Media Player Classic Home Cinema (MPC-HC) - DXVA!

[ikarad]

As.

here an other example
http://www.zshare.net/info.html?94410159-e3d3a779f95ae759d21d1b3443d2b222

for example at 11-12 seconds without ffdshow subrenderer "hold me gently" and "mechanical desing by......" are not displayed.
http://nsa28.casimages.com/img/2011/09/11/mini_110911105700385490.jpg (http://www.casimages.com/img.php?i=110911105700385490.jpg)

With ffdshow "hold me gently" and "mechanical desing by......" are displayed.
http://nsa27.casimages.com/img/2011/09/11/mini_11091110570523963.jpg (http://www.casimages.com/img.php?i=11091110570523963.jpg)

other example (there many examples in this sample)
at nearly 1min47seconds lots of subs are not displayed with mpc-hc sub renderer like "training vaisseau spiegel", "no battleships, a such","but a vessel is.... the asteroids.","sub lightspeed booster", "you could use its external booster" etc...

I add this sample also at bugtracker
https://sourceforge.net/apps/trac/mpc-hc/ticket/48#comment:23

Could you if you can correct this bug of subrenderer in mpc-hc?



Yes - i see. But - if open and play video, a see subtitle at 13 second, as and with ffdshow. Subtitle show on 1 second - with ffdshow too.
this sub ""the fourth wave of ennemy photon torpedoes is approchaing!""? With mpc-sub it is displayed and disappeared immediately. With ffdshow it displayed normally

I try since two years with all version of mpc-hc and it has never function (I had ask to casimir 666 to add support of bluray sub. He began to work upon but he had arrested before correcting all the bugs. Casimir have seen the problem but he said that he hadn't the time to correct (he started to work upon the support of dxva)). With ffdshow it works since the support of hd subs by albain.

example
with mpc-hc sub renderer at 13seconds
http://nsa28.casimages.com/img/2011/09/10/mini_110910043545939218.jpg (http://www.casimages.com/img.php?i=110910043545939218.jpg)
video here: http://www.zshare.net/video/944028910121c37b/


with fddshow sub renderer at 13 seconds
http://nsa28.casimages.com/img/2011/09/10/mini_110910043803690303.jpg (http://www.casimages.com/img.php?i=110910043803690303.jpg)
video here: http://www.zshare.net/video/94402815ee4780d4/

bugtracker
https://sourceforge.net/apps/trac/mpc-hc/ticket/48#comment:22

If you want, I can upload anew 3gb example in bugtracker because between 7minutes and 9 minutes there are many other examples of this problem.

edit: I succeed to give you 2 min showing many problems with sub renderer with mpc-hc. Video take 500mb and I will give you tomorrow.

[Aleksoid1978]

here an other example
http://www.zshare.net/info.html?94410159-e3d3a779f95ae759d21d1b3443d2b222

for example at 11-12 seconds without ffdshow subrenderer "hold me gently" and "mechanical desing by......" are not displayed.
http://nsa28.casimages.com/img/2011/09/11/mini_110911105700385490.jpg (http://www.casimages.com/img.php?i=110911105700385490.jpg)

With ffdshow "hold me gently" and "mechanical desing by......" are displayed.
http://nsa27.casimages.com/img/2011/09/11/mini_11091110570523963.jpg (http://www.casimages.com/img.php?i=11091110570523963.jpg)

other example (there many examples in this sample)
at nearly 1min47seconds lots of subs are not displayed with mpc-hc sub renderer like "training vaisseau spiegel", "no battleships, a such","but a vessel is.... the asteroids.","sub lightspeed booster", "you could use its external booster" etc...

I add this sample also at bugtracker
https://sourceforge.net/apps/trac/mpc-hc/ticket/48#comment:23

Could you if you can correct this bug of subrenderer in mpc-hc?

Try - http://aleksoid.tosei.ru/Test/mpc-hc.PGS.test.7z

[ikarad]

Try - http://aleksoid.tosei.ru/Test/mpc-hc.PGS.test.7z

I tried but there are problems:
1) at 1min48, all subs are displayed but when two subs must be displayed in the same time with your version the first is dsplayed and disappeared before the second sub. With ffdshow the both sub are displayed (it's like with power dvd for example)


2) There are other time where one sub stay not displayed

I will give you video to show problem when I would upload them

[Aleksoid1978]

I tried but there are problems:
1) at 1min48, all subs are displayed but when two subs must be displayed in the same time with your version the first is dsplayed and disappeared before the second sub. With ffdshow the both sub are displayed (it's like with power dvd for example)


2) There are other time where one sub stay not displayed

I will give you video to show problem when I would upload them

I don't correct bug with display 2 sub at one time, only bug when no sub display.

[ikarad]

I don't correct bug with display 2 sub at one time, only bug when no sub display.
I understand. If it's the bug when no sub display, it's corrected in the sample.

Will you correct bug with display 2 sub at one time?

[Aleksoid1978]

I understand. If it's the bug when no sub display, it's corrected in the sample.

Will you correct bug with display 2 sub at one time?

Probably not - or will it take a long time, sorry.

[ikarad]

Probably not - or will it take a long time, sorry.
Cry.

Although it's the problem the most important for me with subrenderer in mpc-hc . With this problem subrenderer is useless with blu-ray because in anime bluray movie, there are lots of double sub.

Moreover there is some subs not displayed even with your correction of bugs.

here with mpc-hc "passing through the scorching sunshine" is not displayed
http://www.zshare.net/video/94411609e03aad8c/

with ffdshow sub renderer "passing through the scorching sunshine" is displayed
http://www.zshare.net/video/94411591e65c25ab/

[bozek]

Hey, the guy who owns xvidvideo.ru seems to be on vacation... Can anybody compile a new build of MPC-HC BE Mod, please?

[Aleksoid1978]

Cry.

Although it's the problem the most important for me with subrenderer in mpc-hc . With this problem subrenderer is useless with blu-ray because in anime bluray movie, there are lots of double sub.

Moreover there is some subs not displayed even with your correction of bugs.

here with mpc-hc "passing through the scorching sunshine" is not displayed
http://www.zshare.net/video/94411609e03aad8c/

with ffdshow sub renderer "passing through the scorching sunshine" is displayed
http://www.zshare.net/video/94411591e65c25ab/

What sample and time ???

[ryrynz]

Hey, the guy who owns xvidvideo.ru seems to be on vacation... Can anybody compile a new build of MPC-HC BE Mod, please?

If you don't mind not having the BE mod grab build 3709 from janwillem32

http://www.mediafire.com/?r367kbp7p9but

I'd like to mention that the BE mod is of course still requiring the hotkey fix discussed earlier.

janwillem is there any chance you could pick up the BE mod and integrate it into MPC?

[Aleksoid1978]

Cry.

Although it's the problem the most important for me with subrenderer in mpc-hc . With this problem subrenderer is useless with blu-ray because in anime bluray movie, there are lots of double sub.

Moreover there is some subs not displayed even with your correction of bugs.

here with mpc-hc "passing through the scorching sunshine" is not displayed
http://www.zshare.net/video/94411609e03aad8c/

with ffdshow sub renderer "passing through the scorching sunshine" is displayed
http://www.zshare.net/video/94411591e65c25ab/

As I said - in the near future I will not correct the bug with displaying two subtitles at one time, sorry - i don't have a time to do this ...

[ikarad]

What sample and time ???

here
http://www.zshare.net/info.html?94421609-cbcf5f2d96ae5d0aaf856646703e5156

time: between 0 seconds and 20 seconds.

[kirakami]

how to enable FFDShow's DXVA with subs in MPC-HC?
What are the proper steps?

[namaiki]

how to enable FFDShow's DXVA with subs in MPC-HC?
What are the proper steps?

I believe you would get better results using MPC-HC's internal H.264 DXVA filter and subtitle filter due to ffdshow DXVA being quite buggy, at least when I tried using it.

However, if you want to try it:
Open ffdshow DXVA configuration.
Go to the 'Hardware acceleration' tab.
Tick "H264," post processing to "Surface overlay."
Tick "Subtitles," enable 'Subtitle sources' such as "Embedded subtitles."

[AM95]

I have a problem. I recently had some issues with my PC so decided to just reset it back to the factory settings to start clean. When I installed MPC for some reason I cannot get any of the frame doubling filters to work properly as they did previously. For instance, if I'm using the cyberlink mpeg-2 video decoder I'll select "force-bob" and it will show that filter as being in use but the video is clearly only playing at 29.97 instead of 59.94. Also, I installed splashlite player as a test to figure out if it might actually be some setting with the PC if it didn't work in this case either but it worked fine.

Any suggestions? Thank you.

[bozek]

If you don't mind not having the BE mod grab build 3709 from janwillem32

http://www.mediafire.com/?r367kbp7p9but

I'd like to mention that the BE mod is of course still requiring the hotkey fix discussed earlier.

janwillem is there any chance you could pick up the BE mod and integrate it into MPC?

Well, that's the thing - I'm particularly fond of the BE mod. I guess I'll just have to wait for xvidvideo to become active again.

Incidentally, what hotkey fix are you referring to?

[ryrynz]

It's actually the jumping, the small and medium jumps specifically.

http://forum.doom9.org/showthread.php?p=1516826#post1516826

[meetajhu]

is xvidvideo.ru dead?

[LigH]

The site loads. But it didn't have any updates since August, it seems.

[Wile-E-Coyote]

Neither do I, on MPC-HC or on ffdshow.

[lordkv]

I thought Aleksoid was the one who owned xvidvideo.ru and he is very much active here!

[Midzuki]

To whom this may interest :), XhmikosR has just built MPC-HC 3725:

http://xhmikosr.1f0.de/

[clsid]

Has anyone tested on Windows 8 develop preview yet?

@devs the function "IsWinSeven" might need to replaced with "IsWinSevenOrLater" were appropriate.

[SamuriHL]

Not yet, but, I plan on putting together a test machine over the weekend and can give it a try. It's a VERY underwhelming ancient laptop (Dell Inspiron 9300) but I want to test a few things on it. I can throw MPC-HC on it and see how that goes.

[TheElix]

I have green screen with this video. I did some tests and determined that is isn't the fault of a splitter or video decoder. Probably it's MPC-HC's internal EVR CP renderer.

F:\ANIME\Turn-A Gundam\[EG]Turn-A_Gundam_02_V2[EC3C89DA].mkv
General
Unique ID : 189429104555137102900387826656872291743 (0x8E82B7EE5029D571B2CBB7AB759CDD9F)
Complete name : F:\ANIME\Turn-A Gundam\[EG]Turn-A_Gundam_02_V2[EC3C89DA].mkv
Format : Matroska
File size : 322 MiB
Duration : 21mn 36s
Overall bit rate : 2 085 Kbps
Encoded date : UTC 2010-03-26 02:31:26
Writing application : mkvmerge v3.0.0 ('Hang up your Hang-Ups') built on Dec 12 2009 15:20:35
Writing library : libebml v0.7.9 + libmatroska v0.8.1
Cover : Yes / Yes / Yes / Yes / Yes / Yes / Yes
Video #1
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 21mn 36s
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Original display aspect ratio : 3:2
Frame rate : 23.976 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 67 r1153M 7b6ce6a
Encoding settings : cabac=1 / ref=4 / deblock=1:0:0 / analyse=0x3:0x113 / me=umh / subme=9 / psy_rd=0.8:0.0 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=0 / b_adapt=2 / b_bias=0 / direct=3 / wpredb=0 / keyint=240 / keyint_min=25 / scenecut=40 / rc=crf / crf=17.5 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / vbv_maxrate=50000 / vbv_bufsize=50000 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00
Audio #2
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : A_AAC
Duration : 21mn 36s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Title : Japanese 2.0
Language : Japanese
Text #3
ID : 3
Format : ASS
Codec ID : S_TEXT/ASS
Codec ID/Info : Advanced Sub Station Alpha
Compression mode : Lossless
Title : English Subs
Language : English
Menu
00:00:00.000 : :OP / :Part 1
00:10:34.467 : :Part 2
00:00:00.042 : :ED
00:21:06.181 : :Preview

[Aleksoid1978]

I have green screen with this video. I did some tests and determined that is isn't the fault of a splitter or video decoder. Probably it's MPC-HC's internal EVR CP renderer.

Upload a sample.

[upyzl]

A Bug report:

MPC-HC 1.5.2.3456 & 1.5.3.3677 (use internal subtitle filter)

When playing with loaded a ssa/ass file, if the ssa/ass file contains large text, at that moment MPC-HC will crash
But It's impossible crash in old version, such as 1.5.0.2827

settings:
http://i.imgur.com/S4fxd.png

Please solve this issue...

[Aleksoid1978]

A Bug report:

MPC-HC 1.5.2.3456 & 1.5.3.3677 (use internal subtitle filter)

When playing with loaded a ssa/ass file, if the ssa/ass file contains large text, at that moment MPC-HC will crash
But It's impossible crash in old version, such as 1.5.0.2827

settings:
http://i.imgur.com/S4fxd.png

Please solve this issue...

Upload a sample.

[upyzl]

Upload a sample.

This is a sample: http://www.mediafire.com/?4xxo4iyvu06bf0w
At 00:00:07

[Aleksoid1978]

This is a sample: http://www.mediafire.com/?4xxo4iyvu06bf0w
At 00:00:07

All ok - you need latest SVN version. Try this - http://www.mediafire.com/?xfgh33iws56bh

[upyzl]

All ok - you need latest SVN version. Try this - http://www.mediafire.com/?xfgh33iws56bh

Great!
That works well!

Thank you

[ikarad]

All ok - you need latest SVN version. Try this - http://www.mediafire.com/?xfgh33iws56bh

Aleksoid, have you suceed to correct bug of sub disappeared inthe sample that you ask to me?


What sample and time ???
here
http://www.zshare.net/info.html?94421609-cbcf5f2d96ae5d0aaf856646703e5156

time: between 0 seconds and 20 seconds.

[Aleksoid1978]

Aleksoid, have you suceed to correct bug of sub disappeared inthe sample that you ask to me?

As i say - i don't have a time to fix this ...

[Superb]

When installing MPC-HC w/ the translations on Windows 7 Hebrew (localized version; RTLed), many people report they have a scrambled settings dialog:
http://i.imgur.com/5AdDv.png
Probably has to do w/ the partial RTLing of the GUI. Better leave it LTR until it's correctly RTLed.

[kirakami]

MPC-HC when enabled DXVA with VMR7-9 on XPSP3 (i know evr is used with vista/7 same issue with evr)
already updated directx redist to latest ver june 2010.
issues with dxva:
color lowers a bit, black color turns grey a bit, dark scenes look bit grey
tried dxva with ffdshow & mpc-hc internal filters. same issue :(
no problems with Overlay Mixer but CPU usage becomes high 70-75% :(

[kirakami]

it would be really helpful if internal subtitle filter were to work in Output: Overlay Mixer

[ikarad]

As i say - i don't have a time to fix this ...

Although you have ask a sample.
What sample and time ???

Thanks for your incomplete fix. I hope anybody could correct completly this bug soon and before two years again or anew other sub format

[JanWillem32]

@kirakami: Can you look at the settings panel for your video card? The video card drivers include a set of filters that are usually force enabled (and can be disabled). The effects of those are exactly what you describe.
The internal subtitle filter is limited to custom DirectX 7 and 9 video renderers (and I'll happily kick out the DirectX 7 renderers, once I have the time to spare to do that). That will not change anytime soon, and if it happens it's probably for DirectX 11.

[blaster00]

I set MPC-HC x64 to "on top while playing video", but it switch to background when I open/switch a new program. I am always using the svn builds, and this showed up about a month or so. Older builds seems fine.

[ageback]

Chinese Simplified update to 3733

http://hotfile.com/dl/130141852/1c5a075/mplayerc.sc.rc.7z.html

[Eliminateur]

any updates on fixing the DXVA crash on sandy bridge GPU?

[lordkv]

Hey everyone. Alexoid has releases the latest builds on his website xvidvideo.ru. Thanks Alexsoid

[bozek]

Hey everyone. Alexoid has releases the latest builds on his website xvidvideo.ru. Thanks Alexsoid

updated BE mod

/me likes :thanks:

[Keiyakusha]

Hey everyone. Alexoid has releases the latest builds on his website xvidvideo.ru. Thanks Alexsoid

Maybe I'm wrong but i believe xvidvideo.ru is not Alexoid's website.

[naoan]

Hey guys, is there anyway to make current MPC BE mod to have time on seek bar like this very old BE mod that I keep?

http://i.imgur.com/M3Bqk.jpg

[pirlouy]

This screenshot does not help you in fact. :D

[Shark007]

Hey guys, is there anyway to make current MPC BE mod to have time on seek bar like this very old BE mod that I keep?

from the players menu's, click View, select 'Status'

This screenshot does not help you in fact. :D

your post is what did not help.
I also use the BE mod and knew in my player it did show a timeline - so the screenshot helped.

[blaster00]

There is another MPC-HC update site by henry (http://henry.fushizen.eu/builds/MPC-HC/). He also kept XhmikosR's (http://xhmikosr.1f0.de/index.php?folder=bXBjLWhj) and XvidVideo (http://www.xvidvideo.ru/media-player-classic-home-cinema-x86-x64/) link in the page.
I guess this is Alexoid's (http://aleksoid.tosei.ru/Dist/) site.

[Inspector.Gadget]

Hey v0lt, can you tell us about what "Allow closed captions in 'Line 21 Decoder'" does and when it should be enabled? Thank you.

[v0lt]

Hey v0lt, can you tell us about what "Allow closed captions in 'Line 21 Decoder'" does and when it should be enabled? Thank you.
If you are deaf and your DVD is labeled "Closed captioning (http://en.wikipedia.org/wiki/Closed_captioning)", then enable this option.