Media Player Classic - BE Win32/x64

[THX-UltraII]

Dual audio output support - http://aleksoid.voserver.net/MPC-BE/mpc-be_x86.3135.7z
Test please.

One condition - AudioSwitcher must enabled;

Just tested. It seems to work almost good already. I have simultaneously audio output but the only problem is that I only get the core signal on my AVR (So no DTS-MA but only DTS). My D-Box decoder receives the (core) signal that it needs perfect.

http://s12.postimg.org/s4j0afiyx/Untitled.jpg (http://postimg.org/image/s4j0afiyx/)

http://s23.postimg.org/8r1f2w25j/Untitled.jpg (http://postimg.org/image/8r1f2w25j/)

http://s15.postimg.org/uv33de4gb/Untitled3.jpg (http://postimg.org/image/t3a4ihl3b/full/)
free image hosting (http://postimage.org/)

ps. On the second picture you see my D-Box software that works perfect with this version of MPC-BE! (Optical Sync notification which means that it works)

[Aleksoid1978]

THX-UltraII
Your AVR support DTS-HD ?? What setting in LAVAudio. How it's work in previous version with only one audio output ??

P.S. I think i understand what happened - if D-Box decoder support only DTS(core), audio decoder failed from DTS-HD bitstream to DTS core only. As you see - use only one audio decoder.

[THX-UltraII]

THX-UltraII
Your AVR support DTS-HD ?? What setting in LAVAudio. How it's work in previous version with only one audio output ??

My AVR supports DTS, DD, True-HD, DTS-MA etc etc. I have the newest topmodel from Onkyo.

Settings in LAV are the settings I always use: checkboxes with Dolby Digital (AC-3), Doly Digital Plus (E-AC3), Dolby TrueHD, DTS and DTS-HD.

I can tell you that with this MPC-HC version that has dual-audio output implemented it works http://en.sourceforge.jp/projects/sfnet_mpc-hc-dboite/. Also with that version it is not needed to check the BUILD-IN AUDIO SWITCHER option. It works with and without this option. (ps. With 'IT WORKS' i mean that i the core DTS track is send to my d-box decoder and the DTS-MA track is send to my AVR)

P.S. I think i understand what happened - if D-Box decoder support only DTS(core), audio decoder failed from DTS-HD bitstream to DTS core only. As you see - use only one audio decoder.I m not following you here. Can you try to explain again in other words?
You ARE right that the D-Box decoder ONLY works when it receives the UNALTERED CORE signal, so the core dts or Dolby Digital track. So I use my on-board spdif audio 'card' for the D-Box decoder (you can see this as soundcard 1) and motherboards HDMI output (you can see this as soundcard 2) for my AVR (which passes through the picture and hopefully will pass through the lossless DTA-MA or True-HD track soon :))

[THX-UltraII]

EDIT:
I have more information for you. (I m at work and will be back home within a few hours so I can give you better information that you might need):

With the MPC-HC version made by a D-Box user http://en.sourceforge.jp/projects/sfnet_mpc-hc-dboite/ I did always see TWO times LAV Audio Decoder in the filter list when playing a movie. With the version you made you can see that I only see ONE lav Audio Decoder in the filter list when playing a movie.

Maybe this information is important for you?

[Aleksoid1978]

Multiply AudioDecoder for one audio track it's a bad idea. I make - multiply output from audio decoder to different audio renderer.

My English is bad, so I can not explain all the reasons it is such an implementation. But - as is done in mpc-hc-dboite - bad, and does not always work.

[THX-UltraII]

Multiply AudioDecoder for one audio track it's a bad idea. I make - multiply output from audio decoder to different audio renderer.

My English is bad, so I can not explain all the reasons it is such an implementation. But - as is done in mpc-hc-dboite - bad, and does not always work.I have had no problems with the mpc-hc-dboite version. To me it seems that it works good but of course you are a specialist and I am not :)

What is your plan on making it work for me?

[THX-UltraII]

And another little question: how can i choose what to do after playback? I want mpcbe to auto close after playing one time

[SamKook]

And another little question: how can i choose what to do after playback? I want mpcbe to auto close after playing one time

Menu Play->After Playback->Exit(The one in the every time section)

[wanezhiling]

http://pan.baidu.com/share/link?shareid=4287665566&uk=3558042035
Image stops since 14sec, LAV splitter works fine.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=4287665566&uk=3558042035
Image stops since 14sec, LAV splitter works fine.

Thanks. Fixed.

[mindbomb]

were the problems with av sync and wasapi solved?
the discussion about it in this thread sorta just disappeared.

[SamKook]

Seems good with the internal audio decoder at least. I finally set up my htpc properly 2 days ago to test it and haven't had sync problems yet. I'll try again with LAV and see what happens.

[Aleksoid1978]

I also use MPC Audio Renderer + WASAPI Exclusive + internal audio decoder. Use bitstream output and via decoding to PCM, and also good, no A/V desync.

[THX-UltraII]

Hi Alek,

Did you get my PM maybe?

Are you planning on looking for a fix for the feature I m looking for in MPC-BE?

[Aleksoid1978]

Hi Alek,

Did you get my PM maybe?

Are you planning on looking for a fix for the feature I m looking for in MPC-BE?

No planned yes use multiple audio decoder for dual audio support.
There are many nuances.
Example - how to be with external audio files ? If use LAVSplitter & only internal audio stream all will be ok, but if use internal splitter, use external audio files(dub) - we can't split audio decoders for each of audio streams.

[LDD9O]

All work for me. If do not work at you side - can you make a screen video and reproduce this bug.


OSD show fine with no video (yellow colour)
showing the OSD setting
opening a video file
OSD no longer show yellow colour, it now the default colour

http://i.imgur.com/pz0j13W.gif

[Aleksoid1978]

OSD show fine with no video (yellow colour)
showing the OSD setting
opening a video file
OSD no longer show yellow colour, it now the default colour

http://i.imgur.com/pz0j13W.gif

You use madVR - it's use own OSD and it's settings can not be changed.

[Rapsody10]

Hello

Getting up to 100 cpu
Any ideas as of why and how to fix it ?

Mpc-be x64 any of the latest versions
Version 1.0.3.1x64 works ok 7-10 %cpu
the only External filter is AC3 everything else is default


Thanks in advance
Raps

[Aleksoid1978]

Hello

Getting up to 100 cpu
Any ideas as of why and how to fix it ?

Mpc-be x64 any of the latest versions
Version 1.0.3.1x64 works ok 7-10 %cpu
the only External filter is AC3 everything else is default


Thanks in advance
Raps

Can you provide MediaInfo for file, filters list and screen from TaskManager(include all process).

[Mercury_22]

Any chance you'll add audio equalizer and independent volume for every audio channel ( like in ffdshow (http://ffdshow-tryout.sourceforge.net/images/front3.png)) ?

[Aleksoid1978]

Any chance you'll add audio equalizer and independent volume for every audio channel ( like in ffdshow (http://ffdshow-tryout.sourceforge.net/images/front3.png)) ?

Maybe ... sometimes :)

[turbojet]

Is there any interest in the subtitle enhancement I mentioned at http://forum.doom9.org/showthread.php?p=1638901#post1638901

and the issue with MPC+MadVR dropping frames?

Had to switch players because of it.

[Aleksoid1978]

Is there any interest in the subtitle enhancement I mentioned at http://forum.doom9.org/showthread.php?p=1638901#post1638901

and the issue with MPC+MadVR dropping frames?

Had to switch players because of it.

About subtitle - i do not understand what you want ... english is bad.

About MadVR drop frames - what filter you use. Try only with internal and what result ??

[turbojet]

It's kind of tough to explain and I'm horrible at explaining things. The goal is to get the subtitles as close to the of the bottom of the video without disappearing. MPC puts one line subs where the last line would go with multiple lines, asking for it to go where the first line would go, near the bottom border. Subs also disappear in MPC when bottom margin is negative if there is no bottom border, instead they should show on the video. MPC would need an option to show subtitles off the video (if possible) which could be controlled by the current top and bottom options.

Same problem with internal filters, backbuffer keeps running out in MPC so dropped frames. In potplayer decoder queue drops a bit but backbuffer stays full and no dropped frames.

[ƒreeman]

It's kind of tough to explain and I'm horrible at explaining things. The goal is to get the subtitles as close to the of the bottom of the video without disappearing. MPC puts one line subs where the last line would go with multiple lines, asking for it to go where the first line would go, near the bottom border. Subs also disappear in MPC when bottom margin is negative if there is no bottom border, instead they should show on the video. MPC would need an option to show subtitles off the video (if possible) which could be controlled by the current top and bottom options.

Same problem with internal filters, backbuffer keeps running out in MPC so dropped frames. In potplayer decoder queue drops a bit but backbuffer stays full and no dropped frames.

Maybe you can post screens... :cool:

[THX-UltraII]

No planned yes use multiple audio decoder for dual audio support.
There are many nuances.
Example - how to be with external audio files ? If use LAVSplitter & only internal audio stream all will be ok, but if use internal splitter, use external audio files(dub) - we can't split audio decoders for each of audio streams.

Isn t it possible to make what MPC-HC-Dboite looks like? I know you say it is a bad idea but it works for me so if you could add this 'dual audio decoder' option I (and all D-Box/HTPC users out there) would be thankful to you eternally.

The only thing I (and all other D-Box users) use are the LAV filters (audio, video and splitter) and madVR as renderer. ALL internal filters DISabled.

ps. You may have already seen that the mpc-hc-dboite version DISabled the internal audio switcher. Don t know if this is important information for you but I thought to just mention it.

We D-Box users would be so happy if you can make this for us!

[Aleksoid1978]

Isn t it possible to make what MPC-HC-Dboite looks like? I know you say it is a bad idea but it works for me so if you could add this 'dual audio decoder' option I (and all D-Box/HTPC users out there) would be thankful to you eternally.

The only thing I (and all other D-Box users) use are the LAV filters (audio, video and splitter) and madVR as renderer. ALL internal filters DISabled.

ps. You may have already seen that the mpc-hc-dboite version DISabled the internal audio switcher. Don t know if this is important information for you but I thought to just mention it.

We D-Box users would be so happy if you can make this for us!

Maybe only for you ... i think about this. But it's can be only a temporary version.

[THX-UltraII]

Maybe only for you ... i think about this. But it's can be only a temporary version.It would be no problem at all if you make a temporary version of this only for me and not update it. And IF a very important update comes out I could always ask you to make a updated version for me?

Please let me know if I can help you with anything on building it for me or if you need me to test a version. I REALLY hope you can make this for me! Donation? :)

[v0lt]

MPC-BE v1.2.1.0 -dev build 3211 (VS2010) (http://dev.mpc-next.ru/index.php/topic,1700.msg9600.html#msg9600)

[turbojet]

Maybe you can post screens... :cool:

Original post has a link to screenshots to the subs http://www.sendspace.com/file/zg2r2g

Not sure if showing gpu/cpu, empty backbuffer would be of any benefit.

[ƒreeman]

Original post has a link to screenshots to the subs http://www.sendspace.com/file/zg2r2g

Not sure if showing gpu/cpu, empty backbuffer would be of any benefit.

I know what you mean,, I tried those too with mpc but no success.. maybe it doesn't have this option..

[Warlock]

Guys, you can configure mpc-be so he always open videos in 1280x720 resolution? No matter what the resolution of the video, I just want to mpc-be open always in 1280x720. I'm trying to understand the logic que applies to the Auto setting under Auto Fit Zoom in MPC. I do not get it. With it set as default, some videos are resized to somewhere in between 100% & 200% size, while others are resized to greater than 200% size of the original video. I can not figure out the logic that's used by the program to determine what it resizes to. Does anyone know how this setting works or what it does exactly? Is to configure it manually?

[SamKook]

Opening a 720p video and then disabling the auto-zoom option should do the trick in theory.

[Warlock]

Opening a 720p video and then disabling the auto-zoom option should do the trick in theory.

Still did not work. I tested some videos here of 640x480, the maximum that remained was 960x720. Before they were all in 1280x720 when I used the autofit option, but I had to uninstall mpc is corrupted by yesterday. After that, I could not use at 720p, now the autofit choose on their own.

[SamKook]

One detail I realized I forgot to mention while testing this is that you have to have the "remember last window position" option enabled for it to work. It's working fine on my computer that way.
You have to completely uncheck the auto-zoom option though, not use autofit(which I have no idea what it actually does).

[Warlock]

One detail I realized I forgot to mention while testing this is that you have to have the "remember last window position" option enabled for it to work. It's working fine on my computer that way.
You have to completely uncheck the auto-zoom option though, not use autofit(which I have no idea what it actually does).

I did what you said, but did not solve the problem. For example, videos with 640x480, 1280x720 usually climbed before with autofit on, now with the hint that you taught me, the mpc scale 1280x720, but the video only opens at 960x720 with black borders on the sides.

[the_weirdo]

I did what you said, but did not solve the problem. For example, videos with 640x480, 1280x720 usually climbed before with autofit on, now with the hint that you taught me, the mpc scale 1280x720, but the video only opens at 960x720 with black borders on the sides.

You can try this: View -> Video Frame -> uncheck Keep Aspect Ratio (you can even choose Override Aspect Ratio to 16:9), but do you really want to watch distorted video, because 640x480 video have 4:3 AR.

[SamKook]

videos with 640x480... the mpc scale 1280x720, but the video only opens at 960x720 with black borders on the sides.

That's normal and the intended behavior since most wouldn't want to watch a stretched video.
If that's really what you want, do what the_weirdo said and it should stretch it, but it seems that it doesn't.

I tested it and my 4:3 video stays in 4:3 even with Keep aspect ratio unchecked and Override aspect ratio to 16/9 so it seem to be a bug.
In fact, none of the options under Video Frame seem to have any effect on the video under those conditions.


Edit: OK, did a bit more testing and it seems that EVR can't change the size or the aspect ratio of the video(I forgot I still had it on since I last tested something). It works fine with EVR CP and madvr, but you have to check "Keep aspect ratio" for the "Override aspect ratio" to "16:9" to work which seems like a pretty odd behavior(MPCHC is the same), but at least it works.

[alexins]

MPC-BE 1.2.1.0.3232 Dev.:

MPC-BE 1.2.1.0.3232 Dev (VS2010 & VS2012) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203232/) (sourceforge.net)
MPC-BE 1.2.1.0.3232 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1714.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3232&er=3232&max=40&search=)

[Keiyakusha]

Aleksoid
These EVR Sync settings seem out of place where they are now. Maybe you can make something like this (https://dl.dropboxusercontent.com/u/110558786/DesktopScreens/F40BE971.png)?

Also options from File --> renderer settings can be moved there too

[wanezhiling]

http://pan.baidu.com/share/link?shareid=1441302698&uk=3558042035
Flac crash..
Works fine with lav splitter

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=1441302698&uk=3558042035
Flac crash..
Works fine with lav splitter

Playback is ok, seeking too ...

[wanezhiling]

I just reset build 3232 and play it, crash immediately

[Aleksoid1978]

I just reset build 3232 and play it, crash immediately

Test with default settings - all ok.

[wanezhiling]

I just let my colleagues test on their PCs, crash too.

We all use MPC-BE.1.2.1.0.3232.x86.exe, default setting.

[Aleksoid1978]

I just let my colleagues test on their PCs, crash too.

We all use MPC-BE.1.2.1.0.3232.x86.exe, default setting.

Try this - http://aleksoid.voserver.net/MPC-BE/mpc-be.exe.7z

[wanezhiling]

Still crash


Maybe you could see this: http://dev.mpc-next.ru/index.php/topic,1714.msg9707.html#msg9707

[alexins]

MPC-BE 1.2.1.0.3237 Dev.:

MPC-BE 1.2.1.0.3237 Dev (VS2010 & VS2012) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/MPC-BE%20v1.2.1.0%20-dev%20build%203237/) (sourceforge.net)
MPC-BE 1.2.1.0.3237 Dev (VS2010 & VS2012) (http://dev.mpc-next.ru/index.php/topic,1720.0.html) (dev.mpc-next.ru)

Changes (http://svnlog.mpc-next.ru/log.php?repname=MPC-BE+Team&path=%2F&isdir=1&sr=3237&er=3237&max=40&search=)

[Lord Maius]

ITA txt language file updated (rev.3194)
https://www.dropbox.com/s/sngpvhqkzsmujq2/mplayerc.it.rc.txt
:)

[wiak]

hey please add something like this playing info
still working on my paint.net editing skillz

playing info, would be cool to have options in settings to show codec info, resolution info in their own lines
https://dl.dropboxusercontent.com/s/un0u7dg15fazbw7/mpc-be_codecs_bitrate_view.png?token_hash=AAFEcuzj3J9Z9ftqRzoiBEh5oV5lYow5hj3qBZPzZVHWlw&dl=1

current
https://dl.dropboxusercontent.com/s/xzh0doc2cw15otv/Capture003-20130823-004330.png?token_hash=AAG2U_p77mnRVEUiHoSKnsIV7xXTmyboSxrRyaPpQoihdQ&dl=1

:stupid: