RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[dv8r]

sorry for my misunderstanding. I thought opencl was only used in graphics cores like an apu or gpu. So I assumed only a cpu's with graphics supported opencl. I have seen requirements for opencl say intel hd3000 or higher etc.

On another note I had this error tonight

Error: Unknown chapter file format in 'C:\Temp\RipBot264temp\job2\chapters.txt'. It does not contain a supported chapter format.

I'm not sure what I did wrong. I was re-encoding a file from AVC to HEVC that I had already encoded.

Thanks for any info on what that means.

[Atak_Snajpera]

I thought opencl was only used in graphics cores like an apu or gpu.
It can also run on CPU but like I said many times before it is not very useful due to speed. Modern GPUs have much higher peak FLOPS than any modern CPUs. For example. R290 can reach 4800 GFLOPS (FP32) while my Xeon 2690 won't go above ~250 GFLOPS (FP32). So in this case GPU is about 19 times faster than this 8C / 16T CPU!


Error: Unknown chapter file format in 'C:\Temp\RipBot264temp\job2\chapters.txt'. It does not contain a supported chapter format.

Post content of that chapters.txt here. Do not use forum's attachment please :)

[guest]

Atak, would there be any possibility of adding a new feature to Ripbot ??

With Ripbot you can easily adjust almost every aspect of a video file, expect (as far as I know) the Volume.

Is there an "easy" way for you to add a volume adjustment feature, in % or db, gain or loss ??

[omegaeel]

Ripbot is refusing to work with DE turned on. It just spits out a popup error stating that it could not open info.txt . I've looked around for a fix but all I could find was an old post saying to open getinfo.avs, from the job folder, in MPC. I did this and it said Cannot Render File, info.txt was not created.

Screencap: https://www.dropbox.com/s/hcdxmlxeczrb13b/screencap2.png?dl=0

[legend]

How could I run Ripbot without admin access. Most of the encoding server have no admin rights.

Can anyone help me about this.

[lemaireus]

Ran into something peculiar today: a Trojan alert from Windows Defender on Windows 10 for Ripbot264.exe.

http://s18.postimg.org/syw2q16gp/Rip_Bot_Trojan_Alert.jpg (http://postimage.org/)

Of course, that is a false positive. I've been using Ripbot for more years than I can remember, but am posting this just so that you know that Windows Defender can throw up a false positive, and that Atak should be aware of the issue in case he doesn't know this yet.

Ripbot264.exe is busy encoding in the background as I type this message. :)

[Wildfire]

Ran into something peculiar today: a Trojan alert from Windows Defender on Windows 10 for Ripbot264.exe.

http://s18.postimg.org/syw2q16gp/Rip_Bot_Trojan_Alert.jpg (http://postimage.org/)

Of course, that is a false positive. I've been using Ripbot for more years than I can remember, but am posting this just so that you know that Windows Defender can throw up a false positive, and that Atak should be aware of the issue in case he doesn't know this yet.

Ripbot264.exe is busy encoding in the background as I type this message. :)

My Windows Defender detects nothing. Which RipBot264 version are you using? I'm on version 1.19.0.

[slalom]

Does anyone have any problem with the covers?
Searching works fine, but I can't see the cover

[lemaireus]

My Windows Defender detects nothing. Which RipBot264 version are you using? I'm on version 1.19.0.

Peculiar: when I check Ripbot264.exe properties the version I get is 1.19.2.0, but the encoding GUI displays 1.19.3.0:

http://s22.postimg.org/teztq51xd/Rip_Bot_Version.jpg (http://postimage.org/)

I had assumed that the new update feature must have updated the Ripbot executable at some point to 1.19.3.0. Can someone please confirm that? If not then I might probably be running a bugged .exe!

[Edit] PS: Well, searching around the forum a little bit confirms that my version numbers are fine so it's not a bugged executable after all ;) So the Windows Defender issue should crop up with other people using Windows 10 (Enterprise Edition). Atak, I vaguely recall you being with Windows 10 as well, so perhaps you might report something on this?

[Atak_Snajpera]

Does anyone have any problem with the covers?
Searching works fine, but I can't see the cover

Covers work but sometimes you have to re-send query.
http://i.cubeupload.com/vaRifF.png

Atak, I vaguely recall you being with Windows 10 as well, so perhaps you might report something on this?
I'm staying on Win7. Do not worry about that version discrepancy. I just forgot to change it.

[omegaeel]

Ripbot is refusing to work with DE turned on. It just spits out a popup error stating that it could not open info.txt . I've looked around for a fix but all I could find was an old post saying to open getinfo.avs, from the job folder, in MPC. I did this and it said Cannot Render File, info.txt was not created.

Screencap: https://www.dropbox.com/s/hcdxmlxeczrb13b/screencap2.png?dl=0

Finally remedied the problem. For whatever reason I was using FFMS2 (v2.22) 64bit, once I swapped in the 32bit version all was well. DE back in business. Thought I mention this in case anyone out there runs into this problem.

[Atak_Snajpera]

Update
-added new OpenCL tab in settings with basic information about detected OpenCL platforms and GPU Devices
User can also easily assign what OpenCL GPU Device should be used for x264 encoder and KNLMeansCL plugin. For example APU for x264 and GPU for KNLMeansCL.

[Wildfire]

Update
-added new OpenCL tab in settings with basic information about detected OpenCL platforms and GPU Devices
User can also easily assign what OpenCL GPU Device should be used for x264 encoder and KNLMeansCL plugin. For example APU for x264 and GPU for KNLMeansCL.


Strangely enough, it's not detecting any OpenCL device. My GeForce GTX 980 Ti, however, most certainly supports OpenCL.

[Atak_Snajpera]

Most likely it can't detect OpenCL.dll file in x:\Windows\system32 or x:\Windows\SysWOW64

[Wildfire]

Most likely it can't detect OpenCL.dll file in x:\Windows\system32 or x:\Windows\SysWOW64

Well, the OpenCL.dll files are there, so that's not the problem. Other programs have no problem detecting the OpenCL capabilities of my computer (for example, Geeks3D GPU Caps Viewer).

[Atak_Snajpera]

Can you run OpenCLinfo.exe in console?

[Wildfire]

Can you run OpenCLinfo.exe in console?

There's no file like that anywhere on my system. Perhaps something is missing in the RipBot264 package?

[Atak_Snajpera]

what does update_log.txt say?

[Wildfire]

what does update_log.txt say?


2016-03-14 20:41:08 : =========================[UPDATER ACTIVATED]=========================
2016-03-14 20:41:08 : Installing updates...
2016-03-14 20:41:08 : [ERROR] C:\Program Files (x86)\RipBot264\Updates\x264.zip is corrupted. CRC32 mismatch. Expected value was B46524A9 but got 6768236F
2016-03-14 20:41:08 : File C:\Program Files (x86)\RipBot264\Updates\x264.zip has been deleted.
2016-03-14 20:41:08 : Installation complete.
2016-03-14 20:41:08 : =========================[UPDATER ACTIVATED]=========================
2016-03-14 20:41:08 : Looking for correct UUID link in http://atak-snajpera.5v.pl/
2016-03-14 20:41:08 : [SUCCESS] http://atak-snajpera.5v.pl/ has correct UUID link a5e3e5d3-67da-4504-950a-4963b18b0a3a
2016-03-14 20:41:08 : Downloading update file http://atak-snajpera.5v.pl/ripbot264update/update.zip
2016-03-14 20:41:09 : [SUCCESS] C:\Program Files (x86)\RipBot264\Updates\update.zip saved!
2016-03-14 20:41:09 : CRC32 value has not changed for [core]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [Aften]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [avs2avi]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [avs2pipemod]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [avs2yuv]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [AVSMeter]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [ax]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [BDSup2Sub]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [ChapterXtractor]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [dgAVCDec]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [dgindex]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [DownloadPoster]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [eac3to]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [ffmpeg]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [fhgaacenc]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [Fonts]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [MediaInfo]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [mkvtoolnix]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [ModifyChapters]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [mp4box]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [mpc]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [opus-tools]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [PgcDemux]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [Process]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [remuxtool]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [SetACL]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [ssatosrt]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [tsmuxer]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [vjoin]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [VSRip]. Update is not required.
2016-03-14 20:41:09 : CRC32 value has not changed for [wolcmd]. Update is not required.
2016-03-14 20:41:09 : Update for [x264] detected
2016-03-14 20:41:09 : Downloading file http://atak-snajpera.5v.pl/ripbot264update/x264.zip to C:\Program Files (x86)\RipBot264\Updates\x264.zip
2016-03-14 20:42:05 : =========================[UPDATER ACTIVATED]=========================
2016-03-14 20:42:05 : Installing updates...
2016-03-14 20:42:05 : [ERROR] C:\Program Files (x86)\RipBot264\Updates\x264.zip is corrupted. CRC32 mismatch. Expected value was B46524A9 but got BCB96293
2016-03-14 20:42:05 : File C:\Program Files (x86)\RipBot264\Updates\x264.zip has been deleted.
2016-03-14 20:42:05 : Installation complete.
2016-03-14 20:42:05 : =========================[UPDATER ACTIVATED]=========================
2016-03-14 20:42:05 : Looking for correct UUID link in http://atak-snajpera.5v.pl/
2016-03-14 20:42:06 : [SUCCESS] http://atak-snajpera.5v.pl/ has correct UUID link a5e3e5d3-67da-4504-950a-4963b18b0a3a
2016-03-14 20:42:06 : Downloading update file http://atak-snajpera.5v.pl/ripbot264update/update.zip
2016-03-14 20:42:06 : [SUCCESS] C:\Program Files (x86)\RipBot264\Updates\update.zip saved!
2016-03-14 20:42:06 : CRC32 value has not changed for [core]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [Aften]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [avs2avi]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [avs2pipemod]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [avs2yuv]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [AVSMeter]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [ax]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [BDSup2Sub]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [ChapterXtractor]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [dgAVCDec]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [dgindex]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [DownloadPoster]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [eac3to]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [ffmpeg]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [fhgaacenc]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [Fonts]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [MediaInfo]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [mkvtoolnix]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [ModifyChapters]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [mp4box]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [mpc]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [opus-tools]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [PgcDemux]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [Process]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [remuxtool]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [SetACL]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [ssatosrt]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [tsmuxer]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [vjoin]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [VSRip]. Update is not required.
2016-03-14 20:42:06 : CRC32 value has not changed for [wolcmd]. Update is not required.
2016-03-14 20:42:06 : Update for [x264] detected
2016-03-14 20:42:06 : Downloading file http://atak-snajpera.5v.pl/ripbot264update/x264.zip to C:\Program Files (x86)\RipBot264\Updates\x264.zip


Strange, that x264.zip seems to be corrupted every time the updater tries. I finally tried downloading it manually and then it's okay.

Hey... I now notice in the update log there's an OpenCL zip. But that wasn't part of the x264.zip -- did you change something at your end? :?

Let's see.... well, now there IS an OpenCLinfo.exe file. Yay. :)


Platform 0.
Name : NVIDIA CUDA
Vendor : NVIDIA Corporation
Version : OpenCL 1.2 CUDA 8.0.0
Profile : FULL_PROFILE
Extensions : cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_d3d10_sharing cl_khr_d3d10_sharing cl_nv_d3d11_sharing cl_nv_copy_opts

0.0 Device name : GeForce GTX 980 Ti
Hardware version : OpenCL 1.2 CUDA
Software version : 364.51
OpenCL C version : OpenCL C 1.2
Compute units : 22


RipBot264 itself, however, still shows no OpenCL devices.

[Atak_Snajpera]

Wait for tomorrow. I think your windows is still using cached update.zip file.

[Wildfire]

Wait for tomorrow. I think your windows is still using cached update.zip file.

I just removed the entire RipBot264 folder, cleared all temp files using CCleaner and then installed from scratch using the 7Zip archive from your first post. Issue remains the same.

[dv8r]

Ripbot just updated for me and now it's broken. When I start ripbot it says List Index Out Of Bounds (7). If i get past this it won't open a video file. It was just working great an hour ago until i restarted it and it updated.

[guest]

No problems here, after the biggest update we've had in a while :)

So Atak, can "we" have a little explanation of what "x264 OpenCL acceleration" does in the new OpenCL tab ??

Is this a new addition, or now just control of it ??

Also, just a reminder.....is asked about this a little while back........

Would there be any chance of including a volume adjustment feature, either dB, or % ??

[dv8r]

it's doing the same thing on all my machines. Updated now they all get the same error. Not sure why. Windows 10 Pro 64 bit. I tried deleting my old ripbot folder and downloading a new one but i get the same error.

[Wildfire]

Wait for tomorrow. I think your windows is still using cached update.zip file.

Still nothing... :'(

[dv8r]

when I try to open a video file I get this error

Exception EConvertError in module RipBot264.exe at 0000943E.
" is not a valid floating point value.

Don't know what that means but I'm getting it on 4 machines all running Windows 10 Pro 64 bit.

[dv8r]

I downloaded the old folder again and turned off auto update on all machines and its working. Guess I'll have to stick with this older version until this problem is figured out. I'm thinking it's something in the config files maybe. Bummer :(

[howzz]

after an auto update that ran on my v 1.19.2 today which seemed to have updated it to v 1.19.3. after firing it back up, it spat out an error "List index out of bounds 20". so i went ahead and tried to visit the official download link here to re-download a fresh copy of v 1.19.2. only upon extraction, it picked up a virus. The EXE picked up was "modifychapters.exe" as Win32:Malware-gen. tried re-downloading it from official download link again and received the same virus. not only that, even after quarantine, tried firing up the v 1.19.2, the auto update ran again and fired back up, and got the same "List index out of bounds 20".

been using ripbot for a couple years now. anyone care to chime in? if this doesn't get sorted, might have to resort to handbrake.

[Atak_Snajpera]

send me openclinfo.txt and please do not use attachments.

modifychapters.exe send to virustotal.com and also show us what you get.

[Wishbringer]

Platform 0.
Name : Intel(R) OpenCL
Vendor : Intel(R) Corporation
Version : OpenCL 1.2
Profile : FULL_PROFILE
Extensions : cl_khr_fp64 cl_khr_icd cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_byte_addressable_store cl_intel_printf cl_ext_device_fission cl_intel_exec_by_local_thread cl_khr_gl_sharing cl_intel_dx9_media_sharing cl_khr_dx9_media_sharing cl_khr_d3d11_sharing

Platform 1.
Name : AMD Accelerated Parallel Processing
Vendor : Advanced Micro Devices, Inc.
Version : OpenCL 2.0 AMD-APP (1912.5)
Profile : FULL_PROFILE
Extensions : cl_khr_icd cl_khr_d3d10_sharing cl_khr_d3d11_sharing cl_khr_dx9_media_sharing cl_amd_event_callback cl_amd_offline_devices

1.0 Device name : Tahiti
Hardware version : OpenCL 1.2 AMD-APP (1912.5)
Software version : 1912.5 (VM)
OpenCL C version : OpenCL C 1.2
Compute units : 32

And no selectable Devices in Settings too.

[howzz]

here is the Virustotal.com scan result. looks like 3 out of 44 AV picked it up as malware.

SHA256: c3c81db9b9ecd2d6e30518d300e8f2f9a7cc08fa0eb26aaabf7bfc08646ebd5d
File name: RipBot264v1.19.2.7z
Detection ratio: 3 / 44
Analysis date: 2016-03-18 00:50:59 UTC ( 1 minute ago )
0 1
Analysis
Relationships
Additional information
Comments
Votes
Antivirus Result Update
AegisLab Possible.Virus.Gen!c 20160317
Avast Win32:Malware-gen 20160317
Jiangmin Worm/NetSky.ji 20160318
ALYac 20160317
AVG 20160318
AVware 20160318
Ad-Aware 20160317
Agnitum 20160316
AhnLab-V3 20160317
Alibaba 20160317
Antiy-AVL 20160317
Arcabit 20160317
Baidu 20160317
Baidu-International 20160317
BitDefender 20160318
Bkav 20160317
ByteHero 20160318
CAT-QuickHeal 20160317
CMC 20160316
ClamAV 20160317
Comodo 20160318
Cyren 20160318
DrWeb 20160318
ESET-NOD32 20160317
Emsisoft 20160318
F-Prot 20160318
F-Secure 20160318
Fortinet 20160317
GData 20160318
Ikarus 20160318
K7AntiVirus 20160317
K7GW 20160318
Kaspersky 20160317
Malwarebytes 20160317
McAfee 20160318
McAfee-GW-Edition 20160317
eScan 20160317
Microsoft 20160316
NANO-Antivirus 20160317
Panda 20160317
Qihoo-360 20160318
Rising 20160317
SUPERAntiSpyware 20160317
Sophos 20160317
Symantec 20160317
Tencent 20160318
TheHacker 20160315
TrendMicro 20160317
TrendMicro-HouseCall 20160317
VBA32 20160317
VIPRE 20160317
ViRobot 20160317
Zillya 20160317
Zoner 20160317
nProtect 20160317

[legend]

While Updating I Found this

http://s27.postimg.org/6p13z2p03/ripbot.png

[Atak_Snajpera]

open updater.ini in notepad and change that date to 2000-01-01 00:00:00

[guest]

Hey Atak, I've been thinking about the trouble some guys are having with updates & version numbers.

With all due respect, may I suggest that with the next update, you could post a full setup (like you used to) and with a build number of, say, 1.19.4, and then after that, the auto updates continue for the new version for a time, then release another full version.

It's just that if someone wants to start from stratch, they don't have to start with what is now a fairly old build of 1.19.2., and then have to get all the updates that were released since then.

[Atak_Snajpera]

yes I will do that today but it won't be 1.19.4 but 'official 1.19.3'

[soneca]

Atak, it would be good to be updated in VideoHelp too.

[guest]

yes I will do that today but it won't be 1.19.4 but 'official 1.19.3'

You've already done this ?!?! :)

OK, I see that you have also added an audio amplification option, and I hate to be a PITA, but could you also have it go negative, as well, for files that are too loud ???

And what unit of measure are the adjustments ??

Sorry, and :thanks:

[Atak_Snajpera]

unit is multiplication.
negative number won't fix too loud sounds.

[guest]

unit is multiplication.
negative number won't fix too loud sounds.

OK, will experiment.

Thanks

[soneca]

After this latest update the PC that works with KNLMeansCL no longer works. :mad:

http://s20.postimg.org/b9n3ln34d/ripbot1.png

http://s20.postimg.org/x7jkffi4t/ripbot.png

[Atak_Snajpera]

This is your friend

vc_redist.x86.exe
https://www.microsoft.com/en-us/download/details.aspx?id=48145

[soneca]

With the 2013 version of Visual C ++ does not work anymore?

[Atak_Snajpera]

nope -> http://forum.doom9.org/showthread.php?p=1699497#post1699497

[soneca]

Okay, I'll install! :thanks:

[soneca]

Started working again! :p

[deanoboxer]

Norton identified RipBot264 Encoding Client.exe as malware this morning. Anybody else get the same?

[Atak_Snajpera]

Yet another stupid complain from retarded anti-virus software. I'm losing patience to this...
https://www.virustotal.com/en/file/187d0a4df1eef927370e5bceb778aa486469ee3c93fd5ab4a5b2ac2b8ef43111/analysis/1458487433/

I'm starting to think that currently it is impossible to write a program without any false positive alarms.

[MaistroX]

Hi Atak_Snajpera!

Thx for the great work throu the years with development of RipBot264! :thanks:

Have a question that you might be able to answer...

I have allways been able to use RipBot264 without any problems, but the recent 6 month my PC have started to freez so I have been forced to restart it fully to get it to work again.

The problem ONLY appears with RipBot264 and it does freez in the first pass or in the beginning of the second.

As it only affects RipBot264 and no other software I have, my thought is that it has something to do with that RipBot264 gets my processor to 100% on all cores.

Any chance in RipBot264 that I can set it to ONLY use a certain amout of the processors Power, like only 80% or simular?

Regards MaistroX

[guest]

Hi Atak_Snajpera!

Thx for the great work throu the years with development of RipBot264! :thanks:

Have a question that you might be able to answer...

I have allways been able to use RipBot264 without any problems, but the recent 6 month my PC have started to freez so I have been forced to restart it fully to get it to work again.

The problem ONLY appears with RipBot264 and it does freez in the first pass or in the beginning of the second.

As it only affects RipBot264 and no other software I have, my thought is that it has something to do with that RipBot264 gets my processor to 100% on all cores.

Any chance in RipBot264 that I can set it to ONLY use a certain amout of the processors Power, like only 80% or simular?

Regards MaistroX

A couple of questions for you :-

1st:- is your PC overclocked ???
Ripbot could be considered as a stress test, as it DOES run the CPU @ 100% most of the time.

2nd:- how clean is it inside your case & motherboard etc ??
Sounds like it might be overheating, check & clean the CPU fan(s), and video card(s) fan(s).

I'm pretty sure that Ripbot can't be "throttled".

[soneca]

Yet another stupid complain from retarded anti-virus software. I'm losing patience to this...
https://www.virustotal.com/en/file/187d0a4df1eef927370e5bceb778aa486469ee3c93fd5ab4a5b2ac2b8ef43111/analysis/1458487433/

I'm starting to think that currently it is impossible to write a program without any false positive alarms.

It is also why I use Nod32 long ago. :cool: