MeGUI: bug reports and feature requests

[wthreex]

We have 2audio at the same time like this :


#1: English 1.0ch FLAC
#2: English 1.0ch AAC @ 192 Kbps (Commentary by Michael Powell and Martin Scorsese)

if we encode with "nero aac", Megui choose "Commentary track" for defaul track audio, when this happened ? when commentary track and audio encoder is = AAC

This is one of the oldest bug in megui, and hope the problem is resolved in future updates. thanks.

[Zathor]

After updating MeGUI to 2748 and x264 to r2833, MeGUI claimed it couldn't find 10 bit x264 & embarked on a never ending request to install it. Even when I told it not to, every time I started an encoding job the updater would open and try to re-install it. I'm using the 8 bit version though. I just thought I'd mention that in case it's not expected behaviour, but the x86 version of 10 bit x264 is named "x264-10b.exe.exe".
Removing the additional ".exe" from the file name stopped MeGUI from wanting to re-install it.
Thanks, fixed

[Zathor]

Every time I uncheck and check "Use x64tools if possible" option, it "extracts" the tools.
Does it have to re-extract them everytime I switch between 32-bit and 64-bit?
This is necessary as the 32bit and 64bit share usually the same file name. So if you select 32bit the 32bit ones have to be extracted (+ downloaded if not available yet). If you switch to 64bit the 64bit files have to extracted to replace the 32bit ones. Out of interest - why do you switch between them so often?

Could we not have the entire "Add pre-rendering job" text be an active selection area for the checkbox? I find myself accidentally clicking there and wasting hours filling my drive a little too often.
What do you mean with "active selection"? A message box to pop-up as a warning? Or to hide it by default?

Zeranoe's FFmpeg v3.3.1 is available now
https://ffmpeg.zeranoe.com/builds/
MediaInfo v0.7.96 is released.
Thanks, updated!

We have 2audio at the same time like this :


#1: English 1.0ch FLAC
#2: English 1.0ch AAC @ 192 Kbps (Commentary by Michael Powell and Martin Scorsese)

if we encode with "nero aac", Megui choose "Commentary track" for defaul track audio, when this happened ? when commentary track and audio encoder is = AAC

This is one of the oldest bug in megui, and hope the problem is resolved in future updates. thanks.
Please provide more details. I do not know where you do have that problem (OneClick) and how to reproduce it. Also a (small) sample file would be nice.

[dissory]

@Zathor,

Is this something that can be fixed regarding the shift in audio track positions?


Also with the files mediainfos I posted before, the input file is FLAC1, FLAC2, AAC but output becomes FLAC1-transcoded, AAC, FLAC2-transcoded?

Is there a reason why the audio tracks shift position in the output file? If not, would be nice to keep it in the same positions as the input file

[Zathor]

@Zathor,

Is this something that can be fixed regarding the shift in audio track positions?

How is it shown in the OneClick GUI? Are the tracks there in your desired order?
if yes, please upload a (short) sample file with your MeGUI profiles.

[Zathor]

2754 [MKV Info] switched to the JSON format as the old switch is deprecated (requires mkvmerge 9.7+)
2753 [Chapter] improved chapter handling
all MediaInfo supported files and TXT/XML files can be used as chapter files
!!! existing jobs have to be recreated as otherwise the chapter information will not be added !!!
[Muxer] use chapter information from the input video file if available
[Muxer] + [OneClick] disable/enable the chapter selection box based upon the selected container and device type
2752 [MKV Muxer] ignore invalid subtitle files
2751 [HD Streams Extractor] improved handling of audio tracks with unknown parameters
2750 [Worker] fixed rare invisible progress window (regression of 2743)
2749 [Update] fixed a rare crash when a restart is required and MeGUI is already closed
Especially please test the chapter handling. I could likely not test all use cases.

[locotus]

Hi all:

Seems that after the last couples of updates downmix multichannel to stereo is
somehow deprecated, although conversion don't crash it last forever and must be cancel.
No problem in doing the downmix outside Megui, with the Eac3to in Megui folder.

Thanks.

[Zathor]

Thanks for the report. Could you please post a log and/or more details? I did several 5.1 to 2.0 encodes and all of them worked.

[locotus]

Here the log for the audio part of the encoding: (1st part)

-[Information] Log for job5 (audio, Audio File 1 - [0] English.dts -> Audio File 1 - [0] English.ac3)
--[Information] [6/5/2017 9:43:07 PM] Started handling job
--[Information] [6/5/2017 9:43:07 PM] Preprocessing
--[Information] [6/5/2017 9:43:07 PM] MediaInfo
---[Information] [6/5/2017 9:43:07 PM] File: C:\En Proceso\Audio File 1 - [0] English.dts
---[Information] General
----[Information] Format: DTS
----[Information] FormatString: DTS
----[Information] FileSize: 540955374
----[Information] PlayTime: 01:35:35.776
---[Information] Audio
----[Information] ID:
----[Information] StreamOrder:
----[Information] Format: DTS
----[Information] FormatProfile:
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 kHz
----[Information] Channels: 6
----[Information] ChannelsString: 6 channels
----[Information] ChannelPositionsString2: 3/2/0.1
----[Information] BitRateMode: CBR
----[Information] Delay:
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default:
----[Information] DefaultString:
----[Information] Forced:
----[Information] ForcedString:
----[Information] [6/5/2017 9:43:07 PM] The language information is not available for this track. The default MeGUI language has been selected.
--[Information] [6/5/2017 9:43:07 PM] Trying to open the file with LWLibavAudioSource()
--[Information] [6/5/2017 9:43:15 PM] Successfully opened the file with LWLibavAudioSource()
--[Information] [6/5/2017 9:43:23 PM] AviSynth script
---[NoImage] ClearAutoloadDirs()
---[NoImage] AddAutoloadDir("C:\MeGui\tools\avs\plugins")
---[NoImage] LoadPlugin("C:\MeGui\tools\lsmash\LSMASHSource.dll")
---[NoImage] LWLibavAudioSource("C:\En Proceso\Audio File 1 - [0] English.dts")
---[NoImage] # detected channels: 6
---[NoImage] # detected channel positions: 3/2/0.1
---[NoImage] LoadPlugin("C:\MeGui\tools\avisynth_plugin\AudioLimiter.dll")
---[NoImage] c6_stereo(ConvertAudioToFloat(last))
---[NoImage] Normalize()
---[NoImage] 32==Audiobits(last)?ConvertAudioTo16bit(last):last
---[NoImage] return last
---[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> stereo + LFE
---[NoImage] function c6_stereo(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] lf = GetChannel(a, 4)
---[NoImage] sl = GetChannel(a, 5)
---[NoImage] sr = GetChannel(a, 6)
---[NoImage] fl_sl = MixAudio(fl, sl, 0.2929, 0.2929)
---[NoImage] fr_sr = MixAudio(fr, sr, 0.2929, 0.2929)
---[NoImage] fc_lf = MixAudio(fc, lf, 0.2071, 0.2071)
---[NoImage] l = MixAudio(fl_sl, fc_lf, 1.0, 1.0)
---[NoImage] r = MixAudio(fr_sr, fc_lf, 1.0, 1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5 Channels L,R,C,SL,SR or L,R,LFE,SL,SR-> Stereo
---[NoImage] function c5_stereo(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] sl = GetChannel(a, 4)
---[NoImage] sr = GetChannel(a, 5)
---[NoImage] fl_sl = MixAudio(fl, sl, 0.3694, 0.3694)
---[NoImage] fr_sr = MixAudio(fr, sr, 0.3694, 0.3694)
---[NoImage] l = MixAudio(fl_sl, fc, 1.0, 0.2612)
---[NoImage] r = MixAudio(fr_sr, fc, 1.0, 0.2612)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5 Channels L,R,C,LFE,S -> Stereo
---[NoImage] function c52_stereo(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] lf = GetChannel(a, 4)
---[NoImage] bc = GetChannel(a, 5)
---[NoImage] fl_bc = MixAudio(fl, bc, 0.3205, 0.2265)
---[NoImage] fr_bc = MixAudio(fr, bc, 0.3205, 0.2265)
---[NoImage] fc_lf = MixAudio(fc, lf, 0.2265, 0.2265)
---[NoImage] l = MixAudio(fl_bc, fc_lf, 1.0, 1.0)
---[NoImage] r = MixAudio(fr_bc, fc_lf, 1.0, 1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 4 Channels Quadro L,R,SL,SR -> Stereo
---[NoImage] function c4_stereo(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] sl = GetChannel(a, 3)
---[NoImage] sr = GetChannel(a, 4)
---[NoImage] l = MixAudio(fl, sl, 0.5, 0.5)
---[NoImage] r = MixAudio(fr, sr, 0.5, 0.5)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 4 Channels L,R,C,LFE or L,R,S,LFE or L,R,C,S -> Stereo
---[NoImage] function c42_stereo(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] lf = GetChannel(a, 4)
---[NoImage] fc_lf = MixAudio(fc, lf, 0.2929, 0.2929)
---[NoImage] l = MixAudio(fl, fc_lf, 0.4142, 1.0)
---[NoImage] r = MixAudio(fr, fc_lf, 0.4142, 1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 3 Channels L,R,C or L,R,S or L,R,LFE -> Stereo
---[NoImage] function c3_stereo(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] l = MixAudio(fl, fc, 0.5858, 0.4142)
---[NoImage] r = MixAudio(fr, fc, 0.5858, 0.4142)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> Dolby ProLogic
---[NoImage] function c6_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] sl = GetChannel(a, 5)
---[NoImage] sr = GetChannel(a, 6)
---[NoImage] bc = MixAudio(sl, sr, 0.2265, 0.2265)
---[NoImage] fl_fc = MixAudio(fl, fc, 0.3205, 0.2265)
---[NoImage] fr_fc = MixAudio(fr, fc, 0.3205, 0.2265)
---[NoImage] l = MixAudio(fl_fc, bc, 1.0, 1.0)
---[NoImage] r = MixAudio(fr_fc, bc, 1.0, -1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5 Channels L,R,C,SL,SR -> Dolby ProLogic
---[NoImage] function c5_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] sl = GetChannel(a, 4)
---[NoImage] sr = GetChannel(a, 5)
---[NoImage] bc = MixAudio(sl, sr, 0.2265, 0.2265)
---[NoImage] fl_fc = MixAudio(fl, fc, 0.3205, 0.2265)
---[NoImage] fr_fc = MixAudio(fr, fc, 0.3205, 0.2265)
---[NoImage] l = MixAudio(fl_fc, bc, 1.0, 1.0)
---[NoImage] r = MixAudio(fr_fc, bc, 1.0, -1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5 Channels L,R,LFE,SL,SR -> Dolby ProLogic
---[NoImage] function c52_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] sl = GetChannel(a, 4)
---[NoImage] sr = GetChannel(a, 5)
---[NoImage] bc = MixAudio(sl, sr, 0.2929, 0.2929)
---[NoImage] l = MixAudio(fl, bc, 0.4142, 1.0)
---[NoImage] r = MixAudio(fr, bc, 0.4142, -1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5 Channels L,R,C,LFE,S -> Dolby ProLogic
---[NoImage] function c53_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] bc = GetChannel(a, 5)
---[NoImage] fl_fc = MixAudio(fl, fc, 0.4142, 0.2929)
---[NoImage] fr_fc = MixAudio(fr, fc, 0.4142, 0.2929)
---[NoImage] l = MixAudio(fl_fc, bc, 1.0, 0.2929)
---[NoImage] r = MixAudio(fr_fc, bc, 1.0, -0.2929)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 4 Channels Quadro L,R,SL,SR -> Dolby ProLogic
---[NoImage] function c4_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] sl = GetChannel(a, 3)
---[NoImage] sr = GetChannel(a, 4)
---[NoImage] bc = MixAudio(sl, sr, 0.2929, 0.2929)
---[NoImage] l = MixAudio(fl, bc, 0.4142, 1.0)
---[NoImage] r = MixAudio(fr, bc, 0.4142, -1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 4 Channels L,R,LFE,S -> Dolby ProLogic
---[NoImage] function c42_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] bc = GetChannel(a, 4)
---[NoImage] l = MixAudio(fl, bc, 0.5858, 0.4142)
---[NoImage] r = MixAudio(fr, bc, 0.5858, -0.4142)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 4 Channels L,R,C,S -> Dolby ProLogic
---[NoImage] function c43_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] bc = GetChannel(a, 4)
---[NoImage] fl_fc = MixAudio(fl, fc, 0.4142, 0.2929)
---[NoImage] fr_fc = MixAudio(fr, fc, 0.4142, 0.2929)
---[NoImage] l = MixAudio(fl_fc, bc, 1.0, 0.2929)
---[NoImage] r = MixAudio(fr_fc, bc, 1.0, -0.2929)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 3 Channels L,R,S -> Dolby ProLogic
---[NoImage] function c3_dpl(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] bc = GetChannel(a, 3)
---[NoImage] l = MixAudio(fl, bc, 0.5858, 0.4142)
---[NoImage] r = MixAudio(fr, bc, 0.5858, -0.4142)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> Dolby ProLogic II
---[NoImage] function c6_dpl2(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] sl = GetChannel(a, 5)
---[NoImage] sr = GetChannel(a, 6)
---[NoImage] ssl = MixAudio(sl, sr, 0.2818, 0.1627)
---[NoImage] ssr = MixAudio(sl, sr, -0.1627, -0.2818)
---[NoImage] fl_fc = MixAudio(fl, fc, 0.3254, 0.2301)
---[NoImage] fr_fc = MixAudio(fr, fc, 0.3254, 0.2301)
---[NoImage] l = MixAudio(fl_fc, ssl, 1.0, 1.0)
---[NoImage] r = MixAudio(fr_fc, ssr, 1.0, 1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5 Channels L,R,C,SL,SR -> Dolby ProLogic II
---[NoImage] function c5_dpl2(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] fc = GetChannel(a, 3)
---[NoImage] sl = GetChannel(a, 4)
---[NoImage] sr = GetChannel(a, 5)
---[NoImage] ssl = MixAudio(sl, sr, 0.2818, 0.1627)
---[NoImage] ssr = MixAudio(sl, sr, -0.1627, -0.2818)
---[NoImage] fl_fc = MixAudio(fl, fc, 0.3254, 0.2301)
---[NoImage] fr_fc = MixAudio(fr, fc, 0.3254, 0.2301)
---[NoImage] l = MixAudio(fl_fc, ssl, 1.0, 1.0)
---[NoImage] r = MixAudio(fr_fc, ssr, 1.0, 1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 5 Channels L,R,LFE,SL,SR -> Dolby ProLogic II
---[NoImage] function c52_dpl2(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] sl = GetChannel(a, 4)
---[NoImage] sr = GetChannel(a, 5)
---[NoImage] ssl = MixAudio(sl, sr, 0.3714, 0.2144)
---[NoImage] ssr = MixAudio(sl, sr, -0.2144, -0.3714)
---[NoImage] l = MixAudio(fl, ssl, 0.4142, 1.0)
---[NoImage] r = MixAudio(fr, ssr, 0.4142, 1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
---[NoImage] # 4 Channels Quadro L,R,SL,SR -> Dolby ProLogic II
---[NoImage] function c4_dpl2(clip a)
---[NoImage] {
---[NoImage] fl = GetChannel(a, 1)
---[NoImage] fr = GetChannel(a, 2)
---[NoImage] sl = GetChannel(a, 3)
---[NoImage] sr = GetChannel(a, 4)
---[NoImage] ssl = MixAudio(sl, sr, 0.3714, 0.2144)
---[NoImage] ssr = MixAudio(sl, sr, -0.2144, -0.3714)
---[NoImage] l = MixAudio(fl, ssl, 0.4142, 1.0)
---[NoImage] r = MixAudio(fr, ssr, 0.4142, 1.0)
---[NoImage] return MergeChannels(l, r)
---[NoImage] }
--[Information] [6/5/2017 9:43:23 PM] Command line used: -i - -y -acodec ac3 -ab 192k "{0}"
--[Information] [6/5/2017 9:43:23 PM] AviSynth script environment opened
--[Information] [6/5/2017 9:43:32 PM] Script loaded
--[Information] [6/5/2017 9:43:32 PM] Output Decoder
---[Information] [6/5/2017 9:43:32 PM] Channels: 2
---[Information] [6/5/2017 9:43:32 PM] Bits per sample: 16
---[Information] [6/5/2017 9:43:32 PM] Sample rate: 48000
--[Information] [6/5/2017 9:43:32 PM] Job command line: C:\MeGui\tools\ffmpeg\ffmpeg.exe -i - -y -acodec ac3 -ab 192k "C:\En proceso\Audio File 1 - [0] English.ac3"
--[Information] [6/5/2017 9:43:32 PM] Process started
--[Information] [6/5/2017 9:43:32 PM] Standard output stream
--[Information] [6/5/2017 9:43:32 PM] Standard error stream
---[Information] [6/5/2017 9:43:32 PM] ffmpeg version 3.3.1 Copyright (c) 2000-2017 the FFmpeg developers
---[Information] [6/5/2017 9:43:32 PM] built with gcc 6.3.0 (GCC)
---[Information] [6/5/2017 9:43:32 PM] configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
---[Information] [6/5/2017 9:43:32 PM] libavutil 55. 58.100 / 55. 58.100
---[Information] [6/5/2017 9:43:32 PM] libavcodec 57. 89.100 / 57. 89.100
---[Information] [6/5/2017 9:43:32 PM] libavformat 57. 71.100 / 57. 71.100
---[Information] [6/5/2017 9:43:32 PM] libavdevice 57. 6.100 / 57. 6.100
---[Information] [6/5/2017 9:43:32 PM] libavfilter 6. 82.100 / 6. 82.100
---[Information] [6/5/2017 9:43:32 PM] libswscale 4. 6.100 / 4. 6.100
---[Information] [6/5/2017 9:43:32 PM] libswresample 2. 7.100 / 2. 7.100
---[Information] [6/5/2017 9:43:32 PM] libpostproc 54. 5.100 / 54. 5.100
---[Information] [6/5/2017 9:50:01 PM] Guessed Channel Layout for Input Stream #0.0 : stereo
---[Information] [6/5/2017 9:50:01 PM] Input #0, wav, from 'pipe:':
---[Information] [6/5/2017 9:50:01 PM] Duration: N/A, bitrate: 1536 kb/s
---[Information] [6/5/2017 9:50:01 PM] Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 48000 Hz, stereo, s16, 1536 kb/s

[locotus]

Here the 2nd and final part:


---[Information] [6/5/2017 9:50:01 PM] Stream mapping:
---[Information] [6/5/2017 9:50:01 PM] Stream #0:0 -> #0:0 (pcm_s16le (native) -> ac3 (native))
---[Information] [6/5/2017 9:50:01 PM] Output #0, ac3, to 'C:\En proceso\Audio File 1 - [0] English.ac3':
---[Information] [6/5/2017 9:50:01 PM] Metadata:
---[Information] [6/5/2017 9:50:01 PM] encoder : Lavf57.71.100
---[Information] [6/5/2017 9:50:01 PM] Stream #0:0: Audio: ac3, 48000 Hz, stereo, fltp, 192 kb/s
---[Information] [6/5/2017 9:50:01 PM] Metadata:
---[Information] [6/5/2017 9:50:01 PM] encoder : Lavc57.89.100 ac3
---[Information] [6/5/2017 10:08:41 PM] video:0kB audio:108934kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.000000%
--[Information] [6/5/2017 10:08:41 PM] Aborting...
--[Information] Deleting aborted output
---[Information] [6/5/2017 10:08:41 PM] Delete aborted output set: True
--[Information] [6/5/2017 10:08:41 PM] Job completed
--[Information] [6/5/2017 10:08:41 PM] Current job was aborted

[Zathor]

Mhm, for me it does work. However it seems to be a bit slow. Could you please upload also your "versions" block of the log?

[locotus]

Here the version block.

Information] Log
-[Information] Versions
--[Information] MeGUI: 2755 x86
--[Information] System Information
---[Information] Operating System: Windows 10 Home 1607 x64 (10.0.14393.1198)
---[Information] .NET Framework: 4.0 (4.0.0.0)
---[Information] .NET Framework: 4.7 (4.7.02053)
--[Information] Component Information
---[Information] Haali Media Splitter: 1.13.138.14 (14-04-2013)
---[Information] Haali DSS2: (14-04-2013)
---[Information] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
---[Information] MediaInfo: 0.7.96.0 (01-06-2017)
---[Information] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
---[Information] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
---[Information] 7z: 9.20 (18-11-2010)
--[Information] AviSynth Information
---[Information] AviSynth Wrapper
----[Information] Version: 1.0.2721.0
----[Information] Date: 29-04-2017
----[Information] Interface: 3
---[Information] AviSynth
----[Information] File Version: 2.5.8.5
----[Information] Date: 21-12-2008
----[Information] Name: Avisynth 2.5
----[Information] Version: AviSynth 2.58, build:Dec 22 2008 [08:46:51]
----[Information] AviSynth+: false
----[Information] MT: false
----[Information] Status: Installed AviSynth build is out of date.
---[Information] AviSynth portable
----[Information] File Version: 0.1
----[Information] Date: 03-06-2017
----[Information] Name: AviSynth+ 0.1 (r2504, MT, i386)
----[Information] Version: AviSynth+ 0.1 (r2504, MT, i386)
----[Information] AviSynth+: true
----[Information] MT: true
----[Information] Status: active
-[Information] Update detection
--[Information] [6/5/2017 7:04:33 PM] Using cached update config and server: http://megui.org/auto/
--[Information] [6/5/2017 7:04:33 PM] No package requires an update
--[Information] [6/5/2017 10:33:59 PM] Marked file as obsolete: megui-core-2754-32.7z

[Thunderbolt8]

would it be possible to implement better x265 GUI support? currently you can only choose between the presents or use the cmd line. there are no nice windows with knobs to play with (for people unfamiliar with the cmd line options) like there are in case with x264

[LigH]

I believe, previously Zathor hesitated to implement more basic parameters while x265 was in heavy development, and the set of command line options changing a lot. Already in v2.4 now, I hope that the most common parameters are quite stable now, I would dare him to be a little bolder too. ;)

[sneaker_ger]

It doesn't really make much sense. There are a bazillion "knobs". People who are too lazy to read the documentation and just want "to play" will only shoot themselves in the foot.

[LigH]

Then why did it make sense to support so many for x264?

I don't recommend to implement all of them. There is still the "custom command line". But a few commonly used, similar to x264, could be added?

[sneaker_ger]

Then why did it make sense to support so many for x264?
Who said it did? :p

(though I believe x265 is more complicated than x264)

[Thunderbolt8]

It doesn't really make much sense. There are a bazillion "knobs". People who are too lazy to read the documentation and just want "to play" will only shoot themselves in the foot.well "to play" was rather poorly worded. Im just looking for some rather basic stuff like deblocking options to set, number of reference frames and blu-ray compatibility. these could be useful even for people knowing not that much about encoding.

[hello_hello]

I'll confess I like the way the advanced options are implemented in the x264 encoder configuration, because when you change a speed preset or tuning etc the appropriate advanced options are changed to their new defaults, making it easy to see which settings they use. If ever I need to know for some reason but I can't remember, that's where I look.

[LouieChuckyMerry]

Hi Zathor, I hope you're well :) . Please, would you return "L-SMASH Works" as an indexing option for VC-1 video? It used to be possible but currently it's grayed-out. Thank you.

[Zathor]

Please, would you return "L-SMASH Works" as an indexing option for VC-1 video? It used to be possible but currently it's grayed-out. Thank you.
Sadly it is disabled as it is not working anymore:
https://github.com/VFR-maniac/L-SMASH-Works/issues/58

[LouieChuckyMerry]

Sadly it is disabled as it is not working anymore:
https://github.com/VFR-maniac/L-SMASH-Works/issues/58

That's interesting. Some years ago (Edit: it was May 2015) when I first tried to encode VC-1 video with MeGUI I had trouble with both FFMS and L-SMASH. Muxing the VC-1 as an .mkv led to artifacts in the output using either indexer. However, after much trial and error, I learned that muxing VC-1 as a .ts file then indexing with L-SMASH output artifact-free video (not the case with VC-1/.ts and FFMS; this output still had artifacts). So that's been my goto method for VC-1 sources. It's been about a year since last I did this, but a couple new-to-me Blu-rays are VC-1 and I'm again encountering artifacts using FFMS and .mkv. I realize that this isn't an issue with MeGUI, and it might not even be an issue with FFMS but instead an issue with my specific setup (multi-threading, perhaps?). If it comes to it I could single-thread any new VC-1 sources, but I'd prefer not to. Is there any way in MeGUI you can still have VC-1 video defualt to FFMS but also allow L-SMASH as an option? I find myself curious to check if VC-1/.ts/L-SMASH still works for me. Or is there any way you know to index a VC-1/.ts with L-SMASH independent of MeGUI (not to veer off-topic ;) ). Thanks for your help.

[hello_hello]

LouieChuckyMerry,
Both FFMs and L-Smash will index automatically if no index file is found. Simply create a script yourself such as
LWLibavVideoSource("D:\video.mkv")
and video.mkv will be indexed the first time you run it.

Are you limiting ffms2 to a single thread (there's an option in MeGUI's settings)? In my experience it fixes a lot of ffms2 problems. ie
FFVideoSource("D:\video.mkv", threads=1)
and remove any fpsnum & fpsden stuff MeGUI is adding to the script for ffms2 if you haven't tried it already.

[LouieChuckyMerry]

LouieChuckyMerry,
Both FFMs and L-Smash will index automatically if no index file is found. Simply create a script yourself such as
LWLibavVideoSource("D:\video.mkv")
and video.mkv will be indexed the first time you run it.

I'll try this as soon as I can demux then remux the videos as .ts files. Thanks :) .

Update: After indexing several of the VC-1/.ts files with FFMS, then changing the "LoadPlugin()" line from ffms2.dll to LSMASHSource.dll and the "FFVideoSource" to "LWLibavVideoSource", I ran some 2000 frame Trim tests. The results are great, no artifacts. So, as a workaround I created a new profile by adding these lines to an existing profile and renaming it accordingly. I still hope that Zathor is willing to return "LSMASHWorks" as a non-default option for VC-1 video :) .

Are you limiting ffms2 to a single thread (there's an option in MeGUI's settings)? In my experience it fixes a lot of ffms2 problems. ie
FFVideoSource("D:\video.mkv", threads=1)
and remove any fpsnum & fpsden stuff MeGUI is adding to the script for ffms2 if you haven't tried it already.

FFMS is limited to a single thread and I'll run a Trim test with the fpsnum and fpsden and threads additions removed. Thanks for the idea.

Update: I'll run some tests ASAP and post the results.

UpdateUpdate: I was finally able to run some tests. An FFMS/.ts combination resulted in much more (and worse) artifacts, with or without the fpsnum and fpsden and threads addition; an FFMS/.mkv combination resulted in the same artifacts (and frequency), with or without the fpsnum and fpsden and threads addition. Also, the results were the same regardless of indexing the source with video and audio or only video. Still, thanks for the thought :) . Ahhh, were you suggesting removing the "fpsnum" and "fpsden" additions but keeping the "threads" bit?

[Zetti]

MKVToolNix v13.0.0 is released.

[Morku]

MeGUI sometimes completly crash for me when I encode some audiofiles.
It does preparation fine, the encode is fine, even the final outputfile is complete and plays fine, but the finish step makes MeGUI crash. For some reason not always.
Currently I observe it for mp3 and ac3 output and 32-Bit and 64-Bit version of MeGUI.
The log is not that helpful, it ends at the encoding step:
--[Information] [25.06.2017 14:05:16] AviSynth script
--[Information] [25.06.2017 14:05:17] Command line used: -V0 - "{0}"
--[Information] [25.06.2017 14:05:17] AviSynth script environment opened
--[Information] [25.06.2017 14:05:17] Script loaded
--[Information] [25.06.2017 14:05:17] Output Decoder
---[Information] [25.06.2017 14:05:17] Channels: 2
---[Information] [25.06.2017 14:05:17] Bits per sample: 16
---[Information] [25.06.2017 14:05:17] Sample rate: 48000
--[Information] [25.06.2017 14:05:17] Job command line: D:\Sonstiges\Videotools\MeGUI\tools\lame\lame.exe -V0 - "G:\file.mp3"
--[Information] [25.06.2017 14:05:17] Process started
--[Information] [25.06.2017 14:05:17] Standard output stream
--[Information] [25.06.2017 14:05:17] Standard error stream
---[Information] [25.06.2017 14:05:34] LAME 3.99.5 64bits (http://lame.sf.net)
---[Information] [25.06.2017 14:05:34] CPU features: SSE (ASM used), SSE2 (ASM used)
---[Information] [25.06.2017 14:05:34] polyphase lowpass filter disabled
---[Information] [25.06.2017 14:05:34] Encoding <stdin> to G:\file.mp3
---[Information] [25.06.2017 14:05:34] Encoding as 48 kHz j-stereo MPEG-1 Layer III VBR(q=0)

So maybe the Crashdmp ist somehow more helpful. I uploaded here:
https://www.dropbox.com/s/nyseurmttn0pfc6/MeGUI.exe.13204.dmp?dl=1

The avs Script just looks like that:
avisource("utvideo.avi").Assumetff()
ConvertToYV12()

__film = last
__t0 = __film.trim(67380, 75020)
__t0

[Zathor]

MKVToolNix v13.0.0 is released.
Thanks, uploaded

MeGUI sometimes completly crash for me when I encode some audiofiles.
It does preparation fine, the encode is fine, even the final outputfile is complete and plays fine, but the finish step makes MeGUI crash. For some reason not always.
Currently I observe it for mp3 and ac3 output and 32-Bit and 64-Bit version of MeGUI.
Could you please upload also your full log or at least the versions block?

[Morku]

Sure. It's from a "well closed MeGUI", because logfiles when MeGUI crashs contains 'Preliminary log file only. During closing of MeGUI the well formed log file will be written.'
[Information] Log
-[Information] Versions
--[Information] MeGUI: 2755 x64
--[Information] System Information
---[Information] Operating System: Windows 10 Professional 1703 x64 (10.0.15063.413)
---[Information] .NET Framework: 4.0 (4.0.0.0)
---[Information] .NET Framework: 4.7 (4.7.02046)
--[Information] Component Information
---[Information] Haali Media Splitter: 1.13.138.14 (14-04-2013)
---[Information] Haali DSS2: not installed
---[Information] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
---[Information] MediaInfo: 0.7.96.0 (01-06-2017)
---[Information] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
---[Information] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
---[Information] 7z: 9.20 (18-11-2010)
--[Information] AviSynth Information
---[Information] AviSynth Wrapper
----[Information] Version: 1.0.2721.0
----[Information] Date: 29-04-2017
----[Information] Interface: 3
---[Information] AviSynth
----[Information] File Version: 0.1
----[Information] Date: 08-06-2017
----[Information] Name: AviSynth+ 0.1 (r2506, MT, x86_64)
----[Information] Version: AviSynth+ 0.1 (r2506, MT, x86_64)
----[Information] AviSynth+: true
----[Information] MT: true
----[Information] Status: active
---[Information] AviSynth portable
----[Information] File Version: 0.1
----[Information] Date: 08-06-2017
----[Information] Name: AviSynth+ 0.1 (r2506, MT, x86_64)
----[Information] Status: inactive

[Barough]

Official Opus-tools v0.1.10-9-gbd65450 (using libopus 1.2.1) windows binaries

Win64 build:
https://ci.appveyor.com/api/buildjobs/pd5jp1d0dv3ml1w7/artifacts/opus-tools.zip
Win32 build:
https://ci.appveyor.com/api/buildjobs/0532d1twvfk2gwqm/artifacts/opus-tools.zip

[olmicx]

Hello Zathor:
I wanting use Xvid 2009-05-30 (1.2.2+vaq) version. How can i use this version for Megui 2755?

[Barough]

Just exchange the xvid exe with the 1 u wanna use

Sent from my SM-G935F via Tapatalk

[olmicx]

Just exchange the xvid exe with the 1 u wanna use

Sent from my SM-G935F via Tapatalk

i changed xvid_encraw.exe (MeGUI-2755-32\tools\xvid_encraw).
But Megui Error:
xvid_encraw.exe has stopped working

Maybe there is different solution

[Barough]

Beats me then...... been ages since i encoded any xvid with megui or anything else for that matter.

Sent from my SM-G935F via Tapatalk

[hello_hello]

The Script Creator's Preview's frame count and duration calculations are off by a frame. The frame numbers and timings are correct, but the totals are a frame short.

http://preview.ibb.co/bS2Z05/preview.gif

I normally wouldn't have noticed or cared, but I've been encoding some BBC NTSC videos where I'd been de-interlacing the video sections and deblending the 25fps sections with SRestore and encoding as VFR. I was using MeGUI's preview to check the SRestore sections had much the same duration as if I'd simply de-interlaced, then adjusting the Trim lengths a little if need be. ie

Yadif(mode=1)
Trim(1,114).SRestore()
Would ideally have the same duration as:

Yadif(mode=1)
Trim(1,114).SelectEven()

For that example I think MeGUI's preview said the difference was 11ms while Avisynth says 19ms. Not much variation there I'll admit, but it can add up and I'd been so anal about it, only to put Info() at the end of a script and discover MeGUI had been fibbing.

[Zathor]

2760 [OneClick] cosmetics
2759 [OneClick] improved handling of audio tracks:
- FLAC encodings use the HD track instead of the core if possible. Feature request #610
- fixed demux of multiple audio tracks using the same input track (eac3to only)
- fixed handling of TrueHD+AC3 tracks if using an intermediate MKV file
2758 [Muxer] removed dtshd and dtsma file extension and added eac3 and thd+ac3 file extension where suitable
[MediaInfo] improved audio codec/type detection
2757 [L-SMASH Indexer] improved error handling
2756 [Chapter] added a workaround for MediaInfo sometimes not detecting all chapters in MPLS files (regression of 2753)

[olmicx]

Hello Zathor reply please.. really important
I wanting use Xvid 2009-05-30 (1.2.2+vaq) version. How can i use this version for Megui 2755?

[tebasuna51]

Hello Zathor reply please.. really important
I wanting use Xvid 2009-05-30 (1.2.2+vaq) version. How can i use this version for Megui 2755?

If is really important put the full log of your crash (to know OS, script and command line parameters) and a link to the Xvid version than want use (I don't found that old version).

[olmicx]

If is really important put the full log of your crash (to know OS, script and command line parameters) and a link to the Xvid version than want use (I don't found that old version).

There is error at HVS Masking: Lumi setting. I using Megui 2760.
I changed xvid_encraw folder with this link
http://megui.tmebi.de/test/xvid_encraw-2009-05-30.zip

[Error] Log
-[Information] Versions
--[Information] MeGUI: 2760 x86
--[Information] System Information
---[Information] Operating System: Windows Server 2012 R2 Standard x64 (6.3.0.9600)
---[Information] .NET Framework: 4.0 (4.0.0.0)
---[Information] .NET Framework: 4.6.x (4.6.01055)
--[Information] Component Information
---[Information] Haali Media Splitter: 1.13.138.14 (14-04-2013)
---[Information] Haali DSS2: (14-04-2013)
---[Information] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
---[Information] MediaInfo: 0.7.97.0 (29-06-2017)
---[Information] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
---[Information] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
---[Information] 7z: 9.20 (18-11-2010)
--[Information] AviSynth Information
---[Information] AviSynth Wrapper
----[Information] Version: 1.0.2721.0
----[Information] Date: 29-04-2017
----[Information] Interface: 3
---[Information] AviSynth
----[Information] File Version: 2.6.0.6
----[Information] Date: 31-03-2015
----[Information] Name: Avisynth 2.6
----[Information] Version: AviSynth 2.60, build:Mar 31 2015 [16:38:54]
----[Information] AviSynth+: false
----[Information] MT: false
----[Information] Status: active
---[Information] AviSynth portable
----[Information] File Version: 2.6.0.6
----[Information] Date: 21-09-2015
----[Information] Name: Avisynth 2.6
----[Information] Status: inactive
-[Information] Update detection
--[Information] [2.7.2017 02:10:50] Automatic update is disabled
--[Information] [2.7.2017 02:10:50] Using cached update config and server: http://megui.org/auto/
--[Information] [2.7.2017 02:10:50] There are 3 packages which can be updated: AviSynth plugins, AviSynth portable, Xvid
-[Information] Log for job4 (video, VTS_01_1.avs -> )
--[Information] [2.7.2017 02:11:56] Started handling job
--[Information] [2.7.2017 02:11:56] Preprocessing
--[Information] [2.7.2017 02:11:56] AviSynth input script
---[NoImage] LoadPlugin("C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\dgindex\DGDecode.dll")
---[NoImage] DGDecode_mpeg2source("C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.d2v", info=3)
---[NoImage] LoadPlugin("C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\avisynth_plugin\ColorMatrix.dll")
---[NoImage] ColorMatrix(hints=true, threads=0)
---[NoImage] #deinterlace
---[NoImage] #crop
---[NoImage] Spline36Resize(720,400) # Spline36 (Neutral)
---[NoImage] #denoise
--[Information] [2.7.2017 02:11:57] resolution: 720x400
--[Information] [2.7.2017 02:11:57] frame rate: 25/1
--[Information] [2.7.2017 02:11:57] frames: 152843
--[Information] [2.7.2017 02:11:57] aspect ratio: 9:5 (1.800)
--[Information] [2.7.2017 02:11:57] Job command line: "C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\xvid_encraw\xvid_encraw.exe" -i "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.avs" -pass1 "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.stats" -bitrate 1593 -max_key_interval 250 -chigh 30 -clow 15 -max_bframes 1 -bquant_ratio 162 -bquant_offset 0 -vhqmode 4 -bvhq -qmatrix "C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\matrices\eqm_v3lr.xcm" -nopacked -imin 1 -bmin 1 -pmin 1 -threads 2 -par 1
--[Information] [2.7.2017 02:11:57] Process started
--[Information] [2.7.2017 02:11:57] Standard output stream
---[Information] [2.7.2017 02:11:57] xvid_encraw - raw mpeg4 bitstream encoder written by Christoph Lampert 2002-2003
--[Information] [2.7.2017 02:11:57] Standard error stream
--[Information] [2.7.2017 02:12:02] Process exits with error: 0xFFFFFFFF (-1)
--[Information] Deleting aborted output
---[Information] [2.7.2017 02:12:03] Delete aborted output set: True
--[Information] [2.7.2017 02:12:03] Job completed
--[Information] [2.7.2017 02:12:03] Current job was aborted
-[Information] Log for job2 (video, VTS_01_1.avs -> VTS_01_1.m4v)
--[Information] [2.7.2017 02:12:07] Deleting intermediate files
---[Information] [2.7.2017 02:12:08] Successfully deleted C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.stats
-[Error] Log for job1 (video, VTS_01_1.avs -> )
--[Information] [2.7.2017 02:12:17] Started handling job
--[Information] [2.7.2017 02:12:17] Preprocessing
--[Information] [2.7.2017 02:12:17] AviSynth input script
---[NoImage] LoadPlugin("C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\dgindex\DGDecode.dll")
---[NoImage] DGDecode_mpeg2source("C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.d2v", info=3)
---[NoImage] LoadPlugin("C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\avisynth_plugin\ColorMatrix.dll")
---[NoImage] ColorMatrix(hints=true, threads=0)
---[NoImage] #deinterlace
---[NoImage] #crop
---[NoImage] Spline36Resize(720,400) # Spline36 (Neutral)
---[NoImage] #denoise
--[Information] [2.7.2017 02:12:17] resolution: 720x400
--[Information] [2.7.2017 02:12:17] frame rate: 25/1
--[Information] [2.7.2017 02:12:17] frames: 152843
--[Information] [2.7.2017 02:12:17] aspect ratio: 9:5 (1.800)
--[Information] [2.7.2017 02:12:17] Job command line: "C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\xvid_encraw\xvid_encraw.exe" -i "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.avs" -pass1 "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.stats" -bitrate 1593 -max_key_interval 250 -chigh 30 -clow 15 -max_bframes 1 -bquant_ratio 162 -bquant_offset 0 -vhqmode 4 -bvhq -qmatrix "C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\matrices\eqm_v3lr.xcm" -nopacked -masking 1 -imin 1 -bmin 1 -pmin 1 -threads 2 -par 1
--[Information] [2.7.2017 02:12:17] Process started
--[Information] [2.7.2017 02:12:17] Standard output stream
---[Information] [2.7.2017 02:12:17] xvid_encraw - raw mpeg4 bitstream encoder written by Christoph Lampert 2002-2003
--[Error] [2.7.2017 02:12:17] Standard error stream
---[Information] [2.7.2017 02:12:17] xvid_encraw built at 10:22:53 on Aug 31 2007
---[Error] [2.7.2017 02:12:17] Usage : xvid_encraw [OPTIONS]
---[Information] [2.7.2017 02:12:17] Input options:
---[Information] [2.7.2017 02:12:17] -i string : input filename (stdin)
---[Information] [2.7.2017 02:12:17] -type integer : input data type (yuv=0, pgm=1, avi/avs=2)
---[Information] [2.7.2017 02:12:17] -w integer : frame width ([1.2048])
---[Information] [2.7.2017 02:12:17] -h integer : frame height ([1.2048])
---[Information] [2.7.2017 02:12:17] -frames integer : number of frames to encode
---[Information] [2.7.2017 02:12:17] Output options:
---[Information] [2.7.2017 02:12:17] -dump : save decoder output
---[Information] [2.7.2017 02:12:17] -save : save an Elementary Stream file per frame
---[Information] [2.7.2017 02:12:17] -o string : save an Elementary Stream,
---[Information] [2.7.2017 02:12:17] or AVI file,
---[Information] [2.7.2017 02:12:17] or MKV file,
---[Information] [2.7.2017 02:12:17] based on filename extension
---[Information] [2.7.2017 02:12:17] -avi string : save an AVI file for the complete sequence
---[Information] [2.7.2017 02:12:17] -mkv string : save a MKV file for the complete sequence
---[Information] [2.7.2017 02:12:17] BFrames options:
---[Information] [2.7.2017 02:12:17] -max_bframes integer : max bframes (2)
---[Information] [2.7.2017 02:12:17] -bquant_ratio integer : bframe quantizer ratio (150)
---[Information] [2.7.2017 02:12:17] -bquant_offset integer : bframe quantizer offset (100)
---[Information] [2.7.2017 02:12:17] Rate control options:
---[Information] [2.7.2017 02:12:17] -framerate float : target framerate (25.0)
---[Information] [2.7.2017 02:12:17] -bitrate [integer] : target bitrate (700)
---[Information] [2.7.2017 02:12:17] values <= 10000 are treated as kbit/s
---[Information] [2.7.2017 02:12:17] values > 10000 are treated as bit/s
---[Information] [2.7.2017 02:12:17] -size integer : target size in kilobytes
---[Information] [2.7.2017 02:12:17] -single : single pass mode (default)
---[Information] [2.7.2017 02:12:17] -cq float : single pass constant quantizer
---[Information] [2.7.2017 02:12:17] -pass1 [filename] : twopass mode (first pass)
---[Information] [2.7.2017 02:12:17] -full1pass : perform full first pass
---[Information] [2.7.2017 02:12:17] -pass2 [filename] : twopass mode (2nd pass)
---[Information] [2.7.2017 02:12:17] -altpass2 [filename] : twopass mode (2nd pass alt)
---[Information] [2.7.2017 02:12:17] -zq starting_frame float : bitrate zone; quant
---[Information] [2.7.2017 02:12:17] -zw starting_frame float : bitrate zone; weight
---[Information] [2.7.2017 02:12:17] -zones : see xvid_encraw -help zones
---[Information] [2.7.2017 02:12:17] -max_key_interval integer : maximum keyframe interval (300)
---[Information] [2.7.2017 02:12:17] Single Pass options:
---[Information] [2.7.2017 02:12:17] -reaction integer : reaction delay factor (16)
---[Information] [2.7.2017 02:12:17] -averaging integer : averaging period (100)
---[Information] [2.7.2017 02:12:17] -smoother integer : smoothing buffer (100)
---[Information] [2.7.2017 02:12:17] Second Pass options:
---[Information] [2.7.2017 02:12:17] -kboost integer : I frame boost (10)
---[Information] [2.7.2017 02:12:17] -kthresh integer : I frame reduction threshold (1)
---[Information] [2.7.2017 02:12:17] -kreduction integer : I frame reduction amount (20)
---[Information] [2.7.2017 02:12:17] -ostrength integer : overflow control strength (5)
---[Information] [2.7.2017 02:12:17] -oimprove integer : max overflow improvement (5)
---[Information] [2.7.2017 02:12:17] -odegrade integer : max overflow degradation (5)
---[Information] [2.7.2017 02:12:17] -chigh integer : high bitrate scenes degradation (0)
---[Information] [2.7.2017 02:12:17] -clow integer : low bitrate scenes improvement (0)
---[Information] [2.7.2017 02:12:17] -overhead integer : container frame overhead (24)
---[Information] [2.7.2017 02:12:17] -vbvsize integer : use vbv buffer size
---[Information] [2.7.2017 02:12:17] -vbvmax integer : vbv max bitrate
---[Information] [2.7.2017 02:12:17] -vbvpeak integer : vbv peak bitrate over 1 second
---[Information] [2.7.2017 02:12:17] Other options
---[Information] [2.7.2017 02:12:17] -noasm : do not use assembly optmized code
---[Information] [2.7.2017 02:12:17] -turbo : use turbo presets for higher encoding speed
---[Information] [2.7.2017 02:12:17] -quality integer : quality ([0..6]) (6)
---[Information] [2.7.2017 02:12:17] -vhqmode integer : level of R-D optimizations ([0..4]) (1)
---[Information] [2.7.2017 02:12:17] -bvhq : use R-D optimizations for B-frames
---[Information] [2.7.2017 02:12:17] -qpel : use quarter pixel ME
---[Information] [2.7.2017 02:12:17] -gmc : use global motion compensation
---[Information] [2.7.2017 02:12:17] -qtype integer : quantization type (H263:0, MPEG4:1) (0)
---[Information] [2.7.2017 02:12:17] -qmatrix filename : use custom MPEG4 quantization matrix
---[Information] [2.7.2017 02:12:17] -interlaced [integer] : interlaced encoding (BFF:1, TFF:2) (1)
---[Information] [2.7.2017 02:12:17] -nopacked : Disable packed mode
---[Information] [2.7.2017 02:12:17] -noclosed_gop : Disable closed GOP mode
---[Information] [2.7.2017 02:12:17] -lumimasking : use lumimasking algorithm
---[Information] [2.7.2017 02:12:17] -hvs_aq string : use custom adaptive quantisation equation
---[Information] [2.7.2017 02:12:17] -hvs_lmb string : use custom lambda equation
---[Information] [2.7.2017 02:12:17] -stats : print stats about encoded frames
---[Information] [2.7.2017 02:12:17] -ssim [integer] : prints ssim for each frame ([0..4]) (2)
---[Information] [2.7.2017 02:12:17] -ssim_file filename : outputs the ssim stats into a file
---[Information] [2.7.2017 02:12:17] -debug : activates xvidcore internal debugging output
---[Information] [2.7.2017 02:12:17] -vop_debug : print some info directly into encoded frames
---[Information] [2.7.2017 02:12:17] -nochromame : Disable chroma motion estimation
---[Information] [2.7.2017 02:12:17] -notrellis : Disable trellis quantization
---[Information] [2.7.2017 02:12:17] -imin integer : Minimum I Quantizer (1..31) (2)
---[Information] [2.7.2017 02:12:17] -imax integer : Maximum I quantizer (1..31) (31)
---[Information] [2.7.2017 02:12:17] -bmin integer : Minimum B Quantizer (1..31) (2)
---[Information] [2.7.2017 02:12:17] -bmax integer : Maximum B quantizer (1..31) (31)
---[Information] [2.7.2017 02:12:17] -pmin integer : Minimum P Quantizer (1..31) (2)
---[Information] [2.7.2017 02:12:17] -pmax integer : Maximum P quantizer (1..31) (31)
---[Information] [2.7.2017 02:12:17] -drop integer : Frame Drop Ratio (0..100) (0)
---[Information] [2.7.2017 02:12:17] -start integer : Starting frame number
---[Information] [2.7.2017 02:12:17] -threads integer : Number of threads
---[Information] [2.7.2017 02:12:17] -nothreadedinput : Disable threaded input reading
---[Information] [2.7.2017 02:12:17] -progress [integer] : Show progress updates every n frames (10)
---[Information] [2.7.2017 02:12:17] -par integer[:integer] : Set Pixel Aspect Ratio.
---[Information] [2.7.2017 02:12:17] 1 = 1:1
---[Information] [2.7.2017 02:12:17] 2 = 12:11 (4:3 PAL)
---[Information] [2.7.2017 02:12:17] 3 = 10:11 (4:3 NTSC)
---[Information] [2.7.2017 02:12:17] 4 = 16:11 (16:9 PAL)
---[Information] [2.7.2017 02:12:17] 5 = 40:33 (16:9 NTSC)
---[Information] [2.7.2017 02:12:17] other = custom (width:height)
---[Information] [2.7.2017 02:12:17] -help : prints this help message
---[Information] [2.7.2017 02:12:17] -help zones : prints zones help message
---[Information] [2.7.2017 02:12:17] NB: You can define 64 zones repeating the -z[qw] option as needed.
--[Error] [2.7.2017 02:12:17] Process exits with error: 0xFFFFFFFF (-1)
--[Information] [2.7.2017 02:12:17] Job completed

[Zathor]

It may help to change the masking settings. If not:
The last version with support for that ancient xvid version was MeGUI 2546. Either use xvid 1.3.x with the recent MeGUI or xvid 1.2.x with MeGUI 2546 (or older).

Btw why do you want to use such an old version?

[Morku]

Anything new about my crashing MeGUI at the step "[job1] Finalizing encoder" for audiofiles?
Preliminary log file only. During closing of MeGUI the well formed log file will be written.

-[Information] Versions
--[Information] MeGUI: 2760 x86
-[Information] Operating System: Windows 10 Professional 1703 x64 (10.0.15063.447)
-[Information] .NET Framework: 4.0 (4.0.0.0)
-[Information] .NET Framework: 4.7 (4.7.02046)
--[Information] System Information
-[Information] Update detection
--[Information] [02.07.2017 11:33:31] Automatic update is disabled
-[Information] Haali Media Splitter: 1.13.138.14 (14-04-2013)
-[Information] Haali DSS2: not installed
-[Information] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
-[Information] MediaInfo: 0.7.97.0 (29-06-2017)
--[Information] [02.07.2017 11:33:31] Using cached update config and server: http://megui.org/auto/
-[Information] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
-[Information] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
-[Information] 7z: 9.20 (18-11-2010)
--[Information] Component Information
-[Information] Version: 1.0.2721.0
-[Information] Date: 29-04-2017
-[Information] Interface: 3
-[Information] AviSynth Wrapper
-[Information] File Version: 0.1
-[Information] Date: 29-06-2017
-[Information] Name: AviSynth+ 0.1 (r2508, MT, i386)
--[Information] [02.07.2017 11:33:31] No package requires an update
-[Information] Version: AviSynth+ 0.1 (r2508, MT, i386)
-[Information] AviSynth+: true
-[Information] MT: true
-[Information] Status: active
-[Information] AviSynth
-[Information] File Version: 0.1
-[Information] Date: 29-06-2017
-[Information] Name: AviSynth+ 0.1 (r2508, MT, i386)
-[Information] Status: inactive
-[Information] AviSynth portable
--[Information] AviSynth Information
-[Information] Log for job1 (audio, 2.avs -> 2.mp3)
--[Information] [02.07.2017 11:33:50] Started handling job
--[Information] [02.07.2017 11:33:52] Preprocessing
--[Information] [02.07.2017 11:33:52] MediaInfo
---[Information] [02.07.2017 11:33:52] File: G:\2.avs
---[Information] AVS input file detected. Getting media information from AviSynth.
-[Information] Format: AVS
-[Information] FormatString: AviSynth Script
-[Information] FileSize: 306
-[Information] PlayTime: 00:13:20.0400000
---[Information] General
-[Information] ID: 0
-[Information] StreamOrder:
-[Information] Width: 704
-[Information] Height: 576
-[Information] FrameCount: 40002
-[Information] FrameRate: 50
-[Information] FrameRateOriginal:
-[Information] FrameRateMode:
-[Information] ScanType: Progressive
-[Information] Codec: AVS Video
-[Information] CodecString: AVS
-[Information] Bits Depth:
-[Information] Format: AVS
-[Information] AspectRatio: 4:3
-[Information] AspectRatioString:
-[Information] Delay: 0
-[Information] Title:
-[Information] Language:
-[Information] LanguageString:
-[Information] Default:
-[Information] DefaultString:
-[Information] Forced:
-[Information] ForcedString:
---[Information] Video
-[Information] ID: 0
-[Information] StreamOrder:
-[Information] Format: AVS
-[Information] FormatProfile:
-[Information] FormatSettingsSBR:
-[Information] FormatSettingsPS:
-[Information] Muxing Mode:
-[Information] SamplingRate: 48000
-[Information] SamplingRateString: 48000
-[Information] Channels: 2
-[Information] ChannelsString: 2 channels
-[Information] ChannelPositionsString2:
-[Information] BitRateMode: CBR
-[Information] Delay: 0
-[Information] Title:
-[Information] Language:
-[Information] LanguageString:
-[Information] Default:
-[Information] DefaultString:
-[Information] Forced:
-[Information] ForcedString:
-[Information] [02.07.2017 11:33:53] The language information is not available for this track. The default MeGUI language has been selected.
---[Information] Audio
--[Information] [02.07.2017 11:33:53] ignoring downmix as there is only 2 channel(s)
-[NoImage] Import("G:\2.avs")
-[NoImage] # detected channels: 2
-[NoImage] # detected channel positions:
-[NoImage] ConvertAudioToFloat(last)
-[NoImage] SSRC(48000)
-[NoImage] Normalize()
-[NoImage] 32==Audiobits(last)?ConvertAudioTo16bit(last):last
-[NoImage] return last
-[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> stereo + LFE
-[NoImage] function c6_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] lf = GetChannel(a, 4)
-[NoImage] sl = GetChannel(a, 5)
-[NoImage] sr = GetChannel(a, 6)
-[NoImage] fl_sl = MixAudio(fl, sl, 0.2929, 0.2929)
-[NoImage] fr_sr = MixAudio(fr, sr, 0.2929, 0.2929)
-[NoImage] fc_lf = MixAudio(fc, lf, 0.2071, 0.2071)
-[NoImage] l = MixAudio(fl_sl, fc_lf, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_sr, fc_lf, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,SL,SR or L,R,LFE,SL,SR-> Stereo
-[NoImage] function c5_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] fl_sl = MixAudio(fl, sl, 0.3694, 0.3694)
-[NoImage] fr_sr = MixAudio(fr, sr, 0.3694, 0.3694)
-[NoImage] l = MixAudio(fl_sl, fc, 1.0, 0.2612)
-[NoImage] r = MixAudio(fr_sr, fc, 1.0, 0.2612)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,LFE,S -> Stereo
-[NoImage] function c52_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] lf = GetChannel(a, 4)
-[NoImage] bc = GetChannel(a, 5)
-[NoImage] fl_bc = MixAudio(fl, bc, 0.3205, 0.2265)
-[NoImage] fr_bc = MixAudio(fr, bc, 0.3205, 0.2265)
-[NoImage] fc_lf = MixAudio(fc, lf, 0.2265, 0.2265)
-[NoImage] l = MixAudio(fl_bc, fc_lf, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_bc, fc_lf, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels Quadro L,R,SL,SR -> Stereo
-[NoImage] function c4_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 3)
-[NoImage] sr = GetChannel(a, 4)
-[NoImage] l = MixAudio(fl, sl, 0.5, 0.5)
-[NoImage] r = MixAudio(fr, sr, 0.5, 0.5)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels L,R,C,LFE or L,R,S,LFE or L,R,C,S -> Stereo
-[NoImage] function c42_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] lf = GetChannel(a, 4)
-[NoImage] fc_lf = MixAudio(fc, lf, 0.2929, 0.2929)
-[NoImage] l = MixAudio(fl, fc_lf, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, fc_lf, 0.4142, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 3 Channels L,R,C or L,R,S or L,R,LFE -> Stereo
-[NoImage] function c3_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] l = MixAudio(fl, fc, 0.5858, 0.4142)
-[NoImage] r = MixAudio(fr, fc, 0.5858, 0.4142)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> Dolby ProLogic
-[NoImage] function c6_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 5)
-[NoImage] sr = GetChannel(a, 6)
-[NoImage] bc = MixAudio(sl, sr, 0.2265, 0.2265)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3205, 0.2265)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3205, 0.2265)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,SL,SR -> Dolby ProLogic
-[NoImage] function c5_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] bc = MixAudio(sl, sr, 0.2265, 0.2265)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3205, 0.2265)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3205, 0.2265)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,LFE,SL,SR -> Dolby ProLogic
-[NoImage] function c52_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] bc = MixAudio(sl, sr, 0.2929, 0.2929)
-[NoImage] l = MixAudio(fl, bc, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, bc, 0.4142, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,LFE,S -> Dolby ProLogic
-[NoImage] function c53_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] bc = GetChannel(a, 5)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.4142, 0.2929)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.4142, 0.2929)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 0.2929)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -0.2929)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels Quadro L,R,SL,SR -> Dolby ProLogic
-[NoImage] function c4_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 3)
-[NoImage] sr = GetChannel(a, 4)
-[NoImage] bc = MixAudio(sl, sr, 0.2929, 0.2929)
-[NoImage] l = MixAudio(fl, bc, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, bc, 0.4142, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels L,R,LFE,S -> Dolby ProLogic
-[NoImage] function c42_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] bc = GetChannel(a, 4)
-[NoImage] l = MixAudio(fl, bc, 0.5858, 0.4142)
-[NoImage] r = MixAudio(fr, bc, 0.5858, -0.4142)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels L,R,C,S -> Dolby ProLogic
-[NoImage] function c43_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] bc = GetChannel(a, 4)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.4142, 0.2929)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.4142, 0.2929)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 0.2929)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -0.2929)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 3 Channels L,R,S -> Dolby ProLogic
-[NoImage] function c3_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] bc = GetChannel(a, 3)
-[NoImage] l = MixAudio(fl, bc, 0.5858, 0.4142)
-[NoImage] r = MixAudio(fr, bc, 0.5858, -0.4142)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> Dolby ProLogic II
-[NoImage] function c6_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 5)
-[NoImage] sr = GetChannel(a, 6)
-[NoImage] ssl = MixAudio(sl, sr, 0.2818, 0.1627)
-[NoImage] ssr = MixAudio(sl, sr, -0.1627, -0.2818)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3254, 0.2301)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3254, 0.2301)
-[NoImage] l = MixAudio(fl_fc, ssl, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, ssr, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,SL,SR -> Dolby ProLogic II
-[NoImage] function c5_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] ssl = MixAudio(sl, sr, 0.2818, 0.1627)
-[NoImage] ssr = MixAudio(sl, sr, -0.1627, -0.2818)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3254, 0.2301)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3254, 0.2301)
-[NoImage] l = MixAudio(fl_fc, ssl, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, ssr, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,LFE,SL,SR -> Dolby ProLogic II
-[NoImage] function c52_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] ssl = MixAudio(sl, sr, 0.3714, 0.2144)
-[NoImage] ssr = MixAudio(sl, sr, -0.2144, -0.3714)
-[NoImage] l = MixAudio(fl, ssl, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, ssr, 0.4142, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels Quadro L,R,SL,SR -> Dolby ProLogic II
-[NoImage] function c4_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 3)
-[NoImage] sr = GetChannel(a, 4)
-[NoImage] ssl = MixAudio(sl, sr, 0.3714, 0.2144)
-[NoImage] ssr = MixAudio(sl, sr, -0.2144, -0.3714)
-[NoImage] l = MixAudio(fl, ssl, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, ssr, 0.4142, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
--[Information] [02.07.2017 11:33:53] AviSynth script
--[Information] [02.07.2017 11:33:54] Command line used: -V0 - "{0}"
--[Information] [02.07.2017 11:33:54] AviSynth script environment opened
--[Information] [02.07.2017 11:33:54] Script loaded
--[Information] [02.07.2017 11:33:54] Output Decoder
---[Information] [02.07.2017 11:33:54] Channels: 2
---[Information] [02.07.2017 11:33:54] Bits per sample: 16
---[Information] [02.07.2017 11:33:54] Sample rate: 48000
--[Information] [02.07.2017 11:33:54] Job command line: D:\Sonstiges\Videotools\MeGUI x86\tools\lame\lame.exe -V0 - "G:\2.mp3"
--[Information] [02.07.2017 11:33:54] Process started
--[Information] [02.07.2017 11:33:54] Standard output stream
--[Information] [02.07.2017 11:33:54] Standard error stream
---[Information] [02.07.2017 11:34:05] LAME 3.99.5 64bits (http://lame.sf.net)
---[Information] [02.07.2017 11:34:05] CPU features: SSE (ASM used), SSE2 (ASM used)
---[Information] [02.07.2017 11:34:05] polyphase lowpass filter disabled
---[Information] [02.07.2017 11:34:05] Encoding <stdin> to G:\2.mp3
---[Information] [02.07.2017 11:34:05] Encoding as 48 kHz j-stereo MPEG-1 Layer III VBR(q=0)


Crashdump of MeGUI 32-Bit: https://www.dropbox.com/s/9p0ydkx4w2gqcxy/MeGUI.exe.10376.dmp?dl=1

example script I used:
global MeGUI_darx = 4
global MeGUI_dary = 3

AVISource("1.avi", audio=true).AssumeFPS(25,1).Assumetff()

ConverttoYV12()

__film = last
__t0 = __film.trim(75033, 95033)
__t0

QTGMC(Denoiser="dfttest", Preset="Slow", EdiMode="NNEDI3", EdiThreads=8, Sharpness=1.0) #Preset="Slower" "Ultra Fast"


Or it's my PC? :confused:

[Zathor]

Sorry, I cannot help much with that as AviSource + DirectShowSource may lead to unpredicted behaviour. Test it again with a simple script - e.g. lsmash with the extracted audio track and report back.

[tebasuna51]

There is error at HVS Masking: Lumi setting. I using Megui 2760.
I changed xvid_encraw folder with this link
http://megui.tmebi.de/test/xvid_encraw-2009-05-30.zip
The HVS Masking error is related to Job 1, see later.

The error in Job 4:
-[Information] Log for job4 (video, VTS_01_1.avs -> )
...
"C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\xvid_encraw\xvid_encraw.exe" -i "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.avs" -pass1 "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.stats" -bitrate 1593 -max_key_interval 250 -chigh 30 -clow 15 -max_bframes 1 -bquant_ratio 162 -bquant_offset 0 -vhqmode 4 -bvhq -qmatrix "C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\matrices\eqm_v3lr.xcm" -nopacked -imin 1 -bmin 1 -pmin 1 -threads 2 -par 1
...
--[Information] [2.7.2017 02:12:02] Process exits with error: 0xFFFFFFFF (-1)

I can't reproduce the error in my system (W 7, last Avs+, your xvid_encraw) and this .bat encode:

xvid_encraw -i "test.avs" -pass1 "test.stats" -bitrate 1593 -max_key_interval 250 -chigh 30 -clow 15 -max_bframes 1 -bquant_ratio 162 -bquant_offset 0 -vhqmode 4 -bvhq -qmatrix "eqm_v3ulr_rev3.xcm" -nopacked -imin 1 -bmin 1 -pmin 1 -threads 2 -par 1
pause

I used "eqm_v3ulr_rev3.xcm" from https://forum.doom9.org/showthread.php?p=551562#post551562 because I don't have any ...megui\matrices folder and don't found eqm_v3lr.xcm

Do you have MeGUI-2760-32 X121UOF\matrices\eqm_v3lr.xcm?

Try to make a .bat file with:

"C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\xvid_encraw\xvid_encraw.exe" -i "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.avs" -pass1 "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.stats" -bitrate 1593 -max_key_interval 250 -chigh 30 -clow 15 -max_bframes 1 -bquant_ratio 162 -bquant_offset 0 -vhqmode 4 -bvhq -qmatrix "C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\matrices\eqm_v3lr.xcm" -nopacked -imin 1 -bmin 1 -pmin 1 -threads 2 -par 1
pause

And run it. If also crash is not a MeGUI problem.

-[Error] Log for job1 (video, VTS_01_1.avs -> )
...
"C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\tools\xvid_encraw\xvid_encraw.exe" -i "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.avs" -pass1 "C:\Users\Administrator\Desktop\NYZGL\VIDEO_TS\VTS_01_1.stats" -bitrate 1593 -max_key_interval 250 -chigh 30 -clow 15 -max_bframes 1 -bquant_ratio 162 -bquant_offset 0 -vhqmode 4 -bvhq -qmatrix "C:\Users\Administrator\Desktop\MeGUI-2760-32 X121UOF\matrices\eqm_v3lr.xcm" -nopacked -masking 1 -imin 1 -bmin 1 -pmin 1 -threads 2 -par 1

---[Error] [2.7.2017 02:12:17] Usage : xvid_encraw [OPTIONS]

This job crash showing xvid_encraw HELP because the -masking parameter is not supported by this old xvid_encraw, yes with the MeGUI default:

-masking [integer] : HVS masking mode (None:0, Lumi:1, Variance:2) (0)

[tebasuna51]

Anything new about my crashing MeGUI at the step "[job1] Finalizing encoder" for audiofiles?

Try this script:
AVISource("1.avi", audio=true).AssumeFPS(25,1)
trim(75033, 95033)
KillVideo()
SSRC(48000)
Normalize()

[Morku]

Try this script:
AVISource("1.avi", audio=true).AssumeFPS(25,1)
trim(75033, 95033)
KillVideo()
SSRC(48000)
Normalize()

Gives error: Error parsing avs file
Input audio sample format to SSRC must be float. line 4

Without "SSRC(48000)", finalizing step makes MeGUI crash, too.

Next try, adding "ConvertAudioToFloat()"
AVISource("1.avi", audio=true).AssumeFPS(25,1)
trim(75033, 95033)
KillVideo()
ConvertAudioToFloat()
SSRC(48000)
Normalize()

MeGUI crash already by trying to open the avs file.

I also tried changing 'Prefered Decoder' from LWLibavAudioSource to NicAudio and DirectShow, but it still crash at finalizing.
There I found a little cosmetic bug. Changing to FFAudioSource, DirectShowSource and BassAudio and close MeGUI normally, the Prefered Decoder keeps saved. Changing to NicAudio, MeGUI changes Prefered Decoder to LWLibavAudioSource after restart MeGUI (currently testing with 32-Bit version).

Soooooo last try. I extracted wav with VirtualDub, put wav into Audio Input, Queue, Start, Encoding, Finalizing and crash...
Preliminary log file only. During closing of MeGUI the well formed log file will be written.

-[Information] Versions
--[Information] MeGUI: 2760 x86
-[Information] Operating System: Windows 10 Professional 1703 x64 (10.0.15063.447)
-[Information] .NET Framework: 4.0 (4.0.0.0)
-[Information] .NET Framework: 4.7 (4.7.02046)
--[Information] System Information
-[Information] Update detection
--[Information] [02.07.2017 15:27:37] Automatic update is disabled
-[Information] Haali Media Splitter: 1.13.138.14 (14-04-2013)
-[Information] Haali DSS2: not installed
-[Information] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
-[Information] MediaInfo: 0.7.97.0 (29-06-2017)
--[Information] [02.07.2017 15:27:37] Using cached update config and server: http://megui.tmebi.de/test/
-[Information] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
-[Information] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
-[Information] 7z: 9.20 (18-11-2010)
--[Information] Component Information
-[Information] Version: 1.0.2721.0
-[Information] Date: 29-04-2017
-[Information] Interface: 3
-[Information] AviSynth Wrapper
-[Information] File Version: 0.1
-[Information] Date: 29-06-2017
-[Information] Name: AviSynth+ 0.1 (r2508, MT, i386)
--[Information] [02.07.2017 15:27:37] No package requires an update
-[Information] Version: AviSynth+ 0.1 (r2508, MT, i386)
-[Information] AviSynth+: true
-[Information] MT: true
-[Information] Status: active
-[Information] AviSynth
-[Information] File Version: 0.1
-[Information] Date: 29-06-2017
-[Information] Name: AviSynth+ 0.1 (r2508, MT, i386)
-[Information] Status: inactive
-[Information] AviSynth portable
--[Information] AviSynth Information
-[Information] Log for job1 (audio, 2.wav -> 2.mp3)
--[Information] [02.07.2017 15:27:48] Started handling job
--[Information] [02.07.2017 15:27:48] Preprocessing
--[Information] [02.07.2017 15:27:48] MediaInfo
---[Information] [02.07.2017 15:27:48] File: G:\2.wav
-[Information] Format: Wave
-[Information] FormatString: Wave
-[Information] FileSize: 153607784
-[Information] PlayTime: 00:13:20.040
---[Information] General
-[Information] ID:
-[Information] StreamOrder:
-[Information] Format: PCM
-[Information] FormatProfile:
-[Information] FormatSettingsSBR:
-[Information] FormatSettingsPS:
-[Information] Muxing Mode:
-[Information] SamplingRate: 48000
-[Information] SamplingRateString: 48.0 kHz
-[Information] Channels: 2
-[Information] ChannelsString: 2 channels
-[Information] ChannelPositionsString2:
-[Information] BitRateMode: CBR
-[Information] Delay:
-[Information] Title:
-[Information] Language:
-[Information] LanguageString:
-[Information] Default:
-[Information] DefaultString:
-[Information] Forced:
-[Information] ForcedString:
-[Information] [02.07.2017 15:27:48] The language information is not available for this track. The default MeGUI language has been selected.
---[Information] Audio
--[Information] [02.07.2017 15:27:51] Trying to open the file with LWLibavAudioSource()
--[Information] [02.07.2017 15:27:53] Successfully opened the file with LWLibavAudioSource()
--[Information] [02.07.2017 15:27:55] ignoring downmix as there is only 2 channel(s)
-[NoImage] LoadPlugin("D:\Sonstiges\Videotools\MeGUI x86\tools\lsmash\LSMASHSource.dll")
-[NoImage] LSMASHAudioSource("G:\2.wav")
-[NoImage] # detected channels: 2
-[NoImage] # detected channel positions:
-[NoImage] ConvertAudioToFloat(last)
-[NoImage] SSRC(48000)
-[NoImage] Normalize()
-[NoImage] 32==Audiobits(last)?ConvertAudioTo16bit(last):last
-[NoImage] return last
-[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> stereo + LFE
-[NoImage] function c6_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] lf = GetChannel(a, 4)
-[NoImage] sl = GetChannel(a, 5)
-[NoImage] sr = GetChannel(a, 6)
-[NoImage] fl_sl = MixAudio(fl, sl, 0.2929, 0.2929)
-[NoImage] fr_sr = MixAudio(fr, sr, 0.2929, 0.2929)
-[NoImage] fc_lf = MixAudio(fc, lf, 0.2071, 0.2071)
-[NoImage] l = MixAudio(fl_sl, fc_lf, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_sr, fc_lf, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,SL,SR or L,R,LFE,SL,SR-> Stereo
-[NoImage] function c5_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] fl_sl = MixAudio(fl, sl, 0.3694, 0.3694)
-[NoImage] fr_sr = MixAudio(fr, sr, 0.3694, 0.3694)
-[NoImage] l = MixAudio(fl_sl, fc, 1.0, 0.2612)
-[NoImage] r = MixAudio(fr_sr, fc, 1.0, 0.2612)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,LFE,S -> Stereo
-[NoImage] function c52_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] lf = GetChannel(a, 4)
-[NoImage] bc = GetChannel(a, 5)
-[NoImage] fl_bc = MixAudio(fl, bc, 0.3205, 0.2265)
-[NoImage] fr_bc = MixAudio(fr, bc, 0.3205, 0.2265)
-[NoImage] fc_lf = MixAudio(fc, lf, 0.2265, 0.2265)
-[NoImage] l = MixAudio(fl_bc, fc_lf, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_bc, fc_lf, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels Quadro L,R,SL,SR -> Stereo
-[NoImage] function c4_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 3)
-[NoImage] sr = GetChannel(a, 4)
-[NoImage] l = MixAudio(fl, sl, 0.5, 0.5)
-[NoImage] r = MixAudio(fr, sr, 0.5, 0.5)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels L,R,C,LFE or L,R,S,LFE or L,R,C,S -> Stereo
-[NoImage] function c42_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] lf = GetChannel(a, 4)
-[NoImage] fc_lf = MixAudio(fc, lf, 0.2929, 0.2929)
-[NoImage] l = MixAudio(fl, fc_lf, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, fc_lf, 0.4142, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 3 Channels L,R,C or L,R,S or L,R,LFE -> Stereo
-[NoImage] function c3_stereo(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] l = MixAudio(fl, fc, 0.5858, 0.4142)
-[NoImage] r = MixAudio(fr, fc, 0.5858, 0.4142)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> Dolby ProLogic
-[NoImage] function c6_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 5)
-[NoImage] sr = GetChannel(a, 6)
-[NoImage] bc = MixAudio(sl, sr, 0.2265, 0.2265)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3205, 0.2265)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3205, 0.2265)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,SL,SR -> Dolby ProLogic
-[NoImage] function c5_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] bc = MixAudio(sl, sr, 0.2265, 0.2265)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3205, 0.2265)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3205, 0.2265)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,LFE,SL,SR -> Dolby ProLogic
-[NoImage] function c52_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] bc = MixAudio(sl, sr, 0.2929, 0.2929)
-[NoImage] l = MixAudio(fl, bc, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, bc, 0.4142, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,LFE,S -> Dolby ProLogic
-[NoImage] function c53_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] bc = GetChannel(a, 5)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.4142, 0.2929)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.4142, 0.2929)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 0.2929)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -0.2929)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels Quadro L,R,SL,SR -> Dolby ProLogic
-[NoImage] function c4_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 3)
-[NoImage] sr = GetChannel(a, 4)
-[NoImage] bc = MixAudio(sl, sr, 0.2929, 0.2929)
-[NoImage] l = MixAudio(fl, bc, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, bc, 0.4142, -1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels L,R,LFE,S -> Dolby ProLogic
-[NoImage] function c42_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] bc = GetChannel(a, 4)
-[NoImage] l = MixAudio(fl, bc, 0.5858, 0.4142)
-[NoImage] r = MixAudio(fr, bc, 0.5858, -0.4142)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels L,R,C,S -> Dolby ProLogic
-[NoImage] function c43_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] bc = GetChannel(a, 4)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.4142, 0.2929)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.4142, 0.2929)
-[NoImage] l = MixAudio(fl_fc, bc, 1.0, 0.2929)
-[NoImage] r = MixAudio(fr_fc, bc, 1.0, -0.2929)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 3 Channels L,R,S -> Dolby ProLogic
-[NoImage] function c3_dpl(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] bc = GetChannel(a, 3)
-[NoImage] l = MixAudio(fl, bc, 0.5858, 0.4142)
-[NoImage] r = MixAudio(fr, bc, 0.5858, -0.4142)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5.1 Channels L,R,C,LFE,SL,SR -> Dolby ProLogic II
-[NoImage] function c6_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 5)
-[NoImage] sr = GetChannel(a, 6)
-[NoImage] ssl = MixAudio(sl, sr, 0.2818, 0.1627)
-[NoImage] ssr = MixAudio(sl, sr, -0.1627, -0.2818)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3254, 0.2301)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3254, 0.2301)
-[NoImage] l = MixAudio(fl_fc, ssl, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, ssr, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,C,SL,SR -> Dolby ProLogic II
-[NoImage] function c5_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] fc = GetChannel(a, 3)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] ssl = MixAudio(sl, sr, 0.2818, 0.1627)
-[NoImage] ssr = MixAudio(sl, sr, -0.1627, -0.2818)
-[NoImage] fl_fc = MixAudio(fl, fc, 0.3254, 0.2301)
-[NoImage] fr_fc = MixAudio(fr, fc, 0.3254, 0.2301)
-[NoImage] l = MixAudio(fl_fc, ssl, 1.0, 1.0)
-[NoImage] r = MixAudio(fr_fc, ssr, 1.0, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 5 Channels L,R,LFE,SL,SR -> Dolby ProLogic II
-[NoImage] function c52_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 4)
-[NoImage] sr = GetChannel(a, 5)
-[NoImage] ssl = MixAudio(sl, sr, 0.3714, 0.2144)
-[NoImage] ssr = MixAudio(sl, sr, -0.2144, -0.3714)
-[NoImage] l = MixAudio(fl, ssl, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, ssr, 0.4142, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
-[NoImage] # 4 Channels Quadro L,R,SL,SR -> Dolby ProLogic II
-[NoImage] function c4_dpl2(clip a)
-[NoImage] {
-[NoImage] fl = GetChannel(a, 1)
-[NoImage] fr = GetChannel(a, 2)
-[NoImage] sl = GetChannel(a, 3)
-[NoImage] sr = GetChannel(a, 4)
-[NoImage] ssl = MixAudio(sl, sr, 0.3714, 0.2144)
-[NoImage] ssr = MixAudio(sl, sr, -0.2144, -0.3714)
-[NoImage] l = MixAudio(fl, ssl, 0.4142, 1.0)
-[NoImage] r = MixAudio(fr, ssr, 0.4142, 1.0)
-[NoImage] return MergeChannels(l, r)
-[NoImage] }
--[Information] [02.07.2017 15:27:55] AviSynth script
--[Information] [02.07.2017 15:27:56] Command line used: -V0 - "{0}"
--[Information] [02.07.2017 15:27:56] AviSynth script environment opened
--[Information] [02.07.2017 15:27:58] Script loaded
--[Information] [02.07.2017 15:27:58] Output Decoder
---[Information] [02.07.2017 15:27:58] Channels: 2
---[Information] [02.07.2017 15:27:58] Bits per sample: 16
---[Information] [02.07.2017 15:27:58] Sample rate: 48000
--[Information] [02.07.2017 15:27:58] Job command line: D:\Sonstiges\Videotools\MeGUI x86\tools\lame\lame.exe -V0 - "G:\2.mp3"
--[Information] [02.07.2017 15:27:58] Process started
--[Information] [02.07.2017 15:27:58] Standard output stream
--[Information] [02.07.2017 15:27:58] Standard error stream
---[Information] [02.07.2017 15:29:03] LAME 3.99.5 64bits (http://lame.sf.net)
---[Information] [02.07.2017 15:29:03] CPU features: SSE (ASM used), SSE2 (ASM used)
---[Information] [02.07.2017 15:29:03] polyphase lowpass filter disabled
---[Information] [02.07.2017 15:29:03] Encoding <stdin> to G:\2.mp3
---[Information] [02.07.2017 15:29:03] Encoding as 48 kHz j-stereo MPEG-1 Layer III VBR(q=0)

[olmicx]

It may help to change the masking settings. If not:
The last version with support for that ancient xvid version was MeGUI 2546. Either use xvid 1.3.x with the recent MeGUI or xvid 1.2.x with MeGUI 2546 (or older).

Btw why do you want to use such an old version?

Encode is better quality with the sharpening filter in the old version


And run it. If also crash is not a MeGUI problem.

This job crash showing xvid_encraw HELP because the -masking parameter is not supported by this old xvid_encraw, yes with the MeGUI default:

-masking [integer] : HVS masking mode (None:0, Lumi:1, Variance:2) (0)

i deleted -masking 1 value and added -lumimasking.
problem fixed. now i am using xvid_encraw-2009-05-30.
thanks:)

[Zetti]

x264 r2851 kmod is released.

[tebasuna51]

... I extracted wav with VirtualDub,..

Maybe the audio is not a PCM WAV.

To extract audio from avi use ..\megui\tools\avimux_gui\AVIMux_GUI.exe

- Load avi
- Select avi
- Generate data source from files
- Select desired audio track (remember Delay if any)
- Right click mouse button
- Extract binary

Gives error: Error parsing avs file
Input audio sample format to SSRC must be float. line 4

SSRC (http://avisynth.nl/index.php/SSRC) must convert the audio to float automatically.

[Morku]

MediaIno reports for the avi file:
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 2 h 41 min
Bit rate mode : Constant
Bit rate : 1 536 kb/s
Channel(s) : 2 channels
Sampling rate : 48.0 kHz
Bit depth : 16 bits
Stream size : 1.74 GiB (3%)
Alignment : Aligned on interleaves
Interleave, duration : 1000 ms (25.00 video frames)
Interleave, preload duratio : 1000 ms


I extracted a .raw file like you described with AVIMux-GUI.exe. It can't be loaded in MeGUI. Renaming to .wav doesn't work neither.

SSRC must convert the audio to float automatically.
Hm... seems like, it doesn't.

[tebasuna51]

MediaIno reports for the avi file:
Duration : 2 h 41 min
Stream size : 1.74 GiB (3%)

Do you have a avi file of 58 GB?
That can be a problem.

Try:

...\megui\tools\ffmpeg\ffmpeg.exe -i "1.avi" -vn -acodec pcm_s16le audio.wav

Hm... seems like, it doesn't.

Yep, seems a Avs+ bug, I must report it.

-[Information] Version: AviSynth+ 0.1 (r2508, MT, i386)
-[Information] AviSynth+: true
-[Information] MT: true
-[Information] Status: active

Work fine with AviSynth 2.60

BTW the input is already 48000 Hz then the SSRC(48000) is not needed.

[Morku]

Filesize is 68,1GB, but it never was a problem in past.

Now I think we are on the right track.

I replaced AVS+ with AVS260 ICL build.

When I load my avs and start encoding, I get an error:
--[Error] [03.07.2017 14:48:08] An error occurred: Input audio sample format to SSRC must be float.

Your example script still won't load, because of float error. So you are sure, it's a bug in AVS+?

This is interesting, because like you said my input already is 48000 Hz.
I wonder why it is a problem to keep the option "Sample Rate: Change to 48000 Hz".
When I check the log, MeGUI is able to detect when no change is needed, like this:
--[Information] [03.07.2017 14:48:07] ignoring downmix as there is only 2 channel(s)

So, I changed the option Sample Rate to: Keep Original Sample Rate.
Loaded my avs files and every audio encoding is fine! No Finalizing crash anymore!
Hz output is as input 48000 Hz.
But I like to keep the option Change to 48000 Hz for the case if input is not 48000 Hz and I don't need to check if I have to change the option.

So, going back to AVS+ r2508
now, keep the option to "Keep Original Sample Rate" and tried all my scripts in Queue twice. No crashes anymore!