BD Rebuilder Beta - Bug Reports Only

[Weirdo]

Sorry. But that is a preprocessed disc. I do not respond to reports on preprocessed discs. There's no way to tell what has happened to the disc before BD-RB encounters it. In my experience virtually all problems reported under these circumstances have gone away when reverting to the original.
Fair enough. I thought since 2-pass mode worked fine this couldn't have been an issue. Keep up the great work.

[Sharc]

Not sure. I'm working on it now.
No rush; just good to know that you have not deleted it from your agenda. Thanks. :)

[Jackie Treehorn]

Sounds a lot like a problem I had once upon a time. I would get a stuck frame at the exact same spot. Audio would continue. Ripped with a new LG drive, problem gone.

Ordered a new drive! Hoping that's it... thanks.

[AmigaFuture]

I refuse to throw away a working-ish drive ;)

Yeppers! I've been there, haaahaa! I had a huge collection of drives. Just because a Write Chip stop functioning the Read chip is doing fine... I found that; there is a point to where enough is enough, evolution IS a good thing. Snicker, except for Cinavia. I own some older BD players now. I don't care enough about 3D and all the Netflix and YouTube programs the new players have. My Computer handles all that.

As for the DivX/XviD..mmmm, I hadn't even considered that with all the iPhone, BD, and MKV from BD testing I've been doing.

Which leads into a question...I wondered before. When I ripped my "Hunger Games" (first movie) a while ago, with Menus but (personally selected) Extras blanked, that produced a BD which doesn't have jitters like the original disc. JD, have you...or....is there a way to fix that? I, remember reading on the AnyDVD (HD) fora that it has something to do the the Copy Protection being removed...I Think! It's been a while. Is BD-RB and the new TsMuxer able to, repair (I guess?) that??
I know it affects all movies broken into multi-parts which is why I use MKV for those. It would be sweet to use my disc backup that has the original menus. Thanks.

[colinhunt]

That feeling when you spend quite a lot of money to upgrade both Xeon CPUs of your current encoding rig... only to realize that your much cheaper rig encodes MVC at 10x the speed of your dual-Xeon, thanks to Intel QuickSync.

;D

[Jackie Treehorn]

Ordered a new drive! Hoping that's it... thanks.

That was it! Thanks for the heads up... I could have gone crazy trying to figure that out....

[omegaman7]

That was it! Thanks for the heads up... I could have gone crazy trying to figure that out....

Out of curiosity, was it a lite-on drive? :devil:

I shouldn't talk though. One of my LG's quit burning reliably, fairly early on. Still reads good though.

[jdobbs]

Out of curiosity, was it a lite-on drive? :devil:

I shouldn't talk though. One of my LG's quit burning reliably, fairly early on. Still reads good though.I'm on my 3rd LG Drive in the last 3 years. Admittedly there is probably no user who give a drive more stress... but 3 drives? Unfortunately my local choice is limited to LG. On this last one I bought the extended warranty. Best Buy is going to have to buy my next one.

[omegaman7]

I'm on my 3rd LG Drive in the last 3 years. Admittedly there is probably no user who give a drive more stress... but 3 drives? Unfortunately my local choice is limited to LG. On this last one I bought the extended warranty. Best Buy is going to have to buy my next one.

I recall purchasing a warranty on the WH12LS39. It's not showing in the purchase history. But it's been over 2yrs. Perhaps that's why. In any case, I got my moneys worth :) Oddly, I seem to recall it being a 3yr warranty :S If they were the typical price of a DVD drive, I wouldn't worry about it. But they're not ;)

Oh, I see. I bought the warranty through a third party :)

[Jackie Treehorn]

Out of curiosity, was it a lite-on drive?

Nah, Pioneer. I too got my $s worth!

[jdobbs]

I'm on my 3rd LG Drive in the last 3 years. Admittedly there is probably no user who give a drive more stress... but 3 drives? Unfortunately my local choice is limited to LG. On this last one I bought the extended warranty. Best Buy is going to have to buy my next one.I recall purchasing a warranty on the WH12LS39. It's not showing in the purchase history. But it's been over 2yrs. Perhaps that's why. In any case, I got my moneys worth :) Oddly, I seem to recall it being a 3yr warranty :S If they were the typical price of a DVD drive, I wouldn't worry about it. But they're not ;)

Oh, I see. I bought the warranty through a third party :)So much for my memory... after looking for my receipt to see how long the warranty lasts -- it turns out I bought it at Micro Center, not Best Buy... :o

[colinhunt]

Back in November I noticed that "BAIT 3D" had its left and right views swapped on the original Blu-ray. Earlier today I ran a normal 3D backup of it, i.e. I did not use SWAP_3D=1 in the .INI file. Views were swapped in the backup too, no surprise there.

I then ran another backup, this time with SWAP_3D=1 in the .INI. But the views are still swapped in the backup. Has anyone else tested hidden option "SWAP_3D=1"?

[jdobbs]

Back in November I noticed that "BAIT 3D" had its left and right views swapped on the original Blu-ray. Earlier today I ran a normal 3D backup of it, i.e. I did not use SWAP_3D=1 in the .INI file. Views were swapped in the backup too, no surprise there.

I then ran another backup, this time with SWAP_3D=1 in the .INI. But the views are still swapped in the backup. Has anyone else tested hidden option "SWAP_3D=1"?SWAP_3D only applies to SBS output. When I added it that was all that BD-RB supported. I'll look at applying it to other backups as well. I'll also look at detecting and applying automatically for sources that have the right view in the AVC portion as opposed to the left view.

I have the full 3D backups and non-ISO movie-only backups working now. I caught some issues in the testing that delayed it a few days. I'll do just a couple more tests and release it (probably tomorrow).

[Ch3vr0n]

awesome

[colinhunt]

SWAP_3D only applies to SBS output.
Ah sorry, my bad :/

[jdobbs]

Ah sorry, my bad :/My fault. It's not documented very well in HIDDENOPTS.TXT (because it was put there before true 3D support) -- so you can't really tell.

[DMagic1]

I have the full 3D backups and non-ISO movie-only backups working now. I caught some issues in the testing that delayed it a few days. I'll do just a couple more tests and release it (probably tomorrow).

Excellent news, I've been looking every day for it. :)

Btw, will it support removing audio tracks and/or extras?

Also I noticed in movie only mode forced subtitles didn't play forced. Is that a know issue to be working in full 3d backup mode?

[AmigaFuture]

Hello,

A possible bug?

----------------------
[19:17:38] Importing MKV: DIE_HARD_4
- Collecting audio/video streams from source...
- Building pseudo-BD source structure...
- Source issue found, attempting correction...
[19:29:22] Video import aborted per user request.
----------------------
[19:30:04] Importing MKV: DIE_HARD_4
- Collecting audio/video streams from source...
- Building pseudo-BD source structure...
[19:51:50] Video import completed successfully.

While testing to reduce MKV size, the first test was from my USB HDD with SRT within the MKV. Second was after I used to MKVMERE GUI to Remux without SRT within MKV container. I've done this with a few BD-RB Outputs. If I let the first process, it will do it. Maybe add a way for BD-Rb to detect *.SRT within MKV container?

Thanks.

[jdobbs]

Excellent news, I've been looking every day for it. :)

Btw, will it support removing audio tracks and/or extras?

Also I noticed in movie only mode forced subtitles didn't play forced. Is that a know issue to be working in full 3d backup mode?On a movie-only backup forced subtitles are pulled into a PGS stream of their own and that stream is defaulted to "on". The only way it isn't is if you have selected a different stream as "on" by default.

[jdobbs]

Hello,

A possible bug?

----------------------
[19:17:38] Importing MKV: DIE_HARD_4
- Collecting audio/video streams from source...
- Building pseudo-BD source structure...
- Source issue found, attempting correction...
[19:29:22] Video import aborted per user request.
----------------------
[19:30:04] Importing MKV: DIE_HARD_4
- Collecting audio/video streams from source...
- Building pseudo-BD source structure...
[19:51:50] Video import completed successfully.

While testing to reduce MKV size, the first test was from my USB HDD with SRT within the MKV. Second was after I used to MKVMERE GUI to Remux without SRT within MKV container. I've done this with a few BD-RB Outputs. If I let the first process, it will do it. Maybe add a way for BD-Rb to detect *.SRT within MKV container?

Thanks.It should detect them already, and they are converted into a PGS when the stream is imported. I'll take a look at it.

[rusty666]

are we going to be able to do full back up with sbs aswell?

[jdobbs]

are we going to be able to do full back up with sbs aswell?Not now, but maybe in a future version. You will be able to do a BD-3D backup from a SBS MKV or MP4 source, though.

[rusty666]

thanx for the reply i hope you can. but im waiting to try the 3d iso full backup will it be out today. and i will be donating alittle of what i can when i get paid in the next 2 week . thanx for your work. one last thing will we be able to run it trough fast bd encodeing 2 pass?

[rusty666]

i already did a 3d-bd backup with the version that is out now i just imported mkv and selected br and it set it to 1080p works fine on my player

[jdobbs]

i already did a 3d-bd backup with the version that is out now i just imported mkv and selected br and it set it to 1080p works fine on my playerYes. It already worked for movie-only 3D backups. But now you will be able to output to a file structure, not just an ISO -- and also do full backups.

[jdobbs]

This link points to a new release of BD Rebuilder (v0.47.02). I am putting the link here, rather than updating the first post and the website because it involves extensive changes and I'd like to get some feedback on the new 3D capabilities from beta testers before making it available to a larger audience. Changes for this release:- Implemented 3D Full Backup Mode. Note that
BD-RB converts 3D method so that the SSIF
folder is no longer required -- the method
is 100% compliant with the BD standard.
- Due to the changes in the way 3D is handled,
BD-RB no longer outputs to ISO by default on
movie-only 3D encodes. It can be enabled by
using the OUTPUT_3D_ISO hidden option. Note:
This option only applies to movie-only 3D
encodes.
- Added 3D support to Quick-Play reauthoring.
- Corrected an error in which AnyDVD selected
feature playlists might sometimes not be
given the proper priority for selection as
the disc feature.
- Added a new hidden option IMPORT_PAL_TO_FILM
which, when set to "1" sets information so
that imported video files at 25fps sources
are converted to 23.976 and the audio is
adjusted during reencoding (not import).
- Fixed an issue related to possible MPLS and
CLPI version number mismatches when doing a
full backup from imported DVDs that could
make them unplayable on certain players.
- Corrected an issue in Quick-Play reauthoring
in which the STN_table was not being updated
properly when certain types of playitems and
subplayitems were discarded.
- Updated FRIMEncode/Decode and FRIMSource to
the most recent release (v1.23).
- Updated the included version of X264.EXE to the
latest release (r2409).
- Updated the included version of X264-64.EXE to
the latest release (r2409).
- Other minor corrections and cosmetic fixes.

The posted ZIP file for v0.47.02 was missing some files... this post (http://forum.doom9.org/showthread.php?p=1675469#post1675469) has an updated download.

[rusty666]

thanx im gonna try it out now with 3d-bd full back up bd25

[Ch3vr0n]

nice, i'll have a reason to use my w7 dualboot now lol with 3D encodes. Will defo be testing it out. and got just the movies to try it on top gun ftw (and others) aint got a 3D standalone setup but do have a 3D pc monitor so pdvd will have to suffice as testing :)

[rusty666]

[03/29/14] BD Rebuilder v0.47.02 (beta)
[15:48:35] Source: HOBBIT_DESOLATION_OF_SMAUG_P1
- Input BD size: 26.45 GB
- Approximate total content: [01:35:03.948]
- Target BD size: 46.26 GB
- Windows Version: 6.2 [9200]
- Quality: High-Speed Option (BD-25+), ABR
- MVC 3D Output Mode enabled
- Decoding/Frame serving: FRIMDecode
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[15:48:37] PHASE ONE, Encoding
- [15:48:37] Processing: VID_00006 (1 of 3)
- [15:48:37] Extracting A/V streams [VID_00006]
[15:48:56]PHASE ONE aborted by user request
----------------------
[03/29/14] BD Rebuilder v0.47.02 (beta)
[15:49:08] Source: HOBBIT_DESOLATION_OF_SMAUG_P1
- Input BD size: 26.45 GB
- Approximate total content: [01:35:03.948]
- Target BD size: 23.93 GB
- Windows Version: 6.2 [9200]
- Quality: High-Speed Option (BD-25+), ABR
- MVC 3D Output Mode enabled
- Decoding/Frame serving: FRIMDecode
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[15:49:09] PHASE ONE, Encoding
- [15:49:09] Processing: VID_00006 (1 of 3)
- [15:49:09] Extracting A/V streams [VID_00006]
- [15:58:19] Reencoding video [VID_00006]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 108,168 frames
- Bitrate: 33,882 Kbs
- Using FRIMEncoder for MVC encoding
- [15:58:19] Reencoding: VID_00006, Pass 1 of 1
[15:58:19] - Failed video encode, aborted
----------------------
[03/29/14] BD Rebuilder v0.47.02 (beta)
[15:59:02] Source: HOBBIT_DESOLATION_OF_SMAUG_P1
- Input BD size: 26.45 GB
- Approximate total content: [01:35:03.948]
- Target BD size: 23.93 GB
- Windows Version: 6.2 [9200]
- Quality: High-Speed Option (BD-25+), ABR
- MVC 3D Output Mode enabled
- Decoding/Frame serving: FRIMDecode
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[15:59:03] PHASE ONE, Encoding
- [15:59:03] Processing: VID_00006 (1 of 3)
- [15:59:03] Extracting A/V streams [VID_00006]
- [16:08:45] Reencoding video [VID_00006]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 108,168 frames
- Bitrate: 33,882 Kbs
- Using FRIMEncoder for MVC encoding
- [16:08:45] Reencoding: VID_00006, Pass 1 of 1
[16:08:45] - Failed video encode, aborted

[jdobbs]

@rusty666

Can you try it on another disc so I can see if it is that one in particular or something in your setup? I don't want to have to buy discs unless it is absolutely necessary. Have you forced FRIM's hw mode? If so, see what happens with sw.

Also, can you post your settings (contents of BDREBUILDER.INI)?

[rusty666]

i just used virtual clone on the iso

[rusty666]

thats how i been doing the other . mounting the iso

[rusty666]

how do i post the setting screen?

[Capsbackup]

[03/29/14] BD Rebuilder v0.47.02 (beta)
[15:48:35] Source: HOBBIT_DESOLATION_OF_SMAUG_P1
- Input BD size: 26.45 GB
- Approximate total content: [01:35:03.948]
- Target BD size: 46.26 GB
- Windows Version: 6.2 [9200]
- Quality: High-Speed Option (BD-25+), ABR
- MVC 3D Output Mode enabled
- Decoding/Frame serving: FRIMDecode
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[15:48:37] PHASE ONE, Encoding
- [15:48:37] Processing: VID_00006 (1 of 3)
- [15:48:37] Extracting A/V streams [VID_00006]
[15:48:56]PHASE ONE aborted by user request


Since this movie has not been released yet in the US, did the authoring company make it two discs, P1 and P2 or was this done by another software? :confused:

[rusty666]

it is 2 discs

[rusty666]

and how top i force FRIMS?

[Capsbackup]

it is 2 discs

Where did the original come from? Release dates say April 8, 2014.

[rusty666]

i think it region b

[Capsbackup]

i think it region b

Interesting! My searches show 4-8-14 for that release date too. :(
Looking forward to seeing this movie though! :cool:

[rusty666]

how to i use frim hw?

[rusty666]

i just tried wolverine and thats the same yet i done a movie only 3d-25 with that other the other version

[jdobbs]

I suspect something is wrong with your setup that is causing FRIMEncode to fail. Open up the file "BDREBUILDER.INI" located in the same folder as the executable (with notepad). Just cut-and-paste the contents into a post on the forum so I can see your settings. Also click on "Inspect" from BD-RB's help menu and cut-and-paste those results as well.

This release included a new version of FRIMEncode. It is working fine on my computer, but you never know if there may be something that causes issues on others. Let's see if anyone else experiences this problem.

[rusty666]

[Options]
VERSION=0.47.0.2
MODE=3
ENCODE_QUALITY=5
ONEPASS_ENCODING=0
AUTO_QUALITY=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=24500
TARGET_SIZE=24500
MENU_BACKGROUND=C:\Users\nail\Desktop\BD_Rebuilder\misc\menuback.jpg
IMPORT_THRESHOLD=15
QUICK_PLAY_THRESHOLD=10
MENU_AUTO_BACKGROUND=1
MENU_PLAY_SEQUENTIAL=0
MENU_START_WITH_MENU=1
[Paths]
WORKING_PATH=C:\USERS\NAIL\VIDEOS\BDREBUILDER\
SOURCE_PATH=F:\

[rusty666]

BD-Rebuilder v0.47.02 (beta)
- Windows Version: 6.2 [9200]
- Working Path Free Space: 2,459.74GB
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 4504, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- WAVI: Ok
- TSMUXER: Ok
[03/29/14] Systems Settings Check complete

[jdobbs]

There is an issue with the zip file I posted. It appears that somehow FRIMEncode and FRIMDecode are missing from the TOOLs folder of the zip file. I'll check for other inconsistencies and update the link.

[rusty666]

thanx im looking forward to doing a full 3d backup

[colinhunt]

Where did the original come from? Release dates say April 8, 2014.
Hobbit part 2 Blu-ray has not been released anywhere in the world yet. Someone's been naughty.

[Ch3vr0n]

not always some shops can be naughty too. I've picked up movies/games before they were supposed to be sold myself

[jdobbs]

This link (http://www.jdobbs.net/Freeware/BD-RBV04703.zip) points to a new release of BD Rebuilder (v0.47.03). I am putting the link here, rather than updating the first post and the website because it involves extensive changes and I'd like to get some feedback on the new 3D capabilities from beta testers before making it available to a larger audience. Changes for this release:- Implemented 3D Full Backup Mode. Note that
BD-RB converts 3D method so that the SSIF
folder is no longer required -- the method
is 100% compliant with the BD standard.
- Due to the changes in the way 3D is handled,
BD-RB no longer outputs to ISO by default on
movie-only 3D encodes. It can be enabled by
using the OUTPUT_3D_ISO hidden option. Note:
This option only applies to movie-only 3D
encodes.
- Added 3D support to Quick-Play reauthoring.
- Corrected an error in which AnyDVD selected
feature playlists might sometimes not be
given the proper priority for selection as
the disc feature.
- Added a new hidden option IMPORT_PAL_TO_FILM
which, when set to "1" sets information so
that imported video files at 25fps sources
are converted to 23.976 and the audio is
adjusted during reencoding (not import).
- Fixed an issue related to possible MPLS and
CLPI version number mismatches when doing a
full backup from imported DVDs that could
make them unplayable on certain players.
- Corrected an issue in Quick-Play reauthoring
in which the STN_table was not being updated
properly when certain types of playitems and
subplayitems were discarded.
- Corrected the zip file release -- FRIMEncode,
FRIMDecode, and FRIMSource were missing.
- Updated FRIMEncode/Decode and FRIMSource to
the most recent release (v1.23).
- Updated the included version of X264.EXE to the
latest release (r2409).
- Updated the included version of X264-64.EXE to
the latest release (r2409).
- Other minor corrections and cosmetic fixes.

[rusty666]

ill do wolverine 3d full backup frimencoder seems to be working ill let you know how the outfut file is