Auto Gordian Knot: current version 2.55

[len0x]

Originally posted by phoenix03
Hi Len0x,
The exact size is 741094 Ko


What is it in bytes?

Thanks for d2v files - I'll have a look and see if I can spot anything unusual.

[phoenix03]

Hi len0x,
Size is again 723 Mo (758 880 256 octets) - 741094 Ko

I've attached the log.

[phoenix03]

...and here's the d2v...

[len0x]

Lots of minor fixes and improvements. Still trying to nail down oversize problem that I cannot reproduce...

[phoenix03]

Hi len0x,
here are the log files.
Good Night!

[len0x]

Looking at both logs I can see that comp test percentage in old version is below 66.67% which means that max quantizer 4 is used while new one above 66.67% and therefore quantizer 3 is used. Oversize should not happen theoretically, but if XviD has some kind of rate control problem then it might be the cause (but its still very rare problem).

[Exoskeletor]

Len0x i have a problem. i have rip an x-files episode and i have try to make it avi with subtitles.look the log.

[24/2/2005 7:02:46 ðì] AutoGK 1.92b
[24/2/2005 7:02:46 ðì] OS: WinXP (5.1.2600).2
[24/2/2005 7:02:46 ðì] Job started.
[24/2/2005 7:02:46 ðì] Input dir: C:\X-Files Season 1\Episode 2
[24/2/2005 7:02:46 ðì] Output file: C:\X-Files Season 1\Episode 2\episode2.avi
[24/2/2005 7:02:46 ðì] Audio: English
[24/2/2005 7:02:46 ðì] Subtitles: Greek : Normal
[24/2/2005 7:02:46 ðì] Codec: XviD
[24/2/2005 7:02:46 ðì] Target size: 500Mb
[24/2/2005 7:02:46 ðì] Started encoding.
[24/2/2005 7:02:46 ðì] Demuxing and indexing.
[24/2/2005 7:03:32 ðì] Processing file: C:\X-Files Season 1\Episode 2\VTS_01_1.VOB
[24/2/2005 7:03:32 ðì] Processing file: C:\X-Files Season 1\Episode 2\VTS_01_2.VOB
[24/2/2005 7:03:32 ðì] Source aspect ratio: 4:3
[24/2/2005 7:03:32 ðì] Source resolution: 720x576
[24/2/2005 7:03:32 ðì] Found PAL source.
[24/2/2005 7:03:32 ðì] Analyzing source.
[24/2/2005 7:05:44 ðì] Source has percentage of interlacing in motion areas: 44,12
[24/2/2005 7:05:44 ðì] Source is considered to be interlaced.
[24/2/2005 7:05:44 ðì] Output will contain 65927 frames
[24/2/2005 7:05:44 ðì] Decoding audio.
[24/2/2005 7:06:35 ðì] Normalizing audio.
[24/2/2005 7:07:21 ðì] Encoding audio.
[24/2/2005 7:10:32 ðì] Preparing subtitles.

Unfortunately, in the end i have an avi without subtitles. i have rip the dvd with dvd decrypter. when i click on the preview, i can't see the subtitles also(i can't ever hear anything but in the final avi i have the correct sound)

If i open the ifo with subrip i have the subtitles. What do you think that i can do?

[bourtzovlakas]

Did you use stream processing in DVD Decrypter?
Did you de-select any subtitle stream?

[Exoskeletor]

no. anything its here.i have rip the dvd in ifo mode without stream processing enabled. see the streraming information

0x20 - Subtitle - Nederlands - [SubPicture 01: Normal] / LBA: 1058232 / PTS: 00:00:03.133 / Delay: 3000ms
0x21 - Subtitle - English - [SubPicture 02: Normal] / LBA: 1060140 / PTS: 00:00:07.773 / Delay: 7640ms
0x22 - Subtitle - Français - [SubPicture 03: Normal] / LBA: 1058208 / PTS: 00:00:03.093 / Delay: 2960ms
0x23 - Subtitle - Greek - [SubPicture 04: Normal] / LBA: 1060136 / PTS: 00:00:07.773 / Delay: 7640ms
0x80 - Audio - AC3 / 2ch / 48kHz / DRC / English / LBA: 1057557 / PTS: 00:00:00.053 / Delay: -80ms
0x81 - Audio - AC3 / 2ch / 48kHz / DRC / Français / LBA: 1057556 / PTS: 00:00:00.053 / Delay: -80ms
0xE0 - Video - MPEG-2 / 720x576 (PAL) / 4:3 / LBA: 1057550 / PTS: 00:00:00.133 / Delay: 0ms

[bourtzovlakas]

Try with another subtitle stream in preview, to see if the other streams are displayed correctly....

[alfa156]

when i try to download the 1.92 i get a message "password required". Why is that?

thank you

[len0x]

FAQ Q 0

[alfa156]

forgive me.

it was download accelerator that messed up.

Thank you

[Chaser]

everything is explained by the two screenshots!

Here the log:
[25.02.2005 20:39:35] AutoGK 1.92b
[25.02.2005 20:39:35] OS: WinXP (5.1.2600).2
[25.02.2005 20:39:35] Job started.
[25.02.2005 20:39:35] Input dir: G:\Multimedia\Video\Serien\Stargate\F03
[25.02.2005 20:39:35] Output file: G:\Multimedia\Video\Serien\Stargate\03.avi
[25.02.2005 20:39:35] Audio: Deutsch
[25.02.2005 20:39:35] Audio2: English
[25.02.2005 20:39:35] Subtitles: none
[25.02.2005 20:39:35] Codec: DivX
[25.02.2005 20:39:35] Target size: 233Mb
[25.02.2005 20:39:35] Custom audio settings: VBR MP3 with average bitrate: 96Kbps
[25.02.2005 20:39:35] Started encoding.
[25.02.2005 20:39:35] Demuxing and indexing.
[25.02.2005 20:41:13] Processing file: G:\Multimedia\Video\Serien\Stargate\F03\VTS_03_PGC_01_1.VOB
[25.02.2005 20:41:13] Processing file: G:\Multimedia\Video\Serien\Stargate\F03\VTS_03_PGC_01_2.VOB
[25.02.2005 20:41:13] Source aspect ratio: 16:9
[25.02.2005 20:41:13] Source resolution: 720x576
[25.02.2005 20:41:13] Found PAL source.
[25.02.2005 20:41:13] Analyzing source.
[25.02.2005 20:43:49] Source has percentage of interlacing in motion areas: 1,60
[25.02.2005 20:43:49] Source is considered to be progressive.
[25.02.2005 20:43:49] Output will contain 63637 frames
[25.02.2005 20:43:49] Decoding audio.
[25.02.2005 20:44:46] Normalizing audio.
[25.02.2005 20:45:02] Encoding audio.
[25.02.2005 20:50:09] Decoding audio.
[25.02.2005 20:51:50] Normalizing audio.
[25.02.2005 20:52:28] Encoding audio.
[25.02.2005 20:57:32] Audio size: 31,486,877 bytes (30.03 Mb)
[25.02.2005 20:57:32] Audio 2 size: 31,261,374 bytes (29.81 Mb)
[25.02.2005 20:57:32] Overhead: 6,653,184 bytes (6.34 Mb)
[25.02.2005 20:57:32] Video size: 174,916,773 bytes (166.81 Mb)
[25.02.2005 20:57:32] Target bitrate is: 550kbps
[25.02.2005 20:57:32] Running compressibility test.
[25.02.2005 20:57:32] Writing the following script to G:\Multimedia\Video\Serien\Stargate\agk_tmp\03_comptest.avs
===========================================================
LoadPlugin("C:\PROGRA~1\AutoGK\DGMPGDec\DGDecode.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\autocrop.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\RemoveGrain.dll")

movie = mpeg2source("G:\Multimedia\Video\Serien\Stargate\agk_tmp\03.d2v")
cropclip = autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=10,aspect=0,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
fixed_aspect = 1.42222222222222
c_width = width(cropclip)
c_height = round(height(cropclip) / fixed_aspect)
input_par = float(c_width)/float(c_height)
input_par = input_par > 1.4 ? input_par : (4.0/3.0)
out_width = 640
out_height = round(float(out_width) / input_par)
hmod = out_height - (floor(out_height / 16 ) * 16)
out_height = (hmod > 4) ? (out_height + (16 - hmod)) : (out_height - hmod)
new_aspect = (float(out_width) / float(out_height)) / fixed_aspect
autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=10,aspect=new_aspect,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
LanczosResize(out_width,out_height)
RemoveGrain(mode=2)
SelectRangeEvery(280,14)
===========================================================
[25.02.2005 21:01:35] Duration was: 4 minutes 1 second.
[25.02.2005 21:01:35] Speed was: 13,16 fps.
[25.02.2005 21:01:35] Compressibility percentage is: 32,01
[25.02.2005 21:01:35] Using softer resizer.
[25.02.2005 21:01:35] Chosen resolution is: 480x272 ( AR: 1,76 )
[25.02.2005 21:01:35] Predicted comptest value is: 61,95
[25.02.2005 21:01:35] Running first pass.
[25.02.2005 21:01:35] Writing the following script to G:\Multimedia\Video\Serien\Stargate\agk_tmp\03_movie.avs
===========================================================
LoadPlugin("C:\PROGRA~1\AutoGK\DGMPGDec\DGDecode.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\autocrop.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\RemoveGrain.dll")

movie = mpeg2source("G:\Multimedia\Video\Serien\Stargate\agk_tmp\03.d2v")
cropclip = autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=10,aspect=0,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
fixed_aspect = 1.42222222222222
c_width = width(cropclip)
c_height = round(height(cropclip) / fixed_aspect)
input_par = float(c_width)/float(c_height)
input_par = input_par > 1.4 ? input_par : (4.0/3.0)
out_width = 480
out_height = round(float(out_width) / input_par)
hmod = out_height - (floor(out_height / 16 ) * 16)
out_height = (hmod > 4) ? (out_height + (16 - hmod)) : (out_height - hmod)
new_aspect = (float(out_width) / float(out_height)) / fixed_aspect
autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=10,aspect=new_aspect,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
BicubicResize(out_width,out_height,0,0.5)
RemoveGrain(mode=2)
===========================================================
[25.02.2005 21:19:43] Duration was: 18 minutes 7 seconds
[25.02.2005 21:19:43] Speed was: 58,50 fps.
[25.02.2005 21:19:43] Warning! Found different number of frames: 30310
[25.02.2005 21:19:43] Audio size: 31,486,877 bytes (30.03 Mb)
[25.02.2005 21:19:43] Audio 2 size: 31,261,374 bytes (29.81 Mb)
[25.02.2005 21:19:43] Overhead: 3,170,432 bytes (3.02 Mb)
[25.02.2005 21:19:43] Video size: 178,399,525 bytes (170.14 Mb)
[25.02.2005 21:19:43] Target bitrate is: 1177kbps
[25.02.2005 21:19:43] Running second pass.
[25.02.2005 21:23:44] Duration was: 4 minutes 0 seconds
[25.02.2005 21:23:44] Speed was: 125,85 fps.
[25.02.2005 21:23:44] Job finished. Total time: 44 minutes 8 seconds

[Chaser]

snd picture

[len0x]

Originally posted by Chaser
everything is explained by the two screenshots!


Not really. Search in the forum can help (I saw that error before somewhere). Nothing to do with AutoGK though.

[Exoskeletor]

bourtzovlaka the preview doesn't show subtitles no matter what language i select. can you understand why this is happening? i can't make the avi with built in subtitles. (if the subtitles have some errors then the subrip why is working ok with them?)

[Chaser]

hm
search doesn't work here. of course it is an error from vdubmod - but why?

[digidragon]

Originally posted by Chaser
...of course it is an error from vdubmod - but why?

I had the same error and the GTCODEC.DLL codec was the problem. I unregistered and renamed it, and the error was no more.

Apparently the GTCODEC codec is very badly-behaved and tries to decode formats which it's not designed to decode.

[len0x]

Originally posted by Exoskeletor
the preview doesn't show subtitles no matter what language i select.

:readfaq: Q 3.4

[Exoskeletor]

i have rip all the x files episode with the same way.only in episode 2 this is happening.

[len0x]

If you're not following the correct procedure I will not give any support to you.

[Exoskeletor]

i have rip the dvd in ifo mode without changing anything...how do you know that i haven't follow the correct procedure?

[len0x]

Because your vob files do not contain PGC information in them! Without it you won't be able to see any subs from any PGCs apart from the first one (did you read Q 3.4?).

[Exoskeletor]

yes i read it but how is this possible to happen? i have rip all the dvd's in the same way.
(i have notice that only the first episode has 2 extra files,VTS_01_1.srm and VTS_01_2.srm. does this matter?)

[len0x]

That is where my support stops - I'm not concerned about how it was working if you didn't follow the guide. I only care that certain procedure works. So please report back if you have this problem after you ripped DVD properly.

[Exoskeletor]

ah i see. pgc and angel number. you just have to say read the tutorial :). im sorry.
why autogk can't understand that i have rip the dvd and display a message? this would be nice

[len0x]

Whoever has SSE3 capable cpu please test if its detected properly and denosing is working OK on such systems. This version should be stress tested as its what I plan to release as a stable version.

[Chaser]

Originally posted by len0x
Whoever has SSE3 capable cpu please test if its detected properly and denosing is working OK on such systems. This version should be stress tested as its what I plan to release as a stable version.

Are the SSE3commands then used in VDubMod or rather for encoding audio?

[len0x]

Only one component in AutoGK package is using SSE3 - RemoveGrain avisynth filter. Nothing else as far as I know is able to take advantage of that.

[Exoskeletor]

im testing it now with amd64 3,5.
Len0x i can't understand on the select output size window, when we click to choose the number of the cd's, why we have to scroll up or down to see one more option. can you make this box larger?

[len0x]

Originally posted by Exoskeletor
can you make this box larger?

Yes, I can.

[Exoskeletor]

Here is the log file.As i say i have AMD64 @ 3,5ghz.From the previous log i have seen the the autogk has use removegain.dll but now has use removegainsse2/dll.
In the previous job (with Target size: 500Mb) the duration was
[24/2/2005 8:54:23 ðì] Job finished. Total time: 1 hour, 51 minutes 37 seconds
Now it is(with Target size: 700Mb):
[28/2/2005 8:32:46 ìì] Job finished. Total time: 1 hour, 39 minutes 41 seconds

Well Done Len0x

(Although i have select 1 cd size, the final size is 798mb)

[28/2/2005 6:53:05 ìì] AutoGK 1.93b
[28/2/2005 6:53:05 ìì] OS: WinXP (5.1.2600).2
[28/2/2005 6:53:05 ìì] Job started.
[28/2/2005 6:53:05 ìì] Input dir: C:\X-Files Season 1\Episode 2
[28/2/2005 6:53:05 ìì] Output file: C:\X-Files Season 1\Episode 2\egyj.avi
[28/2/2005 6:53:05 ìì] Audio: English
[28/2/2005 6:53:05 ìì] Subtitles: none
[28/2/2005 6:53:05 ìì] Codec: XviD
[28/2/2005 6:53:05 ìì] Target size: 700Mb
[28/2/2005 6:53:05 ìì] Started encoding.
[28/2/2005 6:53:05 ìì] Demuxing and indexing.
[28/2/2005 6:53:48 ìì] Processing file: C:\X-Files Season 1\Episode 2\VTS_01_1.VOB
[28/2/2005 6:53:48 ìì] Processing file: C:\X-Files Season 1\Episode 2\VTS_01_2.VOB
[28/2/2005 6:53:48 ìì] Source aspect ratio: 4:3
[28/2/2005 6:53:48 ìì] Source resolution: 720x576
[28/2/2005 6:53:48 ìì] Found PAL source.
[28/2/2005 6:53:48 ìì] Analyzing source.
[28/2/2005 6:55:59 ìì] Source has percentage of interlacing in motion areas: 44,12
[28/2/2005 6:55:59 ìì] Source is considered to be interlaced.
[28/2/2005 6:55:59 ìì] Output will contain 65927 frames
[28/2/2005 6:55:59 ìì] Decoding audio.
[28/2/2005 6:56:53 ìì] Normalizing audio.
[28/2/2005 6:57:28 ìì] Encoding audio.
[28/2/2005 7:00:36 ìì] Audio size: 42,093,840 bytes (40.14 Mb)
[28/2/2005 7:00:36 ìì] Overhead: 2,637,056 bytes (2.51 Mb)
[28/2/2005 7:00:36 ìì] Video size: 689,272,304 bytes (657.34 Mb)
[28/2/2005 7:00:36 ìì] Running compressibility test.
[28/2/2005 7:00:36 ìì] Writing the following script to C:\X-Files Season 1\Episode 2\agk_tmp\egyj_comptest.avs
===========================================================
LoadPlugin("C:\PROGRA~1\AutoGK\DGMPGDec\DGDecode.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\autocrop.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\RemoveGrainSSE2.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\kerneldeint.dll")

movie = mpeg2source("C:\X-Files Season 1\Episode 2\agk_tmp\egyj.d2v")
cropclip = autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=10,aspect=0,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
fixed_aspect = 1.06666666666667
c_width = width(cropclip)
c_height = round(height(cropclip) / fixed_aspect)
input_par = float(c_width)/float(c_height)
input_par = input_par > 1.4 ? input_par : (4.0/3.0)
out_width = 640
out_height = round(float(out_width) / input_par)
hmod = out_height - (floor(out_height / 16 ) * 16)
out_height = (hmod > 4) ? (out_height + (16 - hmod)) : (out_height - hmod)
new_aspect = (float(out_width) / float(out_height)) / fixed_aspect
KernelDeInt(movie,order=1,sharp=true)
autocrop(mode=0,wmultof=4,hmultof=4,samples=10,aspect=new_aspect,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
LanczosResize(out_width,out_height)
RemoveGrain(mode=2)
SelectRangeEvery(300,15)
===========================================================
[28/2/2005 7:04:25 ìì] Duration was: 3 minutes 48 seconds
[28/2/2005 7:04:25 ìì] Speed was: 14,41 fps.
[28/2/2005 7:04:25 ìì] Compressibility percentage is: 103,76
[28/2/2005 7:04:25 ìì] Chosen resolution is: 720x544 ( AR: 1,32 )
[28/2/2005 7:04:25 ìì] Predicted comptest value is: 81,38
[28/2/2005 7:04:25 ìì] Running first pass.
[28/2/2005 7:04:25 ìì] Writing the following script to C:\X-Files Season 1\Episode 2\agk_tmp\egyj_movie.avs
===========================================================
LoadPlugin("C:\PROGRA~1\AutoGK\DGMPGDec\DGDecode.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\autocrop.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\RemoveGrainSSE2.dll")
LoadPlugin("C:\PROGRA~1\AutoGK\filters\kerneldeint.dll")

movie = mpeg2source("C:\X-Files Season 1\Episode 2\agk_tmp\egyj.d2v")
cropclip = autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=10,aspect=0,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
fixed_aspect = 1.06666666666667
c_width = width(cropclip)
c_height = round(height(cropclip) / fixed_aspect)
input_par = float(c_width)/float(c_height)
input_par = input_par > 1.4 ? input_par : (4.0/3.0)
out_width = 720
out_height = round(float(out_width) / input_par)
hmod = out_height - (floor(out_height / 16 ) * 16)
out_height = (hmod > 4) ? (out_height + (16 - hmod)) : (out_height - hmod)
new_aspect = (float(out_width) / float(out_height)) / fixed_aspect
KernelDeInt(movie,order=1,sharp=true)
autocrop(mode=0,wmultof=4,hmultof=4,samples=10,aspect=new_aspect,threshold=34,samplestartframe=0,leftadd=0,rightadd=0,topadd=0,bottomadd=0)
LanczosResize(out_width,out_height)
RemoveGrain(mode=2)
===========================================================
[28/2/2005 8:32:40 ìì] Duration was: 1 hour, 28 minutes 14 seconds
[28/2/2005 8:32:40 ìì] Speed was: 12,45 fps.
[28/2/2005 8:32:40 ìì] Expected quality of first pass size: 82,52
[28/2/2005 8:32:40 ìì] Running second pass.
[28/2/2005 8:32:46 ìì] Duration was: 5 seconds
[28/2/2005 8:32:46 ìì] Speed was: 11497,56 fps.
[28/2/2005 8:32:46 ìì] Job finished. Total time: 1 hour, 39 minutes 41 seconds

[len0x]

As far as I can see second pass didn't run at all and you left with just first pass file! (speedup cannot be that huge just because of SSE2 denoising).

[Exoskeletor]

??? you are write. i haven't notice that. i don't remember to stop the second pass. i was doing a lot of job when i was making this avi. guess i have stop it and i didnt realise it.

[Exoskeletor]

can you make autogk when we select the input directory, automaticly select the "folder_name".avi as output file name? (and if it is exist as "folder_name"1.avi etc). and if we dont like it we still can press the button too change the name.

Or at least if you dont like it, when we click on the output directory folder, make the program to write automaticly the name of the input direcory(in the input box that appears) and to be highlited.(in order if someone dont like it to start immediately writing)

[len0x]

Originally posted by Exoskeletor
can you make autogk when we select the input directory, automaticly select the "folder_name".avi as output file name? (and if it is exist as "folder_name"1.avi etc). and if we dont like it we still can press the button too change the name.


That was actually discussed many times. And I wasn't against it, but some ppl said they would like naming to be first directory in the path and not the last. So nothing was done about it in the end.

Originally posted by Exoskeletor
Or at least if you dont like it, when we click on the output directory folder, make the program to write automaticly the name of the input direcory(in the input box that appears) and to be highlited.(in order if someone dont like it to start immediately writing)

That's a good idea.

[Exoskeletor]

i want to make another suggestion (i dont know if it is good one, but i though that you should listen it). what about making some keyboard shortcuts with our favour settings?
I mean, when we click on the shift+F1 automaticly the output size,codec,audio format,input directory (if exist), audio language (if exist) etc will be selected with the previous settings that we have enter in the shift+F1 shortcut.

[len0x]

Sounds more like a profile, not a shortcut.

[Exoskeletor]

yeah something like that. do you like it?

[len0x]

I do, but its not something that would be high on my priority list atm.

[Chaser]

Do you plan to show us your To-Do-list sometime in the future?

[len0x]

Sort of - I'll announce what's gonna be done within next development cycle after stable release is out.

[Exoskeletor]

ok. we are awaiting release. if you plan to translate autogk in greek im here :)

[Chaser]

A translation of AGK isn't planned, i think - according to this thread (http://forum.doom9.org/showthread.php?s=&threadid=90476) first of all the tutorial ist translated (someone already wants to do the greek one - no name mentioned there however - perhaps it's you ;) ).

[Mc|Atm0s]

Can AutoGK support Fraunhofer IIS mp3surround (demoware) in future? :rolleyes:

[whiskey]

Why AutoGK does not suppor such features in both divx and xvid like
1.Global Motion Compensation
2.Quarter pixel motion estimation

An second question.. is there any way to add logo into video via autoGK or virtualdub ??? (thanks for answers and greetz 4 ALL):p

[len0x]

Originally posted by Mc|Atm0s
Can AutoGK support Fraunhofer IIS mp3surround (demoware) in future? :rolleyes:

unlikely.

[len0x]

Originally posted by whiskey
Why AutoGK does not suppor such features in both divx and xvid like
1.Global Motion Compensation
2.Quarter pixel motion estimation


They are not standalone compatible.

Originally posted by whiskey
An second question.. is there any way to add logo into video via autoGK or virtualdub ???

Only via manual SSA subs.

[Stebs]

Since the Thread here is slow atm, I allow myself to ask a few questions about the future of AutoGK:

Lenox, do you plan to work on x264(AVC) + AAC for AutoGK in the future? (naturally after a stable version - btw. how is the stable version going?)

As you surely know AVC + AAC will be THE Codecs in the future as HDTV will mostly use those and some standalones already start to be compatible, for example the newest Players from Xoro - they call it Nero Digital until now, but it should be compatible to standard AVC (like x254) or not?

x264 should be no great Problem as you made GordianKnot already compatible with it, but what about AAC and mp4 Container?

Keep up the good work!