StaxRip

[chipxtreme]

So I use a pre-set for re-encoding x265 with NVEnc which I've used for a long time now. Seems decent(ish) quality and very fast.

Since v2.30 my Target box is missing options to Adjust Size in MB or Video Bitrate so having to stay on 2.29 for now.

Unless there's something i'm missing?

[kalehrl]

Can you add InpaintDelogo plugin:
https://forum.doom9.org/showthread.php?t=176860
Thank you.

[Emulgator]

You would just feed a script calling Inpaint DeLogo.

[kalehrl]

I tried but StaxRip has it's own plugins folder different from the system Avisynth one.
InpaintDelogo line which works when using system Avisynth didn't work in StaxRip.
I would need to put all InpaintDelogo plugins into StaxRip plugins folder but I've only recently started using it so I'm not sure how to do it.

[nakTT]

Hi good day.

I'm running the latest version of Staxrip (v2.31.0) using SVT-AV1.

It appear the encoding would fail if I use any other preset other than the default (10). Please help.

Thank you in advance.:thanks:


Below is the "detail error message":

Error Video encoding (v2.31.0)

Video encoding returned exit code: -1073741795 (0xC000001D)


--------------------------- Video encoding ---------------------------

SvtAv1EncApp 1.8.0-1+3-43997134-[Mod-by-Patman]-x64-msvc1938

"C:\Soft Mix\StaxRip 2.31.0\Apps\Support\avs2pipemod\avs2pipemod64.exe" -dll="C:\Soft Mix\StaxRip 2.31.0\Apps\FrameServer\AviSynth\AviSynth.dll" -y4mp "C:\Users\KAI\Desktop\Mix\Video Encoding Samples\300 HD Short_temp\300 HD Short_new.avs" | "C:\Soft Mix\StaxRip 2.31.0\Apps\Encoders\SvtAv1EncApp\SvtAv1EncApp.exe" --input - --width 1280 --height 528 --output "C:\Users\KAI\Desktop\Mix\Video Encoding Samples\300 HD Short_temp\300 HD Short_new_out.ivf" --frames 181 --rc 0 --progress 2 --preset 9

Svt[info]: -------------------------------------------
Svt[info]: SVT [version]: SVT-AV1 Encoder Lib v1.8.0-1+3-43997134 [Mod by Patman]
Svt[info]: SVT [build] : Visual Studio 2022 64 bit
Svt[info]: LIB Build date: Dec 27 2023 17:06:37
Svt[info]: -------------------------------------------
avs2pipemod[info]: writing 181 frames of 24000/1001 fps, 1280x528,
sar 0:0, YUV-420-planar-8bit progressive video.
Svt[info]: Number of logical cores available: 4
Svt[info]: Number of PPCS 74
Svt[info]: [asm level on system : up to avx2]
Svt[info]: [asm level selected : up to avx2]
Svt[info]: -------------------------------------------
Svt[info]: SVT [config]: main profile tier (auto) level (auto)
Svt[info]: SVT [config]: width / height / fps numerator / fps denominator : 1280 / 528 / 24000 / 1001
Svt[info]: SVT [config]: bit-depth / color format : 8 / YUV420
Svt[info]: SVT [config]: preset / tune / pred struct : 9 / PSNR / random access
Svt[info]: SVT [config]: gop size / mini-gop size / key-frame type : 161 / 32 / key frame
Svt[info]: SVT [config]: BRC mode / rate factor : CRF / 35
Svt[info]: -------------------------------------------
Encoding avs2pipemod[info]: finished, wrote 75 frames [41%].
avs2pipemod[info]: total elapsed time is 4.679 sec.
avs2pipemod[error]: only wrote 75 of 181 frames.

StaxRip.ErrorAbortException: Video encoding returned exit code: -1073741795 (0xC000001D)


--------------------------- Video encoding ---------------------------

SvtAv1EncApp 1.8.0-1+3-43997134-[Mod-by-Patman]-x64-msvc1938

"C:\Soft Mix\StaxRip 2.31.0\Apps\Support\avs2pipemod\avs2pipemod64.exe" -dll="C:\Soft Mix\StaxRip 2.31.0\Apps\FrameServer\AviSynth\AviSynth.dll" -y4mp "C:\Users\KAI\Desktop\Mix\Video Encoding Samples\300 HD Short_temp\300 HD Short_new.avs" | "C:\Soft Mix\StaxRip 2.31.0\Apps\Encoders\SvtAv1EncApp\SvtAv1EncApp.exe" --input - --width 1280 --height 528 --output "C:\Users\KAI\Desktop\Mix\Video Encoding Samples\300 HD Short_temp\300 HD Short_new_out.ivf" --frames 181 --rc 0 --progress 2 --preset 9

Svt[info]: -------------------------------------------
Svt[info]: SVT [version]: SVT-AV1 Encoder Lib v1.8.0-1+3-43997134 [Mod by Patman]
Svt[info]: SVT [build] : Visual Studio 2022 64 bit
Svt[info]: LIB Build date: Dec 27 2023 17:06:37
Svt[info]: -------------------------------------------
avs2pipemod[info]: writing 181 frames of 24000/1001 fps, 1280x528,
sar 0:0, YUV-420-planar-8bit progressive video.
Svt[info]: Number of logical cores available: 4
Svt[info]: Number of PPCS 74
Svt[info]: [asm level on system : up to avx2]
Svt[info]: [asm level selected : up to avx2]
Svt[info]: -------------------------------------------
Svt[info]: SVT [config]: main profile tier (auto) level (auto)
Svt[info]: SVT [config]: width / height / fps numerator / fps denominator : 1280 / 528 / 24000 / 1001
Svt[info]: SVT [config]: bit-depth / color format : 8 / YUV420
Svt[info]: SVT [config]: preset / tune / pred struct : 9 / PSNR / random access
Svt[info]: SVT [config]: gop size / mini-gop size / key-frame type : 161 / 32 / key frame
Svt[info]: SVT [config]: BRC mode / rate factor : CRF / 35
Svt[info]: -------------------------------------------
Encoding avs2pipemod[info]: finished, wrote 75 frames [41%].
avs2pipemod[info]: total elapsed time is 4.679 sec.
avs2pipemod[error]: only wrote 75 of 181 frames.


at StaxRip.Proc.Start() in D:\Code\Github\staxrip\staxrip\Source\General\Proc.vb:line 353
at StaxRip.SvtAv1Enc.Encode(String passName, String commandLine, ProcessPriorityClass priority) in D:\Code\Github\staxrip\staxrip\Source\Encoding\SvtAv1Enc.vb:line 74
at StaxRip.SvtAv1Enc.Encode() in D:\Code\Github\staxrip\staxrip\Source\Encoding\SvtAv1Enc.vb:line 40
at System.Threading.Tasks.Parallel.<>c__DisplayClass4_0.<Invoke>b__0()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at StaxRip.GlobalClass.ProcessJob(String jobPath) in D:\Code\Github\staxrip\staxrip\Source\General\GlobalClass.vb:line 379


I found this among the "detail error message" above. Could this be the problem? Or it was just a symptom of an underlying problem that might be beyond my comprehension as just a normal user?:

Encoding avs2pipemod[info]: finished, wrote 75 frames [41%].
avs2pipemod[info]: total elapsed time is 4.679 sec.
avs2pipemod[error]: only wrote 75 of 181 frames.

StaxRip.ErrorAbortException: Video encoding returned exit code: -1073741795 (0xC000001D)

[Zetti]

Version 2.32.0 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.32.0

[DMD]

Excellent.
I noticed that the DoVi_Tool app has been integrated, I need to figure out how to use it.

[Z'Hadum]

The new function to export HDR Metadata in 2.32 does not work for me.
I imported my settings from previous Version (last I used before was 2.30)

if I open an HDR file I get the following error:

Error Extract Dolby Vision metadata (v2.32.0)

Extract Dolby Vision metadata returned exit code: 2 (0x2)

It's unclear what this exit code means, in case it's
a Windows system error then it possibly means:

# for hex 0x2 / decimal 2
STATUS_WAIT_2 ntstatus.h
ERROR_FILE_NOT_FOUND winerror.h
# The system cannot find the file specified.
# as an HRESULT: Severity: SUCCESS (0), FACILITY_NULL (0x0), Code 0x2
# for hex 0x2 / decimal 2
ERROR_FILE_NOT_FOUND winerror.h
# The system cannot find the file specified.

StaxRip.ErrorAbortException: Extract Dolby Vision metadata returned exit code: 2 (0x2)

It's unclear what this exit code means, in case it's
a Windows system error then it possibly means:

# for hex 0x2 / decimal 2
STATUS_WAIT_2 ntstatus.h
ERROR_FILE_NOT_FOUND winerror.h
# The system cannot find the file specified.
# as an HRESULT: Severity: SUCCESS (0), FACILITY_NULL (0x0), Code 0x2
# for hex 0x2 / decimal 2
ERROR_FILE_NOT_FOUND winerror.h
# The system cannot find the file specified.

at StaxRip.Proc.Start() in D:\Code\Github\staxrip\staxrip\Source\General\Proc.vb:line 353
at StaxRip.MainForm.ExtractDolbyVisionMetadata(Project proj) in D:\Code\Github\staxrip\staxrip\Source\Forms\MainForm.vb:line 3485
at StaxRip.MainForm.ExtractHdrMetadata(Project proj) in D:\Code\Github\staxrip\staxrip\Source\Forms\MainForm.vb:line 3418
at StaxRip.MainForm.OpenVideoSourceFiles(IEnumerable`1 files, Boolean isEncoding) in D:\Code\Github\staxrip\staxrip\Source\Forms\MainForm.vb:line 2242


If I set the Options-> Video -> Extract HDR Metadata to "none"
it seems to work again. Do I miss somthing I have to setup to get HDR MEtadata extraction to work?

[Zetti]

Version 2.33.0 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.33.0

[shodan5000]

The new HDR metadata extraction is super handy. But what if I intend on cropping the video? How can I ensure that the RPU file is also cropped? Is that a function/UI option that needs to created?

[Morku]

I was wondering the same and so got the answer from the Dev:

Dendraspis
—
08.01.2024 15:55
The -crop command is always used. I've tested it with cropped and uncropped encodes and MediaInfo as well as the players were always happy with the outcome. Please tell me if it doesn't work for you.

[shodan5000]

I was wondering the same and so got the answer from the Dev:

Awesome. Thank you for the follow-up.

[Bluedraft]

Hello, I have a problem with staxrip and some denoise filters, every time I try to load smdegrain or mdegrain I get the following error
Script Error

Cannot load file 'C:/Apps/StaxRip-v2.30.0-x64/Apps/Plugins/AVS/AviSynthShader/Shader-x64.dll'. Platform returned code 126:
The specified module could not be found.

The file Shader-x64.dll exist and it's exactly in the path mentioned in the error.
I tried with staxrip 2.28 that worked perfectly in the past with these filters but now I get the same error, also tried with the latest version v2.32 but it happens the same also.
Any idea of what could be happening? I'm using staxrip in Windows 10 64bits.

[Khun_Doug]

I know this is a late reply to the post. It is possible the build of the plugin is not compatible with your CPU. What you can try is renaming the failed plugin to something to save it. Then copy the plugin from the working version and put that in the folder where the newer plugin is failing. You can also check details on the file to see if there is a version difference. My best guess is that something in the compilation is not compatible with your hardware.

An alternate possibility is that some other plugin that shader-x64 requires is missing. You should do some research on the plugin and see if it requires something extra to be functional. It may be that in the previous build that helper dll was included, but was omitted from the build you are using.

[Zetti]

Version 2.34.0 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.34.0

[Bluedraft]

@Khun_Doug Thanks for reply but it has nothing to do with my hardware (Ryzen 7, 32GB, 3060ti with the latest drivers), I've installed all Visual C++ libraries from 2010 to 2022 and latest DirectX and JRE. It's a staxrip problem.

I tried returning to v2.12 and it works perfect, all versions that came after freezes or crash with SMDegrain, MDegrain, CASm LSFMod and probably more filters, at least in my system.
The problem it's related to missing dependencies, it was introduced in v2.13 and apparently not completely fixed in v2.14 (although in the changelog of 2.14 say "Fix AVS SMDegrain not working properly due to missing dependencies (#931)").
A fix for this would be nice though, I'm using Staxrip on Windows 10 64bits.

[lordalibaski]

@Bluedraft

You are not the only person who as seen this happen, I tried it myself a couple of years ago and using any of those filters either froze or crashed staxrip but not all the time which I found strange.

Though I have just tried SMDegrain on the latest version of Staxrip and on the same system Ryzen 7 1st gen 1700 and it froze for about 10 seconds but eventually loaded, but on trying to add the job it froze again for another couple of seconds but did eventually start. I won't be using it because it seems to be a very slow process and I don't really need it when all I do is convert old VHS rips.

[whiteshark99]

hi all i'm using staxrip v2.34

to cut a long story short i had a fresh install of windows 10 now i get this error message when i try to convert to vp9 format.

thanks.


Error Video encoding VP | VP9 (v2.34.0)

Video encoding VP | VP9 returned exit code: -1313558101 (0xB1B4B1AB)


----------------------- Video encoding VP | VP9 -----------------------

ffmpeg N-113112-gf5f414d9c4-x64-gcc13.2.0

"D:\Portable Apps\StaxRip-v2.34.0-x64\Apps\FrameServer\AviSynth\ffmpeg.exe" -i "D:\Converting Testing\Media\John Wick 2 (2017)_temp\John Wick 2 (2017)_new.avs" -c:v libvpx-vp9 -pass 1 -b:v 600k -f rawvideo -passlogfile "D:\Converting Testing\Media\John Wick 2 (2017)_temp\John Wick 2 (2017)_new_2pass" -an -y -hide_banner NUL

[in#0 @ 000001c9f14199c0] Error opening input: Unknown error occurred
Error opening input file D:\Converting Testing\Media\John Wick 2 (2017)_temp\John Wick 2 (2017)_new.avs.
Error opening input files: Unknown error occurred

StaxRip.ErrorAbortException: Video encoding VP | VP9 returned exit code: -1313558101 (0xB1B4B1AB)


----------------------- Video encoding VP | VP9 -----------------------

ffmpeg N-113112-gf5f414d9c4-x64-gcc13.2.0

"D:\Portable Apps\StaxRip-v2.34.0-x64\Apps\FrameServer\AviSynth\ffmpeg.exe" -i "D:\Converting Testing\Media\John Wick 2 (2017)_temp\John Wick 2 (2017)_new.avs" -c:v libvpx-vp9 -pass 1 -b:v 600k -f rawvideo -passlogfile "D:\Converting Testing\Media\John Wick 2 (2017)_temp\John Wick 2 (2017)_new_2pass" -an -y -hide_banner NUL

[in#0 @ 000001c9f14199c0] Error opening input: Unknown error occurred
Error opening input file D:\Converting Testing\Media\John Wick 2 (2017)_temp\John Wick 2 (2017)_new.avs.
Error opening input files: Unknown error occurred


at StaxRip.Proc.Start() in D:\Code\Github\staxrip\staxrip\Source\General\Proc.vb:line 353
at StaxRip.ffmpegEnc.Encode(String args) in D:\Code\Github\staxrip\staxrip\Source\Encoding\ffmpegEnc.vb:line 151
at StaxRip.ffmpegEnc.Encode() in D:\Code\Github\staxrip\staxrip\Source\Encoding\ffmpegEnc.vb:line 134
at System.Threading.Tasks.Parallel.<>c__DisplayClass4_0.<Invoke>b__0()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at StaxRip.GlobalClass.ProcessJob(String jobPath) in D:\Code\Github\staxrip\staxrip\Source\General\GlobalClass.vb:line 379

[Zetti]

Version 2.35.0 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.35.0

[Atlantis]

Man don't install it. So many new bugs with 2.35. It seems they completely broke the parsing file name system.
I'm opening an SDR file and it wants to extract it as Dolby Vision just because I have DELAY in an audio file name!

I'm so frustrated. More and more they break basic necessary stuff that worked correctly before. I will no longer install a new version.
What was the last stable version? I don't remember any more.

I have to say that I have a complete clean install.

[Atlantis]

and now Media Info Source File is added twice to the log

log file:

System Environment
Media Info Source File <----------------
Demux MKV

Configuration
Media Info Source File <----------------
AviSynth Script

I opened a ticket and it was closed immediately not at least allowing it open for few hours for discussion.

He says This is intended as the first one is read out when you open the source file and the second time is when you start the processing.

Which makes no sense to me.

[DMD]

Good morning.
In my configuration with version 2.35 it happened to me 2 times with the x265 encoding during processing crashes.
Also since I set the pc has work at night, I always select the hibernate command for the end of the processes, well even in this case I end up the next morning with a warning message that the processing is terminated at 98.5% and that some frames have not been processed.
Which in the previous version never happened to me, the operating system and the various software did not change.
Today I downgraded to version 2.34 and so far everything is running smoothly
I can't give an explanation and I have no idea why this is happening, this is the first time it has happened with the latest release.

[Khun_Doug]

There are a few possibilities for the error. The first thing I would try is copying the x265.exe from the working version and putting that in place of the version that faults. That would show if x265.exe is the culprit. It's possible there are changes in the newer x265.exe that are tripping up your hardware.

Another thing to check only applies to systems that have been overclocked. It's common that an overclock has not been thoroughly tested. Since x265 can stress the CPU, a faulty overclock can easily break x265. If you are overclocking the CPU / motherboard, I would highly recommend stress testing for stability with tools such as Primes95 and Cinebench. If those crash / fail, the overclock is not stable.

[DMD]

My system is not in overckloc is by default withhardware as in signature.
I did other testing by setting in StaxRip the selection to avx512 and replaced the default installed .exe encoder (avx2) with "3.5+153+15-813ccbff0-.Mod-by-Patman.-x64-avx512-msvc1937" and set the hibernate command as I often do overnight .
I verified for the same file it was faster, about 2% and completed without any problem.
At this point I don't know whether to deselect avx512 and leave Patman's avx2 encoder.
I will do more processing to test stability, and if I still get error messages, however I use a CPU cooler with ARCTIC Liquid Freezer II 280 A-RGB.
By all means, I reserve the right to perform more tests with default encoder (avx2) by unchecking the avx512 option.

https://i.postimg.cc/gcvLwnqh/Immagine-2024-02-10-185955.png

https://i.postimg.cc/43DnygYw/Immagine-2024-02-10-190110.png

[DMD]

There are a few possibilities for the error. The first thing I would try is copying the x265.exe from the working version and putting that in place of the version that faults. That would show if x265.exe is the culprit. It's possible there are changes in the newer x265.exe that are tripping up your hardware.

Another thing to check only applies to systems that have been overclocked. It's common that an overclock has not been thoroughly tested. Since x265 can stress the CPU, a faulty overclock can easily break x265. If you are overclocking the CPU / motherboard, I would highly recommend stress testing for stability with tools such as Primes95 and Cinebench. If those crash / fail, the overclock is not stable.
After several tests and a few days of losing my mind to figure out where the cause was, I discovered via stress test with AIDA64 it was not completing the test on both cache and RAM.
Having 4 memory sticks set to the maximum frequency @6000 MHz despite the EXPO certification (for Ryzen cpu).
By decreasing the frequency @5600MHz the test was passed and the x265 ecoding was completed without problems.
Fortunately so far the system is stable.
I did not think this problem could be caused by RAM instability.
Doing further research I learned that EXPO certification at maximum frequency refers to 2 sticks, using 4 sticks the maximum working frequency must be reduced to ensure system stability.

[Zetti]

Version 2.36.0 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.36.0

[Atlantis]

If we have 2.35, do we have to clean install?

[Zetti]

No idea, i just posted the news here.

[Atlantis]

This is a forum. I'm obviously asking everyone. Anyone who knows. I already copied over my old one. I didn't do clean install this time. We will see.

[Morku]

Please check out the Changelog as always to know what has changed and start with fresh settings to avoid side effects.

When it works, it works. Otherwise test with fresh settings.

[Atlantis]

No problems so far.

[Zetti]

Version 2.37.0 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.37.0

[Joekiwi]

Thanks for the quick updating , and the better handling of DV
Windows Defender canx download from github pointed source - 64 installer as virus detected

[Zetti]

Version 2.37.1 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.37.1

[Spunkmeyer]

Why would DV support be removed from VCencC?

Would be handy to keep as it's much quicker than x265.

[Joekiwi]

Version 2.37.1 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.37.1

Thanks - d/l this one , windows defender didn't kick a sad

[Zetti]

Version 2.37.2 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.37.2

[XadoX]

Since MeGUI seems to be dead, I wanted to try StaxRip.
In MeGUI I had always used the Clever Anamorphic Encoding. Does StaxRip also use anamorphic encoding by default?

[kalehrl]

Not quite dead :)
https://forum.doom9.org/showthread.php?t=185399

[Zetti]

Version 2.37.3 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.37.3

[Zetti]

Version 2.37.4 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.37.4

[NathanX]

Hi everyone,

just downloaded Version 2.37.4 and ran into an error when trying to use SMDegrain: an error "Cannot load file C:/Users/xxx/Desktop/Staxrip-v2.37.4.0-x64/Apps/Plugins/AVS/AVS_LibPlacebo/AVS_libplacebo.dll. Platform returned code 126: Das angegebene Modul wurde nicht gefunden."
Last part in German means: the given module was not found. AVS_libplacebo.dll is there in the path where the error message claims that it can not load the file. I am using Windows Server 2019 64 Bit.
Can anyone help me out?

Thanks a ton!
Nathan

[Guest]

Hi everyone,

just downloaded Version 2.37.4 and ran into an error when trying to use SMDegrain: an error "Cannot load file C:/Users/xxx/Desktop/Staxrip-v2.37.4.0-x64/Apps/Plugins/AVS/AVS_LibPlacebo/AVS_libplacebo.dll. Platform returned code 126: Das angegebene Modul wurde nicht gefunden."
Last part in German means: the given module was not found. AVS_libplacebo.dll is there in the path where the error message claims that it can not load the file. I am using Windows Server 2019 64 Bit.
Can anyone help me out?

Thanks a ton!
Nathan

Maybe replacing that with this, may help...worth a shot.

https://github.com/Asd-g/avslibplacebo/releases/tag/1.5.2

I don't use Staxrip, and I also don't know what version of LibPlacebo is being used, but at least you'll be to date.

There's also been a very recent update of SMDegrain, too.

[Z'Hadum]

Hi,
just realized, that the autocrop is by default only be done on Dolbyvision Content:
This seems to be default since 2.35(?)
("Auto Crop after opening: Dolby Vision Only")

My Question:
What is the reason? In my opinion it makes no sense only to crop Dolbyvision Content
And why is it set to default?
Mistake?

[Havokdan]

https://github.com/staxrip/staxrip/releases/tag/v2.35.0

"This one is an important update for everyone, who also uses sources with Dolby Vision metadata and wants to transfer them to the encode/target properly while cropping the image. As it turned out, a lot of guides and information are wrong, misleading or at least incomplete from a general point of view. It took me hours to get and verify all the information about that topic and develop a way to ensure all different types of sources are treated the right way, so the encode will be as accurate as possible.

Basically almost everything should be straight forward and handled by StaxRip, definitely a lot easier, faster and less error prone than before. Please make sure to run a new instance with new settings and jobs to avoid side effects like lost or changed settings and handling.
(...)"

[mcjordan]

Any suggestions for best NVENC AV1 parameters for encoding 1080p good quality source via StaxRip? Any help will be appreciated. Sorry for inconvenience.

[Zetti]

Version 2.37.5 is released.
https://github.com/staxrip/staxrip/releases/tag/v2.37.5

[redford1974]

------------------------- System Environment -------------------------

StaxRip : v2.37.5
Settings : v2.37.5
Windows : Windows 10 Home 23H2 2009 (22621.1.amd64fre.ni_release.220506-1250)
Language : Polish (Poland)
CPU : Intel(R) Core(TM) i7-14700K
RAM : 32GB
GPU : Intel(R) UHD Graphics 770
Resolution : 2560 x 1440
DPI : 96
Code Page : 1250

----------------- Process Blu-Ray folder using eac3to -----------------

"D:\Narzędzia\StaxRip\Apps\Audio\eac3to\eac3to.exe" "D:\FAST_FURIOUS_8_HDCLUB\BDMV\PLAYLIST"

Source Drive Type: Fixed
1) 00800.mpls, 00245.m2ts, 2:15:57
- Chapters, 21 chapters
- h264/AVC, 1080p24/1.001 (16:9)
- DTS Master Audio, English, multi-channel, 48kHz
- DTS, English, stereo, 48kHz
- DTS, Russian, multi-channel, 48kHz
- DTS, Czech, multi-channel, 48kHz
- DTS, Hungarian, multi-channel, 48kHz
- DTS, Polish, multi-channel, 48kHz
- AC3, English, stereo, 48kHz

----------------- Process playlist file using eac3to -----------------

D:\Narzędzia\StaxRip\Apps\Audio\eac3to\eac3to.exe D:\FAST_FURIOUS_8_HDCLUB\BDMV\PLAYLIST\ 1) -progressnumbers

Running in normal mode
Removing dialnorm
M2TS, 1 video track, 7 audio tracks, 17 subtitle tracks, 2:15:57
1: Chapters, 21 chapters
2: h264/AVC, 1080p24/1.001 (16:9)
3: DTS Master Audio, English, 7.1 channels, 24 bits, 48kHz, dialnorm: 0dB
(core: DTS, 5.1 channels, 1509kbps, 48kHz, dialnorm: 0dB)
4: DTS, English, 2.0 channels, 255kbps, 48kHz, dialnorm: 0dB
5: DTS, Russian, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
6: DTS, Czech, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
7: DTS, Hungarian, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
8: DTS, Polish, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
9: AC3 Surround, English, 2.0 channels, 192kbps, 48kHz, dialnorm: -27dB, -17ms
10: Subtitle (PGS), English
11: Subtitle (PGS), Russian
12: Subtitle (PGS), Czech
13: Subtitle (PGS), Hungarian
14: Subtitle (PGS), Polish
15: Subtitle (PGS), Bulgarian
16: Subtitle (PGS), Estonian
17: Subtitle (PGS), Latvian
18: Subtitle (PGS), Lithuanian
19: Subtitle (PGS), Romanian
20: Subtitle (PGS), Slovenian
21: Subtitle (PGS), Russian
22: Subtitle (PGS), Czech
23: Subtitle (PGS), Hungarian
24: Subtitle (PGS), Polish
25: Subtitle (PGS), English
26: Subtitle (PGS), English

----------------------------- Demux M2TS -----------------------------

eac3to 3.50

D:\Narzędzia\StaxRip\Apps\Audio\eac3to\eac3to.exe D:\FAST_FURIOUS_8_HDCLUB\BDMV\PLAYLIST\ 1) 2: D:\FAST_FURIOUS_8_HDCLUB.h264 3: "D:\FAST_FURIOUS_8_HDCLUB ID1 English.dtsma" 8: "D:\FAST_FURIOUS_8_HDCLUB ID6 Polish.dts" 1: D:\FAST_FURIOUS_8_HDCLUB_chapters.txt 10: "D:\FAST_FURIOUS_8_HDCLUB ID1 English.sup" 14: "D:\FAST_FURIOUS_8_HDCLUB ID5 Polish.sup" -progressnumbers

Running in normal mode
Removing dialnorm
M2TS, 1 video track, 7 audio tracks, 17 subtitle tracks, 2:15:57
1: Chapters, 21 chapters
2: h264/AVC, 1080p24/1.001 (16:9)
3: DTS Master Audio, English, 7.1 channels, 24 bits, 48kHz, dialnorm: 0dB
(core: DTS, 5.1 channels, 1509kbps, 48kHz, dialnorm: 0dB)
4: DTS, English, 2.0 channels, 255kbps, 48kHz, dialnorm: 0dB
5: DTS, Russian, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
6: DTS, Czech, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
7: DTS, Hungarian, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
8: DTS, Polish, 5.1 channels, 768kbps, 48kHz, dialnorm: 0dB
9: AC3 Surround, English, 2.0 channels, 192kbps, 48kHz, dialnorm: -27dB, -17ms
10: Subtitle (PGS), English
11: Subtitle (PGS), Russian
12: Subtitle (PGS), Czech
13: Subtitle (PGS), Hungarian
14: Subtitle (PGS), Polish
15: Subtitle (PGS), Bulgarian
16: Subtitle (PGS), Estonian
17: Subtitle (PGS), Latvian
18: Subtitle (PGS), Lithuanian
19: Subtitle (PGS), Romanian
20: Subtitle (PGS), Slovenian
21: Subtitle (PGS), Russian
22: Subtitle (PGS), Czech
23: Subtitle (PGS), Hungarian
24: Subtitle (PGS), Polish
25: Subtitle (PGS), English
26: Subtitle (PGS), English
Creating file "D:\FAST_FURIOUS_8_HDCLUB_chapters.txt"...
v02 Extracting video track number 2...
a08 Extracting audio track number 8...
a03 Extracting audio track number 3...
s10 Extracting subtitle track number 10...
s14 Extracting subtitle track number 14...
v02 Creating file "D:\FAST_FURIOUS_8_HDCLUB.h264"...
a03 Creating file "D:\FAST_FURIOUS_8_HDCLUB ID1 English.dtsma"...
a08 Creating file "D:\FAST_FURIOUS_8_HDCLUB ID6 Polish.dts"...
s10 Creating file "D:\FAST_FURIOUS_8_HDCLUB ID1 English.sup"...
s14 Creating file "D:\FAST_FURIOUS_8_HDCLUB ID5 Polish.sup"...
Video track 2 contains 195581 frames.
Subtitle track 10 contains 1833 captions.
Subtitle track 14 contains 1517 captions.
eac3to processing took 48 seconds.
Done.

Start: 18:06:01
End: 18:06:50
Duration: 00:00:49

----------------------- Media Info Source File -----------------------

D:\FAST_FURIOUS_8_HDCLUB.h264

General
Complete name : D:\FAST_FURIOUS_8_HDCLUB.h264
Format : AVC
Format/Info : Advanced Video Codec
File size : 22.7 GiB
Overall bit rate mode : Variable
Frame rate : 23.976 FPS

Video
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, Reference frames : 4 frames
Format, Slice count : 4 slices per frame
Bit rate mode : Variable
Maximum bit rate : 33.2 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Time code of first frame : 00:59:59:00

---------------------------- Configuration ----------------------------

Template : Automatic Workflow
Video Encoder : x264Enc
Video Encoder Profile : x264
Container/Muxer Profile : MKV (mkvmerge)
+++++
Process Priority : BelowNormal
Delete Temp Files : Disabled

--------------------------- AviSynth Script ---------------------------

AddAutoloadDir("D:\Narzędzia\StaxRip\Apps\FrameServer\AviSynth\plugins")

LoadPlugin("D:\Narzędzia\StaxRip\Apps\Plugins\Dual\L-SMASH-Works\LSMASHSource.dll")
LWLibavVideoSource("D:\FAST_FURIOUS_8_HDCLUB.h264", cachefile="D:\FAST_FURIOUS_8_HDCLUB.lwi")
Crop(0, 138, -0, -138)

------------------------- Source Script Info -------------------------

Width : 1920
Height : 1080
Frames : 195581
Time : 02:15:57.358
Framerate : 23.976023 (24000/1001)
Format : YUV420P8

------------------------- Target Script Info -------------------------

Width : 1920
Height : 804
Frames : 195581
Time : 02:15:57.358
Framerate : 23.976023 (24000/1001)
Format : YUV420P8

---------------------- Media Info Audio Source 1 ----------------------

General
Complete name : D:\FAST_FURIOUS_8_HDCLUB ID1 English.dtsma
Format : DTS XLL X
Format/Info : Digital Theater Systems
Commercial name : DTS-HD MA + DTS:X
File size : 3.18 GiB
Overall bit rate mode : Variable
FileExtension_Invalid : dts dtshd dtshdma

Audio
Format : DTS XLL X
Format/Info : Digital Theater Systems
Commercial name : DTS-HD MA + DTS:X
Bit rate mode : Variable
Channel(s) : 8 channels
Channel layout : C L R LFE Lb Rb Lss Rss Objects
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 SPF)
Bit depth : 16 bits
Compression mode : Lossless

---------------------- Media Info Audio Source 2 ----------------------

General
Complete name : D:\FAST_FURIOUS_8_HDCLUB ID6 Polish.dts
Format : DTS
Format/Info : Digital Theater Systems
File size : 747 MiB
Duration : 2 h 15 min
Overall bit rate mode : Constant
Overall bit rate : 768 kb/s

Audio
Format : DTS
Format/Info : Digital Theater Systems
Duration : 2 h 15 min
Bit rate mode : Constant
Bit rate : 768 kb/s
Channel(s) : 6 channels
Channel layout : C L R Ls Rs LFE
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 SPF)
Bit depth : 24 bits
Compression mode : Lossy
Stream size : 747 MiB (100%)

------------------------ Error Video encoding ------------------------

x264 0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0

D:\Narzędzia\StaxRip\Apps\Support\avs2pipemod\avs2pipemod64.exe -dll=D:\Narzędzia\StaxRip\Apps\FrameServer\AviSynth\AviSynth.dll -y4mp D:\FAST_FURIOUS_8_HDCLUB.avs | D:\Narzędzia\StaxRip\Apps\Encoders\x264\x264.exe --crf 20 --profile high --level 4.1 --demuxer y4m --frames 195581 --output D:\FAST_FURIOUS_8_HDCLUB_out.h264 -

avs2pipemod[info]: writing 195581 frames of 24000/1001 fps, 1920x804,
sar 0:0, YUV-420-planar-8bit progressive video.
y4m [INFO]: 1920x804 0:0 @ 24000/1001 fps (cfr)
y4m [INFO]: color matrix: undef
x264 [INFO]: AVC Encoder x264 core 164 r3186+8 53164ba [Mod by Patman]
x264 [INFO]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
x264 [INFO]: profile: High, level: 4.1, subsampling: 4:2:0, bit-depth: 8-bit
x264 [INFO]: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=25 lookahead_threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=23 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=20.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
avs2pipemod[info]: total elapsed time is 223.859 sec.
avs2pipemod[error]: only wrote 45099 of 195581 frames.

Video encoding returned exit code: -1073741819 (0xC0000005)

Start: 18:08:04
End: 18:11:49
Duration: 00:03:44
The problem occurs with the assumed processor offset

[guest]

redford1974

A HUGE first post, without really stating anything.

So I wouldn't be too surprised if it might be this:-

Narzędzia (which means instruments or tools)

[NathanX]

Maybe replacing that with this, may help...worth a shot.

https://github.com/Asd-g/avslibplacebo/releases/tag/1.5.2

I don't use Staxrip, and I also don't know what version of LibPlacebo is being used, but at least you'll be to date.

There's also been a very recent update of SMDegrain, too.

Thanks a lot for your reply. Staxrip already includes the very recent version of avslibplacebo.

Found out two interesting things:
1. Staxrip 2.24 does not need avslibplacebo for SMDegrain
2. Staxrip 2.37.4 using SMDegrain works without an issue on my other machine (Windows 10, different kind of CPU)

So this might be simply a platform thing. So I found a solution, at least for the moment.

NathanX