RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[aldix]

Well, I don't know what to tell you. As you can see from the screenshot, it went on way over 10 minutes with just one "chunk" until the end.

[Tatarov]

Hello! I'm from Ukraine, so sorry for my bad English.
I needed a function DistributedEncoding and I discovered your program.
However, I did not get to use it. In standard mode (UseDistributedEncoding = 0) all is well. However, when enabled DistributedEncoding = 1 a message appears: ERROR! Source file could not be indexed! Autoclosing at 5 sec/
13640

And in log file:



C:\>"H:\Torrent\TEMPP\RipBot264v1.17.4\EncodingClient.exe" "C:\Temp\RipBot264temp\job1\job1_EncodingClient.meta"


C:\>"H:\Torrent\TEMPP\RipBot264v1.17.4\tools\mp4box\mp4box.exe" -tmp "C:\Temp\RipBot264temp" -add "C:\Temp\RipBot264temp\video.264":name="Amaranthe - Amaranthine" -fps 25 -add "C:\Temp\RipBot264temp\job1\1_audio_Undetermined.aac":lang=und:delay=0 -mpeg4 -new "C:\Users\Sasha\Desktop\Amaranthe - Amaranthine.mp4"

Cannot find file C:\Temp\RipBot264temp\video.264

Error importing C:\Temp\RipBot264temp\video.264:name=Amaranthe - Amaranthine: Requested URL is not valid or cannot be found
-------------------------

Elapsed Time: 00h:00m:07s


I tried to mp4 (H.264), avi (divX) and mpeg2 - any difference
I use Windows 8 x64, UAC - disabled, and i run RipBot264.exe as Administrator - nothing helps...

Please help me.
Sincerely, Alexander

[Atak_Snajpera]

Well, I don't know what to tell you. As you can see from the screenshot, it went on way over 10 minutes with just one "chunk" until the end.

oh I see now. I will take a look in my code.

[Atak_Snajpera]

Hello! I'm from Ukraine, so sorry for my bad English.
I needed a function DistributedEncoding and I discovered your program.
However, I did not get to use it. In standard mode (UseDistributedEncoding = 0) all is well. However, when enabled DistributedEncoding = 1 a message appears: ERROR! Source file could not be indexed! Autoclosing at 5 sec/
13640

And in log file:



C:\>"H:\Torrent\TEMPP\RipBot264v1.17.4\EncodingClient.exe" "C:\Temp\RipBot264temp\job1\job1_EncodingClient.meta"


C:\>"H:\Torrent\TEMPP\RipBot264v1.17.4\tools\mp4box\mp4box.exe" -tmp "C:\Temp\RipBot264temp" -add "C:\Temp\RipBot264temp\video.264":name="Amaranthe - Amaranthine" -fps 25 -add "C:\Temp\RipBot264temp\job1\1_audio_Undetermined.aac":lang=und:delay=0 -mpeg4 -new "C:\Users\Sasha\Desktop\Amaranthe - Amaranthine.mp4"

Cannot find file C:\Temp\RipBot264temp\video.264

Error importing C:\Temp\RipBot264temp\video.264:name=Amaranthe - Amaranthine: Requested URL is not valid or cannot be found
-------------------------

Elapsed Time: 00h:00m:07s


I tried to mp4 (H.264), avi (divX) and mpeg2 - any difference
I use Windows 8 x64, UAC - disabled, and i run RipBot264.exe as Administrator - nothing helps...

Please help me.
Sincerely, Alexander

show me content of your C:\Temp\RipBot264temp\job1\ folder

[Tatarov]

Hear is:
13641
13642
13643

And I just tried in Windows 7 x64, there all right. But i can't use Win 7, only Win 8....

[Atak_Snajpera]

is ripbot264temp shared?

see if you can access it via network path

for example //my-pc/ripbot264temp

[aldix]

oh I see now. I will take a look in my code.

I'm thoroughly amazed by your professionalism regarding all this. Not many authors would even react so fast, let alone think of looking at their code.

Your work is greatly appreciated.

Take your time. Day after tomorrow I shall be traveling anyways, so won't be able to do any two-machine encoding as it is.

For my current project that I have to finish rather fast, being able to distribute encode the whole file (complete with added script) is enough and much obliged.

We can sort out all this trim business once I return :)

Again, thanks!

[Tatarov]

No, its was not shared...
I share it manualy and probably its warck. I do mo test when back from work.
A huge thank you!

[Atak_Snajpera]

No, its was not shared...
I share it manualy and probably its warck. I do mo test when back from work.
A huge thank you!

nevertheless i'm not happy that ripbot264temp is not automatically shared on win8. Stupid m$ had to change something once again. Luckly tiles8 will never be as popular as winxp and win7.

[damia]

hai atak... why my ripbot in DistributedEncoding always not respoding... in pass1 or pass2... can u fix it??

[Atak_Snajpera]

no i can't

[damia]

no i can't

or maybe u can fix Ripbot for Audio AAC??? when i load some files with audio AAC format.. its appear error..

[damia]

atak... for new version 1.74 i always get error this.. http://i.imgur.com/dxwwFVg.jpg how to fix this ?

[Trayman]

@damia Make sure the foder is shared.

//Trayman

[8ternity]

nevertheless i'm not happy that ripbot264temp is not automatically shared on win8. Stupid m$ had to change something once again. Luckly tiles8 will never be as popular as winxp and win7.

Microsoft is always made changes that f$$ a lot of things. Over some months i look for an issue with Outlook changes that need HTML based on Strict 1.0. Tranditional 1.0 html are getting obselets and they not communicate nowhere for that change.

[damia]

@damia Make sure the foder is shared.

//Trayman

ya the folder already shared... but how to fix it?

[aldix]

I'm thoroughly amazed by your professionalism regarding all this. Not many authors would even react so fast, let alone think of looking at their code.

Your work is greatly appreciated.

Take your time. Day after tomorrow I shall be traveling anyways, so won't be able to do any two-machine encoding as it is.

For my current project that I have to finish rather fast, being able to distribute encode the whole file (complete with added script) is enough and much obliged.

We can sort out all this trim business once I return :)

Again, thanks!

Now that I'm back... have you looked at what's the problem with this #trim stuff? Thanks!

edit: Also, what's the reasoning behind forcing min-keyint 24 and keyint 240 in the encode settings? Something one has to change those but however you try,
the program forces it and my changes to the encode settings won't count. Annoying.

[hector1980]

today i Encode a file and it Encode it like this and i retry it for 4 times all was the same
Source:
http://s4.picofile.com/file/7899922903/123.png

my Encode:
http://s1.picofile.com/file/7899925585/124.png

an somtimes it gave me this error

http://s4.picofile.com/file/7899963866/125.png

Can U fix this or say me whats wrong?

[Atak_Snajpera]

Try to update ffdshow and haali media splitter

[damia]

@ Atak_Snajpera how to set file like 4.37 GB?? i don know how to set it... when finish encode i not 4.37gb.. but 4gb or 3.9gb.. what wrong?

[Atak_Snajpera]

2-pass + locks size 4480 MB

[aldix]

More stuff.

When manually entering x264 options, apparently RipBot doesn't take kindly to the "--zones" option. Wasted like 6+ hrs yesterday, because the source which I wanted to encode with particular amount of frames set with --zones option was encoded throughout with ONLY the frames set by zones. Like, I had --zones 0,2351 and whole file encoded just looped these frames over and over again.

Another thing. Not only does YLevelsS disappear every time I set it under show script or by modifying the job script directly via temp folder, there also doesn't appear any effect stuff like Tweak and/or YLevelsS are doing to the finished product. I may set them under #Color (that one at least sticks) and #Colorspace, but no effect, at all.

Other stuff I wrote previously about I got figured out. Similarly, somehow #trimmed amount of frames encoding appear to work now in distributed fashion. But don't ask me how.

[damia]

2-pass + locks size 4480 MB

ok.. thanks.. :D

[damia]

@Atak_Snajpera... why in ripbot not option audio for DTS?? or how i can encode to DTS 1506kbps.. from HDMA 5.1 or 7.1

[Atak_Snajpera]

because ac3 is more efficient

[aldix]

@Atak_Snajpera... why in ripbot not option audio for DTS?? or how i can encode to DTS 1506kbps.. from HDMA 5.1 or 7.1

audiocoder ftw, I never encode audio simultaneously.

[damia]

because ac3 is more efficient

which one good ?? AC3 640kbps??

[damia]

audiocoder ftw, I never encode audio simultaneously.

is this support to encode from bluray disck to DTS audio??

[soneca]

@Atak_Snajpera... why in ripbot not option audio for DTS?? or how i can encode to DTS 1506kbps.. from HDMA 5.1 or 7.1

Convert tracks dts-ma for dts it makes no sense.
Simply extract the core dts.

[damia]

Convert tracks dts-ma for dts it makes no sense.
Simply extract the core dts.

you mean its same quality output??

[soneca]

you mean its same quality output??

Exactly.

[aldix]

Ok, I have more problems (not that I'm surprised given how clunky scripting w/Ripbot appears to be).

This script (source was m2ts that was internally changed to mkv by Ripbot supposedly via eac3to):


#MT


#VideoSource

video=DirectShowSource("C:\Temp\RipBot264temp\job1\video.mkv",audio=false).ConvertToYV12() ## have tried FFVideosource and DGSource by setting the loadplugins explicitly and having them in the shared tools folder, same thing each time.

#Deinterlace



#Decimate



#Crop
video=Crop(video,0,140,-0,-140)


#Resize



#Colors
video=Tweak(video,hue=0,sat=1.1,bright=0,cont=1)


#Denoise
source = video
sharp0 = source.SeeSaw(nrlimit=0, nrlimit2=99, bias=61, sstr=2.75, Spower=4, Szp=13, Sdamplo=4, SdampHi=19, Slimit=99, sootheT=0, sootheS=0).mergechroma(source)
sup1 = source.fft3dfilter(sigma=2.5,sigma2=0.6,sigma3=0.9,sigma4=1.2,plane=4,bt=4,wintype=2,bw=16,bh=16).MSuper(pel=1,sharp=2)
sup2 = sharp0.MSuper(pel=1,sharp=2,levels=1)
bv1 = sup1.MAnalyse(isb=true, delta=1,overlap=8, blksize=16,truemotion=false)
fv1 = sup1.MAnalyse(isb=false,delta=1,overlap=8, blksize=16,truemotion=false)
bv2 = sup1.MAnalyse(isb=true, delta=2,overlap=8, blksize=16,truemotion=false)
fv2 = sup1.MAnalyse(isb=false,delta=2,overlap=8, blksize=16,truemotion=false)
bv3 = sup1.MAnalyse(isb=true, delta=3,overlap=8, blksize=16,truemotion=false)
fv3 = sup1.MAnalyse(isb=false,delta=3,overlap=8, blksize=16,truemotion=false)
video=source.MDegrain3(sup2,bv1,fv1,bv2,fv2,bv3,fv3,thsad=1200) ## same w/no explicit video variable setting, i.e. source. ... Curiously, the way this script originally is, w/o any "source", it wholly breaks in RipBot.

video=Temporalsoften(video,2,1,1,6,2) ## same outcome w/just Temporalsoften(2,1,1,6,2) w/o video

video=Gradfun2dbmod(video,str=0.1,strC=0.0, temp=85,adapt=64) ## enne oli temp=70 & str=0.17

#Subtitles



#AudioSource



#DownMix



#Delay



#Tempo



#Normalize



#AudioDub



#Triming
video=trim(video,5000,10000)


#AVSameLength



#ColorSpace






return video


While everything appears kosher, each time I'm trying the encode (which works in distributed fashion now, mind you), it comes out as if only 1/3 of the frames get
encoded and then the finished product just loops this data around and around.

edit: and each chunk's info file ends with "error: wrote only 2285530 of 2304000 bytes" for what's it worth.

edit#2: I might have a hunch what's happening. In the avs scripts of the individual chunk files (1,2,3 etc) there's this section of AVSameLength and whereas I supppose
there has to be a setup of AVSameLength(video,#,#) there's no "video" in my current scripts. Might that be it and if it is, how to fix it?

[damia]

2-pass + locks size 4480 MB

atak.. u suggest to me for 720p 4480 2pass lock size ... for 1080p can u sugges to me... duration movie up to 2hour and 1hour 37minutes..

[Atak_Snajpera]

atak.. u suggest to me for 720p 4480 2pass lock size ... for 1080p can u sugges to me... duration movie up to 2hour and 1hour 37minutes..

My glass ball says 8150 MB but it may be wrong. I do not know.

@aldix
To be honest I didn't design DE MODE to be used with custom made scripts. This means that when you inject your stuff I do not guarantee it will work.

[Slitheen]

which one good ?? AC3 640kbps??

Which one do you think is good, lower or higher?

[damia]

My glass ball says 8150 MB but it may be wrong. I do not know.

@aldix
To be honest I didn't design DE MODE to be used with custom made scripts. This means that when you inject your stuff I do not guarantee it will work.

ok thanks... but 1more i want ask atak... my problem why version 7.4 http://i.imgur.com/D1lAetU.jpg this??? how i can fix ?

[Atak_Snajpera]

no idea

[aldix]

Well, just wanted to say that after enough of rather sophisticated tinkering, it is possible to make manually entered scripts work with RipBot in distributed encoding mode. Of course, most of the tricks have to be deducted and best-guessed given the apparent robust (and way too clunky) nature of the program.

However, the time spent in figuring out the fine (but emphatic for the overall process) details was well worth it.

Heavy script which previously ran at 2.1fps on 2core/4threads ran at 9+ fps at combined 6core/12threads system. Amazing stuff.

Many thanks for making this kind of shared encoding possible, in that sense RipBot truly is one of a kind.

[hector1980]

today i Encode a file and it Encode it like this and i retry it for 4 times all was the same
Source:
http://s4.picofile.com/file/7899922903/123.png

my Encode:
http://s1.picofile.com/file/7899925585/124.png

an somtimes it gave me this error

http://s4.picofile.com/file/7899963866/125.png

Can U fix this or say me whats wrong?

ill do that you said and it dont work what i have to do?

[8ternity]

Hi Atak,

Had you recoded your software due to all our floating point value error? Im still get same error when it's DTS-MA audio track in the MKV file.

[rsotome]

Been having problems with the more recent x264 builds not displaying "x264 [info]" in the log file after an encode.

Usually I'll get many lines starting with x264 [info] & the most important data on a 2pass, the final ratefactor.

But since build r2356 to r2358, the only info that shows up in the log file is settings used, the mkvmerge muxing info & how long everything took.

The last x264 build to output the correct log info was r2345.

Not sure if this a RipBot264 issue, or x264 issue, due to some internal changes.

[mini-moose]

Hi

trying this tool for the first time but I can't seem to launch RipBot264.exe cause it claims I'm missing Java runtime environment. I have JRE 6 and even installed 7 now from http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html

[Atak_Snajpera]

try x86 version http://javadl.sun.com/webapps/download/AutoDL?BundleId=79063

[mini-moose]

try x86 version http://javadl.sun.com/webapps/download/AutoDL?BundleId=79063

Thanks for replying. Hmm, so you think it's cause I have Java x64 installed? I don't like installing stuff I don't really need and already have. What is java needed for anyway in ripbot? bd2up2sub ?

[slize]

Hi.

I have some troubles with red color after encoding. It's a common problem, I had the same in StaxRip while ago and adding that line:
ConvertToYV12(matrix="Rec709")
solved the problem.
Question is, I can't find the right place to add that line in RipBot. Where is it?

Thanks for your amazing work.

[aldix]

Perhaps add to the same place Ripbot usually sticks ConverttoYV12 for non-DVD encodes (rather redundant but whatchyagonnado). That is, right after the source call.

[slize]

So this is in Encoder settings - commands at the bottom?
When I add the line I can't render the clip out.
I tried that before posting here.

[Atak_Snajpera]

http://s23.postimg.org/bwjv96j5n/Untitled_1.png

[slize]

Thanks a lot, worked like a charm.
Is there any option so I could save it forever/as a default script for every single encoding?

[8ternity]

HI Atak,

Had you rebuild your ripbot264 code due to exe error on DTS-MA?

Thanks