StaxRip

[Disturbance]

Hello, I love your work on StaxRip it is my go to encoder as it just does just about everything. Just a quick question, I have tried searching this thread to see if it had been posted before and could find nothing. I am just seeing if there will possibly be any functionality in helping to facilitate Ordered Chapters at all, somewhat like how V.A.F.E. does it (below) mainly "Generate OC Template from Trims"

http://forum.doom9.org/attachment.php?attachmentid=15421&stc=1&d=1464925209

either via chapters or manually being able to set a time/frame, as the only way I have found to do it via staxrip is to add a
"--qpfile "Filepath\frames.txt" to the options to select which frames to make I frames so that it helps cutting without missing where I want cut. Thanks for your time

[stax76]

@luigizaninoni

I finally found it, you were right that the language caused it. It was added with the 'Demux Audio' option (All, None, Preferred, Show Dialog)

@Disturbance

You can make a feature request on the github issue tracker. I don't really have any experience with chapters, a request that is easy to comprehend with great details has a higher chance to be accepted.

[luigizaninoni]

@luigizaninoni

I finally found it, you were right that the language caused it. It was added with the 'Demux Audio' option (All, None, Preferred, Show Dialog)


Good ! happy you found the bug :)

[ismail0100]

not important but must to say onedrives link not working

[stax76]

not important but must to say onedrives link not working

I generated a new link.

[RainyDog]

Hi stax, is it possible to get this LOTR: Fellowship of the Ring colour correction script (http://www.howtogeek.com/238725/how-to-fix-the-green-tint-in-the-lord-of-the-rings-fellowship-of-the-ring-extended-edition-blu-ray/) working through staxrip? I've tried to pipe it in a few ways but no joy.

Thanks.

[stax76]

Hi stax, is it possible to get this LOTR: Fellowship of the Ring colour correction script (http://www.howtogeek.com/238725/how-to-fix-the-green-tint-in-the-lord-of-the-rings-fellowship-of-the-ring-extended-edition-blu-ray/) working through staxrip? I've tried to pipe it in a few ways but no joy.

Thanks.

At least one of the used plugins isn't available as x64, because StaxRip and all video processing tools StaxRip uses are x64, x86 DLLs can not be loaded and used, I'm sorry.

[luigizaninoni]

Hi stax, is it possible to get this LOTR: Fellowship of the Ring colour correction script (http://www.howtogeek.com/238725/how-to-fix-the-green-tint-in-the-lord-of-the-rings-fellowship-of-the-ring-extended-edition-blu-ray/) working through staxrip? I've tried to pipe it in a few ways but no joy.

Thanks.

At least one of the used plugins isn't available as x64, because StaxRip and all video processing tools StaxRip uses are x64, x86 DLLs can not be loaded and used, I'm sorry

This should allow to insert an avisynth32 plugin inside an avs+64 script. It's rather complex, though:

http://forum.doom9.org/showthread.php?p=1668295#post1668295

[ismail0100]

I generated a new link.
Thank u

[marax]

Hello

here is my log:

I have trouble encoding h.265 using CUDA. (Btw. Cuda is working OK with Sony Vegas 12 for h.264) . Can somebody help me.

Here is log

http://pastebin.com/LQNreSsL

[stax76]

@marax

Please see my signature.

[marax]

@marax

Please see my signature.

Done, I hope it is ok now

[stax76]

Done, I hope it is ok now

Is this the full log file?

[marax]

Is this the full log file?


that is error message

[stax76]

I need the full log file.

[marax]

Here is full log

http://pastebin.com/rrwAvMHq

[stax76]

Here is full log

http://pastebin.com/rrwAvMHq

For H.265 encoding you need minimum a Maxwell gen2 card.

https://stax76.gitbooks.io/staxrip-handbook/content/system-requirements.html

[stax76]

A new stable release (1.3.6.0) is available:

https://github.com/stax76/StaxRip/releases

New Features


added setting to prevent the StaxRip window to become the active foreground window if certain applications are currently in the foreground
added new option to disable audio and subtitle demuxing
added subtitle formats column to MediaInfo Folder View
added all missing x265 switches
added hardware decoding methods to x265 'Other' tab, this will bypass AviSynth though
added new standalone mkvextract GUI (Apps > Demux)
added new QSVEncC switches for hard coded subtitles
added MP4 support to standalone demux app
added -avsinfo starting AVSMeter without a source opened
added support for unicode filenames using VapourSynth, AviSynth don't support it
added mkv cutting support without encoding
added MSharpen x64 filter for AviSynth+ x64
added x264 10-Bit support, binary is not included, StaxRip will ask for the location
added ffmpeg codecs x264, x265 and ProRes
added codec help menu to ffmpeg options dialog which shows help for the currently selected codec, it displayes the output queried with 'ffmpeg -h encoder=name'
added option to define preferred audio languages
added audio and subtitle demuxing modes 'Show Dialog', 'Preferred', 'All', 'None'
added x265 changes for v1.9 183
added new option to automatically add hard coded subtitle
added option to define JPEG compression quality in 'Preview > Save JPG' and thumbnail generator


Fixed Bugs


custom switches were missing in the Intel Quick Sync encoding GUI for QSVEncC
fixed crash with ass file by replacing VSFilter with VSFilterMod


Tweaks


the batch audio profile uses now always batch execution, the PATH variable knows the location of ffmpeg, eac3to and BeSweet, the temp files directory is set as current directory, if input files is empty all files are excepted
the search feature of the apps dialog searches now also the supported filters of plugins
enabled audio demuxing using MP4Box for mov files
removed mkvinfo.exe which is 18 MB large and not really needed. It's large due to QT toolkit being used
mkv audio demuxing happens now all streams together instead of every stream separate, it's much faster now.
changed filter profiles editor to support both tab and 4 spaces for multiline profiles, tabs are converted to 4 spaces which is the standard in Python and Visual Studio
log file improvements
filters list view did not accept drag and drop with source files
enabled posibility to remux mov to mp4
the apps dialog writes the customized versions now to the settings folder so it don't matter if the startup folder has no write access
demuxed subtitles are now detected by ID with proper numeric order
improved Dolby Atmos handling
added check if enough disk space is available before a job runs
replaced drop down menus in Event Commands editor with menu based drop downs


Updated Tools


ffmpeg 2016-04-25
mkvtoolnix 9.2.0
MP4Box 0.6.2
mvsfunc 7
mvtools2 2.7.0.22
nnedi3 0.9.4.21
StaxRip Toolbox Demux 1.1
yadifmod2 0.0.4
AviSynth 1858
NVEncC 2.07
L-SMASH-Works 879
QSVEncC 2.50
qaac 2.59
x265 1.9 200
AVSMeter 2.2.8
MediaInfo 0.7.86
x264 2694

[marax]

Guys,

I have video 1440x1080. How can I put correct PAR and DAR to encode it without resizing to 1080p (1920x1080).

I can't make ti to work without resizing, it gives me always resolution 1400x1080. I am going crazy, I can't get it to work properly.




http://p42i.imgup.net/Image00946f0.jpg

[stax76]

Guys,

I have video 1440x1080. How can I put correct PAR and DAR to encode it without resizing to 1080p (1920x1080).

I can't make ti to work without resizing, it gives me always resolution 1400x1080. I am going crazy, I can't get it to work properly.




http://p42i.imgup.net/Image00946f0.jpg

You don't have to do any change for this!

[IbrahimKh]

added MSharpen x64 filter for AviSynth+ x64
added x264 10-Bit support, binary is not included, StaxRip will ask for the location

Thank you for tbis

[Magik Mark]

Hi Stax,

I'm getting a trojan warning on qaac64 & refalac64. I hope its just a false positive

Thanks

[jlpsvk]

@Stax76
I am getting "No enough free space" when I want to start encode. And I have 60G free space on the destination drive.

[marax]

You don't have to do any change for this!


when I encode it it does not make 1920x1080p video but still 1440x1080:

Video
ID : 1
Format : hvc1
Codec ID : hvc1
Duration : 34mn 6s
Bit rate mode : Variable
Bit rate : 3 020 Kbps
Maximum bit rate : 9 482 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate mode : Constant
Frame rate : 25.000 fps

I guess I must change something in PAR and DAR but I don't know which value to get proper 16/9 1920x1080 video

[stax76]

I'm getting a trojan warning on qaac64 & refalac64. I hope its just a false positive

It's unlikely that it contains malware, if you are worried you can contact qaac support.

@marax

open your source, post screenshots of the main dialog and the video encoder options dialog and as usual post the full log file after you encoded.

If you don't change any aspect ratio related value which you shouldn't unless you know exactly what you are doing which most users don't then you should see:

main dialog > source group > source PAR > 4:3

main dialog > resize group > target PAR > 4:3

video encoder options dialog > command line preview > PAR 4:3 is signaled

I am getting "No enough free space" when I want to start encode. And I have 60G free space on the destination drive.

Next build will fix it:

fixed the check for enough free space on the disk of the target file, instead of three times the source file one time is now enough

[burfadel]

When doing batch encoding with 1.3.6.0, I get the following message no matter what I do:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
_________ __ __________.__
/ _____// |______ ___ __\______ \__|_____
\_____ \\ __\__ \ \ \/ /| _/ \____ \
/ \| | / __ \_> < | | \ | |_> >
/_______ /|__| (____ /__/\_ \|____|_ /__| __/
\/ \/ \/ \/ |__|

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Environment
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

StaxRip x64 : 1.3.6.0
OS : Windows 10 Pro Insider Preview
Language : English (Australia)
CPU : Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz
GPU : Intel(R) HD Graphics 4000, AMD Radeon R9 200 Series

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Exception
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The path is not of a legal form.
at System.IO.Path.LegacyNormalizePath(String path, Boolean fullCheck, Int32 maxPathLength, Boolean expandShortPaths)
at System.IO.Path.GetPathRoot(String path)
at System.IO.DriveInfo..ctor(String driveName)
at StaxRip.MainForm.RunJobRecursive() in D:\Projekte\GitHub\staxrip\Forms\MainForm.vb:line 3444
at StaxRip.MainForm.StartJobs() in D:\Projekte\GitHub\staxrip\Forms\MainForm.vb:line 3430
at StaxRip.MainForm.ShowJobsDialog() in D:\Projekte\GitHub\staxrip\Forms\MainForm.vb:line 3416
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Reflection.MethodBase.Invoke(Object obj, Object[] parameters)
at StaxRip.CommandManager.Process(Command command, List`1 params) in D:\Projekte\GitHub\staxrip\General\General.vb:line 1291
at StaxRip.CommandManager.Process(String name, List`1 params) in D:\Projekte\GitHub\staxrip\General\General.vb:line 1282
at StaxRip.UI.CustomMenu.Process(CustomMenuItem item) in D:\Projekte\GitHub\staxrip\UI\Menu Types.vb:line 232
at StaxRip.UI.CustomMenu.OnCommand(CustomMenuItem item) in D:\Projekte\GitHub\staxrip\UI\Menu Types.vb:line 225
at StaxRip.UI.CustomMenu.MenuClick(Object sender, EventArgs e) in D:\Projekte\GitHub\staxrip\UI\Menu Types.vb:line 217
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
at StaxRip.UI.MenuItemEx.OnClick(EventArgs e) in D:\Projekte\GitHub\staxrip\UI\Menu Types.vb:line 402
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

If I add the files manually they work fine. Also I retried 1.3.2.0 in a separate location (the 1828 Avisynth), worked fine. Tried the 1.3.6.0 in a new location, again fail (Avisynth 1858). I was using the build from 29 May? (not the 03 June build), and that had been working fine.

Also if I click "Demux and Index before creating jobs" it also works. It's just incovenient if you are batch encoding numerous jobs and you have to wait for it.

[stax76]

Sorry guys, the new free disk space check had 3 issues.


fixed the check for enough free space on the disk of the target file, instead of three times the source file one time is now enough
fixed crash StaxRip checking for enough free space in file batch mode and if target directory is network share


https://github.com/stax76/staxrip/blob/master/md/test-build.md

[ismail0100]

Exception

Audio encoding using qaac 2.59 x64 failed with exit code: 2 (0x2)

The exit code might be a system error code: STATUS_WAIT_2

The exit code might be a system error code: Sistem belirtilen dosyayı bulamıyor.

ERROR: CoreAudioToolbox.dll: Belirtilen modül bulunamadı.



StaxRip.ErrorAbortException: Audio encoding using qaac 2.59 x64 failed with exit code: 2 (0x2)

The exit code might be a system error code: STATUS_WAIT_2

The exit code might be a system error code: Sistem belirtilen dosyayı bulamıyor.

ERROR: CoreAudioToolbox.dll: Belirtilen modül bulunamadı.


konum: StaxRip.Proc.Start() D:\Projekte\GitHub\staxrip\General\Proc.vb içinde: satır 232
konum: StaxRip.GUIAudioProfile.Encode() D:\Projekte\GitHub\staxrip\General\AudioProfile.vb içinde: satır 642
konum: StaxRip.MainForm.ExecuteAudio(AudioProfile ap) D:\Projekte\GitHub\staxrip\Forms\MainForm.vb içinde: satır 5545
konum: StaxRip.MainForm._Closure$__432-0._Lambda$__7() D:\Projekte\GitHub\staxrip\Forms\MainForm.vb içinde: satır 5531
konum: StaxRip.UI.ActionMenuItem.OnClick(EventArgs e) D:\Projekte\GitHub\staxrip\UI\Menu Types.vb içinde: satır 460
konum: System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
konum: System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
konum: System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
konum: System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
konum: System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
konum: System.Windows.Forms.Control.WndProc(Message& m)
konum: System.Windows.Forms.ToolStrip.WndProc(Message& m)
konum: System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
konum: System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

[IbrahimKh]

When doing batch encoding with 1.3.6.0, I get the following message no matter what I do:

If I add the files manually they work fine. Also I retried 1.3.2.0 in a separate location (the 1828 Avisynth), worked fine. Tried the 1.3.6.0 in a new location, again fail (Avisynth 1858). I was using the build from 29 May? (not the 03 June build), and that had been working fine.

Also if I click "Demux and Index before creating jobs" it also works. It's just incovenient if you are batch encoding numerous jobs and you have to wait for it.

Yea I got this error too.
http://s33.postimg.org/pkt17pqj3/Capture.png

[burfadel]

Yea I got this error too.
---
@Stax any chance adding deinterlacing filter to next release?

It's good now it's fixed. BTW thanks Stax!

[NikosD]

The new Intel's MediaSDK v1.19 is out and the release notes contain some interesting information:

QSV-FF (FixedFunction-LowPower mode) limitations:

o Only I and P frame types supported, so no API related to B frames encoding support.
o CQP, CBR, VBR and QVBR rate control methods only.
o Supported QP values range: 10-51
o Only progressive encoding supported.

HW Accelerated HEVC Encode supports only CQP, CBR, VBR and ICQ rate control methods and supports maximum resolution 3840x2172 and Intel improved CPU utilization for synchronous pipeline and fixed delays in asynchronous pipeline.

HW Accelerated HEVC Encode supports MAIN10 profile only starting 7th generation Intel Core platforms (Kabylake)

VPP
Added mirroring filter support for horizontal flip.

I believe all of the above new features will be supported by QSVEncC in near future.

[Magik Mark]

Stax,

Is it possible just to make changes in the Audio and not to reencode the video? Made a mistake on the audio. Video is OK. If Im going to rencode everything it would take several hours again

[IbrahimKh]

Stax,

Is it possible just to make changes in the Audio and not to reencode the video? Made a mistake on the audio. Video is OK. If Im going to rencode everything it would take several hours again

http://s33.postimg.org/nn5z9x0gv/Capture.png

[LordVako]

Im getting this error

(25,1): error CS0656: Missing compiler required member 'Microsoft.CSharp.RuntimeBinder.CSharpArgumentInfo.Create'

when trying to configure staxrip for HDR encoding... I go to source, select vapoursynth then when I go to tools > scripts and select https://i.imgur.com/xirxezU.png im getting that error... Any ideas how to fix it? thanks

[Magik Mark]

http://s33.postimg.org/nn5z9x0gv/Capture.png

Silly me. Thanks

[Magik Mark]

Guys,

Is there a way for us to use fdk-aac? Does it have to be harcoded in staxrip to be used?

[Pulp Catalyst]

Hello,

I'm trying to add this in Vapursynth mode (i have downloaded it from https://github.com/HomeOfVapourSynthEvolution/VapourSynth-Yadifmod/releases)

yadifmod = yadifmod.Yadifmod(clip, edeint=nnedi3.nnedi3(clip), mode=1)

and also

yadifmod = clip = yadifmod.Yadifmod(clip, edeint=nnedi3.nnedi3(clip), mode=1)

but it's not working,

can anyone help me add this to the profile.

i want yadifmod + nnedi3 in 50fps mode.

the error is "yadifmod is not defined".

appreciate any help on this.

thanks,

sorry this is my profile... i forgot to add

Yadifmod =
clip = core.std.LoadPlugin(r"D:\Program Files\StaxRip 1.3.6.0\Apps\Plugins\vs\yadifmod\Yadifmod.dll")
clip = Yadifmod(clip, edeint=nnedi3.nnedi3(clip), mode=1)


and this is the code preview

import vapoursynth as vs
core = vs.get_core()
core.std.LoadPlugin(r"D:\Program Files\StaxRip 1.3.6.0\Apps\Plugins\both\ffms2\ffms2.dll")
core.std.LoadPlugin(r"D:\Program Files\StaxRip 1.3.6.0\Apps\Plugins\both\KNLMeansCL\KNLMeansCL.dll")
core.std.LoadPlugin(r"D:\Program Files\StaxRip 1.3.6.0\Apps\Plugins\vs\nnedi3\libnnedi3.dll")
clip = core.ffms2.Source(r"F:\DISCS\MAKEMKV\Dads Army\title00 1 (1).mkv", cachefile = r"E:\Temp\title00 1 (1)_temp\title00 1 (1).ffindex")
clip = core.std.LoadPlugin(r"D:\Program Files\StaxRip 1.3.6.0\Apps\Plugins\vs\yadifmod\Yadifmod.dll")
clip = Yadifmod(clip, edeint=nnedi3.nnedi3(clip), mode=1)
clip = core.knlm.KNLMeansCL(clip, d = 1, a = 1, h = 2)
clip.set_output()

[Yups]

The new Intel's MediaSDK v1.19 is out and the release notes contain some interesting information:

QSV-FF (FixedFunction-LowPower mode) limitations:

o Only I and P frame types supported, so no API related to B frames encoding support.
o CQP, CBR, VBR and QVBR rate control methods only.
o Supported QP values range: 10-51
o Only progressive encoding supported.

HW Accelerated HEVC Encode supports only CQP, CBR, VBR and ICQ rate control methods and supports maximum resolution 3840x2172 and Intel improved CPU utilization for synchronous pipeline and fixed delays in asynchronous pipeline.

HW Accelerated HEVC Encode supports MAIN10 profile only starting 7th generation Intel Core platforms (Kabylake)

VPP
Added mirroring filter support for horizontal flip.

I believe all of the above new features will be supported by QSVEncC in near future.


The limitations of HEVC and fixed Function are not new.

I'm interested in the QPOffset per pyramid layer for HEVC.

[LordVako]

Im getting this error

(25,1): error CS0656: Missing compiler required member 'Microsoft.CSharp.RuntimeBinder.CSharpArgumentInfo.Create'

when trying to configure staxrip for HDR encoding... I go to source, select vapoursynth then when I go to tools > scripts and select https://i.imgur.com/xirxezU.png im getting that error... Any ideas how to fix it? thanks

Can anyone help me here please?

[NikosD]

Frank,

1) Could you add a VP9 FFMPEG encoder build with 10bit support ?

2) Is it possible to add bit depth support information in your "MediaInfo Folder View" ?

Thanks

[Vulpix]

@stax76 , changing the name of the output file does some weird stuff. It causes about 0.5-1s delay for each typed character, and a new file is generated for everything I write. Didn't behave this way in the previous release.

Below, you can see what happened when I changed the name from "Test Encode H26b0" to "Test Encode H26bnotune22-12plac"


http://i.imgur.com/ByjQZrQ.png

[LordVako]

Im getting this error

(25,1): error CS0656: Missing compiler required member 'Microsoft.CSharp.RuntimeBinder.CSharpArgumentInfo.Create'

when trying to configure staxrip for HDR encoding... I go to source, select vapoursynth then when I go to tools > scripts and select https://i.imgur.com/xirxezU.png im getting that error... Any ideas how to fix it? thanks

Jesus Lord, anybody knows how to fix this? how to set up staxrip to do HDR encoding with the new release. was working fine with the old one, now it does not want to work. PLEASE HELP.

[NikosD]

I'm interested in the QPOffset per pyramid layer for HEVC.

The new QSVEncC v2.51 has partial support of API v1.19 using latest v4454 driver for Skylake, including offset value of QP

Added an option to specify the quality of resizing by vpp ·. --vpp-scaling <string> simple, slightly faster when you select simple.

Added an optional mirror image reversal by vpp ·. Mirror---Vpp <String> H, V "V" if the vertical direction, "h" If the transverse direction.

Added --qp-offset to specify the offset value of QP for each hierarchy of the pyramid reference.

[stax76]

Im getting this error

(25,1): error CS0656: Missing compiler required member 'Microsoft.CSharp.RuntimeBinder.CSharpArgumentInfo.Create'

when trying to configure staxrip for HDR encoding... I go to source, select vapoursynth then when I go to tools > scripts and select https://i.imgur.com/xirxezU.png im getting that error... Any ideas how to fix it? thanks

What Windows version, .NET version and CPU do you use?

@Pulp Catalyst

The usage is described here:

https://github.com/HomeOfVapourSynthEvolution/VapourSynth-Yadifmod

yadifmod.Yadifmod(clip clip, clip edeint, int order[, int field=-1, int mode=0])

Is there a way for us to use fdk-aac? Does it have to be harcoded in staxrip to be used?

audio profiles menu > edit profiles > add > command line

changing the name of the output file does some weird stuff. It causes about 0.5-1s delay for each typed character, and a new file is generated for everything I write. Didn't behave this way in the previous release.

Below, you can see what happened when I changed the name from "Test Encode H26b0" to "Test Encode H26bnotune22-12plac"

There was code added some weeks ago that is meant to prevent this behavior, it's the first time I see that it don't work in every circumstance, please see my signature.

Audio encoding using qaac 2.59 x64 failed with exit code: 2 (0x2)

The exit code might be a system error code: STATUS_WAIT_2

The exit code might be a system error code: Sistem belirtilen dosyayı bulamıyor.

ERROR: CoreAudioToolbox.dll: Belirtilen modül bulunamadı.

What do the non English parts mean?

v4454 driver for Skylake

I cannot find this driver.

[easyfab]

I cannot find this driver.

http://www.station-drivers.com/index.php?option=com_remository&Itemid=352&func=fileinfo&id=2217&lang=en

[stax76]

http://www.station-drivers.com/index.php?option=com_remository&Itemid=352&func=fileinfo&id=2217&lang=en

Why isn't it available on Intel's website?

[Leo 69]

It is available: https://downloadcenter.intel.com/product/88350/Intel-HD-Graphics-P530

[stax76]

It is available: https://downloadcenter.intel.com/product/88350/Intel-HD-Graphics-P530

But only for Xeon.

[NikosD]

I edited a previous post that was writing completely different things with a new one.

So, in case you missed it, is there any feedback on this ?



Frank,

1) Could you add a VP9 FFMPEG encoder build with 10bit support ?

2) Is it possible to add bit depth support information in your "MediaInfo Folder View" ?

Thanks

[Vulpix]

There was code added some weeks ago that is meant to prevent this behavior, it's the first time I see that it don't work in every circumstance, please see my signature.


The log is here:
http://pastebin.com/7ALVQsRN

But I doubt it has any relevant information.

However, I noticed it doesn't happen until I do anything that calls video processing.

For example -> creating new project, nothing. Modifying cutting/etc filters -> no problem.

BUT

Compressibility check (regardless of whether you finish or cancel it) -> once you run it, the behavior occurs
OR
After you start an encode (regardless of whether you finish or cancel it) -> if you try to change the name after you encode, this happens again.

I sometimes do encode comparisons where I have one source and then I just encode it, then change the codec option and add something to the name (like b12 to signify 12bit encode) and then just hit next to encode again and have two files to compare. This "bug" manifests exactly when you do that and so it happens on my pc 100% of the time.

The log captures the following:

Creation of "Test" encode, running a compressibility check and then renaming the output file to Testabcdefgh.mkv (from just "Test.mkv"):

http://i.imgur.com/TGUvXbW.png