RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Atak_Snajpera]

show me content of Blu-Ray_structure_info.txt and Blu-Ray_title1_info.txt

[Grayfox]

Blu-Ray_structure_info
eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" -log="I:\Temp\RipBot264temp\job2\Blu-Ray_structure_info.txt"
------------------------------------------------------------------------------
1) 00001.mpls, 00001.m2ts+00002.m2ts, 2:23:11
- Chapters, 16 chapters
- h264/AVC, 1080p24 /1.001 (16:9)
- RAW/PCM, English, multi-channel, 48kHz
- AC3, English, multi-channel, 48kHz
- DTS, French, multi-channel, 48kHz
- AC3, French, multi-channel, 48kHz
- DTS, Spanish, multi-channel, 48kHz
- AC3, Spanish, multi-channel, 48kHz

2) 00020.mpls, 00021.m2ts, 0:51:49
- Chapters, 43 chapters
- h264/AVC, 1080i60 /1.001 (16:9)
- AC3, English, multi-channel, 48kHz
- AC3, French, stereo, 48kHz
- AC3, Spanish, stereo, 48kHz


Blu-Ray_title1_info

eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" 1) -log="I:\Temp\RipBot264temp\job2\Blu-Ray_title1_info.txt"
------------------------------------------------------------------------------
The program type (4352) changes from video to audio. <ERROR>
The format of the source file could not be detected. <ERROR>

[fatpizza]

I'm getting the error "avs2avi.exe has stopped working" with VC-1 sources.

I've uninstalled and reinstalled ffdshow, AviSynth and Haali Media Splitter with a reboot in between and reinstalled Ripbot264.

ffdshow video decoder is set to wmv9 for VC-1.

I'm running Windows 10 Pro 64bit with Windows Media Player 12.

Can anyone help? Thanks.

I always have those issues with VC1 unless I set the decoder to intel quicksync in ffdshow. Solves all my problems.

[wraith]

Hi All. Noob to Ripbot, trying to take advantage of the Distributed Encoding feature.
So far I’ve been unable to get an encode to continue past the window with the text at the bottom declaring “Please Wait… Copying tools to shared folder…” Shortly after this window appears, it drops back to the main window. The last line in the log file says:
Error: The file 'D:\Temp\RipBot264temp\video.265' could not be opened for reading: open file error.
I’ve searched the forum and google and have come across a couple posts that raise the same issue with the video.264 file. Taking into account the RipBot264 Distributed Encoding Tutorial and the few posts I’ve found, I’ve:
• Setup RipBot264 to run as Administrator
• Set the necessary flags in RipBot264.ini
• Set Temp to D:\TEMP [only folder designation that seems to work]
• Shared the D:\TEMP\RIPBOT264TEMP directory and confirmed can be accessed from other Server computers on the same network
Despite the above, I still get the error.
Greatly appreciate any assistance on resolving this

[FuzzyNutz]

I always have those issues with VC1 unless I set the decoder to intel quicksync in ffdshow. Solves all my problems.

How? My VC-1 decoder choices for ffdshow are 'libavcodec' or 'wmv9'.

[Atak_Snajpera]

Hi All. Noob to Ripbot, trying to take advantage of the Distributed Encoding feature.
So far I’ve been unable to get an encode to continue past the window with the text at the bottom declaring “Please Wait… Copying tools to shared folder…” Shortly after this window appears, it drops back to the main window. The last line in the log file says:
Error: The file 'D:\Temp\RipBot264temp\video.265' could not be opened for reading: open file error.
I’ve searched the forum and google and have come across a couple posts that raise the same issue with the video.264 file. Taking into account the RipBot264 Distributed Encoding Tutorial and the few posts I’ve found, I’ve:
• Setup RipBot264 to run as Administrator
• Set the necessary flags in RipBot264.ini
• Set Temp to D:\TEMP [only folder designation that seems to work]
• Shared the D:\TEMP\RIPBOT264TEMP directory and confirmed can be accessed from other Server computers on the same network
Despite the above, I still get the error.
Greatly appreciate any assistance on resolving this

Record your desktop with fraps or similar software and upload on youtube or somewhere. This will help me to understand what is happening on your pc.

[Atak_Snajpera]

Blu-Ray_structure_info
eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" -log="I:\Temp\RipBot264temp\job2\Blu-Ray_structure_info.txt"
------------------------------------------------------------------------------
1) 00001.mpls, 00001.m2ts+00002.m2ts, 2:23:11
- Chapters, 16 chapters
- h264/AVC, 1080p24 /1.001 (16:9)
- RAW/PCM, English, multi-channel, 48kHz
- AC3, English, multi-channel, 48kHz
- DTS, French, multi-channel, 48kHz
- AC3, French, multi-channel, 48kHz
- DTS, Spanish, multi-channel, 48kHz
- AC3, Spanish, multi-channel, 48kHz

2) 00020.mpls, 00021.m2ts, 0:51:49
- Chapters, 43 chapters
- h264/AVC, 1080i60 /1.001 (16:9)
- AC3, English, multi-channel, 48kHz
- AC3, French, stereo, 48kHz
- AC3, Spanish, stereo, 48kHz


Blu-Ray_title1_info

eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" 1) -log="I:\Temp\RipBot264temp\job2\Blu-Ray_title1_info.txt"
------------------------------------------------------------------------------
The program type (4352) changes from video to audio. <ERROR>
The format of the source file could not be detected. <ERROR>


Are you sure that your movie has been correctly decrypted? Can you play that playlist 00001 in MPC-HC?
Can you also show me mediainfo reports of 00001.m2ts and 00002.m2ts ?

[FuzzyNutz]

I always have those issues with VC1 unless I set the decoder to intel quicksync in ffdshow. Solves all my problems.

I reinstalled ffdshow using a modified version that allowed me to pick Intel's QuickSync for VC-1 decoding and I enabled my CPU's integrated graphics via BIOS configuration. VC-1 encoding is now working. Thank you, fatpizza.

It seems each time I open Ripbot264, the ffdshow encoder for VC-1 changes back to 'wmv9'. I have to change it to QuickSync after opening Ripbot264 when dealing with VC-1.

[fatpizza]

I reinstalled ffdshow using a modified version that allowed me to pick Intel's QuickSync for VC-1 decoding and I enabled my CPU's integrated graphics via BIOS configuration. VC-1 encoding is now working. Thank you, fatpizza.

It seems each time I open Ripbot264, the ffdshow encoder for VC-1 changes back to 'wmv9'. I have to change it to QuickSync after opening Ripbot264 when dealing with VC-1.

I have to do it every time I reboot which is annoying. But at least it works. :)

[FuzzyNutz]

I have to do it every time I reboot which is annoying. But at least it works. :)

Thanks again.

[Grayfox]

Are you sure that your movie has been correctly decrypted? Can you play that playlist 00001 in MPC-HC?
Can you also show me mediainfo reports of 00001.m2ts and 00002.m2ts ?

Movie plays fine when decrypted when double clicking on index.bdmv or double clicking on 00001.m2ts , I decrypted it it twice just in case.

00001.m2ts media info

General
ID : 0 (0x0)
Complete name : E:\BDMV\STREAM\00001.m2ts
CompleteName_Last : E:\BDMV\STREAM\00050.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 40.8 GiB
Duration : 3 s 968 ms
Overall bit rate mode : Variable
Overall bit rate : 88.3 Gb/s
Maximum Overall bit rate : 48.0 Mb/s

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Codec ID : 27
Duration : 4 s 4 ms
Bit rate : 84.8 Gb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 1704.834
Stream size : 39.5 GiB (97%)

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Muxing mode : Blu-ray
Codec ID : 128
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 4 608 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Bit depth : 16 bits
Delay relative to video : -1 ms
Stream size : 2.18 MiB (0%)

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 310 KiB (0%)

Audio #3
ID : 4354 (0x1102)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : ES Matrix / Core
Mode : 16
Format settings, Endianness : Big
Codec ID : 130
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 1 509 kb/s
Channel(s) : 7 channels / 6 channels
Channel positions : Front: L C R, Side: L R, Back: C, LFE / Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 spf)
Bit depth : 24 bits
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 731 KiB (0%)

Audio #4
ID : 4355 (0x1103)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 310 KiB (0%)

Audio #5
ID : 4356 (0x1104)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : ES Matrix / Core
Mode : 16
Format settings, Endianness : Big
Codec ID : 130
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 1 509 kb/s
Channel(s) : 7 channels / 6 channels
Channel positions : Front: L C R, Side: L R, Back: C, LFE / Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 spf)
Bit depth : 24 bits
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 731 KiB (0%)

Audio #6
ID : 4357 (0x1105)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 310 KiB (0%)

Text #1
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #2
ID : 4609 (0x1201)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #3
ID : 4610 (0x1202)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #4
ID : 4611 (0x1203)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #5
ID : 4612 (0x1204)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #6
ID : 4613 (0x1205)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #7
ID : 4614 (0x1206)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #8
ID : 4615 (0x1207)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 9 s 801 ms

Text #9
ID : 4616 (0x1208)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #10
ID : 4617 (0x1209)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #11
ID : 4618 (0x120A)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #12
ID : 4619 (0x120B)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #13
ID : 4620 (0x120C)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #14
ID : 4621 (0x120D)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #15
ID : 4622 (0x120E)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

[Grayfox]

Are you sure that your movie has been correctly decrypted? Can you play that playlist 00001 in MPC-HC?
Can you also show me mediainfo reports of 00001.m2ts and 00002.m2ts ?

Hit the 16,000 char limit so split post into 2.

00002.m2ts media info

General
ID : 0 (0x0)
Complete name : E:\BDMV\STREAM\00002.m2ts
CompleteName_Last : E:\BDMV\STREAM\00050.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 8.93 GiB
Duration : 3 s 968 ms
Overall bit rate mode : Variable
Overall bit rate : 19.3 Gb/s
Maximum Overall bit rate : 48.0 Mb/s

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : 27
Duration : 4 s 54 ms
Bit rate : 18.6 Gb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 373.426
Stream size : 8.74 GiB (98%)

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #3
ID : 4354 (0x1102)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #4
ID : 4355 (0x1103)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #5
ID : 4356 (0x1104)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #6
ID : 4357 (0x1105)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Text #1
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #2
ID : 4609 (0x1201)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #3
ID : 4610 (0x1202)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #4
ID : 4611 (0x1203)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #5
ID : 4612 (0x1204)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #6
ID : 4613 (0x1205)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #7
ID : 4614 (0x1206)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #8
ID : 4615 (0x1207)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #9
ID : 4616 (0x1208)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #10
ID : 4617 (0x1209)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #11
ID : 4618 (0x120A)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #12
ID : 4619 (0x120B)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #13
ID : 4620 (0x120C)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #14
ID : 4621 (0x120D)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #15
ID : 4622 (0x120E)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

[Atak_Snajpera]

@Grafox
This is what I suspected.
Audio 1 in first file is PCM while in second file is AC-3.

I'm afraid you will have to manually separate those streams in some Eac3toGUI or in MKVToolnix.

[wraith]

Hi. I've saved a couple videos [due to Fraps 30sec limitation] to here: https://1drv.ms/f/s!Aszu1bOAzXDajgMAgzV9w6eDDWjK.

The first video is the initial setup [copy video to temp directory etc]. The second video is copy the shared files etc. It "crashes out" just after the video stops

[Atak_Snajpera]

Hi. I've saved a couple videos [due to Fraps 30sec limitation] to here: https://1drv.ms/f/s!Aszu1bOAzXDajgMAgzV9w6eDDWjK.

The first video is the initial setup [copy video to temp directory etc]. The second video is copy the shared files etc. It "crashes out" just after the video stops

Do not press manually ON button. (I'm even surprised that you are actually able to do that because on my machine it is impossible). Encoding client will connect with specified servers automatically.

[wraith]

Do not press manually ON button. (I'm even surprised that you are actually able to do that because on my machine it is impossible). Encoding client will connect with specified servers automatically.

Noted :)
FYI - the error occurs regardless whether I manually click the 'ON' button or not

[Atak_Snajpera]

Noted :)
FYI - the error occurs regardless whether I manually click the 'ON' button or not

Use this version of EncodingClient.exe (http://www.mediafire.com/download/xy66s7t686az95g/EncodingClient.exe) and show me error message in EncodingClient_crash_message.txt

[wraith]

Use this version of EncodingClient.exe (http://www.mediafire.com/download/xy66s7t686az95g/EncodingClient.exe) and show me error message in EncodingClient_crash_message.txt

Downloaded the above file into the RipBot directory. The program continues to crashes out. No EncodingClient_crash_message.txt can be found in either the job1 folder or the Ripbot folder. Should I be looking somewhere else?

If it helps, the contents of job1_log.txt follows:

D:\>"D:\Ripbot\EncodingClient.exe" "D:\Temp\RipBot264temp\job1\job1_EncodingClient.meta"

D:\>"D:\Ripbot\tools\mkvtoolnix\mkvmerge.exe" -o "D:\Trial.mkv" --compression 0:none --title "Trial" --default-duration 0:24000/1001fps "D:\Temp\RipBot264temp\video.265" --compression 0:none --language 0:eng --sync 0:0 "D:\Temp\RipBot264temp\job1\1_audio_English.ac3" --chapters "D:\Temp\RipBot264temp\job1\chapters.txt"
mkvmerge v9.3.1 ('Mask Machine') 32bit
Error: The file 'D:\Temp\RipBot264temp\video.265' could not be opened for reading: open file error.
-------------------------

Elapsed Time: 00h:00m:30s

Incidentally, the first file I tried was a small 2Gb H265 video. I ripped a small 300Mb+ file using MakeMKV and tried that. Still the same issue.

[stasi]

Hey Atak.
Drag and Drop into RipBot window would be nice. Any plans for that?

[wraith]

Use this version of EncodingClient.exe (http://www.mediafire.com/download/xy66s7t686az95g/EncodingClient.exe) and show me error message in EncodingClient_crash_message.txt

Hi Atak,
Tried the EncodingClient provided. Still crashed and no .txt file was created. Not that I could find in the job1 or Ripbot folder.

I created a more detailed reply but this has not made it to the forum, for some reason. I can only assume it's been flagged for review [I tried to re-create the post, via copy and paste, and I was informed it was a duplicate]

[wraith]

Hi Atak. Tried, again, with the EncodingClient provided. No luck. Same issue and no txt file is created. Not in the Ripbot or job1 file anyway.

I created a detailed post a few days ago. I suspect that, as it was quote of yours with the link to the EncodingClient, it has yet to be released. Not being sure when it would be, I decided to post again. Apologies to the Moderator if this is the case.

[Atak_Snajpera]

So I guess something else is terminating EncodingClient.exe. If EncodingClient.exe crashes it should generate file with error message. No .txt means no crash.

[Jake802]

I have a question I am using the Onboard Realtek Audio from an ASUS 970 Pro Gaming/Aura Motherboard. It has worked with No Issues, the minute I start encoding with RipBot264, the audio goes from being all crackly to completely losing audio at times and I have to uninstall and reinstall the drivers. Any ideas as to why this would occur? Thanks!

[Atak_Snajpera]

Update audio drivers
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false

[Zetti]

Why is there still needed for both FFDshow and Haali Media Splitter and not LAV Filters??

Any plans for change??

[Atak_Snajpera]

If ain't broke don't fix it

[Zetti]

I know but me and maybe other just use LAV Filters and not FFDshow, Haali Media Splitter and Lav Filters or just FFDshow and Haali Media Splitter.

[fantasmanegro]

I know but me and maybe other just use LAV Filters and not FFDshow, Haali Media Splitter and Lav Filters or just FFDshow and Haali Media Splitter.

From your point of view...

what is the benefit or advantage of using LAV or FFDSHOW over Haali??...

[Zetti]

I don't use FFDshow and Haali Media Splitter anymore, because its not updated in some years.

And i don't want to have different decoders and splitters, i think also others have same point of view like me.

But maybe a day Atak_Snajpera will make an option for chose between FFDshow and Haali Media Splitter or LAV Filters.

[fantasmanegro]

I don't use FFDshow and Haali Media Splitter anymore, because its not updated in some years.

And i don't want to have different decoders and splitters

I agree with that... :goodpost:

[klopsknoedel]

But maybe a day Atak_Snajpera will make an option for chose between FFDshow and Haali Media Splitter or LAV Filters.

I think that is the point. There is no need to switch completely but giving an (hidden) option to choose LAV could satisfy both sites.

[Zetti]

Absolutely. :)

[soneca]

So far I do not use Lav Filters, but I think the Atak should take into consideration this update.

[nekrosoft13]

any chance could you add Flac audio support?

[Ronski]

I started a batch distributed encode going this morning, added the two files I was working with and set it going.

I noticed that the encoding client was alternating between encoding and not for all three servers, I looked in the server window and found an error of file not found, so aborted it. It then carried on with the next job.

Looking in the Ripbot window I saw an error for Job 2 and realised what had happened, job 1 and 2 were old jobs which I hadn't cleared off the list, but I'd deleted the source files, I must have inadvertently ticked job 2 thus adding it to the batch job.

I use the option to move the source file, so surely an error should have been logged here if the file is missing and the job skipped rather than trying to encode it?

[BlockABoots]

Im trying to preview my script (via the AviSynth button) but when i click on the preview i get the following.....

http://i.imgur.com/hY26iKp.jpg

anu ideas how to fix that?

Also is there a way to increase or increase the Audio Delay option manual, other than the 50 value increments ?

[Atak_Snajpera]

1) Activate YV12 decoder in FFDShow
http://i.cubeupload.com/20R9pU.png

2) manually change value in script
http://i.cubeupload.com/Dvd2st.png

[BlockABoots]

Thanks!

[guest]

Have been trying the process Warcraft 3D, which has TrueHD ATMOS 7.1 audio (as well as an AC3 track), and when trying to prepare for encoding, it states that it's converting ATMOS to flac, but after quite a long time, it fails.

Any hints ??

Also, I've also noticed that the embedded version of MKVToolNix is v9.3.1, whereas the latest version is 9.4.2.....

[Ronski]

@Burt123 I use MKVTOOLNIX to extract just the video, then process that, then use MKVToolnix to mux the audio, subtitles, chapters etc back in. This way I retain the Atmos and audio tracks exactly as they are as I have an Atmos system, but the audio is usually bigger than the video part using H265.

[zazon]

Hey Everybody -

The last couple Blu rays I've bought seem to have the audio off for a half second or so for last half of the movie. Anything I can look into to fix this? Thanks for any help.

[Jake802]

I am have this problem lately too. Stuff is finishing out of sync.

[slalom]

Check fps on job window. If it is not correct, press Avisynth, then >, and select output speed, assume -> x.xx fps
Re-run the job

[Jake802]

Thanks I will try that, Thanks again for the help.

[Jake802]

I am having a problem with the cover option too. I hit the Cover Button and I get a Popup JPEG Error 53 Msg, Hit Ok and then the Cover Search Option comes up. I do my search and when I select my choice, I then get a popup with an Cannot Open AVI Msg. I hit OK and the whole thing freezes up.

[zazon]

Check fps on job window. If it is not correct, press Avisynth, then >, and select output speed, assume -> x.xx fps
Re-run the job

Thank you for the reply. If the movie is synced for the first half, but not the second half, how would changing the FPS fix this? I'm assuming FPS is a constant, though I don't know much. Thanks again.

[slalom]

My suggestion was in the case where the fps where different in the job and the file
I can't help you with the other

[magmo23]

If the solution is to unistall codecs then how am I supposed to be able to use the ripbot264 application?

AviSynth Error message or other decoding problem (avs2avi.exe/avs2yuv.exe crashes)
Uninstall all codec packs , AviSynth , Haali Media Spliter , ffdshow. XP users also must install Windows Media Player 11!

[Atak_Snajpera]

Just install what is required by RipBot264. Nothing more , nothing less.

[byteshare]

Any chance to include QTGMC (3.33) for better Deinterlace/decomb?
Or Temporal Degrain for better denoise?
Both are filters for AVISynth and AVISynth+
----
Or, any help on how to make it work myself. I know I can manually edit the avisynth script, but I don't know how to make it work with Distributed Encoding (so that all the right plugins get to the other machines.