Media Player Classic - BE Win32/x64

[Klaus1189]

OK, I see. Do you know why MPC-BE displays 23.980 for the dash file?

[Dlget]

unable to load subtitle with xysub filter if subtitle is a external file.
If subtitle is embedded,it loads with xy subfilter properly.

[beter]

https://www.sendspace.com/file/yn9yfz

Almost all subtitles between 00:21 and 01:30 are shown later than they should be.

(using build 721)

VLC: normal
MPC-HC: normal
MPC-HC with Xysubfilter: normal
MPC-BE: has this problem
MPC-BE with XySubfilter: has this problem

[v0lt]

@beter
Check build 731.

MPC-BE 1.4.5 (build 731) beta - x86 (https://yadi.sk/d/CFdRYLniitcBG), x64 (https://yadi.sk/d/YdF-b5dhitcmA).

[beter]

@beter
Check build 731.

MPC-BE 1.4.5 (build 731) beta - x86 (https://yadi.sk/d/CFdRYLniitcBG), x64 (https://yadi.sk/d/YdF-b5dhitcmA).

I think it is fixed now.
Thanks:)

[ryrynz]

Be about time to release 1.4.5 now wouldn't it?

[Klaus1189]

Updated german Translation. I sent you a pm

Feature request: Delay timer like MPC-HC has it. I made a request there some time ago and they added it.
Reason: Every TV or monitor needs some seconds when switching from one refresh rate to another.
Please use also the delay when switching between D3D-fullscreen and window-mode. This is very important.
I think the time should be adjustable since the time the displays need is different from one to another.

[v0lt]

@Klaus1189
I do not understand what kind of delay in question.
Like madVR? There screen flashes after a few seconds switching to full screen. This will not happen, because bad idea.

[huhn]

a TV needs a long time to change refresh rates.

if you change the refresh rate from 60 hz to 23 hz the screen can be black for over a sec but audio is still played.

with other words there should be an option to delay playback when the refresh rate changed.

[Klaus1189]

Exactly. The feature they added for me is located here

If set to 0 it is like now, but for users like me this option is very important. No flashing :)

Note that I set it to 8 secs (!!) so the video starts after the OSD Info of my Samsung monitor and on my Samsung TV disappears.

[v0lt]

@Klaus1189
I do not see the picture.

I do not understand the problem. The settings (View->Otions->Video->Fullscreen) have a lot of options for all occasions.

[huhn]

but no option for that.

it's mostly for HTPC use anyway. users with an normal PC monitor normally doesn't need that.

[Klaus1189]

I made a short video with my mobile phone where you can see the feature in action.

https://drive.google.com/folderview?id=0B4y5u0gBKYqbZ1MybkNnU0xCdlk&usp=sharing

[Klaus1189]

Without the feature you don't see the complete video. In this example you don't see the beautiful back of Nicole.

BTW: My soundsystem doesn't sound so bad, it's the way my crappy Galaxy Note 4 picks up sound. And not happy with Android, next time iOS, but that's another story ...

[v0lt]

Ok. Now it is clear.

[Socket774]

Hello.
This is a latest mplayerc.ja.rc.txt.
It's based on [r748].
https://www.zeta-uploader.com/412159529

[djfred93]

I have a DVD where i can't see the menu, i just hear it. I can see it with VLC and Kodi. And i can't change the language and the subtitle with the right-click menu.

How can i do a sample for you ?

[v0lt]

@Socket774
Thanks. Added in r750.
See also View->Options->Fullscreen.

@djfred93
Navigate->Audio Language
Navigate->Audio Menu

[Socket774]

Hello.
This is a latest mplayerc.ja.rc.txt.
It's based on [r750].
https://www.zeta-uploader.com/2000808492

[Klaus1189]

I tested build 758:
It looks like refresh rate change works now.
But why do we need the checkbox marked in the picture?
-> If delay is set to 0 secs we don't need it and when the seconds are set, it is automatically on.
I did a reset on mpc-be and now I can't enable the checkbox marked in the picture. What do I have to do?


I found a bug: wrong resolution/refresh rate stored. I filmed with my mobile phone what's happening:
https://drive.google.com/file/d/0B4y5u0gBKYqbR29IeFVCb3pEUnc/view?usp=sharing

[Klaus1189]

Server error. Try this:
https://drive.google.com/folderview?id=0B4y5u0gBKYqbdjZuaF80dWVhcEE&usp=sharing

[Aleksoid1978]

I found a bug: wrong resolution/refresh rate stored.

Try change last resolution again. then apply and close mpc-be.

[Klaus1189]

Yes I know that. but IMAHO it should be fixed. It doesn't look good, it's an ugly bug:
https://drive.google.com/file/d/0B4y5u0gBKYqbY3RQM1UtTVE4RUU/view?usp=sharing

If I play a video with D3D-mode and press for example o for options on the keyboard, it is opened but it can't be displayed because D3D-mode doesn't support that, so I think we should disable such keyboard shortcuts which don't work while D3D-mode is being used, because if a button on the keyboard is pressed without you know that, you can't close MPC-BE like I reported that with o for options while D3D-mode is used.

[Klaus1189]

There are two ways to add MPC-BE to context menu:

(1) In options/formats you can add MPC-BE to context menu (two entries: Play and add to playlist) which is very useful, but I think we should add the icon of MPC-BE to the context menu entries. These look a bit empty. -> explorer context.png

(2) While Installation the user can install another context menu entry which should be removed because it is obsolete -> It's already in MPC-BE integrated -> (1).
We should remove this obsolete thing from the installer. -> installer.png


Do we really need the association entries in the installer? Every user must set up MPC-BE for his/her needs and can enable file association in options. I think these are also obsolete.

It will look better :)

[beter]

Update for language files of Chinese(Traditional/Simplified) and Dutch.

https://www.sendspace.com/file/6ocg5g

[Aleksoid1978]

If you select while install "Install the shell extension" - then you'll get similar menu items in explorer.
http://s012.radikal.ru/i320/1509/f4/c035a6c0280at.jpg (http://radikal.ru/fp/9b269e78e10e4476a081dcb5a577592d)

[Klaus1189]

If you select while install "Install the shell extension" - then you'll get similar menu items in explorer.
http://s012.radikal.ru/i320/1509/f4/c035a6c0280at.jpg (http://radikal.ru/fp/9b269e78e10e4476a081dcb5a577592d)

There are two ways to add MPC-BE to context menu:

(1) In options/formats you can add MPC-BE to context menu (two entries: Play and add to playlist) which is very useful, but I think we should add the icon of MPC-BE to the context menu entries. These look a bit empty. -> explorer context.png

(2) While Installation the user can install another context menu entry which should be removed because it is obsolete -> It's already in MPC-BE integrated -> (1).
We should remove this obsolete thing from the installer. -> installer.png


Do we really need the association entries in the installer? Every user must set up MPC-BE for his/her needs and can enable file association in options. I think these are also obsolete.

It will look better :)


This one is the obsolete one. Icons which doesn't represent MPC-BE and hard to remove if the user wants to disable this. The integrated ones -> (1) can be disabled and are fine.
Please remove it from the installer. No need for it.

[Klaus1189]

Yes I know that. but IMAHO it should be fixed. It doesn't look good, it's an ugly bug:
https://drive.google.com/file/d/0B4y5u0gBKYqbY3RQM1UtTVE4RUU/view?usp=sharing

If I play a video with D3D-mode and press for example o for options on the keyboard, it is opened but it can't be displayed because D3D-mode doesn't support that, so I think we should disable such keyboard shortcuts which don't work while D3D-mode is being used, because if a button on the keyboard is pressed without you know that, you can't close MPC-BE like I reported that with o for options while D3D-mode is used.

MPC-HC is fine

BTW the bug is even more ugly if you think about it. You must select it because it only looks like it is already set up to play these framerates at 60.000p

[v0lt]

Update for language files of Chinese(Traditional/Simplified) and Dutch.
Thanks. Added in 764.

[videonerd]

Hi developers... just like there is an option to adjust seek variables, may I request an option to adjust playrate variables as well? Some users like that watch lots of esports prefer to use playrate instead of seek.

Thank you!

[v0lt]

videonerd
Ctrl+Up/Down
There are so accepted, ask what the answer is found in 2 minutes?

[videonerd]

hi v0lt - I know that you can change playrate, what I mean is change the playrate variable e.g. i prefer 0.25x, 0.5x, 1x, 2x, 4x instead of the current preset, and someone else prefers different variables. Similar to how you can change the seek e.g. some prefer 5 seconds, some prefer 10 seconds so my request was whether we can change the playrate variable please thank you!

[v0lt]

videonerd
View->Options->Playback->Speed step.
Custom set of rates is not provided.

[Klaus1189]

updated german translation -> pm :)

[Klaus1189]

Can you please increase the size of a dropdown list?
the last letter is cut off

Thank you

[v0lt]

Can you please increase the size of a dropdown list?
the last letter is cut off
The picture is not visible. Tell me what kind of a dropdown list does not fully visible.

[Klaus1189]

options -> playback -> when opening an audiofile, dropdownlist

[videonerd]

videonerd
View->Options->Playback->Speed step.
Custom set of rates is not provided.

Thank you. That's too bad then. The logic in that option is not good e.g. either 'auto' or absolute multipliers. Hope you reconsider custom rate setting, even if just in registry or ini.

Thank you again.

[vood007]

possible bug: When switching settings store location from registry to ini file mpc-be forgets the settings of MPC Audio Renderer (Wasapi Shared / Excl.)

[v0lt]

possible bug: When switching settings store location from registry to ini file mpc-be forgets the settings of MPC Audio Renderer (Wasapi Shared / Excl.)Agree. It looks like a problem with all the built-in filters.

[rack04]

Did something change in the way that MPC-BE exits ISO files between MPC-BE.1.4.5.587.x64 and MPC-BE.1.4.5.677.x64 because when I exit it closes and hangs my ISO mount.

[Aleksoid1978]

Did something change in the way that MPC-BE exits ISO files between MPC-BE.1.4.5.587.x64 and MPC-BE.1.4.5.677.x64 because when I exit it closes and hangs my ISO mount.

Do you try latest SVN builds (http://mpc-be.org/builds/) ??

[rack04]

Do you try latest SVN builds (http://mpc-be.org/builds/) ??

Sorry I did not know that build link existed. MPC-BE.1.4.5.781.x64 works fine. Thanks.

[v0lt]

Media Player Classic - BE 1.4.5 (build 787) Win32 (stable release):
Media Player Classic - BE 1.4.5 x86 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.4.5/MPC-BE.1.4.5.x86-installer.zip/download)
Media Player Classic - BE 1.4.5 x86 (without installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.4.5/MPC-BE.1.4.5.x86.7z/download)
Standalone Filters Media Player Classic - BE 1.4.5 x86 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Win32/MPC-BE%20Win32%201.4.5/standalone_filters-mpc-be.1.4.5.x86.7z/download)

Media Player Classic - BE 1.4.5 (build 787) x64 (stable release):
Media Player Classic - BE 1.4.5 x64 (with installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.4.5/MPC-BE.1.4.5.x64-installer.zip/download)
Media Player Classic - BE 1.4.5 x64 (without installer) (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.4.5/MPC-BE.1.4.5.x64.7z/download)
Standalone Filters Media Player Classic - BE 1.4.5 x64 (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20x64/MPC-BE%20x64%201.4.5/standalone_filters-mpc-be.1.4.5.x64.7z/download)

Source Code:
Media Player Classic - BE 1.4.5 Source Code (http://sourceforge.net/projects/mpcbe/files/MPC-BE/MPC-BE%20Source%20Code/MPC-BE%201.4.5%20Source%20Code/MPC-BE%201.4.5%20Source%20Code.7z/download)

------------------------------------------
Beta versions 1.4.6.x:
Nightly Builds (http://sourceforge.net/projects/mpcbe/files/MPC-BE/Nightly%20Builds%20%28from%20svn%20trunk%29/), Source code (http://sourceforge.net/p/mpcbe/code/HEAD/tree/), Change log (http://sourceforge.net/p/mpcbe/code/HEAD/log/?path=/trunk)

[Siso]

A quick question regarding the audio stream switcher, I noticed it had an option to be disabled, and since some time it is enabled by default and can't be disabled. Could you give me some useful information about it?

[v0lt]

Audio Switcher can not be disabled.

[DzigiBau]

I have the same question like regular MPC-HC, since behaviour is the same. I cannot play mkv files and HEVC files, with default settings and custom external LAV filters and splitters as well.

What I have found with some older MPC-HC 1.5.3.3725 (sorry for wrong threat but situation is completely the same) when turn on Audio Built-In switcher everything starts working well, I can play whatever file format. If I turned it off I cannot play mkv and HEVC files.

Could you see what s a problem and possbile make some fix.

My specs:

AMD 955 CPU
AMD R9 290 card
Creative Audigy sound card.
4Gb RAM

[Siso]

Audio Switcher can not be disabled.

I'm aware of that, but what is it's actual benefit and purpose?

[v0lt]

@Siso
It is required for correct work of the player.

[Siso]

@Siso
It is required for correct work of the player.

Thank you for the information :)