Media Player Classic - BE Win32/x64

[Reino]

Internal
FLV@360p:
__- freeze
__- correct duration
FLV@480p:
__- freeze
__- correct duration
WebM@360/480/720p:
__- no freeze
__- wrong duration.
__Video is 29sec for instance. All FLV freeze at 16sec, than that's the reported duration for all WebM.
__- Although the duration is wrong, it does play to the end. Some videos do however start over after a random amount of time the first time, but play to the end the 2nd time.
__(Btw, when 720p isn't available, instead of falling back at WebM@480p, WebM@720p falls back at FLV@480p!)
MP4@360p:
__- no freeze
__- correct duration
MP4@720p:
__- no freeze
__- correct duration
__- Videos start over after a random amount of time the first time, but play to the end the 2nd time. Audio is lost the 2nd time (1st itteration) though!

File Source
All formats:
__- Everything fine. No playback issues.

[Aleksoid1978]

Internal
FLV@360p:
__- freeze
__- correct duration
FLV@480p:
__- freeze
__- correct duration
WebM@360/480/720p:
__- no freeze
__- wrong duration.
__Video is 29sec for instance. All FLV freeze at 16sec, than that's the reported duration for all WebM.
__- Although the duration is wrong, it does play to the end. Some videos do however start over after a random amount of time the first time, but play to the end the 2nd time.
__(Btw, when 720p isn't available, instead of falling back at WebM@480p, WebM@720p falls back at FLV@480p!)
MP4@360p:
__- no freeze
__- correct duration
MP4@720p:
__- no freeze
__- correct duration
__- Videos start over after a random amount of time the first time, but play to the end the 2nd time. Audio is lost the 2nd time (1st itteration) though!

File Source
All formats:
__- Everything fine. No playback issues.

It's happened on ALL youtube clips or some times ??

P.S. what filter/source you use ? Can made & upload a screen-shot.
I use only internal source/filters - all ok, on any format. The only thing - when the speed of the internet is not enough, then begins to slow down

[Reino]

...because it happens with all combinations of filters/renderers.I have to admit, by this I meant all sorts of decoders/renderers and these were all connected to LAV Splitter. When I enable the internal FLV and MP4 Splitter, I can actually see MPC FLV/MP4 Source (Internal) or File Source (URL) --> MPC FLV/MP4 Splitter (File Source) being loaded, but in case of LAV, and no matter the Youtube-settings, it's always File Source (URL) --> LAV Splitter and never LAV Splitter Source.
It seems to be a LAV issue, because the issues I described with the Youtube-settings at Internal only happen with LAV. No problems with the internal splitter filters at all. But then again, MPC-BE rev.2443 with Youtube-settings at Internal + LAV doesn't have these issues... so who's to blame?

[alexins]

Release Candidate of Visual Studio 2012 Update 3 now available (http://support.microsoft.com/kb/2835600)

A fix for ATL & MFC XP targeting is included. This fix addresses the following scenario:
You create a C++ Win32 Console Application project in Visual Studio 2012 Update 2.
You select both ATL and MFC in the application wizard.
You change the Platform Toolset option to v110_xp, and you change Use of MFC and ATL to Static in the project Property Pages.
You run the application on a computer that is running Windows XP or Windows Server 2003.
You receive the following error message:
Application Name - Entry Point Not Found

The procedure entry point InitializeCriticalSectionEx could not be located in the dynamic link library KERNEL32.dll

[therock003]

In the filetype association options page, what does the option icons do? I want to associate some filetypes, but i want to have the default windos 8 icon showing up. I didnt check the icons box, but still i have the mpc icon on all my video files now.

[v0lt]

In the filetype association options page, what does the option icons do?
Uses icons from the mpciconlib.dll.

[therock003]

And Which icons are those in that file? Can i edit it and add my one, or set it to use the widnows default icons instead, but keep the association?

[dukestravels07]

Quite impressed with this. My GPU was usually around 50 to 60% usage. With this its about 18% max on DXVA
Does your build auto upscale dvd content or do I need to look at some settings. Thanks!

[Aleksoid1978]

In the filetype association options page, what does the option icons do? I want to associate some filetypes, but i want to have the default windos 8 icon showing up. I didnt check the icons box, but still i have the mpc icon on all my video files now.

At default - when program associate file types it set self icon. As you do not check "With icon" - set default MPC-BE icon.

[therock003]

Do you mean that it will have the icon of the application?

[alexins]

MPC-BE v1.1.1.0 -dev build 2666 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2666/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2666 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1493.0.html) (Dev. MPC-BE)

[giannifante]

Hello,
a question about the comment on commit 2652 (google translated): "Change: function to get versions of the system, as well as IsW64 () ruled in a separate file. Just optimization - now the data is cached, so the function call to obtain the release occurs only once, on the first call."
Does it affect portability of MPC-BE? I use MPC-BE without installation and move the same program (simply zipping the mpc folder) in different PCs (both 32 and 64)... where is this information cached? It is sufficient to delete .ini file to force MPC to get the OS version again?
Thx for help

[Brother John]

I’m wondering, when the “remember dvd position” and “remember file position” options are enabled, is there a way to force playback from the beginning? I expected the two start position cli arguments
mpc-be movie.mkv /start 0
mpc-be movie.mkv /startpos 00:00:00
to work as an override. But the movie still starts from the remembered position.

P.S.: MPC-BE 32bit 1.1.1.0 build 2574

[wanezhiling]

http://pan.baidu.com/share/link?shareid=476175&uk=3558042035
blackscreen.

ps: disable Reindex broken files in AVI Splitter configuration, then it works.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=476175&uk=3558042035
blackscreen.

ps: disable Reindex broken files in AVI Splitter configuration, then it works.

Fixed.

[Aleksoid1978]

I’m wondering, when the “remember dvd position” and “remember file position” options are enabled, is there a way to force playback from the beginning? I expected the two start position cli arguments
mpc-be movie.mkv /start 0
mpc-be movie.mkv /startpos 00:00:00
to work as an override. But the movie still starts from the remembered position.

P.S.: MPC-BE 32bit 1.1.1.0 build 2574

Fixed at rev. 2690;

[Lord Maius]

ITA txt language file updated rev. 2692

http://sdrv.ms/14hyVt8

[wanezhiling]

External mkv splitters (not source) cannot be used in build 2670.

[alexins]

ITA txt language file updated rev. 2692

http://sdrv.ms/14hyVt8

:thanks:

added to rev.2698 (http://svnlog.mpc-next.ru/revision.php?repname=MPC-BE+Team&peg=2697&rev=2698)

MPC-BE v1.1.1.0 -dev build 2697 (Nightly Builds) (https://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly Builds (from svn trunk)/MPC-BE v1.1.1.0 -dev build 2697/) (sourceforge)
MPC-BE v1.1.1.0 -dev build 2697 (Nightly Builds) (http://dev.mpc-next.ru/index.php/topic,1507.0.html) (Dev. MPC-BE)

[Aleksoid1978]

External mkv splitters (not source) cannot be used in build 2670.

All ok for me.

[wanezhiling]

http://pan.baidu.com/share/link?shareid=480661&uk=3558042035
Jump to 6:30 and later, mpc-be reverts to the beginning.

[Aleksoid1978]

http://pan.baidu.com/share/link?shareid=480661&uk=3558042035
Jump to 6:30 and later, mpc-be reverts to the beginning.

First - it's not a .MKV? it's a .FLV :)
About seeking - i see.

Fixed at rev. 2703;

[wanezhiling]

http://i.imgur.com/jl3lwLF.png
No effect in vmr9 renderless mode, same is mpc-hc.

[Aleksoid1978]

http://i.imgur.com/jl3lwLF.png
No effect in vmr9 renderless mode, same is mpc-hc.

Using IVMRMixerControl9::SetProcAmpControl() return VFW_E_VMR_NO_PROCAMP_HW - The graphics hardware does not support ProcAmp controls.

[wanezhiling]

Your 660ti and 7750 support?

Here, works fine in evr and madVR, but not in vmr9

[nevcairiel]

For this to work in VMR9, you have to turn off DXVA and enable VMR Mixing Mode, iirc.

[kasper93]

Using IVMRMixerControl9::SetProcAmpControl() return VFW_E_VMR_NO_PROCAMP_HW - The graphics hardware does not support ProcAmp controls.

Exactly. I have looked at this yesterday. Funny thing is that when you uncheck DXVA decoder in settings it work fine. Even if in both cases DXVA is not used.

[wanezhiling]

Funny thing is that when you uncheck DXVA decoder in settings it work fine. Even if in both cases DXVA is not used.
yes, same here.

so it should be a logic bug.

[wanezhiling]

http://i.imgur.com/vYAncpP.png
More funny thing, ms dxva + vmr9, works fine. :D

[Brother John]

Fixed at rev. 2690;
Thank you. The start position cli parameters work perfectly now.

[wanezhiling]

http://www.sendspace.com/file/op9cz6

lav s + mpc be v default = 4:3
lav s + lav v default = 4:3
mpcbe s + mpc be v default = 4:3
mpcbe s + lav v default = 3:2

[Aleksoid1978]

http://www.sendspace.com/file/op9cz6

lav s + mpc be v default = 4:3
lav s + lav v default = 4:3
mpcbe s + mpc be v default = 4:3
mpcbe s + lav v default = 3:2

LAV Video decoder do not trust MPC MP4/MOV Splitter :) and do not read AR info from splitter.

[sheppaul]

LAV Video decoder do not trust MPC MP4/MOV Splitter

Well, is this some kind of joke? :o

[Keiyakusha]

mpcbe s + lav v default = 3:2
This is correct. 3:2 is what it should be. Yes it doesn't looks right because your video stream is broken and contains wrong sar.
Yes I don't think that container info should be preferred over stream info. People should learn how to encode properly to begin with.

[Reino]

While I don't have any problems with MPC-HC, with MPC-BE I can't play certain WMV[WMV3+WMA9]-files, like Step_into_Liquid_1080.wmv (http://download.microsoft.com/download/e/a/d/eadb9b42-728b-42b0-bfdf-b472fa2a2464/Step_into_Liquid_1080.exe) (wmv-file in self-extracting archive exe-file).

My findings
Rev.2413-2734: Opens (DXVA), but won't play. Stays at 0:00.
Rev.2395: Opens (software), but won't play.
Rev.2364-2387: Crashes upon opening.
Rev.2280-2352: Opens, but wrong aspect ratio and distorted image.
Rev.xxxx-2264: Everything fine (except for occasional image distortion (http://www.ld-host.de/uploads/images/8c98e859e6dc9c344cc11e6b64518753.jpg), just like latest MPC-HC still now)

I have no problems with Step_into_Liquid_720.wmv though.

AMD Athlon XP 3200+ (so no SSE2)
ATI Radeon HD 3850 AGP
WinXP Pro SP3

[Aleksoid1978]

While I don't have any problems with MPC-HC, with MPC-BE I can't play certain WMV[WMV3+WMA9]-files, like Step_into_Liquid_1080.wmv (http://download.microsoft.com/download/e/a/d/eadb9b42-728b-42b0-bfdf-b472fa2a2464/Step_into_Liquid_1080.exe) (wmv-file in self-extracting archive exe-file).

My findings
Rev.2413-2734: Opens (DXVA), but won't play. Stays at 0:00.
Rev.2395: Opens (software), but won't play.
Rev.2364-2387: Crashes upon opening.
Rev.2280-2352: Opens, but wrong aspect ratio and distorted image.
Rev.xxxx-2264: Everything fine (except for occasional image distortion (http://www.ld-host.de/uploads/images/8c98e859e6dc9c344cc11e6b64518753.jpg), just like latest MPC-HC still now)

I have no problems with Step_into_Liquid_720.wmv though.

AMD Athlon XP 3200+ (so no SSE2)
ATI Radeon HD 3850 AGP
WinXP Pro SP3


Sorry - i do not have WinXP and can't test.

[wanezhiling]

Sorry - i do not have WinXP and can't test.

Even on win7/8, mpc-be/hc have dxva issue with that wmv on all GPUs.

I cut a small clip. http://www.sendspace.com/file/b5zpw2

[wanezhiling]

On XP, latest mpc-hc plays though has same dxva issue, while mpc-be just stays at 0:00. :)

Tested several dxva decoders on win7/8, its mpc ONLY issue. :)

[Aleksoid1978]

On XP, latest mpc-hc plays though has same dxva issue, while mpc-be just stays at 0:00. :)

Tested several dxva decoders on win7/8, its mpc ONLY issue. :)

Try this builds
http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_VC1_WMV_DXVA(1).7z

http://aleksoid.voserver.net/MPC-BE/mpc-be.exe_VC1_WMV_DXVA(2).7z

[wanezhiling]

dxva1 build on xp: no changes..

dxva2 build on 7/8: ok

[Aleksoid1978]

dxva1 build on xp: no changes..

dxva2 build on 7/8: ok

On WinXP - do not start and black screen ??

[wanezhiling]

right

[Aleksoid1978]

Well - no luck WinXP :)

[Aleksoid1978]

Please try on this build http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug.7z
In archive - Dbgview.exe. What need - first run Dbgview.exe, then mpc-be.exe and open file for playback. Close mpc-be.exe. And then - save log from Dbgview.exe and upload for me.

[wanezhiling]

Open that wmv file, mpc-be crashed...

well log file has been sent.

[Aleksoid1978]

Open that wmv file, mpc-be crashed...

well log file has been sent.

Another try - http://aleksoid.voserver.net/MPC-BE/DXVA_WMV_Debug_2.7z :)

[wanezhiling]

crash still

[Aleksoid1978]

crash still

You use VMR7 ?? If yes - try with another render.

[wanezhiling]

because i reset setting :p

try vmr9 overlay, no difference, crash as well.

[Aleksoid1978]

because i reset setting :p

try vmr9 overlay, no difference, crash as well.

In software decoding work ??