RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Viper714]

Atak_Snajpera,
I am re-evaluating my recoding procedures for a Blu Ray DVD. Earlier I believed that using the "2-Pass" mode was the best. Only because the 1-Pass would evaluate the rip and then the 2-Pass would encode it more effectively. Furthermore, using this method I can see an estimated file size of the final product. Typically I would use a KBPS of 8192, however since one of your past responses you mentioned that I was not limited to that. So I been pushing more 9000 or 10,000. This of course increases the file size.

Is there a actual science or formula that I could use that would give me a good movie recode yet not be huge in size?

I know of the CQ mode, but is this a better option at a particular CRF level?

Is there a resource on the web where I can read about this?

Appreciate your and the rest of the groups patience.

:thanks:

[Atak_Snajpera]

you are trying to invent a wheel again. CQ does exactly what you want! End of story.

[Viper714]

you are trying to invent a wheel again. CQ does exactly what you want! End of story.

There's always a way to build a better mouse trap or wheel!!
http://i361.photobucket.com/albums/oo54/pcubillos/Smileys/Forum%20Line/whistle.gif (http://s361.photobucket.com/user/pcubillos/media/Smileys/Forum%20Line/whistle.gif.html)
Okay I will start using CQ!!

Thank you...

[73ChargerFan]

Even Fred Flintstone knew a round wheel was optimal. :D

The RipBot264 guide Viper214 linked to is over 4 years old. Are there any others that are recommended? Thanks.

[soneca]

Atak, thanks for the new version! ;)

[Wishbringer]

yep, just recognized 1.19.0 at videohelp.com.
Will test it asap.

[soneca]

Well, here it has not changed.

Atak, the path of the logs were changed in this version?

[Atak_Snajpera]

see job folder.

[guest]

yep, just recognized 1.19.0 at videohelp.com.
Will test it asap.

Yes, I was a bit puzzled by soneca's comment about a new version.

Atak forgot to edit the version number on this forum.

So, now I can say, thanks for the new version, they've been coming thick & fast, recently :)

Cheers

[Atak_Snajpera]

Atak forgot to edit the version number on this forum.
I didn't forget. There is bug in this forum. After few years you lose rights to change thread's title.
http://forum.doom9.org/showthread.php?t=172423
http://forum.doom9.org/showthread.php?t=171711

[guest]

I didn't forget. There is bug in this forum. After few years you lose rights to change thread's title.
http://forum.doom9.org/showthread.php?t=172423
http://forum.doom9.org/showthread.php?t=171711

OK, sorry about that, then......so I hope you can get to the bottom of that, and get that "fixed", as that was the most obvious way, "we" knew there was a version update.

Cheers :o

[Wishbringer]

Or start a new thread with same starting post and reference to this one.

my2ct ;)

Btw: can't even thank enough for this nice little piece of software.
Did all tasks manually before.

[byteshare]

I was trying to search for this but can't seem to get a good answer. How does ripbot handle if one server goes down when using Multi-computer Distributed Encoding? Examples, one computer crashes, or if the power goes out and one of my battery backups doesn't last as long as the others before the power comes back?

I'm just wondering if one goes down if it takes out the chain (assuming the main server doesn't go down)?

[slalom]

Yes it does take it out

[Atak_Snajpera]

I'm just wondering if one goes down if it takes out the chain (assuming the main server doesn't go down)?
If client loses connection with specific server then chunk assigned with that server will come back to queue. Encoding client will assign again unfinished chunk to next IDLE server.

[byteshare]

If client loses connection with specific server then chunk assigned with that server will come back to queue. Encoding client will assign again unfinished chunk to next IDLE server.
Oh, sweet! I was just worried with four computers that using this method would make it even less stable, but looks like you have that base covered. Thank you for responding.

[slalom]

@Atak
For v.1.19

// it will use 64bit version of x264 or x265 on 64bit Windows. up to 10% faster encoding speed.
is set to 1 rather than 0.2. Is that ok?

[Wishbringer]

@slalom:
// it will use 64bit version of x264 or x265 on 64bit Windows. up to 10% faster encoding speed.
Use64bitEncoder=1
---------------------
// Sharpening Strength after resizing (Default=0.2)
SharpeningStrength=0.2

Maybe you read the wrong line.
64bit is a switch (true/false = 1/0)

and was implemented long ago:
v1.13.0
Added: support for x264 64bit (up to 10% faster encoding)

[slalom]

You're right
There must be a mistake on that .ini, checked older versions too, the value is 1

[soneca]

There seems to be a problem in the aspect ratio...

Preview is correct

http://s20.postimg.org/45s3ysp71/preview.png

Settings

http://s20.postimg.org/p1eea1le5/RIPBOT.png

Result

http://s20.postimg.org/8g6rudua5/result.png


Aspect ratio by mediainfo > 3.184

Already converted some bd's with the same ratio without problems using the latest version of Ripbot, but I'll redo it from scratch.

Edit: The problem is the strange blu-ray, nonstandard...

[Jake802]

Hi everyone,

My completed files are not showing up at all. Any ideas?

[Atak_Snajpera]

check log.

[g0th1ckn1ght]

I was wondering how do I keep the 7.1 DTS MA / True HD audio tracks in my mkv.

In the select stream window i select the DTS Master Audio, English, 7.1 channels, 24bits, 48khz option. At the Encoding Settings window it only show 6 channels i have the profile set to XX.Copy Stream.XX.

I would really like all audio channels (7.1) in my converts, so any help would be appreciated

[Atak_Snajpera]

If you selected demux option and then Copy Stream then your final mkv should have original untouched 7.1 audio. You can verify number of channels in mkv in mediainfo.
You see only 6 channels in gui because current decoder sees only core part.

[g0th1ckn1ght]

Thank you very much Atak.

I will give that try and see how it goes.

Thanks again

[Jake802]

Atak,

I got rid of the damn log file, but I originally checked it and it said the file was were it was supposed to be, but the file was not there. Let me run it again and I will keep and post the log this time.

Sorry!

[Jake802]

Ok I am not seeing a log file and nothing showed up still.....Alright even weirder When I just went to open up RipBot it opened to where the file is. I can now see the file but cannot do anything with it and it does not show in my Windows Explorer when I try to access it.......

[fantasmanegro]

Using aac 5.1 is too much for my 2.0 TV speakers... so do mixing to stereo is OK for me but, the voice is too low ...

is there a way to increase the volume in voice channel or decrease a little the background and effects?

[byteshare]

Using aac 5.1 is too much for my 2.0 TV speakers... so do mixing to stereo is OK for me but, the voice is too low ...

is there a way to increase the volume in voice channel or decrease a little the background and effects?
You should try normalization 200% Or, you can use another program to process the audio the way you need.

[Atak_Snajpera]

Using aac 5.1 is too much for my 2.0 TV speakers... so do mixing to stereo is OK for me but, the voice is too low ...

is there a way to increase the volume in voice channel or decrease a little the background and effects?

Open DownMixAudio.avs in notepad
and increase this value
function DownMix2Stereo(clip a)
{
a=ConvertAudioToFloat(a)
fl = GetChannel(a, 1)
fr = GetChannel(a, 2)
c = GetChannel(a, 3)
lfe = GetChannel(a, 4)
sl = GetChannel(a, 5)
sr = GetChannel(a, 6)
l_sl = MixAudio(fl, sl, 0.2929, 0.2929)
c_lfe = MixAudio(lfe, c, 0.2071, 0.2071)
r_sr = MixAudio(fr, sr, 0.2929, 0.2929)
l = MixAudio(l_sl, c_lfe, 1.0, 1.0)
r = MixAudio(r_sr, c_lfe, 1.0, 1.0)
return MergeChannels(l, r)
}

Save and verify loudness in ripbot264 (Preview script). Audio Normalization set at 100%.

[fantasmanegro]

Open DownMixAudio.avs in notepad
and increase this value
function DownMix2Stereo(clip a)
{
a=ConvertAudioToFloat(a)
fl = GetChannel(a, 1)
fr = GetChannel(a, 2)
c = GetChannel(a, 3)
lfe = GetChannel(a, 4)
sl = GetChannel(a, 5)
sr = GetChannel(a, 6)
l_sl = MixAudio(fl, sl, 0.2929, 0.2929)
c_lfe = MixAudio(lfe, c, 0.2071, 0.2071)
r_sr = MixAudio(fr, sr, 0.2929, 0.2929)
l = MixAudio(l_sl, c_lfe, 1.0, 1.0)
r = MixAudio(r_sr, c_lfe, 1.0, 1.0)
return MergeChannels(l, r)
}

Save and verify loudness in ripbot264 (Preview script). Audio Normalization set at 100%.

Thank you Atak, I will try this right now. ..

[slalom]

I got this error on one mkv
"DirectShowSource:Renderfile, the filter graph manager won't talk to me
(E:\Temp\RipBot264temp\job25\getinfo.avs, line 2)"

this is the avs file

video=DirectShowSource("E:\***\***.mkv",audio=false).ConvertToYV12()
LoadPlugin("D:\DirectCD\Program Setup Files\RipBot264v1.19.0\tools\AviSynth plugins\NicAudio\NicAudio.dll")
audio=NicDTSSource("E:\Temp\RipBot264temp\job25\33_audio_English.dts")
AudioDub(video,audio)
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Framecount")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Framerate")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","AudioRate")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","AudioChannels")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","AudioLength")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Width")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Height ")
Trim(0,-1)

[Jake802]

Is the program not compatible with Windows 10? Maybe that's my issue?

[guest]

Is the program not compatible with Windows 10? Maybe that's my issue?

I have been using Windows 10 x64 for several week's now, and Ripbot seems to be behaving itself :)

[Jake802]

It turns out this isnt the only program I am having issues with. Both RipBot and PowerISO are making my files and they do not show up in Windows Explorer, but they do show up when I use to program(s) and go to that same location. I don't know what the heck is going on! Thanks for the input guys!

[byteshare]

It turns out this isnt the only program I am having issues with. Both RipBot and PowerISO are making my files and they do not show up in Windows Explorer, but they do show up when I use to program(s) and go to that same location. I don't know what the heck is going on! Thanks for the input guys!
Are they maybe set to hidden? Do you have hidden files turned on?

[Jake802]

Yea I thought the same thing I checked. It's set to show hidden files. I have tried searching around, havent had any luck yet!

Thanks!

[byteshare]

Yea I thought the same thing I checked. It's set to show hidden files. I have tried searching around, havent had any luck yet!
This might sound redundant, but have you tried a looking for the files with a live book in Linux? I wonder if windows is hiding them for some reason? Are you on Win10?

[Jake802]

I am using WIndows 10. I just wanted to let everyone no, problem is solved. It appears to have been the Free Comodo Anti-Virus I was using with it. The minute I removed it, I could see and access those files! Thanks everyone!

[lemaireus]

Atak, I updated to v1.19.0 today and discovered that the 10 bit x265 you've provided this time is nearly 15MBs in size. Till v1.18.2 the 10 bit x265 file bundled with RipBot used to be about 4.5MB, and I used to update that twice a week from http://builds.x265.eu/ which linked to an almost daily updated 16 bit executable roughly the same size as the one provided in v1.18.2. The URL for x265 that you've listed in the 'Tools' button--a wonderful addition, thank you!--links to an x265 executable that is 4.5 to 5MBs. So that still does not provide me with the same 10 bit x265 which you've provided with the latest version of RibBot. My concerns, most likely unfounded, are as follows:

1. I am assuming that the settings you've provided for HEVC encoding--I've been using the 10 bit progressive profile--are optimized for the x265 you've provided. So ideally I should do my weekly update using the same source as the one you've provided the settings for.
2. With the same assumption: is there a problem if I update on a weekly basis given that your settings are written for the x265 version you provided at the time of v1.19.0 release.

If RipBot just needs an x265 executable whatever the source might be then just let me know and then I can go ahead and keep updating from http://builds.x265.eu/ or whichever other site provides regular updates. If there is a particular version of x265 that would work better with RipBot then would you please provide a link for updates which, with x265 development going the way it is, can provide significant boosts in both speed and quality? As I mentioned the x265 link in the 'Tools' section does not link to the file you've bundled in Tools>x265.
Thanks!

[Atak_Snajpera]

1. I am assuming that the settings you've provided for HEVC encoding--I've been using the 10 bit progressive profile--are optimized for the x265 you've provided. So ideally I should do my weekly update using the same source as the one you've provided the settings for.
Nope.

2. With the same assumption: is there a problem if I update on a weekly basis given that your settings are written for the x265 version you provided at the time of v1.19.0 release.
Nope.

Basically use any x265 binaries you like. There is no special optimization for specific build.

[lemaireus]

Basically use any x265 binaries you like. There is no special optimization for specific build.

Wonderful! Thanks for confirming.

[Marban]

hello, i have got encode a open matte movie and the result of the encode have black borders over and under. What is wrong?
I have no change the resolution.

Log:

C:\>"C:\Users\marban\Desktop\Programme\Ripbot24\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job1\job1.avs" -o - | "C:\Users\marban\Desktop\Programme\Ripbot24\tools\x264\x264_x64.exe" --crf 22 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 2883 --sar 1:1 --level 4.1 --preset veryslow --tune film --ref 4 --no-fast-pskip --rc-lookahead 120 --deblock -1:-2 --qpmin 0 --aq-strength 0.9 --sar 12:11 --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -
y4m [info]: 1920x1080p 12:11 @ 10000000/417083 fps (cfr)
x264 [info]: using SAR=12/11
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
x264 [info]: profile High, level 4.1
C:\Temp\RipBot264temp\job1\job1.avs: 1920x1080, 10000000/417083 fps, 2884 frames

x264 [info]: frame I:16 Avg QP:19.35 size: 66944
x264 [info]: frame P:888 Avg QP:22.62 size: 39242
x264 [info]: frame B:1979 Avg QP:23.26 size: 21972
x264 [info]: consecutive B-frames: 6.3% 13.9% 8.2% 43.8% 6.8% 9.2% 2.7% 7.2% 1.9%
x264 [info]: mb I I16..4: 24.1% 72.9% 3.0%
x264 [info]: mb P I16..4: 13.6% 39.4% 0.4% P16..4: 35.6% 3.5% 2.2% 0.0% 0.0% skip: 5.3%
x264 [info]: mb B I16..4: 1.6% 5.2% 0.0% B16..8: 39.8% 5.8% 0.8% direct:12.7% skip:34.0% L0:45.7% L1:50.9% BI: 3.4%
x264 [info]: 8x8 transform intra:74.3% inter:88.1%
x264 [info]: direct mvs spatial:98.6% temporal:1.4%
x264 [info]: coded y,uvDC,uvAC intra: 50.1% 52.3% 2.1% inter: 21.5% 31.9% 0.0%
x264 [info]: i16 v,h,dc,p: 25% 20% 18% 37%
x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 11% 8% 15% 8% 11% 11% 11% 11% 14%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 8% 4% 9% 13% 14% 12% 13% 13%
x264 [info]: i8c dc,h,v,p: 37% 36% 22% 5%
x264 [info]: Weighted P-Frames: Y:6.3% UV:5.4%
x264 [info]: ref P L0: 55.9% 7.1% 22.4% 12.7% 1.8% 0.1%
x264 [info]: ref B L0: 84.8% 11.9% 3.3%
x264 [info]: ref B L1: 93.8% 6.2%
x264 [info]: kb/s:5282.53

encoded 2883 frames, 10.72 fps, 5282.53 kb/s

C:\>"C:\Users\marban\Desktop\Programme\Ripbot24\tools\mkvtoolnix\mkvmerge.exe" -o "E:\Fight Club HDTV - (Open Matte) (1)-001_.mkv" --compression 0:none --title "Fight Club HDTV - (Open Matte) (1)-001_" --default-duration 0:24000/1001fps "C:\Temp\RipBot264temp\video.264" --compression 0:none --language 0:ger "C:\Temp\RipBot264temp\job1\Encoded_Audio_1.ac3" --chapters "C:\Temp\RipBot264temp\job1\chapters.txt"
mkvmerge v8.2.0 ('World of Adventure') 32bit
'C:\Temp\RipBot264temp\video.264': Using the demultiplexer for the format 'AVC/h.264'.
'C:\Temp\RipBot264temp\job1\Encoded_Audio_1.ac3': Using the demultiplexer for the format 'AC3'.
'C:\Temp\RipBot264temp\video.264' track 0: Using the output module for the format 'AVC/h.264 (unframed)'.
'C:\Temp\RipBot264temp\job1\Encoded_Audio_1.ac3' track 0: Using the output module for the format 'AC3'.
The file 'E:\Fight Club HDTV - (Open Matte) (1)-001_.mkv' has been opened for writing.
'C:\Temp\RipBot264temp\video.264' track 0: Extracted the aspect ratio information from the MPEG-4 layer 10 (AVC) video data and set the display dimensions to 2095/1080.


The cue entries (the index) are being written...
Muxing took 4 seconds.
-------------------------

Elapsed Time: 00h:04m:34s

[Atak_Snajpera]

Because you have forgotten to crop those borders in ripbot.

[slalom]

Hi Atak,
this is a few posts back

I got this error on one mkv
"DirectShowSource:Renderfile, the filter graph manager won't talk to me
(E:\Temp\RipBot264temp\job25\getinfo.avs, line 2)"

this is the avs file

video=DirectShowSource("E:\***\***.mkv",audio=false).ConvertToYV12()
LoadPlugin("D:\DirectCD\Program Setup Files\RipBot264v1.19.0\tools\AviSynth plugins\NicAudio\NicAudio.dll")
audio=NicDTSSource("E:\Temp\RipBot264temp\job25\33_audio_English.dts")
AudioDub(video,audio)
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Framecount")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Framerate")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","AudioRate")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","AudioChannels")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","AudioLength")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Width")
WriteFile("E:\Temp\RipBot264temp\job25\info.txt","Height ")
Trim(0,-1)

Do you have any sugestions?

(your pm's are full!)

[Atak_Snajpera]

Post mediainfo report. Maybe your mkv was encoded by some odd codec.

[slalom]

Here it is

General
Unique ID : 170740912739023209494050400861862561038 (0x807380EFB48043C2A82371C00E49050E)
Complete name : E:\***.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 24.8 GiB
Duration : 1h 33mn
Overall bit rate mode : Variable
Overall bit rate : 38.1 Mbps
Movie name : ***
Encoded date : UTC 2015-06-18 20:44:14
Writing application : mkvmerge v7.9.0 ('Birds') 64bit
Writing library : libebml v1.3.1 + libmatroska v1.4.2
_STATISTICS_WRITING_APP : mkvmerge v7.9.0 ('Birds') 64bit
_STATISTICS_WRITING_DATE_UTC : 2015-06-18 20:44:14
_STATISTICS_TAGS : BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
DURATION : 01:20:59.396000000
NUMBER_OF_FRAMES : 93
NUMBER_OF_BYTES : 57557

Video
ID : 33
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 1h 33mn
Bit rate mode : Constant
Nominal bit rate : 35.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.704
Title : MPEG-4 AVC / 35000 kbps / 1080p / 23.976 fps / 16:9 / High Profile 4.1
Language : English
Default : Yes
Forced : No

Audio
ID : 34
Format : DTS
Format/Info : Digital Theater Systems
Format profile : MA / Core
Mode : 16
Format settings, Endianness : Big
Codec ID : A_DTS
Duration : 1h 33mn
Bit rate mode : Variable
Bit rate : Unknown / 1 509 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Compression mode : Lossless / Lossy
Title : DTS-HD Master Audio 5.1 / 48 kHz / 3956 kbps / 24-bit (DTS Core: 5.1 / 48 kHz / 1509 kbps / 24-bit)
Language : English
Default : Yes
Forced : No

Text #1
ID : 1
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Language : Japanese
Default : No
Forced : No
DURATION : 01:33:10.627000000
NUMBER_OF_FRAMES : 134041
NUMBER_OF_BYTES : 23708627328
_STATISTICS_WRITING_APP : mkvmerge v7.9.0 ('Birds') 64bit
_STATISTICS_WRITING_DATE_UTC : 2015-06-18 20:44:14
_STATISTICS_TAGS : BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES

Text #2
ID : 2
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Language : Japanese
Default : No
Forced : No
DURATION : 01:33:11.030000000
NUMBER_OF_FRAMES : 524159
NUMBER_OF_BYTES : 2764814692
_STATISTICS_WRITING_APP : mkvmerge v7.9.0 ('Birds') 64bit
_STATISTICS_WRITING_DATE_UTC : 2015-06-18 20:44:14
_STATISTICS_TAGS : BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES

Text #3
ID : 3
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Language : English
Default : No
Forced : No

Text #4
ID : 4
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Language : French
Default : No
Forced : No

Text #5
ID : 5
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Language : German
Default : No
Forced : No

Text #6
ID : 6
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Language : Italian
Default : No
Forced : No


Had to remove some part of the subs, too many characters to post, I hope you don't mind

[Pulp Catalyst]

would you be able to support a yadifmod > nnedi3 option in deinterlacing (with 25fps and a 50fps)... as i find nnedi3 really does do a great job vs yadif by itself?

Regards,

p.s. on the batch screen, can you include a denoise option there... as i can't use batch right now as i need to use denoise on every episode.

Thanks,

[slalom]

Post mediainfo report. Maybe your mkv was encoded by some odd codec.
I removed the subs that I didn't want and the file added ok
Everything is OK

[manono]

would you be able to support a yadifmod > nnedi3 option in deinterlacing (with 25fps and a 50fps)... as i find nnedi3 really does do a great job vs yadif by itself?

You can't create the script yourself with YadifMod, and then open that in RipBot264? Once you begin this, there'll be no end to filter requests. Maybe someone else will come along next wanting to deinterlace with QTGMC.

Alternatively, you can create a lossless AVI using an AVISynth script that includes the filter you want and then open the AVI in RipBot. Or use MeGUI which allows for editing the AviSynth scripts to add any filters not already available.

Once you get the ability to do anything you like, the 'Bot' aspect of the program kind of disappears. Sorry, and of course I can't speak for Atak_Snajpera, but what you're asking requires the program to go in a new direction and one of its good points is its ease of use. Me, I do all the heavy filtering before ever using RipBot, and only use it to do the final conversion (to x264/AAC/MP4) with no additional filtering.