RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY [Archive] - Page 142

Atak_Snajpera

7th March 2010, 12:44

show me mkvinfo.txt

HammerJoe

7th March 2010, 14:20

what do you have against JAVA?
Nothing, I just dont want it installed on my machines.
Could you tell me which version of RipBot works without Java installed?

Woqini

7th March 2010, 14:50

What??
http://img132.imageshack.us/img132/2126/new1h.png

Oops, didn't see that one. I used the other custom ...

Ok, then i need support for subtitles ripping. Right now i use Vsrip to create idx and sub and then load them into Ripbot, but it would be nice to have that function "built in".

It works with Bluray, but not DVD - or am i missing something .... again ... :)

ziemlichdunkel

7th March 2010, 16:04

Discoboy

7th March 2010, 16:15

Can we now use the new Matroska Splitter released on 19/12/2009? A few weeks ago Atak said to use the older version (Atak´s post on the first page, but the warning is missing now).

Hi Atak,

Please can advise on this question above? :thanks:

twazerty

7th March 2010, 16:49

RipBot keeps messing with my ffdshow settings. I have my own decoders selected and I don't want to use the settings RipBot uses. Can you make an option to disable auto configuration of ffdshow?

Edit: v1.15.0

Blackwalker

7th March 2010, 16:51

Ripbot264 with default level 4.0 profile + latest 264.exe

what do you have against JAVA?

Frankly it does not matter which version you use... Both use the same sources.

ok, i'm using the CLSID version now but i can't play m2ts files
with VC-1 with wmp or wmp classic!?!?

maybe i have to set in the ffdshow filter to use "libavcodec" insted of "wmv9"?

thx for your answer atak

3408

7th March 2010, 16:54

Atak,
I have searched and searched this forum - I am running v1.15.0 for quite some time and would like to know where this (check box) for 5.1 downmix is located?

Thanks in advance

Atak_Snajpera

7th March 2010, 16:56

@ziemlichdunkel
delete tools/mkvtoolnix folder

extract this file
http://www.mediafire.com/file/devyzzlcddh/mkvtoolnix.7z
to /tools folder

@3408
http://img191.imageshack.us/img191/6216/new1g.png

Please can advise on this question above?
yes if you want to have the same problems as Blackwalker has

I have my own decoders selected and I don't want to use the settings RipBot uses.
what decoders?

twazerty

7th March 2010, 17:27

what decoders?

I use libavcodec for H264, VC and MPEG2 but RipBot sets them to the following settings each time I run RipBot:
H264: ffmpeg-mt
VC1: wmv9
MPEG2: libavcodec.

3408

7th March 2010, 17:37

@ziemlichdunkel
delete tools/mkvtoolnix folder

extract this file
http://www.mediafire.com/file/devyzzlcddh/mkvtoolnix.7z
to /tools folder

@3408
http://img191.imageshack.us/img191/6216/new1g.png

yes if you want to have the same problems as Blackwalker has

what decoders?

Thanks Again Atak - Would you recommend running Ripbot on Vista 64 or Win 7 64 and would i benefit at all from my current OS XP 32 BIT?

fyi - I am a quad core 6600 - clocked to 3.0ghz and i usually see around high 20's FPS 1st pass and 10'S Second pass

ziemlichdunkel

7th March 2010, 17:58

@ziemlichdunkel
delete tools/mkvtoolnix folder

extract this file
http://www.mediafire.com/file/devyzzlcddh/mkvtoolnix.7z
to /tools folder

Just tried it but still no audio selectable :confused:

Atak_Snajpera

7th March 2010, 17:59

you will have to send me 50mb sample to www.mediafire.com. use dgsplit 1.1

@twazerty
h264: ffmpeg-mt is multithreaded. libavcodec is not!
vc-1: wmv9 supports interlaced vc-1 . libavcodec supports only progressive vc-1!

Macota

7th March 2010, 18:48

Is it on your map to allow untouched encoded hd audio in a future version?

twazerty

7th March 2010, 19:09

you will have to send me 50mb sample to www.mediafire.com. use dgsplit 1.1

@twazerty
h264: ffmpeg-mt is multithreaded. libavcodec is not!
vc-1: wmv9 supports interlaced vc-1 . libavcodec supports only progressive vc-1!

Thanx, going to change that in AVCHDCoder :)

Blackwalker

7th March 2010, 20:04

@ziemlichdunkel
delete tools/mkvtoolnix folder

extract this file
http://www.mediafire.com/file/devyzzlcddh/mkvtoolnix.7z
to /tools folder

@3408
http://img191.imageshack.us/img191/6216/new1g.png

yes if you want to have the same problems as Blackwalker has

what decoders?

what you mean with this:
yes if you want to have the same problems as Blackwalker has
???

this is what i ask before:
i can't play m2ts files
with VC-1 with wmp or wmp classic!?!?

maybe i have to set in the ffdshow filter to use "libavcodec" insted of "wmv9"?

can somone give me a hand?
I recently reinstalled all the OS, windows 7 64bit.
Before i was able to play file "m2ts" with VC-1, so i dont know
what to think about! :confused:

i'll set for VC-1: wmv9 but still cannot play the movie!
damn...

stasi

7th March 2010, 21:08

unfortunately it's in german, hope it helps anyway (don't know how to change that)

That is exactly the same error i got a few weeks ago. I resolved it by deleting the "locale" folder. Do you have installed mkvtoolnix? Please deinstall, and delete the registry entry of mkvtoolnix (search for it).

ARE YOU REALLY SURE THERE IS NO GERMAN UMLAUT IN THE FOLDER OR FILENAME YOU WANT TO ADD? JUST TRIED IT WITH "Tränen der Sonne" -> NO AUDIO, RENAMED IT TO "Traenen der Sonne" -> AUDIO WORKS

stasi

7th March 2010, 21:23

what you mean with this:

???

this is what i ask before:

can somone give me a hand?
I recently reinstalled all the OS, windows 7 64bit.
Before i was able to play file "m2ts" with VC-1, so i dont know
what to think about! :confused:

i'll set for VC-1: wmv9 but still cannot play the movie!
damn...

Install Media Player Classic HOME CINEMA, goto Options->Internal Filters->Transform Filters, activate "VC1 (FFmpeg)" and open your m2ts file. This worked for me.

gohamstergo

8th March 2010, 01:05

Is it on your map to allow untouched encoded hd audio in a future version?

nope, atak has stated before he thinks HD audio is pointless

Macota

8th March 2010, 02:43

nope, atak has stated before he thinks HD audio is pointless

Hrm, ok. Wonder why he thinks that, I would like to know so I could understand his side of it.

Thanks for the reply! :)

Mr. Monte

8th March 2010, 05:09

Just tried Ripbot last night for the first time.

I have a question. I am encoding a DVD-VIDEO (MPEG 2) to MKV. I pointed Ripbot to the Video_TS. RIpbot indexed the files and came up with the proper info streams. I went through and auto-cropped, selected copy audio.

However, I did not see the available subtitles to select to put in my MKV container. Where is the option for DVD video? I think I've seen it when encoding Blu-Rays...but did not see it for DVD-VIDEO

TIA :thanks:

Balthazar2k4

8th March 2010, 05:34

Hrm, ok. Wonder why he thinks that, I would like to know so I could understand his side of it.

Thanks for the reply! :)

This has been discussed numerous times before. Atak is allowing the lossless conversion of HD audio (TrueHD, DTS-HD Master, PCM) to FLAC. FLAC is a more efficient compression container and in most instances saves space. Any PC can playback multichannel FLAC without breaking a sweat and the XBOX and PS3 can stream FLAC via most UPNP servers (I would recommend PS3 Media Server).

3408

8th March 2010, 06:15

@ziemlichdunkel
delete tools/mkvtoolnix folder

extract this file
http://www.mediafire.com/file/devyzzlcddh/mkvtoolnix.7z
to /tools folder

@3408
http://img191.imageshack.us/img191/6216/new1g.png

yes if you want to have the same problems as Blackwalker has

what decoders?

Atak,
I downloaded and replaced the mkvtoolnix in tools and still do not get the checkbox..... What am i doing wrong?:)

http://thumbnails12.imagebam.com/7109/aa478d71081604.gif (http://www.imagebam.com/image/aa478d71081604)

Balthazar2k4

8th March 2010, 09:56

Atak,
I downloaded and replaced the mkvtoolnix in tools and still do not get the checkbox..... What am i doing wrong?:)

http://thumbnails12.imagebam.com/7109/aa478d71081604.gif (http://www.imagebam.com/image/aa478d71081604)

Maybe you have already answered this, but do you have the Arcsoft decoder installed? I see you are trying to convert DTS-HD MA to FLAC, without the decoder installed it will be impossible.

Edit: Probably should have read back a page to see what precisely was the problem. I see you are trying to do a 5.1 downmix, but the content you are converting is already 5.1. I don't think RipBot shows the 5.1 downmix option unless the content has more than 6 channels.

Woqini

8th March 2010, 10:17

Just tried Ripbot last night for the first time.

I have a question. I am encoding a DVD-VIDEO (MPEG 2) to MKV. I pointed Ripbot to the Video_TS. RIpbot indexed the files and came up with the proper info streams. I went through and auto-cropped, selected copy audio.

However, I did not see the available subtitles to select to put in my MKV container. Where is the option for DVD video? I think I've seen it when encoding Blu-Rays...but did not see it for DVD-VIDEO

TIA :thanks:

I miss that option for DVD too. It works for Bluray.

Blackwalker

8th March 2010, 11:38

Install Media Player Classic HOME CINEMA, goto Options->Internal Filters->Transform Filters, activate "VC1 (FFmpeg)" and open your m2ts file. This worked for me.

thx now it work! :)

i have another question.
Everytime i start decoding using RipBot i get this warnign windows:
http://utenti.multimania.it/BlackWalker/ripbot1.jpg

but the output looks ok.
Is it normal or i have something wrong in my settings??
thx!

3408

8th March 2010, 15:39

Maybe you have already answered this, but do you have the Arcsoft decoder installed? I see you are trying to convert DTS-HD MA to FLAC, without the decoder installed it will be impossible.

Edit: Probably should have read back a page to see what precisely was the problem. I see you are trying to do a 5.1 downmix, but the content you are converting is already 5.1. I don't think RipBot shows the 5.1 downmix option unless the content has more than 6 channels.

Ohh I have read, I am not trying to convert flac.....

Didn't know DTS MA could come in 5.1.... I thought DTS MA was all 7.1?

Atak do I need the Arcsoft?

Or is my FFdshow need to be set to 7.1 or?

pacaveli211

8th March 2010, 21:34

DTS-HD MA just means uncompressed / lossless. I've seen it in 5.1/6.1/7.1

if you're going to downmix to DTS 1.5 just use tsmuxer (downconvert HD audio), or if you want to keep the original track just demux / mux it back in after encoding

3408

9th March 2010, 03:12

DTS-HD MA just means uncompressed / lossless. I've seen it in 5.1/6.1/7.1

if you're going to downmix to DTS 1.5 just use tsmuxer (downconvert HD audio), or if you want to keep the original track just demux / mux it back in after encoding

Yes i use tsmuxer to downcovert to 5.1 sources then mux it back with Ripbot - I am trying to eliminate a step!

pacaveli211 does your 5.1 downmix checkbox show up on your ripbot? and have you used it?

Mr. Monte

9th March 2010, 05:06

ANy idea on the SD DVD-VIDEO subtitle option?

HDConvertX and Staxrip both have it...was wondering if Ripbot could?

Also, how does NOT having subtitles in your MKV affect forced subtitles in a movie?

Balthazar2k4

9th March 2010, 05:21

Yes i use tsmuxer to downcovert to 5.1 sources then mux it back with Ripbot - I am trying to eliminate a step!

pacaveli211 does your 5.1 downmix checkbox show up on your ripbot? and have you used it?

The downmix option is only available on sources with greater than 6 channels. You will not see the option otherwise. I have used it many times without issue.

pacaveli211

9th March 2010, 06:14

Yes i use tsmuxer to downcovert to 5.1 sources then mux it back with Ripbot - I am trying to eliminate a step!

pacaveli211 does your 5.1 downmix checkbox show up on your ripbot? and have you used it?

I change/modify audio tracks as little as possible. And as far as I know ripbot won't output any DTS (other than copying). so I never do any audio processing with ripbot. if I have HD audio I just use tsmuxer or eac3to to extract the core. I was talkin about downconvert, which is not the same thing as downmix. but you also end up with a 5.1 track after doing the downconvert.

Blackwalker

9th March 2010, 11:20

thx now it work! :)

i have another question.
Everytime i start decoding using RipBot i get this warnign windows:
http://utenti.multimania.it/BlackWalker/ripbot1.jpg

but the output looks ok.
Is it normal or i have something wrong in my settings??
thx!

someone can tell me if its ok that i have this box?
thx :)

buzzqw

9th March 2010, 12:07

yes, it's normal and you have to check also "Don't Ask again"
BUT make sure you have selected "Use FFDSHOW Always"

since you are using a direct show decoder ffdshow is asking if it's allowed to be used..

BHH

Blackwalker

9th March 2010, 14:50

yes, it's normal and you have to check also "Don't Ask again"
BUT make sure you have selected "Use FFDSHOW Always"

since you are using a direct show decoder ffdshow is asking if it's allowed to be used..

BHH

thx a lot for you help,
grazie :)

soneca

10th March 2010, 02:22

:thanks: for the new version!

nekrosoft13

10th March 2010, 05:49

Atak_Snajpera

if you don't mind, why the move back to older version of Haali? is it possible to ignore it like few versions back?

Atak_Snajpera

10th March 2010, 08:09

Newer version does not support vc-1 in m2ts (?!?!)

nekrosoft13

10th March 2010, 08:46

weird, I re-encoded an m2ts (from blu-ray) with vc-1 and dtsma about 4 days ago with 15.0 just fine. Had the same Haali version installed, the latest from december.

edit, yap, VC-1 in m2ts works fine with 15.0 and latest version of Haali

http://img638.imageshack.us/img638/3062/captures.jpg

Blackwalker

10th March 2010, 11:49

just one question.

When i rencode a bly-ray movie, with CQ 18, the movie from 15gb become 9.5gb (around).
Isnt this too much?!?!

I also see always some artifacts/pixelation if (while playing) i move the movie forward...is this normal or what?
(this happen with CF 18 or with 2-pass bly-ray movie)

Someone can suggest me better settings for bly-ray in "profile/advanced"?
(I dont care about the output size)

hope in your help :)
thx a lot

Mr. Monte

10th March 2010, 14:47

I was seeing pixelation with my profile settings and the newer r1471 x264 when using KMPlayer with CoreAVC 2.0 By change I opened the same file up with Windows Media player using the latest FFDshow 3305 (tryout version) and pixelation is gone.

BTW, I noticed the link in the new 1.15.1 Ripbot for FDShow say minimuim version 3300, however the link goes to a 3299. you can find a 3305 tryout if you look..works fine

P.SS

Atak, would you please add subtitle support for DVD-VIDEO movie rips (non-blueray)?

TIA

Wishbringer

10th March 2010, 15:29

You can get even newer ffdshow versions at http://xvidvideo.ru

Same for MPC HomeCinema.

Only problem was with Symantecs false SONAR reports, because native language of system where compiler is installed is russian.

Blackwalker

10th March 2010, 15:46

just one question.

When i rencode a bly-ray movie, with CQ 18, the movie from 15gb become 9.5gb (around).
Isnt this too much?!?!

I also see always some artifacts/pixelation if (while playing) i move the movie forward...is this normal or what?
(this happen with CF 18 or with 2-pass bly-ray movie)

Someone can suggest me better settings for bly-ray in "profile/advanced"?
(I dont care about the output size)

hope in your help :)
thx a lot

so the problem is the ffdshow version or the x264 conversion?
humm...this "artifacts/pixelation" have to do with the conversion process or only with the codec?

Atak say that there is no difference about the ffdshow version you are using...
Currently i'm using the xxl version, before i used the clsid one.
Now you say to use the tryout...links for the tryout (32 & 64)?
(if remember i have to install both under windows 7 64 bit, correct?

And...

sometimes i see the same artifact (not always) using tversity to stream hd movie to my lcd with PS3.

anyway, which are the best settings for bly-ray under "profile/advanced"?
There are so many options and i'm lost...

i'd like to know if there is a guide/help about are all these settings (where you select bly-ray 4.0 profile) - "profile/advanced"!!! there is?

sorry to make so many questions and aksing so many info!!!
and thx again for you help and patience! :)

pacaveli211

10th March 2010, 17:10

weird, I re-encoded an m2ts (from blu-ray) with vc-1 and dtsma about 4 days ago with 15.0 just fine. Had the same Haali version installed, the latest from december.

edit, yap, VC-1 in m2ts works fine with 15.0 and latest version of Haali

I previously explained what doesn't work with the new haali: http://forum.doom9.org/showthread.php?p=1369193

just one question.

When i rencode a bly-ray movie, with CQ 18, the movie from 15gb become 9.5gb (around).
Isnt this too much?!?!

I also see always some artifacts/pixelation if (while playing) i move the movie forward...is this normal or what?
(this happen with CF 18 or with 2-pass bly-ray movie)

Someone can suggest me better settings for bly-ray in "profile/advanced"?
(I dont care about the output size)

hope in your help :)
thx a lot
if you don't care about size stop compressing / re-encoding your movies. I guarantee you won't get any pixelations then.

ajua

10th March 2010, 19:15

I built an HTPC for my living room and I will use use it as a rip box while not in use.
I'm getting the ffdshow and Haali warning when starting RipBot 1.15.1.

In the HTPC I have latest version of win7codecs installed which comes with the latest tryout of ffdshow and the most recent version of Haali. I've read here that one must revert to an older version of Haali for VC-1 to work. Is there a way to skip those checks like many versions ago?

I don't need VC-1 support right now and I know for sure that I have the most recent build of ffdshow tryouts. I can use the new version 1.15.1 with these checks.

Thanks.

Blackwalker

10th March 2010, 19:29

if you don't care about size stop compressing / re-encoding your movies. I guarantee you won't get any pixelations then.
Yea i know :D

Ok the size dont care, but some movie are really toooooo big!
Around 12/15GB, each one, its ok for my htpc with a buffalo nas.
So i have all my movie ready to play :) but i cant buy 200 buffalo nas :D too much expensive!

I'd like to compress my movie, not too much, but with a good quality.

thats why i'm asking about the problem!

nekrosoft13

10th March 2010, 19:30

I previously explained what doesn't work with the new haali: http://forum.doom9.org/showthread.php?p=1369193

.

so only playback issue, works fine with powerdvd.

I don't need VC-1 support right now and I know for sure that I have the most recent build of ffdshow tryouts. I can use the new version 1.15.1 with these checks.

Thanks.

that is the problem, you can't use ripbot 1.15.1 unless you change your haali version, since ripbot itself works fine with new haali, i wish there would be simple way to ignore that check

ajua

10th March 2010, 19:40

that is the problem, you can't use ripbot 1.15.1 unless you change your haali version, since ripbot itself works fine with new haali, i wish there would be simple way to ignore that checkI see that. I will revert the Haali version to the one suggested by RipBot.

However, I still have the ffdshow warning.
The version I have is 3309 but somehow RipBot keeps telling that I need at least 3300.

Any advice? thanks.

nekrosoft13

10th March 2010, 19:45

I see that. I will revert the Haali version to the one suggested by RipBot.

However, I still have the ffdshow warning.
The version I have is 3309 but somehow RipBot keeps telling that I need at least 3300.

Any advice? thanks.

shark sometimes forgets to update the registry information for ffdshow, you have to go into registry and change the version number yourself.

for 64bit ffshow go to

LOCAL_Machine\Software\GNU\ffdshow64 and look for revision, change the decimal value to 3309

for 32bit ffdshow go to

LOCAL_Machine\Software\Wow6432Node\GNU\ffdshow and again look for revision, and change it to 3309

ajua

11th March 2010, 00:02

shark sometimes forgets to update the registry information for ffdshow, you have to go into registry and change the version number yourself.

for 64bit ffshow go to

LOCAL_Machine\Software\GNU\ffdshow64 and look for revision, change the decimal value to 3309

for 32bit ffdshow go to

LOCAL_Machine\Software\Wow6432Node\GNU\ffdshow and again look for revision, and change it to 3309
It didn't occur to me. Thanks for the tip.

I will notice shark so he can update those revision entries for applications that read them like RipBot264.