RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Furiousflea]

Check log. You should see there what cpu extensions were used during conversion.

I do not have CPU with AVX2 extension so it looks like this
x265 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX

Thanks for that :)
Can't seem to get it to work though, "show log" by right clicking the job and then selecting it doesn't seem to work here, am on Windoiws 10 though have made sure to run as Admin.

Also, just doing a test with the standard base profiles with no modification at CRF 18 for HEVC/10bit, encoding goes fine at expected file size, but muxing produces a file that keeps on growing and never completes.

Stopped it at 720GB!
Any idea, thanks.

(Sorry should have saved the mux output command fished out of temp folder)
"C:\Video\ripbot264\tools\mkvtoolnix\mkvmerge.exe" -o "C:\Users\robo9\Desktop\1_2_video.mkv" --compression 0:none --title "1_2_video" --default-duration 0:24000/1001fps "C:\Temp\RipBot264temp\video.265"

[sneaker_ger]

Also, just doing a test with the standard base profiles with no modification at CRF 18 for HEVC/10bit, encoding goes fine at expected file size, but muxing produces a file that keeps on growing and never completes.
That's a known bug of mkvmerge 8.5.1, it is fixed in version 8.5.2.

[Furiousflea]

That's a known bug of mkvmerge 8.5.1, it is fixed in version 8.5.2.

I see, big thanks for the help. Will update mkvtoolnix etc.
Cheers :)

[essential]

Before I encode too many DVDs incorrectly (I've primarily done blurays in the past and interlaced material isn't an issue).
I'm ripping some older stuff that is interlaced. Want to make sure I'm doing this correctly.

I've been opening the VOB in DGIndex.
-------------------------------
If VOB is:
Frame Rate: 23.976024 fps
Frame Rate: Interlaced
Field Order: Top

Then in Ripbot Use:
Deinterlace: TTF -> 29.97 FPS
Decimate: Do not decimate (because the frame rate is already 23.976024?)
-------------------------------
If VOB is:
Frame Rate: Anything besides 23.976024 fps
Frame Rate: Interlaced
Field Order: Top

Then in Ripbot Use:
Deinterlace: Inverse Telecine
Decimate: Restore -> 23.976 fps
-------------------------------

Is this right?

[manono]

I've been opening the VOB in DGIndex.
-------------------------------
If VOB is:
Frame Rate: 23.976024 fps
Frame Rate: Interlaced
Field Order: Top

Then in Ripbot Use:
Deinterlace: TTF -> 29.97 FPS
Decimate: Do not decimate (because the frame rate is already 23.976024?)

Is this right?

No. The only time DGIndex will say 23.976024fps is when you have the Field Operation set for Forced Film. It has nothing to do with how the DVD has been encoded or how it should be treated. And if it shows as Interlaced, you certainly don't want the Field Operation set for Forced Film when making a D2V Project File. DGIndex is not deciding if your DVD is 23.976 or 29.97fps.

And even when setting the Field Operation as Honor Pulldown Flags and it shows as 29.97fps and Interlaced, it's still no indication of how your DVD should be handled. For that you make a basic AviSynth script, open it in VDub to check, and use your eyes to tell. And if you know enough to make an AviSynth script and use Forced Film or Honor Pulldown Flags to make a D2V Project File, or IVTC or unblend or deinterlace, then my opinion is that you should do those things in a script which you then open in RipBot.

These things are thoroughly explained in the docs included in the DGMPGDec package.

All NTSC DVDs output interlaced 29.97fps (really 59.94 fields per second).

[8ternity]

Hi Atak,

I just would like to told you Thank You very much for adding multi-languages support in Ripbot264 ! It's helped me a lot! Save time and calculations.

Also, i seen that Software has auto update when starting the app.

Thums Up ! Great Work !

8ternity

[essential]

No. The only time DGIndex will say 23.976024fps is when you have the Field Operation set for Forced Film. It has nothing to do with how the DVD has been encoded or how it should be treated. And if it shows as Interlaced, you certainly don't want the Field Operation set for Forced Film when making a D2V Project File. DGIndex is not deciding if your DVD is 23.976 or 29.97fps.

And even when setting the Field Operation as Honor Pulldown Flags and it shows as 29.97fps and Interlaced, it's still no indication of how your DVD should be handled. For that you make a basic AviSynth script, open it in VDub to check, and use your eyes to tell. And if you know enough to make an AviSynth script and use Forced Film or Honor Pulldown Flags to make a D2V Project File, or IVTC or unblend or deinterlace, then my opinion is that you should do those things in a script which you then open in RipBot.

These things are thoroughly explained in the docs included in the DGMPGDec package.

All NTSC DVDs output interlaced 29.97fps (really 59.94 fields per second).

Thanks for the response. I don't know enough to do anything with Avisynth but I'll start reading. I've been using Ripbot for years but primarily with Blurays so I've never had to deal with Interlaced sources before, I'm still very much a beginner in this regard. Ripbot makes everything else so easy ... which is why I use it to begin with.

I've read a ton on this prior to posting what you responded to, thinking I finally figured it out, there are no guides on how to specifically determine everything about your source, and then based on certain results you use these certain settings for Ripbot.

I thought I found an easily understandable guide (something that didn't assume you had advanced technical understanding to start) and based on your quote it's incorrect (thehtpc.net/htpc-tips-and-tweaks/encoding-dvds-to-h-264-mkv-using-ripbot264/).

For several of my Interlaced VOBs if I do TFF -> 29.97 or Inverse Telecine with and without decimate restore on, the resulting "preview scripts" all look the same to me. They look good but I can't have 4 different options all be the correct way to do it, and I don't know how to determine which is correct if they all look good. There is no easy guide for dealing with Ripbot and interlaced sources, but I'll keep reading.

[Atak_Snajpera]

@essential
It is quite easy.

If ripbot shows that your DVD movie has been detected as 29.97 fps then you should manually examine frames in "preview script". Ofcourse deinterlace option must be OFF!
In Media Player Classic use arrows on keyboard to skip to next frame. If you see mix of progressive and interlaced frames then you should use INVERSE TELECINE + RESTORE 23.976 option.

Normally pattern looks like this:
3 Progressive frames
2 Interlaced frames

http://i.imgur.com/UJBWMxy.png

If you see only interlaced frames then use TFF -> xx.xx fps.

[manono]

I thought I found an easily understandable guide (something that didn't assume you had advanced technical understanding to start) and based on your quote it's incorrect (thehtpc.net/htpc-tips-and-tweaks/encoding-dvds-to-h-264-mkv-using-ripbot264/).
I'll assume you're referring to this passage:
Since our video is interlaced and we are deinterlacing it, we should go ahead and decimate it to get a progressive 23.976 framerate, so choose Restore -> 23.976 FPS.
At the least it's incomplete. It's assuming all NTSC DVDs are either encoded as progressive 23.976fps with pulldown (his progressive from the previous page) or hard telecined (the pulldown encoded into the video), as in Atak_Snajpera's pictures above. But there are other possibilities. They might have been shot using interlaced video cameras and the last thing you want is to drop unique frames with an IVTC. They might be field-blended and, again, an IVTC is the wrong thing to do. They might be a mix of soft and hard telecine. They might even be progressive 29.97fps as happens sometimes (although rarely). There are just too many possibilities where, if you follow the guy's advice, you'll end up with a ruined video.

In addition, he is confusing anyone reading it by mixing up terms. There's a big difference between a full IVTC, decimating, and deinterlacing. If you have a video like that in the pictures above, what you do is IVTC, not deinterlace. And decimating is only the second step in the two-step IVTC process, the first being field-matching.

[essential]

@essential
It is quite easy.

If ripbot shows that your DVD movie has been detected as 29.97 fps then you should manually examine frames in "preview script". Ofcourse deinterlace option must be OFF!
In Media Player Classic use arrows on keyboard to skip to next frame. If you see mix of progressive and interlaced frames then you should use INVERSE TELECINE + RESTORE 23.976 option.


Thanks Atak, I will try this with several sources when I get home later. Just to clarify one thing, will there ever be a situation where you use "restore 23.976" with TFF, or is that only ever to be used with inverse telecine?

edit:
Thanks Manono, you posted while I was replying.

[Atak_Snajpera]

Just to clarify one thing, will there ever be a situation where you use "restore 23.976" with TFF,
Nope. At least I haven't had chance to use it in this way. If you aim for the best quality then you should use smart Inverse Telecine + restore than dumb forced deinterlacer + restore.
Like I said. Use Deinterlacer (TFF -> ) only if ALL frames are interlaced (no mix).

[essential]

Thanks again Atak, your instructions worked. I had stuff set up wrong but was able to determine the differences and now understand going forward.

[damia]

hai atak.. may i know how to fix this one problem??cannot load AAC audio.. thanks..
http://i.imgur.com/vDhH32B.png

[Atak_Snajpera]

yes . in cq mode chunks are always 1 min long.

[Atak_Snajpera]

More work for servers = less idle time = overall faster encoding

[ggalindo001]

Atak

Great app -- just found this last week and so far, it has worked like a champ. I especially like the simplicity of the GUI, yet it is powerful where it needs to be. I had been using handbrake previously and find this far more effective -- esp. the batch mode.

Two questions --

1. In batch mode -- is there any way to set a default for color correction to go in one of the three choices vs. the none default? Specifically, I'm wanting to set mine up to default for color correction from tv->pc. This is due to several home recorded DVDs from a DVD recorder that had a black level color bug -- this setting mostly corrects that issue in corresponding encodes.

Obviously, in batch, I can go into each corresponding entry and manually make the change prior to encode -- I was just hoping to automate that as much as possible and eliminate redundant clicks. I didn't know if there was a setting inside of one of the scripts that I could edit that would do this (vs. asking for a setting within the GUI)....

2. Probably a stupid question, but one I would throw out. Can you set up DE to operate on just one machine? I've gone through quite a bit of this thread to look for an answer to that -- it appears that you could, but not clear on how to specifically do that. Is it as simple as adding my ip address to the DE listing, with a :1000, :2000, etc. So, if my ip address is say 10.45.3.1 then I set up the server addresses starting with 10.45.3.1:1000, 10.45.3.1:2000, etc. I tried that, but I could not get the servers moving (they just remained "idle"). I'm sure I am doing something stupid wrong, and just need to tinker with it more to get it to work -- but thought I would ask that it is possible before spending too much time.

Thanks again and thanks for the great app.

g


Sent from my iPad using Tapatalk

[Atak_Snajpera]

1. In batch mode -- is there any way to set a default for color correction to go in one of the three choices vs. the none default? Specifically, I'm wanting to set mine up to default for color correction from tv->pc. This is due to several home recorded DVDs from a DVD recorder that had a black level color bug -- this setting mostly corrects that issue in corresponding encodes.
I will add this option to batch mode. Just make sure that auto-update option in ripbot264 is checked.

2. Probably a stupid question, but one I would throw out. Can you set up DE to operate on just one machine? I've gone through quite a bit of this thread to look for an answer to that -- it appears that you could, but not clear on how to specifically do that. Is it as simple as adding my ip address to the DE listing, with a :1000, :2000, etc. So, if my ip address is say 10.45.3.1 then I set up the server addresses starting with 10.45.3.1:1000, 10.45.3.1:2000, etc. I tried that, but I could not get the servers moving (they just remained "idle"). I'm sure I am doing something stupid wrong, and just need to tinker with it more to get it to work -- but thought I would ask that it is possible before spending too much time.

Of course you can ;) Instead of using real ip you can just use 127.0.0.1:2000 , 127.0.0.1:3000 and so on.

[guest]

Of course you can ;) Instead of using real ip you can just use 127.0.0.1:2000 , 127.0.0.1:3000 and so on.

I use DE on a single PC a lot, but in my situation, I just need to have the network switch/hub turned on.
I guess its because I'm using a "real" IP address.

[00-00]

Tried searching for this, but can't seem to find a definitive answer... Is there a straightforward way to add/include subtitles to all files when using batch encode, rather than having to add each file manually if subtitles are needed? Can you batch rip all or selected subtitles for each file at the same time as preparing a file? Sorry if this is obvious!

Appreciate any help!

[ggalindo001]

Atak

Thanks -- adding the color option to the batch mode would be a big time saver for me. I have it on auto update -- so look forward to the next update.

I'll see if i can get the DE to work later this week when I have time to poke around with it.

Thanks again!

g


Sent from my iPad using Tapatalk

[slalom]

I use DE on a single PC a lot, but in my situation, I just need to have the network switch/hub turned on.
I guess its because I'm using a "real" IP address.
Just set UseDistributedEncoding=1 in ripbot264.ini file
If other servers are offline, only one server wil be used

[guest]

Just set UseDistributedEncoding=1 in ripbot264.ini file
If other servers are offline, only one server will be used

Thanks slalom, I just might try that :)

Was already set as 1.............

[soneca]

Atak, could it be an up to RipBot264 remember the last folder/file previously accessed?
I think most users keep the source files in a defined path.

[Atak_Snajpera]

Atak, could it be an up to RipBot264 remember the last folder/file previously accessed?
I think most users keep the source files in a defined path.

On my win7 last used source file is remembered when I add next job.

[soneca]

On my win7 last used source file is remembered when I add next job.

Okay, but this only happens after you added the first task. Normally the folder you use for source files is not remembered.
Off topic: What lossless codec do you recommend for use as an intermediate in Sony Vegas? I have used the Lagarith but to work with 4K sources is impractical, giant files.

[Atak_Snajpera]

MagicYUV or UTVideo. Both are great.

[soneca]

MagicYUV or UTVideo. Both are great.
Thanks, I'll try.
If there were a x264 plugin to export directly from Sony Vegas would be perfect.

[Atak_Snajpera]

try frameserver debugmode plugin if you want to avoid intermediate files.

[soneca]

Debugmode Frameserver installed but I can not make it work... :confused:
You can give me a sample script to work with RipBot264?

[Atak_Snajpera]

Maybe this will help
https://www.youtube.com/watch?v=W7rJnljqvQE

[soneca]

Thank you very much for your help, I'll try. :)

[soneca]

Atk, follow the tutorial but frameserver does not start...

http://s20.postimg.org/fwmuwturx/debugmode.png

[Atak_Snajpera]

So what is ripbot encoding there?

[soneca]

The original file.
The frameserver should not show progress?

[Atak_Snajpera]

no you must load untitled.avi like I showed you in video.

[soneca]

Untitled.avi created by signpost .. What stupidity !!!
E:\Videos\Untitled.avi.

[soneca]

Now it worked! Thank you!

[Belcegor]

Hi, im new here, i have a problem with ripbot.
I´m recording gameplay videos with raptr.
These videos are in mp4 with variable framerate.

I reencoding this videos with ripbot and obtain a video with audio out of sync, searching in this forum i solve this with convertfps=true.
But now, ripbot started a few days ago to don´t open the files recorded with raptr, i don´t understand why first ripbot can open and render the files and now can´t do it.

i give you a screenshot with the error window and link to a small video file for you can try if it is problem of my installation or not.

http://s14.postimg.org/vurb033z1/Prt_Scr_capture.jpg (http://postimg.org/image/vurb033z1/)

Well, the error is displayed in spanish it tells does not recognize the media in the file.

This is the link to the file:

https://mega.nz/#!EJdWjCrA!Nyc-PgDvBxuHbClnoBC6IlOMc6UuR4AMg8d9PaW-oIM

All help are wellcome.
Thank you in advance for all.

[BlockABoots]

Atak_Snajpera, im getting audio sync issues after using RipBot to encode my file. The raw capture file is in flv format i use AvsPMod to edit the file and is saved as an .avs file, i then load this file into RipBot to encode. But when i watch back the mp4 file from RipBot the audio is out of sync which was happening in the raw capture file (.flv), this never happened on your previous versions of RipBot and think it might be the update thats causing the issue, any ideas?

[Atak_Snajpera]

AvsPMod most likely uses DirectShowSource as source filter and this is your problem. You need source filter which is frame accurate during seeking/trimming like FFMS2. Generally DirectShowSource is unpredictable. It sometimes works but most of the time it will give you a/v sync issues after trimming. RipBot264 just takes your broken .avs (wrong source filter) and sends to x264/x265 encoder.

[BlockABoots]

AvsPMod most likely uses DirectShowSource as source filter and this is your problem. You need source filter which is frame accurate during seeking/trimming like FFMS2. Generally DirectShowSource is unpredictable. It sometimes works but most of the time it will give you a/v sync issues after trimming. RipBot264 just takes your broken .avs (wrong source filter) and sends to x264/x265 encoder.

Thanks for the info, i never knew this, ill give FFMS2 a go

EDIT: Just a quick observation, i went back to RipBot 1.17.0 to see if it was an error with the newer version (which it wasnt as you stated), but what i did notice after selecting an avs file the 'Gathering Information', 'extracting frames' and 'encoding audio' process (RipBot 1.17.0) takes like 5-10 seconds but on newer versions of RipBot it does the 'demuxing' process which take a good minute to finish the process.

How come the newer releases of RipBot are slower to examine the input files that older versions??

[lemaireus]

Each time I try to re-encode a file encoded in resolutions not divisible by 4, for example 1914x808, I get a scrambled view in the 'preview script' section. The problem, however, is that even the re-encode turns out to be garbled in exactly the same way as the preview:

http://d65.imgup.net/Resolutionb6fa.jpg[/url]

The output is garbled even if I change the output resolution to resolutions divisible by 4. Is there a solution to this issue?

I get a good output on re-encoding 1914x808 to, for example, 1920x816 in Megui so I can't figure out which application in Ripbot tools prevents a good result in Ripbot and whether that problem can be rectified or not.

[Atak_Snajpera]

You should start from original Blu-ray source and not re-encode bad pirated rips.

[lemaireus]

You should start from original Blu-ray source and not re-encode bad pirated rips.

I agree, Atak, but that really is not a 'solution'. The rips of this kind that I'm talking about are iTunes releases, the most recent being their three "Pink Panther" series titles, all of which are 1914x804/808. Since Megui can re-encode these, surely there must be a way to re-encode these into 'good' rips in Ripbot as well? Looking forward to constructive suggestions... Thanks!

[Atak_Snajpera]

You will have to load your weird video file via script.
LoadPlugin("C:\...\RipBot264\Tools\AviSynth plugins\ffms\ffms2.dll")

V = FFVideoSource("C:\your_file.mp4").ConvertToRGB.Crop(1,0,-1,0)

A = FFAudioSource("C:\your_file.mp4")

AudioDub(V, A)

[lemaireus]

Thanks, Atak, for preparing the script: I'll run the script sometime tomorrow after the present batch of encodes is through and post a word on the results. However, I was wondering if it might be possible to have this 'quirky video resolution' problem as one of the areas that might be addressed in the next update? I'm sure that would help many users as there are a lot of iTunes videos floating around with 1914x... resolution.

Thanks again for the script.

[lemaireus]

I couldn't get it to work. The script, of course, must be fine, but my unfamiliarity with CLI means that the tricks I tried didn't work. I tried finding a place in the Avisynth scripts (video and audio) for the video file in which to insert the script, but couldn't figure out how or where to make the changes. So I'm back to where I started: with the RipBot GUI and the job folder, searching for a way to make the script work.

[Belcegor]

Hi, im new here, i have a problem with ripbot.
I´m recording gameplay videos with raptr.
These videos are in mp4 with variable framerate.

I reencoding this videos with ripbot and obtain a video with audio out of sync, searching in this forum i solve this with convertfps=true.
But now, ripbot started a few days ago to don´t open the files recorded with raptr, i don´t understand why first ripbot can open and render the files and now can´t do it.

i give you a screenshot with the error window and link to a small video file for you can try if it is problem of my installation or not.

http://s14.postimg.org/vurb033z1/Prt_Scr_capture.jpg (http://postimg.org/image/vurb033z1/)

Well, the error is displayed in spanish it tells does not recognize the media in the file.

This is the link to the file:

https://mega.nz/#!EJdWjCrA!Nyc-PgDvBxuHbClnoBC6IlOMc6UuR4AMg8d9PaW-oIM

All help are wellcome.
Thank you in advance for all.

Nobody can help me?
Ok, thank´s anyway.

[Shrekage]

Hi Atak,

small bug report:

If you start with the working folder in the c:\ drive, then you add a drive and change it to e:\ drive through your setting GUI, then setup some encodes, and start the encode. the share does not get changed. That really messes up the encoding client...

Thanks

[Shrekage]

Nobody can help me?
Ok, thank´s anyway.

Hi.

What troubleshooting did you try? Uninstall/reinstall ripbot? any of the tools?

Please give Atak some time and be patient...