AutoMKV 0.93a - (DVD/TS/AVI/AVS to X264/XviD/WVC1 into MKV/MP4/WMV) update 30/12/2007

[Huerta]

I keep getting this error when I try to encode something in Xvid.

"The application failed to initialize properly (0xc0150002). Click on OK to terminate the application."

Heres the pic of the error - http://i80.photobucket.com/albums/j190/b3rwyn/ddddddfasdfsaf.jpg

I have the Microsoft .NET Framework 1.1 installed. And the latest version of AVISynth but it's not working.

This also happens with MeGUI's xvid_encraw.exe.

Does anyone know how to fix it.

[buzzqw]

try updating the xvid_encraw build http://members.optusnet.com.au/squid_80/xvid_encraw.zip

also, what are your pc specs ? (cpu,ram, S.O.)
i suppose is AMD ~ 1800XP (or this family) ?

BHH

[Barleyman]

ok... you are doing a CQ encoding... well.. since is a CQ you are not use the Autoresize... and since not using autoresize the automatrix will trigger the base matrix...

automatrix will switch matrix based on autoresize, on cq encoding is impossible to set correctly...

Well all right. Matrixes, filters and profiles would probably be a good starting point for the documentation project. I have pretty vague ideas of what the matrixes do at all. Filters I'm more familiar with.

At least for the filters there was SOME documentation in earlier versions (dropped now?), for matrixes there is none AFAIK..

[Barleyman]

Speaking of filters in fact.. What would be good combination for dealing with those series that have noise added for extra "documentary"-feeling? You know, SHIELD, band of brothers, Oz ..

They tend to make something like 33-50% bigger file as I suspect the xvid encoding struggles with the "artistic" noise.

[buzzqw]

the key is GRAIN, try with degrainmedian
after the first encoding with default value start tuning the value.

another approach could be tryed with the deen or fluxsmooth

BHH

P.S. and at half of manual.. i hope if few day to complete (again isn't a full tutorial just an introduction)

[Huerta]

I updated it and still get the error.

My computer specs.

Dell Dimension 2400 Desktop (Got it with my Ford Focus)
MS Windows XP SP2
Intel Pentium 4 CPU 2.80GHz
256MB Ram
Intel 82845G/GL/GE/PE/GV Graphics Controller
70.9 GB Hardrive with 18 gigs of Free Space

If you need to know more just tell me.

[Barleyman]

Okay, I found a problem :sly:

South park again. Looks like .75 can recognize OK now it's interlaced. However I do get visible flickering deinterlace artifacts here and there.

Plus for some reason the encoding is slooooooooow.. 96 min to encode 22min cartoon on Athlon X64@2500MHz? I get whopping 6.5fps from xvid. Usually on this rig it's around 25..

Here's the logfile (http://personal.inet.fi/koti/ohramies/2007/Törkytorstai So .0.mpg.log)

If you want a cut of the mpg-file, how big it should be?

[buzzqw]

i am unable to download the file

got a message
Valitettavasti hakemaasi sivua ei löydy.

Tarkista osoitteen oikeinkirjoitus.

Copyright TeliaSonera 2005.
Sonera on TeliaSonera Finland Oyj:n rekisteröimä tavaramerkki.

:confused:

BHH

[Barleyman]

Hrmph. Tricky spaces and accented chars.
Try this: http://personal.inet.fi/koti/ohramies/2007/T%F6rkytorstai%20So%20.0.mpg.log

[buzzqw]

here the manual !!!

http://www.wikihost.org/wikis/automkv/programm/gebo.prg?name=start

i have no idea how to handle a wiki, i need some serius adimistrator :help: :help: :scared:

BHH

EDIT: @Barleyman
look here
22:22:27 Processing completed. Type is determined to be interlaced.
22:22:27 BFF: 42
22:22:27 TFF: 153
22:22:27 Order: var

the main problem is the 22:22:27 Order: var
in this case since the order isn't sure (var=variable) automkv will switch to an high quality deint procedure. And so is slow.

try forcing Interlaced TFF

[daftperception]

Hi I've been lurking around this post trying to make automkv into my default zune converter but I have two problems trust me I have searched. When I convert any surround sound movie it seems like it’s just picking any two channels and throwing them in there instead of turning them into stereo. Another problem is when I start encoding sometimes it fails to get the duration also the queue process is tedious and doesn't work for me atleast. Thanks for this tool your doing a great job.

edit:thanks

[buzzqw]

when encoding to zune and audio is multichannel choose STEREO downmixing, not original. In this way the audio will be properly downmixed

Another problem is when I start encoding sometimes it fails to get the duration

this is due to wmencoder... not to automkv, please install ffdshow (one way to determine video lenght is also looking at audio lenght :) )

queue process is tedious and doesn't work for me atleast
tedius ? i must admit the queue fuctions isn't my preferred code.. but.. tedius ?

BHH

[Huerta]

So can anyone help me with my problem.

[buzzqw]

@Huerta

download this http://tirnanog.fate.jp/mirror/XviD/xvid_encraw.7z

uncompress into \exe\encoder

the retry encoding utilizing only CQ encoding or SAP or Slow profiles.

for full compatibility with celtic_druid build open the xvid xml profiles and find <altpass2> and change to <altpass2>false</altpass2>

BUT not use CQ encoding AND HIT MEDIA SIZE (is ok to select CQ and Unlimited size)

sorry... i will ping squid_80...

BHH

[glynor]

This may be an incredibly stupid question, but in the Audio Track selection panes, there are three choices under the "Number of Channels combo box" that I'm not 100% clear on...

- Original
- DLP
- DLP II

I'm assuming that original copies over the original number of and encoding of the channels. However, if I have "Copy Original" selected as my chosen "codec", is it still necessary to choose "original" for the number of channels? If not, it would perhaps be better to grey out the combo box when Copy Original is selected (and if so, make it automatic when you choose Copy Original as the codec), and the same goes for the Quality slider (which is obviously ignored). Likewise, what happens if you choose "Original" as the "channel selection" and you have the codec set to LAME or NeroAAC?

DLP and DLP II. Is this Dolby Pro Logic 1/2? I assume it is, but since it's DLP not DPL, I'm a bit ambiguous. This could be a language translation thing (I know English cares a lot more about word position than many other languages), but in acronyms it's pretty important. Assuming it is, I also have a question about how it works... I assume if I select a 6-channel AC3 track as my input source and chose DLP II and NeroAAC as the codec then it will encode the "surround sound" data using the Pro Logic method. What are the limitations of this though? Does it work with all the codecs you can choose (LAME/WMV/OGG/etc)?

Is there any good place where I can go to look up additional info on this stuff?

[buzzqw]

if you select Copy Original there is no need to select any downmixing routines, since will be completely ignored.

DLP and DLP II
yes, is Dolby Pro Logic I and II , and yes, is a TYPO

all audio within automkv could accept dpl 1/2 since is the DECODER to expand/reconstruct the channels

i can suggest a search on hydrogenaudio or here in the audio forum.

BHH

P.S. as you know my language isn't english, even more i have learnd english most on IT books and by studing/playing RolePlayingGames... so more then mistake are to happen :)

[gekan]

the link to the manual on the first page is wrong. The link at the 1060th message is the correct one. :)

Thanks for the manual!

[Barleyman]

i have no idea how to handle a wiki, i need some serius adimistrator :help: :help: :scared:


Don't Panic!

No, I have no idea how to use wiki either but I'm usually pretty good with things you can do while having a beer..

It took me a minute to figure out where their help-page (well, wiki) is, http://wiki.wikihost.org/

Got to say at least the editor is pretty hostile. Can't upload images, make links..

[Barleyman]

I looked around a bit, looks like wikihost is not a very good choice compared with some others.. http://en.wikibooks.org/wiki/Wiki_Science:How_to_start_a_Wiki
http://en.wikipedia.org/wiki/Comparison_of_wiki_farms

There are some free ones with decent editor etc. Wikihost was just 1st one in google! Definitely their software is a mess compared to something like that: http://www.wetpaint.com/

(I think that one may be "bit" over the top for modest manual project. Good for making tv-series homepage, thought :rolleyes:)

[Barleyman]

I think it may be best to use the most common one, that is mediawiki. Wikipedia uses it and there's plenty of documentation for it: http://meta.wikimedia.org/wiki/Help:Contents http://en.wikipedia.org/wiki/Help:Contents/Editing_Wikipedia

One place that offers free hosting is http://www.wiki-site.com/

I'm bit sceptical about this "free hosting" as such, so at least with mediawiki your doc backup will work on other sites..

[buzzqw]

thanks again Barleyman

set-up a new wiki

http://automkv.wiki-site.com/index.php/Main_Page

BHH

[glynor]

There's a couple of things I've noticed with a recent DVD recode (episodes of Lost) I've been working on...

1. AutoMKV doesn't let me select my Daemon Tools provided virtual drive as the source drive. It just isn't in the drop down list at all, as if it thinks it's a hard drive.

2. My souce IFOs have a single 6 channel AC3 audio track. I'd like to include this track (as "original") in the MKV files I'm creating, and include a second track of the same audio track compressed to stereo AAC (for computers not set up for 5.1 channel sound or not set up to decode AC3). This doesn't work though. The second audio encode fails (giving the -1 size and the error message).

3. I'm having trouble with the video encoding as well, but I haven't had time to fully investigate this. I have had a number of my test encodes fail on my rip (ripped using DVD Decrypter in IFO mode to rip each episode individually) with the -1 final size. I'm using x264 and MKV, Highprofile, and no matrix. The encode works when using x264, Highprofile, and MP4 with simple audio, but I've been having it fail with the AC3 audio. Like I said, I haven't fully investigated this (since the encode process takes so long).

When I get home from work this evening (I'm in the US) I'll post some logs and look at #3 a bit more...

[glynor]

if you select Copy Original there is no
yes, is Dolby Pro Logic I and II , and yes, is a TYPO

P.S. as you know my language isn't english, even more i have learnd english most on IT books and by studing/playing RolePlayingGames... so more then mistake are to happen :)

I understand completely. I suspected that it was just a typo, but since I am by-no-means an audio engineer I figured it could also be some other newfangled thing I wasn't aware of!

And, frankly, your English is quite good, considering! Way better than my Italian!


i can suggest a search on hydrogenaudio or here in the audio forum.

Shoulda known better than to ask! I'll just have to get off my lazy ass and look that stuff up someday... :p

[Shark_jlc]

I've gone a little nuts on the wiki page. Hopefully it helps get people started cleaning it up a bit.

Edit: Ok, I'm done editing for the day. Have fun with it!

[whiskey]

Just wondering... whats the max file size support ? Since I tried today re-encode AVI 3.90 GB to MKV 1 DVDR and soon after I hit the start button message pops out BREAK - FILE NOT SUPPORTED..., also box with media settings "Size vs. Unlimited" likes to pop again randomly while changing other settings in program.

[buzzqw]

1. AutoMKV doesn't let me select my Daemon Tools provided virtual drive as the source drive. It just isn't in the drop down list at all, as if it thinks it's a hard drive.

what drive letter is ?
do you mean the check dvd drive button ?

about 2': got it... i must look.. but wouldn't be easy

about 3': a log of failed encoding would be useful


@Shark_jlc
:thanks: !!! you have done an excellent work !!!

one more help (when you have time) on left panel "Navigation" is possible to add "Filter" and "Profiles" i (and i hope more and more people) would like to add some tips and hints how to use and understand

a big thanks again !
P.S. if you need some administrator password for the wiki, tell me !

@whiskey
whats the max file size support
virtually unlimited, depends on avisynth processes like avisource or directshowsource

BREAK - FILE NOT SUPPORTED.
this mean that neither avisource or directshowsource are able to handle the file.

Are you able to play this file in media player classic ? or can you open thise file in virtualdub ?

also box with media settings "Size vs. Unlimited" likes to pop again randomly
isn't randomly, it change only when switching form crf/cq profile to non quality profiles

BHH

[Surlyrich]

I have started using automkv to convert my HDTV rips, and I must say this is a great little program. I am converting to x264 using videoredo to edit out commercials first. One problem I have run into however, is that most of my HDTV caps are in 50fps. I have not been able to find any option in automkv to change this to say 25fps. I am guessing this can be added in the command line window somehow, just not sure how to do it... Any feedback would be appreciated.

[Shark_jlc]

Buzzqw, your welcome for the edits :) Thank you for Automkv, its the first tool I've used to successfully create a good wmv file.

In regards to the wiki, I shouldn't need admin rights to do anything, so we are good there.

To clarify a request, the Navigation menu on the left is a very generic thing for wiki's. I generally do NOT see links to pages there. Instead there is a main page, that you get to, and the pages branch out from there.

As a matter of fact I'm not sure if you should really have the "help" link in the navigation go to the AutoMKV page.

I have created a blank filters page and a blank profiles page, and added links from the general help page to these pages.

I'll dig around a little more and see what else I can do.

Edit: I've made a redirect so going to profile or profiles goes to the same page, same goes for filter and filters.

[gonwk]

Hi Buzzqw,

I was all excited when I found "AutoMKV 0.74" to be used instead of AutoGK ... since YOUR program contains all software needed within it's OWN folder and it does not poll different folders AND can be installed without being in "Administrator" mode.

Here is my problem ... I was doing a Short MPEG1 clip (test clip) conversion from mpeg1 to AVI ... and I tried AutoMKV 0.74C, D, and E ... and they all flunked with the following messages ...

1) Audio Not Encoded Correctly. I said ignore ... then
2) AviMUX_GUI crashes and I see Microsoft Report Crash message.

Also, What is the DEAL with AutoMKV 0.74E when I launch it I get a Pop-up window saying "CRF" and "Hit Media Size" or "Unlimited" ... what is th edeal with this ... then blocks me from changing Container form MKV to AVI?

Could you shed any light on this?

Also, is there a "Printer-Friendly" or "PDF" Help File or Guide?

THANKS!
G!

[dlflannery]

Hi Buzzqw,
.........
Here is my problem ... I was doing a Short MPEG1 clip (test clip) conversion from mpeg1 to AVI ... and I tried AutoMKV 0.74C, D, and E ... and they all flunked with the following messages ...

1) Audio Not Encoded Correctly. I said ignore ... then
2) AviMUX_GUI crashes and I see Microsoft Report Crash message.
.............

Is your source audio monaural? I got that message when a source had mono audio, when doing a Zune WMV encoding. Buzzqw quickly added a mono selection to the WMV audio track setup and that fixed it. Have you tried pulling down the audio selection menu item that probably now says "Stereo"?

If you don't have mediaInfo (http://www.videohelp.com/tools?tool=MediaInfo), I recommend it. It will quickly tell you the info on your videos. It integrates with Explorer so you can right click to run it on the selected file.

[buzzqw]

@Surlyrich

on deinterlacer box WRITE changefps(25.00) (overwriting AUTO)

@Shark_jlc

thanks again !

i added link for audio troubleshooting...

@gonwk

the hints of dlflannery are correct (even if you are encoding to avi). AutoMKV don't know of many audiochannels has source files.
Try selecting on Downmixing "Mono"

@dlflannery

very good hint ! (feel free to add to wiki... :D)

BHH

[Barleyman]

I edited the front page.. Feel free to change the feature list in case there's nonsense there :D

[buzzqw]

@Barleyman

very good job ! i added some link and tweaked a little

thanks !

BHH

P.S. noboby have reported problem with audio encoding that NOT MORE POP-UP since i use vbs... i will include even deinterlacer and movielenght to no pop-up series... in next update

[vgiozo]

First of all, I would like to congratulate buzzqw for his excellent work and the very good program his has offered the community...

I am very glad to have come across this...

I just started using the program and as a total newbie, I am particularly drawn by ease of use, feature integration and performance...

AutoMkv does very well, but there are some things that could make it great.
So, following my compliments I would like to mention some extra features that could be integrated in the program and make it - to my mind - the best one around...

1) it would be great if one could set the desired video bitrate and immediately see a size calculation...if it could, depended on bitrate / file size, yield a recommended resolution or the resolution calculated to be used, it would be even better.

2) A preview of the (auto)cropped movie and the ability to make on the fly adjustments. This could rarely be an issue, but the autocrop selection might not be always perfect (my experience is not AutoMkv based)

These are the features i would consider great to see in the future...

Also, I'm not sure if I've come across a couple of bugs or I did something wrong...

a) When I select "don't care about size", the x264 encoding profile defaults to CQ_ASP_Q2_eq(crf).xml and I cannot change it.
(the default profile in AutoMkv 0.75 is Encoding-Mainprofile...same thing happens)

b) I am more used selecting bitrate of audio encoding rather than quality and when I click the "three exclamation mark" button and select a -BR, or -CBR encoding mode for Nero Digital in advanced settings, it does not change, it reverts immediately back to "quality" mode, or it never changes at all.
In fact any change made there is immediately reverted, like eg normalize audio.
(same goes with the newer 0.75 version posted above)

Hope i have not bored you...a million thanks once more for your work,
Cheers.

[buzzqw]

about point A fixed in next update, thanks for the bug !

it reverts immediately back to "quality" mode, or it never changes at all
isn't a bug.. is a visual misinterpretaion ...
every time you open the advenced audio setting the values inside were reset.
but automkv will remember the setting.

anyway in next update the bitrate (after selecting -cbr/-cb) will be display correctly

about point 1 and 2... automkv don't know visual aspect or duration of movie before launching the encoding... so will be difficult to know lenght or crop..however i got the point and added in todo list :)

thanks !

BHH

[glynor]

Sorry I didn't reply earlier -- It's been a week I'd rather forget.

I still haven't gotten the logs of the failed encodes (sorry), but regarding AutoMKV not having my Daemon Tools virtual drive available:

It's Drive V. It doesn't show up in the combobox list of drive letters at all next to the Check DVD drive button, so I can't choose it.

Just so you know, I assigned the virtual drive to V: by selecting it in the "Disk Management" MMC and changing the drive letter. I don't think this should make any difference, but I thought I'd mention it...

[buzzqw]

@glynor

fixed !

till 0.75 i will not enumerate all drive but only till j:
in next release i will enumerate all existing drivers (from a: to z: if presents)

BHH

[vgiozo]

about point 1 and 2... automkv don't know visual aspect or duration of movie before launching the encoding... so will be difficult to know lenght or crop..however i got the point and added in todo list :)

thanks !

I initially got the idea from Nero Recode...when one loads a ripped dvd, the program runs a short analysis and then presents, tunes resolution based on bitrate, etc...
Is there a way for AutoMkv to do some sort of analysis like that? (maybe it could be optional)

..maybe I'm asking for too much...this feature wasn't even in AutoGK which I was previously using...
Also I would not want the orientation of the program to change...this is mostly an automated (but not feature and performance decreased) program...

...but sometimes even for those who value their time and don't want to overlook a program while running as well as for those who are newbies (like me) and are not in fact willing to know much about video encoding, the above mentioned feature could be useful...

When loading the IFO file, isn't the duration of the movie shown somewhere ? (it must be in the subtitles if I'm not mistaken, eg PGC 01:45:38)
Could the program read the duration from there?

I'm so NOT in the know about such things, so all of the above are based on mere empirical observations...


Anyway, thanks once again, congratulations for the effort...

[buzzqw]

Is there a way for AutoMkv to do some sort of analysis like that? (maybe it could be optional)

this kind of analysis are performed when automkv starts.
I will index the movie, computing the lenght,width, framerate... then it will start a compression test to determine better width/height

When loading the IFO file, isn't the duration of the movie shown somewhere ? (it must be in the subtitles if I'm not mistaken, eg PGC 01:45:38)

yes, it is the movie lenght

Could the program read the duration from there?
yes again, but dvd as input is one of the many type of input file that AutoMKV can process
maybe in a next future i will include mediainfo... and then i will know the lenght of movie..

Anyway automkv prefer to have a size to hit then to specify the bitrate, however you can specify the bitrate or the quality to use

BHH

[TheRyuu]

I keep getting an "audio wasn't encoded properly".

Log:
11:26:53 0.75 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
11:26:53 Selected Input file: C:\Ep1\VTS_03_0.IFO
11:26:53 Selected Output dir: C:\Ep1\temp\
11:26:53 Selected Final Name: EP_1
11:26:53 Selected Container type: MKV
11:26:53 Selected Encoder: XviD
11:26:53 Selected Size: 700
11:26:53 Selected Slice: 1
11:26:53 Selected Profile: XviD_Extra_Slow.xml
11:26:53 Selected Width: 720
11:26:53 Selected Resizer: Lanczos4Resize
11:26:53 Selected Filters: Convolution3d (preset="animeHQ")
11:26:53 Selected Deinterlacer: Interlaced
11:26:53 Selected Field Order: TFF
11:26:53 NeroAACEnc.exe: not present
11:26:53 Enabled CRF/CQ AutoRes at 2.5 value
11:26:53 Track Language 1: English (AC3 2ch, 0xBD 0x80) [0]
11:26:53 Audio Codec 1: Ogg Vorbis
11:26:53 Audio Quality 1: 5
11:26:53 Audio Channel 1: Original
11:26:53 Advanced Audio Settings DUMP Track 1
11:26:53 Nero Option Profiles: AUTO --- Encoding Mode: Quality
11:26:53 CCT Option Profiles: AUTO --- Channel Options: AUTO
11:26:53 Lame Settings: VBR
11:26:53 Audio Normalization: 1
11:26:53 Frequency: AUTO --- Tempo : NONE
11:26:53 Pitch: NONE --- Other Add :
11:26:53 Advanced Audio Settings DUMP Track 2
11:26:53 Nero Option Profiles: AUTO --- Encoding Mode: Quality
11:26:53 CCT Option Profiles: AUTO --- Channel Options: AUTO
11:26:53 Lame Settings: VBR
11:26:53 Audio Normalization: 1
11:26:53 Frequency: AUTO --- Tempo : NONE
11:26:53 Pitch: NONE --- Other Add :
11:26:53 Selected 1' Sub tracks: RIP ALL SUBS
11:26:53 Activate use ProjectX
11:26:53
11:26:53 Starting SubRipping
11:27:31 Subtitle Size: 2488320 bytes
11:27:31 Finished SubRipping
11:27:31 Starting Indexing
11:27:31 Dgindex CMD: C:\_Downloads\AutoMKV\AutoMKV074\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=1 -YR=2 -AIF=[C:\Ep1\VTS_03_1.vob] -OF=[C:Ep1\temp\movie] -exit -minimize
11:27:41 Finished indexing
11:27:41 Starting fixing audio delay on track number 1
11:27:41 DelayCut CMD: C:\_Downloads\AutoMKV\AutoMKV074\exe\dgindex\Delaycut.exe -auto -out "C:Ep1\temp\fixed1.ac3" "C:Ep1\temp\movie T01 2_0ch 192Kbps DELAY 467ms.ac3"
11:27:41 Original 1' Audio Size: 35493888 bytes
11:27:41 Finished fixing audio delay
11:27:42 Encoding C:\Ep1\temp\fixed1.ac3 to Ogg with 5 quality
11:27:45 Encoded 1' Audio Track: 4455 bytes

If I use "ProjectX for TS files" and uncheck DelayCut it does work (for 1 audio track only) but then the audio is way out of sync. So I kinda do need some way to fix the audio delay.
I'm making such a big file, if I just use the original audio ac3 file without any re-encoding I guess that might work right?

[gonwk]

Hi folks,

@ Buzzqw, THANK YOU for your Reply and LOVE Your Program.

@ dlflannery, THANK YOU Very Much for your pointer ...
You are right ... my clip was a MPEG1, Chinese Karate movie clip ... I wanted to combine couple of my VCD's into 1 dvd ... so I had stripped the .DAT movie file ... and just copied it to a DVD and played it on my Philips DVD Player and I noticed that I could not select Mono Audio for the playback ... since the Darn "Stereo" audio of the VCD sounds Horribly Garbly ... like there are 2 different channels playing over each other ... so I Demuxed Audio and Video using DGIndex and fixed Audio from what it was to "Mono" and combined back ...
Anyway, sorry about Bore'ing you with my Story!
BTW, do you know of a STABLE, ACCURATE, and Freeware for Muxing up Video & Audio.

Thanks,
G!

[buzzqw]

sorry... but why use "ProjectX for TS files" if your input is an ifo (dvd)?

projectx (must) be used only for ts or dvr/pvr files not for normal vobs

so DON'T CHECK USE PROJECTX AND CHECK USE DELAY CUT

you shouldn't have problem :)

but if any , please report back

BHH

[buzzqw]

BTW, do you know of a STABLE, ACCURATE, and Freeware for Muxing up Video & Audio.

with automkv isn't needed !

if you feed automkv with the d2v file , automkv will ask for an audio file, so select your file. Then in downmix routines select Mono ! :)

BHH

[Shark_jlc]

sorry... but why use "ProjectX for TS files" if your input is an ifo (dvd)?

projectx (must) be used only for ts or dvr/pvr files not for normal vobs
...

BHH

Can you add this kind of logic into AutoMKV, so these kind of wrong choices cannot be made?

[buzzqw]

@Shark_jlc

ADDED ! for this specific case, only if input is TS (or family) files the Use ProjectX and Custom X.ini will be abled.

Thanks for suggestion !

feel free to report any "misleading" fuction !

BHH

[gonwk]

Hi Buzzqw,

God Bless You Dude!

It does help if I know how to use the full power of your Tool.
I did not even realize that I could feed it .d2v.

BTW, you know I like Guides in any format but Wiki's to me are pain since you have to roll from page to page ... how about a "Printer-Friendly" format ... you know just single running page or .pdf or ...!?!?!?

THANKS AGAIN.

G!:)

[buzzqw]

open the wiki page, click left on HELP
after loading, click on left Printable Version ! (i hope will be enough.. or if you want i can build the pdf version)

about d2v : http://automkv.wiki-site.com/index.php/Help:Contents#Step_1_-_Set_Input_File

in next full package i will include a pdf version :)

BHH

[gonwk]

Hi Buzzqw,

I must be BLIND ... I saw it ... thanks ... More than enough.

G! "Dummy"

[Shark_jlc]

In regards to the drop down which shows current status on the Main tab.

I believe it is showing everything that happens in the log, correct?

So, why not just make it a Status Bar, instead of a drop down? That seems like a more appropriate control type to use for that feature.

[buzzqw]

the true log stay in AutoMKV log tab

the drop-down box is to log main events and i use it to give some hits/tips/help

i will glady add more help in this box (is simply triggered by clicking on varius buttons of automkv)

BHH