RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[stasi]

What is an original file? .m2ts or .mkv?

MKV Container.

[Atak_Snajpera]

Looks like damaged audio stream at the very end of file. Does simple remuxing with mkvtoolnix or eac3to works?

[stasi]

Looks like damaged audio stream at the very end of file. Does simple remuxing with mkvtoolnix or eac3to works?

You are right. I created 50MB parts with MKVToolnix. I added random files to Ripbot, and they all work, except the last file.


Edit:
Please check your PM.

[soneca]

Back to normal, decoding the DTS-MA track again after the last update.

[stasi]

Back to normal, decoding the DTS-MA track again after the last update.

Works for me, too. NICAudio is back.

[Shrekage]

After updating all 16 of my encoding servers and my encoding client to 1.21.0 and latest updates, the servers are ALL now giving me this error:

Encoding started...
""\\EC3\Ripbot264temp\tools\avs2yuv\avs2yuv.exe" -seek 0 "\\EC3\RipBot264temp\job285\Chunks\1.avs" -o - | "\\EC3\Ripbot264temp\tools\x264\x264_x64.exe" --crf 20 --fps 30000/1001 --force-cfr --min-keyint 30 --keyint 300 --frames 1800 --sar 8:9 --level 3.1 --aud --nal-hrd vbr --vbv-bufsize 14000 --vbv-maxrate 14000 --no-cabac --weightp 0 --b-pyramid none --no-8x8dct --stdin y4m --output "\\EC3\RipBot264temp\job285\Chunks\1.264" -"
error: failed to load avisynth.dll
y4m [error]: bad sequence header magic
x264 [error]: could not open input file `-'

Encoding terminated.


Connection Closed Gracefully.

I uninstalled AviSynth and installed the batch file for AVISynth+ in your script. I created new encoding jobs as the release notes specify, but still I meet this error, and the encoding servers close the connection.

[byteshare]

@Shrekage What version does the Encoding Server say AVISynth+ is on?

[guest]

I'm getting an annoying random error....

I can queue a job, make adjustments, start the encode, and shortly after it's gathered information, it pop's up an error msg, saying that it can't find that job's "info.txt".....somehow it get's deleted, and the show's over.

This is with the latest version & latest update....

I know I've had this happen before, and pretty sure I was given a "fix", but that was a long time ago :(

Anyone have any idea's ???

[george84]

In Version 1.21.0 two checkboxes have disappeared in Advanced Settings (Use 64bit encoder, Use Avisynth+ MT).

Also I get error message "cannot load 32bit DLL in 64 bit Avisynth".

How can I force use of 32 bit Avisynth?

[jandor]

Atak,

Put an option (check box) under Settings: >>>> Minimize to Taskbar.
Let RipBot open normally, and at your command you can minimize it to the Taskbar.
Minimizing to the Taskbar is my preference, and I believe it is also that of many users.

[Atak_Snajpera]

In Version 1.21.0 two checkboxes have disappeared in Advanced Settings (Use 64bit encoder, Use Avisynth+ MT).

Also I get error message "cannot load 32bit DLL in 64 bit Avisynth".

How can I force use of 32 bit Avisynth?

v1.21.0 always uses 64 bit encoder and requires AviSynth+ MT x64 (and 64 bit plugins!). Encoding on 32bit AviSynth is no longer possible. If you really need 32bit then I can only advise you to forget about newer version and stay with 1.20.0

[Atak_Snajpera]

After updating all 16 of my encoding servers and my encoding client to 1.21.0 and latest updates, the servers are ALL now giving me this error:

Encoding started...
""\\EC3\Ripbot264temp\tools\avs2yuv\avs2yuv.exe" -seek 0 "\\EC3\RipBot264temp\job285\Chunks\1.avs" -o - | "\\EC3\Ripbot264temp\tools\x264\x264_x64.exe" --crf 20 --fps 30000/1001 --force-cfr --min-keyint 30 --keyint 300 --frames 1800 --sar 8:9 --level 3.1 --aud --nal-hrd vbr --vbv-bufsize 14000 --vbv-maxrate 14000 --no-cabac --weightp 0 --b-pyramid none --no-8x8dct --stdin y4m --output "\\EC3\RipBot264temp\job285\Chunks\1.264" -"
error: failed to load avisynth.dll
y4m [error]: bad sequence header magic
x264 [error]: could not open input file `-'

Encoding terminated.


Connection Closed Gracefully.

I uninstalled AviSynth and installed the batch file for AVISynth+ in your script. I created new encoding jobs as the release notes specify, but still I meet this error, and the encoding servers close the connection.

What do you get here?
http://i.cubeupload.com/hRcer8.png

[Atak_Snajpera]

I'm getting an annoying random error....

I can queue a job, make adjustments, start the encode, and shortly after it's gathered information, it pop's up an error msg, saying that it can't find that job's "info.txt".....somehow it get's deleted, and the show's over.

This is with the latest version & latest update....

I know I've had this happen before, and pretty sure I was given a "fix", but that was a long time ago :(

Anyone have any idea's ???

When you get that message ,open \Chunks\getinfo.avs in MPC-HC (x64) and show me what error message pops-up. Also show me content of that file.

[Shrekage]

@Shrekage What version does the Encoding Server say AVISynth+ is on?


The bottom line of the server status window reads:

V1.8.1.0 | AviSynth+ 0.1 (r2508, MT, x86_64)

[george84]

v1.21.0 always uses 64 bit encoder and requires AviSynth+ MT x64 (and 64 bit plugins!). Encoding on 32bit AviSynth is no longer possible. If you really need 32bit then I can only advise you to forget about newer version and stay with 1.20.0

Can these two versions coexist?

[Atak_Snajpera]

Can these two versions coexist?

Yes .

[Atak_Snajpera]

The bottom line of the server status window reads:

V1.8.1.0 | AviSynth+ 0.1 (r2508, MT, x86_64)

Show me content of Chunks\1.avs

[Shrekage]

Show me content of Chunks\1.avs

#MT



#VideoSource
LoadPlugin("\\EC3\RipBot264temp\Tools\AviSynth plugins\ffms\ffms_latest\x64\ffms2.dll")
video=FFVideoSource("\\EC3\RipBot264temp\job285\video.mkv",threads=1,cachefile = "\\EC3\RipBot264temp\job285\video.mkv.ffindex").ConvertToYV12(matrix="rec709").AssumeFPS(29.970)
#Deinterlace



#Decimate



#Crop



#Resize



#Levels



#Colours



#Denoise



#Subtitles
Loadplugin("\\EC3\RipBot264temp\Tools\AviSynth plugins\VSFilter\VSFilter.dll")
video=VobSub(video,"\\EC3\RipBot264temp\job285\2_subtitles_Undetermined.sub")



#Custom



#Prefetch



#AudioSource



#Triming



#AVSameLength
video=Trim(video,0,1799)


#ColorSpace



#Return
return video

[POTI]

I am getting a similar error after the last upgrade. I removed AVISynth 2.6 and reinstalled it. Same error. It doesn't always error. I can process a video fine one time and then the next I get this error.

C:\>"C:\Program Files (x86)\RipBot264\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job1\job1.avs" -o - | "C:\Program Files (x86)\RipBot264\tools\x264\x264_x64.exe" --crf 20 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 172158 --sar 32:27 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --b-pyramid none --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -
error: I don't know what "video" means
(C:\Temp\RipBot264temp\job1\job1_a1.avs, line 23)
(C:\Temp\RipBot264temp\job1\job1.avs, line 1)
y4m [error]: bad sequence header magic
x264 [error]: could not open input file `-'

C:\>"C:\Program Files (x86)\RipBot264\tools\mp4box\mp4box.exe" -tmp "C:\Temp\RipBot264temp" -add "C:\Temp\RipBot264temp\video.264":name="Movie" -fps 23.976 -add "C:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac":lang=und -mpeg4 -chap "C:\Temp\RipBot264temp\job1\chapters.txt" -new "D:\DVD\Movie.mp4"
Cannot find H264 start code
Error importing C:\Temp\RipBot264temp\video.264:name=Movie: BitStream Not Compliant
-------------------------

Elapsed Time: 00h:00m:02s

[guest]

When you get that message ,open \Chunks\getinfo.avs in MPC-HC (x64) and show me what error message pops-up. Also show me content of that file.

Hi Atak,

Have captured both error messages, as requested...

Not sure what you mean by "Also show me content of that file" ?

Hopefully this link will work, haven't used Mediafire for a long time.

https://www.mediafire.com/file/1201r1acpsz8s80/both%20error%20msg%27s.jpg

:thanks:

[Atak_Snajpera]

Not sure what you mean by "Also show me content of that file" ?
Just upload \Chunks\getinfo.avs to mediafire

[guest]

Just upload \Chunks\getinfo.avs to mediafire

OK, but I think I may have deleted it, but I'm sure I'd be able to replicate it....I'll let you know.

Having said that, I successfully encoded several movies today, without issue (using the very latest update)...maybe this file that is giving me the issues is put together wrong, it's a simple Youtube clip, after all, with Opus audio.

:thanks:

[Atak_Snajpera]

The error message says "Syntax Error" in specific line and column. I'm basically curious what went wrong.

[byteshare]

I can send you a test file but I've only been seeing this issue thus far on x264 10bit as a source but have only tested with x264 8bit and 10bit thus far and not other input codecs.
The issue:
https://imgur.com/a/2tbUF
https://imgur.com/a/2tbUF

LoadPlugin("C:\RipBot264v1.21.0\Tools\AviSynth plugins\hqdn3d\hqdn3d.dll")
LoadPlugin("C:\RipBot264v1.21.0\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
video=hqdn3d(video,2,0,0,0).f3kdb
I get the issue after removing the f3kdb as well.
I don't get the issue while using MDegrain, which is why I think it has something to do with both HQDN3D and F3KDB.

I don't see this issue with MDegrain, but I do if I use MDegrain and F3KDB

I tried updating to the flash3kyuu_deband.dll 2.0 but that was a whole different set of problems and couldn't get the test video to start.

I'm using both r2506MT 64bit and r2508MT 64bit (separate computers).
Both computers are on RipBot 1.21.0, and both Win7

I can confirm that a more recent update has fixed this issue. Side note, might be good to start updating RipBots version number when updates are pushed so that people can report more accurately which version of "1.21.0" they are on.
:thanks:

[guest]

Side note, might be good to start updating RipBots version number when updates are pushed so that people can report more accurately which version of "1.21.0" they are on.
:thanks:

That's actually a really good suggestion, it would make it a lot easier.

About the only way to tell what build you're on, is to go into settings and check what build date the core is.

[Shrekage]

I have a question about updater.exe. is it OK to urn it sandalone (just by double-click?) I run just the encodingserver on a number of machines and never run RipBot264.exe on those... will it just update EncodingServer or will it try to update everything?

[guest]

Just upload \Chunks\getinfo.avs to mediafire

Done

https://www.mediafire.com/file/hmp31c77pa4sh57/getinfo.avs

However, I installed the very latest update, and it worked fine....
so whatever was causing the problem, you've fixed it, already :)

Legend :)

:thanks:

[byteshare]

I have a question about updater.exe. is it OK to urn it sandalone (just by double-click?) I run just the encodingserver on a number of machines and never run RipBot264.exe on those... will it just update EncodingServer or will it try to update everything?
As long as you stop the encoding servers on that machine first it is fine, but once done you'll have to run it again for it to install.
I'd just recommend opening the full ripbot at that point though.

[byteshare]

Since the most recent update when I'm adding a job I noticed the format changed on the color spaces and when I'm using MDegrain2 I'm getting the error:
MSuper: Clip must be YUV or YUY2
(C:\Temp\RipBot264temp\Job1\job1_preview.avs, line 34)
Line 34: super=MSuper(video,pel=2)
Remove MDegrain2 and it works, or if I change:
...mkv.ffindex",colorspace="YV12").ConvertToRGB.Crop(1,0,-1,0)
to ...mkv.ffindex").ConvertToRGB.Crop(1,0,-1,0).ConvertToYV12(matrix="rec709")
it doesn't give me that error in the preview.

but either way I'm getting this error with most new jobs:
Exception EFOpenError in module EncodingClient.exe at 000241AE.
Cannot open file "C:\Temp\RipBot264temp\job1\info.txt". The system cannot find the file specified.
I checked and I don't see that info.txt file in the job1 folder.

Update: I've only tried with 2 different video types. 1 of the videos having issues with the msuper I'd have previously encoded with the same settings.
The only video type I'm not currently having issues with is x264 10bit, and only 8bit ones seem to be an issue right now. I can send test clips if needed, but the 10bit one I've already sent you.

Update, Update: It might only be with a specific batch of files. Not sure what is special about them but I'll post media info:
General
Unique ID : 311471574382395606355532156062846117123 (0xEA533E41E2F5EB9631690B3FDC6F6503)
Complete name : C:\Test.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 209 MiB
Duration : 7 min 4 s
Overall bit rate mode : Variable
Overall bit rate : 4 135 kb/s
Encoded date : UTC 2017-07-26T19:04:09Z
Writing application : HandBrake 1.0.7 2017040900
Writing library : Lavf57.7.2

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4
Format settings, CABAC : Yes
Format settings, RefFrames : 2 frames
Format settings, GOP : M=3, N=30
Codec ID : V_MPEG4/ISO/AVC
Duration : 7 min 4 s
Bit rate mode : Variable
Maximum bit rate : 6 000 kb/s
Width : 1 366 pixels
Height : 1 024 pixels
Display aspect ratio : 4:3
Original display aspect rat : 4:3
Frame rate mode : Constant
Frame rate : 30.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Default : Yes
Forced : No
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio
ID : 2
Format : Opus
Codec ID : A_OPUS
Duration : 7 min 4 s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 kHz
Compression mode : Lossy
Delay relative to video : -7 ms
Title : Stereo
Language : English
Default : Yes
Forced : No

[Shrekage]

As long as you stop the encoding servers on that machine first it is fine, but once done you'll have to run it again for it to install.
I'd just recommend opening the full ripbot at that point though.

My thinking was, at boot, run updater.exe, wait 20 seconds, run encodingserver. this is on dedicated headless "servers" that only runs when awakened by the client, then shuts down until the next time it's needed...

[george84]

Yes .

I tried and there is a source of problems. When I create a job with version 1.21 then it will also show in job queue of 1.20.
So you have a source of error and must be very careful not to start a given job in the wrong version.

Thats because there exists one single working directory for all version.

Maybe in a future version this could be adapted.

[slalom]

Use different Temp folders

[george84]

Use different Temp folders

In settings I find only drive letter. No folder.

[soneca]

In settings I find only drive letter. No folder.

Exactly, unfortunately we can not create two temporary folders on the same partition, the folder is created automatically when we define a partition.
RipBot264 defines the location for temporary files by partition, not by folders.:(

[Atak_Snajpera]

You can always use TEMP option (system temp folder. Usually in x:\Users\[user_name]\AppData\Local\Temp)

[soneca]

But to speed up the process(demux) I use disk E as temporary and destination and D as source.
And C is an SSD that prevents overwriting, including the path of the temp folder has been changed to disk D.
Changing the temp folder to disk D, my only alternative, would not speed up the process.

[george84]

You can always use TEMP option (system temp folder. Usually in x:\Users\[user_name]\AppData\Local\Temp)

I assume you mean we should edit RipBot264.ini:
[settings]
// TEMP=uses System temp ; C , D ... uses specific partition
StoreTempFilesin=C

for
[settings]
TEMP=uses System temp ; C , D ... uses specific partition
//StoreTempFilesin=C

[byteshare]

Since the most recent update when I'm adding a job I noticed the format changed on the color spaces and when I'm using MDegrain2 I'm getting the error:

Line 34:
Remove MDegrain2 and it works, or if I change:
...mkv.ffindex",colorspace="YV12").ConvertToRGB.Crop(1,0,-1,0)
to ...mkv.ffindex").ConvertToRGB.Crop(1,0,-1,0).ConvertToYV12(matrix="rec709")
it doesn't give me that error in the preview.

but either way I'm getting this error with most new jobs:
Exception EFOpenError in module EncodingClient.exe at 000241AE.
Cannot open file "C:\Temp\RipBot264temp\Job1\info.txt". The system cannot find the file specified.

I checked and I don't see that info.txt file in the job1 folder.

Update: I've only tried with 2 different video types. 1 of the videos having issues with the msuper I'd have previously encoded with the same settings.
The only video type I'm not currently having issues with is x264 10bit, and only 8bit ones seem to be an issue right now. I can send test clips if needed, but the 10bit one I've already sent you.

Update, Update: It might only be with a specific batch of files. Not sure what is special about them but I'll post media info:
General
Unique ID : 311471574382395606355532156062846117123 (0xEA533E41E2F5EB9631690B3FDC6F6503)
Complete name : C:\Test.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 209 MiB
Duration : 7 min 4 s
Overall bit rate mode : Variable
Overall bit rate : 4 135 kb/s
Encoded date : UTC 2017-07-26T19:04:09Z
Writing application : HandBrake 1.0.7 2017040900
Writing library : Lavf57.7.2

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4
Format settings, CABAC : Yes
Format settings, RefFrames : 2 frames
Format settings, GOP : M=3, N=30
Codec ID : V_MPEG4/ISO/AVC
Duration : 7 min 4 s
Bit rate mode : Variable
Maximum bit rate : 6 000 kb/s
Width : 1 366 pixels
Height : 1 024 pixels
Display aspect ratio : 4:3
Original display aspect rat : 4:3
Frame rate mode : Constant
Frame rate : 30.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Default : Yes
Forced : No
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio
ID : 2
Format : Opus
Codec ID : A_OPUS
Duration : 7 min 4 s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 kHz
Compression mode : Lossy
Delay relative to video : -7 ms
Title : Stereo
Language : English
Default : Yes
Forced : No

Has to do with something specific RipBot builds.
I ran the same problem videos on a different RipBot computer and I do not get the msuper error, the difference was 1 computer is on core build 2017.09.21 (works) and the other is on 2017.09.27 (does not work).
I happened to close and open and got updated to 2017.09.25 and that version also had the msuper issue.
I backed up my build on the working computer, updated to 2017.09.27 and I'm getting the same error.
Will PM sample.
Update: Sent PM with link to a file for testing
Update Update: Either you're really fast or I missed an update, but I'm now on 2017.09.28 and it is working again :D

[byteshare]

I think I got too excited. I'm not having issues while in the Preview but when I try to actually start an encode I'm getting:
Exception EFOpenError in module EncodingClient.exe at 000241AE.
Cannot open file "C:\Temp\RipBot264temp\Job1\info.txt". The system cannot find the file specified.
The part I don't understand is some jobs don't do this and other do. Suggestion?

[Atak_Snajpera]

Update: nevermind. Thanks to your sample I see what is wrong.

[byteshare]

Update: nevermind. Thanks to your sample I see what is wrong.
Awesome, glad it helpped.
I changed my LastCheck= to a few days ago to make sure it would try to update.
Reran the tests and the preview and the actual encoding process is working now. Not getting the info.txt issue.
Didn't have to even re-add the jobs or anything :D
:thanks:

[POTI]

I downloaded 1.21.0 again and overwrote my install and it is now working.

[Arbelisk]

Just wondering if Ripbot supports UHD Blu-Ray structures? I'm assuming no, because I tried one and it did not show any playlist or anything. If not, will it in the future? Thanks.

[george84]

My AVISYNTH+ generates a 16bit clip YUV444P. I can add it as job to RipBot264 (newest 64bit version), and it will also encode.
However the resulting clip is complete garbage. (OK, audio is correct)

It would be nice to have an error message when adding job. It would be even nicer if RipBot would support it.

[soneca]

Error with Vegas + FrameServer + UHD.

https://s20.postimg.org/v934eik3x/image.png

https://s20.postimg.org/p9fdauzbh/image.png

[BabyPuncher]

I'm also having Avisynth issues with 1.21, preventing me from using both RipBot and the encoding server.

When I try to prepare a job in RipBot, it fails to a blank "Decode Error" screen. When I try to push a job to the encoding server, it fails immediately on start, saying it couldn't load avisynth.dll.

I've tried nuking my Avisynth installation and letting RipBot install it fresh but it hasn't helped. I've also tried manually reinstalling AviSynth to no avail.

Encoding Server reports that I have Avisynth+ 0.1 (r2508, MT, x86-64).

Here's an example error message from Encoding Server.

Encoding started...
""\\{source machine}\Ripbot264temp\tools\avs2yuv\avs2yuv.exe" -seek 169 "\\{source machine}\RipBot264temp\job1\Chunks\36.avs" -o - | "\\{source machine}\Ripbot264temp\tools\x265\x265_x64.exe" --crf 19 --fps 24000/1001 --min-keyint 24 --keyint 240 --frames 1411 --sar 1:1 --rd 4 --psy-rd 1.5 --psy-rdoq 2.5 --aq-strength 1.5 --y4m --output "\\{source machine}\RipBot264temp\job1\Chunks\36.265" -"
error: failed to load avisynth.dll
x265 [error]: unable to open input file <->

Encoding terminated.


Connection Closed Gracefully.

[Atak_Snajpera]

@BabyPuncher
https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
If I remember correctly you need version 2015 x64

Here is my compilation containing all version since 2010.
http://www.mediafire.com/file/v8cwedgd1y7ys0g/vc_redist.7z

@Soneca
I do not speak portuguese.

[soneca]

@BabyPuncher
https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
If I remember correctly you need version 2015 x64

Here is my compilation containing all version since 2010.
http://www.mediafire.com/file/v8cwedgd1y7ys0g/vc_redist.7z

@Soneca
I do not speak portuguese.

https://s20.postimg.org/p9fdauzbh/image.png

Message says that an invalid media type was specified.

How do I set a color space in version 1.21.0?

[BabyPuncher]

@BabyPuncher
https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
If I remember correctly you need version 2015 x64

Here is my compilation containing all version since 2010.
http://www.mediafire.com/file/v8cwedgd1y7ys0g/vc_redist.7z

@Soneca
I do not speak portuguese.



Thanks that did the trick

[byteshare]

It might just be me but since the switch to 64bit AVISynth I feel that the AVS2YUV.exe has been crashing more. It also happened in the past but much less so.
https://imgur.com/a/sF2ty
https://imgur.com/a/sF2ty
Problem signature:
Problem Event Name: APPCRASH
Application Name: avs2yuv.exe
Application Version: 0.0.0.0
Application Timestamp: 4e78e879
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.23889
Fault Module Timestamp: 598d5074
Exception Code: c0000026
Exception Offset: 00000000000c8078
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: e2d5
Additional Information 2: e2d5003a216db1cab2c94354ea6fa1f8
Additional Information 3: 16a0
Additional Information 4: 16a02affa9044e7398158527105fddca

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


The other issue I have with this is you chose close first RipBot thinks the segment finished :( You have to stop the server, click close, and then start the server again.

I think this isn't a RipBot issue per say, since it is the AVS2YUV.exe, but it also doesn't seem to be a consistent issue, meaning I could encode the same chunk more than once and it won't always happen, and I don't believe I've seen it happen where AVS2YUV.exe crashes and I stop the server, close the error, and start the server again and then AVS2YUV.exe crashes again, so maybe it is a memory issue?