HDConvertToX v. 3.0 (14/10/2010)

[buzzqw]

yup...

no resize, no filters.. no colormatrix...= error

i will add a catch

BHH

[Sharc]

Could the "Free AVS String" be extended to allow insertion of a multi-line script?

Not sure if this is a bug:
Each tame a re-save a configuration the Multitemp=1 is reset to Multitemp=0.

[buzzqw]

maybe i fixed the multitemp.. could you redownload latest beta ini ? (i will check tomorrow)

free avs: try joining line with "." like undot().blur().sharp()
(anyway i will check it too)

BHH

[Sharc]

It also seems that "Insert chapter every" remains always checked, even though I set AutoChapter=0 in the .ini.

[akapu]

It also seems that "Insert chapter every" remains always checked, even though I set AutoChapter=0 in the .ini.

Download new beta version .... this problem solved in new version...

[Sharc]

ok, thanks! (but Multitemp is still reset in latest beta)

[Sharc]

yup...

no resize, no filters.. no colormatrix...= error

i will add a catch
ok, thanks.
I enabled colormatrix now for a test. Encoding starts as expected, but only the 1st vob out of 7 is encoded.
(Audio and subs were demuxed for all vobs as expected).

[Acid-Burn]

#####

[Chengbin]

buzzqw

This is a continuation of the AutoMKV problem I had with a video.

After using HDC, the encoding is also messed up, but in a different way. eac3to will say video overlap over 8 (or 9) frames at time (after around 00:55:00). It also exceeds the playtime (01:44:15 vs 01:47:28)

The video is correctly encoded all the way to that point, then it just messes up in the framerate.

Using other decoders don't work, it is more like I didn't test it. The reason is there is a strange problem when I use other decoders. x264's speed is GREATLY reduced. I'm getting around 18.5fps with eac3to, but with the other decoders I'm getting around 3-4fps. Also, there are 4 ffdshow icons on my tray for some reason. Is that a possible cause?

[buzzqw]

ok, thanks! (but Multitemp is still reset in latest beta)

fixed, redownload beta ini

ok, thanks.
I enabled colormatrix now for a test. Encoding starts as expected, but only the 1st vob out of 7 is encoded.
(Audio and subs were demuxed for all vobs as expected).

... Sharc.. the make report... (also fixed the noresize/nofilters bug)

buzzqw

Using other decoders don't work, it is more like I didn't test it. The reason is there is a strange problem when I use other decoders. x264's speed is GREATLY reduced. I'm getting around 18.5fps with eac3to, but with the other decoders I'm getting around 3-4fps. Also, there are 4 ffdshow icons on my tray for some reason. Is that a possible cause?

have you checked some "filters" inside ffdshow ? like post processing, resizing ?
these could slow down encoding.
And.. btw for avi/mkv input hdc will select directshowsource as decoder, you can try forcing directshowsource2 or ffmpegsource

I did uncompressed movie only rips with DVDShrink and in that, turned off the unwanted subs.
Both the manual extracted subs and the HDC runs were done from these movie only rips.

While HDC was running I checked the hdc_subs.idx and compared it to the manual extract.
I then renamed the manual extracts to hdc_subs.XXX and replaced the sub files in the working folder with the manual extract and it actually worked.
I have had one successful run with this so far but I'll try it again tomorrow.

isn't nice to reauthor subs in ifo...
please post the hdc_subs.list and the ifo

BHH

[Acid-Burn]

#####

[buzzqw]

your analysis is very interesting

hdc will list (for selecting) all subs, wide or not

from your first code i can see you have select the 0,1,2,3,4 listed and not the 0,2,4,6,8
the number 0,1,2,3,4 is taken from subs. look in hdc sub list, after language, you have a number. I take this

please mail me directly the ifo, thanks

BHH

[Acid-Burn]

#####

[Acid-Burn]

#####

[buzzqw]

thanks for the mail

so.. hdc will list two 0 subs, two 1 subs .. and so on ?

but hdc should report in hdc.list all numbers you select.. it's vsrip that don't extract the 0 you want.. but other 0 track ...

do i understud what you mean ?

BHH

[Acid-Burn]

#####

[buzzqw]

a picture is worth a thounsand words :)

thanks

please redonwload the beta ini, and check it, :thanks:

BHH

[Acid-Burn]

#####

[buzzqw]

VSRip counts the total number of subtitle tracks and assign 1 number to each in order to keep track of them.

that's the information i need. please try the new beta ini

BHH

[Acid-Burn]

#####

[buzzqw]

here http://forum.doom9.org/showthread.php?p=1289610#post1289610

you don't need to encode, just add the work to queue and check the hdc.list

BHH

[Acid-Burn]

#####

[buzzqw]

First look, it seems perfect. Now I'll try that a couple of times :)


H:\! - Film\Aeon Flux\Movie only\VIDEO_TS\VTS_01_0.IFO
H:\HD Convert\Working\hdc_subs
1
1
0 2 4 6 8
CLOSE
RESETTIME

yea, thanks!

i will wait your test

if positive, this will be a good bug fix

BHH

[Mrsash]

HDC CAN convert from avi/mpeg1/flv... just select as decoder "Use DirectShowSource"

I tried this but did not work. I tried all in the decoder list and hitting analyze did not bring up the audio

and ... for automkv problem... post on automkv thread... (anyway on avi/mkv source you MUST specify the muxing AR in advanced settings)


This fixed up anyway after I picked --engage keep_bitstream_ar_info. Hoping this is not a bad thing?


A question. I was advised if I wanted automkv to encode at best quality and not care about the size to pick Pure constant quality mode. Does such a feature exist in HDC?

I do remember it not working correctly sometimes since I ended up with a file 1.5x the original.

In any case if it does exist in HDC has this been resolved? Just checking

Also do I understand this correctly. HDC and automkv have same capabilities but HDC is easier for us Noobs. The initial page tells us what it does but does not quite make it clear about the difference between these gui's.

thanks again

[Acid-Burn]

#####

[buzzqw]

I tried this but did not work. I tried all in the decoder list and hitting analyze did not bring up the audio

if even selecting directshowsource don't handle your file... there is a problem

please post a sample

This fixed up anyway after I picked --engage keep_bitstream_ar_info. Hoping this is not a bad thing?

good idea, since x264 signal the ar

A question. I was advised if I wanted automkv to encode at best quality and not care about the size to pick Pure constant quality mode. Does such a feature exist in HDC?
just select the 1 pass quality

I do remember it not working correctly sometimes since I ended up with a file 1.5x the original.
select the 1 pass quality , with the preset "extreme quality", and be surprised

Also do I understand this correctly. HDC and automkv have same capabilities but HDC is easier for us Noobs. The initial page tells us what it does but does not quite make it clear about the difference between these gui's.

hdc now have more features and less errors then automkv (expecially with the new full build)

HDC can do all automkv does except few very advanced avisynth manipulation , like QTrim and HGAVS

HDC has a more advanced queue support, audio and subs handling (thanks to Acid-Burn for latest bug!) , very good m2ts support... and so on

do.. get stick with HDC, Automkv is a deadhorse

No, really, thank you for this GUI but sure, this is a good bug fix and I'm only glad I could help on this small part of the GUI :)

Aeon flux is running right now. Got an error in the extract from my movie only rip, probably an problem in the new IFO, so I changed back to the complete rip and for now it seems to work perfectly. The .list does capture the subtitles I want to keep and VSRip seems to extract it perfectly into the .idx.
hdc_subs.list and hdc_subs.idx is in the attachment if you want to see it for yourself :)


H:\! - Film\Aeon Flux\VIDEO_TS\VTS_04_0.IFO
H:\HD Convert\Working\hdc_subs
1
1
0 2 6 8 10
CLOSE
RESETTIME

0=Danish
2=English
6=Norwegian
8=Finnish
10=Swedish

All widescreen versions.

Looks perfect and fixed :)

please post your result and end of encoding!

thanks again!

BHH

[flebber]

Buzzqw to do a deinterlace test am I correct in thinking the routine test 20% of the loaded file to determine whether it is interlaced?

Current encode it tested 14775/73825 frames. Would the test still be as accurate if we only used 10% for testing?

[sjchmura]

ok, thanks buzzqw...HDConverToX become better day by day
For my purpose, 720p/h264/mkv to 720p/xvid/mkv Xbox-compatible, it's already virtually perfect.
Making small changes in the file queue.bat, i can go over the few limitations, such as the different enconding of the audio tracks, or the adding external subtitles...che figata (cool)

I like HDC too much! :D

How do you have 720p/xvid/mkv working on teh xbox 360?

Why would we need to re-encode for xbox360 the video - I thought only the audio?

[buzzqw]

Buzzqw to do a deinterlace test am I correct in thinking the routine test 20% of the loaded file to determine whether it is interlaced?

Current encode it tested 14775/73825 frames. Would the test still be as accurate if we only used 10% for testing?

in next update the deinterlace test will test a wise range of frames

EDIT: hdc will propose a % to analyze (proportional to length of movie) , but user will be able to change it

thanks for pointing it out

BHH

[Acid-Burn]

#####

[buzzqw]

yup.. you are right !

fixed in next update (but don't warry... no need to interrupt your work!)

just post the success! (i hope!)

BHH

[Acid-Burn]

#####

[alpha_125]

How do you have 720p/xvid/mkv working on teh xbox 360?

Why would we need to re-encode for xbox360 the video - I thought only the audio?

never said 360


"F:\HDC\applications\xvid_encraw.exe" -progress 50 -i "F:\HDC\temp\hdconverttox[.......] -cq 2 -vbvmax 5000

OR

"F:\HDC\applications\xvid_encraw.exe" -progress 50 -i "F:\HDC\temp\hdconverttox[.......] -bitrate 4000 -single -vbvmax 5000
damn! it don't work...i have yet few peaks (16/18 mbps)...i'll study :D

[buzzqw]

that's good!

thanks again Acid-Burn

BHH

[Betsy25]

Wow, I'm so impressed by the quality and the amount of work you put into this gem buzz, time to change my custom user title.:devil:

:thanks:

[Sharc]

... Sharc.. the make report...

Here we go:

HDConvertToX v.1.7.322.2865 report

Input File: c:\users\user1\movies\there_will_be_blood_deu\video_ts\vts_05_1.vob ( C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_0.IFO )
PGC : PGC 1. Length: 2:31:59:03 / chained=1
Codec Video: mpeg
Width / Heigh : 720 / 576
Framerate / Framecount: 25.000 / 227975
Duration(hh:mm:ss): 2:32:0
Aspect Ratio: 1.7778
Resized resolution: 720 / 576
Crop Values : 8:80:8:80
Activate: Anamorphic Resize
No Resize & Crop: On

Start Video Configuration ->
Encoding Settings: X264 in MKV
Encoding Preset: 6
Final Size: 4483
Priority: idle
Denoise Level: None
Video Analyzer: Force DirectShowSource
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Copy Audio
Audio Bitrate/Quality: 128
Audio Channels: Original
MP3 Mode: abr
Normalize: On
Audio handling: Use Eac3to as demuxer
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE
*** 80: English (AC3 6ch, 0xBD 0x80) [0]
*** 81: Deutsch (AC3 6ch, 0xBD 0x81) [0]

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE
English 0 (0xBD 0x20) [0] wide
English 0 (0xBD 0x21) [0] letbox
English 1 (0xBD 0x22) [0] wide
English 1 (0xBD 0x23) [0] letbox
*** Deutsch 2 (0xBD 0x24) [0] wide
*** Deutsch 2 (0xBD 0x25) [0] letbox
Turkish 3 (0xBD 0x26) [0] wide
Turkish 3 (0xBD 0x27) [0] letbox
Deutsch 4 (0xBD 0x28) [0] wide
Deutsch 4 (0xBD 0x29) [0] letbox

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On

Start Advanced AviSynth ->
ColorMatrix: On
-> End Advanced AviSynth

Start Queue ->
"C:\programme\Video\HDConvertToX\applications\eac3to.exe" "C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_1.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_2.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_3.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_4.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_5.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_6.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_7.vob" 3: "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdencodertox-pid3.ac3"
"C:\programme\Video\HDConvertToX\applications\eac3to.exe" "C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_1.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_2.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_3.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_4.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_5.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_6.vob"+"C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_7.vob" 4: "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdencodertox-pid4.ac3"
"C:\programme\Video\HDConvertToX\applications\VSrip.exe" "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdc_subs.list"
"C:\programme\Video\HDConvertToX\applications\x264.exe" --pass 1 --bitrate 3354 --threads auto --thread-input --no-psnr --progress --ipratio 1.3 --pbratio 1.2 --keyint 48 --min-keyint 2 --bframes 3 --mixed-refs --trellis 0 --ref 1 --deblock 0,0 --subme 2 --direct auto --vbv-bufsize 14000 --vbv-maxrate 20000 --me dia --no-ssim --merange 16 --weightb --b-adapt 1 --partitions none --aud --aq-strength 1.0 --psy-rd 0.7:0.2 --sar 64:45 --output "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdconverttox_vts_05_1.h264" "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdconverttox_vts_05_1.avs"
"C:\programme\Video\HDConvertToX\applications\x264.exe" --pass 2 --bitrate 3354 --threads auto --thread-input --no-psnr --progress --ipratio 1.3 --pbratio 1.2 --keyint 48 --min-keyint 2 --bframes 3 --mixed-refs --trellis 1 --ref 3 --deblock 0,0 --subme 7 --direct auto --vbv-bufsize 14000 --vbv-maxrate 20000 --me umh --no-ssim --merange 16 --weightb --b-adapt 1 --partitions p8x8,b8x8,i4x4,i8x8 --8x8dct --aud --aq-strength 1.0 --psy-rd 0.7:0.2 --sar 64:45 --output "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdconverttox_vts_05_1.h264" "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdconverttox_vts_05_1.avs"
"C:\programme\Video\HDConvertToX\applications\Chapter\ChapterXtractor.exe" "C:\Users\user1\Movies\THERE_WILL_BE_BLOOD_DEU\VIDEO_TS\VTS_05_0.IFO" "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\chapters.txt" -p5
"C:\programme\Video\HDConvertToX\applications\mkvmerge.exe" -o "C:\Users\user1\Movies\HDConvertToX\blood.MKV" --default-duration 0:25.000fps --aspect-ratio -1:1.777778 "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdconverttox_vts_05_1.h264" --language -1:eng "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdencodertox-pid3.ac3" --language -1:deu "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdencodertox-pid4.ac3" --default-track -1:no "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdc_subs.idx" --chapters "C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\chapters.txt" --title "Done with HDConvertToX v.1.6.300.2754"
-> End Queue

AviSynth Script ->
Working with files: C:\Users\user1\Movies\HDConvertToX\HDC-WORKFOLDER\VIDEO_TS_IFO\hdconverttox_vts_05_1.avs
try {
directshowsource("c:\users\user1\movies\there_will_be_blood_deu\video_ts\vts_05_1.vob",audio=false)
last = isRGB(last) ? ConvertToYV12(last) : last
last = isYUY2(last) ? ConvertToYV12(last) : last
ColorMatrix(mode="Rec.709->Rec.601")
return last
}
catch (err) {
last=BlankClip()
converttoyv12()
subtitle(err)
trim(0,1500)
}
-> End AviSynth Script

[buzzqw]

StaxRip is a great software, my kudos to Stax

Staxrip has a very clean and clever interface, it's just do what is proposed, but with an engine able to do near anything. StaxRip is very modular.
I must admin that i never used it for "full" encoding but i used it in several tests

and.. since you know StaxRip feel free to suggest idea you would like to see on HDC too

@Sharc

directshowsource("c:\users\user1\movies\there_will_be_blood_deu\video_ts\vts_05_1.vob",audio=false)

directshowsource cannot join multiple vobs. DirectShowSource isn't to use with dvd input (or at least with more then one vob)
(well.. avisynth CAN join several video.. but this is another story)

maybe i will add a warking when input is a dvd and DSS is the preferred decoder

BHH

[Betsy25]

and.. since you know StaxRip feel free to suggest idea you would like to see on HDC too

BHH

Hi buzz, perhaps the only thing I miss in HDC (compared to staxrip) is the "clever" way of the Compressibility test, meaning :
1) You choose your desired output filesize.
2) You let it run the compressibility test.
3)) The program suggests the best resolution (resizing down) for getting a great output quality (it will also show the final estimated bitrate for this reso, + horizontal/vertical Modxx values, and the error% of the resized resolution compared to the original input resolution.

[buzzqw]

... well.. this features is somewhat already present!

just set the quality/speed slider... go in utilty and check the compression test

it will use your "quality" to make a compression test. at end it will report how big the final size will be (hdc will do a constant quality compression test)

then you can tune hdc (lowering resolution/using a "slower" profile) and make another test

on automkv i have "optimized" the routine.. and it's like staxrip

maybe i will "upgrade" the CT too in HDC

BHH

[Sharc]

@Sharc

directshowsource cannot join multiple vobs. DirectShowSource isn't to use with dvd input (or at least with more then one vob)
(well.. avisynth CAN join several video.. but this is another story)

maybe i will add a warking when input is a dvd and DSS is the preferred decoder

I see, thanks.
The problem is, I tried using DGIndex at first, however it corrected something in the .d2v index file (renaming it to .d2v.bad) and created a fixed .d2v. The x264 encoder however created a terribly looking blended picture based on the fixed d2v.

Here the fix which DGIndex applied:

D2V Fix Output

Field order transition: 0 -> 2
d00 5 0 34816 0 2 1 90 a0 a0 a0 a0 a0 a0 a0 a0 a0
d00 5 0 67584 0 3 1 d2 f2 e2 f2 f2 e2 f2 f2 e2 f2 f2 e2
corrected...
d00 5 0 34816 0 2 1 90 a0 a0 a0 a0 a0 a0 a0 a0 a1
d00 5 0 67584 0 3 1 d2 f2 e2 f2 f2 e2 f2 f2 e2 f2 f2 e2

[buzzqw]

error in field order transition usually mean bad authored movie..

you could try a dvdshrink NO compression copy
should "fix" the issue

BHH

[Sharc]

Thanks for the hint. I'll try.

Edit: No, it didn't help :(

Edit2: Hmm, I renamed the movie.d2v.bad back to movie.d2v; now everything looks fine ... :confused:
It looks as if the mess was created at the transition from the studio intro to the movie.

[Chengbin]

buzzqw

My issue has been fixed with DSS. The fps problem was my own stupidity (I forgot to change the resolution).

One thing that I noticed is that DSS is slower than eac3to! I'm hitting high 16fps with DSS, but encoding with eac3to, I'm getting 18.5fps.

One thing that I would like very much is subtitles. Is it possible to make another option, where the subtitle is extracted, but it is not muxed, but as a separate file. My Archos 5 doesn't support subtitles muxed in a container but supports it if it is as a separate file. It is a pain to use mmg's command line to extract the subtitles, and it is very time consuming. I don't get why do they have to go through the entire file for a 50KB file.

[Adub]

They have to go through the entire file because the subtitle is indexed throughout the entire movie. It's not like one little file in a folder at the very beginning of the MKV.

As for the commandline issues, have you tried MKVExtractorGUI?

[Chengbin]

They have to go through the entire file because the subtitle is indexed throughout the entire movie. It's not like one little file in a folder at the very beginning of the MKV.

As for the commandline issues, have you tried MKVExtractorGUI?

Yes.

For some reason for some files it would just not extract it. Then I have to use command line.

[buzzqw]

subtitle files is always in \temp folder.. you can get from it ... :confused:

BHH

[Mrsash]

if even selecting directshowsource don't handle your file... there is a problem
please post a sample
Where do I upload a sample?


good idea, since x264 signal the ar

I feel like a dumba$$. It worked with a sample I used for the same video which I cut with virtualdub but did not work with the movie itself(scratching head)

just select the 1 pass quality
thanks will try this

select the 1 pass quality , with the preset "extreme quality", and be surprised
Again will try


hdc now have more features and less errors then automkv (expecially with the new full build)

HDC can do all automkv does except few very advanced avisynth manipulation , like QTrim and HGAVS

HDC has a more advanced queue support, audio and subs handling (thanks to Acid-Burn for latest bug!) , very good m2ts support... and so on

do.. get stick with HDC, Automkv is a deadhorse


Will do thanks

[buzzqw]

new full package HDConvertToX 1.7.323.2869

>fixed signal dar on mkv muxing when noresize is used
>fixed --sar usage when noresize is used
>fixed change layout (thanks to SeeMoreDigital)
>fixed update manual
>fixed audio muxing on ifo input. Note: i was never able to replicate this problem. Make sure you always close PGC window with ACCEPT or REJECT IFO
>added support for saving configuration. This will override any hidden options. Please check online manual
>fixed removed support for hidden options files. Use Save Configuration and tune it
>fixed drag&drop usage when using working folder option
>fixed copy audio and mkv muxing when source is dvd
>fixed usage of colormatrix when source is AVC (no colormatrix will be used)
>fixed force using of FFmpegSource when input is DVD.
>added support for polish, hungarian, czech languages and subs
>fixed visual glitch when No Resize&Crop is checked before file analysis's
>fixed show quality with 2 pass (CRF+1pass)
>fixed some optimizations to Make Report
>added some missing tooltip
>fixed uncompatible avs script when noresize, no filters, no colormatrix is used
>fixed vsrip will extract wrong subs when multiple subs share the same index number
>fixed test interlace patter offers the possibility to change the % of analysis. HDC will set the % to a value correct for your file
>added unsupported hidden option "x264log.txt" for activating x264 encoding log. Note that this features isn't supported by official x264 build and should be used only if you manually substitute the x264.exe with one supporting this features. This option will force x264.exe to create a x264log_XXXX.txt in temporary folder. This option will be no mentioned in manual since it's totally unsupported. AKA try yourself but don't report problem.
>other minor corrections and cosmetic fixes

BHH

[Chengbin]

Is colormatrix bad for AVC or something?

[Havokdan]

You can put the changelogs in the first post or a link to all the changelogs in the first post?