AVStoDVD Support Thread

[MrC]

sharpening, as in digital photo imaging, should ALWAYS be the last part of the workflow, including after resizing...so msharpen should remain after the resize.

Sounds reasonable. Will do. :)

also, as a suggestion, could you make it so there is a registry entry to make the defaults for AQ and lumgain in HCenc? I always use 2 for each, this way one can leave this for all projects and never have to worry about forgetting it.

Do you mean reg keys that are updated each time the user select an advanced HCenc setting, or "phantom" reg keys the user has to edit manually?

;)

Bye

[flebber]

also, as a suggestion, could you make it so there is a registry entry to make the defaults for AQ and lumgain in HCenc? I always use 2 for each, this way one can leave this for all projects and never have to worry about forgetting it.

thanks!!!

You can save the encoder preferences as I use HC with AQ 2 Lum 2 as well by ticking the checkbox at bottom left of settings when you are editing.

It says something similar to " Accept these settings as default"

[ron spencer]

Sounds reasonable. Will do. :)



Do you mean reg keys that are updated each time the user select an advanced HCenc setting, or "phantom" reg keys the user has to edit manually?

;)

Bye

phantom I think.... that way one could leave the automatic setting always checked and never have to worry

[qyot27]

HCenc defaults to AQ 2 anyway. Has since sometime during 0.24. You'd still need to adjust LUMGAIN, though.

[ron spencer]

HCenc defaults to AQ 2 anyway. Has since sometime during 0.24. You'd still need to adjust LUMGAIN, though.

yes you are right...just nice to be able to adjust all and leave "forever"

[flebber]

yes you are right...just nice to be able to adjust all and leave "forever"

See my post above you can

[ron spencer]

See my post above you can

I see no such thing, except under preferences, which does not keep the HC params in question

[ron spencer]

HCenc defaults to AQ 2 anyway. Has since sometime during 0.24. You'd still need to adjust LUMGAIN, though.

AVS2DVD passes 1 to override HCenc default...just checked it

[MrC]

What do you think about something like that?

https://sites.google.com/site/avstodvdmain/HCenc_options.png

;)

Bye

[ron spencer]

sure...is nice!!!

Noticed one other thing...if one makes custom changes to the AVISynth tab, and then you go to another tab, the changes you made in the AVISynth tab "reset" to defaults. That is, what you entered is gone.

cheers!!!

[MrC]

Noticed one other thing...if one makes custom changes to the AVISynth tab, and then you go to another tab, the changes you made in the AVISynth tab "reset" to defaults. That is, what you entered is gone.

Do you mean the 'Title Edit' form tabs? That's strange, because I cannot replicate it. Could you specify the issue step by step?

:confused:

Bye

[ron spencer]

Do you mean the 'Title Edit' form tabs? That's strange, because I cannot replicate it. Could you specify the issue step by step?

:confused:

Bye

well I checked...still was a problem for me...so I tried the good old reinstall.

works fine. must have been a transient problem

[flebber]

I received this error after Hcenc had finished encoding and AVS2DVD was about to burn image.

Error stated length 00:00:00 was shorter that expected 01:19:38 .

This is the log.
<24/10/2010 4:25:28 PM>
START PROCESS
<>

<24/10/2010 4:25:28 PM>
PROJECT SETTINGS

DVD Video Standard: PAL
DVD Titles number: 1
DVD Size: 4450/4450 MB (100%)
DVD Output Setup: Burn DVD
DVD Label: DVD
DVD Menu: No Menu
Output Folder: C:\Documents and Settings\Family\My Documents\My Videos
Delete Temp Process Files: Yes
Delete Working Files: Yes
Edit Command Parameters: No
Post Process Task: Show Progress Status window

PREFERENCES

MultiThread: 1
AVS Source Filter: FFMpegSource
AVS UpSize/DownSize Filter: Lanczos4Resize/Spline64Resize
Video Resolution: 0
Video BitRate Min: 2500
Video BitRate Level 1: 6500
Video Profile Level 2: 4500
Video BitRate Max: 8500
Keep DVD Compliant Video: 1
AC3 Audio Encoder: 0
PAL SpeedUp: 0
Force FFmpeg for Long Audio: 1
DVD Audio Format: 0
DVD Audio BitRate: 192
Keep DVD Compliant Audio: 1
Normalize Audio: 0
DVD Audio Language: EN - English
DVD Subs Language: EN - English
DVD Subs Font: Tahoma 18pt Bold
Chapters Interval: 5
Use Source Chapters: 1
DVD Burning Drive: D: HL-DT-ST DVD-RAM GH22NP20 1.04
DVD Burning Speed: 4x
Auto Erase DVD RW: 1
Save Log file: 1
Save General Settings: 0
Unload ActiveMovie library: 0
Adjust ffdshow mixer: 1
<>

<24/10/2010 4:25:28 PM>
TITLE 1 SOURCE FILES
Video: C:\Documents and Settings\Family\My Documents\My Videos\Snow White\Snow White & The Seven Dwarves.MKV
Info: AVC - 0 kbps - 720x528 - DAR 1.364 - 25 fps (CFR) - Progressive - 1:19:45 hours - 119643 frames
Audio 1: C:\Documents and Settings\Family\My Documents\My Videos\Snow White\Snow White & The Seven Dwarves.MKV
Info: AAC LC - 0 kbps - CBR - 6ch - 48000Hz - 1:19:45 hours - Internal
Subs:
[MediaInfoLib - v0.7.35]
<>

<24/10/2010 4:25:28 PM>
AVISYNTH SCRIPT
LoadPlugin("C:\Program Files\AVStoDVD\Lib\ffms2.dll")

Audio = FFAudioSource("C:\Documents and Settings\Family\My Documents\My Videos\Snow White\Snow White & The Seven Dwarves.MKV", track=-1, cachefile="C:\DOCUME~1\Family\LOCALS~1\Temp\A2DFFA_" + String(Rand()) + ".cache")
Video = FFVideoSource("C:\Documents and Settings\Family\My Documents\My Videos\Snow White\Snow White & The Seven Dwarves.MKV", track=-1, cachefile="C:\DOCUME~1\Family\LOCALS~1\Temp\A2DFFV_" + String(Rand()) + ".cache", seekmode=0)

Video = Video.ConvertToYV12
Video = Video.AddBorders(0,6,0,6)
Video = Video.Lanczos4Resize(720,576)

AudioDub(Video, Audio)
<>

<24/10/2010 4:25:28 PM>
START VIDEO ENCODING OPERATIONS
Encoding Profile: HCenc VBR 1-pass
Target Video FileSize: 4112.4 MB
HCenc Parameters: -ini "C:\DOCUME~1\Family\LOCALS~1\Temp\DVD_2_Snow White & The Seven Dwarves.HCenc.ini"
HCenc ini file:
*INFILE C:\DOCUME~1\Family\LOCALS~1\Temp\DVD_2_Snow White & The Seven Dwarves_1.avs
*AVSRELOAD
*OUTFILE C:\Documents and Settings\Family\My Documents\My Videos\DVD_2_Snow White & The Seven Dwarves.m2v
*LOGFILE C:\DOCUME~1\Family\LOCALS~1\Temp\DVD_2_Snow White & The Seven Dwarves.HCenc.log
*MAXBITRATE 9000
*1PASS
*BITRATE 7208
*PROFILE BEST
*ASPECT 4:3
*PROGRESSIVE
*TFF
*BIAS 70
*DC_PREC 10
*MATRIX MPEG
*AQ 2
*LUMGAIN 2
*SMP
*PRIORITY IDLE
*WAIT 2
<>

<24/10/2010 5:44:16 PM>
END VIDEO ENCODING OPERATIONS
Created File: C:\Documents and Settings\Family\My Documents\My Videos\DVD_2_Snow White & The Seven Dwarves.m2v (3925.9 MB)
<>

<24/10/2010 5:44:26 PM>
PROCESS ABORTED DURING TITLE 1 VIDEO ENCODING OPERATIONS.

CHECK LOG FILE <C:\DOCUMENTS AND SETTINGS\FAMILY\MY DOCUMENTS\MY VIDEOS\DVD_2.LOG> FOR MORE INFO.
<>

<24/10/2010 5:44:27 PM>
Log file created by AVStoDVD Release 2.3.2
<>

[MrC]

I received this error after Hcenc had finished encoding and AVS2DVD was about to burn image.

Error stated length 00:00:00 was shorter that expected 01:19:38

It seems that MediaInfo (0.7.35) has detected 0 seconds video duration. Could you check with a standalone MediaInfo?

;)

Bye

[MrC]

@flebber

see here (http://sourceforge.net/projects/avstodvd/forums/forum/700796/topic/3894449) if it may help.

;)

Bye

[gautxori]

I would be very thankful if all the application windows could fit in a 1024x768 screen: "Menu Editor" is 774 pixels high...

Great program, BTW.

[Bellona]

Which version of FFDShow should we be using with AVStoDVD 2.3.2? Was it tested using a particular version?

The FFDShow Tryouts website (http://ffdshow-tryout.sourceforge.net/download.php) lists rev3154 as the "official" version, but the latest versions go up to rev3611 at the time of this post.

[MrC]

@gautxori

thanks for the kind words. I know that Menu Editor is a bit tall (my std res is 1280x768), I will try to steal some pixels everywhere to best fit it.

@Bellona

I usually avoid to use ffdshow not stable release. I have perfomed all my tests using official beta 7.

;)

Bye

[Bellona]

@Bellona

I usually avoid to use ffdshow not stable release. I have perfomed all my tests using official beta 7.

;)

Bye

Thanks MrC!

[abyss616]

I am having problems with FFmpeg Encoder that have just started recently. When I try to edit the menu, the second window will pop up and generate the first thumbnail. Then a box will pop up that says "FFmpeg video converter has stopped working." I close it out and then the second thumbnail will generate and the error window pops up again. This will continue for each title I have on the DVD. The menu generates fine and I can edit all the elements.

The FFmpeg error message also pops up when using HCEnc as my video encoder, but only after completing each title.

This only happened within the last week or so and I use this program often - what's going on? Thanks.

(a screencap of what pops up in a separate window when generating thumbnails is attached).

[MrC]

This only happened within the last week or so and I use this program often - what's going on?

If before *something* everything was ok, you should understand what's that *something* and try to reverse back. I could only guess:

- codec updates
- AviSynth broken
- "invasive" software installation
- replacement of FFmpeg with a newer release

but I have no crystal ball...

;)

Bye

[abyss616]

As far as I can figure, there was no *something* that would have changed anything. Since this, I have reinstalled AVStoDVD (same crashes), replaced ffmpeg.exe and HCenc.exe with no differences. I'm also getting "avs2avi.exe has stopped working" when editing the menu as well. So encoding with quenc gives me no errors, but encoding with HCenc does (only once finishing the encode). Editing menu items causes ffmpeg to crash no matter what.

Can't think any changes that would cause it to stop working all of the sudden. Avisynth works fine in VirtualDub and I haven't updated any codecs. TIA.

[harnarn]

Hi friends..
Avs2DVD have worked flawless for me every time ..
but now then i start up a project and want to use meny editor ..NADA..
i have added a videofile+audio and a srt sub and done all settings like before and saved as a a2xx.file then i start up the meny editor it gives a error
http://lulzimg.com/i8/f6402f26.jpg

and then after ok the editor does nada..
any idea

[MrC]

@harnarn

some questions:

1. Have you ever used Menu Editor without issues? Even with latest 2.3.2?
2. What is a2xx.file?
3. Have you already tried to unistall AVStoDVD (and clear AVStoDVD reg key) and install it again?

;)

Bye

[harnarn]

@harnarn

some questions:

1. Have you ever used Menu Editor without issues? Even with latest 2.3.2?
2. What is a2xx.file?
3. Have you already tried to unistall AVStoDVD (and clear AVStoDVD reg key) and install it again?

;)

Bye

Thanks for replay .
1.I have unistalled the latest version and reinstalled 2.3.2 and then it worked as before.
2. a2xx.file i didn't remember the exact name but it's the prodject file..
3. I will now try to reenc the same movie again,,If it don't work i will return with a logfile..

Okies have now tried it out but a bluescreen was the out come of this and after reboot the same behaviour like before..

trying to edit video properties gives following message
picture1 (http://lulzimg.com/i8/6f5c9c92.jpg)

And then trying to open menymanager
Picture 2 (http://lulzimg.com/i8/f6402f26.jpg)

[MrC]

If I have understood correctly, you get no errors the first time you add a title, then, after saving the .a2d project and reload it, you are getting errors.

Correct?

;)

Bye

P.S. Where did you get the file you want to convert?

[harnarn]

If I have understood correctly, you get no errors the first time you add a title, then, after saving the .a2d project and reload it, you are getting errors.

Correct?

;)

Bye

P.S. Where did you get the file you want to convert?

So far this is what i have done ..
1. Uninstalled 2.3.2 latest
2.Installed the 2.3.2 alpha build 100913 with hotfix
3.manually installed HcEnc 0.25
4.Started up a new project with output of muxed mpeg2, worked like a clock
5. Reloaded the same project but did change to dvd5 folder output, after this tried to open menu wizard and "error 35603 Invalid key".. after this press ok on error dialogue popup window..
menu wizard starts up but u can't do anything with it, u can tick the alternative boxes but as soon u press run editor "runtime error 91 Object variable or with block variable not set", then pressing ok on error popup application shuts (AVS2DVD)down .completly

[MrC]

Thanks for the complete feedback.

Could be a bug in the load project routine? Could be. May you send me the .a2d file by email (avstodvd@gmail.com)?

;)

Bye

[harnarn]

Thanks for the complete feedback.

Could be a bug in the load project routine? Could be. May you send me the .a2d file by email (avstodvd@gmail.com)?

;)

Bye

On it's way

[Big Vern]

I've been using this tool for a while now with no problems, even used it today. I just tried to use it again, and it come up with this error:-

runtime error "9": subscript out of range

They only thing I have done since last use was uninstall firefox browser, cos it was freezing my PC under windows 7 64 bit and replaced with safari. Could that be the cause, if not, any ideas?

Regards........

[MrC]

it come up with this error:-

runtime error "9": subscript out of range

When exactly does this message come out?

Have you already tried to uninstall AVStoDVD and reinstall it again?

;)

Bye

[Big Vern]

When exactly does this message come out?

Have you already tried to uninstall AVStoDVD and reinstall it again?

;)

Bye

The error appears as soon as I click the AVStoDVD.exe file.

I uninstalled and re-installed the program and even tired the no-installer version, same thing.

*EDIT* I re-installed Firefox, now the damn thing works!?!?!?

[freemanvn]

how to add 2 subtitles or more into AVStoDVD,please help me,thx...

[MrC]

how to add 2 subtitles or more into AVStoDVD,please help me,thx...

AVStoDVD supports only one subtitle so far. BTW multi subs is in the ToDo list.

;)

Bye

[leoliver]

Just wanted to say that it's been over a year now since I've had any problems with AVStoDVD . The new builds just keep getting better.
By the way , are there any new AVStoDVD releases planned anytime soon ?
Keep up the good work !

[MrC]

Just wanted to say that it's been over a year now since I've had any problems with AVStoDVD . The new builds just keep getting better.
By the way , are there any new AVStoDVD releases planned anytime soon ?
Keep up the good work !

Thanks for the encouragement, leoliver, very appreciated.

Yes, release 2.3.3 is almost ready. Just few days.

;)

Bye

[Sjakko]

Hi MrC. Any news about a chapters based menu? (http://forum.doom9.org/showthread.php?p=1398879#post1398879)

:thanks:

[MrC]

Hi MrC. Any news about a chapters based menu? (http://forum.doom9.org/showthread.php?p=1398879#post1398879)

Unfortunately no news so far. And no news on the horizon. There's too much code to be written and my current free time is so small.

And Sir Didymus is still missing...

;)

Bye

[abyss616]

I am having problems with FFmpeg Encoder that have just started recently. When I try to edit the menu, the second window will pop up and generate the first thumbnail. Then a box will pop up that says "FFmpeg video converter has stopped working." I close it out and then the second thumbnail will generate and the error window pops up again. This will continue for each title I have on the DVD. The menu generates fine and I can edit all the elements.

The FFmpeg error message also pops up when using HCEnc as my video encoder, but only after completing each title.

This only happened within the last week or so and I use this program often - what's going on? Thanks.

(a screencap of what pops up in a separate window when generating thumbnails is attached).

Any other insight into what my problem might be? Everything was working perfectly and it just stopped working. I installed it on another Windows 7 x64 computer i have and I get the same errors: FFmpeg encoder crash when I try to generate thumbnails for a menu. It also happens when ECenc finishes encoding a movie.

Crash analysis:
Problem Event Name: APPCRASH
Application Name: ffmpeg.exe
Application Version: 1.0.0.0
Application Timestamp: 4c545e5e
Fault Module Name: bass_mpc.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4383b424
Exception Code: c0000005
Exception Offset: 003c2be0
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Problem signature:
Problem Event Name: APPCRASH
Application Name: ffmpeg.exe
Application Version: 1.0.0.0
Application Timestamp: 4c545e5e
Fault Module Name: bassAudio.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 47da3274
Exception Code: c0000005
Exception Offset: 01652be0
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Problem signature:
Problem Event Name: APPCRASH
Application Name: avs2avi.exe
Application Version: 0.0.0.0
Application Timestamp: 40eb0522
Fault Module Name: avss.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4bf450b7
Exception Code: c0000005
Exception Offset: 00392be0
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: dbf0
Additional Information 2: dbf0418f7dbf43757e8b77f50f0722bc
Additional Information 3: d2a2
Additional Information 4: d2a2686e6ed50b721b240794915eb590


Thanks.

[Phishstx]

I am alos receiving the run-time 9 error subscript out of range. I have uninstalled and reinstalled to latest version. Program worked flawlessly for months until this past week with no rhyme or reason it wont execute. Just shows runtime error upon double clicking icon.
I have cleared the registry using ccleaner also to no avail. I can run it un xp mode but prefer not to as it was never required before and also it encodes 100 times slower.
Any help will be appreciated.
Thanks
~Erik

[MrC]

@Phishstx

When exactly do you get that error msg?

BTW, to reset everything:

1. Uninstall AVStoDVD
2. Locate folder "C:\Program Files\AVStoDVD" and manually delete it
3. Locate registry key "HKEY_CURRENT_USER\Software\AVStoDVD" and manually delete it
4. Re-install AVStoDVD

;)

Bye

[Phishstx]

@MrC
Thanks for the fast response. I have tried to reset as you outlined and resulted with the same error. The issue occurs when clicking the .exe file to launch AVStoDVD. The program does not launch into the gui at all and I immediately recive the runtime 9 error.
Hopefully this is a bit more clearer, the program did work corrclty a few weeks ago so I'm thinking its a win 7 issue, but I was hoping it might be AVStoDVD related before opening that can of worms.
Thanks again,
E

[MrC]

@Phishstx

ok, good luck with Win(worm)7 investigation

;)

Bye

[trabanom]

I had a AMD 3.2Ghz X4 CPU and it took 45 minutes to create a DVD from 4x 350Mb files.
Now I have a 3.0 X6 CPU and still spend 45 minutes to do the same job.
Does 0.2Ghz make so many difference that a X6 = X4 ?

[Soichiro]

Hi,

I'm having the same problem as Phishstx, with the "Runtime error 9: Subscript out of range". It happens every time I try to open AVStoDVD. It was the first time I've installed AVStoDVD on this computer. I tried uninstalling and reinstalling, tried installing an older version, and tried with the no_installer version. Nothing makes it work. I get the same error every time. I've tried running a registry cleaner and restarting and what not to no avail. Please assist.

[trabanom]

I dont know if it is the subtitle file or this new version:
<21/11/2010 00:09:12>
START PROCESS
<>

<21/11/2010 00:09:12>
PROJECT SETTINGS

DVD Video Standard: PAL
DVD Titles number: 4
DVD Size: 4450/4450 MB (100%)
DVD Output Setup: ISO UDF Image
DVD Label: DVD
DVD Menu: Motion Menu
Output Folder: Q:\dvd_temp
Delete Temp Process Files: Yes
Delete Working Files: Yes
Edit Command Parameters: No
Post Process Task: Show Progress Status window

PREFERENCES

MultiThread: 1
AVS Source Filter: A2DSource
AVS UpSize/DownSize Filter: Lanczos4Resize/Spline64Resize
Video Resolution: 0
Video BitRate Min: 2500
Video BitRate Level 1: 6500
Video Profile Level 2: 4500
Video BitRate Max: 8500
Keep DVD Compliant Video: 1
AC3 Audio Encoder: 0
PAL SpeedUp: 0
Force FFmpeg for Long Audio: 1
DVD Audio Format: 0
DVD Audio BitRate: 192
Keep DVD Compliant Audio: 1
Normalize Audio: 0
DVD Audio Language: EN - English
DVD Subs Language: EN - English
DVD Subs Font: Tahoma 18pt Bold
Chapters Interval: 5
Use Source Chapters: 1
DVD Burning Drive: N: HL-DT-ST DVDRAM GSA-4167B DL13
DVD Burning Speed: 4x
Auto Erase DVD RW: 1
Save Log file: 1
Save General Settings: 0
Unload ActiveMovie library: 0
Adjust ffdshow mixer: 1
<>

<21/11/2010 00:09:12>
TITLE 1 SOURCE FILES
Video: M:\Stargate Atlantis Season 5\move1.avi
Info: XviD - 989 kbps - 640x368 - DAR 1,739 - 23,976 fps (CFR) - Progressive - 43:17 minutes - 62278 frames
Audio 1: M:\Stargate Atlantis Season 5\move1.avi
Info: MPEG-1 Audio layer 3 - 132 kbps - VBR - 2ch - 48000Hz - 43:17 minutes - Internal
Subs: M:\Stargate Atlantis Season 5\move1.srt
[]
<>

<21/11/2010 00:09:12>
AVISYNTH SCRIPT
Import("H:\Program Files\AVStoDVD\Lib\A2DSource.avsi")

Video = A2DVideoSource("M:\Stargate Atlantis Season 5\move1.avi", CacheFolder="Q:\dvd_temp", VFR=false)
Audio = A2DAudioSource("M:\Stargate Atlantis Season 5\move1.avi", CacheFolder="Q:\dvd_temp")

Video = Video.ConvertToYV12
#Using DGPulldown/HCenc to upsize FPS
Video = Video.Lanczos4Resize(720,576,0,4,0,-4)

Audio = Audio.EnsureVBRMP3Sync()

AudioDub(Video, Audio)
<>

<21/11/2010 00:09:16>
START VIDEO ENCODING OPERATIONS
Encoding Profile: HCenc VBR 2-pass
Target Video FileSize: 1011,2 MB
HCenc Parameters: -ini "Q:\dvd_temp\DVD_0_Title_01_move1.HCenc.ini"
HCenc ini file:
*INFILE Q:\dvd_temp\DVD_0_Title_01_move1_1.avs
*AVSRELOAD
*OUTFILE Q:\dvd_temp\DVD_0_Title_01_move1.m2v
*LOGFILE Q:\dvd_temp\DVD_0_Title_01_move1.HCenc.log
*MAXBITRATE 9000
*BITRATE 3265
*PROFILE BEST
*ASPECT 16:9
*PROGRESSIVE
*TFF
*BIAS 30
*DC_PREC 8
*MATRIX MPEG
*AQ 1
*LUMGAIN 1
*SMP
*PRIORITY IDLE
*WAIT 2
<>

<21/11/2010 00:23:27>
END VIDEO ENCODING OPERATIONS
A2DVideoSource: AVISource
Created File: Q:\dvd_temp\DVD_0_Title_01_move1.m2v (1011,7 MB)
OUTPUT VIDEO INFO: MPEG-2 Video - 3290 kbps - 720x576 - DAR 1,778 - 23,976 fps (CFR) - Progressive (TFF) - 43:14 minutes - 62214 frames
<>

<21/11/2010 00:23:27>
START PULLDOWN OPERATIONS
DGPulldown Parameters: "Q:\dvd_temp\DVD_0_Title_01_move1.m2v" -srcfps 23.976 -destfps 25 -inplace -tff
<>

<21/11/2010 00:24:00>
END PULLDOWN OPERATIONS
DGPulldown executed on File: Q:\dvd_temp\DVD_0_Title_01_move1.m2v (1011,7 MB)
OUTPUT VIDEO INFO: MPEG-2 Video - 3287 kbps - 720x576 - DAR 1,778 - 24 fps (CFR) - Progressive (2:2:2:2:2:2:2:2:2:2:2:3 Pulldown) - 43:17 minutes - 62338 frames
<>

<21/11/2010 00:24:06>
START AUDIO ENCODING OPERATIONS (Track 1)
Wavi+Aften Parameters: "Q:\dvd_temp\DVD_0_Title_01_move1_1.avs" - | "H:\Program Files\AVStoDVD\Aften\aften.exe" -b 192 -pad 0 -dynrng 5 -bwfilter 0 - "Q:\dvd_temp\DVD_0_Title_01_move1_1.ac3"
<>

<21/11/2010 00:24:29>
END AUDIO ENCODING OPERATIONS (Track 1)
A2DAudioSource: DirectShowSource
Created File: Q:\dvd_temp\DVD_0_Title_01_move1_1.ac3 (59,5 MB)
OUTPUT AUDIO INFO: AC3 - 192 kbps - CBR - 2ch - 48000Hz - 16bit - 43:17 minutes
<>

<21/11/2010 00:24:29>
START SUBS ENCODING OPERATIONS
SubtitleCreator Parameters: "Q:\dvd_temp\DVD_0_Title_01_move1.srt" -p2 -i"H:\Program Files\AVStoDVD\SubtitleCreator\Examples\VTS_01_1.IFO"
<>

<21/11/2010 00:24:42>
PROCESS ABORTED DURING TITLE 1 SUBS ENCODING OPERATIONS.

CHECK LOG FILE <Q:\DVD_TEMP\DVD_0.LOG> FOR MORE INFO.
<>

<21/11/2010 00:24:42>
Log file created by AVStoDVD Release 2.3.2
<>

[ggtop]

I'm not a mod, but ...PREAIR.avi doesn't sound like you legally own the movie.

ggtop

[Nick]

@trabanom
Per the forum rules please do not bring problems processing such content here.
A quick edit of the post to remove dubious filenames only confirms your guilt!

Strike issued.

[MrC]

@Soichiro

please give me more info, such as OS name, OS bit version, if you have checked and installed all the required software in the Installer routine, if you can visualize the splash screen, if you can visualize main form, if you can try with another PC (another OS). Any additional info could be useful.

@trabanom

it seems an issue of bad formatted srt subtitle file. First, where did you get that file? Second, if you open it manually with SubtitleCreator, what error do you get?

;)

Bye

[Soichiro]

MrC: The OS on the computer in question is Windows 7 64-bit. I have all the required software installed. However, when I try to load the program, I don't even reach the splash screen. I simply get a message saying, "Run-time error '9': Subscript out of range", and when I click "OK" (which is my only option), the program simply closes. However, I can apparently run it on my Windows 2003 Server (also 64-bit). That doesn't particularly help me since that computer is 1000 miles away, but it will hopefully help track down the problem somewhat.