MeGUI: bug reports and feature requests

[LigH]

Nonsense. Updating packages or not does not slow down the encoding. It is not your bandwidth to be saved, but the amount of data downloaded from MeGUI's update servers during an update. Not during your encode. You can manually enable all packages which have been disabled while not using them for a while (only NeroAacEnc and Haali Media Splitter are obsolete and can be kept disabled).

There is surely a different reason for your encodes to be slower than expected. Most probably a lack of knowledge, rather in front of your monitor than inside MeGUI.

[tebasuna51]

No only NeroAacEnc and Haali Media Splitter can be kept disabled safely, there are also other with development stoped:
Avi-Mux GUI, BeSplit, Oggenc2, PgcDemux and tsMuxeR.

[wthreex]

Today ive lost all of my Oneclick Profiles i dont know why, But i remember a error showed up and said "Unable to read Nero AAc"... and my profiles gone.

[yorkfield25]

Preliminary log file only. During closing of MeGUI the well formed log file will be written.

-[Information] Versions
--[Information] MeGUI: 2908 x86
--[Information] MeGUI Debug Data: available
--[Information] Update Check: development update server
-[Information] Operating System: Windows 10 Pro 1809 x64 (10.0.17763.503)
-[Information] .NET Framework: 4.0 (4.0.0.0)
-[Information] .NET Framework: 4.7 (4.7.03190)
-[Information] Microsoft Visual C++ 2010 x64: 10.0.40219
-[Information] Microsoft Visual C++ 2010 x86: 10.0.40219
-[Information] Microsoft Visual C++ 2012 x64: 11.0.61030
-[Information] Microsoft Visual C++ 2012 x86: 11.0.61030
-[Information] Microsoft Visual C++ 2013 x64: 12.0.30501
-[Information] Microsoft Visual C++ 2013 x86: 12.0.30501
-[Information] Microsoft Visual C++ 2017 x64: 14.16.27027
-[Information] Microsoft Visual C++ 2017 x86: 14.16.27027
-[Information] Redistributables
-[Information] DPI: 100% (96/96)
-[Information] Resolution: 1920x1080
-[Information] Primary Screen: True
-[Information] Monitor 1
--[Information] System Information
-[Information] Update detection
-[Information] Haali Media Splitter: 1.13.138.14 (14-04-2013)
-[Information] Haali DSS2: (14-04-2013)
-[Information] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
-[Information] MediaInfo: 18.05.0.0 (08-05-2018)
-[Information] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
-[Information] 7z: 9.20 (18-11-2010)
--[Information] Component Information
-[Information] Version: 1.0.2847.0
-[Information] Date: 06-05-2018
-[Information] Interface: 3
-[Information] AviSynth Wrapper
-[Information] File Version: 0.1
-[Information] File Date: 20-12-2018
-[Information] File Name: AviSynth+ 0.1 (r2772, MT, i386)
-[Information] File Path: c:\windows\system32\avisynth.dll
-[Information] AviSynth Version: AviSynth+ 0.1 (r2772, MT, i386)
-[Information] AviSynth+: true
-[Information] AviSynth MT: true
-[Information] AviSynth
--[Information] AviSynth Information
--[Information] [15.05.2019 17:31:32] Connected to server: http://megui.tmebi.de/test/
-[Error] Unhandled error
--[Information] [15.05.2019 17:31:32] Exception message: Nieprawidłowy format ciągu wejściowego.
-[NoImage] w System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
-[NoImage] w System.Number.ParseDecimal(String value, NumberStyles options, NumberFormatInfo numfmt)
-[NoImage] w System.Convert.ToDecimal(String value, IFormatProvider provider)
-[NoImage] w MeGUI.UpdateHandler.ParseFileData(XmlNode node, XmlNode groupNode) w D:\MeGUI\_MeGUI_clean\packages\tools\update\UpdateHandler.cs:wiersz 1123
-[NoImage] w MeGUI.UpdateHandler.ParseUpdateXml(XmlNode currentNode, XmlNode groupNode, String path) w D:\MeGUI\_MeGUI_clean\packages\tools\update\UpdateHandler.cs:wiersz 1021
-[NoImage] w MeGUI.UpdateHandler.ParseUpdateXml(XmlNode currentNode, XmlNode groupNode, String path) w D:\MeGUI\_MeGUI_clean\packages\tools\update\UpdateHandler.cs:wiersz 1027
-[NoImage] w MeGUI.UpdateHandler.ParseUpdateXML() w D:\MeGUI\_MeGUI_clean\packages\tools\update\UpdateHandler.cs:wiersz 963
-[NoImage] w MeGUI.UpdateHandler.RefreshUpdateData() w D:\MeGUI\_MeGUI_clean\packages\tools\update\UpdateHandler.cs:wiersz 189
-[NoImage] w System.Threading.ThreadHelper.ThreadStart_Context(Object state)
-[NoImage] w System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
-[NoImage] w System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
-[NoImage] w System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
-[NoImage] w System.Threading.ThreadHelper.ThreadStart()
--[Information] [15.05.2019 17:31:32] Stacktrace
--[Information] [15.05.2019 17:31:32] Inner exception: null
Anu ideas?

[LigH]

Bold guess: The XML info from the update server contains a field that is expected to be a number but is not formatted like one? Looks like an issue to be investigates on the update server(s).

[LouieChuckyMerry]

I'm not sure if this is a bug or the way it should be. When I select a folder under "Options/Default Output Directory" then index a video file from a different folder, the index and script files are created in the "Default Output Directory"--which is correct--and the path written to the index file is to the different folder--which is also correct--but the path written to the AviSynth script file is the "Default Output Directory" which to me is wrong, as the script throws an error because the indexed video file is in a different folder. Hope this makes sense...

Edit: After deep, painful contemplation, I now understand why: The script's source is for the index file--not the video file--so the path is correct. I am an Eye-Die-Ott, and am also with myself :stupid:

[LouieChuckyMerry]

Hello. I'm using MeGUI 2908 set to "Use Auto Update", but the updates don't "stick". A few days ago it updated a couple things but I didn't notice exactly what. Yesterday upon restart it updated FFMpeg, MKVMerge, and QAAC, but I didn't take note of the versions. Today upon a restart it updated FFMpeg from v4.1.1 to v4.1.3, MKVMerge from v32.0.0 to v34.0.0, and QAAC from v2.67 to v2.68; however, if I hit "Ctrl+U" all three packages are back to their pre-update versions. Thanks for any help.

P.S.--Any input on my last post (https://forum.doom9.org/showthread.php?p=1874555#post1874555) about the "Options/Default Output Directory" path for the .avs file being wrong? Thanks :) .

[Taurus]

Hello. I'm using MeGUI 2908 set to "Use Auto Update", but the updates don't "stick". A few days ago it updated a couple things but I didn't notice exactly what. Yesterday upon restart it updated FFMpeg, MKVMerge, and QAAC, but I didn't take note of the versions. Today upon a restart it updated FFMpeg from v4.1.1 to v4.1.3, MKVMerge from v32.0.0 to v34.0.0, and QAAC from v2.67 to v2.68; however, if I hit "Ctrl+U" all three packages are back to their pre-update versions.

Same here...
Whenever I open MeGui it happily updates the three binaries.
Next time opening MeGui it switches back to older versions.
Next time to newer versions and so on and so on......:D
Funny game...

[LouieChuckyMerry]

The update issue seems to have fixed itself. Perhaps Zathor used his super powers ;) ...

[Barough]

New stable x265 version available
x265 v3.0+3-566b05ac7721 (Stable) (https://www.mediafire.com/file/o4bxxym97nnbej8/x265-3.0+3-566b05ac7721_Stable_Win_GCC910.7z/file)


x265 v3.1 is around the corner also.

[StainlessS]

Non catastrophic bug, see EDIT here:- https://forum.doom9.org/showthread.php?p=1876445#post1876445

EDIT: to below.
OK got it G2K4. Nice bit of code you posted there,
if (sizeof(void*) == 8) // Test 64 on 64
easy when you know how.

EDIT: Yep, got that as well. thanx again boss.

[Groucho2004]

Non catastrophic bug, see EDIT here:- https://forum.doom9.org/showthread.php?p=1876445#post1876445
See here (https://forum.doom9.org/showthread.php?p=1845356#post1845356).

[Groucho2004]

Non catastrophic bug, see EDIT here:- https://forum.doom9.org/showthread.php?p=1876445#post1876445
...
OK got it G2K4.My point was that Zathor is aware of this as you can see a few posts down but decided to stick with the current implementation.

[laurentje]

I want to convert my dv avi-files (from my Pana GS500) to mkv-files. Therefore I use One-click function of Megui.
From the moment I drag the file name in the input-field into the field "Input" I get a "Warning" in the log.

See my log here (see attachment 1).
In the dialog screen I get the following (see attachment 2)

In the field Delay (Audio tap) you see a value of 2205360, which is wrong and should be 0.

When I go on (with the given value), finally the program produce an mkv and video and audio are not synchronized.

So I am thinking this is a bug, or I am doing something wrong with my dv avi-file? What is the best way to convert dv avi to mkv (avc)?

Any help is much appreciated.

PS
Afterwards I clicked on help and on that Wikipage on the first line I read: "The One Click Encoder aims to allow a single job configuration in one step, followed by a completed automated encode. It currently only works with MPEG-2 sources (in particular, DVDs)." So my file is not MPEG-2, it is dv avi. I should use other soft.

[LigH]

Just to have it mentioned: I know three different ways to use MeGUI. One is the manual use of the main tab to fill the queue, step by step.

But yes, for this rather simple task, VirtualDub2 may be just sufficient.

[hello_hello]

laurentje,
Try opening an AVI with MeGUI's MKV muxer, or with MKVToolNixGUI, repack the AVI as an MKV, then use that as the source. The problem will probably go away, although it's not ideal if you've got lots of AVIs to convert.

[Barough]

MP4Box v0.8.0-rev8-g3fc6b0e17 (http://www.mediafire.com/file/14rgpw04mgg01tm/MP4Box-0.8.0-rev8-g3fc6b0e17_Win_GCC910.7z/file)

x265 v3.1+7-147fb92c5ed5 (http://www.mediafire.com/file/1a9q2qjfusbvi9p/x265-3.1%252B7-147fb92c5ed5_Win_GCC910.7z/file)

[Barough]

x264 0.158.2984 3759fcb (https://www.mediafire.com/file/gtxnnyxeidlc3tn/x264-0.158.2984_3759fcb_Win_GCC910.7z/file)

[LouieChuckyMerry]

x264 0.158.2984 3759fcb (https://www.mediafire.com/file/gtxnnyxeidlc3tn/x264-0.158.2984_3759fcb_Win_GCC910.7z/file)

Thanks :thanks: , and Happy Friday!

[Bazzu85]

guys, I'm new here but using Megui from a while..

I'm noticing that the internal update is not fetching anything new..

for example I have x265 in version 2.9+1 with date 08/10/2018..

is normal to not have auto update?

[tebasuna51]

...I have x265 in version 2.9+1 with date 08/10/2018..

is normal to not have auto update?

MeGUI -> Options -> Extended -> Auto Update -> Use developement update server

Last stable release is from 12/2018, in development server x265 is 3.0+4 (LigH).

Or download latest versions (http://msystem.waw.pl/x265/) at your risk

[Bazzu85]

MeGUI -> Options -> Extended -> Auto Update -> Use developement update server

Last stable release is from 12/2018, in development server x265 is 3.0+4 (LigH).

Or download latest versions (http://msystem.waw.pl/x265/) at your risk

thx for made it clear! :D

another question..
Having a mkv with 2 audio and 3 subs (italian forced, italian, english)
when muxing into the destination file sometimes I have a warning that says: Ignoring subtitle track as it is too small

this is correct because maybe the forced sub is an empty track..
the problem is that the results as no subs at all. the program ignore all the subs track and not only the one empy..

[tebasuna51]

Yes, seems than the error: Ignoring subtitle track as it is too small
abort all the subtitle management.

It is a bug for Zathor, maybe after holidays...

[Barough]

MP4Box v0.8.0-rev41-gb78fe5fbe (http://www.mediafire.com/file/x1709xl2a7tdyz4/MP4Box-0.8.0-rev41-gb78fe5fbe_Win_GCC910.7z/file)
https://github.com/gpac/gpac

x265 v3.1+10-459d3822c608 (http://www.mediafire.com/file/nnxk5mj74ww3741/x265-3.1%252B10-459d3822c608_Win_GCC910.7z/file)
https://bitbucket.org/multicoreware/x265/commits/branch/default

[kuchikirukia]

Would it be possible to prepend the One-Click's random working directory names with the job number so they're in some sort of order?

[Bazzu85]

Yes, seems than the error: Ignoring subtitle track as it is too small
abort all the subtitle management.

It is a bug for Zathor, maybe after holidays...

good, I 've to report the bug somewhere?

[tebasuna51]

Here is ok.

[Octo-puss]

Please add the possibility to close any windows with Esc key.

[stax76]

MP4Box v0.8.0-rev41-gb78fe5fbe (http://www.mediafire.com/file/x1709xl2a7tdyz4/MP4Box-0.8.0-rev41-gb78fe5fbe_Win_GCC910.7z/file)
https://github.com/gpac/gpac

x265 v3.1+10-459d3822c608 (http://www.mediafire.com/file/nnxk5mj74ww3741/x265-3.1%252B10-459d3822c608_Win_GCC910.7z/file)
https://bitbucket.org/multicoreware/x265/commits/branch/default

Thanks :thanks:

[pooksahib]

Hi. If I have 2 videos of the same size and type, I'll use megui to create the script for the first video. The name given to the script will be in the form 'vid1.mp4.avs'.

For the 2nd video, I'll simply copy/paste the existing script and change the source. Sometimes, though, I'm careless and will call the pasted script 'vid2.avs' instead of 'vid2.mp4.avs'.

In that situation, as soon as I click 'start' a message pops up saying 'output file xxx already exists, do you want to overwrite?' Whether I say Yes or No, my source video gets deleted!

Is this a bug? Is there any way of aborting without deleting the source video? Thank you.

[Zathor]

2911 [OneClick] fixed an error when switching profile settings. Bug #946
2910 [Updater] added support for Visual C++ 2019 redist files
2909 [OneClick] fixed not applying "automatic deinterlacing" filters. Bug #945 (regression of 2887)

[Zetti]

Good to see you back Zathor.

With some of the newest versions of DGIndexNV, the Crop option is grayed out.

https://i.imgsafe.org/70/70985ae877.png

[tebasuna51]

Work for me (DGIndexNV 2053.169), check the 'Nvidia Crop & Resize' in the image, add Crop and Resize in I/O tab, and in Script tab is reflected fine, example:

DGSource("D:\Temp\test.dgi", ct=24, cb=24, cl=0, cr=0, rw=720, rh=384)

[Zetti]

I was tired, i meant of course the Deinterlacer option.

[tebasuna51]

You are right, even after execute 'Analyse' and detected like 'Interlaced' the Nvidia Deinterlacer remains grayed out.

[imsrk48]

[Feature Request] Add Option for Keep Screen on During Encoding.

Sent from my LG-M700 using Tapatalk

[imsrk48]

[BUG] MeGUI Not Supporting MJPEG Codec.

Please Fix This and If MJPEG Not Supported in MeGUI Please Support That.[emoji120]

Sent from my LG-M700 using Tapatalk

[LigH]

Support for encoding or for decoding?

Decoding MJPEG is supported. Either via AviSource, if you installed a VfW codec in your Windows, or via indexer (both FFMS2 and L-SMASH Works use libav cores).

Encoding to MJPEG AVI is not quite the main purpose of MeGUI, it is not a very efficient codec. I doubt many people would chose MJPEG to encode a video copy of a cinematic movie from a DVD or Blu-ray source. To produce an AVI with MJPEG video, using e.g. VirtualDub2 is a lot more convenient.

[LouieChuckyMerry]

good to see you back zathor.

+1 :) .

[imsrk48]

Support for encoding or for decoding?

Decoding MJPEG is supported. Either via AviSource, if you installed a VfW codec in your Windows, or via indexer (both FFMS2 and L-SMASH Works use libav cores).

Encoding to MJPEG AVI is not quite the main purpose of MeGUI, it is not a very efficient codec. I doubt many people would chose MJPEG to encode a video copy of a cinematic movie from a DVD or Blu-ray source. To produce an AVI with MJPEG video, using e.g. VirtualDub2 is a lot more convenient.Okay Sir Thanks

[Barough]

MediaInfo v19.09 (https://mediaarea.net/en/MediaInfo/Download/Windows)
x265 v3.2 (https://forum.doom9.org/showpost.php?p=1885717&postcount=7053)

[imsrk48]

MeGUI Taking too Much time to Opening or Encoding AAC DD5.1 (ADTS codec)

[tebasuna51]

MeGUI Taking too Much time to Opening or Encoding AAC DD5.1 (ADTS codec)

Please put your log like this:

...
---[NoImage] LoadPlugin("C:\Portable\MeGUI64\tools\lsmash\LSMASHSource.dll")
---[NoImage] LWLibavAudioSource("D:\Test\AudioD\Samples\ac3\6a321.ac3")
---[NoImage] # detected channels: 6
---[NoImage] # detected channel positions: 3/2/0.1
---[NoImage] return last
--[Information] [27/09/2019 15:02:32] Command line used: --ignorelength --threading -V 100 - -o "{0}"
--[Information] [27/09/2019 15:02:32] AviSynth script environment opened
--[Information] [27/09/2019 15:02:33] Script loaded
--[Information] [27/09/2019 15:02:33] Output Decoder
---[Information] [27/09/2019 15:02:33] Channels: 6
---[Information] [27/09/2019 15:02:33] Bits per sample: 32
---[Information] [27/09/2019 15:02:33] Sample rate: 48000
--[Information] [27/09/2019 15:02:33] Job command line: C:\Portable\MeGUI64\tools\qaac\qaac.exe --ignorelength --threading -V 100 - -o "C:\tmp\6a321_new.m4a"
--[Information] [27/09/2019 15:02:34] Process started
--[Information] [27/09/2019 15:02:34] Standard output stream
--[Information] [27/09/2019 15:02:34] Standard error stream
---[Information] [27/09/2019 15:02:34] qaac 2.68, CoreAudioToolbox 7.10.9.0
---[Information] [27/09/2019 15:02:34] 6a321_new.m4a
---[Information] [27/09/2019 15:02:34] AAC-LC Encoder, TVBR q100, Quality 96
---[Information] [27/09/2019 15:02:34] 961536/-1 samples processed in 0:00.546
---[Information] [27/09/2019 15:02:34] Overall bitrate: 93.8726kbps
---[Information] [27/09/2019 15:02:34] Optimizing...done
--[Information] [27/09/2019 15:02:35] MediaInfo
...

[imsrk48]

Please put your log like this:I'm unable to post .log files using Tapatalk app

[imsrk48]

Please put your log like this:How Buddy?

[tebasuna51]

How Buddy?

Check in your ...\megui\logs\ folder.

[imsrk48]

Check in your ...\megui\logs\ folder.that's not my question I'm asking how to upload .log file via Tapatalk app

[LigH]

Why Tapatalk? Can't you use a normal PC web browser? Or is your PC where MeGUI runs "offline", not connected to the internet?

[imsrk48]

Why Tapatalk? Can't you use a normal PC web browser? Or is your PC where MeGUI runs "offline", not connected to the internet?Yes that is runs offline but this time i have connected net

[imsrk48]

Sir I Want to Post My Log File But I Don't Know where to do this in web browser