smartLabs tsMuxeR: Transport Stream muxer

[fifteen]

If tsmuxer devs read this:

It seems as though tsmuxer adds garbage at the end of wav files when demuxing...

Please see:

http://forum.doom9.org/showthread.php?t=145479

[mrr19121970]

All Versions Upto V1.8.22:

"E:\TVIX\tsMuxeR\tsMuxeR_1.8.22(b)\tsMuxeR.exe" "S:\BDMV\STREAM
\00000.m2ts"
SmartLabs tsMuxeR. Version 1.8.22(b) http://www.smlabs.net
Track ID: 4113
Can't detect stream type
Track ID: 4352
Stream type: DTS-HD
Stream ID: A_DTS
Stream info: Bitrate: 1536Kbps DTS core + MLP data. Sample Rate: 48KHz Channel
s: 6
Stream lang: deu
Track ID: 4353
Stream type: DTS-HD
Stream ID: A_DTS
Stream info: Bitrate: 1536Kbps DTS core + MLP data. Sample Rate: 48KHz Channel
s: 6
Stream lang: eng
Track ID: 4608
Stream type: PGS
Stream ID: S_HDMV/PGS
Stream info: Presentation Graphic Stream #0
Stream lang: deu


BDInfo & eac3to correctly identify this as a VC1 1080i/25

[mrr19121970]

ftp://213.221.6.90/tsMuxer/tsMuxeR_1.8.23(b).zip

[jdobbs]

Wow. They're rally pumping out the versions now, eh?

[Nullity]

Wow. They're rally pumping out the versions now, eh?

Be nice if they included a changelog, but I'll still take it. :)

[ericd]

hi
i always have my subs that doesn t appear on my ps3,even with the very last version of tsmuxer1.8.20 ,i try several things ,so in bluray format it doen t work ,in ts format it doesn t work and in m2ts format it doesn t work too !!
so i try to encode in ts mod and read with kmplayer,and at my big surprise kmplayer says when i launch the ts video this message
"a decoder for the new track could not be found" ??? i m sure thats its about the sub track cause when i go in option / subs / in kmplayer i can read this at the subtrack number 1
: S:PID 4608 (french) (what s that??)
does anybody knows what it means ??

thx

ericd


PLEASE can somebody HELP ME!!!!!

[setarip_old]

@jdobbs

Hi!Wow. They're rally pumping out the versions now, eh?But the official website is still making only v.1.8.4 available for download - Either lackadaisical about posting updates or there's a reason the subsequent betas are being withheld from official download.

BTW - Any idea of whether the ftp link for all of those betas is owned by "Smartlabs" or (the author) "Roman" (and how the link was obtained)? Just wondering if we should be accessing it...

[jdobbs]

About all I can say is it's in Russia and it's 15 hops from me :):

...
9 13 ms 13 ms 13 ms xe-0-3-0-xcr1.ash.cw.net [195.2.17.61]
10 105 ms 105 ms 105 ms xe-5-1-0.xcr1.amd.cw.net [195.2.21.177]
11 129 ms 129 ms 129 ms xe-0-0-0.xcr1.skt.cw.net [195.2.25.90]
12 172 ms 172 ms 174 ms goldentel-gw.skt.cw.net [166.63.220.126]
13 187 ms 187 ms 186 ms ccr2-MEN.Moscow.gldn.net [194.67.17.84]
14 151 ms 150 ms 152 ms 213.33.227.190
15 188 ms 191 ms 191 ms 213.221.6.90

[Underground78]

I don't know if we should have access to that but the sources of the GUI (only) (tsMuxerGUI_1.8.24(b).src.zip) seem to have been released.

[shon3i]

.24 is out and sourcecode too!!! Amazing just checked ftp :D ftp://213.221.6.90/tsMuxer/

[deank]

:) GUI source?! It is not helpful at all :)

[shon3i]

Yes i saw too bad :(. second is Linux version right?

@jdobbs, can you check is bug present?

[jdobbs]

I went to the link and I don't see .24 there at all. I'm also getting errors when I try to download...

[Edit] Whoops. Looks like I just had to do a refresh.

[laserfan]

Too many folks hammering the ftp at once probably. I got it and it looks like they're either done fiddling with it, or it's a first attempt at a package as it includes the cli, the gui, the readme (Russian, nothing obvious I could see as differences), and license.

[jamos]

bug still with LPCM muxing to m2ts and 7.1 channels. moves center channel to right front.

[tebasuna51]

If tsmuxer devs read this:

It seems as though tsmuxer adds garbage at the end of wav files when demuxing...

Please see:

http://forum.doom9.org/showthread.php?t=145479

Was reported to tsmuxer@smartlabs.tv at 2008-11-04

[jdobbs]

Not sure about the end -- but it definitely adds garbage to the beginning. I had to add "silencer" code (modifying the sample values in the WAV files) to get rid of the loud SNAP at the beginning of WAV files.

[teox99]

Hi!
FINALLY i compiled tsMuxer GUI for Linux!!!
everythings goes ok and GUI is working perfect!

---
do you think i can post a link to the compiled gui or it's better not for any license restriction?

[kooibosmania]

JDobbs

Any information of the clpi output in version.24??
in version .23 there were a bunch of 30hex in de streams tracks do you know why ??

You stated fine and corse ep table is no rocket sience can you elaborate on that ??

thanks great fan of fixclpi

[mrr19121970]

You stated fine and corse ep table is no rocket sience can you elaborate on that ??


Quote:
TSMUXER seems to have a small bug that causes fast-forward, rewind, and seeking issues when creating Blu-ray output.

It appears as though the COARSE/FINE table relationship in the .CLPI file isn't being structured properly. The program correctly creates a new COARSE entry with the PTS rolls over (the LSBs contained in the FINE table get to a point where they will require an increment in the COARSE table). But it appears it doesn't do so (at least not always) when the same thing happens to the COARSE/FINE SPN. As a result, you have combined SPN pointers that suddenly drop to very small values (at least until the next COARSE reference)...

Just thought I'd mention it in case someone is keeping the package up-to-date. If not, I guess I can write a simple program to read/rewrite the CLPI (I'd rather see it fixed in the program, though). I just did one by hand and it fixed the problems -- now rewind/fast-forward works correctly and I no longer get "pauses" when I jump between chapters.

Quote:
Easy to write a program -- a little tedious to do by hand. You have to find the instances where it happens and add a new COARSE entry. The easiest way is to just read the tables into memory and then simply rewrite the COARSE/FINE correctly back into the CLPI file (then change the pointers/references).

Quote:
For example, when you try to reverse it will go a few seconds backward and then start going forward. When you seek to a chapter, you sometimes will hear sound for a few seconds before the picture catches up. Some are worse than others. It all depends how far off the packet pointers are off. ...If you dump the table IT IS VERY OBVIOUS there is a mistake in the CLPI.

Quote:
Attached is a small command line program that will correct the CLPI. Just run it with a single parameter that represents the path to the CLPI file that was created by TSMUXER in blu-ray mode. If it finds the error (it will normally be there except on very small muxes) it will rewrite the CLPI with the tables corrected.

[jdobbs]

JDobbs
in version .23 there were a bunch of 30hex in de streams tracks do you know why ?? You see that in commercial sources also. Normally those locations hold a 0x00 value... but for some reason, sometimes you see 0x30, which is the ASCII value for "0"... no idea why or what the reasoning is, but it has no affect I can see. It appears to be in the "reserved for future use" areas.

[Maradona10]

I have a Blu-ray m2ts file loaded in TSMuxer which gives me 2 VC-1 streams.
I only need the 1080p VC-1. can I without problems uncheck the 720p VC-1?

Why are there 2 video streams in this movie?

[teox99]

some movies provide more than one video traks usually two: 1080p for fullHD and 720p for HDReady display. I think you can easily delete one.

[nwg]

They also have PIP video but usually is 480p from the ones I have seen.

[Maradona10]

some movies provide more than one video traks usually two: 1080p for fullHD and 720p for HDReady display. I think you can easily delete one.

But it is in the same m2ts file. Isn't it needed for certain scenes where it switches to the 720p VC-1 or is this wrong thinking?

I have used TSMuxer for Gomorra BD and it plays certain scenes over and over. The main m2ts file is one big one so it isnt that it multiplexed more m2ts files into 1.

I have no clue what could cause this. The audio and subs go on though. Only the video repeats itself afer about 25 min.

[teox99]

usually are two separated video tracks (in the single m2ts file). audio tracks are the same for both video stream. i think is not possible that the movie mix the video tracks during the stream.

[Maradona10]

Also when I sometimes load a m2ts file I get the common "Unsupported Format......Some tracks not recognized. This track was ignored..." It points to the m2ts file I just loaded.

[jdobbs]

I have a Blu-ray m2ts file loaded in TSMuxer which gives me 2 VC-1 streams.
I only need the 1080p VC-1. can I without problems uncheck the 720p VC-1?

Why are there 2 video streams in this movie? Look at the PID. It could be a secondary video stream as nwg mentioned. For example, it may be used for a picture-in-picture function.

[jdobbs]

But it is in the same m2ts file. Isn't it needed for certain scenes where it switches to the 720p VC-1 or is this wrong thinking?

I have used TSMuxer for Gomorra BD and it plays certain scenes over and over. The main m2ts file is one big one so it isnt that it multiplexed more m2ts files into 1.

I have no clue what could cause this. The audio and subs go on though. Only the video repeats itself afer about 25 min.Don't know the particulars of your case so I'm not sure what applies and what doesn't, but the playback is controlled by the MPLS, not the M2TS. The MPLS can reference portions of an M2TS based on the Start and End times in the playitem() entry.

[colinhunt]

mrr19121970, your CLIPINF Editor worked like a charm! Thank you EVER SO much!

[Maradona10]

Don't know the particulars of your case so I'm not sure what applies and what doesn't, but the playback is controlled by the MPLS, not the M2TS. The MPLS can reference portions of an M2TS based on the Start and End times in the playitem() entry.

@jdobbs: where can I find PID?

When I load the BD in BDInfo, the MPLS only points to this particular m2ts file. So what can I do with that?

[jdobbs]

If you open the M2TS or MPLS in TSMUXER, and select DEMUX it will give you the PID number as a part of the filename in the bottom (META) window.

[Maradona10]

If you open the M2TS or MPLS in TSMUXER, and select DEMUX it will give you the PID number as a part of the filename in the bottom (META) window.

The only thing I see is: --no-pcr-on-video-pid

[teox99]

is there any similar solution of BDInfo for linux?

in wine doesn't works.

[jdobbs]

The only thing I see is: --no-pcr-on-video-pid
You have to open one the M2TS file that has the video in it by clicking on the ADD button. You will then see a line in the bottom that says "Track=" -- if the value is 69xx (this is the PID) it is probably a secondary video track, if it is 41xx it isn't.

[Maradona10]

You have to open one the M2TS file that has the video in it by clicking on the ADD button. You will then see a line in the bottom that says "Track=" -- if the value is 69xx (this is the PID) it is probably a secondary video track, if it is 41xx it isn't.

oh ok, thanks.

[jamos]

mrr19121970, your CLIPINF Editor worked like a charm! Thank you EVER SO much!

ermm..do you mean Jdobbs??

[jj666]

No, he means mrr19121970, he has a different utility built into the ClownBD EAC3TO frontend.

Cheers,

-jj-

[coolalibaba]

anybody tried the append function in new GUI(.24)? It doesn't work for me. Click the append and select a file it just does nothing.

[ericd]

PLEASE can somebody HELP ME!!!!!

i just wanted to thx all the people that helps me,(except deank at the very first post)
that means absolutly nobody ,thx again...:(
i thought it was some kind of helping forum but it was a mistake..

ericd

[mrr19121970]

No, he means mrr19121970, he has a different utility built into the ClownBD EAC3TO frontend.

Cheers,

-jj-

no, it's a different one again (standalone, but same logic):

http://forum.doom9.org/showthread.php?p=1247218#post1247218

[idbirch2]

i just wanted to thx all the people that helps me,(except deank at the very first post)
that means absolutly nobody ,thx again...:(
i thought it was some kind of helping forum but it was a mistake..

ericdMaybe you'd get a better response with an attitude adjustment - screaming that somebody help you 48 hours after your question is posed doesn't normally get people into a helpful mood. Also, try posting more information about your problem, you've essentially just said "Subs don't work on my PS3". You haven't said what format your source file is (BluRay, TS, MKV?) or what format the problem subs are (SUP, SRT, PGS?)

I suspect it's a simple matter of you not outputting to a compatible format - you can only get subs working on a PS3 by burning to a BD/MiniBD or creating an AVCHD structure. If you are streaming from your PC, you won't gets subs no matter what you do.

If this response is not satisfactory, I'm sure Doom9 will refund you in full for the cost of membership. Oh wait...

[deank]

hi deank its me again thx

well here is a sample of the bluray structure done with tsmuxer and also the meta ,i have to say that it is a 1920x1080p mkv as source,i want to make it works with ps3 or powerdvd8 ,but still no subs!! ansi charset is used with,itry cambria font buti also try with others fonts,still a mystery that nothings appears..
here is the meta of the file

MUXOPT --no-pcr-on-video-pid --new-audio-pes --blu-ray --vbr --auto-chapters=5 --vbv-len=500
V_MPEG4/ISO/AVC, "L:\movie.mkv", insertSEI, contSPS, track=1, lang=eng
A_AC3, "L:\movie.mkv", track=2, lang=eng
S_TEXT/UTF8, "L:\movie.srt",font-name="Cambria",font-size=70,font-color=0x00FFFFFF,font-charset=0,bottom-offset=70,font-border=1,text-align=center,video-width=1920,video-height=1080,fps=23.976, lang=fre


and here is a sample of the .ts iinside the bluray structure ,i mean in the stream folder ,you have the subs in atachment

http://rapidshare.com/files/195062291/try.ts.html

subs http://rapidshare.com/files/195065540/The_Searchers.srt.html

thx for helping as usual deank :cool:

Probably the first question I should have asked is - HOW do you play the output of tsMuxer?

If you try to play m2ts/ts files one by one (via XMB in PS3) - you'll never get the subtitles working. I suggest you try with mutiAVCHD and see if it gives you any errors. I downloaded your samples and will try with them in a minute.

***

I loaded your try.ts sample in multiAVCHD and (using your subtitles try.srt) it produced this:

http://multiAVCHD.deanbg.com/eric.jpg

[ericd]

Maybe you'd get a better response with an attitude adjustment - screaming that somebody help you 48 hours after your question is posed doesn't normally get people into a helpful mood. Also, try posting more information about your problem, you've essentially just said "Subs don't work on my PS3". You haven't said what format your source file is (BluRay, TS, MKV?) or what format the problem subs are (SUP, SRT, PGS?)

I suspect it's a simple matter of you not outputting to a compatible format - you can only get subs working on a PS3 by burning to a BD/MiniBD or creating an AVCHD structure. If you are streaming from your PC, you won't gets subs no matter what you do.

If this response is not satisfactory, I'm sure Doom9 will refund you in full for the cost of membership. Oh wait...

sorry but its not 48 hours its now about 3 months that i try to have an answer from anybody,only one person answered me its deank in 3 months !!!!i put several posts but never ever have answered to my questions ,put yourself at my place,waiting waiting and nothing ,that s right i finally screeam because it was amazing how everybody was talking of their problems and then find answers and me not,it was like i never wrote anything.its like i was invisible!!
and as you can see, just one upper post to yours i said that it was an mkv in 1920x1080 ,you can see the description in the last post of deank,absolutly everything is explain in this post and even there is a 1 minute post in rapidshare of the mkv!!!
so please before saying that i need an attitude adjustment ,read all the posts i already wrote ,and not only the last one !! thx

by the way my problems are resolved with the last version of tsmuxer 1824 b .and it worked in bluray format in ps3 in native resolutions..
and sorry if my english is not good i m french
thx anyway for your answer idbirch2 ,and a BIG THX to DEANK for his helping....

ericd

[odin24]

The links to the latest tsMuxeRs are down... or at least I cannot connect. Could someone possibly upload the latest version with the most recent GUI.

[Atak_Snajpera]

http://www.smlabs.net/tsmuxer_en.html

[setarip_old]

I guess the fact that the SmartLabs folks have posted v.1.8.24 at their website (not just an ftp) means it's a presumably stable release.

Unfortunately, the posted "History" does not specifically state whether modifications were made regarding processing of VC-1 files: Bug fixed: Plenty of minoir bug fixed
Bug fixed: Dolby True-HD issue on hardware players fixed
Feature: Tags for SRT subtitles support - tags for changing font, color, size, etc.; tag's syntax is similar to HTML;
Feature: United cross-platform GUI - Windsows, Linux, MacOS.

[jtheripper]

when I download 108.24 from either smlabs or VCDhelp NOD32 reports a virus. Anyone else have that happen?

[deank]

Yes it says "probably variant of Win32/Statik application" but I doubt it is anything to worry about.

[ericd]

when I download 108.24 from either smlabs or VCDhelp NOD32 reports a virus. Anyone else have that happen?


no ,there is no virus it must be an hoax or a false positive,tested with antivir and malwarebytes anti malware ;) it depends of your antivirus program