BD Rebuilder Beta - Bug Reports Only

[HWK]

I dont think that rip is bad because the created iso with advd plays fine after 7:34min and my original Blu-Ray too.

Same thing with Lego Movie 3D.

Are you creating copy in 3D or 2D? Also can you post screenshot of BD-RB when it opened lego movie and 2D backup is selected.

[gonca]

Possible bug with Import in 48.02

Sanctuary BD season 3 or 4
Importing the season discs with 48.02 results in an import folder with video only. Reverting to 47.07 and it imports fine

INI file is same for both versions.

[Options]
VERSION=0.48.0.2
MULTIPROCESS=1
FIXED_CRF=18
HC_PROFILE=BEST
DEFAULT_LANG=eng
ENABLE_TEST=1
ENABLE_BLANKING=0
IMPORT_FOLDER=D:\
KEEP_HD_LPCM=1
DEINTERLACER_TYPE=3
UPRESIZE=LanczosResize
SD_PROGRESSIVE=1
MOVIE_ONLY_LOOP=0
REMOVE_IMPORT=1
USE_ZLIB=0
MODE=0
ENCODE_QUALITY=3
ONEPASS_ENCODING=1
AUTO_QUALITY=0
MENU_BACKGROUND=C:\Program Files (x86)\BD_RB\misc\menuback.jpg
MIN_M2TS_SIZE=1
IMPORT_THRESHOLD=35
QUICK_PLAY_THRESHOLD=10
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=1
USE_FILTERS=0
BDMV_CERT_ONLY=1
USE_LAVF=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=1
OUTPUT_3D=0
NEROAAC=0
SUPTITLE=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=8600
TARGET_SIZE=8600
MOVIEONLY_TYPE=0
ALTCRF=18
ALT_TARGET=1024
ALTMETHOD=0
ALTAUTOCROP=1
AUTO_BURN=0
MENU_AUTO_BACKGROUND=1
MENU_PLAY_SEQUENTIAL=0
MENU_START_WITH_MENU=1
IGNORE_3D=1
OUTPUT_SBS=0
FRIMSOURCE=0
ENCODER=0
DGDECIM=0
TWEAK_PASS_ONE= --tune film
TWEAK_PASS_TWO= --tune film
DECODER=3
[Paths]
SOURCE_PATH=D:\IMPORTS\SANCTUARY_S3_D1\
DGIndexNV=C:\Program Files (x86)\dgdecnv\DGIndexNV.exe
DGDecNV=C:\Program Files (x86)\dgdecnv\DGDecodeNV.dll
WORKING_PATH=W:\SERIES\


47.07 extract.meta

MUXOPT --no-pcr-on-video-pid --new-audio-pes --blu-ray --vbr --custom-chapters=00:00:00.000;00:08:05.985;00:18:43.831;00:27:35.820;00:37:55.064;00:43:09.795;00:45:19.717 --vbv-len=500 --start-time=27000000
V_MPEG4/ISO/AVC, "I:\SANCTUARY SEASON 3\SANCTUARY_S3_D1\BDMV\PLAYLIST\00004.mpls",fps=23.976,contSPS,track=4113
A_DTS,"I:\SANCTUARY SEASON 3\SANCTUARY_S3_D1\BDMV\PLAYLIST\00004.mpls",lang=eng,track=4352
A_AC3,"I:\SANCTUARY SEASON 3\SANCTUARY_S3_D1\BDMV\PLAYLIST\00004.mpls",lang=fra,track=4353
A_AC3,"I:\SANCTUARY SEASON 3\SANCTUARY_S3_D1\BDMV\PLAYLIST\00004.mpls",lang=eng,track=4354
S_HDMV/PGS,"I:\SANCTUARY SEASON 3\SANCTUARY_S3_D1\BDMV\PLAYLIST\00004.mpls",fps=23.976,lang=eng,track=4608
S_HDMV/PGS,"I:\SANCTUARY SEASON 3\SANCTUARY_S3_D1\BDMV\PLAYLIST\00004.mpls",fps=23.976,lang=fra,track=4609


48.02 extract.meta

MUXOPT --no-pcr-on-video-pid --new-audio-pes --blu-ray --vbr --custom-chapters=00:00:00.000;00:08:05.985;00:18:43.831;00:27:35.820;00:37:55.064;00:43:09.795;00:45:19.717 --vbv-len=500 --start-time=27000000
V_MPEG4/ISO/AVC, "I:\SANCTUARY SEASON 3\SANCTUARY_S3_D1\BDMV\PLAYLIST\00004.mpls",fps=23.976,contSPS,track=4113


In 48.02 there is no mention of audio or subs in extract.meta

[jdobbs]

Possible bug with Import in 48.02

Sanctuary BD season 3 or 4
Importing the season discs with 48.02 results in an import folder with video only. Reverting to 47.07 and it imports fine

INI file is same for both versions. I'm looking at it. It's probably related to the code I added for filtering audio/subs during import.

[gonca]

Thank you for the response. No rush.

[jdobbs]

Thank you for the response. No rush.Ughh... this was a serious one that pretty much makes BD importing inoperable -- and it's caused by a silly line I added. I can't believe I didn't pick up on this in testing. Interesting that I did it right in the DVD section but really screwed-the-pooch in the BD import.

I'll put out an interim version in a short while that fixes this.

[gonca]

I can't believe I didn't pick up on this in testing.

How many lines of code is BD_RB up to now? ;)

[jdobbs]

How many lines of code is BD_RB up to now? ;)I haven't counted... but it's a lot.

[jdobbs]

I have updated the first post of this thread with a link to the most recent version of BD-RB (v0.48.03). Changes for this release:- Corrected an issue in which ALTERNATE output
to DVD was no longer working as of release of
v0.48.01 due to HC encoder issues associated
with the necessary FFVideoShow seek mode.
- Corrected an error that could prevent preview
from working when HAALI/FFDSHOW is not
installed and DGDecNV or FRIM is selected.
- Changed settings so FRIM is used for all
previews. This avoids the issue in which
attempting to preview with FFVideoSource can
pause for a long period while the source is
being indexed.
- Corrected an issue that could cause encoding
of 2D from 3D sources when using ALTERNATE
presets to fail.
- Added a workaround for incorrectly formatted
3D sources, having shortened M2TS files, that
are used for 2D ALTERNATE output.
- Fixed an error in the BD import routine that
removes audio and subtitle tracks during BD
import.
- Fixed an issue in which selecting LAVF as
the frame server could result in the chapter
file not being read and used for encoding.
- Other minor corrections and cosmetic fixes.

[gonca]

Thanks for the quick fix. Tested the BD import and the sound and subs are kept.

[HWK]

Jdobbs, couple of things I noticed with 0.48.03

1. Program still fails to create 2D backup of lego movie & It sees total size of movie 1.73 GB only.

2. Rebuilding phase get stuck and never finish.

{Status}
[Status]
LABEL=THE_LEGO_MOVIE_3D
VERSION=v0.48.03 (beta)
SOURCE_SIZE=1859256320
SOURCE_VIDEO_SIZE=1859256320
TARGET_SIZE=24641536000
REDUCTION=13.253436728939
RESIZE_1080=0
RESIZE_1440=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=all
BACKUP_MODE=1
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=0
DGDECIM=0
FRIMSOURCE=0
FFMS2=-1
SSIF_MODE=0
QUICK=0
ENCODE_STEP=0
COMPLETED=1
[00042]
USE_ORIGINAL=1
AUDIO=100000000
PGS=11111111100000000
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=24641536000
NSIZE=0
FLINK=0
MLINK=0


[08/28/14] BD Rebuilder v0.48.03 (beta)
[21:28:41] Source: THE_LEGO_MOVIE_3D_00098
- Input BD size: 1.73 GB
- Approximate total content: [01:40:35.320]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: FFVideoSource
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[21:28:42] PHASE ONE, Encoding
- [21:28:42] Processing: VID_00042 (1 of 1)
- [21:28:42] Extracting A/V streams [VID_00042]
- [21:30:44] Reencoding video [VID_00042]
- [21:30:44] Keeping original video (no reencode)
- [21:30:44] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[21:30:44]PHASE ONE complete
[21:30:44]PHASE TWO - Rebuild Started
- [21:30:44] Rebuilding BD file Structure

At this stage it hangs, doesn't do anything.

[08/28/14] Checking System Settings
- BD-Rebuilder v0.48.03 (beta)
- Windows Version: 6.1 [7601]
- Working Path Free Space: 455.33GB
- AVISYNTH Version: 2.5.8.0, Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
- FRIMEncode: Ok
- FRIMDecode: Ok
[08/28/14] Systems Settings Check complete


[update] It doesn't matter which method is chosen for frameserve, BD-RB still identify lego movie to be 1.73 GB when trying to backup 2D or alternate output. However if alternate output is enabled and IGNORE_3D=0 then alternate copy come in 2D and more importantly it is full version.

Also I notice in alternate output except DVD, BD-RB uses one pass encode even though I specifically chosen two pass option. I am thinking if frim can be launched twice with x264 it should be possible, like it does with HCencoder.

[jdobbs]

The fix is for ALTERNATE output. You selected 2-pass from the ALTERNATE dialog? The settings there are the only ones that matter for ALTERNATE encoding.

[Edit] I just tested ALTERNATE 2-pass encoding with LEGO 2 and it is working correctly.

[HWK]

The fix is for ALTERNATE output. You selected 2-pass from the ALTERNATE dialog?

[Edit] I just tested ALTERNATE 2-pass encoding with LEGO 2 and it is working correctly.

alternate output for dvd works fine with 2 pass and for mkv and ipad others it doesn't even though it is enabled. Also reminder frimsource is serving frame.

Also when I enable option process 3D as 2D, file size is not correct for input of BD-RB. It reports 1.73GB and both 2d backup and alternate fail.

[jdobbs]

alternate output for dvd works fine with 2 pass and for mkv and ipad others it doesn't even though it is enabled. Also reminder frimsource is serving frame.Are you sure you have your settings configured correctly? I tested it with other ALTERNATE presets as well and it works correctly (doing 2 passes).

FRIMSource is used because of the requirement to read from the SSIF on that source (since the M2TS is a runt that doesn't include the entire movie). FFVideoSource and DGDecNV both fail to index the SSIF.

[HWK]

I tested it with other ALTERNATE presets as well and it works correctly.

How are you serving frame? I am using frim and wonder if it has to do anything?

[update] I see you are using frim as well. I will do some more checking on that.

SO far what I know is frim is feeding frames to both encoder. DVD output works in alternate with 2 pass, however no matter what I do x264 is using crf, no matter what option I have chosen.

[jdobbs]

Not on my system. FRIM is used on that title because it is illegally formatted and it has to be to use the SSIF. It isn't necessarily used on others. See below:[08/28/14] BD Rebuilder v0.48.03 (beta)
[21:20:15] Source: LEGO_MOVIE_3D_00098
- Input BD size: 32.56 GB
- Approximate total content: [01:40:35.320]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Quality: High Quality (Default), ABR
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[21:20:18] PHASE ONE, Encoding
- [21:20:18] Processing: VID_00042 (1 of 1)
- [21:20:18] Extracting A/V streams [VID_00042]
- [21:25:53] Reencoding video [VID_00042]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 144,703 frames
- Bitrate: 1,230 Kbs
- [21:25:53] Reencoding: VID_00042, Pass 1 of 2Notice it is doing the first of two passes...

I tried it and it works correctly with both the bitrate and target size 2-pass options.

I haven't worked on any code to do 2D from a 3D to a regular movie-only backup on illegally formatted 3D sources. So I can't say what will happen there... I'll test it. If there is a problem I'll fix it in a future version.

[Edit] Yeah. Clicking on the 3D to 2D checkbox in SETUP makes it recognize only the M2TS on that disc. That's something for another day... like I said before, the problem isn't BD-RB... it is the illegally structured disc by the BD standard. In the meantime you can always output to an MKV using intact video/audio -- and then import the MKV back in to create a 2D version.

[omegaman7]

It's probably my fault JD lol. Whenever I download the newest version, a bug is found, that requires immediate attention lol. Perhaps I should wait on 4803 :S

[jdobbs]

I hope you don't. I prefer problems are found immediately. I do testing before posting -- but BD-RB has gotten to a point where there are so many options and interdependencies that I just can't test them all. That's when I rely on people like you.

[omegaman7]

I was just teasing ;) I have this way of hexing things lol.

[Capsbackup]

@jdobbs,
BD Rebuilder v0.48.03 (beta) has fixed the BD to DVD issue using FFVideoSource. Thanks! :D
However, something I now notice that did not occur with releases prior to 48.03.

By selecting either DirectShow and FFVideoSource, the BD to DVD conversion now does a 2 pass encode.

The finished file size of the DVD, using either DirectShow or FFVideoSource, is quite a bit larger than using 48.02 or prior releases, even though the bitrate is identical!
(Bitrate: 8,552 Kbs) :confused:

Both tests, DirectShow or FFVideoSource, using 48.03 turn out 3.46GB.
Using DirectShow with 48.02; 2.78GB.
DVD9 was the selected preset.

I'm not sure why or how, using the same source, and all three tests select the same bitrate, there can be such a discrepancy.
Since I am not sure that this is even a bug, I felt the need to report my findings. I have done quite a few of these over the last year, and the resulting DVD's have always been consistently comparable with the versions prior to and including 48.02.

----------------------
[08/29/14] BD Rebuilder v0.48.02 (beta)
[10:08:01] Source: TRUE_BLOOD_SEASON_7_EPISODE_9_00000
- Input BD size: 2.31 GB
- Approximate total content: [00:58:15.679]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: DVD-9, 720x480/576, AC3 Audio
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[10:08:01] PHASE ONE, Encoding
- [10:08:01] Processing: VID_00000 (1 of 1)
- [10:08:01] Extracting A/V streams [VID_00000]
- [10:09:35] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 83,813 frames
- Bitrate: 8,552 Kbs
- [10:09:35] Reencoding: VID_00000
- [10:47:03] Video Encode complete
- [10:47:03] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[10:47:06]PHASE ONE complete
[10:47:06]PHASE TWO - Rebuild Started
- [10:47:06] Building ALTERNATE OUTPUT Structure
- [10:47:06] Converting 1 subtitles to DVD format.
- [10:48:22] Starting MPLEX.
- [10:48:58] Multiplexing 1 subtitles into stream.
- [10:49:33] Building DVD File Structure.
[10:50:35] - Encode and Rebuild complete
[10:50:35] JOB: TRUE_BLOOD_SEASON_7_EPISODE_9 finished.

----------------------
[08/29/14] BD Rebuilder v0.48.03 (beta)
[08:48:00] Source: TRUE_BLOOD_SEASON_7_EPISODE_9_00000
- Input BD size: 2.31 GB
- Approximate total content: [00:58:15.679]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: DVD-9, 720x480/576, AC3 Audio
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[08:48:00] PHASE ONE, Encoding
- [08:48:00] Processing: VID_00000 (1 of 1)
- [08:48:00] Extracting A/V streams [VID_00000]
- [08:49:33] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 83,813 frames
- Bitrate: 8,552 Kbs
- [08:49:33] Reencoding: VID_00000
- [09:20:47] Video Encode complete
- [09:20:47] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[09:20:50]PHASE ONE complete
[09:20:50]PHASE TWO - Rebuild Started
- [09:20:50] Building ALTERNATE OUTPUT Structure
- [09:20:50] Converting 1 subtitles to DVD format.
- [09:22:05] Starting MPLEX.
- [09:22:50] Multiplexing 1 subtitles into stream.
- [09:23:32] Building DVD File Structure.
[09:24:49] - Encode and Rebuild complete
[09:24:49] JOB: TRUE_BLOOD_SEASON_7_EPISODE_9 finished.

----------------------
[08/29/14] BD Rebuilder v0.48.03 (beta)
[06:58:05] Source: TRUE_BLOOD_SEASON_7_EPISODE_9_00000
- Input BD size: 2.31 GB
- Approximate total content: [00:58:15.679]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: DVD-9, 720x480/576, AC3 Audio
- Decoding/Frame serving: FFVideoSource
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[06:58:05] PHASE ONE, Encoding
- [06:58:05] Processing: VID_00000 (1 of 1)
- [06:58:05] Extracting A/V streams [VID_00000]
- [06:59:13] Reencoding video [VID_00000]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 83,813 frames
- Bitrate: 8,552 Kbs
- [06:59:13] Reencoding: VID_00000
- [07:28:37] Video Encode complete
- [07:28:37] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[07:28:40]PHASE ONE complete
[07:28:40]PHASE TWO - Rebuild Started
- [07:28:40] Building ALTERNATE OUTPUT Structure
- [07:28:40] Converting 1 subtitles to DVD format.
- [07:29:50] Starting MPLEX.
- [07:30:38] Multiplexing 1 subtitles into stream.
- [07:31:35] Building DVD File Structure.
[07:32:50] - Encode and Rebuild complete
[07:32:50] JOB: TRUE_BLOOD_SEASON_7_EPISODE_9 finished.

[jdobbs]

It always did a 2 pass encode, I just changed the way it is presented to better reflect it. In previous versions the 2nd pass started at 50%...

Since you have DVD-9 selected and are getting a size much smaller, it is likely that the maximum Q is being reached and the extra bitrate can't be used, so the fact that the specified bitrate is the same is really inconsequential. The difference is size is likely due to the fact that I regressed the version of HCENCODER. For some reason the lastest version lost the *AVSRELOAD capability. That was the root of the problem that had to be fixed in v0.48.03 when used with FFVideoSource. The quality of the output will shouldn't be affected by the regression, the only differences between the HC versions are some additional options that aren't used in BD-RB and the removal of *AVSRELOAD.

[mparade]

Just got this error message while using FFVideoSource.
After changing back to DirectShow the problem was solved.

----------------------
[08.29.14] BD Rebuilder v0.48.03 (beta)
[21:13:00] Source: MONSTERS_INC
- Input BD size: 0,21 GB
- Approximate total content: [03:08:10.362]
- Target BD size: 46,26 GB
- Windows Version: 6.1 [7601]
- MOVIE and MENUS mode enabled
- Resize: SD to HD 1080 enabled
- Quality: Ultra High Quality (Extremely Slow), CRF
- Output folder: E:\BD-RB\
- Decoding/Frame serving: FFVideoSource
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[21:13:00] PHASE ONE, Encoding
- [21:13:01] Blanking: VID_00045 (66 of 95)
- [21:13:01] Processing: VID_00031 (67 of 95)
- [21:13:01] Extracting A/V streams [VID_00031]
- [21:13:18] CreateAVS() 00000
[21:13:26] - Could not create AVS file

[jdobbs]

Just got this error message while using FFVideoSource.
After changing back to DirectShow the problem was solved.

----------------------
[08.29.14] BD Rebuilder v0.48.03 (beta)
[21:13:00] Source: MONSTERS_INC
- Input BD size: 0,21 GB
- Approximate total content: [03:08:10.362]
- Target BD size: 46,26 GB
- Windows Version: 6.1 [7601]
- MOVIE and MENUS mode enabled
- Resize: SD to HD 1080 enabled
- Quality: Ultra High Quality (Extremely Slow), CRF
- Output folder: E:\BD-RB\
- Decoding/Frame serving: FFVideoSource
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[21:13:00] PHASE ONE, Encoding
- [21:13:01] Blanking: VID_00045 (66 of 95)
- [21:13:01] Processing: VID_00031 (67 of 95)
- [21:13:01] Extracting A/V streams [VID_00031]
- [21:13:18] CreateAVS() 00000
[21:13:26] - Could not create AVS fileI'm confused. 67 of 95? Did you edit out 1-65? I understand if you did, as it would be ridiculously long, but I just want to be sure.

It has to be some syntax error in an area rarely hit to die in that routine... I wish I had more to go on.

[gonca]

jdobbs

My imagination or did the input size read as 0.21 GB?

[jdobbs]

jdobbs

My imagination or did the input size read as 0.21 GB?Looks like it to me. Something is wrong. But if it worked with DirectshowSource is should work with FFVideoSource.

[mparade]

I'm confused. 67 of 95? Did you edit out 1-65? I understand if you did, as it would be ridiculously long, but I just want to be sure.

It has to be some syntax error in an area rarely hit to die in that routine... I wish I had more to go on.


Yes, I did. I was in edit mode just for testing purposes.

Here are some additional information I got from BD-RB:

"Couldn't open input file in HIDE mode!" error window appeared during"completing remainder of indexing.."

"BD Rebuilder experienced an error Create AVS () 00000" error condition window appeared.

"special" hidden options were in use:

IVTC_SELECTION=1
IVTC_TELECIDE=1

The source is hard telecined.

I hope these help.

[brunchto]

Hi,

I've an error with ffmsindex.exe. with "The matrix".

encoding seems ok (mkv ok), but, i've got this error:

http://syno.dupuy.nom.fr/public/errfrim.png

streams are VC1, iso mounted for network share

[11:28:38] BD Rebuilder v0.48.03 (beta)
[11:28:38] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[11:28:38] PROCESSING BATCH FILE [127]
----------------------
[08/31/14] BD Rebuilder v0.48.03 (beta)
[11:28:39] Source: THE_MATRIX_00000
- Input BD size: 26,49 GB
- Approximate total content: [02:16:17.961]
- Windows Version: 6.2 [9200]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV, Intact Video, Intact Audio
- Decoding/Frame serving: FFVideoSource
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[11:28:39] PHASE ONE, Encoding
- [11:28:39] Processing: VID_00000 (1 of 1)
- [11:28:39] Extracting A/V streams [VID_00000]
- [11:42:50] Reencoding video [VID_00000]
- [11:42:50] Keeping original video (no reencode)
- [11:42:50] Processing audio tracks
- Track 4354 (fra): Keeping original audio
[11:42:50]PHASE ONE complete
[11:42:50]PHASE TWO - Rebuild Started
- [11:42:53] Building ALTERNATE OUTPUT Structure
[11:50:03] - Encode and Rebuild complete
- WORKFILES folder removed.
[11:50:03] JOB: THE_MATRIX finished.

in addition (not related), the last time i tried, there where a problem with batch backup and angle selection.
http://forum.doom9.org/showthread.php?p=1682228#post1682228
angle selection works in direct backup, but not in batch (not stored in MAIN_MPLS_ANGLE which stays =0) .

bruno

[jdobbs]

@brunchto

Interesting... I have "The Matrix" so I tried it. The reason it doesn't affect the output is because you have "Intact Video" selected and FFVideoSource is never actually used. I'll look and see what I can find as to why ffmsindex.exe is crashing on that title. I ran it from the command line and get no indication other than the O/S "crash" popup.

I'll look at the referenced batch problem.

[Edit] By increasing the verbosity level of ffmsindex.exe I am now at least getting some error messages -- it seems to be related to one or more of the subtitles in the stream.

[andref4]

Cloudy 2 3D full Backup works now with 0.48.02!!

I have backuped the complete cloudy 2 3D Blu-Ray to HDD (over 60GB because ssif Folder) and did a full backup from HDD and not from the Blu-Ray.
And now the backup works and after 7:34min the german intro starts!

The only thing I don't understand is:

if I make a full 3D BD25 backup with bd-rebuilder from the original Blu-Ray or mounted iso, bd-reb encodes 5 Videos and the movie crashes after 7:34min.
if I make a full 3D BD25 backup from the "Cloudy 2" Folder on HDD, bd-reb encodes 6 Videos and the movie plays fine and starts with the german Intro after 7:34min.

regards

[brunchto]

[Edit] By increasing the verbosity level of ffmsindex.exe I am now at least getting some error messages -- it seems to be related to one or more of the subtitles in the stream.

I've tested with re-encoding (to 1280mkv) and i've an error on encoding with FFsource. re-encoding seems to work if i select frim.

[Ch3vr0n]

Previewing doesn't work (on MPEG-4 (AVC) streams). Disc: Divergent
Error:

LoadPlugin: unable to load "C:\Program Files (x86)\BD_Rebuilder\tools\fromsource.dll"
(C:\Temp\WORKFILES\MPC_VIEW.AVS, line 2)

Works fine using 48.02

[jdobbs]

Previewing doesn't work (on MPEG-4 (AVC) streams). Disc: Divergent
Error:

LoadPlugin: unable to load "C:\Program Files (x86)\BD_Rebuilder\tools\fromsource.dll"
(C:\Temp\WORKFILES\MPC_VIEW.AVS, line 2)

Works fine using 48.02I just tried an AVC stream on my system and it previewed fine? It didn't really say "fromsource" did it? I just looked through the code and couldn't find that anywhere.

[Ch3vr0n]

well it refuses on my end with 48.03 nothing changed except replacing the folder contents with that of the zip by copy/paste&replace. Copying the folder to like C:\ root doesn't help. Same trying a different ISO. Same thing reading directly from optical drive. Swap to 48.02. Problem solved on both iso reading and optical drive.

[jdobbs]

Look in the "tools" folder and see if "frimsource.dll" exists.

[jdobbs]

I just tried an AVC stream on my system and it previewed fine? It didn't really say "fromsource" did it? I just looked through the code and couldn't find that anywhere.Can someone else please confirm that previewing of AVC sources works on their system with v0.48.03?

[jdobbs]

well it refuses on my end with 48.03 nothing changed except replacing the folder contents with that of the zip by copy/paste&replace. Copying the folder to like C:\ root doesn't help. Same trying a different ISO. Same thing reading directly from optical drive. Swap to 48.02. Problem solved on both iso reading and optical drive.Is it possible you have another version of libmfxsw32.dll in your path somewhere?

[Sharc]

Can someone else please confirm that previewing of AVC sources works on their system with v0.48.03?
No problem with preview here with v0.48.03.

Edit:
Oooops, I just tried again, and strange enough:
- Previewing from the Quick-Play Menu Title Editor is smooth
- Previewing from the Stream Tab in the main window starts, then gets gradually choppy (dropping frames until almost no frame updates happen) .

Edit2:
It's the MPC_View.avs using frimsource which makes the problem
The preview.avs using directshowsource is ok.

[omegaman7]

Finally downloaded 4803. Chose Cabin in the woods as random. Attempted to preview very first (00001) video. "File not found." At least I think that's what it said. I cannot repeat the problem, because I attempted the same video on 4802, and it worked. And now 4803 works every time :S VERY weird...

[Ch3vr0n]

Is it possible you have another version of libmfxsw32.dll in your path somewhere?

my path somewhere? What path? Where? Never heard of that dll file till now. Inspect.exe reports everything as ok. I didn't change anything, only replaced existing content.

[09/01/14] Checking System Settings
- BD-Rebuilder v0.48.03 (beta)
- Windows Version: 6.0 [6002]
- Working Path Free Space: 244,94GB
- AVISYNTH Version: 2.5.8.0, Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
- FRIMEncode: Ok
- FRIMDecode: Ok
[09/01/14] Systems Settings Check complete

and looks like i'm not the only one with the issue. The weird thing is that their is a 10sec "timer" that progresses, there's just no video except that error message

[CV91913]

Can someone else please confirm that previewing of AVC sources works on their system with v0.48.03?
Works fine on 48.03 on my Win 7 64 system. Don't know if the OS version matters but the problem system seems to be running an older version of Windows.

[jdobbs]

I may have to reconsider this whole thing and go back to Directshow as the default. Too bad. A large percentage of all the BD-RB issues reported are due to other software interfering with or intercepting Directshow, and the problems go away with re-installation of HAALI and FFDSHOW... and I could have made an install package that is independent of any other installations.

I'll spend some more time trying to work out the FFVideoSource() issues and then decide on future direction.

@CV91913

I'll do some checking, but now that you mention it I think I remember that there is a minimum O/S version required by FRIMSource. I'll have to check it.

[Ch3vr0n]

Well it's not like vista is that old compared to xp

Verstuurd vanaf mijn Nexus 7 met Tapatalk

[jdobbs]

I just looked it up... the Intel SDK requires Windows 7 or above...

Ughhh... the only other choices for previewing is either Directshow or FFVideoSource (which requires indexing that takes quite a while for a decent sized M2TS).

[Sharc]

I am on Windows 7/64 but nevertheless the preview is choppy and frame updates eventually stop.

Could DGAVCIndex be used for a simple video preview (without script)?

[jdobbs]

I am on Windows 7/64 but nevertheless the preview is choppy and frame updates eventually stop.

Could DGAVCIndex be used for a simple video preview (without script)?No. It requires indexing as well.

[Sharc]

No. It requires indexing as well.
Really? When I open a large .m2ts in DGAVCIndex.exe I can preview it immediately without prior indexing ....:confused:
The limitation may rather be that DGAVCIndex.exe does not decode VC-1 (unlike DGIndexNV.exe)

[Ch3vr0n]

don't take this as a personal "attack" jdobbs, but shouldn't you have known that? It's the same intel SDK that prevents 3D rebuilding on vista too because FRIM makes use of the intelSDK too, which it can't due to missing certain reference points in a system DLL or something. Anyway is that related to my preview issue?

[jdobbs]

Really? When I open a large .m2ts in DGAVCIndex.exe I can preview it immediately without prior indexing ....:confused:
The limitation may rather be that DGAVCIndex.exe does not decode VC-1 (unlike DGIndexNV.exe)Actually I was thinking of DGDecNV. I assumed DGAVCIndex worked the same way. Of course with that one, as you mentioned, can't do VC-1.

[jdobbs]

don't take this as a personal "attack" jdobbs, but shouldn't you have known that? It's the same intel SDK that prevents 3D rebuilding on vista too because FRIM makes use of the intelSDK too, which it can't due to missing certain reference points in a system DLL or something. Anyway is that related to my preview issue?Yes I did know it, and have mentioned it in the very thread before. If I had a perfect memory it wouldn't have been an issue.

Yes. It is your preview problem.

I'm contemplating my next course of action. I'll probably require FFDSHOW and HAALI for full functionality, but still allow the program to work if they aren't installed.

[Ch3vr0n]

No worries, so I assume my issue is related to that 'default' change you made? Can it be fixed?

Verstuurd vanaf mijn Nexus 7 met Tapatalk

[jdobbs]

No worries, so I assume my issue is related to that 'default' change you made? Can it be fixed?

Verstuurd vanaf mijn Nexus 7 met TapatalkNext release. In the meantime you could revert to a previous version.