Media Player Classic - Home Cinema (MPC-HC) - v1.7.13

[3421]

You've probably not understood. Additional information sent a personal message. I gave little information to understand what I mean.

[fvisagie]

How about displaying movie info, e.g. from IMDB? I'm not too particular about exactly how and where that might be displayed, but it would be a great help selecting titles for viewing when you've got nothing particular in mind.

I'd be happy to add this to the Trac if it might receive some consideration.

Thanks for this great project.

[minaust]

I've been using my own builds of MPC-HC for quite some time now, and I've never had a build fail until now. I get this:in the log folder:

16:55:36.332 51>LINK : fatal error LNK1181: cannot open input file 'notelemetry.obj' [c:\MPC-HC\src\mpc-hc\CrashReporterDialog\CrashReporterDialog.vcxproj]


I attempted the build with this:
build.bat both packages
build.bat both lite packages
build.bat both filters 7z

Building from the solution fails similarly, 'notelemetry.obj' being unavailable.

My build environment appears sane, I've since built nightly 207 error free using the above three build steps. Or is there a subtle problem I've missed?

windows 7 Pro x64, VS 2015.

[nevcairiel]

You probably need Update 2 for VS2015.

[minaust]

You probably need Update 2 for VS2015.
Worth a shot.

Edit: That did the trick... Thanks.

[3421]

What buffer size (KB) used in BufferFilter.ax?

[3421]

With files with a large bitrate (very large ~25 Mbit/sec) with BufferFilter distorted image. What decoder is used does not matter (H/W or S/W).
https://www.cubbyusercontent.com/pl/info.7z/_258bb0b51e7d468b8b67797991f382b9

[amayra]

thanks for your hard but there somthing really annoying me about MPC-like player
can you add option for control of double click with mouse button to exit full screen this happen all time and i hate this when it happens if you make it " ESC" button only this will be great

[Snowknight26]

Unbind double left click under Fullscreen in the options.

[vBm]

thanks for your hard but there somthing really annoying me about MPC-like player
can you add option for control of double click with mouse button to exit full screen this happen all time and i hate this when it happens if you make it " ESC" button only this will be great

You sure do like to spam all available places with the same question xD

Do like Snowknight26 told you. Same answer you've got on https://trac.mpc-hc.org/ticket/5857#comment:1

[3421]

Take a file from another topic. Not displayed subtitle in this video. Player 234.

For this video need enable Internal Subtitle Render. Only choose in lav S: pgs is not enough.

http://forum.doom9.org/attachment.php?attachmentid=15426&d=1465260979

http://forum.doom9.org/attachment.php?attachmentid=15427&d=1465260985

[P.J]

Wish the single click for play/pause and Auto-zoom were disabled by default
Also if Rewind current file was enabled by default

[rock]

Hi, if madVR can use internal shaders, I think cache compiled shaders shouldn't be greyed out.

[amayra]

can you add assFilterMod (http://forum.doom9.org/showthread.php?p=1769770) Support please

[sneaker_ger]

There's already a pull request for that.
https://github.com/mpc-hc/mpc-hc/pull/166

[huhn]

is there a reason an external filter preffered lav splitter/*source isn't used over the internal lavfilter version?

and nice high DPI support. ok i have to say they feel a little bit strange because i'm used to the small ones but nice work.

[kasper93]

can you add assFilterMod (http://forum.doom9.org/showthread.php?p=1769770) Support please

I compiled version with (hopefully) support for assFilterMod
https://www.dropbox.com/sh/i9s7wk0rsbfoxok/AADXNThrrfZg36ANVYfkmV3za

I'm not going to add it to the MPC-HC just yet. assFilterMod is very young project and we need to see where it is heeding first. Right now it is picked up alexmarsev code with added settings window and some other tweaks. It is literally not tested and it only supports text subtitles so in order to use it we would need some sort of dynamic switching to other renderer which can support pgs/dvb/vob and other formats that are supported in MPC-HC at this moment.

is there a reason an external filter preffered lav splitter/*source isn't used over the internal lavfilter version?

and nice high DPI support. ok i have to say they feel a little bit strange because i'm used to the small ones but nice work.

If internal splitter is selected it will be used even if there is other prefered filter. At least I think I need to double check that. Anyway if you think something is not working as it should feel free to suggest change and we may implement it :)

As for toolbar size, it was way too small for moderns resolutions and above all it wasn't called to dpi. I think now it is little bit better.

[huhn]

If internal splitter is selected it will be used even if there is other prefered filter. At least I think I need to double check that. Anyway if you think something is not working as it should feel free to suggest change and we may implement it :)

disabling all internal filter to use external filters is quite some work compared to adding an external filter and setting it to preferred.

there is no need to change anything. i personally only disable them for testing anyway. it it just inconsistent and more work.

As for toolbar size, it was way too small for moderns resolutions and above all it wasn't called to dpi. I think now it is little bit better.

no question of cause it is better now.

with 200% scaling it is about 300% as big as before. i'm not sure about that size yet. i'm just to used to the very small ones.

edit:
I compiled version with (hopefully) support for assFilterMod
https://www.dropbox.com/sh/i9s7wk0rs...g36ANVYfkmV3za

xy subfilter is used when assfilter is selected.
selecting xy subfilter as a subtitle renderer and bocking it is loading assfiltermod totally fine.

[Snowknight26]

Can anyone do anything about Trac not sending out verification emails? Can't submit new tickets or post comments until the mailer is fixed.

Or better yet, need a debug log for ticket 5856 - Internal Audio Renderer not bypassing Windows mixer in WASAPI Exclusive (https://trac.mpc-hc.org/ticket/5856)? :P

[nevcairiel]

disabling all internal filter to use external filters is quite some work compared to adding an external filter and setting it to preferred.

Its like two clicks to disable all internal filters, open internal filter list -> right click in the list -> disable all

[huhn]

ok thanks that's pretty useful to know.

[chros]

need a debug log for ticket 5856 - Internal Audio Renderer not bypassing Windows mixer in WASAPI Exclusive (https://trac.mpc-hc.org/ticket/5856)? :P
If I understand you correctly, you don't need it. :)
It's a known "bug", it's already fixed in the main repo (https://github.com/alexmarsev/sanear) but it hasn't been integrated into MPC-HC yet.
I've compiled a standalone filter from master and it's working as it should, you can use it in the meantime: http://forum.doom9.org/showthread.php?p=1767992#post1767992

[Snowknight26]

If I understand you correctly, you don't need it. :)
It's a known "bug", it's already fixed in the main repo (https://github.com/alexmarsev/sanear) but it hasn't been integrated into MPC-HC yet.
I've compiled a standalone filter from master and it's working as it should, you can use it in the meantime: http://forum.doom9.org/showthread.php?p=1767992#post1767992

Thanks, that worked.

[clsid]

xy subfilter is used when assfilter is selected.
selecting xy subfilter as a subtitle renderer and bocking it is loading assfiltermod totally fine.The patch is missing an addition in FGManager.cpp to automatically block the other subtitle filters. Easy to fix.

[mbordas]

I've compiled a standalone filter from master and it's working as it should, you can use it in the meantime: http://forum.doom9.org/showthread.php?p=1767992#post1767992

Odd, it's not working for me, it still follows the windows mixer settings. This is with the 64 bit version of MPC-HC and your build of sanear.ax. Has anyone else noticed this?

[Snowknight26]

Odd, it's not working for me, it still follows the windows mixer settings. This is with the 64 bit version of MPC-HC and your build of sanear.ax. Has anyone else noticed this?

Not sure how you managed that because you can't use 32-bit filters in a 64-bit program. Register sanea64.ax and then add it to the external filters list as a preferred filter.

[mbordas]

Sorry, I meant sanear64.ax. But now I'm confused - is adding sanear as an external filter the same as setting it as the default audio renderer under Playback->Output?

In any case, I get the same result - it follows the windows (in my case, realtek driver) setting.

[Blitzker]

The patch is missing an addition in FGManager.cpp to automatically block the other subtitle filters. Easy to fix.

Thanks! The pull request is now updated with the fix.

[Snowknight26]

Sorry, I meant sanear64.ax. But now I'm confused - is adding sanear as an external filter the same as setting it as the default audio renderer under Playback->Output?

In any case, I get the same result - it follows the windows (in my case, realtek driver) setting.

If you add Sanear to the external list and set it as preferred, it will be used regardless of what you choose under Output. So no, it's not the same, despite it being the same code (though chros's build is newer).

Once you play a file, go to your system tray, right click on the Sanear icon and make sure "Ignore system channel mixer [...]" and probably "WASAPI Exclusive" mode is checked. I couldn't get correct channel output working without the later checked.

[rock]

If you download https://github.com/alexmarsev/sanear/releases, you'll get register.bat and unregister.bat, use that with latest build from chros. I also found a compiled sanear from http://tmod.nmm-hd.org/Misc/sanear-v0.3-97-git-r423%28f7612c7%29.7z, included bat files.

[mbordas]

Once you play a file, go to your system tray, right click on the Sanear icon and make sure "Ignore system channel mixer [...]" and probably "WASAPI Exclusive" mode is checked. I couldn't get correct channel output working without the later checked.

"Ignore system channel mixer" is greyed out - it says "always ignored in exclusive WASAPI mode". So it sounds like the setup is right, but when I go to Filters->Sanear Audio Renderer, the channels are remixed to match the windows setting, and next to Processors it say "Matrix, Limiter".

So I'm not sure what else to try. Is this latest sanear build part of the nightlies? I haven't tried that yet, this is with the release version of 1.7.10

[chros]

Is this latest sanear build part of the nightlies? I haven't tried that yet, this is with the release version of 1.7.10
No, it isn't.

"Ignore system channel mixer" is greyed out - it says "always ignored in exclusive WASAPI mode". So it sounds like the setup is right, but when I go to Filters->Sanear Audio Renderer, the channels are remixed to match the windows setting, and next to Processors it say "Matrix, Limiter".
So I'm not sure what else to try.
Interesting :) So:
1. do you have sanear tray icon during playback? (I guess so)
2. is Exclusive WASAPI mode checked in system tray settings?
3. go to system sound settings in Windows, select your sound device, hit properties, go to advanced tab, see if "Allow applications to take exclusive control of this device" and "Give exclusive mode applications priority" are checked

If all these 3 are true then it should work.

[HelmedHorror]

Anyone have any idea why this weird visual glitch (https://gfycat.com/TheseReliableGrison) occurs in MPC-HC but not in VLC? (VLC on the left, MPC-HC on the right). It continues to flicker like that for the entirety of the video.

Also noteworthy: it's a remux from .mkv .mp4 but otherwise identical video, but the mkv copy does not glitch like this.

I do a lot of remuxing and have used MPC-HC for years and I never seen anything like this before.

Redoing the remux still causes the same problem.

This particular video was remuxed along with two other MKV files and yet the other two files are fine with no glitches after the remux.

EDIT: Additional troubleshooting revealed the culprit: MadVR's smooth motion setting. Still, I'm baffled why this glitching doesn't happen on the bit-identical mkv copy of the video. Only on the mp4 remux.

[JarrettH]

I know I shouldn't ask, but will there be a new release soon? It's going on 7 months or so

[mbordas]

1. do you have sanear tray icon during playback? (I guess so)
2. is Exclusive WASAPI mode checked in system tray settings?
3. go to system sound settings in Windows, select your sound device, hit properties, go to advanced tab, see if "Allow applications to take exclusive control of this device" and "Give exclusive mode applications priority" are checked

If all these 3 are true then it should work.

Yes to all three. If anyone else has tried the 64 bit version, let us know so at least we can assume it must be something wrong with my installation rather than a bug in the sanear renderer.

[chros]

Yes to all three. If anyone else has tried the 64 bit version, let us know so at least we can assume it must be something wrong with my installation rather than a bug in the sanear renderer.
Is exclusive mode working for you with different players? (mpc-hc x32, mpc-be, potplayer, winamp+yasapi plugin)
What OS/card/driver do you have?

[Snowknight26]

Yes to all three. If anyone else has tried the 64 bit version, let us know so at least we can assume it must be something wrong with my installation rather than a bug in the sanear renderer.

I've already said it works for me, but that doesn't rule out it being a bug.

[GCRaistlin]

Where does MPC-HC try to save images on F5? I get "Cannot create file" message even under admin account on WinXP.

[clsid]

Where does MPC-HC try to save images on F5? I get "Cannot create file" message even under admin account on WinXP.Use Alt+I and choose the desired folder. It should then use that same folder when you use F5.

@mbordas
Go to the Sound settings in Windows Control Panel. Open the properties of your audio device. On the Advanced tab there are two options for exclusive mode that should be enabled.

[GCRaistlin]

Looks like a bug, doesn't it?

[clsid]

Not really. More likely user error, or a broken system. It defaults to your "My Pictures" folder.

[GCRaistlin]

It surely does. The reason was the SnapShotPath value in my ini file that has pointed to a non-existing folder (the one I've used for the last time).

[mbordas]

Is exclusive mode working for you with different players? (mpc-hc x32, mpc-be, potplayer, winamp+yasapi plugin)
What OS/card/driver do you have?

I've been using reclock with MPC-HC for years and switched to sanear recently cause it now supports WASAPI exclusive. Other than that, I haven't changed anything in my system.

Win 8.1 x64, Nvidia GTX 460 with 368.39 driver, Realtek R2.79 audio driver.

I tried installing the 32bit version of MPC-HC and sanear.ax, and got the same result. Very odd.

http://i65.tinypic.com/1z301fr.jpg

[chros]

Win 8.1 x64, Nvidia GTX 460 with 368.39 driver, Realtek R2.79 audio driver.

I tried installing the 32bit version of MPC-HC and sanear.ax, and got the same result. Very odd.
Indeed. There's 1 more thing to try: other players with their wasapi implementation.

[mbordas]

Potplayer 64 seems to work. With the windows/realtek mixer set to stereo:

http://i64.tinypic.com/2s80bcg.png

My guess is it has something to do with the realtek driver.

[LigH]

I could not see the ^ embedded image because it was wrapped into an ad-bloated website, therefore as link:

http://i64.tinypic.com/2s80bcg.png

[chros]

Potplayer 64 seems to work. With the windows/realtek mixer set to stereo:
My guess is it has something to do with the realtek driver.
Can you try with mpc-be? Set:
- Audio -> Audio renderer : MPC Audio Renderer (set it to Exclusive in WASAPI mode)
During playback you can check the results with: Filters -> MPC Audio Renderer -> Properties -> Status tab.

[mbordas]

At least I'm not totally crazy :). This is with the sound mixer set to stereo.

http://i67.tinypic.com/23wjn83.png

http://i67.tinypic.com/23wjn83.png

http://i66.tinypic.com/2q1yrl3.png

http://i66.tinypic.com/2q1yrl3.png

One more note: I added the sanear renderer as an external filter to MPC-BE, and got the same result as with MPC-HC: it still follows the mixer.

[prashanth]

Hi,

I'm setting up MPC-HC to meet my daily requirements, and I have a lot of questions regarding customizing it.

1) Is it possible to change the OSD position from top-left to top-right?
If not, See the Ticket #1383 at the below page. OSD were placed in top-right, at least in the previous versions.
https://stable.mpc-hc.org/MPC%20HomeCinema%20-%20Win32/MPC-HC%20v1.5.2.3456_32%20bits/README.txt

2) I'd like a preview of the snapshot ("Save Image auto"), displayed in the top left, along with directory path and filename the snap will be saved. Possible?

3) Can I define the time value for the option "Jump Forward - Large"?

4) With the default "Internal Subtitle Renderer", the subs don't appear in the snaps. So I chose "VSFilter/ DirectVobSub" and the subs appear in snaps. However, for MKV files which has soft-coded subs track, only the Internal Renderer displays the subtitles in playback.
Any way to acheive both these funtions from using any one sub renderer? (If not, no probs. I could remux into mp4 using mkvtoolnix).

Thanks for any response.

[chros]

At least I'm not totally crazy :). This is with the sound mixer set to stereo.

One more note: I added the sanear renderer as an external filter to MPC-BE, and got the same result as with MPC-HC: it still follows the mixer.
:) OK, so that means it's not a driver problem. Since nobody reported this problem with the new version: are you sure that you use the new version as an external filter and not the 0.3 version (which is also integrated into MPC-HC)?
1. unregister the filter
2. playback something with MPC-HC: you shouldn't see the Sanear tray icon.
3. register the new filter again
4. it should work! :)

3) Can I define the time value for the option "Jump Forward - Large"?

4) With the default "Internal Subtitle Renderer", the subs don't appear in the snaps.
3. You can: in Options -> Tweaks.
4. What do you mean about snaps?