BD Rebuilder Beta - Bug Reports Only

[longtom]

tsmuxer crashed in win7

-----------------------
[18:02:00] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[18:02:00] PHASE ONE, Encoding
- [18:02:00] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[18:30:51] - Failed to retrieve audio, aborted

[longtom]

tsmuxer crashed in win7

-----------------------
[18:02:00] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[18:02:00] PHASE ONE, Encoding
- [18:02:00] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[18:30:51] - Failed to retrieve audio, aborted

Next try:
BD Rebuilder experienced an error 1605 Extract Audio Subs() 00053 1605

[jdobbs]

tsmuxer crashed in win7

-----------------------
[18:02:00] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[18:02:00] PHASE ONE, Encoding
- [18:02:00] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[18:30:51] - Failed to retrieve audio, aborted I'd reinstall BD-RB and all its helper apps. It isn't the disc -- I've done that one. The messages aren't the cause of the error either -- as they aren't unusual.

You may want to try running TSMUXER independently and see what is causing it to fail. There is a .meta file that is created just before the demux attempt. In this case it would be called "AUD_00066.META". Depending upon where you installed BD-RB and what your working path is, try this:

1. Run CMD from windows start button (or win icon). This will open up a command window.

2. Set youself to the working folder, then go one layer deeper to WORKFILES.

3. Run this command line (modified base on your paths):

c:\bd_rebuilder\tools\tsmuxer.exe aud_00066.meta

Report what error you get that causes it to abort.

Note: The second error "ExtractAudio Subs() 00053 1605" you are receiving is a result of missing files from the first (failed) attempt.

[Blackwalker]

hi!
i'd like to know if this is possible!

If i want to rencode a blu-ray movie, without changing the size and audio,
but i wanna only convert the Video VC1 to H264, what i have to do?

Because if i lower the size, 2-pass, it'll be converted to h264,
but if i left the same size, the program leave the VC1 video track intact!

hope its possible
thx :)

[SoniG]

Blackwalker : you can try to add FORCE_ENCODE=1 in BDREBUILDER.INI and just set the wanted BD size as the original, you will have all the parts converted to H264 without any check. More infos in HIDDENOPTS.TXT . Use this if you know what you do.

[setarip_old]

@jdobbs

Regarding the problem "longtom" is having with "Prince of Persia" you say, It isn't the disc -- I've done that one.I wonder if you may have overlooked the response to me, in which he/she said: It's Prince of Persia, Region B (If it has one).

[jdobbs]

@setarip_old

The error reported seems to indicate an issue with the large number of multi-segment parts, not the disc. That's what drives this line:

- Extracting A/V to M2TS [VID_00066]

If he follows the instructions I gave him he should be able to report why TSMUXER is failing.

[jdobbs]

hi!
i'd like to know if this is possible!

If i want to rencode a blu-ray movie, without changing the size and audio,
but i wanna only convert the Video VC1 to H264, what i have to do?

Because if i lower the size, 2-pass, it'll be converted to h264,
but if i left the same size, the program leave the VC1 video track intact!

hope its possible
thx :) Yep. Use "FORCE_ENCODE=1" like SoniG said. You may also want to set MIN_M2TS_SIZE if it appears there are some smaller ones (less than 100MB) you'd also like to reencode. :)

[setarip_old]

@jdobbs

My apologies.

I guess I misinterpreted your statement: It isn't the disc -- I've done that one. as being limited to Region A...

[Blackwalker]

Blackwalker : you can try to add FORCE_ENCODE=1 in BDREBUILDER.INI and just set the wanted BD size as the original, you will have all the parts converted to H264 without any check. More infos in HIDDENOPTS.TXT . Use this if you know what you do.

Yep. Use "FORCE_ENCODE=1" like SoniG said. You may also want to set MIN_M2TS_SIZE if it appears there are some smaller ones (less than 100MB) you'd also like to reencode. :)


Thx a lot, i'll try!! :)

[longtom]

I'd reinstall BD-RB and all its helper apps. It isn't the disc -- I've done that one. The messages aren't the cause of the error either -- as they aren't unusual.

You may want to try running TSMUXER independently and see what is causing it to fail. There is a .meta file that is created just before the demux attempt. In this case it would be called "AUD_00066.META". Depending upon where you installed BD-RB and what your working path is, try this:

1. Run CMD from windows start button (or win icon). This will open up a command window.

2. Set youself to the working folder, then go one layer deeper to WORKFILES.

3. Run this command line (modified base on your paths):

c:\bd_rebuilder\tools\tsmuxer.exe aud_00066.meta

Report what error you get that causes it to abort.

Note: The second error "ExtractAudio Subs() 00053 1605" you are receiving is a result of missing files from the first (failed) attempt.


Hmm, now i get always the Extract Audio Subs error message....

[Blackwalker]

Thx a lot, i'll try!! :)

dont work...
i set "FORCE_ENCODE=1" but the output was always VC1!
damn...

any help?
thx :(


updated:

my mistake...trying again :)

[Sharc]

BD-RB 0.34.11.
Prince of Persia (the movie is split into 140 files !)
Movie-only mode, other Movie-Only playlist selected, resize to 720p, BD-5.
The 2 selected subtitles were not extracted correctly. I got 2 sup files of the first movie segment (studio intro) in the workfolder, 0 bytes each. The rest is missing.
No big issue really. Apart from the missing subtitles, everything came out perfectly.

[longtom]

I'd reinstall BD-RB and all its helper apps. It isn't the disc -- I've done that one. The messages aren't the cause of the error either -- as they aren't unusual.

You may want to try running TSMUXER independently and see what is causing it to fail. There is a .meta file that is created just before the demux attempt. In this case it would be called "AUD_00066.META". Depending upon where you installed BD-RB and what your working path is, try this:

1. Run CMD from windows start button (or win icon). This will open up a command window.

2. Set youself to the working folder, then go one layer deeper to WORKFILES.

3. Run this command line (modified base on your paths):

c:\bd_rebuilder\tools\tsmuxer.exe aud_00066.meta

Report what error you get that causes it to abort.

Note: The second error "ExtractAudio Subs() 00053 1605" you are receiving is a result of missing files from the first (failed) attempt.

Can't detect stream type.
Comes out of the cmd line.

[14:05:29] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[14:05:30] PHASE ONE, Encoding
- [14:05:30] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[14:11:34] - Failed to retrieve audio, aborted

[worknstiff]

@Longtom: Posted from all of your BD_Rebuilder logs: - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640

I think maybe I am just being dense this morning but when I do movie only encodes all my logs all have something in this Audio section with a (1) in it. My apologies if I am missing something. bye, Worknstiff

[jdobbs]

dont work...
i set "FORCE_ENCODE=1" but the output was always VC1!
damn...

any help?
thx :(


updated:

my mistake...trying again :)It works. I use it all the time.

[jdobbs]

BD-RB 0.34.11.
Prince of Persia (the movie is split into 140 files !)
Movie-only mode, other Movie-Only playlist selected, resize to 720p, BD-5.
The 2 selected subtitles were not extracted correctly. I got 2 sup files of the first movie segment (studio intro) in the workfolder, 0 bytes each. The rest is missing.
No big issue really. Apart from the missing subtitles, everything came out perfectly. That probably means that the subtitles didn't exist in the first segment. I'll look at it, but unfortunately the US version is much different.

[jdobbs]

Hmm, now i get always the Extract Audio Subs error message.... You need to start over, it's trying to pick up where it left off -- but it can't because the files are missing.

[gamete]

hi!
i'd like to know if this is possible!

If i want to rencode a blu-ray movie, without changing the size and audio,
but i wanna only convert the Video VC1 to H264, what i have to do?

Because if i lower the size, 2-pass, it'll be converted to h264,
but if i left the same size, the program leave the VC1 video track intact!

hope its possible
thx :)



what is the advantage of this procedure?

sorry for my bad english i'm italian

[longtom]

You need to start over, it's trying to pick up where it left off -- but it can't because the files are missing.

Can't detect stream type.
Comes out of the cmd line.

[14:05:29] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[14:05:30] PHASE ONE, Encoding
- [14:05:30] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[14:11:34] - Failed to retrieve audio, aborted

[Sharc]

That probably means that the subtitles didn't exist in the first segment. I'll look at it, but unfortunately the US version is much different.
Subtitles did exist in the first segment (actually the studio intro plus beginning of the movie). It's a weird structure anyway. Don't worry, the issue is not important.

[jdobbs]

Can't detect stream type.
Comes out of the cmd line.

[14:05:29] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[14:05:30] PHASE ONE, Encoding
- [14:05:30] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[14:11:34] - Failed to retrieve audio, aborted Can you send me the meta file? I'd like to look at it. Send to: dvd-rb@dvd-rb.com

[al4x]

FIxed the problem..but

i read on a google search this can keep menus? is this correct?.. when i load the program on its default settings, i see the main menu stream and the main menu stream but as soon as i change the target size from bd9 or bd5 the main menu disappears and im only left with the main movie? [it reappears again if i change it back to bd5/9.. is this a bug or is it intentional?

i want to compress the main movie only but keep the title menu.. is this viable?

also ive been trying to do 2 pass to a custom size but it always says no reencode req'd.. is this a bug? it will reencode if i set it to bd9.. its 23GB in total

[setarip_old]

@al4x

Hi!

I think you may have posted to the wrong thread...

[al4x]

@al4x

Hi!

I think you may have posted to the wrong thread...

what one i need? or a new thread?

[setarip_old]

@al4x

This thread is exclusively for reporting bugs discovered when beta testing BD Rebuilder...

[Paddy97]

I've tried to create a profile of my own for alternate output. Wanting MKV, 1280x720 and AC3 at 640K.

So I put this into alternate.

[00010]
caption=MKV Container, 1280x720, 640Kbs AC3
vBitrate=1230
aBitrate=640
aType=0
vFormat=4

and the logfile seems OK.

[12:58:51] BD Rebuilder v0.34.11 (beta)
- Source: GOOD_BAD_WEIRD
- Input BD size: 19,11 GB
- Approximate total content: [02:04:42.399]
- Target BD size: 4,36 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- RESIZE 1080p to 720p enabled
- Mode: MKV Container, 1280x720, 640Kbs AC3
- Audio Settings: AC3=1 DTS=0 HD=0 Kbs=640
[12:58:51] PHASE ONE, Encoding
- [12:58:51] Extracting A/V streams [VID_00000]
- [13:11:19] Reencoding: VID_00000 (1 of 1)
- [13:11:19] Collecting video information
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 25,000fps, 187*060 frames
- Convert: 1280x720, 50,000fps, 374*120 frames
- [13:11:19] Reencoding: VID_00000, Pass 1 of 1
- [14:30:03] Video Encode complete
- [14:30:03] Reencoding audio tracks (if req'd)
- [14:33:26] Multiplexing M2TS
[14:33:26]PHASE ONE complete
[14:33:26]PHASE TWO - Rebuild Started
- [14:33:26] Rebuilding stream 00000 [1 of 1]
- [14:33:26] Building ALTERNATE OUTPUT Structure
[14:38:57] - Encode and Rebuild complete
[14:38:57]JOB: GOOD_BAD_WEIRD finished.

But in the end, to my surprise, I got an MP4. What did I do wrong?

[jdobbs]

I've tried to create a profile of my own for alternate output. Wanting MKV, 1280x720 and AC3 at 640K.

So I put this into alternate.

[00010]
caption=MKV Container, 1280x720, 640Kbs AC3
vBitrate=1230
aBitrate=640
aType=0
vFormat=4

and the logfile seems OK.

[12:58:51] BD Rebuilder v0.34.11 (beta)
- Source: GOOD_BAD_WEIRD
- Input BD size: 19,11 GB
- Approximate total content: [02:04:42.399]
- Target BD size: 4,36 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- RESIZE 1080p to 720p enabled
- Mode: MKV Container, 1280x720, 640Kbs AC3
- Audio Settings: AC3=1 DTS=0 HD=0 Kbs=640
[12:58:51] PHASE ONE, Encoding
- [12:58:51] Extracting A/V streams [VID_00000]
- [13:11:19] Reencoding: VID_00000 (1 of 1)
- [13:11:19] Collecting video information
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 25,000fps, 187*060 frames
- Convert: 1280x720, 50,000fps, 374*120 frames
- [13:11:19] Reencoding: VID_00000, Pass 1 of 1
- [14:30:03] Video Encode complete
- [14:30:03] Reencoding audio tracks (if req'd)
- [14:33:26] Multiplexing M2TS
[14:33:26]PHASE ONE complete
[14:33:26]PHASE TWO - Rebuild Started
- [14:33:26] Rebuilding stream 00000 [1 of 1]
- [14:33:26] Building ALTERNATE OUTPUT Structure
[14:38:57] - Encode and Rebuild complete
[14:38:57]JOB: GOOD_BAD_WEIRD finished.

But in the end, to my surprise, I got an MP4. What did I do wrong? You forgot to add "ctype=1", so it defaulted to 0.

Text from the existing ALTERNATE.TXT file:

# The options below show up in the Alternate Output Dialog
# Settings:
# caption=Text to show on alternate selection list
# vBitrate=Bitrate to use for two-pass video encoding
# aBitrate=Bitrate to use for audio encoding
# aType=Output Audio Type, 0=AC3, 1=AAC
# vFormat=Video Format: 0=320x240/180, 1= 480x360/270, 2= 640x480/360
# 3= 1024x768/576, 4= 1280x720, 5= 1920x1080
# cType= Container/limits type, 0=MP4 (iPod), 1=MKV, 2=MP4 (iPad)

[Paddy97]

You forgot to add "ctype=1", so it defaulted to 0.


Thanks! Sorry for making such a simple mistake.

[jdobbs]

That's why we're here. :)

[mortirolo]

Hello everybody.
I've been using bd rebuilder since firsts releases and i never had problems till yesterday.
I tried to make a 25gb bluray from a 3d bluray iso, with the same options that worked for every 25gb bd i maked before and i get no way.
there are a ssif files on the bluray iso apart of the normal ones that makes the iso about 87gb.
and the message that i get is "target size is too small".
There is any way to make a 25gb from a 3d bluray with bd rebuilder? maybe i'm making something wrong or maybe it's still not supported.
Thanks to jdobbs and everyone for your responses.

[mortirolo]

sorry, repeated!

[jdobbs]

Hello everybody.
I've been using bd rebuilder since firsts releases and i never had problems till yesterday.
I tried to make a 25gb bluray from a 3d bluray iso, with the same options that worked for every 25gb bd i maked before and i get no way.
there are a ssif files on the bluray iso apart of the normal ones that makes the iso about 87gb.
and the message that i get is "target size is too small".
There is any way to make a 25gb from a 3d bluray with bd rebuilder? maybe i'm making something wrong or maybe it's still not supported.
Thanks to jdobbs and everyone for your responses. All else aside, the error message isn't related to the the fact that it is a 3D source. It means that after you add up all the audio, subpicture, and unaltered streams together -- there isn't enough room on the target to reencode the video. My guess is that there are numerous huge audio streams on the original. You need to trim it down by deselecting some of them. Either that, or reencode the audio to AC3.

With that said, I'm not sure what will happen when you try to reencode the 3D video. The decoding and encoding tools aren't ready for 3D as yet.

[Ch3vr0n]

I've got an issue for ya jdobbs. I successfully rebuilt the disc Cop Out. However my standalone does not play it the way it should. After selecting play, it loops between the main menu, some still screen that looks like an arrest warrant and the copyright notices. However PowerDVD 10 DOES play it like it should with 1 small exception. I decided to display the info in the movie and managed to take a screen capture. The movie Duration was 31 Hours 40 minutes 35 seconds. I figure this is where my player sees something thats impossible and goes into continuous loop. Since the iso & ripped is already deleted from my harddrive i'll have to re-rip if you need to troubleshoot. I've got the late shift at work this week so it might take a couple of days

[jdobbs]

I've got an issue for ya jdobbs. I successfully rebuilt the disc Cop Out. However my standalone does not play it the way it should. After selecting play, it loops between the main menu, some still screen that looks like an arrest warrant and the copyright notices. However PowerDVD 10 DOES play it like it should with 1 small exception. I decided to display the info in the movie and managed to take a screen capture. The movie Duration was 31 Hours 40 minutes 35 seconds. I figure this is where my player sees something thats impossible and goes into continuous loop. Since the iso & ripped is already deleted from my harddrive i'll have to re-rip if you need to troubleshoot. I've got the late shift at work this week so it might take a couple of days Hmmm... I did that one a few weeks ago. But Im not sure if I did it movie-only or full. 31 hours, eh? Sure doesn't sound right.

[diver90]

Hello and thanks in advance for any help. I am having problems with just getting the zip file of the latest version to unzip. I keep getting the error "CRC failed in BD_Rebuilder\BD_Rebuilder.exe The file is corrupt." I have erased everything and re-downloaded twice.

[jdobbs]

Hello and thanks in advance for any help. I am having problems with just getting the zip file of the latest version to unzip. I keep getting the error "CRC failed in BD_Rebuilder\BD_Rebuilder.exe The file is corrupt." I have erased everything and re-downloaded twice. I just tested it and it worked fine for me. My guess is that there is some issue on your end. Sometimes it could be something flaky somewhere in the route. You could try an alternate site. Here's one at videohelp.com:

http://www.videohelp.com/tools/BD_Rebuilder

[diver90]

I just tested it and it worked fine for me. My guess is that there is some issue on your end. Sometimes it could be something flaky somewhere in the route. You could try an alternate site. Here's one at videohelp.com:

http://www.videohelp.com/tools/BD_Rebuilder

That did it. Thanks.

[longtom]

@Longtom: Posted from all of your BD_Rebuilder logs: - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640

I think maybe I am just being dense this morning but when I do movie only encodes all my logs all have something in this Audio section with a (1) in it. My apologies if I am missing something. bye, Worknstiff

No, That's fine when you select Keep DTS and Keep AC3 and deselct all others!

[KarstenS]

Would be really nice, if you could look for making unchecking of 2nd audio possible, as this is a tested workaround for sound problems running Dreamworks movie full backup in TMT3. Thanks alot.

[sidneysides]

Just wondered about the size of output...
I am choosing BD-25 as the output size, but most of my discs are coming out as 21.9 or 22.0GB (23,675,011,072 bytes). I can also see that the disc is not written completely to the edge. Is this a bug or a deliberate 'safety' margin as the data may be unreadable right at the edge of the disc?

[Godfire1331]

I've been using BD-Rebuilder with no problems until today. I updated to the new version of RB and tried to back-up my copy of Matrix. When I select the source path with the BDMV it keep grabbing a smaller video file that is not the whole movie. It keep grabbing an extra or behind the scenes video file. I have it set to movie only, but have always had it this way. I also updated my FFD, Avi, and media splitter as suggested. Any idea how to fix this. I'm assuming it's a setting that I have missed in one or more of the programs, but I can't seem to find it. Any help is appreciated. Thanks

[bole25]

I need some help. I changed BR v34.07 for v34.10 and, I did not make the adjust in setup (subs). Now, when a put the movie, I choose the spanish subtitles but when the m ovie is running the subtitles are in french. How can I change this mistake with the same info or data, with BR? How can I change to be correct when I see the movie?

[SquallMX]

Just wondered about the size of output...
I am choosing BD-25 as the output size, but most of my discs are coming out as 21.9 or 22.0GB (23,675,011,072 bytes). I can also see that the disc is not written completely to the edge. Is this a bug or a deliberate 'safety' margin as the data may be unreadable right at the edge of the disc?

Is a "safety margin", use custom size to get a bigger output.

[jdobbs]

Just wondered about the size of output...
I am choosing BD-25 as the output size, but most of my discs are coming out as 21.9 or 22.0GB (23,675,011,072 bytes). I can also see that the disc is not written completely to the edge. Is this a bug or a deliberate 'safety' margin as the data may be unreadable right at the edge of the disc? It's meant as a safety margin -- but I'm trying to get closer to maximum a little at a time. I'll probably edge it up a little more with the next release.

[jdobbs]

I've been using BD-Rebuilder with no problems until today. I updated to the new version of RB and tried to back-up my copy of Matrix. When I select the source path with the BDMV it keep grabbing a smaller video file that is not the whole movie. It keep grabbing an extra or behind the scenes video file. I have it set to movie only, but have always had it this way. I also updated my FFD, Avi, and media splitter as suggested. Any idea how to fix this. I'm assuming it's a setting that I have missed in one or more of the programs, but I can't seem to find it. Any help is appreciated. Thanks The selection mechanism is very good and properly selects the feature 99% of the time. But there isn't anything on the disc that says "I'm the feature", so it will never be perfect. "The Matrix" is one of the other 1%... all you have to do is use the "Other Playlist" feature and select the correct playlist.

[xterminater]

jdobbs, i have the same issue as sidney sides... someone mentioned using custom size? What are the maximum custom size that I could use for BD5, and BD9 so that it can come out to maximum bitrate as possible jdobbs? Thank you.

[Godfire1331]

Thanks jdobbs I did exactly that. Appreciate it.

[tennisbgc]

Just wondered about the size of output...
I am choosing BD-25 as the output size, but most of my discs are coming out as 21.9 or 22.0GB (23,675,011,072 bytes). I can also see that the disc is not written completely to the edge. Is this a bug or a deliberate 'safety' margin as the data may be unreadable right at the edge of the disc?Ive noticed this too. I tried a custom setting of 23.44 and the final size turned out to be 22.3 gb using 2 pass. it seems very trial and error to get the most out of bd-25.

[Pod7381]

Using BD ReBuilder v 34.11. Settings: Custom size 23,450, High Quality/2-pass. Ripped disc using AnyDVD HD.
In movie only mode, BD Rebuilder only finds 1 of the 3 episodes on the disc. So I re-encoded using full movie mode. When it got to the end of the process, BD Rebuilder did not rebuild the BD structure. Instead, I got 3 M2TS files of approx. 8Gb each. I used TsMuxer to join the files and give them BD structure. Burned using IMGburn, and the disc plays fine.
I wanted to report this because 2 problems are involved:
1- not finding all 3 episodes on the disc in movie only mode.
2- not rebuilding BD structure in full movie mode.
Something that may have caused this problem is that 2 of the episodes were in 1080P and 1 was in 1080i. I actually could only join the 2 1080P episodes using TsMuxer because of the different frame rate of the 1080i.
Any feedback on this issue would be appreciated.