HDConvertToX v. 3.0 (14/10/2010)

[OLP]

@OLP

Did you install the full Beta11 package and run the Beta 13 from that directory? There are some directory changes I believe that could cause problems.

Here's the link to Beta 11... http://www.64k.it/andres/data/hdconverttox/HDConvertToX-beta11.rar

thanks but i am not THAT stupid :D

[gasnyder]

thanks but i am not THAT stupid :D

Yeah, I've seen you post enough times where I figured you'd know what to do, but it never hurts to check the obvious sometimes. At least I didn't ask if your computer was plugged in. :-)

[OLP]

@ buzzqw


i did some more testing after reading the last 10 pages of this thread....

seems that for me analyzing any of my *.mkv has no result in the audio&subs tab
but the eac3toinfo.log in the analysis-folder is showing that there is audio and sub.

with the last 2.5.xx all is working fine! :confused:

maybe its again a problem of localized versions like in our former discussed problem (see around post #3245, page 163)

any ideas?

[Sharc]

@ buzzqw


...seems that for me analyzing any of my *.mkv has no result in the audio&subs tab
but the eac3toinfo.log in the analysis-folder is showing that there is audio and sub.

with the last 2.5.xx all is working fine! :confused:


Confirmed. Same problem here.

[buzzqw]

post a sample and the eac3to log from analysis folder

BHH

[OLP]

Hi buzzqw,

first sample ist the old sample from the problem we had in May 2010 (s.a. post #3231 to #3250)

http://www.mediafire.com/file/ngtftzrzizd/test-split.mkv

log:
eac3to v3.24
command line: "C:\Users\oliver\Downloads\HDConvertToX-beta11\applications\eac3to\eac3to.exe" "C:\Users\oliver\Downloads\test-split.mkv" -log="C:\Users\oliver\Downloads\HDConvertToX-beta11\analysis\eac3toinfo.log"
------------------------------------------------------------------------------
MKV, 1 video track, 3 audio tracks, 1 subtitle track, 0:41:33, 25p
1: h264/AVC, 576p25 (16:9)
2: AC3, German, 5.1 channels, 448kbps, 48kHz
3: AC3, English, 5.1 channels, 448kbps, 48kHz
4: AC3 Surround, English, 2.0 channels, 224kbps, 48kHz
5: Subtitle (VobSub), German
Bitstream parsing for track 5 failed. <WARNING>
Demuxing this track may still produce correct results - or not. <WARNING>



sample 2, a new one
http://www.mediafire.com/file/t97960o67rd7sz7/test-sample2.mkv

log:
eac3to v3.24
command line: "C:\Users\oliver\Downloads\HDConvertToX-beta11\applications\eac3to\eac3to.exe" "C:\Users\oliver\Downloads\test-sample2.mkv" -log="C:\Users\oliver\Downloads\HDConvertToX-beta11\analysis\eac3toinfo.log"
------------------------------------------------------------------------------
MKV, 1 video track, 2 audio tracks, 1 subtitle track, 0:01:00, 24p /1.001
1: h264/AVC, 1920x800 24p /1.001 (12:5)
2: DTS, German, 5.1 channels, 24 bits, 768kbps, 48kHz, 73ms
"German DTS 754kbps"
3: DTS, English, 5.1 channels, 24 bits, 1509kbps, 48kHz, 73ms
"English DTS 1509kbps"
4: Subtitle (SRT), German, "German"


both are working fine with 2.5.656.4363 (that was the beta that you gave me to solve the Problem from post #3231)
and also (beside the vobsub-problem) with 2.5.649.4295

i have also updated my ffdshow and haali within the testings, but no changes

greetings
OLP

[buzzqw]

sorry pal but i have no problem

http://www.64k.it/andres/data/Varie/test-split.PNG

mkvinfo is analyzing file correctly

i have re updated beta 13 http://www.64k.it/andres/data/hdconverttox/HDConvertToX-beta13.exe

but i haven't changed it... :confused:

BHH

[OLP]

great! :mad:

seems again a problem with mkvtoolnix.


i deleted the mkvtoolnix-folder from your app-folder and the result is the same...
is there a way to check if HDC is searching/finding and using mkvinfo in the right path?

[OLP]

GOTCHA!


i got it, but dont ask me why the following changes did it.....


i moved the mkvtoolnixfolder from app-folder to another location on my HDD.

then i make a new mkvtoolnix-folder in the app-folder and copy mkvinfo.exe and mkvextract.exe to this folder and did a test.
Got an errormessage that mkvinfo cannot be started cause missing *.dll
this was a good result. now i know that hdc try to start mkvinfo.

step by step i copyed the missing dlls and the data-folder.
I got it to work after i copyed 8 from 9 dlls.
the only dll i didnt copy was the "wxmsw28u_html_gcc_custom.dll".

i also didnt copy the doc, examples and locale folders.

now it worked...... :eek:

[OLP]

now the mkvtoolnix folder looks like this:

http://www.mediafire.com/i/?yvjgusfzbxrbnif

[buzzqw]

HDC launch mkvinfo from \application\mkvtoolnix

i suppose you have wrong path (for mkvtoolnix) in your registry.. and so the mkvinfo isn't finding needed dll

and.. wxmsw28u_html_gcc_custom.dll is already in my mkvtoolnix foder...

i could force to add as system path the mkvtoolnix on hdc folder...
but i can suggest a clean deinstall of mkvtoolnix, cccleaner, then a full reinstall of mkvtoolnix installer

BHH

[OLP]

i havent mkvtoolnix installed on my system.

that causes problems that i described in the May-Problem.

i am using the non-installer-version if i need it

i think the problem is the localisation of mkvtoolnix together with that fu*** dll that i didnt copy


no clue :)

[buzzqw]

glad you resolved

and report back if HDC is working well :)

BHH

[OLP]

seems to working now as described above

maybe you should only use this needed files (screenshot above) with your full package to eleminate this localiziation-probs

but anyway...strange

[buzzqw]

i use the standard (english) mkvtoolnix package
i will wait for your image approval

(if i am being a Mod...)

BHH

[OLP]

take this :)

http://www.mediafire.com/i/?yvjgusfzbxrbnif

[Sharc]

Still no luck here. The audio and sub tracks do not appear in the Audio and Subs selection tab.
Here the eac3toinfo.log which confirms that the streams exist:
MKV, 1 video track, 1 audio track, 2 subtitle tracks, 2:55:02, 25p
1: MPEG2, 576p25 (16:9)
2: AC3, German, 5.1 channels, 384kbps, 48kHz, dialnorm: -27dB
"3/2+1"
3: Subtitle (VobSub), German
4: Subtitle (VobSub), German
Bitstream parsing for tracks 3 and 4 failed. <WARNING>
Demuxing these tracks may still produce correct results - or not. <WARNING>

Added:
Ooops! It works when I remove the 'locale' folder :devil:

[OLP]

as i said...the fu***ing localization from mkvtoolnix is the problem. :devil:

so pls, buzzqw delete the not needed files and folders from your fullpackage so that it works for all without such riddles :)

[Sharc]

Hmmm, still a minor problem here:
The vobsubs are extracted as .sub and .idx but not converted into .sup (for m2ts container), and the .meta does not include the muxing of the subtitles. I have to do this manually.

[buzzqw]

@Sharc

http://www.64k.it/andres/data/hdconverttox/HDConvertToX-beta14.exe

and report back (i would like to close the beta)

BHH

[buzzqw]

also.. removed locales from next full package

BHH

[Sharc]

@Sharc

http://www.64k.it/andres/data/hdconverttox/HDConvertToX-beta14.exe

and report back (i would like to close the beta)


It's ok now. Thanks!

[buzzqw]

ok, thanks

i will publish an RC build and put on front page
if no bugs comes for a week i will close the rc status and put the HDC 3.0

BHH

[SeeMoreDigital]

Wow... we're up-to version 3

Great work mate :)

[buzzqw]

yea :) thanks SMD!

the leap is due to a total different procedure for audio and subs extraction
now it use mkvextract no more eac3to

more to come for audio handling.. i am thinking about leaving only one 2 options, directshow decoding and eac3to decoding

hdc is now "near" stable.. maybe i will take another route

BHH

[Atak_Snajpera]

the leap is due to a total different procedure for audio and subs extraction
now it use mkvextract no more eac3to
finally you have seen the light ;)

[buzzqw]

.. maybe :p

BHH

[Mr. Monte]

finally you have seen the light ;)

Buzz,

Just make sure we can keep AC3 and DTS tracks (copy audio).

Thanks

[buzzqw]

from my test audio copy is working

BHH

[Mr. Monte]

Hey buzz, if you link to this page, the latest 32 and 64 bit versions show up as they are released for FFdshow

http://sourceforge.net/projects/ffdshow-tryout/files/

Now at 3572

[buzzqw]

thanks Mr. Monte

added link on first page

BHH

[flebber]

HI Buzzqw

I have been throwing files at your RC1 release and it all seems to be solid I cannot get any errors. Its detecting and muxing all audio chapters and subs correctly.

I use MakeMkv lately to rip my DVD's and RC1 is solid on mkv input as far as my testing goes. :)

[ravid394]

I am getting some strange behavior from subtitles. I queue it all up, and then run through it. When it goes to mux it all together tells me that the subtilte file (idx maybe ) is not there, so I edit my queue to remove all lines except the java line for subs and the mux line. Run that, and it creates the idx file and then muxes it properly. So it is not that I edit any of the commands I simply re-run them and it works. What would you need me to post to show you what is going on? Seams like a very inconsistent error. Right, I am running the RC1

[Marshy]

We should thank Buzzqw for his hard work, but remember release candidate means exactly that. There are still some bugs e.g PAL DVD when analysed still sometimes gets read as NTSC rate and cropping can be problematic as can subtitles, but program is getting more stable each day and development is done freely. So we must be grateful as well guys!

Such a pity your very much lamented, magnificent and stable program AutoMKV could not have been developed like this HDConvert one. A testament to your hard work sir!

Nota Bene. Will your great sister progam Automen go to release candidate like this one as it is super for encoding(Xvid quality using Denoise filter gives excellent quality) but has some trouble encoding DVD using avi in XP still, especially with Mencoder option? Earlier builds seemed far more stable and never had this problem. Thanks

[stw500]

I am trying to convert a bluray to xvid oder divx. But the avi mux is always producing an error, not working anymore, has to be closed. I am using Win7 x64 and tried all the solutions in the Win7-Avimux-Thread. Dont know what to try next.

[azmoth]

Nota Bene. Will your great sister progam Automen go to release candidate like this one as it is super for encoding(Xvid quality using Denoise filter gives excellent quality) but has some trouble encoding DVD using avi in XP still, especially with Mencoder option? Earlier builds seemed far more stable and never had this problem. Thanks

Marshy I have had the same problems. The problem could be Mencoder build(s) or how GUI engages with programs via commands? That said other options e.g Handbrake can freeze too during encoding. Automen might not work correctly in some builds of XP etc.

The Forum for Automen is not very active as most users are here? so cannot pass on other users' comments regarding this bug. I personally feel for what it does(simplistically Automen is a much better program than HDConvertX and deserves much wider usage to get the bugs eradicated.:)

[eduguerra]

HI buzzqw, I use HDC 2.5 first and 3 now, and I can't decode audio and subtitles from m2ts files. I installed the software following your instuctions, and the rickatnight11 ones at last.
I use win 7 64bits and the report is the next. Thanks.


HDConvertToX v.3.0.688.4627 report

Input File: h:\películas hd\pequeños invasores 1080.m2ts ( H:\Películas HD\Pequeños Invasores 1080.m2ts )
Codec Video:
Width / Heigh : 1280 / 688
Framerate / Framecount: 23.976fps / 123431 frames
Duration(hh:mm:ss): 1:25:49
Aspect Ratio: 1.8605
Resized resolution: 1280 / 688
Crop Values : 0:0:0:0

Start Video Configuration ->
Encoding Settings: X264 Extreme Quality
Final Size: 20
Denoise Level: Super Light
Video Handling: Force DirectShowSource
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: MP3 Audio
Audio Bitrate/Quality: 128
Audio Channels: 2
MP3 Mode: abr
Normalize: On
Audio handling: Force DirectShowSource as decoder
Keep only core: On
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE
*** H:\Películas HD\Pequeños Invasores 1080.m2ts
H:\Películas HD\Pequeños Invasores 1080.m2ts

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On

Start Advanced AviSynth ->
ColorMatrix: On
-> End Advanced AviSynth
Start Muxing Options ->
<- End Muxing Options

Start Queue ->
prompt $d $t $_$P$G

echo job number: 0
"C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\applications\audio\wavi.exe" "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\analysis\hdconvert_audio_0_pequeños invasores 1080.m2ts.avs" - | "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\applications\audio\lame.exe" - -h --abr 128 "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\analysis\hdencodertox-pid1.mp3"
"C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\applications\x264\avs2yuv.exe" "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\analysis\hdconverttox_pequeños invasores 1080.avs" - | "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\applications\x264\x264-64bit.exe" - --stdin y4m --crf 20 --preset medium --ref 4 --subme 9 --direct auto --trellis 0 --me umh --b-adapt 2 --bframes 4 --threads auto --thread-input --sar 1:1 --output "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\analysis\hdconverttox_pequeños invasores 1080.h264" 1280x688 2>HDConvertToX_x264_job0.log
"C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\applications\MKVtoolnix\mkvmerge.exe" -o "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\hdconverttox_full_pequeños invasores 1080.mkv" --default-duration 0:23.976fps --compression 0:none "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\analysis\hdconverttox_pequeños invasores 1080.h264" --compression 0:none "C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\analysis\hdencodertox-pid1.mp3" --no-chapters --title " Done with HDConvertToX v.3.0.668.4474"
-> End Queue

AviSynth Script ->
Working with files: C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\analysis\hdconverttox_pequeños invasores 1080.avs
Load_Stdcall_plugin("C:\Users\Eduardo\Downloads\HDConvertToX-3.0rc1\filters\yadif.dll")
directshowsource("h:\películas hd\pequeños invasores 1080.m2ts",audio=false)
last = isRGB(last) ? ConvertToYV12(last) : last
last = isYUY2(last) ? ConvertToYV12(last) : last
LanczosResize(1280,688,0,0,-0,-0)
ColorMatrix(mode="Rec.709->Rec.601")
hqdn3d(1)
-> End AviSynth Script

[Theopolis]

When I try to encode I get the following error :

Error: Cannot initialize Windows Media Encoder object. Please verify that Windows Media Encoder 9 Series is correctly installed on your system.
If running 64-bit Windows, make sure that the version of cscript.exe used corresponds to the version (x86/x64) of WME9 installed on your system.

I Installed the Windows Expression 4 encoder.
Unfortunately this does not help.

What can I do to solve this:stupid:

[Sharc]

@buzzqw
v3.0 RC1
Source is .mkv (derived from original multi-segment .m2ts). Target is .m2ts
Sups are extracted correctly, but missing in .meta. I had to add them manually in the .meta.

[DottorLeo]

Hi, buzz!

I'm using HDC 3.0 RC1, for DVD backup testing and i would ask you if is it possible to add under Hardware Compatibiliy (or where you think is better), some restriction for DXVA compatibility on both SD and HD material. I ask this because if you try to decode a SD file encoded with h264 that doesn't follow properly the limitation for DXVA, it will be displayed with a lot of artifacts; instead, if you open it without DXVA acceleration the video is perfect :(

On MEGUI Custom x264 profiles (http://forum.doom9.org/showthread.php?t=139765) thread, there are some exaples of DXVA compliant profiles for x264.

Thank you and keep up the good work!

[nx6]

Hi, buzz!

I'm using HDC 3.0 RC1, for DVD backup testing and i would ask you if is it possible to add under Hardware Compatibiliy (or where you think is better), some restriction for DXVA compatibility on both SD and HD material. I ask this because if you try to decode a SD file encoded with h264 that doesn't follow properly the limitation for DXVA, it will be displayed with a lot of artifacts; instead, if you open it without DXVA acceleration the video is perfect :(

That's what the "Network Media Tank Compatibility" check box does for h264 encodes. The "Strict" check box limits B-frames further for compatibility with some more picky SAP chip sets. I use it for my encodes (not the Strict setting, just regular NMT checkbox only), and Media Player Classic plays the files with DXVA acceleration.

[Theopolis]

Hello Buzz,

I noticed that disable header removal doesn't fix a subtitle issue with my media player.
The mkvmerge part of the .bat which is created is as follows :

"C:\Program Files\HDConvertToX 3 RC1_AMI\applications\MKVtoolnix\mkvmerge.exe" -o "E:\Chandni_noFilter.MKV" --default-duration 0:29.970fps --compression 0:none "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\hdconverttox_vts_05_1.h264" --compression 0:none --language -1:hin "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\hdencodertox-pid3.mp4" --default-track -1:no "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\hdc_subs.idx" --chapters "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\chapters.txt"

When I change it to the following I have no more problems :

"C:\Program Files\HDConvertToX 3 RC1_AMI\applications\MKVtoolnix\mkvmerge.exe" -o "E:\Chandni_noFilter.MKV" --default-duration 0:29.970fps --compression 0:none "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\hdconverttox_vts_05_1.h264" --compression 0:none --language -1:hin "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\hdencodertox-pid3.mp4" --default-track -1:no --compression 0:none "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\hdc_subs.idx" --chapters "C:\Program Files\HDConvertToX 3 RC1_AMI\job8\chapters.txt"

I added an extra --compression 0:none

PS: When analysing file, there is a typo "previus" in stead of " previous"

[Theopolis]

Hi Buzz,

When I load an .ifo file It gets automatically analysed. It detect all available audio and subtitle stream. When I reanalyse the file it still detects the audio tracks but not the subtitle tracks.

I tried this on several DVD sources and allways get the same behaviour

Kind Regards.
Theopolis

[TraumaDoc]

Using the new version 3 RC

I like it and don't like it

Tried to convert a bluray from japan - a single stream file video image

Outputted to xvid in avi

Wanted 8 GB output file - and used the extra options for it to split the output file into 1.8 GB sized pieces

Instead, it created a single and quite horrible quality 769 MB file named as for example "video(1).avi" but never created any other parts

I'm confused

Also - I opened another bluray (50 I think) and converted it with horrible video-audio sync issue .... I checked again and the source video was being listed in HDConvetToX as something 333333333.33 frames/sec ........ a massive number

Ideas with this limited info?

[buzzqw]

@ravid394

any problem with ram ?

@Marshy @azmoth

it's a busy time. i have spent some free time on automen too.. i'll try to publish a new build

@eduguerra
don't use special characters like "ñ"
can cause some problem with avisynth and dos path

@Sharc
try this (and report back , since i haven't a such file)
http://www.64k.it/andres/data/hdconverttox/HDConvertToX-rc2.exe

@Theopolis
the subs were always compressed, even before 4.2.0
afaik mkvmerge has always compressed subs

about dvd subs: sorry pal i unable to replicate

@TraumaDoc
post the make report
xvidenc_raw handle bitrate over 10000kbp/s as 10000bp/s (not kilo..)
just use 9999 as manual bitrate or change codec

about sincro: i am unable to debug it, just make sure you have all corrected and updated decoder installed

BHH

[Sharc]

http://www.64k.it/andres/data/hdconverttox/HDConvertToX-rc2.exe[/url]

Sorry, subtitles are still missing in the meta with -rc2.

Secondly, audio is getting suddenly out of sync from about the second half of the movie onwards (by a fix delay of about 0.5 seconds). Is all this happening because you changed the extraction from eac3to to mkvextract?
With HDC v2.5 everything is fine: Subtitles recognized and audio is in perfect sync.

[azmoth]

buzzqw quote
@azmoth

it's a busy time. i have spent some free time on automen too.. i'll try to publish a new build


Thanks Buzzqw. By the way saw this reported and I checked it. I can confirm bug is there in Automen. Just in case you missed it posted here. Thanks.
Quote Marshy:

There is a bug reversion using encode xvid with avi. If you move it to "slower" setting and save settings, close program and then reopen the setting is always showing "balanced" instead of slower.

[verbatim2]

Buzz

Could you make it possible to do a simple check when you add a job to the queue: if job1(the folder) already exists go immediately to job 2

i need to mux myself, hdc cant do it so would be easier if each job has a new folder. every time i start hdc it put the stuff in job 1 instead of creating a new folder.

its not so good explained by me but i hope you know what i mean?

i understood, but isn't easier to move the job1 to another folder

Yeah but since i need to do muxing myself sometimes i forgot to rename job1 or move it...Cant you make an auto rename like a downloadmanager does?

if exist
job1
then rename
job1_1
job1_2
etc
?

i think i am not the only person with this problem and as far i know something from programming i think that are a few extra rules of code.
So if you want to fix it thanks in advance!

[Mrsash]

Great work Buzz. version 3 already

I have a couple of Mpeg videos cleared by Videoredo
The mpegs play fine. The problem is HDC creates files bigger than mpegs in size.

Conversion: Mpeg to x264+aac (crf 20 1 pass). Also HDC says these files does not have audio(Audio tacks none).

I wanted to upload a sample but dont know where. I uploaded it to rapidshare but dont know if I did it right.
http://rapidshare.com/files/422816168/1.mpg
Can you check please.
thanks

HDConvertToX v.3.0.688.4627 report

Input File: o:\new folder (2)\1.mpg ( O:\New Folder (2)\1.mpg )
Codec Video: mpeg
Width / Heigh : 720 / 576
Framerate / Framecount: 25.000fps / 266 frames
Duration(hh:mm:ss): 0:0:11
Aspect Ratio: 1.3334
Resized resolution: 704 / 528
Crop Values : 8:10:8:6

Start Video Configuration ->
Encoding Settings: X264 Extreme Quality ; Quality= 20
Final Size: 20
Denoise Level: Super Light
Video Handling: Use Best Decoder
Deinterlace: Interlaced
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Nero AAC Audio
Audio Bitrate/Quality: 0.3
Audio Channels: Original
Audio handling: Use Eac3to as demuxer
Keep only core: On
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On

Start Advanced AviSynth ->
ColorMatrix: On
Use MultiThreaded AviSynth: On
-> End Advanced AviSynth
Start Muxing Options ->
<- End Muxing Options

Start Queue ->
prompt $d $t $_$P$G

echo job number: 1
"F:\HDConvertToX\applications\dgmpgdec\dgindex.exe" -FO=0 -OM=0 -YR=2 -AIF=[o:\new folder (2)\1.mpg] -OF=[F:\HDConvertToX\analysis\movie] -exit -minimize
"F:\HDConvertToX\applications\x264\x264.exe" --crf 20 --preset medium --ref 4 --subme 9 --direct auto --trellis 0 --me umh --b-adapt 2 --bframes 4 --threads auto --thread-input --sar 1:1 --output "F:\HDConvertToX\analysis\hdconverttox_1.h264" "F:\HDConvertToX\analysis\hdconverttox_1.avs" 2>HDConvertToX_x264_job1.log
"F:\HDConvertToX\applications\MKVtoolnix\mkvmerge.exe" -o "O:\New Folder (2)\1.mkv" --default-duration 0:25.000fps --compression 0:none "F:\HDConvertToX\analysis\hdconverttox_1.h264" --no-chapters --title "1. Done with HDConvertToX v.3.0.668.4474"
-> End Queue

AviSynth Script ->
Working with files: F:\HDConvertToX\analysis\hdconverttox_1.avs
Load_Stdcall_plugin("F:\HDConvertToX\filters\yadif.dll")
SetMemoryMax(512)
SetMTMode(2,3)
Mpeg2Source("F:\HDConvertToX\analysis\movie.d2v")
Yadif(mode=0,order=-1)
LanczosResize(704,528,8,10,-8,-6)
ColorMatrix(d2v="F:\HDConvertToX\analysis\movie.d2v")
hqdn3d(1)
-> End AviSynth Script

[DJ-1]

Hi, just giving this application a tryout
My PC:
Pc running Q6600 CPU
CUDA capable Graphics card
Windows 7 Home Premium 64bit
4GB Ram


1st of all it asked me if I wanted to `switch to 64bit` upon start-up of app, now it doesnt do that now,.... abit weird.
Also, I tried just a quick sample conversion, it demuxes then stops. Does NOT encode :(



EDIT: just tried changing from Xvid in .MKV to Xvid in .Avi in settings and it tries open the AVIGUI MUX app. (it asks for `Run as Admin`), i hit ok,.... it then errors sying AVIMUX need to close as "hdencodertox-pid2.aac" is already in use ??

http://www.megaupload.com/?d=Z9IG0LPD
http://www.megaupload.com/?d=51JWDP20
http://www.megaupload.com/?d=7SBLGQYM

(YES, I Have chanfed the AviMux Settings for XP compatibility mode XP-SP2)