RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[laserfan]

so no one figure out how to install the right version ?I changed the ini file and that seemed to work for me.

I've wondered though if the issue is as simple as "different versions of Windows in different countries & time zones result in a different creation date for Haali". Maybe if you alter the date with Attribute Changer or something then RipBot will stop complaining...

[laserfan]

Sometimes the COPY STREAM option for Audio is unavailable to me...it has happened both with the latest 1.13 but also the previous 1.12.Screenshot please.
Here's an example where the .ac3 is unchanged from the BD (640Kbps, 6-channel, not E-AC3) but RipBot264 doesn't show COPY STREAM as an option (though at least in this case it does give 640 as an option).

EDIT: I've now tried 1.12.0 and 1.11.5 and even re-installed old Haali and still no good. Wonder if RipBot264 depends on anything else in my setup that might be amiss. Using XP Pro x64 here (and am now going to try my old P4 machine).

[wolfbane5]

I tried using v1.13.0 last night and am having some problems. I bypassed the check (i have the latest of the 3 required) and tried encoding The Bourne Supremacy (BD). I loaded up the .ts (contained only the video) and the .dts track, cropped the black bars and set the output as an mkv. When I hit start, couple seconds passed and 'All Jobs Finished' came up. Not exactly sure why this happened since I encoded the same movie with v1.12.0 and it worked just fine.

Now if I'm not mistaken, with v1.13.0 the CUT function is always on? If that's the case, it doesn't reflect it in the menu for v1.13.0. If the video was slightly longer than the audio in v1.12.0 and you switched between CUT and OFF, you could clearly see the difference. With v1.13.0, it doesn't show that anymore.

[topsham]

Is there any way to select AC3 output in an mp4 file for Apple TV as I would much rather use Ripbot than Handbrake as it's much less fussy about input files?

[spida_singh]

Where do you remove this?

::EDIT::

Found it, thanks, now running ok.


@wolfbane5

Try this under the profile setting you select.

[juGGaKNot]

A small notice :

StoreTempFilesin=AUTO does not work on my pc

had to change it to StoreTempFilesin=D:\ for the encode to work

LE : After changing to StoreTempFilesin=D:\ now StoreTempFilesin=AUTO works.

Update, StoreTempFilesin=AUTO still does not work

Using StoreTempFilesin=D:\ for now



E:\>"D:\RipBot264v1.13.0\tools\x264\x264.exe" "E:\temp\RipBot264temp\job1\job1.avs" --crf 20 --sar 1:1 --level 4.0 --aud --nal-hrd --vbv-bufsize 25000 --vbv-maxrate 25000 --filter -3,-3 --ref 3 --mixed-refs --bframes 3 --b-adapt 2 --weightb --direct auto --subme 9 --trellis 2 --partitions all --8x8dct --me tesa --threads auto --thread-input --progress --no-psnr --no-ssim --output "E:\temp\RipBot264temp\video.264"

D:\RipBot264v1.13.0\tools\x264\x264.exe: unknown option -- nal-hrd


E:\>"D:\RipBot264v1.13.0\tools\mkvtoolnix\mkvmerge.exe" -o "D:\Untitled.mkv" --default-duration 0:30fps -d 0 -A -S "E:\temp\RipBot264temp\video.264" --language 0:und --sync 0:0 -a 0 -D -S "D:\Untitled.mp3"

mkvmerge v2.4.0 ('Fumbling Towards Ecstasy') built on Oct 11 2008 20:10:57

Error: The source file 'E:\temp\RipBot264temp\video.264' could not be opened successfully, or retrieving its size by seeking to the end did not work.
-------------------------

Elapsed Time: 00h:00m:00s

[Atak_Snajpera]

Here's an example where the .ac3 is unchanged from the BD (640Kbps, 6-channel, not E-AC3) but RipBot264 doesn't show COPY STREAM as an option (though at least in this case it does give 640 as an option).

This screenshot helped alot. I know what went wrong. I didn't predict that user would use capital letters in extension (.AC3).

@survivant001
Report this small revision problem to that guy.

Update, StoreTempFilesin=AUTO still does not work

Using StoreTempFilesin=D:\ for now
Auto means the biggest HDD or partition. Which partition is the biggest on your pc? Screenshot ?

[Ajax_Undone]

Once a patched build is available a New Installer will be as well.

[wakebrder]

Bluray chapters seem to be broken in 1.13.0.

If I advance chapter on standalone, it hangs, then returns to the beginning of the disc.

It worked fine in 1.12.0.:confused:

[nekrosoft13]

anyone know that is causing this error? evern seen this in ripbot before.

http://img25.imageshack.us/img25/5892/capturegl2.jpg

[~bT~]

^ what is the source? post mediainfo.

[~bT~]

Bluray chapters seem to be broken in 1.13.0.

If I advance chapter on standalone, it hangs, then returns to the beginning of the disc.

It worked fine in 1.12.0.:confused:
maybe it has something to do with this?

http://forum.doom9.org/showthread.php?p=1245692#post1245692

[nekrosoft13]

^ what is the source? post mediainfo.

here are few, same error

General
ID : 0
Complete name : \\NEKROSERV\h$\HD Films Back-up\Planet Earth\Galapagos\00001.m2ts
Format : BDAV
Format/Info : BluRay Video
File size : 7.31 GiB
Duration : 49mn 5s
Overall bit rate : 21.3 Mbps
Maximum Overall bit rate : 48.0 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : VC-1
Format profile : AP@L3
Duration : 49mn 2s
Bit rate : 20.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16/9
Frame rate : 29.970 fps
Colorimetry : 4:2:0
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.322

Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Duration : 49mn 5s
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 2 channels
Channel positions : L R
Sampling rate : 48.0 KHz

Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS


----------------------------------------------------------------------------------------------------------------

General
ID : 1
Complete name : \\NEKROSERV\Share\G Drive\Earth Biography\1.ts
Format : MPEG-TS
File size : 6.63 GiB
Duration : 45mn 26s
Overall bit rate : 20.9 Mbps
Maximum Overall bit rate : 35.5 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : VC-1
Format profile : AP@L3
Duration : 45mn 24s
Bit rate : 19.4 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16/9
Frame rate : 29.970 fps
Colorimetry : 4:2:0
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.312

Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Duration : 45mn 26s
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Surround: L R, LFE
Sampling rate : 48.0 KHz

[~bT~]

^ have you set vc1 to wmv in ffdshow?

[nekrosoft13]

yes, i tried that before, but that causes diffrent error.

http://g.imagehost.org/0217/Untitled.jpg

after that error i was trying to use libavcodec, never ran into this issue with previous ripbot versions, is there any place i can find 1.12 ??

[~bT~]

which os? xp?

http://www.videohelp.com/tools/RipBot264/old-versions#download

[nekrosoft13]

vista 64bit ultimate

[wakebrder]

maybe it has something to do with this?

http://forum.doom9.org/showthread.php?p=1245692#post1245692

Guess I should have went back 1 more page.

You do realize this is a long thread, right? :eek:

[laserfan]

This screenshot helped alot. I know what went wrong. I didn't predict that user would use capital letters in extension (.AC3).Oh, man--that was it. I'd been playing with a new extraction tool and it output CAPS!!!! :devil: And I hate CAPS!!! Thanks for the quick response; I can deal with fixing the case now! :)

[8ternity]

anyone know that is causing this error? evern seen this in ripbot before.



have you try to Update for the latest DirectX 10 driver?

"Download the latest DirectX"

http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

And Reboot windows, try again, give us feedback after.

[wolfbane5]

is there any place i can find 1.12 ??

Simply google it and you'll find it. I'm having problems with 1.13.0 too, so I'm sticking with 1.12.0 until its ironed out.

[Ajax_Undone]

Simply google it and you'll find it. I'm having problems with 1.13.0 too, so I'm sticking with 1.12.0 until its ironed out.

There is always my installer. Just deselect the FFDShow install and the AVIsynth

I am hopping to have a new item as pat of the install real by next release...

[juGGaKNot]

Auto means the biggest HDD or partition. Which partition is the biggest on your pc? Screenshot ?

Until i upgraded to 1.13.0 partition E was always used

D and E are the same size ( 596 gb ) but E has more free space.

Auto worked fine until now.

Click me (http://i286.photobucket.com/albums/ll105/juGGaKNot4cs/AUTO_Partition.jpg)

is there any place i can find 1.12 ??

See full changelog.

[asarian]

@juGGaKNot
If you download another 64 bit x264 you'd replace x264_x64.exe, x264.exe is 32 bit.

I don't get it. What about the need for a 64bit AviSynth (and dito plugins!) then?

[Wishbringer]

What about the need for a 64bit AviSynth (and dito plugins!)...

Maybe I am wrong, but:
Avisynth 32bit and plugins 32bit can be piped over avs2yuv.
YUV is a raw format x264 64bit can handle.
So it seems to be a hybrid solution.
And is good, as long overhead (pipeline and conversion) is smaller than gain from 64bit code.

At my Q9650 at 3.825 GHz new RipBot is around 6% faster.

[asarian]

Maybe I am wrong, but:
Avisynth 32bit and plugins 32bit can be piped over avs2yuv.
YUV is a raw format x264 64bit can handle.
So it seems to be a hybrid solution.
And is good, as long overhead (pipeline and conversion) is smaller than gain from 64bit code.

At my Q9650 at 3.825 GHz new RipBot is around 6% faster.

Thanks for the explanation. Worth trying out, methinks. :)

[cmx]

hi All
i have question
when i encode .mpg about 7 gb (caputed from HD camera) to .mkv (2 pass ,lock size 4480)
in version 1.13 i'm getting final size 5472
any one alse experiencing some problem?
thx

[illestdomer2005]

Why do I feel like there will be a 1.14.0 soon? ;) Just busting your chops, Atak!

How well has RipBot worked for you guys on the Windows 7 64 bit Beta? I am debating installing AnyDVD and RipBot on that partition just to see how much faster, if at all, I can encode.

Right now, I am running Vista Home (32 bit) with a Q6700@3.33 GHz, 4 GB of 800MHz RAM @667 MHz (synced in SLi mode) on a 780i mobo and a single 1TB WD Black Edition HDD. The Windows 7 Beta is on a separate hard drive (just an old 500 GB that I had) with obviously the same equipment other than the hard drive.

I would love to hear from the guys who made the jump to the i7 setups from the quad processors about how much encoding sped up. I would love to have a good reason to build another rig ;)

Thanks!

[jtheripper]

well I also got the job finished instantly error in 1.13. Looking in the job log here is the error "Can't open file: E:\temp\RipBot264temp\video.264" Same rip works good in 1.10.8 (my favorite version and by far the fastest encoding version) and 1.12

[T-x]

i am wondering if it at all woud be possible to make V1.14.0 able to import folder as its a enying to select 1 file after another when you have multiple files in that same folder you want to convert with the same settings

Sorry for the bad english but its not my first laungish

[Ajax_Undone]

i am wondering if it at all woud be possible to make V1.14.0 able to import folder as its a enying to select 1 file after another when you have multiple files in that same folder you want to convert with the same settings

Sorry for the bad english but its not my first laungish

It might be doable with Kamiwa's Batch Encoder it allows you to do this. http://www.kamiwa.de/en/node/16 Here is a link to the installer (http://www.kamiwa.de/files/BatchEncoderSetup.rar) And here is the Subversion (http://subversion.kamiwa.de/svn/repobrowser.svn?path=/&revision=HEAD&name=kamiwa) if you want to do some editing/updating to the source and Compile its Written in C# 2005....

[Ajax_Undone]

To All:
All I see is it needing is a few small improvements so it might be good as soon as 1.13.5.

I am sure hes been fixing some if not all the issues found since release. So be patient he will get it fixed.

It doesn't take long to hit the back button on your explorer and use some of the other GUI's. :) Some are quite easy to use and most use the exact same codec and tool set.:p

[topsham]

Is there any way to select AC3 output in an mp4 file for Apple TV as I would much rather use Ripbot than Handbrake as it's much less fussy about input files?Can anyone please tell me how I can get 6 channel AC3 audio in an mp4/m4v file?

[Alfeuss]

Can anyone please tell me how I can get 6 channel AC3 audio in an mp4/m4v file?

Google YAMB

[topsham]

Thanks for the suggestion but it wouldn't work with any of the mkv or m2ts files I tried.

[poisondeathray]

Thanks for the suggestion but it wouldn't work with any of the mkv or m2ts files I tried.

Use the elementary streams.

Also some mp4box builds have issues with AC3 in .mp4. Another option in this case would be mp4muxer.

This takes 2 steps;
1) encode your video & audio (or just the video & retain AC3)
2) take the elementary video & audio to mux them in to .mp4 with mp4muxer

[urbanriot]

I can not get version 1.13 to work. v1.12, after juggling various versions of required apps, finally worked. However, v 1.13 says I'm missing both FFDshow and Haali Media Splitter, even though v 1.12 accepts my configuration.

I even tried uninstalling and reinstalling various versions of FFDshow, both x86 and x64 (preferably), and v 1.12 works fine but not v 1.13. Any suggestions?

[~bT~]

v 1.12 works fine but not v 1.13. Any suggestions?stick with v 1.12 until an update is released :D

[BlindBandit]

I can not get version 1.13 to work. v1.12, after juggling various versions of required apps, finally worked. However, v 1.13 says I'm missing both FFDshow and Haali Media Splitter, even though v 1.12 accepts my configuration.

I even tried uninstalling and reinstalling various versions of FFDshow, both x86 and x64 (preferably), and v 1.12 works fine but not v 1.13. Any suggestions?

If you have v1.13.0 then go to the RipBot264 folder & look for RipBot264.ini then change this //RipBot264 will check if AviSynth, FFDshow and Haali Media Spliter are installed and will also check account type
CheckRequiredSoftware=1 change the 1 to 0 then save, it will work now.

v1.13.0 is the best RipBot264 to date so far. not only that but i get a smaller size in my mp4 when using the same settings as the source video with subs, two x264 64bit is faster then x264 32bit by 10% or more. three, the IQ is freaking sweet, i will post a picture soon of the mkv file to mp4.

[topsham]

Use the elementary streams.

Also some mp4box builds have issues with AC3 in .mp4. Another option in this case would be mp4muxer.

This takes 2 steps;
1) encode your video & audio (or just the video & retain AC3)
2) take the elementary video & audio to mux them in to .mp4 with mp4muxer

Thanks for that but the files I am working on contain dts audio and I am struggling to convert that to ac3.

J:\PlanetApes>"J:\Convert\eac3to\eac3to.exe" "J:\PlanetApes\00000.track_4352.dts
" "J:\PlanetApes\00000.track_4352.ac3"
DTS Master Audio, 5.1 channels, 24 bits, 48khz
(core: DTS, 5.1 channels, 24 bits, 1509kbps, 48khz)
Decoding with ArcSoft DTS Decoder...
Encoding AC3 <640kbps> with libAften...
invalid number of channels
Initialization of the AC3 encoder failed.
Aborted at file position 262144.

Can I use Ripbot just to convert the audio?

[Blackwalker]

same here...installed but dont work
anyway thx a lot for the hard work you are doing :)

hope in some fix soon!

[Wishbringer]

@Atak: just for info

With Ripbot264 v1.13 I just finished encoding of Mummy Triology and Pirates of Caribian Triology.
I selected DTS-HD stream copy and changed --b-adapt to 2 and --subme to 9 to increase quality a bit.
All encodes had target size of DVD9 (8150MB).
All encodes were 3% undersized (display of ImgBurn 97% of disk space used).

[~bT~]

^ are you moaning about the 3% undersize or are you complimenting him on a wonderful app? :p

[poisondeathray]

Thanks for that but the files I am working on contain dts audio and I am struggling to convert that to ac3.

J:\PlanetApes>"J:\Convert\eac3to\eac3to.exe" "J:\PlanetApes\00000.track_4352.dts
" "J:\PlanetApes\00000.track_4352.ac3"
DTS Master Audio, 5.1 channels, 24 bits, 48khz
(core: DTS, 5.1 channels, 24 bits, 1509kbps, 48khz)
Decoding with ArcSoft DTS Decoder...
Encoding AC3 <640kbps> with libAften...
invalid number of channels
Initialization of the AC3 encoder failed.
Aborted at file position 262144.

Can I use Ripbot just to convert the audio?




Do you mean a dts => ac3 conversion (no video)? I don't think it can, I would use eac3to to do that. Another option would be foobar2000 with dts plugin

It looks like ripbot had errors when trying to do that conversion. Ripbot uses eac3to but try the standalone eac3to for the audio conversion. If you still have problems, post in the eac3to thread for help

[nwg]

Of course Ripbot can do DTS - AC3. Just select AC3 640kbps in the drop down box after selecting the DTS in the streams box. If something goes wrong then it is a Eac3to issue.

[T-x]

It might be doable with Kamiwa's Batch Encoder it allows you to do this. http://www.kamiwa.de/en/node/16 Here is a link to the installer (http://www.kamiwa.de/files/BatchEncoderSetup.rar) And here is the Subversion (http://subversion.kamiwa.de/svn/repobrowser.svn?path=/&revision=HEAD&name=kamiwa) if you want to do some editing/updating to the source and Compile its Written in C# 2005....

took a look at the app but i dodsnt do what i what it to do
there is no way at all to set file size
and now way im toutching Divx as the encoder even thou it can make it in to a mkv file.

has tryed a lot off other apps most have setting comming out of there asses and the others are missing settings.

ripbot264x is simple with all the settings i need exept you have to import 1 file at a time it woud make it mutch easier if one was able to import an entire folder at a time.

[BlindBandit]

Naruto HD 1080p mkv - 383mb
http://img10.imageshack.us/img10/9320/narutohdmkvta9.jpg

Naruto HD 720p mp4
using RipBot264 v1.13.0 with my custom PS3 settings at lock 350mb 2 pass after Ripbot264 was done, i got 320mb at the same image.
http://img13.imageshack.us/img13/2206/narutohdmp4ms6.jpg

Also there a bug that where a video file has 29.97fps & try to put it 23.97fps the audio does not match with the video & you get from a 23min show, 28mins.

[Atak_Snajpera]

You should use decimate function

i got 320mb at the same image.
show me log

[BlindBandit]

You should use decimate function


show me log

I try that but the audio comes out a few second's late. it's a pain but 29fps & 119fps video does that but it's no big deal i just get a difference video file & see if it has 23.97fps. since the HDTV i have does 120hz, so it's not a problem.

[Wishbringer]

^ are you moaning about the 3% undersize or are you complimenting him on a wonderful app? :p

2nd!
I can live with 3% undersize.
But I wanted to show, that there is an undersize issue.