Media Player Classic - BE Win32/x64

[wanezhiling]

mpc-be dxva2: http://i.imgur.com/Zdk0npE.png
lav dxva2: http://i.imgur.com/4uRvgGf.jpg
Well, mpc-be dxva2 perform same with lav dxva2 here, same vdi load, same framerate.


gtx 860m, 362.00 whql
I don't use 364.5 whql cuz it always eats 100% gpu usage with all videos/all players here, don't know why...

[Klaus1189]

I use latest Nvidia driver 364.51 from 08.03.2016
and with integrated MPC Video Decoder I get this:
https://drive.google.com/file/d/0B4y5u0gBKYqbQktLVjNwd0c0Nlk/view?usp=sharing

LAV Filters are fine:
https://drive.google.com/file/d/0B4y5u0gBKYqba3B6VWtMbXdpck0/view?usp=sharing

Seems like there is a bug in MPC-Decoder or splitter (??) which you cannot use with the lastest Nvidia Driver, LAV Filters do work like you see.

[wanezhiling]

hey hey...
660 is a kepler card which have only 4k_h.264@27~37fps ability (everyone in this forum should know this..), that explained the terrible playback with mpc-be dxva(99% video engine).
your lav is run with software decoding (0% video engine means sw decoding..), come on...

[Klaus1189]

hey hey...
660 is a kepler card which have only 4k_h.264@27~37fps ability (everyone in this forum should know this..), that explained the terrible playback with mpc-be dxva(99% video engine).
your lav is run with software decoding (0% video engine means sw decoding..), come on...

I disabled for my very old grafics card the internal DXVA filters.
https://drive.google.com/file/d/0B4y5u0gBKYqbNkxXN0dfWnZ1SnM/view?usp=sharing

Now it's perfect, thank you wanezhiling for your help, time goes by, I think I must upgrade ;-)
Are there new cards coming out the next time so I should wait, or are there very new ones already on the market?

Where can I read what framerates at what codecs the cards support?

[wanezhiling]

http://forum.doom9.org/showthread.php?t=171219
Follow him and his threads/posts :D

[Klaus1189]

:thanks:

[arrgh]

For me it's working fine, position remember and restore.

no, I have the configuration in the ini and all "filenames" and "filepositions" are empty resp. "0"

[Reino]

ffmpeg-20160317-N-79072-g83df0a8_win32.exe -hide_banner -i "http://manifest.us.rtl.nl/10/v166/aes/adaptive/components/actueel/rt
lnieuws/351620/2016w12/460c4426-c6e5-3f10-b6a5-851b07d85b8a.ssm/460c4426-c6e5-3f10-b6a5-851b07d85b8a.ism/460c4426-c6e5-3f10-b6a5
-851b07d85b8a-audio=128000-video=4250000.m3u8"
[http @ 0376fea0] HTTP error 418 I'm a teapot
http://manifest.us.rtl.nl/10/v166/aes/adaptive/components/actueel/rtlnieuws/351620/2016w12/460c4426-c6e5-3f10-b6a5-851b07d85b8a.
ssm/460c4426-c6e5-3f10-b6a5-851b07d85b8a.ism/460c4426-c6e5-3f10-b6a5-851b07d85b8a-audio=128000-video=4250000.m3u8: Server return
ed 4XX Client Error, but not one of 40{0,1,3,4}

ffmpeg-20160317-N-79072-g83df0a8_win32.exe -hide_banner -user_agent "Mozilla Firefox" -i "http://manifest.us.rtl.nl/10/v166/aes/
adaptive/components/actueel/rtlnieuws/351620/2016w12/460c4426-c6e5-3f10-b6a5-851b07d85b8a.ssm/460c4426-c6e5-3f10-b6a5-851b07d85b
8a.ism/460c4426-c6e5-3f10-b6a5-851b07d85b8a-audio=128000-video=4250000.m3u8"
Input #0, hls,applehttp, from 'http://manifest.us.rtl.nl/10/v166/aes/adaptive/components/actueel/rtlnieuws/351620/2016w12/460c44
26-c6e5-3f10-b6a5-851b07d85b8a.ssm/460c4426-c6e5-3f10-b6a5-851b07d85b8a.ism/460c4426-c6e5-3f10-b6a5-851b07d85b8a-audio=128000-vi
deo=4250000.m3u8':
Duration: 00:19:30.00, start: 10.000000, bitrate: 0 kb/s
Program 0
Metadata:
variant_bitrate : 0
Stream #0:0: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 141 kb/s
Stream #0:1: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p, 1280x720 [SAR 1:1 DAR 16:9],25 fps, 25 tbr, 90k tbn, 50 t
bc

Last week rtlxl.nl has fortified their servers and only by specifying a useragent can FFMpeg open the m3u8-playlist.

As MPC-BE (as well as MPC-HC) can't play the hls videostream, is it possible to add an option to enter a useragent?

[Shiandow]

Kind of unrelated but that's the first time I've seen a "HTTP 418 I'm a teapot" error in the wild. Someone at rtlxl.nl has a sense of humour.

[LouieChuckyMerry]

The name should be in the file name of the screenshot, so maybe use a viewer displaying the file name even in fullscreen as lay-over.

The portable version of IrfanView solved my problem, many thanks for an excellent idea :) .

[Klaus1189]

What version of MediaInfo is in latest builds? Seems like there is 0.7.83 but it gives me some differences in some files if I compare to the program MediaInfo 0.7.83. Very strange

[Aleksoid1978]

We use git-v0.7.83-2-g053f252 version of MediaInfo - not final 0.7.873

[kissglay]

Recent builds (tested on 1322, 1317) didn't close file handles after closing the file. Must exit the program to free the handles.

[Klaus1189]

I just saw, that they have released MediaInfo 0.7.84. Can you please update MPC-BE to that version? :)

[gzuz]

Hello everyone,

I need help. I'm experiencing dropped frames when watching 60P videos. Using MPC-BE + LAV + MadVR. I've tried multiple settings and players but nothing works. Some just drop less than the others. All other videos run fine. Only 60P ones cause frame drops.

My CPU is Intel Core i7 6700K, and I'm using the integrated graphics card. Windows 10. My monitor - http://postimg.org/image/ygl37m7lz/
Running 1920x1080@60Hz. Also, I'm using Software Decoding since I see no difference using DXVAs.

Fullscreen MPC-BE - http://postimg.org/image/k7rb2vjzj/full/
Windowed Mode MPC-BE - http://postimg.org/image/9d6d00z5z/full//

Could someone please tell me what to tweak, in order to fix this? This is a 10 minute video and I get a few frame drops in Fullscreen every time (no, not the ones at start of playback). However, in Windowed Mode I get thousands. Wondering how to get rid of them all, if possible. Or at least have the same number of dropped frames in Windowed Mode, as I have in Fullscreen mode.

If you need more information, please say so.

I'll do anything. Thanks in advance to everyone!

G

[ryrynz]

I need help. I'm experiencing dropped frames when watching 60P videos. Using MPC-BE + LAV + MadVR. I've tried multiple settings and players but nothing works. Some just drop less than the others. All other videos run fine. Only 60P ones cause frame drops.


Bet you its madVR related. Lower your settings or change renderer and retest.

If you have no issues with any other renderer then if you still need help post in the madVR forum.

[Aleksoid1978]

Hello everyone,

I need help. I'm experiencing dropped frames when watching 60P videos. Using MPC-BE + LAV + MadVR. I've tried multiple settings and players but nothing works. Some just drop less than the others. All other videos run fine. Only 60P ones cause frame drops.

My CPU is Intel Core i7 6700K, and I'm using the integrated graphics card. Windows 10. My monitor - http://postimg.org/image/ygl37m7lz/
Running 1920x1080@60Hz. Also, I'm using Software Decoding since I see no difference using DXVAs.

Fullscreen MPC-BE - http://postimg.org/image/k7rb2vjzj/full/
Windowed Mode MPC-BE - http://postimg.org/image/9d6d00z5z/full//

Could someone please tell me what to tweak, in order to fix this? This is a 10 minute video and I get a few frame drops in Fullscreen every time (no, not the ones at start of playback). However, in Windowed Mode I get thousands. Wondering how to get rid of them all, if possible. Or at least have the same number of dropped frames in Windowed Mode, as I have in Fullscreen mode.

If you need more information, please say so.

I'll do anything. Thanks in advance to everyone!

G

Ask author of madVR.

[Aleksoid1978]

Recent builds (tested on 1322, 1317) didn't close file handles after closing the file. Must exit the program to free the handles.

Thanks - fixed.

[amayra]

can you update "SubRenderIntf.h" to 1.0.9 ?

[arrgh]

no, I have the configuration in the ini and all "filenames" and "filepositions" are empty resp. "0"

ok, some clarification :
I'm using Win8.1x64;
even when I push down UAC to the lowest, I need to start MPC-BE as Administrator in order to be able to change settings in the *.ini; obviously MPC-BE is not able to write into the ini-file, if started as standard user...

is it because I'm using MPC-BE with integrated madVR from Shark007...his codecs are also enforcing UAC...

or is this a Standard behaviour of Win8.1?

[huhn]

you don't need admin rights to change settings.

install an normal version to the default folder and try that again.

[Reino]

As MPC-BE (as well as MPC-HC) can't play the hls videostream, is it possible to add an option to enter a useragent?
I wish you would've at least let me know if you couldn't comply with my request, instead of just ignoring my post.

[Aleksoid1978]

can you update "SubRenderIntf.h" to 1.0.9 ?

Why, something not working??

[Aleksoid1978]

I wish you would've at least let me know if you couldn't comply with my request, instead of just ignoring my post.

MPC-BE don't support hls, so it can play it only with LAVSource. You can ask it's author for useragent change.

[Klaus1189]

you don't need admin rights to change settings.

install an normal version to the default folder and try that again.

I need Admin rights to enable ini file saving.
I use latest 1.4.6.1368 from Yandex. Installer version.

https://drive.google.com/file/d/0B4y5u0gBKYqbUHRqMW02c3VpclU/view?usp=sharing

[huhn]

the installer doesn't allow you change the folder so try this:

get a portable version or copy the mpc be folder to another folder that is not your program files folder like c:/mpc-be.

yet again you don't need the to store your settings in the ini.

mpc-be is working totally fine by not letting you select store settings in ini. because it simply doesn't have the rights to do that in the current folder.

[Klaus1189]

Yeah, I don't use ini file, but it is usable for portable installation.

@devs: When there is a new stable release, please let me know, so I can check translation again some days before. Thank you :)

[xiringu]

I changed this:

Youtube->Initial buffer size=1 Mb, instead of the default 5 Mb.

And now I don't get sound (most of the time), only image. If I restart the video a few times, sound magically appears.

Changed back to 5 Mb and everything is working as usual.

Bug?

Thanks

[Telion]

The whole "Initial buffer size" section is just removed in commit 1386, so nothing to play with since the next nightly. BTW default is 3 Mb.

[Klaus1189]

Now MPC-BE can already decode external vtt subtitles. I just created a MKV file with internal VTT subtitles.
The WebVTT subtitle stream isn't recognized, as we expected. Please add support.
PM: Link to the file

[Klaus1189]

Can we have that, too?
https://github.com/mpc-hc/mpc-hc/commit/2ff1b3776d0915dd03ef32e866696212fadd26c6

[Aleksoid1978]

Can we have that, too?
https://github.com/mpc-hc/mpc-hc/commit/2ff1b3776d0915dd03ef32e866696212fadd26c6

Implement long time ago.

[Klaus1189]

Yes, with internal filters it works, but I thought this commit would also add it for external filters like LAV ...

[Aleksoid1978]

Yes, with internal filters it works, but I thought this commit would also add it for external filters like LAV ...

It's work fine with LAV Source/Splitter. If not - give me a sample.

[Klaus1189]

No, I have a videosample recorded with my Samsung Galaxy Note 4. This file is played right with all integrated filters, but if I use LAV Splitter + Decoder it is played upside down:
https://drive.google.com/file/d/0B4y5u0gBKYqbTW1wcW4xcTEyckE/view?usp=sharing

[huhn]

sound like a problem with lav filter not mpc-be

[nevcairiel]

sound like a problem with lav filter not mpc-be

LAV Splitter detects the info fine, and MPC-HC or madVR can swap it fine as well. Don't jump to conclusions if you don't know anything to base them on.

[Aleksoid1978]

Now MPC-BE can already decode external vtt subtitles. I just created a MKV file with internal VTT subtitles.
The WebVTT subtitle stream isn't recognized, as we expected. Please add support.
PM: Link to the file

Done.

[Aleksoid1978]

No, I have a videosample recorded with my Samsung Galaxy Note 4. This file is played right with all integrated filters, but if I use LAV Splitter + Decoder it is played upside down:
https://drive.google.com/file/d/0B4y5u0gBKYqbTW1wcW4xcTEyckE/view?usp=sharing

Fixed.

[Klaus1189]

Thank you. I use the internal filters. These are very nice.
I tested LAV Filters and it seems that it doesn't support WebVTT in MKV. I created an issue at github.

[arrgh]

[QUOTE=Klaus1189;1763543]Yeah, I don't use ini file, but it is usable for portable installation.
QUOTE]

...not only for portable Installation.
I have more than 4 PC running with MPC-BE and unfortunately from time to time a new Installation is needed (or restore of an older System backup)...
in such cases the Setup of MPC-BE is finished by simply droping the saved ini into the MPC-BE Folder... very convinient...

[Klaus1189]

Yeah, I don't use ini file, but it is usable for portable installation.


...not only for portable Installation.
I have more than 4 PC running with MPC-BE and unfortunately from time to time a new Installation is needed (or restore of an older System backup)...
in such cases the Setup of MPC-BE is finished by simply droping the saved ini into the MPC-BE Folder... very convinient...

Yes, you're right ;)

Updated german translation -> pm

[Klaus1189]

Is it possible to implement seamless/gapless AVCHD playback? I remember when I tested Potplayer some time ago it seems to support it. AVCHD files are normally split into 4GB files. So if you record longer than about 22-23 Minutes in 1080p50 with a camcorder like my X900M then you have more than one files. If you just add it into playlist, there is an audio gap. That feature would help me a lot.

[Klaus1189]

- ""
should only be display if the chapters have a name:
https://drive.google.com/open?id=0B4y5u0gBKYqbdGJKdVhsa0YybGM

[Aleksoid1978]

- ""
should only be display if the chapters have a name:
https://drive.google.com/open?id=0B4y5u0gBKYqbdGJKdVhsa0YybGM

Upload sample file.

[Klaus1189]

Upload sample file.

sent you a pm :)

[Klaus1189]

@Aleksoid1978: Thank you for r1423 :)

I create MKV files but how do I get tags displayed like here?
http://forum.doom9.org/showthread.php?p=1477627#post1477627

Does the internal MKV splitter support that? I also don't know if the global tags are the right way? What tag "names" do I need for the fields displayed in Properties -> Details?

[Aleksoid1978]

@Aleksoid1978: Thank you for r1423 :)

I create MKV files but how do I get tags displayed like here?
http://forum.doom9.org/showthread.php?p=1477627#post1477627

Does the internal MKV splitter support that? I also don't know if the global tags are the right way? What tag "names" do I need for the fields displayed in Properties -> Details?

Clip - TITLE
Author - ARTIST
Copyright - COPYRIGHT
Description - COMMENT or DESCRIPTION

[mood]

r1420 x64 is broken, mp4 files not play

r1417 x64 works perfectly

[wanezhiling]

r1420 x64 is broken, mp4 files not play

r1417 x64 works perfectly

same here