smartLabs tsMuxeR: Transport Stream muxer

[SeeMoreDigital]

Hi Nathan,

Are you configuring the PS3 to output/pass a DTS bit-stream to an external digital surround sound (DSS) amplifier?

[ch@@boom]

What version of Surcode are you using? Your log should look like this:

eac3to v2.46
command line: "P:\eac3to_2.46\eac3to.exe" "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.eac3" "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.dts" -1536
------------------------------------------------------------------------------
E-AC3, 5.1 channels, 2:23:27, 1536kbit/s, 48khz, dialnorm: -27dB
Removing dialog normalization...
Decoding with DirectShow (Nero Audio Decoder 2)...
DirectShow reports 5.1 channels, 24 bits, 48khz
Writing WAVs...
Creating file "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.R.wav"...
Creating file "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.C.wav"...
Creating file "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.L.wav"...
Creating file "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.SL.wav"...
Creating file "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.SR.wav"...
Creating file "K:\HD_TEMP\Transformers.HD-DVD\WORK\Audio.LFE.wav"...
Found Surcode DTS Encoder version 1.0.23.0.
Surcode encoding successfully started. Please wait...
Closing Surcode...
eac3to processing took 20 minutes, 43 seconds.
Surcode encoding took 1 hour, 10 minutes.
Done.

it basically looked like your log, except the versions were:
eac3to.exe = 2.25
surcode = 1.0.21

trying now with:
eac3to.exe = 2.46
surcode = 1.0.23



C:\xp\util\tcmd7\addons\media\multiplexers\eac3to>C:\xp\util\tcmd7\addons\media\multiplexers\eac3to\eac3to H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\FEA
TURE_1.EVO+H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\FEATURE_2.EVO 9: H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\audio.dts -sonic
EVO, 2 video tracks, 8 audio tracks, 32 subtitle tracks, 1:58:28
"Main Movie"
1: Joined EVO file
2: Chapters, 20 chapters with names
3: VC-1, 1080p24 /1.001 (16:9) with pulldown flags
4: VC-1, 480p30 /1.001 (3:2)
5: E-AC3, Japanese, 5.1 channels, 768kbit/s, 48khz, dialnorm: -27dB, 8ms
6: E-AC3, English, 5.1 channels, 1536kbit/s, 48khz, dialnorm: -27dB, 18ms
7: E-AC3, French, 5.1 channels, 768kbit/s, 48khz, dialnorm: -27dB, 8ms
8: E-AC3, Italian, 5.1 channels, 768kbit/s, 48khz, dialnorm: -27dB, 8ms
9: E-AC3, German, 5.1 channels, 768kbit/s, 48khz, dialnorm: -27dB, 8ms
10: E-AC3, Spanish, 5.1 channels, 768kbit/s, 48khz, dialnorm: -27dB, 8ms
11: E-AC3, English, 2.0 channels, 192kbit/s, 48khz, dialnorm: -27dB, -8ms
"Director Commentary"
12: E-AC3, 2.0 channels, 192kbit/s, 48khz, dialnorm: -27dB, -18ms
13: Subtitle, Japanese
14: Subtitle, English, "SDH"
15: Subtitle, French
16: Subtitle, Italian
17: Subtitle, German
18: Subtitle, Spanish
19: Subtitle, Dutch
20: Subtitle, Korean
21: Subtitle, Swedish
22: Subtitle, Danish
23: Subtitle, Finnish
24: Subtitle, Norwegian
25: Subtitle, Portuguese
26: Subtitle, Chinese
27: Subtitle, Japanese, "Director Commentary"
28: Subtitle, English, "Director Commentary"
29: Subtitle, French, "Director Commentary"
30: Subtitle, Italian, "Director Commentary"
31: Subtitle, German, "Director Commentary"
32: Subtitle, Spanish, "Director Commentary"
33: Subtitle, Japanese, "PiP Commentary"
34: Subtitle, English, "PiP Commentary"
35: Subtitle, French, "PiP Commentary"
36: Subtitle, Italian, "PiP Commentary"
37: Subtitle, German, "PiP Commentary"
38: Subtitle, Spanish, "PiP Commentary"
39: Subtitle, Japanese, "Forced"
40: Subtitle, English, "Forced"
41: Subtitle, French, "Forced"
42: Subtitle, Italian, "Forced"
43: Subtitle, German, "Forced"
44: Subtitle, Spanish, "Forced"
[a09] Extracting audio track number 9...
[a09] Removing dialog normalization...
[a09] The Sonic (E-)AC3 Decoder applies DRC.
[a09] Decoding with DirectShow (Sonic Audio Decoder)...
[a09] DirectShow reports 5.1 channels, 24 bits, 48khz
[a09] Applying RAW/PCM delay...
[a09] Writing WAVs...
[a09] Creating file "H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\audio.LFE.wav"...
[a09] Creating file "H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\audio.SR.wav"...
[a09] Creating file "H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\audio.L.wav"...
[a09] Creating file "H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\audio.C.wav"...
[a09] Creating file "H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\audio.SL.wav"...
[a09] Creating file "H:\hd\work\BOURNE_IDENTITY_G41\HVDVD_TS\audio.R.wav"...
Found Surcode DTS Encoder version 1.0.23.0.
Surcode encoding successfully started. Please wait...
Video track 3 contains 170424 frames.
Closing Surcode...
Video track 4 contains 212609 frames.
eac3to processing took 24 minutes, 25 seconds.
Surcode encoding took 20 minutes, 53 seconds.
Done.



**update**
seems to work now .. will let you all know tomorrow ...

[claymic]

I try many times put in one dvd-r 4.5 many episodes of lost, i fallowing the guide post here using nerovision, but dont work in ps3, work in my blu-ray player. Can anyone help me ? i dont no what more i can do. I try everything. Please help me.

[EPiPH0NE]

**update**
seems to work now .. will let you all know tomorrow ...


Awesome...now get a hold of the Nero filters and you'll be all set :)

[jeffnoone]

As a newbie to this area, I have been able to use this great tool to create BluRay output from HD-DVD's and Blu-Rays using video and AC3 tracks only, that play in a AVCHD folder on a USB drive attached to the PS3

tsMuxeR has been easy to use - thanks for this

But a couple of specific questions

How do I get the "audio delay"
I see that tsMuxeR has a setting to allow for this

Does tsMuxeR automatically adjust for the audio delay in a particular track?
If not, what tool do I use to get the delay?


Secondly with regard to digital audio formats "higher" than 5.1 AC3 or DTS, it seems that most or all of these have to be converted to 6.1 or 7.1 LPCM to preserve the additional info (at cost of larger size)

How do I convert these higher formats to allow them to be remuxed subsequently with tsMuxeR? - formats like DTS-MA 7.1, DTS-HD 7.1?

If a movie already has LPCM 7.1 format, I can use that directly - correct?

One final question, while I haven't come across a movie with branching structure yet, does the current tsMuxeR output allow for branching structure?

Hope you can help out
Jeff

[n0mag!c]

How do I get the "audio delay"
I see that tsMuxeR has a setting to allow for this
Does tsMuxeR automatically adjust for the audio delay in a particular track?
If not, what tool do I use to get the delay?
What do you mean saying "automatically"? Just use your ears as such a tool.
while I haven't come across a movie with branching structure yet, does the current tsMuxeR output allow for branching structure?
TsMuxer supports *.mpls files and appending for this task.

[n0mag!c]

I try many times put in one dvd-r 4.5 many episodes of lost, i fallowing the guide post here using nerovision, but dont work in ps3, work in my blu-ray player. Can anyone help me ? i dont no what more i can do. I try everything. Please help me.
We can't read your mind. Tell us exactly what you are doing (step by step) then we tell you exactly where you are doing wrong.

[claymic]

We can't read your mind. Tell us exactly what you are doing (step by step) then we tell you exactly where you are doing wrong.

Hi man, i am sorry, my english is very poor. I will try to explain for you. I have many files in 720p (lost, smallville, etc). I want to put them in one dvd-r (4.5 or 8.5). I fallow the guide post here, using nerovision. Works in blu-ray player, but dont work in ps3. I burn the disc with udf 2.5. When i put the disc in one blu-ray player, the player open the menu and play every episodes very well, but when i put in ps3, the ps3 show data disc. I have try to burn in udf 2.6, i have try to create a avchd and i have try to create blu-ray structure, dont work anyway. I have use dvd-r 4.5.
When i create blu-ray structure with tsmuxer for one file, works very well in ps3.
I try to join the files with mkvmerge, but the image for the second files was distorcing.
I want to put many files in one dvd-r, thats it.
I am sorry for my bad english.

[jeffnoone]

[What do you mean saying "automatically"? Just use your ears as such a tool.

Basically what I am asking here is whether in a typical Bly-Ray movie file (being processed by tsRemuxeR) there is any delay in the start of any of the audio tracks, or do they all start at time "zero"?

If there is a delay in the start of audio tracks,is there any tool to tell what what this delay is? e.g. -65msec

I agree this can be guestimated using ears, but in the past I have found that my ears often slip up here (when I used do a similar process with DVD's?)


TsMuxer supports *.mpls files and appending for this task.

thanks

[EPiPH0NE]

How do I get the "audio delay"

eac3to


How do I convert these higher formats to allow them to be remuxed subsequently with tsMuxeR? - formats like DTS-MA 7.1, DTS-HD 7.1?

eac3to source.m2ts destination.pcm

Pcm2Tsmu destination.pcm destination_2.pcm

source.m2ts + destination_2.pcm -> tsMuxeR -> final_destination.m2ts

If a movie already has LPCM 7.1 format, I can use that directly - correct?

Yes.

One final question, while I haven't come across a movie with branching structure yet, does the current tsMuxeR output allow for branching structure?

If the source BluRay is MPEG2 then you can just use tsMuxeR as stated above. If it's AVC you will need to use eac3to to properly join the segmented files.

[claymic]

Finaly. Ps3 run now my dvd-r with multiples files, menu and subtitles.First i create a blu-ray structure for my files, and the folders, like the guide post here. I create a avchd with nerovision 5, dont work for my ps3 create a blu-ray structure, then i create a .bat file (Nerovision have a bug, when save avchd in hard disc, the bat will fix that) :
ECHO
REM 02 - COPYING THE NECCESARY FILES
REM======================================================================================================



REM COPYING m2ts-Files
MOVE C:\LOST\1\BDMV\STREAM\00001.m2ts C:\LOST\MENU\AVCHD\BDMV\STREAM\00000.m2ts
MOVE C:\LOST\2\BDMV\STREAM\00001.m2ts C:\LOST\MENU\AVCHD\BDMV\STREAM\00001.m2ts
MOVE C:\LOST\3\BDMV\STREAM\00001.m2ts C:\LOST\MENU\AVCHD\BDMV\STREAM\00002.m2ts

REM COPYING clpi-FILES
MOVE C:\LOST\1\BDMV\CLIPINF\00001.clpi C:\LOST\MENU\AVCHD\BDMV\CLIPINF\00000.clpi
MOVE C:\LOST\2\BDMV\CLIPINF\00001.clpi C:\LOST\MENU\AVCHD\BDMV\CLIPINF\00001.clpi
MOVE C:\LOST\3\BDMV\CLIPINF\00001.clpi C:\LOST\MENU\AVCHD\BDMV\CLIPINF\00002.clpi

REM COPYING mpls-Files
MOVE C:\LOST\1\BDMV\PLAYLIST\00000.mpls C:\LOST\MENU\AVCHD\BDMV\PLAYLIST\00000.mpls
MOVE C:\LOST\2\BDMV\PLAYLIST\00000.mpls C:\LOST\MENU\AVCHD\BDMV\PLAYLIST\00001.mpls
MOVE C:\LOST\3\BDMV\PLAYLIST\00000.mpls C:\LOST\MENU\AVCHD\BDMV\PLAYLIST\00002.mpls

REM Rename files
rename C:\LOST\MENU\AVCHD\BDMV\INDEX.BDM index.bdmv
rename C:\LOST\MENU\AVCHD\BDMV\MOVIEOBJ.BDM MovieObject.bdmv
rename C:\lost\MENU\AVCHD\BDMV\BACKUP\INDEX.BDM index.bdmv
rename C:\lost\MENU\AVCHD\BDMV\BACKUP\MOVIEOBJ.BDM MovieObject.bdmv
rename C:\lost\MENU\AVCHD\BDMV\STREAM\00003.MTS 00003.m2ts
rename C:\lost\MENU\AVCHD\BDMV\PLAYLIST\01200.MPL 01200.mpls
rename C:\lost\MENU\AVCHD\BDMV\CLIPINF\00003.CPI 00003.clpi

xcopy /R C:\lost\MENU\AVCHD\BDMV\PLAYLIST\*.mpls C:\lost\MENU\AVCHD\BDMV\BACKUP\PLAYLIST\
xcopy /R C:\lost\MENU\AVCHD\BDMV\CLIPINF\*.clpi C:\lost\MENU\AVCHD\BDMV\BACKUP\CLIPINF\

DEL C:\lost\MENU\AVCHD\BDMV\CLIPINF\00000.CPI
DEL C:\lost\MENU\AVCHD\BDMV\CLIPINF\00001.CPI
DEL C:\lost\MENU\AVCHD\BDMV\CLIPINF\00002.CPI

DEL C:\lost\MENU\AVCHD\BDMV\PLAYLIST\00000.MPL
DEL C:\lost\MENU\AVCHD\BDMV\PLAYLIST\00001.MPL
DEL C:\lost\MENU\AVCHD\BDMV\PLAYLIST\00002.MPL

DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\CLIPINF\00000.CPI
DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\CLIPINF\00001.CPI
DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\CLIPINF\00002.CPI
DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\CLIPINF\00003.CPI

DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\PLAYLIST\00000.MPL
DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\PLAYLIST\00001.MPL
DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\PLAYLIST\00002.MPL
DEL C:\lost\MENU\AVCHD\BDMV\BACKUP\PLAYLIST\01200.MPL

DEL C:\lost\MENU\AVCHD\BDMV\STREAM\00000.MTS
DEL C:\lost\MENU\AVCHD\BDMV\STREAM\00001.MTS
DEL C:\lost\MENU\AVCHD\BDMV\STREAM\00002.MTS

So, i use hexedit for modified the files in playlist and backup/playlist. Now, i burn with nero, using Label : AVCHD and UDF 2.5. Works perfect.

[nass06]

Do you have a solution without nerovision? I don't understand, do you use tsmuxer to create blu ray? please explain me.
Sorry for my bad english.

[jmone]

Hi Nathan,

Are you configuring the PS3 to output/pass a DTS bit-stream to an external digital surround sound (DSS) amplifier?

Sorry was away for a couple of days! Yes the PS3 is configured OK. If you look at the properties of the files being played the PS3 reports that there is no audio track (as the splitter is not outputing it....)
Thanks
Nathan

[claymic]

Do you have a solution without nerovision? I don't understand, do you use tsmuxer to create blu ray? please explain me.
Sorry for my bad english.

My english is very poor too. Do you speak portuguese ? if yes i can send you a private message explain everything. I will crete a guide and post here soon.
I use tsmuxer for create a blu-ray structure for each one of the episodes. EX: for episode one use tsmuxer and save the blu-ray structure in folder C:\LOST\1. Episode 2 in folder C:\LOST\2 and episode 3 and folder C:\LOST\3. Now open nerovision and choice a AVCHD and add 3 small archives of any movie ( i insert 3 movies of 1 sec each). Now create a AVCHD and save in folder C:\LOST\MENU. Use my post above for move and delete files. You can copy my post and save like a .bat, click two times and .bat will go to all make the work automatically for you.
Sorry, my english is very poor. I will try to make a guide for this.
you can search here in this fórum, have a post to create blu-ray with nero, but does not work for ps3, but you can catch the main idea and adapt it my way to create avchd.
Sorry peaple, I really would like to help and collaborate with this fórum, but my English is limited.
when the guide to be ready i will post here.

[n0mag!c]

Finaly. Ps3 run now my dvd-r with multiples files, menu and subtitles.First i create a blu-ray structure for my files, and the folders, like the guide post here. I create a avchd with nerovision 5, dont work for my ps3
So that was it. You should create "Blu-Ray" disk in nero vision, not "AVCHD" disk.

[jmone]

Sorry for the nOOb Q on my quest to covert my HD-DVD's to M2 files! Does tsMuxeR support reading Chapters & Subs from EVO files (HD-DVD) for the creation in the remuxing to M2?
Thanks
Nathan

[n0mag!c]

Sorry for the nOOb Q on my quest to covert my HD-DVD's to M2 files! Does tsMuxeR support reading Chapters & Subs from EVO files (HD-DVD) for the creation in the remuxing to M2?
No, it doesn't support none of above.

[carrot691]

I have MPTS (or SPTS in 38.8mbits) which I want to remux into 19mbits Transport stream. Seems like tsmuxer is the best to do the job. However I'm having little problem because I want the PCR needs to be on the Video PID and it seems like it's creating continuity errors when I use the option "--pcr-on-video-pid". Usually you add the PCR in the Adaptation header and not on a separate PID packet (wasting a few bytes when you do). Anyway, it's ok to be a seperate MPEG-2 packet but continuity counter needs to be altered in the original video PID. Seems like something quite easy to fix.

Example :
ts warning: discontinuity received 0x0 instead of 0x0 (pid=4113)
ts warning: discontinuity received 0xe instead of 0xe (pid=4113)
ts warning: discontinuity received 0x7 instead of 0x7 (pid=4113)

Also, is it possible to specify the PID I want in the output Transport stream?

Thanks.

[jagaskywalker]

....Now create a AVCHD and save in folder C:\LOST\MENU. Use my post above for move and delete files. You can copy my post and save like a .bat, click two times and .bat will go to all make the work automatically for you.....

I believe that what you are reporting as a bug in Nero is not exactly like that. The structure that Nero creates on the hard disk is compliant with the "AVCHD in FAT32 hard disk specification".

If you try to play those files from a USB FAT32 formatted hard disk (putting everything under the AVCHD folder in the root directory) it most likely will play, with menu, etc.... (and you don't need to burn a DVD)

Your script is replicating other existing scripts that are used to change filenames to/from tsmuxer / FAT32 devices

Good work nevertheless....

J

[nass06]

Ok, thank you, no i don't speak portuguese, i speak french.

[titof]

Hi

I muxed a M2TS file (from camcorder canon HG10) into a TS file with TSmuxerGUI

When I analyse these M2TS file with the MTS4EA from Tecktronix, everything is OK

When I open the TS file, appear this alert message :

"An Access Unit Delimiter NALU was found in an unexpected place. Access delimiter NAL units must occur at the beginning of an access unit."

I think that is because M2TS is a 192 octet packet file and the TS is a 188 octet file. And when you change the length of the packets, the beginning of the NAL Unit is not starting at the beginning of the new packets...

It's not an Error, just an Alert. It's just not totally complinent.
It's possible to open the file.

Thanks for this usefull soft.

[hkitty]

I would like to start by saying what a nice program tsMuxer is. I am using it to join (append) mutliple mts files from my sony camcorder. The program does it fast and nicely. However, I am noticing the audio in the joined file appears to be out of sync. It appears to have a slight delay in the audio. Does anyone has suggestion on how I can fix that? Thanks

[EPiPH0NE]

I would like to start by saying what a nice program tsMuxer is. I am using it to join (append) mutliple mts files from my sony camcorder. The program does it fast and nicely. However, I am noticing the audio in the joined file appears to be out of sync. It appears to have a slight delay in the audio. Does anyone has suggestion on how I can fix that? Thanks

I am guessing you are using an AVCHD camcorder? Try using eac3to to join the files instead and see if that helps.

[hkitty]

I am guessing you are using an AVCHD camcorder? Try using eac3to to join the files instead and see if that helps.

Yes, I am using an AVCHD camcorder. Will eac3to join the mts files as quickly as tsMuxer? This is important to me as I have an old computer.

[zybex]

to: roman76r

Привет, Роман.

Извини, что по русски :-)

У меня проблема с перегонкой из MKV в TS в кодеке VC-1 таких фильмов (выложил фрагменты, прошу доработать TSMuxer):

http://rapidshare.com/files/120836537/HDTV-1080p_VC-1_Constantine.mkv (http://rapidshare.com/files/120836537/HDTV-1080p_VC-1_Constantine.mkv.html) (30Mb)
http://rapidshare.com/files/120839997/HDTV-1080p_VC-1_Matrix-1.mkv (http://rapidshare.com/files/120839997/HDTV-1080p_VC-1_Matrix-1.mkv.html) (30Mb)
http://rapidshare.com/files/120844210/HDTV-1080p_VC-1_Troy.mkv (http://rapidshare.com/files/120844210/HDTV-1080p_VC-1_Troy.mkv.html) (30Mb)
http://rapidshare.com/files/120847103/HDTV-1080p_VC-1_Waterworld.mkv (http://rapidshare.com/files/120847103/HDTV-1080p_VC-1_Waterworld.mkv.html) (30Mb)

Указанные фильмы проигрываются на PC через Haali + Libavcodec

В MKV тип видео прописан как V_VC1, именно с такими MKV файлами проблема с TSMuxer.
Если же в MKV тип видео прописан как WVC1, то нормально воспринимается через TSMuxer.
Просмотреть как прописан поток (V_VC1 или WVC1), можно через MKVMerge GUI.

Демуксировать поток VC1 из указанных семплов можно через AVI-Mux GUI.
После демуксинга он также не воспринимается ни TSMuxer, ни Elecard XMuxer Pro.

И таких файлов MKV VC1, в которых поток прописан как V_VC1 немало, я выложил фрагменты только некоторых фильмов, их гораздо больше.
Прошу помощи, спасибо.

[jangai]

Hello

After a subtitles ANSI srt to SUP conversion with SUPread last release and muxing to 'BluRay Disc' with tsMuxeR, my PS3 "see" a subtitles stream but when activated, subtitles stay invisible... Audio and video are OK...

Are there special parameters for SRT to SUP conversion into SUPread ?

To help, here is the command metafile :

MUXOPT --no-pcr-on-video-pid --new-audio-pes --blu-ray --vbr --auto-chapters=5 --vbv-len=500
V_MPEG4/ISO/AVC, "C:\Documents and Settings\jangai\Mes documents\Mes videos\A muxer\U-571\U571resized.mkv", insertSEI, contSPS, track=1, lang=eng
A_AC3, "C:\Documents and Settings\jangai\Mes documents\Mes videos\A muxer\U-571\U-571 Audio_fr.ac3", lang=fre
A_DTS, "C:\Documents and Settings\jangai\Mes documents\Mes videos\A muxer\U-571\U-571 Audio_en.dts", lang=eng
S_HDMV/PGS, "C:\Documents and Settings\jangai\Mes documents\Mes videos\A muxer\U-571\U-571_ANSI sstitres_fr.sup", fps=23.9762, lang=fre

Thanks in advance :rolleyes:

[ultratoto14]

Just tried something, I just remux a movie and forget to patch level to 4.1. My m2ts file play fine in PS3 even with a level 5.1. I will try other movies that do not play before.

Stay tuned.

[rica]

to: roman76r

Привет, Роман.

Извини, что по русски :-)

У меня проблема с перегонкой из MKV в TS в кодеке VC-1 таких фильмов (выложил фрагменты, прошу доработать TSMuxer):

http://rapidshare.com/files/120836537/HDTV-1080p_VC-1_Constantine.mkv (http://rapidshare.com/files/120836537/HDTV-1080p_VC-1_Constantine.mkv.html) (30Mb)
http://rapidshare.com/files/120839997/HDTV-1080p_VC-1_Matrix-1.mkv (http://rapidshare.com/files/120839997/HDTV-1080p_VC-1_Matrix-1.mkv.html) (30Mb)
http://rapidshare.com/files/120844210/HDTV-1080p_VC-1_Troy.mkv (http://rapidshare.com/files/120844210/HDTV-1080p_VC-1_Troy.mkv.html) (30Mb)
http://rapidshare.com/files/120847103/HDTV-1080p_VC-1_Waterworld.mkv (http://rapidshare.com/files/120847103/HDTV-1080p_VC-1_Waterworld.mkv.html) (30Mb)

Указанные фильмы проигрываются на PC через Haali + Libavcodec

В MKV тип видео прописан как V_VC1, именно с такими MKV файлами проблема с TSMuxer.
Если же в MKV тип видео прописан как WVC1, то нормально воспринимается через TSMuxer.
Просмотреть как прописан поток (V_VC1 или WVC1), можно через MKVMerge GUI.

Демуксировать поток VC1 из указанных семплов можно через AVI-Mux GUI.
После демуксинга он также не воспринимается ни TSMuxer, ни Elecard XMuxer Pro.

И таких файлов MKV VC1, в которых поток прописан как V_VC1 немало, я выложил фрагменты только некоторых фильмов, их гораздо больше.
Прошу помощи, спасибо.

Interesting ???
Have you ever thought what if we all post here in our mother tongues?
Why not to try PM?

[ultratoto14]

This file didn't work before, I'm with 2.35 firmware on the ps3, just remux audio and video without patching level to m2ts via TSMuxer. FIle plays just fine now.


[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 1280 x 720
Frame aspect ratio: 16:9 = 1.777777
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 16:9 = 1.777777
Framerate: 23.975986 fps

[ Audio track ]

Codec ID: A_AC3
Channels (container): 6
Sample rate: 48000 Hz
Mode: 3 front, 2 rear, 1 LFE

[ About H.264 encoding ]

User data: x264
User data: core 56 svn-667C
User data: H.264/MPEG-4 AVC codec
User data: Copyleft 2005
User data: http://www.videolan.org/x264.html
User data: cabac=1
User data: ref=8
User data: deblock=1:-3:-3
User data: analyse=0x3:0x133
User data: me=umh
User data: subme=6
User data: brdo=1
User data: mixed_ref=1
User data: me_range=16
User data: chroma_me=1
User data: trellis=1
User data: 8x8dct=1
User data: cqm=2
User data: deadzone=21,11
User data: chroma_qp_offset=0
User data: threads=3
User data: nr=0
User data: decimate=0
User data: mbaff=0
User data: bframes=3
User data: b_pyramid=1
User data: b_adapt=1
User data: b_bias=0
User data: direct=3
User data: wpredb=1
User data: bime=1
User data: keyint=250
User data: keyint_min=25
User data: scenecut=40(pre)
User data: rc=2pass
User data: bitrate=5426
User data: ratetol=1.0
User data: rceq='blurCplx^(1-qComp)'
User data: qcomp=0.60
User data: qpmin=10
User data: qpmax=51
User data: qpstep=4
User data: cplxblur=20.0
User data: qblur=0.5
User data: ip_ratio=1.40
User data: pb_ratio=1.30
User data: aq=1:0.3:15.0
SPS id: 0
Profile: High@L5.1
Num ref frames: 11
Chroma format idc: YUV 4:2:0
PPS id: 0 (SPS: 0)
Entropy coding type: CABAC
Weighted prediction: No
Weighted bipred idc: B slices - implicit weighted prediction
8x8dct: Yes

[mezzanine]

Guys, i'm muxing to M2TS container with tsmuxer and streaming using wmp11 to my ps3. Everything works if i mux small files (e.g. 1GB maybe 2GB) but when i mux large files (like 4-6-8GB) although i can see them from the ps3 they play for a couple of seconds and then stop. Clicking information from ps3 shows that the files are 700K-800K.
Got any ideas? should i use another server or something?
cheers

[Glorioso]

Guys, i'm muxing to M2TS container with tsmuxer and streaming using wmp11 to my ps3. Everything works if i mux small files (e.g. 1GB maybe 2GB) but when i mux large files (like 4-6-8GB) although i can see them from the ps3 they play for a couple of seconds and then stop. Clicking information from ps3 shows that the files are 700K-800K.
Got any ideas? should i use another server or something?
cheers

Try TVersity, i've streamed 8gb+ files with no problem.

[mezzanine]

Try TVersity, i've streamed 8gb+ files with no problem.

Yes i installed tversity last night and i can stream without transcoding most of the m2ts HD files.
But there is another problem, when i try to go to a certain point of a movie it freezes. This happens with large files only. In 1gb episode HD files i can go to any point and it begins playback after 4-5 seconds.

[claymic]

So that was it. You should create "Blu-Ray" disk in nero vision, not "AVCHD" disk.

No, i have to create a avchd disc whith nerovision and replace the files with the blu-ray structure create by tsmuxer.

[claymic]

I believe that what you are reporting as a bug in Nero is not exactly like that. The structure that Nero creates on the hard disk is compliant with the "AVCHD in FAT32 hard disk specification".

If you try to play those files from a USB FAT32 formatted hard disk (putting everything under the AVCHD folder in the root directory) it most likely will play, with menu, etc.... (and you don't need to burn a DVD)

Your script is replicating other existing scripts that are used to change filenames to/from tsmuxer / FAT32 devices

Good work nevertheless....

J

Ok, but i dont test with FAT32, and i dont find any script in the net about that. I create this for my files, for burn in a dvd-r 4.5. I try with script post here, dont work in ps3. My intention is play multiple files with menu and subtitles, burn in dvd-r. I dont want play in a FAT32 devices., so, works now and i am very happy.

[Glorioso]

Yes i installed tversity last night and i can stream without transcoding most of the m2ts HD files.
But there is another problem, when i try to go to a certain point of a movie it freezes. This happens with large files only. In 1gb episode HD files i can go to any point and it begins playback after 4-5 seconds.

Same problem here...

[Lacix]

This file didn't work before, I'm with 2.35 firmware on the ps3, just remux audio and video without patching level to m2ts via TSMuxer. FIle plays just fine now.


It seems to me too that level 5.1 works now on the PS3.

[curtis-r]

I was previously using TsRemux to slim-down .m2ts blu-ray movies to then play through my TViX M-6500. If I didn't uncheck "bypass audio alignment", DTS-HD audio tracks skip every few seconds.

Now that I'm finding some Blu-Ray movies segmented, I found the nearly perfect solution in Ea2to and tsMuxeR to create my final .m2ts movies.

My problem: No "bypass audio alignment" in tsMuxeR, thus I'm having my DTS-HD sound issue.

Is there a comparable "bypass..." function in tsMuxeR or some other solution?

[ultratoto14]

It seems to me too that level 5.1 works now on the PS3.

Tried most of the files who needed a reenconde to work with PS3. All the files i tested are now Ok on PS3 !!

It's a great news.

[Kakan]

Hey claymic can you plz teach me how to put in many movies on 1 disc so I can play them in my bluray player ???

I Have read all paged but I don´t really got it :(

And I also wounder if its posiebol to put new subs to a bluray movie ??? Will they be in sync and stuff like that.

I need 1,2,3 step guide :)

//Kakan

[Underground78]

It seems that aac tracks in mkv files are not detected by tsMuxeR (some people have reported this and I can confirm this too) but is this a bug or a normal thing (knowing that when demuxed these tracks are usable in tsMuxeR) ? I can't find a clear answer ...

[Butterfly666]

Tried most of the files who needed a reenconde to work with PS3. All the files i tested are now Ok on PS3 !!

It's a great news.

5.1 level works with 720p movies but not 5.1 -> 1080p movies!

[Joniii]

I just installed latest version of Cyberlink PowerDVD 8 Ultra. I noticed that I get no audio from any of my .m2ts files with DTS tracks. I then tried to remux one DVD .vob to .m2ts. Original vob plays fine and PDVD detects DTS track but with .m2ts it thinks there is no audio tracks. Something wrong with the tsmuxer maybe?

[nefilim]

Any news on an updated Linux version ? Would be great if it could be updated with all the fixes the Windows version has.

[n0mag!c]

No, i have to create a avchd disc whith nerovision and replace the files with the blu-ray structure create by tsmuxer.
You MUST create "BLU-RAY" disk in NeroVision if you wish to burn result to DVD-R(W) / BD-R(E)
You MUST create "AVCHD" disk in NeroVision if you wish to play result from USB (flash)disks.

[Turtleggjp]

Hi,
Very good tool, but I need a feature. Is it possible, in the next release, to open a MTS file ?
It's a file from a canon HD camcorder, coded in AVCHD at 15Mb

If you need you can download a exemple (4794 Ko) :

http://dl.free.fr/lpsM0iXOw/00015.MTS

Thanks a lot...
Titof

I have this problem too. I just rename my files to .m2ts and it works just fine. I think it is just a bug in the way it determines whether the file is a 188-byte packet file or a 192-byte packet file (it thinks your .mts is 188 when it is 192). This would be nice to get fixed though, but the work around is pretty easy:

rename *.mts *.m2ts

I would like to start by saying what a nice program tsMuxer is. I am using it to join (append) mutliple mts files from my sony camcorder. The program does it fast and nicely. However, I am noticing the audio in the joined file appears to be out of sync. It appears to have a slight delay in the audio. Does anyone has suggestion on how I can fix that? Thanks

This is another feature I would really like to see added to tsMuxeR. I made up an Excel spreadsheet to help me overcome this problem with my Canon HF100. The problem is that the audio is usually slightly longer than the video since the audio is made up of 32ms AC3 frames. What needs to be done is the total number of video frames and audio frames needs to be counted as it is going along. When a join point comes, if the audio is now more than 16 ms longer that the video, the last frame should simply be thrown away. This will give it a slight negative offset, but that will soon be corrected once the next clip or so has ended. This is what my Excel spreadsheet does. It is complicated, and uses a few other tools to do everything:

DGAVCIndex to count video frames
AC3 Cutter to count audio frames
tsMuxeR to join all clips with audio (out of sync)
AC3 Cutter again to remove audio frames where necessary.
tsMuxeR again to join all clips and merge with corrected audio

However, it DOES work. I'm sure that if tsMuxeR is able to determine the number of video and audio frames going by, this type of merge should be easy enough to add to it. I know I'm not the only one with one of these AVCHD camcorders, so it would be a valuable addition indeed. If Roman is still watching this thread, I'd be glad to assist him in adding this feature.

Matt

[ibius]

Hi, one quick question: If I just want to strip some audio and subtitle tracks, simply remux the original Blu-ray .m2ts file, does it matter if I use 'M2TS muxing' or 'Create Blu-ray disk' as the Output option?
Would both resulting streams be in any way different from one another AND more importantly from the original one?
Does 'M2TS muxing' mean that a .TS file will be created, whereas 'Create Blu-ray disk' will create not only Blu-ray folders but also a Blu-ray compliant .m2ts file?
Or is the only difference the BD structure?

And could someone explain me the difference between .ts and .m2ts streams?

Would really appreciate your input on this one,
thx in advance.

[n0mag!c]

Hi, one quick question
BD structure is not only M2TS file itself. So if you wish to burn AVCHD/BDMV disk you must use 'Create Blu-ray disk' option.
If you wish to play your movie as file then you must use ".ts" output, 'cause it's smaller then ".m2ts" file, 'cause its packets have smaller size.

[jagaskywalker]

I know I'm not the only one with one of these AVCHD camcorders, so it would be a valuable addition indeed.
Matt

I would be very happy to have this available. I also have an AVCHD Sony camcorder...

On another issue, is there any new info about the "jumps" we see when splitting the m2ts file in a FAT32 device (playing on PS3) ? Is there a way to solve it ?

THX

J

[Blinky7]

I jsut found out about htis tool and reading hte first page I saw "SRT subtitles" in the streams to be muxed and was so excited!

Is it possible with this tool to add Greek SRT subs to my blu-rays keeping ht estructure intact and avoiding re-encoding of video/audio ?

[winnydows]

5.1 level works with 720p movies but not 5.1 -> 1080p movies!
It`s not a rule. Some 720p work, some don`t. Same for 1080p. Everything depend on luck in this case.