Media Player Classic Home Cinema (MPC-HC) - DXVA!

[fuzz!]

Try one of the options in right click -> After playback -> ...

That option is only for the current 'session'.. it's not a global, persistent setting.

[JarrettH]

If I check off LFE in the audio properties (MPEG Audio) and have two channels with no subwoofer, does this mean my two channel setup gets the LFE channel as well? I'd prefer my speakers receive LFE channel because they go to 50Hz. Thanks :cool:

Also, I don't understand if AC3 Filter can be used for MPEG Audio, why does MPC use its own decoder with videos that have MP3 audio?

Sooo what does LFE do? :thanks:

[fuzz!]

Second! Third! (my wife) Fourth! (first son) Fifth! (second son)

...

Not good enough. It is reset each time the player is started. With options "open full screen" and "d3d full screen" then when the video is over, you just get a big black screen. My computer won't sleep, and the whole family thinks the computer is already off.

Please add it to the Player Options tab. :o

Sixth! (my wife) :P

[clsid]

Also, I don't understand if AC3 Filter can be used for MPEG Audio, why does MPC use its own decoder with videos that have MP3 audio?AC3Filter only decodes MP1 and MP2 audio, not MP3.

[clsid]

The information in Trac needs some fixing.

1) Bug reporting page: (http://sourceforge.net/apps/trac/mpc-hc/wiki/Bugs_-_Reporting)
Wrong link for searching in existing bug reports. I suggest using this one:
http://sourceforge.net/apps/trac/mpc-hc/report/9
and this one
http://sourceforge.net/apps/trac/mpc-hc/search
Please also add these links to the index page of Trac (http://sourceforge.net/apps/trac/mpc-hc/). Its too difficult for newbies to find what they are looking for now.

C) There is no link to download development builds. Also, please start uploading development builds to SourceForge.
F) Add a note that a SourceForge account is required, and link to account creation and login page. Otherwise people will be scared away by the "access denied" errors that they will get.


The phpBB forum seems to be pretty much dead. Its useless that way. Maybe switch back on the standard embedded forum in SourceForge?

[namaiki]

Re: http://sourceforge.net/apps/trac/mpc-hc/ticket/67

Prebuffering subtitles using the internal subtitle renderer does not reduce CPU usage, however video portions with subtitles are less jumpy. i.e. with prebuffer off, on my Intel 4500MHD, the screen pauses for like a half-a-second before displaying subtitles (fine with my Geforce 9600M GT on the same computer), and with prebuffering enabled, the video is pretty much smooth. Animated subtitles are, however, quite broken if you have only 1 subpicture buffered, (with disable animation not selected only half of animated subs might appear).

In VSFilter, when prebuffering is enabled, I think it buffers pretty much all frames, and so CPU usage is higher, but subtitles are smoother if you have a powerful enough CPU. If the CPU is quite weak, there can be flickering of subtitles.

by Namaiki.

p.s. was that kind of a rant? D:
Also, I have a feeling that the internal subtitle renderer relies more on GPU power and VSFilter is all CPU powered.

[Leo100]

On GMA 500 1417 build just does not use DXVA for 720p files with the ref frame 16

[rack04]

How do I use the new MPC Audio Renderer? I don't see it as an option in the Audio Renderer drop down.

[Polcius]

How can I do a fresh "install" of MPC?

I mean, delete preferences, etc...

And should I do it every time I downlad a new SVN?

Thanks

[rack04]

How can I do a fresh "install" of MPC?

I mean, delete preferences, etc...

And should I do it every time I downlad a new SVN?

Thanks

http://sourceforge.net/apps/trac/mpc-hc/wiki/Troubleshooting_guidelines

[clsid]

You don't need to reset settings when updating.

[saint-francis]

On GMA 500 1417 build just does not use DXVA for 720p files with the ref frame 16

And it probably never will. There are plenty of DXVA limitations posts and threads around that should explain all of this. You probably won't get DXVA with more than 9 for 720p. It's lower with 1080P and higher with 480P. In fact I think this was just discussed on the last page!

[Leo100]

And it probably never will. There are plenty of DXVA limitations posts and threads around that should explain all of this. You probably won't get DXVA with more than 9 for 720p. It's lower with 1080P and higher with 480P. In fact I think this was just discussed on the last page!

But at this very moment, build 1311 is ideally play these same files with DXVA!

[joikd]

I get can't MPC to play a mounted blu-ray iso using the command line. Actually, I can if I specify the "pathname" as "d:\bdmv\stream\*.*", but then I'm screwed for SD DVD's.

Any ideas?

[wOxxOm]

a bug(?)

on a file->properties->details dialog:
Video: MPEG4 Video (H264) 1428x1068 (16:9) 23.98fps [Video]
Audio: AAC 48000Hz stereo 1536kbps [Audio]

why would all the players (MPCHC included) detect ALL AAC audio (inside mp4/mkv) as 1536 kbit whereas MediaInfo page on the very same dialog shows it to be some sane bitrate (245 kbit e.g.)? BTW 1536 is a dummy value for PCM 16bit uncompressed stereo wav...

and also ESC hotkey wouldn't close this 'properties' dialog if user selects that gray box on the Details page with detailed video/audio info (for 10 years as of now :p?))

[tetsuo55]

The information in Trac needs some fixing.

1) Bug reporting page: (http://sourceforge.net/apps/trac/mpc-hc/wiki/Bugs_-_Reporting)
Wrong link for searching in existing bug reports. I suggest using this one:
http://sourceforge.net/apps/trac/mpc-hc/report/9
and this one
http://sourceforge.net/apps/trac/mpc-hc/search
Please also add these links to the index page of Trac (http://sourceforge.net/apps/trac/mpc-hc/). Its too difficult for newbies to find what they are looking for now.

C) There is no link to download development builds. Also, please start uploading development builds to SourceForge.
F) Add a note that a SourceForge account is required, and link to account creation and login page. Otherwise people will be scared away by the "access denied" errors that they will get. fixed


The phpBB forum seems to be pretty much dead. Its useless that way. Maybe switch back on the standard embedded forum in SourceForge? i switched because the embedded forum is impossible to use by an admin.
So we're keeping the phpBB forum.

[clsid]

One of the reviews on the MP-HC project page (https://sourceforge.net/projects/mpc-hc/) says that posting does not work on the forum. I am not sure if that is true, but you might want to investigate, as it might explain the lack of posts.

[tetsuo55]

One of the reviews on the MP-HC project page (https://sourceforge.net/projects/mpc-hc/) says that posting does not work on the forum. I am not sure if that is true, but you might want to investigate, as it might explain the lack of posts.i'm on it.


EDIT:
Looks like a bug with sourceforge, SF staff is working on it.

But they need the exact error message, what are you guys seeing?
https://sourceforge.net/apps/phpbb/mpc-hc/

[Brazil2]

on a file->properties->details dialog:
Video: MPEG4 Video (H264) 1428x1068 (16:9) 23.98fps [Video]
Audio: AAC 48000Hz stereo 1536kbps [Audio]

why would all the players (MPCHC included) detect ALL AAC audio (inside mp4/mkv) as 1536 kbit whereas MediaInfo page on the very same dialog shows it to be some sane bitrate (245 kbit e.g.)?
It doesn't happen to me:

Audio: AAC 48000Hz stereo 127Kbps [Audio (eng)]

Audio: AAC 44100Hz stereo 111Kbps [Audio]

[ChronoReverse]

I hope this isn't too much stupidity on my part but is there a way to make MPCHC show videos that are larger than the screen resolution without resizing? Sometimes I want to see part of the video at full resolution.

[namaiki]

View-> Video Frame-> Normal.

[ChronoReverse]

The problem with that is the borders of the window will not expand past the screen size. I'd also like to be able to move the window around to see different parts. Unless there's a way to scroll the video?

[namaiki]

The problem with that is the borders of the window will not expand past the screen size. I'd also like to be able to move the window around to see different parts. Unless there's a way to scroll the video?

Ctrl + Numpad, I think. Can't check; bloody laptop..

[wOxxOm]

on a file->properties->details dialog:
Video: MPEG4 Video (H264) 1428x1068 (16:9) 23.98fps [Video]
Audio: AAC 48000Hz stereo 1536kbps [Audio]
It doesn't happen to me:

Got it:
MPC's internal mp4/mkv splitter enabled - it's ok,
MPC's internal mp4/mkv splitter disabled (Haali is used) - 1536 kbit.

but internal splitters for avi/mp4/mkv are too dumb because they don't show as much (as Haali) info in "filters" menu and give no support for mkv linking / ordered chapters.

[nurbs]

Well, 1536kbps is the bitrate of an uncompressed 16bit 48kHz stereo audio track, so if all your aac tracks are stereo that explains why you get that number. Of course that doesn't explain why you don't get the encoded bitrate of the file.

[w0rd™]

I have a quick question, how can I change some keys settings but not from within the player. Like I want to say change the volume hot-keys, but through a file, or command or the registry.

Can this be done?

I had a quick look at the registry, but can't see anything about the keyboard keys.


Thanks.

[namaiki]

@w0rd: look under HKEY_CURRENT_USER\Software\Gabest\Media Player Classic\Commands2 or in the ini file: [Commands2]
I'm not sure if there is documentation for that, but for me, I have started clean, change some keys within MPC and then save a reg file for what it changes.

[w0rd™]

Thanks, that worked!

I wonder why there isn't a normal registry list of the keys, that can be easily changed!?


thanks again.

[tetsuo55]

One of the reviews on the MP-HC project page (https://sourceforge.net/projects/mpc-hc/) says that posting does not work on the forum. I am not sure if that is true, but you might want to investigate, as it might explain the lack of posts.Should be fixed now!

[sneaker_ger]

How do I report bugs? The link in the start post is outdated and the one in the checklist (tetsuo's signature) says I don't have enough privileges. Do I need to create an account on sourceforge now?

Want to add the following bug as I didn't get any reply here:
I have a problem with the "file"->"close" function. While indeed the file is closed and I can rename/move it the folder containing the file can not be modified until I exit MPC-HC.

[tetsuo55]

How do I report bugs? The link in the start post is outdated and the one in the checklist (tetsuo's signature) says I don't have enough privileges. Do I need to create an account on sourceforge now?

Want to add the following bug as I didn't get any reply here:yes, you need to register

[Gleb Egorych]

Tested b1417 (build from xvidvideo.ru) - no more 1312 stuttering issues on Vista x64, EVR-CP (optimal), GF8800GT (FW191.07).

But this build often crashes on multiple "Jump forward (medium)" and "Jump backward (medium)" commands. Build 1311 is OK.

crash details:
Problem signature:
Problem Event Name: BEX
Application Name: mplayerc_rc.exe
Application Version: 1.3.1417.0
Application Timestamp: 4b26f1a4
Fault Module Name: evr.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e037bb
Exception Offset: 0000844a
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6002.2.2.0.256.1
Locale ID: 1049
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160

[saint-francis]

Is there a way to adjust subtitle timing on the fly with MPC HC? I'm trying to sync up subs from a DVD to a BD and muxing and remuxing with a different guess for sub timing each time is a PITA.

[BatKnight]

Is there a way to adjust subtitle timing on the fly with MPC HC? I'm trying to sync up subs from a DVD to a BD and muxing and remuxing with a different guess for sub timing each time is a PITA.
Press F1 or F2 during play. Inside Options -> Subtitles, change the desired Delay.

[tetsuo55]

Tested b1417 (build from xvidvideo.ru) - no more 1312 stuttering issues on Vista x64, EVR-CP (optimal), GF8800GT (FW191.07).

But this build often crashes on multiple "Jump forward (medium)" and "Jump backward (medium)" commands. Build 1311 is OK.

crash details:
Problem signature:
Problem Event Name: BEX
Application Name: mplayerc_rc.exe
Application Version: 1.3.1417.0
Application Timestamp: 4b26f1a4
Fault Module Name: evr.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e037bb
Exception Offset: 0000844a
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6002.2.2.0.256.1
Locale ID: 1049
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160Thanks for this report, the seek is triggering a memory corruption.
the reason the old build works is because we wheren't detecting this before, so corruption of memory would build up till something on the computer randomly crashes minutes, days or weeks later.

Can you upload a sample of the file that you can reproduce this crash with.

[Leak]

I have a problem with the "file"->"close" function. While indeed the file is closed and I can rename/move it the folder containing the file can not be modified until I exit MPC-HC.
I'd hazard a guess that that directory was made MPC-HC's working directory so you can't rename/delete it. I guess it should be enough to change the working directory to MPC-HC's installation directory when you close a file.

[sneaker_ger]

I'd hazard a guess that that directory was made MPC-HC's working directory so you can't rename/delete it. I guess it should be enough to change the working directory to MPC-HC's installation directory when you close a file.

I don't know how to do that nor would I want to do it every time I close a file. MPC-HC shouldn't do it, should it?

[saint-francis]

Press F1 or F2 during play. Inside Options -> Subtitles, change the desired Delay.

Great. Thanks.

BTW is that Options -> Subtitles -> Delay Interval?

[clsid]

Yes. That is the correct setting. The interval value is added/subtracted to/from the current delay whenever you press F1/F2.

[Gleb Egorych]

Thanks for this report, the seek is triggering a memory corruption.
the reason the old build works is because we wheren't detecting this before, so corruption of memory would build up till something on the computer randomly crashes minutes, days or weeks later.

Can you upload a sample of the file that you can reproduce this crash with.
The bug is present for almost every file I've tested, but they are rather long (1.5-2 hours) so it's hard to upload them.

Also I can reproduce the bug only WITH ReClock. If ReClock (1.8.4.9 & 1.8.5.1a tested) is used then MPC-HC crashes very often after numerous jumps. Just press and hold a key assigned to "Jump forward (medium)" and a few second later MPC-HC crashes.

Without ReClock it seems to be OK.

[clsid]

Please test a couple of builds in between 1311 and 1417 to narrow down the range in which the problem was introduced.

Does it happen only with certain file types or video formats?
Does it happen if you disable the internal H.264 decoder?

[tetsuo55]

Please test a couple of builds in between 1311 and 1417 to narrow down the range in which the problem was introduced.
No need to check the builds, we introduced this error message ourselves.
What we need is a Symbols debug build so we can find out what is causing mpc-hc to do this illegal memory access.

[thrawnrulz68]

I am using MPC-HC v1.3.1418 and I am encountering a strange problem on my laptop (Windows Vista 32-bit, 1.83 ghz, 4gb ram, nvidia quadro nvs 110m). When I am playing an HD quicktime file (using Quicktime architecture, latest version - not dshow), if I switch from full screen back to windowed, the player will crash. This only happens when using alt-enter to switch, however. Double clicking the video does not cause this problem. Does this happen to anyone else?

[tetsuo55]

I am using MPC-HC v1.3.1418 and I am encountering a strange problem on my laptop (Windows Vista 32-bit, 1.83 ghz, 4gb ram, nvidia quadro nvs 110m). When I am playing an HD quicktime file (using Quicktime architecture, latest version - not dshow), if I switch from full screen back to windowed, the player will crash. This only happens when using alt-enter to switch, however. Double clicking the video does not cause this problem. Does this happen to anyone else?can you post the crash dump info?

[Leak]

I don't know how to do that nor would I want to do it every time I close a file. MPC-HC shouldn't do it, should it?
Ugh. I meant MPC-HC should do that, not you - you can't simply change an applications current working directory by hand.

[sneaker_ger]

I see. Thought I missed something for a while.

[thrawnrulz68]

this is the debug info from visual studio 2008:

'mpc-hc.exe': Loaded 'C:\Users\Tom\Documents\mpc-hc.exe'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ntdll.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\kernel32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\version.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msvcrt.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\dsound.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\user32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\gdi32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\advapi32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\rpcrt4.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ole32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\winmm.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\oleaut32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\oleacc.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\powrprof.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ddraw.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\dciman32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\setupapi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\dwmapi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\comdlg32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\shlwapi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.18005_none_5cb72f96088b0de0\comctl32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\shell32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\winspool.drv'
'mpc-hc.exe': Loaded 'C:\Windows\System32\oledlg.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ws2_32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\nsi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\wininet.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\normaliz.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\urlmon.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\iertutil.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\imm32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msctf.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\lpk.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\usp10.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\psapi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\uxtheme.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\clbcatq.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\devenum.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\wintrust.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\crypt32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msasn1.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\userenv.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\secur32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\imagehlp.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msdmo.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\rsaenh.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\browseui.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\propsys.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\duser.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\WindowsCodecs.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\apphelp.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\EhStorShell.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Microsoft Office\Office12\GrooveShellExtensions.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Microsoft Office\Office12\GrooveUtil.dll'
'mpc-hc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d08d7da0442a985d\msvcr80.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Microsoft Office\Office12\GrooveNew.dll'
'mpc-hc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_d1c5318643596706\ATL80.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msimg32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\cscui.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\cscdll.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\cscapi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msshsq.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\thumbcache.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\actxprxy.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\shdocvw.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ieframe.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ntshrui.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\netapi32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\SLC.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Microsoft Office\Office12\GrooveSystemServices.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msxml3.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\samlib.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\linkinfo.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\networkexplorer.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\mpr.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Symantec\Symantec Endpoint Protection\SnacNp.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ntlanman.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\drprov.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\davclnt.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\PortableDeviceApi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\EhStorAPI.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTime.qts'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QTCF.dll'
'mpc-hc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6002.18005_none_9e50b396ca17ae07\GdiPlus.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\CoreFoundation.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\pthreadVC2.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\wsock32.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\objc.dll'
'mpc-hc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d08d7da0442a985d\msvcp80.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\icuin40.dll', Binary was not built with debug information.
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\icuuc40.dll', Binary was not built with debug information.
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\icudt40.dll', Binary was not built with debug information.
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\ASL.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\CFNetwork.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\SQLite3.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\Common Files\Apple\Apple Application Support\zlib1.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\IPHLPAPI.DLL'
'mpc-hc.exe': Loaded 'C:\Windows\System32\dhcpcsvc.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\dnsapi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\winnsi.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\dhcpcsvc6.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\wdmaud.drv'
'mpc-hc.exe': Loaded 'C:\Windows\System32\ksuser.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\MMDevAPI.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\avrt.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\AudioSes.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\AudioEng.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msacm32.drv'
'mpc-hc.exe': Loaded 'C:\Windows\System32\msacm32.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\midimap.dll'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\CoreVideo.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTime3GPP.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTime3GPPAuthoring.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeAudioSupport.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeAuthoring.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeCapture.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeEffects.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeEssentials.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeH264.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeImage.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeInternetExtras.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeMPEG.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeMPEG4.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeMPEG4Authoring.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeMusic.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeStreaming.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeStreamingAuthoring.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeStreamingExtras.qtx'
'mpc-hc.exe': Loaded 'C:\Program Files\QuickTime\QTSystem\QuickTimeVR.qtx'
'mpc-hc.exe': Loaded 'C:\Windows\System32\d3d9.dll'
'mpc-hc.exe': Loaded 'C:\Windows\System32\d3d8thk.dll'
The thread 'Win32 Thread' (0x13f8) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xa8c) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x1130) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x1cc4) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xf64) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x1978) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xfb8) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x106c) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x163c) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x1b58) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x13a4) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x17c8) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1b90) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1bf4) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1c30) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1c24) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1c78) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1a10) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1c70) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x18b8) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x13dc) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0xb50) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1184) has exited with code -1073741819 (0xc0000005).
The thread 'Win32 Thread' (0x1480) has exited with code -1073741819 (0xc0000005).
SNAC NP Detach!
The program '[7048] mpc-hc.exe: Native' has exited with code -1073741819 (0xc0000005).

[snyders6dogrecipe]

I have Windows 7 and I need to activate EVR Custom Pre. if I want DXVA to work correctly in mpc-hc. However, I much prefer the look of the image when PS 2.0 is enabled, as 3D surfaces is disabled with this renderer. Is there a way to use PS with DXVA at the same time on Windows 7?

Thank you

[namaiki]

However, I much prefer the look of the image when PS 2.0 is enabledThe image is actually the same? Unless you are talking about changing from Bilinear to one of the Bicubic resizers.

3D surfaces are disabled with EVR-Custom
They're not. I can still do the sphere thing + DXVA, unless that is something else.. :|

[flanger216]

I have Windows 7 and I need to activate EVR Custom Pre. if I want DXVA to work correctly in mpc-hc. However, I much prefer the look of the image when PS 2.0 is enabled, as 3D surfaces is disabled with this renderer. Is there a way to use PS with DXVA at the same time on Windows 7?

Thank you

Eh? The selector is grayed out because EVR always uses 3D surfacing. So... the bicubic resizers work fine with EVR.