RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[~bT~]

^ nothing to worry, iirc, its built in now.

edit: looks like you're right. sorry, my mistake :)

[BlindBandit]

It's working now

[turbojet]

Thanks for the 64 bit x264 support.

I was wondering if you ever planned on supporting x264 qpfiles to insert keyframes on the exact chapter?

It helps out with the long gop's at times when the chapter point isn't at a hard scene change.

[BlindBandit]

Credit to prettyboy85712, as he said go to Ripbot264.ini & look for //RipBot264 will check if AviSynth, FFDshow and Haali Media Spliter are installed and will also check account type
CheckRequiredSoftware=1 then it to 0 & save it. it will work now.

[juGGaKNot]

Gj as usual.

v1.13.0
Added: support for x264 64bit (up to 10% faster encoding)

If i use 64 bit OS i must download x264 64 bit and replace the x264 that is in the folder or what ?

Added: custom resize profile with locked aspect ratio
Added: language combobox for audio stream

Will check this out :)

Added: FFDshow DV decoder will be automatically enabled if necessary

Some of my friends had problems with this, good update.

Fixed: Bug which always resets VC-1 decoder to libavcodec. Default decoder is now wmv9 (Reason: Supports interlaced material)

I do not use interlaced material, will this cause problems ?

Cheers

[~bT~]

bug: unable to select lang code.
workaround: save job then hit edit for option.

[bigggt]

with Vista 64bit do i need to get the expermential NT version of FFDshow and what else do i have to do to take advantage of the 64 bit

thanks

[turbojet]

@juGGaKNot
If you download another 64 bit x264 you'd replace x264_x64.exe, x264.exe is 32 bit.
wmv9 won't cause any problems with non-interlaced content it will just be a little faster encode then libavcodec

@bigggt
ffdshow MT isn't necessary but it will speed up the encode if you have multiple cores but regular ffdshow will get the job done
for 64 bit x264 encoding all you need is 'Usex264x64=1' in RipBot264.ini and x264_x64.exe in the tools/x264 directory

[prettyboy85712]

On my pc I have the 10-1-2009,can I just use this one? Which one do you have installed Atak?
Mark

I did an encode using this version and it appears to work fine if you bypass the software check.

Overall a pretty good speed boost on my core i7. I just encoded the Duchess(Blu-ray) to BD5 in just a little over 4hrs.

[OH_NO_ITS_FRODO]

great program! definately the best compression:quality ratio i've seen for mp4!

few questions. is it possible to batch a group of files? (*.mov > *.mp4 H.264).

I am trying to batch a bunch of tutorials that I have on DVD. one of the mov files I am talking about is here (please look at #2. Creating Illustrator Documents > "Libraries and content"): Link (http://anonym.to/?http://movielibrary.lynda.com/html/modPage.asp?ID=718)

its generally very static screens, but i would love to keep the sharp quality, the only thing I've noticed is that (using the HD blueray default setting), the light grays come out pure white, bleaching out some of the lighter tones. what can I change to improve this? the only tweak i made was to the audio to 96khz from 128.

also, sometimes for the audio, i have to copy/paste in the location of the mov file for it to see the audio (as *sometimes* it is totally blank and doesn't show any mov files in the source file folder)

thanks for any help.

OT: do you guys recommend a better format for these kind of tutorial files?

not one helpful reply guys?

[turbojet]

@OH_NO_ITS_FRODO
When you mean 'batch a group of files' is that combining all files into one file?
If so and they are all the same framerate/resolution you can do that with an avisynth script (.avs) that looks like:
1=directshowsource("file1.mov")
2=directshowsource("file2.mov")
3=directshowsource("file3.mov")
1+2+3

Where file# are the files you want to 'combine' then input this into ripbot if there's audio with the clips you might have some sync issues though

If they aren't the same resolution you can add .LanczosResize(<resolution>) to each of the file lines
If they aren't the same framerate you can add .AssumeFPS(<framerate>) to each file line (this will for sure cause audio sync issues)

[OH_NO_ITS_FRODO]

hey thanks for the reply turbojet!

will keep that info handy as i often come across a file that was split into 2 parts.

with batch I mean, single separate (*.mov) files in. single separate (*.mp4) files out. but batched from a list queue using the same settings (like the way autogk works, if you're familiar with it)

I'm trying to put some of my downloads on a dvd but some are 5gb+ size ISO's (official Lynda, Noesis, Softimage, etc releases). hence trying to use the mp4 compression. I've used "Easy RealMedia Producer" in the past for the same purpose (transcoded to *.rmvb) which worked great. but looking to do the same with mp4 now.

I'm a n00bie when it comes to mp4/H.264

[nwg]

Thanks for the new version but there is a bug. It thinks I am using Vista as it asks to download a font. I don't want to.

I have a question about sup support. The log saids it won't be visible when using 720p. I have been manually muxing the 720p video and ac3 audio with a separately sup subtitle at 1080p and they are visible.

[turbojet]

Oh, nope not that I know of besides adding each to queue.

[turbojet]

Did you do anything special to get 1080p sup to show on 720p video?
This is something people have been trying to figure out for years

[juGGaKNot]

@juGGaKNot
If you download another 64 bit x264 you'd replace x264_x64.exe, x264.exe is 32 bit.
wmv9 won't cause any problems with non-interlaced content it will just be a little faster encode then libavcodec

Ah, so x264_x64 was added and it will work if you have x64 os, i see.

thnx.

[magmo]

When I try to start a BD to mkv job ripbot imidiatly tell me that the job is finished, but it is not, it does not even start. Anyone else noticed this issue?

[nwg]

I selected the english subtitle from a BD and it hasn't muxed it in the output.

I also had the same problem with it ending straight away. I think I will use carry on using version 1.12 as that works better for me.

edit.
Ignore the bit about subs. I didn't notice the new sup extension in add subtitles.

[~bT~]

When I try to start a BD to mkv job ripbot imidiatly tell me that the job is finished, but it is not, it does not even start. Anyone else noticed this issue?

it didnt happen last night but it is doing it now. remove -- nal-hrd from batch files or use an older version of x264.

[magmo]

I tryed to remove that part, but it wont start anyway....

[magmo]

Quick update.... If I use tsmuxer to create a ts file and then use that one in ripbot it works.

[laserfan]

Sometimes the COPY STREAM option for Audio is unavailable to me. I'll select the video element, and BLU-RAY DISC for output, then my .ac3 track which is usually the disc original e.g. 640Kbps 6 channel, but despite that I've selected Blu-ray as the output option RipBot won't give me COPY STREAM as an option--I'll get instead 2ch Aften in a few bitrates e.g. 192 and 256 etc.

I say "comes & goes" because sometimes it works, but sometimes it doesn't. Has anyone else seen this? It's as if MediaInfo is mis-reading my .ac3 track somehow. If I choose MKV output I get the COPY STREAM option, but not when I click BLU-RAY. :confused:

BTW it has happened both with the latest 1.13 but also the previous 1.12. Heck now I went back to 1.11.5 and old 29-March Haali and still see the problem...

[stinman]

I did an encode using this version and it appears to work fine if you bypass the software check.

Overall a pretty good speed boost on my core i7. I just encoded the Duchess(Blu-ray) to BD5 in just a little over 4hrs.

So I guess I should update and leave the 10-1-2009 there.I have a phenom 9600 processor at 2.3ghz.I did a Blu-ray rip that was already cut down to 19.8Gbs (Max Payne).It did the video in about 1.5 hour maybe,but I stopped it before the audio was done.It kept my processors at 100% all the time.I don't have any special coolers or extra fans.I am new to ripbot264.I have just been doing the anydvdhd and tsremux thing along with imgburn for iso and Powerdvd 8 to play.I got almost 2 Tbs in hard drive full of dvd's and Blu-rays.Runnin out of room again!Where does it end :) Thanks for your help!If you know about this program well,I would love to learn lots more and seek some guidance from you if you got time.
Do I need to uninstall the older version of ripbot264 first before installing the new one,or can I just install and it will update the files it needs to?

Mark

[prettyboy85712]

So I guess I should update and leave the 10-1-2009 there.I have a phenom 9600 processor at 2.3ghz.I did a Blu-ray rip that was already cut down to 19.8Gbs (Max Payne).It did the video in about 1.5 hour maybe,but I stopped it before the audio was done.It kept my processors at 100% all the time.I don't have any special coolers or extra fans.I am new to ripbot264.I have just been doing the anydvdhd and tsremux thing along with imgburn for iso and Powerdvd 8 to play.I got almost 2 Tbs in hard drive full of dvd's and Blu-rays.Runnin out of room again!Where does it end :) Thanks for your help!If you know about this program well,I would love to learn lots more and seek some guidance from you if you got time.
Do I need to uninstall the older version of ripbot264 first before installing the new one,or can I just install and it will update the files it needs to?

Mark

Yes, uninstall the old version if you used the installer . If not, just run the new version from a different folder.

[juGGaKNot]

A small notice :

StoreTempFilesin=AUTO does not work on my pc

had to change it to StoreTempFilesin=D:\ for the encode to work

LE : After changing to StoreTempFilesin=D:\ now StoreTempFilesin=AUTO works.

[astragalos]

When I try to start a BD to mkv job ripbot imidiatly tell me that the job is finished, but it is not, it does not even start. Anyone else noticed this issue?

It happens the same to me when I try to recode a captured .ts file into mkv it runs well if I don't touch anything but if I want to deinterlace and/or resize or realocate the final mkv it quickly says that the job is finished.

I hope it will help to resolve the problem.

Greetings :thanks:

[astragalos]

it didnt happen last night but it is doing it now. remove -- nal-hrd from batch files or use an older version of x264.

It seems to work by removing --nal-hrd

Thank you very much ! :thanks:

[bigggt]

@juGGaKNot
If you download another 64 bit x264 you'd replace x264_x64.exe, x264.exe is 32 bit.
wmv9 won't cause any problems with non-interlaced content it will just be a little faster encode then libavcodec

@bigggt
ffdshow MT isn't necessary but it will speed up the encode if you have multiple cores but regular ffdshow will get the job done
for 64 bit x264 encoding all you need is 'Usex264x64=1' in RipBot264.ini and x264_x64.exe in the tools/x264 directory

thanks Turbo

[BlindBandit]

Just wow, i just use RipBot264 1.13.0 in Vista 64bit & boy x264 64bit kick ass, Bleach avi was 170mb then after using RipBot264 Bleach is now 165mb at the same IQ wow.

[Atak_Snajpera]

bug: unable to select lang code.
workaround: save job then hit edit for option.
More info please. Step by Step


Sometimes the COPY STREAM option for Audio is unavailable to me. I'll select the video element, and BLU-RAY DISC for output, then my .ac3 track which is usually the disc original e.g. 640Mbps 6 channel, but despite that I've selected Blu-ray as the output option RipBot won't give me COPY STREAM as an option--I'll get instead 2ch Aften in a few bitrates e.g. 192 and 256 etc.
Screenshot please.

Thanks for the new version but there is a bug. It thinks I am using Vista as it asks to download a font. I don't want to.
Windows XP DOES NOT HAVE "Consolas.ttf" font therefore it must be installed !!! Windows Vista and Windows 7 have this font installed by default !!!!

[~bT~]

add video source
add audio source
select mkv
select bluray profile
select 2 pass and lock size 8150
unable to choose lang code for audio
save job
hit edit
able to change lang code :)

[brogan]

I have Windows 7 64-bit (i920 Quad Core & 6 GB of Ram) & I can't seem to install the new version...I've had 1.12.0 working w/no problems but wanted to give 1.13.0 a whirl...no dice :(
Once I ran the RipBot.exe, I got a message saying the ffdshow & haali needed to be updated...I uninstalled both & then reinstalled the newer versions but every time I try to install RipBot, I get the message that these 2 programs are not installed...help!!

[Fishman0919]

Did you install this http://haali.cs.msu.ru/mkv/
YOU MUST HAVE LATEST HAALI MEDIA SPLITTER
11/01/2009

C:\Program Files\Haali\MatroskaSplitter\splitter.ax must not be older than 10-01-‎2009 ‏‎22:17:14

http://img3.imageshack.us/img3/52/new1ah6.th.png (http://img3.imageshack.us/my.php?image=new1ah6.png)

Getting the not installed error... LINK (http://i467.photobucket.com/albums/rr37/fishman0919/splitterax.png)

[brogan]

Was able to get ffdshow correctly updated but Haali is still not working correctly...have the 2009-11-01 version installed but RipBot says its still not installed...

[brogan]

Getting the not installed error... LINK (http://i467.photobucket.com/albums/rr37/fishman0919/splitterax.png)

Thanks for the reply, that's the one I downloaded/installed & it just doesn't show as being installed...I've uninstalled it, ran CCleaner, restarted, re-installed the correct version, restarted then ran RipBot but it keeps coming up as Haali not installed...I double checked that file (splitter.ax) & I have the correct version installed...this is driving me nuts...if anyone has any ideas, please let me know

:thanks::thanks::thanks::thanks::thanks::thanks::thanks:

[prettyboy85712]

I have Windows 7 64-bit (i920 Quad Core & 6 GB of Ram) & I can't seem to install the new version...I've had 1.12.0 working w/no problems but wanted to give 1.13.0 a whirl...no dice :(
Once I ran the RipBot.exe, I got a message saying the ffdshow & haali needed to be updated...I uninstalled both & then reinstalled the newer versions but every time I try to install RipBot, I get the message that these 2 programs are not installed...help!!
You can edit the ripbot ini to bypass the software check.

[brogan]

You can edit the ripbot ini to bypass the software check.

I just went back , saw your posts, edited .ini & was coming back to give you a shout...thanks, prettyboy :)

[nwg]

Now you have a BD 25 size possible. It would be great to be able to keep the HD audio as well. In fact, the sound of copy stream make it sound like it should be copying the audio as is regardless of what audio it is.

[survivant001]

I installed ffdshow 2653 64 bits and ripbot 1.13.0 doesn't see it
http://downloads.sourceforge.net/ffdshow-tryout/ffdshow_rev2653_20090204_clsid_x64.exe?modtime=1233773214&big_mirror=0

and I installed the splitter from http://haali.net/mkv/MatroskaSplitter.exe

and ripbot still doesn't see it.

can you post the link of the software that we need to install please.

thanks

[8ternity]

@Atak_Snajpera:

Here the trouble i have, no answer from my other post.

Snapshot 01; Original Video is MKV 23FPS, audio AC3 is correct
VIDEO 2:40:44.087 --- AUDIO 2:34:11.584

http://i480.photobucket.com/albums/rr165/8ternity/Other/th_01-Snapshot-Original.jpg (http://s480.photobucket.com/albums/rr165/8ternity/Other/?action=view&current=01-Snapshot-Original.jpg)

Snapshot 02; Update to 23.97FPS, audio sync time error;
VIDEO 2:34:11.502 --- AUDIO 2:27:54.976

http://i480.photobucket.com/albums/rr165/8ternity/Other/th_02-Snapshot-2397fps.jpg (http://s480.photobucket.com/albums/rr165/8ternity/Other/?action=view&current=02-Snapshot-2397fps.jpg)

Video and Sound Out of sync when convert to 23.97. normally in 1.12.0 version and previous, can set "CUT" or "STRETCH" but not no fonction available.

Can you help with that please?

Thank you!

[8ternity]

I installed ffdshow 2653 64 bits and ripbot 1.13.0 doesn't see it
http://downloads.sourceforge.net/ffdshow-tryout/ffdshow_rev2653_20090204_clsid_x64.exe?modtime=1233773214&big_mirror=0

and I installed the splitter from http://haali.net/mkv/MatroskaSplitter.exe

and ripbot still doesn't see it.

can you post the link of the software that we need to install please.

thanks

You can resolved problem by modifiying the ripbot.ini file with notepad.exe;

Change ;
CheckRequiredSoftware=1
to
CheckRequiredSoftware=0

And software will work.

[jamd1]

Quote:
Sometimes the COPY STREAM option for Audio is unavailable to me. I'll select the video element, and BLU-RAY DISC for output, then my .ac3 track which is usually the disc original e.g. 640Mbps 6 channel, but despite that I've selected Blu-ray as the output option RipBot won't give me COPY STREAM as an option--I'll get instead 2ch Aften in a few bitrates e.g. 192 and 256 etc.

I have this problem too - No audio file is seen in the audio box - but you can browse to it and then Xcopy will appear.
Also many saved preferences ( saved in RipBot264.ini ) do not show - such as profile, desired bitrate and output path. This is using XP pro SP3. Seems like this version has many incomptiblities with Xp - will stick with 1.12.0 until fixed).

[wolfbane5]

Thanks for v1.13.0, Atak. I made a few changes in the .ini to suit my needs better, but I've been wondering if there's a way I can add a few other output file sizes to the file size list, simply for convenience purposes?

[Atak_Snajpera]

@survivant001
does this key exists?
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\GNU\ffdshow
Revision value must exists and must be higher than 2633

[survivant001]

the revision is 2605... wierd.. look like the guy forgot to change it when he build it.

I'll swtich to 32bit

[illicit33]

I encode 24fps, play with PS3 but frame-skipping every 2-5minute, but normal on the computer, I do not know why, please help
Thank you

[Fishman0919]

After shutting off the ver Check to get passed the Haali Media Splitter issue... got a font install for Vista and Windows 7 with a reboot. I'm running Win XP

Now after choosing the file to encode, I get this error. LINK (http://i467.photobucket.com/albums/rr37/fishman0919/errornobmp.png)

[survivant001]

After shutting off the ver Check to get passed the Haali Media Splitter issue...


so no one figure out how to install the right version ?

[spida_singh]

I selected the english subtitle from a BD and it hasn't muxed it in the output.

I also had the same problem with it ending straight away. I think I will use carry on using version 1.12 as that works better for me.

edit.
Ignore the bit about subs. I didn't notice the new sup extension in add subtitles.

I get the same error, Dark Knight Blu ray, i made a sample using tsmuxer, using ac3 audio, Vista 32bit, q6600, it also told me haali was not installed, to fix, downloaded haali from

http://www.free-codecs.com/download/Haali_Matroska_Splitter.htm

then it told me it had it installed, even though the details on version was exactly the same.

[spida_singh]

It seems to work by removing --nal-hrd

Thank you very much ! :thanks:

Where do you remove this?

::EDIT::

Found it, thanks, now running ok.