RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Spasm]

He ran Prime95 for about 3 hours no issues with CPU. Ran HeavyLoad test for RAM, no issues. I'll have him update AVISynth.

Also try with simpler x265 command line...

This might help. I too was having random encoding server crashes after updating until I adjusted this setting:

https://i.imgur.com/f9QqePQ.jpg

Set at 0 (auto) = crashes. Anything else and it's back to normal.

[varekai]

Running RipBot will disable (revert?) avisynth 2.60 used in BD-RB.
So to be able to use BD-RB a new install of avisynth is needed.
Disabling RipBot autoupdate doesn't help.
Any solution to this?

[Atak_Snajpera]

Rename Install.cmd in Tools\AviSynth

[varekai]

Rename Install.cmd in Tools\AviSynthThanks for the info, worked like a charm! :D

[guest]

Hi Atak,

Um, trying to do some "Married With Children" episodes in batch lots.

Seems to be OK when doing them singularly, but not in batch using DE.

I get errors every time, at the end of the process before muxing, I guess.

This is the Job log (if that helps) :-

E:\>"C:\Users\Administrator\Documents\RipBot264v1.22.0\EncodingClient.exe" "E:\Temp\RipBot264temp\job1\job1_EncodingClient.meta"

E:\>"C:\Users\Administrator\Documents\RipBot264v1.22.0\tools\mp4box\mp4box.exe" -tmp "E:\Temp\RipBot264temp" -add "E:\Temp\RipBot264temp\video.264":name="Married with children s01e01 dvdrip xvid-fov-1" -fps 29.97 -add "E:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac":lang=und -mpeg4 -new "D:\Married With Children\Married With Children S01\New folder\Married with children s01e01 dvdrip xvid-fov-1.mp4"
AVC-H264 import - frame size 1280 x 720 at 29.970 FPS

AVC Import results: 41087 samples - Slices: 231 I 12339 P 28517 B - 41325 SEI - 227 IDR
Stream uses forward prediction - stream CTS offset: 2 frames
Opening file E:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac failed
Error importing E:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac:lang=und: Requested URL is not valid or cannot be found
-------------------------

Elapsed Time: 00h:21m:58s

Anything stick out as to what the problem might be ??

BTW, using very latest build & updates.

Cheers

[Atak_Snajpera]

Does E:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac exist?
What happens if manually execute EncodeAudio.cmd?

[guest]

Does E:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac exist?
What happens if manually execute EncodeAudio.cmd?

Just checked both...

No it doesn't exist, so where did this entry come from, and due to that, the .cmd doesn't do anything :(

[Atak_Snajpera]

It will be easier and faster if you send me whole job folder. (without those large files ofcourse)

[guest]

It will be easier and faster if you send me whole job folder. (without those large files ofcourse)

OK, should be here :-

http://www.mediafire.com/file/3eu3ezdhk94ded7/job1.rar

:thanks:

[Atak_Snajpera]

OK, should be here :-

http://www.mediafire.com/file/3eu3ezdhk94ded7/job1.rar

:thanks:

Fix available via auto-update.

[guest]

Fix available via auto-update.

Hi Atak,

Thanks so much for looking into this, I guess it was a "bug" of some sort.

So I have just finished doing a test after the new update, and I still had the original 13 job queue in place, as I had only done 3 before stopping due to the error.

So I didn't re load a new queue, instead I tested job 5, and it still errored, I had to re load job 1, as I deleted a few files from that when I rar'ed it up to send to you, and it worked to completion.

So I will reload the whole queue again, and it should be fine.

I'm still running Windows Server 2016, haven't quite finalized my Windows 7 situation, yet, but your Image Tool is doing a good job :)

Another thing I would like to mention again (referring to some PM's I sent you), I still don't think the Abort function works as well as it used to, when you could abort from the DE window.

Sure it abort's, after a short "think", but I don't have any luck with the job resuming from where it left off. :(

Anyway, it might work properly under W7.

Cheers

And thanks for your constant support of this great program you've created :)

[GZZ]

Hi Atak,
Another thing I would like to mention again (referring to some PM's I sent you), I still don't think the Abort function works as well as it used to, when you could abort from the DE window.


I can confirm that the Abort not always work as it should. Some time you press Abort and nothing happen, DE window keep running. Killing it in task manager makes the application to abort.

Pressing abort doing initialization (copy Video file in DE window) also dosnt work as it should.

[Atak_Snajpera]

Thanks so much for looking into this, I guess it was a "bug" of some sort.
Literally a typo (one word) in code! ;)

[byteshare]

He ran Prime95 for about 3 hours no issues for CPU. Ran HeavyLoad test for RAM, no issues. I'll have him update AVISynth.
AVISynth update didn't help
Also try with simpler x265 command line...
Will have him try this now. The issue isn't happening with StaxRip, not sure what is exactly different but I know there are lots of differences between the two, for example RipBot is better :D

[MaistroX]

Just tryed Another Movie with DE Mode Active in settings...

Fist off, it demuxes the *.mkv without subs (I choose all subs) and no Sound at all, even thou I have choosen to keep DTS-MA as first choice and DTS track as second.
(the *.mkv has DTS-MA and DTS tracks + 6 subtitles)

That´s DE Mode for me! *EDITED*

just tryed without DE Mode, and no sound or subtitles are avalibe after demux!!! :/

Please help!

Regards MaistroX

[MerolaC]

Atak, is there any chance that for the next release you add a lossless output for x264?
--qp0?

Thank you in advance!

[sneaker_ger]

It's --qp 0

But is this not possible with the current version? Instead of --qp 0 you can also use --crf 0 (8 bit encoding) or --crf -12 (10 bit encoding), I believe RipBot calls it "CQ".

[MerolaC]

It's --qp 0

But is this not possible with the current version? Instead of --qp 0 you can also use --crf 0 (8 bit encoding) or --crf -12 (10 bit encoding), I believe RipBot calls it "CQ".

Thank you for your comment.
Yes, I mistyped there the switch.
I will check.
But, i don't think crf is the same as qp 0.

[Atak_Snajpera]

Just tryed Another Movie with DE Mode Active in settings...

Fist off, it demuxes the *.mkv without subs (I choose all subs) and no Sound at all, even thou I have choosen to keep DTS-MA as first choice and DTS track as second.
(the *.mkv has DTS-MA and DTS tracks + 6 subtitles)

That´s DE Mode for me! *EDITED*

just tryed without DE Mode, and no sound or subtitles are avalibe after demux!!! :/

Please help!

Regards MaistroX
Remove current ripbot264 and download again v1.22.0.

[MerolaC]

I realized that I can just modify the job1_EncodeVideoPass1.cmd script.
Thank you.

[Atak_Snajpera]

I think you can force --qp 0 in profile.

[MerolaC]

I think you can force --qp 0 in profile.

Yes, you can, but the cfr switch stays there and i think it overides the qp one.
Still, since I can modify the cmd, it's not problem.

Thank you Atak!

[sneaker_ger]

But, i don't think crf is the same as qp 0.
Result is the same whether you activate lossless encoding via --crf or --qp. Only to keep in mind that during 10 bit encoding --crf 0 is not lossless, only --crf -12.

[Atak_Snajpera]

Yes, you can, but the cfr switch stays there and i think it overides the qp one.
Still, since I can modify the cmd, it's not problem.

Thank you Atak!

No --QP switch in profile will override --CRF value in gui.

[MerolaC]

Got it to both.
Thank you!

[MaistroX]

Remove current ripbot264 and download again v1.22.0.

@Atak_Snajpera

I did that just now, Remux works again and then I tryed a DE Mode with 2 servers.

RipBotx264 started copying "Please wait.....copying video file to shared folder...", is that something it should do when "Move video file to shared folder (not recomended)" is NOT ticked?

See here -> https://imgur.com/a/7AHNG

Regards MaistroX

[Atak_Snajpera]

@MaistroX
Yes.

BTW. Chunk Size = 0 (one chunk per server) may take slightly less time in your case (encoding on single machine)

[MaistroX]

@MaistroX
Yes.

BTW. Chunk Size = 0 (one chunk per server) may take slightly less time in your case (encoding on single machine)

Jsut tryed that, got alot of errors, se PM with link to all info!

Regards MaistroX

[Atak_Snajpera]

@MaistroX
Forget about DE mode...

[MaistroX]

@MaistroX
Forget about DE mode...



Why, it should work right? [emoji3]

[Atak_Snajpera]

It works for others but not for you ,so it means that problem is on your side. Simple. Do not waste your time...

[MaistroX]

It works for others but not for you ,so it means that problem is on your side. Simple. Do not waste your time...



And it can't be determined by the errors given and logs, so I can solve this and get it working for me also?

Regards MaistroX

[Atak_Snajpera]

Try running Ripbot264 DE mode on virtual machine (win7 SP1 x64).

[MaistroX]

Try running Ripbot264 DE mode on virtual machine (win7 SP1 x64).

I would IF I could, had Win 7 Before I was forced by new HW to update to Win 10! :(

[Atak_Snajpera]

You do not have to activate win7. This ISO is good
https://thepiratebay.org/torrent/7220868/Windows_7_Ultimate_with_SP1_X64_Genuine_ISO_Untouched___Windows7

[MaistroX]

You do not have to activate win7. This ISO is good
https://thepiratebay.org/torrent/7220868/Windows_7_Ultimate_with_SP1_X64_Genuine_ISO_Untouched___Windows7

Activate???

And still The HardWare I have dont support Win7, that why I was forced to upgrade to Win10.
+ Torrents, that´s a no-go! :)

[slalom]

Activate???

And still The HardWare I have dont support Win7, that why I was forced to upgrade to Win10.
+ Torrents, that´s a no-go! :)
Or here
https://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/

[guest]

Activate???

And still The HardWare I have dont support Win7, that why I was forced to upgrade to Win10.
+ Torrents, that´s a no-go! :)

So what hardware are you running, that W7 doesn't support ??

Maybe you should consider trying Atak's "Windows 7 Image Updater" !!

Windows 7 SP1 x64 Professional, or Ultimate, should support most modern hardware.

[guest]

He is also using older version of AviSynth+ r2455. I have r2580.

Looks like AviSynth+ r2636, is available.

[Atak_Snajpera]

Activate???

And still The HardWare I have dont support Win7, that why I was forced to upgrade to Win10.
+ Torrents, that´s a no-go! :)

I'm shocked how easily people bought that BS.
Ryzen is FULLY supported on win7!
https://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

APU also works. You just have to re-add few entries in main GPU driver (.inf).

ThreadRipper is also working without any issues!
https://hardforum.com/threads/threadripper-and-windows-7.1947921/page-3#post-1043435113

[byteshare]

FYI, HEVC 2.7 stable was bumped from 2.7+1 to 2.7+2

[PreLimit3r]

Hi.I have a little problem with HEVC profiles.Everything works fine when I encode with default Main10 or Main8 progressive profile,but when I want to tune preset with Slow and Animation option I got an error.Can you tell me what's wrong?

[Ryushin]

I just wanted to write again about the bug that replaces a job if your editing or setting options for a newly demuxed job during the combining/muxing phase. The job that is being muxed will have it's job number and title changed to the job that is being edited. Stopping Ripbot264, editing jobs.list and manually fixing the replaced line with the correct job number and the name brings the job back after starting Ripbot264 back up.

[JASAN]

Sorry if this is the wrong place Atak and everyone else, Your program has worked very well for years, thank you for your effort in creating it.

Would you be able to recommend or create an easy to use program that would edit mp4 metadata, specifically adding the cover images to existing files?

Ripbot works for new encodings of course. But I have about 10,000 mp4s I've made that I would like to add this data to. All tv seasons so they would only need the same cover for each season. (I travel where there is no streaming for weeks at a time)

I'd pay good money for a program that can do this :-)

Thanks in advance, Have a good one.

Just in case anyone is asking how am I bringing this data around, Its easy, Run twonky on a tall Intel NUC with 2.5tb internal storage and two tiny 4tb WD drives :-). VLC on tablet/phone for playback.

[george84]

Normally RipBot 1.22.0 generates me a file job9.avs which contains a line:

video=Import("P:\photo\Scans\Edited sRGB\PhotoDirList.xml.smil.avs").ConvertToYV12(matrix="rec709")

Today there was an auto update and afterwards the generated line is:

video=Import("P:\photo\Scans\Edited sRGB\PhotoDirList.xml.smil.avs")

which causes the encode to fail.

My solution is to disable Auto Update and do a reinstall of RipBot and everything works again.

[guest]

My solution is to disable Auto Update and do a reinstall of RipBot and everything works again.

Just curious, what version / build were you running before the update than "ruined it all" ??

You mentioned 1.22.0, should be 1.22.2..with a Ripbot.exe build date of 28/03/18.

Have got avisynth up to date (in Tool's folder)

[Atak_Snajpera]

@george84
My solution is to add ConvertToYV12(matrix="rec709") to your PhotoDirList.xml.smil.avs. Problem solved.

[foxace]

Hello @Atak_Snajpera

it possible to add nvenc support ?

[Atak_Snajpera]

no .

[george84]

Just curious, what version / build were you running before the update than "ruined it all" ??


I currently run 1.22.0, downloaded from first page of this forum.

Yesterday I was running 1.21, than there was an automatic update, which caused problems.

Then I downloaded 1.22.0 and it worked again. Today in the morning everything worked, at noon there was an automatic update which caused problems.