ffdshow tryout project : HD audio discussion [Archive] - Page 21

SamuriHL

6th January 2010, 20:30

You're right my friend !!!

I updated my little program and this formula works for every buffers !

Thank you so much!!

Does this mean you can fix it in ffdshow with that revelation? That was most impressive! :)

albain

6th January 2010, 20:33

I can do better than that

Here is a new updated build (http://damienbt.free.fr/ffdshow_rev3181_20100104_dbt_dxva_beta5.exe)

Please tell me about it

Merci BSAlita !
(you work for Arcsoft and have the code in front your eyes ;-) ?)

SamuriHL

6th January 2010, 20:36

LOL! :) I'm on it. Give me about 2 minutes.

SamuriHL

6th January 2010, 20:44

Unfortunately, no, that didn't work. I get no connection to the receiver now.

http://pastebin.com/pastebin.php?dl=d1ee8e413

:(

BSalita

6th January 2010, 20:44

The problem was obscured by displaying the list in decimal. In hex the formula is obvious.

SamuriHL

6th January 2010, 20:53

What is the dwChannelMask 255??

albain

6th January 2010, 21:01

Unfortunately, no, that didn't work. I get no connection to the receiver now.

http://pastebin.com/pastebin.php?dl=d1ee8e413

:(

I have been too quick. I forgot to remove the 12 extrabytez

SamuriHL

6th January 2010, 21:07

Ok, let me know when you're ready and I'll try again.

albain

6th January 2010, 21:48

Can you try again ? (same link)

Thanks

SamuriHL

6th January 2010, 21:54

I'm on it now.

Wireballz

6th January 2010, 21:55

Can you try again ? (same link)

It WORKS !!!!!!!! YOU THE MAN :)

HI RES WORKS to DTS-HD MA WORKS :)

SamuriHL

6th January 2010, 21:56

MUAHAHAHHAHHA! I love you guys! Yes, that fixed it. THANK YOU SO MUCH!!!!!

albain

6th January 2010, 21:57

Et voilà !

Good evening guys

Time to watch a movie for me...

Wireballz

6th January 2010, 22:00

Thank you Albain and others :):p

SamuriHL

6th January 2010, 22:00

Awesome, enjoy your movie! I really appreciate this fix.

Sebastiii

6th January 2010, 22:03

Enjoy your movie too :) Great news :) i'm go to testing :)
Youpi :)
Merci Damien :) and BSalita for the formula :)
BIG THX,
Seb.

SamuriHL

6th January 2010, 22:05

Holy ****! Hey, Seb...your DTS-HD HR file works now and shows HR on my receiver. :)

SamuriHL

6th January 2010, 22:10

So it looks like the only thing not working right now besides EAC3 (not an ffdshow problem) is TrueHD 2.0 channel. This is AWESOME!

Wireballz

6th January 2010, 22:14

So it looks like the only thing not working right now besides EAC3 (not an ffdshow problem) is TrueHD 2.0 channel. This is AWESOME!

TrueHD 2.0 Works here just shows stereo and when you status on you pio you will see TrueHD :) but 2.0

SamuriHL

6th January 2010, 22:15

TrueHD 2.0 Works here just show stereo and when you status on you pio you will see TrueHD :) but 2.0

Not for me with the sample someone in this thread provided. I get no audio at all. However, it does play in PDVD9 so I know it's not the sample file. But that's now the only thing that doesn't match what PDVD9 gives me. This is so awesome.

Wireballz

6th January 2010, 22:16

Not for me with the sample someone in this thread provided. I get no audio at all. However, it does play in PDVD9 so I know it's not the sample file. But that's now the only thing that doesn't match what PDVD9 gives me. This is so awesome.

Same sample of a old guy talking at a table plays perfect on my 1019 :)

SamuriHL

6th January 2010, 22:17

Yea, that'd be the one. I can't get it to play for me. Interesting.

SamuriHL

6th January 2010, 22:18

Wait, what audio renderer are you using? Maybe that's the difference.

Wireballz

6th January 2010, 22:20

Yea, that'd be the one. I can't get it to play for me. Interesting.

what do you have on put for me all checked pass-through spidf

connect as: DirectSound

strange.

SamuriHL

6th January 2010, 22:20

Yea, that's the issue. I change it to Realtek HDMI audio renderer and now it plays fine. I'll have to trap the logs to see what the difference is between that and the Default DirectShow renderer I like to use.

Wireballz

6th January 2010, 22:22

Wait, what audio renderer are you using? Maybe that's the difference.

Realtek Hdmi Output (ATI HDMI A (00200000)

Wireballz

6th January 2010, 22:22

SamuriHL

6th January 2010, 22:24

TrueHD 2.0 "Being.There.1979.sample.m2ts"

Realtek HDMI audio renderer (working): http://pastebin.com/pastebin.php?dl=m7b125da4
Default DirectSound audio renderer (non-working): http://pastebin.com/pastebin.php?dl=m56c5a1f6

Maybe that stands out, I don't know.

David602

6th January 2010, 22:35

Et voilà !

Good evening guys

Time to watch a movie for me...

I'm stuck at work right now but I can't wait to get home tonight and try this!!! This is exciting to be on the cutting edge of open source bit streaming.

Thanks for all the work!!

rica

6th January 2010, 23:18

I get DTSHD-MA without audio dropouts when video decoder selected in DXVA mode. (default direct sound and Mpc Audio Renderer)
Video software mode still doesn't work and gives worse dropouts with this build.

albain

6th January 2010, 23:30

SamuriHL

6th January 2010, 23:34

albain, any thoughts on the renderer thing with TrueHD 2.0? No big deal if not, as we can get everything to work with other renderers. I've tested a crapload of stuff now and it ALL works flawlessly with my Pio. So, job well done!!

rica

6th January 2010, 23:35

Yes, that's still AMD's drivers which are faulty

But i never understand how WinDVD 2010 works in SW mode too with the same drivers? (PDVD9 can't)

I should correct my mistake:
WinDVD Pro 2010 can be set to SW mode (video) as well and no problem in SW mode too while PDVD9 would be never set to SW mode.

IMO the comparison must be made between ffdshow and wDVD so as to check what is happening?

Any opinion on reg hack of WinDVD to connect to remote graph?

BTW i can reach the DS chain of PDVD9 while i can't do it on WinDVD, any ideas? (DirectShow Filter Graph Spy has been used btw.)

http://img695.imageshack.us/img695/1201/p001.th.png (http://img695.imageshack.us/i/p001.png/)

And i can scan the backstage of Arcsoft TMT -even it gives core dts or ac3 with an Ati btw-

http://img222.imageshack.us/img222/4254/a001.th.png (http://img222.imageshack.us/i/a001.png/)

Sebastiii

6th January 2010, 23:42

So it looks like the only thing not working right now besides EAC3 (not an ffdshow problem) is TrueHD 2.0 channel. This is AWESOME!

Hi, i have not reconnect ATI to AVR but i'm with Xonar, and for now my avr detect again DTS-MA for sample HR with ffdshow.
I am tring TMT just now and DTS-MA 5.1.

I'm crasy lol.

I just put ATI -> AVR and make test,
Bitstream it works with Arcsoft Renderer and ATI HDMI OUTPUT.
In .m2ts and HW Dxva
THD 7.1 -> OK
DTS-MA 7.1 -> OK
DTS-HR 7.1 -> DTS-MA 5.1
THD 2.0 -> NOK

In MKV :
DTS-MA 7.1 -> OK but the video is slow (it slow on all other test that i made) maybe that comes from my sample and i don't have other to confirm this.

I confirm too that THD 2.0 work with ATI HDMI OUT only.

I don't understand why DTS-HR don't working even with TMT and information on screen say me DTS-HR HDMI Passthroup.

I try with PDVD to see what happen.
EDIT : DTS-HR 7.1 is good with PDVD.

I'm comes crasy boy lol

Thx :)
Seb.

SamuriHL

6th January 2010, 23:45

But i never understand how WinDVD 2010 works in SW mode too with the same drivers? (PDVD9 can't)

Likely because WinDVD doesn't seem to be using directshow. For instance, I can't connect to WinDVD's graph when playing anything. So, I don't think that's a good test.

Andy o

6th January 2010, 23:46

Great news to wake up to. Thanks all!

Andy o

6th January 2010, 23:47

BTW, the dropout issue in SW mode also happens with DTS-HD MA? It's not only DD/DTS? Cause I briefly tried a flac mkv and it didn't seem to happen.

SamuriHL

6th January 2010, 23:48

Hi, i have not reconnect ATI to AVR but i'm with Xonar, and for now my avr detect again DTS-MA for sample HR with ffdshow.
I am tring TMT just now and DTS-MA 5.1.

I'm crasy lol.

I just put ATI -> AVR and make test,
Bitstream it works with Arcsoft Renderer and ATI HDMI OUTPUT.
In .m2ts and HW Dxva
THD 7.1 -> OK
DTS-MA 7.1 -> OK
DTS-HR 7.1 -> DTS-MA 5.1
THD 2.0 -> NOK

In MKV :
DTS-MA 7.1 -> OK but the video is slow (it slow on all other test that i made) maybe that comes from my sample and i don't have other to confirm this.

I confirm too that THD 2.0 work with ATI HDMI OUT only.

I don't understand why DTS-HR don't working even with TMT and information on screen say me DTS-HR HDMI Passthroup.

I try with PDVD to see what happen.
EDIT : DTS-HR 7.1 is good with PDVD.

I'm comes crasy boy lol

Thx :)
Seb.

I get the DTS-HD HR in 7.1 with my ATI using the Realtek HDMI audio renderer. (Works with Default DirectSound, too, actually) I can try on the Xonar later and see what I get there.

rica

6th January 2010, 23:53

Likely because WinDVD doesn't seem to be using directshow. For instance, I can't connect to WinDVD's graph when playing anything. So, I don't think that's a good test.

You mean "media foundation" stuff?

SamuriHL

6th January 2010, 23:55

You mean "media foundation" stuff?

Yea, that's what I'm thinking, anyway. So I don't think WinDVD is a good test. I'm not sure about TMT3 and whether it can be turned off there.

Sebastiii

6th January 2010, 23:56

Thx SamuriHL :)

Andy o

6th January 2010, 23:58

I'm not 100% sure what you guys are talking about, but with DVDs and WinDVD 2010, I do get dropouts with software mode.

rica

6th January 2010, 23:59

So the only hope ArcSoft will implement the new patch of TMT3 in DS stuff to compare?

rica

7th January 2010, 00:01

I'm not 100% sure what you guys are talking about, but with DVDs and WinDVD 2010, I do get dropouts with software mode.

Never tried any SD DVD, i've given it a go always with blues.

Andy o

7th January 2010, 00:02

I didn't know you could disable HW accel for blurays. Which discs have you tested?

rica

7th January 2010, 00:06

I didn't know you could disable HW accel for blurays. Which discs have you tested?

Close Encounters, Hitman, Angels Demons...
Open WDVD ( without any disc) and setup video to SW mode and restart it and play BD.

whurlston

7th January 2010, 00:07

Likely because WinDVD doesn't seem to be using directshow. For instance, I can't connect to WinDVD's graph when playing anything. So, I don't think that's a good test.

WinDVD does use DirectShow when playing SD DVDs, just not for Blu-rays.