MeGUI: bug reports and feature requests

[tebasuna51]

Sir I Want to Post My Log File But I Don't Know where to do this in web browser

Zip the log file and attach the zip (Go Advanced -> Additional Options -> Attach Files) or use pastebin (https://pastebin.com/)

[imsrk48]

Zip the log file and attach the zip (Go Advanced -> Additional Options -> Attach Files) or use pastebin (https://pastebin.com/)okay sir soon I'll post my log file

[imsrk48]

MeGUI Giving Error When Trying to Update 2911 to 2913

[imsrk48]

Something ReadOnlyMemory Error.

[StainlessS]

Again, post your log, will give better information than your, half error message.
You trying to update MeGUI on a write protected SD Card ? [the full size SD cards have a sliding switch to write protect them].

[imsrk48]

Again, post your log, will give better information than your, half error message.
You trying to update MeGUI on a write protected SD Card ? [the full size SD cards have a sliding switch to write protect them].no all are non protected disk. and today morning I'll post log file too.

[StainlessS]

By the way imsrk48, back in May, then again in September you posted in Avisynth Usage forum
Originally Posted by imsrk48
Please suggest me script for add .png logo on a video.

I posted a soilution for you, but you dont seem to have seen it, I also PM'ed you bout it, but you dont seem to receive PM via your Tapatalk thingy.

Here:- https://forum.doom9.org/showthread.php?p=1884066#post1884066

[imsrk48]

By the way imsrk48, back in May, then again in September you posted in Avisynth Usage forum


I posted a soilution for you, but you dont seem to have seen it, I also PM'ed you bout it, but you dont seem to receive PM via your Tapatalk thingy.

Here:- https://forum.doom9.org/showthread.php?p=1884066#post1884066No I Have Seen That. Just Forgot About Mention Again Sorry for that but I'm Everytime checking my Tapatalk

[kuchikirukia]

The mouseover tooltip in the x264 GUI says that qpmin and qpmax are ignored in constant quality mode. They're not.

[THEAST]

Not sure if MeGUI is still under active development but I have two feature requests:

- Possibility to close any active window in MeGUI, except the main window, using the Escape key. This will make navigating around MeGUI, especially when using the AVS script creator, much easier.
- Ctrl + G as shortcut for the "Go to Frame" option when video preview is open, similar to MPC-HC and VitrualDub.

[Barough]

MKVToolNix v40.0 is released
https://mkvtoolnix.download/windows/releases/40.0.0/

x264 0.158.2988 7817004
http://www.mediafire.com/file/rz2nn7s8p0sdcyn/x264-0.158.2988-7817004_Win_GCC920.7z/file

[kedautinh12]

I try access to megui.org but can't, why??

[kedautinh12]

My Megui still 2896, how update to 2913??

[tebasuna51]

Megui -> Options -> Extended -> Auto Update -> Use development update server -> Save
Megui -> Tools -> Update -> Show all packages -> Enable all packages -> Update

[kedautinh12]

Megui -> Options -> Extended -> Auto Update -> Use development update server -> Save
Megui -> Tools -> Update -> Show all packages -> Enable all packages -> Update

Thanks

[kedautinh12]

But, in Megui x64 i have error when close megui "The profile could not be saved. If you ignore this problem, data may be lost"

[tebasuna51]

Put the full path of your MeGUI folder.
Do you have rigths to write in that folder?

[LigH]

In general, do not install MeGUI inside the UAC protected "Program Files". It saves configuration files in its own installation directory, instead of %PROGRAMDATA% or %APPDATA% (legacy issue of ages before Vista).

[stax76]

I've implemented an update routine for mpv.net this week and what I've discovered is that if you move a folder to 'Program Files' using File Explorer than this folder is writable without admin rights!

[mini-moose]

x264 binaries are now here:
https://artifacts.videolan.org/x264/release-win64/
https://artifacts.videolan.org/x264/release-win32/

Zathor, may want to update on megui

[kedautinh12]

Thank anyone ������

[Barough]

x265 v3.2+15-04db2bfee5d6 (https://www.mediafire.com/file/ym8fls6a3dgnfgf/x265-3.2+15-04db2bfee5d6_Win_GCC920.7z/file) (32 & 64-bit 8/10/12bit Multilib Windows Binaries) (GCC 9.2.0)
https://bitbucket.org/multicoreware/x265/commits/branch/default

[kedautinh12]

I think need function import .avs, .avsi to save time like function Load DLL in tab scripts on avisynth script creator

[Bazzu85]

Yes, seems than the error: Ignoring subtitle track as it is too small
abort all the subtitle management.

It is a bug for Zathor, maybe after holidays...

sorry for stressing...

but are you working or have resolved the bug? thx

[kedautinh12]

https://github.com/HolyWu/L-SMASH-Wo...ks_20191127.7z (built by HolyWu)

when i decoding LWLibavVideoSource("***.ts",repeat=true) with repeat=true can Fix MPEG-2 decoding issue with RFF flags (cause decoding video with duration don't match duration of audio) (patched by maki-rxrz) and Fix interlaced H.264 decoding issue in some files. Very nice
Example: https://drive.google.com/file/d/1rUauSk-C-QxYxxJDgkFGZDV5CiiGomr1/view

[RyaNJ]

I've added DGIndexNV to my installation of MeGUI and have configured the paths and license and whatnot. I have VapourSynth x64 installed but every time I attempt to use DGIndexNV it keeps stating that the 32-bit binaries cannot be loaded into the 64-bit AviSynth.

I don't understand why it's saying that since, as far as I know the current DGIndexNV is x64? Does anyone have a clue what might be going on here?

Cheers.

[Taurus]

I don't understand why it's saying that since, as far as I know the current DGIndexNV is x64? Does anyone have a clue what might be going on here?
In the DGDecodeNV package is a 32bit and a 64bit version of DGIndexNV.
Take your poison.
Make sure you put the right one to your plugin folder.

[RyaNJ]

In the DGDecodeNV package is a 32bit and a 64bit version of DGIndexNV.
Take your poison.
Make sure you put the right one to your plugin folder.

I understand that. I have the 64-bit package added into the tools folders and configured via the settings.

I wasn't aware that I had to drop other bits anywhere else?

[leon]

Just tried to encode with MeGUI after a while and throws an error out of nowhere. Seems like it wrongly detects the 32-bit AviSynth as being 64-bit. Tried with both portable and installed AviSynth.

[Error] Log
-[Information] Versions
--[Information] MeGUI: 2913 x86
--[Information] MeGUI Debug Data: available
--[Information] Update Check: Disabled
--[Information] System Information
---[Information] Operating System: Windows 7 Ultimate x64 SP1 (6.1.65536.7601)
---[Information] .NET Framework: 4.0 (4.0.0.0)
---[Information] .NET Framework: 4.8 (4.8.03761)
---[Information] Redistributables
----[Information] Microsoft Visual C++ 2008 x64: 9.0.21022
----[Information] Microsoft Visual C++ 2008 x86: 9.0.21022
----[Information] Microsoft Visual C++ 2010 x64: 10.0.40219
----[Information] Microsoft Visual C++ 2010 x86: 10.0.40219
----[Information] Microsoft Visual C++ 2012 x64: 11.0.61030
----[Information] Microsoft Visual C++ 2012 x86: 11.0.61030
----[Information] Microsoft Visual C++ 2013 x64: 12.0.30501
----[Information] Microsoft Visual C++ 2013 x86: 12.0.30501
----[Information] Microsoft Visual C++ 2015-2019 x64: 14.23.27820
----[Information] Microsoft Visual C++ 2015-2019 x86: 14.23.27820
---[Information] DPI: 100% (96/96)
---[Information] Monitor 1
----[Information] Resolution: 1360x768
----[Information] Primary Screen: True
--[Information] Component Information
---[Information] Haali Media Splitter: 1.13.138.14 (14-04-2013)
---[Information] Haali DSS2: (14-04-2013)
---[Information] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
---[Information] MediaInfo: 18.05.0.0 (08-05-2018)
---[Information] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
---[Information] 7z: 9.20 (18-11-2010)
--[Information] AviSynth Information
---[Information] AviSynth Wrapper
----[Information] Version: 1.0.2847.0
----[Information] Date: 06-05-2018
----[Information] Interface: 3
---[Information] AviSynth
----[Information] AviSynth Status: ignored as portable build is forced
---[Information] AviSynth portable
----[Information] File Version: 0.1
----[Information] File Date: 20-12-2018
----[Information] File Name: AviSynth+ 0.1 (r2772, MT, i386)
----[Information] File Path: c:\program files\megui\avisynth.dll
----[Information] AviSynth Version: AviSynth+ 0.1 (r2772, MT, i386)
----[Information] AviSynth+: true
----[Information] AviSynth MT: true
----[Information] AviSynth Status: active
-[Information] Update detection
--[Information] [15/12/2019 03:24:29] Automatic update is disabled
--[Information] [15/12/2019 03:24:29] Using cached update config and server: http://megui.org/auto/
--[Information] [15/12/2019 03:24:29] No package requires an update
-[Information] FileIndexer
--[Information] [15/12/2019 03:24:42] MediaInfo
---[Information] File: C:\1.mp4
---[Information] General
----[Information] Format: MPEG-4
----[Information] FileSize: 13634107
----[Information] PlayTime: 00:00:48.482
---[Information] Video
----[Information] ID: 2
----[Information] StreamOrder: 1
----[Information] CodecID: avc1
----[Information] CodecIDInfo: Advanced Video Coding
----[Information] Format: AVC
----[Information] FormatInfo: Advanced Video Codec
----[Information] Width: 1280
----[Information] Height: 720
----[Information] FrameCount: 1453
----[Information] FrameRate: 29.970
----[Information] FrameRateOriginal: 29.970
----[Information] FrameRateMode: CFR
----[Information] FrameRateModeString: Constant
----[Information] Duration: 00:00:48.482
----[Information] ScanType: Progressive
----[Information] Bits Depth: 8
----[Information] AspectRatio: 1.778
----[Information] AspectRatioString: 16:9
----[Information] PixelAspectRatio: 1.000
---[Information] Audio
----[Information] ID: 1
----[Information] StreamOrder: 0
----[Information] CodecID: mp4a-40-2
----[Information] Format: AAC
----[Information] FormatInfo: Advanced Audio Codec
----[Information] FormatProfile: LC
----[Information] SamplingRate: 44100
----[Information] SamplingRateString: 44.1 kHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode: VBR
----[Information] [15/12/2019 03:24:42] The language information is not available for this track. The default MeGUI language has been selected.
-[Information] Log for job29 (idx, 1.mp4 -> 1.mp4.lwi)
--[Information] [15/12/2019 03:24:51] Started handling job
--[Information] [15/12/2019 03:24:51] Preprocessing
--[Information] [15/12/2019 03:24:52] AviSynth script
---[NoImage] LoadPlugin("C:\Program Files\MeGUI\tools\lsmash\LSMASHSource.dll")
---[NoImage] LSMASHVideoSource("C:\1.mp4")
--[Information] [15/12/2019 03:24:55] Postprocessing
---[Information] [15/12/2019 03:24:58] Deleting intermediate files
--[Information] [15/12/2019 03:24:58] Job completed
-[Error] Log for job30 (video, 1.mp4.avs -> 1.mp4.264)
--[Information] [15/12/2019 03:25:41] Started handling job
--[Information] [15/12/2019 03:25:41] Preprocessing
--[Information] [15/12/2019 03:25:41] AviSynth input script
---[NoImage] # Set DAR in encoder to 16 : 9. The following line is for automatic signalling
---[NoImage] global MeGUI_darx = 16
---[NoImage] global MeGUI_dary = 9
---[NoImage] LoadPlugin("C:\Program Files\MeGUI\tools\lsmash\LSMASHSource.dll")
---[NoImage] LSMASHVideoSource("C:\1.mp4")
---[NoImage] #deinterlace
---[NoImage] #crop
---[NoImage] #resize
---[NoImage] #denoise
---[NoImage] #ChangeFPS(25000, 1000)
---[NoImage] #Trim(424, 19670)
---[NoImage] #AssumeFPS(22000, 1000)
--[Information] [15/12/2019 03:25:42] resolution: 1280x720
--[Information] [15/12/2019 03:25:42] frame rate: 30000/1001
--[Information] [15/12/2019 03:25:42] frames: 1453
--[Information] [15/12/2019 03:25:42] length: 00:00:48.482
--[Information] [15/12/2019 03:25:42] aspect ratio: 16:9 (1.778)
--[Information] [15/12/2019 03:25:42] color space: I420
--[Information] [15/12/2019 03:25:42] changing --ref to 9
--[Information] [15/12/2019 03:25:42] Job command line: "cmd.exe" /c ""C:\Program Files\MeGUI\tools\ffmpeg\ffmpeg.exe"
-loglevel level+error -i "C:\1.mp4.avs" -strict -1 -f yuv4mpegpipe - | "C:\Program Files\MeGUI\tools\x264\x264.exe"
--level 4.1 --preset veryslow --tune film --crf 26.0 --keyint 300
--qpmin 10 --qpmax 51 --vbv-bufsize 78124 --vbv-maxrate
62500 --no-fast-pskip --colorprim bt709 --transfer bt709
--colormatrix bt709 --sar 1:1 --frames 1453 --output "C:\1.mp4.264" --stdin y4m -"
--[Information] [15/12/2019 03:25:42] Process started
--[Information] [15/12/2019 03:25:42] Standard output stream
--[Error] [15/12/2019 03:25:42] Standard error stream
---[Information] [15/12/2019 03:25:42] [avisynth @ 00000000005617c0] [error] Cannot load a 32 bit DLL in 64 bit Avisynth:
'C:/Program Files/MeGUI/tools/lsmash/LSMASHSource.dll'.
---[Information] [15/12/2019 03:25:42] (C:\1.mp4.avs, line 4)
---[Information] [15/12/2019 03:25:42] [error] C:\1.mp4.avs: Unknown error occurred
---[Error] [15/12/2019 03:25:42] y4m [error]: bad sequence header magic
---[Error] [15/12/2019 03:25:42] x264 [error]: could not open input file `-'
--[Error] [15/12/2019 03:25:42] Process exits with error: 0xFFFFFFFF (-1)
--[Information] [15/12/2019 03:25:42] Job completed



Don't know what's wrong but it doesn't let me attach the txt file.

[tebasuna51]

@leon
--[Information] MeGUI: 2913 x86
...
----[Information] AviSynth Status: ignored as portable build is forced
----[Information] AviSynth Version: AviSynth+ 0.1 (r2772, MT, i386)
...
-[Information] Log for job29 (idx, 1.mp4 -> 1.mp4.lwi)
---[NoImage] LoadPlugin("C:\Program Files\MeGUI\tools\lsmash\LSMASHSource.dll")
---[NoImage] LSMASHVideoSource("C:\1.mp4")
--[Information] [15/12/2019 03:24:58] Job completed
...
-[Error] Log for job30 (video, 1.mp4.avs -> 1.mp4.264)
...
--[Information] [15/12/2019 03:25:42] Job command line: "cmd.exe" /c ""C:\Program Files\MeGUI\tools\ffmpeg\ffmpeg.exe"
-loglevel level+error -i "C:\1.mp4.avs"
...
---[Information] [15/12/2019 03:25:42] [avisynth @ 00000000005617c0] [error] Cannot load a 32 bit DLL in 64 bit Avisynth:
- Using last MeGUI version and AviSynth portable 32 bits

- The job29 work fine with the .avs (all 32 bits)

- The job30 crash with the same .avs, maybe your C:\Program Files\MeGUI\tools\ffmpeg\ffmpeg.exe is 64 bit, must be 32 bit.

Check it:

[leon]

@tebasuna51

That was it, I had accidentally replaced it with a 64-bit ffmpeg. Thank you.

[Barough]

x265 v3.2+22-a8a2c4c37267 (http://www.mediafire.com/file/6mb2m4dabqsjpni/x265-3.2%252B22-a8a2c4c37267_Win_GCC920.7z/file) (32 & 64-bit 8/10/12bit Multilib Windows Binaries) (GCC 9.2.0)
https://bitbucket.org/multicoreware/x265/commits/branch/default

[hello_hello]

I think need function import .avs, .avsi to save time like function Load DLL in tab scripts on avisynth script creator

It's not a bad idea, but if you install Avisynth and put plugins and avsi scripts in the "installed" Avisynth plugins folder they'll be auto-loaded when Avisynth runs, even if MeGUI is using it's own portable version of Avisynth. I'd actually forgotten the script creator has a section for loading plugins "manually" as I haven't needed to use it for a long time.

[imsrk48]

Dear Sir Why You Removed Directshowsource and Avisource Support in Latest Build?

[tebasuna51]

Not removed, only not recommended:

[imsrk48]

Not removed, only not recommended:i have tried to Enable it but not working even i have changed different Windows and tried but not working Sir.

[imsrk48]

Not removed, only not recommended:anyway I'll try again

[hello_hello]

imsrk48,
You have to open a file as the video input for the script creator to be offered a Avisource/DirectshowSource choice, not with the file indexer. A window will popup asking how you want to open the video, and Avisource or DirectshowSource should be a choice for most file types.

Keep in mind, if there's an existing index file for the source in the same folder, MeGUI will probably just use it without giving you a choice.

[imsrk48]

imsrk48,
You have to open a file as the video input for the script creator to be offered a Avisource/DirectshowSource choice, not with the file indexer. A window will popup asking how you want to open the video, and Avisource or DirectshowSource should be a choice for most file types.

Keep in mind, if there's an existing index file for the source in the same folder, MeGUI will probably just use it without giving you a choice.are you trying to say i don't know about MeGUI?

for your kind information i know MeGUI very well. I'm not a beginner dear sir

[StainlessS]

imsrk48, H.H, is just trying to help.

[imsrk48]

imsrk48, H.H, is just trying to help.My Pleasure Sir. But I'm Not a Begginer for MeGUI I've faced issues that's why asked why not getting Directshowsource

[imsrk48]

imsrk48,
You have to open a file as the video input for the script creator to be offered a Avisource/DirectshowSource choice, not with the file indexer. A window will popup asking how you want to open the video, and Avisource or DirectshowSource should be a choice for most file types.

Keep in mind, if there's an existing index file for the source in the same folder, MeGUI will probably just use it without giving you a choice.now fixed i have reset Complete megui and then setup again

[kuchikirukia]

Is there some known issue with 2896 with heavy scripts? A:

QTGMC()
srestore(frate=23.976)

... absolutely chokes it. (like 0.04 fps) Going back to the old standby of 2525 and it's fine.

[kedautinh12]

I see megui offer some .ts file use DGIndex but video encoded audio don't sync with video, same error with L-Smash
Video test: https://drive.google.com/a/my.smccd....w?usp=drivesdk
After i was changed to ffms2 and audio can sync with video

Alternatively, megui offer some .ts with L-smash and it's work perfectly
Video test: https://drive.google.com/a/my.smccd....w?usp=drivesdk

[kedautinh12]

FFMS2 2.23.1 (w/ FFmpeg 4.2.2) compiled by l33tmeatwad
https://forum.doom9.org/showthread.php?p=1894414#post1894414

[tebasuna51]

I see megui offer some .ts file use DGIndex but video encoded audio don't sync with video, same error with L-Smash
Video test: https://drive.google.com/a/my.smccd....w?usp=drivesdk
After i was changed to ffms2 and audio can sync with video

Alternatively, megui offer some .ts with L-smash and it's work perfectly
Video test: https://drive.google.com/a/my.smccd....w?usp=drivesdk

Your links are broken.

Here are ok: https://forum.doom9.org/showthread.php?p=1894665#post1894665
Please remember rule 8:

8) No cross posting. Post your message once, to the appropriate forum and nowhere else or it will be locked or deleted without warning.

Your first video:
TS, 1 video track, 1 audio track, 0:04:22, 60i /1.001
1: h264/AVC, 1440x1080 60i /1.001 (16:9)
2: AAC, 2.0 channels, 123kbps, 48kHz
Video track 1 contains 15704 fields.

Can't be decoded by DGIndex because only support MPEG1/2 video.
The MPEG4-AVC (h264) video need DGIndexNV or Lsmash or ffms2, all of them works fine for me without async (15704 fields -> -stripPulldown -> 6281 progressive frames 23.976 -> 4:22 like audio)

Your second video:
TS, 1 video track, 1 audio track, 0:02:31, 60i /1.001
1: MPEG2, 1440x1080 60i /1.001 (16:9)
2: AAC, 2.0 channels, 256kbps, 48kHz, -7ms
Video track 1 contains 3657 frames and 824 fields.

Some more info from DGIndexNV:
CODED frames 4069 135,769 seg
PLAYBACK frames 4523 150,917 seg
49.69% FILM

There are a mixed of frames and fields, using MeGUI File Indexer and Avs Script Creator we obtain:
Output
Decoder MeGUI Analyse frames fps Duration MeGUI fps correction
------------------ -------------- ------ ------ -------- ---------------------------------
DGIndex Hybrid film 3821 23.976 2:39.36 tfm(order=1).tdecimate(hybrid=1)
DGIndexNV Hybrid film 3618 23.976 2:30.90 tfm(order=1).tdecimate(hybrid=1)
LWLibavVideoSource Partially film 4069 26.962 2:30.91 tfm(order=-1).tdecimate(hybrid=3)
FFVideoSource not detected 4523 29.970 2:30.91 (fpsnum=30000, fpsden=1001)

With DGIndex there are async with a video 9 seconds long.
With LWLibavVideoSource we obtain a fps not standard than can be problematic, the output frames are the same than CODED frames.
With FFVideoSource we force 29.970 (4523 PLAYED frames) but there are frames with double image.
Maybe the DGIndexNV decoder is the best option with MeGUI options.

[kedautinh12]

Your links are broken.

Here are ok: https://forum.doom9.org/showthread.php?p=1894665#post1894665
Please remember rule 8:



Your first video:


Can't be decoded by DGIndex because only support MPEG1/2 video.
The MPEG4-AVC (h264) video need DGIndexNV or Lsmash or ffms2, all of them works fine for me without async (15704 fields -> -stripPulldown -> 6281 progressive frames 23.976 -> 4:22 like audio)

Your second video:


Some more info from DGIndexNV:
CODED frames 4069 135,769 seg
PLAYBACK frames 4523 150,917 seg
49.69% FILM

There are a mixed of frames and fields, using MeGUI File Indexer and Avs Script Creator we obtain:
Output
Decoder MeGUI Analyse frames fps Duration MeGUI fps correction
------------------ -------------- ------ ------ -------- ---------------------------------
DGIndex Hybrid film 3821 23.976 2:39.36 tfm(order=1).tdecimate(hybrid=1)
DGIndexNV Hybrid film 3618 23.976 2:30.90 tfm(order=1).tdecimate(hybrid=1)
LWLibavVideoSource Partially film 4069 26.962 2:30.91 tfm(order=-1).tdecimate(hybrid=3)
FFVideoSource not detected 4523 29.970 2:30.91 (fpsnum=30000, fpsden=1001)

With DGIndex there are async with a video 9 seconds long.
With LWLibavVideoSource we obtain a fps not standard than can be problematic, the output frames are the same than CODED frames.
With FFVideoSource we force 29.970 (4523 PLAYED frames) but there are frames with double image.
Maybe the DGIndexNV decoder is the best option with MeGUI options.

Thanks

[LeXXuz]

You are right, even after execute 'Analyse' and detected like 'Interlaced' the Nvidia Deinterlacer remains grayed out.

Any news about the Nvidia deinterlacer not being selectable?

[tebasuna51]

@LeXXuz

With MeGUI 2913 still pending.

BTW you can open the script tab and modify the DGSource line, example:

DGSource("D:\Test\futbol-i.dgi", deinterlace=1)

[wthreex]

Cannot encode DTS to AAC

https://i.imgur.com/vd766Nx.png

Full log attached