MeGUI: General Questions and Troubleshooting Thread

[misagh72]

how to add folder bluray to megui ?

[Shevek]

how to add folder bluray to megui ?

Use Tools->HD Streams Extractor

[Ruriko]

Does anyone know a tool that can batch add videos? I used to use MeGUI Batch Expansion https://sourceforge.net/projects/meguibatchjobex/ but it doesn't work anymore :(

[Zathor]

Have you already tried the oneclick tool in MeGUI?

[Zathor]

Problem :/


---[Information] [27/06/2013 20:02:05] Input #0, avisynth, from 'K:\Temp\Temp Megui\VTS_01_PGC_01_1.avs':
---[Information] [27/06/2013 20:02:05] Duration: 00:00:10.00, start: 0.000000, bitrate: 0 kb/s
---[Information] [27/06/2013 20:02:05] Stream #0:0: Video: rawvideo, bgra, 832x32, 20447 kb/s, 24 fps, 24 tbr, 24 tbn, 24 tbc
---[Error] [27/06/2013 20:02:06] [ffvhuff @ 020def80] Error: RGB is incompatible with median predictor


Try adding ConvertToYV12() in your script.

[luke83]

Try adding ConvertToYV12() in your script.

it doesn't work. Same error.

I have put it before and after Chromashift(C=2) but nothing happened

[magsoud]

How to Change Video fps 25.000 to 23.976 in MeGUI ?

[LigH]

Standard conversion is a complex topic. There are simple solutions (e.g. ConvertFPS or ResampleAudio/TimeStretch) with ugly results (much quality loss for either video or audio) or very elaborate solutions with still no guarantee for optimal results.

The best advice is: Avoid it. Use only correct sources. If you insist in mixing two different sources, RTFM.

[Ruriko]

I am having problems with the one click encoder. I selected a folder and then I press yes to process all files and once that is done I pressed the Go button and nothing happens after that. The go button becomes greyed out. It works if I do single videos but I can't do folders. What is wrong?

[Zathor]

Do you have the option "close after Go!" disabled?

It should behave in that way: As soon as you select a folder the Go button is disabled. You will be asked if all files should be processed. If yes you get a box asking for the leading name and afterwards the job will be queued and the Go button will be enabled again.

[luke83]

Problem :/
13581


Try adding ConvertToYV12() in your script.

it doesn't work. Same error.

I have put it before and after Chromashift(C=2) but nothing happened

updated to version 2357: always same error

[Ruriko]

Do you have the option "close after Go!" disabled?

It should behave in that way: As soon as you select a folder the Go button is disabled. You will be asked if all files should be processed. If yes you get a box asking for the leading name and afterwards the job will be queued and the Go button will be enabled again.

I found the problem it doesn't want to output the file in mp4 format but it ok with mkv format. If I manually create the job to output it in mp4 it will work but it won't work with one click encoder

[Zathor]

More details please - e.g. the log and the information about your source files. Also it cannot harm when you share your OneClick profile ("File\export presets", select the OneClick profile).

updated to version 2357: always same error
Add info() as last command in your avs file and have a look at the preview. Which colorspace is shown? Also you can play with the ffmpeg command line and find one which works for you.

[AMiR9!WV]

hi
how can i add "hardsub" subtitle on the video

[Shevek]

hi
how can i add "hardsub" subtitle on the video

In the AVS Script Creator window, select the Filters tab then at the bottom there is a Subtitles box, click the browse button (marked ...) and select your subtitle file.

SRT, ASS, SSA and IDX/SUB formats are acceptable.

[AMiR9!WV]

In the AVS Script Creator window, select the Filters tab then at the bottom there is a Subtitles box, click the browse button (marked ...) and select your subtitle file.

SRT, ASS, SSA and IDX/SUB formats are acceptable.

big tnx for helping me
you mean this ?
but this is not available for me
http://uploadtak.com/images/y2154_hst.png


and i add my file , but steel st not avalibale

http://uploadtak.com/images/w614_onntd.png

[Shevek]

and i add my file , but steel st not avalibale

Ah, I have no idea how it works with the one-click encoder, I always do it manually when I want hardsubs.

[AMiR9!WV]

Ah, I have no idea how it works with the one-click encoder, I always do it manually when I want hardsubs.

so manually , where you add your file and do your setting ?

[Shevek]

so manually , where you add your file and do your setting ?

Use the File Indexer to demux audio and create the Index

Load the index file into the AVS Script Creater - the subs button will now be enabled

[Sm3n]

Hi everyone,

I'm asking in megui thread but it concerns MeGUI and Simple Launcher.
I can no longer encode x264 files using the x64 version. Everytime I have an avisynth error. I tried to use both avisynth 2.5.8., 2.6 x86 and x64,. No succes. Even use the x64 version of x264 with avisynth x86 (in megui x86), crash and error too.
But if I'm using x264 x86 there is no crash. I don't know what's going on. These errors appear only for some version of x264.
I'm restricted to use x86 version of x264. I'm guessing the problem is definitly x264_64 but not avisynth.
What do you think?

I'm running on Win 7 x64, i7 intel 3770k, 16 BG RAM.

Regards.

ps: Forgive my english.

[Ruriko]

I have set the default priority to Normal but the one click encoder always set it to Low. Why does it do that?

[hello_hello]

In the x264 encoder setup there's an option to load a qp file for forcing keyframes at chapter points. It appears to also allow you to load text chapter files (and maybe xml but I haven't tried it). Would it be safe to assume loading text chapter files works the same way as qp files?

Thanks.

[Sm3n]

Hi everyone,

I'm asking in megui thread but it concerns MeGUI and Simple Launcher.
I can no longer encode x264 files using the x64 version. Everytime I have an avisynth error. I tried to use both avisynth 2.5.8., 2.6 x86 and x64,. No succes. Even use the x64 version of x264 with avisynth x86 (in megui x86), crash and error too.
But if I'm using x264 x86 there is no crash. I don't know what's going on. These errors appear only for some version of x264.
I'm restricted to use x86 version of x264. I'm guessing the problem is definitly x264_64 but not avisynth.
What do you think?

I'm running on Win 7 x64, i7 intel 3770k, 16 BG RAM.

Regards.

ps: Forgive my english.


Thx to me. It was due to a bad OC of my CPU.

[Zathor]

I have set the default priority to Normal but the one click encoder always set it to Low. Why does it do that?

Just tested it and it works as designed. If "normal" is specified in the settings it will use that for new workers. But as long as no new worker is created (MeGUI start, new (temporary) worker) the current priority will also be used for new jobs.

[Ruriko]

For some reason videos that have been encoded using the One Click Encoder are larger than the ones that are manually created. Is there a setting that I'm missing in One Click Encoder that is making the file bigger?

[Zathor]

Please post the log of both encodings. If you use the same x264 preset the result must be the same.

[Ruriko]

I found the problem it's not encoding the audio properly cause it's not using the correct profile. The one click encoder won't use the audio profile that I set to
Manual Log
General
Unique ID : 218149195579207065269579331147073515505 (0xA41E01BE5D96BCB49829B466EE56EFF1)
Complete name : C:\Users\Administrator\Downloads\Sasami@Ganbaranai [TV-720p] [Commie]\[Commie] Sasami@Ganbaranai - 01v2 [A11899AA]-muxed.mkv
Format : Matroska
Format version : Version 2
File size : 64.3 MiB
Duration : 24mn 9s
Overall bit rate : 372 Kbps
Encoded date : UTC 2013-07-17 14:59:39
Writing application : mkvmerge v6.2.0 ('Promised Land') built on Apr 28 2013 12:22:01
Writing library : libebml v1.3.0 + libmatroska v1.4.0

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 8 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 24mn 9s
Width : 704 pixels
Height : 400 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 133 r2334 a3ac64b
Encoding settings : cabac=1 / ref=8 / deblock=1:1:1 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=0.40:0.00 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=5 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=259 / keyint_min=38 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=crf / mbtree=1 / crf=24.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:0.60
Default : Yes
Forced : No

Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : HE-AAC / LC
Codec ID : A_AAC
Duration : 24mn 9s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz / 24.0 KHz
Compression mode : Lossy
Delay relative to video : 31ms
Default : Yes
Forced : No



One Clicker Log
General
Unique ID : 218536466991046200078507134072243022973 (0xA46897B2CA2C1BC7B26F8484E902EC7D)
Complete name : C:\Users\Administrator\Downloads\Sasami@Ganbaranai [TV-720p] [Commie]\sas[Commie] Sasami@Ganbaranai - 01v2 [A11899AA].mkv
Format : Matroska
Format version : Version 2
File size : 88.0 MiB
Duration : 24mn 9s
Overall bit rate : 509 Kbps
Encoded date : UTC 2013-07-17 08:03:32
Writing application : mkvmerge v6.2.0 ('Promised Land') built on Apr 28 2013 12:22:01
Writing library : libebml v1.3.0 + libmatroska v1.4.0

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 8 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 24mn 9s
Width : 704 pixels
Height : 400 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 133 r2334 a3ac64b
Encoding settings : cabac=1 / ref=8 / deblock=1:1:1 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=0.40:0.00 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=5 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=259 / keyint_min=38 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=crf / mbtree=1 / crf=24.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:0.60
Default : Yes
Forced : No

Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : A_AAC
Duration : 24mn 9s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Language : Japanese
Default : Yes
Forced : No

Text
ID : 3
Format : ASS
Codec ID : S_TEXT/ASS
Codec ID/Info : Advanced Sub Station Alpha
Compression mode : Lossless
Language : English
Default : Yes
Forced : No

Menu
00:00:00.033 : en:Intro
00:03:13.960 : en:OP
00:04:43.884 : en:Part A
00:09:58.865 : en:Part B
00:22:09.800 : en:ED
00:23:39.852 : en:Preview

[Guest]

Complete name : C:\Users\Administrator\Downloads\Sasami@Ganbaranai [TV-720p] [Commie]\sas[Commie] Sasami@Ganbaranai - 01v2 [A11899AA].mkv Discussion of torrent downloads is not allowed here.

@all

No help is to be given with this issue.

[luke83]

Some days ago, one of the users said me to add converttoyv12() but it didn't work. The problem has to be an other thing becouse the colorspace is already YV12 as you can see. I don't understand that error :(

http://s21.postimg.org/4eoc29ib7/Immagine.jpg (http://postimg.org/image/4eoc29ib7/)

The main sentence in this attachment
---[Error] [21/07/2013 00:06:38] [ffvhuff @ 02f34040] Error: RGB is incompatible with median predictor

13614

[Guest]

@luke83

Crossposting not allowed per forum rule 8. Please read and follow our forum rules.

[Kurtnoise]

Looks like a feature that is not yet supported with the current version...The pred switch in the command line should be tweaked according to the output colorspace.

[LigH]

A predictor is a function which "makes an educated guess" about the color of pixels next to or between other already known pixels, and then compresses only the difference from the guess. A good predictor will guess well, therefore there are many only very small error values to be compresses, which compresses better than the original color values without prediction. This is a specific feature of many lossless codecs, like e.g. the Huffyuv codec.

Some implementations of prediction functions may expect that a specific color space is available, and may not be implemented to work in other colorspaces.

[Zathor]

Some days ago, one of the users said me to add converttoyv12() but it didn't work. The problem has to be an other thing becouse the colorspace is already YV12 as you can see. I don't understand that error :(

Sorry, I cannot reproduce that at all. When I use DGDecode in a plain AVS script and AviSynth 2.5.8 I get:

---[Information] [22.07.2013 18:07:50] Stream #0:0: Video: rawvideo (YV12 / 0x32315659), yuv420p, 720x526, 113616 kb/s, 25 fps, 25 tbr, 25 tbn, 25 tbc

You get:
---[Information] [21/07/2013 00:06:38] Stream #0:0: Video: rawvideo, bgra, 832x32, 20447 kb/s, 24 fps, 24 tbr, 24 tbn, 24 tbc

Also your resolution 832x32 seems to be very strange.

Please try a plain AVS script (only DGDecode) and not the MT version of AviSynth to find where the problem may be.

[luke83]

however the preview works good. The error happens just during the queue only o_O

[Zathor]

This is not a (direct) MeGUI problem. You can try it when you execute the ffmpeg command line outside of MeGUI in a cmd. It is either the script, AviSynth, your source files (unlikely), ffmpeg (you can try older/newer builds) or the ffmpeg commands used (unlikely because of the output).

[luke83]

This is not a (direct) MeGUI problem. You can try it when you execute the ffmpeg command line outside of MeGUI in a cmd. It is either the script, AviSynth, your source files (unlikely), ffmpeg (you can try older/newer builds) or the ffmpeg commands used (unlikely because of the output).

1) the problem comes only with pre-rendering job
2) the script works with this
SetMTMode(5,0)
Import("K:\Documents and Settings\Luca\Documenti\Software\Video

Editing\MeGUI_0.3.5\tools\avisynth_plugin\AutoPath.avs")
MyLoadPlugin("Anime\SSmoother\RemoveGrain 1.0b\RemoveGrainSSE3.dll")
# MyLoadPlugin("Anime\Sharpener\aWarpSharp.dll")
MyLoadPlugin("Anime\Dehalo\fft3dfilter211\FFT3DFilter.dll")
MyLoadPlugin("Anime\Anti-aliasing\UnFilter.dll")
MyLoadPlugin("Anime\Anti-aliasing\SangNom.dll")
MyLoadPlugin("Anime\Line Darkener\Toon-v1.0-lite.dll")
MyLoadPlugin("Decomb.dll")
MyImport("Anime\Anti-aliasing\AAA.avs")
LoadPlugin("K:\Documents and Settings\Luca\Documenti\Software\Video

Editing\MeGUI_0.3.5\tools\dgindex\DGDecode.dll")
DGDecode_mpeg2source("K:\Temp\Temp Megui\tokyo.d2v")
SetMTMode(2,2)
# Deinterlacer
AssumeTFF().Telecide(guide=1).Decimate(mode=1,threshold=2.0)
# Spatial Denoiser
RemoveGrain(2).RemoveGrain(2)
# Cropper
# crop(14, 4, -8, -2)
# Resizer
# LanczosResize(698,522) # Lanczos (Sharp)
# Dehalo
# fft3dfilter(bt=-1, plane=0, dehalo=1.0, hr=2.0, ht=50, svr=0,

sharpen=1.0)
# Sharpener
# aWarpSharp(depth=30)
# Line darkner
# ToonLite()
# Anti-aliasing
# AAA()

If i use crop or resize, it gives error, but only with pre-rendering :/
The problem is ffhyuvv
Any ideas?

EDIT:
I'VE GOT IT!!!!The problem comes just with mod 2. If i use mod 4 it works... but I don't know why -_-'

[luke83]

Using mod4+ previouse error has been "solved". However a different problem has arrived -.-

[Error] Log
-[Information] Versions
--[Information] [30/07/2013 12:27:01] MeGUI: 2370
--[Information] [30/07/2013 12:27:01] Operating System: Windows 7 x86 SP1 (6.1.65536.7601)
--[Information] [30/07/2013 12:27:01] .Net Framework: 4.0 (4.0.30319)
--[Information] [30/07/2013 12:27:01] AviSynth: 2.6.0.3 (09/03/2013 09:28:48)
--[Information] [30/07/2013 12:27:01] AvisynthWrapper: 02/01/2009 20:34:04
--[Information] [30/07/2013 12:27:02] Haali Matroska Splitter: 1.11.96.14 (03/03/2011 11:40:46)
--[Information] [30/07/2013 12:27:02] Haali DSS2: 03/03/2011 11:37:50
--[Information] [30/07/2013 12:27:02] ICSharpCode.SharpZipLib: 0.85.5.452 (07/08/2008 20:31:12)
--[Information] [30/07/2013 12:27:02] LinqBridge: 1.0.0.0 (28/05/2009 01:24:34)
--[Information] [30/07/2013 12:27:02] MediaInfo: 0.7.64.0 (05/07/2013 14:32:39)
--[Information] [30/07/2013 12:27:02] MediaInfoWrapper: 0.7.61.0 (06/01/2013 14:47:15)
--[Information] [30/07/2013 12:27:02] MessageBoxExLib: 1.0.2218.28317 (19/12/2008 20:53:04)
--[Information] [30/07/2013 12:27:02] SevenZipSharp: 0.64.3890.29348 (02/01/2011 10:59:32)
--[Information] [30/07/2013 12:27:02] 7z: 9.20 (18/11/2010 16:27:34)
-[Information] Update detection
--[Information] [30/07/2013 12:27:02] Automatic update is disabled
-[Error] Log for job4 (video, tokyo.avs -> hfyu_tokyo.avi)
--[Information] [30/07/2013 12:27:05] Started handling job
--[Information] [30/07/2013 12:27:05] Preprocessing
---[Information] Bitrate calculation for video
----[Information] [30/07/2013 12:27:08] Desired size after subtracting audio: 764257 KBs
----[Information] [30/07/2013 12:27:08] Calculated desired bitrate: 1109 kbit/s
--[Information] [30/07/2013 12:27:08] Avisynth input script
---[NoImage] SetMTMode(5,0)
---[NoImage] Import("K:\Documents and Settings\Luca\Documenti\Software\Video Editing\MeGUI_0.3.5\tools\avisynth_plugin\AutoPath.avs")
---[NoImage] MyLoadPlugin("Anime\SSmoother\RemoveGrain 1.0b\RemoveGrainSSE3.dll")
---[NoImage] MyLoadPlugin("Anime\Sharpener\aWarpSharp2\aWarpSharp2.dll")
---[NoImage] MyLoadPlugin("Anime\Dehalo\fft3dfilter211\FFT3DFilter.dll")
---[NoImage] MyLoadPlugin("Anime\Anti-aliasing\UnFilter.dll")
---[NoImage] MyLoadPlugin("Anime\Anti-aliasing\SangNom.dll")
---[NoImage] MyLoadPlugin("Anime\Line Darkener\Toon-v1.0-lite.dll")
---[NoImage] MyLoadPlugin("Decomb.dll")
---[NoImage] MyImport("Anime\Anti-aliasing\AAA.avs")
---[NoImage] LoadPlugin("K:\Documents and Settings\Luca\Documenti\Software\Video Editing\MeGUI_0.3.5\tools\dgindex\DGDecode.dll")
---[NoImage] DGDecode_mpeg2source("K:\Temp\Temp Megui\tokyo.d2v")
---[NoImage] SetMTMode(2,2)
---[NoImage] # Deinterlacer
---[NoImage] AssumeTFF().Telecide(guide=1).Decimate(mode=1,threshold=2.0)
---[NoImage] # Spatial Denoiser
---[NoImage] RemoveGrain(2).RemoveGrain(2)
---[NoImage] # Cropper
---[NoImage] crop(14, 4, -8, -2)
---[NoImage] # Resizer
---[NoImage] LanczosResize(696,520) # Lanczos (Sharp)
---[NoImage] # Dehalo
---[NoImage] fft3dfilter(bt=-1, plane=0, dehalo=1.0, hr=2.0, ht=50, svr=0, sharpen=1.3)
---[NoImage] # Sharpener
---[NoImage] aWarpSharp2(depth=25)
---[NoImage] # Line darkner
---[NoImage] ToonLite()
---[NoImage] # Anti-aliasing
---[NoImage] AAA()
--[Information] [30/07/2013 12:27:09] Job commandline: "K:\Documents and Settings\Luca\Documenti\Software\Video Editing\MeGUI_0.3.5\tools\ffmpeg\ffmpeg.exe" -y -i "K:\Temp\Temp Megui\tokyo.avs" -c:v ffvhuff -threads 0 -sn -an -context 1 -vstrict -2 -pred 2 "K:\Temp\Temp Megui\hfyu_tokyo.avi"
--[Information] [30/07/2013 12:27:09] Process started
--[Information] [30/07/2013 12:27:09] Standard output stream
--[Information] [30/07/2013 12:27:09] Standard error stream
---[Information] [30/07/2013 12:27:09] ffmpeg version 1.2 Copyright (c) 2000-2013 the FFmpeg developers
---[Information] [30/07/2013 12:27:09] built on Mar 28 2013 00:28:48 with gcc 4.8.0 (GCC)
---[Information] [30/07/2013 12:27:09] configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib
---[Information] [30/07/2013 12:27:09] libavutil 52. 18.100 / 52. 18.100
---[Information] [30/07/2013 12:27:09] libavcodec 54. 92.100 / 54. 92.100
---[Information] [30/07/2013 12:27:09] libavformat 54. 63.104 / 54. 63.104
---[Information] [30/07/2013 12:27:09] libavdevice 54. 3.103 / 54. 3.103
---[Information] [30/07/2013 12:27:09] libavfilter 3. 42.103 / 3. 42.103
---[Information] [30/07/2013 12:27:09] libswscale 2. 2.100 / 2. 2.100
---[Information] [30/07/2013 12:27:09] libswresample 0. 17.102 / 0. 17.102
---[Information] [30/07/2013 12:27:09] libpostproc 52. 2.100 / 52. 2.100
---[Information] [30/07/2013 12:27:10] Input #0, avisynth, from 'K:\Temp\Temp Megui\tokyo.avs':
---[Information] [30/07/2013 12:27:10] Duration: 01:34:02.60, start: 0.000000, bitrate: 0 kb/s
---[Information] [30/07/2013 12:27:10] Stream #0:0: Video: rawvideo (YV12 / 0x32315659), yuv420p, 696x520, 108576 kb/s, 25 fps, 25 tbr, 25 tbn, 25 tbc
---[Information] [30/07/2013 12:27:10] Output #0, avi, to 'K:\Temp\Temp Megui\hfyu_tokyo.avi':
---[Information] [30/07/2013 12:27:10] Metadata:
---[Information] [30/07/2013 12:27:10] ISFT : Lavf54.63.104
---[Information] [30/07/2013 12:27:10] Stream #0:0: Video: ffvhuff (FFVH / 0x48564646), yuv420p, 696x520, q=2-31, 200 kb/s, 25 tbn, 25 tbc
---[Information] [30/07/2013 12:27:10] Stream mapping:
---[Information] [30/07/2013 12:27:10] Stream #0:0 -> #0:0 (rawvideo -> ffvhuff)
---[Information] [30/07/2013 12:27:10] Press [q] to stop, [?] for help
--[Error] [30/07/2013 13:51:05] Process exits with error: 0xC0000005 STATUS_ACCESS_VIOLATION (-1073741819)
--[Information] [30/07/2013 13:51:05] Job completed

13622

[AMiR9!WV]

how can I add batch of files to MeGUI ?
I have 200 files, each of them 3 GB and mkv format. I need to resize all of them to 848x480 (150 MB)
and hardcode one particular subtitle on all of them
And I know how to do this for one file in . But I want to know how should I do that for multiple files in MeGUI

[Kurtnoise]

If you know how to do this for 1 file, you should be able to do it also for the rest...and stop to cross-posting.

[LigH]

Make your preferred encoder (target size, encoding options) and AviSynth (resize) profile.
Clear job queue.
Open file via AVS Script Creator, select profiles, add job to queue.
^...
Run queue.

[hello_hello]

how can I add batch of files to MeGUI ?
I have 200 files, each of them 3 GB and mkv format. I need to resize all of them to 848x480 (150 MB)
and hardcode one particular subtitle on all of them
And I know how to do this for one file in . But I want to know how should I do that for multiple files in MeGUI

I assume you want to use the OneClick encoder. It has an option to open a folder full of files, so I assume it'll do batch encoding that way, but I've never used it myself.

You might need to set up an AVISynth template which already includes the desired resizing and adds the subtitles, then use it as the AVISynth template when opening the folder with the OneClick encoder.... someone who's used it for batch encoding may be able to provide more help if you need it.

If you know how to do this for 1 file, you should be able to do it also for the rest...and stop to cross-posting.

Isn't that the definition of not-batch encoding? ;)

[AMiR9!WV]

hi
thank you guys for helping me
i know how hardsub my subtitle in File Indexer
but i don't know how do that in One Click Encoder
if you explain to me how hardsub my susbtitle with One Click Encoder , that would be great
i know the Rest of other things i need to do in One Click Encoder ( add batch of 200 files , resize all of them ... )

[hello_hello]

I've never hardcoded subtitles using the OneClick encoder, but if I had to guess..... (you're wanting to hardcode the same subtitles into each encode, yes?)

Open a file for encoding with the file indexer, add the desired subtitles and copy the subtitle lines MeGUI adds to the script to the Windows clipboard. It'll be something like this:

LoadPlugin("C:\Program Files\MeGUI\tools\avisynth_plugin\VSFilter.dll")
TextSub("D:\subtitle.srt", 1)

The copied subtitle lines will be used when creating an AVISynth template. You can close the script creator and then create an AVISynth template while setting up the OneClick encoder like this:

Open the OneClick encoder.
Click on the Config button next to the OneClick profile drop down box.
When the configuration window opens, click on the Config button next to the AviSynth profile drop down box.
When the AVISynth configuration window opens, paste the copied subtitles into the template window below what's already there. You'll end up with an AVIsynth template which looks something like this:

<input>
<deinterlace>
<crop>
<resize>
<denoise>
LoadPlugin("C:\Program Files\MeGUI\tools\avisynth_plugin\VSFilter.dll")
TextSub("D:\subtitle.srt", 1)

Naturally the "LoadPlugin" line might be different to match the location where MeGUI is installed, and the last line will point to the location of the actual subtitle file.

Use the "New" button down the bottom to save a new AVIsynth template. Give it an appropriate name. Click on OK to close the AVIsynth configuration.
Back in the OneClick configuration window select your newly saved AVIsynth profile from the drop down box (if it's not already selected).
Change any other OneClick settings for cropping, resizing and/or encoder configuration etc.
Click on the "New" button to save the OneClick setup as a new preset and give it an appropriate name etc.
Click okay to close the OneClick configuration and go back to the OneClick encoder.
Select your newly saved OneClick profile from the drop down box (if it's not already selected).
Open the folder full of files for re-encoding.

I'll be honest and admit I've rarely use the OneClick encoder and not tested the above, but logically that's the way you hardcode the same subtitles to each file while batch encoding. You're basically creating an AVISynth template which includes the subtitles, then using that template in the OneClick encoder setup. I assume you can add anything else to the AVISAynth template you want to, such as denoising, resizing or a specific amount of cropping etc (rather then use OneClick's autocropping and resizing) but the above should add the subtitles and let OneClick do the rest.
Please let me know if it works okay. :)

[Ruriko]

I want to use the One click encoder to convert files from mkv to avi but it won't work. I have checked avi in the output but it won't process files when I select the folder for it to convert

[hello_hello]

You might need to supply some more details. ie when you say it won't process files, what happens? Is there some sort of error? It might pay to post the MeGUI log file.

[Shevek]

When I first started using MeGUI the guide said to always use the Noise Filter (at least Minimum) for every encode as it made the encode better. (MeGUI/Basic DVD Ripping Guide/Video (http://mewiki.project357.com/wiki/MeGUI/Basic_DVD_Ripping_Guide/Video))

I've been doing so ever since, but wondered, is this still the right thing to do?

[dj-big]

i use avc lvl 4.1 in vbv Buff and bitrate megui auto put 62500 for bitrate and 78125 for buff when my encode finish in log it has warning in standard error stream and it said :


-[Information] [8/14/2013 10:18:44 AM] resolution: 1920x818
-[Information] [8/14/2013 10:18:44 AM] frame rate: 24000/1001
-[Information] [8/14/2013 10:18:44 AM] aspect ratio: 960:409 (2.347)
-[Information] [8/14/2013 10:18:44 AM] changing --ref to 5
-[Information] [8/14/2013 10:18:44 AM] Process started
-[Information] [8/14/2013 10:18:44 AM] Standard output stream
--[Information] [8/14/2013 1:09:06 PM] avs [info]: AviSynth 2.58, build:Dec 22 2008 [08:46:51]
--[Information] [8/14/2013 1:09:06 PM] avs [info]: Video colorspace: YV12
--[Information] [8/14/2013 1:09:06 PM] avs [info]: Video resolution: 1920x818
--[Information] [8/14/2013 1:09:06 PM] avs [info]: Video framerate: 24000/1001
--[Information] [8/14/2013 1:09:06 PM] avs [info]: Video framecount: 280742
-[Warning] [8/14/2013 10:18:44 AM] Standard error stream
--[Information] [8/14/2013 10:18:47 AM] raw [info]: 1920x818p 1:1 @ 24000/1001 fps (cfr)
--[Information] [8/14/2013 10:18:47 AM] x264 [info]: using SAR=1/1
--[Warning] [8/14/2013 10:18:47 AM] x264 [warning]: VBV bitrate (62500) > level limit (50000)
--[Warning] [8/14/2013 10:18:47 AM] x264 [warning]: VBV buffer (78125) > level limit (62500)
--[Information] [8/14/2013 10:18:47 AM] x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
--[Information] [8/14/2013 10:18:47 AM] x264 [info]: profile Main, level 4.1
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: frame I:4676 Avg QP:19.46 size: 61726
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: frame P:147949 Avg QP:22.52 size: 17003
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: frame B:128117 Avg QP:23.78 size: 4047
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: consecutive B-frames: 28.3% 32.1% 11.4% 11.5% 16.7%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: mb I I16..4: 61.2% 0.0% 38.8%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: mb P I16..4: 22.8% 0.0% 0.0% P16..4: 35.2% 0.0% 0.0% 0.0% 0.0% skip:42.0%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: mb B I16..4: 1.4% 0.0% 0.0% B16..8: 12.8% 0.0% 0.0% direct: 4.6% skip:81.2% L0:33.2% L1:52.4% BI:14.4%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: final ratefactor: 22.63
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: direct mvs spatial:90.4% temporal:9.6%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: coded y,uvDC,uvAC intra: 22.4% 28.4% 4.3% inter: 7.7% 6.5% 0.1%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: i16 v,h,dc,p: 44% 24% 20% 12%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 24% 18% 16% 8% 8% 7% 7% 6% 6%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: i8c dc,h,v,p: 63% 16% 18% 3%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: Weighted P-Frames: Y:2.8% UV:0.9%
--[Information] [8/14/2013 1:09:06 PM] x264 [info]: kb/s:2270.16
--[Information] [8/14/2013 1:09:06 PM] encoded 280742 frames, 27.47 fps, 2270.16 kb/s
-[Information] [8/14/2013 1:09:06 PM] Postprocessing
--[Information] [8/14/2013 1:09:06 PM] Deleting intermediate files
-[Information] [8/14/2013 1:09:06 PM] Job completed



look at the red parts .
so whats wrong megui automatically put wrong numbers for VBV Buffer and Bitrate ?!
another question is can i change this to paraments excatly the same as avc level ? ( i mean 62500 for buffer and 50000 for bitrate ) ?
another question is : this parameters effect in quality of video ?

[detmek]

Don't worry about that. It is just a warrning and does not affect encoding. You use 2-pass mode but 1st pass defaults to Main profile which has lower VBV than High profile used during 2nd pass. That is why you see this only during 1st pass.
But yes, that is one of the reasons why I didn't like idea for MeGUI to automatically set VBV when user chooses Level.

[Dahitman]

Hey guys. I recently got a preset from someone and for some reason I can't use it.

After Megui finishes encoding the audio and moves to the video, the video encoding window just disappears.
Here's the log: http://fbe.am/mI2


[Error] Log
-[Warning] Versions
--[Information] [15-08-2013 13:25:14] MeGUI: 2356
--[Information] [15-08-2013 13:25:14] Operating System: Windows 7 Premium Edition x64 SP1 (6.1.65536.7601)
--[Information] [15-08-2013 13:25:14] .Net Framework: 4.0 (4.0.30319)
--[Information] [15-08-2013 13:25:14] AviSynth: 2.5.8.5 (21-12-2008 21:46:54)
--[Information] [15-08-2013 13:25:14] AvisynthWrapper: 02-01-2009 20:34:04
--[Warning] [15-08-2013 13:25:15] Haali Matroska Splitter: not installed
--[Warning] [15-08-2013 13:25:15] Haali DSS2: not installed
--[Information] [15-08-2013 13:25:15] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008 20:31:12)
--[Information] [15-08-2013 13:25:15] LinqBridge: 1.0.0.0 (28-05-2009 01:24:34)
--[Information] [15-08-2013 13:25:15] MediaInfo: 0.7.63.0 (13-05-2013 10:47:16)
--[Information] [15-08-2013 13:25:15] MediaInfoWrapper: 0.7.61.0 (06-01-2013 14:47:15)
--[Information] [15-08-2013 13:25:15] MessageBoxExLib: 1.0.2218.28317 (19-12-2008 20:53:04)
--[Information] [15-08-2013 13:25:15] SevenZipSharp: 0.64.3890.29348 (02-01-2011 10:59:32)
--[Information] [15-08-2013 13:25:15] 7z: 9.20 (18-11-2010 16:27:34)
-[Information] Update detection
--[Information] [15-08-2013 13:25:15] Connecting to server: http://megui.xvidvideo.ru/auto/stable/
--[Information] [15-08-2013 13:25:16] All files are up to date
-[Information] AutoEncode job generation log
--[Information] [15-08-2013 13:27:21] Split Size : null
--[Information] Eliminating duplicate filenames
---[Information] [15-08-2013 13:27:21] Video output file: C:\Users\Jorge\Desktop\Kakumeiki Valvrave.264
---[Information] [15-08-2013 13:27:21] Muxed output file: C:\Users\Jorge\Desktop\Kakumeiki Valvrave-muxed.mkv
---[Information] [15-08-2013 13:27:21] Encodable audio stream 0: C:\Users\Jorge\Desktop\Kakumeiki Valvrave.m4a
-[Information] Log for job31 (audio, Kakumeiki Valvrave.mkv -> Kakumeiki Valvrave.m4a)
--[Information] [15-08-2013 13:27:22] Started handling job
--[Information] [15-08-2013 13:27:22] Preprocessing
--[Information] [15-08-2013 13:27:22] MediaInfo
---[Information] File: C:\Users\Jorge\Desktop\Kakumeiki Valvrave.mkv
---[Information] General
----[Information] Format: Matroska
----[Information] FormatString: Matroska
----[Information] FileSize: 1982861576
----[Information] PlayTime: 00:24:28.135
---[Information] Video
----[Information] ID: 1
----[Information] StreamOrder: 0
----[Information] Width: 1920
----[Information] Height: 1080
----[Information] FrameCount: 35200
----[Information] FrameRate: 23.976
----[Information] FrameRateOriginal:
----[Information] FrameRateMode: CFR
----[Information] ScanType: Progressive
----[Information] Codec: V_MPEG4/ISO/AVC
----[Information] CodecString: AVC
----[Information] Format: AVC
----[Information] AspectRatio: 1.778
----[Information] AspectRatioString: 16:9
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
---[Information] Audio
----[Information] ID: 2
----[Information] StreamOrder: 1
----[Information] Format: FLAC
----[Information] FormatProfile:
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2:
----[Information] BitRateMode: VBR
----[Information] Delay: 0
----[Information] Title: Main
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: Yes
----[Information] DefaultString: Yes
----[Information] Forced: No
----[Information] ForcedString: No
---[Information] Audio
----[Information] ID: 3
----[Information] StreamOrder: 2
----[Information] Format: FLAC
----[Information] FormatProfile:
----[Information] FormatSettingsSBR:
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2:
----[Information] BitRateMode: VBR
----[Information] Delay: 0
----[Information] Title: Commentary
----[Information] Language:
----[Information] LanguageString:
----[Information] Default: No
----[Information] DefaultString: No
----[Information] Forced: No
----[Information] ForcedString: No
--[Information] [15-08-2013 13:27:22] Trying to open the file with NicAudio
--[Information] [15-08-2013 13:27:22] Failed opening the file with NicAudio()
--[Information] [15-08-2013 13:27:22] Trying to open the file with BassAudioSource()
--[Information] [15-08-2013 13:27:25] Failed opening the file with BassAudioSource(). File could not be opened!
--[Information] [15-08-2013 13:27:25] Trying to open the file with FFAudioSource()
--[Information] [15-08-2013 13:28:42] Successfully opened the file with FFAudioSource()
--[Information] [15-08-2013 13:28:42] Avisynth script
---[NoImage] LoadPlugin("C:\Users\Jorge\Desktop\MeGUI_2356_x86\tools\ffms\ffms2.dll")
---[NoImage] FFAudioSource("C:\Users\Jorge\Desktop\Kakumeiki Valvrave.mkv")
---[NoImage] Normalize()
---[NoImage] return last
--[Information] [15-08-2013 13:28:42] Commandline used: -ignorelength -lc -q 0.2 -if - -of "{0}"
--[Information] [15-08-2013 13:28:42] Avisynth script environment opened
--[Information] [15-08-2013 13:28:42] Script loaded
--[Information] [15-08-2013 13:28:42] Output Decoder
---[Information] [15-08-2013 13:28:42] Channels: 2
---[Information] [15-08-2013 13:28:42] Bits per sample: 32
---[Information] [15-08-2013 13:28:42] Sample rate: 48000
--[Information] [15-08-2013 13:28:42] Job commandline: C:\Users\Jorge\Desktop\MeGUI_2356_x86\tools\eac3to\neroAacEnc.exe -ignorelength -lc -q 0.2 -if - -of "C:\Users\Jorge\Desktop\Kakumeiki Valvrave.m4a"
--[Information] [15-08-2013 13:28:42] Process started
--[Information] [15-08-2013 13:28:42] Standard output stream
--[Information] [15-08-2013 13:28:42] Standard error stream
---[Information] [15-08-2013 13:28:53] *************************************************************
---[Information] [15-08-2013 13:28:53] * *
---[Information] [15-08-2013 13:28:53] * Nero AAC Encoder *
---[Information] [15-08-2013 13:28:53] * Copyright 2009 Nero AG *
---[Information] [15-08-2013 13:28:53] * All Rights Reserved Worldwide *
---[Information] [15-08-2013 13:28:53] * *
---[Information] [15-08-2013 13:28:53] * Package build date: Feb 18 2010 *
---[Information] [15-08-2013 13:28:53] * Package version: 1.5.4.0 *
---[Information] [15-08-2013 13:28:53] * *
---[Information] [15-08-2013 13:28:53] * See -help for a complete list of available parameters. *
---[Information] [15-08-2013 13:28:53] * *
---[Information] [15-08-2013 13:28:53] *************************************************************
--[Information] [15-08-2013 13:29:22] MediaInfo
---[Information] File: C:\Users\Jorge\Desktop\Kakumeiki Valvrave.m4a
---[Information] General
----[Information] Format: MPEG-4
----[Information] FormatString: MPEG-4
----[Information] FileSize: 9463317
----[Information] PlayTime: 00:24:28.203
---[Information] Audio
----[Information] ID: 1
----[Information] StreamOrder: 0
----[Information] Format: AAC
----[Information] FormatProfile: LC
----[Information] FormatSettingsSBR: No (Explicit)
----[Information] FormatSettingsPS:
----[Information] SamplingRate: 48000
----[Information] SamplingRateString: 48.0 KHz
----[Information] Channels: 2
----[Information] ChannelsString: 2 channels
----[Information] ChannelPositionsString2: 2/0/0
----[Information] BitRateMode: VBR
----[Information] Delay: 0
----[Information] Title:
----[Information] Language:
----[Information] LanguageString:
----[Information] Default:
----[Information] DefaultString:
----[Information] Forced:
----[Information] ForcedString:
--[Information] [15-08-2013 13:29:22] Postprocessing
---[Information] [15-08-2013 13:29:22] Deleting intermediate files
----[Information] [15-08-2013 13:29:22] Successfully deleted C:\Users\Jorge\Desktop\Kakumeiki Valvrave.mkv.ffindex
--[Information] [15-08-2013 13:29:22] Job completed
-[Error] Log for job32 (video, Kakumeiki Valvrave.avs -> Kakumeiki Valvrave.264)
--[Information] [15-08-2013 13:29:22] Started handling job
--[Information] [15-08-2013 13:29:22] Preprocessing
--[Information] [15-08-2013 13:29:22] Avisynth input script
---[NoImage] LoadPlugin("C:\Users\Jorge\Desktop\MeGUI_2356_x86\tools\avs\directshowsource.dll")
---[NoImage] DirectShowSource("C:\Users\Jorge\Desktop\Kakumeiki Valvrave.mkv", fps=29.976, audio=false, convertfps=true).AssumeFPS(29976,1000)
---[NoImage] #deinterlace
---[NoImage] #crop
---[NoImage] #resize
---[NoImage] #denoise
---[NoImage] ConvertToYV12()
--[Information] [15-08-2013 13:29:23] resolution: 1920x1080
--[Information] [15-08-2013 13:29:23] frame rate: 3747/125
--[Information] [15-08-2013 13:29:23] aspect ratio: 16:9 (1.778)
--[Information] [15-08-2013 13:29:23] custom command line: --fgo 5 --fade-compensate 0.3 --psy-rd 0.4:0.2
--[Information] [15-08-2013 13:29:23] Job commandline: "C:\Users\Jorge\Desktop\MeGUI_2356_x86\tools\x264\x264.exe" --preset placebo --tune animation --crf 15.0 --keyint 300 --b-pyramid none --qpmin 10 --qpmax 51 --vbv-bufsize 30000 --vbv-maxrate 40000 --rc-lookahead 80 --merange 32 --me umh --subme 10 --fgo 5 --fade-compensate 0.3 --psy-rd 0.4:0.2 --sar 1:1 --output "C:\Users\Jorge\Desktop\Kakumeiki Valvrave.264" "C:\Users\Jorge\Desktop\Kakumeiki Valvrave.avs"
--[Information] [15-08-2013 13:29:23] Process started
--[Information] [15-08-2013 13:29:23] Standard output stream
--[Information] [15-08-2013 13:29:23] Standard error stream
---[Information] [15-08-2013 13:29:23] C:\Users\Jorge\Desktop\MeGUI_2356_x86\tools\x264\x264.exe: unknown option -- fgo
--[Error] [15-08-2013 13:29:23] Process exits with error: 0xFFFFFFFF (-1)
--[Information] [15-08-2013 13:29:23] Job completed
-[Information] AutoEncode job generation log


Thanks in advance.

[LigH]

The option --fgo was an experiment in 2008 (http://forum.doom9.org/showthread.php?t=139685). It is not supported in current official x264 builds.

There are no miracle presets. Either try to understand the advanced options, or trust in the defaults used with basic presets and tunings.