AutoMKV 0.93a - (DVD/TS/AVI/AVS to X264/XviD/WVC1 into MKV/MP4/WMV) update 30/12/2007

[vasili69]

thanks buzzqw for the info and the audio forum !! (never would have found it myself).

[sti3]

Yes I am a complete noob to this program but:

I don't understand why when I open a .mkv with 5.1 ac3 sound and 720p h264 video to try to convert to lower-resolution xvid .avi "copy original" is not an option in the downmix audio box. I am using the new version, 0.85b In the audio dropdown it just have the name of the .mkv. I installed CCCP.

EDIT: So I read the above. That means that I can't copy ac3 audio from an MKV to an AVI? Trying transcoding to Nero AAC...

[kikker]

if your source file is an .avi/.mkv./.ogm/.mp4... automkv isn't able to demux audio tracks only to encode to neroa/lame/ogg...



Thanks for the update! Is the reason above not to including audio copying for non-mpeg2 sources a syncing issue? Or, is there some other unforeseen difficulty?

[jefrey]

great update:) but just one question have anyone tested the ps3 41 level on the xbox 360? and does it works fine?because sometimes when i test some short clips with high res. with that profile the movie works fine, but the sound aac dlp II run away (micky mouse voices) but if i make stereo aac or dlp I the mp4 will didnt work :(
media file not supported ;(

[kikker]

I know we talked about this a bit back in this discussion, and I'm not quite sure how this can be remedied. If I have short movie to be encoded with the ipod profile, I do realize I can enter a bitrate for the encode on the advanced page to override the file size.

However, if I do not enter a bitrate and let the file size dictate the bitrate, even the 1/4 CD is too large and a bitrate over 30,000 is fed to the encoder. Now, this violates the --vbvmaxrate 768 in the ipod profile, and the file generated indeed has a bitrate that exceeds 768. Is this a problem? Well, not for me, but this could lead to problems for others I suppose.

This makes me wonder then, even if I *were* to select a bitrate of 700 (<768), would there be short segments of the video that would exceed the --vbvmaxbitrate even over those short segments? I suppose this would be a function more of the encoder itself than the GUI.

[buzzqw]

@kikker AND @sti3

syncro is one reason.. the other is that i haven't implemended audio extraction from not mpeg2 file
(but working on it...)

@jefrey
but the sound aac dlp II run away
sorry pal.. but video profile has nothing to spare with audio profile... totally nothing
try using Nero aac or CCT aac...

@kikker
as you say on ipod profile there is <VBVMaxBitrate>768</VBVMaxBitrate> or <VBVMaxBitrate>1500</VBVMaxBitrate> for 5.5 profile
I suppose this would be a function more of the encoder itself than the GUI.

i tryed an encoding of 12sec with a file size of 100mb and ipod profile... (--bitrate 64365 )...
this is the (trimmed) report of avinaptic
Bitrate: 1521.914920 kbps

as can see seems that x264 is able to "obey" to max bitrate... (or we hope so...)

BHH

[jefrey]

i've used nero aac.

[BleedingGums]

in 0.85 when i select my .ifo file the codec selection and quality sliders reset back to defaults, despite my changing them.

[buzzqw]

@BleedingGums

quality sliders reset back to defaults
got it, fixed in next update

the codec selection

now working on it!

@jefrey

but the sound aac dlp II run away (micky mouse voices)
even if you listen the audio.mp4 on pc there is this problem ?

BHH

[vgiozo]

For those interested, this version seems to run ok in Vista...DirectShowSource fails, it is able to encode with FFMpeg though...

[TheRyuu]

How about a free and really fast mirror (IMHO):
http://files.filefront.com/AutoMKV085rar/;7720172;;/fileinfo.html

(I often hit 1mB/s+ with them)

[delacroixp]

0.85 Full Package 06/06/2007

Link on first PAGE... please use a mirror if updated.. thanks!

ADDED: In Advanced Profile Editing "Allow x264 Stats". This option is checked by default. When enabled will allow AutoMKV to diplay a graphical windows of X264 encoding status.
Will be displayed the current video frame, the size of movie, % of progress, encoding speed, time elapsed and time remaining. Is also possible to abort encoding (killing the x264.exe). This feature uses from 0% to 5% of cpu power (depends of cpu power... of course :) )
ADDED: "Allow x264 Stats" in Save Settings

:thanks: tooo much... stats rock... !!!


:):D:eek:
Pascal

[buzzqw]

thanks delacroixp!

how much cpu use the automkv.exe on your pc while displaying the stats ? (also.. what cpu you have ?)

BHH

[delacroixp]

how much cpu use the automkv.exe on your pc while displaying the stats ? (also.. what cpu you have ?)

I'm using an entry level dual-core which is slightly overclocked!
I tested with Band of Brothers 1 @ 720x576 @ 1%, 5% and 10%

The results:
With GUI: FPS = 15.61 , 12.18 , 11.11
No... GUI: FPS = 15.90 , 12.45 , 11.35

Difference in Percentage = 1.82% , 2.1% , 2.1%
Which is roughly, a 2% decrease... which will fluctuate depending on the complexity and/or resolution of the material... and of course, the power of your CPU.

1) It struck me that the Current Video Frame could use 1000's separated by a space or a comma ','
2) The video size could be expressed in MB (also using comma notation)... alternatively, KB, MB and GB as each became more appropriate...
3) Time Elapsed could be expressed in the minimum number of fields instead of 00:00:00 (eg, 6:52)... it's easier to read and understand the figure '25' compared to 025 or 0025.
In a database you might use a 3-digit number to help sort and arrange but only display the stripped-off actual number.


:):D:eek:
Pascal

[jeffy]

Hi, buzzqw,

I am sorry for bothering you, but I used the "Search this thread" (term: Yadif) button before asking.

When you select deinterlacer "Interlaced" what deinterlacer is it? Can I select my preferred one somehow? Can I use Yadif? TDeint? MCBob? Anything else? Will I see it anywhere else than in the log?

If you cannot choose do you consider this option?

Sample from the log:
LeakKernelDeint(movie,order=1,sharp=true)

Thank you for your time and have a nice weekend.
Jeffy

[buzzqw]

here the answer

http://forum.doom9.org/showthread.php?p=937978#post937978

about yadif the answer is yes ... but difficult since yadif required loadcplugin and not loadplugin

you must edit the base.avs and specify the loadplugin("c:\...\..\yadif.dll")

then in deinterlacer list write yadif(....)

BHH

EDIT: for use MCBob just write MCbob() on deinterlacer list.. ans o on

[jeffy]

here the answer

http://forum.doom9.org/showthread.php?p=937978#post937978

about yadif the answer is yes ... but difficult since yadif required loadcplugin and not loadplugin

you must edit the base.avs and specify the loadplugin("c:\...\..\yadif.dll")

then in deinterlacer list write yadif(....)

BHH

EDIT: for use MCBob just write MCbob() on deinterlacer list.. ans o on

Thank you! How did you know there was something on the page 39? :)
I will try it and report back later...

[buzzqw]

i used the search... ;)

anyway i added a link to this topic in automkv wiki ... :)

...remember the autoload fuction of filters

BHH

[weaver4]

I loaded the XviD_Constant_Quality profile and the command line at the bottom of the Advanced Tab was:

-pass2 -progress -bitrate -threads 0 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -noclosed_gop -bvhq -qmatrix "D:\Downloads\AutoMKV\AutoMKV85\profiles\XviD-profiles\matrix\Sharktooth's EQM v3LR.cqm"

This command line shows two pass and not a quantizer value of 2.5. I clicked on "use this profile" but it made no difference.

[buzzqw]

I loaded the XviD_Constant_Quality profile and the command line at the bottom of the Advanced Tab was:

-pass2 -progress -bitrate -threads 0 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -noclosed_gop -bvhq -qmatrix "D:\Downloads\AutoMKV\AutoMKV85\profiles\XviD-profiles\matrix\Sharktooth's EQM v3LR.cqm"

This command line shows two pass and not a quantizer value of 2.5. I clicked on "use this profile" but it made no difference.

you are right! but is a problem only of display
if you encode using the Constant Quality profile, AutoMKV will encode at cq 2.5 as default

thanks for the diplaye bug!

BHH

[DIEGO7-5]

Hi buzzqw!

Thanks for this great software! I have 2 issues i would like to bring in:

1. I was encoding a testclip from a DVD with burnt-in subs and activated "HG AVS Optimizer". But in the final .avs script there is no line that says something like:

VobSub("D:\TEST\subs.idx")

The line is simply missing every time. This only seems to happen with HG Avs Optimizer enabled. Didn´t try with QmTrim yet...

2. More a question. Wouldn´t it make more sense to put the autoresize routine after HG avs Optimizer or QMTrim have done their part? Maybe you get better results (better resolution) with already filtered material. MKVMagic does it that way.

Thanks for your time :-)

[buzzqw]

First of all Welcome to the Forum!

thanks for your bugs, the first one is fixed in next update

More a question. Wouldn´t it make more sense to put the autoresize routine after HG avs Optimizer or QMTrim have done their part?
QmTrim work already as this, for HG... wait a future update :)

BHH

[DIEGO7-5]

Thanks for your quick reply! Just one more thing: Is there a quality difference in filtering between QmTrim and HG AVS optimizer?

[buzzqw]

s there a quality difference in filtering between QmTrim and HG AVS optimizer?

qmtrim is based on motion vector analysis, hg avs is based on frames size

both offer very good analysis , hg avs is more stable and "secure" on this analysis while qmtrim is more efficent but prone to errors since is "very beta" (better analysis on next update)

BHH

[delacroixp]

A friend of mine bought a Sony HD video camera... it takes HD anamorphic material @ 1440x1080 onto a DAT tape cassette in mpeg format...
I encoded a clip @ Q18 with only a 20% fall in filesize...

My question is... what kind of mpeg is it ?



:):D:eek:
Pascal

[buzzqw]

post a sample ... cut with dgindex

otherwise.. don't know.. (and btw... wrong forum...)

BHH

[jefrey]

Maybe i found a bug in automkv 085 :) if i make a queue job with 4 or 5 movies. Then the ready files an the filesize rise up after each file. I have fixed the disk settings to one DVD /4300gb

Also the 1st file is exactly 4.45 gb, then the 2nd file is 4.6gb, the 3rd file rise up to 4.78gb and the 4th file is now 4.89 gb :(.
And sometimes gdindex says that there is no video stream in my ts file :(. whats wrong?

[buzzqw]

i have just tryed queueing 5 file and all come out at perfect file size (2 pass balanced X264)

Also the 1st file is exactly 4.45 gb, then the 2nd file is 4.6gb, the 3rd file rise up to 4.78gb and the 4th file is now 4.89 gb

the culprit maybe audio size... (but please the log of ALL encoding mail it at my mail ... look at licence.txt)

And sometimes gdindex says that there is no video stream in my ts file . whats wrong?

in that case is better to use ProjectX (in advanced settings), is more reliable on demux ts files

BHH

[delacroixp]

post a sample ... cut with dgindex

otherwise.. don't know.. (and btw... wrong forum...)

Sorry buzzqw... I apologize for the inconvenience...



Real-time HD Codec Engine
A Sony developed Real Time MPEG Encode/Decode system with reduced energy consumption and compact size to fit inside a personal camcorder. Provides efficient MPEG2 compression, and recording and playback of clear HD images at the same bit rate of the DV format, so that High Definition video can be recorded on the same cassettes as are used for MiniDV recording.

It seams like Sony (http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&productId=11038608&langId=-1) use a proprietary MPEG-2 Encode/Decode system to capture 1080 HD in realtime...
They say of Paris that "the more things change... the more things stay the same" (any Parisian from 200 years ago would still find Paris pretty much the same today)...

Just when you think anamorphic encoding is unnecessary with modern video techniques... it comes back sronger than ever...


:):D:eek:
Pascal

[DIEGO7-5]

Just for the ones interested:

AutoMKV and XP AntiSpy don´t get along. XP AntiSpy deactivates the Windows Scripting Host by default.

This means for AutoMKV that all .VBS Scripts for deinterlacing and so on will NOT work. Most probably your encode will fail.

This is NOT a bug in AutoMKV!!!

[buzzqw]

thanks for the news

... i will look for this software!

BHH

[DIEGO7-5]

Well buzzqw, it is right here:

http://www.xp-antispy.org

[dansus]

Hi, any idea why <delay cut cmd> is using 34GB of disc space?

Starting fixing audio delay on track number 1
01:33:11 DelayCut CMD: C:\Documents and Settings\Dan\My Documents\automkv\exe\dgindex\Delaycut.exe -auto -out "C:\Documents and Settings\Dan\Desktop\My Videos\encoding\temp\fixed1.mpa" "C:\Documents and Settings\Dan\Desktop\My Videos\encoding\temp\movie T01 DELAY -198ms.mpa"
01:33:11 Original 1 Audio Size: 186504360 bytes

thanks.

[buzzqw]

@DIEGO7-5
thanks

@dansus
it's a bug of delaycut

it is often present in when working TS files.

in that case you must specify to NOT use DelayCut...

after loading your file go in advanced settings and check "Use projectX for TS files", the "Allow use of projectx" will be un-checked

then.. retry encoding!

BHH

[tha_reaper]

hello,

first of all: nice piece of work! :thanks:
second: i have some troubles :) here i go!
1: when i pick the source as the original DVD (still need to rip), DGindex freezes after it started up, and never starts indexing. I fixed this by ripping the DVD manually or selecting the video_ts map on the DVD.

2: When i needed to rip a DVD, DVDfab would give me a 9045 error. didnt matter what i did. I fixed this by downloading DVDFab HD Decrppytper, but i need to manually confirm that it finished ripping, after which i get stuck on problem number 1, so thats not very helpfull.

3: sound... When im playing with the settings for ND AAC and CT AAC, it jumps back to stereo sound. often i dont see that and notice it after the whole encode process. pretty anoying.

4: more sound... I cant seem to get 5.1 AAC sound. When i select DPL (II) it always turn out as stereo sound, and even when i chose original it turns out about half the time as 2.0 sound while my source is 5.1. i managed to get 1 AAC 5.1 rip now, but i would like to be able to chose the bitrate, and i cant do that when im forced to chose original (and hope it turns out as 5.1 and not 2.0). Which options give me 5.1 sound from a 5.1 or DTS source? For now, im stuck with copying the original AC3 sound from my DVDs which is just big in terms of filesize.

5. When i chose set width resolution: AUTO, it skips the encode process and say its ready without encoding and merging the MKV file. Fixed this by setting it to original, but i thought you should know.

6. this is the think i have the most trouble with now: I have the original DVD9 of Afro Samurai, and i want to encode it, but when DGindex is at 100%, it gives me the folowing error: "Field order transition was detected. You may need to use Fix D2V tool to repair this stream". I have tried various settings in the advaced tab for interlacing and field order (including permitting hybrid stuff) but it keeps giving me this. When i click ok, it continues but i get the same trouble as with problem 5: it skips the encode and merge process. the deinterlacing proces continues just fine.

from the last one i can give you a log if you want, but i doubt it is very helpfull. The others i should be able to reproduce.

logfile of problem 6 (same outcome as problem 5, so maybe helpfull for that too)

11:52:24 0.84 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
11:52:24 Selected Input file: D:\DVDdoel\DVDFILES\VIDEO_TS\VTS_01_0.IFO
11:52:24 Selected Output dir: D:\rippen\temp\
11:52:24 Selected Final Name: Samu
11:52:24 Selected Container type: MKV
11:52:24 Selected Encoder: X264
11:52:24 Selected Size: 1900
11:52:24 Selected Slice: 1
11:52:24 Selected Profile: 2_Pass_Extreme_Quality.xml
11:52:24 Selected Width: Original
11:52:24 Selected Resizer: NONE
11:52:24 Selected Filters: Convolution3d (preset="animeHQ")
11:52:24 Selected Deinterlacer: AUTO
11:52:24 Selected Field Order: AUTO
11:52:24 Enabled CRF/CQ AutoRes at 18 value
11:52:24 Track Language 1: English (AC3 6ch, 0xBD 0x80) [0]
11:52:24 Audio Codec 1: Copy Original
11:52:24 Audio Quality 1: 0.70
11:52:24 Audio Channel 1:
11:52:24 Advanced Audio Settings DUMP Track 1
11:52:24 Audio Track Language: und
11:52:24 Nero Option Profiles: AUTO --- Encoding Mode: Quality
11:52:24 CCT Option Profiles: AUTO --- Channel Options: AUTO
11:52:24 Lame Settings: ABR
11:52:24 Audio Normalization: 1
11:52:24 Frequency: AUTO --- Tempo : NONE
11:52:24 Pitch: NONE --- Other Add :
11:52:24 Advanced Audio Settings DUMP Track 2
11:52:24 Audio Track Language: und
11:52:24 Nero Option Profiles: AUTO --- Encoding Mode: Quality
11:52:24 CCT Option Profiles: AUTO --- Channel Options: AUTO
11:52:24 Lame Settings: ABR
11:52:24 Audio Normalization: 1
11:52:24 Frequency: AUTO --- Tempo : NONE
11:52:24 Pitch: NONE --- Other Add :
11:52:24
11:52:25 Starting Indexing
11:52:25 Dgindex CMD: D:\rippen\AutoMKV084\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=1 -YR=2 -AIF=[D:\DVDdoel\DVDFILES\VIDEO_TS\VTS_01_1.vob] -OF=[D:\rippen\temp\movie] -exit -minimize
12:00:35 Finished indexing
12:00:35 Starting fixing audio delay on track number 1
12:00:35 DelayCut CMD: D:\rippen\AutoMKV084\exe\dgindex\Delaycut.exe -auto -out "D:\rippen\temp\fixed1.ac3" "D:\rippen\temp\movie T01 3_2ch 448Kbps DELAY 0ms.ac3"
12:00:35 Original 1 Audio Size: 442072064 bytes
12:01:52 Fixed 1' Audio Size: 442072064 bytes
12:01:52 Finished fixing audio delay
12:01:52 Renamed file fixed1.ac3 to audio.ac3
12:01:52 Encoded 1' Audio Track: 442072064 bytes
12:01:53 ForceFilm Detected: 99.900002% FILM found
12:02:13 Number of Frames: 236596
12:02:13 Framerate: 29.970030
12:02:13 Movie length in Seconds: 7895
12:02:13 Movie Width/Height: 720/480
12:02:13 DgIndex AR: 16:9
12:16:28 Processing completed. Type is determined to be film.
12:16:28 BFF: 166
12:16:28 TFF: 538
12:16:28 Order: var
12:16:28 Starting X264
12:16:29 Command Line 1' Pass X264: D:\rippen\AutoMKV084\exe\encoder\x264.exe --pass 1 --bitrate 1569 --stats "D:\rippen\temp\.stats" --ref 1 --no-b-adapt --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --filter -2,-1 --direct auto --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8,p4x4 --8x8dct --threads 2 --output NUL "D:\rippen\temp\movie.avs"
12:16:29 Command Line 2' Pass X264: D:\rippen\AutoMKV084\exe\encoder\x264.exe --pass 2 --bitrate 1569 --stats "D:\rippen\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --ref 5 --filter -2,-1 --direct auto --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8,p4x4 --8x8dct --threads 2 --output "D:\rippen\temp\movie.mp4" "D:\rippen\temp\movie.avs"
12:16:37 Finished 1' Pass X264
12:16:46 "D:\rippen\AutoMKV084\exe\matroska\mkvmerge.exe" -o "D:\rippen\temp\Samu.mkv" --track-name -1:"Samu" --aspect-ratio 1:1.000000 --chapters "D:\rippen\AutoMKV084\exe\chapters.txt" "D:\rippen\temp\movie.mp4" --language -1:und "D:\rippen\temp\audio.ac3" --title "Done with AutoMKV 0.84 http://forum.doom9.org/showthread.php?p=854221 "
12:16:46 Final Muxed size: -1 bytes
12:16:46 Encoding finished: 00:24:22 elapsed time
12:16:46 -----------------------------------------------------------------------
*romoved the script logs*
12:16:47 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

EDIT: all of this is with MKV X264 encodes

[buzzqw]

@tha_reaper

first of all Welcome to the Forum!

1: when i pick the source as the original DVD (still need to rip), DGindex freezes after it started up, and never starts indexing. I fixed this by ripping the DVD manually or selecting the video_ts map on the DVD.

that's right! DGindex cannot parse encrypted dvd. You must first rip it to your hd

2: When i needed to rip a DVD, DVDfab would give me a 9045 error. didnt matter what i did. I fixed this by downloading DVDFab HD Decrppytper, but i need to manually confirm that it finished ripping, after which i get stuck on problem number 1, so thats not very helpfull.

the bundled version of dvdfad is quite old.. i can suggest to use the latest dvdfab decrypter, use it to rip your dvd to your disk.
Then launch automkv and as input file point to video_ts.ifo, automkv will automatically switch to main movie

3: sound... When im playing with the settings for ND AAC and CT AAC, it jumps back to stereo sound. often i dont see that and notice it after the whole encode process. pretty anoying.
yep.. a better procedure will be in next update!

4: more sound... I cant seem to get 5.1 AAC sound. When i select DPL (II) it always turn out as stereo sound, and even when i chose original it turns out about half the time as 2.0 sound while my source is 5.1.

i don't know if i have understud... but DPLII is not 5.1... if you want 5.1 audio you must select ORIGINAL at Downmix option

i managed to get 1 AAC 5.1 rip now, but i would like to be able to chose the bitrate,

with CCT you can quick change bitrate... with NERO the preferred method is quality, BUT is possible to choose bitrate even with Nero
Open the advanced audio options an on Nero select CBR encoding... no more no less :) but i suggest to keep quality based encoding.

5. When i chose set width resolution: AUTO, it skips the encode process and say its ready without encoding and merging the MKV file. Fixed this by setting it to original, but i thought you should know.
11:52:24 Selected Resizer: NONE
11:52:24 Selected Width: Original
What autoresize could be done if you select Original Width... ?

6. this is the think i have the most trouble with now: I have the original DVD9 of Afro Samurai, and i want to encode it, but when DGindex is at 100%, it gives me the folowing error: "Field order transition was detected. You may need to use Fix D2V tool to repair this stream".

ok. this is a problem.. of your source file..
do this: first of all close automkv, then start manually digindex, indexes your vobs, when you got the error go in dgindex -> tools -> Fix D2V and select your d2v , then fix it

now start automkv, load yor FIXED D2v , automkv will ask for your audio files.. load it, then restart your encoding (set codec, media size...)

feel free to post any doubts :)

BHH

[tha_reaper]

that's right! DGindex cannot parse encrypted dvd. You must first rip it to your hd

Thats exactly what i did... I mean that i insert the original DVD, and chose the drive that its in using the "check DVD drive" option. When i use that and he ripped it, DGindex will freeze no matter what.
When i rip it manually and select that folder, DGindex has no trouble.


the bundled version of dvdfad is quite old.. i can suggest to use the latest dvdfab decrypter, use it to rip your dvd to your disk.
Then launch automkv and as input file point to video_ts.ifo, automkv will automatically switch to main movie

DVDfab is no longer available and you have to use DVDfab HD decrypter now. I think that its because of the interface thats a tad different that you have to press the OK button at the end of the ripping proces. Not much work, but it screws up the fully automatic process (you cant do this in a batch when you go to sleep and let it run overnight).
I like DVDdecryper much more than DVDfab, but that's my personal opinion :)

i don't know if i have understud... but DPLII is not 5.1... if you want 5.1 audio you must select ORIGINAL at Downmix option
Great, it seems you understood, but i didnt... I thought that DPL and DPLII was 5.1 surround sound. It seems i'll have to look into this.

What autoresize could be done if you select Original Width... ?

I dont think that i get the point here... I dont want to resize so i set the width to original. standard the width is set to AUTO, but if i dont change that, the encoding process totally fails. Do you mean that when i chose auto, that i have to pick a resize filter for it to work? (not that i want it to work because i always want the original size, but i think thats quite strange as a standard value)

ok. this is a problem.. of your source file..
do this: first of all close automkv, then start manually digindex, indexes your vobs, when you got the error go in dgindex -> tools -> Fix D2V and select your d2v , then fix it

now start automkv, load yor FIXED D2v , automkv will ask for your audio files.. load it, then restart your encoding (set codec, media size...)
Great! this worked a charm (i hope, he is encoding now, and everything is still fine so far...). It was a bit of a hassle because i didnt know how the hell that program worked, but actually it was pretty simple after all.
Still i think its strange that a original DVD contains such errors.
Maybe there is a way to run that fixing tool automaticly when such an error pops up?

altogether, thanks a lot for the replies, you have helped me a lot!


ps: there was a strange thing that i noticed too, not sure if it was my own fault or a program fault, but when i loaded up a DVD with some extra bonus movies on it, it only showed the main movie... I had no choice to change it to the extra's so i had to rip those manually. the same problem with a DVD with 4 20 minutes episodes on it. I could only chose one of them.
I'll check into this again and report back when the problem stays, but most likely im doing something wrong again...

[buzzqw]

When i use that and he ripped it, DGindex will freeze no matter what.

i will look at this issue :)

I like DVDdecryper much more than DVDfab, but that's my personal opinion

me too.. and the replace of dvdfab is on its way

I dont want to resize so i set the width to original
set the resize to NONE if so ... in this way even the black bars will stay in

Do you mean that when i chose auto, that i have to pick a resize filter for it to work?
yes ,for autoresize, autocrop only and any of fixed with you must specify a resizer

Maybe there is a way to run that fixing tool automaticly when such an error pops up?
already on todo list :)

but when i loaded up a DVD with some extra bonus movies on it, it only showed the main movie..
that's is wanted

for a brief introduction about ifo and pgc i will suggest to look at wiki http://automkv.wiki-site.com/index.php/Help:Contents#Step_1_-_Set_Input_File

BHH

[acrespo]

ok. this is a problem.. of your source file..
do this: first of all close automkv, then start manually digindex, indexes your vobs, when you got the error go in dgindex -> tools -> Fix D2V and select your d2v , then fix it

now start automkv, load yor FIXED D2v , automkv will ask for your audio files.. load it, then restart your encoding (set codec, media size...)

feel free to post any doubts :)

BHH

I have problems with this procedure. I am converting a episodic disk (Buffy Vampire Slayer Season 1). These DVDs have some field order problems (DGIndex message) and it's telecined, then TIVTC filter is choosen by AutoMKV. When the conversion start, TIVTC filter shows message of wrong field order too. AutoMKV can't start the conversion.
The only way I can resolve this problem is back to DGIndex 1.4.8

[gonwk]

Hi buzzqw,

THANKS for 0.85 version.

G!:thanks:

[Andreas]

MKV's great.

I’m capturing from video camera and working in Premiere 2.0 from DV tape. I have lots of material that is stalled on my HDD in DV-AVI that takes a lot of space. I’ve been using MKV to archive these files at Q18. The quality has been good enough to rework in Premiere 2.0 if necessary at a later date. The problem is that I have to recode back as Premiere 2.0 does not support MKV. My preference would be to recode back to DV-AVI of which

I’m having very little success doing so. Does anybody have any suggestions?:thanks:

[buzzqw]

you can even use AutoMKV ! ehh!

load your mkv file

go in advanced settings, in ffmpeg option select DV

click start!


@gonwk

thanks! an appreciation is always welcome :)

BHH

[Andreas]

09:11:53 0.85 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
09:11:53 Selected Input file: D:\Outgoing\George NG Kerk.mkv
09:11:53 Selected Output dir: H:\Encoding\temp\
09:11:53 Selected Final Name: George NG Kerk
09:11:53 Selected Container type: MKV
09:11:53 Selected Encoder: X264
09:11:53 Selected Size: 1 CD
09:11:53 Selected Slice: 1
09:11:53 Selected Profile: ConstantQuality-CRF.xml
09:11:53 Selected Width: Automatic
09:11:53 Selected Resizer: NONE
09:11:53 Selected Filters: RemoveGrain(mode=2)
09:11:53 Selected Deinterlacer: AUTO
09:11:53 Selected Field Order: AUTO
09:11:53 Track Language 1: George NG Kerk.mkv
09:11:53 Audio Codec 1: Lame
09:11:53 Audio Quality 1: 112
09:11:53 Audio Channel 1: Stereo
09:11:53 Advanced Audio Settings DUMP Track 1
09:11:53 Nero Option Profiles: AUTO --- Encoding Mode: Quality
09:11:53 CCT Option Profiles: AUTO --- Channel Options: AUTO
09:11:53 Lame Settings: ABR
09:11:53 Audio Normalization: 1
09:11:53 Frequency: AUTO --- Tempo : NONE
09:11:53 Pitch: NONE --- Other Add :
09:11:53 Advanced Audio Settings DUMP Track 2
09:11:53 Nero Option Profiles: AUTO --- Encoding Mode: Quality
09:11:53 CCT Option Profiles: AUTO --- Channel Options: AUTO
09:11:53 Lame Settings: ABR
09:11:53 Audio Normalization: 1
09:11:53 Frequency: AUTO --- Tempo : NONE
09:11:53 Pitch: NONE --- Other Add :
09:11:53
09:11:57 Avi engage mode not corrected, switched to DirectShowSource
09:12:00 Checking script...time.avs
09:12:11 !!!!ERROR!!!!
09:12:11 !!!!ERROR!!!! - wMultOf must be non zero.
(H:\Encoding\temp\time.avs, line 11)
09:12:11 !!!!ERROR!!!!
09:12:58 0.85 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
09:12:58 Selected Input file: D:\Outgoing\George NG Kerk.mkv
09:12:58 Selected Output dir: H:\Encoding\temp\
09:12:58 Selected Final Name: George NG Kerk
09:12:58 Selected Container type: MKV
09:12:58 Selected Encoder: X264
09:12:58 Selected Size: 1 CD
09:12:58 Selected Slice: 1
09:12:58 Selected Profile: ConstantQuality-CRF.xml
09:12:58 Selected Width: Automatic
09:12:58 Selected Resizer: NONE
09:12:58 Selected Filters: RemoveGrain(mode=2)
09:12:58 Selected Deinterlacer: AUTO
09:12:58 Selected Field Order: AUTO
09:12:58 Track Language 1: George NG Kerk.mkv
09:12:58 Audio Codec 1: Nero AAC
09:12:58 Audio Quality 1: 0.35
09:12:58 Audio Channel 1: Stereo
09:12:58 Advanced Audio Settings DUMP Track 1
09:12:58 Nero Option Profiles: AUTO --- Encoding Mode: Quality
09:12:58 CCT Option Profiles: AUTO --- Channel Options: AUTO
09:12:58 Lame Settings: ABR
09:12:58 Audio Normalization: 1
09:12:58 Frequency: AUTO --- Tempo : NONE
09:12:58 Pitch: NONE --- Other Add :
09:12:58 Advanced Audio Settings DUMP Track 2
09:12:58 Nero Option Profiles: AUTO --- Encoding Mode: Quality
09:12:58 CCT Option Profiles: AUTO --- Channel Options: AUTO
09:12:58 Lame Settings: ABR
09:12:58 Audio Normalization: 1
09:12:58 Frequency: AUTO --- Tempo : NONE
09:12:58 Pitch: NONE --- Other Add :
09:12:58
09:13:02 Avi engage mode not corrected, switched to DirectShowSource
09:13:05 Checking script...time.avs
09:13:09 !!!!ERROR!!!!
09:13:09 !!!!ERROR!!!! - wMultOf must be non zero.
(H:\Encoding\temp\time.avs, line 11)
09:13:09 !!!!ERROR!!!!
09:13:10 Script checked. All OK!!!
09:13:10 !!! BREAK - FILE NOT SUPPORTED !!! - Trying with MediaInfo!
09:13:11 Aspect ratio: 1.059
09:13:11 Number of Frames: 3059
09:13:11 Framerate: 25.000
09:13:11 Movie length in Seconds: 123
09:13:11 Movie Width/Height: 720/576
09:13:11 Number of Frames: 3059
09:13:11 Framerate: 25.000
09:13:11 Movie length in Seconds: 123
09:13:11 Movie Width/Height: 720/576
09:18:07 "H:\AutoMKV\AutoMKV085\exe\matroska\mkvmerge.exe" -o "H:\Encoding\temp\George NG Kerk.mkv" --track-name -1:"George NG Kerk" --aspect-ratio 1:1.#INF00 "H:\Encoding\temp\movie.mp4" --language -1:und "H:\Encoding\temp\" --title "Done with AutoMKV 0.85 http://forum.doom9.org/showthread.php?p=854221 "
09:18:08 Final Muxed size: -1 bytes
09:18:08 Encoding finished: 00:05:10 elapsed time
09:18:08 -----------------------------------------------------------------------
09:18:08 Script AutoCrop.log
09:18:08 -----------------------------------------------------------------------
09:18:08 Script Resmovie.avs
09:18:08 -----------------------------------------------------------------------
09:18:08 Script movie.avs
09:18:08
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\AddGrain.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\autocrop.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\aWarpSharp(Pruned).dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\blockbuster.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\cnr2.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\ColorMatrix.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\Convolution3D.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\corrector.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\DctFilter.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\Decomb.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\Deen.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\degrainmedian.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\DGDecode.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\EEDI2.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\FFT3DFilter.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\FluxSmooth.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\frfun7.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\hqdn3d.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\LeakKernelDeint.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\MaskTools.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\medianblur.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\MipSmooth.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\MSharpen.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\mt_masktools.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\mvtools.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\NicAudio.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\RemoveGrainSSE2.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\RepairSSE2.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\RSharpenSSE2.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\SangNom.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\SimpleResize.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\SoundOut.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\TBilateral.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\TDeint.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\TIVTC.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\TomsMoComp.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\TTempSmooth.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\UnDot.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\UnFilter.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\VSFilter.dll")
09:18:08 LoadPlugin("H:\AutoMKV\AutoMKV085\exe\filter\warpsharp.dll")
09:18:08 #loadpluginstart
09:18:08
09:18:08 #test1
09:18:08
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\BlindDeHalo3_mt2.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\HybridFuPP.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\LanczosPlus.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\Lem.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\LimitedSharpenFaster.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\MCBob_v03c.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\mvbob.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\seesaw.avsi")
09:18:08 Import("H:\AutoMKV\AutoMKV085\exe\filter\spresso.avsi")
09:18:08 #importstart
09:18:08
09:18:08 #test2
09:18:08
09:18:08 movie = directshowsource("D:\Outgoing\George NG Kerk.mkv",fps=25.000,convertfps=true,audio=false)
09:18:08 movie = isRGB(movie) ? ConvertToYV12(movie,interlaced=true) : movie
09:18:08 movie = isYUY2(movie) ? ConvertToYV12(movie,interlaced=true) : movie
09:18:08 function getOrder(clip c) {
09:18:08 order = GetParity(c) ? 1 : 0
09:18:08 Return order }
09:18:08 #filter1start
09:18:08
09:18:08 #test3
09:18:08
09:18:08 #resizestart
09:18:08
09:18:08 #test4
09:18:08
09:18:08 last = movie
09:18:08 #filter2start
09:18:08
09:18:08 #test5
09:18:08
09:18:08 RemoveGrain(mode=2)
09:18:08 -----------------------------------------------------------------------
09:18:08 Script mkvmaudio.avs
09:18:08 -----------------------------------------------------------------------
09:18:08 Script mkvmaudio.bat
09:18:08 -----------------------------------------------------------------------
09:18:08 Script mkvmaudio2.avs
09:18:08 -----------------------------------------------------------------------
09:18:08 Script mkvmaudio2.bat
09:18:08
09:18:08 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -


It's not working. I'm getting a MP4 output file.The extension from the DV-AVI is .avi. Any other suggestions. Maybe transcoding to HQ WMV might be a solution?

[buzzqw]

... retry with this..

load your mkv, in advanced settings set ffmpeg to dv, deinterlacer to NONE, in basic panel set resizer to none

and let start!

BHH

[tha_reaper]

hi buzzqw, im back again ;)

im still having trouble with the 5.1 AAC sound.
As well in ND as in CT AAC when i select original for a source of 6 chanel AC3 sound, it always gives me 2.0 AAC sound.
I have played with the different quality/bitrates but i just cant seem to get it right.

like here: i used prepare phase only option so i can open the audio files up with mediainfo and check their chanel numbers.

13:46:58 0.84 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
13:46:58 Selected Input file: D:\DVDdoel\DVDFILES\VTS_01_1.d2v
13:46:58 Selected Output dir: D:\rippen\temp\
13:46:58 Selected Final Name: test1
13:46:58 Selected Container type: MKV
13:46:58 Selected Encoder: X264
13:46:58 Selected Size: 1500
13:46:58 Selected Slice: 1
13:46:58 Selected Profile: 1_Pass_Fastest.xml
13:46:58 Selected Width: Original
13:46:58 Selected Resizer: NONE
13:46:58 Selected Filters: NONE
13:46:58 Selected Deinterlacer: AUTO
13:46:58 Selected Field Order: AUTO
13:46:58 Enabled CRF/CQ AutoRes at 18 value
13:46:58 Enabled Prepare Phase Only
13:46:58 Track Language 1: D:\DVDdoel\DVDFILES\VTS_01_1 T01 3_2ch 448Kbps DELAY 0ms.ac3
13:46:58 Audio Codec 1: Nero AAC
13:46:58 Audio Quality 1: 0.50
13:46:58 Audio Channel 1: Original
13:46:58 Track Language 2: D:\DVDdoel\DVDFILES\VTS_01_1 T01 3_2ch 448Kbps DELAY 0ms.ac3
13:46:58 Audio Codec 2: Coding Tech. AAC
13:46:58 Audio Quality 2: 128
13:46:58 Audio Chennel 2: Original
13:46:58 Advanced Audio Settings DUMP Track 1
13:46:58 Audio Track Language: und
13:46:58 Nero Option Profiles: AUTO --- Encoding Mode: Quality
13:46:58 CCT Option Profiles: AUTO --- Channel Options: AUTO
13:46:58 Lame Settings: ABR
13:46:58 Audio Normalization: 1
13:46:58 Frequency: AUTO --- Tempo : NONE
13:46:58 Pitch: NONE --- Other Add :
13:46:58 Advanced Audio Settings DUMP Track 2
13:46:58 Audio Track Language: und
13:46:58 Nero Option Profiles: AUTO --- Encoding Mode: Quality
13:46:58 CCT Option Profiles: AUTO --- Channel Options: AUTO
13:46:58 Lame Settings: ABR
13:46:58 Audio Normalization: 1
13:46:58 Frequency: AUTO --- Tempo : NONE
13:46:58 Pitch: NONE --- Other Add :
13:46:58

I ended up with 2, 2 chanel streams.

any ideas what im doing wrong? i must be missing something, but because it worked out once (didnt use it eventually because the AAC sound would be bigger then the AC3 stream...) i just dont get it.

[buzzqw]

maybe is related to your audio decoder..

try using avinaptic on final mkv file... and look at audio section


BHH

EDIT: a stereo encoding..and look at file size of audio.mp4.. is less then audio.mp4 done with "original" ?

[Andreas]

... retry with this..

load your mkv, in advanced settings set ffmpeg to dv, deinterlacer to NONE, in basic panel set resizer to none

and let start!

BHH
It works!

Once AutoMKV’s finished one then has to open (MP4) with Quick Time then export as AVI and select profile (AVI-PAL). Quality drops by 5-10% from MKV (Q18) file to AVI-PAL though… not sure why I’m loosing quality and would appreciate any help on this. Hopefully it’s something small.

AutoMKV drops my raw footage(DV-AVI) by 80% in file size without a noticeable drop in quality. I can now archive with DVD’s instead of HDD’s!! This is a much welcomed product for a video editor like myself.

Thanks for the prompt reply and a fantastic product.

[tha_reaper]

maybe is related to your audio decoder..

try using avinaptic on final mkv file... and look at audio section


BHH

EDIT: a stereo encoding..and look at file size of audio.mp4.. is less then audio.mp4 done with "original" ?

audio.mp4 is around 1/4th to 1/3th of the AC3 sound file.
Avinaptic gives me the same results as mediainfo: 2 channel sound.
what do you mean with "a stereo encoding..and look at file size of audio.mp4.. is less then audio.mp4 done with "original" ?"?
should i do a stereo encoding now and compare the file size to the wannabe 5.1 encode?

[buzzqw]

@Andreas

:) :goodpost:

@tha_reaper
should i do a stereo encoding now and compare the file size to the wannabe 5.1 encode?

yes

and also post your mkv,audio.avs , thanks!

BHH

[tha_reaper]

I just did the prepare phase, and here are is all the info that ive got:

Logfile:
15:46:35 0.84 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
15:46:35 Selected Input file: D:\DVDdoel\DVDFILES\VTS_01_1.d2v
15:46:35 Selected Output dir: D:\rippen\temp\
15:46:35 Selected Final Name: VTS_01_1
15:46:35 Selected Container type: MKV
15:46:35 Selected Encoder: X264
15:46:35 Selected Size: 1500
15:46:35 Selected Slice: 1
15:46:35 Selected Profile: 2_Pass_Extreme_Quality.xml
15:46:35 Selected Width: Original
15:46:35 Selected Resizer: NONE
15:46:35 Selected Filters: MipSmooth(preset = "AnimeHQ")
15:46:35 Selected Deinterlacer: AUTO
15:46:35 Selected Field Order: AUTO
15:46:35 Enabled CRF/CQ AutoRes at 18 value
15:46:35 Enabled Prepare Phase Only
15:46:35 Track Language 1: D:\DVDdoel\DVDFILES\VTS_01_1 T01 3_2ch 448Kbps DELAY 0ms.ac3
15:46:35 Audio Codec 1: Nero AAC
15:46:35 Audio Quality 1: 0.50
15:46:35 Audio Channel 1: Original
15:46:35 Track Language 2: D:\DVDdoel\DVDFILES\VTS_01_1 T01 3_2ch 448Kbps DELAY 0ms.ac3
15:46:35 Audio Codec 2: Nero AAC
15:46:35 Audio Quality 2: 0.50
15:46:35 Audio Chennel 2: Stereo
15:46:35 Advanced Audio Settings DUMP Track 1
15:46:35 Audio Track Language: und
15:46:35 Nero Option Profiles: AUTO --- Encoding Mode: Quality
15:46:35 CCT Option Profiles: AUTO --- Channel Options: AUTO
15:46:35 Lame Settings: ABR
15:46:35 Audio Normalization: 1
15:46:35 Frequency: AUTO --- Tempo : NONE
15:46:35 Pitch: NONE --- Other Add :
15:46:35 Advanced Audio Settings DUMP Track 2
15:46:35 Audio Track Language: und
15:46:35 Nero Option Profiles: AUTO --- Encoding Mode: Quality
15:46:35 CCT Option Profiles: AUTO --- Channel Options: AUTO
15:46:35 Lame Settings: ABR
15:46:35 Audio Normalization: 1
15:46:35 Frequency: AUTO --- Tempo : NONE
15:46:35 Pitch: NONE --- Other Add :
15:46:35
15:46:35 DelayCut CMD: D:\rippen\AutoMKV084\exe\dgindex\Delaycut.exe -auto -out "D:\rippen\temp\fixed1.ac3" "D:\DVDdoel\DVDFILES\VTS_01_1 T01 3_2ch 448Kbps DELAY 0ms.ac3"
15:47:12 DelayCut CMD: D:\rippen\AutoMKV084\exe\dgindex\Delaycut.exe -auto -out "D:\rippen\temp\fixed2.ac3" "D:\DVDdoel\DVDFILES\VTS_01_1 T01 3_2ch 448Kbps DELAY 0ms.ac3"
15:47:47 Encoding D:\rippen\temp\fixed1.ac3 to NeroAAC with 0.50 quality
16:02:12 Encoded 1' Audio Track: 161361813 bytes
16:02:12 Encoding D:\rippen\temp\fixed1.ac3 to NeroAAC with 0.50 quality
16:15:16 Encoded 2' Audio Track: 161361813 bytes
16:15:22 Number of Frames: 236597
16:15:22 Framerate: 29.970030
16:15:22 Movie length in Seconds: 7895
16:15:22 Movie Width/Height: 720/480
16:15:22 DgIndex AR: 16:9
16:22:50 Processing completed. Type is determined to be film.
16:22:50 BFF: 108
16:22:50 TFF: 386
16:22:51 NOT Allow Hybrid Order/Pattern, set order to: TFF
16:22:51 Starting X264
16:22:51 Command Line 1' Pass X264: D:\rippen\AutoMKV084\exe\encoder\x264.exe --pass 1 --bitrate 1265 --stats "D:\rippen\temp\.stats" --ref 1 --no-b-adapt --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --filter -2,-1 --direct auto --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8,p4x4 --8x8dct --threads 2 --output NUL "D:\rippen\temp\movie.avs"
16:22:51 Command Line 2' Pass X264: D:\rippen\AutoMKV084\exe\encoder\x264.exe --pass 2 --bitrate 1265 --stats "D:\rippen\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --ref 5 --filter -2,-1 --direct auto --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8,p4x4 --8x8dct --threads 2 --output "D:\rippen\temp\movie.mp4" "D:\rippen\temp\movie.avs"
16:22:57 "D:\rippen\AutoMKV084\exe\matroska\mkvmerge.exe" -o "D:\rippen\temp\VTS_01_1.mkv" --track-name -1:"VTS_01_1" --aspect-ratio 1:1.000000 "D:\rippen\temp\movie.mp4" --language -1:und "D:\rippen\temp\audio.mp4" --language -1:und "D:\rippen\temp\audio2.mp4" --title "Done with AutoMKV 0.84 http://forum.doom9.org/showthread.php?p=854221 "
16:22:57 Encoding finished: 00:36:22 elapsed time
16:22:57 -----------------------------------------------------------------------
16:22:57 Script AutoCrop.log
16:22:57
16:22:57 Crop(10,0,700,480)
16:22:57 -----------------------------------------------------------------------
16:22:57 Script Resmovie.avs
16:22:57 -----------------------------------------------------------------------
16:22:57 Script movie.avs
16:22:57
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\AddGrain.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\autocrop.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\aWarpSharp.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\blockbuster.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\cnr2.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\ColorMatrix.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\Convolution3D.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\corrector.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\DctFilter.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\Decomb.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\Deen.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\degrainmedian.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\DGDecode.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\EEDI2.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\fft3dfilter.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\FluxSmooth.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\frfun7.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\hqdn3d.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\LeakKernelDeint.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\MaskTools.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\medianblur.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\MipSmooth.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\MSharpen.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\mt_masktools.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\mvtools.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\NicAudio.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\RemoveGrainS.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\RepairS.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\SangNom.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\SimpleResize.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\SoundOut.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\TBilateral.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\TDeint.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\TIVTC.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\TomsMoComp.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\TTempSmooth.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\UnDot.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\UnFilter.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\VSFilter.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\warpsharp.dll")
16:22:57 #loadpluginstart
16:22:57
16:22:57 #test1
16:22:57
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\HybridFuPP.avsi")
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\LanczosPlus.avsi")
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\Lem.avsi")
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\LimitedSharpenFaster.avsi")
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\MCBob_v03c.avsi")
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\mvbob.avsi")
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\seesaw.avsi")
16:22:57 Import("D:\rippen\AutoMKV084\exe\filter\spresso.avsi")
16:22:57 #importstart
16:22:57
16:22:57 #test2
16:22:57
16:22:57 movie = mpeg2source("D:\DVDdoel\DVDFILES\VTS_01_1.d2v",info=3)
16:22:57 function getOrder(clip c) {
16:22:57 order = GetParity(c) ? 1 : 0
16:22:57 Return order }
16:22:57 #filter1start
16:22:57
16:22:57 #test3
16:22:57
16:22:57 movie = tfm(movie,d2v="D:\rippen\temp\movie.d2v").tdecimate()
16:22:57 #resizestart
16:22:57
16:22:57 #test4
16:22:57
16:22:57 last = movie
16:22:57 #filter2start
16:22:57
16:22:57 #test5
16:22:57
16:22:57 MipSmooth(preset = "AnimeHQ")
16:22:57 -----------------------------------------------------------------------
16:22:57 Script mkvmaudio.avs
16:22:57
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\NicAudio.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\SoundOut.dll")
16:22:57 DirectShowSource("D:\rippen\temp\fixed1.ac3")
16:22:57 #Applying ORIGINAL downmixing routines
16:22:57
16:22:57 Normalize()
16:22:57 Soundout(output="cmd",type=1,format=3,autoclose=true,executable="D:\rippen\AutoMKV084\exe\besweet\neroaacenc.exe",prefilename=" -ignorelength -q 0.50 -if - -of audio.mp4",postfilename="",nofilename=true,showoutput=false)
16:22:57 -----------------------------------------------------------------------
16:22:57 Script mkvmaudio.bat
16:22:57
16:22:57 "D:\rippen\AutoMKV084\exe\BeSweet\vdub.exe" /x "D:\rippen\temp\mkvmaudio.avs"
16:22:57 -----------------------------------------------------------------------
16:22:57 Script mkvmaudio2.avs
16:22:57
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\NicAudio.dll")
16:22:57 LoadPlugin("D:\rippen\AutoMKV084\exe\filter\SoundOut.dll")
16:22:57 DirectShowSource("D:\rippen\temp\fixed1.ac3")
16:22:57 #Applying STEREO downmixing routines
16:22:57 function stereo(clip a)
16:22:57 {
16:22:57 flr = GetChannel(a, 1, 2)
16:22:57 fcc = GetChannel(a, 3)
16:22:57 lfe = GetChannel(a, 4)
16:22:57 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
16:22:57 mix = MergeChannels(lfc, lfc)
16:22:57 lrc = MixAudio(flr, mix, 0.2929, 1.0)
16:22:57 blr = GetChannel(a, 5, 6)
16:22:57 Return MixAudio(lrc, blr, 1.0, 0.2929)
16:22:57 }
16:22:57 #
16:22:57 6==Audiochannels() ? stereo() : last
16:22:57 Normalize()
16:22:57 Soundout(output="cmd",type=1,format=3,autoclose=true,executable="D:\rippen\AutoMKV084\exe\besweet\neroaacenc.exe",prefilename=" -ignorelength -q 0.50 -if - -of audio2.mp4",postfilename="",nofilename=true,showoutput=false)
16:22:57 -----------------------------------------------------------------------
16:22:57 Script mkvmaudio2.bat
16:22:57
16:22:57 "D:\rippen\AutoMKV084\exe\BeSweet\vdub.exe" /x "D:\rippen\temp\mkvmaudio2.avs"
16:22:57
16:22:57 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -
as you can see here, i chose for 1 file original and for the second track i chose stereo. They end up being exactly the same.

Mediainfo on the AC3 file:
Algemeen #0
Complete name : D:\rippen\temp\fixed1.ac3
Format : AC3
Format/Info : Audio Coding 3
File size : 422 MiB
PlayTime : 2h 11mn
Bit rate : 448 Kbps

Audio #0
Codec : AC3
Bitrate : 448 Kbps
Bitrate-modus : CBR
Kanaal(en) : 6 kanalen
Samplerate : 48 KHz
ChannelPositions : Front: L C R, Rear: L R, Subwoofer

Mediainfo on the wannebe 5.1 AAC:
Algemeen #0
Volledige naam : D:\rippen\temp\audio.mp4
Formaat : MPEG-4
Formaat/Info : ISO 14496-1 version 2
Formaat/Family : MPEG-4
Bestandsgrootte : 154 MiB
Speeltijd : 2h 9mn
Bitrate : 166 Kbps
StreamSize : 1.44 MiB
Datum codering : UTC 2007-06-14 13:47:55
Tagdatum : UTC 2007-06-14 14:02:06
Gebruikt programma : Nero AAC codec / Feb 12 2007

Audio #0
Codec : AAC LC
Codec/Info : AAC Low Complexity
PlayTime : 2h 11mn
Bit rate : 162 Kbps
Bit rate mode : VBR
Channel(s) : 2 kanalen
Sampling rate : 48 KHz
Resolution : 16 bits
StreamSize : 152 MiB
Encoded date : UTC 2007-06-14 13:47:55
Tagged date : UTC 2007-06-14 14:02:06

Hoofdstukken #0
1 : 00:00:00.054 -

Mediainfo on the stereo encode:
Algemeen #0
Volledige naam : D:\rippen\temp\audio2.mp4
Formaat : MPEG-4
Formaat/Info : ISO 14496-1 version 2
Formaat/Family : MPEG-4
Bestandsgrootte : 154 MiB
Speeltijd : 2h 9mn
Bitrate : 166 Kbps
StreamSize : 1.44 MiB
Datum codering : UTC 2007-06-14 14:02:15
Tagdatum : UTC 2007-06-14 14:15:10
Gebruikt programma : Nero AAC codec / Feb 12 2007

Audio #0
Codec : AAC LC
Codec/Info : AAC Low Complexity
PlayTime : 2h 11mn
Bit rate : 162 Kbps
Bit rate mode : VBR
Channel(s) : 2 kanalen
Sampling rate : 48 KHz
Resolution : 16 bits
StreamSize : 152 MiB
Encoded date : UTC 2007-06-14 14:02:15
Tagged date : UTC 2007-06-14 14:15:10

Hoofdstukken #0
1 : 00:00:00.054 -

sorry for the half english/half dutch. seems like a little bug in mediainfo upon refreshing.

It seemed unnescesary to me to do the whole encode because he will just use this files and it would only cost me another 2 hours :)

EDIT: if you think you need more info that i can best give using mail or MSN... you can mail me or add me to MSN on richarddemmers at gmail dot com
If we give the final solution here, that it should be fine...