RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[asarian]

just open any .m2ts directly from BD in ripbot (make sure that AnyDVD HD is running in background)
Which brings me back to a question which I believe has been asked many times (and probably been equally ignored, lol); but why does Ripbot always insist on remuxing the entire input file to a mkv? x264 doesn't need it (it will just take whatever DirectShowSource or FFVideoSource is willing to parse via AviSynth). So, why not make it optional to allow direct usage of the input file people specify? (like an m2ts elsewhere on disk). Would save so much excess disk-thrashing!

[Atak_Snajpera]

Movies are often divided in multiple .m2ts files. eac3to is able to find correct order and merge them in one easy to encode .mkv. So as you can see it is faster to just select .m2ts directly.

[asarian]

Movies are often divided in multiple .m2ts files. eac3to is able to find correct order and merge them in one easy to encode .mkv. So as you can see it is faster to just select .m2ts directly.
That actually makes good sense. :)

[soneca]

Hi Atak,

I also have the same problem with videos produced by Canon cameras, the problem is that stupid audio track.
Including multiAVCHD also did not accept but the Dean has a fix that.

I suppose it's the same problem encountered by digib ...

General
Complete name : D:\MVI_1514.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 69.2 MiB
Duration : 24s 33ms
Overall bit rate : 24.2 Mbps
Encoded date : UTC 2010-04-19 14:58:03
Tagged date : UTC 2010-04-19 14:58:03

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Baseline@L4.1
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 24s 33ms
Bit rate mode : Variable
Bit rate : 23.5 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 30.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.848
Stream size : 67.2 MiB (97%)
Language : English
Encoded date : UTC 2010-04-19 14:58:03
Tagged date : UTC 2010-04-19 14:58:03
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M

Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 24s 33ms
Bit rate mode : Constant
Bit rate : 705.6 Kbps
Channel(s) : 1 channel
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Stream size : 2.02 MiB (3%)
Language : English
Encoded date : UTC 2010-04-19 14:58:03
Tagged date : UTC 2010-04-19 14:58:03

[Atak_Snajpera]

So I assume that you don't want me check that... ( no sample )

[digib]

Full mediainfo report

General
Complete name : F:\MVI_9880.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 182 MiB
Duration : 1mn 36s
Overall bit rate : 15.8 Mbps
Mastered date : Sat May 22 13:33:19 2010
Writing application : CanonMVI06

Video
ID : 0
Format : M-JPEG
Codec ID : MJPG
Duration : 1mn 36s
Bit rate : 15.1 Mbps
Width : 640 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate : 30.000 fps
Resolution : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 1.634
Stream size : 174 MiB (95%)

Audio
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Unsigned
Codec ID : 1
Codec ID/Hint : Microsoft
Duration : 1mn 36s
Bit rate mode : Constant
Bit rate : 705.6 Kbps
Channel(s) : 1 channel
Sampling rate : 44.1 KHz
Resolution : 16 bits
Stream size : 8.14 MiB (4%)
Interleave, duration : 998 ms (29.94 video frames)
Interleave, preload duration : 1000 ms

[snippits]

Need some help with black lead in.

I have a DVD(purchased recently) main movie rip of Twilight Saga New Moon. I used StaxRip to do an Xvid backup of the movie and found out the audio was way out of sync. Black lead in was causing it to be out of sync. I used DGIndex to demux the audio and saved the corrected audio and .d2v file, and then I copied and replaced the audio and .d2v file in the StaxRip temp folder. A/V were in sync, and the movie played good.

Tried to do the same thing with RipBot by copying and replacing the corrected audio and .d2v file, but I can't get it to work. When I use the preview script function within RipBot, all I see I is a reddish looking bunch of junk lol.

How can I make it work? Thanks for the help!

[Atak_Snajpera]

@soneca
http://img641.imageshack.us/img641/3708/14604000.png

@snippits
Did you try to select .vob in ripbot264 instead of .d2v?

[Guest]

He needs to start his project in by a few GOPs. Will RipBot let him do that?

[soneca]

Atak,
Never could open this file in RipBot ...:confused:
Gives me this message:

http://i131.photobucket.com/albums/p305/soneca1/Forum/erro.png

[Atak_Snajpera]

Try this if your system is 64bit
http://www.mediafire.com/file/zyzifmlzwty/Register_EXT_MOV_x64.reg
else
http://www.mediafire.com/file/wmyzyvin2my/Register_EXT_MOV_x86.reg

[soneca]

It worked on Windows 7 64-bit!!!:)
Thank you very much!:thanks:

[god_md5]

Try this if your system is 64bit
http://www.mediafire.com/file/zyzifmlzwty/Register_EXT_MOV_x64.reg
else
http://www.mediafire.com/file/wmyzyvin2my/Register_EXT_MOV_x86.reg

i open the ts file have same error,i use window7 x64

[Mr. Monte]

Atak,

I am currently encoding for my new iPad. A couple of the programs/GUI's I have allow me to boost audio volume while converting the DTS/AC3 to LC AAC. I see the normalize drop-down you have (100% or 200%).

Question..is that a true normalize in the sense that it is a compressor...or is it a audio boost setting that just increases volume, keeping same dynamic range?
If so, 100% would be no boost?...Also, user can not adjust those values from your two presets.

Could a volume boost feature be implemented?

Thanks

[snippits]

@snippits
Did you try to select .vob in ripbot264 instead of .d2v?

Hi,

I just processed all the vobs with RipBot normally, and then I directly used DGIndex to fix the the black lead in, and then took the DGIndex saved audio and .d2v file and copy and replaced what was in the RipBot temp folder. And yes I did follow the RipBot file naming such as job1.d2v. Doing the above worked with StaxRip doing an Xvid encode.

@neuron

Yes, I was skipping GOPS. And it worked wonderfully. Thanks! I don't even know what GOPS is lol. I just followed the directions for the fix when I was notified by the popup about the audio being abnormal(662752ms). And then after the fix the audio was -243ms which solved my A/V sync problem using StaxRip for the Xvid encode.

I am new at encoding, so hopefully I provided enough information. Thanks for all the help!

[8ternity]

Atak,
Never could open this file in RipBot ...:confused:
Gives me this message:

http://i131.photobucket.com/albums/p305/soneca1/Forum/erro.png

I just saw that your windows look like in other language of English? Did your windows language is different then English?

[Atak_Snajpera]

@Mr. Monte
Normalize 100% increases volume to safe maximum volume (dynamic range is preserved). Everything above is not recommended because it causes distortion in sound. 200% was only added for PSP users because internal speakers are very weak.

i open the ts file have same error,i use window7 x64
new version will check and force Haali media splitter for supported extensions (.ts .mts .m2ts .mp4 .mov and so on)

[soneca]

I just saw that your windows look like in other language of English? Did your windows language is different then English?

That's right, Portuguese.

new version will check and force Haali media splitter for supported extensions (.ts .mts .m2ts .mp4 .mov and so on)

Very good, thanks.:)

[Trayman]

Hey Atak!

Would appriciate support for ÅÄÖ and dots in the output file name.
I wrote about this issue a while back but since i didn't get a heads up on the issue so i bump it.

Another issue that has come up is that some bluray's dont have a language speciefied for the subs (Two so far of 37 ripped bluray's) it would be great if there where a preview option available so you don't need a third party app for checking the language of the sub.

Other than that i'm happy with this great gui the only thing that would be more awesome is a copy of the source code but i understand why you keep that to yourself :)

Cheers Trayman

[Mr. Monte]

@Mr. Monte
Normalize 100% increases volume to safe maximum volume (dynamic range is preserved). Everything above is not recommended because it causes distortion in sound.

Thanks...BTW, you need to add iPad to your signature line now also :)

[god_md5]

maybe the mkvtool 4.0 have AspectRatio error?
i crop the video to 4:3,but output is 16:9
Resize=SD-PAL 720x576 [1,33:1]


[JobSettings]
VideoFile=F:\tv\2009 Mnet Asian Music Awards\PART1.TS.12.TS
VideoCodec=h264
VideoWidth=720
VideoHeight=576
VideoAspectRatio=16:9
VideoProfile=[HIGH 4.0] HD . BluRay . Consoles
SourceFPS=25
MovieFPS=25
FPSinGUI=25
SourceNumberOfFrames=146965
SourceMovieLength=5878.6
CurrentMovieLength=5878.6
SourceAudioLength=5878.72
Frames=146965
Duration=1:37:58.6
Mode=2-Pass
kbps=2048
AudioFile=E:\temp\RipBot264temp\job1\2_audio_Undetermined.ac3
AudioFileSize=141089280
AudioCodec=ac3
AudioBPS=192000
AudioProfile=2.0 OGG Vorbis ~128 kbps [q 4]
Frequency=48000
Channels=2
DurationAudio=1:37:58.72
AudioLength=5878.72
Normalize=100%
AudioDelay=0
AudioLang=Undetermined [und]
Output=C:\Users\godmd5\Desktop\PART1 TS 12.mkv
Container=mkv
LockSize=0
Size=1524
Deinterlace=TFF -> 25 FPS
Crop=Manually
CropTop=2
CropBottom=0
CropLeft=100
CropRight=100
Resize=SD-PAL 720x576 [1,33:1]
ResX=720
ResY=576
Decimate=Do not decimate
Colors=Use TV -> PC conversion
hue=0
sat=1
bright=0
cont=1
subtitles=Do not use subtitles
subtitleFileSize=0
path=
Denoise=Do not denoise
AssumeFPS=Do not change

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Muxing mode : Container profile=Unknown@4.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 1h 37mn
Bit rate : 2 048 Kbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.198
Stream size : 1.36 GiB (92%)
Writing library : x264 core 98 r1649 20cbe10
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=1 / bitrate=2048 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=25000 / vbv_bufsize=25000 / ip_ratio=1.40 / aq=1:1.00 / nal_hrd=vbr

[laserfan]

He needs to start his project in by a few GOPs. Will RipBot let him do that?If this means opening an Avisynth script, then yes, it will.

[Atak_Snajpera]

@god_md5
send me 50mb sample (source .ts) to www.mediafire.com. Use DGSplit.

[digib]

sorry to retry but... should I give up with my issue?

[Atak_Snajpera]

try to edit ripbot264.ini
StoreTempFilesin=AUTO

change to

StoreTempFilesin=C

[snippits]

This post is in reference to my my first post(#8107) about black lead in.

Preliminary results suggests that I finally got the A/V sync issue caused by black lead in fixed. A/V sync looks good now when using the RipBot preview script.

Here is what I did. I used Ripbot normally to process the vobs. Then I used DGIndex to skip GOPS and fix the black lead in. Saved the .d2v file and then renamed it to job1.d2v, and then copied and replaced to the RipBot temp folder. Did not edit any AVISynth scripts.

I have the video encoding now. Don't know what is going to happen when the streams get remuxed. Fingers crossed!

Edit: Did not work. Audio is way out of sync. I am guessing that I will have to edit an AviSynth script to get it to work with RipBot, but I don't know how to do it. Simple copy and replace will not work using DGIndex to skip GOPS, and then use the demuxed audio and .d2v file.

[benjyv]

Can I open here a topic related to sound ?? ...apparently can :) :D ;-)
I heard that for encoding LPCM to DTS I need DTS-HD Master Audio Suite Encoder and for splitting LPCM tracks I can use Nuendo soft...
Things are simply ,apparently ,but I need a professional , a person who realy uses these softs , to help me with few lil tricks... ;-)
Many thanks for contacting me !!!!

[Atak_Snajpera]

@snippits
Did you check audio sync in preview? You can also adjust audio delay manually in RipBot264.

[soneca]

benjyv,

It would be easier to get help if you post your question here > http://forum.doom9.org/forumdisplay.php?f=11

[snippits]

@snippits
Did you check audio sync in preview? You can also adjust audio delay manually in RipBot264.

Yes I tried to adjust the audio delay manually in RipBot to -250ms. Still way out of sync because of the black lead in.

Success finally! Here is all the steps I had to do the get the black lead in to work. I do have a headache lol.

1. Processed the vobs with RipBot normally, and set a manual crop, custom resize, chose .mkv file container, and the audio was copy stream.

2. Clicked Done. And it was in que but not started yet.

3. Used DGIndex to make project and saved the audio and .d2v file and renamed to job1. GOPS were skipped.

4. Copied and replaced the job1.d2v in the RipBot temp folder. Then I just copied over the other job1 audio file. I had both of the ac3 audio streams in the RipBot temp folder. Difference between the audio streams were: One had a delay of 662752 and the other had -243ms delay. The -243ms stream was the one that was GOPS corrected with DGIndex.

5. Edited job1 AviSynth script. Deleted the delay of 662752 and replaced with -243 and then saved it. That was the only change.

6. Edited job1 Configuration Settings. Same change as #5 above.

7. Edited job1_MuxFiles batch. Same change as #5 and #6.

8. Closed the temp folder, and clicked start to encode the video. Finally, A/V was in sync.

I wish it were possible to make it easier, but that's the only way I got it to work.

[god_md5]

@god_md5
send me 50mb sample (source .ts) to www.mediafire.com. Use DGSplit.
the file is a h264 ts 576i50 (20:11)file <-i think it is 16:9
i Crop(92,2,540,574)
then resize to 720x576 ([1,33:1])
the output is 720x576 (16:9)
mediainfo show is
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
http://www.mediafire.com/download.php?cgzu4udgwna

[Atak_Snajpera]

@god_md5
did you understand me?

[snippits]

did you understand me?

Not sure if you are talking to me:D

Yes I think I did understand you to the best of my knowledge, but I need to add something else.

When I used the preview script within RipBot the A/V were in sync. But what I think is happening is that once it is loaded to que the original processed ac3 audio stream is being used in the job1 AviSyth script, configuration settings, and the job1_ MuxFiles batch which is normal. That's the reason I had to do the edits.

Hopefully, I have provided enough of information.

[bigggt]

Man i can't figure out my subtitle problem

I had as issue with Avatar and now 2012 , do i need to install anything else other then ripbot to get the subtitles to burn in.

I select build in picture and then select the subtitle in the temp folder but it never seems to work for me.

i have java so that is not an issue

[davidsama]

Try extracting out the subtitle with mkvextract gui 2 into another folder and select it that way.

[brogan]

Hello,

Strange thing just starting happening when using RipBot v1.16.1. Have encoded hundreds of movies w/out too many issues. After getting updates for Windows 7 x64 Ultimate the other day & restarting, I immediately get an error once a job is loaded & I hit the Start button. I immediately get: avs2yuv.exe has stopped working
I rolled back the updates & restarted but I'm still get that error. I went back to try files that I already encoded w/out a problem & I still get the error. I tried older versions of RipBot & still get the error. Just wanted to see if this has happened to anyone else & to try to figure out where the problem is so I can correct it. I love this program & not being able to use this for 24 hours is really annoying :mad:

[Atak_Snajpera]

Why don't you show us what Windows 7 is giving you in Crash window!?!

http://forum.doom9.org/showthread.php?p=1408139#post1408139

[brogan]

Why don't you show us what Windows 7 is giving you in Crash window!?!

http://forum.doom9.org/showthread.php?p=1408139#post1408139


Good idea. Here it is attached. I was using Profile 4.0, AVCHD, 1920x1080 resolution, DTS audio, 2-pass, 8150 MB...

[pacaveli211]

did you put a screen shot into a .doc file?
just upload a photo...

[brogan]

did you put a screen shot into a .doc file?
just upload a photo...

It's there, it's a screen shot saved into a word doc...are you having trouble opening it?

[pacaveli211]

I know it's there
"Attachments Pending Approval" (which means it can't be opened until it's approved)
I just don't understand why you'd put it in a word doc
photo attachments may not require approval....or microsoft office
but you'd just want to upload to an image hosting site anyways

[Atak_Snajpera]

It's there, it's a screen shot saved into a word doc...are you having trouble opening it?
it would be even better if you compressed that .doc to rar with password and split file in 100 pieces...

[Mr. Monte]

@Mr. Monte
Normalize 100% increases volume to safe maximum volume (dynamic range is preserved). Everything above is not recommended because it causes distortion in sound. 200% was only added for PSP users because internal speakers are very weak.


new version will check and force Haali media splitter for supported extensions (.ts .mts .m2ts .mp4 .mov and so on)

Atak,

I re-encoded a movie last night using the 100% option. It still too low for my likening. I compared it to another encode of the same movie I did with the latest [spam]. It has by default the AAC audio encode set to 125%.

Would you mind considering allowing th euser of your GUI to be able to adjust the audio boost level? (rename it from normalize to audio boost)

TIA :thanks:

[rendez2k]

OK, just installed RB on my new Win 7 64bit machine. When I add an MKV and the streams are demuxed, the correct length and frames are reported. Whem the encode starts, only the first 7000 or so frames are encoded. I've tried 2 or 3 MKVs with the same results. Any ideas?!



G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\bepipe\bepipe.exe" --script "import(^G:\temp\RipBot264temp\job1\job1.avs^)" | "C:\Program Files (x86)\RipBot264v1.16.1\Tools\enc_aacPlus\enc_aacPlus.exe" - "G:\temp\RipBot264temp\audio.aac" --lc --br 327680 --mpeg4aac

***************************************

BePipe by dimzon

***************************************

Script used:

# BEGIN

import("G:\temp\RipBot264temp\job1\job1.avs")

# END





Scanning for Audio Stream...

Found Audio Stream

Channels=6, BitsPerSample=16, SampleRate=48000Hz

Writing Header...

Writing Data...

0%
Done!



********************************************************************

* AACPlus v2 Encoder (using Winamp enc_aacplus.dll and nscrt.dll)

* Coding Technologies encoder 8.0.3

* Build Oct 10 2009, 16:03:17

********************************************************************



Input file: -

Output file: G:\temp\RipBot264temp\audio.aac

SampleRate: 48000

ChannelCount: 6

BitsPerSample: 16

Bitrate: 320000

ChannelMode: Multichannel

Engine: LC-AAC

Tune For Speech: No

PNS: No

MP4 Output: No

Encoding...
Finalizing...
Done


G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot264v1.16.1\tools\x264\x264_x64.exe" --pass 1 --bitrate 235932 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 6938 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

y4m [info]: 1920x1080p 1:1 @ 10000000/417083 fps (cfr)

x264 [warning]: max bitrate less than average bitrate, assuming CBR

x264 [info]: using SAR=1/1

x264 [warning]: VBV bitrate (235932) > level limit (20000)

x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2

x264 [info]: profile Main, level 4.0
G:\temp\RipBot264temp\job1\job1.avs: 1920x1080, 10000000/417083 fps, 6938 frames

x264 [info]: frame I:78 Avg QP:10.25 size:420331

x264 [info]: frame P:4114 Avg QP:10.33 size:402686

x264 [info]: frame B:2746 Avg QP:10.72 size:275529

x264 [info]: consecutive B-frames: 31.8% 41.0% 10.5% 16.7%

x264 [info]: mb I I16..4: 41.5% 0.0% 58.5%

x264 [info]: mb P I16..4: 44.2% 0.0% 0.0% P16..4: 26.1% 0.0% 0.0% 0.0% 0.0% skip:29.8%

x264 [info]: mb B I16..4: 13.6% 0.0% 0.0% B16..8: 39.6% 0.0% 0.0% direct:11.4% skip:35.4% L0:20.6% L1:22.2% BI:57.2%

x264 [info]: coded y,uvDC,uvAC intra: 92.4% 85.5% 74.9% inter: 46.8% 38.8% 24.3%

x264 [info]: i16 v,h,dc,p: 11% 8% 57% 24%

x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 16% 23% 5% 13% 6% 8% 6% 10%

x264 [info]: i8c dc,h,v,p: 56% 20% 15% 9%

x264 [info]: Weighted P-Frames: Y:0.8%

x264 [info]: kb/s:67623.28



encoded 6938 frames, 40.10 fps, 67623.28 kb/s


G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot264v1.16.1\tools\x264\x264_x64.exe" --pass 2 --bitrate 235932 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 6938 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

y4m [info]: 1920x1080p 1:1 @ 10000000/417083 fps (cfr)

x264 [warning]: max bitrate less than average bitrate, assuming CBR

x264 [info]: using SAR=1/1

x264 [warning]: VBV bitrate (235932) > level limit (25000)

x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2

x264 [warning]: target: 235932.00 kbit/s, expected: 67628.47 kbit/s, avg QP: 10.0000

x264 [warning]: try reducing target bitrate or reducing qp_min (currently 10)

x264 [info]: profile High, level 4.0
G:\temp\RipBot264temp\job1\job1.avs: 1920x1080, 10000000/417083 fps, 6938 frames

x264 [info]: frame I:78 Avg QP:10.26 size:360239

x264 [info]: frame P:4114 Avg QP:10.34 size:362305

x264 [info]: frame B:2746 Avg QP:10.67 size:251862

x264 [info]: consecutive B-frames: 31.8% 41.0% 10.5% 16.7%

x264 [info]: mb I I16..4: 29.7% 56.7% 13.6%

x264 [info]: mb P I16..4: 4.3% 34.5% 9.0% P16..4: 10.0% 8.0% 2.9% 0.7% 0.5% skip:30.0%

x264 [info]: mb B I16..4: 0.9% 8.3% 4.4% B16..8: 21.3% 13.7% 7.6% direct: 7.1% skip:36.6% L0:37.9% L1:29.6% BI:32.6%

x264 [info]: 8x8 transform intra:70.0% inter:46.0%

x264 [info]: coded y,uvDC,uvAC intra: 93.6% 89.7% 81.2% inter: 40.1% 35.5% 22.6%

x264 [info]: i16 v,h,dc,p: 31% 10% 30% 28%

x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 8% 10% 39% 7% 8% 7% 8% 7% 8%

x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 14% 22% 9% 10% 8% 9% 8% 10%

x264 [info]: i8c dc,h,v,p: 54% 20% 15% 10%

x264 [info]: Weighted P-Frames: Y:0.8%

x264 [info]: ref P L0: 58.0% 13.1% 20.7% 8.2% 0.1%

x264 [info]: ref B L0: 83.0% 17.0%

x264 [info]: kb/s:61104.27



encoded 6938 frames, 9.09 fps, 61104.27 kb/s


G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\mp4box\mp4box.exe" -tmp "G:\temp\RipBot264temp" -add "G:\temp\RipBot264temp\video.264":name="Coll" -fps 23.976 -add "G:\temp\RipBot264temp\audio.aac":lang=eng -mpeg4 -new "G:\Coll.mp4"

AVC-H264 import - frame size 1920 x 1080 at 23.976 FPS

Import results: 6938 samples - Slices: 78 I 4114 P 2746 B - 7012 SEI - 73 IDR

AAC import - sample rate 48000 - MPEG-4 audio - 6 channels

Saving G:\Coll.mp4: 0.500 secs Interleaving

-------------------------

Elapsed Time: 00h:16m:54s

[Atak_Snajpera]

What's audio duration reported in ripbot

BTW. What is this???
-bitrate 235932

[rendez2k]

OK, I re-installed RB in case there was an issue. I then re-added the MKV as I didn't notice the audio length before. Audio is correctly being reported. But now, it just sits there initializing and not starting the encode!

As for the bitrate, I've no idea. All I told RB to do is a 2-pass encode, fit to HD res and DL DVD size.

Edit: OK, looks like the initaliaztion issue is due to me changing the output path or the location of RipBot? Does it store settings in the registry?



G:\>"C:\Program Files (x86)\RipBot\tools\bepipe\bepipe.exe" --script "import(^G:\temp\RipBot264temp\job1\job1.avs^)" | "C:\Program Files (x86)\RipBot\Tools\enc_aacPlus\enc_aacPlus.exe" - "G:\temp\RipBot264temp\audio.aac" --lc --br 327680 --mpeg4aac

The system cannot find the path specified.


G:\>"C:\Program Files (x86)\RipBot\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot\tools\x264\x264_x64.exe" --pass 1 --bitrate 9173 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 172535 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

The system cannot find the path specified.


G:\>"C:\Program Files (x86)\RipBot\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot\tools\x264\x264_x64.exe" --pass 2 --bitrate 9173 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 172535 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

The system cannot find the path specified.


G:\>"C:\Program Files (x86)\RipBot\tools\mp4box\mp4box.exe" -tmp "G:\temp\RipBot264temp" -add "G:\temp\RipBot264temp\video.264":name="Coll" -fps 23.976 -add "G:\temp\RipBot264temp\audio.aac":lang=fre -mpeg4 -new "G:\Coll.mp4"

The system cannot find the path specified.
-------------------------

Elapsed Time: 00h:00m:00s

[fAy01]

I tried to convert anime with Ripbot and it still does not work.

1-- Ive tried editing the script to 23.976 like you told me to it didn't work.
2-- Decimate it didn't work.
3-- Assume FPS it didn't work.
4-- Inverse Telecine it didn't work.
5-- Convert FPS it didn't work.

Would you mind encoding it!

Sample
http://www.mediafire.com/download.php?knqojyzmzmy

Rip
http://www.mediafire.com/download.php?nmynzmewljq

[Atak_Snajpera]

video=DirectShowSource("C:\Users\Dawid\Desktop\NS93_[SAMPLE].mkv",audio=false,convertfps=true).ConvertToYV12()
modify script and everything will be ok.

[fAy01]

hey can you also add a drop down menu for fps and add the option same as source and a batch mode option too!!!

[Atak_Snajpera]

http://www.mediafire.com/file/mmfwdz1zmyg/NS93_[SAMPLE].mp4