RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[slalom]

I get an out of sync and out of size on a 29.97 fps 1080p mkv

Is there a special setting?

[Mastеr]

How I can re-encode the audio in more than 128 aac kbps quality???

new mkv format not understand my telephone (android) and last version my pc player - winamp.

[guest]

Just thought I'd leave a comment on my 1st experience with 1.18.2 beta 2.

I create quite a queue, and all of it was just basic x264, resize, and I noticed that after having completed the first few movies, that it actually didn't complete them, as they were not in the folder that I wanted to save them in....they were no where :(

Opened up 1.18.1, and started the same queue, and no problems.....

Any idea's ???

[Atak_Snajpera]

correct me if i'm wrong. You tried to encode jobs created in older version (1.18.1) in beta?

[guest]

correct me if i'm wrong. You tried to encode jobs created in older version (1.18.1) in beta?

Actually, the other way around....

I created the queue in beta 2, and when it didn't appear to be finishing properly, I started the same queue in .1.

But it is a beta, so maybe that's the reason.

Do you suggest that I remove .1 ???

[Atak_Snajpera]

ok so job created in beta didn't mux video file? Did you check logs then?

[Mastеr]

ok so job created in beta didn't mux video file? Did you check logs then?

Hey! Atak_Snajpera!

How I can re-encode the audio in more than 128 aac kbps quality???
I need 240 256 kbps.

[Atak_Snajpera]

you will have to manually edit encodeaudio1.cmd in job folder.

[Mastеr]

you will have to manually edit encodeaudio1.cmd in job folder.

are you kidding ??? Is difficult to add this feature in interface???

what to do when 50 jobs ???

[Atak_Snajpera]

I'm just answering your question...

What is the point of encoding 2.0 audio at more 128 kbps? Especially if you are going to play those audio tracks on some smartfone with poor speaker or earphones.

[Mastеr]

I'm just answering your question...

What is the point of encoding 2.0 audio at more 128 kbps? Especially if you are going to play those audio tracks on some smartfone with poor speaker or earphones.

Knock knock! Atak_Snajpera! Future is coming!

I have premium, monitoring headphones akg495nc, flagman smartphone galaxy s5. My notebook have beats audio. And i'm meloman. I have a big klips collection. You can see on my site http://master255.org/.
And i need good quality of sound!!!!

If the video quality is good, why is the sound quality is bad ???

'm a programmer and do not tell me that it is difficult! it's easier than writing in this forum!

[Atak_Snajpera]

128 kbps AAC/OPUS is even more than enough. See latest results for 96kbps.
http://www.hydrogenaud.io/forums/index.php?showtopic=106911

[Mastеr]

128 kbps AAC/OPUS is even more than enough. See latest results for 96kbps.
http://www.hydrogenaud.io/forums/index.php?showtopic=106911

I do not want to see any tests!
I believe my eyes!
And I believe my program!
Adobe Audition shows that high frequencies are cut off! If decode a 128kbps.
And do not cut off if decode 240 kbps.

this 240 kbps:
1.jpg

this 128 kbps:
2.jpg

decoded your program!

[Atak_Snajpera]

I do not want to see any tests!
I believe my eyes!
And I believe my program!
What part of your body do you use when you listen to the music? Ears or eyes? Did you know that with progressing age your sensitivity to high frequencies drops? Sorry but you believe in placebo effect more than I do ;)

[Mastеr]

What part of your body do you use when you listen to the music? Ears or eyes? Did you know that with progressing age your sensitivity to high frequencies drops? Sorry but you believe in placebo effect more than I do ;)

ooooohhh Atak_Snajper - You're a terrible person! I'm not going to argue with you. And I will not use your program! Especially because it is all buggy and it cuts the sound. Bad author of the program will never write a good program.

[AlexKane]

ooooohhh Atak_Snajper - You're a terrible person! I'm not going to argue with you.
And I will not use your program! Especially because it is all buggy and it cuts the sound.
Bad author of the program will never write a good program.

Oooohhh, you need to tone it down a bit. If most people are fine with 128kb/s encodes then so be it.
No one invited you to use an application you don't seem to like.

[Mastеr]

ooooohhh Atak_Snajper - You're a terrible person! I'm not going to argue with you.
And I will not use your program! Especially because it is all buggy and it cuts the sound.
Bad author of the program will never write a good program.

Oooohhh, you need to tone it down a bit. If most people are fine with 128kb/s encodes then so be it.
No one invited you to use an application you don't seem to like.

you do not understand that everything has been moving to lossless quality! You live in the children's world! Play your sandbox!

[LoRd_MuldeR]

Please guys, there's no need to get personal!

@Mastеr:
Have a look at the forum rules again, especially rule #4 (http://forum.doom9.org/forum-rules.htm). You are free to share your opinion, but don't be rude!

[Wishbringer]

Except ears, they are not lossless...
The reason to move to lossless is: it's possible to create and with newer medias there is enough space.
The reason is NOT that the human ear can use it.

[slalom]

Adobe Audition shows that high frequencies are cut off! If decode a 128kbps.
And do not cut off if decode 240 kbps.
If you want quality, use "copy stream" in audio settings

[picman1]

I'm new to ripbot but from my use of the program especially the new 2 audio track beta it looks great but there is one thing I noticed and it is just me being picky. In testing Elysium to get the forced subtitles, the lossless track and the AC-3 core track. I used the xcopy feature for both audio tracks and noticed that the lossless(DTS-MA) shows up as an LPCM on my AVR. The AC-3 is fine. I understand LPCM is what all lossless tracks are but using xcopy I would have expected DTS-MA. The output played perfectly, nice job!

[guest]

ok so job created in beta didn't mux video file? Did you check logs then?

No, didn't mux video.

No, didn't check log's, don't know what to look for.

One thing that I didn't mention was that I am using the ripbot.exe that you posted separately the other day, not sure if that might have an affect.

I'll try again.

(edit)

OK, have tried Beta 2 again, and still has same problem :(...and another thing I have noticed is that I always used 1280 size, but it seems to default to 1920 when adding the next file to the queue.

It generally remembers the previous settings (in .1)

Also would like to make a comment about "Master", he's been registered since 2009, has hardly used the forum 'til now, then pisses everybody off. It's people like that, that spoil it for the rest of us.

[Atak_Snajpera]

No, didn't check log's, don't know what to look for.
Just post whole content of jobx_log.txt from /Logs/ folder. I will take a look.

...and another thing I have noticed is that I always used 1280 size, but it seems to default to 1920 when adding the next file to the queue.
Thanks. Bug confirmed on my pc as well.

[guest]

Just post whole content of jobx_log.txt from /Logs/ folder. I will take a look.


Thanks. Bug confirmed on my pc as well.

OK, I will endeavour to get you some info in the next day or so.

Also had a couple of encode's not do the final mux, using .1, after successfully doing about 8 or so encodes previous, with no problem.

I thought I might have been running out of room, but that's not the case...dunno what's going on :(

Thanks

[dslr-rookie]

Hello Atak,

here I reopen my first message.

Do you think it's easy to change in your interface and / or program code and you do want to realize it in further program versions - or not?

Thank you for paying me your attention.

best regards
dslr-rookie

Hello Atak,

I have a suggestion for a next version:
Cause I rename the media files by my own schema it is not helpful when the title section in the mkv is filled with the actual file name after convert. So I always have to remove this entry with mkvmerge for each file - or after Ripbot builts the CMDs and starts I edited this and remove manually the parameter --title "filename" in the jobxx_muxFiles.cmd. The reason is: any mediaplayer (like my Samsung TV) shows the title flag if available (it is not changeable), other media player shows always the filename.

Could you set an option for "title tag = filename" vs. "title tag= empty"? It's enough to find it in the INI files, dont need it to set in the graphical interface.

best regards
dslr-Rookie

[ShogoXT]

Hi everyone, Ive been trying to fiddle with avisynth through ripbot, as its layout has been very helpful for learning how filters work. I had a few questions for anyone who might have insight.

First off I have an issue: So far ive been using DVDfab to rip dvds in passthrough vob mode, which is the only way that works so far through ripbot. Result is a proper 29.97fps interlaced source. I use your IVTC to fix that part right.

DVD Decryptor doesnt split eps correctly.
Makemkv shows correct fps, but has major desync issues after going through ripbot.
DVDfab in passthrough mkv mode, shows 25 fps in ripbot, and cannot IVTC. More desyncs occur.
They all play fine in MPC-HC, and im too terrible with MKVtoolnix to make sure everything is ok there.

Best results have been with VOB mode with DVDfab, except for one episode.
Source Here (https://mega.co.nz/#!HExTTYgL!KB7C4FKNEndjvFfHNLEO1aIcF4yghUD5SOhzTEVxzBw)
This one shows as 24fps in ripbot, making it so I cannot IVTC.
Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 2
Format profile : Main@Main
Format settings, BVOP : Yes
Format settings, Matrix : Custom
Format settings, GOP : Variable
Duration : 44mn 12s
Bit rate mode : Variable
Bit rate : 4 475 Kbps
Maximum bit rate : 9 102 Kbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Scan order : 2:3 Pulldown
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.540
Time code of first frame : 01:00:03;20
Time code source : Group of pictures header
Stream size : 1.38 GiB (89%)
Visually the source looks interlaced still. Flag/tag issues? I dont know how to fix with mkvtoolnix :( . I used yadif in the meantime, but it doesnt look very good.

Second question, sorry for the long post.
Ive been learning avisynth through ripbot for the purposes of testing various denoisers for said sources.
HQDN3D works very well for anime, but doesnt seem so great for the tv show film ive been working on. I agree with you (you mentioned a long time ago your reasons for switching and optimal settings), about the temporal denoise setting.
Past 2 or 3 it ghosts like crazy, but temporal denoisers seem to have a much better result on my show so far, than using too much spacial.
From what ive learned from fft3dgpu (been using that since I have fast gpu and it works ok), isnt the result of ghosting from processing too many frames temporal? Such as 2 previous frames, current, and 2 frames ahead.

Reason I ask is because now id like to get motion compensation working with the denoisers ive been testing, including HQDN3D and fft3dgpu.
HQDN3D mentions nothing at all in its documentation on how many frames it uses for its temporal filter? Perhaps it goes through more with higher number?
With fft3dgpu, the Bt=2,3,or 4 setting determines it, so its easier to work with.

If i wanted to use mvtools2 to do the motion compensation for it, how do i set it up for your layout?
Such as how you set video="source" earlier in the code.
Mvtools2 documentation says this:
AVISource("c:\test.avi") # or MPEG2Source, DirectShowSource, some previous filter, etc
super = MSuper()
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(super, forward_vectors, thSCD1=500) # or use MCompensate
backward_compensation = MFlow(super, backward_vectors, thSCD1=500)
# create interleaved 3 frames sequences
interleave(forward_compensation, last, backward_compensation)

DeGrainMedian() # place your preferred temporal (spatial-temporal) denoiser here

selectevery(3,1) # return filtered central (not-compensated) frames only

To make it work for ripbot, do I do this? :
super = MSuper(video)
backward_vectors = MAnalyse(video,super, isb = true)
forward_vectors = MAnalyse(video,super, isb = false)
forward_compensation = MCompensate(video,super, forward_vectors, thSCD1=500)
backward_compensation = MCompensate(video,super, backward_vectors, thSCD1=500)
interleave(video?,forward_compensation, last, backward_compensation)
video=FFT3Dgpu(video,precision=2).f3kdb
selectevery(video?,3,1)
I understand the concept of the code, but im unsure where "video" would need to be so I dont need to re put the source each time and can just copy paste.

Thanks again for this excellent program! I tried very much to read as much as I could before bothering you guys.

[Atak_Snajpera]

If I'm not wrong your script should look like this.
super = MSuper(video)

backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)

forward_compensation = MFlow(super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(super, backward_vectors, thSCD1=500)

video=interleave(forward_compensation, last, backward_compensation)

video=FFT3Dgpu(video,precision=2).f3kdb

video=selectevery(video,3,1)


Best results have been with VOB mode with DVDfab, except for one episode.
Source Here
This one shows as 24fps in ripbot, making it so I cannot IVTC.
This sample does not require any IVTC. It is indexed as 23.976 fps and during preview I do not see any interlacing or frame duplication. Mediainfo also shows PROGRESSIVE scan type.

EDIT:
Ok I see interlacing artefacts during scene change. I guess this episode was originally encoded like that and we probably can do nothing about that.

[ShogoXT]

If I'm not wrong your script should look like this.
super = MSuper(video)

backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)

forward_compensation = MFlow(super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(super, backward_vectors, thSCD1=500)

video=interleave(forward_compensation, last, backward_compensation)

video=FFT3Dgpu(video,precision=2).f3kdb

video=selectevery(video,3,1)



This sample does not require any IVTC. It is indexed as 23.976 fps and during preview I do not see any interlacing or frame duplication. Mediainfo also shows PROGRESSIVE scan type.

EDIT:
Ok I see interlacing artefacts during scene change. I guess this episode was originally encoded like that and we probably can do nothing about that.

Thanks for looking at it and thanks for the script help! Yea pretty odd they would change that one episode, but the dvds have other issues so I guess I shouldnt be surprised.

[Atak_Snajpera]

I had miami vice dvd edition (the show from 80s) where first episode was also encoded in different way than rest. No idea why people in this industry do that.

[ShogoXT]

error: Script error: Invalid arguments to function "MFlow"
Hmm odd that it would pick out Mflow to be the error. If I didnt load mvtools2.dll right, wouldnt it pick out super first?

All I did was add a couple things to make it work with MT:
#Denoise
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\fft3dgpu\FFT3Dgpu.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\mvtools2\mvtools2.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
super = MSuper(video)
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(super, backward_vectors, thSCD1=500)
video=interleave(forward_compensation, last, backward_compensation)
SetMTmode(6)
video=FFT3Dgpu(video,precision=2).f3kdb
SetMTmode(2)
video=selectevery(video,3,1)

Havent tested it without MT though, il try to change it to MCompensate and report back.

EDIT: Same thing.
D:\>"C:\Ripbot264\tools\avs2yuv\avs2yuv.exe" "D:\Temp\RipBot264temp\job17\job17.avs" -o - |
"C:\Ripbot264\tools\x264\x264_x64.exe" --pass 1 --bitrate 850 --stats
"D:\Temp\RipBot264temp\job17\job17.stats" --fps 30000/1001 --force-cfr --min-keyint 30 --keyint 300
--frames 79211 --sar 1:1 --level 4.0 --preset slower --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --stdin y4m --output NUL -
error: Script error: Invalid arguments to function "MCompensate"
(D:\Temp\RipBot264temp\job17\job17.avs, line 35)
x264 [error]: could not open input file `-'

[slalom]

@Atak
Is it possible to (add) convert DTS-HD MA to DTS, through the audio settings?

[Atak_Snajpera]

Let me guess. You have mkv with DTS-MA and you want ripbot to automatically demux DTS-core during demuxing phase?

@ShogoXT
It turns out that video has to be added to function as well according to this
MFlow (clip source, clip super, clip vectors, float "time", int "mode", bool "fields", int "thSCD1", int "thSCD2", bool "isse", bool "planar")

so try this

#Denoise
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\fft3dgpu\FFT3Dgpu.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\mvtools2\mvtools2.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
super = MSuper(video)
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(video,super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(video,super, backward_vectors, thSCD1=500)
video=interleave(forward_compensation, last, backward_compensation)
SetMTmode(6)
video=FFT3Dgpu(video,precision=2).f3kdb
SetMTmode(2)
video=selectevery(video,3,1)

[picman1]

If you are thinking about doing core for DTS would it be to much to have core of other losseless tracks? Thanks for a great product!!!

[slalom]

Let me guess. You have mkv with DTS-MA and you want ripbot to automatically demux DTS-core during demuxing phase?
Not at demuxing, as an option through encoding settings

[Atak_Snajpera]

Is there any free DTS encoder? BTW. Why do you need DTS 1.5 mbps instead of AC3 640 kbps?

[slalom]

Tsmuxer is free
Doesn't DTS have better quality?

[Atak_Snajpera]

Tsmuxer is now a DTS encoder? Interesting...

[slalom]

Ok, this is how I do it
Takes only a few minutes

[stax76]

Is there any free DTS encoder? BTW. Why do you need DTS 1.5 mbps instead of AC3 640 kbps?

ffmpeg can encode DTS, I just tried it.

eac3to requires a external encoder:

Encoding DTS <768kbps> with Surcode...
Surcode DTS Encoder doesn't seem to be installed.

[ShogoXT]

Let me guess. You have mkv with DTS-MA and you want ripbot to automatically demux DTS-core during demuxing phase?

@ShogoXT
It turns out that video has to be added to function as well according to this
MFlow (clip source, clip super, clip vectors, float "time", int "mode", bool "fields", int "thSCD1", int "thSCD2", bool "isse", bool "planar")

so try this

#Denoise
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\fft3dgpu\FFT3Dgpu.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\mvtools2\mvtools2.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
super = MSuper(video)
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(video,super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(video,super, backward_vectors, thSCD1=500)
video=interleave(forward_compensation, last, backward_compensation)
SetMTmode(6)
video=FFT3Dgpu(video,precision=2).f3kdb
SetMTmode(2)
video=selectevery(video,3,1)

Thanks a lot! Should look great.

Im at season 6 now, and now a new problem has popped up on the sources. As before they play fine on MPC-HC, but now when put into Ripbot, there are sound out of sync issues.
Source here (https://mega.co.nz/#!bNgVlR7a!F0ZPF_Qur4BYtpZvBzeFux8Ud74-BoFBs4xt1Jvdh_g)
I can manually go by ear and fix it with your set audio delay setting, but im wondering if I missed something else that would allow ripbot to take care of the audio sync automatically.

Thanks again!

EDIT: I tried to put in that script, now "avs2avi.exe has stopped working" comes up. Guess I was pushing my luck.
EDIT2: Tried closer to the original script like this:
#Denoise
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\fft3dgpu\FFT3Dgpu.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\mvtools2\mvtools2.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
MPEG2Source("D:\Temp\RipBot264temp\job3\job3.d2v")
super = MSuper()
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(super, backward_vectors, thSCD1=500)
interleave(forward_compensation, last, backward_compensation)
SetMTmode(6)
video=FFT3Dgpu(video,sigma=1.5,mode=1,sharpen=0.2,precision=2).f3kdb
SetMTmode(2)
selectevery(3,1)
I made a typo before because I was missing a ")", but as soon as i fixed it, avs2avi crashed again. Also tried without MT.

[Atak_Snajpera]

Try without FFT3Dgpu. Use CPU version. Instead of encoding and waiting for avs2yuv to crash you can use AVSMeter to check avs processing stability.

[ShogoXT]

Try without FFT3Dgpu. Use CPU version. Instead of encoding and waiting for avs2yuv to crash you can use AVSMeter to check avs processing stability.

With your script, it says "interleave argument invalid". With this one and the gpu one, it crashes avsmeter:
#Denoise
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\fft3d\FFT3Dfilter.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\mvtools2\mvtools2.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
MPEG2Source("D:\Temp\RipBot264temp\job3\job3.d2v")
super = MSuper()
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(super, backward_vectors, thSCD1=500)
interleave(forward_compensation, last, backward_compensation)
SetMTmode(6)
video=FFT3Dfilter(video,sigma=1.5,sharpen=0.2).f3kdb
SetMTmode(2)
selectevery(3,1)
Il try reinstalling a few things tomorrow, as the main post recommends. Im using avisynth 2.6 plus the MT addon currently, pretty sure I have the new haali as well. FFDshow is hard to find current versions since lav filters pretty much killed it.

[Atak_Snajpera]

Last attempt
#Denoise
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\fft3dgpu\FFT3Dgpu.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\mvtools2\mvtools2.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
super = MSuper(video)
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(video,super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(video,super, backward_vectors, thSCD1=500)
video=interleave(forward_compensation,backward_compensation)
SetMTmode(6)
video=FFT3Dgpu(video,precision=2).f3kdb
SetMTmode(2)
video=selectevery(video,3,1)

[ShogoXT]

Last attempt
#Denoise
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\fft3dgpu\FFT3Dgpu.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\mvtools2\mvtools2.dll")
LoadPlugin("C:\Ripbot264\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
super = MSuper(video)
backward_vectors = MAnalyse(super, isb = true)
forward_vectors = MAnalyse(super, isb = false)
forward_compensation = MFlow(video,super, forward_vectors, thSCD1=500)
backward_compensation = MFlow(video,super, backward_vectors, thSCD1=500)
video=interleave(forward_compensation,backward_compensation)
SetMTmode(6)
video=FFT3Dgpu(video,precision=2).f3kdb
SetMTmode(2)
video=selectevery(video,3,1)

Still crash. Thank you very much for trying though.

Il probably just use the settings I had before without the motion comp. I wonder why they dont have more plugin filters with motion comp already? Mdegrain didnt seem very good and filters like the dust family doesnt work with yv12 correct?
Love some temporal denoisers, just a bit too much ghosting sometimes.

Also I did make sure to reinstall to avisynth 2.6 RC 2, then put in the MT dll. Would Avisynth+ work better?

[emmaurilio]

Hi! I need some help with the filenames after the encoding with RipBot. A example of that happens:

Before: 20150413 Bate Bola 1ª Edição HD Edited 10.mpg
After: 20150413 Bate Bola 1¬ EdiþÒo HD Edited 10.mkv

Thanks.

[slalom]

What kind of help do you need?
You can always rename the file

[emmaurilio]

What kind of help do you need?
You can always rename the file

I need help to automate the process, so that the RipBot save the name correctly with the special characters. I do about 30 daily conversions and I need to rename an average of 25 files every day.

RipBot is a great tool that made possible my hobby, and help me further and I would save time if I could find out how I can do that. I don´t know if I´m doing something wrong or it is a restriction of the software.

Thanks.

[jonah]

Looking at building an encoding machine to take advantage of the scaling functions of Ripbot. I can get my hands on some cheap Xeon-based servers, ie. with dual Quad-core Xeons.
How well does Ripbot function on machines with more than one CPU? I know it scales pretty well with multiple cores/threads, but how about on a rig with multiple CPUs?

[Atak_Snajpera]

It will work fine. All cores will be nicely saturated.

[Jake802]

I keep getting the following demuxing error.....

eac3to v3.27
command line: "C:\Program Files\RipBot264 Version 1.18.1\Tools\eac3to\eac3to.exe" "D:\Videos\The Punisher Collection\PUNISHER_BD\" 1) 2: "C:\Temp\RipBot264temp\job1\video.mkv" -seekToIFrames 3: "C:\Temp\RipBot264temp\job1\audio_English.core.dts" -core 5: "C:\Temp\RipBot264temp\job1\5_subtitles_English_1080.sup" 6: "C:\Temp\RipBot264temp\job1\6_subtitles_Spanish_1080.sup" 1: "C:\Temp\RipBot264temp\job1\chapters.txt" -progressnumbers -log="C:\Temp\RipBot264temp\job1\demuxlog.txt"
------------------------------------------------------------------------------
M2TS, 1 video track, 2 audio tracks, 2 subtitle tracks, 24p /1.001
1: Chapters, 14 chapters
2: MPEG2, 1080p24 /1.001 (16:9)
3: DTS-ES, English, 6.1 channels, 1509kbps, 48kHz, dialnorm: -4dB
4: AC3 EX, English, 5.1 channels, 640kbps, 48kHz, dialnorm: -27dB
5: Subtitle (PGS), English
6: Subtitle (PGS), Spanish
Creating file "C:\Temp\RipBot264temp\job1\chapters.txt"...
[a03] Extracting audio track number 3...
[v02] Extracting video track number 2...
[s06] Extracting subtitle track number 6...
[s05] Extracting subtitle track number 5...
[a03] Removing DTS dialog normalization...

Any idea as to what I am doing wrong?