MeGUI: bug reports and feature requests

[LigH]

There was just a discussion about a differently named init routine (http://forum.doom9.org/showthread.php?p=1660265#post1660265), maybe that's related?

[mini-moose]

I pre-make AVS files with crop/resize and then load them in One Click Encoder. OCE is configured to "Keep Input Resolution (disable crop and resize)" and "Auto Crop" + "Anamorphic Output" disabled.

The import AVS created by OCE still adds global "MeGUI_darx/y" values. Any reason that's necessary ?


My concern with this is that if I don't use the --sar 1:1 switch in x264, avinaptic (depending on the AR) reports something like:
Aspect ratio: Custom pixel shape (34104:34105 = 0.999971). with --sar 1:1 it would be Square Pixels.

and mediainfo reports:
Display aspect ratio : 16:9
Original display aspect ratio : 16:9

the mediainfo double DAR report also happens with --sar 1:1 sometimes. I think it might have something to do with mod2.
For example I get it with if I use 718x404 but not with 716x404. I guess this isn't much of a concern but the custom pixel shape is somewhat.

[Zathor]

mini-mosse, I have to check that. Can you upload a log?

[kalehrl]

It seems x246 profiles have been re-introduced in MeGUI.

[Zathor]

:confused:

[kalehrl]

The x264 encoding profiles, which were present earlier and then dropped in favour of built-in x264 presets, have reappeared:

http://i39.tinypic.com/o7ooeg.png

[mini-moose]

mini-mosse, I have to check that. Can you upload a log?

2 logs attached (renamed the extension to .txt cause .log wasn't getting accepted).
one with sar in x264, one without. added the relevant parts from avinaptic/mediainfo at the end of the logs.

[Zathor]

kalehrl: no x264 profiles are beeing pushed out. Maybe you had those profiles still cached in your update_cache folder? You should avoid to use them.

mini-moose: thanks for the logs. no time yet to check them, because

2449 [Update] show the lsmash package in the updater
2448 [LSMASH Indexer] added LSMASHVideoSource/LWLibavVideoSource support
as no indexer is available no progress during "indexing" is available
also the cache file must be created in the same directory as the source file
[Audio Encoder] added LSMASHAudioSource/LWLibavAudioSource support
2447 [Update] fixed a regression in 2446
2446 [Update] removed "Platform" column
added "Last Used" column
sort based on first column
internal optimizations

Please test the LSMASH stuff. I have tested several files but for sure have not tested everything. Especially the audio part got little attention and I also could not check yet if it is required to add AssumeFPS() to the video decoders.

[TSoft]

@Zathor

One click encoder doesn't delete intermediate files even if "Delete intermediate files" was checked

[Zathor]

Please post your log file.

[TSoft]

I tried to encode with One Click Encoder again to reproduce the error, but now "One Click Encoder" doesn't work:

[Information] Log
-[Information] Versions
--[Information] [02/01/2014 22:25:29] MeGUI: 2449
--[Information] [02/01/2014 22:25:29] Operating System: Windows 7 x64 SP1 (6.1.65536.7601)
--[Information] [02/01/2014 22:25:29] .Net Framework: 4.0 (4.0.30319)
--[Information] [02/01/2014 22:25:29] AviSynth: 2.5.8.5 (21-12-2008)
--[Information] [02/01/2014 22:25:29] AvisynthWrapper: (02-01-2009)
--[Information] [02/01/2014 22:25:29] Haali Matroska Splitter: 1.13.138.14 (14-04-2013)
--[Information] [02/01/2014 22:25:29] Haali DSS2: (14-04-2013)
--[Information] [02/01/2014 22:25:29] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
--[Information] [02/01/2014 22:25:29] LinqBridge: 1.0.0.0 (27-05-2009)
--[Information] [02/01/2014 22:25:29] MediaInfo: 0.7.65.0 (21-11-2013)
--[Information] [02/01/2014 22:25:29] MediaInfoWrapper: 0.7.61.0 (06-01-2013)
--[Information] [02/01/2014 22:25:29] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
--[Information] [02/01/2014 22:25:29] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
--[Information] [02/01/2014 22:25:29] 7z: 9.20 (18-11-2010)
-[Information] Update detection
--[Information] [02/01/2014 22:25:29] Connecting to server: http://megui.org/auto/
--[Information] [02/01/2014 22:25:29] All files are up to date
-[Information] OneClick
--[Information] [02/01/2014 22:26:27] MediaInfo
---[Information] File: C:\Users\root\Desktop\RIP\video1.avi
---[Information] General
----[Information] Format: AVI
----[Information] FormatString: AVI
----[Information] FileSize: 1607043072
----[Information] PlayTime: 01:54:03.680
---[Information] Video
----[Information] ID: 0
----[Information] StreamOrder: 0
----[Information] Width: 624
----[Information] Height: 352
----[Information] FrameCount: 171092
----[Information] FrameRate: 25.000
----[Information] FrameRateOriginal:
----[Information] FrameRateMode:
----[Information] ScanType: Progressive
----[Information] Codec: XVID
----[Information] CodecString: XviD
----[Information] Bits Depth: 8
----[Information] Format: MPEG-4 Visual
----[Information] AspectRatio: 1.773
----[Information] AspectRatioString: 16:9
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default:
----[Information] DefaultString:
----[Information] Forced:
----[Information] ForcedString:
---[Information] Audio
----[Information] ID: 1
----[Information] StreamOrder: 1
----[Information] Format: AC-3
----[Information] FormatProfile:
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode: CBR
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default:
----[Information] DefaultString:
----[Information] Forced:
----[Information] ForcedString:
--[Information] [02/01/2014 22:26:28] MkvInfo
---[NoImage] File 'C:\Users\root\Desktop\RIP\video1.avi': container: AVI [is_providing_timecodes:1]
---[NoImage] Track ID 0: video (XVID)
---[NoImage] Track ID 1: audio (AC3)
--[Information] [02/01/2014 22:26:28] Video: C:\Users\root\Desktop\RIP\video1.avi
--[Information] [02/01/2014 22:26:28] Audio: C:\Users\root\Desktop\RIP\video1.avi ([1] - AC-3 - 2 channels / 48.0 KHz / Italian)
-[Information] Log for job1 (mux, video1.avi -> video1.mkv)
--[Information] [02/01/2014 22:26:35] Started handling job
--[Information] [02/01/2014 22:26:35] Preprocessing
--[Information] [02/01/2014 22:26:35] MediaInfo
---[Information] File: C:\Users\root\Desktop\RIP\video1.avi
---[Information] General
----[Information] Format: AVI
----[Information] FormatString: AVI
----[Information] FileSize: 1607043072
----[Information] PlayTime: 01:54:03.680
---[Information] Video
----[Information] ID: 0
----[Information] StreamOrder: 0
----[Information] Width: 624
----[Information] Height: 352
----[Information] FrameCount: 171092
----[Information] FrameRate: 25.000
----[Information] FrameRateOriginal:
----[Information] FrameRateMode:
----[Information] ScanType: Progressive
----[Information] Codec: XVID
----[Information] CodecString: XviD
----[Information] Bits Depth: 8
----[Information] Format: MPEG-4 Visual
----[Information] AspectRatio: 1.773
----[Information] AspectRatioString: 16:9
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default:
----[Information] DefaultString:
----[Information] Forced:
----[Information] ForcedString:
---[Information] Audio
----[Information] ID: 1
----[Information] StreamOrder: 1
----[Information] Format: AC-3
----[Information] FormatProfile:
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode: CBR
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default:
----[Information] DefaultString:
----[Information] Forced:
----[Information] ForcedString:
--[Information] [02/01/2014 22:26:36] Job commandline: "C:\Program Files (x86)\MeGUI_2153_x86\tools\mkvmerge\mkvmerge.exe" -o "C:\Users\root\Desktop\RIP\aa001uht.cys\video1.mkv" "C:\Users\root\Desktop\RIP\video1.avi" "--compression" "0:none" --ui-language en
--[Information] [02/01/2014 22:26:36] Process started
--[Information] [02/01/2014 22:26:36] Standard output stream
---[Information] [02/01/2014 22:26:36] mkvmerge v6.6.0 ('The Edge Of The In Between') built on Dec 1 2013 17:55:00
---[Information] [02/01/2014 22:26:36] 'C:\Users\root\Desktop\RIP\video1.avi': Using the demultiplexer for the format 'AVI'.
---[Information] [02/01/2014 22:26:36] 'C:\Users\root\Desktop\RIP\video1.avi' track 0: Using the output module for the format 'MPEG-4'.
---[Information] [02/01/2014 22:26:36] 'C:\Users\root\Desktop\RIP\video1.avi' track 1: Using the output module for the format 'AC3'.
---[Information] [02/01/2014 22:26:36] The file 'C:\Users\root\Desktop\RIP\aa001uht.cys\video1.mkv' has been opened for writing.
---[Information] [02/01/2014 22:26:48] The cue entries (the index) are being written...
---[Information] [02/01/2014 22:26:48] Muxing took 13 seconds.
--[Information] [02/01/2014 22:26:36] Standard error stream
--[Information] [02/01/2014 22:26:48] MediaInfo
---[Information] File: C:\Users\root\Desktop\RIP\aa001uht.cys\video1.mkv
---[Information] General
----[Information] Format: Matroska
----[Information] FormatString: Matroska
----[Information] FileSize: 1600224300
----[Information] PlayTime: 01:54:03.680
---[Information] Video
----[Information] ID: 1
----[Information] StreamOrder: 0
----[Information] Width: 624
----[Information] Height: 352
----[Information] FrameCount: 171092
----[Information] FrameRate: 25.000
----[Information] FrameRateOriginal:
----[Information] FrameRateMode: CFR
----[Information] ScanType: Progressive
----[Information] Codec: XVID
----[Information] CodecString: XviD
----[Information] Bits Depth: 8
----[Information] Format: MPEG-4 Visual
----[Information] AspectRatio: 1.773
----[Information] AspectRatioString: 16:9
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
---[Information] Audio
----[Information] ID: 2
----[Information] StreamOrder: 1
----[Information] Format: AC-3
----[Information] FormatProfile:
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode: CBR
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
--[Information] [02/01/2014 22:26:48] Postprocessing
---[Information] [02/01/2014 22:26:48] Deleting intermediate files
--[Information] [02/01/2014 22:26:48] Job completed
-[Information] Log for job2 (ext, video1.mkv -> )
--[Information] [02/01/2014 22:26:48] Started handling job
--[Information] [02/01/2014 22:26:48] Preprocessing
--[Information] [02/01/2014 22:26:48] MediaInfo
---[Information] File: C:\Users\root\Desktop\RIP\aa001uht.cys\video1.mkv
---[Information] General
----[Information] Format: Matroska
----[Information] FormatString: Matroska
----[Information] FileSize: 1600224300
----[Information] PlayTime: 01:54:03.680
---[Information] Video
----[Information] ID: 1
----[Information] StreamOrder: 0
----[Information] Width: 624
----[Information] Height: 352
----[Information] FrameCount: 171092
----[Information] FrameRate: 25.000
----[Information] FrameRateOriginal:
----[Information] FrameRateMode: CFR
----[Information] ScanType: Progressive
----[Information] Codec: XVID
----[Information] CodecString: XviD
----[Information] Bits Depth: 8
----[Information] Format: MPEG-4 Visual
----[Information] AspectRatio: 1.773
----[Information] AspectRatioString: 16:9
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
---[Information] Audio
----[Information] ID: 2
----[Information] StreamOrder: 1
----[Information] Format: AC-3
----[Information] FormatProfile:
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode: CBR
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
--[Information] [02/01/2014 22:26:48] Job commandline: "C:\Program Files (x86)\MeGUI_2153_x86\tools\mkvmerge\mkvextract.exe" tracks "C:\Users\root\Desktop\RIP\aa001uht.cys\video1.mkv" --ui-language en 1:"C:\Users\root\Desktop\RIP\aa001uht.cys\video1 - [0] Italian.ac3"
--[Information] [02/01/2014 22:26:48] Process started
--[Information] [02/01/2014 22:26:48] Standard output stream
---[Information] [02/01/2014 22:26:48] Extracting track 1 with the CodecID 'A_AC3' to the file 'C:\Users\root\Desktop\RIP\aa001uht.cys\video1 - [0] Italian.ac3'. Container format: Dolby Digital (AC3)
--[Information] [02/01/2014 22:26:48] Standard error stream
--[Information] [02/01/2014 22:26:52] Postprocessing
---[Information] [02/01/2014 22:26:52] Deleting intermediate files
--[Information] [02/01/2014 22:26:52] Job completed
-[Information] Log for job5 (idx, video1.mkv -> video1.mkv.lwi)
--[Information] [02/01/2014 22:26:52] Started handling job
--[Information] [02/01/2014 22:26:52] Preprocessing
--[Information] [02/01/2014 22:26:52] Job commandline: "C:\Windows\system32\cmd.exe" /c
--[Information] [02/01/2014 22:26:52] Process started
--[Information] [02/01/2014 22:26:52] Standard output stream
--[Information] [02/01/2014 22:26:52] Standard error stream
--[Information] [02/01/2014 22:26:54] Job completed


I had to change the Indexer/Opening order (putting LSMASH at the end) to make OCE working again...

[mini-moose]

mini-moose: thanks for the logs. no time yet to check them, because

thanks, I hope you'll have time later on.

2449 [Update] show the lsmash package in the updater
2448 [LSMASH Indexer] added LSMASHVideoSource/LWLibavVideoSource support

What are the advantages of L-Smash? I remember it was discussed here but can't find it now.

[detmek]

Hi Zathor. I tried to use File Indexer with LSmash and I got error message:
[Information] Log
-[Information] Versions
--[Information] [02-Jan-14 22:53:22] MeGUI: 2449
--[Information] [02-Jan-14 22:53:22] Operating System: Windows 7 Premium Edition x86 SP1 (6.1.65536.7601)
--[Information] [02-Jan-14 22:53:22] .Net Framework: 4.5 (4.5.50709)
--[Information] [02-Jan-14 22:53:22] AviSynth: 2.6.0.4 (28-09-2013) (inactive)
--[Information] [02-Jan-14 22:53:22] AviSynth+ portable: 2.6.0.5 (11-12-2013) (active)
--[Information] [02-Jan-14 22:53:22] DevIL: 1.7.8 (26-11-2013)
--[Information] [02-Jan-14 22:53:22] AvisynthWrapper: (02-01-2009)
--[Information] [02-Jan-14 22:53:23] Haali Matroska Splitter: 1.13.138.14 (14-04-2013)
--[Information] [02-Jan-14 22:53:23] Haali DSS2: (14-04-2013)
--[Information] [02-Jan-14 22:53:23] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
--[Information] [02-Jan-14 22:53:23] LinqBridge: 1.0.0.0 (28-05-2009)
--[Information] [02-Jan-14 22:53:23] MediaInfo: 0.7.65.0 (21-11-2013)
--[Information] [02-Jan-14 22:53:23] MediaInfoWrapper: 0.7.61.0 (06-01-2013)
--[Information] [02-Jan-14 22:53:23] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
--[Information] [02-Jan-14 22:53:23] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
--[Information] [02-Jan-14 22:53:23] 7z: 9.20 (18-11-2010)
-[Information] Update detection
--[Information] [02-Jan-14 22:53:23] Automatic update is disabled
--[Information] [02-Jan-14 22:53:27] Connecting to server: http://megui.xvidvideo.ru/auto/
--[Information] [02-Jan-14 22:53:27] All files are up to date
--[Information] [02-Jan-14 22:53:49] Updating lsmash. File 1/1.
--[Information] [02-Jan-14 22:53:56] Files which have been successfully updated: 1
-[Information] FileIndexer
--[Information] [02-Jan-14 22:54:22] MediaInfo
---[Information] File: C:\BR.mkv
---[Information] General
----[Information] Format: Matroska
----[Information] FormatString: Matroska
----[Information] FileSize: 17718818
----[Information] PlayTime: 00:04:51.437
---[Information] Video
----[Information] ID: 1
----[Information] StreamOrder: 0
----[Information] Width: 640
----[Information] Height: 360
----[Information] FrameCount: 6987
----[Information] FrameRate: 23.976
----[Information] FrameRateOriginal:
----[Information] FrameRateMode: CFR
----[Information] ScanType: Progressive
----[Information] Codec: V_MPEG4/ISO/AVC
----[Information] CodecString: AVC
----[Information] Bits Depth: 8
----[Information] Format: AVC
----[Information] AspectRatio: 1.778
----[Information] AspectRatioString: 16:9
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
---[Information] Audio
----[Information] ID: 2
----[Information] StreamOrder: 1
----[Information] Format: AAC
----[Information] FormatProfile: LC
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 44100
----[Information] SamplingRateString: 44.1 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode:
----[Information] Delay: 6
----[Information] Title:
----[Information] Language: unknown
----[Information] LanguageString: unknown
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
-[Information] Log for job1 (ext, BR.mkv -> )
--[Information] [02-Jan-14 22:54:35] Started handling job
--[Information] [02-Jan-14 22:54:35] Preprocessing
--[Information] [02-Jan-14 22:54:35] MediaInfo
---[Information] File: C:\BR.mkv
---[Information] General
----[Information] Format: Matroska
----[Information] FormatString: Matroska
----[Information] FileSize: 17718818
----[Information] PlayTime: 00:04:51.437
---[Information] Video
----[Information] ID: 1
----[Information] StreamOrder: 0
----[Information] Width: 640
----[Information] Height: 360
----[Information] FrameCount: 6987
----[Information] FrameRate: 23.976
----[Information] FrameRateOriginal:
----[Information] FrameRateMode: CFR
----[Information] ScanType: Progressive
----[Information] Codec: V_MPEG4/ISO/AVC
----[Information] CodecString: AVC
----[Information] Bits Depth: 8
----[Information] Format: AVC
----[Information] AspectRatio: 1.778
----[Information] AspectRatioString: 16:9
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
---[Information] Audio
----[Information] ID: 2
----[Information] StreamOrder: 1
----[Information] Format: AAC
----[Information] FormatProfile: LC
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 44100
----[Information] SamplingRateString: 44.1 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode:
----[Information] Delay: 6
----[Information] Title:
----[Information] Language: unknown
----[Information] LanguageString: unknown
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
--[Information] [02-Jan-14 22:54:35] Job commandline: "D:\PROGRAMI\MeGUI\tools\mkvmerge\mkvextract.exe" tracks "C:\BR.mkv" --ui-language en 1:"G:\x264\BR - [0] unknown 6ms.aac"
--[Information] [02-Jan-14 22:54:36] Process started
--[Information] [02-Jan-14 22:54:36] Standard output stream
---[Information] [02-Jan-14 22:54:37] Extracting track 1 with the CodecID 'A_AAC' to the file 'G:\x264\BR - [0] unknown 6ms.aac'. Container format: raw AAC file with ADTS headers
--[Information] [02-Jan-14 22:54:36] Standard error stream
--[Information] [02-Jan-14 22:54:40] Postprocessing
---[Information] [02-Jan-14 22:54:40] Deleting intermediate files
--[Information] [02-Jan-14 22:54:40] Job completed
-[Information] Log for job2 (idx, BR.mkv -> BR.mkv.lwi)
--[Information] [02-Jan-14 22:54:40] Started handling job
--[Information] [02-Jan-14 22:54:40] Preprocessing
--[Information] [02-Jan-14 22:54:40] Job commandline: "C:\Windows\system32\cmd.exe" /c
--[Information] [02-Jan-14 22:54:40] Process started
--[Information] [02-Jan-14 22:54:40] Standard output stream
--[Information] [02-Jan-14 22:54:40] Standard error stream
--[Information] [02-Jan-14 22:54:45] Job completed

[mini-moose]

Hi Zathor. I tried to use File Indexer with LSmash and I got error message:
Tried it too and also got an error.

[TSoft]

In order to make working File Indexer with LSmash you have to copy the dll msvcr120.dll (located in Megui/tools/lsmash) in C:\Windows\system32

[TSoft]

Please post your log file.

I cannot reproduce the error, :thanks:

[Zathor]

I tried to encode with One Click Encoder again to reproduce the error, but now "One Click Encoder" doesn't work. I had to change the Indexer/Opening order (putting LSMASH at the end) to make OCE working again...
There isn't an error in the log. Please describe the problem.

What are the advantages of L-Smash? I remember it was discussed here but can't find it now.
FFMS has some quirks e.g. you have to use threads=1 otherwise it may crash. Someone else may explain other advantages. I see it as an alternative to ffms.

Hi Zathor. I tried to use File Indexer with LSmash and I got error message:
Which error message did you get? There is sadly nothing in the log.

Tried it too and also got an error.
What kind of error did you get?

[Zathor]

2 logs attached (renamed the extension to .txt cause .log wasn't getting accepted).
one with sar in x264, one without. added the relevant parts from avinaptic/mediainfo at the end of the logs.
Please post also the content of D:\test\encode\test.avs. I try to reproduce it. Also please upload your OneClick profile (select File\Export Presets and select it).
Btw. what is the difference between the two logs? What did you change to have this different output?

[Shevek]

In order to make working File Indexer with LSmash you have to copy the dll msvcr120.dll (located in Megui/tools/lsmash) in C:\Windows\system32

This is not a good idea at all... Unless you really know what you are doing you shouldn't mess around with the Windows folder at all.

Instead, do a proper install of the full C++ Redistributable package: http://www.microsoft.com/en-us/download/details.aspx?id=40784

[mini-moose]

What kind of error did you get?

-[Information] Versions
--[Information] [1/2/2014 11:20:47 PM] MeGUI: 2449
--[Information] [1/2/2014 11:20:47 PM] Operating System: Windows 7 x64 SP1 (6.1.65536.7601)
--[Information] [1/2/2014 11:20:47 PM] .Net Framework: 4.5.x (4.5.50938)
--[Information] [1/2/2014 11:20:47 PM] AviSynth: 2.6.0.4 (18-09-2013)
--[Information] [1/2/2014 11:20:47 PM] AvisynthWrapper: (02-01-2009)
--[Information] [1/2/2014 11:20:47 PM] Haali Matroska Splitter: 1.13.138.14 (14-04-2013)
--[Information] [1/2/2014 11:20:47 PM] Haali DSS2: (14-04-2013)
--[Information] [1/2/2014 11:20:47 PM] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
--[Information] [1/2/2014 11:20:47 PM] LinqBridge: 1.0.0.0 (28-05-2009)
--[Information] [1/2/2014 11:20:47 PM] MediaInfo: 0.7.65.0 (21-11-2013)
--[Information] [1/2/2014 11:20:47 PM] MediaInfoWrapper: 0.7.61.0 (06-01-2013)
--[Information] [1/2/2014 11:20:47 PM] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
--[Information] [1/2/2014 11:20:47 PM] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
--[Information] [1/2/2014 11:20:47 PM] 7z: 9.20 (18-11-2010)
-[Information] Update detection
--[Information] [1/2/2014 11:20:47 PM] Automatic update is disabled
--[Information] [1/2/2014 11:20:50 PM] Connecting to server: http://megui.xvidvideo.ru/auto/
--[Information] [1/2/2014 11:20:50 PM] All files are up to date
--[Information] [1/2/2014 11:21:11 PM] Updating lsmash. File 1/1.
--[Information] [1/2/2014 11:21:15 PM] Files which have been successfully updated: 1
-[Information] FileIndexer
--[Information] [1/2/2014 11:22:36 PM] MediaInfo
---[Information] File: D:\BLURAY\00000.m2ts
-[Information] Format: BDAV
-[Information] FormatString: BDAV
-[Information] FileSize: 25722089472
-[Information] PlayTime: 01:34:04.830
---[Information] General
-[Information] ID: 4113
-[Information] StreamOrder: 0-0
-[Information] Width: 1920
-[Information] Height: 1080
-[Information] FrameCount: 123817
-[Information] FrameRate: 23.976
-[Information] FrameRateOriginal:
-[Information] FrameRateMode:
-[Information] ScanType: Progressive
-[Information] Codec: AVC
-[Information] CodecString: AVC
-[Information] Bits Depth: 8
-[Information] Format: AVC
-[Information] AspectRatio: 1.778
-[Information] AspectRatioString: 16:9
-[Information] Delay: 11650.667
-[Information] Title:
-[Information] Language:
-[Information] LanguageString:
-[Information] Default:
-[Information] DefaultString:
-[Information] Forced:
-[Information] ForcedString:
---[Information] Video
-[Information] ID: 4352
-[Information] StreamOrder: 0-1
-[Information] Format: DTS
-[Information] FormatProfile: MA / Core
-[Information] FormatSettingsSBR:
-[Information] FormatSettingsPS:
-[Information] SamplingRate: 48000
-[Information] SamplingRateString: 48.0 KHz
-[Information] Channels: 6
-[Information] ChannelsString: 6 channels
-[Information] ChannelPositionsString2: 3/2/0.1
-[Information] BitRateMode: VBR
-[Information] Delay: 11650.667
-[Information] Title:
-[Information] Language:
-[Information] LanguageString:
-[Information] Default:
-[Information] DefaultString:
-[Information] Forced:
-[Information] ForcedString:
---[Information] Audio
-[Information] ID: 4608
-[Information] StreamOrder: 0-2
-[Information] Codec: PGS
-[Information] CodecString: PGS
-[Information] Delay:
-[Information] Title:
-[Information] Language:
-[Information] LanguageString:
-[Information] Default:
-[Information] DefaultString:
-[Information] Forced:
-[Information] ForcedString:
---[Information] Text
-[Information] Log for job1 (idx, 00000.m2ts -> 00000.m2ts.lwi)
--[Information] [1/2/2014 11:29:04 PM] Started handling job
--[Information] [1/2/2014 11:29:04 PM] Preprocessing
--[Information] [1/2/2014 11:29:04 PM] Job commandline: "C:\Windows\system32\cmd.exe" /c
--[Information] [1/2/2014 11:29:04 PM] Process started
--[Information] [1/2/2014 11:29:04 PM] Standard output stream
--[Information] [1/2/2014 11:29:04 PM] Standard error stream
--[Information] [1/2/2014 11:29:04 PM] Job completed

[Zathor]

In order to make working File Indexer with LSmash you have to copy the dll msvcr120.dll (located in Megui/tools/lsmash) in C:\Windows\system32
Are you sure that this is the problem? In my virtual machines (XP, W7) I do not have msvcr120.dll in any windows folder. When I delete it from the tools\lsmash folder I get the error - and that's the good point. I am now able to see that there is no error at all in the log. Only a failed job.
EDIT: And please try to copy the file to the root folder of MeGUI (and restart MeGUI). If this solves your problem I can handle it. But I do not plan to write any files into the windows folder.

[mini-moose]

Please post also the content of D:\test\encode\test.avs. I try to reproduce it.

avs:

LoadPlugin("C:\megui\tools\dgindex\DGDecode.dll")
Mpeg2Source("D:\test\encode\\test.d2v")
Load_Stdcall_Plugin("C:\megui\tools\yadif\yadif.dll")
Yadif(order=-1)
spline36resize(718,404,2,0,-0,-2)


Also please upload your OneClick profile...Btw. what is the difference between the two logs? What did you change to have this different output?

I've included 2 profiles:

1) OneClick_dp_ 25fps: uses sar 1:1. That one is fine other than the double DAR report in mediainfo. I get that also when using x264 in cmd without the import avs. Doesn't seem like an issue. I think it's a mediainfo quirk that has something to do with the resolution mod.

2) OneClick_dp_ 25fps-no.SAR: uses default sar setting (sar 0:0 I think is the x264 default). shows the custom pixel shape.

I think the reason is the darx/y arguments in the import avs file that megui generates:
global MeGUI_darx = 16
global MeGUI_dary = 9

that's 1.7777777, while 718,404 is 1.7772277. 1.0003094 difference, which is pretty much what avinaptic reports: Custom pixel shape (3232:3231 = 1.00031)

The error is tiny but it might distort display a little bit. It's avoided by either using sar 1:1 or by not using darx/y.

[detmek]

In order to make working File Indexer with LSmash you have to copy the dll msvcr120.dll (located in Megui/tools/lsmash) in C:\Windows\system32


Which error message did you get? There is sadly nothing in the log.


I installed Visual C++ 2013 redistributable to get msvcr120.dll into System32 folder. I also copied msvcr120.dll from lsmash folder into MeGUI root folder but it doesn't work. I don't get error, sorry. Job just fails. It doesn't work for MKV or MP4 files.

Maybe it is a problem with command line:

lsmash:
-[Information] Log for job1 (idx, Arrow.mp4 -> Arrow.mp4.lwi)
--[Information] [03-Jan-14 00:40:51] Started handling job
--[Information] [03-Jan-14 00:40:51] Preprocessing
--[Information] [03-Jan-14 00:40:51] Job commandline: "C:\Windows\system32\cmd.exe" /c
--[Information] [03-Jan-14 00:40:51] Process started
--[Information] [03-Jan-14 00:40:51] Standard output stream
--[Information] [03-Jan-14 00:40:51] Standard error stream
--[Information] [03-Jan-14 00:40:57] Job completed

ffms:
-[Information] Log for job1 (idx, Arrow.mp4 -> Arrow.mp4.ffindex)
--[Information] [03-Jan-14 00:41:32] Started handling job
--[Information] [03-Jan-14 00:41:32] Preprocessing
--[Information] [03-Jan-14 00:41:32] Job commandline: "D:\PROGRAMI\MeGUI\tools\ffms\ffmsindex.exe" -t -1 -f "G:\Test\Arrow.mp4" "G:\x264\Arrow.mp4.ffindex"
--[Information] [03-Jan-14 00:41:33] Process started
--[Information] [03-Jan-14 00:41:33] Standard output stream
---[Information] [03-Jan-14 00:42:10] Writing index... done.
--[Information] [03-Jan-14 00:41:33] Standard error stream
--[Information] [03-Jan-14 00:42:11] MediaInfo
---[Information] File: G:\x264\Arrow.mp4.ffindex
---[Information] General
----[Information] Format:
----[Information] FormatString:
----[Information] FileSize: 708447
----[Information] PlayTime:

[AMED]

Can you please try it also with 2.19?
http://megui.org/auto/ffms2-2.19.7zI had zero crashes with FFMS2 2.18 RC1. I'm now testing 2.19.

[hello_hello]

I'm not sure whether it's the update to version 2449 which did it or something to do with the fact I downloaded lsmash to take it for a spin, but.....

When opening the file indexer it now defaults to lsmash for some file types (I guess when ffmsindex would normally be used) but while lsmash is the indexer there's no opportunity to rename the index file or change it's location. I understand that, but unfortunately after switching to ffmsindex the same applies. If I open a vob file so that dgindex is the default indexer I can rename/move the index file, and switching to ffmsindex does the same, but once lsmash has been selected the ability to rename/move other types of index files after selecting one of them is lost.

Also....
I understand from the changelog the lsmash index file must be in the same folder as the source. When MeGUI is set to use a different default output directory in settings however, the file indexer still defaults to the specified directory as usual, and because there's no option to change it when lsmash is the indexer, there's no way to run the indexing job without it resulting in an error. Should using lsmash as the indexer force the File Indexer to ignore the output directory specified in MeGUI's settings and use the source directory instead?

Out of curiosity (I know nothing about lsmash) it would appear lsmash doesn't create an index file for MP4, yet if the File Indexer isn't set to use the source directory as the output directory, indexing still results in an error. Why would that be?
All MeGUI shows for the command line in the log file is the following, regardless of whether indexing was successful or not (or the type of file being opened):
Job commandline: "C:\WINDOWS\system32\cmd.exe" /c

Even though MeGUI worked perfectly before downloading lsmash, once it's installed MeGUI considers it a required component and refuses to work if it's not present (ie if the lsmash folder is deleted). Would it be preferred behaviour for MeGUI to revert back to functioning without it, just as it functioned before lsmash was installed? It was listed as a disabled update until I manually enabled it, which would seem to indicate it's not actually required for MeGUI to function.

One last question....
Is lsmash a better indexer than ffmsindex? I ask out of curiosity given the File Indexer now defaults to using it in preference to ffmsindex, at least for the file types I tried (mkv, mp4 and avi).

Thanks!

Edit: Given a few posts have been added while I was writing this one....
For me indexing with lsmash only results in an error if the default output directory is set to something other than the source in MeGUI's settings. If there's no default output directory set, lsmash indexing works fine. Regardless of the success or failure of indexing, all MeGUI shows for the command line in the log file is this:
Job commandline: "C:\Windows\system32\cmd.exe" /c

[hello_hello]

Around 18 months ago I enquired as to whether MeGUI adding frame rate conversion to the script after indexing with ffmsindex could be considered a minor act of cleverness (given it does so for DirectShowSource scripts) only to be shot down in flames (http://forum.doom9.org/showthread.php?p=1584436#post1584436). I tried again six months later, but due to what seemed to be a slight miscommunication regarding what I was referring to, I was told it was a bad idea (http://forum.doom9.org/showthread.php?p=1608107#post1608107).
However with the arrival of MeGUI version 2439 not so long ago, MeGUI began adding ffmsindex's fpsnum and fpsden to the scripts it creates, allowing me to now ask a similar question regarding lsmash without feeling too foolish. :)

I indexed a couple of the MKVs which originally gave me problems when using ffmsindex (fpsnum and fpsden not added) and the result when indexing with lsmash was the same. Does lsmash have a frame rate conversion function similar to "fpsnum and fpsden" which MeGUI could automatically add to the scripts it creates?

Out of curiosity, the log file says (regarding ffmsindex) "add fpsnum and fpsden if required". So far it's always been added after indexing but I was wondering, when would MeGUI consider adding fpsnum and fpsden is required and when would it decide it's not?

Thanks.

[TSoft]

I don't know what to say, by coping the dll in the system32 folder, LSMASH works. Otherwise it stops the job without giving error.

[kalehrl]

kalehrl: no x264 profiles are beeing pushed out. Maybe you had those profiles still cached in your update_cache folder? You should avoid to use them.
I know that and I haven't changed anything manually in MeGUI folder but they reappeared possibly with some of the updates.
I erased them in MeGUI\allprofiles\x264 and hopefully they won't reappear.

[TSoft]

Are you sure that this is the problem? In my virtual machines (XP, W7) I do not have msvcr120.dll in any windows folder. When I delete it from the tools\lsmash folder I get the error - and that's the good point. I am now able to see that there is no error at all in the log. Only a failed job.
EDIT: And please try to copy the file to the root folder of MeGUI (and restart MeGUI). If this solves your problem I can handle it. But I do not plan to write any files into the windows folder.

OK, I copy the dll to the root folder of Megui but......

-[Error] [03/01/2014 09:58:51] Standard error stream
---[Error] [03/01/2014 09:58:53] avs [error]: LoadPlugin: unable to load "C:\Program Files (x86)\MeGUI_2153_x86\tools\lsmash\LSMASHSource.dll"
---[Information] [03/01/2014 09:58:53] (C:\Users\root\Desktop\RIP\42pvrc0n.ok5\video.mkv.avs, line 3)
--[Error] [03/01/2014 09:58:53] Process exits with error: 0xFFFFFFFF (-1)
--[Warning] [03/01/2014 09:58:53] The 64 bit mode of x264 is enabled. Depending on the error it may help to disable it in the MeGUI settings.
--[Information] [03/01/2014 09:58:54] Job completed

[Zathor]

Maybe it is a problem with command line:
--[Information] [03-Jan-14 00:40:51] Job commandline: "C:\Windows\system32\cmd.exe" /c
No, MeGUI needs to run an exe process during the job processing. As there is no such indexer available for lsmash I tricked MeGUI with this cmd process. Maybe not the best way (no time progress during the job run time) but it works without much effort.

For me indexing with lsmash only results in an error if the default output directory is set to something other than the source in MeGUI's settings. If there's no default output directory set, lsmash indexing works fine.
Thanks, that will be fixed.

I indexed a couple of the MKVs which originally gave me problems when using ffmsindex (fpsnum and fpsden not added) and the result when indexing with lsmash was the same. Does lsmash have a frame rate conversion function similar to "fpsnum and fpsden" which MeGUI could automatically add to the scripts it creates?
Please upload such a MKV file. And no, lsmash does not have such options.

Out of curiosity, the log file says (regarding ffmsindex) "add fpsnum and fpsden if required". So far it's always been added after indexing but I was wondering, when would MeGUI consider adding fpsnum and fpsden is required and when would it decide it's not?
It will be added when the source FPS is known. Therefore in most cases it will be added. It works way better than adding AssumeFPS() but it may have some problems with VFR files. Samples are welcome :)

I know that and I haven't changed anything manually in MeGUI folder but they reappeared possibly with some of the updates.
I erased them in MeGUI\allprofiles\x264 and hopefully they won't reappear.
Is it possible to upload all log files of the last days? I would nike to see if they have been installed by the updater (for whatever reason).

OK, I copy the dll to the root folder of Megui but......
Copy the file also in the tools\x264 folder. I try to find a way to get this to work without installing the redist package or copying it to the windows folder.

[TSoft]

Quote:
Originally Posted by TSoft View Post
OK, I copy the dll to the root folder of Megui but......
Copy the file also in the tools\x264 folder. I try to find a way to get this to work without installing the redist package or copying it to the windows folder.

I tried to put the LSMASHSource.dll in
- tools/avs
- tools/avs/plugin
and in tools/x264
but still the same problem.

If I put msvcr120.dll in C:\Windows\SysWOW64 all is working fine and without error.

P.S: My OS isn't W7 or XP, but Windows Web Server 2008 R2 Service Pack 1 64 bit

[hello_hello]

I don't know what to say, by coping the dll in the system32 folder, LSMASH works. Otherwise it stops the job without giving error.

Odd. I'm using XP so I checked the system32 folder. I don't have msvcr120.dll in there. Lsmash works fine as long as MeGUI isn't configured to use a specific output folder (ie lsmash can use the input source folder).

[Zathor]

I tried to put the LSMASHSource.dll in
- tools/avs
- tools/avs/plugin
and in tools/x264
but still the same problem.
Please try that with the msvcr120.dll from the tools\lsmash folder.

[TSoft]

Please try that with the msvcr120.dll from the tools\lsmash folder.

Not working :(

In my case, my Megui is configured to use a specific folder!

But......

if I CHECK the option in Settings (Main Configuration) "Always use the included Avisynth" then there is no need to copy any dll in system32 or SysWOW64 !!!

[hello_hello]

Please upload such a MKV file. And no, lsmash does not have such options.

My upload speed is very, very slow, but there's a little zip file here (http://www.sendspace.com/file/u0jh1g) containing a 30 second AVI and MKV (same video) with a single duplicate/missing frame. They will serve fine to illustrate the different frame counts when indexing with ffmsindex (with and without fpsnum and fpsden), and also when indexing with lsmash.
There's a text file included in the zip file explaining exactly what to look out for.

Cheers.

PS I forgot to mention.... when indexing with Ismash, it changes the frame rate to match the duration. So due to one duplicate/missing frame in the 30 second sample, the output frame rate changed from 25fps to 24.972fps. Without fpsnum and fpsden added to the script to duplicate the "repeated" frame, ffmsindex does the same thing.

[hello_hello]

Please try that with the msvcr120.dll from the tools\lsmash folder.

While switching to the installed version of Avisynth (2.5.8) to check something else, it occurred to me the lsmash error might in a way be Avisynth related, so I gave indexing with lsmash a test. Sure enough it resulted in an error until I copied msvcr120.dll to the system32 folder. Once it's there, indexing works again. When MeGUI is using the portable Avisynth plus, it seems msvcr120.dll doesn't need to be there.
I assume there's no danger in manually copying msvcr120.dll to the system32 folder?

The something else I was checking.....
When is a CPlugin not a CPlugin? At the moment while running the portable version of AVISynth+, MeGUI uses LoadCPlugin to load ffms2.dll, but when I try to open the script with a different program (and therefore via Avisynth 2.5.8), Avisynth complains about it not being a C plugin. Would it be safe to assume it's not actually a C plugin, it's just that Avisynth+ isn't as whiney as Avisynth, because it'll load ffms.dll as either a standard or a C plugin (I'm referring to ffms 2.19).

[Zathor]

Test build available: http://megui.org/test/MeGUI.zip
The build number is still 2449 but these changes are included:
xxxx [LSMASH Indexer] show time/file progress during indexing
added possibility to set output file/folder
blocked indexer if input file is in a read only directory
lowered the default priority so that it will be used after FFMS
added log information
copy the runtimes if required
[FFMS Indexer] defaults to LoadPlugin if LoadCPlugin is also possible

The hint with AviSynth was good. LSMASH does work if msvcr120.dll will be copied to the same directories as the ms*110.dll files from the portable AviSynth:
MeGUI
MeGUI\tools\lsmash
MeGUI\tools\ffmpeg
MeGUI\tools\x264
MeGUI\tools\x264_10b
MeGUI\tools\x265
MeGUI\tools\xvid_encraw

I am now going to implement this.

[TSoft]

@Zathor Thanks for your work, you're amazing.

[Zathor]

Updated build in my posting above. Please test if the runtimes are copied.
EDIT: Now online as build 2450.

[TSoft]

Updated build in my posting above. Please test if the runtimes are copied.
EDIT: Now online as build 2450.

For me now it works without any problem. Thank you very much. I have not had to put any dll in the various system32 folders.

[hello_hello]

All seems to be back to normal with 2450 for me too. Lsmash works with both the installed and portable Avisynth versions (no msvcr120.dll in the system32 folder)

Thank you.

[tebasuna51]

I can't update last MeGUI versions:
[Warning] Log
-[Information] Versions
--[Information] [04/01/2014 12:48:27] MeGUI: 2424
--[Information] [04/01/2014 12:48:27] Operating System: Windows XP Professional x86 SP3 (5.1.196608.2600)
--[Information] [04/01/2014 12:48:27] .Net Framework: 4.0 (4.0.30319)
--[Information] [04/01/2014 12:48:27] AviSynth: 2.6.0.2 (25-05-2011)
--[Information] [04/01/2014 12:48:27] AvisynthWrapper: (02-01-2009)
--[Information] [04/01/2014 12:48:27] Haali Matroska Splitter: 1.13.138.14 (14-04-2013)
--[Information] [04/01/2014 12:48:28] Haali DSS2: (14-04-2013)
--[Information] [04/01/2014 12:48:28] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
--[Information] [04/01/2014 12:48:28] LinqBridge: 1.0.0.0 (28-05-2009)
--[Information] [04/01/2014 12:48:28] MediaInfo: 0.7.65.0 (21-11-2013)
--[Information] [04/01/2014 12:48:28] MediaInfoWrapper: 0.7.61.0 (06-01-2013)
--[Information] [04/01/2014 12:48:28] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
--[Information] [04/01/2014 12:48:28] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
--[Information] [04/01/2014 12:48:28] 7z: 9.20 (18-11-2010)
-[Warning] Update detection
--[Information] [04/01/2014 12:48:28] Automatic update is disabled
--[Information] [04/01/2014 12:48:33] Connecting to server: http://megui.org/auto/
--[Information] [04/01/2014 12:48:34] There are 2 files which can be updated.
--[Information] [04/01/2014 12:48:38] Updating core. File 1/2.
--[Warning] [04/01/2014 12:48:39] Could not install module 'core' as .NET 2.0 is required.
--[Information] [04/01/2014 12:48:39] Updating data. File 2/2.
--[Warning] [04/01/2014 12:48:39] Could not install module 'data' as at least MeGUI build 2444 is required.
--[Warning] [04/01/2014 12:48:39] Files which have not been successfully updated: 2

I have .NET 2.0 installed also.

[Zathor]

Can you please test this build?
http://megui.org/test/MeGUI.zip
In the "Versions" block in the log will be three entries regarding .NET. Please post them here.

[Wam7]

Problem with FFAudioSource is fixed for me, as also is the L-Smash issue. There was also a problem with the 'Add Folder' option for the One Click Encoder; a demux dialogue popped up requiring some kind of input that didn't work, though this is fixed now in the latest version.

Thanks.

[Zathor]

2454 [Log] show information about .NET 2.0 and 4.0
[Log] removed information about highest .NET build
2453 [Audio Encoder] fixed sometimes choosing the wrong decoder (regression of 2448)
2452 [Audio Encoder] lowered also the priority for the audio decoder
[Audio Encoder] default order: NicAudio, BassAudio, FFAudioSource, LWLibavAudioSource, DirectShow
2451 [Chapter Creator] added support for mkv input files
[Chapter Creator] added option to specify the minimum title length
[Chapter Creator] added option to specify the FPS value
[Chapter Creator] improved FPS detection for DVD/Bluray

[TSoft]

2454 [Log] show information about .NET 2.0 and 4.0
[Log] removed information about highest .NET build
2453 [Audio Encoder] fixed sometimes choosing the wrong decoder (regression of 2448)
2452 [Audio Encoder] lowered also the priority for the audio decoder
[Audio Encoder] default order: NicAudio, BassAudio, FFAudioSource, LWLibavAudioSource, DirectShow
2451 [Chapter Creator] added support for mkv input files
[Chapter Creator] added option to specify the minimum title length
[Chapter Creator] added option to specify the FPS value
[Chapter Creator] improved FPS detection for DVD/Bluray
Is the new build already online ? Ther is no update when I started Megui

[mini-moose]

2454 [Log] show information about .NET 2.0 and 4.0


does megui still need .net 2.0/3.5? copied mine to win8 and it wouldn't work cause they are not present.

[Zathor]

Is the new build already online ? Ther is no update when I started Megui
Yes, it is.

does megui still need .net 2.0/3.5? copied mine to win8 and it wouldn't work cause they are not present.
Currently .NET 2.0 is required (no other version is). I plan to switch to .NET 4.0.

[tebasuna51]

Can you please test this build?
http://megui.org/test/MeGUI.zip
In the "Versions" block in the log will be three entries regarding .NET. Please post them here.

[Error] Log
-[Error] Versions
--[Information] [04/01/2014 21:37:14] MeGUI: 2450
--[Information] [04/01/2014 21:37:14] Operating System: Windows XP Professional x86 SP3 (5.1.196608.2600)
--[Error] [04/01/2014 21:37:14] .Net Framework 2.0 not installed
--[Error] [04/01/2014 21:37:14] .Net Framework 2 not installed
--[Information] [04/01/2014 21:37:14] .Net Framework: 4.0.30319
...

I work always with .NET 2.0 from first intallation.

After I installed .NET 4 but work with MeGUI at last until v2424

[Zathor]

MeGUI uses the registry information to determine the installed .NET version. Please have a look into your registry: http://support.microsoft.com/kb/318785/en-us
Or upload an registry export of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP
Have you ever modified this part of the registry? Maybe you can try to uninstall & install .NET 2.0. The check does work on my XP SP3.

The check for .NET 2.0 does not make much sense as the application is running with it. But the check itself must work as otherwise the exe will be replaced with an 4.0 exe and then it will not work when 4.0 is not installed.