HDConvertToX v. 3.0 (14/10/2010)

[buzzqw]

...

i am thinking.. why overhwhelming the gui with double options, since i must replicate every switch for standard and save settings ? :mad:

i will trash the proposed change. Point.

i will add support for a INI file. users should mess manually with it.

BHH

edit: http://www.64k.it/andres/data/hdconverttox/hdc_prop2.PNG
this is ok

[SeeMoreDigital]

Looks good enough to eat.... Nice one Buzz :D

[buzzqw]

Thanks SMD

this is the ini saved

HDConvertToX v.1.6.293.2674

#
1 mean active
0 mean non active
#Crop&Resize
Crop Obey to AR=0
Follow ITU Resizing=0
No Resize Crop=0
Anamorphic=0
Set MOD Width=4
Set MOD Height=16
No AutoCrop=
#Video
Video Codec=XviD in AVI
Video Quality=2
Encoding Mode=2 pass
Allow CRF + 1 pass encoding=
Allow FFmpeg Encoder=
Allow Mencoder Encoder=
DirectX264=
Final MB Size=700
SAP=0
NMT=0
#Denoisers and Filters
Force AviSynth MT=
Set Denoise=Super Light
Deinterlace=none
Basic Filters=NONE
QMF Filters=NONE
MVDegrain=NONE
Use ColorMatrix=1
Use GreyScale=0
Free AVS String=
#Audio Options
Audio Codec=MP3 Audio
Audio bitrate=128
Audio Channels=2
Audio Bitrate Management=abr
Normalize Audio=1
Add AAC SBR/AAC+ Signal=0
Convert Audio to NTSC=0
Convert Audio to PAL=0
Resample Audio=NONE
Use Eac3to as demuxer and decoder=1
Force DirectShowSource as decoder=0
Force FFmpeg as decoder=0
Use NicAudio&SoundOut plugin=0
#Muxing Options
AutoChapter=0
AutoChapter Minutes=5
AutoTitle=
Subs Always On=1
#Project Options
Shutdown=
Reboot=
Suspend=
Multitemp=
Input Work Folder=
Workfolder=
Muxing Title=


any more options ?

BHH

[spida_singh]

Am i right in thinking we would edit the ini ourselves to load the options we want everytime the program starts, not had much use with ini files yet, also, will copy audio need to be added? As i use this all the time.

[buzzqw]

hdc will show a list of all ini, and you can load the ini in list
audio copy is present (since is a "audio codec")

BHH

[Sharc]

Thanks SMD

this is the ini saved

HDConvertToX v.1.6.293.2674
........
#Video
Video Codec=XviD in AVI
Video Quality=2
Encoding Mode=2 pass
Allow CRF + 1 pass encoding=
Allow FFmpeg Encoder=
Allow Mencoder Encoder=
DirectX264=
Final MB Size=700
CRF Value = 18
CQ Value = 2
SAP=0
NMT=0
.....

any more options ?

Fair enough, buzzqw. Your last GUI proposal plus such .ini serves the purpose perfectly IMHO and is open for future extensions - if needed :)

One suggestion for the #Video section:
Can you add:
CRF Value = 18
CQ Value = 2

[Sharc]

@buzzqw
Just a question:
The help text for the Final MB Size says "This value is the final MB size of the video". Is this really so, or is it the final size of video+audio+subtitles?

[buzzqw]

Fair enough, buzzqw. Your last GUI proposal plus such .ini serves the purpose perfectly IMHO and is open for future extensions - if needed :)

One suggestion for the #Video section:
Can you add:
CRF Value = 18
CQ Value = 2

already present .. this will be the FInal MB Size

@buzzqw
Just a question:
The help text for the Final MB Size says "This value is the final MB size of the video". Is this really so, or is it the final size of video+audio+subtitles?

it's the final size of audio+subs+video

edit: again on ini: if hdconverttox.ini is present HDC will load at start it, otherwise it will load the setting you want

BHH

[marklar]

what about this ?

BHH

For me personally it is not impotant whether all these settings are on GUI, or in INI files or in "hidden" TXT files. What am I really missing is the ability to set and save other settings that I always have to set to same values. The most important are encoding settings like encoding method and bitrate or quality for both audio and video codec (e.g. VBR with 0.5 quality for AAC audio and 1 pass quality with 19 CRF for video; I almost always use these values and I always have to set them manually. In MKV were these settings saved by "save settings" for example).

User usually does not need to set (change) them often, so I mean it does not matter, whether it is "save settings" on GUI, or INI for notepad or hidden files. More important is the ability to preset these settings and not the method, how to do it.

Thanks!

[noee]

this error should be fixed in latest update

are you using the 1.6.292.2659 or newer build ?

BHH

Yes, I am using 1.6.292.2659. I did not realize there was a newer build. I downloaded the latest update from the mirror and that is the version.

Also, I have another question:

Why does the analyze say that my ripped DVDs (SD material) are 1920x1080?

[buzzqw]

@marklar

you will be able to save and load all your settings :)


Why does the analyze say that my ripped DVDs (SD material) are 1920x1080

try delete the \temp folder

BHH

[noee]

try delete the \temp folder

BHH

Still doesn't matter, the analyse file shows my SD material (DVD) as 1920x1080.

Also, I noticed in my final mux (x264->MKV), the Display Aspect Ratio is showing as: 1.5. These are 16/9 (1.7777AR) DVDs.

[SeeMoreDigital]

Here you go: -

http://i42.tinypic.com/zk2839.png

[Sharc]

@noee
What happens if you just click on the resize slider with the mouse (or similar action)? I noticed that there is sometimes a problem with the automatic update of some values just after the Analyze File phase.

[buzzqw]

@noee

fixed in next update audio copying when source is ifo, first and first pgc is selected (please try the beta ini below)

could you please post the full make report of SD=1920*1080 ?

@SMD

thanks!

@ALL
first beta of INI design : http://www.64k.it/andres/data/hdconverttox/HDConvertToX_beta_ini.exe


BHH

[Sharc]

@buzzqw
first beta of ini design looks good!

Would it make sense to include "Save as ..." instead of just "Save"? This would allow us to store several *.ini, based on purpose (supporting the concept of profiles), e.g. one for DVD, one for .mts backup, and so on ....
Just an idea. Never mind if it's too complicated.

[noee]

I tried my test IFO. It still detects the rez as 1920x1080 (AR1.7778). DGIndex shows it properly at 720x480.

I choose the option "No Resize and Crop". I tried clicking it a few times and moving the slider. Still not working.

Now, when I hit "Generate Encode", Status says "Starting Encoding!!", but DGIndex runs (from the .bat), but it never goes any further.

It is failing on the x264 step. Apparently the AVS file is not present in the working Dir: 'D:\Temp\hdconverttox_vts_01_1.avs'.

Also, I have my working Dir set to another folder, but HDC still creates an empy "temp" folder in it's root and it also creates and empty "temp" folder under my specified working Dir.

[buzzqw]

@Sharc

... maybe.. i will look at this

EDIT: done

@noee
please post the make report

Also, I have my working Dir set to another folder, but HDC still creates an empy "temp" folder in it's root and it also creates and empty "temp" folder under my specified working Dir.
that's normal

I choose the option "No Resize and Crop". I tried clicking it a few times and moving the slider. Still not working.
what's mean ? you cannot move the slider while no resize and crop is checked

also in muxing string there is the correct audio ?

and.. could you please mail me the ifo and the first 10mb of vob ?

BHH

[noee]

Here is the make report. the "PID" naming problem appears to be fixed:

HDConvertToX v.1.6.295.2727 report

Input File: C:\Encodes\JA Test\VTS_01_1.vob
Codec Video: mpeg
Width: 1920
Heigh: 1080
Framerate: 29.970
Framecount: 18251
Duration(hh:mm:ss): 0:10:9
Aspect Ratio: 1.7778
Resized resolution: 1920 / 1080
Crop Left: 0
Crop Top: 4
Crop Right: 0
Crop Bottom: 4

Start Video Configuration ->
Encoding Settings: X264 in MKV
Encoding Preset: 7
Final Size: 20
Priority: idle
Denoise Level: Super Light
Use Best Decoder
Deinterlace: Film NTSC (29.97->23.976)
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Copy Audio
Audio Bitrate/Quality: 128
Audio Channels: 2
MP3 Mode: abr
SpeedUP: Off
SlowDonw: Off
Normalize: On
Use Eac3to as demuxer
-> End Audio Configuration

Full Audio List-> (*** mean selected)
*** 80: English (AC3 6ch, 0xBD 0x80) [0]

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
English 0 (0xBD 0x20) [0] wide
Francais 1 (0xBD 0x21) [0] wide
Espanol 2 (0xBD 0x22) [0] wide

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On
Encrust Subtitle in Video file: Off

Start Advanced AviSynth ->
Basic Filter: RemoveGrain(mode
QMF Filter: NONE
MVDegrain: NONE
FreeAVS String:
ColorMatrix: Off
GreyScale: Off
-> End Advanced AviSynth

Start Queue ->
"C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\applications\eac3to.exe" "C:\Encodes\JA Test\VTS_01_1.vob" 2: "D:\Temp\hdencodertox-pid2.ac3"
"C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\applications\x264.exe" --threads auto --thread-input --no-psnr --progress --keyint 250 --bframes 4 --mixed-refs --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --vbv-bufsize 14000 --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-adapt 2 --no-chroma-me --8x8dct --aud --aq-strength 1 --psy-rd 1.0:0.3 --sar 1:1 --output "D:\Temp\hdconverttox_VTS_01_1.h264" "D:\Temp\hdconverttox_VTS_01_1.avs"
"C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\applications\mkvmerge.exe" -o "d:\encodes\jatest3.mkv" --default-duration 0:23.976fps "D:\Temp\hdconverttox_VTS_01_1.h264" --language -1:eng "D:\Temp\hdencodertox-pid2.ac3" --chapters "D:\Temp\autochapters.txt" --title "Done with HDConvertToX"
-> End Queue

AviSynth Script ->
Working with files: D:\Temp\hdconverttox_VTS_01_1.avs
#HDConvertToX Avisynth Script
#
#Input File = C:\Encodes\JA Test\VTS_01_1.vob
#Original Resolution = 1920x1080
#Aspect Ratio = 1.7778
#Frame rate =29.970
#Number of Frames = 18251
#Lenght (hour:minutes:seconds) = 0:10:9
#Display Aspect Ratio = 1.7911
#Aspect Error = -0.7547
#
#Resized resolution = 1920 / 1080
#Crop Left = 0
#Crop Top = 4
#Crop Right = 0
#Crop Bottom = 4
#

try {
#Source File

#Insert Deinterlacer
tfm(last).tdecimate()

#Applying Resizing
#NO Resize and Crop requested

#Insert Filters As Requested

hqdn3d(1)
RemoveGrain(mode
}
catch (err) {
last=BlankClip()
converttoyv12()
subtitle(err)
trim(0,1500)
}
-> End AviSynth Script


I don't understand why it is normal for HDC to create all of these empty "temp" folders. They do not appear to be used.

If HDC starts up with "No Resize and Crop" checked, the slider is not disabled. It's not until you uncheck/check it again that the slider becomes disabled.

Sorry, I'm dial-up. It is impossible for me to send/recv large files.

[Sharc]

@Sharc

... maybe.. i will look at this

EDIT: done

You are incredibly fast .... !

[buzzqw]

Here is the make report. the "PID" naming problem appears to be fixed

I don't understand why it is normal for HDC to create all of these empty "temp" folders. They do not appear to be used.

If HDC starts up with "No Resize and Crop" checked, the slider is not disabled. It's not until you uncheck/check it again that the slider becomes disabled.

Sorry, I'm dial-up. It is impossible for me to send/recv large files.

i know i spam hd with temp folders.. but these temp are small and inoffensive ;)

thanks for the feedback about no resize!

at least the ifo ? should be small

You are incredibly fast .... !

my pleasure :p

BHH

[noee]

I think I was wrong earlier. Apparently the AVS is there. Here is the msg from x264:

avis [error]: unsupported input format (DIB )
x264 [error]: could not open input file 'D:\Temp\hdconverttox_vts_01_1.avs'

[Acid-Burn]

#####

[noee]

@BHH:

Also, I notice, when HDC starts up and "Copy Audio" is the Encode method (for Audio), the three comboboxes below it are enabled until the Encode combo is clicked.

[buzzqw]

@ALL
feel free to readownload the latest beta ini, some fixes applied

@noee

please open the analyze.avs in virtualdub, what is the error ?

hint: make sure you have installed ffdshow tryout and checked "enable dvd" support in mpeg2

edit:Also, I notice, when HDC starts up and "Copy Audio" is the Encode method (for Audio), the three comboboxes below it are enabled until the Encode combo is clicked.
you are rigth, the load settings make less sanity check than standard options

BUT don't warry , even if options are enable, HDC will ignore it

@Acid-Burn

dts encoding ISN't supported

and.. i don't know how eac3to handle dts to dts using Surcode (since i don't own it)

BHH

[Sharc]

Here possibly a bug:
I have 20 encoder profiles defined in the HDConvertToX_profile.txt. Works well.

Now it appears that for 1-pass encoding my setting for the quality slider is correctly stored in the .ini as say Video Quality=17, and the crf value (20) is correctly stored as Final MB size=20. Perfect.
However, when starting HDC and loading the HDConvertToX.ini, the initial quality slider setting is incorrect, showing only 10 steps. The quality slider changes to 20 steps after I re-select the Encoding Mode again, but then the crf value defaults to 16.
Something seems to be out of step ... ?

[noee]

please open the analyze.avs in virtualdub, what is the error ?

No errors at all. VDub opens it just fine.

[buzzqw]

@Sharc

fully understud

please redownload the beta ini

(don't tested, but should work)

edit @noee
are you sure you haven't checked "resize" in ffdshow ? or some other tweak ?

BHH

[noee]

@bhh:
I found the problem with HDC detecting the source rez. My default profile in FFDshow has resizing selected (1920x1080). HDC must be getting that number. When I turn resizing off, it returns the proper rez for SD.

IMO, this is a bug. HDC should not be using the resized value from FFDshow.

[buzzqw]

this isn't a bug, sorry.

hdc use directshowsource for analyzing file, AND ffdshow is a directshowfilter

if you are "used" to change ffdshow parameters, so.. on hdc check "force ffmpegsource"

BHH

[noee]

Okay, if you say so, but that seems counter-intuitive to me.

I just tried to Analyze with FFMpegSource and the same result: SD is still showing as 1920x1080.

Also, 2750 broke the Working Dir setting. Temp files are now back to the root of HDC, it's not respecting the Working Dir setting.

[buzzqw]

Also, 2750 broke the Working Dir setting. Temp files are now back to the root of HDC, it's not respecting the Working Dir setting.

should be fixed, thanks! (redownload the beta ini)

I just tried to Analyze with FFMpegSource and the same result: SD is still showing as 1920x1080.

that's strange, ffmpegsource DON'T use dss

please post the analyze.avs

BHH

[Sharc]

Just a note:
One has to make sure to store the .ini in the HDC program directory, because the "Load Custom Settings" will load the .ini from there only (no navigation).

A minor bug: When HDC loads the settings from the .ini, the text under the quality slider may still be wrong / not updated correctly.

[noee]

It appears even if I choose Force FFMPegSource it still uses DS:

Analyze.AVS:

#HDConvertToX Analyze Avisynth Script
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\DirectShowSource.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\FFMS2.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\autocrop.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\DGAVCDecode.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\DGDecode.dll")
directshowsource("C:\Encodes\JA Test\VTS_01_1.vob",audio=false)
last = isRGB(last) ? ConvertToYV12(last) : last
last = isYUY2(last) ? ConvertToYV12(last) : last
sep=" "
WriteFile("D:\Temp\info.txt", "Framecount","sep","Framerate","sep","WIDTH","sep","HEIGHT")
autocrop(mode=2,wmultof=4,hmultof=16,samples=34,aspect=0.000000,threshold=28,samplestartframe=125)
Trim(0,2)


BHH,
Just curious, why would you not go back to usings DGMPGDec for the MPEG2(IFO) decode, therefore, bypassing DS and getting correct source video rez?

This discussion about making things easy for the "noobie" regarding the INI file settings is not consistent with having to change FFDshow Resize settings in order to get a proper analyze from HDC. Does that not seem to be inconsistent from a "noobie" POV?

[buzzqw]

Just a note:
One has to make sure to store the .ini in the HDC program directory, because the "Load Custom Settings" will load the .ini from there only (no navigation).

that's correct.

A minor bug: When HDC loads the settings from the .ini, the text under the quality slider may still be wrong / not updated correctly.

thanks, fixed, feel free to redownload the beta ini

@noee

sorry pal, unable to replicate
make sure you have selected "Use FFmpegSource" , in source file info section (at top)

BHH

[Sharc]

thanks, fixed, feel free to redownload the beta ini

Perfect now, thanks.

[buzzqw]

This discussion about making things easy for the "noobie" regarding the INI file settings is not consistent with having to change FFDshow Resize settings in order to get a proper analyze from HDC. Does that not seem to be inconsistent from a "noobie" POV?

hdc will work without any ini.

about ffdshow i understand your question and point of view, but from a developer perspective, relying on dss is easy , more then often the only way to get accurate results.

i am sorry you have to mess around with resinzing in ffdshow, but you will got similar problem from megui/ripbot and several others advanced gui

i strongly doubt that this will change

BHH

[noee]

LOL, yes, I did. I even tried selecting it before opening the IFO and after, same result in the Analyze.AVS.

Is there some dependency in the order of events?

I'm using 2759. Are you sure we're on the same version and you're opening a SD DVD?

[buzzqw]

thanks noee
got it (only happen with ifo input)

redownload the beta ini

BHH

[noee]

hdc will work without any ini.

about ffdshow i understand your question and point of view, but from a developer perspective, relying on dss is easy , more then often the only way to get accurate results.

i am sorry you have to mess around with resinzing in ffdshow, but you will got similar problem from megui/ripbot and several others advanced gui

i strongly doubt that this will change

BHH

Okay, just keep in mind, that anybody who uses FFDshow as their DVD decoder and choose a resize != to the source video, will most likely have to change the settings everytime before using HDC.

I'm trying to use and FFDshow autoload profile right now to see if I can get by this.....

[noee]

@bhh:

I found the problem with the x264 load error in the AVS. I choose Filter RemoveGrain(mode=2). When I open the AVS, here is what it looks like:

RemoveGrain(mode

You must be using "=" as a delimiter or something like that for your parser, it's not writing the AVS properly.

2759 uses FFMpegSource for IFO now (if you force it), but it takes forever. It took over 15 minutes for a 9min video.

[buzzqw]

nasty.

i'll try to solve

edit fixed, redowload the beta ini

BHH

[Sharc]

When I change the video mode from a previous 1-pass to 2-pass by loading the corresponding .ini, the label in the Video tab stays at "CRF Value" instaed of changing to "Final MB Size". It updates only after I touch again the 2-pass selection. It's just a cosmetic issue, I suppose.

[noee]

Okay, that fixed it. The only remaining issue I have with SD (480p) material encoding is AR. The mux is setting it to 1.5 (720/480). How can I get the mux to set the proper AR with HDC? Is this an option you can add, like we had on AutoMKV?

Edit: So, maybe it's not the mux, but the encode? Either way, how do we do this in HDC?

[buzzqw]

@Sharc

only visual
i will look tomorrow

@noee
you can check the Display AR displayed

and .. btw.. if you have a mux of 1.5.. i suppose your dvd don't have black bars

you can manually change the Display AR

BHH

[noee]

The Display AR is set to 1.7778, but the encode is using 720/480=1.5. IOW, the Display AR is correct, but the encode comes out wrong. This SD sample is 16/9 with no black bars.

[buzzqw]

please post the encoding script and muxing string

afaik is mkvmerge that signal as 1.5

and btw.. 720x480 WITHOUT black bar isn't 16/9 (imho)

i can suppose the dvd is somewhat reauthored/reencoded

BHH

[noee]

I just took the DVD and used DVDShrink to copy it to the HD with no compression. I will try another DVD test sample.

Here is the DGIndex:
DGIndexProjectFile16
1
c:\encodes\ja test\vts_01_1.vob

Stream_Type=1
MPEG_Type=2
iDCT_Algorithm=6
YUVRGB_Scale=0
Luminance_Filter=0,0
Clipping=0,0,0,0
Aspect_Ratio=16:9
Picture_Size=720x480
Field_Operation=0
Frame_Rate=29970 (30000/1001)
Location=0,0,0,28994

Here is the encoder script:
#HDConvertToX Avisynth Script
#
#Input File = c:\encodes\ja test\vts_01_1.vob
#Original Resolution = 720x480
#Aspect Ratio = 1.7778
#Frame rate =29.970
#Number of Frames = 18251
#Lenght (hour:minutes:seconds) = 0:10:9
#Display Aspect Ratio = 1.7679
#Aspect Error = -1.2333
#
#Resized resolution = 716 / 400
#Crop Left = 2
#Crop Top = 0
#Crop Right = 2
#Crop Bottom = 0
#
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\AddGrain.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\AddGrainC.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\autocrop.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\Average.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\avss.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\ColorMatrix.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\deblock.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\Decomb.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\deen.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\degrainmedian.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\dfttest.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\DGAVCDecode.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\DGDecode.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\DirectShowSource.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\EEDI2.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\FFMS2.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\FFT3DFilter.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\FluxSmooth.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\frfun7.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\gradfun2db.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\hqdn3d.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\MSharpen.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\mt_masktools-26.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\mvtools.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\mvtools2.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\NicAudio.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\nnedi.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\RemoveDirtS.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\RemoveGrainS.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\RepairS.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\SangNom.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\SoundOut.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\TBilateral.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\TDeint.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\TIVTC.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\TTempSmooth.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\UnDot.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\UnFilter.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\VSFilter.dll")
LoadPlugin("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\yadifmod.dll")

Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\BlindDeHalo3_mt2.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\Deblock_QED_MT2.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\GradFun2DBmod.v1.3.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\Lem.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\LSFmod.v1.7.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\MCTemporalDenoise.v1.2.02.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\QMLF_3_motions.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\QMLF_5_motions.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\QMLF_7_motions.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\QMLF_9_motions.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\seesaw.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\spresso.avsi")
Import("C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\filters\Srestore.avsi")
try {
#Source File
mpeg2source("D:\Temp\movie.d2v")

#Insert Deinterlacer
tfm(last,d2v="D:\Temp\movie.d2v").tdecimate()

#Applying Resizing
#NO Resize and Crop requested

#Insert Filters As Requested

hqdn3d(1)
RemoveGrain(mode=2)
}
catch (err) {
last=BlankClip()
converttoyv12()
subtitle(err)
trim(0,1500)
}


Here is the .BAT:
"C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\applications\dgindex.exe" -FO=0 -OM=0 -YR=2 -AIF=[c:\encodes\ja test\vts_01_1.vob] -OF=[D:\Temp\movie] -exit -minimize
"C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\applications\eac3to.exe" "C:\Encodes\JA Test\VTS_01_1.vob" 2: "D:\Temp\hdencodertox-pid2.ac3"
"C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\applications\x264.exe" --crf 20 --threads auto --thread-input --no-psnr --progress --keyint 250 --bframes 4 --mixed-refs --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --vbv-bufsize 14000 --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-adapt 2 --no-chroma-me --8x8dct --aud --aq-strength 1 --psy-rd 1.0:0.3 --sar 1:1 --output "D:\Temp\hdconverttox_vts_01_1.h264" "D:\Temp\hdconverttox_vts_01_1.avs"
"C:\Documents and Settings\Mike Noe\My Documents\Utils\Conversion Tools\HDConvertToX\applications\mkvmerge.exe" -o "d:\encodes\jatest2.mkv" --default-duration 0:23.976fps "D:\Temp\hdconverttox_vts_01_1.h264" --language -1:eng "D:\Temp\hdencodertox-pid2.ac3" --chapters "D:\Temp\autochapters.txt" --title "Done with HDConvertToX"

[Sharc]

@buzzqw:
And another (more serious) bug:
When "No Resize & Crop" is activated, the --sar should be updated and not still consider the greyed-out crop values from the preceding file analysis.

[buzzqw]

@noee
hdc don't flag it as 1.5 but mkvmerge do it

i will look how to hack it

@Sharc

sorry pal, don't understud

the --sar is used only for anamorphic encoding. how anamorphic and no resize will change --sar ?

BHH