Media Player Classic - BE Win32/x64

[bugmen0t]

edit
___
video not loaded on Preset > Compact
(player not responding)

svn2468
Win7 32b
madVR

[Poutnik]

There are error resilience settings Careful / Compliant / Agggressive in MPC video decoder.

I suppose this mean level a/o sensitivity of corrective stream actions. But what is user impact of more / less corrections ?

Does more corrections mean less impact as more errors is fixed ?
Or does it mean bigger impact as it may ignore or replace some data ?

[SamKook]

"<1min tracks" ?

Sorry it took so long to respond, not all <1min track, but there's quite a few.
Most of them are between 30sec and 4 mins with the occasional 10-17min.

[alexins]

MPC-BE v1.1.1.0 -dev build 2479 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2479/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2479 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1410.0.html) (Dev. MPC-BE)

[Lord Maius]

Italian translation updated (rev.2439)

http://sdrv.ms/ZUDfd5

[alexins]

Italian translation updated (rev.2439)

http://sdrv.ms/ZUDfd5

added in rev.2480 (http://svnlog.mpc-next.ru/revision.php?repname=MPC-BE+Team&rev=2480)

[alexins]

MPC-BE v1.1.1.0 -dev build 2484 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2484/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2484 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1412.0.html) (Dev. MPC-BE)

[alexins]

MPC-BE v1.1.1.0 -dev build 2493 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2493/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2493 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1415.0.html) (Dev. MPC-BE)

[mindbomb]

Question:
is there gonna be any work done on mpc audio renderer?

atm, it doesn't accept multichannel audio or 24 bit audio, and audio persists on pauses.

[Aleksoid1978]

Question:
is there gonna be any work done on mpc audio renderer?

atm, it doesn't accept multichannel audio or 24 bit audio, and audio persists on pauses.

About issue on pause/seek - try select Shared Mode.

And yes - modify audio renderer in my planes :).

[mindbomb]

shared mode works fine.

one more thing, in options>playback, why is default track preference checked by default?

shouldn't it be forced track preference, if anything?

[Aleksoid1978]

Default track preference - when enable - MPC-BE use internal logic for select track. If disable - then as is, example LAV have own select track logic.

[Reino]

As of Rev.2509 the OSD is permanently shown. Enabling/disabling "Show OSD (requires restart)" has no effect. Although Google Translate does a bad job on the Russian translation, most likely Rev.2505 (http://svnlog.mpc-next.ru/revision.php?repname=MPC-BE+Team&path=%2F&rev=2505&peg=2505) is the culprit.

[judelaw]

As of Rev.2509 the OSD is permanently shown. Enabling/disabling "Show OSD (requires restart)" has no effect. Although Google Translate does a bad job on the Russian translation, most likely Rev.2505 (http://svnlog.mpc-next.ru/revision.php?repname=MPC-BE+Team&path=%2F&rev=2505&peg=2505) is the culprit.

Fixed at rev. 2517;

[isamu]

So....is this worth using over Vanilla MPC-HC?

[Zulithe]

Can i have this installed side-by-side with MPCHC? It uses its own settings?

[judelaw]

Can i have this installed side-by-side with MPCHC? It uses its own settings?

Yes, of course

[wanezhiling]

http://pan.baidu.com/share/link?shareid=442058&uk=3558042035

Use "save thumbnails" feature, froze at here (http://i.imgur.com/dcbzCi1.png), surely related to internal dxva decoder.

Another problem on this H264i file is slow seeking speed, extremely slow... o.O
Jump on the seekbar quickly, mpc-be crashed...

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=442058&uk=3558042035

Use "save thumbnails" feature, froze at here (http://i.imgur.com/dcbzCi1.png), surely related to internal dxva decoder.

Another problem on this H264i file is slow seeking speed, extremely slow... o.O
Jump on the seekbar quickly, mpc-be crashed...

Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_2519.7z

[wanezhiling]

http://i.imgur.com/LilsLYQ.jpg

:thanks::D Fixed!

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=442058&uk=3558042035
Another problem on this H264i file is slow seeking speed, extremely slow... o.O
Jump on the seekbar quickly, mpc-be crashed...

What about this ??

[wanezhiling]

Improved much, no crash now.
Still a little slow though compared to PotPlayer.:)

[alexins]

MPC-BE v1.1.1.0 -dev build 2521 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2521/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2521 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1426.0.html) (Dev. MPC-BE)

[wanezhiling]

http://pan.baidu.com/share/link?shareid=444847&uk=3558042035
Can't have a normal playback, seems to be latest FFmpeg's problem?
MPC-HC is fine.

[alexins]

http://pan.baidu.com/share/link?shareid=444847&uk=3558042035
Can't have a normal playback, seems to be latest FFmpeg's problem?
MPC-HC is fine.

Yes, this is a problem in ffmpeg.

[therock003]

When you use file->save as to save the video, does it use direct streeam copy? I mean is there any rencoding?

Cause i want to use avisynth scripts to open a file from and to certain frames and save some video sequences, the same way i used to do this on vdub.

[Aleksoid1978]

When you use file->save as to save the video, does it use direct streeam copy? I mean is there any rencoding?

Cause i want to use avisynth scripts to open a file from and to certain frames and save some video sequences, the same way i used to do this on vdub.

No any rencoding. Direct streeam copy only.

[isamu]

OK silly question time..... does MPCBE or *ANY* software media player for that matter allow you to use it when watching streamed videos on the net, instead of Adobe Flash Player? Please let me know.

[paradoxical]

OK silly question time..... does MPCBE or *ANY* software media player for that matter allow you to use it when watching streamed videos on the net, instead of Adobe Flash Player? Please let me know.

You'd have to write a browser plugin that encapsulates the player and uses it to play the video instead. This wouldn't work if the streamed video is using any sort of encryption/DRM that requires Flash Player, though.

[turbojet]

mpc-be plays youtube videos with open file/url without using flash. It would be nice if there were browser plugins that would allow mpc-be to hook into the browser.

[paradoxical]

mpc-be plays youtube videos with open file/url without using flash. It would be nice if there were browser plugins that would allow mpc-be to hook into the browser.

Because they don't use any encryption/DRM. If Youtube did it wouldn't work because those would require using the Flash player.

[Lord Maius]

Italian txt language file updated (rev. 2542)

http://sdrv.ms/ZNVPIe

[alexins]

Italian txt language file updated (rev. 2542)

http://sdrv.ms/ZNVPIe

OK! Thanks!

[Lord Maius]

OK! Thanks!

Thanks to you all for this amazing player!

[alexins]

MPC-BE v1.1.1.0 -dev build 2568 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2568/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2568 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1443.0.html) (Dev. MPC-BE)

[bozek]

when can we expect the next stable release?

[alexins]

MPC-BE v1.1.1.0 -dev build 2574 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2574/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2574 (Nightly Builds) (http://dev.mpc-next.ru/index.php/board,29.0.html) (Dev. MPC-BE)

[pie1394]

Tested with build 2568... "starting in FSE" mode with madVR now works better than previous builds. Now it keeps screen blank instead of flashing back to desktop screen before the playback is truly started.

Build 2574 runs fine on my nVidia ION system --- But I does not use MPC-BE built-in FFMPEG decoder.

[alexins]

MPC-BE v1.1.1.0 -dev build 2582 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2582/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2582 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1451.0.html) (Dev. MPC-BE)

[alexins]

MPC-BE v1.1.1.0 -dev build 2591 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2591/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2591 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1455.0.html) (Dev. MPC-BE)

[alexins]

MPC-BE v1.1.1.0 -dev build 2605 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2605/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2605 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1463.0.html) (Dev. MPC-BE)

[wanezhiling]

http://pan.baidu.com/share/link?shareid=460845&uk=3558042035

With internal splitter, always display 4:3
With lav splitter, works fine as expected.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=460845&uk=3558042035

With internal splitter, always display 4:3
With lav splitter, works fine as expected.

Fixed, thanks :)

[insolo]

how to receive the Activation code from mpc-next.ru,i used hotmail and gmail,but nothing.

[alexins]

MPC-BE v1.1.1.0 -dev build 2615 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2615/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2615 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1465.0.html) (Dev. MPC-BE)

[alexins]

how to receive the Activation code from mpc-next.ru,i used hotmail and gmail,but nothing.

there were problems with the smtp server, at the moment the problem is solved.

[Zulithe]

Thanks, I will continue to evaluate new builds. I do have one item of feedback though: I noticed that when holding down left-click to drag the seek bar, it won't seek videos until I release the mouse button. Any plans to alter this behavior to match MPCHC? I use MadVR and LAV.

[insolo]

there were problems with the smtp server, at the moment the problem is solved.

thanks,I receive it!

[Reino]

During the last 12 seconds of a Youtube movie (link directly opened in MPC-BE), cpu utilization climbs to 100% and eventually the player freezes. I have to manually close the exe.
It appears to be a player issue, because it happens with all combinations of filters/renderers.
I've narrowed it down to rev.2443 and rev.2454 (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=2454&er=2443&max=40&search=), where everything is still ok with rev.2443.

[alexins]

MPC-BE v1.1.1.0 -dev build 2642 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2642/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2642 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1472.0.html) (Dev. MPC-BE)


During the last 12 seconds of a Youtube movie (link directly opened in MPC-BE), cpu utilization climbs to 100% and eventually the player freezes. I have to manually close the exe.
It appears to be a player issue, because it happens with all combinations of filters/renderers.
I've narrowed it down to rev.2443 and rev.2454 (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=2454&er=2443&max=40&search=), where everything is still ok with rev.2443.

In the settings which mode is used to open links, "Internal" or "File Source"? What video is played *.flv (SD) or *.mp4 (HD)?

[Reino]

Internal
FLV@360p:
__- freeze
__- correct duration
FLV@480p:
__- freeze
__- correct duration
WebM@360/480/720p:
__- no freeze
__- wrong duration.
__Video is 29sec for instance. All FLV freeze at 16sec, than that's the reported duration for all WebM.
__- Although the duration is wrong, it does play to the end. Some videos do however start over after a random amount of time the first time, but play to the end the 2nd time.
__(Btw, when 720p isn't available, instead of falling back at WebM@480p, WebM@720p falls back at FLV@480p!)
MP4@360p:
__- no freeze
__- correct duration
MP4@720p:
__- no freeze
__- correct duration
__- Videos start over after a random amount of time the first time, but play to the end the 2nd time. Audio is lost the 2nd time (1st itteration) though!

File Source
All formats:
__- Everything fine. No playback issues.

[Aleksoid1978]

Internal
FLV@360p:
__- freeze
__- correct duration
FLV@480p:
__- freeze
__- correct duration
WebM@360/480/720p:
__- no freeze
__- wrong duration.
__Video is 29sec for instance. All FLV freeze at 16sec, than that's the reported duration for all WebM.
__- Although the duration is wrong, it does play to the end. Some videos do however start over after a random amount of time the first time, but play to the end the 2nd time.
__(Btw, when 720p isn't available, instead of falling back at WebM@480p, WebM@720p falls back at FLV@480p!)
MP4@360p:
__- no freeze
__- correct duration
MP4@720p:
__- no freeze
__- correct duration
__- Videos start over after a random amount of time the first time, but play to the end the 2nd time. Audio is lost the 2nd time (1st itteration) though!

File Source
All formats:
__- Everything fine. No playback issues.

It's happened on ALL youtube clips or some times ??

P.S. what filter/source you use ? Can made & upload a screen-shot.
I use only internal source/filters - all ok, on any format. The only thing - when the speed of the internet is not enough, then begins to slow down

[Reino]

...because it happens with all combinations of filters/renderers.I have to admit, by this I meant all sorts of decoders/renderers and these were all connected to LAV Splitter. When I enable the internal FLV and MP4 Splitter, I can actually see MPC FLV/MP4 Source (Internal) or File Source (URL) --> MPC FLV/MP4 Splitter (File Source) being loaded, but in case of LAV, and no matter the Youtube-settings, it's always File Source (URL) --> LAV Splitter and never LAV Splitter Source.
It seems to be a LAV issue, because the issues I described with the Youtube-settings at Internal only happen with LAV. No problems with the internal splitter filters at all. But then again, MPC-BE rev.2443 with Youtube-settings at Internal + LAV doesn't have these issues... so who's to blame?

[alexins]

Release Candidate of Visual Studio 2012 Update 3 now available (http://support.microsoft.com/kb/2835600)

A fix for ATL & MFC XP targeting is included. This fix addresses the following scenario:
You create a C++ Win32 Console Application project in Visual Studio 2012 Update 2.
You select both ATL and MFC in the application wizard.
You change the Platform Toolset option to v110_xp, and you change Use of MFC and ATL to Static in the project Property Pages.
You run the application on a computer that is running Windows XP or Windows Server 2003.
You receive the following error message:
Application Name - Entry Point Not Found

The procedure entry point InitializeCriticalSectionEx could not be located in the dynamic link library KERNEL32.dll

[therock003]

In the filetype association options page, what does the option icons do? I want to associate some filetypes, but i want to have the default windos 8 icon showing up. I didnt check the icons box, but still i have the mpc icon on all my video files now.

[v0lt]

In the filetype association options page, what does the option icons do?
Uses icons from the mpciconlib.dll.

[therock003]

And Which icons are those in that file? Can i edit it and add my one, or set it to use the widnows default icons instead, but keep the association?

[dukestravels07]

Quite impressed with this. My GPU was usually around 50 to 60% usage. With this its about 18% max on DXVA
Does your build auto upscale dvd content or do I need to look at some settings. Thanks!

[Aleksoid1978]

In the filetype association options page, what does the option icons do? I want to associate some filetypes, but i want to have the default windos 8 icon showing up. I didnt check the icons box, but still i have the mpc icon on all my video files now.

At default - when program associate file types it set self icon. As you do not check "With icon" - set default MPC-BE icon.

[therock003]

Do you mean that it will have the icon of the application?

[alexins]

MPC-BE v1.1.1.0 -dev build 2666 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2666/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2666 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1493.0.html) (Dev. MPC-BE)

[giannifante]

Hello,
a question about the comment on commit 2652 (google translated): "Change: function to get versions of the system, as well as IsW64 () ruled in a separate file. Just optimization - now the data is cached, so the function call to obtain the release occurs only once, on the first call."
Does it affect portability of MPC-BE? I use MPC-BE without installation and move the same program (simply zipping the mpc folder) in different PCs (both 32 and 64)... where is this information cached? It is sufficient to delete .ini file to force MPC to get the OS version again?
Thx for help

[Brother John]

I’m wondering, when the “remember dvd position” and “remember file position” options are enabled, is there a way to force playback from the beginning? I expected the two start position cli arguments
mpc-be movie.mkv /start 0
mpc-be movie.mkv /startpos 00:00:00
to work as an override. But the movie still starts from the remembered position.

P.S.: MPC-BE 32bit 1.1.1.0 build 2574

[wanezhiling]

http://pan.baidu.com/share/link?shareid=476175&uk=3558042035
blackscreen.

ps: disable Reindex broken files in AVI Splitter configuration, then it works.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=476175&uk=3558042035
blackscreen.

ps: disable Reindex broken files in AVI Splitter configuration, then it works.

Fixed.

[Aleksoid1978]

I’m wondering, when the “remember dvd position” and “remember file position” options are enabled, is there a way to force playback from the beginning? I expected the two start position cli arguments
mpc-be movie.mkv /start 0
mpc-be movie.mkv /startpos 00:00:00
to work as an override. But the movie still starts from the remembered position.

P.S.: MPC-BE 32bit 1.1.1.0 build 2574

Fixed at rev. 2690;

[Lord Maius]

ITA txt language file updated rev. 2692

http://sdrv.ms/14hyVt8

[wanezhiling]

External mkv splitters (not source) cannot be used in build 2670.

[alexins]

ITA txt language file updated rev. 2692

http://sdrv.ms/14hyVt8

:thanks:

added to rev.2698 (http://svnlog.mpc-next.ru/revision.php?repname=MPC-BE+Team&peg=2697&rev=2698)

MPC-BE v1.1.1.0 -dev build 2697 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2697/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2697 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1507.0.html) (Dev. MPC-BE)

[Aleksoid1978]

External mkv splitters (not source) cannot be used in build 2670.

All ok for me.

[wanezhiling]

http://pan.baidu.com/share/link?shareid=480661&uk=3558042035
Jump to 6:30 and later, mpc-be reverts to the beginning.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=480661&uk=3558042035
Jump to 6:30 and later, mpc-be reverts to the beginning.

First - it's not a .MKV? it's a .FLV :)
About seeking - i see.

Fixed at rev. 2703;

[wanezhiling]

http://i.imgur.com/jl3lwLF.png
No effect in vmr9 renderless mode, same is mpc-hc.

[Aleksoid1978]

http://i.imgur.com/jl3lwLF.png
No effect in vmr9 renderless mode, same is mpc-hc.

Using IVMRMixerControl9::SetProcAmpControl() return VFW_E_VMR_NO_PROCAMP_HW - The graphics hardware does not support ProcAmp controls.

[wanezhiling]

Your 660ti and 7750 support?

Here, works fine in evr and madVR, but not in vmr9

[nevcairiel]

For this to work in VMR9, you have to turn off DXVA and enable VMR Mixing Mode, iirc.

[kasper93]

Using IVMRMixerControl9::SetProcAmpControl() return VFW_E_VMR_NO_PROCAMP_HW - The graphics hardware does not support ProcAmp controls.

Exactly. I have looked at this yesterday. Funny thing is that when you uncheck DXVA decoder in settings it work fine. Even if in both cases DXVA is not used.

[wanezhiling]

Funny thing is that when you uncheck DXVA decoder in settings it work fine. Even if in both cases DXVA is not used.
yes, same here.

so it should be a logic bug.

[wanezhiling]

http://i.imgur.com/vYAncpP.png
More funny thing, ms dxva + vmr9, works fine. :D

[Brother John]

Fixed at rev. 2690;
Thank you. The start position cli parameters work perfectly now.

[wanezhiling]

http://www.sendspace.com/file/op9cz6

lav s + mpc be v default = 4:3
lav s + lav v default = 4:3
mpcbe s + mpc be v default = 4:3
mpcbe s + lav v default = 3:2

[Aleksoid1978]

http://www.sendspace.com/file/op9cz6

lav s + mpc be v default = 4:3
lav s + lav v default = 4:3
mpcbe s + mpc be v default = 4:3
mpcbe s + lav v default = 3:2

LAV Video decoder do not trust MPC MP4/MOV Splitter :) and do not read AR info from splitter.

[sheppaul]

LAV Video decoder do not trust MPC MP4/MOV Splitter

Well, is this some kind of joke? :o

[Keiyakusha]

mpcbe s + lav v default = 3:2
This is correct. 3:2 is what it should be. Yes it doesn't looks right because your video stream is broken and contains wrong sar.
Yes I don't think that container info should be preferred over stream info. People should learn how to encode properly to begin with.

[Reino]

While I don't have any problems with MPC-HC, with MPC-BE I can't play certain WMV[WMV3+WMA9]-files, like Step_into_Liquid_1080.wmv (http://download.microsoft.com/download/e/a/d/eadb9b42-728b-42b0-bfdf-b472fa2a2464/Step_into_Liquid_1080.exe) (wmv-file in self-extracting archive exe-file).

My findings
Rev.2413-2734: Opens (DXVA), but won't play. Stays at 0:00.
Rev.2395: Opens (software), but won't play.
Rev.2364-2387: Crashes upon opening.
Rev.2280-2352: Opens, but wrong aspect ratio and distorted image.
Rev.xxxx-2264: Everything fine (except for occasional image distortion (http://www.ld-host.de/uploads/images/8c98e859e6dc9c344cc11e6b64518753.jpg), just like latest MPC-HC still now)

I have no problems with Step_into_Liquid_720.wmv though.

AMD Athlon XP 3200+ (so no SSE2)
ATI Radeon HD 3850 AGP
WinXP Pro SP3

[Aleksoid1978]

While I don't have any problems with MPC-HC, with MPC-BE I can't play certain WMV[WMV3+WMA9]-files, like Step_into_Liquid_1080.wmv (http://download.microsoft.com/download/e/a/d/eadb9b42-728b-42b0-bfdf-b472fa2a2464/Step_into_Liquid_1080.exe) (wmv-file in self-extracting archive exe-file).

My findings
Rev.2413-2734: Opens (DXVA), but won't play. Stays at 0:00.
Rev.2395: Opens (software), but won't play.
Rev.2364-2387: Crashes upon opening.
Rev.2280-2352: Opens, but wrong aspect ratio and distorted image.
Rev.xxxx-2264: Everything fine (except for occasional image distortion (http://www.ld-host.de/uploads/images/8c98e859e6dc9c344cc11e6b64518753.jpg), just like latest MPC-HC still now)

I have no problems with Step_into_Liquid_720.wmv though.

AMD Athlon XP 3200+ (so no SSE2)
ATI Radeon HD 3850 AGP
WinXP Pro SP3


Sorry - i do not have WinXP and can't test.

[wanezhiling]

Sorry - i do not have WinXP and can't test.

Even on win7/8, mpc-be/hc have dxva issue with that wmv on all GPUs.

I cut a small clip. http://www.sendspace.com/file/b5zpw2

[wanezhiling]

On XP, latest mpc-hc plays though has same dxva issue, while mpc-be just stays at 0:00. :)

Tested several dxva decoders on win7/8, its mpc ONLY issue. :)

[Aleksoid1978]

On XP, latest mpc-hc plays though has same dxva issue, while mpc-be just stays at 0:00. :)

Tested several dxva decoders on win7/8, its mpc ONLY issue. :)

Try this builds
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_VC1_WMV_DXVA(1).7z

http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_VC1_WMV_DXVA(2).7z

[wanezhiling]

dxva1 build on xp: no changes..

dxva2 build on 7/8: ok

[Aleksoid1978]

dxva1 build on xp: no changes..

dxva2 build on 7/8: ok

On WinXP - do not start and black screen ??

[wanezhiling]

right

[Aleksoid1978]

Well - no luck WinXP :)

[Aleksoid1978]

Please try on this build http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug.7z
In archive - Dbgview.exe. What need - first run Dbgview.exe, then mpc-be.exe and open file for playback. Close mpc-be.exe. And then - save log from Dbgview.exe and upload for me.

[wanezhiling]

Open that wmv file, mpc-be crashed...

well log file has been sent.

[Aleksoid1978]

Open that wmv file, mpc-be crashed...

well log file has been sent.

Another try - http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug_2.7z :)

[wanezhiling]

crash still

[Aleksoid1978]

crash still

You use VMR7 ?? If yes - try with another render.

[wanezhiling]

because i reset setting :p

try vmr9 overlay, no difference, crash as well.

[Aleksoid1978]

because i reset setting :p

try vmr9 overlay, no difference, crash as well.

In software decoding work ??

[wanezhiling]

Crash with all filters, maybe my crap XPs fault.

You'd better ask other xp users to test.

[Aleksoid1978]

Crash with all filters, maybe my crap XPs fault.

You'd better ask other xp users to test.

Crash with any Video decoders ??

P.S. Try this build - http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug_3.7z

[wanezhiling]

crash with all ds filters and all files. :p

[Aleksoid1978]

crash with all ds filters and all files. :p

What about MPC-HC ??

[wanezhiling]

What about MPC-HC ??
http://forum.doom9.org/showpost.php?p=1629250&postcount=1088
On XP, latest mpc-hc 7287 plays though has same dxva issue

http://i.imgur.com/qdkm7Iu.png

[Aleksoid1978]

Try this - http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug_4.7z

[wanezhiling]

I am at home now, no xp here. :)

Let CoRoNe test it. :p

[Reino]

mpc-be.exe_VC1_WMV_DXVA(1).7z: Opens (DXVA), but won't play.
mpc-be.exe_VC1_WMV_DXVA(2).7z: Opens (DXVA), but won't play.
DXVA_WMV_Debug.7z: mpc-be.exe crashes immediately.
DXVA_WMV_Debug_2.7z: same.
DXVA_WMV_Debug_3.7z: same.

As MPC-HC doesn't have this issue, I'd say between Rev.2264 and Rev.2280 lies the problem.


DXVA_WMV_Debug_4.7z: mpc-be.exe crashes immediately.

[wanezhiling]

:p I am happy that my crappy working XP is not so crappy.

[Aleksoid1978]

Test this - http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug_5.7z
Also test in software mode.

[Reino]

I don't even get to testing, because this one also immediately crashes when I double-click it. "An attempt was made to execute an illegal instruction. (0xc000001d) occurred in the application at location 0x01b56e8c." to be exact.

[Aleksoid1978]

I don't even get to testing, because this one also immediately crashes when I double-click it. "An attempt was made to execute an illegal instruction. (0xc000001d) occurred in the application at location 0x01b56e8c." to be exact.

Ok - i rebuild with VS2010 and upload again.

P.S. http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug_6.7z also please upload a log from Dbgview.exe - http://aleksoid.voserver.net/MPC-BE/Dbgview.exe.7z
But remember - Dbgview.exe run before run mpc-be.exe

[Reino]

Dbgview-logfile (http://www.degeelebosch.nl/reino/CORONE.7z)

Not only with Step_into_Liquid_1080.wmv, but with every file I open, the player crashes: "The instruction at "0xcdcdcdcd" referenced memory at "0xcdcdcdcd". The memory could not be "read"." (might even be my aging physical memory failing, I don't know, because it happens more often).
But funny enough, although the crash-message comes up, the video starts playing. Aspect ratio is wrong (4:3 instead of 16:9), but I haven't seen image distortion! :)

[Aleksoid1978]

Try please this build. There is no DbgView log need :)
http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_1.7z

[Reino]

PER-FECT! No more crashes, and wmv-files play fine without image distortion! Thanks alot for your effort!

[Aleksoid1978]

PER-FECT! No more crashes, and wmv-files play fine without image distortion! Thanks alot for your effort!

Aspect Ratio is right ??

[wanezhiling]

right

[Reino]

Just downloaded Rev.2753; WMV-fix merged, problem solved (including the aspect ratio, yes). Thank you!

[VipZ]

Bit of a feature request.

It would be great if the seek preview option had an extra option which would disable if used on DVD/Bluray etc as multiple seeks and disk playback don't work so well together.

[Aleksoid1978]

Hi all. Please test this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer.7z

Need a test internal MPC Audio Renderer + WASAPI + Shared Mode. I did a software volume control for WASAPI mode.
Please check the quality of the sound when adjusting volume, seeking, etc.

P.S. duplicate link http://rghost.ru/46170210

[wanezhiling]

Hi all. Please test this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer.7z

http://pan.baidu.com/share/link?shareid=492628&uk=3558042035
:)

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=492628&uk=3558042035
:)

What ??

[wanezhiling]

You didn't encounter mute and seeking-noise problems? :)

[Aleksoid1978]

You didn't encounter mute and seeking-noise problems? :)

What problem on mute ??

P.S. Updated build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_2.7z

Another build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_3.7z

[wiak]

playing video file from a network share/drive and the network device loses connection, it just pauses the video and nothing happends, please make it so that mpc-be just pause the video and checks if the file is back to resume
atm it does not do that

[Aleksoid1978]

New build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_4.7z
Please test MPC Audio Renderer + Exclusive/Shared mode. Bitstream must work now.

[VipZ]

New build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_4.7z
Please test MPC Audio Renderer + Exclusive/Shared mode. Bitstream must work now.

Thanks, I am guessing this is not yet in SVN? Any chance for a x64 build.

Will test later.

[eriolssi]

Ok, that helped a bit. Now I can see the green bar as long as I don't close the player. If I close and start the player again it doesn't work anymore. I can make it appear again by opening options and pressing 'OK' but it disappears again if I restart the player. Also, the playback controls in the 'Peek preview' box aren't working (they are showing but pressing them doesn't do anything).

Hi, I CAN reproduce this problem - exactly the same thing is happening to me.
Furthermore: If I ran MPC directly from Windows, Explorer, etc. its OKAY. Only if I open media files via Total Commander (8.01, x64, as Administrator), then there is no taskbar feature, until manual unchecking and checking in Options, Tweaks. Situation repeats after every exit and re-run..
Can you look at it please?
Thank you, Paul

[VipZ]

Here's some initial results from the Audio renderer assuming SVN 2771 has all the updates.

Bitsteaming
DTS-HD HR/MA crash in both Shared and exclusive
DD+ is out of sync
AC3/DTS/TrueHD all seem good in both shared and exclusive

Does exclusive require 16bit input and fail to connect with any other inputs? Also there is the rare crash on opening a media file and when attempting again normally works.

Seeking with shared mode seems to stutter for about 1 second before recovering, exclusive doesn't seem to have this issue or is to short to notice.

[Aleksoid1978]

Here's some initial results from the Audio renderer assuming SVN 2771 has all the updates.

Bitsteaming
DTS-HD HR/MA crash in both Shared and exclusive
DD+ is out of sync
AC3/DTS/TrueHD all seem good in both shared and exclusive

Does exclusive require 16bit input and fail to connect with any other inputs? Also there is the rare crash on opening a media file and when attempting again normally works.

Seeking with shared mode seems to stutter for about 1 second before recovering, exclusive doesn't seem to have this issue or is to short to notice.

You test my build or SVN version ??

[VipZ]

You test my build or SVN version ??

Tested SVN 2771 thinking that u made the changes in 2765, or was it a bad assumption?

[Aleksoid1978]

Tested SVN 2771 thinking that u made the changes in 2765, or was it a bad assumption?

No - need a test only http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_4.7z

[mindbomb]

only test bitstreaming, or can we comment on other things?
For me shared mode is working pretty well, but I don't understand the benefit of shared mode over directsound.
Exclusive mode has problems for me. Everything is being played back in slow motion. Tried mono, 5.1, 16 bit, 24 bit, 32 float.
This is on a xonar dg sound card.

[wanezhiling]

http://pan.baidu.com/share/link?shareid=496924&uk=3558042035
Noise.

Works fine with LAV Splitter

[VipZ]

No - need a test only http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_4.7z

Ok my bad, will get x86 LAV installed etc so I can test this build

Results,
All bitstreaming seems ok in both shared and exclusive, DD+ seems to get out of sync in shared easily. Sound seems kick in slower than DirectShow.

Seeking still stutters on decoded playback in shared mode.

This build is an improvement over current SVN

[therock003]

Quick Question. Is the ALT+X shortcut to exit MPC any different from the usual ALT+F4? Any reason its there?

[wanezhiling]

http://pan.baidu.com/share/link?shareid=499314&uk=3558042035
Cant display the subtitle

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=499314&uk=3558042035
Cant display the subtitle

Subtitle that do not show - packet have broken timestamp, rtstart = rtstop, there is no time to show.

[wanezhiling]

Damn those stupid subtitle makers...

Thanks:)

[therock003]

Is there a switch i can add to a video shortcut, so that when it launches it will play on repeat? I saw some command line switches but i could not see one for repeat...

[alexins]

MPC-BE v1.1.1.0 -dev build 2797 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2797/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2797 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1532.0.html) (Dev. MPC-BE)

[SamKook]

I've encountered a few problems with youtube video on build 2797 that weren't there in the last build I used (2241), both on x86.

Using windows 7 x64 and the latest LAV + MadVR with the internal source setting for youtube(haven't tested the file source yet or any other combination of renderer/codecs)

-It can't play links that have extra parameters. For example http://www.youtube.com/watch?v=wMvPyMh_oto&list=PL0A25EAE6C2CA3C36&index=147 won't start but http://www.youtube.com/watch?v=wMvPyMh_oto will. With 2241 it worked on this particular combination 95% of the time but failed with some other parameters like the embedded player one so it would be nice if it could detect the "v" parameter(and maybe other helpful ones if there are any) and only use it/them.

-It will not stop at the end of playback, it always say playing in the status bar, unless you manually pause or stop it.

-Trying to load a second video after the end of another one(or while it's still playing/loading) without closing the player will make mpc-be become unresponsive and will crash if you click on the window a few times.

Edit: After a bit more testing, it seems the playback not stopping and no second video will load + crash was only when using LAV, it works fine with the internal decoders.

[Aleksoid1978]

-It can't play links that have extra parameters. For example http://www.youtube.com/watch?v=wMvPyMh_oto&list=PL0A25EAE6C2CA3C36&index=147 won't start

Thanks. Fixed.

[Aleksoid1978]

I
After a bit more testing, it seems the playback not stopping and no second video will load + crash was due to LAV, it works fine with the internal decoders.

I do not understand - can you make a video from you screen with it's bug ??

[Aleksoid1978]

-It will not stop at the end of playback, it always say playing in the status bar, unless you manually pause or stop it.

-Trying to load a second video after the end of another one(or while it's still playing/loading) without closing the player will make mpc-be become unresponsive and will crash if you click on the window a few times.


Can't reproduce.

[Aleksoid1978]

Please test WASAPI Exclusive & Bitstream
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_9.7z

[SamKook]

I do not understand - can you make a video from you screen with it's bug ??
This was only to say the the 2 errors you can't reproduce only occurred with LAVfilters.

Can't reproduce.
Me neither apparently, it did it 3 times in a row with 30+ min video(like the one I used to provide an example for the first bug), but hasn't happened with the short ones I used to try and reproduce it.

Please test WASAPI Exclusive & Bitstream
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_9.7z
Will do, at least for the WASAPI part since I don't have any receiver to bitstream to.

[SamKook]

After a bit of testing before going to sleep, WASAPI exclusive works without any problems if I output the sound to my tv speakers via my graphic card through a dvi->hdmi cable, but it won't play at all on my Xonar D1 to my headphones(and I use reclock's WASAPI exclusive with it all the time without problem).
The video won't even start to play most of the time with the Xonar, it always switch back to stopped and when it manage to start, there's no sound at all.

I tried with a combination of LAV, madvr, internal filters and EVR custom with audio from mp3 stereo to dts 5.1 all with the same result.


Don't know if the youtube fix is in it, but pasting the youtube link from a playlist that I provided earlier work in this build, but it actually load the very first video of the playlist instead of the right one which work fine if I remove the extra parameters manually.

[Aleksoid1978]

Will do, at least for the WASAPI part since I don't have any receiver to bitstream to.

You can test without Bitstream/Receiver. Just select MCP Audio Renderer and in it's options select Exclusive/Shared mode. And - see movie :)

[Aleksoid1978]

After a bit of testing before going to sleep, WASAPI exclusive works without any problems if I output the sound to my tv speakers via my graphic card through a dvi->hdmi cable, but it won't play at all on my Xonar D1 to my headphones(and I use reclock's WASAPI exclusive with it all the time without problem).
The video won't even start to play most of the time with the Xonar, it always switch back to stopped and when it manage to start, there's no sound at all.

I tried with a combination of LAV, madvr, internal filters and EVR custom with audio from mp3 stereo to dts 5.1 all with the same result.


Don't know if the youtube fix is in it, but pasting the youtube link from a playlist that I provided earlier work in this build, but it actually load the very first video of the playlist instead of the right one which work fine if I remove the extra parameters manually.

Can you test WASAPI on Debug build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_9_Debug.7z

Before run mpc-be.exe - run DbgView.exe http://aleksoid.voserver.net/MPC-BE/Dbgview.exe.7z
and then upload a log from Dbgview.exe

Maybe i understand what's wrong on Xonar D1

[SamKook]

You can test without Bitstream/Receiver. Just select MCP Audio Renderer and in it's options select Exclusive/Shared mode. And - see movie :)

I know and that's what I did. Only tried the exclusive mode though.

[SamKook]

I started mpc-be, dragged and dropped a video on it(a mkv with h264 and DTS 5.1) and after it failed to start, I tried pressing play again which also failed.

Here's the log: http://www.mediafire.com/?961jn44s3dniorb

[Aleksoid1978]

I started mpc-be, dragged and dropped a video on it(a mkv with h264 and DTS 5.1) and after it failed to start, I tried pressing play again which also failed.

Here's the log: http://www.mediafire.com/?961jn44s3dniorb

Thanks.

[Aleksoid1978]

I started mpc-be, dragged and dropped a video on it(a mkv with h264 and DTS 5.1) and after it failed to start, I tried pressing play again which also failed.

Here's the log: http://www.mediafire.com/?961jn44s3dniorb

http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_15.7z (http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_11.7z)
Debug - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_15_Debug.7z (http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_MPC_Audio_Renderer_11_Debug.7z)

[SamKook]

Did a quick test and this one is working fine so far.

The links are wrong though, they point to v11 which doesn't exist instead of 15.

[mindbomb]

so, how does mpc audio renderer know what formats are supported by the audio device?
For example, my laptop only supports stereo input, how does mpc audio renderer know to downmix to stereo?

[Lord Maius]

ITA txt language file updated rev.2788

http://sdrv.ms/110JEnR

[alexins]

ITA txt language file updated rev.2788

http://sdrv.ms/110JEnR

OK! Thank you!
Added in rev.2811 (http://svnlog.mpc-next.ru/revision.php?repname=MPC-BE+Team&rev=2811)

[Aleksoid1978]

so, how does mpc audio renderer know what formats are supported by the audio device?
For example, my laptop only supports stereo input, how does mpc audio renderer know to downmix to stereo?

Queries the audio device for the supported format and mix input data if need.

P.S. rev.2812 - i added "Status" in setting, it's show input & output format.

[SamKook]

-It will not stop at the end of playback, it always say playing in the status bar, unless you manually pause or stop it.

-Trying to load a second video after the end of another one(or while it's still playing/loading) without closing the player will make mpc-be become unresponsive and will crash if you click on the window a few times.

Did some more watching/testing of youtube videos and I figured out that those two problems are always happening only with LAV's flv splitter. It works perfectly fine with LAV's mp4 splitter which I guess is why you couldn't reproduce it.


Also, just in case you missed it(I also rephrased it a bit) when I talked about the WASAPI build:
Don't know if the youtube link argument fix is in it, but pasting a youtube link from a playlist load the very first video of the playlist instead of the actual one from the link, but it will play fine if I remove the extra parameters manually like I did before.

[Aleksoid1978]

Yes - for Youtube, parse &index in url is not supported ... i hope yet :)

P.S. youtube.com do not support &index tag.

[mindbomb]

Queries the audio device for the supported format and mix input data if need.

P.S. rev.2812 - i added "Status" in setting, it's show input & output format.

Nice, though Status is showing 24 bit as 32 bit int for output.

[Aleksoid1978]

Nice, though Status is showing 24 bit as 32 bit int for output.

For Exclusive - all right. In Audio Control Panel set 24bit 48000, but real is 32bit 48000.

For 16bit - 16bit.

For Shared Mode - always is 32 bit float.

[Mercury_22]

Can you please backport the latest DVB changes from MPC-HC cause they've enabled DVB-C support (at least in my case) ?

[Aleksoid1978]

Can you please backport the latest DVB changes from MPC-HC cause they've enabled DVB-C support (at least in my case) ?

No. I don't have DVB card and can't test.

[ryrynz]

Mercury22 can test, it's obviously working fine in MPC-HC for him so why not just backport it?

[Aleksoid1978]

Mercury22 can test, it's obviously working fine in MPC-HC for him so why not just backport it?

I can't coding & port change(many changes) without testing myself

[ryrynz]

You guys haven't touched the DVB code from HC have you? Wouldn't it "just work"? HC is usually quite stable with changes in DVB area, perhaps make a test build for Mercury22 and then if he says it's good
you could get one of the beta testers to test to your liking so it can be committed later?

[Aleksoid1978]

You guys haven't touched the DVB code from HC have you? Wouldn't it "just work"? HC is usually quite stable with changes in DVB area, perhaps make a test build for Mercury22 and then if he says it's good
you could get one of the beta testers to test to your liking so it can be committed later?

Yes - we haven't touched the DVB code from MPC-HC, because have no DVB card ...

Need DVB support - use MPC-HC or DVB viewer

[mindbomb]

are you guys aware of a bug where the mpc-be process remains after the player has been closed?

I believe mpc-hc may have had the same issue and had it fixed recently - https://github.com/mpc-hc/mpc-hc/commit/9c5bdfe645a41622e6fd4bfa471ff55014a62e30

[Aleksoid1978]

are you guys aware of a bug where the mpc-be process remains after the player has been closed?

I believe mpc-hc may have had the same issue and had it fixed recently - https://github.com/mpc-hc/mpc-hc/commit/9c5bdfe645a41622e6fd4bfa471ff55014a62e30

in MPC-BE it's bug a present ?? I do not have same bug.

[mindbomb]

I think it happened to me.
I'll double check and get back to you.

[wanezhiling]

http://pan.baidu.com/share/link?shareid=464202&uk=2302073050
Cant load these .sup

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=464202&uk=2302073050
Cant load these .sup

It's not .sup - it's a matroska + PGS subtitle inside :)
Load external "matroska + subtitle" as external subtitle do not supported.

[mrhuge]

Sorry for ignorant question, but ... I see discussion of v1.1.3 from January, but now it looks like the latest version is v1.1.1. Are they different branches or different levels of stability? Why should I choose one over the other?

(I'm using 1.1.1 now with no major problems, on a pretty slow/crusty W7 box)

[ryrynz]

1.1.1 is the dev version. Just grab the latest from the Sourceforge website (http://sourceforge.net/projects/mpcbe/)

I'm not sure that they'll be releasing a new "stable" any time soon.. there's not really any need when the dev build is so stable.

[ontherocks]

Following file doesn't play.
http://www.mediafire.com/download/qy7preap4sfdbag/6_channel_id.wav

[z_mashine]

Following file doesn't play.
http://www.mediafire.com/download/qy7preap4sfdbag/6_channel_id.wav

Channel positions are not set in this file and "Audio Switcher" can't connect. This file plays fine with "MPC Audio Renderer" and WASAPI mode.

[ceb]

1.1.1 is the dev version. Just grab the latest from the Sourceforge website (http://sourceforge.net/projects/mpcbe/)

I'm not sure that they'll be releasing a new "stable" any time soon.. there's not really any need when the dev build is so stable.
Like mrhuge I was using the latest stable version but after seeing your post I'll give the latest nightly a try (I used to do the same for MPC-HC).
Anyway I want to download the 64-bit version but there is one compiled in Visual Studio 2010 and one in 2012, what is the difference?

Also if I enable the option "Replace file name with title" it uses the title and year in the case of mp3 files, i.e. "Dazed and Confused (1969)"; is there a way to change it to "Led Zeppelin - Dazed and Confused"?

[ryrynz]

Anyway I want to download the 64-bit version but there is one compiled in Visual Studio 2010 and one in 2012, what is the difference?

Not much really. VS2012 is the newer compiler, it's generated executable is a little larger than the VS2010 version.
There may be slight differences in performance between the two but it won't be noticeable. Either is fine, I'm aware of no drawbacks to using the VS2012 version now, so unless someone can come up with a reason not to use it, I'd prefer that.

[ontherocks]

Channel positions are not set in this file and "Audio Switcher" can't connect. This file plays fine with "MPC Audio Renderer" and WASAPI mode.
That worked. Thanks :thanks:

The following files have issues:
1. http://www.sr.se/laddahem/multikanal/dts/ondpirat_dts.zip - No Audio
2. http://www.masterpinguin.de/surround/files/tracks/DTS_Hotel19dld.wav - Static Noise
3. http://www.sr.se/laddahem/multikanal/dts/opalcity.zip - Static Noise

[z_mashine]

1. http://www.sr.se/laddahem/multikanal/dts/ondpirat_dts.zip - No Audio

Plays fine by default.

3. http://www.sr.se/laddahem/multikanal/dts/opalcity.zip - Static Noise

Plays fine with LAV Splitter.

P.S. Where do you get these files?

[Reino]

ontherocks,
Track01.wav, DTS_Hotel19dld.wav and Opalcity.wav are all Wav[DTS]-files (Wav-container with a DTS audio-stream inside). They are badly encoded if you ask me though, because MediaInfo reports:
Audio
Format : DTS
Format/Info : Digital Theater Systems
Mode : 14
Format settings, Endianness : Little
Codec ID : 1
Duration : 5mn 53s
Bit rate mode : Constant
Bit rate : 0 bps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 59.4 MiB (100%)

unlike a perfectly working sample I made myself:
Audio
Format : DTS
Format/Info : Digital Theater Systems
Mode : 14
Format settings, Endianness : Little
Codec ID : 1
Duration : 25s 518ms
Bit rate mode : Constant
Bit rate : 1 411.2 Kbps
Channel(s) : 5 channels
Channel positions : Front: L C R, Side: L R
Sampling rate : 44.1 KHz
Bit depth : 24 bits
Compression mode : Lossy
Stream size : 4.29 MiB (100%)

LAV Filters can play Track01.wav and Opalcity.wav just fine, but there's something strange going on with DTS_Hotel19dld.wav (perhaps Aleksoid1978 and nevcairiel can have a look). Unlike the other 2 files, which LAV Splitter detects as "dts, 44100 Hz, 5.1, 1411 kb/s", LAV Splitter thinks this file is "pcm_s16le, 44100 Hz, 2 channels, s16, 1411 kb/s", eventhough MediaInfo reports the same weird numbers. Hence the white noise, because pcm doesn't need to be decoded.
Loading this file in GraphStudioNext showed me LAV Splitter and LAV Decoder are actually capable of decoding this file. "Preferring" LAV Audio Decoder in MPC-HC's "External Filters" setup also (temporarily) fixes it.

Aleksoid1978, for the internal source filter "DTS AudioCD", could you add support for "DTS AudioCD support with CDDA and WAV"? MPC-BE should be able to do this on her own, don't you think?

Slightly off-topic: Aleksoid1978, since your expertise in all this is much greater than mine, do you have any idea why DC-Bass Source Mod can connect with the FFDShow Audio Decoder, but can't connect with the internal DTS audio decoder or the LAV Audio Decoder?

[Aleksoid1978]

Slightly off-topic: Aleksoid1978, since your expertise in all this is much greater than mine, do you have any idea why DC-Bass Source Mod can connect with the FFDShow Audio Decoder, but can't connect with the internal DTS audio decoder or the LAV Audio Decoder?

I think that DC-Bass do not store extradata and MPC/LAV decoder check and do not connect.

[ceb]

Not much really. VS2012 is the newer compiler, it's generated executable is a little larger than the VS2010 version.
There may be slight differences in performance between the two but it won't be noticeable. Either is fine, I'm aware of no drawbacks to using the VS2012 version now, so unless someone can come up with a reason not to use it, I'd prefer that.
Thanks. :)

Also if I enable the option "Replace file name with title" it uses the title and year in the case of mp3 files, i.e. "Dazed and Confused (1969)"; is there a way to change it to "Led Zeppelin - Dazed and Confused"?
Is it possible?

[Aleksoid1978]

The following files have issues:
1. http://www.sr.se/laddahem/multikanal/dts/ondpirat_dts.zip - No Audio
2. http://www.masterpinguin.de/surround/files/tracks/DTS_Hotel19dld.wav - Static Noise
3. http://www.sr.se/laddahem/multikanal/dts/opalcity.zip - Static Noise

Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WAV_DTS.7z

Also - test on any other WAV & WAV_DTS.

[bozek]

well, it's been six months since the last stable build... come on, guys! :(

[olymind1]

Luckily i find almost all alpha builds as stable as stable builds. So far i didn't encounter with any bugs in rev.2855.

[ryrynz]

They're not "alpha" builds. Just nightly ones, it's the same with MPC-HC. These builds will generally be better than the stable release, each commit is usually tested beforehand.

[Reino]

Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WAV_DTS.7zWhat exactly have you changed, because I don't notice anything different.

[z_mashine]

I don't notice anything different.

Perhaps some of external filters connected. Those three files plays fine on this build for me.

[bozek]

They're not "alpha" builds. Just nightly ones, it's the same with MPC-HC. These builds will generally be better than the stable release, each commit is usually tested beforehand.

I can't install nightly builds on other people's computers. It's time to work out the most pressing kinks, try not to break anything in the process... pack it 'n' wrap it and call it stable.

[the_weirdo]

I also know some people who refuse to use nightly builds because they think they're less stable than "stable" release. MPC-BE devs should release a new stable build every three months or so, IMHO.

[ryrynz]

They'll just pick a nightly build and call it stable, honestly there's no difference here, MPC's code it not developed in such a way that the nightly builds are ever really considered unstable.

All that more experimental stuff get's done in separate branches and committed once it's deemed stable so just use the nightlies. However they need to release a "stable" build, I've asked this a couple of times now.

[Reino]

Perhaps some of external filters connected. Those three files plays fine on this build for me.I didn't notice any difference because I expected the Source Filter "DTS AudioCD" to have changed, but now I see it's actually "DTS/AC3" that's needed here. Then I'm wondering, in what scenario would you need "DTS AudioCD"?

Btw Aleksoid1978, I see you upgraded that test-build to v1.2.0.0. Major releases coming up? :)

[Aleksoid1978]

I didn't notice any difference because I expected the Source Filter "DTS AudioCD" to have changed, but now I see it's actually "DTS/AC3" that's needed here. Then I'm wondering, in what scenario would you need "DTS AudioCD"?

Btw Aleksoid1978, I see you upgraded that test-build to v1.2.0.0. Major releases coming up? :)

DTS AudioCD - it's for DTS AudioCD playback only. This file - is a DTS/WAV_DTS. We fixed a DTS/AC3 Source for normal parsing this(and other dts/dts_wav) files.

[Reino]

A physical AudioCD?

[ryrynz]

Yes.

http://en.wikipedia.org/wiki/5.1_Music_Disc

[v0lt]

MPC-BE v1.2.0.0 -dev build 2865 (http://dev.mpc-next.ru/index.php/topic,1560.msg8552.html#msg8552)

[ontherocks]

P.S. Where do you get these files?
I have a whole bunch of these various types of multichannel audio files, obtained by scouring through the internet. I used these long back to test my AVR's capabilities.

Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WAV_DTS.7z

Also - test on any other WAV & WAV_DTS.
Thanks for the build.

1. http://www.sr.se/laddahem/multikanal...dpirat_dts.zip - Still No Audio
2. http://www.masterpinguin.de/surround...Hotel19dld.wav - Plays fine
3. http://www.sr.se/laddahem/multikanal/dts/opalcity.zip - No Audio

I am not sure what settings am I missing, since it has been reported by z_mashine that all the 3 files play fine with this build.
PS: I do not use any external filters (and do not intend to use).

My settings:

http://imageshack.us/a/img15/817/00412062013075405.png

http://imageshack.us/a/img854/3051/00905062013023032.png

http://imageshack.us/a/img407/6153/00212062013074501.png

http://imageshack.us/a/img541/9964/01005062013023052.png

[Aleksoid1978]

I have a whole bunch of these various types of multichannel audio files, obtained by scouring through the internet. I used these long back to test my AVR's capabilities.


Thanks for the build.

1. http://www.sr.se/laddahem/multikanal...dpirat_dts.zip - Still No Audio
2. http://www.masterpinguin.de/surround...Hotel19dld.wav - Plays fine
3. http://www.sr.se/laddahem/multikanal/dts/opalcity.zip - No Audio

I am not sure what settings am I missing, since it has been reported by z_mashine that all the 3 files play fine with this build.
PS: I do not use any external filters (and do not intend to use).

My settings:

http://imageshack.us/a/img15/817/00412062013075405.png

http://imageshack.us/a/img854/3051/00905062013023032.png

http://imageshack.us/a/img407/6153/00212062013074501.png

http://imageshack.us/a/img541/9964/01005062013023052.png

1 - Try use audio renderer - System Default.
2 - make screenshot of filters on problem files.

you try this build - MPC-BE v1.2.0.0 -dev build 2865 (http://dev.mpc-next.ru/index.php/topic,1560.msg8552.html#msg8552) ??

[z_mashine]

I am not sure what settings am I missing, since it has been reported by z_mashine that all the 3 files play fine with this build.

I have no way to test bitstrimming. These files play fine for me on:

System Default
High Definition Device
DirectSound: High Definition Device
MPC Audio Renderer with System Default and High Definition Device

[ontherocks]

1 - Try use audio renderer - System Default.
I tried this. Did not solve the problem. Results are the same as previously mentioned.


2 - make screenshot of filters on problem files.
Sorry, didn't quite get what exactly you are looking for.
Do you mean for example the screenshot from Play-->Filters-->MPC Audio Renderer-->Pin Info/Status?


you try this build - MPC-BE v1.2.0.0 -dev build 2865 (http://dev.mpc-next.ru/index.php/topic,1560.msg8552.html#msg8552) ??
I tried this too. Did not solve the problem. Results are the same as previously mentioned.

[Lord Maius]

Updated Italian text translation --> Rev 2871
http://sdrv.ms/13DEctW
:)

[Reino]

ontherocks, just to be sure, you do have the internal DTS Audio Decoder enabled, haven't you?
DTS_Hotel19dld.wav plays fine over here with the internal DTS/AC3 Source Filter + internal DTS Audio Decoder / FFDShow / LAV.

[mindbomb]

http://thumbnails102.imagebam.com/26005/370752260047852.jpg (http://www.imagebam.com/image/370752260047852)

I'm having trouble here trying to tell mpc be to open fullscreen on a second monitor. The setting keeps reverting back to the default value.

[Aleksoid1978]

ontherocks, just to be sure, you do have the internal DTS Audio Decoder enabled, haven't you?
DTS_Hotel19dld.wav plays fine over here with the internal DTS/AC3 Source Filter + internal DTS Audio Decoder / FFDShow / LAV.

I do not know what's wrong at you side. All 3 files play fine:
http://s57.radikal.ru/i155/1306/24/276def44a9d4t.jpg (http://radikal.ru/F/s57.radikal.ru/i155/1306/24/276def44a9d4.png.html)

http://s019.radikal.ru/i622/1306/9e/4224c2c99c69t.jpg (http://radikal.ru/F/s019.radikal.ru/i622/1306/9e/4224c2c99c69.png.html)

http://s019.radikal.ru/i611/1306/19/3497f7581c0et.jpg (http://radikal.ru/F/s019.radikal.ru/i611/1306/19/3497f7581c0e.png.html)

[ontherocks]

ontherocks, just to be sure, you do have the internal DTS Audio Decoder enabled, haven't you?
DTS_Hotel19dld.wav plays fine over here with the internal DTS/AC3 Source Filter + internal DTS Audio Decoder / FFDShow / LAV.

I have reported that DTS_Hotel19dld.wav plays fine. Please see this post http://forum.doom9.org/showpost.php?p=1632622&postcount=1200

[ontherocks]

I do not know what's wrong at you side. All 3 files play fine:

I will post screenshots with the 2 problematic files as you have shown.
Just to make sure......
The 2 problematic files do not produce any errors. They play like any other file, i.e. the play progresses. But there is no audio. It's silent. I cannot hear anything.

[wanezhiling]

@ontherocks, reset mpc-be

[ontherocks]

I do not know what's wrong at you side. All 3 files play fine:

Ok.
I found out what was causing the problem.
Its an issue with bitstreaming.
If I do not select (S/PDIF,HDMI) Passthrough for DTS then MPC BE decodes and sends out multichannel PCM to my AVR. I can hear the tracks.
But if I select Passthrough for DTS (i.e. prevent MPC BE from decoding), there is no audio from my AVR.

[Aleksoid1978]

Ok.
I found out what was causing the problem.
Its an issue with bitstreaming.
If I do not select (S/PDIF,HDMI) Passthrough for DTS then MPC BE decodes and sends out multichannel PCM to my AVR. I can hear the tracks.
But if I select Passthrough for DTS (i.e. prevent MPC BE from decoding), there is no audio from my AVR.

P.S. Fixed at rev. 2894.

[wanezhiling]

http://pan.baidu.com/share/link?shareid=1195382374&uk=3558042035
build 2881, stop playback since 4sec

lav splitter and mpc-hc work fine.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=1195382374&uk=3558042035
build 2881, stop playback since 4sec

lav splitter and mpc-hc work fine.

All ok:
http://s60.radikal.ru/i169/1306/4f/eb8187e80cfet.jpg (http://radikal.ru/F/s60.radikal.ru/i169/1306/4f/eb8187e80cfe.png.html)

[ontherocks]

P.S. Fixed at rev. 2894.

Wow! That was fast. :thanks:

[wanezhiling]

All ok:
http://s60.radikal.ru/i169/1306/4f/eb8187e80cfet.jpg (http://radikal.ru/F/s60.radikal.ru/i169/1306/4f/eb8187e80cfe.png.html)

I figured out why. DXVA is fine.

Please try internal sw mpeg2 decoder ;)

[Aleksoid1978]

I figured out why. DXVA is fine.
Please try internal sw mpeg2 decoder ;)

Ok - a see. Thanks for report :)

P.S. Fixed at rev. 2903;

[73ChargerFan]

alexins,
Can you edit the first post and add a link to nightly builds?
Thanks.

[alexins]

alexins,
Can you edit the first post and add a link to nightly builds?
Thanks.

I put the links to the "Nightly Builds" at the bottom of the first post.

[73ChargerFan]

Thanks, much easier! It took me 10 minutes to find earlier.
Great work everyone, I really like how BE is coming along.

[ontherocks]

Some more files having issues (I have bitstreaming enabled)

1. http://www.mediafire.com/watch/smqnuhjgxaf1841/test.m4a - Pauses automatically

2. http://www.hifistatement.info/download_petrocca/Deborahs_Theme_24-96.wav - Doesn't play

3. aif files don't play. I am not sure if they are supported. Example https://dl.dropboxusercontent.com/u/422157/MFTD/Deerhoof_MastersFromTheirDay%20Series_Sexy%20but%20Sparkly_48k.aif

4. Any file with sampling rate greater than 48kHz, is displayed in my AVR as 48kHz. I am not sure if I am missing any settings. Example http://www.rarewares.org/rja/Yes-Roundabout-MLP_24bit_96kHz_5.1.flac

5. 2 Channel files with sampling rate greater than 48kHz are displayed as Multichannel PCM 5.1 in my AVR. Example files could be obtained from here http://www.unipheyemusic.com/filetest.cfm

6. This file produces static noise sometimes, sometimes there is no audio and sometimes it plays fine. It produces issues normally when it is after another file in playlist and it starts to play after the first one has ended playing. http://trailers.apple.com/movies/independent/miss_conception/miss_conception_h1080p.mov

[Aleksoid1978]

Some more files having issues (I have bitstreaming enabled)

1. http://www.mediafire.com/watch/smqnuhjgxaf1841/test.m4a - Pauses automatically

2. http://www.hifistatement.info/download_petrocca/Deborahs_Theme_24-96.wav - Doesn't play

3. aif files don't play. I am not sure if they are supported. Example https://dl.dropboxusercontent.com/u/422157/MFTD/Deerhoof_MastersFromTheirDay%20Series_Sexy%20but%20Sparkly_48k.aif

4. Any file with sampling rate greater than 48kHz, is displayed in my AVR as 48kHz. I am not sure if I am missing any settings. Example http://www.rarewares.org/rja/Yes-Roundabout-MLP_24bit_96kHz_5.1.flac

5. 2 Channel files with sampling rate greater than 48kHz are displayed as Multichannel PCM 5.1 in my AVR. Example files could be obtained from here http://www.unipheyemusic.com/filetest.cfm

6. This file produces static noise sometimes, sometimes there is no audio and sometimes it plays fine. It produces issues normally when it is after another file in playlist and it starts to play after the first one has ended playing. http://trailers.apple.com/movies/independent/miss_conception/miss_conception_h1080p.mov

What audio renderer you use. See Filters list on playback.

P.S.
http://www.mediafire.com/watch/smqnuhjgxaf1841/test.m4a - LAV also failed.

for .aif - need install LAV. http://www.hifistatement.info/download_petrocca/Deborahs_Theme_24-96.wav - also. MPC-BE don't have internal splitter for aif/wav files.

[alexins]

Media Player Classic - BE 1.2.0.3 Win32 (Stable release):
Media Player Classic - BE 1.2.0.3 x86 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.2.0.3/MPC-BE.1.2.0.3.x86-installer.zip/download)
Media Player Classic - BE 1.2.0.3 x86 (portable) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.2.0.3/MPC-BE.1.2.0.3.x86.7z/download)
Standalone Filters Media Player Classic - BE 1.2.0.3 x86 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.2.0.3/standalone_filters-mpc-be.1.2.0.3.x86.7z/download)

Media Player Classic - BE 1.2.0.3 x64 (Stable release):
Media Player Classic - BE 1.2.0.3 x64 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.2.0.3/MPC-BE.1.2.0.3.x64-installer.zip/download)
Media Player Classic - BE 1.2.0.3. x64 (portable) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.2.0.3/MPC-BE.1.2.0.3.x64.7z/download)
Standalone Filters Media Player Classic - BE 1.2.0.3 x64 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.2.0.3/standalone_filters-mpc-be.1.2.0.3.x64.7z/download)

Source Code:
Media Player Classic - BE 1.2.0.3 Source Code (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Source%20Code/MPC-BE%201.2.0.3%20Source%20Code/MPC-BE%201.2.0.3%20Source%20Code.7z/download)

ChangeLog (http://www.xvidvideo.ru/logi-izmeneniy/changelog-media-player-classic-be-eng.html)

[wanezhiling]

:cool: stable version

[ontherocks]

What audio renderer you use. See Filters list on playback.
I am using System Default for Audio Renderer

4. http://www.rarewares.org/rja/Yes-Roundabout-MLP_24bit_96kHz_5.1.flac

http://imageshack.us/a/img833/1999/e7j1.png

5. 2 Channel high resolution files that show up as Multichannel PCM 5.1
(a). Sampling rate 96kHz, bit depth 24bit

http://imageshack.us/a/img842/1638/yli.png

(b). Sampling rate 192kHz, bit depth 24bit

http://imageshack.us/a/img37/8284/m0j.png

[filler56789]

VC1-I decoding without DXVA;

Interlaced VC-1 decoded thru software, finally? :eek:

[alexins]

VC1-I decoding without DXVA;

Interlaced VC-1 decoded thru software, finally? :eek:

Yes!

http://i038.radikal.ru/1306/f5/51b054507544t.jpg (http://radikal.ru/F/i038.radikal.ru/1306/f5/51b054507544.png.html)

[filler56789]

Yes!

http://i038.radikal.ru/1306/f5/51b054507544t.jpg (http://radikal.ru/F/i038.radikal.ru/1306/f5/51b054507544.png.html)

Thanks for confirming :eek: :) :) :)

Congratulations, and :thanks: again.

[Aleksoid1978]

I am using System Default for Audio Renderer

4. http://www.rarewares.org/rja/Yes-Roundabout-MLP_24bit_96kHz_5.1.flac

http://imageshack.us/a/img833/1999/e7j1.png

5. 2 Channel high resolution files that show up as Multichannel PCM 5.1
(a). Sampling rate 96kHz, bit depth 24bit

http://imageshack.us/a/img842/1638/yli.png

(b). Sampling rate 192kHz, bit depth 24bit

http://imageshack.us/a/img37/8284/m0j.png

Because Windows mix in format, that you set in Sound Settings. I think you settings is 5.1

[Aleksoid1978]

Hi fellas.
Please, test MPC Audio Renderer in WASAPI Exclusive mode.
What's done: in this test build, MPC Audio Renderer trying transmit data as is, without any changes (also it ignore system settings), in case if selected modes are supported in system.
For example:
we have: 5.1 24bit 48000

Decoder's output: 2.0 32bit 96000
Renderer's output: 2.0 32bit 96000

In this case we will have stereo only. And vice-versa:
we have: 2.0 24bit 96000

Decoder's output: 5.1 32bit 44100
Renderer's output: 5.1 32bit 44100

And again, only in case if your system is support such modes, if not - sound mixer will catch this up and you will see default behavior.
In case of success, bit-exact output will be performed from audio decoder to device.


P.S. - If something doesn't work - show me the screenshot of "Status" tab in MPC Audio Renderer preferences window.
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE.7z

[ontherocks]

Because Windows mix in format, that you set in Sound Settings. I think you settings is 5.1
Yes you are right.
Which one should I choose then?

http://i708.photobucket.com/albums/ww87/mybbsharkbait/SpeakerSetup-XonarDG.jpg

[Aleksoid1978]

Yes you are right.
Which one should I choose then?

http://i708.photobucket.com/albums/ww87/mybbsharkbait/SpeakerSetup-XonarDG.jpg

Test this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE.7z

First step - select MPC Audio Renderer on Options->Output->Audio Renderer. in MPC Audio Renderer select WASAPI Exclusive mode.

[nevcairiel]

Congratulations, and :thanks: again.

You should congratulate and thank the good people at ffmpeg for implementing it. :cool:

[madshi]

How's performance, compared to the MS VC-1 decoder?

[bozek]

:cool: stable version

Finally, thx guys! ;)

[nevcairiel]

How's performance, compared to the MS VC-1 decoder?

Its faster on some samples, slower on others. Frame-Interlaced and Progressive samples are slightly faster (~10%), field-interlaced are same speed or even slightly slower.

However its not bit-exact because some loop filtering is still missing, and there are some VC1 samples that don't work yet.

You can turn off the WMV9 DMO in LAV for a direct comparison.

[SamKook]

It doesn't output to the same format for me:
http://i.imgur.com/uct0YTs.jpg

My audio card support up to 192KHz(I tried setting it at 48KHz instead and it dindn't change anything) and 24bit from what I understand: http://ca.asus.com/en/Multimedia/Audio_Cards/Xonar_D1/#specifications

[Aleksoid1978]

It doesn't output to the same format for me:
http://i.imgur.com/uct0YTs.jpg

My audio card support up to 192KHz(I tried setting it at 48KHz instead and it dindn't change anything) and 24bit from what I understand: http://ca.asus.com/en/Multimedia/Audio_Cards/Xonar_D1/#specifications

You use my test build ?

[SamKook]

You use my test build ?

I did

[ontherocks]

Test this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE.7z

First step - select MPC Audio Renderer on Options->Output->Audio Renderer. in MPC Audio Renderer select WASAPI Exclusive mode.

With the settings as mentioned in this post (http://forum.doom9.org/showpost.php?p=1632622&postcount=1200), I am able to obtain bit-exact playback with wav files. But the issue remains the same with hi resolution lossless wma files.
Example wma files could be obtained from here
ftp://www.unipheyemusic.com/audio/TestPageSamples
here
http://www.gimell.com/recording-free-trial-downloads-1.aspx
and here
http://www.gimell.com/recording-free-trial-downloads-2.aspx

[Aleksoid1978]

I did

I see - LAV Audio Decoder set "incorrect" channel mask. It must 0x06f instead 0x3f for 5.1 output.

P.S. Update. Now work fine with LAV Audio - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_2.7z

[Aleksoid1978]

With the settings as mentioned in this post (http://forum.doom9.org/showpost.php?p=1632622&postcount=1200), I am able to obtain bit-exact playback with wav files. But the issue remains the same with hi resolution lossless wma files.
Example wma files could be obtained from here
ftp://www.unipheyemusic.com/audio/TestPageSamples
here
http://www.gimell.com/recording-free-trial-downloads-1.aspx
and here
http://www.gimell.com/recording-free-trial-downloads-2.aspx

1 - in MPC Audio Decoder check all output format - 16/24/32/float
2 - what's wrong with .wmv playback ??

[SamKook]

I see - LAV Audio Decoder set "incorrect" channel mask. It must 0x06f instead 0x3f for 5.1 output.

P.S. Update. Now work fine with LAV Audio - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_2.7z

It was also behaving the same with MPC internal decoders(except for the 0x60f vs 0x3f).

I tested v2 and nothing's changed:
http://i.imgur.com/GyWmHPn.jpg

If the input is limited to 16bit, it will play at 48KHz with both LAV and MPC, but anything higher and it drops to 44.1KHz. The output is always 16bit.

[Aleksoid1978]

If the input is limited to 16bit, it will play at 48KHz with both LAV and MPC, but anything higher and it drops to 44.1KHz. The output is always 16bit.

Make screen of this Audio Setting in you system:
http://i.imgur.com/o6k6l8z.png
http://i.imgur.com/DS2m43q.png

[SamKook]

The default format for shared mode in the advanced tab was the culprit, changing it will change the output bit and KHz. I was only changing it in the audio driver software.

But that seems like pretty odd behavior.
Shouldn't the renderer use the highest settings supported by the hardware instead of using the default set in windows? And shouldn't exclusive mode ignore windows settings(especially when they specify it's for shared mode and is a default value, not a fixed one) and use the hardware directly or am I missing something here.

[Aleksoid1978]

Here 3 test build. Must work with 24bit/32bit output
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_3.7z

P.S. Before test - check "Allow bit-exact output" in MPC Audio Renderer settings.

[SamKook]

v3 will use the closest supported settings from the input when "Allow bit-exact output" is checked which is very nice.

So I now get 24bit and 48KHz for 32bit 48KHz sources regardless of what setting is set for the default shared mode.


A quick unrelated question: Is there a way to only launch the player in fullscreen when you open the player, like mpchc does instead of going to fullscreen every time a new file is opened?
When I decide to exit fullscreen after loading something directly or if I launch the player without loading a video or audio file, I'd really like it to not switch to fullscreen automatically if I load a new video or audio file. mpchc behaves like that and I love it since if I'm not already in fullscreen after the player is launched the first time, I most likely want to stay in windowed mode.

[Aleksoid1978]

A quick unrelated question: Is there a way to only launch the player in fullscreen when you open the player, like mpchc does instead of going to fullscreen every time a new file is opened?
When I decide to exit fullscreen after loading something directly or if I launch the player without loading a video or audio file, I'd really like it to not switch to fullscreen automatically if I load a new video or audio file. mpchc behaves like that and I love it since if I'm not already in fullscreen after the player is launched the first time, I most likely want to stay in windowed mode.

Try this - check "Remember window size" and "Remember window position".

[SamKook]

Try this - check "Remember window size" and "Remember window position".

I'll try it after I finish watching my current youtube video since I can't resume it if I restart the player, but if they do the same thing as mpchc, then I don't want those two enabled even if they actually prevent the player from going to fullscreen mode when a file is opened after the player is already started.

I want the player to zoom to 100% for every video when not in fullscreen(I have that enabled) and switching from HD to SD video will move the player default position to the left which really annoys me(I wish it could remember the position from the right side instead of the left).
So I'm not sure those will have the desired effect.

[SamKook]

It still goes to fullscreen with those 2 options enabled.

To make sure you understand what I mean, here's the 2 way I use the player 99% of the time.

1- Double-click on a video or use XBMC to launch mpcbe, the video goes into fullscreen, I watch it and the player exit automatically. Then I start the process again to watch another video. This is my main use of it and it works as intended in both mpc be and mpc hc.

2- a) Open the player directly without loading anything so it opens in windowed mode(so far both mpc be and mpc hc act the same).
b) Then open a video so I can watch it and do some other stuff on my computer at the same time. This is the step where mpc be and mpc hc differ.
Mpc hc won't go to fullscreen and this is exactly what I want since I'll continue to work on other things.
Mpc be on the other hand will always switch to fullscreen every time you open a video, regardless of the current state the player is in so I have to switch out of fullscreen for every video I watch.
c) Open another video without closing the player. Here mpc be will once again switch to fullscreen which will force me to switch back to windowed mode manually while mpc hc will stay in windowed mode.

So what I want is for it to only switch to fullscreen when the player gets started unless no video is loaded and for it to stay in windowed mode once it's started, even if I open a new video.

[Mercury_22]

It still goes to fullscreen with those 2 options enabled.

To make sure you understand what I mean, here's the 2 way I use the player 99% of the time.

1- Double-click on a video or use XBMC to launch mpcbe, the video goes into fullscreen, I watch it and the player exit automatically. Then I start the process again to watch another video. This is my main use of it and it works as intended in both mpc be and mpc hc.

2- a) Open the player directly without loading anything so it opens in windowed mode(so far both mpc be and mpc hc act the same).
b) Then open a video so I can watch it and do some other stuff on my computer at the same time. This is the step where mpc be and mpc hc differ.
Mpc hc won't go to fullscreen and this is exactly what I want since I'll continue to work on other things.
Mpc be on the other hand will always switch to fullscreen every time you open a video, regardless of the current state the player is in so I have to switch out of fullscreen for every video I watch.
c) Open another video without closing the player. Here mpc be will once again switch to fullscreen which will force me to switch back to windowed mode manually while mpc hc will stay in windowed mode.

So what I want is for it to only switch to fullscreen when the player gets started unless no video is loaded and for it to stay in windowed mode once it's started, even if I open a new video.

If I understand you correctly then your MPC-BE settings are mess up
I use MPC-BE in the same way as you in XBMC <playercorefactory>
<players>
<player name="MPC-BE" type="ExternalPlayer" audio="true" video="true">
<filename>C:\Program Files (x86)\MPC-BE\mpc-be.exe</filename>
<args>"{1}" /fullscreen /close</args>
<hidexbmc>true</hidexbmc>
<hideconsole>false</hideconsole>
<warpcursor>none</warpcursor>
</player>
</players>
</playercorefactory> but when I'm using it outside XBMC doesn't go to full screen
So you should try reset your settings (at least disable "Lunch files in full screen" option if selected) and see what happens

[ontherocks]

2 - what's wrong with .wmv playback ??
Not .wmv, it's .wma files that still have the problem. The issue is, any wma file with sampling rate greater than 48kHz, is displayed in my AVR as 48kHz. and 2 Channel files with sampling rate greater than 48kHz are displayed as Multichannel PCM 5.1 in my AVR.

It is the same issue that was present with .wav files, which you fixed that in the previous wasapi fix (http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE.7z) for bit-exact playback. So now, .wma files remain to be fixed.

[Aleksoid1978]

Not .wmv, it's .wma files that still have the problem. The issue is, any wma file with sampling rate greater than 48kHz, is displayed in my AVR as 48kHz. and 2 Channel files with sampling rate greater than 48kHz are displayed as Multichannel PCM 5.1 in my AVR.

It is the same issue that was present with .wav files, which you fixed that in the previous wasapi fix (http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE.7z) for bit-exact playback. So now, .wma files remain to be fixed.

Test this http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_4.7z

set the checkbox as shown in screen:
http://i.imgur.com/vWAdXYm.png

[madshi]

0x60f is actually the correct channel mask for 5.1 audio. Many tools use 0x3f, though, so I guess both should be treated identically.

[nevcairiel]

Both 0x60f and 0x3f are correct for 5.1, it just depends which standard you read. The opinions on this have changed back and forth over the years.

[Aleksoid1978]

Both 0x60f and 0x3f are correct for 5.1, it just depends which standard you read. The opinions on this have changed back and forth over the years.

For WASAPI output mode 5.1 need set 0x60f channel mask. if set 0x3f - device initialization failed.

[madshi]

http://msdn.microsoft.com/en-us/windows/hardware/gg463023

In earlier versions of Windows (Windows 98/Me, Windows 2000, Windows XP with SP1, and Windows Server 2003), the interpretation of the channel mask 0x3F is that it assigns the six channels in the 5.1 format to the following speaker positions: FL, FR, FC, LFE, BL, and BR. (This is the back-speaker 5.1 configuration.) However, the interpretation in Windows XP with SP2, Windows Server 2003 with SP1, and Windows Vista is different: by convention, the 5.1 format with the channel mask 0x3F is interpreted to mean the side-speaker 5.1 configuration instead of the back-speaker 5.1 configuration.

Interpreting the channel mask in this manner eliminates the requirement to introduce a second 5.1-channel format descriptor to distinguish the side-speaker 5.1 configuration from the back-speaker 5.1 configuration. These two configurations are so similar that typical users might have difficulty distinguishing between them. Although having only a single 5.1-channel format descriptor avoids confusing users, it does require hardware vendors to remember to interpret the 0x3F channel mask to mean that channels 5 and 6 are assigned to the SL and SR speaker positions instead of the BL and BR positions. In return for having to remember this special-case interpretation of the channel mask for a 5.1 stream, vendors can spare users the difficulty of distinguishing between two very similar 5.1-channel format descriptors.
So basically, 0x60f is the correct mask to use, and 0x3f should be supported, but treated as 0x60f.

For WASAPI output mode 5.1 need set 0x60f channel mask. if set 0x3f - device initialization failed.
According to the Microsoft doc linked to above, XP and Windows 2003 might need 0x3f, if the latest Service Packs are not installed yet. Maybe you should first try to use 0x60f for WASAPI and if that fails, as plan B try 0x3f, too?

[alexins]

MPC-BE v1.2.1.0 -dev build 2961 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.2.1.0 -dev build 2961/) (sourceforge)
MPC-BE v1.2.1.0 -dev build 2961 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1595.0.html) (Dev. MPC-BE)

[Aleksoid1978]

I remade - generating channels layout depending on the number of channels. For 5.1 - 0x60f :)

[nevcairiel]

According to the Microsoft doc linked to above, XP and Windows 2003 might need 0x3f, if the latest Service Packs are not installed yet. Maybe you should first try to use 0x60f for WASAPI and if that fails, as plan B try 0x3f, too?

Thats not a big problem, because XP has no WASAPI. ;)

[madshi]

Haha, you're right. Where do I have my head? :)

[SamKook]

If I understand you correctly then your MPC-BE settings are mess up
I use MPC-BE in the same way as you in XBMC <playercorefactory>
<players>
<player name="MPC-BE" type="ExternalPlayer" audio="true" video="true">
<filename>C:\Program Files (x86)\MPC-BE\mpc-be.exe</filename>
<args>"{1}" /fullscreen /close</args>
<hidexbmc>true</hidexbmc>
<hideconsole>false</hideconsole>
<warpcursor>none</warpcursor>
</player>
</players>
</playercorefactory> but when I'm using it outside XBMC doesn't go to full screen
So you should try reset your settings (at least disable "Lunch files in full screen" option if selected) and see what happens

I still want them to go to fullscreen when I simply double-click a video file outside of XBMC so I want the "Launch files in fullscreen" option enabled. I simply wish there would be a way to make it behave like mpc hc.

I reset my settings with every version I install so I doubt they would be messed up.

[Mercury_22]

I still want them to go to fullscreen when I simply double-click a video file outside of XBMC so I want the "Launch files in fullscreen" option enabled. I simply wish there would be a way to make it behave like mpc hc.

I reset my settings with every version I install so I doubt they would be messed up.

Now I think I understand you
So what you're saying is that if the player is already open when opening a file (File -> (Quick)Open File) MPC-HC is ignoring the enabled "Launch files in fullscreen" option while MPC-BE doesn't ?
If that's so to me it looks more like a bug in MPC-HC :rolleyes:

To get the behavior you want from MPC-BE disable "Launch files in fullscreen" and modify the registry for every type of file you have associated with MPC-BE like in this example for ".mkv" [HKEY_CLASSES_ROOT\mpc-be.mkv\shell\open\command]
@="\"C:\\Program Files (x86)\\MPC-BE\\mpc-be.exe\" \"%1\" /fullscreen"

All this assuming that now I understood you correctly :)

[ontherocks]

Edited

[SamKook]

Now I think I understand you
So what you're saying is that if the player is already open when opening a file (File -> (Quick)Open File) MPC-HC is ignoring the enabled "Launch files in fullscreen" option while MPC-BE doesn't ?
If that's so to me it looks more like a bug in MPC-HC :rolleyes:

To get the behavior you want from MPC-BE disable "Launch files in fullscreen" and modify the registry for every type of file you have associated with MPC-BE like in this example for ".mkv" [HKEY_CLASSES_ROOT\mpc-be.mkv\shell\open\command]
@="\"C:\\Program Files (x86)\\MPC-BE\\mpc-be.exe\" \"%1\" /fullscreen"

All this assuming that now I understood you correctly :)

That's exactly what I meant.

From the way the option is called, I agree that it could be an mpc hc bug, but it's the perfect behavior, at least in my mind since I can't think of why you would want it to go to fullscreen once the player is already opened.
An option called "launch the player in fullscreen"(when a file is opened at the same time) would be really nice to have too.

I used to edit the registry for every file type to enable exiting the player before the "every time" option was implemented and it was so much trouble when it was updating time or it changed by itself(don't remember what was causing this though) that I don't want to do that ever again. Especially since I keep the version number in the installation folder name.
I'll probably simply use 2 different mpc be installation with ini settings instead, hoping window can pin them both properly to the taskbar.

[VipZ]

New Audio renderer is working great.

Any reason why this is not playing at 48000Hz,
http://i.imgur.com/CPRWcIs.jpg

2.0 plays fine at 16/24/32bit at 44100,48000,96000Hz
7.1 plays fine at 16/32bit at 48000,96000Hz

5.1 fails at bit exact with 16/32bit @ 48000Hz /w both LAV and MPC (Used both Test4 + SVN to test)
2.0 at 16/24bit at 192000Hz fails to output any sound if my sound is set at 96000Hz and works when set at 192000Hz, is this expected?

MPC-BE can crash if changing LAV Audio output settings during playback.

Let me know if you want me to test anything specific

[Aleksoid1978]

New Audio renderer is working great.

Any reason why this is not playing at 48000Hz,
http://i.imgur.com/CPRWcIs.jpg

2.0 plays fine at 16/24/32bit at 44100,48000,96000Hz
7.1 plays fine at 16/32bit at 48000,96000Hz

5.1 fails at bit exact with 16/32bit @ 48000Hz /w both LAV and MPC (Used both Test4 + SVN to test)
2.0 at 16/24bit at 192000Hz fails to output any sound if my sound is set at 96000Hz and works when set at 192000Hz, is this expected?

MPC-BE can crash if changing LAV Audio output settings during playback.

Let me know if you want me to test anything specific

Upload please "problem" file - i see what's happened :)

[VipZ]

Upload please "problem" file - i see what's happened :)

If you referring to a 192Khz sample, here's one. http://www.mediafire.com/download/ta5yg3lhkgbanr7/192Khz.flac

I tested the sample and it now works, I am pretty positive I closed other audio applications to ensure it had exclusive access.

With regards to the 5.1 issue, this is any 5.1 audio file, none work bit exact. Changing my audio output to different bit/Hz or channel count makes no difference, always plays at the shared mode setting.

The MPC-BE crashing seems to occur if the mode changed from bit exact capable to shared mode config or vice versa.

[Aleksoid1978]

If you referring to a 192Khz sample, here's one. http://www.mediafire.com/download/ta5yg3lhkgbanr7/192Khz.flac

I tested the sample and it now works, I am pretty positive I closed other audio applications to ensure it had exclusive access.

With regards to the 5.1 issue, this is any 5.1 audio file, none work bit exact. Changing my audio output to different bit/Hz or channel count makes no difference, always plays at the shared mode setting.

The MPC-BE crashing seems to occur if the mode changed from bit exact capable to shared mode config or vice versa.

As i understand - any 5.1 audio do not work Exclusive + bit-exact.

P.S. Test this build, i do some change for 5.1 output - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_5(test_5.1_channels_layout).7z

And this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_6.7z. In this build - at the start doing detect supported output format and then try to use this values.

[VipZ]

Awesome, v6 working with both 16/32bit :)

Reported as 0x3f

[secvensor]

Huge minus in adjustment:
http://i48.fastpic.ru/big/2013/0622/54/8519f4419dfbae038d86275992919f54.jpg
Start play audio in Full Screen and changes the size of a window if it has been adjusted by the previous file.
It is necessary to fix the size of a window and not to expand it on all screen if the file does not contain video and the user does not want to see any badges with the album name in the main window. Thus to leave possibility to start in Full Screen mode video file only.

[VipZ]

Any chance the changes for mpc-be.exe_WASAPI_EXCLUSIVE_6 could be merged into the SVN?

It has also seemed to fix the MPC-BE crash issue and 5.1 when trying bit exact looked quite out of sync and also looks corrected with this build.

[judelaw]

Start play audio in Full Screen and changes the size of a window if it has been adjusted by the previous file.
It is necessary to fix the size of a window and not to expand it on all screen if the file does not contain video and the user does not want to see any badges with the album name in the main window. Thus to leave possibility to start in Full Screen mode video file only.

try this test : http://www.mediafire.com/download/yrk7ccc77pcr8qk/mpc-be_r2967_AudioOnly_01.7z

[secvensor]

judelaw
Drag and Drop works good, but double click all the same deduces in the Full screen.

[judelaw]

judelaw
Drag and Drop works good, but double click all the same deduces in the Full screen.

ok, http://www.mediafire.com/download/6b9ck2er9hc2eke/mpc-be_x86_r2967_AudioOnly_02.7z

[secvensor]

judelaw
It works! Thanks!

[Aleksoid1978]

Any chance the changes for mpc-be.exe_WASAPI_EXCLUSIVE_6 could be merged into the SVN?

It has also seemed to fix the MPC-BE crash issue and 5.1 when trying bit exact looked quite out of sync and also looks corrected with this build.

Yes :)

[SamKook]

I've been using the wasapi exclusive v6 all day and I've been experiencing 1 to 3 glitches(the audio cut for a fraction of a second with a noticeable sound) in the audio per hour long video. The glitches aren't in the files themselves since if I seek back, it plays fine.

They happen both with LAV filters and the internal decoders.

[adrianmak]

is there any benefit to use x64 version?

[wanezhiling]

In most case, no.

[VipZ]

Yes :)

Thanks

I've been using the wasapi exclusive v6 all day and I've been experiencing 1 to 3 glitches(the audio cut for a fraction of a second with a noticeable sound) in the audio per hour long video.
Update: This occurred for me as well, seeking back and then no glitch.

Update: It seems every time bit exact cant be used directly the adjustment can results in out of sync audio, ie if I switch to using my sound card for headphones output on 5.1 audio this adjustment can result in OoS audio. Disabling bit exact or using shared mode does not seem to result in OoS audio, also ticking the use system layout seems to correct.

[Aleksoid1978]

Thanks


Update: This occurred for me as well, seeking back and then no glitch.

Update: It seems every time bit exact cant be used directly the adjustment can results in out of sync audio, ie if I switch to using my sound card for headphones output on 5.1 audio this adjustment can result in OoS audio. Disabling bit exact or using shared mode does not seem to result in OoS audio, also ticking the use system layout seems to correct.

Test on svn version - http://rghost.ru/46959998

[VipZ]

Test on svn version - http://rghost.ru/46959998

The above results were with the latest SVN already.

[Aleksoid1978]

The above results were with the latest SVN already.

Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_10.7z

if there are glitches - see if there are a file mpc-be.log on your Desktop.

If there is - to unload it for me.

[SamKook]

That only took 28 secs:

2013.06.23 22:28:28.603 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 22:28:28.603 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 22:28:28.051 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 41472
2013.06.23 22:28:28.401 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 0
2013.06.23 22:28:28.503 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 39744

[Aleksoid1978]

That only took 28 secs:

2013.06.23 22:28:28.603 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 22:28:28.603 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 22:28:28.051 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 41472
2013.06.23 22:28:28.401 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 0
2013.06.23 22:28:28.503 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 39744

What file you open. What filter use ???

P.S. Update build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_11.7z, fix time in log file :)
Can you just open file and stay playback before any glitch.
About log - this usually happened after open and seeking. This should not happen on the playing time.

[SamKook]

What file you open. What filter use ???

Video: MPEG4 Video (H264) 1280x720 23.976fps [Video]
Audio: Dolby AC3 48000Hz 6ch 384kbps [Audio]
with LAVfilters

same thing with the internal decoders and a different file with the same specs:
2013.06.23 23:13:13.017 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:13:13.018 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:14:14.065 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 41472

Edit: Tried v11
The first 2 lines from the following log were from when I resumed a file and the 3rd was a glitch during playback:
2013.06.23 23:19:14.400 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:19:14.400 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:19:36.449 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 41472

[Aleksoid1978]

Video: MPEG4 Video (H264) 1280x720 23.976fps [Video]
Audio: Dolby AC3 48000Hz 6ch 384kbps [Audio]
with LAVfilters

same thing with the internal decoders and a different file with the same specs:
2013.06.23 23:13:13.017 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:13:13.018 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:14:14.065 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 41472

Edit: Tried v11
The first 2 lines from the following log were from when I resumed a file and the 3rd was a glitch during playback:
2013.06.23 23:19:14.400 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:19:14.400 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 27648
2013.06.23 23:19:36.449 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 43200[2400], available: 41472

1 - Can you test with internal filters only.
2 - Can you upload a short sample on this file.

[SamKook]

1 - Can you test with internal filters only.
2 - Can you upload a short sample on this file.

1- Already did in my previous post(the first set of log), same result.

2- It's not specific to one file, all files I played so far did the same thing.

I tried with the following file which had 24 bit input(the same as my output) and also got a glitch less than a minute after playback which is when it happens the most often.
Video: Windows Media Video 9 1280x720 24fps 5000kbps [Raw Video 1]
Audio: WMA Pro 44100Hz stereo 440kbps [Raw Audio 0]

[Aleksoid1978]

1- Already did in my previous post(the first set of log), same result.

2- It's not specific to one file, all files I played so far did the same thing.

I tried with the following file which had 24 bit input(the same as my output) and also got a glitch less than a minute after playback which is when it happens the most often.
Video: Windows Media Video 9 1280x720 24fps 5000kbps [Raw Video 1]
Audio: WMA Pro 44100Hz stereo 440kbps [Raw Audio 0]

Strangely ...

P.S. I open video + run WinRar benchmark - and do not have this issue. I will got "not enough data" only at start(and after seeking).

[Aleksoid1978]

1- Already did in my previous post(the first set of log), same result.

2- It's not specific to one file, all files I played so far did the same thing.

I tried with the following file which had 24 bit input(the same as my output) and also got a glitch less than a minute after playback which is when it happens the most often.
Video: Windows Media Video 9 1280x720 24fps 5000kbps [Raw Video 1]
Audio: WMA Pro 44100Hz stereo 440kbps [Raw Audio 0]

Test please this 2 build and give me a log.
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_12a.7z

http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_12b.7z

[VipZ]

Test please this 2 build and give me a log.
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_12a.7z

http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_12b.7z

Thanks

Will test tonight, would you expect this to also help with the out of sync audio?

[SamKook]

Test please this 2 build and give me a log.
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_12a.7z

http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_12b.7z

v12a behaves just like the others:
http://www.mediafire.com/?a6u9444idi9d84f

v12b always go terribly out of sync after 10+ minutes of playback with no glitch in the log, but I thought I heard some smaller than usual ones(could have been in the file though, I didn't seek back since I wanted to keep the log clean):
http://www.mediafire.com/?6d7zp794dtspb6y

[Casshern]

Do the settings for MPC-HC and MPC-BE peacefully coexist? Can install both on one machine, so that they behave completely independent?

[SamKook]

I don't remember when you're using the registry but I would guess yes.

And if you check the "Store settings to .ini file", you can have as many version of the 2 as you want at the same time.

[Aleksoid1978]

Do the settings for MPC-HC and MPC-BE peacefully coexist? Can install both on one machine, so that they behave completely independent?

Yes - it's use different key in registry

[Aleksoid1978]

v12a behaves just like the others:
http://www.mediafire.com/?a6u9444idi9d84f

v12b always go terribly out of sync after 10+ minutes of playback with no glitch in the log, but I thought I heard some smaller than usual ones(could have been in the file though, I didn't seek back since I wanted to keep the log clean):
http://www.mediafire.com/?6d7zp794dtspb6y

Thanks - i think i understand what's wrong.

[Aleksoid1978]

SamKook, VipZ
Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_13a.7z

About glitch & A/V Desync - i wait log file from you. It's create on Desktop.

[v0lt]

MPC-BE v1.2.1.0 -dev build 2972 (http://dev.mpc-next.ru/index.php/topic,1606.msg8809.html#msg8809)

[Aleksoid1978]

Thanks

Will test tonight, would you expect this to also help with the out of sync audio?

Can you upload examples of the file on which you are out of A/V sync. And - what decoding you use, Bitstream or PCM output ?.

[SamKook]

SamKook, VipZ
Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_EXCLUSIVE_13a.7z

About glitch & A/V Desync - i wait log file from you. It's create on Desktop.

It's in a constant state of glitching. It sounds like they speak through the blades of a fan.

Edit: Forgot to say that there wasn't anything in the log except the 2 usual lines when you start the video.

[Casshern]

Yes - it's use different key in registry

Thanks!

[VipZ]

Can you upload examples of the file on which you are out of A/V sync. And - what decoding you use, Bitstream or PCM output ?.

Tested with mpc-be.exe_WASAPI_EXCLUSIVE_13a.

I don't seem to get any glitches in the short period of testing.

With regards to the OoS audio, this is quite random and can happen on almost any media file.

Here's the log file from a time when it was over 2 seconds out,
2013.06.25 20:21:28.050 : CMpcAudioRenderer::RenderWasapiBuffer() - Data Event, not enough data, requested: 57600[2400], available: 36864, elapsed time: 0, buffer size: 500000
2013.06.25 20:21:28.052 : CMpcAudioRenderer::RenderWasapiBuffer() - render event occurred too early, elapsed time: 21899, buffer size: 500000

Was using this sample, http://www.mediafire.com/download/94q08mhpheee77y/eac3_detection_sample.VOB

I am testing with LAV decoding to PCM

[SamKook]

I tried VipZ sample and it also constantly glitches like all my other test, both with LAV filters and the internal ones.

I recorded part of the sample during playback to give you an idea of what it sounds like(it's not very loud since I had terrible feedback in my TV speakers and win7 sound recorder is terrible, but you should be easily able to hear it with the volume up since I was): http://www.mediafire.com/?fc36zx7fs7f68g5

[Aleksoid1978]

SamKook, VipZ - Reclock play fine ??

[SamKook]

SamKook, VipZ - Reclock play fine ??

Yes it does, never had any problem with it.

[Aleksoid1978]

Yes it does, never had any problem with it.

Smart people work there :)

[VipZ]

SamKook, VipZ - Reclock play fine ??

I have never liked the way Reclock works so never used. MPC Audio renderer shows great promise cause it will output the source as bit exact and not try fit something into a specific setting like reclock

[ontherocks]

As per the real time edid of my AVR, it supports 88kHz & 176kHz sampling rate.

http://img841.imageshack.us/img841/4426/z05u.png

Yet, for audio tracks with a sampling rate of 88.2kHz and 176.4kHz, I see 192kHz in my AVR.
I have the bit-exact option turned ON.

Example file 88.2kHz - http://download.linnrecords.com/test/flac/recit24bit.aspx
Example file 176.4kHz - http://www.audiocheck.net/testtones_highdefinitionaudio.php

[nevcairiel]

NVIDIA GPUs don't support 88.2 kHz, in case you have one of those.

[Aleksoid1978]

As per the real time edid of my AVR, it supports 88kHz & 176kHz sampling rate.

http://img841.imageshack.us/img841/4426/z05u.png

Yet, for audio tracks with a sampling rate of 88.2kHz and 176.4kHz, I see 192kHz in my AVR.
I have the bit-exact option turned ON.

Example file 88.2kHz - http://download.linnrecords.com/test/flac/recit24bit.aspx
Example file 176.4kHz - http://www.audiocheck.net/testtones_highdefinitionaudio.php

Look at the list of supported frequencies of your audio device:
http://i.imgur.com/4zpyReF.png

[Aleksoid1978]

VipZ, SamKook
Test please on different builds from here - http://aleksoid.voserver.net/MPC-BE/WASAPI/

[v0lt]

MPC-BE v1.2.1.0 -dev build 2985 (http://dev.mpc-next.ru/index.php/topic,1606.msg8880.html#msg8880)

[wanezhiling]

50mc_Device_Period_Seeking_test_2 is the best for me. :)

[Aleksoid1978]

50mc_Device_Period_Seeking_test_2 is the best for me. :)

What about noise after seeking ??

[wanezhiling]

Gone :)

[Aleksoid1978]

Gone :)

It's a great news.

[Aleksoid1978]

50mc_Device_Period_Seeking_test_2 is the best for me. :)

Can you test this build again - a made some changes and upload again. :)

[wanezhiling]

Work fine as before

[VipZ]

VipZ, SamKook
Test please on different builds from here - http://aleksoid.voserver.net/MPC-BE/WASAPI/

In some short testing I would say the best is for seeking is mpc-be.exe_minimal_Device_Period.7z but audio sync seems worse

And mpc-be.exe_50mc_Device_Period_Seeking_test_2.7z for audio sync

Tested with both AMD HDMI to AVR and sound card using headphones (Windows drivers).

[Keiyakusha]

Not sure if I should report this or not, but in MPC-BE svn r2985 Audio renderer produces no sound when plays aac audio (http://db.tt/70mx1j3P). This happens only in shared mode, exclusive works.
This is the same using lav splitter/decoder or internal splitter/decoder

Last MPC-BE stable - works.

Edit: mpc-be.exe_50mc_Device_Period_Seeking_test_2.7z - no sound

[VipZ]

Not sure if I should report this or not, but in MPC-BE svn r2985 Audio renderer produces no sound when plays aac audio (http://db.tt/70mx1j3P). This happens only in shared mode, exclusive works.
This is the same using lav splitter/decoder or internal splitter/decoder

Last MPC-BE stable - works.

Edit: mpc-be.exe_50mc_Device_Period_Seeking_test_2.7z - no sound

Working ok for me in both shared and exclusive mode with this build via both HDMI and soundcard

[Keiyakusha]

Works for me if I set output as 32bit float. Anything below does not work.
Also this is not every aac audio. Test the one that I posted.

EDIT: From what i see in "status" it tries to output 32bit float 48000hz. If the input is 44100hz below 32bit float it fails.
Why it can't play input as is?

Edit2: so using the audio I posted above. Decoder is set to output 24bit audio:
https://dl.dropboxusercontent.com/u/110558786/DesktopScreens/88ECE26F.png

Exclusive works, Shared not. And neither bitdepth/samplerate output is good.

[Aleksoid1978]

Works for me if I set output as 32bit float. Anything below does not work.
Also this is not every aac audio. Test the one that I posted.

EDIT: From what i see in "status" it tries to output 32bit float 48000hz. If the input is 44100hz below 32bit float it fails.
Why it can't play input as is?

Edit2: so using the audio I posted above. Decoder is set to output 24bit audio:
https://dl.dropboxusercontent.com/u/110558786/DesktopScreens/88ECE26F.png

Exclusive works, Shared not. And neither bitdepth/samplerate output is good.

I fix Shared Mode :)
But best way - use Exclusive Mode + bi-exact.

P.S. Fixed Shared mode in rev. 2992;

[VipZ]

I fix Shared Mode :)
But best way - use Exclusive Mode + bi-exact.

I saw an update on SVN, does this now superseded any of the previous test builds?

[Aleksoid1978]

I saw an update on SVN, does this now superseded any of the previous test builds?

it's equal to mpc-be.exe_50mc_Device_Period_Seeking_test_2.7z build

[v0lt]

MPC-BE v1.2.1.0 -dev build 2992 (http://dev.mpc-next.ru/index.php/topic,1606.msg8892.html#msg8892)

[VipZ]

it's equal to mpc-be.exe_50mc_Device_Period_Seeking_test_2.7z build

Thanks

[bozek]

I got a 2in1 mkv file here. How do I switch between the two playlists?

[z_mashine]

I got a 2in1 mkv file here. How do I switch between the two playlists?

use AV, LAV or Matroska splitter. there is no way to choose "edition" with built-in splitters.

[mark0077]

Hi guys, has something changed in relation to the handling of the "launch files in fullscreen" in a recent build. I have it checked with the hopes of never seeing any windows related items when launching from applications like xbmc, I intend to go directly to fullscreen, heres how it used to work.

Before - Scenario 1
1) Open mpc-be in windowed mode
2) Double click a movie
Result: It plays and stays in windowed mode (I guess this is expected?)

Before - Scenario 2
1) With mpc closed, double click a movie
Result: It immediately triggers mpc-be to open in fullscreen mode.


Now what happens

After - Scenario 1
1) Open mpc-be in windowed mode
2) Double click a movie
Result: It plays in fullscreen mode (not the same as old behaviour but I guess it makes sense?)

After - Scenario 2
1) With mpc closed, double click a movie
Result: It opens mpc in windowed mode, and after a few seconds and a few flickers, triggers mpc-be to open in fullscreen mode. (this is my main concern, as when launching movies from applications I never want to see the mpc-be window at all)

Is it possible or difficult to have Scenario 2 reverted to the old behaviour? Ie never show the window of mpc-be when launching files, ie go fullscreen mode immediately.

[bozek]

use AV, LAV or Matroska splitter. there is no way to choose "edition" with built-in splitters.

Sounds like a good place for a new feature, then.

/me nudges the devs :)

[z_mashine]

Hi guys, has something changed in relation to the handling of the "launch files in fullscreen" in a recent build.

Before any file is opened in d3dfs mode when the option d3dfs is enabled. But there is no reason to open the audio files in d3dfs mode. Now only the video files open in d3dfs mode. But there is no way of knowing whether there is a video stream to a file without opening it. So now when the option d3dfs is enabled any file is opened first in windowed mode, then there is a check for the presence of a video stream, and if it is successful, the player switches to d3dfs mode.

The changes were made in r2969.

[z_mashine]

Sounds like a good place for a new feature, then.

Aleksoid1978 already took up the implementation of such a feature, but nothing came of it yet.

[mark0077]

Before any file is opened in d3dfs mode when the option d3dfs is enabled. But there is no reason to open the audio files in d3dfs mode. Now only the video files open in d3dfs mode. But there is no way of knowing whether there is a video stream to a file without opening it. So now when the option d3dfs is enabled any file is opened first in windowed mode, then there is a check for the presence of a video stream, and if it is successful, the player switches to d3dfs mode.

The changes were made in r2969.

Ah I understand yeah, thanks for the feedback. I'll revert back I guess for the time being. Not sure if theres many people that would want what I do, ie never show the windowed window. Its more for HTPC where the likes of XBMC can use mpc as an external player. It just looks clunky for users / guests to see a window appearing after launching a movie, then the movie starting you know. I guess the only software way around it would be to either

1) Go fullscreen by default (even if its just a black window) until the file is loaded and then revert to windowed if theres only audio within the file.
OR
2) Add another mpc option to "Always go fullscreen" even if no video is present :S

If fullscreen video is more likely to be used than audio only maybe option 1 would be a nice workaround, although then for audio only users that might be very clunky for that initial second...

[SamKook]

Not sure if theres many people that would want what I do, ie never show the windowed window.

I do too. But in my case, I would like both before scenarios to come back.

I use foobar2000 for audio only instead of a video player like mpcbe so I would also prefer not to have to see the window before going to fullscreen.
I'm not sure of the following, but I would assume showing the window and then going to fullscreen also cause madvr to not go directly in exclusive mode which prevents the OSD message(that I would love to be able to disable) for the switch to show up.
I hope I'll have time to test it tonight as well as the many wasapi builds but free time is a commodity don't have much of for the next couple of days.

Edit: I can confirm that showing the window before going to fullscreen prevents madvr from going directly to fullscreen exclusive mode.

Also, I tried the 50mc_Device_Period_Seeking_test_2 build since it was the most popular and out of 3 20min video, I had 1 audio glitch so it's certainly better since it doesn't happen for every video, but not quite perfect yet.

I'll try the others as soon as I can.

[Lord Maius]

ITA txt language file updated rev.2982
:)
http://sdrv.ms/12tb6PQ

[bozek]

Aleksoid1978 already took up the implementation of such a feature, but nothing came of it yet.

Does the word yet imply he hasn't put it on ice yet?

[judelaw]

1) Go fullscreen by default (even if its just a black window) until the file is loaded and then revert to windowed if theres only audio within the file.

I can do that. Everyone will be happy in this case? ;)

[z_mashine]

Does the word yet imply he hasn't put it on ice yet?

This means that the implementation of such a feature has been postponed indefinitely.

[mark0077]

I can do that. Everyone will be happy in this case? ;)

That would be fantastic. I guess the best case scenario is that when the likes of madVR starts in FSE mode, if mpc-be is already in fullscreen mode, madVR shouldn't show the "Exclusive" message which always seems to appear in mpc-be. Not sure how difficult it would be to make mpc-be be in fullscreen mode before madVR eliminating that "Exclusive" from appearing.

[ontherocks]

Look at the list of supported frequencies of your audio device:
http://i.imgur.com/4zpyReF.png

Below is the screenshot of the supported sampling rates in my device

http://img24.imageshack.us/img24/2218/80sz.png

Sorry, 88.2kHz files play bit-exact.
But if I play 16bit 176.4kHz files, I see 192Hz in my AVR.

176.4kHz samples here (all 176.4kHz files are 16bit)
http://www.audiocheck.net/testtones_highdefinitionaudio.php

[Aleksoid1978]

Below is the screenshot of the supported sampling rates in my device

http://img24.imageshack.us/img24/2218/80sz.png

Sorry, 88.2kHz files play bit-exact.
But if I play 16bit 176.4kHz files, I see 192Hz in my AVR.

176.4kHz samples here (all 176.4kHz files are 16bit)
http://www.audiocheck.net/testtones_highdefinitionaudio.php

Thanks. in nearest features i upload build for test.

P.S. Test this build - http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_14b.7z

[ontherocks]

Thanks. in nearest features i upload build for test.

P.S. Test this build - http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_14b.7z
Thanks, I will test this build tonight.

Meanwhile, I had this query...
Is the drop down listing in HDMI Properties --> Advanced, the only way to know what sampling rates and bit depths are supported? Isn't there any other way to figure that out?
And, is that drop down listing correct?
The reason I am asking is because, the drop down listing in my computer doesn't show 24bit 176.4kHz as supported. Yet if I play a 24bit/176.4kHz file in XBMC with WASAPI enabled, I see 176.4kHz displayed in my AVR. So I guess my graphics card does support it, even though the drop down listing doesn't mention it.

[Aleksoid1978]

Thanks, I will test this build tonight.

Meanwhile, I had this query...
Is the drop down listing in HDMI Properties --> Advanced, the only way to know what sampling rates and bit depths are supported? Isn't there any other way to figure that out?
And, is that drop down listing correct?
The reason I am asking is because, the drop down listing in my computer doesn't show 24bit 176.4kHz as supported. Yet if I play a 24bit/176.4kHz file in XBMC with WASAPI enabled, I see 176.4kHz displayed in my AVR. So I guess my graphics card does support it, even though the drop down listing doesn't mention it.

About 24bit 176.4kHz - i think if it's format do not show in Audio Settings, it's do not support. XBMC - i think it's output 16bit 176.4kHz. Better way - Ask this question to the developers of XBMC.

[ontherocks]

Thanks. in nearest features i upload build for test.

P.S. Test this build - http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_14b.7z

This build works :thanks:

About 24bit 176.4kHz - i think if it's format do not show in Audio Settings, it's do not support. XBMC - i think it's output 16bit 176.4kHz. Better way - Ask this question to the developers of XBMC.

Strangely, 24bit/176.4kHz files play in this MPC-BE build too and my AVR displays 176.4kHz. How come?

Samples here:
http://www.audiofilemusic.com/Scripts/Download.asp?File=/web/FreeDownload/01_Rimsky-Korsakov_Dance_of_the_Tumblers_176_flac.zip
http://www.audiofilemusic.com/Scripts/Download.asp?File=/web/FreeDownload/07_Taint_So_176_flac.zip
http://www.audiofilemusic.com/Scripts/Download.asp?File=/web/FreeDownload/AS091HiResTrk4_176_flac.zip

[Aleksoid1978]

Strangely, 24bit/176.4kHz files play in this MPC-BE build too and my AVR displays 176.4kHz. How come?

Samples here:
http://www.audiofilemusic.com/Scripts/Download.asp?File=/web/FreeDownload/01_Rimsky-Korsakov_Dance_of_the_Tumblers_176_flac.zip
http://www.audiofilemusic.com/Scripts/Download.asp?File=/web/FreeDownload/07_Taint_So_176_flac.zip
http://www.audiofilemusic.com/Scripts/Download.asp?File=/web/FreeDownload/AS091HiResTrk4_176_flac.zip

Look at MPC Audio Renderer "Status" tab, make screen-shot and upload here.

[ontherocks]

Look at MPC Audio Renderer "Status" tab, make screen-shot and upload here.

24bit/176.4kHz
http://i.imgur.com/vu5dT2E.png

It works even for 32bit files. :confused:

32bit/96kHz
http://i.imgur.com/lOELjTR.png

[Aleksoid1978]

24bit/176.4kHz
http://i.imgur.com/vu5dT2E.png

It works even for 32bit files. :confused:

32bit/96kHz
http://i.imgur.com/lOELjTR.png

I see.
You AVR support 176.4KHz & 24(32)bit. Window show incorrect information :)

[ontherocks]

I am confused

http://img24.imageshack.us/img24/2218/80sz.png

Here it doesn't list 24bit/88.2kHz, 24bit/176.4kHz or 32bit/anykHz. So doesn't that mean these are not supported?

[Aleksoid1978]

I am confused

http://img24.imageshack.us/img24/2218/80sz.png

Here it doesn't list 24bit/88.2kHz, 24bit/176.4kHz or 32bit/anykHz. So doesn't that mean these are not supported?

About 24/32bit - you AVR support 24bit padded to 32. In setting you see 24bit, but really - is 32bit(24 padded to 32).

[mindbomb]

I am confused
Here it doesn't list 24bit/88.2kHz, 24bit/176.4kHz or 32bit/anykHz. So doesn't that mean these are not supported?

It means when mpc audio renderer asks if these formats are supported, it will get an answer of no.
The fact that the format is indeed supported makes for a complicated situation.

[Aleksoid1978]

Who use WASAPI Exclusive - please test this builds
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_16a.7z
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_16b.7z
Need to check - was better or worse than it was.
Also pay attention to the A/V Sync.

[AngelGraves13]

Who use WASAPI Exclusive - please test this builds
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_16a.7z
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_16b.7z
Need to check - was better or worse than it was.
Also pay attention to the A/V Sync.

Sync is always off. It seems to steadily get worse as the file progresses until it gets to the point that you can clearly see their lips and audio do not match.

As much as I want to use MPC Audio Renderer, I'll just have to set it back to System Default.

I'm using LAV Filters as well.

[Keiyakusha]

I just noticed interesting thing.
YV12 limited range video, in my case 1920x1080, standard HD matrix. Played back with madvr
1) in MPC-BE go File - Save image - save as bmp
2) go in fullscreen on 1080p display, press PrintScreen, paste result into MS Paint, save as BMP
(fullscreen is not really required, use windowed if your display is bigger. its just to capture the whole frame without scaling.)

Resulting images 1 and 2 will be different. Is this expected?
Difference is very small and can't be seen easily. It needs to be amplified a lot.

P.S. yes I'm sure that I compared the same frame. I tested on a uncompressed video with 1-frame looped 2000 times.

[Aleksoid1978]

I just noticed interesting thing.
YV12 limited range video, in my case 1920x1080, standard HD matrix. Played back with madvr
1) in MPC-BE go File - Save image - save as bmp
2) go in fullscreen on 1080p display, press PrintScreen, paste result into MS Paint, save as BMP
(fullscreen is not really required, use windowed if your display is bigger. its just to capture the whole frame without scaling.)

Resulting images 1 and 2 will be different. Is this expected?
Difference is very small and can't be seen easily. It needs to be amplified a lot.

P.S. yes I'm sure that I compared the same frame. I tested on a uncompressed video with 1-frame looped 2000 times.

I think it's question to the madVR.

[madshi]

PrintScreen captures the image after the whole processing chain, including 3dlut, gamma processing, etc etc. The MPC screenshot functionality get the image directly after decoding and color conversion, so it has less processing applied to it. Also, dithering consists of random noise being added to the image. So you'll never get exactly the same image output (bit by bit), due to dithering.

[Aleksoid1978]

Sync is always off. It seems to steadily get worse as the file progresses until it gets to the point that you can clearly see their lips and audio do not match.

As much as I want to use MPC Audio Renderer, I'll just have to set it back to System Default.

I'm using LAV Filters as well.

Try this - http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_19b.7z

[ontherocks]

Could the Input/Output information which is displayed in the MPC Audio Renderer "Status" tab also be put in the player status bar, so that it's always visible or available via shortcut key?

One more question on the image below:

http://i.imgur.com/lOELjTR.png

For bit-exact, shouldn't the Output Format be 32bit Float?

[VipZ]

Noticed an issue with file association. When the modify button is chosen it does not update the current dialog but spawns a new one.


Will do some testing with mpc-be.exe_WASAPI_EXCLUSIVE_19b.7z and will let you know how it goes

[Aleksoid1978]

Could the Input/Output information which is displayed in the MPC Audio Renderer "Status" tab also be put in the player status bar, so that it's always visible or available via shortcut key?

One more question on the image below:

http://i.imgur.com/lOELjTR.png

For bit-exact, shouldn't the Output Format be 32bit Float?

1 - WASAPI Exclusive support only 16/24(32)int output.
2 - when use bit-exact, renderer is trying to use input parameters, if not - it uses the formats supported by your system.

[Aleksoid1978]

WASAPI, check this builds :)
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_20a.7z
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_20b.7z

[v0lt]

MPC-BE v1.2.1.0 -dev build 3022 (http://dev.mpc-next.ru/index.php/topic,1628.msg9035.html#msg9035)

[Thingol]

Hi guys,

Turkish translation is a bit old and I want to help for a complete translation. How can I get the latest language file and which file needs to be translated?

Thanks.

[Aleksoid1978]

Hi guys,

Turkish translation is a bit old and I want to help for a complete translation. How can I get the latest language file and which file needs to be translated?

Thanks.

http://aleksoid.voserver.net/MPC-BE/mplayerc.tr.rc.txt

[alexins]

Hi guys,

Turkish translation is a bit old and I want to help for a complete translation. How can I get the latest language file and which file needs to be translated?

Thanks.

Files with changes translation available for download here (http://svnlog.mpc-next.ru/listing.php?repname=MPC-BE+Team&path=%2Ftrunk%2Fsrc%2Fapps%2Fmplayerc%2Fmpcresources%2Ftext%2F&#a07895aeb8a8c3dc43d462a92bab27725) :)

[mark0077]

I can do that. Everyone will be happy in this case? ;)

Is there any plans to revert back the changes relating to the way mpc-be goes into fullscreen mode on startup.

I also now notice that it used to be possible to open a video with mpc-be in fullscreen and madVR would report 0 dropped frames at startup. Now due to the delayed way mpc goes into windowed, then fullscreen, then madVR FSE, I get about 60-100 frames at startup

This is a huge backward step IMO for HTPC users

[ontherocks]

1 - WASAPI Exclusive support only 16/24(32)int output.
2 - when use bit-exact, renderer is trying to use input parameters, if not - it uses the formats supported by your system.
Ok. So it means my hardware/driver supports 32bit Integer and not 32bit Float.

One more question.
As per my understanding, WASAPI (exclusive) is equivalent to bit-exact, then why is there an additional toggle "Allow bit-exact output"? What extra does it do?

[v0lt]

MPC-BE v1.2.1.0 -dev build 3030 (http://dev.mpc-next.ru/index.php/topic,1633.msg9066.html#msg9066)

[SamKook]

WASAPI, check this builds :)
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_20a.7z
http://aleksoid.voserver.net/MPC-BE/WASAPI/mpc-be.exe_WASAPI_EXCLUSIVE_20b.7z

I didn't have any glitch with v20a, but I noticed it went out of sync once after an hour and a half on the last movie I watched.

I haven't had time to try v20b yet.

[AngelGraves13]

Yeah, they all go out of sync for me...

[ontherocks]

Ok. So it means my hardware/driver supports 32bit Integer and not 32bit Float.

One more question.
As per my understanding, WASAPI (exclusive) is equivalent to bit-exact, then why is there an additional toggle "Allow bit-exact output"? What extra does it do?

Anyone has an idea about this?

[SamKook]

It was added because without it, the default set in Windows configuration was used.

[Keiyakusha]

ontherocks
wasapi is a different way to render audio. Phrase "equivalent to bit-exact" makes no sense in this context. When you tick that "Allow bit-exact output" option, then it tries to pass stream without changes, if possible.

[Aleksoid1978]

Yeah, they all go out of sync for me...

You test with internal filter ?? If no - try with only internal filters(Audio Decoder).
I use MPC-BE only with internal filters and no have any A/V Sync issue.

[blackjack12]

Will post a sample when have the time but latest MPC-BE release and builds do not show PGS subtitles in Avatar. ... MPC-HC has no issues.

PGS subtitles for other samples appear fine without extensive testing. The Avatar PGS subs use an unusual font and color and have always been a tricky test case for subtitle viewing. MPC-HC has reproduced correctly for a long time and I believe (but not sure) that older MPC-BE versions worked without issue as well.

This is an MKV rip using MakeMKV direct from the BD and remuxed using latest mkvmerge version 6.3.

Good: All subtitles appear with correct font, color, etc.
MPC-HC latest release and development builds with integrated LAV filters.
MadVR 0.86.8 and EVRCP tested

Bad: No subtitles can be seen even though are available, forced, etc.
Latest MPC-BE release and test build
LAV 0.58.1 external filters and MPC-BE internal filters tested
MadVR 0.86.8 and EVRCP tested

Apologize this may not be detail needed but don't have the time to provide more.

Had made full switch to MPC-BE until found this issue and have now gone back to latest MPC-HC builds with internal LAV filters.

UPDATE Sample Post:
Sample posted here - https://www.dropbox.com/sh/imu7ac8ki3ehmwj/1ke92p39ls
Sample must be downloaded and not just previewed in Dropbox.

[Aleksoid1978]

Will post a sample when have the time but latest MPC-BE release and builds do not show PGS subtitles in Avatar. ... MPC-HC has no issues.

PGS subtitles for other samples appear fine without extensive testing. The Avatar PGS subs use an unusual font and color and have always been a tricky test case for subtitle viewing. MPC-HC has reproduced correctly for a long time and I believe (but not sure) that older MPC-BE versions worked without issue as well.

This is an MKV rip using MakeMKV direct from the BD and remuxed using latest mkvmerge version 6.3.

Good: All subtitles appear with correct font, color, etc.
MPC-HC latest release and development builds with integrated LAV filters.
MadVR 0.86.8 and EVRCP tested

Bad: No subtitles can be seen even though are available, forced, etc.
Latest MPC-BE release and test build
LAV 0.58.1 external filters and MPC-BE internal filters tested
MadVR 0.86.8 and EVRCP tested

Apologize this may not be detail needed but don't have the time to provide more.

Had made full switch to MPC-BE until found this issue and have now gone back to latest MPC-HC builds with internal LAV filters.

UPDATE Sample Post:
Sample posted here - https://www.dropbox.com/sh/imu7ac8ki3ehmwj/1ke92p39ls
Sample must be downloaded and not just previewed in Dropbox.

Test - subtitle display with internal splitter & LAV + EVR CP. If you have issue - can you make a screen capture(video).

[blackjack12]

Thanks for quick reply

Yes - the internal splitter with MPC-BE "fixed" the issue with EVRCP, did not test yet with MadVR but assume it will be fine there as well.

... But why does LAV splitter work fine with MPC-HC ... ?

Have you found other issues with the LAV splitter? I have been using for a long time and it has been my standard.

[Aleksoid1978]

Thanks for quick reply

Yes - the internal splitter with MPC-BE "fixed" the issue with EVRCP, did not test yet with MadVR but assume it will be fine there as well.

... But why does LAV splitter work fine with MPC-HC ... ?

Have you found other issues with the LAV splitter? I have been using for a long time and it has been my standard.

LAV Splitter work fine with MPC-BE. I test you sample with LAV too and all ok, subtitle is displayed.

[blackjack12]

LAV Splitter work fine with MPC-BE. I test you sample with LAV too and all ok, subtitle is displayed.

That's interesting ... when I use the LAV splitter it does not work on any of 5 different systems tested ... :confused:

[wanezhiling]

Works fine here: http://i.imgur.com/kjbaxcc.jpg

Update your LAV and reset it (Delete [HKEY_CURRENT_USER\Software\LAV])

[blackjack12]

Works fine here: http://i.imgur.com/kjbaxcc.jpg

Update your LAV and reset it (Delete [HKEY_CURRENT_USER\Software\LAV])

Thanks ... I will try it and found that with the default LAV splitter config it was selecting "forced" PGS subs which these are not.

When viewing splitter output and selecting "default" they play fine.

If turn off the "Enable automatic forced sutitle stream" in LAV Splitter all is fine again ...

Something is behaving differently and LAV is seeing "forced" when not there.

I did do a reset and it was not the issue. Still had to change the LAV splitter not to use "Enable automatic forced ..." which is the default.

Bottom line ... the same file works with the default LAV splitter settings with MPC-HC and not MPC-BE ... ? Correctable, but something has changed.

[wanezhiling]

@blackjack12, Uncheck "Default track preference" under Playback tab in MPC-BE.

[blackjack12]

@blackjack12, Uncheck "Default track preference" under Playback tab in MPC-BE.

Thanks ... that did it! ... :thanks:

[ontherocks]

ontherocks
wasapi is a different way to render audio. Phrase "equivalent to bit-exact" makes no sense in this context. When you tick that "Allow bit-exact output" option, then it tries to pass stream without changes, if possible.
Thanks for the info.

[ontherocks]

How do you display the video details on top of video as mentioned here (http://forum.doom9.org/showpost.php?p=1633391&postcount=1227)

http://i.imgur.com/iHJFHLX.png

[onomatopellan]

How do you display the video details on top of video as mentioned here (http://forum.doom9.org/showpost.php?p=1633391&postcount=1227)

http://i.imgur.com/iHJFHLX.png
CONTROl+J

[ontherocks]

CONTROl+J
Thanks :thanks:

[ontherocks]

How am I able to control volume in MPC BE in spite having WASAPI Exclusive?

[z_mashine]

How am I able to control volume in MPC BE in spite having WASAPI Exclusive?

as well as usual.

[ontherocks]

as well as usual.
Oh I see.
I was under the impression that all sorts of volume controls & DSPs become ineffective in WASAPI.

[wanezhiling]

http://forum.doom9.org/showpost.php?p=1636617&postcount=15670
Same is mpc-be

[Aleksoid1978]

http://forum.doom9.org/showpost.php?p=1636617&postcount=15670
Same is mpc-be

I know - it's happened because ffmpeg's developer rewrite code for demux & decode wavpack. But in mkv in't store at old method :)

I think developer's of mkvtoolnix do not change method of store wavpack format.

[wanezhiling]

Oh thanks, i uploaded a new clip with 2 audios.:)

[nevcairiel]

The mkv format will most likely never change, so i changed the mkv demuxer to generate the new format in LAV, and all works again.

[Mercury_22]

Weird bug = rename any file to .tif (or any name that contains this group e.g. .tif.mp4, .tif.mkv, test.tif.mkv, test.tif.mp4, test.tiftest.mp4 ... ) and MPC-BE won't play it or even crash (MPC-HC doesn't have this problem)

[Aleksoid1978]

Weird bug = rename any file to .tif (or any name that contains this group e.g. .tif.mp4, .tif.mkv, test.tif.mkv, test.tif.mp4, test.tiftest.mp4 ... ) and MPC-BE won't play it or even crash (MPC-HC doesn't have this problem)

Fix :)

[wanezhiling]

XySubFilter has been released (http://forum.doom9.org/showthread.php?t=168282), which supports external PGS/HDMV subtitles as well.

Something must be wrong... default settings (means EVR-CP and auto-load sub option on), XySubFilter is loaded unexpectedly (http://i1.tietuku.com/2013/0719/17/13742566907546.png) when playing embedded-sub files and no sub is shown in mpc-be, same behavior in mpc-hc while sub is shown.

[pirlouy]

I think you're aware of it, but it seems you have to do something (http://forum.doom9.org/showthread.php?p=1637522#post1637522) in order to have external subs to work with XySubFilter.

[arrgh]

Hi
maybe a stupid question, but are there any plans/chances that a playback of 3D-mkv files, like those generated by MakeMkv, might be possible in future?

[06_taro]

For anyone who do not want to rename mpc-be to mpc-hc ( like me ):

xy-VSFilter_3.1.0.546-mod.7z (http://tmod.nmm-hd.org/VSFilter/xy-VSFilter_3.1.0.546-mod.7z)
xy-VSFilter_3.1.0.546-mod-with-pdb.7z (http://tmod.nmm-hd.org/VSFilter/xy-VSFilter_3.1.0.546-mod-with-pdb.7z)

Just added mpc-be to the same list of mpc-hc's workaround ( patch included ). The rest should work as same as official (http://forum.doom9.org/showthread.php?t=168282) 3.1.0.546. So if there're some other auto-loading issues with mpc-be, like this (http://forum.doom9.org/showthread.php?p=1637413#post1637413) one, they should still exist as before.

[pirlouy]

Thank you man ! :-)

[Keiyakusha]

Oh wow. It looks like soon all opensource software that I use will have a suffix "tMod" :D
Thanks 06_taro!

[ontherocks]

Could the "Display Stats" text be forced to maintain a certain aspect ratio when you change the MPC BE window size by dragging with mouse. Currently though the video aspect ratio is maintained, the display stats text goes berserk.

[giannifante]

SRT subtitle problem

Version: 1.2.1.0 build 3073
If I play a video "video.mts" in a folder that contains a subtitle file "video.mts.srt" subtitles are shown correctly, but if I put same video in a playlist (pls or m3u) subtitles are not visible.
Note that same test works with version 1.1.0.1 where subtitles are shown correctly using a playlist.

Thanks for help.

[Thingol]

http://aleksoid.voserver.net/MPC-BE/mplayerc.tr.rc.txt
Turkish language file updated.

https://dl.dropboxusercontent.com/u/11769082/mplayerc.tr.rc.txt

[alexins]

Turkish language file updated.

https://dl.dropboxusercontent.com/u/11769082/mplayerc.tr.rc.txt

:thanks:

[Aleksoid1978]

SRT subtitle problem

Version: 1.2.1.0 build 3073
If I play a video "video.mts" in a folder that contains a subtitle file "video.mts.srt" subtitles are shown correctly, but if I put same video in a playlist (pls or m3u) subtitles are not visible.
Note that same test works with version 1.1.0.1 where subtitles are shown correctly using a playlist.

Thanks for help.

Test just now - and all ok. Even if open video from playlist - subtitle is autoloading good.

[giannifante]

Test just now - and all ok. Even if open video from playlist - subtitle is autoloading good.

That is strange, I use pls playlists like this
..
file1=./video/video1.mts
file2=./video/video2.mts
...

and subtitles are not autoloaded; could the relative paths be the problem?
ty

[Aleksoid1978]

That is strange, I use pls playlists like this
..
file1=./video/video1.mts
file2=./video/video2.mts
...

and subtitles are not autoloaded; could the relative paths be the problem?
ty

Yes - i see. Fixed at rev. 3091;

[Blakeniel]

Hey guys! quick question. So, the Visual Studio 2012 version is the standard now? cause I don't see the new builds at sourceforge project page.
Only the VS2012 version is available at dev. forum.

[Blakeniel]

ps: I mean for the new builds. sorry

[Aleksoid1978]

Just a man who upload them on sf - on vacation now.

[Blakeniel]

Ok, thanks for the quick reply.

[giannifante]

Yes - i see. Fixed at rev. 3091;

Thank you!!
I will test the new build when it will be available.

[Aleksoid1978]

Thank you!!
I will test the new build when it will be available.

Test :)
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe.x86.3094.7z

[giannifante]

Test :)
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe.x86.3094.7z

Tested.. works perfectly. Thanks

[Mercury_22]

MPC-BE it's failing to build on a new / clean "SVN checkout" but running build a second time without changing anything results in a successful build.

So this 1>------ Build started: Project: system, Configuration: Release Win32 ------
2>------ Build started: Project: BaseClasses, Configuration: Release Win32 ------

...

3>d:\mpc-be\src\apps\mplayerc\../../../Include/Version.h(30): fatal error C1083: Cannot open include file: 'Version_rev.h': No such file or directory (InternalPropertyPage.cpp)

...

73>LINK : fatal error LNK1181: cannot open input file 'D:\MPC-BE\bin\lib\Release_Win32\Filters.lib'
========== Build: 69 succeeded, 2 failed, 0 up-to-date, 2 skipped ==========
is happening ONLY at the first build on a clean / new "checkout"

Then after the second build command 1>------ Build started: Project: Filters (Libraries\Filters), Configuration: Release Win32 ------
2>------ Build started: Project: openjpeg, Configuration: Release Win32 ------
2> openjpeg_2012.vcxproj -> D:\MPC-BE\bin\lib\Release_Win32\openjpeg.lib
3>------ Build started: Project: ffmpeg, Configuration: Release Win32 ------
1> InternalPropertyPage.cpp
1> Filters_2012.vcxproj -> D:\MPC-BE\bin\lib\Release_Win32\Filters.lib
4>------ Skipped Build: Project: VSFilter, Configuration: Release Filter Win32 ------
4>Project not selected to build for this solution configuration
5>------ Skipped Build: Project: DeCSSFilter, Configuration: Release Win32 ------
5>Project not selected to build for this solution configuration
3> make.exe: Nothing to be done for `all'.
6>------ Build started: Project: mpc-be, Configuration: Release Win32 ------
6> SubWCRev: 'D:\MPC-BE'
6> Last committed at revision 3098
6> Updated to revision 3099
6> mpc-be_2012.vcxproj -> D:\MPC-BE\bin\mpc-be_x86\mpc-be.exe
========== Build: 4 succeeded, 0 failed, 67 up-to-date, 2 skipped ==========


P.S. I'm using VS2012 U3 and "Cross-Compile toolchain: Mingw-w64, with GCC 4.7.3 (Stable). (http://dev.mpc-next.ru/index.php/topic,1403.0.html)"

[alexins]

1>------ Build started: Project: system, Configuration: Release Win32 ------
2>------ Build started: Project: BaseClasses, Configuration: Release Win32 ------

...

3>d:\mpc-be\src\apps\mplayerc\../../../Include/Version.h(30): fatal error C1083: Cannot open include file: 'Version_rev.h': No such file or directory (InternalPropertyPage.cpp)

...

73>LINK : fatal error LNK1181: cannot open input file 'D:\MPC-BE\bin\lib\Release_Win32\Filters.lib'
========== Build: 69 succeeded, 2 failed, 0 up-to-date, 2 skipped ==========


The cause of the error is incorrect execution of SubWCRev.

[Aleksoid1978]

MPC-BE it's failing to build on a new / clean "SVN checkout" but running build a second time without changing anything results in a successful build.

So this 1>------ Build started: Project: system, Configuration: Release Win32 ------
2>------ Build started: Project: BaseClasses, Configuration: Release Win32 ------

...

3>d:\mpc-be\src\apps\mplayerc\../../../Include/Version.h(30): fatal error C1083: Cannot open include file: 'Version_rev.h': No such file or directory (InternalPropertyPage.cpp)

...

73>LINK : fatal error LNK1181: cannot open input file 'D:\MPC-BE\bin\lib\Release_Win32\Filters.lib'
========== Build: 69 succeeded, 2 failed, 0 up-to-date, 2 skipped ==========
is happening ONLY at the first build on a clean / new "checkout"


Yes there is a problem when you first start build.bat.
Fixed at rev. 3109

[Mercury_22]

Yes there is a problem when you first start build.bat.
Fixed at rev. 3109

I wasn't using build.bat and it's still not fixed

To reproduce:

1. Create a new MPC-BE folder and run "SVN checkout" (svn://mpc-next.ru/mpc-be/trunk)
2. Run the update_gcc.bat
3. Open mpc-be_2012.sln and change to release
4. Run build (from VS2012 U3)

EDIT running build.bat at first results in this now SubWCRev: 'D:\MPC-BE'
Last committed at revision 3111
Updated to revision 3111
Not all build dependencies were found.

See "docs\Compilation.txt" for more information.


Press any key to exit...


P.S. I'm using VS2012 U3 and "Cross-Compile toolchain: Mingw-w64, with GCC 4.7.3 (Stable). (http://dev.mpc-next.ru/index.php/topic,1403.0.html)" and TortoiseSVN 1.8.1, Build 24570 - 64 Bit


EDIT 2 Or maybe I'm missing something and then "docs\Compilation.txt" needs to be updated

[THX-UltraII]

I have a specific request for a custom version of MPC-BE:

I need a DUAL AUDIO OUTPUT option like you can find it in this version of MPC-HC (which is not beeing updated anymore):
http://htpcfordbox.over-blog.com/article-mpc-hc-and-lav-filters-for-htpc-and-d-box-89040282.html

Please install this MPC-HC version and you can see in the AUDIO OUTPUT option what I mean/need.

Would this be possible to custom make for me (and all other HTPC/D-Box users :)) based on the latest version of MPC-BE?

[v0lt]

MPC-BE v1.2.1.0 -dev build 3113 (VS2010) (http://dev.mpc-next.ru/index.php/topic,1663.msg9289.html#msg9289)

[Aleksoid1978]

I wasn't using build.bat and it's still not fixed

To reproduce:

1. Create a new MPC-BE folder and run "SVN checkout" (svn://mpc-next.ru/mpc-be/trunk)
2. Run the update_gcc.bat
3. Open mpc-be_2012.sln and change to release
4. Run build (from VS2012 U3)

EDIT running build.bat at first results in this now

P.S. I'm using VS2012 U3 and "Cross-Compile toolchain: Mingw-w64, with GCC 4.7.3 (Stable). (http://dev.mpc-next.ru/index.php/topic,1403.0.html)" and TortoiseSVN 1.8.1, Build 24570 - 64 Bit


EDIT 2 Or maybe I'm missing something and then "docs\Compilation.txt" needs to be updated

Try rev. 3115;

[THX-UltraII]

MPC-BE v1.2.1.0 -dev build 3113 (VS2010) (http://dev.mpc-next.ru/index.php/topic,1663.msg9289.html#msg9289)Is this already the build for me m8?!!

[ryrynz]

No, it's just an updated build.

[THX-UltraII]

ah, ok

[Mercury_22]

Try rev. 3115;

Building for the first time with build.bat it's working now !
But building for the first time from VS2012 U3 it's still failing with

1>------ Build started: Project: system, Configuration: Release x64 ------
2>------ Build started: Project: BaseClasses, Configuration: Release x64 ------

...


3>d:\mpc-be\src\apps\mplayerc\../../../Include/Version.h(30): fatal error C1083: Cannot open include file: 'Version_rev.h': No such file or directory (InternalPropertyPage.cpp)

...

72>LINK : fatal error LNK1181: cannot open input file 'D:\MPC-BE\bin\lib\Release_x64\Filters.lib'
========== Build: 68 succeeded, 2 failed, 0 up-to-date, 2 skipped ==========

Also is it normal that when building mpc-be_2012.sln only the Win32 release and even when building only the X64 release that this two folders "Filters_x86" and "mpc-be_x86_Debug" to be created in "...\MPC-BE\bin\" ? (only from VS2012 U3, not happening with the build.bat)

[Thingol]

I have an Optimus laptop. Intel HD 3000 + GT630M. I have set mpc-be.exe to the discrete GPU on NVIDIA Control Panel. When I open a video and go to Play > Filters > MPC Video Decoder menu, it says the video card is Intel HD 3000.

[Aleksoid1978]

Building for the first time with build.bat it's working now !
But building for the first time from VS2012 U3 it's still failing with

1>------ Build started: Project: system, Configuration: Release x64 ------
2>------ Build started: Project: BaseClasses, Configuration: Release x64 ------

...


3>d:\mpc-be\src\apps\mplayerc\../../../Include/Version.h(30): fatal error C1083: Cannot open include file: 'Version_rev.h': No such file or directory (InternalPropertyPage.cpp)

...

72>LINK : fatal error LNK1181: cannot open input file 'D:\MPC-BE\bin\lib\Release_x64\Filters.lib'
========== Build: 68 succeeded, 2 failed, 0 up-to-date, 2 skipped ==========


Try rev. 3116;

[Aleksoid1978]

I have an Optimus laptop. Intel HD 3000 + GT630M. I have set mpc-be.exe to the discrete GPU on NVIDIA Control Panel. When I open a video and go to Play > Filters > MPC Video Decoder menu, it says the video card is Intel HD 3000.

Yes - it's normal. Decoder get active adapter from active monitor. It's Intel.
But if you prefered Nvidia adapter for mpc-be.exe - be use Nvidia.

[wanezhiling]

MPC-BE is one of the only few players which dont need a trick to run on dGPU (renaming), Cheers!

[nevcairiel]

MPC-BE is one of the only few players which dont need a trick to run on dGPU (renaming), Cheers!

Just because NVIDIA didn't put it onto the list yet, because it already is a renamed mpc-hc. :p

[Mercury_22]

Try rev. 3116;

It's fixed now :thanks:

Though I still get those two folders "Filters_x86" and "mpc-be_x86_Debug" created when building (with VS2012 and not happening when using build.bat) just mpc-be64.exe or mpc-be.exe, but if that is normal.........

[Aleksoid1978]

Though I still get those two folders "Filters_x86" and "mpc-be_x86_Debug" created when building (with VS2012 and not happening when using build.bat) just mpc-be64.exe or mpc-be.exe, but if that is normal.........

Do not pay any attention :)

[LDD9O]

With MPC-HC now adding LAVfilters as the default filters will MPC-BE be following this path?

Bug report: Options > Interface > OSD
does not work when a video is open, it does work if no video is open though. Changing from default front size and color, then changing the volume when no video is open, vs when a video is open.

[turbojet]

Are there any advantages of switching to LAVfilters as opposed to using an installed lavfilters set to preferred? One disadvantage is having to control 2 different LAVfilters if you want to use it outside of MPC, which could be an advantage depending on how it's used.

Potplayer has an interesting way of handling subtitles. An option to show subtitles below the video that is top justified so 1 liners are closer to the video, additional lines are below it but the lines will move up on to the video instead of disappearing. MPC is always bottomed justified, 1 liners go to the bottom, additional lines go up, lines will disappear instead of move up. Some examples (http://www.sendspace.com/file/zg2r2g) would there be interest in adding an option for this in MPC-BE?

Has there been any progress with auto hiding toolbars in window mode?

MPC+madvr with another program using gpu drops a lot of frames for me. Here's a bug report (http://bugs.madshi.net/view.php?id=103) for more information but it doesn't happen with Potplayer, maybe it's an MPC issue instead? Priority related?

[Aleksoid1978]

With MPC-HC now adding LAVfilters as the default filters will MPC-BE be following this path?

Bug report: Options > Interface > OSD
does not work when a video is open, it does work if no video is open though. Changing from default front size and color, then changing the volume when no video is open, vs when a video is open.

All work for me. If do not work at you side - can you make a screen video and reproduce this bug.

[THX-UltraII]

I have a specific request for a custom version of MPC-BE:

I need a DUAL AUDIO OUTPUT option like you can find it in this version of MPC-HC (which is not beeing updated anymore):
http://htpcfordbox.over-blog.com/article-mpc-hc-and-lav-filters-for-htpc-and-d-box-89040282.html

Please install this MPC-HC version and you can see in the AUDIO OUTPUT option what I mean/need.

Would this be possible to custom make for me (and all other HTPC/D-Box users ) based on the latest version of MPC-BE?
V0lt already replied to me on the official MPC-BE community that this would be possible to do and that the MPC-HC version that was made here http://en.sourceforge.jp/projects/sfnet_mpc-hc-dboite/ is done with a ''system Infinite Pin Tee Filter'' to separate the audio stream.

In the following link you can also find a post made by the author of the special MPC-HC version for D-Box users where I might have some basics to do it myself:
http://forum.doom9.org/showpost.php?p=1529077&postcount=18224
Could someone maybe help me on my way to make a MPC-BE version with Dual Audio Output?

[Aleksoid1978]

V0lt already replied to me on the official MPC-BE community that this would be possible to do and that the MPC-HC version that was made here http://en.sourceforge.jp/projects/sfnet_mpc-hc-dboite/ is done with a ''system Infinite Pin Tee Filter'' to separate the audio stream.

In the following link you can also find a post made by the author of the special MPC-HC version for D-Box users where I might have some basics to do it myself:
http://forum.doom9.org/showpost.php?p=1529077&postcount=18224
Could someone maybe help me on my way to make a MPC-BE version with Dual Audio Output?

Tomorrow everything will be ready :)

[THX-UltraII]

Tomorrow everything will be ready :)

Are you FREAKIN serious!!!@#^&%$@#&^@#
That would be AWE-SOME

What is it with russian people! I m also quite familiar with Smooth Video Project (SVP) which is also made by russians and they are also VERY kind and always help me out with requests etc.

Will it be a one-time inplemented feature on the latest beta version that is avialable now or will you build updated versions with dual audio support from time-to-time from now on?

You have no idea what a feature like this means for D-Box users. It will be THE ONLY htpc solution available for D-Box users who want to enjoy HD audio and D-Box simultanously.

[Aleksoid1978]

Dual audio support will be implemented always on :)

[THX-UltraII]

Dual audio support will be implemented always on :)
How can I donate?

[nevcairiel]

It will be THE ONLY htpc solution available for D-Box users who want to enjoy HD audio and D-Box simultanously.

You do realize there are other players that can do this, right?
For example, JRiver Media Center can output audio to any audio devices you want (with its Linked Zone feature) and even encode to AC3 on one device for SPDIF and output PCM over HDMI on another.

So, its not the only, and not the first solution.

Anyhow, sorry for the OT in this thread, but someone was wrong on the internet. :)

[TOM_SK]

@Aleksoid
Just wanted to drop you a line to say a BIG thank you for the amazing job you did on MPC-BE!

On a different note: since DmitriRender (http://www.dmitrirender.ru/) is a DirectShow filter (minimal, less bloated than SVP) is there any chance to see it implemented into MPC-BE or something similar in the near feature?

[Aleksoid1978]

Dual audio output support - http://aleksoid.voserver.net/MPC-BE/mpc-be_x86.3135.7z
Test please.

One condition - AudioSwitcher must enabled;

[Aleksoid1978]

@Aleksoid
Just wanted to drop you a line to say a BIG thank you for the amazing job you did on MPC-BE!

On a different note: since DmitriRender (http://www.dmitrirender.ru/) is a DirectShow filter (minimal, less bloated than SVP) is there any chance to see it implemented into MPC-BE or something similar in the near feature?

DmitriRender - is a paid component. How i do implement into player ?

[Blakeniel]

Hey guys,
Is there an advantage or disadvantage using vs210 build vs. vs2012 build?

[Aleksoid1978]

Hey guys,
Is there an advantage or disadvantage using vs210 build vs. vs2012 build?

It does not matter which version.

[Blakeniel]

Thanks! Then may I ask, why we have 2 versions?

[THX-UltraII]

Dual audio output support - http://aleksoid.voserver.net/MPC-BE/mpc-be_x86.3135.7z
Test please.

One condition - AudioSwitcher must enabled;

Just tested. It seems to work almost good already. I have simultaneously audio output but the only problem is that I only get the core signal on my AVR (So no DTS-MA but only DTS). My D-Box decoder receives the (core) signal that it needs perfect.

http://s12.postimg.org/s4j0afiyx/Untitled.jpg (http://postimg.org/image/s4j0afiyx/)

http://s23.postimg.org/8r1f2w25j/Untitled.jpg (http://postimg.org/image/8r1f2w25j/)

http://s15.postimg.org/uv33de4gb/Untitled3.jpg (http://postimg.org/image/t3a4ihl3b/full/)
free image hosting (http://postimage.org/)

ps. On the second picture you see my D-Box software that works perfect with this version of MPC-BE! (Optical Sync notification which means that it works)

[Aleksoid1978]

THX-UltraII
Your AVR support DTS-HD ?? What setting in LAVAudio. How it's work in previous version with only one audio output ??

P.S. I think i understand what happened - if D-Box decoder support only DTS(core), audio decoder failed from DTS-HD bitstream to DTS core only. As you see - use only one audio decoder.

[THX-UltraII]

THX-UltraII
Your AVR support DTS-HD ?? What setting in LAVAudio. How it's work in previous version with only one audio output ??

My AVR supports DTS, DD, True-HD, DTS-MA etc etc. I have the newest topmodel from Onkyo.

Settings in LAV are the settings I always use: checkboxes with Dolby Digital (AC-3), Doly Digital Plus (E-AC3), Dolby TrueHD, DTS and DTS-HD.

I can tell you that with this MPC-HC version that has dual-audio output implemented it works http://en.sourceforge.jp/projects/sfnet_mpc-hc-dboite/. Also with that version it is not needed to check the BUILD-IN AUDIO SWITCHER option. It works with and without this option. (ps. With 'IT WORKS' i mean that i the core DTS track is send to my d-box decoder and the DTS-MA track is send to my AVR)

P.S. I think i understand what happened - if D-Box decoder support only DTS(core), audio decoder failed from DTS-HD bitstream to DTS core only. As you see - use only one audio decoder.I m not following you here. Can you try to explain again in other words?
You ARE right that the D-Box decoder ONLY works when it receives the UNALTERED CORE signal, so the core dts or Dolby Digital track. So I use my on-board spdif audio 'card' for the D-Box decoder (you can see this as soundcard 1) and motherboards HDMI output (you can see this as soundcard 2) for my AVR (which passes through the picture and hopefully will pass through the lossless DTA-MA or True-HD track soon :))

[THX-UltraII]

EDIT:
I have more information for you. (I m at work and will be back home within a few hours so I can give you better information that you might need):

With the MPC-HC version made by a D-Box user http://en.sourceforge.jp/projects/sfnet_mpc-hc-dboite/ I did always see TWO times LAV Audio Decoder in the filter list when playing a movie. With the version you made you can see that I only see ONE lav Audio Decoder in the filter list when playing a movie.

Maybe this information is important for you?

[Aleksoid1978]

Multiply AudioDecoder for one audio track it's a bad idea. I make - multiply output from audio decoder to different audio renderer.

My English is bad, so I can not explain all the reasons it is such an implementation. But - as is done in mpc-hc-dboite - bad, and does not always work.

[THX-UltraII]

Multiply AudioDecoder for one audio track it's a bad idea. I make - multiply output from audio decoder to different audio renderer.

My English is bad, so I can not explain all the reasons it is such an implementation. But - as is done in mpc-hc-dboite - bad, and does not always work.I have had no problems with the mpc-hc-dboite version. To me it seems that it works good but of course you are a specialist and I am not :)

What is your plan on making it work for me?

[THX-UltraII]

And another little question: how can i choose what to do after playback? I want mpcbe to auto close after playing one time

[SamKook]

And another little question: how can i choose what to do after playback? I want mpcbe to auto close after playing one time

Menu Play->After Playback->Exit(The one in the every time section)

[wanezhiling]

http://pan.baidu.com/share/link?shareid=4287665566&uk=3558042035
Image stops since 14sec, LAV splitter works fine.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=4287665566&uk=3558042035
Image stops since 14sec, LAV splitter works fine.

Thanks. Fixed.

[mindbomb]

were the problems with av sync and wasapi solved?
the discussion about it in this thread sorta just disappeared.

[SamKook]

Seems good with the internal audio decoder at least. I finally set up my htpc properly 2 days ago to test it and haven't had sync problems yet. I'll try again with LAV and see what happens.

[Aleksoid1978]

I also use MPC Audio Renderer + WASAPI Exclusive + internal audio decoder. Use bitstream output and via decoding to PCM, and also good, no A/V desync.

[THX-UltraII]

Hi Alek,

Did you get my PM maybe?

Are you planning on looking for a fix for the feature I m looking for in MPC-BE?

[Aleksoid1978]

Hi Alek,

Did you get my PM maybe?

Are you planning on looking for a fix for the feature I m looking for in MPC-BE?

No planned yes use multiple audio decoder for dual audio support.
There are many nuances.
Example - how to be with external audio files ? If use LAVSplitter & only internal audio stream all will be ok, but if use internal splitter, use external audio files(dub) - we can't split audio decoders for each of audio streams.

[LDD9O]

All work for me. If do not work at you side - can you make a screen video and reproduce this bug.


OSD show fine with no video (yellow colour)
showing the OSD setting
opening a video file
OSD no longer show yellow colour, it now the default colour

http://i.imgur.com/pz0j13W.gif

[Aleksoid1978]

OSD show fine with no video (yellow colour)
showing the OSD setting
opening a video file
OSD no longer show yellow colour, it now the default colour

http://i.imgur.com/pz0j13W.gif

You use madVR - it's use own OSD and it's settings can not be changed.

[Rapsody10]

Hello

Getting up to 100 cpu
Any ideas as of why and how to fix it ?

Mpc-be x64 any of the latest versions
Version 1.0.3.1x64 works ok 7-10 %cpu
the only External filter is AC3 everything else is default


Thanks in advance
Raps

[Aleksoid1978]

Hello

Getting up to 100 cpu
Any ideas as of why and how to fix it ?

Mpc-be x64 any of the latest versions
Version 1.0.3.1x64 works ok 7-10 %cpu
the only External filter is AC3 everything else is default


Thanks in advance
Raps

Can you provide MediaInfo for file, filters list and screen from TaskManager(include all process).

[Mercury_22]

Any chance you'll add audio equalizer and independent volume for every audio channel ( like in ffdshow (http://ffdshow-tryout.sourceforge.net/images/front3.png)) ?

[Aleksoid1978]

Any chance you'll add audio equalizer and independent volume for every audio channel ( like in ffdshow (http://ffdshow-tryout.sourceforge.net/images/front3.png)) ?

Maybe ... sometimes :)

[turbojet]

Is there any interest in the subtitle enhancement I mentioned at http://forum.doom9.org/showthread.php?p=1638901#post1638901

and the issue with MPC+MadVR dropping frames?

Had to switch players because of it.

[Aleksoid1978]

Is there any interest in the subtitle enhancement I mentioned at http://forum.doom9.org/showthread.php?p=1638901#post1638901

and the issue with MPC+MadVR dropping frames?

Had to switch players because of it.

About subtitle - i do not understand what you want ... english is bad.

About MadVR drop frames - what filter you use. Try only with internal and what result ??

[turbojet]

It's kind of tough to explain and I'm horrible at explaining things. The goal is to get the subtitles as close to the of the bottom of the video without disappearing. MPC puts one line subs where the last line would go with multiple lines, asking for it to go where the first line would go, near the bottom border. Subs also disappear in MPC when bottom margin is negative if there is no bottom border, instead they should show on the video. MPC would need an option to show subtitles off the video (if possible) which could be controlled by the current top and bottom options.

Same problem with internal filters, backbuffer keeps running out in MPC so dropped frames. In potplayer decoder queue drops a bit but backbuffer stays full and no dropped frames.

[ƒreeman]

It's kind of tough to explain and I'm horrible at explaining things. The goal is to get the subtitles as close to the of the bottom of the video without disappearing. MPC puts one line subs where the last line would go with multiple lines, asking for it to go where the first line would go, near the bottom border. Subs also disappear in MPC when bottom margin is negative if there is no bottom border, instead they should show on the video. MPC would need an option to show subtitles off the video (if possible) which could be controlled by the current top and bottom options.

Same problem with internal filters, backbuffer keeps running out in MPC so dropped frames. In potplayer decoder queue drops a bit but backbuffer stays full and no dropped frames.

Maybe you can post screens... :cool:

[THX-UltraII]

No planned yes use multiple audio decoder for dual audio support.
There are many nuances.
Example - how to be with external audio files ? If use LAVSplitter & only internal audio stream all will be ok, but if use internal splitter, use external audio files(dub) - we can't split audio decoders for each of audio streams.

Isn t it possible to make what MPC-HC-Dboite looks like? I know you say it is a bad idea but it works for me so if you could add this 'dual audio decoder' option I (and all D-Box/HTPC users out there) would be thankful to you eternally.

The only thing I (and all other D-Box users) use are the LAV filters (audio, video and splitter) and madVR as renderer. ALL internal filters DISabled.

ps. You may have already seen that the mpc-hc-dboite version DISabled the internal audio switcher. Don t know if this is important information for you but I thought to just mention it.

We D-Box users would be so happy if you can make this for us!

[Aleksoid1978]

Isn t it possible to make what MPC-HC-Dboite looks like? I know you say it is a bad idea but it works for me so if you could add this 'dual audio decoder' option I (and all D-Box/HTPC users out there) would be thankful to you eternally.

The only thing I (and all other D-Box users) use are the LAV filters (audio, video and splitter) and madVR as renderer. ALL internal filters DISabled.

ps. You may have already seen that the mpc-hc-dboite version DISabled the internal audio switcher. Don t know if this is important information for you but I thought to just mention it.

We D-Box users would be so happy if you can make this for us!

Maybe only for you ... i think about this. But it's can be only a temporary version.

[THX-UltraII]

Maybe only for you ... i think about this. But it's can be only a temporary version.It would be no problem at all if you make a temporary version of this only for me and not update it. And IF a very important update comes out I could always ask you to make a updated version for me?

Please let me know if I can help you with anything on building it for me or if you need me to test a version. I REALLY hope you can make this for me! Donation? :)

[v0lt]

MPC-BE v1.2.1.0 -dev build 3211 (VS2010) (http://dev.mpc-next.ru/index.php/topic,1700.msg9600.html#msg9600)

[turbojet]

Maybe you can post screens... :cool:

Original post has a link to screenshots to the subs http://www.sendspace.com/file/zg2r2g

Not sure if showing gpu/cpu, empty backbuffer would be of any benefit.

[ƒreeman]

Original post has a link to screenshots to the subs http://www.sendspace.com/file/zg2r2g

Not sure if showing gpu/cpu, empty backbuffer would be of any benefit.

I know what you mean,, I tried those too with mpc but no success.. maybe it doesn't have this option..

[Warlock]

Guys, you can configure mpc-be so he always open videos in 1280x720 resolution? No matter what the resolution of the video, I just want to mpc-be open always in 1280x720. I'm trying to understand the logic que applies to the Auto setting under Auto Fit Zoom in MPC. I do not get it. With it set as default, some videos are resized to somewhere in between 100% & 200% size, while others are resized to greater than 200% size of the original video. I can not figure out the logic that's used by the program to determine what it resizes to. Does anyone know how this setting works or what it does exactly? Is to configure it manually?

[SamKook]

Opening a 720p video and then disabling the auto-zoom option should do the trick in theory.

[Warlock]

Opening a 720p video and then disabling the auto-zoom option should do the trick in theory.

Still did not work. I tested some videos here of 640x480, the maximum that remained was 960x720. Before they were all in 1280x720 when I used the autofit option, but I had to uninstall mpc is corrupted by yesterday. After that, I could not use at 720p, now the autofit choose on their own.

[SamKook]

One detail I realized I forgot to mention while testing this is that you have to have the "remember last window position" option enabled for it to work. It's working fine on my computer that way.
You have to completely uncheck the auto-zoom option though, not use autofit(which I have no idea what it actually does).

[Warlock]

One detail I realized I forgot to mention while testing this is that you have to have the "remember last window position" option enabled for it to work. It's working fine on my computer that way.
You have to completely uncheck the auto-zoom option though, not use autofit(which I have no idea what it actually does).

I did what you said, but did not solve the problem. For example, videos with 640x480, 1280x720 usually climbed before with autofit on, now with the hint that you taught me, the mpc scale 1280x720, but the video only opens at 960x720 with black borders on the sides.

[the_weirdo]

I did what you said, but did not solve the problem. For example, videos with 640x480, 1280x720 usually climbed before with autofit on, now with the hint that you taught me, the mpc scale 1280x720, but the video only opens at 960x720 with black borders on the sides.

You can try this: View -> Video Frame -> uncheck Keep Aspect Ratio (you can even choose Override Aspect Ratio to 16:9), but do you really want to watch distorted video, because 640x480 video have 4:3 AR.

[SamKook]

videos with 640x480... the mpc scale 1280x720, but the video only opens at 960x720 with black borders on the sides.

That's normal and the intended behavior since most wouldn't want to watch a stretched video.
If that's really what you want, do what the_weirdo said and it should stretch it, but it seems that it doesn't.

I tested it and my 4:3 video stays in 4:3 even with Keep aspect ratio unchecked and Override aspect ratio to 16/9 so it seem to be a bug.
In fact, none of the options under Video Frame seem to have any effect on the video under those conditions.


Edit: OK, did a bit more testing and it seems that EVR can't change the size or the aspect ratio of the video(I forgot I still had it on since I last tested something). It works fine with EVR CP and madvr, but you have to check "Keep aspect ratio" for the "Override aspect ratio" to "16:9" to work which seems like a pretty odd behavior(MPCHC is the same), but at least it works.

[alexins]

MPC-BE 1.2.1.0.3232 Dev.:

MPC-BE 1.2.1.0.3232 Dev (VS2010 & VS2012) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203232/) (sourceforge.net)
MPC-BE 1.2.1.0.3232 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1714.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3232&er=3232&max=40&search=)

[Keiyakusha]

Aleksoid
These EVR Sync settings seem out of place where they are now. Maybe you can make something like this (https://dl.dropboxusercontent.com/u/110558786/DesktopScreens/F40BE971.png)?

Also options from File --> renderer settings can be moved there too

[wanezhiling]

http://pan.baidu.com/share/link?shareid=1441302698&uk=3558042035
Flac crash..
Works fine with lav splitter

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=1441302698&uk=3558042035
Flac crash..
Works fine with lav splitter

Playback is ok, seeking too ...

[wanezhiling]

I just reset build 3232 and play it, crash immediately

[Aleksoid1978]

I just reset build 3232 and play it, crash immediately

Test with default settings - all ok.

[wanezhiling]

I just let my colleagues test on their PCs, crash too.

We all use MPC-BE.1.2.1.0.3232.x86.exe, default setting.

[Aleksoid1978]

I just let my colleagues test on their PCs, crash too.

We all use MPC-BE.1.2.1.0.3232.x86.exe, default setting.

Try this - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe.7z

[wanezhiling]

Still crash


Maybe you could see this: http://dev.mpc-next.ru/index.php/topic,1714.msg9707.html#msg9707

[alexins]

MPC-BE 1.2.1.0.3237 Dev.:

MPC-BE 1.2.1.0.3237 Dev (VS2010 & VS2012) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203237/) (sourceforge.net)
MPC-BE 1.2.1.0.3237 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1720.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3237&er=3237&max=40&search=)

[Lord Maius]

ITA txt language file updated (rev.3194)
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt
:)

[wiak]

hey please add something like this playing info
still working on my paint.net editing skillz

playing info, would be cool to have options in settings to show codec info, resolution info in their own lines
https://dl.dropboxusercontent.com/s/un0u7dg15fazbw7/mpc-be_codecs_bitrate_view.png?token_hash=AAFEcuzj3J9Z9ftqRzoiBEh5oV5lYow5hj3qBZPzZVHWlw&dl=1

current
https://dl.dropboxusercontent.com/s/xzh0doc2cw15otv/Capture003-20130823-004330.png?token_hash=AAG2U_p77mnRVEUiHoSKnsIV7xXTmyboSxrRyaPpQoihdQ&dl=1

:stupid:

[hello_hello]

I'm running MPC-BE v1.2.0.3.2938 on XP. Nvidia 8600GT video card.

I quite like MPC-BE, but, is there a way to get pixels shaders to work I might have missed? I've tried everything, even opening MPC-HC's options and making sure the MPC-BE settings are identical (obviously for MPC-HC, they work). I'm using VMR9 (renderless). "3D surfaces" is selected.

When I try enabling a pre-resize pixel shader, MPC-BE displays a "cannot load shader" error in the status bar. When I use a post-resizer shader, nothing happens. I've also noticed opening the shader editer and selecting a shader always results in an error message "unexpected compiler error".

Thanks.

[beter]

I'm running MPC-BE v1.2.0.3.2938 on XP. Nvidia 8600GT video card.

I quite like MPC-BE, but, is there a way to get pixels shaders to work I might have missed? I've tried everything, even opening MPC-HC's options and making sure the MPC-BE settings are identical (obviously for MPC-HC, they work). I'm using VMR9 (renderless). "3D surfaces" is selected.

When I try enabling a pre-resize pixel shader, MPC-BE displays a "cannot load shader" error in the status bar. When I use a post-resizer shader, nothing happens. I've also noticed opening the shader editer and selecting a shader always results in an error message "unexpected compiler error".

Thanks.

In order to use pixel shader, you need to install the latest DirectX 9.0c runtime (June 2010) (the link can be found at the top of this topic), OR to place D3DCompiler_43.dll and d3dx9_43.dll in MPC-BE folder.

MPC-HC included these two files, you may copy them from MPC-HC directly.

[Reino]

I have a DXVA1 issue with a probably rare use case.
It concerns the following 2 files:
POW_00678246-audio_eng=192000-video=900000.ts (http://www.degeelebosch.nl/reino/POW_00678246-audio_eng=192000-video=900000.ts)
POW_00678246-audio_eng=128000-video=500000.ts (http://www.degeelebosch.nl/reino/POW_00678246-audio_eng=128000-video=500000.ts)
These are m3u8-playlists representing a television show on Dutch national television. They list more than 350 dynamic MPEG-TS streams.
I renamed them to *.ts so you can watch the entire show in MPC-BE (and MPC-HC). Otherwise they're treated as ordinary playlists and every 5sec a new segment needs to be loaded.
(I saved the playlists locally because I had to add the full url to all entries to make it work)

ffmpeg/ffplay reports the following:
POW_00678246-audio_eng=192000-video=900000.ts

Input #0, hls,applehttp, from '<path>\POW_006
78246-audio_eng=192000-video=900000.ts':
Duration: 00:49:13.00, start: 1.040000, bitrate: 0 kb/s
Program 0
Metadata:
variant_bitrate : 0
Stream #0:0: Audio: aac ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 167 kb/s
Stream #0:1: Video: h264 (Main) ([27][0][0][0] / 0x001B), yuv420p, 608x342 [SAR 1:1 DAR 16:9], 1
2.50 fps, 25 tbr, 90k tbn, 50 tbc
POW_00678246-audio_eng=128000-video=500000.ts

Input #0, hls,applehttp, from '<path>\POW_006
78246-audio_eng=128000-video=500000.ts':
Duration: 00:49:13.00, start: 1.040000, bitrate: 0 kb/s
Program 0
Metadata:
variant_bitrate : 0
Stream #0:0: Audio: aac ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 128 kb/s
Stream #0:1: Video: h264 (Constrained Baseline) ([27][0][0][0] / 0x001B), yuv420p, 416x234 [SAR
1:1 DAR 16:9], 12.50 fps, 25 tbr, 90k tbn, 50 tbc

Now, with POW_00678246-audio_eng=128000-video=500000.ts everything looks fine:
http://www.ld-host.de/uploads/thumbnails/262b917bf4afdaa1c756f33e3c810187.jpg (http://www.ld-host.de/uploads/images/262b917bf4afdaa1c756f33e3c810187.jpg)
WinXP, VMR9 (DXVA1)

...but with POW_00678246-audio_eng=192000-video=900000.ts the MPC Video Decoder is having some trouble:
http://www.ld-host.de/uploads/thumbnails/8d19876a2555067e3a8962b4b1142a32.jpg (http://www.ld-host.de/uploads/images/8d19876a2555067e3a8962b4b1142a32.jpg)
WinXP, VMR9 (DXVA1)

No problem with software on the other hand, or with DXVA2 on Win7:
http://www.ld-host.de/uploads/thumbnails/fd566a4b07dc59d68c4826ff926bee7f.jpg (http://www.ld-host.de/uploads/images/fd566a4b07dc59d68c4826ff926bee7f.jpg)___http://www.ld-host.de/uploads/thumbnails/33559b701a6263feba4817f25ccb6368.jpg (http://www.ld-host.de/uploads/images/33559b701a6263feba4817f25ccb6368.jpg)
WinXP, VMR9 (non-DXVA)_____Win7, EVR-custom (DXVA2, LAV Filters)

ffmpeg.exe -i "%1" -bsf:a aac_adtstoasc -c copy "%~dpn1.mp4"No problems at all playing this mp4.
Thought I'd report it.

[THX-UltraII]

I have setup my Logitech Harmony Remote with a MCI IR receiver and Eventghost software. This works like a charm with MPC-BE. However I would like to know if it is possible to fast forward in steps. With this I mean: press one time on forward mean x2 (or something), press another time means x6 and press another time means x20.

[Lord Maius]

Oops, Little mistake
mplayerc.it.rc.txt rev (3238)
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt
:)

[alexins]

MPC-BE 1.2.1.0.3253 Dev.:

MPC-BE 1.2.1.0.3253 Dev (VS2010 & VS2012) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203253/) (sourceforge.net)
MPC-BE 1.2.1.0.3253 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1725.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3253&er=3253&max=40&search=)

[hello_hello]

In order to use pixel shader, you need to install the latest DirectX 9.0c runtime (June 2010) (the link can be found at the top of this topic), OR to place D3DCompiler_43.dll and d3dx9_43.dll in MPC-BE folder.

MPC-HC included these two files, you may copy them from MPC-HC directly.

Thank you.
Oddly enough I thought I had copied them from the MPC-HC folder but it turned out I'd only copied one. Pixel shaders now work and I managed to modify the "BT.601 to BT.709" pixel shader so it'll work regardless of the video resolution. Why it only works for HD video by default (same as MPC-HC) is beyond me, given correcting the colours of SD video encoded using BT.709 (ie most SD encodes taken from HD sources) is when you're most likely to want to use it these days.
I probably should work out how to rename it too, given "BT.601 to BT.709" is the exact opposite of what it actually does.

Cheers.

[ryrynz]

Would it be possible to get the installer to have the ability to silent install without Windows 8 prompting for file associations at the end?

[jellysandwich]

Thanks for this awesome app - it's so much smoother and slicker than MPC-HC.

I was wondering, have you guys looked into playback via standard input? MPC-HC added this feature in about 2 months ago:

https://github.com/mpc-hc/mpc-hc/commit/68801edd2603b936f2c836ae6f76026426cd0496

I'm not sure how hard it would be to copy over, but it'd be really nice as I'm currently having to use both MPC-BE (regular playback) and MPC-HC (livestreams).

[alexins]

MPC-BE 1.2.1.0.3269 Dev.:

MPC-BE 1.2.1.0.3269 Dev (VS2010 & VS2012) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203269/) (sourceforge.net)
MPC-BE 1.2.1.0.3269 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1729.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3269&er=3269&max=40&search=)

[ryrynz]

3270 - Updated code for DBOX users with regards to Dual Audio output.

Somebody's going to be happy.

[VipZ]

Not sure if it's still a WIP, Shoutcast no longer display's the current song playing but rather just the title of the server. This seemed to happen once the UDP reader was enabled for HTTP.

Here's some URL's that used to work,
http://stream-186.shoutcast.com/energy98_181fm_mp3_128kbps
http://stream-70.shoutcast.com:80/listen.pls?sid=1

[Aleksoid1978]

Not sure if it's still a WIP, Shoutcast no longer display's the current song playing but rather just the title of the server. This seemed to happen once the UDP reader was enabled for HTTP.

Here's some URL's that used to work,
http://stream-186.shoutcast.com/energy98_181fm_mp3_128kbps
http://stream-70.shoutcast.com:80/listen.pls?sid=1

Thanks - i see.
Fixed at 3278 :)

[VipZ]

Thanks - i see.
Fixed at 3278 :)

Thanks for the quick fix :)

EDIT: Is there a way to increase the buffer as the 1st URL above sometimes cuts out, this also didn't really happen until recently but could break up, which doesn't happen anymore. Internet connection is not the issue.

[alexins]

MPC-BE 1.2.1.0.3282 Dev.:

MPC-BE 1.2.1.0.3282 Dev (VS2010 & VS2012) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203282/) (sourceforge.net)
MPC-BE 1.2.1.0.3282 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1741.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3281&er=3270&max=40&search=)

[alexins]

MPC-BE 1.2.1.0.3297 Dev.:

MPC-BE 1.2.1.0.3297 Dev (VS2010 & VS2012) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203297/) (sourceforge.net)
MPC-BE 1.2.1.0.3297 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1743.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3296&er=3283&max=40&search=)

[Knocks]

Great player, thank you. Any chance you might implement Google's APIs to stream from MPC-BE to Chromecast devices? This would be a great alternative to casting from a Chrome tab, which is very laggy.

[Mistar Muffin]

Chromecast supports only a limited number of codecs and containers. A large portion of any local media collection would probably need some sort of realtime transcoding performed before being sent to Chromecast. As such that work is probably better left to apps such as VLC and Plex.

EDIT:

https://developers.google.com/cast/supported_media_types

[IanD]

Is it possible to add HDMV menu support to MPC? That's the only thing preventing my playback of Bluray without having to install a commercial player.

[Knocks]

Chromecast supports only a limited number of codecs and containers. A large portion of any local media collection would probably need some sort of realtime transcoding performed before being sent to Chromecast. As such that work is probably better left to apps such as VLC and Plex.

EDIT:

https://developers.google.com/cast/supported_media_types

The link says: "All Google Cast devices at a minimum support the following media types." Sounds like they're just laying out the minimum requirements to qualify under the devices program (and there aren't any 3rd party devices yet).

Chromecast will show anything that a Chrome tab will play, including flash video and web games (with a huge lag, of course).

[Aleksoid1978]

Is it possible to add HDMV menu support to MPC? That's the only thing preventing my playback of Bluray without having to install a commercial player.

At near features - no ...

[dukey]

You could use dslibbluray :) HDMV support is pretty much rock solid, unlike the java part.

[Aleksoid1978]

You could use dslibbluray :) HDMV support is pretty much rock solid, unlike the java part.

I have no time, and knowledge, too - to implement it :)

[Lich King]

Amazing Player.. Previously, i was using PotPlayer but i had lot of bugs.. with this, everything is very smooth..

Thanks a lot guys for the hard work..

[alexins]

MPC-BE 1.2.1.0.3308 Dev.:

MPC-BE 1.2.1.0.3308 Dev (VS2010 & VS2012) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203308/) (sourceforge.net)
MPC-BE 1.2.1.0.3308 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1745.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3307&er=3298&max=40&search=)

[dukey]

I have no time, and knowledge, too - to implement it :)

You only need to instanciate a few filters in the filter graph, and pass key presses to the filter and you are done. Most of the interface is the same or identical to the DVD navigator filter.

[Aleksoid1978]

You only need to instanciate a few filters in the filter graph, and pass key presses to the filter and you are done. Most of the interface is the same or identical to the DVD navigator filter.

Where can i see sample of code or documentation ??

[dukey]

Check out
http://sourceforge.net/p/dslibbluray/code/241/tree/trunk/demo_player/DShowPlayer.cpp#l451
It's a very basic dshow app, built for testing dslibbluray. You can copy/paste most of the code needed.

This is the actual plugin API
http://sourceforge.net/p/dslibbluray/code/241/tree/trunk/dslibbluray/IBDNav.h#l130

[pureocean]

@Aleksoid1978:

Since then MPC-HC's svn 7503 dropped DXVA support for NT 5.x (XP/2003), I use standalone
filters of MPC-BE. Firstly, thank all very much you and other developers for support continue and updating.

There is two major bug MPCVidDec and MpaDecFilter of MPC-BE standalone filters.

Bug #1: MpaDecFilter cann't play audio in DVB-S streams. But MPC-HC-MpaDecFilter (Svn:7503) can play audio
without problem. I tried ProgDVB with SmartDVB. It's same. Likewise Mplayer2.exe(6.4).
MPC Audio Decoder can't play the audio. In instead of MpaDecFilter, Microsoft MPEG Audio Dedocer come into play. :)
The solution: regsvr32 /u MpaDecFilter.ax (in mpc-be)
regsvr32 MpaDecFilter.ax (in mpc-hc 7503)

I'd capture a debug TS sample video&audio. The sample download: http://ge.tt/api/1/files/7bTkwyq/0/blob?download

Bug #2: MPCVidDec cannot settle with AviSynth, cannot the AVS play. Potplayer nor Virtualdub nor
Media Player 6.4, can open the Avisyth file. But again mpc-hc 7503 filter working. Again same the solution:
regsvr32 /u MPCVideoDec.ax (in mpc-be)
regsvr32 MPCVideoDec.ax (in mpc-hc 7503)

I uploaed a sample video (included AVS): http://ge.tt/api/1/files/93wG4zq/0/blob?download

[Aleksoid1978]

@Aleksoid1978:
Bug #1: MpaDecFilter cann't play audio in DVB-S streams. But MPC-HC-MpaDecFilter (Svn:7503) can play audio
without problem. I tried ProgDVB with SmartDVB. It's same. Likewise Mplayer2.exe(6.4).
MPC Audio Decoder can't play the audio. In instead of MpaDecFilter, Microsoft MPEG Audio Dedocer come into play. :)
The solution: regsvr32 /u MpaDecFilter.ax (in mpc-be)
regsvr32 MpaDecFilter.ax (in mpc-hc 7503)

I'd capture a debug TS sample video&audio. The sample download: http://ge.tt/api/1/files/7bTkwyq/0/blob?download


Playback fine in MPC-BE and as standalone filter.

[Aleksoid1978]

@Aleksoid1978:
Bug #2: MPCVidDec cannot settle with AviSynth, cannot the AVS play. Potplayer nor Virtualdub nor
Media Player 6.4, can open the Avisyth file. But again mpc-hc 7503 filter working. Again same the solution:
regsvr32 /u MPCVideoDec.ax (in mpc-be)
regsvr32 MPCVideoDec.ax (in mpc-hc 7503)

I uploaed a sample video (included AVS): http://ge.tt/api/1/files/93wG4zq/0/blob?download

I can't do playback this .avs sample, not in MPC-HC, PotPlayer ... black screen

[pureocean]

Again hello Aleksoid1978,

Yeah, MPC-BE can playback the sample .TS video&audio. MPC Audio Decoder working. But expect Mpc-Be, in other application, MpcaudioDec cannot working. For example, Potplayer-DVB applications. On the other side MPC-HC's MpaDecFilter (7503) can play any apps. Strange.

Could you test with mplayer2.exe (microsoft media player 6.4) the .ts file?

[Aleksoid1978]

Again hello Aleksoid1978,

Yeah, MPC-BE can playback the sample .TS video&audio. MPC Audio Decoder working. But expect Mpc-Be, in other application, MpcaudioDec cannot working. For example, Potplayer-DVB applications. On the other side MPC-HC's MpaDecFilter (7503) can play any apps. Strange.

Could you test with mplayer2.exe (microsoft media player 6.4) the .ts file?

Test in graphstudio - good :)
http://s015.radikal.ru/i331/1309/c6/840c29b5e724t.jpg (http://radikal.ru/fp/93fae57ab81c4311ac9f85d754a244ee)

[Reino]

I can't do playback this .avs sample, not in MPC-HC, PotPlayer ... black screenNo problem here with MPCVideoDec.ax from MPC-BE 1.2.1.0.3308, but pureocean shouldn't be using DirectShowSource() for video editing in the first place :p.

post1641465 is something you can't do anything about, Aleksoid?

[Aleksoid1978]

No problem here with
post1641465 is something you can't do anything about, Aleksoid?

For me - url from playlist is not work. What i can do ??
If you save stream on HD it's play as local file ??

[pureocean]

Thanks Aleksoid1978 & CoRoNe.

I found the source of the problem. The Merits!

MPC-BE-MpaDecFilter using as Default Merit: 0x00600001
MPC-HC-MpaDecFilter using as Default Merit: 0x40000001
( http://i.imgur.com/IkaCToi.jpg )

I changed MPC-BE-MpaDecFilter's merit with DSFMgr. As 0x40000001.
Woola! Suddenly fixed.

I recommend you changing as 0x40000001 that default Merit of MpaDecFilter.

My Os: Windows 2003 sp2, Radeon HD 3200, Catalyst 13.4

[Reino]

For me - url from playlist is not work. What i can do ??
If you save stream on HD it's play as local file ??What do you mean? Does the link for the playlist on my website (http://www.degeelebosch.nl/reino/POW_00678246-audio_eng=192000-video=900000.ts) not work for you, or the actual link of the ts-segments (http://l24m6c61b66d1c0052154323000000.2579b4606778978a.adaptive-e10c4a.npostreaming.nl/lmshieldv2/3/bnn/rest/2013/POW_00678246/POW_00678246.ism/POW_00678246-audio_eng%3D192000-video%3D900000-1.ts) in the playlist? If the latter, then I guess the television show is geo-restricted/blocked (meaning only Dutch IP-addresses can watch it).

With...
ffmpeg.exe -i "POW_00678246-audio_eng=192000-video=900000.ts" -bsf:a aac_adtstoasc -c copy "output.mp4"...FFmpeg splices all the 5sec segments together again. It sees the playlist (renamed to ts) as one long videoclip. Playing this local file is no problem at all.

No problem if you can't reproduce. It's not such a big issue, but thought I'd report it anyway in case television shows in other countries have a simular dynamic approach.

[Reino]

I just noticed MPC-BE doesn't show embedded cover-art in flac and wavpack files anymore.
Rev.3126 still shows them, while Rev.3139 doesn't.

[Aleksoid1978]

I just noticed MPC-BE doesn't show embedded cover-art in flac and wavpack files anymore.
Rev.3126 still shows them, while Rev.3139 doesn't.

All ok. Sure that use internal splitter.

[bwo_j]

titlebar gibberish for xysubfilter only on 1st instance.

Play video first in window mode, go to full screen, stop (Ctrl+C) in fullscreen, return to window mode. Repeatable only for the 1st instance of a newly launched mpc-be. Video filename is in english characters & standard symbols.

xyvsfilter no issue.

http://i.imgur.com/bxaw4TK.png (http://imgur.com/bxaw4TK.png)

Cyberbeing said that it's unlikely to be xysubfilter's bug.

Thanks for taking a look.

XP SP3 (ENG Locale)/8600GT/MPC-BE 3297/Madvr 0.86.10/Lavfilters 0.58.2

[Reino]

All ok. Sure that use internal splitter.Sorry, I spoke too soon. It's only the WavPack Splitter that doesn't show embedded cover-art as from Rev.3139. Flac Source is all fine.

[Aleksoid1978]

Sorry, I spoke too soon. It's only the WavPack Splitter that doesn't show embedded cover-art as from Rev.3139. Flac Source is all fine.

Try latest SVN build.

[alexins]

MPC-BE 1.2.1.0.3329 Dev.:

MPC-BE 1.2.1.0.3329 Dev (VS2010 & VS2012) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203329/) (sourceforge.net)
MPC-BE 1.2.1.0.3329 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1756.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3328&er=3309&max=40&search=)

[Reino]

WavPack Splitter issue fixed. Thanks!

Thank you for the TAK Splitter and Decoder. Like LAV based on FFmpeg's reverse-engineered TAK Decoder I take it?

Доработка функции CorrectWaveFormatEx. Заполняем пустое поде dwChannelMask после DC-Bass Source Mod 1.5.2.0 (проверено на многоканальных TAK-файлах).Google Translate wasn't particularly helpfull, so what does this commit say/do?

Пока находится на начальной стадииI understand "it's still alpha/beta", but there seems to be something wrong with seeking. There's no sound for the first 2 to 3 seconds and the whole timeline (seekbar) is off.
As a result navigating the embedded cue-sheet also goes wrong. The 2nd cue-entry/audiotrack of the sample I sent you pm starts at 01:35 instead of 01:24. 3rd starts at 06:39 instead of 06:16, etc.

Next,... at the moment "PERFORMER" (Artist) is always shown (for WavPack and FLAC as well) in the Navigate-menu as; 01. Artist-1 - Audiotrack_Titel-1. For...
REM GENRE Classical
PERFORMER "Various Artists"
TITLE "Album_name"
FILE "Sample.tak" WAVE
TRACK 01 AUDIO
TITLE "Audiotrack_Title-1"
PERFORMER "Artist-1"
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "Audiotrack_Title-2"
PERFORMER "Artist-2"
INDEX 01 09:13:38
TRACK 03 AUDIO
TITLE "Audiotrack_Title-3"
PERFORMER "Artist-3"
INDEX 01 15:16:38...that's perfectly fine, but for most cases...
REM GENRE Rock
PERFORMER "Artist-X"
TITLE "Album-Y"
FILE "Sample.tak" WAVE
TRACK 01 AUDIO
TITLE "Audiotrack_Title-1"
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "Audiotrack_Title-2"
INDEX 01 01:24:03
TRACK 03 AUDIO
TITLE "Audiotrack_Title-3"
INDEX 01 06:16:73...where there's only 1 artist, I'd say omit "PERFORMER"; 01. Audiotrack_Titel-1.
In addition it would be really neat if you could let MPC-BE display "Title %TITLE%" and "Author %PERFORMER%" on the Information-tab (Ctrl+3).

Could you enable the Zoom-function (Alt+1-4) for covert-art too, and have it auto-zoom to 100% if that function is enabled in Option->Playback?About Zoom for Cover - do not planned.Still not planned?
If some idiots decide to embed 3000x3000 cover-art, render it at 480x480, or 720x720 max, I'd say.

[alexins]

MPC-BE 1.2.1.0.3370 Dev.:

MPC-BE 1.2.1.0.3370 Dev (VS2010 & VS2012) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203370/) (sourceforge.net)
MPC-BE 1.2.1.0.3370 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1761.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3369&er=3351&max=40&search=)

[arrgh]

Hi
maybe a stupid question, but are there any plans/chances that a playback of 3D-mkv files, like those generated by MakeMkv, might be possible in future?

Besides of the above question, I have an other question/request :
I am mainly using mkv...they are taged (title, genre, actors, director, year,...) and have a cover; I am using the MKVTagger for this.
It would be nice to have a library function in mpc-be to be able to select a video by those tags...

[XRyche]

I'm having issues with getting DirectVobSub(autoloading) 3.0.0.211 xy-vsfilter to load and display/chose more than 1 subtitle with MPC-BE 1.2.0.3 when auto-load subtitles is unchecked. When auto-load subtitles is checked the internal subtitle renderer takes control (of course, expected behavior). Is this suppose to happen?

[Aleksoid1978]

I'm having issues with getting DirectVobSub(autoloading) 3.0.0.211 xy-vsfilter to load and display/chose more than 1 subtitle with MPC-BE 1.2.0.3 when auto-load subtitles is unchecked. When auto-load subtitles is checked the internal subtitle renderer takes control (of course, expected behavior). Is this suppose to happen?

Use 1.2.1.0, see post above.

[XRyche]

Use 1.2.1.0, see post above.

TYVM, xy-vsfilter is now loading all subtitle choices correctly now :) .

[Mercury_22]

X64 version it's failing to build (x86 it's building OK) on a new/clean SVN checkout1>------ Build started: Project: ffmpeg, Configuration: Release x64 ------
2>------ Build started: Project: openjpeg, Configuration: Release x64 ------
1>
1> Unsupported commandline switch!
1> Run "ffmpeg.bat help" for details about the commandline switches.
3>------ Skipped Build: Project: VSFilter, Configuration: Release Filter x64 ------
3>Project not selected to build for this solution configuration
4>------ Skipped Build: Project: DeCSSFilter, Configuration: Release x64 ------
4>Project not selected to build for this solution configuration
2> openjpeg_2012.vcxproj -> D:\MPC-BE\bin12\lib\Release_x64\openjpeg.lib
5>------ Build started: Project: mpc-be, Configuration: Release x64 ------
5> SubWCRev: 'D:\MPC-BE'
5> Last committed at revision 3385
5> Updated to revision 3385
5>LINK : fatal error LNK1181: cannot open input file 'D:\MPC-BE\bin12\lib\Release_x64\ffmpeg.lib'
========== Build: 2 succeeded, 1 failed, 68 up-to-date, 2 skipped ==========

P.S. I'm using VS2012U4RC

[Aleksoid1978]

X64 version it's failing to build (x86 it's building OK) on a new/clean SVN checkout1>------ Build started: Project: ffmpeg, Configuration: Release x64 ------
2>------ Build started: Project: openjpeg, Configuration: Release x64 ------
1>
1> Unsupported commandline switch!
1> Run "ffmpeg.bat help" for details about the commandline switches.
3>------ Skipped Build: Project: VSFilter, Configuration: Release Filter x64 ------
3>Project not selected to build for this solution configuration
4>------ Skipped Build: Project: DeCSSFilter, Configuration: Release x64 ------
4>Project not selected to build for this solution configuration
2> openjpeg_2012.vcxproj -> D:\MPC-BE\bin12\lib\Release_x64\openjpeg.lib
5>------ Build started: Project: mpc-be, Configuration: Release x64 ------
5> SubWCRev: 'D:\MPC-BE'
5> Last committed at revision 3385
5> Updated to revision 3385
5>LINK : fatal error LNK1181: cannot open input file 'D:\MPC-BE\bin12\lib\Release_x64\ffmpeg.lib'
========== Build: 2 succeeded, 1 failed, 68 up-to-date, 2 skipped ==========

P.S. I'm using VS2012U4RC

I know - fix after weekend :)

[Reino]

Rev.3370 still has the TAK-seeking-bug. Or haven't you looked into it yet?

[ryrynz]

Had a flick through the SVN notes and I don't see anything about TAK from 3370 - 3386, so I'd say he hasn't looked at it yet.

[Aleksoid1978]

Rev.3370 still has the TAK-seeking-bug. Or haven't you looked into it yet?

About what you talk about ??

[Reino]

post1643003

[beter]

For the FLAC tag bug, is the cause(s) known?
MPC-BE crashes if both of them are present:
1, The FLAC tag contains any characters with codepoints that larger than U+00FF.
2, Non-Unicode Program language setting in Control Panel is set as an East-Asian Language (Traditional Chinese, Simplified Chinese, Japanese, Korean).

If I set this setting as English, Russian, etc, it wouldn't crash.
And if I use Piaip AppLocale to run MPC-BE as Russian(But not English), it also wouldn't crash.

http://i.imgur.com/dxR6EGN.jpg

[agustin9]

I have a problem using the "left down" mouse button for Fullscreen (w/o res.change) hotkey in both windowed and fullscreen.

It enters fullscreen but doesn't leave it.

This stills happens in mpcbe, but not in mpchc, please fix it!

[alexins]

MPC-BE 1.2.1.0.3390 Dev.:

MPC-BE 1.2.1.0.3390 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203390/) (sourceforge.net)
MPC-BE 1.2.1.0.3390 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1768.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3389&er=3371&max=40&search=)

[Aleksoid1978]

This stills happens in mpcbe, but not in mpchc, please fix it!

Can't reproduce. Left mouse key - is default for enter & leave fullscreen. And it's work.

[Aleksoid1978]

post1643003

Ok - i see.

[agustin9]

Can't reproduce. Left mouse key - is default for enter & leave fullscreen. And it's work.
The default is left doubleclick, and that works, I'm talking about left down

[Aleksoid1978]

The default is left doubleclick, and that works, I'm talking about left down

Try this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_LDOWN.7z

[agustin9]

It works with that build, thanks!!

[Mercury_22]

@Aleksoid
Can you Please, Please ... change this default setting (= left down) for "Play/Pause" mouse key with anything else (suggestion: "middle down") cause it's the worst default setting ever
In fact it's the only default settings AFAIK, that has and it's still creating problems all the time (you can find them all over the MPC-HC/BE SVN bug fix logs)
And as usability it's a nightmare, since is getting in the way all the time, e.g. when trying to drag / move MPC-BE window, enter /exit full screen (if you don't double click fast enough you are pausing the video) ....

Why keeping this default setting for this key when it's only creating problems ?

[agustin9]

I use right down for play/pause and left down for fullscreen, but it's a matter of taste

[Mercury_22]

I use right down for play/pause and left down for fullscreen, but it's a matter of taste

Exactly my point = the default "Left Down" for Play / Pause it's the worst possible choice! And the majority of users are not using it anyway so why keep it as default ?

[bozek]

...almost time for another stable build, wouldn't you say?

[Lich King]

...almost time for another stable build, wouldn't you say?

It's not about time.. it's about being stable..

[alexins]

MPC-BE 1.2.1.0.3401 Dev.:

MPC-BE 1.2.1.0.3401 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203401/) (sourceforge.net)
MPC-BE 1.2.1.0.3401 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1770.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3400&er=3391&max=40&search=)

[Aleksoid1978]

post1643003

Test TAK Seeking - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_TAK_Seeking.7z

[Reino]

Seeking seems to be accurate, but I get occasional freeze-ups (MPC-BE 'Not responding') when I'm navigating cue-entries. This didn't happen with Rev.3370. It would be nice of anyone else could also confirm the freeze-ups.
Thanks for your effort so far! ;)

[Aleksoid1978]

Seeking seems to be accurate, but I get occasional freeze-ups (MPC-BE 'Not responding') when I'm navigating cue-entries. This didn't happen with Rev.3370. It would be nice of anyone else could also confirm the freeze-ups.
Thanks for your effort so far! ;)

Are you sure ?? I test on sample that you send to PM. Try redownload file from link and test again. If it's happened - give me a sample .tak file - i see.

[ryrynz]

Regarding MPC freezes, I sometimes play partially downloaded files and when MPC can't read them (BE & HC) the whole programs just freezes up. Can anything be done about that?

[Reino]

Are you sure ?? I test on sample that you send to PM.I wish I was joking, but I'm not. It happens on that very sample I sent you via PM yes. Maybe a MPC-BE version creating a dump-file for you to have a look at would be an idea?

[Aleksoid1978]

I wish I was joking, but I'm not. It happens on that very sample I sent you via PM yes. Maybe a MPC-BE version creating a dump-file for you to have a look at would be an idea?

Thanks - i take more test and see what happened. Fixed in nearest features :)

[Aleksoid1978]

I wish I was joking, but I'm not. It happens on that very sample I sent you via PM yes. Maybe a MPC-BE version creating a dump-file for you to have a look at would be an idea?

Fix - testing http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_TAK_Seeking_2.7z

[Reino]

I'm sorry to say, but it still freezes on that sample. Not anymore while navigating the cue-entries, but now while navigating the Seek Bar. It happens less often than with 'mpc-be.exe_TAK_Seeking' before, but still.

Upon testing some full-sized music albums I almost got the feeling you've only fixed accurate seeking for the sample I PMed you, because when navigating the image-tracks of the music albums, the accuracy is again way off! The song already started or is due to start in sometimes 30sec.
And 1 or 2 freeze-ups as well.

[alexins]

MPC-BE 1.2.1.0.3420 Dev.:

MPC-BE 1.2.1.0.3420 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203420/) (sourceforge.net)
MPC-BE 1.2.1.0.3420 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1773.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3419&er=3402&max=40&search=)

[Reino]

I noticed mpc-be.exe_TAK_Seeking_2 is based on Rev.3411. You should've put up Rev.3413 for testing, Aleksoid1978, because with Rev.3420 here all problems are gone! No more freeze-ups and accurate seeking for all tak-files. Thanks for your time! Where can I donate? :p

[kerimcem]

3420=better colors,not dark
a good thing..

[Lord Maius]

ITA txt language file updated. Rev 3416

https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt
:)

[hello_hello]

Try this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_LDOWN.7z

I've been having a similar left click problem for quite a while (I'm running XP). I came here looking for an answer and tried the build you linked to above, but it didn't fix the problem.
I usually have left click set to play/pause and middle click to enter/exit fullscreen. If I swap them around, play/pause works as it should but then MPC-BE won't enter/exit full screen mode reliably. Double left click works properly. I don't have a similar left click problem when using MPC-HC (although it behaves slightly differently.... see below).

Quite often, MPC-BE seems to respond to a left click (or not) in a somewhat repeatable fashion ie click one works, clicks two and three are ignored, click four works, five and six are ignored.....

At the moment, "left down" is working perfectly for play/pause while in fullscreen mode (maybe it always does, I'm not sure), but very intermittently in windowed/minimal mode. Tomorrow MPC-BE will probably lull me into a false scene of security and left click will work perfectly for a while, until it doesn't again.

I was playing around with MPC-HC/BE while writing this post and noticed they behave differently in respect to a single left click. In case it's a problem partly inherited from MPC-HC......

If "left down" is set to pause/play, MPC-HC won't let you move the window by left clicking on the video in windowed mode. MPC-BE does, so maybe having left click effectively perform two functions is a problem. With MPC-HC, single click stops working as play/pause when in minimal mode and can only be used to drag the video around. In minimal mode, MPC-BE still lets you use "left down" for both.
For some reason I can't get MPC-HC to use "left up" for play/pause at all, but "left up" works fine for something like entering/exiting fullscreen. MPC-BE seems to use "left up" for play/pause, although it only works intermittently in windowed mode and doesn't work at all for play/pause in fullscreen mode.

I don't know if any of the above will help, but thanks for MPC-BE anyway. :)

[Reino]

Aleksoid1978, or any other dev, could you please share your thoughts on the other remarks of my post1643003 about; svnlog mentioning DC-DSM, display Artist/Various Artists and cover scaling.

And something I noticed today: View -> Information (Ctrl+3) shows "Description" when Comment is present in Tag, but it doesn't show REM COMMENT in cue-sheet. Now you may expect me to request to show cue-sheet comments as well, but I don't how other users feel about it, but I don't care about "Description". I noticed LAV Splitter shows "Description" (if present) too, but I'm only interested in "Title" and "Author" on the Information-tab (Ctrl+3).

[Aleksoid1978]

Aleksoid1978, or any other dev, could you please share your thoughts on the other remarks of my post1643003 about; svnlog mentioning DC-DSM, display Artist/Various Artists and cover scaling.

And something I noticed today: View -> Information (Ctrl+3) shows "Description" when Comment is present in Tag, but it doesn't show REM COMMENT in cue-sheet. Now you may expect me to request to show cue-sheet comments as well, but I don't how other users feel about it, but I don't care about "Description". I noticed LAV Splitter shows "Description" (if present) too, but I'm only interested in "Title" and "Author" on the Information-tab (Ctrl+3).

I support tag only for internal splitter/source. If LAV do not give information about "Title"/"Author" - write author about this.

[hello_hello]

For some reason I can't get post resize pixel shaders to work when using VMR9 renderless. Pre resize pixel shaders work fine, but when enabling post resize shaders there's no notification they've been enabled in the status bar and they have no effect. If I switch to EVR Custom Presenter, post resize shaders then work.

For the record, both pre and post pixel shaders are working fine for MPC-HC with either VMR9 or EVR (I haven't bothered testing any other renderers). I'm running XP.

Thanks.

[73ChargerFan]

@Aleksoid
Can you Please, Please ... change this default setting (= left down) for "Play/Pause" mouse key with anything else
I like it. My 2 year old could do it, and I can do it with any mouse in the dark while watching a movie.

Edit - wait, are we talking about left mouse button?

[vood007]

May i suggest to add an option to turn off Left-Mouse dragging in video window? Or add a delay. I just happens too often that i accidently move the window instead play/pause.

[v0lt]

MPC-BE v1.2.1.0 -dev build 3466 (VS2010) (http://dev.mpc-next.ru/index.php/topic,1794.msg10329.html#msg10329)

[AngelGraves13]

Will MPC BE also be switching to LAV Filters like MPC HC?

[Aleksoid1978]

Will MPC BE also be switching to LAV Filters like MPC HC?

Of course no :)

[Aleksoid1978]

Please thoroughly check the seeking speed and accuracy, compared to SVN. Also you can compare the seeking speed with other products.
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_BDMV_Seek_Final_20131002.7z

[AngelGraves13]

Of course no :)

I use LAV, so it doesn't make a difference for me other than one less step during setup. It's actually a really good idea to go with LAV.

Would it be possible to get an option under the Audio button on the GUI for "Late Night Mode" that basically enables Normalization? It's faster than having to go into the settings and doing it.

[ryrynz]

I use LAV, so it doesn't make a difference for me other than one less step during setup. It's actually a really good idea to go with LAV.
[/B]

Aleksoid has no intention of going with LAV I think ever.
He personally likes dealing with the internal filters and knows how to fix them if required. It made sense for the HC team to go LAV since they lost Aleksoid.

I really want to see the playlist graphic fixed up (made dark) polish the BE plz :) It looks so half done. Performs wonderfully though.

[Mercury_22]

Please thoroughly check the seeking speed and accuracy, compared to SVN. Also you can compare the seeking speed with other products.
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_BDMV_Seek_Final_20131002.7z

Tested against x64 SVN using internal splitter and LAV audio & video decoders and I don't see any difference
I'll do more testing later and if anything changes I'll let you know

P.S. At this point I too would like to see, as ryrynz said, other parts of MPC-BE polish, added, improved, fixed rather than just splitters and decoders

[z_mashine]

Tested against x64 SVN using internal splitter and LAV audio & video decoders and I don't see any difference
I'll do more testing later and if anything changes I'll let you know

Aleksoid1978 forgot to specify that it should be tested on BD-disks/structures.

[ryrynz]

Someone paying attention would pick that up from the filename though.. ;)

[Mercury_22]

Aleksoid1978 forgot to specify that it should be tested on BD-disks/structures.

Of course I've tested "on BD-disks/structures"
My test was "visual" though :) didn't use any "tools"

[alexins]

MPC-BE 1.2.1.0.3474 Dev.:

MPC-BE 1.2.1.0.3474 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203474/) (sourceforge.net)
MPC-BE 1.2.1.0.3474 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1799.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3473&er=3443&max=40&search=)

[Poutnik]

I have multiple times seen at various software more VS20xx versions provided,
but I am always unsure what is the best choice for my Vista64 Home premium SP2 system.

Is it newer the better ?
Or, is less (compiler age - OS age ) better ?
Or, does it depend eventually just on VC++ redistributables installed ?

P.S.: It may be handy VC20xx choice legend in some Readme file within the file lists

[wanezhiling]

I always use VS2010 which is the most stable in theory.

[Poutnik]

It makes sense, as it may take the time to settle down and mature by SPs.

[ryrynz]

I always use VS2010 which is the most stable in theory.

Been using VS2013 builds since they were released with zero issues. Use the latest IMO.

[Aleksoid1978]

P.S. At this point I too would like to see, as ryrynz said, other parts of MPC-BE polish, added, improved, fixed rather than just splitters and decoders

Like what ??

[ryrynz]

Getting crashes in BE loading this file (http://www.mediafire.com/download/5urn3qsjbwrucfq/Kaleido_Star_-_51_-_To_the_Promise_s_Amazing_Location.mk) with MadVR and XYsubfilter enabled. No crashes in HC. Disabling XYsubfilter or MadVR prevents the crashes. Reset settings in BE and tried earlier versions and it still crashes.

Access violation at address $4a49b631 in module MadVR.ax read of address of $0

[Mercury_22]

Like what ??

Like being able to use the playlist with a remote control = keyboard (the playlist it needs to take focus after opening) and the other things you've told me you don't know how (Independent volume control for each channel like in FFDShow (http://ffdshow-tryout.sourceforge.net/images/front3.png) and Equalizer) but maybe other devs know how to

[Poutnik]

Been using VS2013 builds since they were released with zero issues. Use the latest IMO.

This makes sense too. Poor Poutnik ... :( :)

[the_weirdo]

This makes sense too. Poor Poutnik ... :( :)

If you're using Windows 7 or later, I think all three builds are stable. In case of mine, I have been using VS2012 builds from when they first released and haven't encountered any compiler-related issues yet.

P.S. Actually, I think you can choose any build. Performance wise, they're not difference.

[AngelGraves13]

The only thing missing from this player is...

Full-screen UI
Support for X-Box 360 controller (for play, stop, skip chapter/file)

[Aleksoid1978]

The only thing missing from this player is...

Full-screen UI
Support for X-Box 360 controller (for play, stop, skip chapter/file)

I don't have X-Box 360 controller

[XRyche]

I don't have X-Box 360 controller

Hint, hint. :sly:

[dukey]

If mpc-be supports winlirc you can use the xbox 360 controller through that

[THX-UltraII]

Hi guys,

I use MPC-BE with LAV filters. I want to use only external subtitles for my movies because that way I can change the position of the subtitles if I am correct.
I play mostly Blu-Ray folder (BDMV/CERTIFICATE) movies. I can manually add a .srt by dragging and dropping that .srt to the MPC-BE window of the movie that is playing. But I m wondering if there is a way to automatically load external subtitles (.srt) when the movie starts running.

[alexins]

MPC-BE 1.2.1.0.3501 Dev.:

MPC-BE 1.2.1.0.3501 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203501/) (sourceforge.net)
MPC-BE 1.2.1.0.3501 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1811.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3500&er=3496&max=40&search=)

[Sylt]

Which Build should I use? VS2010, VS2012, VS2013

[Aleksoid1978]

Which Build should I use? VS2010, VS2012, VS2013

Any build :)

[Mercury_22]

Hi guys,

I use MPC-BE with LAV filters. I want to use only external subtitles for my movies because that way I can change the position of the subtitles if I am correct.
I play mostly Blu-Ray folder (BDMV/CERTIFICATE) movies. I can manually add a .srt by dragging and dropping that .srt to the MPC-BE window of the movie that is playing. But I m wondering if there is a way to automatically load external subtitles (.srt) when the movie starts running.

Rename the srt file to index.srt and place it in the same folder with index.bdmv (=...\BDMV )

[Aleksoid1978]

THX-UltraII
Mercury_22

After svn rev. 3502 it's be much easy :)
Example:
you have BD in
C:\Movies\Avatar
C:\Movies\Die Hard 4
C:\Movies\Moulin Rouge
C:\Movies\The Ring
C:\Movies\Inception
C:\Movies\The Hunger Games
C:\Movies\Some_BD_Name

Create any dir, example c:\Subtitles\
and place you .srt/.ass(and any other supported subtitles format) here and rename:
Die Hard 4.str/Die Hard 4.eng.ass
Inception.rus.ass/Inception.new_style.srt
Some_BD_Name.srt/Some_BD_Name.English.ass
and so.

Than add c:\Subtitles\ in subtitles Autoload paths. That's all.
:)

[Mercury_22]

THX-UltraII
Mercury_22

After svn rev. 3502 it's be much easy :)
Example:
you have BD in
C:\Movies\Avatar
C:\Movies\Die Hard 4
C:\Movies\Moulin Rouge
C:\Movies\The Ring
C:\Movies\Inception
C:\Movies\The Hunger Games
C:\Movies\Some_BD_Name

Create any dir, example c:\Subtitles\
and place you .srt/.ass(and any other supported subtitles format) here and rename:
Die Hard 4.str/Die Hard 4.eng.ass
Inception.rus.ass/Inception.new_style.srt
Some_BD_Name.srt/Some_BD_Name.English.ass
and so.

Than add c:\Subtitles\ in subtitles Autoload paths. That's all.
:)

Thanks for the info :)

[Aleksoid1978]

MPC-BE.3505.x86 (http://aleksoid.voserver.net/MPC-BE/mpc-be_x86_3505.7z)
All files now are digitally signed.

[alexins]

MPC-BE 1.2.1.0.3518 Dev.:

MPC-BE 1.2.1.0.3518 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203518/) (sourceforge.net)
MPC-BE 1.2.1.0.3518 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1815.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3517&er=3502&max=40&search=)

[alexins]

MPC-BE 1.2.1.0.3526 Dev.:

MPC-BE 1.2.1.0.3526 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203526/) (sourceforge.net)
MPC-BE 1.2.1.0.3526 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1819.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3525&er=3519&max=40&search=)

[me7]

I just tried the player for the first time and noticed that the window size is always fixed at playback start. All files start at a resolution that looks like 480x320 or something similar. Whenever playing a file, I always need to set the zoom to 100% manually.
Is this a bug or desired behaviour by the developers?

[chway]

I just tried the player for the first time and noticed that the window size is always fixed at playback start. All files start at a resolution that looks like 480x320 or something similar. Whenever playing a file, I always need to set the zoom to 100% manually.
Is this a bug or desired behaviour by the developers?

Options / Playback and check "Auto-zoom: 100%"

[me7]

That fixed it. Thanks.

[iwod]

I have been looking for an option to repeat playing the same thing, I dont find anything in the playlist. Anyone knows if this option is available.

[ryrynz]

Goto the options find Playback down the left side, click on it.
Select the 'Repeat forever' radio button in the Playback area of the Playback page.

[bugmen0t]

are the zip files portable? ie no settings in registry

[wanezhiling]

No, but you could enable "Store settings to .ini file" option and then safely delete [HKEY_CURRENT_USER\Software\MPC-BE]

[ibbeebee]

Iv'e just installed madVR but it is still not available in MPC-BE
I Installed madVR in program files as instructed but also installed a copy inside the MPC-BE folder just in case.

My Operating System Windows & 64 bit

MPC-BE Version MPC-BE.1.2.1.0.3526.x64

Video Card HD 7970 thanks in advance for any help regards ibbeebee

I think I have the answer to my question is it still true that madVR isn't supported in 64 bit versions of MPC-BE?

[ryrynz]

That's because MadVR is 32 bit and you've installed the 64 bit MPC-BE.
Install the 32 bit version of MPC-BE.

[ibbeebee]

That's because MadVR is 32 bit and you've installed the 64 bit MPC-BE.
Install the 32 bit version of MPC-BE.

Yes I figured that out & have installed the 32 bit version of MPC-BE , I'm really impressed by madVR, just using it at default settings. My first experience was with 720 HDTV it looks fantastic & it seems to have also fixed a small issue I was having with speech sometimes not quite syncing or slight stuttering as well. I'm sure there's more that I can do but at the moment I'm really satisfied with both my sound & vision

[alexins]

MPC-BE 1.2.1.0.3557 Dev.:

MPC-BE 1.2.1.0.3557 Dev (VS2010 & VS2012& VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203557/) (sourceforge.net)
MPC-BE 1.2.1.0.3557 Dev (VS2010 & VS2012& VS2013) (http://dev.mpc-next.ru/index.php/topic,1833.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3556&er=3527&max=40&search=)

[filler56789]

Standalone filter MPCVideoDec.ax under Graphstudio:

if I tick the checkbox for "HEVC" and click "Apply/OK",

the checkbox "unticks itself" :confused:

and the HEVC decoder remains disabled :scared:

[Aleksoid1978]

Standalone filter MPCVideoDec.ax under Graphstudio:

if I tick the checkbox for "HEVC" and click "Apply/OK",

the checkbox "unticks itself" :confused:

and the HEVC decoder remains disabled :scared:

Yes - we know about this bug :)

[alexins]

MPC-BE 1.2.1.0.3570 Dev.:

MPC-BE 1.2.1.0.3570 Dev (VS2010 & VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203570/) (sourceforge.net)
MPC-BE 1.2.1.0.3570 Dev (VS2010 & VS2013) (http://dev.mpc-next.ru/index.php/topic,1837.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3569&er=3558&max=40&search=)

[filler56789]

OK, now the HEVC decoder "obeys the user" :) --- BUT... :rolleyes:

HEVC in MP4 => plays, however it's much slower than the Lentoid decoder;

HEVC in MKV (*VfW-mode*) => cannot connect to LAV Splitter;

HEVC in AVI => does not connect to MPC AVI Splitter;

HEVC in ASF => connects to the WM ASF Reader, however the graph freezes (no playback);

HEVC in TS => not tested;

[easyfab]

Since vp9 is now also a native decoder in ffmpeg have you planned to had it ?

[v0lt]

Since vp9 is now also a native decoder in ffmpeg have you planned to had it ?
Share samples. We'll see.

[alexins]

Since vp9 is now also a native decoder in ffmpeg have you planned to had it ?

Yes, we are planning.

[alexins]

MPC-BE 1.2.1.0.3582 Dev.:

MPC-BE 1.2.1.0.3582 Dev (VS2010 & VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203582/) (sourceforge.net)
MPC-BE 1.2.1.0.3582 Dev (VS2010 & VS2013) (http://dev.mpc-next.ru/index.php/topic,1839.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3581&er=3571&max=40&search=)

[bugmen0t]

MPC-BE 1.2.1.0.3582 Dev.:

MPC-BE 1.2.1.0.3582 Dev (VS2010 & VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203582/) (sourceforge.net)
MPC-BE 1.2.1.0.3582 Dev (VS2010 & VS2013) (http://dev.mpc-next.ru/index.php/topic,1839.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3581&er=3571&max=40&search=)
thank you
quick question:are those compiled with vs 2013 RC or final?
and are standalone filters necessary? mpc-hc shows subtitles for most anime (rest play if I instally xy-vsfilter) whereas with mpc-be none work

[z_mashine]

are those compiled with vs 2013 RC or final?

Final.

are standalone filters necessary?

Only when you want to use MPC-BE Filters with other players.

mpc-hc shows subtitles for most anime (rest play if I instally xy-vsfilter) whereas with mpc-be none work

I don't watch anime and I don't know but you can try xy-subfilter also.

[alexins]

quick question:are those compiled with vs 2013 RC or final?

I use Visual Studio 2013 (Final). :)
Show license? ;)

[alexins]

OK, now the HEVC decoder "obeys the user" :) --- BUT... :rolleyes:

HEVC in MP4 => plays, however it's much slower than the Lentoid decoder;

HEVC in MKV (*VfW-mode*) => cannot connect to LAV Splitter;

HEVC in AVI => does not connect to MPC AVI Splitter;

HEVC in ASF => connects to the WM ASF Reader, however the graph freezes (no playback);

HEVC in TS => not tested;

1) HEVC in MP4 => plays, however it's much slower than the Lentoid decoder - Hevc (ffmpeg) decoder has the status of a "Experimental", the work has only just begun.
2) HEVC in MKV (*VfW-mode*) => cannot connect to LAV Splitter - Alas, at the time of your testing LAV Splitter is not supported work with HEVC. (LAV Git: f5a38d93 - Support HEVC demuxing - 2013-10-20 16:15:38; 9bc27703 - Support HEVC decoding - 2013-10-20 16:21:11)
3) HEVC in AVI, HEVC in ASF, HEVC in MKV (*VfW-mode*) - currently not compatible with decoder HEVC (ffmpeg).
4) HEVC in TS - not yet implemented in MpegSplitter, in the future will have that opportunity.

[filler56789]

1) HEVC in MP4 => plays, however it's much slower than the Lentoid decoder - Hevc (ffmpeg) decoder has the status of a "Experimental", the work has only just begun.
2) HEVC in MKV (*VfW-mode*) => cannot connect to LAV Splitter - Alas, at the time of your testing LAV Splitter is not supported work with HEVC. (LAV Git: f5a38d93 - Support HEVC demuxing - 2013-10-20 16:15:38; 9bc27703 - Support HEVC decoding - 2013-10-20 16:21:11)
3) HEVC in AVI, HEVC in ASF, HEVC in MKV (*VfW-mode*) - currently not compatible with decoder HEVC (ffmpeg).
4) HEVC in TS - not yet implemented in MpegSplitter, in the future will have that opportunity.

Thanks for answering :goodpost:

[Aleksoid1978]

Support MPEG-TS + HEVC is done :)

[beter]

thank you
quick question:are those compiled with vs 2013 RC or final?
and are standalone filters necessary? mpc-hc shows subtitles for most anime (rest play if I instally xy-vsfilter) whereas with mpc-be none work

I watch anime, but all subtitles are displayed normally(.ass, .sup, idx+sub, either internal or external.)

[alexins]

MPC-BE 1.2.1.0.3592 Dev.:

MPC-BE 1.2.1.0.3592 Dev (VS2010 & VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203592/) (sourceforge.net)
MPC-BE 1.2.1.0.3592 Dev (VS2010 & VS2013) (http://dev.mpc-next.ru/index.php/topic,1841.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3591&er=3583&max=40&search=)

p.s.
Currently, MPC-BE can decode video HEVC that is placed in containers MKV, MP4, TS.

[arrgh]

...high time you tackle the AVC/MVC 3D-playback issue...don't you think :)
the friends at MPC-HC have this now for 3 years on the agenda without progress...
it really would be nice to have something working, which is also able to playback subs unlike Stereoscopic Player...

[Aleksoid1978]

Add support playback & decoding HEVC in AVI & MKV(*VfW-mode*) :)

[filler56789]

Add support playback & decoding HEVC in AVI & MKV(*VfW-mode*) :)

Great :thanks:

But where is the dev build 3596(or higher)? :)

[alexins]

MPC-BE 1.2.1.0.3603 Dev.:

MPC-BE 1.2.1.0.3603 Dev (VS2010 & VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203603/) (sourceforge.net)
MPC-BE 1.2.1.0.3603 Dev (VS2010 & VS2013) (http://dev.mpc-next.ru/index.php/topic,1843.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3602&er=3593&max=40&search=)

p.s.
Currently, MPC-BE can decode video HEVC that is placed in containers AVI, MKV, MKV(*VfW-mode*), MP4, TS.

[THX-UltraII]

Post deleted

[alexins]

MPC-BE 1.2.1.0.3617 Dev.:

MPC-BE 1.2.1.0.3617 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203617/) (sourceforge.net)
MPC-BE 1.2.1.0.3617 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1845.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3616&er=3604&max=40&search=)

p.s.
Currently, MPC-BE can decode video HEVC that is placed in containers AVI, MKV, MKV(*VfW-mode*), MP4, TS.

[foxyshadis]

Quick question, can you bind the mouse wheel or middle click to an action? It doesn't seem to work when I try it now, when it did in MPC and HC.

[alexins]

MPC-BE 1.2.1.0.3627 Dev.:

MPC-BE 1.2.1.0.3627 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203627/) (sourceforge.net)
MPC-BE 1.2.1.0.3627 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1847.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3626&er=3618&max=40&search=)

[alexins]

MPC-BE 1.2.1.0.3632 Dev.:

MPC-BE 1.2.1.0.3632 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203632/) (sourceforge.net)
MPC-BE 1.2.1.0.3632 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1849.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3631&er=3628&max=40&search=)

[alexins]

MPC-BE 1.2.1.0.3643 Dev.:

MPC-BE 1.2.1.0.3643 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203643/) (sourceforge.net)
MPC-BE 1.2.1.0.3643 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1853.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3642&er=3633&max=40&search=)

[alexins]

MPC-BE 1.2.1.0.3650 Dev.:

MPC-BE 1.2.1.0.3650 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203650/) (sourceforge.net)
MPC-BE 1.2.1.0.3650 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1855.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3649&er=3644&max=40&search=)

[Milardo]

hi, i haven't tested my capture device yet, but does a roxio game capture hd pro work in mpc-be, it is a usb 2.0 hdmi capture device.

[alexins]

MPC-BE 1.2.1.0.3662 Dev.:

MPC-BE 1.2.1.0.3662 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203662/) (sourceforge.net)
MPC-BE 1.2.1.0.3662 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1861.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3661&er=3651&max=40&search=)

[alexins]

MPC-BE 1.2.1.0.3674 Dev.:

MPC-BE 1.2.1.0.3674 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203674/) (sourceforge.net)
MPC-BE 1.2.1.0.3674 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1866.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3671&er=3663&max=40&search=)

[Knocks]

Hey guys. I'm unable to switch audio tracks. When I right-click the video during playback and go to Properties, I can see that there are multiple audio tracks for this MKV file. But when I right-click and select Audio, all I can see is Options... and Load Ext Audio...

Am I missing something? In MPC-HC that's how you selected audio tracks.

[detmek]

Go to Navigate - Audio Language and try there.

[Knocks]

Audio is grayed out in that menu, can't even access the list of tracks

[detmek]

Enable Audio Switcher in Options.

[Knocks]

It's already enabled

[wanezhiling]

Reset in Miscellaneous tab.
If still doesn't work, cut a sample by mkvtoolnix and upload it.

[Aleksoid1978]

Hey guys. I'm unable to switch audio tracks. When I right-click the video during playback and go to Properties, I can see that there are multiple audio tracks for this MKV file. But when I right-click and select Audio, all I can see is Options... and Load Ext Audio...

Am I missing something? In MPC-HC that's how you selected audio tracks.

What version you download ?. give a link.
Maybe you download D-BOX version ??

[Knocks]

Aleks, I was using a build that was 2 months old, don't remember which one. I tried upgrading this morning to test if that would fix the issue, and the current version is D-BOX.

Sourceforge sends you the D-BOX version by default, it doesn't give you a choice of other versions.

[Aleksoid1978]

Aleks, I was using a build that was 2 months old, don't remember which one. I tried upgrading this morning to test if that would fix the issue, and the current version is D-BOX.

Do not use D-BOX version. It's disable AudioSwitcher.

[filler56789]

Sourceforge sends you the D-BOX version by default, it doesn't give you a choice of other versions.

Are you sure of that?

http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20(from%20svn%20trunk)/MPC-BE%20v1.2.1.0%20-dev%20build%203674/

[Knocks]

Do not use D-BOX version. It's disable AudioSwitcher.

I downloaded a stable version from July from the Russian site, and it works fine. Thank you.


Are you sure of that?

http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20(from%20svn%20trunk)/MPC-BE%20v1.2.1.0%20-dev%20build%203674/

I'm sure you can dig for a different version, but look what it says in your link in big fat letters:

Looking for the latest version? Download MPC-BE.1.2.1.0.3674.x64-installer.(VS2013).D-BOX.zip (9.1 MB)

Why point users to a crippled version by default? Look how much time it's wasted just for me alone.

[v0lt]

Please do not use the D-BOX version of the player.

[Aleksoid1978]

I remove D-BOX version :)

[AngelGraves13]

Can you please add a Playlist button next to Audio, Sub? Currently, it's a pain accessing the playlist. Also adding a + symbol to add additional files to the playlist would be awesome.

Can you also please add a Repeat button similar to iTunes where clicking it once repeats the playlist, and twice the current file, and three times turns it off.

http://support.apple.com/kb/PH957 <- An idea of the types of symbols to use.

- Maybe change the Audio, Sub buttons to symbols as well? Keep it consistent.

[arrgh]

...high time you tackle the AVC/MVC 3D-playback issue...don't you think :)


I assume that these patches here (http://www.3dtv.at/OpenSource/MPCPatches.zip)are of no use? sorry I'm no coder...:(

[VipZ]

There is a bit of a bug in the options dialog for file associations when UAC is enabled.

https://dl.dropboxusercontent.com/u/19338638/options%20bug.JPG

When you choose the modify button to elevate a new dialog is shown instead of reusing the existing.

Is this a bug or by design?

Thanks

[alexins]

MPC-BE 1.2.1.0.3682 Dev.:

MPC-BE 1.2.1.0.3682 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203682/) (sourceforge.net)
MPC-BE 1.2.1.0.3682 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1869.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3681&er=3675&max=40&search=)

[Aleksoid1978]

There is a bit of a bug in the options dialog for file associations when UAC is enabled.

https://dl.dropboxusercontent.com/u/19338638/options%20bug.JPG

When you choose the modify button to elevate a new dialog is shown instead of reusing the existing.

Is this a bug or by design?

Thanks

Yes - it's by design.

[alexins]

MPC-BE 1.2.1.0.3694 Dev.:

MPC-BE 1.2.1.0.3694 Dev (VS2013) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203694/) (sourceforge.net)
MPC-BE 1.2.1.0.3694 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1875.0.html) (dev.mpc-next.ru)
MPC-BE 1.2.1.0.3694 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1874.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3693&er=3683&max=40&search=)

[VipZ]

Yes - it's by design.

Thanks for the info

[alexins]

MPC-BE 1.2.1.0.3701 Dev.:

MPC-BE 1.2.1.0.3701 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203701/) (sourceforge.net)
MPC-BE 1.2.1.0.3701 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1880.0.html) (dev.mpc-next.ru)
MPC-BE 1.2.1.0.3701 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1879.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3700&er=3695&max=40&search=)

[filler56789]

Issue between MpegSplitter.ax and the most-recent Lentoid HEVC Decoder: result = black frame(s) only :confused:

Though the Mpeg Splitter works OK with LAV Video...

Also, now the Lentoid filter works correctly with LAV Splitter :cool:

Test file: http://www.mediafire.com/download/w7ja48666zlzmuc/stillpic-with-audio%5BHEVC%2BMP2%5D.ts.zip

[Aleksoid1978]

Issue between MpegSplitter.ax and the most-recent Lentoid HEVC Decoder: result = black frame(s) only :confused:

Though the Mpeg Splitter works OK with LAV Video...

Also, now the Lentoid filter works correctly with LAV Splitter :cool:

Test file: http://www.mediafire.com/download/w7ja48666zlzmuc/stillpic-with-audio%5BHEVC%2BMP2%5D.ts.zip

Work fine with LAV/Internal Video Decoder. That's enough :).

[filler56789]

Work fine with LAV/Internal Video Decoder. That's enough :).

I see, MpegSplitter.ax is obsolete, and very-soon it will be discontinued :D

[Aleksoid1978]

I see, MpegSplitter.ax is obsolete, and very-soon it will be discontinued :D

No - you don't right :)

[filler56789]

^ Assuming you're right, then I will pester the Strongene developers again :)

[Reino]

I have a DXVA1 issue with a probably rare use case.
It concerns the following 2 files:
POW_00678246-audio_eng=192000-video=900000.ts (http://www.degeelebosch.nl/reino/POW_00678246-audio_eng=192000-video=900000.ts)
POW_00678246-audio_eng=128000-video=500000.ts (http://www.degeelebosch.nl/reino/POW_00678246-audio_eng=128000-video=500000.ts)For me - url from playlist is not work. What i can do ??Does the link for the playlist on my website (http://www.degeelebosch.nl/reino/POW_00678246-audio_eng=192000-video=900000.ts) not work for you, or the actual link of the ts-segments (http://l24m6c61b66d1c0052154323000000.2579b4606778978a.adaptive-e10c4a.npostreaming.nl/lmshieldv2/3/bnn/rest/2013/POW_00678246/POW_00678246.ism/POW_00678246-audio_eng%3D192000-video%3D900000-1.ts) in the playlist?

Anyway, I believe there's something wrong with the way you implement ffmpeg in MPC-BE. 'Wrong' in the sense that FFDShow and LAVFilters don't have any issues playing POW_00678246-audio_eng=192000-video=900000.ts through software. Playback is all smooth, like:
http://www.ld-host.de/uploads/thumbnails/fd566a4b07dc59d68c4826ff926bee7f.jpg (http://www.ld-host.de/uploads/images/fd566a4b07dc59d68c4826ff926bee7f.jpg)

MPC-BE's internal decoders "H.264/AVC (DXVA)" AND "H.264/AVC (FFmpeg)" are the only ones where playback is 'jaggy', like:
http://www.ld-host.de/uploads/thumbnails/8d19876a2555067e3a8962b4b1142a32.jpg (http://www.ld-host.de/uploads/images/8d19876a2555067e3a8962b4b1142a32.jpg)

Can you explain this?


And something I noticed today: View -> Information (Ctrl+3) shows "Description" when Comment is present in Tag, but it doesn't show REM COMMENT in cue-sheet. Now you may expect me to request to show cue-sheet comments as well, but I don't how other users feel about it, but I don't care about "Description". I noticed LAV Splitter shows "Description" (if present) too, but I'm only interested in "Title" and "Author" on the Information-tab (Ctrl+3).I support tag only for internal splitter/source. If LAV do not give information about "Title"/"Author" - write author about this.You don't understand, or misread my post. LAV does show "Description" too, just like MPC TAK Source, but I'm not interested in it being shown on the Information-tab. So, unless anyone else thinks differently, I much rather see it being ignored. I don't want to see it on the Information-tab!


Next,... at the moment "PERFORMER" (Artist) is always shown (for WavPack and FLAC as well) in the Navigate-menu as; 01. Artist-1 - Audiotrack_Titel-1. For...
REM GENRE Classical
PERFORMER "Various Artists"
TITLE "Album_name"
FILE "Sample.tak" WAVE
TRACK 01 AUDIO
TITLE "Audiotrack_Title-1"
PERFORMER "Artist-1"
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "Audiotrack_Title-2"
PERFORMER "Artist-2"
INDEX 01 09:13:38
TRACK 03 AUDIO
TITLE "Audiotrack_Title-3"
PERFORMER "Artist-3"
INDEX 01 15:16:38...that's perfectly fine, but for most cases...
REM GENRE Rock
PERFORMER "Artist-X"
TITLE "Album-Y"
FILE "Sample.tak" WAVE
TRACK 01 AUDIO
TITLE "Audiotrack_Title-1"
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "Audiotrack_Title-2"
INDEX 01 01:24:03
TRACK 03 AUDIO
TITLE "Audiotrack_Title-3"
INDEX 01 06:16:73...where there's only 1 artist, I'd say omit "PERFORMER"; 01. Audiotrack_Titel-1.So, if TRACK PERFORMER "" exists, Navigate-menu entry: 01. <PERFORMER> - <TITLE>, else 01. <TITLE>.
Something like that wouldn't be so hard to code for you, right?


Could you enable the Zoom-function (Alt+1-4) for covert-art too, and have it auto-zoom to 100% if that function is enabled in Option->Playback?About Zoom for Cover - do not planned.Can't you create something like this?
http://www.ld-host.de/uploads/thumbnails/d844b6ae9e321262b7e2dd5af9acbc35.png (http://www.ld-host.de/uploads/images/d844b6ae9e321262b7e2dd5af9acbc35.png)



Lately I've seen this "D-Box" being mentioned. I've done some searching but found nothing. What is it?

[beter]

Does the link for the playlist on my website (http://www.degeelebosch.nl/reino/POW_00678246-audio_eng=192000-video=900000.ts) not work for you, or the actual link of the ts-segments (http://l24m6c61b66d1c0052154323000000.2579b4606778978a.adaptive-e10c4a.npostreaming.nl/lmshieldv2/3/bnn/rest/2013/POW_00678246/POW_00678246.ism/POW_00678246-audio_eng%3D192000-video%3D900000-1.ts) in the playlist?


I don't know the situation of the developers.
But at least the actual TS segments are "403 Forbidden" for me, and the playlist file is accessible.

The TV live on the NPO's website is also blocked.
Only two channels (Journaal 24 and Politiek 24, also on the website of NOS) are accessible:)

[alexins]

Media Player Classic - BE 1.3.0.3 Win32 (Stable release):
Media Player Classic - BE 1.3.0.3 x86 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.3.0.3/MPC-BE.1.3.0.3.x86-installer.zip/download)
Media Player Classic - BE 1.3.0.3 x86 (portable) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.3.0.3/MPC-BE.1.3.0.3.x86.7z/download)
Standalone Filters Media Player Classic - BE 1.3.0.3 x86 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.3.0.3/standalone_filters-mpc-be.1.3.0.3.x86.7z/download)

Media Player Classic - BE 1.3.0.3 x64 (Stable release):
Media Player Classic - BE 1.3.0.3 x64 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.3.0.3/MPC-BE.1.3.0.3.x64-installer.zip/download)
Media Player Classic - BE 1.3.0.3. x64 (portable) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.3.0.3/MPC-BE.1.3.0.3.x64.7z/download)
Standalone Filters Media Player Classic - BE 1.3.0.3 x64 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.3.0.3/standalone_filters-mpc-be.1.3.0.3.x64.7z/download)

Source Code:
Media Player Classic - BE 1.3.0.3 Source Code (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Source%20Code/MPC-BE%201.3.0.3%20Source%20Code/MPC-BE%201.3.0.3%20Source%20Code.7z/download)

Full changes in release (http://www.xvidvideo.ru/logi-izmeneniy/changelog-media-player-classic-be-eng.html)

[Reino]

I don't know the situation of the developers.
But at least the actual TS segments are "403 Forbidden" for me, and the playlist file is accessible.Then I guess all the videos are only accessible with a Dutch IP-address. That's why I downloaded and uploaded the 5min news broadcast of 12pm today here (http://www.mediafire.com/download/145v5qq1g70b1h9/Journaal_03112013-1200.7z), so you all can have a look yourself. The first ts-file is the actual playlist which can be opened by MPC-BE.

[beter]

Then I guess all the videos are only accessible with a Dutch IP-address. That's why I downloaded and uploaded the 5min news broadcast of 12pm today here (http://www.mediafire.com/download/145v5qq1g70b1h9/Journaal_03112013-1200.7z), so you all can have a look yourself. The first ts-file is the actual playlist which can be opened by MPC-BE.

For me it is like this:
Smooth in madVR, but video is delayed when using internal decoder, video and audio are synchronised when uising LAV.

Many frames are dropped when using internal decoder with all the other renderers, video is also delayed. With LAV it is normal.

[Aleksoid1978]

I test files from http://www.mediafire.com/download/145v5qq1g70b1h9/Journaal_03112013-1200.7z on Win 7/8 - smooth playback with/without DXVA using internal decoder. Test DXVA 1.0 can't

[Reino]

For Win7/8 that's expected, because I also get smooth playback when I test it on a Win7/8 pc. But I'm on WinXP (still), and I think beter too.
Watching the video online (flash-player) is undoable (cpu @ 100%, and yes, I know I desperately need a new pc :p), so feeding these "ts-playlists" to MPC-BE is the only way to go. With FFDShow and LAV Filters (through software of course) playback is all smooth as you can see, but there seems to be something seriously wrong with the 2 internal H.264 video decoders.
I've made a video recording (http://www.mediafire.com/download/t9ypk1v2y3oasd2/MPC-BE_recording-qhd.mkv), so you can see what's really happening.
If it's not helpfull, isn't there another way (analysis with dump-file?) to see what's going on under the hood?

[beter]

For Win7/8 that's expected, because I also get smooth playback when I test it on a Win7/8 pc. But I'm on WinXP (still), and I think beter too.
Watching the video online (flash-player) is undoable (cpu @ 100%, and yes, I know I desperately need a new pc :p), so feeding these "ts-playlists" to MPC-BE is the only way to go. With FFDShow and LAV Filters (through software of course) playback is all smooth as you can see, but there seems to be something seriously wrong with the 2 internal H.264 video decoders.
I've made a video recording (http://www.mediafire.com/download/t9ypk1v2y3oasd2/MPC-BE_recording-qhd.mkv), so you can see what's really happening.
If it's not helpfull, isn't there another way (analysis with dump-file?) to see what's going on under the hood?
No, I am using Win 7 Home Premium (Aero Glass disabled)

http://i.imgur.com/HfVFlsM.jpg

[z_mashine]

I test files from http://www.mediafire.com/download/145v5qq1g70b1h9/Journaal_03112013-1200.7z on Win 7/8 - smooth playback with/without DXVA using internal decoder.

rigister lav splitter or add it to "external filters" and launch the first file.

[Reino]

@ beter: Although I didn't experience a spotty image on Win7, I'm glad to see someone else experiences the same thing.
You're Dutch and Chinese, btw? ;)

@ z_mashine: I think he already used LAV Splitter Source, because it's the only one that can open the "ts-playlists" afaik. At least none of the internal source filters could open them.

[beter]

@ beter: Although I didn't experience a spotty image on Win7, I'm glad to see someone else experiences the same thing.
You're Dutch and Chinese, btw? ;)


I am sorry to say that I am not a Dutch. (otherwise I can access the live of NPO)
I am now living in Flemish region of Belgium, and still learning Dutch.

[Reino]

You're sorry?! :D That explains your first screenshot anyway.

[Aleksoid1978]

rigister lav splitter or add it to "external filters" and launch the first file.

POW_00556598-audio_eng=192000-video=900000.ts - it's not a MPEG-TS file, it's a .M3U :)

#EXTM3U
#EXT-X-VERSION:1
## Created with Unified Streaming Platform(version=1.4.56)
#EXT-X-MEDIA-SEQUENCE:1
#EXT-X-ALLOW-CACHE:NO
#EXT-X-TARGETDURATION:9
#EXTINF:8, no desc
POW_00556598-audio_eng=192000-video=900000-1.ts
#EXTINF:7, no desc
POW_00556598-audio_eng=192000-video=900000-2.ts
#EXTINF:8, no desc
POW_00556598-audio_eng=192000-video=900000-3.ts
#EXTINF:9, no desc
POW_00556598-audio_eng=192000-video=900000-4.ts
#EXTINF:7, no desc
POW_00556598-audio_eng=192000-video=900000-5.ts
...


And yes - opened with LAV playback as one file with dropped frames. Rename to .m3u - and playback is fine with any source/splitter

[Reino]

I don't see why that's surprising...
These are m3u8-playlists representing a television show on Dutch national television. They list more than 350 dynamic MPEG-TS streams.
I renamed them to *.ts so you can watch the entire show in MPC-BE (and MPC-HC). Otherwise they're treated as ordinary playlists and every 5sec a new segment needs to be loaded.

[Aleksoid1978]

I don't see why that's surprising...

try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe.7z

[Blakeniel]

Congrats to all devs on the new stable release. Thanks and please keep up the awesome work u guys do :thanks:

Media Player Classic - BE 1.3.0.3 Win32 (Stable release):
Media Player Classic - BE 1.3.0.3 x86 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.3.0.3/MPC-BE.1.3.0.3.x86-installer.zip/download)
Media Player Classic - BE 1.3.0.3 x86 (portable) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.3.0.3/MPC-BE.1.3.0.3.x86.7z/download)
Standalone Filters Media Player Classic - BE 1.3.0.3 x86 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.3.0.3/standalone_filters-mpc-be.1.3.0.3.x86.7z/download)

Media Player Classic - BE 1.3.0.3 x64 (Stable release):
Media Player Classic - BE 1.3.0.3 x64 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.3.0.3/MPC-BE.1.3.0.3.x64-installer.zip/download)
Media Player Classic - BE 1.3.0.3. x64 (portable) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.3.0.3/MPC-BE.1.3.0.3.x64.7z/download)
Standalone Filters Media Player Classic - BE 1.3.0.3 x64 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.3.0.3/standalone_filters-mpc-be.1.3.0.3.x64.7z/download)

Source Code:
Media Player Classic - BE 1.3.0.3 Source Code (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Source%20Code/MPC-BE%201.3.0.3%20Source%20Code/MPC-BE%201.3.0.3%20Source%20Code.7z/download)

Full changes in release (http://www.xvidvideo.ru/logi-izmeneniy/changelog-media-player-classic-be-eng.html)

[Reino]

@ Aleksoid1978: Succes! Smooth playback all the way. Thank you!

I don't like to repeat myself, but can you please answer #2,3 and 4 of my initial post?

[fohrums]

[request] have an option to disable autoplay when using streaming sources so video continues to buffer. better yet to add percentile of when to allow player to resume.

[ryrynz]

Could we have a graceful exit if MadVR is set as a preferred external filter yet is not set as the output renderer? Having this ticked crashes the player when you try to play a file with any other renderer.

[Aleksoid1978]

I don't like to repeat myself, but can you please answer #2,3 and 4 of my initial post?

My english is bad and i don't understand what you mean. :)

[Reino]

Я рад и благодарен за ваши исправления, но не могли бы вы поделиться своими мыслями и комментариями по другим вопросам (cue-лист, обложку) моего поста?

[Aleksoid1978]

Я рад и благодарен за ваши исправления, но не могли бы вы поделиться своими мыслями и комментариями по другим вопросам (cue-лист, обложку) моего поста?

I don't understand what about you write in you post :)

[beter]

I don't understand what about you write in you post :)

I think he means

-Information tab (Ctrl+3) doesn't necessary to have "description", as it is always too long and ended with "...", he is also not interested on it, and it is wasting the space of interface, but he wants to show author and title.
So he wants to have an option to set what is shown in the information tab.

-He wants to add an option to lower the default size of cover scan with super high definition.

-He finds a problem of reading cue sheet in navigation menu.
when it is like this, performers will be shown:
REM GENRE Classical
PERFORMER "Various Artists"
TITLE "Album_name"
FILE "Sample.tak" WAVE
TRACK 01 AUDIO
TITLE "Audiotrack_Title-1"
PERFORMER "Artist-1"
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "Audiotrack_Title-2"
PERFORMER "Artist-2"
INDEX 01 09:13:38
TRACK 03 AUDIO
TITLE "Audiotrack_Title-3"
PERFORMER "Artist-3"
INDEX 01 15:16:38

But when it is like this, the only performer will not be shown:
REM GENRE Rock
PERFORMER "Artist-X"
TITLE "Album-Y"
FILE "Sample.tak" WAVE
TRACK 01 AUDIO
TITLE "Audiotrack_Title-1"
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "Audiotrack_Title-2"
INDEX 01 01:24:03
TRACK 03 AUDIO
TITLE "Audiotrack_Title-3"
INDEX 01 06:16:73

-------
btw, the issue with FLAC internal splitter, is there really no solution found? It is quite weird that it crashes only when the non-unicode program language of all system (of all language) is set as any Eastern Asia language.

[alexins]

MPC-BE 1.3.1.0.3730 Dev.:

MPC-BE 1.3.1.0.3730 Dev (VS2013) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203730/) (sourceforge.net)
MPC-BE 1.3.1.0.3730 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1889.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3730 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1888.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3729&er=3709&max=40&search=)

[Reino]

Haha, unbelievable! :p Blame Google Translate for the bad translation.
As beter points out, you only answered the first question in my initial post.
Damn this language barrier!

[Rapsody10]

Hello

I tried to play an h265 file but cpu goes over 90% Im using mpc-be filtetd and ac3 could you advice please

Thanks in advance

[Aleksoid1978]

Hello

I tried to play an h265 file but cpu goes over 90% Im using mpc-be filtetd and ac3 could you advice please

Thanks in advance

H.265 - it's a "hard" format + ffmpeg's decoder do not optimise yet at 100%

[ryrynz]

Hello

I tried to play an h265 file but cpu goes over 90% Im using mpc-be filtetd and ac3 could you advice please

Thanks in advance

My advice would be either avoid h265 or upgrade to a quad core, old tech only goes so far.

[Rapsody10]

Thank you @Aleksoid1978 & ryrynz

Noted and avoided until better laptop/tablet and better ffmpegs

Raps

[alexins]

MPC-BE 1.3.1.0.3737 Dev.:

MPC-BE 1.3.1.0.3737 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203737/) (sourceforge.net)
MPC-BE 1.3.1.0.3737 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1894.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3737 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1893.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3736&er=3731&max=40&search=)

[alexins]

MPC-BE 1.3.1.0.3743 Dev.:

MPC-BE 1.3.1.0.3743 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203743/) (sourceforge.net)
MPC-BE 1.3.1.0.3743 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1899.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3743 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1898.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3742&er=3738&max=40&search=)

[alexins]

MPC-BE 1.3.1.0.3749 Dev.:

MPC-BE 1.3.1.0.3749 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203749/) (sourceforge.net)
MPC-BE 1.3.1.0.3749 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1901.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3749 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1900.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3748&er=3744&max=40&search=)

[Blakeniel]

Hi guys,
Do I need to install C++ Redistributable 2013 (http://www.microsoft.com/en-us/download/details.aspx?id=40784) for the MPC-BE VS2103 versions?

[wanezhiling]

No :)

[alexins]

MPC-BE 1.3.1.0.3765 Dev.:

MPC-BE 1.3.1.0.3765 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203765/) (sourceforge.net)
MPC-BE 1.3.1.0.3765 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1905.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3765 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1904.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3764&er=3750&max=40&search=)

[alexins]

MPC-BE 1.3.1.0.3780 Dev.:

MPC-BE 1.3.1.0.3780 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203780/) (sourceforge.net)
MPC-BE 1.3.1.0.3780 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1913.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3780 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1912.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3779&er=3766&max=40&search=)

[ryrynz]

Could you stop the installer from prompting to register the files every time on Windows 8? MPC-HC doesn't do it.

[fatboyz]

Hi,
Im using mpc-be 1.3.0.3 x86 on windows 7.

I noticed that recently that it was taking 5 seconds to shutdown mpc-be after I press exit.(my screen switches resolutions depending on format)
Even if you pressed file and exit it would take a few seconds.

I found the problem to be the MRU/recent files list.

Mine was REALLY long and as soon as I cleared that the problem went away.

I have now added 'HKCU\Software\MPC-BE\Recent File List' to ccleaner so it doesn't get as long again, without me manually pressing the 'clear list' button.

If it is hanging on exit, the MRU is the problem.

[kerimcem]

ı use mpc-be audio rederer wasapi sometimes does not shut down mpc-be ...
running in the background
http://k1311.hizliresim.com/1h/g/ujm1x.jpg
direct sound no problem,ı use srs sandbox....
winamp aimp jriver no shutdown problem wasapi..

[alexins]

MPC-BE 1.3.1.0.3792 Dev.:

MPC-BE 1.3.1.0.3792 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203792/) (sourceforge.net)
MPC-BE 1.3.1.0.3792 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1922.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3792 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1921.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3791&er=3781&max=40&search=)

[Aleksoid1978]

Could you stop the installer from prompting to register the files every time on Windows 8? MPC-HC doesn't do it.

On Win 8/8.1 - it is necessary, otherwise the extension is not associated with the application.

If you do not want it - disable association in installer.

[Aleksoid1978]

Hi,
Im using mpc-be 1.3.0.3 x86 on windows 7.

I noticed that recently that it was taking 5 seconds to shutdown mpc-be after I press exit.(my screen switches resolutions depending on format)
Even if you pressed file and exit it would take a few seconds.

I found the problem to be the MRU/recent files list.

Mine was REALLY long and as soon as I cleared that the problem went away.

I have now added 'HKCU\Software\MPC-BE\Recent File List' to ccleaner so it doesn't get as long again, without me manually pressing the 'clear list' button.

If it is hanging on exit, the MRU is the problem.

Have not seen this not once, recent file list is always used.
Can show your list ??
Store setting in registry or .ini file ??

[Aleksoid1978]

ı use mpc-be audio rederer wasapi sometimes does not shut down mpc-be ...
running in the background
http://k1311.hizliresim.com/1h/g/ujm1x.jpg
direct sound no problem,ı use srs sandbox....
winamp aimp jriver no shutdown problem wasapi..

Try without madVR.

[detmek]

Feature request/question: Is it posible to add ReplayGain support into player/decoders?
It is useful for audio files and for A/V files as RG tag can be added into container so all files can have same loudness without modifing audio.

[kerimcem]

Try without madVR.
same..
http://r1311.hizliresim.com/1h/h/ukb6d.jpg

[bejita7]

I know it's stupid question but I must know that for sure. When saving screenshot as png you can choose compression level from 1 to 9. If I need lossless png I have to type 1 or 0?

[nevcairiel]

I know it's stupid question but I must know that for sure. When saving screenshot as png you can choose compression level from 1 to 9. If I need lossless png I have to type 1 or 0?

PNG is always lossless.
The compression level just makes your CPU work harder.

[bejita7]

PNG is always lossless.
The compression level just makes your CPU work harder.
Ah, didn't know that, thanks :)

[alexins]

MPC-BE 1.3.1.0.3812 Dev.:

MPC-BE 1.3.1.0.3812 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203812/) (sourceforge.net)
MPC-BE 1.3.1.0.3812 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1933.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3812 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1932.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3811&er=3793&max=40&search=)

[LDD9O]

Will there be any changes to the interface in the future? For example add "On Screen Control", like "Flybar" but an overlay for "Ctrl+1", Ctrl+2" and "Ctrl+5"

[alexins]

MPC-BE 1.3.1.0.3818 Dev.:

MPC-BE 1.3.1.0.3818 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203818/) (sourceforge.net)
MPC-BE 1.3.1.0.3818 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1936.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3818 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1935.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3817&er=3811&max=40&search=)

[alexins]

MPC-BE 1.3.1.0.3828 Dev.:

MPC-BE 1.3.1.0.3828 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203828/) (sourceforge.net)
MPC-BE 1.3.1.0.3828 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1943.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3828 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1942.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3827&er=3819&max=40&search=)

[Kurtnoise]

*nit* it might be great to post the log messages in english instead of russian in the repository... *nit*

[Aleksoid1978]

*nit* it might be great to post the log messages in english instead of russian in the repository... *nit*

My native language - Russian :)

[alexins]

MPC-BE 1.3.1.0.3834 Dev.:

MPC-BE 1.3.1.0.3834 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203834/) (sourceforge.net)
MPC-BE 1.3.1.0.3834 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1948.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3834 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1947.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3833&er=3829&max=40&search=)

*nit* it might be great to post the log messages in english instead of russian in the repository... *nit*
If all developers native language is Russian, what is the meaning to write a foreign language for them?

[ryrynz]

Alexins, just create another link where the page has gone through Google Translate, easy.

[Kurtnoise]

If all developers native language is Russian, what is the meaning to write a foreign language for them?
You post a link with the changes but this is in russian...Sorry, but I don't understand this language. Moreover, english may attract some others developers from other countries.

The ryrynz idea is fine for me.

[alexins]

MPC-BE 1.3.1.0.3851 Dev.:

MPC-BE 1.3.1.0.3851 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203851/) (sourceforge.net)
MPC-BE 1.3.1.0.3851 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1956.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3851 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1955.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3850&er=3835&max=40&search=)

[sheppaul]

You post a link with the changes but this is in russian...Sorry, but I don't understand this language. Moreover, english may attract some others developers from other countries.

The ryrynz idea is fine for me.

If you use chrome, just hit F10 button and chrome will show a translation bar.

[Kurtnoise]

I use Chrome (v 31.0) and F10 does nothing for me...

[sheppaul]

Aaa, sorry about that. It's the chrome extension named "Pig Toolbox".

[turbojet]

Right click > translate to english in chrome. It does a surprisingly good (not great) job in this case.

[G_M_C]

*nit* it might be great to post the log messages in english instead of russian in the repository... *nit*

My native language - Russian :)

MPC-BE 1.3.1.0.3834 Dev.:
[...]

If all developers native language is Russian, what is the meaning to write a foreign language for them?

The fact that your site is mainly in Russian, and the fact you don't have change-logs in English, is keeping me back from switching from MPC HT to MPC-BE. And I know of others having hesitations because of this.

MPC-BE might be better, that is; I have the feeling it might be. But if you cant explain this to the fast majority of people in the world, no-one will start using MPC-BE, let alone backing the project/helping out etc.

[Dark Eiri]

The fact that your site is mainly in Russian, and the fact you don't have change-logs in English, is keeping me back from switching from MPC HT to MPC-BE. And I know of others having hesitations because of this.

MPC-BE might be better, that is; I have the feeling it might be. But if you cant explain this to the fast majority of people in the world, no-one will start using MPC-BE, let alone backing the project/helping out etc.

It is better. Way better and way prettier too.

I don't - and wouldn't really care about the changelog.
I trust these guys are doing the best they can and going the path they feel is the best for the project - they are around since always and I have developed faith in them ;)

Although I DO think it would be great to have a changelog in English too. Or maybe a translation switch. But it definetely wouldn't keep me from using it if not implemented.

[therube]

> changelog in English too. Or maybe a translation switch

http://translate.google.com/... (http://translate.google.com/translate?prev=/language_tools&u=http%3A%2F%2Fsvnlog.mpc-next.ru%2Flog.php%3Frepname%3DMPC-BE%2BTeam%26path%3D%252F%26isdir%3D1%26sr%3D3850%26er%3D3835%26max%3D40%26search%3D)

(And one of the threads in the forums, the RU speaker was not understanding the EN post by a PL speaker :D.)

[alexins]

MPC-BE 1.3.1.0.3872 Dev.:

MPC-BE 1.3.1.0.3872 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203872/) (sourceforge.net)
MPC-BE 1.3.1.0.3872 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1968.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3872 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1967.0.html) (dev.mpc-next.ru)

[Dark Eiri]

> changelog in English too. Or maybe a translation switch

http://translate.google.com/... (http://translate.google.com/translate?prev=/language_tools&u=http%3A%2F%2Fsvnlog.mpc-next.ru%2Flog.php%3Frepname%3DMPC-BE%2BTeam%26path%3D%252F%26isdir%3D1%26sr%3D3850%26er%3D3835%26max%3D40%26search%3D)

(And one of the threads in the forums, the RU speaker was not understanding the EN post by a PL speaker :D.)

Well, that's clever! I don't know why didn't I think of that earlier. Haha- Thank you!
Maybe you guys could put a button for automatic translation to the readers language via Google Translate on the changelog page.

[kasper93]

It is better. Way better and way prettier too.

Which part is better exactly? I would like to know what is important for you :)

Tapatalk 4 @ GT-I9300

[Dark Eiri]

Which part is better exactly? I would like to know what is important for you :)

Tapatalk 4 @ GT-I9300

- Doesn't look like I'm emulating Windows 95, looks natural on modern systems without slowing down or compromising the experience. Actually, it's every little bit as fast, if not faster, than HC.
- Integrates very nicely with Windows 7/8 taskbar play controls and keyboard media keys.
- Doesn't use LAV Filters as a primary filter, still all internal codecs.
- Very useful seekbar features.

I'm not really sure how HC is catching up lately, hasn't used it from months now. I suggest you get BE and see for yourself.

[alexins]

MPC-BE 1.3.1.0.3885 Dev.:

MPC-BE 1.3.1.0.3885 Dev (VS2013) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203885/) (sourceforge.net)
MPC-BE 1.3.1.0.3885 Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1972.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3885 for D-BOX Dev (VS2013) (http://dev.mpc-next.ru/index.php/topic,1971.0.html) (dev.mpc-next.ru)

[Reino]

3 things that come to mind right away:
- DXVA1.
- Parsing Youtube videos.
- (although not finished) support for embedded cue-sheets.

[ryrynz]

looks natural on modern systems

Except for the playlist, I really want someone to tackle it.

[Aleksoid1978]

Which part is better exactly? I would like to know what is important for you :)

Tapatalk 4 @ GT-I9300

I try open .MKV file use LAVSplitter(MPC-BE or MPC-HC), that partially (~12%) downloaded from torrent.
Torrent download is configured to continuously since the beginning of the file(see a screen)
http://i.imgur.com/AvoXB7X.png

Try to seek before 12% of file(when data is exists) :)
P.S. MPC-BE seek is ok.

http://aleksoid.voserver.net/Sample/MKV/Partially/daa-x264fall-1080p.rar

No banter - purely for information
:)

[Keiyakusha]

Which part is better exactly? I would like to know what is important for you :)
In addition to already mentioned things - nice wasapi audio renderer that is not broken and that, unlike other renderers, gives me gapless audio playback of the mkv's with linked segments (unless these changes were ported to MPC-HC, dunno, I stopped using it completely a while ago).

[alexins]

MPC-BE 1.3.1.0.3892 Dev.:

MPC-BE 1.3.1.0.3892 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203892/) (sourceforge.net)
MPC-BE 1.3.1.0.3892 Dev (http://dev.mpc-next.ru/index.php/topic,1982.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3892 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,1981.0.html) (dev.mpc-next.ru)

[kerimcem]

lav+madvr mpc-be darker colors video...:mad:
lav+madvr mpc-hc bright colors video..;)
mpc-hc better..

[Keiyakusha]

lav+madvr mpc-be darker colors video...:mad:
lav+madvr mpc-hc bright colors video..;)
mpc-hc better..

Oh please, take this trolling somewhere else. All the previous posters told about real things that they consider important for them. If you seriously have some problem like that, that's your mistake, not the player's.

[dandic]

A feature request, if I may:

Could you put a button on the controlbar (next to the AUD and SUB buttons) as a shortcut to display the playlist.

Here is why I need it:

Ever since MPC-BE has given us the 'Play with MPC-BE' and 'Add to MPC-BE playlist' shell context menus, it has been very conveniet to use playlists and I'd like to thank the team for that. I use them quite often.

But, when you want to play, say, the 3rd one the playlist, it gets quite laborious to get to the playlist and select the desired item --especially in fullscreen mode.

A button captioned, say, 'LST' to toggle the playlist would be a very useful time saver.

[Dark Eiri]

Oh please, take this trolling somewhere else. All the previous posters told about real things that they consider important for them. If you seriously have some problem like that, that's your mistake, not the player's.

I'm certain he misconfigured something. He shouldn't blame the player, it's his fault. Haha-

[alexins]

MPC-BE 1.3.1.0.3914 Dev.:

MPC-BE 1.3.1.0.3914 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203914/) (sourceforge.net)
MPC-BE 1.3.1.0.3914 Dev (http://dev.mpc-next.ru/index.php/topic,1988.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3914 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,1987.0.html) (dev.mpc-next.ru)

[realghostvids]

Is there a way to access a crash log or something similar in MPC-BE? I started using it yesterday (along with MadVR and LAV filters) and it was really good and smooth but today it crashes when trying to open MKV and MP4 files.

Edit: Wait, now it's fine again. Looks like it was only crashing when I tried to play a video while VidCoder was encoding in the background. That never happened with MPC-HC before.

Edit 2: Back to crashing once again. Yep, I don't really understand what's going on, the crashing seems completely random.

[alexins]

MPC-BE 1.3.1.0.3931 Dev.:

MPC-BE 1.3.1.0.3931 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203931/) (sourceforge.net)
MPC-BE 1.3.1.0.3931 Dev (http://dev.mpc-next.ru/index.php/topic,2001.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3931 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2000.0.html) (dev.mpc-next.ru)

[Ribtin]

Hello

Can anyone tell me why this film looks so much better in VLC than MPC-BE?
http://screenshotcomparison.com/comparison/51886/

[JEEB]

Hello

Can anyone tell me why this film looks so much better in VLC than MPC-BE?
http://screenshotcomparison.com/comparison/51886/
I can't be fully sure, but in most cases differences like this stem from the GPU drivers poking around the standard MS video surfaces, which are used in many video renderers in DirectShow.

Go to your GPU's control panel and disable everything video related (noise reduction, color correction etc.), except for deinterlacing-related things. Then check the result once more.

Also, do note which renderer you are using (Play→Filters lists all the filters used in the graph) and on which OS you are on.

[alexins]

MPC-BE 1.3.1.0.3987 Dev.:

MPC-BE 1.3.1.0.3987 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%203987/) (sourceforge.net)
MPC-BE 1.3.1.0.3987 Dev (http://dev.mpc-next.ru/index.php/topic,2013.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.3987 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2012.0.html) (dev.mpc-next.ru)

[namaiki]

Awesome work with the MPC Audio Renderer. Thanks! (MPC-BE 1.3.0.3)

[kerimcem]

Thanks for updating..

[alexins]

MPC-BE 1.3.1.0.4009 Dev.:

MPC-BE 1.3.1.0.4009 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204009/) (sourceforge.net)
MPC-BE 1.3.1.0.4009 Dev (http://dev.mpc-next.ru/index.php/topic,2019.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4009 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2018.0.html) (dev.mpc-next.ru)

[wiak]

the docked playlist needs a little modernizing love, does not realy *fit* into the new mpc-be gui design

[ryrynz]

Yeah, but nobody working on BE it seems knows how to change anything in that area.

[somespirit]

I use standalone filters with WMP 12 and have problem when there is subtitles with video (movie), the problem is i can't seek, if i make seek WMP 12 is crashing every time and closing (when vsfilter.dll is not used there is no problem with seeking)

the problem is in (i think) - MPCVideoDec.ax

if i use "MPCVideoDec.ax" from standalone_filters-mpc-be.1.3.1.0.3780.x86.(VS2013) - there is no problem with seeking when have subs, this is last working version of filters, all above (incl. 4009) is not working or gives errors when seeking in WMP 12

it is on Win 7 x64, WMP 12 (x86)

i use Haali splitter + MPCVideoDec (decoder for x264) + vsfilter.dll (for subs) --> WMP 12

video is mkv file with x264

[kopija]

Greetings,
is there any way to switch between audio outputs during playback with "dual output" option enabled?
Thanks!

[Aleksoid1978]

I use standalone filters with WMP 12 and have problem when there is subtitles with video (movie), the problem is i can't seek, if i make seek WMP 12 is crashing every time and closing (when vsfilter.dll is not used there is no problem with seeking)

the problem is in (i think) - MPCVideoDec.ax

if i use "MPCVideoDec.ax" from standalone_filters-mpc-be.1.3.1.0.3780.x86.(VS2013) - there is no problem with seeking when have subs, this is last working version of filters, all above (incl. 4009) is not working or gives errors when seeking in WMP 12

it is on Win 7 x64, WMP 12 (x86)

i use Haali splitter + MPCVideoDec (decoder for x264) + vsfilter.dll (for subs) --> WMP 12

video is mkv file with x264

Yes. I fix it.

[wanezhiling]

http://url.cn/M9UnVu
Can't show pgs

[Aleksoid1978]

http://url.cn/M9UnVu
Can't show pgs

Bad muxed file - subtitle's packet have no duration.

[v0lt]

MPC-BE v1.3.1.0 -dev build 4038 (http://dev.mpc-next.ru/index.php/topic,2021.msg12123.html#msg12123)

[kerimcem]

MPC-BE v1.3.1.0 -dev build 4038 (http://dev.mpc-next.ru/index.php/topic,2021.msg12123.html#msg12123)
:thanks:

[mood]

build 4055 and 4066 with the internal splitter, audio volume is very low

with other matroska splitters, audio volume is normal

I confirm what the wanezhiling say in DEV.MPC-NEXT.RU forum.

I have low volume too with internal splitter

[Aleksoid1978]

build 4055 and 4066 with the internal splitter, audio volume is very low

with other matroska splitters, audio volume is normal

I confirm what the wanezhiling say in DEV.MPC-NEXT.RU forum.

I have low volume too with internal splitter

Some bug in Audio Switcher. Disable or remove 2 last audio track - and volume is ok. We try to understand what wrong.

[alexins]

MPC-BE 1.3.1.0.4088 Dev.:

MPC-BE 1.3.1.0.4088 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204088/) (sourceforge.net)
MPC-BE 1.3.1.0.4088 Dev (http://dev.mpc-next.ru/index.php/topic,2043.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4088 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2042.0.html) (dev.mpc-next.ru)

[somespirit]

again i have problem with combination (standalone filters) MPCVideoDec + vsfilter -->WMP 12 , no video at all (only audio), it is with 4080 and 4088, 4066 is working ......(file is h.264 mkv)

[alexins]

MPC-BE 1.3.1.0.4095 Dev.:

MPC-BE 1.3.1.0.4095 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204095/) (sourceforge.net)
MPC-BE 1.3.1.0.4095 Dev (http://dev.mpc-next.ru/index.php/topic,2046.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4095 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2045.0.html) (dev.mpc-next.ru)

[Aleksoid1978]

again i have problem with combination (standalone filters) MPCVideoDec + vsfilter -->WMP 12 , no video at all (only audio), it is with 4080 and 4088, 4066 is working ......(file is h.264 mkv)

Test with latest SVN version - all ok.
Tested in WMP + MPCVideoDec + vsfilter.
Win 8.1

[alexins]

MPC-BE 1.3.1.0.4113 Dev.:

MPC-BE 1.3.1.0.4113 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204113/) (sourceforge.net)
MPC-BE 1.3.1.0.4113 Dev (http://dev.mpc-next.ru/index.php/topic,2054.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4113 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2053.0.html) (dev.mpc-next.ru)

[somespirit]

Test with latest SVN version - all ok.
Tested in WMP + MPCVideoDec + vsfilter.
Win 8.1

now is ok

[alexins]

MPC-BE 1.3.1.0.4134 Dev.:

MPC-BE 1.3.1.0.4134 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204134/) (sourceforge.net)
MPC-BE 1.3.1.0.4134 Dev (http://dev.mpc-next.ru/index.php/topic,2065.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4134 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2064.0.html) (dev.mpc-next.ru)

[Sylt]

Hello, can you add Support for Voxware Metasound (https://github.com/Nevcairiel/LAVFilters/commit/232bc049cb775fb9f98b88afaeeba6250122e9da)?

Sample File (http://www.landeck-tirol.com/feuerwehr/media/video/2004_brand-pfunds.asf)

Thank you.

[rock]

Maybe it's a common question. Will you add linking segment support for mkv in near future? thanks :)

[alexins]

MPC-BE 1.3.1.0.4146 Dev.:

MPC-BE 1.3.1.0.4146 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204146/) (sourceforge.net)
MPC-BE 1.3.1.0.4146 Dev (http://dev.mpc-next.ru/index.php/topic,2071.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4146 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2070.0.html) (dev.mpc-next.ru)

[arrgh]

MPC-BE lost the ability to transcode on the fly AAC 5.1 audio to AC3 ...

[z_mashine]

MPC-BE lost the ability to transcode on the fly AAC 5.1 audio to AC3 ...

Did you mean option in "Audio decoder configuration"?

[arrgh]

Did you mean option in "Audio decoder configuration"?

MPC is not anymore able do transcode an AAC 5.1 audio stream (e.g. from a mkv) to an AC3 and stream it to a SPDIF...it even hangs or gives only stereo or no sound at all, depending on the details of the setup (Win7x86; MPC with internal filters)...tried MPC Audio Renderer, Direct Sound,...

[Aleksoid1978]

MPC is not anymore able do transcode an AAC 5.1 audio stream (e.g. from a mkv) to an AC3 and stream it to a SPDIF...it even hangs or gives only stereo or no sound at all, depending on the details of the setup (Win7x86; MPC with internal filters)...tried MPC Audio Renderer, Direct Sound,...

I think i know what happened. Fix at morning :)

[alexins]

MPC-BE 1.3.1.0.4155 Dev.:

MPC-BE 1.3.1.0.4155 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204155/) (sourceforge.net)
MPC-BE 1.3.1.0.4155 Dev (http://dev.mpc-next.ru/index.php/topic,2078.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4155 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2077.0.html) (dev.mpc-next.ru)

[arrgh]

MPC-BE 1.3.1.0.4155
AAC transcode works again, thanks!

[Lord Maius]

Hi! I would like to know if it is possible to remove "Play with MPC-BE & Add to MPC-BE Playlist" voices from Windows Context Menu.
Happy 2014!

[z_mashine]

Hi! I would like to know if it is possible to remove "Play with MPC-BE & Add to MPC-BE Playlist" voices from Windows Context Menu.
Happy 2014!

uncheck this:

http://i.imgur.com/GQNapsk.jpg (http://i.imgur.com/h0EKMft.png)

[Lord Maius]

Updated italian translation (rev.4122)
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt
Happy 2014

[Lord Maius]

uncheck this:

http://i.imgur.com/GQNapsk.jpg (http://i.imgur.com/h0EKMft.png)

Done but it doesn't work.
Thank you for your help

[alexins]

MPC-BE 1.3.1.0.4161 Dev.:

MPC-BE 1.3.1.0.4161 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204161/) (sourceforge.net)
MPC-BE 1.3.1.0.4161 Dev (http://dev.mpc-next.ru/index.php/topic,2081.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4161 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2080.0.html) (dev.mpc-next.ru)

[z_mashine]

Done but it doesn't work.

reinstall mpc-be with settings reset and unchecked shellext. or try "regsvr32 /u mpcbeshellext.dll" from installation folder.

[Lord Maius]

reinstall mpc-be with settings reset and unchecked shellext. or try "regsvr32 /u mpcbeshellext.dll" from installation folder.
Perfect! Thank you

[alexins]

MPC-BE 1.3.1.0.4166 Dev.:

MPC-BE 1.3.1.0.4166 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.0%20-dev%20build%204166/) (sourceforge.net)
MPC-BE 1.3.1.0.4166 Dev (http://dev.mpc-next.ru/index.php/topic,2084.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.0.4166 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2083.0.html) (dev.mpc-next.ru)

[suanm]

why not build a Media Player Classic - BE for Android?

[v0lt]

why not build a Media Player Classic - BE for Android?
Stupid question. Because ATL, MFC, DirectShow, Direct3D, ...

[Lord Maius]

Stupid question. Because ATL, MFC, DirectShow, Direct3D, ...

And for Windows 8/8.1 Store? Is it possible?

[v0lt]

And for Windows 8/8.1 Store?
We do not deal with this nonsense.

[Lord Maius]

We do not deal with this nonsense.

Why do you call it "nonsense"? It can't technically be done or what?

[ryrynz]

They have zero desire to address this area. No point in asking I think, it would be quite the effort.

[v0lt]

Why do you call it "nonsense"? It can't technically be done or what?
There are two official places where you can download MPC-BE. Why another one?

[iwod]

How do I change the placement of .idx subtitle? I try using the options but it seems they are application to .sub or .SRT format.

[Aleksoid1978]

How do I change the placement of .idx subtitle? I try using the options but it seems they are application to .sub or .SRT format.

Yes - placement options use only for text subtitles.

[Aleksoid1978]

http://url.cn/M9UnVu
Can't show pgs

Fixed.

[IanD]

Is there a way to play DVD with full menu highlighting and activation?

I'm currently using LAV filters and MPC BE, but can't navigate DVD menus, regardless of which settings I use in each. A Google search did not find a solution.

[v0lt]

Is there a way to play DVD with full menu highlighting and activation?
File->Quick open file...-><dvd_path>\VIDEO_TS\VIDEO_TS.IFO
File->Open DVD/Blu-ray...-><dvd_path>
File->Open DVD/Blu-ray...-><dvd_path>\VIDEO_TS
File->Open Disc-><dvd_disc>

[turbojet]

Is it possible to add a delay to the second audio renderer?

The two I'm trying to use, hdmi and speaker out, are 20-30 ms out of sync which makes for a slight echo.

[wanezhiling]

http://url.cn/O3lGH3
Can't load the subtitle, PotPlayer is fine.

[Aleksoid1978]

http://url.cn/O3lGH3
Can't load the subtitle, PotPlayer is fine.

SVN version - load fine.
About Faster subtitles renderer - see tomorrow.

[v0lt]

MPC-BE v1.3.1.0 -dev build 4235 (http://dev.mpc-next.ru/index.php/topic,2100.msg13032.html#msg13032)

[mood]

MPC-BE v1.3.1.0 -dev build 4235 (http://dev.mpc-next.ru/index.php/topic,2100.msg13032.html#msg13032)

mediainfo is update to 0.7.67 in this version?

[v0lt]

mediainfo is update to 0.7.67 in this version?
No.
r4191. Update: MediaInfo 0.7.66+ svn rev.6056.
See also Changelog.txt

[VipZ]

Hi

For about 2-3 weeks or so I have not been able to compile the x86 build of MPC-BE. I use VS2013 and have tried updating to the latest Mingw from http://dev.mpc-next.ru/index.php/topic,1828.0.html, I have also tried a fresh checkout. Compiling the x64 build works fine.

Get the following errors,
8> ../../../bin13/lib/Release_Win32/ffmpeg.lib
8> ar: ../../../bin13/obj/Release_Win32/ffmpeg/libavfilter\af_atempo.o: No such file or directory
8> make.exe: *** [../../../bin13/lib/Release_Win32/ffmpeg.lib] Error 1
8> The system cannot find the file specified.

Error 1 error LNK1181: cannot open input file 'D:\Files\Source\MPC-BE\bin13\lib\Release_Win32\ffmpeg.lib' D:\Files\Source\MPC-BE\src\apps\mplayerc\LINK mpc-be

The af_atempo.o file does exist as indicated above but wandering if it should not be /af_atempo.o as the path vs \af_atempo.o indicated above?

Thanks

[Aleksoid1978]

Hi

For about 2-3 weeks or so I have not been able to compile the x86 build of MPC-BE. I use VS2013 and have tried updating to the latest Mingw from http://dev.mpc-next.ru/index.php/topic,1828.0.html, I have also tried a fresh checkout. Compiling the x64 build works fine.

Get the following errors,
8> ../../../bin13/lib/Release_Win32/ffmpeg.lib
8> ar: ../../../bin13/obj/Release_Win32/ffmpeg/libavfilter\af_atempo.o: No such file or directory
8> make.exe: *** [../../../bin13/lib/Release_Win32/ffmpeg.lib] Error 1
8> The system cannot find the file specified.

Error 1 error LNK1181: cannot open input file 'D:\Files\Source\MPC-BE\bin13\lib\Release_Win32\ffmpeg.lib' D:\Files\Source\MPC-BE\src\apps\mplayerc\LINK mpc-be

The af_atempo.o file does exist as indicated above but wandering if it should not be /af_atempo.o as the path vs \af_atempo.o indicated above?

Thanks

Try rev. 4255

[VipZ]

Try rev. 4255

Thanks, all good now :)

[mood]

No.
r4191. Update: MediaInfo 0.7.66+ svn rev.6056.
See also Changelog.txt

Ok, thanks ;)

Try rev. 4255

where I can find it?

[VipZ]

Hi,

I had been meaning to ask this before, what is the Priority options page for as they all just default and nothing else to set.

Thanks

[Aleksoid1978]

Hi,

I had been meaning to ask this before, what is the Priority options page for as they all just default and nothing else to set.

Thanks

Set default and do not touch :)

[turbojet]

Is it possible to add an option that sets a delay for second audio renderer?

[Aleksoid1978]

Is it possible to add an option that sets a delay for second audio renderer?

Maybe :)

[turbojet]

Would be great if possible, hdmi and speaker out are just a little out of sync for me.

[Mercury_22]

Subresync doesn't work anymore = no sub loaded in subresync (at least in 4267) !

[Aleksoid1978]

Subresync doesn't work anymore = no sub loaded in subresync (at least in 4267) !

Yes - disable at default to improve external subtitle load speed.
http://i017.radikal.ru/1401/54/7f8b6b1699bft.jpg (http://radikal.ru/fp/60d1b99e46c940d3acc923f3fb8700c3)

[Mercury_22]

Yes - disable at default to improve external subtitle load speed.
http://i017.radikal.ru/1401/54/7f8b6b1699bft.jpg (http://radikal.ru/fp/60d1b99e46c940d3acc923f3fb8700c3)

Ok thanks I didn't see that NEW setting. :)
Since the SVN log it's (only) in Russian can you please "announce" this NEW settings / BIG changes more "visible" = here or in English on the SVN log (again, ONLY new / big changes which need user attention ) :thanks:

[VipZ]

Set default and do not touch :)

Lol ok :)

[steelman1991]

Is there a problem with the MpcAudioRenderer mpc-be standalone filter included in the current stand alone filter pack (Standalone Filters MPC-BE 1.0.3.0 x86).

I, purely as a tester, along with ccrocker (madVR player dev on the MeediOS project) have been trying to introduce the filter as an alternative option to ReClock for WASAPI playback. Although the filter can be registered correctly and added to the graph, playback continually falls to the Windows Audio config and we get a 5.1 in, 2.0 out scenario.

Is the standalone filter broken?

[namaiki]

How exactly are you trying to use it? Some more details might help.

[steelman1991]

How exactly are you trying to use it? Some more details might help.
As part of the MeediOS project ccrocker has developed a plug-in, which enables Meedios to use madVR as an alternative player - obviously giving users the option of using madVR as an internal player in conjunction with LAV filters and xy-sub filters, rather than the built in playback engine - presumably evr based, though I can't say for certain.

What he has done is add support to this player to offer MpcAudioRenderer as an option to either the default, or Reclock renderers, thereby giving WASAPI (which I believe the renderer as part of the standalone filters provided) access without the need to have reclock installed.

As I understand it, with the filter correctly registered, the plugin will build the graph discretely, telling Directshow where and how to put the various filters rather than letting directshow decide and possibly insert other filters that may have higher preferences.

However having registered and chosen the MpcAudioRenderer as preferred renderer, despite a multi-channel source, the output (where Windows Sounds are set to stereo), provides only a stereo stream. With WASAPI correctly active I would expect it to bypass that setting and produce identical output to input (Yes/No?).

Unless this is adequate to get some help or advice, what I will do is ask the dev to chime in with a few more specifics and see how we go from there.

Thanks again

[alquimio_125]

I think it does not work the option '' Keep Aspect Ratio''.
Whether or not this selected, the video does not change.
Kmplayer with ''Keep Aspect Ratio'': http://i.minus.com/ibh6FJFiMImatl.png
Without ''Keep Aspect Ratio'':http://i.minus.com/iUgokqknvcYTP.png
Instead though I check or uncheck the image always looks like this (with black borders): http://i.minus.com/i1W8JIOrUWf8B.png

Anyone else have this problem? I also same thing happens in MPC-HC.
Sorry for my bad English.

[Aleksoid1978]

I think it does not work the option '' Keep Aspect Ratio''.
Whether or not this selected, the video does not change.
Kmplayer with ''Keep Aspect Ratio'': http://i.minus.com/ibh6FJFiMImatl.png
Without ''Keep Aspect Ratio'':http://i.minus.com/iUgokqknvcYTP.png
Instead though I check or uncheck the image always looks like this (with black borders): http://i.minus.com/i1W8JIOrUWf8B.png

Anyone else have this problem? I also same thing happens in MPC-HC.
Sorry for my bad English.

http://i.imgur.com/V2jUG9V.png

[alquimio_125]

Aleksoid1978, Might you spend to me this video that you show to try if it works? Because I'm still not convinced

[the_weirdo]

@alquimio_125

Try View -> Video Frame -> Stretch to Window.

EDIT: And yes, Keep Aspect Ratio doesn't seem to have effect.

[beter]

Aleksoid1978, Might you spend to me this video that you show to try if it works? Because I'm still not convinced

Try Options->Internal Filters-> Video Decoders -> Video Decoder configuration -> Read AR from stream

Change it to undetermined (Square box) if it isn't.

[Lord Maius]

Ita txt language file updated rev 4257
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt

[beter]

Ita txt language file updated rev 4257
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt

Reminder:
Please change Statico in
BEGIN DIALOGEX IDD_FILEPROPRES LINES 10
7 "Statico"

back to "static"

It shouldn't be translated, and it causes a bug if it is edited.

[Lord Maius]

Reminder:
Please change Statico in
BEGIN DIALOGEX IDD_FILEPROPRES LINES 10
7 "Statico"

back to "static"

It shouldn't be translated, and it causes a bug if it is edited.

Done :)

https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt

[steelman1991]

As part of the MeediOS project ccrocker has developed a plug-in, which enables Meedios to use madVR as an alternative player - obviously giving users the option of using madVR as an internal player in conjunction with LAV filters and xy-sub filters, rather than the built in playback engine - presumably evr based, though I can't say for certain.

What he has done is add support to this player to offer MpcAudioRenderer as an option to either the default, or Reclock renderers, thereby giving WASAPI (which I believe the renderer as part of the standalone filters provided) access without the need to have reclock installed.

As I understand it, with the filter correctly registered, the plugin will build the graph discretely, telling Directshow where and how to put the various filters rather than letting directshow decide and possibly insert other filters that may have higher preferences.

However having registered and chosen the MpcAudioRenderer as preferred renderer, despite a multi-channel source, the output (where Windows Sounds are set to stereo), provides only a stereo stream. With WASAPI correctly active I would expect it to bypass that setting and produce identical output to input (Yes/No?).

Unless this is adequate to get some help or advice, what I will do is ask the dev to chime in with a few more specifics and see how we go from there.

Thanks again

No-one - even a clarification that there might be an issue with the stand-alone filter?

[alquimio_125]

Try Options->Internal Filters-> Video Decoders -> Video Decoder configuration -> Read AR from stream

Change it to undetermined (Square box) if it isn't.
No, It still does not work. Does it you work to you?
I mean to ''Keep Aspect Ratio''.

[VipZ]

I see there has been a fair bit of changes within mpciconlib.cpp,

Just a suggestion, as with video and audio this code is used,
if (_tcsicmp(ext, _T(":video")) == 0) {
iconindex = IDI_DEFAULT_VIDEO_ICON;
} else if (_tcsicmp(ext, _T(":audio")) == 0) {
iconindex = IDI_DEFAULT_AUDIO_ICON;

Would it not make sense to do the same for playlists for example replace this,
else if (_tcsicmp(ext, _T(".asx")) == 0
|| _tcsicmp(ext, _T(".m3u")) == 0
|| _tcsicmp(ext, _T(".m3u8")) == 0
|| _tcsicmp(ext, _T(".mpcpl")) == 0
|| _tcsicmp(ext, _T(".pls")) == 0
|| _tcsicmp(ext, _T(".wax")) == 0
|| _tcsicmp(ext, _T(".wmx")) == 0
|| _tcsicmp(ext, _T(".wvx")) == 0
|| _tcsicmp(ext, _T(".xspf")) == 0
|| _tcsicmp(ext, _T(".cue")) == 0) {
iconindex = IDI_PLAYLIST_ICON;
}
with this and the code required to make this function,
} else if (_tcsicmp(ext, _T(":playlist")) == 0) {
iconindex = IDI_PLAYLIST_ICON;

Thanks

[v0lt]

@VipZ
It is possible, but we need to change the code of the player.

[beter]

No, It still does not work. Does it you work to you?
I mean to ''Keep Aspect Ratio''.

It works. (except in madVR, both MPC-HC and MPC-BE)

[VipZ]

@VipZ
It is possible, but we need to change the code of the player.

Thanks, yep didn't expect it to be a quick fix. I already had tried to add that code and didn't work :)

[rock]

problem with dxva
cut from sample http://www.putlocker.com/file/B30C126C325E175C
screenshots http://imgur.com/FhEgcUC,DjE5c1Q
fine with ffmpeg and lav with dxva

thanks :)

[v0lt]

problem with dxva
cut from sample http://www.putlocker.com/file/B30C126C325E175C
screenshots http://imgur.com/FhEgcUC,DjE5c1Q
fine with ffmpeg and lav with dxva

thanks :)
Nvidia GT 440 - normal
Intel HD 4000 - normal
What is your graphics card and OS?

[rock]

@v0lt
sorry, I forgot to mention my specs
my graphics card is Intel HD 3000, OS is Windows 8.1

[wanezhiling]

I can confirm.

http://i1.tietuku.com/bpqvcclov.jpg
Win7 x64, Sandy Bridge i5-2520m with integrated HD Graphics 3000
Latest 3347 driver from Intel site: https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23377&lang=eng

MPC-BE DXVA: http://i1.tietuku.com/qqby3hfbe.jpg
MPC-HC (LAV DXVA): http://i1.tietuku.com/bkw1x0axz.jpg

[Aleksoid1978]

Yes - internal DXVA decoder have some trouble with Intel HD, because i don't have this hardware for test.

[Aleksoid1978]

i use WMP 12 + mpcvideo.ax + vsfilter.dll and have green bars on top and bottom when i play video with subtitles, this is with build 4235 and above .....

vsfilter is set to Extend picture to 16:9

video sample: http://www.sendspace.com/file/k38uqh

Thanks. Fixed at 4328.

[IanD]

File->Quick open file...-><dvd_path>\VIDEO_TS\VIDEO_TS.IFO
File->Open DVD/Blu-ray...-><dvd_path>
File->Open DVD/Blu-ray...-><dvd_path>\VIDEO_TS
File->Open Disc-><dvd_disc>

No, I know how to open a DVD. My problem is that when I do open a DVD, the menu plays but I can't navigate the menu screen with mouse or keyboard and the menu items never highlight.

I think this might be to do with accelerated decoding or enabling/disabling the DVD Navigator, so possibly it could be an LAV filter issue, but I would like to know for sure.

[filler56789]

No, I know how to open a DVD. My problem is that when I do open a DVD, the menu plays but I can't navigate the menu screen with mouse or keyboard and the menu items never highlight.

I think this might be to do with accelerated decoding or enabling/disabling the DVD Navigator, so possibly it could be an LAV filter issue, but I would like to know for sure.

Try changing the video renderer. At least EVR is not good for DVD-menus.

[IanD]

Try changing the video renderer. At least EVR is not good for DVD-menus.

How did we get to the point that a renderer needs to be changed to play older material?

Seriously, I expect this is going to impact Bluray playback too.

[Snappy Phoenix]

I always use madVR as my Renderer

by the way, when will an official update of MPC-BE come out it's been a while since the latest official version: MPC-BE Win32 1.3.0.3 // 2013-11-03

[ryrynz]

Honestly, every build is basically a release version, just grab one of the nightlies. As far as releases go though, yeah you guys should have some sort of schedule..

[v0lt]

I always use madVR as my Renderer
madVR v0.87 is very buggy. v0.87.3 is much better.

[Thingol]

Yes - internal DXVA decoder have some trouble with Intel HD, because i don't have this hardware for test.
I think the problem occurs when the vidoe file has more than 9 reference frames. Could be hardware limitation, but there is no problem with LAV's DXVA.

[XMonarchY]

Would it be of any benefit to me if I were to use this player over MPC-HC, given the following considerations:

- I download K-Lite Codec Packs since they have everything configured properly for you
- I overwrite K-Lite Codec Pack MPC-HC files using the latest MPC-HC x86 because I use ReClock, which only works with x86, but K-Lite Pack installs x64 on my Win8.1 x64 system
- I use ReClock with WASAPI, madVR renderer and 3DLUTs, LAV Audio and Video with CUVID enabled and I disable all other external or internal filters

Would there be any improvement in playback performance or quality? My guess is no because madVR and LAV are the ones responsible for that...

I am trying to figure out the main differences between this player and MPC-HC. From one perspective it looks like MPC-BE has a huge number of fixes - are they actually fixes of MPC-HC or just changes/improvements? I ask because I never had any issues with MPC-HC and all the improvements of MPC-BE are not listed as Known Bugs of MPC-HC... I am sure MPC-HC vs MPC-BE is over-discussed, so I just wonder whether each is designed for a specific type of audience?

Would it work if I were to overwrite my MPC-HC folder with MPC-BE files and use it instead? Would I have to re-configure all the filters and codecs or would they be loaded from MPC-HC? I always find it very confusing setting up filters and decoders. There are SO many guides and each suggest its own way of assigning merit and which ones you "prefer" while I have a single preference - LAV Audio, Video, Splitter, madVR. Do not care for subtitles. That is why I settle for K-Lite Codec Pack as it has everything pre-set. But maybe using this player it would be easier or "cleaner" to set up my player, filters, settings, etc.

[djfred93]

MPC-BE crash when you search for DVB-T channel with the latest build. Works with MPC-HC.

[Aleksoid1978]

MPC-BE crash when you search for DVB-T channel with the latest build. Works with MPC-HC.

Developers don't have DVB tuner and can't help you, sorry.

[THX-UltraII]

Alek,

Is it possible to make a updated D-Box version?

[v0lt]

MPC-BE v1.3.1.0 -dev build 4360 (http://dev.mpc-next.ru/index.php/topic,2140.msg13345.html#msg13345)

[bugmen0t]

hi,
yesterday, i press randomly shortkey(s)
and now there's no more preview on seekbar although i checked all checklist on interface option.

any suggestions?
thanks

[Reino]

4306 aleksoid /trunk/ Change: Added support for opening .CUEI only just noticed it today when I downloaded r4360. I just wanna say; Thank you!, because this means, whether a DirectShow filter supports embedded cue-sheets or not, with a separate cue-file you can still use the filter to navigate cue-entries. Thanks!

[rack04]

Does MPC-BE work with SiliconDust HDHomeRun tv tuners?

[filler56789]

MPC-BE v1.3.1.0 -dev build 4360 (http://dev.mpc-next.ru/index.php/topic,2140.msg13345.html#msg13345)

Thanks :thanks:

BUT... the download page @ Sourceforge
was last updated on 2013/12/31 :confused:

[v0lt]

yesterday, i press randomly shortkey(s)
and now there's no more preview on seekbar although i checked all checklist on interface option.
View->Options...->Interface->Use preview in the search

Does MPC-BE work with SiliconDust HDHomeRun tv tuners?
We do not have available these TV-tuners. Better to ask the owners.

BUT... the download page @ Sourceforge
was last updated on 2013/12/31
Some time the builds of MPC-BE will be available only on http://dev.mpc-next.ru/ .

[turbojet]

rack04: nope, only vlc and jrmc for now.

[Aleksoid1978]

Hello all.
Please test internal H.264 DXVA decoder, especially seeking.
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_H264_DXVA_Decoder_6.7z

[Reino]

Playback doesn't start at all with this one (which is based on r4390), but I believe you've already noticed that when I see GoogleTranslate mentioning "rollback" in r4391.

[Aleksoid1978]

Playback doesn't start at all

Test this build - http://aleksoid.voserver.net/MPC-BE/mpc-be_x86_4408.7z

[Reino]

Nope, still the same. :(
r4382 is the first one with this issue. With r4360 all is still okay. This only concerns "H.264/AVC (DXVA)". With "H.264/AVC (FFmpeg)" it's all fine.
After loading a video-file, everything is loaded; splitter, decoder, audio renderer AND video renderer. Video is black and doesn't start. After about 10sec audio starts to play, but video stays black.

[Aleksoid1978]

CoRoNe

Try this - http://aleksoid.voserver.net/MPC-BE/mpc-be_x86_4417.7z

[THX-UltraII]

Alek, could you make an updated D-Box version?

[nevcairiel]

Alek, could you make an updated D-Box version?

Didn't you once say you would be happy with a one-time special version and you wouldn't ask for more new special builds in the future? :D

[Reino]

Playback of 720p@50/60 is rather halting with r4417. No hick-ups whatsoever with r4415.

[Aleksoid1978]

Playback of 720p@50/60 is rather halting with r4417. No hick-ups whatsoever with r4415.

Can't understand you :)

[ryrynz]

He saying,

Build 4417 720p@50/60 content stutters (goes slow)
Build 4415 720p@50/60 is okay.

[Aleksoid1978]

CoRoNe
What system, what video-adapter ??
Also - try this http://aleksoid.voserver.net/MPC-BE/mpc-be_x86_4428.7z

[Aleksoid1978]

Another test build, for WinXP + DXVA1.
http://aleksoid.voserver.net/MPC-BE/mpc-be_x86_4430_DXVA1.7z

[alexins]

MPC-BE 1.3.1.1.4440 Dev.:

MPC-BE 1.3.1.1.4440 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204440/) (sourceforge.net)
MPC-BE 1.3.1.1.4440 Dev (http://dev.mpc-next.ru/index.php/topic,2159.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4440 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2158.0.html) (dev.mpc-next.ru)

[Reino]

@ Aleksoid1978: video recording (http://www.mediafire.com/download/y01387n0aeftniz/MPC-BE_recording.mkv)

r4428 = bad
r4430 = bad
r4440 = good

[alexins]

MPC-BE 1.3.1.1.4447 Dev.:

MPC-BE 1.3.1.1.4447 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204447/) (sourceforge.net)
MPC-BE 1.3.1.1.4447 Dev (http://dev.mpc-next.ru/index.php/topic,2161.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4447 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2160.0.html) (dev.mpc-next.ru)

[alexins]

MPC-BE 1.3.1.1.4461 Dev.:

MPC-BE 1.3.1.1.4461 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204461/) (sourceforge.net)
MPC-BE 1.3.1.1.4461 Dev (http://dev.mpc-next.ru/index.php/topic,2165.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4461 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2164.0.html) (dev.mpc-next.ru)

[Ceremony]

loving this player. recently switched from MPC-HC to this and really appreciate all those new handy features. I especially like the sub and audio menu in the navigation bar for a quick selection as well as that preview on seek.

However, there I have an issue with the preview:
The preview works just as intended, but it seems to be really demanding with my current setup. I am using LAV to decode, ffdshow tryouts to filter and mix both audio and video and finally madVR for the presentations.

I set a large buffer for madVR and also picked high quality resizing algorithms for the best viewing experience. Those are pretty demanding, but totally worth it :)

Unfortunately, some of these configurations seem to get applied to the preview as well. To me, these tiny previews dont need to go through all those filters and high quality interpolations (via madVR) just to end up in a tiny quick preview.

For example, I set madVR to pause on seek till the buffer is full. Now, by showing the preview, it pauses the main movie till I remain at a certain seek position and wait for the buffer to fill.

Is there a chance to introduce a separate presenter (and maybe filter queue) option just for the previews to lower resource usage for a handy little feature such as this?

P.S. It doesn't seem to be using the external filters for the preview I specified, however it does use madVR for output...

[rock]

As I can see, you guys now focus working on internal DXVA decoder and this is gonna be a big change for MPC-BE.

thanks a lot for your hard working. :)

[wanezhiling]

As I can see, you guys now focus working on internal DXVA decoder and this is gonna be a big change for MPC-BE.
http://forum.doom9.org/showthread.php?p=1664286#post1664286
The DXVA problem with the clip you post on SNB GPU has been fixed.;)

[Aleksoid1978]

@ Aleksoid1978: video recording (http://www.mediafire.com/download/y01387n0aeftniz/MPC-BE_recording.mkv)

r4428 = bad
r4430 = bad
r4440 = good

Try this:
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4457_DXVA1.7z
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4457_DXVA2.7z
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4457_DXVA3.7z

[Reino]

Thanks Aleksoid1978, but all ≥ r4440 releases work fine already. I just posted the video for you to better understand my problem, which you already fixed before that ;). I'm using r4461 right now. Thank you!

[Aleksoid1978]

Thanks Aleksoid1978, but all ≥ r4440 releases work fine already. I just posted the video for you to better understand my problem, which you already fixed before that ;). I'm using r4461 right now. Thank you!

It's don't include DXVA decoder changes :)
Please test builds from previous build in DXVA1.

[Reino]

Try this:
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4457_DXVA1.7z
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4457_DXVA2.7z
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4457_DXVA3.7zAll 3 are bad. Same stutter as you can see in video recording (http://www.mediafire.com/download/y01387n0aeftniz/MPC-BE_recording.mkv).

[v0lt]

@CoRoNe
/trunk/ - main branch, change log (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2Ftrunk%2F&isdir=1) (rus)
/branches/DXVA_decoder/ - test branch, change log (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2Fbranches%2FDXVA_decoder%2F&isdir=1&er=4399) (rus)

[Aleksoid1978]

All 3 are bad. Same stutter as you can see in video recording (http://www.mediafire.com/download/y01387n0aeftniz/MPC-BE_recording.mkv).

What adapter ?? What renderer use ?? What setting(screenshot) ??

Upload you sample for test.

[Aleksoid1978]

All 3 are bad. Same stutter as you can see in video recording (http://www.mediafire.com/download/y01387n0aeftniz/MPC-BE_recording.mkv).

What's about this :) :
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4464_5.7z

[Reino]

Still the same, Aleksoid1978 :(

[alexins]

MPC-BE 1.3.1.1.4469 Dev.:

MPC-BE 1.3.1.1.4469 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204469/) (sourceforge.net)
MPC-BE 1.3.1.1.4469 Dev (http://dev.mpc-next.ru/index.php/topic,2167.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4469 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2166.0.html) (dev.mpc-next.ru)

[Rise]

What's new on the 1.3.1.1. 4469 version?
By the way, i'm using since 1.3.1.1 4390 and recently it has became quite heavy and sometimes stutter when playing videos. What could be the cause?

In MPC-HC, even with ffdshow and lav filters on, this problem does not happen. Maybe it's the internal codecs?

[Aleksoid1978]

What's new on the 1.3.1.1. 4469 version?
By the way, i'm using since 1.3.1.1 4390 and recently it has became quite heavy and sometimes stutter when playing videos. What could be the cause?

In MPC-HC, even with ffdshow and lav filters on, this problem does not happen. Maybe it's the internal codecs?

Maybe you upload a sample.
What os, video-adapter, MPC-BE settings ??

[alexins]

MPC-BE 1.3.1.1.4477 Dev.:

MPC-BE 1.3.1.1.4477 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204477/) (sourceforge.net)
MPC-BE 1.3.1.1.4477 Dev (http://dev.mpc-next.ru/index.php/topic,2169.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4477 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2168.0.html) (dev.mpc-next.ru)

[rock]

@wanezhiling
yes, and I just tried latest beta MPC-BE 1.3.1.1.4477, now my clip looks fine with internal DXVA

from about said that FFmpeg compiler: GCC 4.8.3, afaik latest one is 4.8.2

[Rise]

Maybe you upload a sample.
What os, video-adapter, MPC-BE settings ??

Currently i'm using XP, onboard video adapter and VM9 Renderless as video renderer, rest is stock. My problem is just like you can see on CoRoNe's video recording. I'm going to test this new version, but i think you guys should show the updated changelog on the new version's readme .. Also, great job!

[Dark Eiri]

I took bicycleestate's Flatro toolbar for MPC-HC, changed the color to white and added Audio and Subtitles buttons, thus making it compatible with MPC-BE

Just rename your preferred size file to "toolbar.png".

There's something though... if you open MPC-BE by itself, the toolbar will look kinda weird... like it's missing anti-aliasing or something. It fixes itself when a file is opened.

Hope you guys like it.

http://i59.tinypic.com/2uxuzk6.jpg

This is 24x24 size.

[ryrynz]

If we could get that that playlist window color fixed up..

[twtrade]

I took bicycleestate's Flatro toolbar for MPC-HC, changed the color to white and added Audio and Subtitles buttons, thus making it compatible with MPC-BE

Just rename your preferred size file to "toolbar.png".

There's something though... if you open MPC-BE by itself, the toolbar will look kinda weird... like it's missing anti-aliasing or something. It fixes itself when a file is opened.

Hope you guys like it.

http://i59.tinypic.com/2uxuzk6.jpg

This is 24x24 size.

Looks good Dark Eiri! Thanks for adding my Flatro toolbar to MPC-BE.

[alexins]

MPC-BE 1.3.1.1.4486 Dev.:

MPC-BE 1.3.1.1.4486 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204486/) (sourceforge.net)
MPC-BE 1.3.1.1.4486 Dev (http://dev.mpc-next.ru/index.php/topic,2173.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4486 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2172.0.html) (dev.mpc-next.ru)

[Dark Eiri]

Looks good Dark Eiri! Thanks for adding my Flatro toolbar to MPC-BE.

Oh, it is I who should be thankful for your beautiful design! :D

Thanks so much for sharing your work with us!

Also, would you give me permission to try to port your icons as well?

[alexins]

MPC-BE 1.3.1.1.4496 Dev.:

MPC-BE 1.3.1.1.4496 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204496/) (sourceforge.net)
MPC-BE 1.3.1.1.4496 Dev (http://dev.mpc-next.ru/index.php/topic,2176.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4496 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2175.0.html) (dev.mpc-next.ru)

[Snappy Phoenix]

When will the next non Beta be released? I've neen on 1.3.0.3 forever and I hate installing the beta with the big BETA wording on the man toolbar all the time

[Lord Maius]

Italian translation rev.4491
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt

[Lord Maius]

I took bicycleestate's Flatro toolbar for MPC-HC, changed the color to white and added Audio and Subtitles buttons, thus making it compatible with MPC-BE

Just rename your preferred size file to "toolbar.png".

There's something though... if you open MPC-BE by itself, the toolbar will look kinda weird... like it's missing anti-aliasing or something. It fixes itself when a file is opened.

Hope you guys like it.

http://i59.tinypic.com/2uxuzk6.jpg

This is 24x24 size.

Amazing!

[Aleksoid1978]

Still the same, Aleksoid1978 :(

Try this:
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4489_10.7z
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_4489_11.7z

[alexins]

MPC-BE 1.3.1.1.4503 Dev.:

MPC-BE 1.3.1.1.4503 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204503/) (sourceforge.net)
MPC-BE 1.3.1.1.4503 Dev (http://dev.mpc-next.ru/index.php/topic,2180.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4503 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2179.0.html) (dev.mpc-next.ru)

[Reino]

Aleksoid1978, both are good now. Thank you!

[Dark Eiri]

Is there any way to port the Audio Switcher from HC? (so you can select maximum boost for normalization instead of a fixed amount, I found that it does amplify audio in a nicer way than BE results)

[ryrynz]

There's something though... if you open MPC-BE by itself, the toolbar will look kinda weird... like it's missing anti-aliasing or something. It fixes itself when a file is opened.


http://s18.postimg.org/bha9auibt/Image2.jpg (http://postimage.org/)

Aleksoid can we get this fixed? As Dark Eiri said once a file is opened all buttons look correct like the play button.
Also I think this should be the default theme XD

Actually edited the 24 size it to make it a touch darker and to fix up the sound icon which looked different when clicked (Same issue I reported with original BE sound icon interestingly, not sure why nobody notices these things XD)

Had to remove one of the sound waves so it wasn't all squished in the circle with the speaker being the correct size and all.

http://s6.postimg.org/4wo8onn0h/Image5.png (http://postimage.org/)

Download here (http://s6.postimg.org/gaarzuxj5/toolbar.png), If you prefer the toolbar brighter or darker just edit the brightness it in a image editor and save.

[Dark Eiri]

@ryrynz: for it to be default, you guys would have to ask twtrade, it's his theme, I just tweaked it for BE! And yes, that antialiasing thing is very weird! I just noticed the volume button too! Haha-

I'm also porting his Icon set, this is how it's turning out. If I get his approval, I'll publish a x86 and a x64 .dll ASAP.

http://i62.tinypic.com/2rdbxw4.png

[ryrynz]

Those look nice and fit BE well, looking forward to it.

[Lord Maius]

Is it possible to update installer translation?
If yes, how?

[beter]

Is it possible to update installer translation?
If yes, how?

trunk/distrib/custom_messages.iss

[Dark Eiri]

Well, I decided to port everything! Since I did the toolbar and the icons, there was little left for it to be a full port, so I decided to do all the extras as well.
I'll be publishing Flatro Dark for MPC-BE as soon as I get the twtrade's approval for the "remix" :)

[Aleksoid1978]

Aleksoid can we get this fixed? As Dark Eiri said once a file is opened all buttons look correct like the play button.
Also I think this should be the default theme XD


When MPC-BE just started and when file opened - button have different state(disabled/enabled). We do not draw this image - it's do a Visual Studio(mfc). It's use different draw for disabled/enabled state.

[ryrynz]

When MPC-BE just started and when file opened - button have different state(disabled/enabled). We do not draw this image - it's do a Visual Studio(mfc). It's use different draw for disabled/enabled state.

Can't just set it to enabled then? I see MPC-HC has exact same issue. =/

[alexins]

MPC-BE 1.3.1.1.4510 Dev.:

MPC-BE 1.3.1.1.4510 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204510/) (sourceforge.net)
MPC-BE 1.3.1.1.4510 Dev (http://dev.mpc-next.ru/index.php/topic,2185.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4510 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2184.0.html) (dev.mpc-next.ru)

[Dark Eiri]

As I got the authorization from twtrade, I can now publish my port. I'm happy to share with you FLATRO BE.

http://i62.tinypic.com/5djeoh.png

Full Pack:
x64 - Flatro BE v0.5 - Based on MPC-BE SVN 4503 (http://www.mediafire.com/download/tbk4ik28q9tf1p9/FlatroBE_x64_0.5.rar)
x86 - coming soon

Install Instructions:

1. Replace existing mpc-be.exe / mpc-be64.exe and mpciconlib.dll with the ones supplied
2. Re-apply the file associations in Options \ Player \ Formats
3. Enjoy!

Modular Packs:
x64 - mpciconlib.dll - File Association Icons only (0.5) (http://www.mediafire.com/download/cemevm7axutspt3/FlatroBE_iconDLLx64_0.5.rar)
x86 - mpciconlib.dll - File Association Icons only (0.5) (http://www.mediafire.com/download/1834r13vchal1eq/FlatroBE_iconDLLx86_0.5.rar)

Controls Toolbar only - 24px (0.5) (http://www.mediafire.com/download/cycyx92b2ob39tn/FlatroBE_toolbar_24px.rar)
Controls Toolbar only - 32px (0.5) (http://www.mediafire.com/download/7y8a91rzprkqfro/FlatroBE_toolbar_32px.rar)

------------------------------

If you share this theme please dont remove the credits.

(c) Trade Wind Presents / http://www.tradewindpresents.com

Remixed and Ported to MPC-BE by guimagination @ DeviantArt / Dark Eiri @ doom9 Forums

This Theme is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License.

Original source for status and file icon provided by Syncfusion's Metro Studio 2.

Orignal source for musical note and video strip icon provided by dAKirby309 - http://goo.gl/AOtlxj

-----------------------------------

Can I make a thread for this or do you guys prefer for me to continue updating this post?

[alexins]

MPC-BE 1.3.1.1.4517 Dev.:

MPC-BE 1.3.1.1.4517 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204517/) (sourceforge.net)
MPC-BE 1.3.1.1.4517 Dev (http://dev.mpc-next.ru/index.php/topic,2188.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4517 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2187.0.html) (dev.mpc-next.ru)

[Aleksoid1978]

Greetings to all.
Who interesting in internal WASAPI audio renderer - please test this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_test_5.7z
Add A/V sync mechanism.

[agustin9]

Aleksoid, can we have the really old toolbar, the original of the be mod? I love the way the buttons look and that we can change the color
http://i.imgur.com/sc2Cq.png
Please!!

[alexins]

MPC-BE 1.3.1.1.4544 Dev.:

MPC-BE 1.3.1.1.4544 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204544/) (sourceforge.net)
MPC-BE 1.3.1.1.4544 Dev (http://dev.mpc-next.ru/index.php/topic,2202.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4544 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2201.0.html) (dev.mpc-next.ru)

[kerimcem]

Greetings to all.
Who interesting in internal WASAPI audio renderer - please test this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_test_5.7z
Add A/V sync mechanism.
works well..no problem..

[SamKook]

Same here so far, but the previous builds rarely showed problems so it's hard to tell. I'll have to watch a few movie today to test it better.

[alexins]

MPC-BE 1.3.1.1.4550 Dev.:

MPC-BE 1.3.1.1.4550 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204550/) (sourceforge.net)
MPC-BE 1.3.1.1.4550 Dev (http://dev.mpc-next.ru/index.php/topic,2206.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4550 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2205.0.html) (dev.mpc-next.ru)

[rock]

@Dark Eiri

http://i.imgur.com/OWDEkGi.png

I guess those four buttons don't match with the function of each buttons


@dev
showing logo before playing video would look good, I guess :)

[Snappy Phoenix]

MPC-BE 1.3.1.1.4550 Dev.:

MPC-BE 1.3.1.1.4550 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204550/) (sourceforge.net)
MPC-BE 1.3.1.1.4550 Dev (http://dev.mpc-next.ru/index.php/topic,2206.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4550 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2205.0.html) (dev.mpc-next.ru)

when will we get an updated official? 1.3.0.3 has been out since ages

[ryrynz]

Yeah they're a little slack in this area. But honestly the nightlies are basically updated officals.

[Snappy Phoenix]

Yeah they're a little slack in this area. But honestly the nightlies are basically updated officals.

I don't like having BETA spelled out all over in the title bar :stupid:

[ryrynz]

Just hide the menu, it looks ugly anyway (I use frame only) It all can be accessed via the right click context menu.

I guess it wouldn't be silly to just remove the beta tag from the builds anyway. Alexins/Aleksoid since you just constantly make new builds for release
why not just remove the beta from the title? If not I guess we'd have some luck with Shark007 removing it from his builds if they don't want to..

[SamKook]

Greetings to all.
Who interesting in internal WASAPI audio renderer - please test this build http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_test_5.7z
Add A/V sync mechanism.

In shared mode, there are small audio glitches once in a while(2-3 times during a movie) mostly with DTS, but sometimes AC3 too, all 5.1 channels.

In exclusive mode, mostly with DTS audio(it only happened once with AC3 after seeking), there's a channel that goes silent or at least quieter(seems to be the right one, it's hard to tell with certainty using headphones) quite often(20+ times per movie).
Seeking or pausing and resuming fixes it most of the time but not always. It eventually always does after a couple of tries though.

This was using LAVfilters(since it was the one who had more problems with A/V sync last time) and outputting at 24 bit integer.

Edit: In exclusive mode with the internal filters instead of LAV, it doesn't lose a channel, but it does glitch instead.

[Dark Eiri]

@Dark Eiri
I guess those four buttons don't match with the function of each buttons


Just noticed BE has a different arrangement of buttons than HC.
Since I always hide the toolbar and never use those buttons, I didn't notice it till now. Will fix soon.

[Aleksoid1978]

In shared mode, there are small audio glitches once in a while(2-3 times during a movie) mostly with DTS, but sometimes AC3 too, all 5.1 channels.

In exclusive mode, mostly with DTS audio(it only happened once with AC3 after seeking), there's a channel that goes silent or at least quieter(seems to be the right one, it's hard to tell with certainty using headphones) quite often(20+ times per movie).
Seeking or pausing and resuming fixes it most of the time but not always. It eventually always does after a couple of tries though.

This was using LAVfilters(since it was the one who had more problems with A/V sync last time) and outputting at 24 bit integer.

Edit: In exclusive mode with the internal filters instead of LAV, it doesn't lose a channel, but it does glitch instead.

Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_test_9_4_4.7z

[SamKook]

Try this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_test_9_4_4.7z

Still glitching with the internal codecs at roughly the same rate, haven't tried LAV.

[Aleksoid1978]

Still glitching with the internal codecs at roughly the same rate, haven't tried LAV.

Thanks. I see it's now too :)

[Aleksoid1978]

Still glitching with the internal codecs at roughly the same rate, haven't tried LAV.

Can you test this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_test_9_4_5.7z and upload a log file from you desktop.

About glitch - it happens at the same time or at different ??

[THX-UltraII]

@MPC-BE team:

You guys developed a D-Box version for us D-Box users some time ago. First of all we D-Box users are very happy with it and we appriciate it so much that you guys did this for us. MPC-BE D-Box is currently still the only and so exclusive solution for D-Box users that want to enjoy HD-audio + D-Box simultanously.

However, there is still a bug that exists:
The problem is there when playing a TrueHD track. MPC-BE D-Box crashes when playing that. You guys have to know that we D-Box users use LAV filters + madVR. So ALL INTERNAL FILTERS are unchecked and LAV audio decoder, LAV video decoder, LAV splitter and LAV source splitter. In my case my selected primary audio device is my AMD hd-audio selected as DIRECT SOUND. My second audio device (Dual Audio Output box in MPC-BE checked) is my on-board SPDIF optical output also selected as DIRECT SOUND. My primary audio device is my 270x GPU and the HD-Audio is send through this to my AVR (also with the video signal of course). My second audio device (on-board SPDIF output) runs to my D-Box decoder which picks up the core signal from this and is able to 'read' this. With DTS-MA this all works fine. I have read somewhere that the core DTS signal in somehow 'packed in' the DTS-MA signal so it makes sense this works. However, when playing a TrueHD file MPC-BE D-Box crashes. I ve read that the Dolby Digital signal comes as a complete separate stream and does not work the same as DTS-MA/DTS. I THINK that this might be the problem.

Please let me know if you guys understand the problem described above and if there maybe is a fix for this possible. Also let us know if you need more info.

gr. Sander (and all other D-Box users).

[Aleksoid1978]

@MPC-BE team:

You guys developed a D-Box version for us D-Box users some time ago. First of all we D-Box users are very happy with it and we appriciate it so much that you guys did this for us. MPC-BE D-Box is currently still the only and so exclusive solution for D-Box users that want to enjoy HD-audio + D-Box simultanously.

However, there is still a bug that exists:
The problem is there when playing a TrueHD track. MPC-BE D-Box crashes when playing that. You guys have to know that we D-Box users use LAV filters + madVR. So ALL INTERNAL FILTERS are unchecked and LAV audio decoder, LAV video decoder, LAV splitter and LAV source splitter. In my case my selected primary audio device is my AMD hd-audio selected as DIRECT SOUND. My second audio device (Dual Audio Output box in MPC-BE checked) is my on-board SPDIF optical output also selected as DIRECT SOUND. My primary audio device is my 270x GPU and the HD-Audio is send through this to my AVR (also with the video signal of course). My second audio device (on-board SPDIF output) runs to my D-Box decoder which picks up the core signal from this and is able to 'read' this. With DTS-MA this all works fine. I have read somewhere that the core DTS signal in somehow 'packed in' the DTS-MA signal so it makes sense this works. However, when playing a TrueHD file MPC-BE D-Box crashes. I ve read that the Dolby Digital signal comes as a complete separate stream and does not work the same as DTS-MA/DTS. I THINK that this might be the problem.

Please let me know if you guys understand the problem described above and if there maybe is a fix for this possible. Also let us know if you need more info.

gr. Sander (and all other D-Box users).

SPDIF output do not support TrueHD Bitstream output. Only AC3/DTS. Instead TrueHD stream - select ac3(core from TrueHD). If use Internal MPEGSplitter - check AC3 output.

[THX-UltraII]

SPDIF output do not support TrueHD Bitstream output. Only AC3/DTS. Instead TrueHD stream - select ac3(core from TrueHD). If use Internal MPEGSplitter - check AC3 output.

I know that SPDIF does only support DD/DTS and not TrueHD and DTS-MA.

Let me try to explain again what I need (I will try to explain it as simple as possible because I know your English is not the best from what you ve told me).

A D-Box decoder does not have a HDMI input. It only has a optical digital input. The D-Box decoder 'reads' the CORE dolby digital or dts track. IT CAN ONLY READ THE UNALTERED DD/DTS SIGNAL!!!!

So....with DTS-MA it works fine. I think this is so because the D-Box version you created outputs the DTS-MA 2x. 1x to the first output and 1x to the second. The first DTS-MA track goes to my receiver so my receiver picks up the HDaudio track. The second DTS-MA track is send through my second audio device. I KNOW that this second audio device (my onboard SPDIF output) does not support DTS-MA. HOWEVER!!!: the CORE dts signal is somehow 'packed in' to this dts-ma signal and the spdif output sends out the CORE dts signal to my d-box decoder. So this way my d-box decoder receives the dts core signal properly.

The problem comes with a True-HD track. In a True-HD track the Dolby Digital signal that my D-Box decoder needs is not packed into the TrueHD track. So what needs to be done is that the TrueHD track is send through one audio device and the Dolby Digital track has to be send through my other audio device to my D-Box decoder. This way my D-Box decoder can read the UNALTERED Dolby Digital track and my receiver plays the True-HD track.

I hope you understand what it is that I m needing with a TrueHD track.

So to summarize:
A DTS-MA has to lossy dts core signal packed with it and that s why this works for d-box users because the dts-ma is send to the avr and the same dts-ma has dts packed in it and is send to the d-box decoder.

a TrueHD track does not contain the lossy dd track in it. But the lossy dd track is there on the disc! It is only separate. So the fix for TrueHD is to send the TrueHD track to one audio device and the separate Dolby Digital track through the other audio device!

[SamKook]

Can you test this build - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_WASAPI_test_9_4_5.7z and upload a log file from you desktop.

About glitch - it happens at the same time or at different ??

Here's a log:
2014.03.02 10:11:37.751 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 10100[576], packet type : New
2014.03.02 11:06:08.383 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 176242[10164], packet type : New
2014.03.02 11:07:26.279 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 3080[168], packet type : New
2014.03.02 11:15:28.561 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 3100[168], packet type : New
2014.03.02 11:20:54.499 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 96508[5556], packet type : New
2014.03.02 11:20:54.899 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 3202[180], packet type : New
2014.03.02 11:20:55.797 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 86060[4956], packet type : New
2014.03.02 11:20:57.949 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 146624[8448], packet type : New
2014.03.02 11:20:58.397 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 159632[9204], packet type : New
2014.03.02 11:21:06.281 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 9854[564], packet type : New

I resumed it after pausing it to get something to eat at around 11:06.
I seeked a couple time in a row at 11:20 which is why there are so many at that time I assume.
I only heard 2 or 3 in an hour and a half so it's better than the last build or the source somehow made it act different today.

They never happen at the same time. I made sure it wasn't a problem with the source the couple of first time by seeking back and listening back to where the glitch happened.

Edit:
Here's the one for the second movie:
2014.03.02 11:45:01.067 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 20000[1152], packet type : New
2014.03.02 11:45:03.117 : CMpcAudioRenderer::RenderWasapiBuffer() : add silence : 9872[564], packet type : New

That's when I started it. I didn't hear anything at that time and no glitch during the whole movie.
Never paused or seeked in it.

[SamKook]

There's also one bug unrelated to wasapi I encountered recently.
When you seek past the end of a video with EVR CP in fullscreen, it doesn't exit fullscreen, you have to seek back and let it play until the end for it to actually exit.
I tested it with madvr and it doesn't do it, but I haven't tested any other renderer.
MPCHC doesn't have that problem with EVR CP.

[Dark Eiri]

@dark eiri

http://i.imgur.com/owdekgi.png

i guess those four buttons don't match with the function of each buttons


fixed.

[rock]

@Dark Eiri
thanks, now it looks fit and better
anyway please update 32x32 and also on dev.mpc-next.ru :)

[alexins]

MPC-BE 1.3.1.1.4563 Dev.:

MPC-BE 1.3.1.1.4563 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204563/) (sourceforge.net)
MPC-BE 1.3.1.1.4563 Dev (http://dev.mpc-next.ru/index.php/topic,2210.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4563 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2209.0.html) (dev.mpc-next.ru)

[Aleksoid1978]

There's also one bug unrelated to wasapi I encountered recently.
When you seek past the end of a video with EVR CP in fullscreen, it doesn't exit fullscreen, you have to seek back and let it play until the end for it to actually exit.
I tested it with madvr and it doesn't do it, but I haven't tested any other renderer.
MPCHC doesn't have that problem with EVR CP.

Fixed. Also - fixed A/V desync with WASAPI renderer.

[Dark Eiri]

@Dark Eiri
thanks, now it looks fit and better
anyway please update 32x32 and also on dev.mpc-next.ru :)

Now it's PROPERLY fixed. Both versions, new outlining and ready to ship with v0.8 :D

Thanks for the issue report!

EDIT: another Fix!

[rock]

@Dark Eiri
another feedback (sorry if annoying)
from what I see on forums, now next button is still using wrong image. your previous post was correct.
would you like to fix another missing icon from iconlib? as I know, you ported it from Flatro MPC-HC. iconlib from MPC-BE and MPC-HC are different (for example HC doesn't have F4V). :D
anyway these icons looks smooth and clean, personally I love it. thanks to twtrade and you :)

[Dark Eiri]

@Dark Eiri
another feedback (sorry if annoying)
from what I see on forums, now next button is still using wrong image. your previous post was correct.
would you like to fix another missing icon from iconlib? as I know, you ported it from Flatro MPC-HC. iconlib from MPC-BE and MPC-HC are different (for example HC doesn't have F4V). :D
anyway these icons looks smooth and clean, personally I love it. thanks to twtrade and you :)

You're not annoying me, in any way! Au contraire! I'm truly grateful, since I'm very clumsy with finishing touches haha :D

The toolbars are fixed, that button simply missed my attention in the re-making.

Well, I did notice that A LOT of icons are missing (since I need to change the icons on the DLL one at a time, it's quite a boring process - the iconlib from BE is gigantic).

For the time being, I'm using the "same family" icons (MT2S for MTS, for example), since I'm using twtrade's resources. So I would need him to do a F4V icon or supply me with his PSDs so I can make one directly.

[v0lt]

Well, I did notice that A LOT of icons are missing (since I need to change the icons on the DLL one at a time, it's quite a boring process - the iconlib from BE is gigantic).
It can reduce up to 4 icons (IDI_DEFAULT_ICON, IDI_DEFAULT_VIDEO_ICON, IDI_DEFAULT_AUDIO_ICON, IDI_PLAYLIST_ICON). There's a simple code.

[Dark Eiri]

It can reduce up to 4 icons (IDI_DEFAULT_ICON, IDI_DEFAULT_VIDEO_ICON, IDI_DEFAULT_AUDIO_ICON, IDI_PLAYLIST_ICON). There's a simple code.

Actually it's quite the reverse... I like that BE is very specific and allows me to have a very explicit icon to show me what kind of file I'm dealing with. But I don't have icons for all of the extensions available the resources I'm using.

[twtrade]

Actually it's quite the reverse... I like that BE is very specific and allows me to have a very explicit icon to show me what kind of file I'm dealing with. But I don't have icons for all of the extensions available the resources I'm using.

Let me know the full list of icon extensions that are missing (and the type, i.e. audio, video, etc) and I'll upload them for you to implement into MPC-BE's icon lib.

[alexins]

MPC-BE 1.3.1.1.4572 Dev.:

MPC-BE 1.3.1.1.4572 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204572/) (sourceforge.net)
MPC-BE 1.3.1.1.4572 Dev (http://dev.mpc-next.ru/index.php/topic,2216.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4572 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2215.0.html) (dev.mpc-next.ru)

[P.J]

Sorry to ask this but I couldn't find the differences between MPC-BE and MPC-HC :(

[v0lt]

@P.J
MPC-BE visually darker.

[SamKook]

Also BE internal audio renderer actually works, the old internal codecs have many improvements, it has youtube support, doesn't go to fullscreen before initializing the window which is quite annoying since it force madvr to switch from windowed to fullscreen mode and has a couple of different default settings.
MPCHC now use LAVfilters has its internal codecs.

There's probably much more differences, but if all you do is play video and don't care about anything else, then v0lt answer is what you're looking for.

[Snappy Phoenix]

Sorry to ask this but I couldn't find the differences between MPC-BE and MPC-HC :(

the interface is night and day better, it doesn't have the stupid in built LAV filters, so you get to choose which ever version of LAV works best for you

[Dark Eiri]

Let me know the full list of icon extensions that are missing (and the type, i.e. audio, video, etc) and I'll upload them for you to implement into MPC-BE's icon lib.

Oh thank you so much! I'll work on a list!

[SamKook]

it doesn't have the stupid in built LAV filters, so you get to choose which ever version of LAV works best for you

What do you mean with you get to choose which ever version of LAV works best for you?
You can do that too with MPCHC, just disable its internal filters and use external LAV or you can even replace the internal one with whichever version of LAV you want to use.

[alexins]

MPC-BE 1.3.1.1.4580 Dev.:

MPC-BE 1.3.1.1.4580 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204580/) (sourceforge.net)
MPC-BE 1.3.1.1.4580 Dev (http://dev.mpc-next.ru/index.php/topic,2220.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4580 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2219.0.html) (dev.mpc-next.ru)

[alexins]

MPC-BE 1.3.1.1.4595 Dev.:

MPC-BE 1.3.1.1.4595 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204595/) (sourceforge.net)
MPC-BE 1.3.1.1.4595 Dev (http://dev.mpc-next.ru/index.php/topic,2226.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4595 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2225.0.html) (dev.mpc-next.ru)

[Snappy Phoenix]

MPC-BE 1.3.1.1.4595 Dev.:

MPC-BE 1.3.1.1.4595 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204595/) (sourceforge.net)
MPC-BE 1.3.1.1.4595 Dev (http://dev.mpc-next.ru/index.php/topic,2226.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4595 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2225.0.html) (dev.mpc-next.ru)

when will we see a final version of MPC-BE 1.3.0.3 has been the latest official for ages

[alexins]

when will we see a final version of MPC-BE 1.3.0.3 has been the latest official for ages
Within 7-9 days.

[Ceremony]

Within 7-9 days.i expected a "when its done" ;-)

any chance we can get the speed up/slow down buttons back (like in mpc-hc)? I always found them pretty handy :)

[Aleksoid1978]

any chance we can get the speed up/slow down buttons back (like in mpc-hc)?

No ...

[Snappy Phoenix]

Within 7-9 days.

PERFECT! thank you so much! MPC-BE is the best player ever after MPC-HC became so bloated and its interface is so ugly compared to MPC-BE

keep it up man :cool:

[the_weirdo]

MPC-HC became so bloated

Tell me how MPC-HC is "so bloated"? I'm under impression that for some reasons, you hate MPC-HC so much that you try to take any opportunities to denigrate it even you don't have any clue in what you said.

Note that I'm not a regular MPC-HC user anymore and I'm not trying to defend it, I'm just annoyed by your attitude towards it.

[Lord Maius]

Italian translation. Rev 4535
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt

[ryrynz]

Tell me how MPC-HC is "so bloated"?

It's not like I've gone through the code or anything but it's my understanding that it's not bloated in the slightest, in fact.. I feel any changes made to reduce bloat would likely happen in the MPC-HC trunk rather than the BE fork.

[alexins]

Italian translation. Rev 4535
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt
:thanks:

[alexins]

MPC-BE 1.3.1.1.4603 Dev.:

MPC-BE 1.3.1.1.4603 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204603/) (sourceforge.net)
MPC-BE 1.3.1.1.4603 Dev (http://dev.mpc-next.ru/index.php/topic,2232.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4603 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2231.0.html) (dev.mpc-next.ru)

[alexins]

MPC-BE 1.3.1.1.4613 Dev.:

MPC-BE 1.3.1.1.4613 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204613/) (sourceforge.net)
MPC-BE 1.3.1.1.4613 Dev (http://dev.mpc-next.ru/index.php/topic,2234.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4613 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2233.0.html) (dev.mpc-next.ru)

[alexins]

MPC-BE 1.3.1.1.4624 Dev.:

MPC-BE 1.3.1.1.4624 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204624/) (sourceforge.net)
MPC-BE 1.3.1.1.4624 Dev (http://dev.mpc-next.ru/index.php/topic,2239.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4624 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2238.0.html) (dev.mpc-next.ru)

[alexins]

MPC-BE 1.3.1.1.4629 Dev.:

MPC-BE 1.3.1.1.4629 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204629/) (sourceforge.net)
MPC-BE 1.3.1.1.4629 Dev (http://dev.mpc-next.ru/index.php/topic,2242.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4629 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2241.0.html) (dev.mpc-next.ru)

[Snappy Phoenix]

Tell me how MPC-HC is "so bloated"? I'm under impression that for some reasons, you hate MPC-HC so much that you try to take any opportunities to denigrate it even you don't have any clue in what you said.

Note that I'm not a regular MPC-HC user anymore and I'm not trying to defend it, I'm just annoyed by your attitude towards it.

It has LAV built in, nuff said

I tried to disable it and use my preferred version of LAV, but then I still see it is using its own built in version when I right click while playing the video

[SamKook]

It has LAV built in, nuff said

I tried to disable it and use my preferred version of LAV, but then I still see it is using its own built in version when I right click while playing the video

And MPCBE has its own filters built in, what's your point?

You're doing something wrong if you can't disable them.
Worst case, you can simply delete the LAVFilters folder in MPCHC root folder and it will be gone.

[alexins]

MPC-BE 1.3.1.1.4640 Dev.:

MPC-BE 1.3.1.1.4640 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204640/) (sourceforge.net)
MPC-BE 1.3.1.1.4640 Dev (http://dev.mpc-next.ru/index.php/topic,2250.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4640 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2249.0.html) (dev.mpc-next.ru)

[alexins]

MPC-BE 1.3.1.1.4651 Dev.:

MPC-BE 1.3.1.1.4651 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204651/) (sourceforge.net)
MPC-BE 1.3.1.1.4651 Dev (http://dev.mpc-next.ru/index.php/topic,2255.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4651 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2254.0.html) (dev.mpc-next.ru)

[kerimcem]

[link removed per rule 13; if we can't read the content we can't vet it]

youtube some videos will not open and save

[alexins]

MPC-BE 1.3.1.1.4664 Dev.:

MPC-BE 1.3.1.1.4664 Dev (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.3.1.1%20-dev%20build%204664/) (sourceforge.net)
MPC-BE 1.3.1.1.4664 Dev (http://dev.mpc-next.ru/index.php/topic,2258.0.html) (dev.mpc-next.ru)
MPC-BE 1.3.1.1.4664 for D-BOX Dev (http://dev.mpc-next.ru/index.php/topic,2257.0.html) (dev.mpc-next.ru)