RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[pacaveli211]

Lighto, thanks, will try this out. One question though: if I delete "job*_MuxFiles.cmd" would I still get a processed video file in the output?

you should still get the .264 in the temp folder
obviously you shouldn't get an mkv file though

[valkyrie743]

hey guys, i would like to know how i can change the average bitrate my encoded MKV videos play.
2 years back, i backed up my copy of The dark knight using an older version of ripbot (not sure what version it was 2 years ago) well here is some basic meta data of that encoded file

Format : Matroska
File size : 11.1 GiB
Duration : 2h 32mn
Overall bit rate : 10.5 Mbps
Encoded date : UTC 2009-01-01 13:28:57
Writing application : mkvmerge v2.4.0 ('Fumbling Towards Ecstasy') built on Oct 11 2008 20:13:15
Writing library : libebml v0.7.7 + libmatroska v0.8.1

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 32mn
Bit rate mode : Variable
Bit rate : 9 633 Kbps
Maximum bit rate : 25.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.194
Stream size : 10.2 GiB (92%)
Writing library : x264 core 65 r1029M cb3c213
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy_rd=1.0:0.0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=crf / crf=22.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / vbv_maxrate=25000 / vbv_bufsize=25000 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00

Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : A_AC3
Duration : 2h 32mn
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 697 MiB (6%)


as you can see, my overall bit rate is 10.5 Mbps and lower it shows a bit rate of 9 633 Kbps

well i recently am re-backing up all of my movies with DTS master audio. (i made the mistake and did a AC3 rip back when i back this up) so today i just did a encode of the dark knight but this is what i get?

Format : Matroska
File size : 5.48 GiB
Duration : 2h 32mn
Overall bit rate : 5 152 Kbps
Movie name : The dark knight 1080P 2
Encoded date : UTC 2011-05-29 22:25:09
Writing application : mkvmerge v4.6.0 ('Still Crazy After All These Years') built on Mar 10 2011 02:50:32
Writing library : libebml v1.2.0 + libmatroska v1.1.0

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 32mn
Bit rate mode : Variable
Bit rate : 4 410 Kbps
Maximum bit rate : 25.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.089
Stream size : 4.69 GiB (86%)
Writing library : x264 core 114 r1924 08d04a4
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=22.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=25000 / vbv_bufsize=25000 / crf_max=0.0 / nal_hrd=vbr / ip_ratio=1.40 / aq=1:1.00

as you can see the file size is HALF the size, my overall bitrate is 5,152 Kbps and other bit rate shows 4 410 Kbps.
the picture quality imo on my HDTV playing over my HTPC running XBMC (windows) 10.1 stable build is poor. bit rate of 4,410 Kbps for a 1080P imo is to low and i would like to have it around 10-12,000Kbps

I would like to add that i notice a quality hit and that is why i am writing. videos with dark scenes show allot more blocky pixelation. its getting to me. i do like the smaller file sizes BUT i'm not happy with the quality.
is there a way that i can choose an average bitrate to use?

how would i go about changing this? thanks :)

[pacaveli211]

lower cq or specify bitrate/size with 2 pass....

[valkyrie743]

lower cq or specify bitrate/size with 2 pass....

I know VERY little about video encoding, what is CQ and by lowering it, what does it do?

[buffalofloyd]

I know VERY little about video encoding, what is CQ and by lowering it, what does it do?

The lower the CQ the higher the video bitrate but in the end you will not be able to determine what the final size of the movie will be. I suggest using the 2-pass mode and you can select the final output size of the video or the video bit rate individually. Personally I encode all my BD movies that are 1080p with a video bit rate of 8192 kbps and I think they look great. Good luck!

[valkyrie743]

The lower the CQ the higher the video bitrate but in the end you will not be able to determine what the final size of the movie will be. I suggest using the 2-pass mode and you can select the final output size of the video or the video bit rate individually. Personally I encode all my BD movies that are 1080p with a video bit rate of 8192 kbps and I think they look great. Good luck!

sweet, i may try that tonight and just have my computer shut down when done.

how do i set up a 2 pass encode and where can i input desired bit rate or file size?

[guest]

Is there a way to set the language you want to use, in Ripbot's ini file. eg:- English, instead of "undetermined"

[Ajax_Undone]

Is there a way to set the language you want to use, in Ripbot's ini file. eg:- English, instead of "undetermined"

No.
You must make sure the track you want is the one selected so you dont botch it. :)

[Atak_Snajpera]

@mrpitman
add these switches
http://www.picamatic.com/show/2011/05/30/02/17/7594657_415x643.png

[pacaveli211]

The lower the CQ the higher the video bitrate but in the end you will not be able to determine what the final size of the movie will be. I suggest using the 2-pass mode and you can select the final output size of the video or the video bit rate individually. Personally I encode all my BD movies that are 1080p with a video bit rate of 8192 kbps and I think they look great. Good luck!

sweet, i may try that tonight and just have my computer shut down when done.

how do i set up a 2 pass encode and where can i input desired bit rate or file size?

I wouldn't do that unless you need a specific size.
use the CQ values. specifying size / bitrate like that will have some negative effects:
some movies will require more / less bitrate
your encodes will be longer since it has to run 2 passes

the only advantage is if you need a specific size and a potential placebo from unnecessary bits =P

just find a CQ value that's good / works for you.
try 20. if the files are too big / seem to have to high of a bitrate, go with 22.

[pacaveli211]

@mrpitman
add these switches

not that I know how to fix his issue
but...I've burned 100's of AVCHD's without that.
personally I'd suggest leaving it off for such low bitrate stuff
it will (at least with my player) give you issues with fast forward / rewinding though.
otherwise you don't notice.

won't hurt to try it though.

[ahmad2008]

hi , i do not know if this is the right place for my question

will the program works fine if i replace the x264 codec with the latest release of x264 r1995 ??

[pacaveli211]

x264 is not a codec
you can swap out the x264 exes with newer builds though
just make sure you name them properly and get the 8bit ones

[Ajax_Undone]

x264 is not a codec
you can swap out the x264 exes with newer builds though
just make sure you name them properly and get the 8bit ones

Um yes, yes it is a codec! A CLI Codec for sure, but a codec none the less. :)

[LigH]

Well, as "Radio Eriwan" uses to reply: "Depends."

A "codec" is "a coder or a decoder". In the case of x264, an (en)coder only.

As an independent executable, many people prefer to call it "encoder" specifically, to separate it from codec libraries which are used by video tools or even installed in operating systems, but not executable on their own. But that's a matter of habit.
__

And: Substituting x264 versions / revisions may usually work. Until the set of command line options and default values is changed remarkably again.

[pacaveli211]

no, it's not a codec
h264 is the codec
x264 is just software that encodes using the h264 codec

[QBhd]

no, it's not a codec
h264 is the codec
x264 is just software that encodes using the h264 codec

+1

qb

[LigH]

So if e.g. "a VfW codec" shall not be called "codec" because you prefer "codec" meaning the theoretical standard over the practical implementation, how would you call them now, all of a sudden, after decades of habit using this term already?

Well, I am used to see a "codec" as specific software implementation (see also: the DivX and the Xvid VfW/ICM codecs, or the LAME ACM codec), and ITU-T H.261, H.263, H.264, G.723 etc. as theoretical algorithms or specifications, yet without implementation.

The english Wikipedia confirms my opinion:

http://en.wikipedia.org/wiki/Codec
... A codec (the program) should not be confused with a coding or compression format or standard – a format is a document (the standard), a way of storing data, while a codec is a program (an implementation) which can read or write such files. In practice "codec" is sometimes used loosely to refer to formats, however.

[pacaveli211]

so you're saying anything that can read and write a file is a codec?
or something that can encode is a codec?
so surcode DTS is a codec?
so DTS Master Audio Suite is a codec?
nope...these things are just software
so tsMuxeR is a codec? nope, it's just muxing software

[benjyv]

Hi Atak !!

If I change "Trelis Quant." from Standard to Enhanced , should I change too , "Adaptive B-Frames" ????

[LigH]

@ pacaveli211:

It is not me all alone who says that (or something similar, as the file access is not part of the codec, which is rather only "the kernel of the conversion process")...

If it is persistent in Wikipedia, it is possibly an opinion of a majority. Hopefully. Yet it is no definition of the term. But which person would be rightfully able and responsible to define a term like "codec"?

So, the Wikipedia suggests to use "the codec" for "the software implementation of a standard", and "the standard" for a document, specification, algorithm.


Examples:

MPEG4 Visuals (ISO/IEC 14496 Part 2) is a standard, independent of its specific implementation as a codec. It does not process video. It is only written on paper or in a text file. Passive.

DivX is a specific MPEG4 SP/ASP software codec; "Dr.DivX" is an encoding application containing the DivX 6 codec; "DivX 6 Pro" is a "VfW codec" DLL containing the DivX 6 codec, to be used by VfW compatible video applications.

Xvid is a specific MPEG4 SP/ASP software codec; Koepi's Xvid VfW codec contains the Xvid codec in a VfW codec framework; ffmpeg contains the Xvid codec in a CLI application.

Toshiba TC35273 is a specific MPEG4 SP@L1 hardware codec chip, to be used by moblie devices like cellphones.

The "DTS Master Audio Suite" is an application, containing the "DTS-HD Master Audio" codec as audio processing routine.

RipBot264 is a GUI (Graphical User Interface) calling specific encoder applications which contain different codecs as encoding routines.

Yikes, that was close. I was almost off-topic.

[crakarjax]

suggestions:
- dont re-analyze when adding multiple titles from the same disc (blu-ray)
- can you add ac3 support for mp4 files?
- text doesn't scale well with changes in windows 7 text size, as set through display properties
- add support for default audio formats per container/audio encoder

hope it helps

[chane2k1]

@Atak_Snajpera

I just wanted to let you know that when selecting the Dolby TrueHD stream and selecting Wav as the output converts the bit-depth to 16bit even if the source was 24bit. I haven't tried to Flac but, a fix for the Wav bit-depth would be greatly appreciated. Thank you.

[73ChargerFan]

chane2k1, eac3to can convert 24bit THD to 24bit flac, but it'd be outside this gui.

[crackinhedz]

two questions, if already answered please point me in the right direction...

profile 4.0 "Bluray" & "Progressive" ...are they one and the same?

also, in regards to Lossless audio (TrueHD and Dts HD-MA), I can demux the lossless audio stream from the .m2ts file using tsRemuX, then I can mux the lossless audio back into my converted mkv file using mkvmerge.

I was curious why this is not possible going straight through Ripbot??

Thanks for any insight

[chane2k1]

chane2k1, eac3to can convert 24bit THD to 24bit flac, but it'd be outside this gui.

thanks for testing that for me, im just hopping to have it set in the gui or just have the truehd stream de-multiplex option, so i can do the conversion myself. the goal is to convert my 24bit truehd discs down to dts 1536 with 24bit depth. i just have a lot to do. it's cumbersome to do them all manually.

[pacaveli211]

thanks for testing that for me, im just hopping to have it set in the gui or just have the truehd stream de-multiplex option, so i can do the conversion myself. the goal is to convert my 24bit truehd discs down to dts 1536 with 24bit depth. i just have a lot to do. it's cumbersome to do them all manually.

why are you wasting time doing such things?
just keep the truehd...or grab the core

[ahmad2008]

And: Substituting x264 versions / revisions may usually work. Until the set of command line options and default values is changed remarkably again.

well ,
if the replacement of x264 must be combined with doing some changes in the set of command line options and default values then i should keep x264 as it is with no replacement at all.
because i am not capable of doing such thing.
-------
the reason i asked about updating x264 is that i have more than 20GB video files i want to reduce their sizes ( Encoding ) at highest quality as possible.
----------
i am new boy at encoding so bear with me please.

[chane2k1]

why are you wasting time doing such things?
just keep the truehd...or grab the core

this is not a waste of time for someone that appreciates sound. truehd unfortunately is not an acceptable option for me to keep compatibility around the house and i'd like to have the audio be as close to the source as i can. dts-1536 supports a 24bit depth and truehd's core is only 16bit.

if the -down16 switch is removed or a truehd stream option is added i wont have to demux once with ripbot then again with eac3to for the truehd stream. crossing my fingers.

[Atak_Snajpera]

24 bit audio = placebo. If humans can't hear noise in 16 bit sound so why would you waste space for 24 bit????

[kypec]

24 bit audio = placebo. If humans can't hear noise in 16 bit sound so why would you waste space for 24 bit????
Moreover, IIRC the lossy formats like AC3 or DTS do not have any real bit-depth as such anymore -> the input signal has been transformed from time to frequency domain.
Besides, one can encode lossless audio to 640kbps AC3 which is considered just as good as 1536kbps DTS with free encoder (Aften) save a bit of space and lots of money at the same time! :p

[crakarjax]

Moreover, IIRC the lossy formats like AC3 or DTS do not have any real bit-depth as such anymore -> the input signal has been transformed from time to frequency domain.
Besides, one can encode lossless audio to 640kbps AC3 which is considered just as good as 1536kbps DTS with free encoder (Aften) save a bit of space and lots of money at the same time! :p

You still have to represent frequency with some number of bits. More bits = higher frequency resolution.

[pacaveli211]

two questions, if already answered please point me in the right direction...

profile 4.0 "Bluray" & "Progressive" ...are they one and the same?

also, in regards to Lossless audio (TrueHD and Dts HD-MA), I can demux the lossless audio stream from the .m2ts file using tsRemuX, then I can mux the lossless audio back into my converted mkv file using mkvmerge.

I was curious why this is not possible going straight through Ripbot??

Thanks for any insight

[HIGH 4.0] HD . BluRay . Consoles
is old, if you look in a new zip it shouldn't be there
it was replaced with the progessive
HD audio cannot be copied simply because the feature hasn't been added. this is up to Atak



well ,
if the replacement of x264 must be combined with doing some changes in the set of command line options and default values then i should keep x264 as it is with no replacement at all.
because i am not capable of doing such thing.
-------
the reason i asked about updating x264 is that i have more than 20GB video files i want to reduce their sizes ( Encoding ) at highest quality as possible.
----------
i am new boy at encoding so bear with me please.

I've replaced x264 builds without doing anything else, and everything worked fine. the command line options should still be the same...unless they've made some major changes to it.
this is all LigH was saying.


also, x264 is software, it's not a codec =)

[pacaveli211]

this is not a waste of time for someone that appreciates sound. truehd unfortunately is not an acceptable option for me to keep compatibility around the house and i'd like to have the audio be as close to the source as i can. dts-1536 supports a 24bit depth and truehd's core is only 16bit.

if the -down16 switch is removed or a truehd stream option is added i wont have to demux once with ripbot then again with eac3to for the truehd stream. crossing my fingers.

no, someone who appreciates sound, like myself, wouldn't be messing with stuff, wasting time, and ruining quality.

what do you have that's not compatible with at least the ac3 core in truehd? are you never going to upgrade your equipment? NEVER? might as well keep the truehd...let it use the core for now...and then when you do upgrade you'll have stuff that can play the full truehd.

another, less optimal, solution is to encode the truehd to a full DTS-HD MA track

[crackinhedz]

[HIGH 4.0] HD . BluRay . Consoles
is old, if you look in a new zip it shouldn't be there
it was replaced with the progessive
Im using v1.16.5 and both profiles are choosable...should I simply delete 4.0 Bluray?


http://i176.photobucket.com/albums/w184/crackinhedz/Capture-18.jpg

http://i176.photobucket.com/albums/w184/crackinhedz/profile1.jpg



also, I notice some folks here have a profile 4.1, is this just making a change to .txt file and renaming it 4.1?? I know the only advantage is a higher bitrate which might be overkill for a compressed file...but I was just curious how to get this profile?

[pacaveli211]

Im using v1.16.5 and both profiles are choosable...should I simply delete 4.0 Bluray?

also, I notice some folks here have a profile 4.1, is this just making a change to .txt file and renaming it 4.1?? I know the only advantage is a higher bitrate which might be overkill for a compressed file...but I was just curious how to get this profile?

you just have the 4.0 from previous versions
when you extract the ripbot stuff it just adds/replaces. it doesn't delete any old stuff. if you download ripbot from the first page and look you'll see the bluray 4.0 is no longer there. so you can delete it if you want. it's just a text file...doesn't really matter either way

I have a 4.1 profile I use for BD25 stuff. I can give you my command line for it if you want to make yours. if you're using CQ values or locking size (unless your size lock is like 20GB+) it's not gonna help you any

[chane2k1]

You still have to represent frequency with some number of bits. More bits = higher frequency resolution.

thank you, someone that understands.

all i was suggesting is that the -down16 switch be optional, this would be useful for a lot of people, not just me. cool, peace. ill take care of it myself.

[pacaveli211]

have you tools considered the fact that while you're using those extra bits for a negligible 24bit vs 16 bit that you're degrading the quality because it could use those bits to provide better over-all sound quality? (this only applies to CBR encodes such as the discussed DTS 1536)

that being said if you are transcoding to Flac/wav or something, I don't see any reason why you shouldn't be able to keep the 24bit
there might've been a reason why it needed to be switched down to 16 though

[wtfmateAteam]

Has anyone had any luck running Ripbot in Linux ? I can get it to "run" but after demuxing streams I get an error at "Starting DirectShow conversion failed" ... I've been able to dupe WM11 into the Wine prefix as well as other DirectShow filters ... what exactly is it looking for here?

- WTF

[mrpitman]

Well this didn't work for me except it wouldn't play in my standalone bluray player made by $ony. So I just formatted PC, and reinstalled everything. That fixed the issue. I'm assuming somehow a codec in the sys files or registry becasme corrupt and messed up RipBiot. Thanks for everyone's help.


@mrpitman
add these switches
http://www.picamatic.com/show/2011/05/30/02/17/7594657_415x643.png

[LigH]

24 bit audio = placebo. If humans can't hear noise in 16 bit sound so why would you waste space for 24 bit????

Con:

It is useful for a very high dynamic = difference between the loudest and the quietest scene.

Linear integer samples would have a good resolution for loud scenes, but e.g. in classical music, there can be very quiet scenes as well, which will then have only very few bits of resolution left.

Floating point based audio formats don't have any issue here, they can scale the exponent and still have a mantissa with good resolution.

So the waste of space is rather the combination of lossless storage and linear integer representation.

You will probably have a better chance to hear a lack of resolution in quiet scenes with lossless 16 bit PCM integer samples, than to hear masked frequency parts in lossily coded Dolby Digital with floating point frequency parameters (good psycho-acoustic model assumed).

Even though the overall chance is low in an average furnished living room, anyway... ;)

[NiteShdw]

I'm having two issues.

1. In 1.16.5, the progress of the rip is no longer shown. In 1.16.4 and earlier it would show the percentage progress at the bottom. Now it doesn't.

2. In many rips, the ripping process runs twice. First, it extracts the audio/video and then it starts over, this time only extracting the audio (for a second time). What's causing this? Is there a way to prevent it from ripping twice?

[pacaveli211]

is it extracting audio and then encoding it?
or maybe extracting the track and then extracting the core?
I don't know what you choose when you're adding a job

[nekrosoft13]

Could someone help me solve duration issue?

Format : BDAV
Format/Info : Blu-ray Video
File size : 793 MiB
Duration : 20mn 58s
Overall bit rate : 5 288 Kbps
Maximum Overall bit rate : 48.0 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : VC-1
Format profile : AP@L2
Codec ID : 234
Duration : 20mn 58s
Bit rate : 4 286 Kbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Scan order : Bottom Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.414
Stream size : 643 MiB (81%)

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Format profile : Dolby Digital
Mode extension : CM (complete main)
Codec ID : 129
Duration : 20mn 58s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 28.8 MiB (4%)

http://img651.imageshack.us/img651/9482/capture2ry.jpg


Ripbot detects 26 some minutes for video and 20 minutes for audio
http://img593.imageshack.us/img593/8483/capture3ea.jpg

how can this be corected?

[NiteShdw]

is it extracting audio and then encoding it?
or maybe extracting the track and then extracting the core?
I don't know what you choose when you're adding a job

During the ripping stage, it'll go from 0% to 100%, then start right back over at 0% and run again. It appears to me that it's eac3to that's actually doing the two rips. I'm just curious if it's because of a certain audio type in the original disc or something.

It doesn't happen on every disc, but it happens on a lot.

[Atak_Snajpera]

@NiteShdw
After decoding Ripbot264 checks eac3to log. If ArcSoft Decoder Error is detected then it repeats whole proccess but this time without decoding whole DTS-MA to lossless format (.wav/.flac). Eac3to will be set to extract only DTS-core (lossy DTS 1,5Mbps). I think this better than famous can't open "../video.mkv" error ;)

how can this be corected?
very easy!
add this line
video=DirectShowSource("video.mkv",audio=false).ConvertToYV12().AssumeFPS("ntsc_video")

[darkio]

Hi all,
@Atak_Snajpera:
Hi, I've a very simple question about ripbot. if possibile to add as second encoder, the "cri-spurs coder".
It's a exe with command line like x264 and use spurs engine from toshiba and accept direct show files. License is freeware for personal use.

You can found here:
http://translate.google.it/translate?hl=it&sl=ja&tl=en&u=http%3A%2F%2Fwww.criware.jp%2Fspurscoder%2F

[Atak_Snajpera]

I don't speak japanese. Whole CriSpursCoder22101.txt is in that language.

[darkio]

I don't speak japanese. Whole CriSpursCoder22101.txt is in that language.

I've found translated readme.txt in english, can I post here ?

[darkio]

Command line "-help" can help you ?