RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Jake802]

It happens randomly thats why I wasn't sure. Thanks for the answer!

[Jake802]

Here is another one I see frequently.....
14012

[treyking11]

now you know why i haven't enabled .ts in de mode.

how about m2ts or avchd? i am using tsmuxer and would love to keep it. thanks in advance!

[aldix]

Well, the thing remuxes blurays so m2ts should work. But wouldn't transcoding it from ts to m2ts be bad for the quality or something?

[tommytinkroom]

How come batch doesn't support m2ts files decrypted from blu-ray rip?:confused:

[tommytinkroom]

Ok,so i sussed out renaming m2ts files to mts loads them
into the job queue,:)

[rsotome]

Is there any hope of a future fix for the problems that RipBot264 has been having, in being able to report x264 [info] in the generated log file (eg. Avg QP, Final Ratefactor, etc), in x264 builds beyond r2345?

r2389 was released a little over a week ago & would be kinda nice to be able to use it.

Again, thank you for this wonderful program, it's been very handy to have these past years. :)

[aldix]

Scroll some up and you'll see that Atak told someplace that he won't ever go beyond 2345, some compatibility issues or somesuch.

Nonetheless, you can always swap the relevant x264 files in the intended folder. It'll just be one of these (admittedly many) things you wouldn't get any support for in case something goes sideways.

[treyking11]

Again, thank you for this wonderful program, it's been very handy to have these past years. :)[/QUOTE]

yes, it is by far my favorite in all my years of encoding and i am very thankful for it!
that being said, i would like some clarification. ripbot has no problems with .ts files, just distributed encoding? i really want to find a way to utilize both xeon processors (e5607) in this machine. ripbot only pegs them at 50%, and it is actually slower than my single processor machine with an i5 2500k. twin processors should chew through these files like nobody's business!! is there any way i can use tsmuxer to create a file that ripbot can use in distributed encoding? thanks in advance!!

[slalom]

You can convert ts file to mkv with mkvmerge

[aldix]

You can convert ts file to mkv with mkvmerge


See both mine & Atak's replies on the issue.

[Slitheen]

Thanks for the latest update Atak.

[Metaphor]

Ive been using RipBot now for several years. My entire library has been built on its use. If you are interested and its possible to do so, I'd love to ship you an 8-core intel Xeon and workstation board that I am no longer using, if you are interested. I'd love to support your valuable contributions to the encoding community, if you are interested. I'm in the states, fwiw - PM me if you could use an upgrade =D.

[slalom]

^^^That's pretty cool!!

[aldix]

If he won't take it, I sure as hell would ;)

[ProVision]

Hi.

When I encode in RipBot264 it only encodes one chapter. For example, I have an anime episode. It only encodes the first chapter. How can I encode the full episode?

Thanks!!

[Atak_Snajpera]

Ive been using RipBot now for several years. My entire library has been built on its use. If you are interested and its possible to do so, I'd love to ship you an 8-core intel Xeon and workstation board that I am no longer using, if you are interested. I'd love to support your valuable contributions to the encoding community, if you are interested. I'm in the states, fwiw - PM me if you could use an upgrade =D.

I'm happy to announce that Metaphor's package has arrived to me today.

CPU : Xeon E5-2690 @ 2.9 Ghz ( 8C / 16T )
Memory: 64 GB DDR-3 1600
Mainboard: Asus P9X79 PRO
HeatSink: NOCTUA NH-C12P SE14

http://i.cubeupload.com/sPuJBN.png

My old Q6600@3Ghz with 4GB can retire now ;)

I can't wait to see results in x264 FHD Benchmark :)

[soneca]

Cool, the complete package!!! :cool:;)

[aldix]

Whoa, lucky man. Congrats.

[Ronski]

Wow, that's a great system you've got there, and very generous. I've done some coding recently for the community, and when you get rewarded for all the hard work you put in its a great feeling. Enjoy :-)

[soneca]

I'm happy to announce that Metaphor's package has arrived to me today.

CPU : Xeon E5-2690 @ 2.9 Ghz ( 8C / 16T )
Memory: 64 GB DDR-3 1600
Mainboard: Asus P9X79 PRO
HeatSink: NOCTUA NH-C12P SE14

http://i.cubeupload.com/sPuJBN.png

My old Q6600@3Ghz with 4GB can retire now ;)

I can't wait to see results in x264 FHD Benchmark :)

This Xeon is really fast or not?:D

Intel Core i7 X 980 @ 3.34GHz ( 6C / 12T )
encoded 2500 frames, 25.09 fps, 22397.57 kb/s

Intel Core i7-4770K @ 3.5GHz ( 4C / 8T )
encoded 2500 frames, 24.30 fps, 22399.00 kb/s

[Atak_Snajpera]

Ultra fast ;) 3x faster than my old Q6600@3Ghz :) In Linx I get even 4x more GFLOPS (135 GFLOPS).
http://i.cubeupload.com/9IRT21.png

[soneca]

That's right, I expect this performance according to the tests I've seen. ;)
This cooler does a good job, and Poland also helps a lot with low temps.

[Atak_Snajpera]

that heatsink is so big that i can't close my case. in near future i will have to find something wider.

[soneca]

My two pc are mounted on Cooler Master Haf 932 advanced. Really like this case, lots of space, perfect ventilation and little noise.

[george84]

Exception EFOpenError in Module RipBot264.exe at 000235DA.
Cannot open file ".....\job1\test.log".

There are at lest 2 older forum entries where people had the same problems, but the remedy was not clear.

I tried to deinstall RipBOT264 (Which is just a delete of a directory) and a reinstall. But this didn't help.

The following 4 files get created

getAVSerror.cmd
getinfo.avs
info.txt
job1.avs

The file getAVSerror.cmd has as contents:

C:
cd "C:\Temp\RipBot264temp\job1"
"C:\Dokumente und Einstellungen\Kevin\Eigene Dateien\Downloads\RipBot264_1.17.5\Tools\avs2yuv\test.exe" "C:\Temp\RipBot264temp\job1\getinfo.avs"

I am really lost because version 17.4 worked really well. Even after installing 17.5 yesterday i was able to encode some files, but today it doesn't work any more.

[Atak_Snajpera]

(removed)

[LoRd_MuldeR]

Just a side note: Instead of using two separate commands...
C:
cd "C:\Temp\RipBot264temp\job1"

...you can simply do:
cd /d "C:\Temp\RipBot264temp\job1"

Or alternatively:
pushd "C:\Temp\RipBot264temp\job1"

The latter one has the advantage that you can go back via "popd" ;)

[george84]

The file getAVSerror.cmd is generated by RipBot264.
So above comment is rather directed to developer of RipBot264.

[Atak_Snajpera]

have you tried reinstaling avisynth, haali and ffdshow ?

[george84]

have you tried reinstaling avisynth, haali and ffdshow ?

Thank you for your answer

Yes I reinstalled all three. I even switched back to avisynth 2.5.8. I now tried out with simplest avs file having only 1 line, namely "Version()" and get error message quite fast. So error is not related to avs contents.

Some additional info for case where a "real" avs is used:

Ripbot264 processes to the point where it creates subtitles (a ssa file which is created by my avs script too). This means that Ripbot processes entire avs file. It also creates a .d2a file for mp3 which is included in avs script. So something goes wrong after all this processing.

VirtualDub plays the avs file without problems. I tried with StaxRip, MeGui and avanti and they all encoded without problems. But RipBot is really my favorite, and I would like to continue to use it.

Would it be possible to know which tool causes the specific error message? Wich tool wants to write (or read?) this file test.log? I noticed that in directory avs2yuv such a file exists, but it is created when RipBot264 is installed.:o

[Atak_Snajpera]

1) open cmd.exe as administrator
2) run getAVSerror.cmd from console
3) Has test.log been created in C:\Temp\RipBot264temp\job1 ?

[george84]

1) open cmd.exe as administrator
2) run getAVSerror.cmd from console
3) Has test.log been created in C:\Temp\RipBot264temp\job1 ?

No, console log is (I inserted a PAUSE)


C:\Temp\RipBot264temp\job1>C:

C:\Temp\RipBot264temp\job1>cd "C:\Temp\RipBot264temp\job1"

C:\Temp\RipBot264temp\job1>"C:\Dokumente und Einstellungen\Kevin\Eigene Dateien\Downloads\RipBot264v1.17.5\Tools\avs2yuv\test.exe" "C:\Temp\RipBot264t
emp\job1\getinfo.avs"
Reading 1 / 1

C:\Temp\RipBot264temp\job1>PAUSE
Drücken Sie eine beliebige Taste . . .

and this creates in "...\job1" a file called

info.txt

with contents:

240
24.000000
0
0
0
440
80

was for avs with only version() statement. This seems logical as getinfo.avs contains


Import("C:\Dokumente und Einstellungen\Kevin\Eigene Dateien\SMIL\BSG10\Version.avs").ConvertToYV12()
WriteFile("C:\Temp\RipBot264temp\job1\info.txt","Framecount")
WriteFile("C:\Temp\RipBot264temp\job1\info.txt","Framerate")
WriteFile("C:\Temp\RipBot264temp\job1\info.txt","AudioRate")
WriteFile("C:\Temp\RipBot264temp\job1\info.txt","AudioChannels")
WriteFile("C:\Temp\RipBot264temp\job1\info.txt","AudioLength")
WriteFile("C:\Temp\RipBot264temp\job1\info.txt","Width")
WriteFile("C:\Temp\RipBot264temp\job1\info.txt","Height ")
Trim(0,-1)

[george84]

Finally I got RipBot264 1.17.5 working again. I cannot pinpoint the cause of the problem.

As last resort I moved the whole RipBot264 directory to another disk, and starting RipBot264 from there got it working.

:)

[aldix]

Yup, odd unexplainable stuff that suddenly stops. Sounds familiar alright.

[legend63]

Hi at all i receive this error with an VC-1 (source bd) mkv file
DirectShowSource: could not open file C: \ video \ T2_Video -. Mkv:
Can not play back the video stream. It was found no suitable decompressor.
(C: \ Temp \ RipBot264temp \ job5 \ getinfo.avs, line 2)

Any ideas ?
Thanks

[Atak_Snajpera]

Are you happy Win XP user?

[legend63]

Are you happy Win XP user?
wws 2008 r2 .

[Atak_Snajpera]

configure ffdshow like this
http://i.cubeupload.com/beejpk.png

Perhaps your OS does not have Windows Media Player with vc-1 decoder installed like Windows 7.

[legend63]

configure ffdshow like this
Perhaps your OS does not have Windows Media Player with vc-1 decoder installed like Windows 7.
Thanks.

[whiskey]

Audio
Format : Speex
Codec ID : 11
Duration : 1h 21mn
Channel(s) : 1 channel
Sampling rate : 11.025 KHz
Bit depth : 16 bits
Compression mode : Lossy


Is it possible somehow to make Ripbot recognize audio compressed with Speex codec ? Was just wondering since player recognizes it fine but when I load file in ripbot it tells me there is no audio track

[Atak_Snajpera]

send me sample

[Trizep]

Since I´ve updated my Ripbot it doesn´t work. :(

I´ve a Single PC without LAN-Connection.

Ripbot try to start always the Server Client and get the error
"Source File could not be Indexed". :eek:

I don´t need this Server-Lan-fuction. How can I deaktivate the Sever-Lan function???? :confused:

[Atak_Snajpera]

http://forum.doom9.org/showthread.php?p=1661770#post1661770

[Trizep]

OK
you mean ....
change this in ripbot264.ini:

---------------------
// Supported input formats AVI / FLV / MP4 / MKV / DVD / HD-DVD / Blu-ray
UseDistributedEncoding=0
----------------------------

What is about supported input formats (AVI,FLV,MP4,DVD,HD-DVD,BD) ?

Are this the Input formats only for DistributedEncoding?
Or are they now deaktivated for whole Ripbot?

PS:
After change to 0 it works.
:helpful:

[legend63]

edit :-)

[Ryushin]

Atak, I'm very pleased that you got a new setup from such a generous Metaphor. Your hard work in creating the incredible software that we use is just outstanding. I also am very grateful as all of my Blu-rays have been converted with your incredible software.

If you have a moment, for the first time in a long time, I'm experiencing a problem. I did re-arrange my physical temp drives around. But the drive letter is the same. But now, when I'm trying to add a blu-ray to the queue, it hangs on "Please Wait... Demuxing selected streams... 1%" and never moves from there. Hunger Games: Catching Fire, actually never got past Analyzing Streams...

I've searched through the thread, but I could gain any insight into this problem. Thanks very everything, again. Your work and software is incredibly appreciated.

[Atak_Snajpera]

First thought. Bad rip ? New encryption not removed correctly by AnyDVD ? Are you using win8? I'm guessing now.

[Ryushin]

First thought. Bad rip ? New encryption not removed correctly by AnyDVD ? Are you using win8? I'm guessing now.

I do have AnyDVD installed on this computer, but for the most part, I do not use it to rip anything on it. I've tried three different discs with all of the same results. I even have an old rip sitting on the server that I tried.

Win8, not a chance. I'm not that masochistic.

Do you still have a debug version available? It's not putting anything in the Logs folder yet.

[Atak_Snajpera]

Try ripping your BDs with latest AnyDVD. Also you can manually execute Blu-Ray_ExtractStreams.cmd in /Job1/ folder to see if there is any error message in console.