extracting A/V streams [VID_00505]
- [18:57:20] Reencoding video [VID_00505]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 15.436 frames
- Bitrate: 14.732 Kbs
- [18:57:20] Reencoding: VID_00505, Pass 1 of 1
- [19:31:10] Video Encode complete
- [19:31:10] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [19:31:11] Multiplexing M2TS
- [19:32:17] Processing: VID_00506 (17 of 24)
- [19:32:17] Extracting A/V streams [VID_00506]
- [19:32:27] Reencoding video [VID_00506]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 689 frames
- Bitrate: 15.159 Kbs
- [19:32:27] Reencoding: VID_00506, Pass 1 of 1
- [19:33:49] Video Encode complete
- [19:33:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [19:33:50] Multiplexing M2TS
- [19:33:56] Processing: VID_00507 (18 of 24)
- [19:33:56] Extracting A/V streams [VID_00507]
- [19:34:07] Reencoding video [VID_00507]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 739 frames
- Bitrate: 14.918 Kbs
- [19:34:07] Reencoding: VID_00507, Pass 1 of 1
- [19:35:38] Video Encode complete
- [19:35:38] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [19:35:38] Multiplexing M2TS
- [19:35:44] Processing: VID_00508 (19 of 24)
- [19:35:44] Extracting A/V streams [VID_00508]
- [19:36:00] Reencoding video [VID_00508]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.172 frames
- Bitrate: 15.281 Kbs
- [19:36:00] Reencoding: VID_00508, Pass 1 of 1
- [19:38:22] Video Encode complete
- [19:38:22] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [19:38:22] Multiplexing M2TS
- [19:38:30] Processing: VID_00509 (20 of 24)
- [19:38:30] Extracting A/V streams [VID_00509]
- [19:38:39] Reencoding video [VID_00509]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 631 frames
- Bitrate: 14.791 Kbs
- [19:38:39] Reencoding: VID_00509, Pass 1 of 1
- [19:39:57] Video Encode complete
- [19:39:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [19:39:57] Multiplexing M2TS
- [19:40:03] Processing: VID_00510 (21 of 24)
- [19:40:03] Extracting A/V streams [VID_00510]
- [19:40:14] Reencoding video [VID_00510]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 903 frames
- Bitrate: 15.235 Kbs
- [19:40:14] Reencoding: VID_00510, Pass 1 of 1
- [19:42:02] Video Encode complete
- [19:42:02] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [19:42:02] Multiplexing M2TS
- [19:42:09] Processing: VID_00511 (22 of 24)
- [19:42:09] Extracting A/V streams [VID_00511]
- [19:44:42] Reencoding video [VID_00511]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 12.371 frames
- Bitrate: 14.419 Kbs
- [19:44:42] Reencoding: VID_00511, Pass 1 of 1
- [20:09:39] Video Encode complete
- [20:09:39] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [20:09:39] Multiplexing M2TS
- [20:10:30] Processing: VID_00512 (23 of 24)
- [20:10:30] Extracting A/V streams [VID_00512]
- [20:10:40] Reencoding video [VID_00512]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 689 frames
- Bitrate: 15.159 Kbs
- [20:10:40] Reencoding: VID_00512, Pass 1 of 1
- [20:12:06] Video Encode complete
- [20:12:06] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (spa): Keeping original audio
- [20:12:06] Multiplexing M2TS
- [20:12:12] Processing: VID_04321 (24 of 24)
- [20:12:12] Extracting A/V streams [VID_04321]
- [20:12:18] Reencoding video [VID_04321]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.440 frames
- [20:12:19] Reencoding: VID_04321, Pass 1 of 1
- [20:13:19] Video Encode complete
- [20:13:19] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- [20:13:19] Multiplexing M2TS
[20:13:26]PHASE ONE complete
[20:13:26]PHASE TWO - Rebuild Started
- [20:13:27] Rebuilding BD file Structure
- [20:14:07] CorrectMPLS() 00009 2408
[23:35:02] - Aborted at user request

[jdobbs]

Hi

This is the first time I have problems with a movie. Let me know if you need more info.

I picked that disc up earlier today and haven't run it yet. I'll give it a test.

[jdobbs]

Hi

This is the first time I have problems with a movie. Let me know if you need more info.

We may have to wait on this... my disc doesn't seem to be playable even before running BD-RB (after ripping with AnyDVD HD).

I can't be involved in any kind of protection circumvention... so I'll have to leave this to others.

[NightHawkGuy]

We may have to wait on this... my disc doesn't seem to be playable even before running BD-RB (after ripping with AnyDVD HD).

I can't be involved in any kind of protection circumvention... so I'll have to leave this to others.

I've noticed reports of the Hunger Games having a new type of protection and fake playlists causing the decrypter software problems. I've observed they have been releasing new versions of the major blu-ray decryption software almost daily the past week, so it might be awhile before this particular title is supported completely by the decrypters.

[DMagic1]

Using v0.41.01

BDR keeps auto selecting the AC3 audio instead of the True_HD audio track even though I have keep HD audio selected. Previous versions would auto select the TrueHD if I'm not mistaken.
The projects with this issue did show the TrueHD audio track as AUD_002 where as in the past I seems like the HD track was AUD_001.

[Ch3vr0n]

@nighthawk: anydvd supports this disc with playlist obfuscation just fine :-)

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[jdobbs]

@nighthawk: anydvd supports this disc with playlist obfuscation just fine :-)

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk Except the resulting output doesn't play (at least with PowerDVD 11)... I'm not sure I would call that "supports". It opens to a blank screen and nothing ever happens.

You can select a playlist and do a movie-only backup however.

[jdobbs]

Using v0.41.01

BDR keeps auto selecting the AC3 audio instead of the True_HD audio track even though I have keep HD audio selected. Previous versions would auto select the TrueHD if I'm not mistaken.
The projects with this issue did show the TrueHD audio track as AUD_002 where as in the past I seems like the HD track was AUD_001. I just tested it. It works for me. However, if you have "Limit to one track for each language" selected in SETUP -- it will pick the first one in the list regardless of type. That's usually the True-HD one, but not necessarily. If the first track is standard AC3 and you want to keep the True-HD instead, you have to manually pick it.

[Ch3vr0n]

weird, cause on the slysoft forums there arent messages about being unplayable rips works fine on PDVD 10 & 12. But be warned, do NOT update to the latest 1905 build for PDVD12. It contains CINAVIA DETECTION. No joke, the first software player that detects it has been born.

[jdobbs]

weird, cause on the slysoft forums there arent messages about being unplayable rips works fine on PDVD 10 & 12. But be warned, do NOT update to the latest 1905 build for PDVD12. It contains CINAVIA DETECTION. No joke, the first software player that detects it has been born. Hmmm... at least that'll make it easer for someone to reverse engineer it.

[DMagic1]

I just tested it. It works for me. However, if you have "Limit to one track for each language" selected in SETUP -- it will pick the first one in the list regardless of type. That's usually the True-HD one, but not necessarily. If the first track is standard AC3 and you want to keep the True-HD instead, you have to manually pick it.

Yes I do have limit to one track for each selected.
Thanks, I will have to keep and eye out for those that appear as the second track.

[jdobbs]

Yes I do have limit to one track for each selected.
Thanks, I will have to keep and eye out for those that appear as the second track. I'll look into a routine that scans and picks the "better" audio track as opposed to the first one.

[setarip_old]

@jdobbs re: HUNGER GAMES

Except the resulting output doesn't play (at least with PowerDVD 11)... I'm not sure I would call that "supports". It opens to a blank screen and nothing ever happens.As you stated early on in this thread (and many times since then), don't arrive at conclusions based on using a software player.

Throughout the beta testing period I've had a plethora of FULL DISK backups (all or most of which used Java menuing) that, while not playing properly or at all from either burned disc or hard drive under PowerDVD, played properly on standalone players...

[laserfan]

But be warned, do NOT update to the latest 1905 build for PDVD12. It contains CINAVIA DETECTION. No joke, the first software player that detects it has been born.
This and setarip's post inspire me to ask: are people here using Arcsoft TMT5 to check discs on their computers? I was thinking about upgrading but read somewhere that latest 5.3.1.144 or 146 does not play BD5 or BD9 discs.

[jdobbs]

@jdobbs re: HUNGER GAMES

As you stated early on in this thread (and many times since then), don't arrive at conclusions based on using a software player.

Throughout the beta testing period I've had a plethora of FULL DISK backups (all or most of which used Java menuing) that, while not playing properly or at all from either burned disc or hard drive under PowerDVD, played properly on standalone players... Yeah. I can test my backup copy I guess on a standalone, but I don't have a 50GB BD-RW to test AnyDVDs output.

[A.Fenderson]

I have one of these (http://www.amazon.com/Maxell-Blu-ray-Rewritble-Dual-Layer/dp/B002K8MC9C/ref=sr_1_2?ie=UTF8&qid=1346281982&sr=8-2&keywords=bd-re+dl)and have had good luck with it, though I don't use it all that often. Just made a donation to cover the cost. Thanks for your continued work on BD-RB!

[[SLiM]D12]

Yeah. I can test my backup copy I guess on a standalone, but I don't have a 50GB BD-RW to test AnyDVDs output.

It's def AnyDVD. You need to make sure you're using the latest version to get by the playlist obfuscation. I've backed up Hunger Games (Full Backup) and it plays fine in PowerDVD 12 for me and on standalone (ps3).

Now, not to imply anything, but if you've "stumbled" across a downloaded release that was ripped with an older version of AnyDVD, you cannot make it work. Need the original with encryption in tact to re-run thru AnyDVD. I'm not at all condoning piracy, but want to weed out those that have downloaded a source that was not ripped correctly to begin with, and could be leading to false reports of BD-RB not working.

My point being, BD-RB is not the culprit here, it's the way the source was ripped.

[jdobbs]

D12;1589078']It's def AnyDVD. You need to make sure you're using the latest version to get by the playlist obfuscation. I've backed up Hunger Games (Full Backup) and it plays fine in PowerDVD 12 for me and on standalone (ps3).

Now, not to imply anything, but if you've "stumbled" across a downloaded release that was ripped with an older version of AnyDVD, you cannot make it work. Need the original with encryption in tact to re-run thru AnyDVD. I'm not at all condoning piracy, but want to weed out those that have downloaded a source that was not ripped correctly to begin with, and could be leading to false reports of BD-RB not working.

My point being, BD-RB is not the culprit here, it's the way the source was ripped. I'm using AnyDVD HD v7.0.7.0 (the latest official release). No "stumbling" here -- this is a real original disc.

[[SLiM]D12]

I'm using AnyDVD HD v7.0.7.0 (the latest official release). No "stumbling" here -- this is a real original disc.

I quoted your post, but my post wasn't aimed at you. It was aimed at others claiming BD-RB was the problem when it's not.

I used the 7.0.7.2 beta.

[jdobbs]

I have one of these (http://www.amazon.com/Maxell-Blu-ray-Rewritble-Dual-Layer/dp/B002K8MC9C/ref=sr_1_2?ie=UTF8&qid=1346281982&sr=8-2&keywords=bd-re+dl)and have had good luck with it, though I don't use it all that often. Just made a donation to cover the cost. Thanks for your continued work on BD-RB!Thanks, much appreciated. I just ordered it...

[LowDead]

This and setarip's post inspire me to ask: are people here using Arcsoft TMT5 to check discs on their computers? I was thinking about upgrading but read somewhere that latest 5.3.1.144 or 146 does not play BD5 or BD9 discs.

That is sadly correct. A really good media player otherwise.

/LD

[laserfan]

That is sadly correct. A really good media player otherwise.
Sorry that this is off-topic, but if anyone knows, then people in this thread do: with what revision did Arcsoft TMT5 stop playing BD-on-DVD?

[jdobbs]

@jdobbs re: HUNGER GAMES

As you stated early on in this thread (and many times since then), don't arrive at conclusions based on using a software player.

Throughout the beta testing period I've had a plethora of FULL DISK backups (all or most of which used Java menuing) that, while not playing properly or at all from either burned disc or hard drive under PowerDVD, played properly on standalone players... Just so you know... it does the same on my standalone players. Blank screen, clock is at "00:00" an no actions seem to change it.

[RobertM]

I'm using AnyDVD HD v7.0.7.0 (the latest official release).
A new release was just made today; v7.0.8.0. They said that there was a menu bug in v7.0.7, so perhaps this problem has gone away now.

[Ch3vr0n]

A new release was just made today; v7.0.8.0. They said that there was a menu bug in v7.0.7, so perhaps this problem has gone away now.


True, but if you would have read the patchnotes you would have seen that it was a bug with DVDs and not blurays. So the relevance to bdrb here is nonexistent.

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[jdobbs]

A new release was just made today; v7.0.8.0. They said that there was a menu bug in v7.0.7, so perhaps this problem has gone away now.I'll go to the Slysoft site and download it just for giggles -- especially since [SLiM]D12 said that v7.0.7.2 worked on his copy.

Interesting that I haven't gotten a notice from AnyDVD HD that a new version is available... I usuallly do.

[Edit] I stand corrected. I just switched over to my video PC and the notice was showing.

[rccland]

Problem disc: Lord of the Rings Extended, Return of the King, feature disc #2 (part two).

Error Condition (popup): "BD Rebuilder experienced an error 2403 [19:29:13] CorrectMPLS() 00006 2403".

This occurs when the rebuild process is practically 100% complete. The first time this happened, I reran BD-RB and chose to continue with the existing project (many times): it always failed at the exact same point (that log is still available upon request). I therefore reripped the disc (via Any DVD-HD, up-to-date, and with no subsequent preprocessing of any kind): this second rip is the one used in the present error report. Upon request of jdobbs I can run checksums of each of the two rips to verify whether they are bit-identical.

The resultant build looks complete from rough eye-balling, and if it's selected as *input* for BD-RB it is accepted as a valid BD source. When burned to BD-RE, though, a quick (not comprehensive) check via chapter skip etc shows that it played fine (menus work, audio & video both good, navigation, etc) with the exception of one 5-minute & 50-second segment that is an easter-egg accessible from the (full) main menu (aka "disc menu") thus: Special Features > (picture of One Ring). In my Panasonic DMP-BD45, selecting this goes briefly to a black screen then returns to the menu. In Cyberlink Power DVD 8, I instead get a completely black, no-audio segment of the proper length (5min 50s) followed by a return to the menu. I have verified that the stream in question is on the disc and plays perfectly when opened in Media Player Classic Home Theater and/or VLC: it is an SD-resolution clip that is originally in MPEG-2 480i, and after reeencode is AVC 480p29.97, which seems to be an invalid format for a primary video stream according to info found in this thread (http://forum.doom9.org/showthread.php?t=154533). Note that "Use DEINTERLACER on interlaced sources" was chosen in the setup menu, and I believe it's the default option: in this case it was applied despite the fact that it seems to have brought the resultant clip out of BD-compliant format for a primary video stream.

BD-REBUILDER.LOG:

----------------------
[07/06/12] BD Rebuilder v0.40.10 (beta)
[12:17:04] Source: THE_RETURN_OF_THE_KING_EXT_PT2
- Input BD size: 37.27 GB
- Approximate total content: [02:24:11.117]
- Target BD size: 22.95 GB
- Windows Version: 5.1 [2600]
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[12:17:04] PHASE ONE, Encoding
- [12:17:04] Processing: VID_00007 (1 of 2)
- [12:17:04] Extracting A/V streams [VID_00007]
- [12:17:14] Reencoding video [VID_00007]
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 10,503 frames
- Bitrate: 2,352 Kbs
- [12:17:14] Reencoding: VID_00007, Pass 1 of 2
- [12:19:57] Reencoding: VID_00007, Pass 2 of 2
- [12:29:49] Video Encode complete
- [12:29:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [12:29:49] Multiplexing M2TS
- [12:29:55] Processing: VID_00008 (2 of 2)
- [12:29:55] Extracting A/V streams [VID_00008]
- [12:38:28] Reencoding video [VID_00008]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 195,056 frames
- Bitrate: 19,688 Kbs
- [12:38:28] Reencoding: VID_00008, Pass 1 of 2
- [17:38:03] Reencoding: VID_00008, Pass 2 of 2
- [19:05:41] Video Encode complete
- [19:05:41] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4354 (eng): Keeping original audio
- Track 4355 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- [19:05:41] Multiplexing M2TS
[19:29:05]PHASE ONE complete
[19:29:05]PHASE TWO - Rebuild Started
- [19:29:05] Rebuilding BD file Structure
- [19:29:13] CorrectMPLS() 00006 2403
[03:48:50] - Aborted at user request


Note that I never clicked the Abort button, simply the OK button on the pop-up error message.

THE_RETURN_OF_THE_KING_EXT_PT2.INF:
[Status]
LABEL=THE_RETURN_OF_THE_KING_EXT_PT2
VERSION=v0.40.10 (beta)
SOURCE_SIZE=40020441711
SOURCE_VIDEO_SIZE=39798835200
TARGET_SIZE=24641536000
REDUCTION=.613584024916388
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=eng;
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=2
REBUILD_COMPLETE=0
[00007]
AUDIO=1
PGS=100
SCAN=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=121902201
RATE=2352
SPLITS=1
NSTART=27000000
NEND=42769440
NSIZE=121878528
FLINK=0
MLINK=0
[00008]
AUDIO=101111
PGS=10011110
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=24298027288
RATE=19688
SPLITS=1
NSTART=27000000
NEND=393144480
NSIZE=23746486272
FLINK=0
MLINK=0

Inspect.exe results:

- Windows Version: 5.1 [2600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.11.96.14], Ok
- FFDSHOW: [3882], Ok
- FFDSHOW VC-1 set "disabled", WMP11, Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.40.0.10, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

Thanks for your time. :)

edit:

@Audiophile1178: if I recall correctly, even playing from the original discs, the seamless branching feature in ST:TOS to allow switching between the original and updated effects doesn't actually work as intended (or at least as I imagined it should)--I believe I had to make the change in the pop-up menu and then restart the chapter for it ever to work properly.

Ran into the same issue as above with 0.41.0.1 (same disc " THE_RETURN_OF_THE_KING_EXT_PT2"). Please help :)

[jdobbs]

I'll go to the Slysoft site and download it just for giggles -- especially since [SLiM]D12 said that v7.0.7.2 worked on his copy.

Interesting that I haven't gotten a notice from AnyDVD HD that a new version is available... I usuallly do.

[Edit] I stand corrected. I just switched over to my video PC and the notice was showing. Same behavior. If I disable AnyDVD and attempt to play the disc I get a "Loading" screen followed by a warning telling me that I need to be connected to a HDMI port etc... which is no surprise. If AnyDVD is enabled the disc just sits at a blank screen.

The status screen in AnyDVD HD tells me everything is ok and that it has removed the protection etc. It also tells me the good playlist.

[jdobbs]

Ran into the same issue as above with 0.41.0.1 (same disc " THE_RETURN_OF_THE_KING_EXT_PT2"). Please help :) There's some kind of error in attempting to update the MPLS file. I'd forgotten about that one, I'll take a look at the MPLS and see what's happening.

[bassnut]

I have been having the same error CorrectMPLS() 00009 2403 with The Hunger Games. This seems to come after the disk has been compiled and a quick glance at the mpls files in the original rip it is identical to the one that BDRebuilder has just finished. Even with the error the disk seems to have finished. Plays and chapters are working though I have not had a chance to sit down and watch the disk yet. Tomorrow or on the weekend possibly.

For those having issues with The Hunger Games there is a work around for the full disk back up....... delete 00321.mpls, copy 00076.mple and rename 00321.mpls ..... this will enable chapters and have the the chapters in propper order.

[Adbear]

Same behavior. If I disable AnyDVD and attempt to play the disc I get a "Loading" screen followed by a warning telling me that I need to be connected to a HDMI port etc... which is no surprise. If AnyDVD is enabled the disc just sits at a blank screen.

The status screen in AnyDVD HD tells me everything is ok and that it has removed the protection etc. It also tells me the good playlist.
You might want to report it to Slysoft along with a logfile and which country the disc is from so they can look in to it. I know there were at least 2 versions from the US 1 of which was definitely fixed

[rccland]

There's some kind of error in attempting to update the MPLS file. I'd forgotten about that one, I'll take a look at the MPLS and see what's happening.

That would be great if you can take a look. thank you.

[Aspagilus]

Multi angle disc problem. Pirates Band of Misfits can't be read propperly. The movie it self is made of several files, but the latest version locates only the very first of them and also only outputs that file. Happens in both full disc and movie only modes.

[jdobbs]

Multi angle disc problem. Pirates Band of Misfits can't be read propperly. The movie it self is made of several files, but the latest version locates only the very first of them and also only outputs that file. Happens in both full disc and movie only modes. In full disc mode it doesn't "locate" anything. It will have the exact same structure as the original. You may want to check and make sure your deencrypted source is actually functioning.

[jdobbs]

I have been having the same error CorrectMPLS() 00009 2403 with The Hunger Games. This seems to come after the disk has been compiled and a quick glance at the mpls files in the original rip it is identical to the one that BDRebuilder has just finished. Even with the error the disk seems to have finished. Plays and chapters are working though I have not had a chance to sit down and watch the disk yet. Tomorrow or on the weekend possibly.

For those having issues with The Hunger Games there is a work around for the full disk back up....... delete 00321.mpls, copy 00076.mple and rename 00321.mpls ..... this will enable chapters and have the the chapters in propper order.That's a different error... the other one was an "overflow error" (00006) and yours is a "subscript out of range" error (00009). I believe that can only happen if the original is corrupt and one of the internal MPLS's indexes is wrong, but I'll double check. Hmm... odd that these are popping up all at once. That code is executed for every full backup... and it is a small section of code.

I wouldn't trust an MPLS that got an error. That means it was never updated with new information (like a change in video type, audio type, etc). If BD-RB is updating it, that means it shouldn't match the original after updating... BD-RB doesn't attempt to update MPLSs that don't require changes in the rebuild. You'd have to be extremely lucky for everything to "fall into place".

[CV91913]

I have used BD Rebuilder for 100's of Movie Only backups and it has worked like a charm. I just purchased the 2 disc Cleopatra set and decided to try (for the first time) to do my normal movie only and then a BD5 for the extras using your new edit mode. Disc 1 worked as expected and produced a 4.1 gb structure. Disc 2 did not work so well. The first disc had failrly small extras and I did 3 of them that totalled 7.08 GB. The second disc had 1 2hr extra and a couple of smaller ones which I kept 1 of for a total of 7.16 GB. The build completed without error but the resulting structure was 4.92 GB. Much too big. I tried it twice. Both of the resulting BD5 Stream directories have a boatload of very small files. Could that be the problem? I am including the logs.

@jdobbs
I know you are a busy, busy guy but do you have any thoughts on cause and how I might fix this?

[jdobbs]

@jdobbs
I know you are a busy, busy guy but do you have any thoughts on cause and how I might fix this? Can you post your config? I haven't seen a BD-RB oversize in a long, long time -- but there's quite a bit of new code in the blanking routines.

[CV91913]

Can you post your config? I haven't seen a BD-RB oversize in a long, long time -- but there's quite a bit of new code in the blanking routines.

Sorry...config? I included the logs in my original post. Are you requesting the .ini file or my system configuration? If you are talking about the .ini, I have done a number of builds since the extras build but will try to re-create it as is was for that build.

[Wizzu]

First fail among about 18 rebuilds with 0.41 on this machine...

Disc: INCEPTION (Europe)

99% through overall process, Encoding of segment VID_00037 fails:
error PredictAndEncode() 00013 2809

- Rate/Length: 23,976fps, 2.270 frames
- Bitrate: 16.044 Kbs
- [13:36:33] Reencoding: VID_00035, Pass 1 of 1
- [13:37:49] Video Encode complete
- [13:37:49] Processing: VID_00008 (29 of 31)
- [13:37:49] Extracting A/V streams [VID_00008]
- [13:38:04] Reencoding video [VID_00008]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 4.062 frames
- Bitrate: 6.998 Kbs
- [13:38:04] Reencoding: VID_00008, Pass 1 of 1
- [13:39:40] Video Encode complete
- [13:39:40] Processing: VID_00052 (30 of 31)
- [13:39:40] Extracting A/V streams [VID_00052]
- [13:39:46] Reencoding video [VID_00052]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 1.048 frames
- Bitrate: 4.772 Kbs
- [13:39:46] Reencoding: VID_00052, Pass 1 of 1
- [13:40:04] Video Encode complete
- [13:40:04] Processing: VID_00037 (31 of 31)
- [13:40:04] Extracting A/V streams [VID_00037]
- [13:40:23] Reencoding video [VID_00037]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 9.609 frames
- Bitrate: 3.648 Kbs
- [13:40:23] Reencoding: VID_00037, Pass 1 of 1
- Encode failed. Aborting.
- BD-Rebuilder v0.41.01 (beta)
- Windows Version: 5.1 [2600]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.11.96.14, Ok
- FFDSHOW: 3882, Ok
- [13:40:28] PredictAndEncode() 00013 2809
[13:41:12] - Aborted by user request

[jdobbs]

Sorry...config? I included the logs in my original post. Are you requesting the .ini file or my system configuration? If you are talking about the .ini, I have done a number of builds since the extras build but will try to re-create it as is was for that build. The contents of your BDREBUILDER.INI file (in the installation folder) is your config file.

[CV91913]

The contents of your BDREBUILDER.INI file (in the installation folder) is you config file. OK...I think that it is the same as when I tried to do the Extras that was oversized.


[Options]
VERSION=0.41.0.1
MODE=0
ENABLE_TEST=1
ENCODE_QUALITY=2
ONEPASS_ENCODING=0
AUTO_QUALITY=1
TARGET_SIZE=4469
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=1
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
MOVIEONLY_TYPE=0
ALTCRF=20
ALT_TARGET=1024
ALTMETHOD=0
ALTAUTOCROP=0
ENABLE_BLANKING=1
[Paths]
WORKING_PATH=C:\USERS\PUBLIC\VIDEOS\BD5\
SOURCE_PATH=K:\RIPS\CLEOPATRA_DISC_2\

[jdobbs]

First fail among about 18 rebuilds with 0.41 on this machine...

Disc: INCEPTION (Europe)

99% through overall process, Encoding of segment VID_00037 fails:
error PredictAndEncode() 00013 2809

- Rate/Length: 23,976fps, 2.270 frames
- Bitrate: 16.044 Kbs
- [13:36:33] Reencoding: VID_00035, Pass 1 of 1
- [13:37:49] Video Encode complete
- [13:37:49] Processing: VID_00008 (29 of 31)
- [13:37:49] Extracting A/V streams [VID_00008]
- [13:38:04] Reencoding video [VID_00008]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 4.062 frames
- Bitrate: 6.998 Kbs
- [13:38:04] Reencoding: VID_00008, Pass 1 of 1
- [13:39:40] Video Encode complete
- [13:39:40] Processing: VID_00052 (30 of 31)
- [13:39:40] Extracting A/V streams [VID_00052]
- [13:39:46] Reencoding video [VID_00052]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 1.048 frames
- Bitrate: 4.772 Kbs
- [13:39:46] Reencoding: VID_00052, Pass 1 of 1
- [13:40:04] Video Encode complete
- [13:40:04] Processing: VID_00037 (31 of 31)
- [13:40:04] Extracting A/V streams [VID_00037]
- [13:40:23] Reencoding video [VID_00037]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23,976fps, 9.609 frames
- Bitrate: 3.648 Kbs
- [13:40:23] Reencoding: VID_00037, Pass 1 of 1
- Encode failed. Aborting.
- BD-Rebuilder v0.41.01 (beta)
- Windows Version: 5.1 [2600]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.11.96.14, Ok
- FFDSHOW: 3882, Ok
- [13:40:28] PredictAndEncode() 00013 2809
[13:41:12] - Aborted by user request The real error is that the encode failed... which is normally due to system instability. If you are overclocked, your system needs to be adjusted. If not, you need to look at your cooling (heatsink etc.).

If you decide to edit the log because it is long... please leave in the useful part from the beginning so I can get some idea of what parameters you are using...

[aneurysm]

Quote:
Originally Posted by aneurysm View Post
hi, not sure if this is a bug or just something I do wrong.
I know the blanking is still experimental, but I find it working very well .. except when I do several discs at once in batch.

I select a disc, blank what I want, and choose "add to batch" .. and then open the next one and do the same, and so on.

The end result is that the stuff I selected for blanking isn't blanked. I find it weird, since when I look at a disc in the batch serie under it's settings, I do see for instance "blank=1101010101" , which I presume is blank first & second, keep third ...

Anyone else have the same issue ?


I'll check it out.

hey .. have you had any chance to check this out ? Not that urgent, but I have around 12 discs I want to queue :) Not interested in putting them all through multiavchd first before I can queue them in bd rebuilder.

[Wizzu]

Thanks for the reply. :-) The real error is that the encode failed... which is normally due to system instability. If you are overclocked, your system needs to be adjusted. If not, you need to look at your cooling (heatsink etc.).Not overclocked system, temps totally under control, and encoding fails only with this title and only at this exact point (tried 3 times in a row).

I've done lots of rebuilds on this machine already (prior to 0.41 and since), never a glitch. Since this fail with "Inception", I encoded 5 other movies without any problem.

If you decide to edit the log because it is long... please leave in the useful part from the beginning so I can get some idea of what parameters you are using...I thought I posted the full log, sorry, seems like half got lost in the cut/paste process... I just deleted the logs, damn. I'll re-launch the process and post back.

[Wizzu]

I'll re-launch the process and post back.Here it is. :-)
[09/01/12] BD Rebuilder v0.41.01 (beta)
[13:17:47] Source: INCEPTION_PLAYLIST_00101
- Input BD size: 37,14 GB
- Approximate total content: [03:10:20.241]
- Target BD size: 22,95 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640

[RobertM]

encoding fails only with this title and only at this exact point (tried 3 times in a row).

Are you sure it's not a bad rip? Perhaps a small scratch on the disc that gets through the rip process without error but causes problems during the re-encode.

[jdobbs]

Thanks for the reply. :-) Not overclocked system, temps totally under control, and encoding fails only with this title and only at this exact point (tried 3 times in a row).

I've done lots of rebuilds on this machine already (prior to 0.41 and since), never a glitch. Since this fail with "Inception", I encoded 5 other movies without any problem.

I thought I posted the full log, sorry, seems like half got lost in the cut/paste process... I just deleted the logs, damn. I'll re-launch the process and post back.After it fails, grab the command line from LASTCMD.TXT (in the BD Rebuilder installation folder) and try to execute it from a DOS CMD window. You should see what error X264 is returning. Either something is wrong with the source or something is wrong with your system. If X264 returns an error it is the source. If it crashes, it is your system. If it says something is wrong with the command line, the it is likely BD-RB. There's also a small chance that there is some issue in X264, but if that were the case (or the command line were at fault) it would likely be common to all encodes and I would be inundated with reports.

[Wizzu]

Are you sure it's not a bad rip?
I set Dvdfab so it doesn't skip errors and that it expressedly reports any reading error. But one can never be 100% sure, of course. I was actually thinking along the same lines.

I don't have the original disc at hand but will come back as soon as I can rip it again.

[Wizzu]

After it fails, grab the command line from LASTCMD.TXT (in the BD Rebuilder installation folder) and try to execute it from a DOS CMD window. You should see what error X264 is returning. Either something is wrong with the source or something is wrong with your system. If X264 returns an error it is the source. If it crashes, it is your system. If it says something is wrong with the command line, the it is likely BD-RB. There's also a small chance that there is some issue in X264, but if that were the case (or the command line were at fault) it would likely be common to all encodes and I would be inundated with reports.Thanks for the explanations. :)

Will try encoding the relevant file, check lastcmd.txt for more info and come back.

[Wizzu]

grab the command line from LASTCMD.TXT (in the BD Rebuilder installation folder) and try to execute it from a DOS CMD window. Trying this was kinda fun.

I'm by no means a command line expert. So as I pasted the command, I was at a total loss when my PC's integrated loudspeaker started beeping relentlessly for about a minute (apparently, a beep for each character in the command....) *LOL* :D And only part of the command (the first 32 characters) was actually pasted. Strange thing. I'll google/research this.

Starting over with a fresh rip didn't solve the issue BTW.

[jdobbs]

@A.Fenderson, m.rup & rccland

I fixed the "CorrectMPLS() 00006 2403" error that was mentioned earlier. It turns out I was using the wrong variable type for part of the timestamp processing in updating the MPLS and those reported discs has some unusually large values that caused it to overflow. It'll be included in a soon-to-be-released version.

[DVD Maniac]

Hi jdobbs.
Doing a movie only backup of Fringe Season 1 Disc 2. I prefer to backup each episode via selected Movie Only Playlist for all my series based discs and it usually works fine. With this one however I am given 2 Playlist choices, one at 3h 19, 32 chapters and one at 3h 17m 29 chapters. These I am guessing are 2 variants of the "Play All" option on the menu. There are actually 3 episodes on the disc but BDR does not seem to be locating the episode only playlists for these. Oh, I tried processing the first Play All playlist and it did indeed produce one single output of all 3 episodes together but thye sound goes out of sync from the 2nd episode.

Is there anything I can do to get BDR to offer up the episode only playlists?

[rccland]

@A.Fenderson, m.rup & rccland

I fixed the "CorrectMPLS() 00006 2403" error that was mentioned earlier. It turns out I was using the wrong variable type for part of the timestamp processing in updating the MPLS and those reported discs has some unusually large values that caused it to overflow. It'll be included in a soon-to-be-released version.

Ahh yes good old variable types (long double, long int etc.). Thanks for looking into this. Much appreciated. I will be anxiously waiting for the next beta release :)

[jdobbs]

Hi jdobbs.
Doing a movie only backup of Fringe Season 1 Disc 2. I prefer to backup each episode via selected Movie Only Playlist for all my series based discs and it usually works fine. With this one however I am given 2 Playlist choices, one at 3h 19, 32 chapters and one at 3h 17m 29 chapters. These I am guessing are 2 variants of the "Play All" option on the menu. There are actually 3 episodes on the disc but BDR does not seem to be locating the episode only playlists for these. Oh, I tried processing the first Play All playlist and it did indeed produce one single output of all 3 episodes together but thye sound goes out of sync from the 2nd episode.

Is there anything I can do to get BDR to offer up the episode only playlists? Is it possible you have set a large value for MIN_PLAYLIST_MINS (minimum playlist minutes) in the config file? Normally any playlist with over 15 minutes of content will be listed as a choice.

[setarip_old]

@jdobbs

Am I correct that each of the following examples would result in NO processing for DTSExpress audio?:

1) No entry in .INI file for DTSX_ENABLE=

2) Entry in .INI file ;DTSX_ENABLE=1

3) Entry in .INI file DTSX_ENABLE=0

[omegaman7]

Been a while since I've posted here :p

I seem to have a selective memory. I apologize for asking something which has likely been answered at least once before. But at least asking it, I'm 10X more likely to remember it LOL!
I'm dealing with a disc/s that has a video commentary track with a secondary DTS(express) track. No matter what I seem to do to the settings, it removes it regardless. '

It's "The Pacific" if that holds any relevance ;)

Is it because BD rebuilder believes it to be an exact duplicate track? Thereby not needing it?

[jdobbs]

@jdobbs

Am I correct that each of the following examples would result in NO processing for DTSExpress audio?:

1) No entry in .INI file for DTSX_ENABLE=

2) Entry in .INI file ;DTSX_ENABLE=1

3) Entry in .INI file DTSX_ENABLE=0 Correct. In fact any value other than DTSX_ENABLE=1 would result in no DTS Express processing. I usaully put a leader "#" when I want it disabled (#DTSX_ENABLE=1).

[jdobbs]

Been a while since I've posted here :p

I seem to have a selective memory. I apologize for asking something which has likely been answered at least once before. But at least asking it, I'm 10X more likely to remember it LOL!
I'm dealing with a disc/s that has a video commentary track with a secondary DTS(express) track. No matter what I seem to do to the settings, it removes it regardless. '

It's "The Pacific" if that holds any relevance ;)

Is it because BD rebuilder believes it to be an exact duplicate track? Thereby not needing it? You need to add DTSX_ENABLE=1 to the [Options] area of your config/ini file. It's disabled by default because the remuxing of the DTSX track is experimental and still doesn't work on some players. Wish I knew why... with a little luck maybe there is some smart person out there who can find what I can't. I've done a considerable amount of banging my head against that one.

[omegaman7]

I figured it was something like that. I just started looking for the option :S

Thanks!

[bassnut]

That's a different error... the other one was an "overflow error" (00006) and yours is a "subscript out of range" error (00009). I believe that can only happen if the original is corrupt and one of the internal MPLS's indexes is wrong, but I'll double check. Hmm... odd that these are popping up all at once. That code is executed for every full backup... and it is a small section of code.

I wouldn't trust an MPLS that got an error. That means it was never updated with new information (like a change in video type, audio type, etc). If BD-RB is updating it, that means it shouldn't match the original after updating... BD-RB doesn't attempt to update MPLSs that don't require changes in the rebuild. You'd have to be extremely lucky for everything to "fall into place".

Yup played the disk on Sat and it hangs .... Black screen right before the play menue comes on (LG BD551). I did test this on my PC and the disk did work, menue and all chapters(TMT3), never had a chance to test it on my Sony S360 before leaving home Friday but will try when I get home.

[dfsooner]

I have a number of selections I have authored with TMPgenc Authoring Works 4 (football games, actually) where I have created menus to select by quarters. When I compress them with BD_Rebuilder the menus no longer function. The m2ts files are compressed fine, however, (along with the menu file which is also m2ts).

TMPgenc reencodes all the original video to AVC.

The original plays fine with TMT3, but the reduced copy does not.

Is it your intention to make bd_rb work with selections not authored by the movie houses? If not, I understand.

One thing I did notice when comparing the before and after with BDedit is that the .clpi file for the BD-RB output is missing the IG stream. I believe this has the menu items.

JDobbs,

I believe you put a workaround in 37.04 for this but I have encountered it again. I have a BD authored with TMPGenc Authoring Works 5 that contains 5 m2ts files one of which is the menu. It is 302MB and the menus did not work after BDRB processing. I noticed the MIN_M2TS_SIZE parameter in Hidden Opts has a default of 100MB, so I figure if I changed it to 400 it would bypass processing of the menu. It didn't. Could something have changed to effectively ignore that option? When I enter it into BDREBUILDER.INI, should it have shown up in the .inf file? It doesn't.

[jdobbs]

JDobbs,

I believe you put a workaround in 37.04 for this but I have encountered it again. I have a BD authored with TMPGenc Authoring Works 5 that contains 5 m2ts files one of which is the menu. It is 302MB and the menus did not work after BDRB processing. I noticed the MIN_M2TS_SIZE parameter in Hidden Opts has a default of 100MB, so I figure if I changed it to 400 it would bypass processing of the menu. It didn't. Could something have changed to effectively ignore that option? When I enter it into BDREBUILDER.INI, should it have shown up in the .inf file? It doesn't. If you have DTSX_ENABLE=1 in your INI, try setting it to "0". That flag also instructs BD-RB to attempt to demux/remux IGS streams.

[dfsooner]

If you have DTSX_ENABLE=1 in your INI, try setting it to "0". That flag also instructs BD-RB to attempt to demux/remux IGS streams.

I don't use that option (see below).

FYI. When I replaced the .m2ts, .clpi, and .mpls files with the originals, everything plays fine.


[Options]
VERSION=0.41.0.1
MODE=0
ENCODE_QUALITY=2
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=8032
PRIORITY_CLASS=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;fra;ger;spa;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=1
USE_LAVF=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
AUTO_BLANK=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
QUICK_EXTRAS=0
UNMASK_CHAPTER=1
COMPLETION_BEEP=1
DGDECNV=0
MIN_M2TS_SIZE=400
[Paths]
WORKING_PATH=D:\BD_REBUILDER WORKFILES\
SOURCE_PATH=F:\OU FOOTBALL\GAMES\2012\01 UTEP\

[greslogo]

I seem to be having issues with Battleship_DOM, using current BDR and the previous version (I just upgraded, yesterday. Movie Only.

Ripped using the latest AnyDVDV.


----------------------
[09/03/12] BD Rebuilder v0.41.01 (beta)
[11:12:06] Source: BATTLESHIP_DOM_PLAYLIST_00800
- Input BD size: 25.85 GB
- Approximate total content: [02:11:21.915]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DGDecNV [2-way]
- Audio Settings: AC3=1 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[11:12:09] PHASE ONE, Encoding
- [11:12:09] Processing: VID_00131 (8 of 47)
- [11:12:09] Reencoding video [VID_00131]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 17,414 frames
- Bitrate: 19,358 Kbs
- [11:12:09] Reencoding: VID_00131, Pass 1 of 1
- [11:25:18] Video Encode complete
- [11:25:18] Processing: VID_00110 (9 of 47)
- [11:25:18] Extracting A/V streams [VID_00110]
- [11:25:28] Reencoding video [VID_00110]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,803 frames
- Bitrate: 22,326 Kbs
- [11:25:28] Reencoding: VID_00110, Pass 1 of 1
- [11:27:35] Video Encode complete
- [11:27:35] Processing: VID_00132 (10 of 47)
- [11:27:35] Extracting A/V streams [VID_00132]
- [11:27:44] Reencoding video [VID_00132]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,522 frames
- Bitrate: 18,791 Kbs
- [11:27:44] Reencoding: VID_00132, Pass 1 of 1
- [11:29:33] Video Encode complete
- [11:29:33] Processing: VID_00111 (11 of 47)
- [11:29:33] Extracting A/V streams [VID_00111]
- [11:29:39] Reencoding video [VID_00111]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 601 frames
- Bitrate: 20,685 Kbs
- [11:29:39] Reencoding: VID_00111, Pass 1 of 1
- [11:30:06] Video Encode complete
- [11:30:06] Processing: VID_00133 (12 of 47)
- [11:30:06] Extracting A/V streams [VID_00133]
- [11:30:27] Reencoding video [VID_00133]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 9,239 frames
- Bitrate: 18,997 Kbs
- [11:30:27] Reencoding: VID_00133, Pass 1 of 1
- [11:37:08] Video Encode complete
- [11:37:08] Processing: VID_00112 (13 of 47)
- [11:37:08] Extracting A/V streams [VID_00112]
- [11:37:16] Reencoding video [VID_00112]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,708 frames
- Bitrate: 19,072 Kbs
- [11:37:16] Reencoding: VID_00112, Pass 1 of 1
- [11:38:30] Video Encode complete
- [11:38:30] Processing: VID_00134 (14 of 47)
- [11:38:30] Extracting A/V streams [VID_00134]
- [11:38:45] Reencoding video [VID_00134]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5,286 frames
- Bitrate: 19,072 Kbs
- [11:38:45] Reencoding: VID_00134, Pass 1 of 1
- [11:42:34] Video Encode complete
- [11:42:34] Processing: VID_00113 (15 of 47)
- [11:42:34] Extracting A/V streams [VID_00113]
- [11:42:43] Reencoding video [VID_00113]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,241 frames
- Bitrate: 18,933 Kbs
- [11:42:43] Reencoding: VID_00113, Pass 1 of 1
- [11:44:20] Video Encode complete
- [11:44:20] Processing: VID_00135 (16 of 47)
- [11:44:20] Extracting A/V streams [VID_00135]
- [11:44:58] Reencoding video [VID_00135]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 18,450 frames
- Bitrate: 19,432 Kbs
- [11:44:58] Reencoding: VID_00135, Pass 1 of 1
- [11:58:58] Video Encode complete
- [11:58:58] Processing: VID_00114 (17 of 47)
- [11:58:58] Extracting A/V streams [VID_00114]
- [11:59:04] Reencoding video [VID_00114]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 496 frames
- Bitrate: 19,791 Kbs
- [11:59:04] Reencoding: VID_00114, Pass 1 of 1
- [11:59:28] Video Encode complete
- [11:59:28] Processing: VID_00136 (18 of 47)
- [11:59:28] Extracting A/V streams [VID_00136]
- [11:59:37] Reencoding video [VID_00136]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,166 frames
- Bitrate: 19,805 Kbs
- [11:59:37] Reencoding: VID_00136, Pass 1 of 1
- [12:01:07] Video Encode complete
- [12:01:07] Processing: VID_00115 (19 of 47)
- [12:01:07] Extracting A/V streams [VID_00115]
- [12:01:14] Reencoding video [VID_00115]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,275 frames
- Bitrate: 20,214 Kbs
- [12:01:14] Reencoding: VID_00115, Pass 1 of 1
- [12:02:09] Video Encode complete
- [12:02:09] Processing: VID_00034 (20 of 47)
- [12:02:09] Extracting A/V streams [VID_00034]
- [12:02:36] Reencoding video [VID_00034]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 12,227 frames
- Bitrate: 19,000 Kbs
- [12:02:36] Reencoding: VID_00034, Pass 1 of 1
- [12:11:26] Video Encode complete
- [12:11:26] Processing: VID_00116 (21 of 47)
- [12:11:26] Extracting A/V streams [VID_00116]
- Error in attempt to extract audio/subs.
- SmartLabs tsMuxeR. Version 1.10.6 http://www.smlabs.net
[12:11:35] - Failed to retrieve audio, aborted

I get 2 popups

tsmuxer.exe has stopped working

MPEG1 not supported

[Ch3vr0n]

I seem to be having issues with Battleship_DOM, using current BDR and the previous version (I just upgraded, yesterday. Movie Only.

Ripped using the latest AnyDVDV.


----------------------
[09/03/12] BD Rebuilder v0.41.01 (beta)
[11:12:06] Source: BATTLESHIP_DOM_PLAYLIST_00800
- Input BD size: 25.85 GB
- Approximate total content: [02:11:21.915]
- Target BD size: 22.95GB

.....


- Error in attempt to extract audio/subs.
- SmartLabs tsMuxeR. Version 1.10.6 http://www.smlabs.net
[12:11:35] - Failed to retrieve audio, aborted

I get 2 popups

tsmuxer.exe has stopped working

MPEG1 not supported

I hotly doubt that is an original disc. The volume name is not one studios would use, the source size also isn't right. Mine is 35GB + while yours is barely 25GB, combine that with that mpeg1 error and your looking at a downloaded movie most likely. Blurays don't use the MPEG1codec but among others MPEG2!!!


Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[greslogo]

This was a rental disc. I am rebuilding the Movie only. It was also restarted.

Resuming from previously started job.

[Ch3vr0n]

This was a rental disc. I am rebuilding the Movie only. It was also restarted.

Resuming from previously started job.

Rental discs don't use discnames like that either, i don't believe that it an original disc. Rental or storebought neither use a discname like that. Restarting a job won't give an error like that either.

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[omegaman7]

Indeed. I've never seen PLAYLIST in the disc title. I'd probably never rename it to that either. Unless to remind myself of a good working playlist.

[DVD Maniac]

Is it possible you have set a large value for MIN_PLAYLIST_MINS (minimum playlist minutes) in the config file? Normally any playlist with over 15 minutes of content will be listed as a choice.

Assuming the config file is "BDREBUILDER.INI" (Sorry to sound like the div kid @ school but I have yet to play around with these settings) then no I haven't changed the default. Other episode discs with run times per episode of 50 mins or abouts always seem to be OK - this is the first time I have had this issue.

BTW, can you confirm this is the correct config file with which to set my own custom settings for each job?

[greslogo]

I have no reason to lie. I rent and rip Blue-Rays to hard drive using AnyDVD. Then BDR, Movie Only.

Folder Structure on a hard drive

THE_HUNGER_GAMES

-BDMW
-CERIFICATE

I'm currently running The Hunger Games through BDR

[12:40:40] Source: THE_HUNGER_GAMES_PLAYLIST_00800
- Input BD size: 36.92 GB
- Approximate total content: [02:22:33.378]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DGDecNV [2-way]
- Audio Settings: AC3=1 DTS=0 HD=0 Kbs=640
[12:40:43] PHASE ONE, Encoding
- [12:40:43] Processing: VID_00450 (1 of 1)
- [12:40:43] Extracting A/V streams [VID_00450]
- [12:48:53] Reencoding video [VID_00450]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 205,076 frames
- Bitrate: 19,939 Kbs
- [12:48:54] Reencoding: VID_00450, Pass 1 of 1

[omegaman7]

I find it curious that the playlist is the same number. Though it is a common number I've noticed.

[Adbear]

What settings are you using in AnyDVD, as your disc titles are definitely wrong

[Ch3vr0n]

I have no reason to lie. I rent and rip Blue-Rays to hard drive using AnyDVD. Then BDR, Movie Only.

Folder Structure on a hard drive

THE_HUNGER_GAMES

-BDMW
-CERIFICATE

I'm currently running The Hunger Games through BDR

[12:40:40] Source: THE_HUNGER_GAMES_PLAYLIST_00800


Oh please you ain't fooling me. That's not an original discname for that either. And again the correct playlist for hunger games ain't 800. The only way ill believe that volume name is with a print screen of windows explorer with the disc inside the drive and not mounted in a virtual one. Combine that with what you're doing ripping rentals without owning the original yourself is pure movie piracy. I doubt you'll get any further "help" by anyone.


Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[greslogo]

CH3vr0n... If you can't find an explanation, then please refrain from commenting. The discs are ripped and have been returned days ago (rental for new movies is 1 day, here, at Videotron). I do own some Blue Rays. Curious what I will get with those, as far as BDR is showing as name/playlist.

To Omegaman7/Adbear... I don't recall every seeing the playlist as part of the name withing BDR. before. The last time I ripped/BDR'd was at the end of June (very little worth renting these days).

If you look at the video file that it aborted on, it's no even part of the playlist which is more baffling.

[12:11:26] Processing: VID_00116 (21 of 47)

AnyDVD is setup with the defaults. 7.8.0
Enable Blue Ray Support
Remove proh.....
Remove annoying.....
Disable BD Live
Remove Blue Ray region code-Automatic
Speedmenu is off.
Remove CD Digital Audio protection.

[greslogo]

I just put Spaceballs into my drive and I am getting the same type of name/playlist in BDR

[Adbear]

Well AnyDVD HD gets the name from the disc, so it's not AnyDVD HD that's putting it in.
If you try to play the original rips do they play back with full disc structure. Do they play the menu, then when you choose an option in the menu does the disc then play?

It appears to be BD rebuilder putting in the playlist text. I just tested making a 'movie only' on my system and the source comes up as 'A_TEAM_PLAYLIST_00801'
I don't normally do 'movie only' backups so I've never seen this before

You might want to check the file that's causing the encode to fail to see if it really is Mpeg1 or if the file is corrupt

[greslogo]

Ya, 116 seems to be buggered up. It's also only 79 kb's.

I made a mistake earlier..it is in the playlist. I didn't scroll far enough down in the BDR window.

If I knew how I could remove it from the playlist, that would be worth a try.

[omegaman7]

I've had bad rips due to my Lite-on drive iHES108. They made it through the encode, but there were problems with the output. E.g. the audio would be non existent in certain segments. Although the rip itself appeared fine. Apparently the audio encoder simply isn't noticing a problem. I only use that drive for quality scanning now. My LG WH10LS30 is also non trustworthy. It reads perfectly, but every burn is a coaster now. Thankfully, I put a 3yr warranty on the successor (WH12LS39). If this one quits prematurely, I may be done with LG drives. Which would suck, since I love the living room player BD640.

Ok. Now I see what's going on. Movie only mode causes the title to change :S

I see Adbear has also discovered this :p

[Adbear]

Ya, 116 seems to be buggered up. It's also only 79 kb's.

I made a mistake earlier..it is in the playlist. I didn't scroll far enough down in the BDR window.

If I knew how I could remove it from the playlist, that would be worth a try.
Sounds like you have a faulty file. If you remove the file then you'll have a part of the movie missing. You need to re-rip the movie

[Ch3vr0n]

If it's really BDRB that's doing that playlist thing then i owe you an apology. Sorry, it just looked too much like an illegitimate disc with that source name. That being said it does look like a corrupt rip, AFAIK BD's don't use MPEG1 codec but either MPEG2, AVC or VC-1.

[greslogo]

Accepted.

Unfortunately I do not have the disc anymore. The other 2 movies, I rented at the same, ripped and ran through BDR fine, though.

I've also had issues with Blue Ray burners in the past, but never read problems. Usually write issues where they won't play in stand alone players. Solution, replace the reader/burner.

[omegaman7]

Accepted.

Unfortunately I do not have the disc anymore. The other 2 movies, I rented at the same, ripped and ran through BDR fine, though.

I've also had issues with Blue Ray burners in the past, but never read problems. Usually write issues where they won't play in stand alone players. Solution, replace the reader/burner.

Try and find a fairly rough looking disc. Whether it rips it with ease, or struggle, is not exactly a determining factor. Bd Rebuilder(and tools) seems to be the true test. If it makes it through without consequence, you have yourself an agreeable reader ;) I've had discs that slowed to 2Mb/s. I assumed the rip went south. I've seen warps in the dyes already too. Tiny bubbled up areas.

[RobertM]

Yup. BDRB is definitely appending the playlist number to the disc label. I didn't notice before, but I just looked at the log history and this started happening with the latest BDRB release. Not sure if it only affects "movie only" backups; all my backups are movie-only.

[Ch3vr0n]

i did 5 rebuild so far in the past 2 days and it doesnt affect full disc backups nor movie+menu (with blanking) option. It's logical though, apart from blanking some shit out you keep the full disc structure so BDRB doesnt need a specific playlist to use

[jdobbs]

Rental discs don't use discnames like that either, i don't believe that it an original disc. Rental or storebought neither use a discname like that. Restarting a job won't give an error like that either.

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk The PLAYLIST portion of the name is added by BD-RB. I added it because there was no other way to know whether you were backing up the correct playlist, and I got tired of going back and reselecting over-and-over when I wasn't sure. It only applies to movie-only backups. From the change log:- Added the MPLS (playlist) number to the title section
of the stream list when MOVIE-ONLY mode is selected.
This is to avoid confusion as to which playlist is
active at any point in time. The playlist number
is also now displayed as a part of the batch list. It also makes it easier when you're backing up individual episodes from series disc (e.g. to MP4). That way you know which episodes have been done and which haven't.

[RobertM]

The PLAYLIST portion of the name is added by BD-RB.

Good to know! It's not a bug... it's a feature :)

(I suppose I should read the change log more often. I usually just upgrade and go. With never a complaint).

[sidneysides]

I know that BD-RB can't re encode 3D discs at the moment but should it be able to rebuild the file structure? I have a 35gb disc but when I untick all the foreign streams it comes in at less than 25gb. Should it be able to do this? Trie the disc but just gets past the language selection and then does nothing.

[AmigaFuture]

After AnyDVD (7.0.8.0) rips the movie, I've set BD-RB to blank the last 3 segments using:
[Options]
VERSION=0.41.0.1
MODE=0
ENCODE_QUALITY=0
MULTIPROCESS=0
FORCE_NOENCODE=1
MIN_M2TS_SIZE=10
MKV_MUXSUPS=1
ENABLE_TEST=1
ONEPASS_ENCODING=0
AUTO_QUALITY=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=1
AC3_REENCODE=0
AC3_640=0
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=10200
MOVIEONLY_TYPE=10
ALTCRF=20
ALT_TARGET=8200
ALTMETHOD=2
ALTAUTOCROP=0
VERBOSE_STATUS=1
TARGET_SIZE=23500
AUTO_BURN=0
ENABLE_BLANKING=1
QUICK_EXTRAS=0
[Paths]
SOURCE_PATH=J:\!BLU-RAY RIPS\BRAVEHEART_D1_AC\
WORKING_PATH=E:\BLU-RAY\REBUILDER\

I noticed the original size is 45.3GB (Stated by Directory Opus). The above BD-RB config outputs 2.42GB. Those 3 parts I blanked are "The High Definition Experience.." blah, blah..and 50.44MB each. The other is 0.15MB. Looking at the final directory I notice the movie M2TS isn't there. I didn't set BD-RB to blank the movie or the extras, only logos! So I had BD-RB do it again..not blanking anything.
----------------------
[09/04/12] BD Rebuilder v0.41.01 (beta)
[13:42:46] Source: BRAVEHEART_D1_AC
- Input BD size: 45.34 GB
- Approximate total content: [03:38:54.154]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Quality: Good (Very Fast), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[13:42:48] PHASE ONE, Encoding
- [13:42:48] Processing: VID_00003 (1 of 26)
- [13:42:48] Extracting A/V streams [VID_00003]
- [13:42:52] Reencoding video [VID_00003]
- [13:42:52] Keeping original video (no reencode)
- [13:42:52] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [13:42:52] Multiplexing M2TS
- [13:42:58] Processing: VID_00006 (2 of 26)
- [13:42:58] Extracting A/V streams [VID_00006]
- [13:55:35] Reencoding video [VID_00006]
- [13:55:35] Keeping original video (no reencode)
- [13:55:35] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4355 (eng): Keeping original audio
- [13:55:35] Multiplexing M2TS
- [14:16:46] Processing: VID_00011 (3 of 26)
- [14:16:46] Extracting A/V streams [VID_00011]
- [14:16:54] Reencoding video [VID_00011]
- [14:16:54] Keeping original video (no reencode)
- [14:16:54] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:16:54] Multiplexing M2TS
- [14:16:59] Processing: VID_00012 (4 of 26)
- [14:16:59] Extracting A/V streams [VID_00012]
- [14:17:06] Reencoding video [VID_00012]
- [14:17:06] Keeping original video (no reencode)
- [14:17:06] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:17:06] Multiplexing M2TS
- [14:17:12] Processing: VID_00013 (5 of 26)
- [14:17:12] Extracting A/V streams [VID_00013]
- [14:17:19] Reencoding video [VID_00013]
- [14:17:19] Keeping original video (no reencode)
- [14:17:19] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:17:19] Multiplexing M2TS
- [14:17:24] Processing: VID_00014 (6 of 26)
- [14:17:24] Extracting A/V streams [VID_00014]
- [14:17:31] Reencoding video [VID_00014]
- [14:17:31] Keeping original video (no reencode)
- [14:17:31] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:17:31] Multiplexing M2TS
- [14:17:36] Processing: VID_00015 (7 of 26)
- [14:17:36] Extracting A/V streams [VID_00015]
- [14:17:44] Reencoding video [VID_00015]
- [14:17:44] Keeping original video (no reencode)
- [14:17:44] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:17:44] Multiplexing M2TS
- [14:17:49] Processing: VID_00016 (8 of 26)
- [14:17:49] Extracting A/V streams [VID_00016]
- [14:17:56] Reencoding video [VID_00016]
- [14:17:56] Keeping original video (no reencode)
- [14:17:56] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:17:56] Multiplexing M2TS
- [14:18:01] Processing: VID_00017 (9 of 26)
- [14:18:01] Extracting A/V streams [VID_00017]
- [14:18:07] Reencoding video [VID_00017]
- [14:18:07] Keeping original video (no reencode)
- [14:18:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:18:07] Multiplexing M2TS
- [14:18:12] Processing: VID_00018 (10 of 26)
- [14:18:12] Extracting A/V streams [VID_00018]
- [14:18:19] Reencoding video [VID_00018]
- [14:18:19] Keeping original video (no reencode)
- [14:18:19] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:18:19] Multiplexing M2TS
- [14:18:24] Processing: VID_00019 (11 of 26)
- [14:18:24] Extracting A/V streams [VID_00019]
- [14:18:31] Reencoding video [VID_00019]
- [14:18:31] Keeping original video (no reencode)
- [14:18:31] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:18:31] Multiplexing M2TS
- [14:18:36] Processing: VID_00020 (12 of 26)
- [14:18:36] Extracting A/V streams [VID_00020]
- [14:18:43] Reencoding video [VID_00020]
- [14:18:43] Keeping original video (no reencode)
- [14:18:43] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:18:43] Multiplexing M2TS
- [14:18:48] Processing: VID_00021 (13 of 26)
- [14:18:48] Extracting A/V streams [VID_00021]
- [14:18:55] Reencoding video [VID_00021]
- [14:18:55] Keeping original video (no reencode)
- [14:18:55] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:18:55] Multiplexing M2TS
- [14:19:01] Processing: VID_00022 (14 of 26)
- [14:19:01] Extracting A/V streams [VID_00022]
- [14:19:07] Reencoding video [VID_00022]
- [14:19:07] Keeping original video (no reencode)
- [14:19:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:19:07] Multiplexing M2TS
- [14:19:11] Processing: VID_00023 (15 of 26)
- [14:19:11] Extracting A/V streams [VID_00023]
- [14:19:17] Reencoding video [VID_00023]
- [14:19:17] Keeping original video (no reencode)
- [14:19:17] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:19:17] Multiplexing M2TS
- [14:19:21] Processing: VID_00024 (16 of 26)
- [14:19:21] Extracting A/V streams [VID_00024]
- [14:19:28] Reencoding video [VID_00024]
- [14:19:28] Keeping original video (no reencode)
- [14:19:28] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:19:29] Multiplexing M2TS
- [14:19:34] Processing: VID_00025 (17 of 26)
- [14:19:34] Extracting A/V streams [VID_00025]
- [14:19:40] Reencoding video [VID_00025]
- [14:19:40] Keeping original video (no reencode)
- [14:19:40] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:19:40] Multiplexing M2TS
- [14:19:45] Processing: VID_00026 (18 of 26)
- [14:19:45] Extracting A/V streams [VID_00026]
- [14:19:53] Reencoding video [VID_00026]
- [14:19:53] Keeping original video (no reencode)
- [14:19:53] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:19:53] Multiplexing M2TS
- [14:19:58] Processing: VID_00027 (19 of 26)
- [14:19:58] Extracting A/V streams [VID_00027]
- [14:20:04] Reencoding video [VID_00027]
- [14:20:04] Keeping original video (no reencode)
- [14:20:04] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:20:04] Multiplexing M2TS
- [14:20:08] Processing: VID_00028 (20 of 26)
- [14:20:08] Extracting A/V streams [VID_00028]
- [14:20:14] Reencoding video [VID_00028]
- [14:20:14] Keeping original video (no reencode)
- [14:20:14] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:20:14] Multiplexing M2TS
- [14:20:19] Processing: VID_00029 (21 of 26)
- [14:20:19] Extracting A/V streams [VID_00029]
- [14:20:25] Reencoding video [VID_00029]
- [14:20:25] Keeping original video (no reencode)
- [14:20:25] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:20:25] Multiplexing M2TS
- [14:20:30] Processing: VID_00030 (22 of 26)
- [14:20:30] Extracting A/V streams [VID_00030]
- [14:20:38] Reencoding video [VID_00030]
- [14:20:38] Keeping original video (no reencode)
- [14:20:38] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:20:38] Multiplexing M2TS
- [14:20:43] Processing: VID_00031 (23 of 26)
- [14:20:43] Extracting A/V streams [VID_00031]
- [14:20:49] Reencoding video [VID_00031]
- [14:20:49] Keeping original video (no reencode)
- [14:20:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:20:49] Multiplexing M2TS
- [14:20:53] Processing: VID_00032 (24 of 26)
- [14:20:53] Extracting A/V streams [VID_00032]
- [14:20:57] Reencoding video [VID_00032]
- [14:20:57] Keeping original video (no reencode)
- [14:20:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4355 (eng): Keeping original audio
- [14:20:57] Multiplexing M2TS
- [14:21:00] Processing: VID_01002 (25 of 26)
- [14:21:00] Extracting A/V streams [VID_01002]
- [14:21:05] Reencoding video [VID_01002]
- [14:21:05] Keeping original video (no reencode)
- [14:21:05] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:21:05] Multiplexing M2TS
- [14:21:10] Processing: VID_01003 (26 of 26)
- [14:21:10] Extracting A/V streams [VID_01003]
- [14:21:14] Reencoding video [VID_01003]
- [14:21:15] Keeping original video (no reencode)
- [14:21:15] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:21:15] Multiplexing M2TS
[14:21:20]PHASE ONE complete
[14:21:20]PHASE TWO - Rebuild Started
- [14:21:20] Rebuilding BD file Structure
[14:21:32] - Encode and Rebuild complete
[14:21:32] JOB: BRAVEHEART_D1_AC finished.

Now the output directory is 37.2GB. The movie and extras are there..seems to play well. I've now set to only blank the 0.15MB segment.
BD-RB is processing...
Process finished. Final size is 2.51GB. Seems that blanking that segment (stream) breaks something...or bug with BD-RB?

[xterminater]

jdobbs, thanks for the newest version. I recently tried to back up a bluray but somehow the audio from the menu is tied to the trailer audio which I kept but I don't know why the audio is not there after I encoded. Unless it is tied to the second audio track which I have removed, but that couldn't have make sense because the trailer is the same as the menu's scene motion. The bluray is an asian bluray called The Four.

[Status]
LABEL=The Four
VERSION=v0.41.01 (beta)
SOURCE_SIZE=24700286445
SOURCE_VIDEO_SIZE=24688551936
TARGET_SIZE=8422162432
REDUCTION=.340661045848388
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=all
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=-1
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=3
REBUILD_COMPLETE=1
[00000]
AUDIO=11
PGS=11
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=31317880
RATE=5372
SPLITS=1
NSIZE=28631040
FLINK=-1
MLINK=-1
[00003]
AUDIO=10
PGS=11
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=8336575661
RATE=7807
SPLITS=1
NSTART=27000000
NEND=345805920
NSIZE=7652677632
FLINK=0
MLINK=0
[00004]
AUDIO=1
PGS=
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=42534382
RATE=3930
SPLITS=1
NSTART=27000000
NEND=30075840
NSIZE=40366080
FLINK=0
MLINK=0


[09/05/12] BD Rebuilder v0.41.01 (beta)
[00:35:07] Source: The Four
- Input BD size: 23.00 GB
- Approximate total content: [01:59:46.450]
- Target BD size: 7.84 GB
- Windows Version: 6.1 [7601]
- MOVIE and MENUS mode enabled
- Auto Quality: Good (Very Fast), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[00:35:08] PHASE ONE, Encoding
- [00:35:08] Processing: VID_00000 (1 of 5)
- [00:35:08] Extracting A/V streams [VID_00000]
- [00:35:15] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 24.000fps, 802 frames
- Bitrate: 5,372 Kbs
- [00:35:15] Reencoding: VID_00000, Pass 1 of 2
- [00:35:22] Reencoding: VID_00000, Pass 2 of 2
- [00:35:28] Video Encode complete
- [00:35:28] Processing audio tracks
- Track 4352 (zho): Keeping original audio
- Track 4353 (zho): Keeping original audio
- [00:35:28] Multiplexing M2TS
- [00:35:33] Processing: VID_00003 (2 of 5)
- [00:35:33] Extracting A/V streams [VID_00003]
- [00:50:41] Reencoding video [VID_00003]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 24.000fps, 170,030 frames
- Bitrate: 7,807 Kbs
- [00:50:41] Reencoding: VID_00003, Pass 1 of 2
- [01:18:55] Reencoding: VID_00003, Pass 2 of 2
- [01:46:58] Video Encode complete
- [01:46:58] Processing audio tracks
- Track 4352 (zho): Keeping original audio
- [01:46:58] Multiplexing M2TS
- [01:49:50] Processing: VID_00004 (3 of 5)
- [01:49:50] Extracting A/V streams [VID_00004]
- [01:49:58] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 24.000fps, 1,641 frames
- Bitrate: 3,930 Kbs
- [01:49:58] Reencoding: VID_00004, Pass 1 of 2
- [01:50:12] Reencoding: VID_00004, Pass 2 of 2
- [01:50:25] Video Encode complete
- [01:50:25] Processing audio tracks
- Track 4352 (zho): Keeping original audio
- [01:50:25] Multiplexing M2TS
- [01:50:29] Blanking: VID_00005 (4 of 5)
- [01:50:29] Blanking: VID_00009 (5 of 5)
[01:50:29]PHASE ONE complete
[01:50:29]PHASE TWO - Rebuild Started
- [01:50:29] Rebuilding BD file Structure
[01:50:30] - Encode and Rebuild complete
- WORKFILES folder removed.
[01:50:31] JOB: The Four finished.
- Extracting video streams [VID_00005]

[rippn]

What would cause this error:

- [10:58:23] Remuxing DTSX/IGS stream(s)
- [10:58:33] Processing: VID_50469 (36 of 47)
- [10:58:33] Extracting A/V streams [VID_50469]
- Error in attempt to extract audio/subs.
-
[11:02:54] - Failed to retrieve audio, aborted

It's happening on every source I try, however same settings different computer completes with no issue. Inspect shows everything is ok.

[jdobbs]

Is this an originally commercially created disc?

[xterminater]

jdobbs, was that question to me or rippn?

[dfsooner]

Any other suggestions? Manually editing the structure is not the most desirable solution.

I don't use that option (see below).

FYI. When I replaced the .m2ts, .clpi, and .mpls files with the originals, everything plays fine.


[Options]
VERSION=0.41.0.1
MODE=0
ENCODE_QUALITY=2
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=8032
PRIORITY_CLASS=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;fra;ger;spa;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=1
USE_LAVF=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
AUTO_BLANK=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
QUICK_EXTRAS=0
UNMASK_CHAPTER=1
COMPLETION_BEEP=1
DGDECNV=0
MIN_M2TS_SIZE=400
[Paths]
WORKING_PATH=D:\BD_REBUILDER WORKFILES\
SOURCE_PATH=F:\OU FOOTBALL\GAMES\2012\01 UTEP\

[Archer_Jonathan]

since 41.01 I get the following error message:
http://captain-archer.de/Temp/BDREBUILDER.jpg
Wassat? ;-)

It's alright, never mind......

disc was full.......

[AmigaFuture]

Braveheart Update:

Using the Movie and Menus (Auto-blank Extras) then selectively unchecking the extras I want produces my desired backup. It's the only mode that showed what I couldn't select to blank. Are you able to change that in the other modes? I checked with BD-25, encode High Speed. Now I'll use Highest, for quality.

Thank ~a lot~ for FORCE_NOENCODE=n!! I'm going to test more with that.

May I also suggest, when a SubProgram crashes that BD-RB _ makes _Sure_ that "tsmuxer.exe" is exited checking the process better? Even when the Info checker says all is good... I restarted a later than midnight process twice, that...come to find in other moemnts what the challenge was...I killed it, and got a good result when I was....more awake. :-D
What I noticed is that TsMuxer had locked a file in use even though BD-RB showed everything had quit. So the 2nd attempt, was futile because of that. I hadn't cleaned the trash, so the "locked" file (over a Gig) remained for 2 reset (sleepy) attempts...

Thanks.

[rippn]

jdobbs, was that question to me or rippn?

Don't think he was taking to me because my issue included multiple sources so wasn't source specific, but rather machine specific.

As for my issue, I found out what the issue was, turns out I was low on disk space. I thought BD Rebuilder would have a check for this but I guess it doesn't. Anyway, thanks jdobbs for this great piece of software!

[xterminater]

oh ok thanks rippn, yes my friend send me that from hong kong.

for reference... http://www.yesasia.com/global/the-four-2012-blu-ray-hong-kong-version/1031343283-0-0-0-en/info.html

[jdobbs]

jdobbs, was that question to me or rippn?rippn. I asked because the filename looked like it was something created with multiAVCHD.

[jdobbs]

Braveheart Update:

Using the Movie and Menus (Auto-blank Extras) then selectively unchecking the extras I want produces my desired backup. It's the only mode that showed what I couldn't select to blank. Are you able to change that in the other modes? I checked with BD-25, encode High Speed. Now I'll use Highest, for quality.

Thank ~a lot~ for FORCE_NOENCODE=n!! I'm going to test more with that.

May I also suggest, when a SubProgram crashes that BD-RB _ makes _Sure_ that "tsmuxer.exe" is exited checking the process better? Even when the Info checker says all is good... I restarted a later than midnight process twice, that...come to find in other moemnts what the challenge was...I killed it, and got a good result when I was....more awake. :-D
What I noticed is that TsMuxer had locked a file in use even though BD-RB showed everything had quit. So the 2nd attempt, was futile because of that. I hadn't cleaned the trash, so the "locked" file (over a Gig) remained for 2 reset (sleepy) attempts...

Thanks.When BD-RB runs a TSMUXER task, it waits for TSMUXER to close before it will continue (or exit). If it looks like TSMUXER is hung, BD-RB will tell the O/S to terminate it. The only exception to that would be if BD-RB completely crashed (not a BD-RB error screen -- just an O/S memory dump or BSOD).

[Archer_Jonathan]

now I have trouble, two BDs that won't work:

[20:51:44] PROCESSING BATCH FILE [4]
----------------------
[09.05.12] BD Rebuilder v0.41.01 (beta)
[20:51:53] Source: HIDE_AND_SEEK
- Input BD size: 34,20 GB
- Approximate total content: [02:33:11.914]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[20:51:54] PHASE ONE, Encoding
- [20:51:54] Processing: VID_00800 (1 of 26)
- [20:51:54] Extracting A/V streams [VID_00800]
- [21:23:19] Reencoding video [VID_00800]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 145.106 frames
- Bitrate: 23.195 Kbs
- [21:23:20] Reencoding: VID_00800, Pass 1 of 1
- [23:01:56] Video Encode complete
- [23:01:57] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4356 (deu): Keeping original audio
- [23:01:57] Multiplexing M2TS
==========================
[08:28:46] BD Rebuilder v0.41.01 (beta)
[08:28:46] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[08:28:46] PROCESSING BATCH FILE [4]
----------------------
[09.06.12] BD Rebuilder v0.41.01 (beta)
[08:28:55] Source: HIDE_AND_SEEK
- Input BD size: 34,20 GB
- Approximate total content: [02:33:11.914]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[08:29:00] PHASE ONE, Encoding
- [08:29:00] Processing: VID_00800 (1 of 26)
- [08:29:00] Multiplexing M2TS
- [08:29:00] DoEncoding() 00061 2004
[08:29:02] - Failed to complete.
[08:29:02] BATCH ABORTED...
==========================
[08:29:02] END - BATCH SEQUENCE
==========================
==========================
[08:29:05] BD Rebuilder v0.41.01 (beta)
[08:29:05] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[08:29:05] PROCESSING BATCH FILE [4]
----------------------
[09.06.12] BD Rebuilder v0.41.01 (beta)
[08:29:06] Source: HIDE_AND_SEEK
- Input BD size: 34,20 GB
- Approximate total content: [02:33:11.914]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[08:29:08] PHASE ONE, Encoding
- [08:29:08] Processing: VID_00800 (1 of 26)
- [08:29:08] Extracting A/V streams [VID_00800]
- [08:29:08] DoEncoding() 00061 1603
[08:47:02] - Failed to complete.
[08:47:02] BATCH ABORTED...
==========================
[08:47:02] END - BATCH SEQUENCE
==========================
==========================
[09:12:06] BD Rebuilder v0.41.01 (beta)
[09:12:06] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[09:12:06] PROCESSING BATCH FILE [4]
----------------------
[09.06.12] BD Rebuilder v0.41.01 (beta)
[09:12:15] Source: HIDE_AND_SEEK
- Input BD size: 34,20 GB
- Approximate total content: [02:33:11.914]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[09:12:15] PHASE ONE, Encoding
- [09:12:15] Processing: VID_00800 (1 of 26)
- [09:12:15] Extracting A/V streams [VID_00800]
- [09:42:55] Reencoding video [VID_00800]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 145.106 frames
- Bitrate: 23.195 Kbs
- [09:42:56] Reencoding: VID_00800, Pass 1 of 1
- [11:09:47] Video Encode complete
- [11:09:47] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4356 (deu): Keeping original audio
- [11:09:47] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00800.meta
- Can't create file G:\ZZ REBUILDERWORKS\WORKFILES\TMP\BDMV\STREAM\00000.m2ts
[11:09:56] - Failed to build structure, aborted
-----------------------
[11:09:57] PROCESSING BATCH FILE [5]
----------------------
[09.06.12] BD Rebuilder v0.41.01 (beta)
[11:10:06] Source: CONTRABAND_G51
- Input BD size: 36,57 GB
- Approximate total content: [02:38:08.770]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[11:10:07] PHASE ONE, Encoding
- [11:10:07] Processing: VID_00023 (1 of 30)
- [11:10:07] Extracting A/V streams [VID_00023]
- [11:45:24] Reencoding video [VID_00023]
- [11:45:24] Reencoding secondary video [TRK_02]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 157.725 frames
- Bitrate: 20.158 Kbs
- [11:53:06] Reencoding: VID_00023, Pass 1 of 1
- [13:32:23] Video Encode complete
- [13:32:23] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (deu): Keeping original audio
- [13:32:23] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00023.meta
- Can't create file G:\ZZ REBUILDERWORKS\WORKFILES\TMP\BDMV\STREAM\00000.m2ts
[13:32:31] - Failed to build structure, aborted
==========================
[13:32:32] END - BATCH SEQUENCE
==========================
==========================
[23:38:16] BD Rebuilder v0.41.01 (beta)
[23:38:17] BEGIN - BATCH SEQUENCE
==========================
==========================
[23:38:20] END - BATCH SEQUENCE
==========================
==========================
[23:40:42] BD Rebuilder v0.41.01 (beta)
[23:40:42] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[23:40:43] PROCESSING BATCH FILE [1]
----------------------
[09.06.12] BD Rebuilder v0.41.01 (beta)
[23:41:00] Source: HIDE_AND_SEEK
- Input BD size: 34,20 GB
- Approximate total content: [02:33:11.914]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[23:41:10] PHASE ONE, Encoding
- [23:41:11] Processing: VID_00800 (1 of 26)
- [23:41:11] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00800.meta
- Can't create file G:\ZZ REBUILDERWORKS\WORKFILES\TMP\BDMV\STREAM\00000.m2ts
[23:41:25] - Failed to build structure, aborted
-----------------------
[23:41:25] PROCESSING BATCH FILE [2]
----------------------
[09.06.12] BD Rebuilder v0.41.01 (beta)
[23:41:26] Source: CONTRABAND_G51
- Input BD size: 36,57 GB
- Approximate total content: [02:38:08.770]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[23:41:29] PHASE ONE, Encoding
- [23:41:29] Processing: VID_00023 (1 of 30)
- [23:41:29] Extracting A/V streams [VID_00023]
[23:43:27]PHASE ONE aborted by user request
[23:43:27] BATCH ABORTED...
==========================
[23:43:30] END - BATCH SEQUENCE
==========================
==========================
[23:44:46] BD Rebuilder v0.41.01 (beta)
[23:44:46] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[23:44:46] PROCESSING BATCH FILE [1]
----------------------
[09.06.12] BD Rebuilder v0.41.01 (beta)
[23:44:57] Source: HIDE_AND_SEEK
- Input BD size: 34,20 GB
- Approximate total content: [02:33:11.914]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[23:44:58] PHASE ONE, Encoding
- [23:44:58] Processing: VID_00800 (1 of 26)
- [23:44:58] Extracting A/V streams [VID_00800]
- [00:16:50] Reencoding video [VID_00800]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 145.106 frames
- Bitrate: 23.195 Kbs
- [00:16:50] Reencoding: VID_00800, Pass 1 of 1
- [01:40:24] Video Encode complete
- [01:40:24] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4356 (deu): Keeping original audio
- [01:40:24] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00800.meta
- Can't create file G:\ZZ REBUILDERWORKS\WORKFILES\TMP\BDMV\STREAM\00000.m2ts
[01:40:32] - Failed to build structure, aborted
-----------------------
[01:40:32] PROCESSING BATCH FILE [2]
----------------------
[09.07.12] BD Rebuilder v0.41.01 (beta)
[01:40:41] Source: CONTRABAND_G51
- Input BD size: 36,57 GB
- Approximate total content: [02:38:08.770]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[01:40:41] PHASE ONE, Encoding
- [01:40:41] Processing: VID_00023 (1 of 30)
- [01:40:41] Extracting A/V streams [VID_00023]
- [02:17:09] Reencoding video [VID_00023]
- [02:17:09] Reencoding secondary video [TRK_02]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 157.725 frames
- Bitrate: 20.158 Kbs
- [02:24:53] Reencoding: VID_00023, Pass 1 of 1
- [04:03:23] Video Encode complete
- [04:03:23] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (deu): Keeping original audio
- [04:03:23] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00023.meta
- Can't create file G:\ZZ REBUILDERWORKS\WORKFILES\TMP\BDMV\STREAM\00000.m2ts
[04:03:32] - Failed to build structure, aborted
==========================
[04:03:32] END - BATCH SEQUENCE
==========================
----------------------
[09.07.12] BD Rebuilder v0.41.01 (beta)
[06:54:15] Source: HIDE_AND_SEEK
- Input BD size: 34,20 GB
- Approximate total content: [02:33:11.914]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[06:54:16] PHASE ONE, Encoding
- [06:54:16] Processing: VID_00800 (1 of 26)
- [06:54:17] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00800.meta
- Can't create file G:\ZZ REBUILDERWORKS\WORKFILES\TMP\BDMV\STREAM\00000.m2ts
[06:54:24] - Failed to build structure, aborted

any idea what I can do?

[RobertM]

now I have trouble, two BDs that won't work:

any idea what I can do?

To start with the easy stuff... are you sure that you haven't filled up your HDD again? It happens quickly with BD work.

[jdobbs]

DoEncoding() 00061 2004 Error 00061 means your disc is full. any idea what I can do? Clear up your hard drive, or add on more disc space.To start with the easy stuff... are you sure that you haven't filled up your HDD again? It happens quickly with BD work. Yep. ;)

[omegaman7]

I'll be receiving that message soon enough, If I don't get to burning LOL! Nah, I watch my drives like a hawk! :p

[jdobbs]

I've updated the first post of this thread with links to a new release of BD Rebuilder (v0.42.01). Changes for this version:- Added an IMPORT function to the FILE menu. This
will allow you to import a movie from DVD, an MKV
sources, or an MP4 source. Handy for those who
want to make BD backups from their alternative
sources. I've found that using H.264's superior
encoding allows me to make perfect BD backups of
my DVD-9 sources to BD-5 or create MKV or MP4
material from a DVD source. It also allows me to
upconvert to 720p or 1080p using AVISYNTH rather
than the (sometimes) inferior upscaling of TVs or
standalone players. Note: MP4 & MKV importing will
require a source using H.264, MPEG, or VC-1.
- Added a new hidden setting, IMPORT_FOLDER, which
allows you to select a location where any interim
imported items are kept. The default location is
in the WORKING folder. Note: Items in the IMPORT
folder are meant to only be used as a source for
encoding via BD-RB since they may not necessarily
be fully compliant with BD standards at that point.
- Enhanced the audio selection process so that when
"Keep only one language" is enabled, BD-RB will
select the track having the better likely potential
quality (e.g. True-HD is selected over AC3).
- Corrected an issue in which very large timestamp
values could result in failure and the error
"CorrectMPLS() 00006 2403" during rebuild.
- Corrected an error in which resizing SD to 720p or
1080p in a full backup would not properly update
the MPLS.
- Corrected an issue in which 480p or 576p video
used as a primary might be mishandled. Note that
this configuration is illegal per BD standards but
is generally supported by players and can be found
occasionally in reauthored sources.
- Corrected an issue in which sources with pulldown
that were iVTC'd or those that were resized could
under certain circumstances result in subtitles
that were out of sync.
- Changed MKV output so no PGS subtitle is selected
by default at playback.
- Updated WAVI.EXE to a newer version. This should
fix possible exceptions when reencoding WAV files.
- Other minor corrections and cosmetic fixes.

[omegaman7]

You're incredible Jdobbs! I may just love the new import function ;)

[Ch3vr0n]

does this mean that with the import option i could simply import the VIDEO_TS folder and turn it into a blu-ray? Will the menu be kept or will it just pick the main movie & turn it into a BD? The output structure will be BD?

** edit ** Nvm the second question the menu option indicates movie only :) JFYI, don't see the proper command for the new hidden option IMPORT_FOLDER or wich variables are possible

[jdobbs]

You're incredible Jdobbs! I may just love the new import function ;)Thanks! I kinda' like that one myself. :)

[jdobbs]

does this mean that with the import option i could simply import the VIDEO_TS folder and turn it into a blu-ray? Will the menu be kept or will it just pick the main movie & turn it into a BD? The output structure will be BD? No menu... but I'm looking into that, not sure whether it is completely possible, though. I'm also looking at an option that can import multiple sources into a single disc and another that uses some simple authoring modes to create menus for the output.

[Ch3vr0n]

lol was modifying my post when you replied. take a look at the edit part (last part in specific)

[soneca]

You're incredible Jdobbs! I may just love the new import function ;)

+1
Thanks Jdobbs!:)

[jdobbs]

does this mean that with the import option i could simply import the VIDEO_TS folder and turn it into a blu-ray? Will the menu be kept or will it just pick the main movie & turn it into a BD? The output structure will be BD?

** edit ** Nvm the second question the menu option indicates movie only :) JFYI, don't see the proper command for the new hidden option IMPORT_FOLDER or wich variables are possible Example (in the config/ini file):

[Options]
IMPORT_FOLDER=C:\MYIMPORTS

You can get some speed increases by putting the import folder on a different drive than the working folder.

[Ch3vr0n]

If i read the changes.txt file correctly and your post that hidden command isnt tied to the new import function but is kind of a 2nd working folder?

Say i want to import a DVD movie that resides on my D:\ drive, BDRB is "installed on C:\ with the working folder C:\Temp. For best possible speed should i use D:\Temp or even better a 3rd (external) drive?

Just wanna make sure before i try this, cause if i read it correctly it will use the IMPORT_FOLDER as a read only source and the actual encoding happens in the working folder?

** edit ** just dit a test encode. Audio totally out of sync & subs didn't show up at all. Looks like i'll need to play arround a little ^^

[thegame]

Thanks a lot jdobbs for this great update, now we just need PAL to NTSC conversion lol, but I was wondering is anyone having a problem getting BD-RB set to use DGIndexNV? I had it going on the last version and now I keep getting a run time error.

Thanks

Edit, this is what I get and then it closes everything.

Run-Time error '5':

Invalid procedure call or argument

but like I said, the last version was working and using it.

[jdobbs]

If i read the changes.txt file correctly and your post that hidden command isnt tied to the new import function but is kind of a 2nd working folder?

Say i want to import a DVD movie that resides on my D:\ drive, BDRB is "installed on C:\ with the working folder C:\Temp. For best possible speed should i use D:\Temp or even better a 3rd (external) drive?

Just wanna make sure before i try this, cause if i read it correctly it will use the IMPORT_FOLDER as a read only source and the actual encoding happens in the working folder?

** edit ** just dit a test encode. Audio totally out of sync & subs didn't show up at all. Looks like i'll need to play arround a little ^^ No, it isn't a second working folder. It is tied directly to the IMPORT function and is used specifically for it. It is better for the IMPORT folder to be on a different disc than your WORKING folder. But it isn't necessary. By default (no IMPORT_FOLDER specified) the IMPORT folder is called "IMPORTS" and will be created in the working folder on demand.

When the DVD is converted to BD format it's stored in the IMPORT folder. Then when you run BD-RB against it, the source is the folder under IMPORT. Importing usually takes only a few minutes (on my system it is usually 5 minutes, but it can depend on how many subtitles have to be converted).

I've done somewhere in the neighborhood of 30 or so DVDs in testing, and I haven't had any issues with audio sync or subtitles yet. But it is new, so there's always a chance there's something that needs tweaking. I added the necessary code to handle PAL sources -- but I haven't done any PAL testing.

[jdobbs]

Thanks a lot jdobbs for this great update, now we just need PAL to NTSC conversion lol, but I was wondering is anyone having a problem getting BD-RB set to use DGIndexNV? I had it going on the last version and now I keep getting a run time error.

Thanks

Edit, this is what I get and then it closes everything.

Run-Time error '5':

Invalid procedure call or argument

but like I said, the last version was working and using it. I use DGDecNV it all the time. In fact I have it executing (doing a job) right now on my other computer. Error 5 indicates an invalid procedure call or argument. I'd need more information as to how & when you are getting it to identify what's causing it.

[AmigaFuture]

When BD-RB runs a TSMUXER task, it waits for TSMUXER to close before it will continue (or exit). If it looks like TSMUXER is hung, BD-RB will tell the O/S to terminate it. The only exception to that would be if BD-RB completely crashed (not a BD-RB error screen -- just an O/S memory dump or BSOD).

TSMUXER task was still active and BD-RB's GUI was still there, only the info about everything being "Ok" was the last bit of the log. I should have displayed the log, ah...well. TSMUXER hasn't crashed in a while with my machine. I was able to kill the Nonfunctional TSMUXER and have BD-RB, without exiting, resume...once I could delete the locked large file.

If it happens again, I'll share the log and more. :thanks:

[NightHawkGuy]

On the new version of BD Rebuilder I also get the error message popup "Run-time error '5': Invalid procedure call or argument" when I check the box under the setup settings for "Use DGDecNV for decoding/frame serving" and attempt to point to the DGIndexNV.exe file.
After that the error message popups and then the program will shut down.
This worked fine in the previous version, no change to the DGDecNV version I'm using (its the latest/current version)

This problem is just happening during the initial setup attempting to enable the DGDecNV support.
I can bypass the problem by manually copying the settings from my previous BDREBUILDER.INI file, to set DGDECNV=1 and the paths to DGIndexNV and DGDecNV.
Then I can startup BDRebuilder normally and run an encode session using DGDecNV (now that its enabled) fine.

[dfsooner]

Went back to 41.01.

Never could get 42.01 to run because of the Run-Time error '5' problem.

[omegaman7]

Just did a quick test with DGDecNV(46sec clip). It worked perfectly. Might I recommend, making absolutely certain that your directories are precise within the Bd Rebuilder ini file ;) If even one character is wrong, it would cause a problem.

Jdobbs, do you think in the future releases, you could have a single folder in the archive? I extracted to my download folder, and had 10 files/folders to track down among a few hundred LOL! Not a huge deal, but it would be cool. I guess I should really check what I'm extracting before initiating though, eh? LOL!

[Capsbackup]

The import function is a nice new feature! :)
I have been capturing HD cable broadcasts from HBO, Showtime, etc... with a Hauppauge HD PVR 1212, which records 1080i, 5.1ac3 to .h264, in either a .ts or .m2ts container. Unfortunately, BD-RB does not allow import of these file types (Yet?!). :(
Since I have been recording tv series episodes at the highest bitrate the Hauppauge allows, 15mbps, I then need to reencode them to fit the season on BD-R (once I know the total time of all episodes.) So control of the actual bitrate is important for this, so I can use multiAVCHD to combine a season of episodes into a Blu-ray.
Any chance of implementation? :D

[thegame]

I use DGDecNV it all the time. In fact I have it executing (doing a job) right now on my other computer. Error 5 indicates an invalid procedure call or argument. I'd need more information as to how & when you are getting it to identify what's causing it.

I get it right when I installed the new version of your program and when I direct it to the exe I get that error and it closes the entire program, I have tried several times, I even tried to use the exe from a previous version of DGDecNV and same thing happens, should I go back to the previous version of BD-RB and try it again?

Thanks

*edit, we are at DGIndexNV v2.0.4.2 correct?

[omegaman7]

I'm still using 2041 :S

[AmigaFuture]

Jdobbs, do you think in the future releases, you could have a single folder in the archive? I extracted to my download folder, and had 10 files/folders to track down among a few hundred LOL! Not a huge deal, but it would be cool. I guess I should really check what I'm extracting before initiating though, eh? LOL!

Hahaha! Before it did extract to a single directory allowing overwriting the older files in a directory of the same name (Using WinRAR). I had a feeling NOT to do that for the new archive. I'm glad I noticed that feeling. :)

[jdobbs]

The import function is a nice new feature! :)
I have been capturing HD cable broadcasts from HBO, Showtime, etc... with a Hauppauge HD PVR 1212, which records 1080i, 5.1ac3 to .h264, in either a .ts or .m2ts container. Unfortunately, BD-RB does not allow import of these file types (Yet?!). :(
Since I have been recording tv series episodes at the highest bitrate the Hauppauge allows, 15mbps, I then need to reencode them to fit the season on BD-R (once I know the total time of all episodes.) So control of the actual bitrate is important for this, so I can use multiAVCHD to combine a season of episodes into a Blu-ray.
Any chance of implementation? :D I should be able to handle those easy enough.

[jdobbs]

I'm still using 2041 :SI am also... I guess I need to download the update and see that it works correctly. I haven't been checking.

[jdobbs]

Hahaha! Before it did extract to a single directory allowing overwriting the older files in a directory of the same name (Using WinRAR). I had a feeling NOT to do that for the new archive. I'm glad I noticed that feeling. :) Ughh... I screwed that up... don't know what I was thinking. I'll rezip it and post it again.

[jdobbs]

On the new version of BD Rebuilder I also get the error message popup "Run-time error '5': Invalid procedure call or argument" when I check the box under the setup settings for "Use DGDecNV for decoding/frame serving" and attempt to point to the DGIndexNV.exe file.
After that the error message popups and then the program will shut down.
This worked fine in the previous version, no change to the DGDecNV version I'm using (its the latest/current version)

This problem is just happening during the initial setup attempting to enable the DGDecNV support.
I can bypass the problem by manually copying the settings from my previous BDREBUILDER.INI file, to set DGDECNV=1 and the paths to DGIndexNV and DGDecNV.
Then I can startup BDRebuilder normally and run an encode session using DGDecNV (now that its enabled) fine. What version of DGDecNV are you using? Did that version work with the previous version of BD-RB? It looks like more than one person is getting that message... I'd like to find it and fix it. Was the new EXE installed in a different location than before or anything like that? Is the path listed in your config/INI correct?

[NightHawkGuy]

What version of DGDecNV are you using? Did that version work with the previous version of BD-RB? It looks like more than one person is getting that message... I'd like to find it and fix it. Was the new EXE installed in a different location than before or anything like that? Is the path listed in your config/INI correct?

I am using the same DGDecNV version (the latest one, 2042) and it worked fine with the previous BD-RB.
Its installed in the same directory as before.
Its just the initial settings setup checking the DGDecNV option the first time, after BD-RB requests to point to the .exe file where the error popup occurs.
The paths in the bdrebuilder.ini file don't get set at that time, due to the error occurring and BD-RB aborting.

If I manually edit the bdrebuilder.ini file to add the correct path to the dgdecnv files it can use it fine for encoding after that.
So this error 5 problem is apparently caused by something in the new bd-rb version just in that first time setup code for selecting dgdecnv usage that sets the paths to the dgdecnv files in the ini file.

For reference I am running Windows 7x64 OS with an AMD 6core CPU.

[jdobbs]

I am using the same DGDecNV version (the latest one, 2042) and it worked fine with the previous BD-RB.
Its installed in the same directory as before.
Its just the initial setup where BD-RB requests to point to the .exe file where the error popup occurs.
The paths in the bdrebuilder.ini file don't get set at that time, due to the error occurring and BD-RB aborting.

If I manually edit the bdrebuilder.ini file to add the correct path to the dgdecnv files it can use it fine for encoding after that.
So this error 5 problem is apparently caused by something in the new bd-rb version just in that first time setup code for selecting dgdecnv usage that sets the paths to the dgdecnv files in the ini file.

For reference I am running Windows 7x64 OS with an AMD 6core CPU. Weird. I just went into my INI and purposely put incorrect/goofy values and I haven't been able to repeat the error.

When does it stop? Does it get to the point where you are starting to browse for the file? Is it at start-up, or when you click on it in the SETUP dialog?

This is really confusing, because nothing changed in that code???

[jdobbs]

I am using the same DGDecNV version (the latest one, 2042) and it worked fine with the previous BD-RB.
Its installed in the same directory as before.
Its just the initial settings setup checking the DGDecNV option the first time, after BD-RB requests to point to the .exe file where the error popup occurs.
The paths in the bdrebuilder.ini file don't get set at that time, due to the error occurring and BD-RB aborting.

If I manually edit the bdrebuilder.ini file to add the correct path to the dgdecnv files it can use it fine for encoding after that.
So this error 5 problem is apparently caused by something in the new bd-rb version just in that first time setup code for selecting dgdecnv usage that sets the paths to the dgdecnv files in the ini file.

For reference I am running Windows 7x64 OS with an AMD 6core CPU. Ok. I found it. It was in a subroutine that was called from the SETUP dialog. I'll put a fix in for that and post an quick release. First I need to check and make sure it isn't referenced anywhere else that might crash.

[Edit] In case anyone else runs into it -- it also affects loading and saving projects. I should have a new version up later today. As for the ZIP file... I've updated it on my site so it now only has one folder when you unzip.

[omegaman7]

With each update to rebuilder, I've been copying the config/ini file, and updating the DGDecNV directories manually. Guess I've just found it easier this way. I like to keep all the settings the same :p

[thegame]

Thanks jdobbs for the fix, looking forward to the new version.

[jdobbs]

Thanks jdobbs for the fix, looking forward to the new version. I found a couple places that were also affected -- like saving and opening projects... I'm surprised that didn't show in my testing. I must be getting old.

[omegaman7]

I found a couple places that were also affected -- like saving and opening projects... I'm surprised that didn't show in my testing. I must be getting old.

I feel that way some times. I'm only 32 :S

[jdobbs]

I've updated the first post of this thread with a link to a new release of BD Rebuilder (v0.42.02). Changes for this version:- Corrected an issue in which attempting to select
DGDecNV paths or opening/saving project files
could result in "Run-Time error '5'", invalid
procedure call.
- Corrected an error in which attempting to import
some files with short pathnames might result in
an error.
- Added the ability to import .M2TS and .TS files
to the video file import menu selection.
- Other minor corrections and cosmetic fixes.

[ihmcjacky]

----------------------
[09/09/12] BD Rebuilder v0.42.02 (beta)
[12:28:31] Source: M-I-1-1996_PLAYLIST_00001
- Input BD size: 31.25 GB
- Approximate total content: [01:50:12.605]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[12:28:31] PHASE ONE, Encoding
- [12:28:31] Processing: VID_00125 (1 of 1)
- [12:28:31] Extracting A/V streams [VID_00125]
- Error in attempt to extract audio/subs.
-
[12:29:36] - Failed to retrieve audio, aborted


Mission Impossible 1 Cannot backup problem, retrieve audio failed, any ideas?

[jdobbs]

----------------------
[09/09/12] BD Rebuilder v0.42.02 (beta)
[12:28:31] Source: M-I-1-1996_PLAYLIST_00001
- Input BD size: 31.25 GB
- Approximate total content: [01:50:12.605]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[12:28:31] PHASE ONE, Encoding
- [12:28:31] Processing: VID_00125 (1 of 1)
- [12:28:31] Extracting A/V streams [VID_00125]
- Error in attempt to extract audio/subs.
-
[12:29:36] - Failed to retrieve audio, aborted


Mission Impossible 1 Cannot backup problem, retrieve audio failed, any ideas? Not sure. It failed trying to extract the audio/video/subtitle streams. Can you post the contents of AUD_00125.META?

You're not short of drive space, are you?

[jdobbs]

I got a report earlier of an imported DVD that was having audio sync problems. Since I haven't tested any PAL discs, and I haven't seen any sync issues, could someone report if they have successfully imported a PAL DVD?

Thanks.

[hifreak]

I got a report earlier of an imported DVD that was having audio sync problems. Since I haven't tested any PAL discs, and I haven't seen any sync issues, could someone report if they have successfully imported a PAL DVD?

Thanks.

I tried to import a PAL DVD no problem with the sync, but my source is 16:9, but my final build was 4:3 I Do i need to change something in my settings:

MODE=2
ENCODE_QUALITY=2
AUTO_QUALITY=0
TARGET_SIZE=4469
VERSION=0.42.0.2
AUTO_BURN=0
ONEPASS_ENCODING=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1

[jdobbs]

I tried to import a PAL DVD no problem with the sync, but my source is 16:9, but my final build was 4:3 I Do i need to change something in my settings:

MODE=2
ENCODE_QUALITY=2
AUTO_QUALITY=0
TARGET_SIZE=4469
VERSION=0.42.0.2
AUTO_BURN=0
ONEPASS_ENCODING=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1


I'll have to check on that. You reminded me that there are some DVD sources that are actually encoded at 4:3, but since the IFO takes precedence they are played back at 16:9. It's not common, but I've seen them. I need to make sure I use the aspect specified in the IFO.

[Edit] I just went back and checked and I am getting the aspect ratio from the IFO. Is this an original unmodified DVD?

[Edit again] Hmm... I took a closer look and it appears I may have made a mistake in the way I pulled the rate from the IFO for PAL DVDs, still checking... now I'm wondering how your PAL disc was in-sync?

[Edit another time] I followed the code, and although the ratio is pulled correctly from the IFO, when it is remuxed into BD format by TSMUXER, the ratio used is the one in the extracted MPEG-2 stream. I'll need to somehow change that. I can always scan the MPEG-2 stream and replace the flags, I guess... but I'd rather avoid that.

[hifreak]

I'll have to check on that. You reminded me that there are some DVD sources that are actually encoded at 4:3, but since the IFO takes precedence they are played back at 16:9. It's not common, but I've seen them. I need to make sure I use the aspect specified in the IFO.

[Edit] I just went back and checked and I am getting the aspect ratio from the IFO. Is this an original unmodified DVD?

[Edit again] Hmm... I took a closer look and it appears I may have made a mistake in the way I pulled the rate from the IFO for PAL DVDs, still checking... now I'm wondering how your PAL disc was in-sync?

[Edit another time] I followed the code, and although the ratio is pulled correctly from the IFO, when it is remuxed into BD format by TSMUXER, the ratio used is the one in the extracted MPEG-2 stream. I'll need to somehow change that. I can always scan the MPEG-2 stream and replace the flags, I guess... but I'd rather avoid that.

Thanks for the feedback I try check again if the DVD is in sync, maybe some others here can try a PAL DVD too and see what they experience. The DVD is not modified it is a DVD9 original one.

[Capsbackup]

Just tried opening a h.264 ts file with BD Rebuilder v0.42.02 (beta) but I get:

----------------------
[07:48:56] Importing TS: WEEDS_S8_E1_1080I
- Collecting audio/video streams from source...
- Building pseudo-BD source structure...
[07:49:39]ERROR: Failed to build BD structure. Aborted.

Pop-up says:
Demuxing Error
Error: Failed to build BD structure. Aborting.

If I use tsMuxeR GUI on the same file it demuxes fine. :confused:

[hifreak]

Thanks for the feedback I try check again if the DVD is in sync, maybe some others here can try a PAL DVD too and see what they experience. The DVD is not modified it is a DVD9 original one.

I can confirm that the DVD is in sync, so thats not the problem. The problem is the aspect ratio.

[jdobbs]

I can confirm that the DVD is in sync, so thats not the problem. The problem is the aspect ratio. Are you positive it is PAL and not NTSC? I just don't see how a PAL file could work correctly...

[jdobbs]

Just tried opening a h.264 ts file with BD Rebuilder v0.42.02 (beta) but I get:



Pop-up says:
Demuxing Error
Error: Failed to build BD structure. Aborting.

If I use tsMuxeR GUI on the same file it demuxes fine. :confused: I'll create some TS files and give it a test. I ran my tests using M2TS files.

[Edit] Ok found it. It was truncating a character off the end of the filename in the META file. Just a little more testing and I'll post a fix.

[soneca]

Hi jdobbs,

I can not import some DVDs (NTSC) and a piece of file(M2TS) also had problems.

Failed
[12:24:22] Importing DVD: A_FAMILIA_DO_FUTURO
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[12:25:58]ERROR: Remuxing to BD failed. Aborted.
----------------------
Failed
[12:27:16] Importing DVD: MONSTROS_VS_ALIENIGENAS
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[12:29:00]ERROR: Remuxing to BD failed. Aborted.
----------------------
Ok
[12:32:44] Importing DVD: YANNI_LIVE_AT_EL_MORRO
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[12:35:52] DVD import completed successfully.

M2TS

stop here, do not abort

[13:38:31] Importing M2TS: TESTE
- Collecting audio/video streams from source...
- Building pseudo-BD source structure...

http://i131.photobucket.com/albums/p305/soneca1/Forum/teste.jpg

[hifreak]

Are you positive it is PAL and not NTSC? I just don't see how a PAL file could work correctly...

Don´t know so much about why it work like this, but I know and can confirm it is a PAL DVD ;)

[jdobbs]

Hi jdobbs,

I can not import some DVDs (NTSC) and a piece of file(M2TS) also had problems.

Failed
[12:24:22] Importing DVD: A_FAMILIA_DO_FUTURO
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[12:25:58]ERROR: Remuxing to BD failed. Aborted.
----------------------
Failed
[12:27:16] Importing DVD: MONSTROS_VS_ALIENIGENAS
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[12:29:00]ERROR: Remuxing to BD failed. Aborted.
----------------------
Ok
[12:32:44] Importing DVD: YANNI_LIVE_AT_EL_MORRO
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[12:35:52] DVD import completed successfully.

M2TS

stop here, do not abort

[13:38:31] Importing M2TS: TESTE
- Collecting audio/video streams from source...
- Building pseudo-BD source structure...

http://i131.photobucket.com/albums/p305/soneca1/Forum/teste.jpg Can you give me some details about the DVDs that won't import? There are some that aren't BD compliant like MPEG-1 and Half-D1 for example. Frankly, those are few and far between (I've never seen a commercial disc with either).

Try a complete M2TS file... I'm not sure what a "piece" entails...

Also, please identify the audio type of the original. I haven't tested LPCM (I couldn't find one). Opening it with DVD Rebuilder can give you the details.

[AmigaFuture]

Ughh... I screwed that up... don't know what I was thinking. I'll rezip it and post it again.

Ah, no worries. Worry is the most useless thing..except if you want to experience illness, haha. Sometimes we have to notice we're not very focused and get ourselves back into focus. :)

[Nav1]

Hi jdobbs,

BD Rebuilder v0.42.02 (beta)

Just import Dvd (Back to the Future) Got Run-time error '9':

Subscript out of range

[jdobbs]

Hi jdobbs,

BD Rebuilder v0.42.02 (beta)

Just import Dvd (Back to the Future) Got Run-time error '9':

Subscript out of rangeDo you have a log? At what point did it happen?

[soneca]

Can you give me some details about the DVDs that won't import? There are some that aren't BD compliant like MPEG-1 and Half-D1 for example. Frankly, those are few and far between (I've never seen a commercial disc with either).

Try a complete M2TS file... I'm not sure what a "piece" entails...

Also, please identify the audio type of the original. I haven't tested LPCM (I couldn't find one). Opening it with DVD Rebuilder can give you the details.

Are commercial discs, with standard features and both with DD 5.1 audio.

Information from one of the disks.

General
Complete name : D:\DVD\A_FAMILIA_DO_FUTURO\VIDEO_TS\VTS_01_0.IFO
Format : DVD Video
Format profile : Program
File size : 66.0 KiB
Duration : 1h 34mn
Overall bit rate mode : Variable
Overall bit rate : 95 bps

Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 2
Duration : 1h 34mn
Bit rate mode : Variable
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Compression mode : Lossy

Audio
ID : 130 (0x82)
Format : AC-3
Format/Info : Audio Coding 3
Duration : 1h 34mn
Channel(s) : 6 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Language : Portuguese

Menu
Duration : 1h 34mn
00:00:00.000 : Chapter 1
00:08:34.964 : Chapter 2
00:10:19.960 : Chapter 3
00:19:41.124 : Chapter 4
00:22:31.624 : Chapter 5
00:23:56.790 : Chapter 6
00:26:21.323 : Chapter 7
00:32:34.186 : Chapter 8
00:42:16.450 : Chapter 9
00:44:56.783 : Chapter 10
00:48:07.515 : Chapter 11
00:49:32.015 : Chapter 12
00:52:19.715 : Chapter 13
00:57:09.480 : Chapter 14
01:02:09.611 : Chapter 15
01:07:02.277 : Chapter 16
01:13:47.641 : Chapter 17
01:20:58.539 : Chapter 18
01:29:04.470 : Chapter 19
01:34:40.268 : Chapter 20
01:41:20.601 : Chapter 21
List (Audio) : 2

I just rip a disc(movie only/AnyDVD/CloneDVD2) well known commercial, A Bug's Life.
Was correctly processed via DVD Rebuilder but the same error occurred in BD Rebuilder.

[17:18:14] One Click encoding activated...
-----------------
[17:18:14] Phase I, PREPARATION started.
- DVD-RB v1.28.2
- AVISYNTH 2.5.8.0
- HC v0.25.0.0 encoder selected
- Source: BUGS_BRAZIL
- VTS_01: 2.672.445 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 136.525 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 83,2%
- Overall Bitrate : 7.553/6.043Kbs
- Space for Video : 4.200.322KB
- Analyzing VTS_01 for optimal CQ factor.
-- TargetSize (sectors):2.131.664
-- Sampling 1368 of 136525 frames.
-- Predicted size (sectors) at CQ=2,7: 1.823.391
-- Predicted size (sectors) at CQ=2,3: 2.196.946
-- Predicted size (sectors) at CQ=2,4: 2.087.256
- CQ Value selected: 2,4
- Redistributing Final_CQ: 2,4
- HIGH/LOW/TYPICAL Bitrates: 7.585/1.162/6.043 Kbs
[17:21:23] Phase I, PREPARATION completed in 3 minutes.
[17:21:23] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Extracting Video for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Extracting Video for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Extracting STILLS for VTS_01 segment 48
[17:30:49] Phase II ENCODING completed in 9 minutes.
[17:30:49] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 3 VOBID 4 CELLID 1
- Rebuilding seg 4 VOBID 4 CELLID 2
- Rebuilding seg 5 VOBID 4 CELLID 3
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 6 VOBID 5 CELLID 1
- Rebuilding seg 7 VOBID 5 CELLID 2
- Rebuilding seg 8 VOBID 5 CELLID 3
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 9 VOBID 6 CELLID 1
- Rebuilding seg 10 VOBID 6 CELLID 2
- Rebuilding seg 11 VOBID 6 CELLID 3
- Rebuilding seg 12 VOBID 6 CELLID 4
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 13 VOBID 7 CELLID 1
- Rebuilding seg 14 VOBID 7 CELLID 2
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 15 VOBID 8 CELLID 1
- Rebuilding seg 16 VOBID 8 CELLID 2
- Rebuilding seg 17 VOBID 8 CELLID 3
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 18 VOBID 9 CELLID 1
- Rebuilding seg 19 VOBID 9 CELLID 2
- Rebuilding seg 20 VOBID 9 CELLID 3
- Rebuilding seg 21 VOBID 9 CELLID 4
- Rebuilding seg 22 VOBID 9 CELLID 5
- Rebuilding seg 23 VOBID 9 CELLID 6
- Updating NAVPACKS for VOBID_09
- Rebuilding seg 24 VOBID 10 CELLID 1
- Rebuilding seg 25 VOBID 10 CELLID 2
- Rebuilding seg 26 VOBID 10 CELLID 3
- Updating NAVPACKS for VOBID_10
- Rebuilding seg 27 VOBID 11 CELLID 1
- Rebuilding seg 28 VOBID 11 CELLID 2
- Rebuilding seg 29 VOBID 11 CELLID 3
- Updating NAVPACKS for VOBID_11
- Rebuilding seg 30 VOBID 12 CELLID 1
- Rebuilding seg 31 VOBID 12 CELLID 2
- Rebuilding seg 32 VOBID 12 CELLID 3
- Rebuilding seg 33 VOBID 12 CELLID 4
- Rebuilding seg 34 VOBID 12 CELLID 5
- Rebuilding seg 35 VOBID 12 CELLID 6
- Updating NAVPACKS for VOBID_12
- Rebuilding seg 36 VOBID 13 CELLID 1
- Rebuilding seg 37 VOBID 13 CELLID 2
- Rebuilding seg 38 VOBID 13 CELLID 3
- Updating NAVPACKS for VOBID_13
- Rebuilding seg 39 VOBID 14 CELLID 1
- Rebuilding seg 40 VOBID 14 CELLID 2
- Rebuilding seg 41 VOBID 14 CELLID 3
- Rebuilding seg 42 VOBID 14 CELLID 4
- Rebuilding seg 43 VOBID 14 CELLID 5
- Updating NAVPACKS for VOBID_14
- Rebuilding seg 44 VOBID 15 CELLID 1
- Rebuilding seg 45 VOBID 15 CELLID 2
- Updating NAVPACKS for VOBID_15
- Rebuilding seg 46 VOBID 16 CELLID 1
- Updating NAVPACKS for VOBID_16
- Rebuilding seg 47 VOBID 17 CELLID 1
- Updating NAVPACKS for VOBID_17
- Rebuilding seg 48 VOBID 18 CELLID 1
- Updating NAVPACKS for VOBID_18
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[17:35:33] Phase III, REBUILD completed in 5 minutes.

Done.
[17:35:33] PREPARE/ENCODE/REBUILD completed in 17 min.

________________________________________________________

[16:05:04] Importing DVD: BUGS_BRAZIL
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[16:07:27]ERROR: Remuxing to BD failed. Aborted.

I'll try later with a full M2TS file with the same characteristics.

[jdobbs]

All I can say is that I'm at about 40-45 DVD discs so far, all NTSC like yours, and none have failed yet. I have no idea what's going on with yours.

As for the M2TS, hang on for the next release. I found a couple things that I've fixed.

[soneca]

Thanks!

Let's wait and see if this problem is happening with other users as well.:confused:

[AmigaFuture]

May I make a recommendation? Put the FORCE_NOENCODE into the Encoding Menu settings? It would be nice to switch to it, like the other; slower, faster..after selections are already made without losing the selected Blanking(s) from editing the config via the GUI.

Also, I tried the import one of my DVDs of The Mentalist, and I can see "Jerking". I didn't set for reencoding. If I play the actual DVD, no jerking. I'll try with a "Movie" soon. Meanwhile, I love to added feature for other backups...including TiVo files.

[jdobbs]

May I make a recommendation? Put the FORCE_NOENCODE into the Encoding Menu settings? It would be nice to switch to it, like the other; slower, faster..after selections are already made without losing the selected Blanking(s) from editing the config via the GUI.

Also, I tried the import one of my DVDs of The Mentalist, and I can see "Jerking". I didn't set for reencoding. If I play the actual DVD, no jerking. I'll try with a "Movie" soon. Meanwhile, I love to added feature for other backups...including TiVo files. Almost all discs have pulldown applied -- many blu-rays players have problems with pulldown in BD format (even if you keep the original MPEG-2 source). I'd suggest you make sure you have IVTC enabled (to remove the pulldown) and resize to 720 or 1080 -- that way pulldown doesn't have to be reapplied (because 23.976fps is legal for those resolutions).

I've purposely put FORCE_NOENCODE in the hidden options because it is so rarely used. People forget, and then I get dozens of bug reports related to oversizing. I want to keep "special feature" types of options (than can cause reencoding/resizing/non-compliance issues) off the radar except for people who really understand the implications.

[steveg32]

v0.41.01, "Men In Black (#1)", Full Backup was no problem to BD-25, but unable to backup as Movie-Only Backup>Alternate Movie-Only Output (DVD-5). Tried both available Playlists (016 Chapters). This is the 1st & only time this has ever happened.

@jdobbs, can you duplicate? Sorry but I deleted all ini files, etc.

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.41.0.1, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

Mahalo brah :)

I'll see what I can find...

@jdobbs

Fyi, I did same for Men In Black II. No problems. Funny how it only happens with MIB I :confused:

Aloha

[xterminater]

jdobbs, I try to search for answer to this question but I couldn't find any so if I ask, please don't go crazy! :) If a bluray disc has both 2D & 3D version, will BD-RB be able to back up the 2D portion only?

[Ch3vr0n]

jdobbs, I try to search for answer to this question but I couldn't find any so if I ask, please don't go crazy! :) If a bluray disc has both 2D & 3D version, will BD-RB be able to back up the 2D portion only?

It can, bdrb ignores the SSIF folder. The menu will still list the 3d entry but it won't start the movie / work. The only time i tried that selecting the 3d option stopped disc playback, selecting the 2d option worked as it should.



Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[Sharc]

Almost all discs have pulldown applied -- many blu-rays players have problems with pulldown in BD format (even if you keep the original MPEG-2 source). I'd suggest you make sure you have IVTC enabled (to remove the pulldown) and resize to 720 or 1080 -- that way pulldown doesn't have to be reapplied (because 23.976fps is legal for those resolutions).

As far as I remember from earlier experience, tsmuxer does not support any --pulldown options. I think this is still the case as tsmuxer has not seen any further development since.

[jdobbs]

As far as I remember from earlier experience, tsmuxer does not support any --pulldown options. I think this is still the case as tsmuxer has not seen any further development since. The pulldown is added in X264. TSMUXER accepts the source with pulldown, shows it as such in its window, and recognizes it as 29.97fps. If there are issues with it's handling pulldown I'm not aware of it. But I can say my Samsung player doesn't play it very well. I generally just use 23.976 via SD_PROGRESSIVE on 720x480 sources if I'm keeping them at SD. Even though it is against the BD standard (so I can't outright recommend it), I've never seen a player that wouldn't accept it.

I should correct myself, though. I said "Almost all discs have pulldown applied..." -- I should have said "Almost all NTSC discs have pulldown applied...

TSMUXER does have an option to remove pulldown.

[Sharc]

The pulldown is added in X264. TSMUXER accepts the source with pulldown, shows it as such in its window, and recognizes it as 29.97fps. If there are issues with it's handling pulldown I'm not aware of it. But I can say my Samsung player doesn't play it very well.

Yes, it's added in x264 but you may remember that we had some discussion on --pulldown and jerky playback based on various experiments and settings, and at the end the conclusion (suspicion) was that there seem to be issues with tsmuxer (+/- confirmed by others as well) not handling pulldown correctly. I have no proof however, but see also the note here (http://www.x264bluray.com/issues-with-certain-players).
Player or tsmuxer -- it seems advisable to avoid --pulldown if possible.

[pasadena]

I am storing all my movies into ISO rips using a custom 9GB setting, movie-only mode, high-speed option and both encoding un-ticked to enable 2-pass encoding. This results in crunching the movie down in a few hours. I will be storing an HD audio stream wherever possible within the 9GB iso and leaving the rest for video.

Has anyone used this option and compared the results without the high-speed option and highest (very slow) encoding selecting instead? If so, are there big difference in the resulting output or is it only marginal, if at all?

I'm trying the second option and see how long that takes and what the outcome is and will compare it to the original. I just did a run using the first option using kick-ass as the movie input and the output seems excellent. Though, I'd have to wait for this second one to finish to compare the results.

As I have a BDP-93, I'd want the ISO rips to be large enough so I would prefer the better outcome video quality wise, even if it takes many hours longer. My initial intention will not to burn these to bdr-25gb blanks as I want to store my rips into a reasonable size so that I can fit as many onto a 2TB disk without compromising video quality and thought 9GB was a good place to start. I do have an LTO Ultrium 4 backup drive and will instead backups my rips to tapes.

Your input appreciated.

Cheers

[lauguru]

a question, HIDDENOPTS.txt file does not appear, or rather, only appears ...
AUTO_BIAS = n n = 0-3
n=4 would use the writing process:work?

AUTO_BIAS=4
ENCODE_QUALITY=4 Quality: Ultra High Quality (Extremely Slow)

[jdobbs]

a question, HIDDENOPTS.txt file does not appear, or rather, only appears ...
AUTO_BIAS = n n = 0-3
n=4 would use the writing process:work?

AUTO_BIAS=4
ENCODE_QUALITY=4 Quality: Ultra High Quality (Extremely Slow)

The AUTO_BIAS setting affects the threshold as to where the decision points are made using AUTOMATIC mode. So if you select anything other than AUTOMATIC, it has no affect at all. But if you set it to a higher value, there is a bias toward using higher quality settings as opposed to lower quality settings. But the decision is still based on frame counts, target size, and bitrate.

[lauguru]

The AUTO_BIAS setting affects the threshold as to where the decision points are made using AUTOMATIC mode. So if you select anything other than AUTOMATIC, it has no affect at all. But if you set it to a higher value, there is a bias toward using higher quality settings as opposed to lower quality settings. But the decision is still based on frame counts, target size, and bitrate.

thanks for reply, but if I put in bdrebuider.ini,
AUTO_BIAS = 4
ENCODE_QUALITY = 4
would be compatible with each other?
or AUTO_BIAS is limited to (3)


http://subir.cc/images/i7way.jpg
edit rebuilder.ini
[Options]
VERSION=0.42.0.2
MODE=0
AUTO_BIAS=4
ENABLE_TEST=1
BLANK_THRESHOLD=1
DTSX_ENABLE=1
AUTO_BIAS=4
MULTIPROCESS=16
MIN_M2TS_SIZE=1
MIN_PLAYLIST_MINS=1
ENCODE_QUALITY=4
ONEPASS_ENCODING=0
AUTO_QUALITY=0
AUDIO_TO_KEEP=all
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=1
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=24925
PRIORITY_CLASS=1
QUICK_EXTRAS=0
AUTO_BURN=0
TARGET_SIZE=24925
ENABLE_BLANKING=1




"I just got a good price an i7-980x (multiprocess = 16)"

:)

[piker]

hello boys BDrebuild 0.42.0.1 does not make the crop

[setarip_old]

@pasadena

Hi!

The purpose of this thread is specifically to bring to light bugs that arise during beta testing, so that jdobbs can resolve them.

You should feel free to start a new thread for postings of other questions and/or observations regarding BDRebuilder...

[LowDead]

hello boys BDrebuild 0.42.0.1 does not make the crop

Please make bug report for the latest version.

[AmigaFuture]

I think I'm missing something in the options. With the new Importing method, I noticed using the SD_PROGRESSIVE that 29 does get changed to 23.976...no re-rendering for 720x480 sources. Video is still jerky via LG Player and software. Would it be possible to add a re-render feature that keeps the same resolution to get a smooth output (SD to SD with Pulldown)? Or are there options I'm not using correctly, or a combination? The SD to 720p does look Good, but I'd rather keep the same 720x480 with a 2 pass encode.

Thanks.

[jdobbs]

I think I'm missing something in the options. With the new Importing method, I noticed using the SD_PROGRESSIVE that 29 does get changed to 23.976...no re-rendering for 720x480 sources. Video is still jerky via LG Player and software. Would it be possible to add a re-render feature that keeps the same resolution to get a smooth output (SD to SD with Pulldown)? Or are there options I'm not using correctly, or a combination? The SD to 720p does look Good, but I'd rather keep the same 720x480 with a 2 pass encode.

Thanks.Does BD Rebuilder tell you it is IVTC'd in the log? If not, then the source isn't using pulldown or you haven't told BD-RB to IVTC in SETUP. That is required to output to 23.976.

But... if both of those are set, and it doesn't IVTC -- then the source isn't pulldown and it can't be output as FILM (23.976). In that case then if it is jumpy, then either the original or your players are at fault.

If you don't want to IVTC, then just uncheck those two and let BD-RB reencode at 29.97. I'd also suggest you use the DEINTERLACE option. Those settings are the default in BD-RB. If you are experiencing jerkiness with the defaults set -- you'd better check on your players -- because the jerkiness isn't coming from the processing.

Just as a note... I'm POSITIVE the IVTC/SD_PROGRESSIVE combination is working correctly. All 45+ of the DVDs I've converted in testing worked correctly using those options and they all used pulldown.

[jdobbs]

I have updated the first post of this thread with links to a new release of BD-RB (v0.42.03). Changes for this version:- Added code to correct for the occasional audio
PTS start delta during DVD importing.
- Corrected an issue in which the framerate for
imported PAL DVDs could be incorrectly pulled
from the source IFO files. This would result
in audio sync issues.
- Made changes to video file import so that DTS-HD,
TRUE-HD, and LPCM sources are properly handled in
.TS and .M2TS files.
- Corrected an error in which importing .TS files
will fail during attempt to create BD structure.
- Other minor corrections and cosmetic fixes.

[AmigaFuture]

I wasn't doubting you. No intention was meant that way. :) Doing some tests. Thanks a lot for the reply.

Ah, sheeeot....hahaha, I forgot about the sizes...I haven't used the custom sizing for a bit. Since episodes are about 42 minutes, the file size has to be taken into account. Laughing at myself!! Got it.

[Paddy97]

Latest version still produces 4:3 output from PAL DVDs. Audio is in sync.

----------------------
[16:49:07] Importing DVD: TIGGER_MOVIE
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[17:00:19] DVD import completed successfully.
----------------------
[09-14-12] BD Rebuilder v0.42.03 (beta)
[17:04:58] Source: TIGGER_MOVIE_PLAYLIST_00000
- Input BD size: 4,45 GB
- Approximate total content: [01:13:57.960]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1280x720, 448Kbs DD5.1
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[17:04:58] PHASE ONE, Encoding
- [17:04:58] Processing: VID_00000 (1 of 1)
- [17:04:58] Extracting A/V streams [VID_00000]
- [17:07:13] Reencoding video [VID_00000]
- Source Video: MPEG-2, 720x576
- Rate/Length: 25,000fps, 110*949 frames
- [17:07:13] Reencoding: VID_00000, Pass 1 of 1
- [17:19:38] Video Encode complete
- [17:19:38] Processing audio tracks
- Track 4354 (swe): Keeping original audio
[17:19:43]PHASE ONE complete
[17:19:43]PHASE TWO - Rebuild Started
- [17:19:43] Building ALTERNATE OUTPUT Structure
[17:20:01] - Encode and Rebuild complete
[17:20:01] JOB: TIGGER_MOVIE finished.


[Status]
LABEL=TIGGER_MOVIE
VERSION=v0.42.03 (beta)
SOURCE_SIZE=4780314624
SOURCE_VIDEO_SIZE=4780314624
TARGET_SIZE=4686086144
REDUCTION=.980288226317381
RESIZE_1080=0
AUDIO_TO_KEEP=eng;swe;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=eng;swe;
BACKUP_MODE=1
MOVIEONLY_TYPE=8
USE_LAVF=0
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=1
REBUILD_COMPLETE=1
[00000]
AUDIO=001000
PGS=00000000
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=4686086144
SPLITS=1
NSIZE=0
FLINK=0
MLINK=0

[Ch3vr0n]

[17:14:40] Importing DVD: COUGARS_INC
- Collecting audio/video/subtitle streams...
- Converting subtitles to BD format...
- Creating BD from audio/video/subtitles...
[17:18:59] DVD import completed successfully.
----------------------
[09/14/12] BD Rebuilder v0.42.03 (beta)
[18:26:01] Source: COUGARS_INC
- Input BD size: 0,00 GB
- Approximate total content: [01:18:38.912]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- MOVIE and MENUS mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DGDecNV [2-way]
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
- [18:26:01] DoEncoding() 00011 1502
[18:26:05] - Failed to complete.
----------------------

Using x264 LAVF was able to start the encoding itself
----------------------
[09/14/12] BD Rebuilder v0.42.03 (beta)
[18:26:20] Source: COUGARS_INC
- Input BD size: 4,22 GB
- Approximate total content: [01:18:38.912]
- Target BD size: 22,95 GB
- Windows Version: 6.0 [6002]
- MOVIE and MENUS mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: X264/LAVF [2-way]
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[18:26:20] PHASE ONE, Encoding
- [18:26:20] Processing: VID_00000 (1 of 1)
- [18:26:20] Extracting A/V streams [VID_00000]
- [18:27:28] Reencoding video [VID_00000]
- [18:27:28] Keeping original video (no reencode)
- [18:27:28] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- [18:27:28] Multiplexing M2TS
[18:30:21]PHASE ONE complete
[18:30:21]PHASE TWO - Rebuild Started
- [18:30:21] Rebuilding BD file Structure
[18:30:21] - Encode and Rebuild complete
[18:30:21] Writing BD structure to ISO file
- ImgBurn completed successfully
- COUGARS_INC folder removed.
- WORKFILES folder removed.
[18:32:49] JOB: COUGARS_INC finished.

However the subtitles were not present in the encode while they were selected in the window, **edit** i mean they were selectable in TMT5, but did not show up. Checked the original source and on the DVD they worked

[Options]
MODE=1
ENCODE_QUALITY=0
ONEPASS_ENCODING=2
AUTO_QUALITY=1
AUDIO_TO_KEEP=dut;eng;nld;und;
SUBS_TO_KEEP=dut;eng;nld;und;
SD_CONVERT=0
COLOR_BOOST=0
RESIZE_1080=0
DEINTERLACE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=1
FULL_AVCHD=0
REMOVE_OUTPUT=1
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23450
PRIORITY_CLASS=1
TARGET_SIZE=23500
AUTO_BURN=2
IMGBURN_TARGET_DEVICE=e:
QUICK_EXTRAS=1
MINIMIZE_TO_TRAY=1
OPEN_GOP=0
MOVIE_ONLY_LOOP=1
USE_FILTERS=0
USE_LAVF=1
VERBOSE_STATUS=1
BDMV_CERT_ONLY=1
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
SD_TO_1080=0
CONVERT_WIDE=0
AUTO_BLANK=0
UNMASK_CHAPTER=1
ENABLE_TEST=1
ENABLE_BLANKING=1
BLANK_THRESHOLD=60
DTSX_ENABLE=1
MULTIPROCESS=1
VERSION=0.42.0.3
COMPLETION_BEEP=1
BEEP_SOUNDFILE=C:\Program Files (x86)\ImgBurn\Sounds\Success.wav
DGDECNV=0
IMPORT_FOLDER=D:\TEMP
[Paths]
WORKING_PATH=C:\TEMP\
SOURCE_PATH=D:\TEMP\IMPORTS\COUGARS_INC\
DGIndexNV=C:\Program Files (x86)\BD_Rebuilder\dgdecnv\DGIndexNV.exe
DGDecNV=C:\Program Files (x86)\BD_Rebuilder\dgdecnv\DGDecodeNV.dll

[Status]
LABEL=COUGARS_INC
VERSION=v0.42.03 (beta)
SOURCE_SIZE=4527117420
SOURCE_VIDEO_SIZE=4527034368
TARGET_SIZE=24641536000
REDUCTION=5.44317779475714
RESIZE_1080=0
AUDIO_TO_KEEP=dut;eng;nld;und;
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=dut;eng;nld;und;
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=-1
INSTANCES=2
DGDECNV=0
QUICK=1
ENCODE_STEP=0
COMPLETED=1
REBUILD_COMPLETE=1
[00000]
USE_ORIGINAL=1
AUDIO=11
PGS=1
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=24641452948
NSTART=27000000
NEND=239351040
NSIZE=4527034368
FLINK=0
MLINK=0


** edit ** also noticed something from the Source path textbox. Seems like the path gets truncated. I have a rip on "Z:\Blu-Ray\Double Layer\DTS-E\UNDERWORLD_RISE_OF_THE_LYCANS" however the path gets truncated to "Z:\Blu-Ray\Double".

[Adbear]

When converting a DVD to Blu-ray is there any way to stop it from converting all the subtitles and only convert the ones you want to keep? Some of my DVD's have 15+ subtitle tracks which takes around 8 minutes to convert when I only want to keep 1 of them

[omegaman7]

When converting a DVD to Blu-ray is there any way to stop it from converting all the subtitles and only convert the ones you want to keep? Some of my DVD's have 15+ subtitle tracks which takes around 8 minutes to convert when I only want to keep 1 of them

Once BD-RB imports the dvd/s, you should be able to enter setup and deselect the ones you don't wanna keep. Perhaps even double click on the individual subs ;)

I Haven't tried this yet, but it appears that way to me.

Jdobbs! That's awesome LOL! You convert the Mpeg 2 to BD compliancy on the fly. No actual encoding is done. Simply wonderful. Expect a donation soon ;) If one however wants to upscale, or make serious changes, obviously one needs to re-encode.

[Ch3vr0n]

that's true for BD's, i didn't check this on my last DVD encode but it pretty much converted them all automatically

[omegaman7]

Well yes. In the import section. If one wants to make actual changes, then they need to reencode, eh?

[Adbear]

It doesn't, it imports and converts all the subs automatically, then after 8-10 mins of importing it fails.

[omegaman7]

I imported "Unthinkable" without any failures :S Must be unique circumstances.

[Adbear]

looks that way, the next disc imported, made into a Blu-ray, but no subtitles on the output

[omegaman7]

I greatly look forward to more advancements. A simplistic menu would be very appealing. Perhaps a design, that allows the user to import their own buttons. For instance, I love creating my own PNG images, and adding them to the appropriate Nero Vision folders ;)

Never tried it with ConvertX. Perhaps that's possible though.

[jdobbs]

Well yes. In the import section. If one wants to make actual changes, then they need to reencode, eh? For a DVD import, you can burn directly from that folder if you wish. For other imports (like MP4, MKV, etc) you can't do that -- as the audio/video isn't necessarily BD compliant at that point. That's why I call those a "Pseudo-BD" format. For example, some of the video sources may need borders added during encoding in order to be a standard BD compliant format.

[jdobbs]

I imported "Unthinkable" without any failures :S Must be unique circumstances. I'm at about 50 imports of DVDs now. No issues, not failures during conversion, all in sync, all subs working (but all NTSC). If folks are having issues, I'd like to get details as to what they are experiencing so I can see what's different about their attempts.

[jdobbs]

looks that way, the next disc imported, made into a Blu-ray, but no subtitles on the output What are you using to play it back? I've tested with two Samsung standalone players and with PowerDVD 11 -- and both are working correctly. Is this NTSC or PAL? What disc are you trying?

[jdobbs]

I greatly look forward to more advancements. A simplistic menu would be very appealing. Perhaps a design, that allows the user to import their own buttons. For instance, I love creating my own PNG images, and adding them to the appropriate Nero Vision folders ;)

Never tried it with ConvertX. Perhaps that's possible though. That's likely in a couple more releases. But first I need to address the bugs being reported.

Frankly, though, I'm doing this for selfish reasons, as I like to combine vintage series discs from DVD into BD format. The import is just the first step into supporting that.

[omegaman7]

Thanks for the clarification. Donation on the way. I had a very hefty payday :D

[Adbear]

What are you using to play it back? I've tested with two Samsung standalone players and with PowerDVD 11 -- and both are working correctly. Is this NTSC or PAL? What disc are you trying?I'm testing The Transporter PAL disc, subtitles work in PDVD 12, but not TMT 5. In TMT 5 it plays back random lines of the subtitles, so you'll get one screen of subtitles, then you may not get any for a few seconds or a few minutes even though people are still talking

[jdobbs]

I'm testing The Transporter PAL disc, subtitles work in PDVD 12, but not TMT 5. In TMT 5 it plays back random lines of the subtitles, so you'll get one screen of subtitles, then you may not get any for a few seconds or a few minutes even though people are still talking Ugghh... I hate it when it works on one player and not another, especially the "random line" thing. There's only one format, why would it act differently (especially in the way it draws from the provided description)?

Oh well... there may be a lot of horsecrap covering the floor -- but at least that indicates that there's a pony in there somewhere.

[sytyguy]

I imported 1 movie successfully, and subtitles were there.

[Adbear]

I also made an MKV of the same disc, the MKV plays back in PDVD 12, but crashes MPC-HC and makes TMT 5 lock up before it ever starts playing the file

[Ch3vr0n]

What are you using to play it back? I've tested with two Samsung standalone players and with PowerDVD 11 -- and both are working correctly. Is this NTSC or PAL? What disc are you trying?


What i'm using is TMT 5.3, i'll burn it to a blank DVD-R. Might aswell test if my player can do BD5 on the same go

Pal disc, which disc see my log post. Tested the ISO with PDVD 11 aswell, PDVD11 plays it just fine subs too. So looks like it's a TMT 5 issue

[jdobbs]

I also made an MKV of the same disc, the MKV plays back in PDVD 12, but crashes MPC-HC and makes TMT 5 lock up before it ever starts playing the file You ran it through BD-RB and created the MKV from there? I can't imagine how you could have issues there. MKV doesn't have much in terms of rules about formats for the most part -- and the MKV is created with MKVMERGE -- which is very reliable.

[Adbear]

Yep, after building the Blu-ray I just told it to make an MKV from the same disc[09/14/12] BD Rebuilder v0.42.03 (beta)
[22:17:31] Source: TRANSPORTER_PLAYLIST_00000
- Input BD size: 4.02 GB
- Approximate total content: [01:28:23.119]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1280x720, 448Kbs DD5.1
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[22:17:31] PHASE ONE, Encoding
- [22:17:31] Processing: VID_00000 (1 of 1)
- [22:17:31] Extracting A/V streams [VID_00000]
- [22:17:45] Reencoding video [VID_00000]
- Source Video: MPEG-2, 720x576
- Rate/Length: 25.000fps, 132,578 frames
- [22:17:45] Reencoding: VID_00000, Pass 1 of 1
- [22:58:03] Video Encode complete
- [22:58:03] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[22:58:05]PHASE ONE complete
[22:58:05]PHASE TWO - Rebuild Started
- [22:58:05] Building ALTERNATE OUTPUT Structure
[22:58:19] - Encode and Rebuild complete
- WORKFILES folder removed.
[22:58:19] JOB: TRANSPORTER finished.

[lauguru]

hello jdobbs
would be possible to add a function to "pause" while processing 1 pass or 2 pass.

when you cancel .. you have to redo the entire pass again. It would be great and appreciated

[jdobbs]

hello jdobbs
would be possible to add a function to "pause" while processing 1 pass or 2 pass.

when you cancel .. you have to redo the entire pass again. It would be great and appreciated

Sorry. There's really no reliable way to do that.

[raul124]

Hello team BD, I know this is not a bug or anything, but I see a lot of you fellows discussing this new way of transforming a regular DVD into a HD format
I would like to understand this new way of importing a DVD and transcode it into a Blu ray Farmat. What do I need to have and how to make the job complete..
Do I burn one of DVD collection in the hard drive with clonedvd and then use BD rebuilder to import it via file import dvd, and let BD rebuilder do it’s fantastic thing.. Thank you Mr. jdobbs for a cool and wonderful software!!! my hat off to you Sir.

[lauguru]

Sorry. There's really no reliable way to do that.
ok thanks

[jdobbs]

Hello team BD, I know this is not a bug or anything, but I see a lot of you fellows discussing this new way of transforming a regular DVD into a HD format
I would like to understand this new way of importing a DVD and transcode it into a Blu ray Farmat. What do I need to have and how to make the job complete..
Do I burn one of DVD collection in the hard drive with clonedvd and then use BD rebuilder to import it via file import dvd, and let BD rebuilder do it’s fantastic thing.. Thank you Mr. jdobbs for a cool and wonderful software!!! my hat off to you Sir. If you have AnyDVD running, all you have to do is insert the DVD, click on "Import/DVD", point to the DVD, and let BD-RB import it. After it is imported, BD-RB will be pointing to the import and when you have the settings the way you'd like them -- personally I would select "Convert SD to HD" -- just click on the "Backup" button.

[ps2xbox]

Hello, i have tried to rip this bd mivies, the output in all case was a bdmv folder of 16 -17 gb with half film.
The log is in the bottom.
What's wrong?
You resolve this bug with last version?



09/05/12] BD Rebuilder v0.41.01 (beta)
[21:12:56] Source: THE_AVENGERS_BD
- Input BD size: 39,95 GB
- Approximate total content: [03:07:28.194]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[21:12:57] PHASE ONE, Encoding
- [21:12:57] Processing: VID_00252 (1 of 14)
- [21:12:57] Extracting A/V streams [VID_00252]
- [21:14:32] Reencoding video [VID_00252]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 16.323 frames
- Bitrate: 9.842 Kbs
- [21:14:32] Reencoding: VID_00252, Pass 1 of 1
- [21:25:35] Video Encode complete
- [21:25:35] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [21:25:35] Multiplexing M2TS
- [21:25:51] Processing: VID_00527 (2 of 14)
- [21:25:51] Extracting A/V streams [VID_00527]
- [21:26:09] Reencoding video [VID_00527]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.979 frames
- Bitrate: 10.005 Kbs
- [21:26:09] Reencoding: VID_00527, Pass 1 of 1
- [21:29:30] Video Encode complete
- [21:29:30] Processing audio tracks
- Track 4353 (ita): Keeping original audio
- [21:29:30] Multiplexing M2TS
- [21:29:36] Processing: VID_00528 (3 of 14)
- [21:29:36] Extracting A/V streams [VID_00528]
- [21:29:49] Reencoding video [VID_00528]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.488 frames
- Bitrate: 15.705 Kbs
- [21:29:49] Reencoding: VID_00528, Pass 1 of 1
- [21:33:19] Video Encode complete
- [21:33:19] Processing audio tracks
- Track 4353 (ita): Keeping original audio
- [21:33:19] Multiplexing M2TS
- [21:33:26] Processing: VID_00800 (4 of 14)
- [21:33:26] Extracting A/V streams [VID_00800]
- [22:02:00] Reencoding video [VID_00800]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 205.592 frames
- Bitrate: 16.314 Kbs
- [22:02:01] Reencoding: VID_00800, Pass 1 of 1
- [23:58:31] Video Encode complete
- [23:58:31] Processing audio tracks
- Track 4354 (ita): Keeping original audio
- [23:58:31] Multiplexing M2TS
- [00:04:43] Processing: VID_00879 (5 of 14)
- [00:04:43] Extracting A/V streams [VID_00879]
- [00:05:03] Reencoding video [VID_00879]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 3.689 frames
- Bitrate: 9.847 Kbs
- [00:05:03] Reencoding: VID_00879, Pass 1 of 1
- [00:11:06] Video Encode complete
- [00:11:06] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:11:06] Multiplexing M2TS
- [00:11:15] Processing: VID_00880 (6 of 14)
- [00:11:15] Extracting A/V streams [VID_00880]
- [00:11:30] Reencoding video [VID_00880]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.492 frames
- Bitrate: 9.846 Kbs
- [00:11:30] Reencoding: VID_00880, Pass 1 of 1
- [00:13:58] Video Encode complete
- [00:13:58] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:13:58] Multiplexing M2TS
- [00:14:05] Processing: VID_00881 (7 of 14)
- [00:14:05] Extracting A/V streams [VID_00881]
- [00:14:28] Reencoding video [VID_00881]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 4.398 frames
- Bitrate: 9.846 Kbs
- [00:14:28] Reencoding: VID_00881, Pass 1 of 1
- [00:18:27] Video Encode complete
- [00:18:27] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:18:27] Multiplexing M2TS
- [00:18:34] Processing: VID_00882 (8 of 14)
- [00:18:34] Extracting A/V streams [VID_00882]
- [00:18:44] Reencoding video [VID_00882]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.267 frames
- Bitrate: 9.840 Kbs
- [00:18:44] Reencoding: VID_00882, Pass 1 of 1
- [00:20:47] Video Encode complete
- [00:20:47] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:20:47] Multiplexing M2TS
- [00:20:53] Processing: VID_00883 (9 of 14)
- [00:20:53] Extracting A/V streams [VID_00883]
- [00:21:08] Reencoding video [VID_00883]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.401 frames
- Bitrate: 9.846 Kbs
- [00:21:08] Reencoding: VID_00883, Pass 1 of 1
- [00:25:51] Video Encode complete
- [00:25:51] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:25:51] Multiplexing M2TS
- [00:25:58] Processing: VID_00884 (10 of 14)
- [00:25:58] Extracting A/V streams [VID_00884]
- [00:26:06] Reencoding video [VID_00884]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 1.017 frames
- Bitrate: 9.846 Kbs
- [00:26:06] Reencoding: VID_00884, Pass 1 of 1
- [00:27:54] Video Encode complete
- [00:27:54] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:27:54] Multiplexing M2TS
- [00:27:59] Processing: VID_00885 (11 of 14)
- [00:27:59] Extracting A/V streams [VID_00885]
- [00:28:14] Reencoding video [VID_00885]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 2.328 frames
- Bitrate: 9.842 Kbs
- [00:28:14] Reencoding: VID_00885, Pass 1 of 1
- [00:33:20] Video Encode complete
- [00:33:20] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:33:20] Multiplexing M2TS
- [00:33:27] Processing: VID_00886 (12 of 14)
- [00:33:27] Extracting A/V streams [VID_00886]
- [00:33:51] Reencoding video [VID_00886]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 3.963 frames
- Bitrate: 9.845 Kbs
- [00:33:51] Reencoding: VID_00886, Pass 1 of 1
- [00:36:36] Video Encode complete
- [00:36:36] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:36:36] Multiplexing M2TS
- [00:36:43] Processing: VID_00887 (13 of 14)
- [00:36:43] Extracting A/V streams [VID_00887]
- [00:37:21] Reencoding video [VID_00887]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 5.879 frames
- Bitrate: 9.843 Kbs
- [00:37:21] Reencoding: VID_00887, Pass 1 of 1
- [00:45:20] Video Encode complete
- [00:45:20] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [00:45:20] Multiplexing M2TS
- [00:45:32] Processing: VID_00888 (14 of 14)
- [00:45:32] Extracting A/V streams [VID_00888]
- [00:46:28] Reencoding video [VID_00888]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 9.317 frames
- Bitrate: 10.030 Kbs
- [00:46:28] Reencoding: VID_00888, Pass 1 of 1
- [01:04:12] Video Encode complete
- [01:04:12] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [01:04:12] Multiplexing M2TS
[01:04:27]PHASE ONE complete
[01:04:27]PHASE TWO - Rebuild Started
- [01:04:27] Rebuilding BD file Structure
[01:04:46] - Encode and Rebuild complete
- WORKFILES folder removed.
[01:04:46] JOB: THE_AVENGERS_BD finished.

[jdobbs]

Are these original commercial discs? Are you positive the problem isn't already there before processing? I've gotten no other reports of anything even remotely similar to this. I'd suggest you uninstall BD-RB, HAALI, FFDSHOW, and AVISYNTH -- then reinstall all of them following the first post of this thread exactly. Something has to be interfering.

Another possibility... is your system overclocked? That scenario might happen if somehow your computer is overheating and X264 is dumping out halfway through the encode... most of the time, though, you'd expect a "crash" message, but stranger things have happened.

[raul124]

If you have AnyDVD running, all you have to do is insert the DVD, click on "Import/DVD", point to the DVD, and let BD-RB import it. After it is imported, BD-RB will be pointing to the import and when you have the settings the way you'd like them -- personally I would select "Convert SD to HD" -- just click on the "Backup" button.
Hi Mr. jdobbs thanks for the quick response as always, I get this:no working path specified. Cannot import.
Sorry for not getting it.. I click file in BD rebuilder, click on import, click import (DVD only) browse for folder, and then I click the drive where the DVD is, i get the message; no working path specified. cannot import. sorry for taking your valueble time , your rather spend it solving issues with BD reb.:o:thanks:

[ps2xbox]

Are these original commercial discs? Are you positive the problem isn't already there before processing? I've gotten no other reports of anything even remotely similar to this. I'd suggest you uninstall BD-RB, HAALI, FFDSHOW, and AVISYNTH -- then reinstall all of them following the first post of this thread exactly. Something has to be interfering.

Another possibility... is your system overclocked? That scenario might happen if somehow your computer is overheating and X264 is dumping out halfway through the encode... most of the time, though, you'd expect a "crash" message, but stranger things have happened.


jdobbs, thanks for the answer,
they are bd50 that i download from the web.
i've format the pc and reinstall bdr haali..etc but same results
At the end My system not overclocked but i'm sure that the temperature of the pc goes up during ripping

[omegaman7]

Hi Mr. jdobbs thanks for the quick response as always, I get this:no working path specified. Cannot import.
Sorry for not getting it.. I click file in BD rebuilder, click on import, click import (DVD only) browse for folder, and then I click the drive where the DVD is, i get the message; no working path specified. cannot import. sorry for taking your valueble time , your rather spend it solving issues with BD reb.:o:thanks:

Virtual drive? Optical drive? Loading a dvd over the network?

[raul124]

Virtual drive? Optical drive? Loading a dvd over the network?

optical drive in my pc..

[jdobbs]

optical drive in my pc.. That should work fine. Try clicking on the VIDEO_TS folder. You can also copy the disc to a folder on your hard drive.

[jdobbs]

Hi Mr. jdobbs thanks for the quick response as always, I get this:no working path specified. Cannot import.
Sorry for not getting it.. I click file in BD rebuilder, click on import, click import (DVD only) browse for folder, and then I click the drive where the DVD is, i get the message; no working path specified. cannot import. sorry for taking your valueble time , your rather spend it solving issues with BD reb.:o:thanks: I just tested it on my system doing exactly what you've described and it works correctly. This is a working video DVD, right? Not a disc that has video files on it?

[Adbear]

jdobbs, thanks for the answer,
they are bd50 that i download from the web.
i've format the pc and reinstall bdr haali..etc but same results
At the end My system not overclocked but i'm sure that the temperature of the pc goes up during ripping
If they are web downloads then I wouldn't expect any help here. Not only are they pirated, but you have no idea what pre-processing has been done on the files

[raul124]

I just tested it on my system doing exactly what you've described and it works correctly. This is a working video DVD, right? Not a disc that has video files on it?
It's the original DVD disc " DUNE disc 1"; "not a copy" and still get no working path specified. cannot import. I have BD reb. setup to convert to sd to hd. and your regular specific setup..

[jdobbs]

It's the original DVD disc " DUNE disc 1"; "not a copy" and still get no working path specified. cannot import. I have BD reb. setup to convert to sd to hd. and your regular specific setup.. This might be a silly question... but have you set a working path (the second browse button at the top of the dialog)? You have to select a place for BD-RB to store things before it can import -- otherwise it has nowhere to put the files.

[LowDead]

I also got the "no working path specified" error and after putting in a working path it worked flawlessly. Maybe it is good to have a check built in and if no working path is selected there will be a pop up window to specify the working path (instead of the error message)?

[jdobbs]

I also got the "no working path specified" error and after putting in a working path it worked flawlessly. Maybe it is good to have a check built in and if no working path is selected there will be a pop up window to specify the working path (instead of the error message)? That may be a good idea.

[omegaman7]

That may be a good idea.

Seems like you implemented something on Dvd Rebuilder if no working path was specified.

[jdobbs]

Seems like you implemented something on Dvd Rebuilder if no working path was specified.

I think the problem was that the code was allowing you to browse for the file or folder to import first -- and then gave the error after the fact. That makes it confusing as to what the issue really is. So I moved the check for the working folder up front, and now it asks you to set a working folder before you can browse for something to import.

[omegaman7]

I think the problem was that the code was allowing you to browse for the file or folder to import first -- and then gave the error after the fact. That makes it confusing as to what the issue really is. So I moved the check for the working folder up front, and now it asks you to set a working folder before you can browse for something to import.

Quite logical ;)

[raul124]

This might be a silly question... but have you set a working path (the second browse button at the top of the dialog)? You have to select a place for BD-RB to store things before it can import -- otherwise it has nowhere to put the files.
Yes Sir Mr. jdobbs it looks like i needed to select the working folder first and than imports the movie.. thank you BD team.:)

[sytyguy]

I had the same problem, but it was obvious to me to direct it to a "working Path". In fact, I put it into the "INI" file, and it worked like a charm. I'm sorry, but I don't understand the problem, it seems so obvious.

And I'm a novice at this.

[ps2xbox]

If they are web downloads then I wouldn't expect any help here. Not only are they pirated, but you have no idea what pre-processing has been done on the files

Dear jdobbs,
this kind of movie is only decrypt from the commercial disc,
i've downloaded from the same website hundred of this kind and never has this problem.
The problem starts with battleship and so the avengers and cinderella...
Also i've tried to rip this blu ray on my desktop pc and on the notebook with same results..

[Adbear]

Dear jdobbs,
this kind of movie is only decrypt from the commercial disc,
i've downloaded from the same website hundred of this kind and never has this problem.
The problem starts with battleship and so the avengers and cinderella...
Also i've tried to rip this blu ray on my desktop pc and on the notebook with same results..
What difference does that make? You don't have the original discs and therefore you have no idea what pre-processing was done when the disc was ripped. If you read through this long thread he's said many times he will not do bug reports on torrents as you have no idea what's been done to them.

From the very first post in this threadBD-RB is meant as a means of backing up copies of discs THAT YOU OWN

[Ch3vr0n]

That and the fact that this is not a pirated movies support forum.

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[jdobbs]

Dear jdobbs,
this kind of movie is only decrypt from the commercial disc,
i've downloaded from the same website hundred of this kind and never has this problem.
The problem starts with battleship and so the avengers and cinderella...
Also i've tried to rip this blu ray on my desktop pc and on the notebook with same results.. I'm sorry, but I have to go with what the evidence provides. You're convinced it isn't your source or your system that is the root of the problem. Then how do you balance that against the the thousands of thousands of others who are successfully using the software and aren't losing any of the movie? I've personally done way over 3000 encodes (probably closer to 4000) in testing... and have never had your report happen even once. I also have yet to get another report of anyone having that issue -- and that is one that would be pretty obvious.

My rule for only supporting reports from original sources isn't philosophical or judgemental -- it is based on my considerable experience, which has proven to me that 99% of all bug reports that involved preprocessed sources were caused by the preprocessing and not my software. The other 1% will come to light in commercial discs as well.

Please try testing on at least one commercial disc -- and I think you'll find that it works correctly. If not, post your log and let's talk.

[laserfan]

Dear jdobbs,
this kind of movie is only decrypt from the commercial disc,
i've downloaded from the same website hundred of this kind and never has this problem.
The problem starts with battleship and so the avengers and cinderella...
Also i've tried to rip this blu ray on my desktop pc and on the notebook with same results..
@jdobbs--you are a moderator here. Isn't helping this guy strictly against the rules?

[jdobbs]

@jdobbs--you are a moderator here. Isn't helping this guy strictly against the rules? Here's the rule:6) No warez, cracks, serials or illegally obtained copyrighted content! Links to content of a questionable nature (e.g. anything you don't own and/or have downloaded), asking for, offering, or asking for help/helping to process such content in any way or form is not tolerated. So, yeah, it is strictly against the rules.

I certainly don't know whare you get the idea I'm helping him. In fact my first response after his revealing the source was downloaded was telling him he wasn't going to get help (after it had already been clearly stated by Adbear). I think it is pretty straightforward in reviewing the posts following that point that no one else has "helped" him in anything related to his downloads or with the problem he reported since it became apparent that it was a download.

But as I said, my refusal to go any further is more from a practical perspective than a philosophical one. I'm don't have to slam him... I'm just not going to accept a bug report against a downloaded source. In other words -- I don't need to be judgmental in this case, because downloaded sources are rejected for a more objective reason.

[omegaman7]

Can't seem to get the "IMPORT_FOLDER" option to work. Likely doing something wrong. I also notice it's not in the hiddenopts.txt file.

Could we get a brief description/directions on how this option works? I tried the exact command in the INI file, as well as the directory "IMPORT_FOLDER=(Directory/folder with vid files)". No apparent changes have been made to the GUI to support the importing of a folder?

I suppose since it's a hidden option, you wouldn't update the GUI ;)

[Ch3vr0n]

its not a hidden option and works just fine. The GUI HAS been changed and the import feature is under the first menu. "File", you need v42.03 for it

[omegaman7]

What I meant was, the GUI hasn't been changed to accommodate a FOLDER import. Files work just fine. Have you gotten it to load multiple files simultaneously?

I see Batch queue allows the selecting of multiple files. That may be all I need :S

Blind as a bat!!! Batch Queue is plural. My apologies.

[AmigaFuture]

That's likely in a couple more releases. But first I need to address the bugs being reported.

Frankly, though, I'm doing this for selfish reasons, as I like to combine vintage series discs from DVD into BD format. The import is just the first step into supporting that.

OOoohhh...Awesome! I'm diggin' your selfishness. It's an awesome way to live, and it flows to others. Much more healthy and fun than the other "normal" way. I've noticed something with my DVDs of "The Mentalist", the "Extras", or smaller streams aren't shown in the import list. I'm using HandBrake for them, curently. I haven't tried many DVDs yet..so... Do the smaller "Extras" show for you?

Sweet to know it's a step to more, jdobbs!

[jdobbs]

OOoohhh...Awesome! I'm diggin' your selfishness. It's an awesome way to live, and it flows to others. Much more healthy and fun than the other "normal" way. I've noticed something with my DVDs of "The Mentalist", the "Extras", or smaller streams aren't shown in the import list. I'm using HandBrake for them, curently. I haven't tried many DVDs yet..so... Do the smaller "Extras" show for you?

Sweet to know it's a step to more, jdobbs! I put an arbitrary threshold at 15 minutes. Anything less than that isn't included for consideration. That way most DVDs don't require you to decide on a title -- since there is only one that is over 15 minutes. I'll probably add an option in the next release where you can set that threshold to any value.

[jdobbs]

Can't seem to get the "IMPORT_FOLDER" option to work. Likely doing something wrong. I also notice it's not in the hiddenopts.txt file.

Could we get a brief description/directions on how this option works? I tried the exact command in the INI file, as well as the directory "IMPORT_FOLDER=(Directory/folder with vid files)". No apparent changes have been made to the GUI to support the importing of a folder?

I suppose since it's a hidden option, you wouldn't update the GUI ;)I'm using it now. Here's how I'm doing it:

I have a D: drive that I used for my encodings. It has a few working folders on it (WORKING1, WORKING2...). If I leave BD-RB at it's default, and I have "D:\WORKING1\" selected -- the IMPORTS folder will be created on-demand in WORKING1 (when I import). But it is faster and more efficient if I keep the imports on another drive. I have a 3TB drive that is referenced as P:\ that I like to use for this kind of purpose. So I added this to the "[Options]" area of my config/INI file:

IMPORT_FOLDER=P:\

So now when I import -- the BD and Psuedo-BD structures will be automatically saved in a folder called "P:\IMPORTS\".

By the way, the intermediate files (.264, .MPV, .AC3, .DTS, etc) that are used when collecting the files/converting, etc. are stored in a folder called TEMPIMPORT in the working folder. But it is removed immediately after it is used.

[omegaman7]

Ok. I believe I understand. Thanks :) I too have multiple 2/3Tb drives.

[laserfan]

I certainly don't know whare you get the idea I'm helping him.
Really? Pretty simple; the post I responded to could/should have simply said "I can't help with your downloaded material" but instead you expended all this energy, which starts with an APOLOGY for cryin' out loud:

I'm sorry, but I have to go with what the evidence provides. You're convinced it isn't your source or your system that is the root of the problem. Then how do you balance that against the the thousands of thousands of others who are successfully using the software and aren't losing any of the movie? I've personally done way over 3000 encodes (probably closer to 4000) in testing... and have never had your report happen even once. I also have yet to get another report of anyone having that issue -- and that is one that would be pretty obvious.

My rule for only supporting reports from original sources isn't philosophical or judgemental -- it is based on my considerable experience, which has proven to me that 99% of all bug reports that involved preprocessed sources were caused by the preprocessing and not my software. The other 1% will come to light in commercial discs as well.

Please try testing on at least one commercial disc -- and I think you'll find that it works correctly. If not, post your log and let's talk.
Just because I'm paranoid, that doesn't mean there aren't forces at work to try to put Doom9 out-of-existence! :p

[jdobbs]

Really? Pretty simple; the post I responded to could/should have simply said "I can't help with your downloaded material" but instead you expended all this energy, which starts with an APOLOGY for cryin' out loud:


Just because I'm paranoid, that doesn't mean there aren't forces at work to try to put Doom9 out-of-existence! :p Well... I disagree. I'm clearly spending more energy answering your post than his...

I just believe there's never anything wrong with a little common courtesy.

[AmigaFuture]

I put an arbitrary threshold at 15 minutes. Anything less than that isn't included for consideration. That way most DVDs don't require you to decide on a title -- since there is only one that is over 15 minutes. I'll probably add an option in the next release where you can set that threshold to any value.

Ahhhh.. I thought it would be something like that. Okay. For now, HandBrake. Thank You.

"I just believe there's never anything wrong with a little common courtesy."

Nice. Agreed.

[AmigaFuture]

Revisiting "Toy Story"...before I tested MKV output, and it's been a while since I watched my Blu-ray...I figured I'd make a backup with extras kept except trailers and warnings. The main screen "jerks" a little before the menu shows and the rest of the menu is smooth. Selecting play, the warnings are gone, as checked, but playing from 17 minutes 37 seconds to 17m 54s, I can hear the switch between streams and notice the out of sync with video and audio that happens with my LG (Standalone) Blu-ray player. That's as far as I've watched and listened.

Logs look good, so...not sure what to share other that visual and audio experience. Let me know...and I'll share it. Thanks. Movie & Menus, Edit Mode, Quicker and MULTI-PROCESS active. I disabled MP, same thing. I'll set for full backup next.

0.42.03.

Update: I'm attempting a Full Backup with Quick for extras, and BD-RB reports this error: "BD Rebuilder experienced an error 1801 [12:52:27] ReencodeAudio() 00075 1801".
I'll deactivate "Quicker" and see what BD-RB does.

Update: I burned the rip to a RW..same jitter noticed. I'll have AnyDVD HD rip again soon. Some other testing with other stuff..

[omegaman7]

Ran AVATAR_CE_D2 And Disc 3 last night in batch mode. D2 came out 2Gb over sized under "Better" quality setting. I used X264 LAVF frame server. I now plan to use DGDecNV for frameserving on this one. I recall it being more intelligent about output sizes :p

I'm afraid I didn't save any of the output, given I'm coming very close to full hard drives. 13Tb, And I'm close LOL! :S

[SquallMX]

Ran AVATAR_CE_D2 And Disc 3 last night in batch mode. D2 came out 2Gb over sized under "Better" quality setting. I used X264 LAVF frame server. I now plan to use DGDecNV for frameserving on this one. I recall it being more intelligent about output sizes :p

I'm afraid I didn't save any of the output, given I'm coming very close to full hard drives. 13Tb, And I'm close LOL! :S

LAVF detects all sources as 25 fps, so, if the Blu-ray contains a lot of 30 fps material the output will be over-sized.

[De_Hollander]

Can i use the last ffdshow fdshow_rev4486_20120825_clsid_x64.exe

re-encode in 64 bit, then i guess must use 64 bit FFDshow and Haali Media Splitter ?

[Adbear]

You have to use the versions linked to on the very first post of this thread. If you use any other versions then any error reports will be ignored

[De_Hollander]

but how can i re-encode with 64 bit, the ffdshow in the link isn't 64 bit.

[Wizzu]

An update about one of my issues.

I finally found the culprit and it could maybe help someone else in the future...

It had nothing to do with CPU, BD-RB config, FFDShow config or AFTEN config.

The error occurs ONLY if the destination folder has the "§" character in its name.
Exit the "§" in the destination folder's name and voilà, everything works fine.

I guess the presence of the character interferes with some part of the code used for audio re-encoding.

Issue was:
On one of my systems, I can't get bd rebuilder to work on any Blu-Ray with HD audio.... :(

AFTEN errors when encoding AC3.

Here is what I get each and every time:

- [00:01:04] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [00:01:07] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- ERROR in attempt to reencode audio (AFTEN) [AUD_00506_4352.AVS]
[00:01:08] - Failed to reencode audio, aborted

I tried everything I could think of: Re-configuring ffdshow, Uninstalling/reinstalling ffdshow, haaali and AVSynth... no joy.

I compared the settings (ffdshow and bd rebuilder) with my other computer, they are exactly the same.

Both computers run XP SP3.

But... everything works fine on the other computer and not on this one!

I'm at a loss. :confused:

[Adbear]

but how can i re-encode with 64 bit, the ffdshow in the link isn't 64 bit.
You asked the question if you could use the 64bit version to which I replied. If you don't use the versions on the first post then don't expect any help if you have encoding issues. Jdobbs tests with those versions.
If I remember correctly, if you want it to use 64bit encoding then you tick 'Use X264's internal LAVF for decoding', although if you have a fast system and want it to split the files for better system usage then you need to turn that option off

[De_Hollander]

oke i use the recommed versions
But 64 bit ('Use X264's internal LAVF for decoding') belongs to work faster ? On a windows 7 64 bit.

I have a quad 9400 overclocked to 3.4 ghz have 4 gig memory

I have seen a bug, in the setup i have checked dutch subs on subtitellanguages to keep.
save changes. When i load a blu-ray, all the subtitels are not enabled. Why?
I must dubbelclick on the dutch subs in the window to enable. then i see a icon before the sub dutch.

[Adbear]

post up your bdrebuilder.ini file

[De_Hollander]

[Options]
VERSION=0.42.0.3
MODE=2
ENCODE_QUALITY=2
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=24500
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=dut;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=1
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=24500
PRIORITY_CLASS=0
TWEAK_PASS_TWO=--filter -3,-3 --me umh --merange 32 --trellis 2 --no-mbtree
[Paths]
WORKING_PATH=E:\AVCHDCODER WERK\
SOURCE_PATH=F:\RAIDERS OF THE LOST ARK BDREMUX\

[Adbear]

I wonder if on that disc the subtitles are on as NLD rather than Dutch. Try scrolling down to the 'N' section and tick the Dutch one in there as well

[De_Hollander]

I wonder if on that disc the subtitles are on as NLD rather than Dutch. Try scrolling down to the 'N' section and tick the Dutch one in there as wellthat's do the trick
thanks problem solved

[omegaman7]

LAVF detects all sources as 25 fps, so, if the Blu-ray contains a lot of 30 fps material the output will be over-sized.

I use X264 LAVF religiously. Because I don't 100% trust DGDecNV yet. As far as being faster on my system anyhow. Oversizing is extremely rare. In this case, DGDecNV hit the output size almost on the money :) I'm very likely getting the AMD 1090t to replace my 965 quad very soon. Can't wait to see the measurable increase in speed! ;) I won't be playing with AM3+ until February when I get my tax return. :devil:

[Adbear]

You might want to check that before buying it, I'm pretty sure they don't make it any more.


Sorry for going OT

[sytyguy]

Yep, he's correct, it is discontinued, however, Amazon as some "used like new" ones, http://www.amazon.com/gp/offer-listing/B003FVI2KQ/ref=dp_olp_0?ie=UTF8&condition=all

[omegaman7]

They're available...

However expensive!!!

[Dominux]

Hello :)
BD Rebuilder is excellent program, thank you for it:thanks::thanks::thanks:
I have a question - it possible in this program add other audio in movie?
I see only .mkv, .mp4, .avi, .ts file in import option.

[AmigaFuture]

If you LIKE and USE the program a lot, PLEASE support Jdobbs. There is a DONATION link the Jdobbs signature. Click it. Let Jdobbs know you LIKE/Love the passion for what currently is and how much you've used it. Do ~more~ that type ~thanks~. :D It's your choice and my advocacy for it's continual evolution.

[Dominux]

It's a good idea:goodpost:
I donate this, transfer made:):):)
Not much but it's always something.

[SquallMX]

I use X264 LAVF religiously. Because I don't 100% trust DGDecNV yet.

I´m doing exactly the same, fortunately 29.97 fps content is extremely rare on most new blu-rays. The only issue I have is about the compatibility of the streams created using LAVF, since the vbv-buffer and vbv-maxrate values are calculated for a 25 fps framerate not a 23.976/29.97 one.

[kanerulz69]

i usually only do full backup 25gb disc well i decided to do one to a dvd5 disc with menu special features intact etc, but the output files are the same bdmv etc, there wasn't any vob files etc, is there no way to put a full back up with menu etc to dvd5 dvdr disc like normal movie? or i have to use a blu-ray disc?

[omegaman7]

i usually only do full backup 25gb disc well i decided to do one to a dvd5 disc with menu special features intact etc, but the output files are the same bdmv etc, there wasn't any vob files etc, is there no way to put a full back up with menu etc to dvd5 dvdr disc like normal movie? or i have to use a blu-ray disc?

Normal movie? LOL! Blu-ray is quickly becoming the standard/normal. :p

I know what you mean though. You want a dvd compliant backup, to play in a 'DVD' player. Bd Rebuilder currently only converts the main movie to Dvd output. THere is no known way to convert the menu over to dvd output.

[kanerulz69]

Normal movie? LOL! Blu-ray is quickly becoming the standard/normal. :p

I know what you mean though. You want a dvd compliant backup, to play in a 'DVD' player. Bd Rebuilder currently only converts the main movie to Dvd output. THere is no known way to convert the menu over to dvd output.

LOL yes i know, but its for someone who only has a dvd player and not a blu-ray, but what i dont get is a have 2 sony blu-ray players and i used imgburn and build and it converted to iso and burned and i played it in the players and the special features have sound but the main movie doesnt? but when i put the disc in my pc it plays the sound, dont get it

[omegaman7]

Some players are finicky with BD-9/BD-5 discs(especially with Java?). My samsung was a pretty decent player for those, but it sucks with BD-R playback. Suffice to say, the LG BD640 replaced it :)

[kanerulz69]

Some players are finicky with BD-9/BD-5 discs(especially with Java?). My samsung was a pretty decent player for those, but it sucks with BD-R playback. Suffice to say, the LG BD640 replaced it :)

I have alot of movies that i have been converting with dvdfab, and then use bd rebuilder, but alot of the movies i have have a black sceen, it never does to the menu so i was going to try to use it to dvd5 to see if maybe it'll work but it still does the same I have an i7-3960x Extreme 3.3ghz 6-core w/ 64gb memory on an asus iv extreme motherboard and it takes about an 1hr 15minutes to shrink to a bd 25gb, is that about right or should i be able to do it faster? i haven't messed with the over clock settings

[omegaman7]

Encode times on blu-ray movies are highly variable. If a disc has 6hrs worth of video, it's gonna take some time. Typically, I see it range from 3 - 4hrs though. But yes, you have a very fast processor. Blu-ray encodes take time. We must be patient, until 16 - 24 core processors become available :S

[kanerulz69]

Encode times on blu-ray movies are highly variable. If a disc has 6hrs worth of video, it's gonna take some time. Typically, I see it range from 3 - 4hrs though. But yes, you have a very fast processor. Blu-ray encodes take time. We must be patient, until 16 - 24 core processors become available :S

well i'll surely have to upgrade when that arises, lol because its not that long of a wait, like my old pc i had to start it and go to sleep, when i got this new pc a couple weeks ago and built it, it was like jet speed compared to the dual core pc i had, guess patience is a virtue as they say

[AmigaFuture]

Patience is a virtue as they say

Have you ever questioned what that means? People have called me highly patient many times. I'm not "In a hurry to go nowhere fast."

It has nothing to do with moral or ethical values..as claimed by "virtue"..remove all that....and you're left with choice in every moment. Patience is the realization of the Now and creating the future in that Now which is constant.


Toy Story..I ripped it over my Network. I feel that had something to do with it..My Son and friends using that computer (I've done that before..so??)...or something else... I'm going to rip it again to my machine (local). I'll report again soon.

[JoeH]

Upon converting the original Blu-ray of "For Greater Glory" to DVD-5, some of the Spanish subtitles were invisible... maybe most of them. Others appear (maybe the shorter ones?). http://www.walmart.com/ip/21553994?findingMethod=rr

Unfortunately I deleted the conversion log, but it didn't report any errors. I can redo it if you need it. Here is a link to the subtitle file on SkyDrive. Let me know when you have it so I can delete it: http://sdrv.ms/SbcxJk

Edit: The conversion was done using v 0.41.01

[jdobbs]

LAVF detects all sources as 25 fps, so, if the Blu-ray contains a lot of 30 fps material the output will be over-sized. Hmmm... didn't know that. I'll go back and look at the code and see what I can do about that.

[jdobbs]

but how can i re-encode with 64 bit, the ffdshow in the link isn't 64 bit. The only way you can reencode at 64 bit is with LAVF. But you're not going to get any impressive increase in speed, so there really isn't a point to doing it.

[jdobbs]

An update about one of my issues.

I finally found the culprit and it could maybe help someone else in the future...

It had nothing to do with CPU, BD-RB config, FFDShow config or AFTEN config.

The error occurs ONLY if the destination folder has the "§" character in its name.
Exit the "§" in the destination folder's name and voilà, everything works fine.

I guess the presence of the character interferes with some part of the code used for audio re-encoding.

Issue was: Why in the world would you add that character to a pathname anyway? I'd say the chances are good that there are other special characters that might cause issues as well.

[jdobbs]

oke i use the recommed versions
But 64 bit ('Use X264's internal LAVF for decoding') belongs to work faster ? On a windows 7 64 bit.

I have a quad 9400 overclocked to 3.4 ghz have 4 gig memory

I have seen a bug, in the setup i have checked dutch subs on subtitellanguages to keep.
save changes. When i load a blu-ray, all the subtitels are not enabled. Why?
I must dubbelclick on the dutch subs in the window to enable. then i see a icon before the sub dutch. Click it where? You have to make the setting in the SETUP dialog.

[Edit] Never mind, I see you've found the answer (been gone for a week, and I'm catching up on posts)

[AmigaFuture]

Toy Story...Update: I decided to check with my Toy Story 2 disk also. I haven't watched them before with my current LG player, rather via PowerDVD 12. Everything looks good that way.

Does anyone else notice any menu jerking or audio "gaps" in the main menu before the choices menu displays with Toy Story and Toy Story 2 with your original Blu-ray and stand alone player?

I've also notice after using BD-RB 42.03 with Toy Story, between 17:30 to 17:55 into the movie a jerking and audio gap happens. This doesn't happen with the original Blu-ray.
With Toy Story 2 it happens between 4:25 and 4:40 also. There may be more instances...I haven't watched/listened much past that. The menu, I don't consider to be important, yet it could be effected for the same condition?

Anyone else noticing these things with their disks...or...discs?

I'm going to check with BD-9 next.

[jdobbs]

Toy Story...Update: I decided to check with my Toy Story 2 disk also. I haven't watched them before with my current LG player, rather via PowerDVD 12. Everything looks good that way.

Does anyone else notice any menu jerking or audio "gaps" in the main menu before the choices menu displays with Toy Story and Toy Story 2 with your original Blu-ray and stand alone player?

I've also notice after using BD-RB 42.03 with Toy Story, between 17:30 to 17:55 into the movie a jerking and audio gap happens. This doesn't happen with the original Blu-ray.
With Toy Story 2 it happens between 4:25 and 4:40 also. There may be more instances...I haven't watched/listened much past that. The menu, I don't consider to be important, yet it could be effected for the same condition?

Anyone else noticing these things with their disks...or...discs?

I'm going to check with BD-9 next. I've never had any issues with Toy Story. "Toy Story 3" however is a different matter and was a catalyst for several changes to BD-RB's handling of multipart sources.

[HWK]

Originally Posted by SquallMX
LAVF detects all sources as 25 fps, so, if the Blu-ray contains a lot of 30 fps material the output will be over-sized.

Hmmm... didn't know that. I'll go back and look at the code and see what I can do about that.

I can confirm this I was doing lord of the rings and it is changing framerate for all video files from 23.976 or 29.97 to 25 fps.

However at muxing stage BD-RB or other program changes back to 23.976. However I think encoded video is still done at 25 fps.

Simply put if you only look in video file which is created by x264 it will tell you frame rate is 25 fps.

[jdobbs]

I can confirm this I was doing lord of the rings and it is changing framerate for all video files from 23.976 or 29.97 to 25 fps.

However at muxing stage BD-RB or other program changes back to 23.976. However I think encoded video is still done at 25 fps.

Simply put if you only look in video file which is created by x264 it will tell you frame rate is 25 fps. The important distinction is that the buffering, etc. isn't correct. In the next release I will force the fps setting when LAVF is selected. But we have to remember -- this isn't a bug in BD-RB, it is a bug in LAVF. I'm just implementing a workaround.

Frankly I don't know why I'm supporting LAVF anyway -- or why anyone chooses to use it. I added it in the hope that it would mature to a point at which I could remove the requirement for AVISYNTH, HAALI, and FFDSHOW. But it never has. Even worse, since it doesn't support interlaced VC-1 I had to add code to automatically switch back to DirectShow mode anyway whenever it is detected. Now I have to implement another workaround.

[HWK]

Hmmm... didn't know that. I'll go back and look at the code and see what I can do about that.

Thanks Jdobbs for looking in to it. I have attached media info file which shows what happens in different phases to video file.

[HWK]

The important distinction is that the buffering, etc. isn't correct. In the next release I will force the fps setting when LAVF is selected. But we have to remember -- this isn't a bug in BD-RB, it is a bug in LAVF. I'm just implementing a workaround.

Frankly I don't know why I'm supporting LAVF anyway -- or why anyone chooses to use it. I added it in the hope that it would mature to a point at which I could remove the requirement for AVISYNTH, HAALI, and FFDSHOW. But it never has. Even worse, since it doesn't support interlaced VC-1 I had to add code to automatically switch back to DirectShow mode anyway whenever it is detected. Now I have to implement another workaround.

How about adding something similar to --fps 24000/1001 and it will force 24 fps on target. Just my two cents :D

[omegaman7]

Quite impressed with my 1090t. Ran a job on my 965 before install of the 1090t. (High Quality mode)

6hr23min(1090t)
7hr16min(965)
Shaved nearly an hour off. And the processor was NOT busting it's but on pass 1(50% average), or on the 720 x 480 special feature material. So if I were to put MULTIPROCESS=2 in the INI file, I'd likely see an improvement across the board. I just may to see the difference. I may also experiment more with DGDecNV.

[SquallMX]

Frankly I don't know why I'm supporting LAVF anyway -- or why anyone chooses to use it. I added it in the hope that it would mature to a point at which I could remove the requirement for AVISYNTH, HAALI, and FFDSHOW. But it never has. Even worse, since it doesn't support interlaced VC-1 I had to add code to automatically switch back to DirectShow mode anyway whenever it is detected. Now I have to implement another workaround.

Interlaced VC-1 is rare nowadays and LAVF is very useful if for some reason you can´t use the recommended FFDShow build, please continue supporting LAVF :(.

[AmigaFuture]

I've never had any issues with Toy Story. "Toy Story 3" however is a different matter and was a catalyst for several changes to BD-RB's handling of multipart sources.

Has BD-RB 42.03 been part of your recent tests with Toy Story; and have you checked the times I typed? Thank You. :)

[JoeH]

Upon converting the original Blu-ray of "For Greater Glory" to DVD-5, some of the Spanish subtitles were invisible... maybe most of them. Others appear (maybe the shorter ones?). http://www.walmart.com/ip/21553994?findingMethod=rr

Unfortunately I deleted the conversion log, but it didn't report any errors. I can redo it if you need it. Here is a link to the subtitle file on SkyDrive. Let me know when you have it so I can delete it: http://sdrv.ms/SbcxJk

Edit: The conversion was done using v 0.41.01

Bump.

[jdobbs]

Interlaced VC-1 is rare nowadays and LAVF is very useful if for some reason you can´t use the recommended FFDShow build, please continue supporting LAVF :(.Not as rare as you think. You just don't see it because BD-RB automatically adjusts and uses DirectShow.

[jdobbs]

Bump. Unfortunately with no log and no intermediate files to examine etc... I'm not sure of anything I can do to help unless I go out and buy it. And frankly, I'm not getting enough donations to cover the cost of the discs I've already bought -- let alone my time. It's all I can do to convince myself to spend my spare time on BD-RB. If it wasn't for "pride" I would have let this project go a long time ago.

[JoeH]

Totally understand, I just wanted to make sure you didn't miss it. I mentioned I would be glad to redo the log if you need to - just confirm (if what I say now doesn't clear it up). I posted the subtitle file. Is that not enough? Or would it be more helpful for me to cut a minute from a part of the video where it doesn't work and then post that, with video and subtitles?

I thought you were planning on charging for BD-RB eventually??

[AmigaFuture]

Hi. I thought since rerendering is producing choppy effects I'd have BD-RB do an MKV output.
[09/24/12] BD Rebuilder v0.42.03 (beta)
[14:45:29] Source: TOY_STORY_PLAYLIST_00150
- Input BD size: 19.48 GB
- Approximate total content: [01:21:04.901]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1920x1080, Intact Audio
- Decoding/Frame serving: DirectShow [4-way]
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[14:45:31] PHASE ONE, Encoding
- [14:45:31] Processing: VID_00066 (1 of 11)
- [14:45:31] Extracting A/V streams [VID_00066]
- [14:50:54] Reencoding video [VID_00066]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,931 frames
- Bitrate: 14,775 Kbs
- [14:50:54] Reencoding: VID_00066, Pass 1 of 2
- [14:51:30] Reencoding: VID_00066, Pass 2 of 2
- [14:52:06] Video Encode complete
- [14:52:06] Processing audio tracks
- [14:52:06] Processing: VID_00405 (2 of 11)
- [14:52:06] Extracting A/V streams [VID_00405]
- [14:52:18] Reencoding video [VID_00405]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,219 frames
- Bitrate: 12,841 Kbs
- [14:52:18] Reencoding: VID_00405, Pass 1 of 2
- [14:52:54] Reencoding: VID_00405, Pass 2 of 2
- [14:53:30] Video Encode complete
- [14:53:30] Processing: VID_00401 (3 of 11)
- [14:53:30] Extracting A/V streams [VID_00401]
- [14:54:25] Reencoding video [VID_00401]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 18,967 frames
- Bitrate: 12,764 Kbs
- [14:54:25] Reencoding: VID_00401, Pass 1 of 2
- [14:58:09] Reencoding: VID_00401, Pass 2 of 2
- [15:02:34] Video Encode complete
- [15:02:34] Processing: VID_00406 (4 of 11)
- [15:02:34] Extracting A/V streams [VID_00406]
- [15:02:39] Reencoding video [VID_00406]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 491 frames
- Bitrate: 12,722 Kbs
- [15:02:39] Reencoding: VID_00406, Pass 1 of 2
- [15:02:46] Reencoding: VID_00406, Pass 2 of 2
- [15:02:52] Video Encode complete
- [15:02:52] Processing: VID_00402 (5 of 11)
- [15:02:52] Extracting A/V streams [VID_00402]
- [15:03:34] Reencoding video [VID_00402]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 12,673 frames
- Bitrate: 12,790 Kbs
- [15:03:34] Reencoding: VID_00402, Pass 1 of 2
- [15:06:05] Reencoding: VID_00402, Pass 2 of 2
- [15:08:59] Video Encode complete
- [15:08:59] Processing: VID_00407 (6 of 11)
- [15:08:59] Extracting A/V streams [VID_00407]
- [15:09:05] Reencoding video [VID_00407]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 452 frames
- Bitrate: 12,666 Kbs
- [15:09:05] Reencoding: VID_00407, Pass 1 of 2
- [15:09:11] Reencoding: VID_00407, Pass 2 of 2
- [15:09:17] Video Encode complete
- [15:09:17] Processing: VID_00403 (7 of 11)
- [15:09:17] Extracting A/V streams [VID_00403]
- [15:10:20] Reencoding video [VID_00403]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 28,247 frames
- Bitrate: 12,879 Kbs
- [15:10:20] Reencoding: VID_00403, Pass 1 of 2
- [15:17:44] Reencoding: VID_00403, Pass 2 of 2
- [15:24:24] Video Encode complete
- [15:24:24] Processing: VID_00408 (8 of 11)
- [15:24:24] Extracting A/V streams [VID_00408]
- [15:24:30] Reencoding video [VID_00408]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,218 frames
- Bitrate: 13,099 Kbs
- [15:24:30] Reencoding: VID_00408, Pass 1 of 2
- [15:24:45] Reencoding: VID_00408, Pass 2 of 2
- [15:25:02] Video Encode complete
- [15:25:02] Processing: VID_00404 (9 of 11)
- [15:25:02] Extracting A/V streams [VID_00404]
- [15:26:32] Reencoding video [VID_00404]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 42,735 frames
- Bitrate: 12,753 Kbs
- [15:26:32] Reencoding: VID_00404, Pass 1 of 2
- [15:37:44] Reencoding: VID_00404, Pass 2 of 2
- [15:47:38] Video Encode complete
- [15:47:38] Processing: VID_00409 (10 of 11)
- [15:47:38] Extracting A/V streams [VID_00409]
- [15:47:56] Reencoding video [VID_00409]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5,107 frames
- Bitrate: 12,733 Kbs
- [15:47:56] Reencoding: VID_00409, Pass 1 of 2
- [15:48:46] Reencoding: VID_00409, Pass 2 of 2
- [15:49:39] Video Encode complete
- [15:49:39] Processing: VID_00410 (11 of 11)
- [15:49:39] Extracting A/V streams [VID_00410]
- [15:49:45] Reencoding video [VID_00410]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 601 frames
- Bitrate: 15,156 Kbs
- [15:49:45] Reencoding: VID_00410, Pass 1 of 2
- [15:49:52] Reencoding: VID_00410, Pass 2 of 2
- [15:50:01] Video Encode complete
[15:50:01]PHASE ONE complete
[15:50:01]PHASE TWO - Rebuild Started
- [15:50:01] Building ALTERNATE OUTPUT Structure
- ERROR in attempt to mux (MKVMERGE)
[15:52:52] - Failed to REBUILD
My HDD has 53GB free, so plenty of space where the Working directory is.

[RobertM]

My HDD has 53GB free, so plenty of space where the Working directory is.

53GB is NOT plenty. During the rebuilding process there will be more than 1 copy in existence on your HDD; the original, the extract files, the re-encode, and the rebuild. The intermediate steps (extract and re-encode) are usually deleted after the subsequent step, but you do need extra HDD space for the interim processes.

[wakko709]

--------------------
[09/24/12] BD Rebuilder v0.42.03 (beta)
[18:58:33] Source: JOHN_CARTER
- Input BD size: 43.91 GB
- Approximate total content: [03:32:33.240]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[18:58:35] PHASE ONE, Encoding
- [18:58:35] Processing: VID_00252 (1 of 31)
- [18:58:35] Extracting A/V streams [VID_00252]
- Error in attempt to extract audio/subs.
- Can't create output file E:\WORKFILES\00252.track_4113.264
[18:58:40] - Failed to retrieve audio, aborted
plus ive installed all the latest software

[setarip_old]

@wakko79

Hi! ive installed all the latest softwareYou MUST install the SPECIFIC software and software versions that are listed in Post #1 of this thread.

[wakko709]

@wakko79

Hi! You MUST install the SPECIFIC software and software versions that are listed in Post #1 of this thread.

ive installed the versions recomended!

[wakko709]

- Windows Version: 6.1 [7600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set incorrectly: [0]
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.42.0.3, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

[AmigaFuture]

53GB is NOT plenty. During the rebuilding process there will be more than 1 copy in existence on your HDD; the original, the extract files, the re-encode, and the rebuild. The intermediate steps (extract and re-encode) are usually deleted after the subsequent step, but you do need extra HDD space for the interim processes.

Hi. I get the structure of the NT FileSystem (NTFS) and it'll show as 0 or something resembling that if there isn't any "Storage Space" free somewhere in the process. I appreciate your analysis, thank You. :D
53GB wasn't the start of the amount, that's the left over free space. At the start it was about twice that. :D

[Wizzu]

Why in the world would you add that character to a pathname anyway?This question is entirely irrelevant (a little as if you were asking about the color of one's underwear :D) but since you ask I'll reply anyway.

Many power users use such special characters to get a coherent folder structure that doesn't rely on mere alphabetical sorting. They are very useful, for instance, to create visual groups of folders in the explorer.

Anyway, these characters exist, using them is entirely legitimate whatever the reason to do so. They should, as such, be taken in consideration by programmers.

Don't take me wrong: I'm not complaining at all, since rebuilder is free, is very helpful to me and you're definitly doing a great job. Besides, I'm not even sure that the problem doesn't lie with AFTEN rather than with your work.

I simply created a root folder entirely dedicated to BDRB output, really no big deal to break my habits for a free program that does so much right.

I think it's nonetheless important that you are aware of the glitch caused by this. Now what you do with the info is entirely up to you. :)

[Groucho2004]

This question is entirely irrelevant (a little as if you were asking about the color of one's underwear :D) but since you ask I'll reply anyway.

Many power users use such special characters to get a coherent folder structure that doesn't rely on mere alphabetical sorting. They are very useful, for instance, to create visual groups of folders in the explorer.

Anyway, these characters exist, using them is entirely legitimate whatever the reason to do so. They should, as such, be taken in consideration by programmers.

Don't take me wrong: I'm not complaining at all, since rebuilder is free, is very helpful to me and you're definitly doing a great job. Besides, I'm not even sure that the problem doesn't lie with AFTEN rather than with your work.

I simply created a root folder entirely dedicated to BDRB output, really no big deal to break my habits for a free program that does so much right.

I think it's nonetheless important that you are aware of the glitch caused by this. Now what you do with the info is entirely up to you. :)

It is a valid character for file/path names but remember that its value is outside of the US-ASCII range (00h - 7Fh). So, if you cut and paste something (a command line with notepad for example), the necessary ANSI-OEM conversion does not take place. Aften has no problem with this character by the way.
I also use special characters to get file/folder sorting to my liking but I stick to characters in the ASCII range, like "_", "#", "$", etc.

[Wizzu]

It is a valid character for file/path names but remember that its value is outside of the US-ASCII range (00h - 7Fh). So, if you cut and paste something (a command line with notepad for example), the necessary ANSI-OEM conversion does not take place. Aften has no problem with this character by the way.
I also use special characters to get file/folder sorting to my liking but I stick to characters in the ASCII range, like "_", "#", "$", etc.
Thanks for the info. :cool:
I had no idea that "§ " was outside the range, unlike "$" and "#"... learning something everyday.

[Wizzu]

Don't take me wrong: I'm not complaining at all, since rebuilder is free, is very helpful to me and you're definitly doing a great job. And while at it I just made a second donation. :thanks:

I'm encouraging all BDRB users to donate BTW. :)

[wakko709]

- Windows Version: 6.1 [7600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.42.0.3, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
i know win 7 isnt set correcily how do i change it?

[sytyguy]

After the install of FFDSHOW , run "Video Decoder Configuration" for FFDSHOW from the "START/Programs" menu, and make sure MPEG2 decoding is enabled. Do the same using "Audio Decoder Configuration" to ensure "Uncompressed" is set to "All Supported". See if that helps.

BTW, this is on the first page of this thread.

[Wizzu]

- Windows Version: 6.1 [7600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.42.0.3, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
i know win 7 isnt set correcily how do i change it?

From the configuration instructions in the first post:
- run "Video Decoder Configuration" for FFDSHOW from the "START/Programs" menu, and make sure MPEG2 decoding is enabled.
- Do the same using "Audio Decoder Configuration" to ensure "Uncompressed" is set to "All Supported".

Did you do that?

*EDIT* Didn't notice that sytyguy beat me to it :D

[Ch3vr0n]

on W7 you need to run the bdrb.exe with admin rights the first time (or atleast once) so that it can correctly set the codecs if it doesnt work completely via the instructions in the first post

[wakko709]

i ran it in administarator
still i get
- Windows Version: 6.1 [7600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.42.0.3, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
----------------------
[09/25/12] BD Rebuilder v0.42.03 (beta)
[13:18:49] Source: JOHN_CARTER
- Input BD size: 43.91 GB
- Approximate total content: [03:32:33.240]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:18:51] PHASE ONE, Encoding
- [13:18:51] Processing: VID_00252 (1 of 31)
- [13:18:51] Extracting A/V streams [VID_00252]
- Error in attempt to extract audio/subs.
-
[13:23:04] - Failed to retrieve audio, aborted

[RobertM]

i ran it in administarator
still i get
<snip>
- WIN7 preferred MPEG2 CODEC: Not Set correctly
<snip>


But did you run the FFDSHOW video configuration program? Several people have advised you to do so.

[wakko709]

yes i did!

[Paddy97]

From changelog

- Changed MKV output so no PGS subtitle is selected
by default at playback.

Is there any hidden option that I can use to revert this behaviour? It's troublesome for my kids to select subtitle since my mediaplayer does not select automatically.

Today I have to remux the MKV to set the default PGS.

[RiotRay]

Hi!

I'm trying to recode "Sarah Connor Chronicles Season 2" to BD25. BDRebuilder has a very strange behaviour here. It doesn't give back any error messages, but recoding the VC1 Videos takes place at approximately 1 FPS. This way it takes forever! I already tried DVDfab, which gives me an error message with these discs at 50% recoding.
I think it should be much faster, since my system does with h264 material (AMD Phenom II X6 1090t).

What's the problem here?

thx

[gonca]

Are you encoding from hard drive or optical disc?

[RiotRay]

I'm encoding from harddrive.

[omegaman7]

I'm encoding from harddrive.

A faulty cable, or faulty hard drive COULD behave like that. I must admit though, that has to be highly rare...
Though faulty Sata cables can cause drop outs, and bandwidth issues. A bad southbridge could probably cause that too. Also rare. I'd be for testing the crap out of the hard drive, via other applications.

[RiotRay]

I'm a USB3.0 dock for target and an external USB2.0 for the source material. It all goes over the same USB3.0 root hub. I never experienced this before with other discs. I guess, I just have to keep trying until I find the reason..

thx

[gonca]

Post your log and .ini files. There might be a clue there. Also try hdtune to test your hard drives. Ist it possible your hub is the issue?

[AmigaFuture]

Hi!

I'm trying to recode "Sarah Connor Chronicles Season 2" to BD25. BDRebuilder has a very strange behaviour here. It doesn't give back any error messages, but recoding the VC1 Videos takes place at approximately 1 FPS. This way it takes forever! I already tried DVDfab, which gives me an error message with these discs at 50% recoding.
I think it should be much faster, since my system does with h264 material (AMD Phenom II X6 1090t).

Today's computers won't process something forever..the fact you're noticing movents indicating that. :D

If you're noticing movement, even the smallest amount, then make sure your cables and hardware are functioning fine. Also, if another Blu-ray rips fine and encode fine, check your hard drives file system (Windows XP and 7 have good built in checking), check the surface of the HDD. If there's a "read error" or a sector failing that can be part of "very slow data movement" as the drive tries to read "through" the corruption. These are possibilities without being there examining it. :D

[omegaman7]

RiotRay. Try a linear Read of the hard drive in question. That should eliminate a read/sector issue. Everest can do the job. Never used Hdtune.

[AmigaFuture]

Toy Story: I have 3 machines here. 1 I use as storage and Firefox, and my Son uses for Homework and games. No extra codecs are installed. Very stock Windows 7. Toy Story has the same "glitches" using that machine when I have BD-RB reencode Full Backup and no editing. Everything shows as rendered fine, except for playback in Standalone unit. I've tried BD-RE-DL and BD-R, same results for both. I had it output to Alternative movie only MKV, mkvmerge fails to finish. 2) I've checked my main system, which I'm using now, checked all connections...verified the HDDs are fine, RAM is good...everything is cooled so no overheating. I've removed all software, including AnyDVD, reset, made sure all lingering bits were removed. Reset. Then reinstalled.

I'm now wondering if it has to do with AnyDVD? Now I'm checking with some other movies. I may check with older versions of AnyDVD to see if a bug for introduced somewhere. 7.0.8.0 in use.

Anyone else have the movie and noticing these things at the times I've stated in recent previous posts? Thanks.

[omegaman7]

The first toy story, or the third one? I've been meaning to do all of them come to think of it :S

[AmigaFuture]

The first toy story, or the third one? I've been meaning to do all of them come to think of it :S

Something about me.. If I'd meant Toy Story 2 or 3 I'd gave typed that. :D Or edited my post upon noticing unclear info.

BD-RB was able to reencode my Toy Story to BD-9 before, but I now recall from there I made an MKV myself AND I didn't watch it completely after it was done. I meant to.

Since you have them, try the first one...erm, hehe...Toy Story (Original) and check those times I posted, please. Very interesting that my 3 machines render fine, and yet the exact same "jerky" flaw at the same times each time. The Burner is good, the disks are good.. A bug?

I checked the directory and notice the large files that make the movie. It's broken into a few chunks. Which explains why I can hear the BD player's optics moving to access them. Seems in the rebuild process that...they're not being connected "?cleanly?".. Hmm..

[omegaman7]

I saw you mention both the third and first one in past posts. THat's why I was uncertain ;) I'll let you know as soon as I can. Busy weekend, and busy next week. Work work work... :( But... $$$

-Edit-

Found your post.
http://forum.doom9.org/showpost.php?p=1592504&postcount=15836

Jdobbs apparently didn't have a problem with that one. Perhaps a bad rip. I've had rips that play on the pc fine, other players fine, but when re-processed, $h!t hits the fan. Copy of a copy of a copy I guess...

[jdobbs]

I saw you mention both the third and first one in past posts. THat's why I was uncertain ;) I'll let you know as soon as I can. Busy weekend, and busy next week. Work work work... :( But... $$$

-Edit-

Found your post.
http://forum.doom9.org/showpost.php?p=1592504&postcount=15836

Jdobbs apparently didn't have a problem with that one. Perhaps a bad rip. I've had rips that play on the pc fine, other players fine, but when re-processed, $h!t hits the fan. Copy of a copy of a copy I guess... I did Toy Story with no issues, but that was a long time ago. It's possible something could have been introduced that causes problems -- but not probable. I'll go back an reencode to see how it comes out just to be sure.

[AmigaFuture]

omegaman7: When you take the "work" out of a job it goes much better in many ways. :)

I noticed something interesting. I ripped Toy Story again with AnyDVD 7.0.8.0 as an ISO instead of files in a directory. I then burned it to a BD DL...the the movie played smooth in the times I noted before. I checked it a few times; ejecting the disk and reinserting it...rewinding and playing.. I'm going to mount the image and have BD-RB 42.03 rebuilt the image and check that. Looks like AnyDVD Is the cause..

I always check both ways, program and standalone.

Update: Using Movie and Menus, I set FORCE_NOENCODE=1 and the output at the "jerky" video and audio. Now doing using the High Speed option with Movie and Menus. Next, if same output, I'll use Full Backup.

[AmigaFuture]

No blanking was used.

[09/29/12] BD Rebuilder v0.42.03 (beta)
[20:39:00] Source: TOY_STORY
- Input BD size: 24.80 GB
- Approximate total content: [05:48:14.789]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE and MENUS mode enabled
- Quality: High-Speed Option (BD-25), Two Pass
- Decoding/Frame serving: DirectShow [4-way]
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[20:39:00] PHASE ONE, Encoding
[Edited to fit to post..Processed fine]
- [22:54:42] Multiplexing M2TS
- [22:54:59] Blanking: VID_00514 (134 of 147)
- [22:54:59] Blanking: VID_00515 (135 of 147)
- [22:54:59] Blanking: VID_00516 (136 of 147)
- [22:54:59] Blanking: VID_00517 (137 of 147)
- [22:54:59] Blanking: VID_00518 (138 of 147)
- [22:54:59] Blanking: VID_00520 (139 of 147)
- [22:54:59] Blanking: VID_00522 (140 of 147)
- [22:54:59] Blanking: VID_00535 (141 of 147)
- [22:54:59] Blanking: VID_00536 (142 of 147)
- [22:54:59] Blanking: VID_00537 (143 of 147)
- [22:54:59] Processing: VID_00538 (144 of 147)
- [22:54:59] Extracting A/V streams [VID_00538]
- [22:55:05] Reencoding video [VID_00538]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 566 frames
- Bitrate: 34,898 Kbs
- [22:55:05] Reencoding: VID_00538, Pass 1 of 2
- [22:55:05] Reencoding: VID_00538, Pass 2 of 2
- [22:55:14] Video Encode complete
- [22:55:14] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Reencoding audio to AC3...
- Track 4354 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- [22:55:18] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00538.meta
-
[22:55:24] - Failed to build structure, aborted


Now BD-RB is attempting Full Backup.. No blanking.

[Scorpio1]

OS Windows 7 x64 Pro.

I have discovered that if the font size is set to 125% in personalization/make text easier to read (acsessed by right clicking the desktop and selecting personalization), that when BD Rebuilder completes a job the progress bars are stuck at about 80%, the progress does state 100% however. This gets worse if 150% is selected and the progress bars seem stuck at about 60%.

Just a minor cosmetic bug really.

Any idea when the full version will be released, the program is excellent and must be very near a stable version by now, I have used BDR for over 2 years and never had a serious problem, apart from 1 weird error message many versions ago.

[Scorpio1]

I have noticed you get this behaviour if you copy the new version of BD Rebuilder over the old one, you need to completely delete the old version first, then put the new version in the directory (folder), this works for me, I get exactly the same error as you if I copy the new one over the old one. Hope that makes sense to you.

[dfsooner]

I have noticed you get this behaviour if you copy the new version of BD Rebuilder over the old one, you need to completely delete the old version first, then put the new version in the directory (folder), this works for me, I get exactly the same error as you if I copy the new one over the old one. Hope that makes sense to you.

I always copy the new over the old, but I'm careful to make sure ALL files and folders in the new version replace their predecessors. I don't remember ever having a problem that resulted from that practice.

[AmigaFuture]

I use BD-RB from the Desktop, and once I confirm the contents are the same (Giggling at jdobbs for a moment), I then extract the archive replacing the older. Then I move the archive to an archival directory until no longer needed. There should not be a challenge with replacing the older files unless a program/directory are "locked" from being used in some way. I've never deleted the older files or directories first; if the system is functioning correctly with respect to updating, it'll go smooth.

[abbadon]

When using the new "Import" feature, and subsequently fully processing, will a video be "uncropped" to restore the compliant resolution (by adding black boarders) if necessary, or simply vertically stretched?

[omegaman7]

When using the new "Import" feature, and subsequently fully processing, will a video be "uncropped" to restore the compliant resolution (by adding black boarders) if necessary, or simply vertically stretched?

I ran a cropped video recently. Clearly black borders were added in. It came out perfectly :)

[abbadon]

hmmm, that's what I figured was SUPPOSED to happen, but for some reason I keep getting stretch video instead of borders . It's just import and process, right? No extra/hidden options? I'm sure I'm missing something...

[jdobbs]

When using the new "Import" feature, and subsequently fully processing, will a video be "uncropped" to restore the compliant resolution (by adding black boarders) if necessary, or simply vertically stretched?Borders are added to make it compliant. But it isn't done during the import, it is done when processing the imported source. If you look in the BDMV/STREAM folder of the import (the pseudo-BD source) you'll see a file with the extension .ADJ. This holds any adjustments that needs to be made to the source. It is a text file and is made up of AVISYNTH functions (like AddBorders()).

[CanuckGod]

Just noticed that the newest BD Rebuilder (0.42.03) seems not to process what I have selected to blank or not to blank in Edit Mode when I save it in a batch queue; the BLANKED variable seems to have the correct 1's and 0's for what I'm editing, but BD Rebuilder uses the default auto-selected streams instead. Normal 'non-batch' mode works fine, however; wonder if anyone else has this problem or not.

[soneca]

Hi Jdobbs,

How to properly process this unusual title (http://www.imdb.com/title/tt0120245/)?

Bd Rebuilder does not accept the inclusion of the line "--bff".

[09/28/12] BD Rebuilder v0.42.03 (beta)
[11:02:17] Source: SUPER_SPEEDWAY_PLAYLIST_00000
- Input BD size: 12,45 GB
- Approximate total content: [00:49:41.978]
- Target BD size: 4,38 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: Better (Faster), Two Pass
- X264 Tweak(s) enabled
- Decoding/Frame serving: DGDecNV [2-way]
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=448
- Subtitle [1] is defaulted ON.
[11:02:20] PHASE ONE, Encoding
- [11:02:20] Processing: VID_00000 (1 of 1)
- [11:02:20] Extracting A/V streams [VID_00000]
- [11:05:03] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 29,970fps, 89.370 frames
- Bitrate: 11.189 Kbs
- [11:05:03] Reencoding: VID_00000, Pass 1 of 2
- [11:26:05] Reencoding: VID_00000, Pass 2 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.42.03 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: Isn't recommended version
- FFDSHOW: 4422, not recommended version
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

General
ID : 0 (0x0)
Complete name : D:\BLU_RAY\SUPER_SPEEDWAY\BDMV\STREAM\00000.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 12.5 GiB
Duration : 49mn 42s
Overall bit rate mode : Variable
Overall bit rate : 35.9 Mbps
Maximum Overall bit rate : 48.0 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=3, N=18
Codec ID : 27
Duration : 49mn 41s
Bit rate mode : Variable
Bit rate : 31.4 Mbps
Maximum bit rate : 35.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Bottom Field First
Bits/(Pixel*Frame) : 0.505
Stream size : 10.9 GiB (87%)
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : MA / Core
Muxing mode : Stream extension
Codec ID : 134
Duration : 49mn 41s
Bit rate mode : Variable
Bit rate : 1 765 Kbps / 1 510 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Compression mode : Lossless / Lossy

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 49mn 41s
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 228 MiB (2%)

Audio #3
ID : 4354 (0x1102)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 49mn 41s
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 228 MiB (2%)

Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

[jdobbs]

Bd Rebuilder does not accept the inclusion of the line "--bff" When, where, how? What makes you think that is the issue? I notice that the first pass completed successfully -- and it also would use the "--bff" parameter.

Just a reminder... I don't accept bug reports that don't use the recommended versions of the helper software.

[soneca]

:scared: Ok, I'll do some more tests and figure out what's going on.:D

It is difficult to harmonize the only software that I always use.
:devil:BD Rebuilder vs. RipBot264:devil:
As I recall, I never had problems because of that.
But it can happen...:eek:

[abbadon]

I figured it out. there is a conflict with the MULTIPROCESS option

my config had MULTIPROCESS=1 but once removed no problem. tried changing it to 2 but no luck

separate, unless the source is oversized or FORCE_ENCODE is used, it doesn't process

[AmigaFuture]

abbandon: If things fail in any way...Disable MULTIPROCESS and go from there. :D Once okay, try MP. It's usually fine left active for most movies.


Jdobbs: Any news with Toy Story?

After it's done re-rendering here and rebuilding, I discovered if I click Backup again, it rebuilds shows a longer list of rebuilding text. I'll include logs if you like.

[setarip_old]

@soneca

Did you notice the following?: - HAALI Splitter: Isn't recommended version
- FFDSHOW: 4422, not recommended version

[soneca]

Yes, it is easy to solve the issue of Haali Splitter installing the recommended version, but RipBot requires a newer version of ffdshow.

[mercadonegro]

when I want to compress a 25GB Blu Ray. I choose not to keep the original audio. I want to convert or re-encode AC3, I always had errors. Why?.

[10/02/12] BD Rebuilder v0.42.03 (beta)
[11:05:30] Source: SACCO_E_VANZETTI_-_1971
- Input BD size: 30,36 GB
- Approximate total content: [03:08:32.946]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
- Resuming from previously started job.
[11:05:31] PHASE ONE, Encoding
- [11:05:31] Processing: VID_00006 (1 of 6)
- [11:05:31] Reencoding video [VID_00006]
- Source Video: MPEG-2, 720x576
- Rate/Length: 25,000fps, 3.622 frames
- [11:05:31] Reencoding: VID_00006, Pass 1 of 1
- [11:05:52] Video Encode complete
- [11:05:52] Processing audio tracks
- Track 4352 (ita): Keeping original audio
- [11:05:52] Multiplexing M2TS
- [11:05:56] Processing: VID_00005 (2 of 6)
- [11:05:56] Extracting A/V streams [VID_00005]
- [11:06:03] Reencoding video [VID_00005]
- Source Video: MPEG-2, 720x576
- Rate/Length: 25,000fps, 5.317 frames
- [11:06:03] Reencoding: VID_00005, Pass 1 of 1
- [11:06:38] Video Encode complete
- [11:06:38] Processing audio tracks
- [11:06:38] Multiplexing M2TS
- [11:06:45] Processing: VID_00003 (3 of 6)
- [11:06:45] Extracting A/V streams [VID_00003]
- [11:06:53] Reencoding video [VID_00003]
- Source Video: MPEG-2, 720x576
- Rate/Length: 25,000fps, 6.480 frames
- [11:06:53] Reencoding: VID_00003, Pass 1 of 1
- [11:07:33] Video Encode complete
- [11:07:33] Processing audio tracks
- Track 4352 (ita): Keeping original audio
- [11:07:33] Multiplexing M2TS
- [11:07:38] Processing: VID_00007 (4 of 6)
- [11:07:38] Extracting A/V streams [VID_00007]
- [11:07:46] Reencoding video [VID_00007]
- Source Video: MPEG-2, 720x576
- Rate/Length: 25,000fps, 6.724 frames
- [11:07:46] Reencoding: VID_00007, Pass 1 of 1
- [11:08:28] Video Encode complete
- [11:08:28] Processing audio tracks
- [11:08:28] Multiplexing M2TS
- [11:08:34] Processing: VID_00002 (5 of 6)
- [11:08:34] Extracting A/V streams [VID_00002]
- [11:09:29] Reencoding video [VID_00002]
- Source Video: MPEG-2, 720x576
- Rate/Length: 25,000fps, 63.661 frames
- [11:09:29] Reencoding: VID_00002, Pass 1 of 1
- [11:15:43] Video Encode complete
- [11:15:43] Processing audio tracks
- Track 4352 (ita): Keeping original audio
- [11:15:44] Multiplexing M2TS
- [11:16:30] Processing: VID_00000 (6 of 6)
- [11:16:30] Extracting A/V streams [VID_00000]
- [11:31:43] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 24,000fps, 179.583 frames
- Bitrate: 20.599 Kbs
- [11:31:44] Reencoding: VID_00000, Pass 1 of 2
- [14:17:20] Reencoding: VID_00000, Pass 2 of 2
- [00:37:45] Video Encode complete
- [00:37:46] Processing audio tracks
- Track 4352 (ita): Reencoding audio to AC3...
- [00:37:46] Processing audio tracks
- Track 4352 (ita): Reencoding audio to AC3...
- [00:37:46] ReencodeAudio() 00070 1801
[02:27:33] - Failed to reencode audio, aborted

help me please!

[Ch3vr0n]

Run inspect.executive from inside the bdrb folder and post the results. That kind of behaviour typically indicates something wrong with the helper aps

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[jdobbs]

@mercadonegro

Error 00070 is "Permission Denied" -- you have a permissions issue with either the application or the folder where it is attempting to write.

I'd right-click on the files AFTEN.EXE and WAVI.EXE in the BD-RB tools folder and see if there is some rights issue against one of them.

[jwjohnson]

mercadonegro

Do you have BD-RB installed in the Program Files or the Program Files (x86) folders?

Windows 7 doesn't always play nice with BD-RB if you put it there.

[Ch3vr0n]

there are no issues with running any program like BDRB or another in the program files. I do, well not if u disable that stupid UAC like i did. Thats one of the first things i do after a windows install.

[omegaman7]

there are no issues with running any program like BDRB or another in the program files. I do, well not if u disable that stupid UAC like i did. Thats one of the first things i do after a windows install.

Me too. Pesky function In my opinion.

[abbadon]

any plan to make MULTIPROCESS work with IMPORT ? with my current Phenom II x4 940 it makes a 20% difference. I was planning on purchaching a 6 core Intel after extensive testing on such a machine, but my testing showed MULTIPROCESS gave an even greater boost from MULTIPROCESS (ca. 40%). Granted, I see myself doing VERY few imports, but is this conflict considered a bug-to-be-fixed ? or is there a manual workaround you can suggest?

[soneca]

jdobbs,

All programs installed correctly, the windows registry was changed to allow me to use the revision(3882) of ffdshow with BD Rebuilder and RipBot264.
So it appears the 9999.

http://i131.photobucket.com/albums/p305/soneca1/Forum/BD-1.jpg

This time the conversion was completed but the BD Rebuilder is detecting bff as tff.
Bd Rebuilder should detect the correct order of the dominant field or the inclusion of the parameter "--bff" is always necessary?
I made another conversion including this parameter, and the video was processed correctly.

TWEAK_PASS_ONE=--tune film --bff
TWEAK_PASS_TWO=--tune film --bff

[mercadonegro]

mercadonegro

Do you have BD-RB installed in the Program Files or the Program Files (x86) folders?

Windows 7 doesn't always play nice with BD-RB if you put it there.

Hello jwjohnson
BD-RB I have not installed in the Program Files or Program Files (x86)
I have it installed on another hard drive.
E: \ Mercadonegro \ in process \ Compression \ BD_Rebuilder
But when I choose to keep the DTS audio, I have no problem ...

[mercadonegro]

@mercadonegro

Error 00070 is "Permission Denied" -- you have a permissions issue with either the application or the folder where it is attempting to write.

I'd right-click on the files AFTEN.EXE and WAVI.EXE in the BD-RB tools folder and see if there is some rights issue against one of them.

Hi jdobbs

OK. I right click on AFTEN.EXE and WAVI.EXE, on the Details tab, but no rights issue
My English is not good. Apologies.

[jdobbs]

Hi jdobbs

OK. I right click on AFTEN.EXE and WAVI.EXE, on the Details tab, but no rights issue
My English is not good. Apologies. The conversion is run as a batch job (in order to redirect the output of WAVI into AFTEN). So that might be another place to look. Unfortunately this is definitely a rights/privilege issue, which is specific to your system. It's tough to debug one of those on a forum, there are lots of possibilities.

[aneurysm]

hi,
this is not a bug .. but something I haven't found yet.
is there an option to select to which language audio or subs are changed ?
for instance .. a disc with 20 different subs. I have standard selected to keep ENG & DUT subs.
After the rebuild, all the subs that are gone are replaced by ENG (So I have 19 ENG subs & 1 DUT sub). But what if I would like them to all be replaced by DUT (19 DUT subs & 1 ENG sub)?

tnx in advance

[jdobbs]

hi,
this is not a bug .. but something I haven't found yet.
is there an option to select to which language audio or subs are changed ?
for instance .. a disc with 20 different subs. I have standard selected to keep ENG & DUT subs.
After the rebuild, all the subs that are gone are replaced by ENG (So I have 19 ENG subs & 1 DUT sub). But what if I would like them to all be replaced by DUT (19 DUT subs & 1 ENG sub)?

tnx in advance Currently the languages that are not kept are modified to point to the first of the languages that are. So if ENG is first on the list of selected languages, the track id for all the removed languages are changed to point to ENG. If the first was DUT, then they'd point to DUT. I could probably add a hidden parameter that gives precedence to some other language.

[aneurysm]

Currently the languages that are not kept point are modified to point to the first of the languages that are. So if ENG is first on the list of selected languages, the track id for all the removed languages are changed to point to ENG. If the first was DUT, then they'd point to DUT. I could probably add a hidden parameter that gives precedence to some other language.

ok that explains. ENG is indeed usually first. If ya ever have time to put that in a hidden options would be cool.

[AmigaFuture]

Toy Story 1 (and 2): I removed AnyDVD and installed an older version 6.7.6.0..and noticed a difference in handling this disk with most recent releases; with respect to the ripping to HDD vs ISO. BD-RB is unable to create a backup of Toy Story without A/V "jerkiness" with my machines, even the almost completely stock Windows 7. Installed games, Firefox and Crome are the only things keeping it from being stock Windows 7. BD-RB does render a good MKV as an alternate output. I read a little more about "linking" which is why 3D Blu-ray disks are to be ripped as ISO. Toy Story isn't 3D, but I wonder if BD-RB isn't "linking" the segments correctly!? Just pondering... Thanks for reading.

Until something changes with BD-RB or some other clue is noticed, I'm out of ideas. :D

[Adbear]

The reason 3D discs need to be ripped as ISO's is so the right eye doesn't get unpacked and make it to big to fit back onto a disc, this is not the same as seamless branching that you get on 2D discs

[AmigaFuture]

Adbear: I was reading about that on the SlySoft forums when someone else talked about it. Now I get "Why" without all the details. Okay, I'll change it to seamless branching..perhaps that's what's happening with Toy Story 1 and 2 here with BD-RB. I'm not sure. Seems odd to me to call it "the right eye" when it's not an actual "Eye"...but only data for it. Ah, well. Hehe. I appreciate your reply, thanks.

[sytyguy]

So does that mean one can rip a 3D movie with BD-RB if it is ripped as an ISO???

[jdobbs]

Adbear: I was reading about that on the SlySoft forums when someone else talked about it. Now I get "Why" without all the details. Okay, I'll change it to seamless branching..perhaps that's what's happening with Toy Story 1 and 2 here with BD-RB. I'm not sure. Seems odd to me to call it "the right eye" when it's not an actual "Eye"...but only data for it. Ah, well. Hehe. I appreciate your reply, thanks. That doesn't explain why it worked correctly for hundreds of others -- including myself.

Here's what I'd like to happen. I want you to run "Toy Story" again -- then , without changing anything, I'd like you to copy the config/ini file contents and send them to me (dvd-rb@dvd-rb.com). I will load your settings and run "Toy Story" one more time. If I can repeat your issue -- I'll get it fixed. If it runs correctly for me, then I'll just have to tell you that the problem is on your end and be done with it.

[Ch3vr0n]

So does that mean one can rip a 3D movie with BD-RB if it is ripped as an ISO???

Yes and no. BDRB will be able to produce a 2D only backup disc provided the disc containts both a 2D & 3D version on the same disc. BDRB simply ignores the SSIF folder and processes the rest. If it is a 3D only disc, then no BDRB can't handle it. The only way to backup a 3D disc and retain full functionality like the original is 1:1

[sytyguy]

I know the documentation indicates it cannot, but "Adbear" mentioned, "3D discs need to be ripped as ISO's", so I thought something had changed.

Thanks for the reply.

[drmih]

If a 3D disc is ripped to a folder the size is effectively twice the size on disc. Therefore it makes sense to rip to an iso for storage. The only software that can currently create a bd-25 iso of a 3D disc with everything cloned is dvdfab.

[Ch3vr0n]

euhm you're wrong on that part. DVDCrap can shrink BD3D to BD25 as much as i'm santa. it can't, it does the same thing BDRB does. Ignore the SSIF folder, but keeps the menu intact. Result BD25 disc on which the 3D stream doesnt work.

[drmih]

Just do your homework. I have version 8.2.1.2 and it works on my discs - I've backed up 30 or so of my discs and the copies are full 3D copies on bd-25. The stupid thing about the software is that the option lets you write to a folder or iso image, and normally I'd just go to a folder. If you do this it does ignore the SSIF folder - it only works properly if you select iso as the output.

Here's a listing of the bd50 and bd25 discs:

Volume in drive E is CLASH OF THE TITANS 3D BD
Volume Serial Number is 0118-93E6

Directory of e:\bdmv\stream\ssif

25/06/2010 22:30 <DIR> .
25/06/2010 22:30 <DIR> ..
25/06/2010 22:30 40,643,745,792 00002.ssif
25/06/2010 22:30 50,583,552 00004.ssif
25/06/2010 22:30 1,910,784 00006.ssif
25/06/2010 22:30 8,091,648 00008.ssif
25/06/2010 22:30 1,044,480 00010.ssif
25/06/2010 22:30 125,884,416 00012.ssif
25/06/2010 22:30 2,537,472 00014.ssif
25/06/2010 22:30 693,061,632 00016.ssif
25/06/2010 22:30 239,616 00018.ssif
9 File(s) 41,527,102,064 bytes
2 Dir(s) 0 bytes free

Volume in drive E is CLASH OF THE TITANS 3D BD
Volume Serial Number is F7D6-93DD

Directory of e:\bdmv\stream\ssif

01/01/1970 01:00 <DIR> .
08/09/2012 19:30 <DIR> ..
08/09/2012 19:23 22,236,856,320 00002.ssif
08/09/2012 19:24 26,529,792 00004.ssif
08/09/2012 19:30 1,910,784 00006.ssif
08/09/2012 19:24 5,947,392 00008.ssif
08/09/2012 19:24 485,376 00010.ssif
08/09/2012 19:30 141,821,952 00012.ssif
08/09/2012 19:23 1,572,864 00014.ssif
08/09/2012 14:18 495,814,656 00016.ssif
08/09/2012 19:23 24,576 00018.ssif
9 File(s) 22,910,966,780 bytes
2 Dir(s) 0 bytes free


Don't forget my present this year Santa!

euhm you're wrong on that part. DVDCrap can shrink BD3D to BD25 as much as i'm santa. it can't, it does the same thing BDRB does. Ignore the SSIF folder, but keeps the menu intact. Result BD25 disc on which the 3D stream doesnt work.

[Ch3vr0n]

In that case i have some testing to do. It didn't do that the last time i heard about it's so called "shrinking" option. Which option do i pick. Got a couple discs lying arround, i wonder what the quality will be

[drmih]

Just read on the fly, or if you have already ripped to an iso, pick that up in the Full Copy mode. It automatically identifies it as a 3D disk. The trick is to save the output as an iso image and to change the output size to bd-25. I have only ever done mine from iso images ripped to the HDD, and output as an iso image on the hdd (so that I can mount and check it first).

Prometheus arrived today and I have already successfully made a bd-25 3D copy. To stop hijacking the thread, just pm me if you have any problems getting it to work.

[Ch3vr0n]

oi, i didn't start the hijack. U did. That being said already found out how to do it. Now back on topic

[RobertM]

Chevron, you should re-read your last response. It comes across as a little rude, which I'm sure wasn't the intent, considering that Drmih taught you something useful, and has offered personal assistance if you need it.

[drmih]

It's fine - I did hijack it but I knew there might be a few people who'd want to know more about how to do it and didn't want it in this thread - said multiple pms did arrive!

[Wizzu]

[Off topic]

"To stop hijacking the thread, just pm me if you have any problems getting it to work. "

Read/interpreted by Ch3vr0n as "stop highjacking the thread, PM me if you're too stupid to find it out on your own", thus his reaction.

I read/interpreted drmih's input rather differently, more like "I'm willing to help, but we are kinda highjacking the thread, so PM me if you want my help". )

Communication is fascinating. ;)

[/Off topic]
-----
September 7th, 2012 - v0.42.1
[...]
- Added a new hidden setting, IMPORT_FOLDER, which
allows you to select a location where any interim
imported items are kept.
[...]


This makes me think of something. Wouldn't it be also interesting to have the option to select (when possible) a different location for the WORKING folder than for the final target folder?

Let me make my point clearer. :)

Disc activity is pretty intensive during encoding and rebuild. So, I'm under the impression that (for those of us who have several physical disks) it could save encoding time to have the source to encode (the rip) on disk A, the working folder on disk B, and the target folder on disc C. Am I wrong? :confused:

[jdobbs]

[Off topic]

"To stop hijacking the thread, just pm me if you have any problems getting it to work. "

Read/interpreted by Ch3vr0n as "stop highjacking the thread, PM me if you're too stupid to find it out on your own", thus his reaction.

I read/interpreted drmih's input rather differently, more like "I'm willing to help, but we are kinda highjacking the thread, so PM me if you want my help". )

Communication is fascinating. ;)

[/Off topic]
-----


This makes me think of something. Wouldn't it be also interesting to have the option to select (when possible) a different location for the WORKING folder than for the final target folder?

Let me make my point clearer. :)

Disc activity is pretty intensive during encoding and rebuild. So, I'm under the impression that (for those of us who have several physical disks) it could save encoding time to have the source to encode (the rip) on disk A, the working folder on disk B, and the target folder on disc C. Am I wrong? :confused: I've answered this several times in this thread. I did considerable testing -- and the fact is that it doesn't help. It makes it slower. Most of the time, for various reasons, all the work has to be done in the working folder (e.g. building the M2TS), and then it is just "moved" to the output folder. If you point to a different drive it will actually take longer because it has to be copied/deleted rather than moved. In a move nothing actually happens to the huge file itself -- all that is changed is the file pointer of the file system referencing a different folder, and it only takes a few milliseconds. You might save yourself a little in required hard drive space -- but not enough to make much of a difference considering the size of most modern drives.

[Wizzu]

I've answered this several times in this thread. Oh I see, accept my apologies, then. I did considerable testing -- and the fact is that it doesn't help. [....] Thanks for the explanations, they make perfect sense to me.
Looks like I had a distorted idea of the chain of events during BDRB's work :D

[jdobbs]

Oh I see, accept my apologies, then.Thanks for the explanations, they make perfect sense to me.
Looks like I had a distorted idea of the chain of events during BDRB's work :D Not too distorted. If it didn't have potential I wouldn't have tested it in the first place. :)

[RobertM]

It makes a lot of sense, what JDObbs says, once you think about it.

Anybody can confirm his statement about moving on the same drive vs. moving to a different drive. Try it yourself: take a rebuilt BD folder and drag/drop it to a different location on the same drive -- takes no time; now try dragging dropping to a different drive -- takes ages.

When a different drive location would make sense is if the content of the file is changed, so you must rewrite all of the info instead of just moving it over unchanged. This would be the case when re-encoding video/audio, where the actual bits in the file change. In this case, it would definitely be faster to use another drive, but ONLY if the drive read/write times are a bottleneck. As most of us have seen, it doesn't take too much time to extract the data, but it takes hours to re-encode (depending on settings). Speeding up the read/write would make no practical difference because the processor is laboring away crunching data and is never really waiting on a read/write operation.

[Wizzu]

Anybody can confirm his statement about moving on the same drive vs. moving to a different drive. Of course. :)

My distorted vision was that the chain of events was these 3 steps:

1. Extract AV streams from the BD rip to the WORKFILE folder
(BTW this part is faster when source and destination are on 2 diff. physical discs - at least it is with my setup)

2. Compress/process these AV streams from, and to, the WORKFILES folder
that's the step that I thought could also be faster if 2 diff. locations were used

3. Rebuild the M2TS and BD structure from the compressed files.
This is not a step I thought could benefit from 2 diff. locations.

Now from jdobbs's explanations, I gather that my vision of step 2 is plain wrong. I guess only part of the needed files for encoding are in the WORFILE folder after step 1, and that most of the processing (step 2) is actually done from files that are still in the original rip location.

Then again, I can be wrong... again. :D

Whatever, I'll take jdobb's word for it that no further time can be gained @step2 by using different physical locations.
And just enjoy the program. :cool:

[jdobbs]

Actually step 2 is correct, and is how it is done now. When Compressing/Processing you are, in essence, moving data from the SOURCE folder, and processing it into the WORKING folder. The output of STEP 1 is in most cases only the audio/subs. The video is extracted, but only so that it can be used in the event that it doesn't need to be reencoded. That is very rare and in most instances the video is immediately removed following demux. The input to X264 (in step 2) is the source M2TS (via AVISYNTH or LAVF).

So... if you use a different physical drive for the SOURCE and the WORKING folders (as I always do) you will get a speed increase.

The total time used in steps 1 & 3 is almost insignificant compared to step 2.

[RobertM]

1. Extract AV streams from the BD rip to the WORKFILE folder
(BTW this part is faster when source and destination are on 2 diff. physical discs
Right. That's the way I set up my system, and it definitely saves time that way.

I guess only part of the needed files for encoding are in the WORFILE folder after step 1, and that most of the processing (step 2) is actually done from files that are still in the original rip location.

I don't think that's right. As far as I know step 2 takes place using files residing entirely in the workfiles folder.

My point was that the processor is the bottleneck, and that any read/write issues are negligible because the processor is never starved for data.

Anyway, that's all moot. JDobbs has done the validation work, so I feel quite comfortable leaving it as that. And, even if there were a slight, slight speed advantage, I'm not sure that it would justify further cluttering the "Setup" UI.

[RobertM]

When Compressing/Processing you are in essence moving data from the SOURCE folder, and processing it omto the WORKING folder.

Maybe I'm confused. Wouldn't be the first time ;)

[Wizzu]

Actually step 2 is correct, and is how it is done now. When Compressing/Processing you are, in essence, moving data from the SOURCE folder, and processing it into the WORKING folder. Help, :scared: now I'm confused too, since these two sentences are in contradiction! :confused:

"My" step 2 (the one I gathered that was wrong, but you're now referring to as being right) was that processing took place entirely FROM and TO the WORFILE folder, thus not accessing the source (rip) folder anymore.

But your second sentence seems to confirm my recent intuition, which was that during compresion/processing, data from the source (rip) folder is actually still accessed.

Then you mention that (during step 1) "the video is extracted, but only so that it can be used in the event that it doesn't need to be reencoded", which was the missing piece of the puzzle for me, allowing me to understand why my vision of the whole thing was distorted in the first place.

So how on earth could "my" step 2 (as in post #15933) be correct...??? :confused:

[omegaman7]

The working folder is the output folder. In the final step, only directories are changed(fractions of a second). Makes perfect sense to me :) Faster hard drive = lower latency. Even a slow hard drive should be able to keep up with a VERY busy processor though.

[jdobbs]

Help, :scared: now I'm confused too, since these two sentences are in contradiction! :confused:

"My" step 2 (the one I gathered that was wrong, but you're now referring to as being right) was that processing took place entirely FROM and TO the WORFILE folder, thus not accessing the source (rip) folder anymore.

But your second sentence seems to confirm my recent intuition, which was that during compresion/processing, data from the source (rip) folder is actually still accessed.

Then you mention that (during step 1) "the video is extracted, but only so that it can be used in the event that it doesn't need to be reencoded", which was the missing piece of the puzzle for me, allowing me to understand why my vision of the whole thing was distorted in the first place.

So how on earth could "my" step 2 (as in post #15933) be correct...??? :confused: I can see how you'd be confused. I guess I should have written my own steps instead of referencing yours. Your statement is correct in that you say it is the "compress/process step" -- the only thing that is wrong is that you say "from, and to" when actually it is only "to". The "from" is the SOURCE folder. The exception is the audio streams which are either reencoded or used intact from the WORKING folder -- but that only takes a few minutes of the entire rebuild process. Subtitles are always used intact (unless they have to be converted for DVD output).

The reason I extract the video is that it doesn't add anything in terms of time since I have to extract the audio anyway. That way it is available if it will fit "as-is". I then remove it if it has to be reencoded (to save space).

[Wizzu]

the only thing that is wrong is that you say "from, and to" when actually it is only "to". Pfffeeeeewww (heaving a sight with ease :D) - that was an important detail that I wasn't sure I got right (BTW I did...) and this clarification of yours is very welcome because it lifts the doubt in my mind.

Thanks, no confusion left here :goodpost:

[Wizzu]

I don't think that's right. As far as I know step 2 takes place using files residing entirely in the workfiles folder.And that's what I originally thought too, because of the folder size right after the extraction.
We now both know that we were wrong, and more importantly, why we were.My point was that the processor is the bottleneck, and that any read/write issues are negligible because the processor is never starved for data.That was a good point nonetheless. :)

[AmigaFuture]

It's funny how people try to "Save Time" into a little box for "later" when it's Always ~Now~ and constantly changing because of their thoughts/preferences and cannot be "saved". I once held that "mindset", or "concept"..until I decided to check Inside a lot more. :D

Thanks for the suggestion, Jdobbs, about emailing. I'm checking a couple things before I do that. If 2 movies seem to be effected, then more may be and I want to know what the root of the challenge is I've noticed. What model is your Blu-ray Burner? Mine might be faulting and I'm checking that.

Thank You.

[omegaman7]

My iHES108 began causing read errors. One is rather odd. The rip appeared fine, but the encode didn't go well. But when ripped with another drive, the output was fine. I guess just enough information was mutated enough, to not notice visually, but effected the helper apps. Wouldn't be the first Lite-on to give me grief. THough I've had another lite-on that was VERY good. I currently use two LG's. A WH10LS30(only reading/burns unreliably), and a WH12LS39 for my burning/reading. I slapped a 3yr warrantly on that bad boy :)

[Random987]

Since upgrading to v0.42.03, I experienced the following error:

BD Rebuilder experienced an error 1506 [11:26:39] DoEncoding() 00052 1506

I tried it both on a new burn (backing up Toy Story) and one that previously worked before (50/50). I received the same error. Inspect.exe doesn't show any problems.

Any ideas?

[Ch3vr0n]

Mind posting the actual bdrb log and the actual inspect.exe results. Don't just tell inspect reports everything OK, we need to see the actual output.

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk

[jdobbs]

Since upgrading to v0.42.03, I experienced the following error:

BD Rebuilder experienced an error 1506 [11:26:39] DoEncoding() 00052 1506

I tried it both on a new burn (backing up Toy Story) and one that previously worked before (50/50). I received the same error. Inspect.exe doesn't show any problems.

Any ideas? Look for illegal characters in your installation path. At that point (1506) all BD-RB is trying to do is read from the INF file, a very simple function -- and it is getting a "Bad filename" error (0052). The actual filename of the INI file is always the same and BD-RB goes through that exact same code segment for every job it runs -- the only thing I can imagine is a pathname that has something goofy involved.

[Random987]

Here is my log file:

----------------------
[10/09/12] BD Rebuilder v0.42.03 (beta)
[14:28:41] Source: TOY_STORY_PLAYLIST_00150
- Input BD size: 19.48 GB
- Approximate total content: [01:21:04.901]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: High-Speed Option (BD-25), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
- [14:28:41] DoEncoding() 00052 1506
[14:28:43] - Failed to complete.

My Inspect.exe:

Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3326], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.41.0.1, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok


The weird thing is that I haven't done anything different than any of my other backup attempts. I even tried one that worked previously and still got the same error.

With the file name, I choose that proper folder through the program's "browse" function. If I had to guess, the "source" from the above log file looks different.



Look for illegal characters in your installation path. At that point (1506) all BD-RB is trying to do is read from the INF file, a very simple function -- and it is getting a "Bad filename" error (0052). The actual filename of the INI file is always the same and BD-RB goes through that exact same code segment for every job it runs -- the only thing I can imagine is a pathname that has something goofy involved.

[jdobbs]

You completely missed the point of the post. What is the installation path?

[Random987]

I am not exactly sure what you mean.

The program is located at:

C:\Program Files (x86)\BD-RB\BD_Rebuilder




You completely missed the point of the post. What is the installation path?

[Random987]

Sorry guys, I am an idiot. I figured it out. I was trying to burn straight to a bluray disc (the working path was to the bluray). It has been a while....:o:o:o:o

[omegaman7]

So is "Error in attempt to multiplex (.Meta)" pretty much guaranteed to be a corrupt audio track? Which is essentially a bad rip. That sucks. Aw well. It's only the secondary DTS track thankfully.

Maybe it's the secondary video track. Guess I'll have to try movie only :S

Yup. Secondary video was buggered. I wish my reading drives would either let me know, or simply say it cannot copy...

[staros]

I discovered a bug with the CRF prediction algorithm.

If you choose to do 1-pass CRF, BD-RB performs several "runs" of short encodes in order to determine the appropriate CRF value to use for the whole source. The first two runs are upper and lower bound "tests" so BD-RB can get a feel of the source material. For instance, it may first try CRF 22.23 and then CRF 16.11. The results of these two runs determine what CRF value BD-RB should try in the third run. This process continues until BD-RB is confident it has honed in on the "ideal" CRF value and then starts the actual full encode using this value.

Here's the bug: I encoded a source whose target bitrate must have been very close to the output bitrate from the first prediction run. Instead of trying a second prediction run (the upper/lower "bound"), BD-RB encoded the entire source using the CRF value it would have used in the second run. So the final output ended up around 600MB instead of 4+ GB.

I apologize I don't have the log to post. But it may not require duplication to diagnose, as this seems like a simple logic error. Basically the code should either force itself to always perform 2 prediction runs before doing the full encode, or make sure the CRF value variable is correct before exiting the prediction loop.

Tell me if you need more details.

[AmigaFuture]

Omegaman7: If you listen to the drive as it rips, or watch AnyDVD at times..you'll know if there's a Read Error or Sector error or..if it's just dirty or scratched. They make noises and the Software shows pauses. My LG's (WH10LS30) Blue Light changes flickering when encountering possible challenges.

[kanerulz69]

if i am doing a movie and the after the 20th cen fox into comes on it goes to a black screen, can i edit the playlist or do away with that so it doesn't just pause at a black screen?

[jdobbs]

if i am doing a movie and the after the 20th cen fox into comes on it goes to a black screen, can i edit the playlist or do away with that so it doesn't just pause at a black screen? Possibly -- but you'd have to know the M2TS for the black screen, and it couldn't be a part of a larger playlist.

[kanerulz69]

Possibly -- but you'd have to know the M2TS for the black screen, and it couldn't be a part of a larger playlist.

i installed bdinfo, but i dont know what i am supposed to do to bypass that black screen, whatever file is making it do it

[Adbear]

I suspect there isn't one, I think it just goes black because it's finished playing the previous file and can't start the next one. If you have this issue then you need to try re-ripping from the original with an up to date decryption program

[setarip_old]

@kanerulz69

Hi!

If you're referring to the TEMPORARY blackscreen that we see on all recent 20th Century Fox Blu-rays, if you listen very closely to your player, you'll hear the drive thrashing - it's DOING "stuff" (probably related to java and protection) for 15 to 20 seconds - and then a new Fox logo appears.

If this is what you're experiencing, it's nothing out of the ordinary...

[kanerulz69]

@kanerulz69

Hi!

If you're referring to the TEMPORARY blackscreen that we see on all recent 20th Century Fox Blu-rays, if you listen very closely to your player, you'll hear the drive thrashing - it's DOING "stuff" (probably related to java and protection) for 15 to 20 seconds - and then a new Fox logo appears.

If this is what you're experiencing, it's nothing out of the ordinary...

I let it sit for 5 minutes and it never went anywhere, just sat at the black screen

[setarip_old]

@kanerulz69

1) What player (and player version number) are you using for playback? (You should use a standalone player)

2) What software and procedures did you use to initially "rip" your commercial Blu-ray discs?

[kanerulz69]

@kanerulz69

1) What player (and player version number) are you using for playback? (You should use a standalone player)

2) What software and procedures did you use to initially "rip" your commercial Blu-ray discs?

1) TotalMedia Theatre 5 v5.0.1.87 & tried Corel WinDVD Pro 11, VLC player wouldn't play, kept getting errors

2) dvdfab, cause anydvd hd takes forever

[Yordan5]

1) TotalMedia Theatre 5 v5.0.1.87 & tried Corel WinDVD Pro 11, VLC player wouldn't play, kept getting errors

2) dvdfab, cause anydvd hd takes forever

AnyDVD taking forever is a very strong indication of a bad disk. It may be a simple case of finger smudges on the disk that can be easily cleaned off.

[setarip_old]

@kanerulz69

Once again, burn to disc and play on a standalone player...

[jdobbs]

1) TotalMedia Theatre 5 v5.0.1.87 & tried Corel WinDVD Pro 11, VLC player wouldn't play, kept getting errors

2) dvdfab, cause anydvd hd takes foreverAs I've said many times, bug reports will not be accepted unless the bug has been repeated on a standalone player. Software players are just too buggy.

Sorry.

[Adbear]

It can also be caused by the disc not being decrypted properly. you need to go back and re-rip the original disc with the latest version of the decryption software (if it's AnyDVD HD then look at the beta's). If it still doesn't work then report it to the maker of the decryption software as it's probably a JAVA issue that may need fixing for that disc

[Ch3vr0n]

Well i just have the weirdest issue ever. did a full disc backup of snow white & the huntsman. All trailers etc have audio, like the main disc. Menu has audio however there's 1 big problem. Retail disc = audio, full disc backup: no audio on movie with standalone player and i think i narrowed down the problem.

TMT 5 plays the audio descriptive track by default for extended version, when playing on the standalone. No audio (when selecting dutch on the 1st menu screen, ditto for english selecting on menu)
The Anydvd rip before shrinking does not have that problem.

PDVD 10 doesnt give any audio at all. So it looks like something went wrong with the AUD_003 DTS-HD XLL, Multi-Ch, English stream and TMT5 defaults to the descriptive audio track. Retail disc & full disc anydvd rip play just fine on TMT 5 & Standalone (for retail disc)

Standalone is Panasonic DMP-BD85

re-doing a full disc with x264 LAVF

[kanerulz69]

As I've said many times, bug reports will not be accepted unless the bug has been repeated on a standalone player. Software players are just too buggy.

Sorry.

I did play it in my standalone player on my tv and it still did the same thing, i already said i tried a regular dvd player, not just a computer, and i even re-ripped the movie and it says this now instead of the black screen

"this disc has been coded for Region A only and will not play in your Region B Blu-Ray Player, but i dont have a region b player only a usa region a player

[AmigaFuture]

kanerulz69: I'd use AnyDVD HD, as it seems DVDFab isn't ripping correctly, or Update DVDFab...?

[busch42]

I'm not sure if this is a bug with BDRebuilder, But I just did a main movie only with the movie Prometheus and it shranked the movie down to 6.45GB, I doubled checked an I had the correct setting to BD25 and this is the first time this has happen.

[Ch3vr0n]

ok, just did a standard "full disc backup" & kept all english streams. Same thing, descriptive audio on the main movie in TMT 5, no audio at all on standalone & PDVD 10. Retail disc plays just fine. I don't know if its because there's a extended version & cinema version. But i do believe it has something to do with it. on the retail disc the descriptive audio should only be available to the cinema version. That's probably confusing BDRB

[kanerulz69]

kanerulz69: I'd use AnyDVD HD, as it seems DVDFab isn't ripping correctly, or Update DVDFab...?

i fixed it by taking the jar files from another movie and replacing them and it works perfect now

[Adbear]

Then your decryption software wasn't decrypting it properly and taking java files from another movie may cause you other issues as they are built for each movie.

[kanerulz69]

Then your decryption software wasn't decrypting it properly and taking java files from another movie may cause you other issues as they are built for each movie.

this is true i suppose but i watched it and it work flawlessly, but i did it from another movie from company F0X and the black screen showed a moving java file and it worked

[Adbear]

Still doesn't mean it'll work properly, JAVA menu's are built individually for each film as are the files which is why you sometimes get issues such as this. You should just go back and re-rip it using the latest beta build of AnyDVD HD, if it still has an issue after that then post up on their forum with a logfile and it'll probably be fixed with in a day

[setarip_old]

@kanerulz69

Please start a separate thread, since it's apparent that your "situation" has nothing to do with bug reports for the beta testing of BD Rebuilder...

[staros]

I'm not sure if this is a bug with BDRebuilder, But I just did a main movie only with the movie Prometheus and it shranked the movie down to 6.45GB, I doubled checked an I had the correct setting to BD25 and this is the first time this has happen.
What method did you use to encode? 2-pass? 1-pass CRF? 1-pass ABR?

I've encountered a similar bug in 1-pass CRF so I'm curious if this is the same problem.

[mercadonegro]

The conversion is run as a batch job (in order to redirect the output of WAVI into AFTEN). So that might be another place to look. Unfortunately this is definitely a rights/privilege issue, which is specific to your system. It's tough to debug one of those on a forum, there are lots of possibilities.

Hello Jdobbs

finally works. I did two things.
first: remove accents (') that had the names of the folders.
second: BDRebuilder delete folder and start again, clear up the history records.

thanks and congratulations.

thanks and congratulations.

[setarip_old]

doesn't CRF REQUIRE two passes?

[jdobbs]

doesn't CRF REQUIRE two passes?

I assume you mean in prediction? Not necessarily. If the first pass is within a range of what the sample target size should be -- it is assumed to be the right CRF value.

If you mean, is CRF normally an object of a two pass encode. No. It is meant to be a 1 pass option (Constant Rate Factor) that gives you more of a "quality" based target than a quantization based target for rate control (i.e --qp). In BD-RB it is first preceded by 1-n prediction passes using representative samples of the source that try to estimate the final output size. That is followed by a final (single) pass using the selected CRF value from the predictions.

The upside to CRF in BD-RB that it creates higher quality output (in most cases) than an ABR single pass typically would without adding on the additional time of a complete 1st pass. The downside is that although it is often accurate -- samples can sometimes be deceiving and you might get output that is under or oversized.

[Sharc]

I've encountered a similar bug in 1-pass CRF so I'm curious if this is the same problem.
Could it be this problem?

http://forum.doom9.org/showthread.php?p=1574290#post1574290

http://forum.doom9.org/showthread.php?p=1574298#post1574298

[setarip_old]

@jdobbs

Thank you for the enlightening response ;>}

[staros]

Could it be this problem?

http://forum.doom9.org/showthread.php?p=1574290#post1574290

http://forum.doom9.org/showthread.php?p=1574298#post1574298

From your post:


- [11:49:29] Performing CRF Prediction...
- Analyzing 19.00 [34.50]
- [11:49:41] Encoding using constant rate factor.


Yes, it's exactly like that. In some uncommon cases, BD-RD does just 1 prediction run before embarking on the full encode and it uses a CRF value that clearly does not make sense.

In the case above, encoding @ CRF 19.00 on the sample apparently resulted in a bitrate that was close to the desired bitrate. You can verify this because the WORKFILES dir contains the .264 file from the last prediction encode and you can use a tool to read its bitrate.

So BD-RD decided to exit the prediction "run loop" and encode the whole video. The problem of course is that it used 34.50 instead of either say 18.95 or 19.05. CRF 34.50 would have been used for the 2 prediction run.

It's a simple problem, possibly fixed by changing a single line of code.

[busch42]

staros, I fiqured it out, There was no problem, What happen was when I converted a blu-ray to dvd9 I forgot to go back to alternate movie-only output and change it back to standard output.

[Sharc]

From your post:


- [11:49:29] Performing CRF Prediction...
- Analyzing 19.00 [34.50]
- [11:49:41] Encoding using constant rate factor.


Yes, it's exactly like that. In some uncommon cases, BD-RD does just 1 prediction run before embarking on the full encode and it uses a CRF value that clearly does not make sense.

In the case above, encoding @ CRF 19.00 on the sample apparently resulted in a bitrate that was close to the desired bitrate. You can verify this because the WORKFILES dir contains the .264 file from the last prediction encode and you can use a tool to read its bitrate.

So BD-RD decided to exit the prediction "run loop" and encode the whole video. The problem of course is that it used 34.50 instead of either say 18.95 or 19.05. CRF 34.50 would have been used for the 2 prediction run.

It's a simple problem, possibly fixed by changing a single line of code.
Great that you confirm my observation. Fortunately it only happens in those rare cases with the lucky punch in the first CRF prediction round.
Perhaps jdobbs can occasionally look into it ;)

[HatchetMan]

Anybody ever had the problem where the encode completed and the file was nowhere to be found? I had 1 movie out of 12 batch (all original BD rips by AnyDVD HD) that were to output to MKV (to the same directory), all perfect output but Up (2009) only the .INF exists, and no errors. It's odd to say the least, and I can post more (logs) if nobody else has experienced this w/ solution. It has happened for the 2nd time, so it is recurring and I would like to put a stop to it. I watched the particular bd-rb process for the subject title upon 2nd attempt to begin and all did seem normal, so what the heck?

[Adbear]

Are you sure it didn't just error out and then skip on to the next movie, I've had that before when doing full disc backups, queuing up 5 or 6 films then coming back later to find it didn't do one of them

[HatchetMan]

It seemed to fail making the mkv structure?

[10/18/12] BD Rebuilder v0.42.03 (beta)
[00:21:43] Source: UP_2009_PLAYLIST_00100
- Input BD size: 23.78 GB
- Approximate total content: [01:36:07.553]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1920x1080, 640Kbs DD5.1
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[00:21:43] PHASE ONE, Encoding
- [00:21:43] Processing: VID_00050 (1 of 22)
- [00:21:43] Extracting A/V streams [VID_00050]
- [00:27:14] Reencoding video [VID_00050]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,067 frames
- [00:27:14] Reencoding: VID_00050, Pass 1 of 1
- [00:29:19] Video Encode complete
- [00:29:19] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [00:32:41] Processing: VID_00051 (2 of 22)
- [00:32:41] Extracting A/V streams [VID_00051]
- [00:32:45] Reencoding video [VID_00051]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 457 frames
- [00:32:45] Reencoding: VID_00051, Pass 1 of 1
- [00:33:37] Video Encode complete
- [00:33:37] Processing: VID_00054 (3 of 22)
- [00:33:37] Extracting A/V streams [VID_00054]
- [00:33:46] Reencoding video [VID_00054]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,397 frames
- [00:33:46] Reencoding: VID_00054, Pass 1 of 1
- [00:38:39] Video Encode complete
- [00:38:39] Processing: VID_00055 (4 of 22)
- [00:38:39] Extracting A/V streams [VID_00055]
- [00:38:44] Reencoding video [VID_00055]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 680 frames
- [00:38:44] Reencoding: VID_00055, Pass 1 of 1
- [00:39:32] Video Encode complete
- [00:39:32] Processing: VID_00058 (5 of 22)
- [00:39:32] Extracting A/V streams [VID_00058]
- [00:39:43] Reencoding video [VID_00058]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,163 frames
- [00:39:43] Reencoding: VID_00058, Pass 1 of 1
- [00:44:17] Video Encode complete
- [00:44:17] Processing: VID_00059 (6 of 22)
- [00:44:17] Extracting A/V streams [VID_00059]
- [00:44:26] Reencoding video [VID_00059]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,640 frames
- [00:44:26] Reencoding: VID_00059, Pass 1 of 1
- [00:46:59] Video Encode complete
- [00:46:59] Processing: VID_00062 (7 of 22)
- [00:46:59] Extracting A/V streams [VID_00062]
- [00:47:05] Reencoding video [VID_00062]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 583 frames
- [00:47:05] Reencoding: VID_00062, Pass 1 of 1
- [00:48:04] Video Encode complete
- [00:48:04] Processing: VID_00063 (8 of 22)
- [00:48:04] Extracting A/V streams [VID_00063]
- [00:48:09] Reencoding video [VID_00063]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 817 frames
- [00:48:09] Reencoding: VID_00063, Pass 1 of 1
- [00:49:15] Video Encode complete
- [00:49:15] Processing: VID_00066 (9 of 22)
- [00:49:15] Extracting A/V streams [VID_00066]
- [00:49:23] Reencoding video [VID_00066]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,511 frames
- [00:49:23] Reencoding: VID_00066, Pass 1 of 1
- [00:51:35] Video Encode complete
- [00:51:35] Processing: VID_00067 (10 of 22)
- [00:51:35] Extracting A/V streams [VID_00067]
- [00:51:45] Reencoding video [VID_00067]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 2,155 frames
- [00:51:45] Reencoding: VID_00067, Pass 1 of 1
- [00:55:11] Video Encode complete
- [00:55:11] Processing: VID_00070 (11 of 22)
- [00:55:11] Extracting A/V streams [VID_00070]
- [00:55:18] Reencoding video [VID_00070]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,300 frames
- [00:55:18] Reencoding: VID_00070, Pass 1 of 1
- [00:56:57] Video Encode complete
- [00:56:57] Processing: VID_00071 (12 of 22)
- [00:56:57] Extracting A/V streams [VID_00071]
- [00:57:03] Reencoding video [VID_00071]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 953 frames
- [00:57:03] Reencoding: VID_00071, Pass 1 of 1
- [00:58:16] Video Encode complete
- [00:58:16] Processing: VID_00074 (13 of 22)
- [00:58:16] Extracting A/V streams [VID_00074]
- [00:58:51] Reencoding video [VID_00074]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 11,322 frames
- [00:58:51] Reencoding: VID_00074, Pass 1 of 1
- [01:12:53] Video Encode complete
- [01:12:53] Processing: VID_00075 (14 of 22)
- [01:12:53] Extracting A/V streams [VID_00075]
- [01:13:00] Reencoding video [VID_00075]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,193 frames
- [01:13:00] Reencoding: VID_00075, Pass 1 of 1
- [01:14:23] Video Encode complete
- [01:14:23] Processing: VID_50266 (15 of 22)
- [01:14:23] Extracting A/V streams [VID_50266]
- [01:17:12] Reencoding video [VID_50266]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 72,972 frames
- [01:17:12] Reencoding: VID_50266, Pass 1 of 1
- [03:13:05] Video Encode complete
- [03:13:05] Processing: VID_00079 (16 of 22)
- [03:13:05] Extracting A/V streams [VID_00079]
- [03:13:17] Reencoding video [VID_00079]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 3,297 frames
- [03:13:17] Reencoding: VID_00079, Pass 1 of 1
- [03:17:35] Video Encode complete
- [03:17:35] Processing: VID_00082 (17 of 22)
- [03:17:35] Extracting A/V streams [VID_00082]
- [03:17:43] Reencoding video [VID_00082]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,496 frames
- [03:17:43] Reencoding: VID_00082, Pass 1 of 1
- [03:19:47] Video Encode complete
- [03:19:47] Processing: VID_00083 (18 of 22)
- [03:19:47] Extracting A/V streams [VID_00083]
- [03:19:52] Reencoding video [VID_00083]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 480 frames
- [03:19:52] Reencoding: VID_00083, Pass 1 of 1
- [03:20:43] Video Encode complete
- [03:20:43] Processing: VID_00086 (19 of 22)
- [03:20:43] Extracting A/V streams [VID_00086]
- [03:21:33] Reencoding video [VID_00086]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 20,581 frames
- [03:21:33] Reencoding: VID_00086, Pass 1 of 1
- [03:57:39] Video Encode complete
- [03:57:39] Processing: VID_00087 (20 of 22)
- [03:57:39] Extracting A/V streams [VID_00087]
- [03:57:50] Reencoding video [VID_00087]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 4,026 frames
- [03:57:50] Reencoding: VID_00087, Pass 1 of 1
- [04:02:59] Video Encode complete
- [04:02:59] Processing: VID_00090 (21 of 22)
- [04:02:59] Extracting A/V streams [VID_00090]
- [04:03:13] Reencoding video [VID_00090]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5,601 frames
- [04:03:13] Reencoding: VID_00090, Pass 1 of 1
- [04:10:31] Video Encode complete
- [04:10:31] Processing: VID_00091 (22 of 22)
- [04:10:31] Extracting A/V streams [VID_00091]
- [04:10:36] Reencoding video [VID_00091]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 592 frames
- [04:10:36] Reencoding: VID_00091, Pass 1 of 1
- [04:11:24] Video Encode complete
[04:11:24]PHASE ONE complete
[04:11:24]PHASE TWO - Rebuild Started
- [04:11:24] Building ALTERNATE OUTPUT Structure
[04:13:01] - Failed to REBUILD

[dreamk]

No one seems to wrote about this anything, but when i used BD-Rebuilder 0.42.03 to this new Indiana Jones box disc 5 (bonus disc), came out 25.3GB large so its over 2GB too big (target size is selected BD-25).
All movie discs in that box set worked perfectly fine with BD-Rebuilder.

My Indiana Jones box is European so its region B, but what i read elsewhere content in region A box should be same except subs and some audio languages, so same should happen US version also i think.

Any suggestion?

I have pretty basic settings in BD-Rebuilder used and no hidden options used, or should i post some logs or configs too?
Just english audio kept (keep HD audio selected), + english and finnish subtitles, all others removed. No errors reported during or after rebuilding process.

[SquallMX]

No one seems to wrote about this anything, but when i used BD-Rebuilder 0.42.03 to this new Indiana Jones box disc 5 (bonus disc), came out 25.3GB large so its over 2GB too big (target size is selected BD-25).
All movie discs in that box set worked perfectly fine with BD-Rebuilder.

My Indiana Jones box is European so its region B, but what i read elsewhere content in region A box should be same except subs and some audio languages, so same should happen US version also i think.

Any suggestion?

I have pretty basic settings in BD-Rebuilder used and no hidden options used, or should i post some logs or configs too?
Just english audio kept (keep HD audio selected), + english and finnish subtitles, all others removed. No errors reported during or after rebuilding process.
'
Yes, :logfile:. Maybe some setting is causing the problem.

[mrintegral]

@jdobbs

In "movie only" mode I often experience an error: "ExtractAudioSubs() 00058 1605". It does not occur during full movie backup, however, I guess it is not an error related to BDRebuilder itself but to my system configuration (the last command is the x264 line. Inspect says everything is ok...)
Could you tell me what the error means that would help me get my system straight.
Thanks
MrIntegral

[jdobbs]

Great that you confirm my observation. Fortunately it only happens in those rare cases with the lucky punch in the first CRF prediction round.
Perhaps jdobbs can occasionally look into it ;)Anyone have an NTSC example and settings that I can use that will repeat it? If I can follow the code I might be able to find what's causing the goofiness.

[jdobbs]

Anybody ever had the problem where the encode completed and the file was nowhere to be found? I had 1 movie out of 12 batch (all original BD rips by AnyDVD HD) that were to output to MKV (to the same directory), all perfect output but Up (2009) only the .INF exists, and no errors. It's odd to say the least, and I can post more (logs) if nobody else has experienced this w/ solution. It has happened for the 2nd time, so it is recurring and I would like to put a stop to it. I watched the particular bd-rb process for the subject title upon 2nd attempt to begin and all did seem normal, so what the heck?

Check the name. If you are running a batch and the output name is the same as one of your previous encodes, you are not asked "Do you want to overwrite?" -- it is just written.

[jdobbs]

@jdobbs

In "movie only" mode I often experience an error: "ExtractAudioSubs() 00058 1605". It does not occur during full movie backup, however, I guess it is not an error related to BDRebuilder itself but to my system configuration (the last command is the x264 line. Inspect says everything is ok...)
Could you tell me what the error means that would help me get my system straight.
Thanks
MrIntegral That error is "File already exists.". That error is occuring at a point where BD-RB is attempting to rename the output of extracted audio on a multi-part source. If you can give me a title where this occurs and your settings at the point it happens I may be able to repeat it and identify the cause.

[starc2k]

Hi jdobbs, i have a strange issue....when i run bdrebuilder (lasta version 0.42.03) , click "browse" and only can explore the desktop folder, can´t open anyother folder....any suggestions?

[worknstiff]

@ jdobbs RE: Anyone have an NTSC example and settings that I can use that will repeat it? If I can follow the code I might be able to find what's causing the goofiness.

Don't know if the CRF is the reason but try to do Prometheus and do movie and menus. Blank every thing but leave all the english and spanish audio and all subs. I did a custom 24250 size, and this got me a whopping 24.3gb. So I next did a custom 50000 and let it complete. It came out like 42.6gb. I next ran this encode back thru, first trying full backup, custom size 23500. This got me a a 22000gb. I always like to get the max bitrate on a 25 disk, usually trying to get 22.9gb but after running it 6 different time and increasing it 250ms each time, I finally ended up just keepig all 4 of the english audios and 4subs and giving up at 22.8 after deleting all the other audio to get it down to that. BD_Rebuilder does not like some movies with lots of audio and subs and it does the goldilocks filesize output. This movie was the absolute hardest to get "JUST RIGHT", but I really like the movie and wanted to have the best possible bitrate devoted to it. I think some of the really high bitrate movies give it a hard time estimating the final output especially when you are pushing the filesize limit like I am doing.

RE: Thanks jdobbs, I really enjoy using BD_RB and think it is the best HD backup program I have ever used, thanks again. Also Thanks to drmih for the 3D program tip, I have used it to back-up Prometheus and 4 other 3D movies so far and have been pleasantly surprised how well they turn out. I just wish I had the ability to blank some of the stuff like BD_Rebuilder does and get the filesize down.

[AmigaFuture]

worknstiff: You do, or rather BD-RB does. Check the "HIDDENOPTS.TXT" inside the BD-RB directory. :D

[Marban]

Thank you very much for this programm.

I have rebuilded the BD "The Punisher" to DVD.
My problem is, the german Subtitle is on a wrong position.

http://imageshack.us/a/img513/2350/unbenanntafs.jpg

Can everybody help me, to find the right settings?

I see die HD2DVD on my DVD Player =)

[jdobbs]

Doom9 forum rules prohibit discussions related to pirated or bootlegged sources. Please refrain from any references of this type in the future. No "judging" here -- but the forum must be protected to continue functioning in its current capacity.

[Marban]

Sorry, i have edit my post...

Can everybody help me to find a answer for my subtitle problem?

[Ch3vr0n]

I don't believe this is a BD-Rebuilder, i'm willing to bet that on the original blu-ray the subtitles are also in that location? If they are, then BDRB rebuilt to DVD correctly and there is nothing that can be done.

[mrintegral]

@jdobbs:
You can see from my settings that I haven't limited the audio / subtitles to one track. I always do two languages and subtitles.

Settings are:

[Options]
VERSION=0.42.0.3
MODE=0
ENCODE_QUALITY=0
ONEPASS_ENCODING=0
AUTO_QUALITY=1
AUDIO_TO_KEEP=deu;eng;ger;
SUBS_TO_KEEP=deu;eng;ger;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=10000
TARGET_SIZE=10000
[Paths]
SOURCE_PATH=X:\TRIBUTE_001\
WORKING_PATH=X:\TRIBUTE_TO_PANEM_CONV\




LastCMD is:
"C:\Program Files\BD_RBV04203\tools\x264.exe" "X:\TRIBUTE_TO_PANEM_CONV\WORKFILES\VID_00000.AVS" --preset superfast --bluray-compat --b-pyramid none --weightp 1 --qpmin=0 --bitrate 5812 --level 4.1 --qpfile "X:\TRIBUTE_TO_PANEM_CONV\WORKFILES\VID_00000.CHP" --sar 1:1 --aud --nal-hrd vbr --pic-struct --vbv-bufsize 30000 --keyint 24 --min-keyint 1 --ipratio 1.1 --pbratio 1.1 --vbv-maxrate 35000 --threads auto --slices 4 --thread-input --stats "X:\TRIBUTE_TO_PANEM_CONV\WORKFILES\VID_00000.AVS.264.stats" --pass 2 --output "X:\TRIBUTE_TO_PANEM_CONV\WORKFILES\VID_00000.AVS.264"


It does not really depend on the title (in 90% of all cases I see that error - Usually I remux the main movie with tsmuxer to bluray disk and convert full movie with BDRebuilder. Ok, not very elegant but works perfectly) and I remember on very early versions of BDRebuilder I did not experience that error.
thx
MrIntegral

[colinhunt]

04203 has started acting up. I did 30+ titles on it without any problems, but now it can't finish anything without crashing at least once. It either stops on a "Failed video encode" error right at the beginning of pass 1:

- [13:03:24] Reencoding: VID_00102, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.42.03 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.11.96.14, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[13:03:30] - Failed video encode, aborted

or at some point during pass 2, with x264.exe simply giving up. It is still eating 629MB of RAM but does nothing. BD-RB waits patiently for x264 and lets me Abort encoding.

I'm running BD-RB on a laptop, haven't changed hardware or installed new applications. At some point I did let Windows 7 (x64 Ultimate) install some Security updates, but that's the only thing I can think of that has changed recently.

Update: I checked Event Viewer and found something interesting in the Application Log:

Faulting application name: DGIndexNV.exe, version: 0.0.0.2041, time stamp: 0x4f332c75
Faulting module name: DGIndexNV.exe, version: 0.0.0.2041, time stamp: 0x4f332c75
Exception code: 0xc0000005
Fault offset: 0x00023985
Faulting process id: 0x1024

I'll try updating DGIndexNV to v2043 and perhaps updating to newer Nvidia drivers.

[jdobbs]

I'd suggest you remove all the helper apps (HAALI, AVISYNTH, and FFDSHOW) and install them again. When it starts acting up after a history of successful encodes, one of those (or a dependency) has usually been "adjusted" by another application.