StaxRip

[Revan654]

AviSynth


Ok. Is there a way to force "Outpod Mod = 16" even if the cropped image is not Mod16 but with borders added it is?

options -> OutputMode: Mod16

There are allot of filters function that exist but they are just not added to context menu.

Also check the Appmenu to see if a filter is still active.

--------

TDeint has to be used manually until it gets re-added to the app.

A bunch of source code got lost in early September, It could have been in there and I just couldn't remember all the filters were lost and added as much as I could recall and missed that one.

[Revan654]

Is it possible to have an queue looks like Handbrake, vidcoder?
Current i can make an job and start the encode. After that, i must start a new staxrip process to add new job.
Is it possible to have only one staxrip process open and not two?

You can add all your jobs first or do batch queue. You only need to open a second one if encoding process has already started.

Once a job is added to the queue from the second one it will transfer to other, You can simple close the second one once you added all your jobs. StaxRip was designed differently, Could such a feature be added (Maybe). The Software HandBrake and StaxRip runs on are very different as well.

[FreaQ]

options -> OutputMode: Mod16

There are allot of filters function that exist but they are just not added to context menu.

Also check the Appmenu to see if a filter is still active.

I kow that option.
If it is set to Mod16 and the cropping size is Mod4, StaxRip doesn't let me skip the warning until I set it to Mod4.
But the image size is Mod16 with AddBorders and I want to force it.

[FreaQ]

ProjectX is also missing.
I tried top copy the ProjectX folder from StaxRip 1.7.0.6 but 1.9.0.0 still crashes.

[Patman]

Hi Revan,

first thanks a lot for continuing the development of Staxrip. I use DGDecNV for indexing. With version 1.8.2.0 everything was fine, but since version 1.9.0.0 i've got an error.

DirectoryNotFoundException (1.9.0.0)

Ein Teil des Pfades "..." konnte nicht gefunden werden.

System.IO.DirectoryNotFoundException: Ein Teil des Pfades "..." konnte nicht gefunden werden.
bei System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
bei System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
bei System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
bei System.IO.StreamWriter.CreateFile(String path, Boolean append, Boolean checkHost)
bei System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize, Boolean checkHost)
bei System.IO.File.InternalWriteAllText(String path, String contents, Encoding encoding, Boolean checkHost)
bei StaxRip.StringExtensions.WriteFile(String value, String path, Encoding encoding) in C:\Users\Revan\Desktop\staxrip-1.8.2.0\General\Extensions.vb:Zeile 303.

Can you help?

Greetz Pat

[Revan654]

ProjectX is also missing.
I tried top copy the ProjectX folder from StaxRip 1.7.0.6 but 1.9.0.0 still crashes.

Project X has been completely removed from StaxRip.

All traces of it has been removed. Project X was never a required App, It can't crash StaxRip.

[Revan654]

Hi Revan,

first thanks a lot for continuing the development of Staxrip. I use DGDecNV for indexing. With version 1.8.2.0 everything was fine, but since version 1.9.0.0 i've got an error.



Can you help?

Greetz Pat

I don't speak German, from what I gathered, it's likely to do with MediaInfo or your security settings.

Most issues popping up with StaxRip is all tied to MediaInfo 18.08 or improper user Rights(MS Hijacking Folder Rights).

[Patman]

Medainfo is Version 18.05

Gesendet von meinem G8141 mit Tapatalk

[Revan654]

Medainfo is Version 18.05

Gesendet von meinem G8141 mit Tapatalk

If you downgraded then it's it's FileAccess issue. I need the logs to see what happened :logfile: .

[FreaQ]

Project X has been completely removed from StaxRip.

All traces of it has been removed. Project X was never a required App, It can't crash StaxRip.

I used it for SDTV captures. It is ok if you removed it, but I copied my settings over to 1.9.0 and it was selected as preprocessing app.
So StaxRip crashed because of an obsolete app and configuration.

[K.i.N.G]

I noticed that when I encode a 6.1 (DTSHD-MA) track to AAC 6.1 (using qaac) that the back channels (BL BC BR) aren't correct.
The FLAC one (that gets made before it gets converted to AAC) seems to be correct though.

[Revan654]

I used it for SDTV captures. It is ok if you removed it, but I copied my settings over to 1.9.0 and it was selected as preprocessing app.
So StaxRip crashed because of an obsolete app and configuration.

You should delete the settings file for each new release, Only the templates need to be moved over if you have any. That Folder has been renamed.

Settings and such files have been changed starting with 1.9.

Working with old .dat files is going create problems.

Not sure what ProjectX does that programs like VirtualDub2 can't do. If your willing to pay VideoReDo. There also programs written in python that can do what Project X does.

[Revan654]

I noticed that when I encode a 6.1 (DTSHD-MA) track to AAC 6.1 (using qaac) that the back channels (BL BC BR) aren't correct.
The FLAC one (that gets made before it gets converted to AAC) seems to be correct though.

It's likely MediaInfo again, Plus Audio settings have not been touched since 1.7.

[K.i.N.G]

It's likely MediaInfo again, Plus Audio settings have not been touched since 1.7.

So, does that mean its safe to ignore and they are most-likely correct anyway?

I could test/play it using foobar2000 to see it gives the correct result? (since it doesnt use mediainfo afaik)

[Revan654]

So, does that mean its safe to ignore and they are most-likely correct anyway?

I could test/play it using foobar2000 to see it gives the correct result? (since it doesnt use mediainfo afaik)

Allot of issues right now is tied to buggy MediaInfo 18.08+ versions. All the bugs inside latest version has produced some very amusing results.

Download the old 18.05 version and it should be all corrected, Maybe one day I will look at all MediaInfo code and see what needs to be done to convert it over to FFMpeg-Probe. It might be worth doing. For now Everything is based around MediaInfo Since it's very easy to add MediaInfo Flags to the Source Code.

What Audio Encoders are being Used for these processes? The Switches have not changed inside any of the audio encoders to my knowledge, Most are passed to or through FFMPEG for the Encoding process. I would try Opus audio and see if you get the same results.

Before you start the jobs check the audio command line and see if it matches up with the Flags in the audio encoder menu.

[Khun_Doug]

I am trying to look at a preview of an HD source. There are three filters besides the Source. They are Crop, mClean, and Prefetch. The source opens fine and crops fine. When I click Preview I get an error from AviSynth that reads AviSynth returned empty image data. Once I okay that the preview remains black, but the scene is not black. Attempting to step forward one frame renders an error message at the top of the Preview window. The error is CAVIStreamSynth: System exception - Access Violation at 0x00007FFA46215299.

The log in the temp folder for the source shows nothing indicating any error. I don't see any other to submit. Is there something that needs to be toggled to capture more logging info?

Incidentally, the image opens fine and previews fine in the older 1.7.0.6 version.

[Patman]

I need the logs to see what happened :logfile: .

Hi Revan,

here are my log files:
Staxrip 1.8.2.0

-------------------------- System Environment --------------------------

StaxRip : 1.8.2.0
Windows : Windows 10 Pro 1803
Language : German (Germany)
CPU : Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
GPU : NVIDIA GeForce GTX 1070
Resolution : 1920 x 1080
DPI : 96

------------------------ MediaInfo Source File ------------------------

E:\x264\abc.mkv

General
Complete name : E:\x264\abc.mkv
Format : Matroska
Format version : Version 2
File size : 16.5 GiB
Duration : 1 h 25 min
Overall bit rate mode : Variable
Overall bit rate : 27.7 Mb/s
Encoded date : UTC 2018-09-12 16:41:36
Writing application : mkvmerge v3.4.0 ('Rapunzel') built on May 15 2010 09:38:20
Writing library : libebml v0.8.0 + libmatroska v0.9.0

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, ReFrames : 4 frames
Muxing mode : Container profile=@0.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 1 h 25 min
Bit rate mode : Variable
Maximum bit rate : 38.0 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Language : German
Default : Yes
Forced : Yes

Audio
ID : 3
Format : DTS
Format/Info : Digital Theater Systems
Format profile : MA / Core
Codec ID : A_DTS
Duration : 1 h 25 min
Bit rate mode : Variable / Constant
Bit rate : Unknown / 1 509 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 SPF)
Bit depth : 24 bits
Compression mode : Lossless / Lossy
Language : German
Default : No
Forced : No

Text
ID : 2
Format : VobSub
Muxing mode : zlib
Codec ID : S_VOBSUB
Codec ID/Info : Picture based subtitle format used on DVDs
Language : German
Default : Yes
Forced : No

Menu
00 : 00:00.000 : en:00:00:00.000
00 : 10:43.017 : en:00:10:43.017
00 : 19:41.138 : en:00:19:41.138
00 : 28:32.586 : en:00:28:32.586
00 : 39:39.043 : en:00:39:39.043
00 : 49:30.342 : en:00:49:30.342
00 : 59:25.270 : en:00:59:25.270
01 : 09:26.829 : en:01:09:26.829
01 : 18:22.364 : en:01:18:22.364

-------------- Demux xml chapters using mkvextract 26.0.0 --------------

F:\VideoProgz\Staxrip\Apps\MKVToolNix\mkvextract.exe E:\x264\abc\abc.mkv chapters E:\x264\abc\abc...._temp\abc_chapters.xml

File 'E:\x264\abc\abc.mkv': container: Matroska
Track ID 0: video (MPEG-4p10/AVC/h.264)
Track ID 1: subtitles (VobSub)
Track ID 2: audio (DTS-HD Master Audio)
Chapters: 9 entries

Start: 21:59:36
End: 21:59:36
Duration: 00:00:00

-------------- Demux ogg chapters using mkvextract 26.0.0 --------------

F:\VideoProgz\Staxrip\Apps\MKVToolNix\mkvextract.exe E:\x264\abc\abc.mkv chapters E:\x264\abc\abc...._temp\abc_chapters.txt --simple

File 'E:\x264\abc\abc.mkv': container: Matroska
Track ID 0: video (MPEG-4p10/AVC/h.264)
Track ID 1: subtitles (VobSub)
Track ID 2: audio (DTS-HD Master Audio)
Chapters: 9 entries

Start: 21:59:36
End: 21:59:36
Duration: 00:00:00

-------- DGIndexNV: Index, No Demux using DGIndexNV 2053 (159) --------

F:\VideoProgz\Staxrip\Apps\DGIndexNV\DGIndexNV.exe -i "E:\x264\abc\abc.mkv" -o "E:\x264\abc\abc...._temp\abc.dgi" -h

Project

Start: 21:59:36
End: 22:01:27
Duration: 00:01:50



Staxrip 1.9.0.0

-------------------------- System Environment --------------------------

StaxRip : 1.9.0.0
Windows : Windows 10 Pro 1803
Language : German (Germany)
CPU : Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
GPU : NVIDIA GeForce GTX 1070
Memory : 1 GB
Resolution : 1920 x 1080
DPI : 96

------------------------ MediaInfo Source File ------------------------

E:\x264\abc\abc.mkv

General
Complete name : E:\x264\abc\abc.mkv
Format : Matroska
Format version : Version 2
File size : 16.5 GiB
Duration : 1 h 25 min
Overall bit rate mode : Variable
Overall bit rate : 27.7 Mb/s
Encoded date : UTC 2018-09-12 16:41:36
Writing application : mkvmerge v3.4.0 ('Rapunzel') built on May 15 2010 09:38:20
Writing library : libebml v0.8.0 + libmatroska v0.9.0

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, ReFrames : 4 frames
Muxing mode : Container profile=@0.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 1 h 25 min
Bit rate mode : Variable
Maximum bit rate : 38.0 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Language : German
Default : Yes
Forced : Yes

Audio
ID : 3
Format : DTS
Format/Info : Digital Theater Systems
Format profile : MA / Core
Codec ID : A_DTS
Duration : 1 h 25 min
Bit rate mode : Variable / Constant
Bit rate : Unknown / 1 509 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 SPF)
Bit depth : 24 bits
Compression mode : Lossless / Lossy
Language : German
Default : No
Forced : No

Text
ID : 2
Format : VobSub
Muxing mode : zlib
Codec ID : S_VOBSUB
Codec ID/Info : Picture based subtitle format used on DVDs
Language : German
Default : Yes
Forced : No

Menu
00 : 00:00.000 : en:00:00:00.000
00 : 10:43.017 : en:00:10:43.017
00 : 19:41.138 : en:00:19:41.138
00 : 28:32.586 : en:00:28:32.586
00 : 39:39.043 : en:00:39:39.043
00 : 49:30.342 : en:00:49:30.342
00 : 59:25.270 : en:00:59:25.270
01 : 09:26.829 : en:01:09:26.829
01 : 18:22.364 : en:01:18:22.364

-------------- Demux xml chapters using mkvextract 26.0.0 --------------

F:\VideoProgz\Staxrip\Apps\MKVToolNix\mkvextract.exe E:\x264\abc\abc.mkv chapters E:\x264\abc\abc_temp\abc_chapters.xml

File 'E:\x264\abc\abc.mkv': container: Matroska
Track ID 0: video (MPEG-4p10/AVC/h.264)
Track ID 1: subtitles (VobSub)
Track ID 2: audio (DTS-HD Master Audio)
Chapters: 9 entries

Error: The file 'E:\x264\abc\abc_temp\abc_chapters.xml' could not be opened for writing: open file error.

Start: 22:10:58
End: 22:10:58
Duration: 00:00:00

-------------- Demux ogg chapters using mkvextract 26.0.0 --------------

F:\VideoProgz\Staxrip\Apps\MKVToolNix\mkvextract.exe E:\x264\abc\abc.mkv chapters E:\x264\abc\abc_temp\abc_chapters.txt --simple

File 'E:\x264\abc\abc.mkv': container: Matroska
Track ID 0: video (MPEG-4p10/AVC/h.264)
Track ID 1: subtitles (VobSub)
Track ID 2: audio (DTS-HD Master Audio)
Chapters: 9 entries

Error: The file 'E:\x264\abc\abc_temp\abc_chapters.txt' could not be opened for writing: open file error.

Start: 22:10:58
End: 22:10:58
Duration: 00:00:00

-------- DGIndexNV: Index, No Demux using DGIndexNV 2053 (159) --------

F:\VideoProgz\Staxrip\Apps\DGDecNV\DGIndexNV.exe -i "E:\x264\abc\abc.mkv" -o "E:\x264\abc\abc_temp\abc.dgi" -h

Project

Start: 22:10:58
End: 22:15:38
Duration: 00:04:39

------------------------- Error opening source -------------------------

Import: unable to open "E:\x264\abc\abc_temp\abc_new_source.avs" (path invalid?), error=0x0

LoadPlugin("F:\VideoProgz\Staxrip\Apps\DGIndexNV\DGDecodeNV.dll")
DGSource("E:\x264\abc\abc_temp\abc.dgi")


In this two cases, i use all files from Staxrip 1.9.0.0. I only changed the Staxrip.exe. Mediainfo is version 18.05.

[Revan654]

I am trying to look at a preview of an HD source. There are three filters besides the Source. They are Crop, mClean, and Prefetch. The source opens fine and crops fine. When I click Preview I get an error from AviSynth that reads AviSynth returned empty image data. Once I okay that the preview remains black, but the scene is not black. Attempting to step forward one frame renders an error message at the top of the Preview window. The error is CAVIStreamSynth: System exception - Access Violation at 0x00007FFA46215299.

The log in the temp folder for the source shows nothing indicating any error. I don't see any other to submit. Is there something that needs to be toggled to capture more logging info?

Incidentally, the image opens fine and previews fine in the older 1.7.0.6 version.

The debugging Logger in StaxRip is broken(Stax76 never really fully added a full debugger). It never really provided any useful information. I have to check the VB docs to see what the best method to add a new Debug Logger that would output useful data. Shame it doesn't have auto-logger feature like Python does.

Don't upload Images Here, It takes days for them to get approved.

It's mClean, The AVS Script has issues and they were never corrected. I doubt we will see any kind of fix for it unless someone wants to re-code mclean.

Nothing I can really do about that since it's a filter issue.

[Digga]

hi there Revan654!

I tried the new 1.9 version (didn't import any settings and started fresh).
however, the resulting output is played in slow motion (exactly half of the normal playback speed).
I checked the output with VLC and MPC-HC (newest versions), as well on my TV. I feel a little uncomfortable here, maybe I overlooked something? I used the same settings that worked for me for ages, so I guess it might be someting in the new version that is causing this...
Encoding from the same source with StaxRip v1.7.0.5 results in a perfectly fine encode. Btw, checking the raw video output before muxing shows the same slow motion effect.
If I can provide any further information I will gladly do so.

I tried to copy n paste a shortened log here, but the system tells me it is much too long. so I attached it.
*edit: while pending approval, here's the log: https://www31.zippyshare.com/v/134yRkBm/file.html

thanks for your time!

[FreaQ]

Please post the log in the code-tags (code)Log(/code)

If this is a HDTV-capture from MDR or RBB, did you use Field -> SelectEven?

[Digga]

Please post the log in the code-tags (code)Log(/code)I tried that when I posted, but still got the 'too long' error: 'The text that you have entered is too long (XXXXX characters). Please shorten it to 16000 characters long.'
*edit: I uploaded the log to an external hoster, see the OP.

If this is a HDTV-capture from MDR or RBB, did you use Field -> SelectEven?the source is a BR disc (interlaced, TFF), so I used yadifmod2.

[Revan654]

hi there Revan654!

I tried the new 1.9 version (didn't import any settings and started fresh).
however, the resulting output is played in slow motion (exactly half of the normal playback speed).
I checked the output with VLC and MPC-HC (newest versions), as well on my TV. I feel a little uncomfortable here, maybe I overlooked something? I used the same settings that worked for me for ages, so I guess it might be someting in the new version that is causing this...
Encoding from the same source with StaxRip v1.7.0.5 results in a perfectly fine encode. Btw, checking the raw video output before muxing shows the same slow motion effect.
If I can provide any further information I will gladly do so.

I tried to copy n paste a shortened log here, but the system tells me it is much too long. so I attached it.
*edit: while pending approval, here's the log: https://www31.zippyshare.com/v/134yRkBm/file.html

thanks for your time!

It's very possible it's tied to MediaInfo, MediaInfo sending incorrect data for Subtitles or audio which is causing the video to slow down.

You could try to update your x264 as well to see if that helps as well.

Take a look at your command line then compare to the old one and see if anything has changed. Does it happen with other codecs as well?

x264 Flags have not been changed, It shouldn't be anything at that end. It's likely tied to subtitles or MKV header, which Mediainfo is very buggy atm.

The Only thing that looks off from the log file is the aspect ratio.

Lastly I would check the extracted source file(File from the Blu-Ray) and see if it plays slowly as well. Try to use mpv or PotPlayer, just in-case VLC is having issues.

[animeXL]

Hello, I've been wrestling with an issue since reinstalling Windows. I cannot get any version of Staxrip to import using VapourSynth. This is the only way I have been able to get Hardcoded subtitles to render with 10 bit video. I've tried uninstalling/reinstalling Python and VS several times as well as several versions of Staxrip all with the same result. Any guidance would be most appreciated.

Log:

-------------------------- System Environment --------------------------

StaxRip : 1.9.0.0
Windows : Windows 10 Pro 1809
Language : English (United States)
CPU : AMD Ryzen 7 2700X Eight-Core Processor
GPU : NVIDIA GeForce GTX 1060
Memory : 1 GB
Resolution : 2880 x 1800
DPI : 192

------------------------ MediaInfo Source File ------------------------

C:\Users\User\Videos\Test File 1440p HDR10.mkv

General
Complete name : C:\Users\User\Videos\Test File 1440p HDR10.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 122 MiB
Duration : 2 min 50 s
Overall bit rate : 5 990 kb/s
Movie name : Test File 1440p HDR10
Encoded date : UTC 2018-10-04 18:49:16
Writing application : mkvmerge v15.0.0 ('Duel with the Devil') 64-bit
Writing library : libebml v1.3.5 + libmatroska v1.4.5
Writing frontend : StaxRip v1.7.0.0

Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main 10@L5@Main
Codec ID : V_MPEGH/ISO/HEVC
Duration : 2 min 50 s
Bit rate : 5 978 kb/s
Width : 2 560 pixels
Height : 1 440 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Bits/(Pixel*Frame) : 0.068
Stream size : 122 MiB (100%)
Writing library : x265 2.5+14-2718cb5dd67f:[Windows][GCC 7.1.0][64 bit] 10bit
Default : Yes
Forced : No
Color range : Limited
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
Mastering display color primaries : R: x=0.680000 y=0.320000, G: x=0.265000 y=0.690000, B: x=0.150000 y=0.060000, White point: x=0.312700 y=0.329000
Mastering display luminance : min: 0.0050 cd/m2, max: 1000.0000 cd/m2

Text #1
ID : 2
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Duration : 2 s 211 ms
Bit rate : 31.5 kb/s
Count of elements : 2
Stream size : 8.50 KiB (0%)
Language : English
Default : No
Forced : Yes

Text #2
ID : 3
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Duration : 2 min 34 s
Bit rate : 29.5 kb/s
Count of elements : 74
Stream size : 557 KiB (0%)
Language : English
Default : No
Forced : No



------------------ Demux MKV using mkvextract 26.0.0 ------------------

C:\Users\User\Downloads\Compressed\StaxRip-x64-1.9.0.0\Apps\MKVToolNix\mkvextract.exe "C:\Users\User\Videos\Test File 1440p HDR10.mkv" tracks 1:"C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10 ID2 English_forced.sup" 2:"C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10 ID3 English.sup" --ui-language en

Extracting track 1 with the CodecID 'S_HDMV/PGS' to the file 'C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10 ID2 English_forced.sup'. Container format: SUP
Extracting track 2 with the CodecID 'S_HDMV/PGS' to the file 'C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10 ID3 English.sup'. Container format: SUP

Start: 2:37:31 PM
End: 2:37:31 PM
Duration: 00:00:00

-------------- Demux xml chapters using mkvextract 26.0.0 --------------

C:\Users\User\Downloads\Compressed\StaxRip-x64-1.9.0.0\Apps\MKVToolNix\mkvextract.exe "C:\Users\User\Videos\Test File 1440p HDR10.mkv" chapters "C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10_chapters.xml"

File 'C:\Users\User\Videos\Test File 1440p HDR10.mkv': container: Matroska
Track ID 0: video (MPEG-H/HEVC/h.265)
Track ID 1: subtitles (HDMV PGS)
Track ID 2: subtitles (HDMV PGS)
Chapters: 36 entries
Global tags: 1 entry

Start: 2:37:31 PM
End: 2:37:31 PM
Duration: 00:00:00

-------------- Demux ogg chapters using mkvextract 26.0.0 --------------

C:\Users\User\Downloads\Compressed\StaxRip-x64-1.9.0.0\Apps\MKVToolNix\mkvextract.exe "C:\Users\User\Videos\Test File 1440p HDR10.mkv" chapters "C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10_chapters.txt" --simple

File 'C:\Users\User\Videos\Test File 1440p HDR10.mkv': container: Matroska
Track ID 0: video (MPEG-H/HEVC/h.265)
Track ID 1: subtitles (HDMV PGS)
Track ID 2: subtitles (HDMV PGS)
Chapters: 1 entries
Global tags: 1 entry

Start: 2:37:31 PM
End: 2:37:31 PM
Duration: 00:00:00

---------------------- Script file failed to load ----------------------

Source File Path: C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10_new_source.vpy
import vapoursynth as vs
core = vs.get_core()
core.std.LoadPlugin(r"C:\Users\User\Downloads\Compressed\StaxRip-x64-1.9.0.0\Apps\Plugins\both\ffms2\ffms2.dll")
clip = core.ffms2.Source(r"C:\Users\User\Videos\Test File 1440p HDR10.mkv", cachefile = r"C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10.ffindex")
clip.set_output()
Plugin directory is missing!

------------------------- Error opening source -------------------------

AVIFileOpen failed to execute

Failed to open VapourSynth script:

C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10_new_source.vpy

You can try to open the script with VirtualDub x64, if it don't open it could be a problem with the script or the VapourSynth x64 setup, if StaxRip don't report a script error and the script looks valid then reinstalling VapourSynth x64 might fix the problem.

import vapoursynth as vs
core = vs.get_core()
core.std.LoadPlugin(r"C:\Users\User\Downloads\Compressed\StaxRip-x64-1.9.0.0\Apps\Plugins\both\ffms2\ffms2.dll")
clip = core.ffms2.Source(r"C:\Users\User\Videos\Test File 1440p HDR10.mkv", cachefile = r"C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10.ffindex")
clip.set_output()

---------------------- Script file failed to load ----------------------

Source File Path: C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10_new_source.vpy
import vapoursynth as vs
core = vs.get_core()
core.std.LoadPlugin(r"C:\Users\User\Downloads\Compressed\StaxRip-x64-1.9.0.0\Apps\Plugins\both\ffms2\ffms2.dll")
clip = core.ffms2.Source(r"C:\Users\User\Videos\Test File 1440p HDR10.mkv", cachefile = r"C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10.ffindex")
clip.set_output()
Plugin directory is missing!

------------------------------ Exception ------------------------------

System.Exception: AVIFileOpen failed to execute

Failed to open VapourSynth script:

C:\Users\User\Videos\Test File 1440p HDR10_temp\Test File 1440p HDR10_new_source.vpy

You can try to open the script with VirtualDub x64, if it don't open it could be a problem with the script or the VapourSynth x64 setup, if StaxRip don't report a script error and the script looks valid then reinstalling VapourSynth x64 might fix the problem.
at StaxRip.AVIFile..ctor(String path) in C:\Users\Revan\Desktop\staxrip-1.8.2.0\General\AVIFile.vb:line 50
at StaxRip.VideoScript.Synchronize(Boolean convertToRGB, Boolean comparePath) in C:\Users\Revan\Desktop\staxrip-1.8.2.0\General\VideoScript.vb:line 202
at StaxRip.GlobalClass.IsValidSource(Boolean warn) in C:\Users\Revan\Desktop\staxrip-1.8.2.0\General\GlobalClass.vb:line 647
at StaxRip.MainForm.AviSynthListView_ScriptChanged() in C:\Users\Revan\Desktop\staxrip-1.8.2.0\Forms\MainForm.vb:line 5181
at StaxRip.FiltersListView.OnChanged() in C:\Users\Revan\Desktop\staxrip-1.8.2.0\Controls\FiltersListView.vb:line 224
at StaxRip.FiltersListView._Lambda$__14-0(VideoScript script) in C:\Users\Revan\Desktop\staxrip-1.8.2.0\Controls\FiltersListView.vb:line 31
at StaxRip.VideoScript.RaiseChanged() in C:\Users\Revan\Desktop\staxrip-1.8.2.0\General\VideoScript.vb:line 23
at StaxRip.MainForm.OpenVideoSourceFiles(IEnumerable`1 files, Boolean isEncoding) in C:\Users\Revan\Desktop\staxrip-1.8.2.0\Forms\MainForm.vb:line 2079

[Revan654]

Hello, I've been wrestling with an issue since reinstalling Windows. I cannot get any version of Staxrip to import using VapourSynth. This is the only way I have been able to get Hardcoded subtitles to render with 10 bit video. I've tried uninstalling/reinstalling Python and VS several times as well as several versions of Staxrip all with the same result. Any guidance would be most appreciated.



python & Filters must be in the path. It's a real PIA sometimes to make sure everything is intact since how VS is coded and how python works.

if your using R44 = Python 3.6
if your using R45 = Python 3.7

You can not mix and match.

if your using R44 you can also try anaconda (This is what I use).

Link: https://www.anaconda.com/download/

import vapoursynth as vs
core = vs.get_core()
import importlib.machinery #Only needed for py scripts.
core.std.LoadPlugin(r"C:\Users\Revan\Desktop\staxrip-1.8.2.0\bin\x64\Apps\Plugins\vs\vslsmashsource\vslsmashsource.dll")
clip = core.lsmas.LibavSMASHSource(r"Path to Source.mp4")
clip.set_output()

[Digga]

You could try to update your x264 as well to see if that helps as well.AFAIK StaxRip v1.9 already uses the latest x264 version (r2932)... I reverted back to r2901 to see if that changes anything - to no avail.

btw, there seem to happen quite some heavy bitrate management changes with x264 since the last two releases. r2901 went down on overall bitrate usage, and now r2932 continues this trend, wow. looks fine to me though so far at a casual glance

Take a look at your command line then compare to the old one and see if anything has changed. Does it happen with other codecs as well?the cmdline is the same. I encoded the same source with x265 and it shows the same slowdown.

Lastly I would check the extracted source file(File from the Blu-Ray) and see if it plays slowly as well....plays perfectly normal.

[baal77]

Hello Revan654,

Thanks for your last release ! Nice job !

I've a question now I see that you've add the Apps/MediaInfo/MKVHDR metedatas options, do you think it's possible to add another option (or just get the way to do it manually in command line) to REMOVE HDR data.

Indeed, I've inconveniently encoded a video with HDR metatags (set by default in your precedent version) whereas I've used dghdrtosdr() filter to transform HDR video into SDR, and downgrade colors from 10 to 8bits (so x265 is playable by a Rasp Pi2, while video bitrate stay low <2Mbps), and audio "simple" like 5.1 in Opus 1.2 for exemple).

This video is technically in BT.709 8bits now, but tagged with HDR metadata, ALL THE VIDEO IS OVERSATURATED IN RED TONES when played by any device/software able to interprate such metadata (most of them).

As I don't want to reencode this video because it takes around 50 hours to encode it, I hope it's just possible to remove this fucking metatags I missed to modify BEFORE the click on "Start".

Can you help me ?

[imhh11]

I had the same issue when I did my first hdr to sdr conversion. I now have to set manually these flags to bt709 before I start the encode or they stay by default to:



https://extraimage.net/images/2018/10/06/aba09ee03acabff340bff822148d9c8d.png






EDIT: i found how to make it automatic.
create a template with your hdr to sdr script and go to option/video and uncheck ''import VUI''. then go in the VUI tab, put the 3 BT709 flags and just save the template, no more hdr flags and nothing to do manually anymore :D

[Revan654]

Hello Revan654,

Thanks for your last release ! Nice job !

I've a question now I see that you've add the Apps/MediaInfo/MKVHDR metedatas options, do you think it's possible to add another option (or just get the way to do it manually in command line) to REMOVE HDR data.

What you want can already be done through mkvmerge. The values are up to you since I have no way to judge your source and tell what will work.

These are the Base values of HDR, So you can start there and tweak them to your colorspace.

mkvmerge -o Newfile.mkv --colour-matrix 0:9 --colour-range 0:1 --colour-transfer-characteristics 0:16 --colour-primaries 0:9 --max-content-light 0:1000 --max-frame-light 0:300 --max-luminance 0:1000 --min-luminance 0:0.01 --chromaticity-coordinates 0:0.68,0.32,0.265,0.690,0.15,0.06 --white-colour-coordinates 0:0.3127,0.3290 inputfile.mkv

As I don't want to reencode this video because it takes around 50 hours to encode it, I hope it's just possible to remove this fucking metatags I missed to modify BEFORE the click on "Start".

Can you help me ?

If it takes 50 hours to encode, Might want to consider getting a new PC.

[minda76]

Hello,
I’m using dgdecnv with staxrip and after latest update when i load indexed file and start encode not all hdr10 info appear like “mastering display” etc. Is it related to vui import? Mediainfo?

[videoh]

when i load indexed file What does this mean? You load the Avisynth script, the DGI file, or the actual source file?

[minda76]

What does this mean? You load the Avisynth script, the DGI file, or the actual source file?

I load dgi file and when encode starts not all hdr10 parameters are imported from dgi file like “mastering display”.

[videoh]

From what you posted at DG's forum it sounds like MediaInfo has a problem. First check that the info is in fact in the DGI file. Then use MediaInfo directly (not through StaxRip) on the DGI file and see if it reports the info.

[minda76]

From what you posted at DG's forum it sounds like MediaInfo has a problem. First check that the info is in fact in the DGI file. Then use MediaInfo directly (not through StaxRip) on the DGI file and see if it reports the info.

Info is in dgi file, checked, info is in source file, don’t know how to check dgi file with media info. “Mastering display” is not present in the encoded file.

[videoh]

OK, then you will need to get help from the StaxRip guys.

[DaMacFunkin]

Does anybody have a guide on how to set up staxrip to re-encode 2160p 10 bit HDR-10 to 2160p 10 bit HDR-10 using Nvenc?
Thank you for any help given.

[Revan654]

Hello,
I’m using dgdecnv with staxrip and after latest update when i load indexed file and start encode not all hdr10 info appear like “mastering display” etc. Is it related to vui import? Mediainfo?

VUI will only import Rec 2020.

Like I said in the doc. VUI will only load if the colorspace is BT.2020. Anything else gets rejected. There just to many colorspaces to build functions for ever one, Even though HDR10 docs clearly states only Rec.2020 is HDR. For some reason some studios don't fully convert to proper colorspace and leave it in P3(Which is a giant mistake). It also didn't help that MediaInfo keeps simplifying there readout. I tried to get the old readout back a few times before main dev didn't want to go back to that setup. That is the reason why allot of VUI data does not import correctly.

Apps -> MediaInfo. It Will give you the readout of what has been imported or what will be imported.

You can also use MKVinfo for more detail readout if the file is mkv.

VUI Import is just a copy function for the Metadata to Codec, to make things easier. All the metadata still loads into StaxRip, it's just doesn't copy colorspaces & other data over if it doesn't pass all the checks.

[FreaQ]

hi there Revan654!

I tried the new 1.9 version (didn't import any settings and started fresh).
however, the resulting output is played in slow motion (exactly half of the normal playback speed).
I checked the output with VLC and MPC-HC (newest versions), as well on my TV. I feel a little uncomfortable here, maybe I overlooked something? I used the same settings that worked for me for ages, so I guess it might be someting in the new version that is causing this...
Encoding from the same source with StaxRip v1.7.0.5 results in a perfectly fine encode. Btw, checking the raw video output before muxing shows the same slow motion effect.
If I can provide any further information I will gladly do so.

I tried to copy n paste a shortened log here, but the system tells me it is much too long. so I attached it.
*edit: while pending approval, here's the log: https://www31.zippyshare.com/v/134yRkBm/file.html

thanks for your time!

Today I encountered the same problem.
I was reencoding a HDTV capture which resulted in a slow downed video. Audio is playing at the correct speed. Also the target and source video play at the same frame rate and have the same duration.

I reencoded the source video in StaxRip 1.7.0.6 and everything is fine.

Find attached logs from both versions in following posts

[FreaQ]

1.9.0.0 1/2

-------------------------- System Environment --------------------------

StaxRip : 1.9.0.0
Windows : Windows 10 Home 1803
Language : German (Germany)
CPU : Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
GPU : Intel(R) HD Graphics 530, NVIDIA GeForce GTX 950M
Memory : 1 GB
Resolution : 1920 x 1080
DPI : 96

------------------------ MediaInfo Source File ------------------------

D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts

General
ID : 1055 (0x41F)
Complete name : D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts
Format : MPEG-TS
File size : 862 MiB
Duration : 21 min 8 s
Overall bit rate mode : Variable
Overall bit rate : 5 701 kb/s

Video
ID : 255 (0xFF)
Menu ID : 5500 (0x157C)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, ReFrames : 4 frames
Codec ID : 27
Duration : 21 min 7 s
Bit rate : 5 032 kb/s
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 FPS
Standard : Component
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan type, store method : Separated fields
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.129
Stream size : 761 MiB (88%)
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio
ID : 259 (0x103)
Menu ID : 5500 (0x157C)
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : 6
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : 8 ms
Stream size : 58.0 MiB (7%)
Language : German
Language, more info : Clean effects
Service kind : Complete Main

------------- ffmpeg: Re-mux TS to MKV using ffmpeg 4.0.2 -------------

"D:\_Programme\_Portable\Staxrip 1.9.0.0\Apps\ffmpeg\ffmpeg.exe" -i "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts" -c:a copy -c:v copy -sn -y -hide_banner "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv"

[h264 @ 000001bfd9a62100] mmco: unref short failure
Last message repeated 2 times
[h264 @ 000001bfd9a62100] Increasing reorder buffer to 2
Input #0, mpegts, from 'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts':
Duration: 00:21:07.88, start: 86541.948111, bitrate: 5703 kb/s
Program 5500
Stream #0:0[0xff]: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25 fps, 50 tbr, 90k tbn, 50 tbc
Stream #0:1[0x103](deu): Audio: ac3 ([6][0][0][0] / 0x0006), 48000 Hz, 5.1(side), fltp, 384 kb/s (clean effects)
Output #0, matroska, to 'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv':
Metadata:
encoder : Lavf58.12.100
Stream #0:0: Video: h264 (High) (H264 / 0x34363248), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], q=2-31, 25 fps, 50 tbr, 1k tbn, 90k tbc
Stream #0:1(deu): Audio: ac3 ([0] [0][0] / 0x2000), 48000 Hz, 5.1(side), fltp, 384 kb/s (clean effects)
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Stream #0:1 -> #0:1 (copy)
Press [q] to stop, [?] for help
video:796842kB audio:59438kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.090459%

Start: 13:48:47
End: 13:48:53
Duration: 00:00:05

------------------ Demux MKV using mkvextract 26.0.0 ------------------

"D:\_Programme\_Portable\Staxrip 1.9.0.0\Apps\MKVToolNix\mkvextract.exe" "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv" tracks 1:"D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3" --ui-language en

Extracting track 1 with the CodecID 'A_AC3' to the file 'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3'. Container format: Dolby Digital (AC-3)

Start: 13:48:53
End: 13:48:54
Duration: 00:00:00

General
Complete name : D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3
Format : AC-3
Format/Info : Audio Coding 3
File size : 58.0 MiB
Duration : 21 min 8 s
Overall bit rate mode : Constant
Overall bit rate : 384 kb/s

Audio
Format : AC-3
Format/Info : Audio Coding 3
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 58.0 MiB (100%)
Service kind : Complete Main

----------------------- Indexing using ffmsindex -----------------------

"D:\_Programme\_Portable\Staxrip 1.9.0.0\Apps\Plugins\both\ffms2\ffmsindex.exe" "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv" "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ffindex"

Writing index... done.

Start: 13:48:54
End: 13:48:56
Duration: 00:00:01

--------------------------- AviSynth Script ---------------------------

LoadCPlugin("D:\_Programme\_Portable\Staxrip 1.9.0.0\Apps\Plugins\both\ffms2\ffms2.dll")
FFVideoSource("D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv", colorspace = "YV12", \
cachefile = "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ffindex")

-------------------------- Script Properties --------------------------

Source Frame Count : 31697
Source Frame Rate : 25.000000
Source Duration : 00:21:07.8800000
Target Frame Count : 31697
Target Frame Rate : 25.000000
Target Duration : 00:21:07.8800000

----------------------- MediaInfo Audio Source 1 -----------------------

General
Complete name : D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3
Format : AC-3
Format/Info : Audio Coding 3
File size : 58.0 MiB
Duration : 21 min 8 s
Overall bit rate mode : Constant
Overall bit rate : 384 kb/s

Audio
Format : AC-3
Format/Info : Audio Coding 3
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 58.0 MiB (100%)
Service kind : Complete Main

-------------------- Video encoding using x264 2932 --------------------

"D:\_Programme\_Portable\Staxrip 1.9.0.0\Apps\x264\x264.exe" --crf 19 --preset slow --tune animation --profile main --level 4.1 --trellis 1 --8x8dct --no-fast-pskip --subme 9 --me umh --bframes 3 --ref 4 --min-keyint 25 --sar 255:191 --threads 34 --lookahead-threads 5 --deblock -1:-1 --output "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_out.h264" "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.avs"

avs [info]: 1440x1080p 255:191 @ 25/1 fps (cfr)
x264 [info]: using SAR=255/191
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
x264 [info]: profile Main, level 4.1, 4:2:0, 8-bit
x264 [info]: frame I:199 Avg QP:13.73 size:134263
x264 [info]: frame P:8450 Avg QP:17.19 size: 23247
x264 [info]: frame B:23048 Avg QP:21.16 size: 2167
x264 [info]: consecutive B-frames: 0.8% 6.0% 1.7% 91.4%
x264 [info]: mb I I16..4: 46.3% 0.0% 53.7%
x264 [info]: mb P I16..4: 8.7% 0.0% 4.6% P16..4: 34.6% 8.9% 4.5% 0.0% 0.0% skip:38.6%
x264 [info]: mb B I16..4: 0.2% 0.0% 0.2% B16..8: 14.7% 0.7% 0.1% direct: 0.4% skip:83.7% L0:53.4% L1:43.5% BI: 3.2%
x264 [info]: direct mvs spatial:99.9% temporal:0.1%
x264 [info]: coded y,uvDC,uvAC intra: 43.1% 71.9% 35.8% inter: 3.5% 8.3% 1.3%
x264 [info]: i16 v,h,dc,p: 38% 22% 12% 28%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 26% 15% 21% 5% 7% 8% 6% 6% 6%
x264 [info]: i8c dc,h,v,p: 28% 28% 28% 16%
x264 [info]: Weighted P-Frames: Y:0.2% UV:0.2%
x264 [info]: ref P L0: 63.9% 6.8% 19.8% 9.5% 0.0%
x264 [info]: ref B L0: 89.9% 7.8% 2.2%
x264 [info]: ref B L1: 97.2% 2.8%
x264 [info]: kb/s:1723.18
encoded 31697 frames, 38.40 fps, 1723.18 kb/s

Start: 13:48:57
End: 14:02:43
Duration: 00:13:45

[FreaQ]

1.9.0.0 2/2
General
Complete name : D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_out.h264
Format : AVC
Format/Info : Advanced Video Codec
File size : 260 MiB
Writing library : x264 core 157 r2932 303c484

Video
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.1
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, ReFrames : 4 frames
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 157 r2932 303c484

--------------------- Muxing using mkvmerge 26.0.0 ---------------------

"D:\_Programme\_Portable\Staxrip 1.9.0.0\Apps\MKVToolNix\mkvmerge.exe" -o "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv" "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_out.h264" --audio-tracks 0 --language 0:ger --sync 0:11 --default-track 0:0 --forced-track 0:0 "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3" --global-tags "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_tags.xml" --ui-language en

mkvmerge v26.0.0 ('In The Game') 64-bit
'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_out.h264': Using the demultiplexer for the format 'AVC/h.264'.
'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3': Using the demultiplexer for the format 'AC-3'.
'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_out.h264' track 0: Using the output module for the format 'AVC/h.264 (unframed)'.
'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3' track 0: Using the output module for the format 'AC-3'.
The file 'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv' has been opened for writing.
'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_out.h264' track 0: Extracted the aspect ratio information from the MPEG-4 layer 10 (AVC) video data and set the display dimensions to 1923/1080.
The cue entries (the index) are being written...
Multiplexing took 2 seconds.

Start: 14:02:43
End: 14:02:45
Duration: 00:00:01

General
Complete name : D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 319 MiB
Duration : 21 min 8 s
Overall bit rate : 2 109 kb/s
Encoded date : UTC 2018-10-12 12:02:43
Writing application : mkvmerge v26.0.0 ('In The Game') 64-bit
Writing library : libebml v1.3.6 + libmatroska v1.4.9
Writing frontend : StaxRip v1.9.0.0

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.1
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, ReFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 21 min 7 s
Bit rate : 1 723 kb/s
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Original display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.044
Stream size : 260 MiB (82%)
Writing library : x264 core 157 r2932 303c484
Default : Yes
Forced : No

Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : 11 ms
Stream size : 58.0 MiB (18%)
Language : German
Service kind : Complete Main
Default : No
Forced : No

----------------------------- Job Complete -----------------------------

Start: 13:48:46
End: 14:02:45
Duration: 00:13:58

[FreaQ]

1.7.0.6 1/2


-------------------------- System Environment --------------------------

StaxRip : 1.7.0.6
Windows : Windows 10 Home 1803
Language : German (Germany)
CPU : Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
GPU : Intel(R) HD Graphics 530, NVIDIA GeForce GTX 950M
Resolution : 1920 x 1080
DPI : 96

------------------------ MediaInfo Source File ------------------------

D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts

General
ID : 1055 (0x41F)
Complete name : D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts
Format : MPEG-TS
File size : 862 MiB
Duration : 21 min 8 s
Overall bit rate mode : Variable
Overall bit rate : 5 701 kb/s

Video
ID : 255 (0xFF)
Menu ID : 5500 (0x157C)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, RefFrames : 4 frames
Codec ID : 27
Duration : 21 min 7 s
Bit rate : 5 032 kb/s
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 FPS
Standard : Component
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan type, store method : Separated fields
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.129
Stream size : 761 MiB (88%)
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio
ID : 259 (0x103)
Menu ID : 5500 (0x157C)
Format : AC-3
Format/Info : Audio Coding 3
Format, Endianness : Big
Codec ID : 6
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : 8 ms
Stream size : 58.0 MiB (7%)
Language : German
Language, more info : Clean effects
Service kind : Complete Main

------------- ffmpeg: Re-mux TS to MKV using ffmpeg 3.3.4 -------------

D:\_Programme\_Portable\StaxRip\Apps\ffmpeg\ffmpeg.exe -i "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts" -c:a copy -c:v copy -sn -y -hide_banner "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv"

[h264 @ 00000227f7d276c0] mmco: unref short failure
Last message repeated 2 times
[h264 @ 00000227f7d276c0] Increasing reorder buffer to 2
Input #0, mpegts, from 'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ts':
Duration: 00:21:07.88, start: 86541.948111, bitrate: 5703 kb/s
Program 5500
Stream #0:0[0xff]: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25 fps, 50 tbr, 90k tbn, 50 tbc
Stream #0:1[0x103](deu): Audio: ac3 ([6][0][0][0] / 0x0006), 48000 Hz, 5.1(side), fltp, 384 kb/s (clean effects)
Output #0, matroska, to 'D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv':
Metadata:
encoder : Lavf57.71.100
Stream #0:0: Video: h264 (High) (H264 / 0x34363248), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], q=2-31, 25 fps, 50 tbr, 1k tbn, 90k tbc
Stream #0:1(deu): Audio: ac3 ([0] [0][0] / 0x2000), 48000 Hz, 5.1(side), fltp, 384 kb/s (clean effects)
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Stream #0:1 -> #0:1 (copy)
Press [q] to stop, [?] for help
video:796842kB audio:59438kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.090459%

Start: 14:26:18
End: 14:26:23
Duration: 00:00:05

------------------ Demux MKV using mkvextract 20.0.0 ------------------

D:\_Programme\_Portable\StaxRip\Apps\MKVToolNix\mkvextract.exe "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv" tracks 1:"D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3" --ui-language en

Extracting track 1 with the CodecID 'A_AC3' to the file 'D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3'. Container format: Dolby Digital (AC-3)

Start: 14:26:25
End: 14:26:26
Duration: 00:00:00

General
Complete name : D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3
Format : AC-3
Format/Info : Audio Coding 3
File size : 58.0 MiB
Duration : 21 min 8 s
Overall bit rate mode : Constant
Overall bit rate : 384 kb/s

Audio
Format : AC-3
Format/Info : Audio Coding 3
Format, Endianness : Big
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 58.0 MiB (100%)
Service kind : Complete Main

----------------------- Indexing using ffmsindex -----------------------

D:\_Programme\_Portable\StaxRip\Apps\Plugins\both\ffms2\ffmsindex.exe "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv" "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ffindex"

Writing index... done.

Start: 14:26:26
End: 14:26:28
Duration: 00:00:01

--------------------------- AviSynth Script ---------------------------

LoadPlugin("D:\_Programme\_Portable\StaxRip\Apps\Plugins\both\ffms2\ffms2.dll")
LoadPlugin("D:\_Programme\_Portable\StaxRip\Apps\Plugins\avs\TDeint\TDeint.dll")
FFVideoSource("D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv", colorspace = "YV12", \
cachefile = "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ffindex")
SelectEven().AssumeFPS(25)
TDeint()

-------------------------- Script Properties --------------------------

Source Frame Count : 31697
Source Frame Rate : 25.000000
Source Duration : 00:21:07.8800000
Target Frame Count : 31697
Target Frame Rate : 25.000000
Target Duration : 00:21:07.8800000

----------------------- MediaInfo Audio Source 1 -----------------------

General
Complete name : D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3
Format : AC-3
Format/Info : Audio Coding 3
File size : 58.0 MiB
Duration : 21 min 8 s
Overall bit rate mode : Constant
Overall bit rate : 384 kb/s

Audio
Format : AC-3
Format/Info : Audio Coding 3
Format, Endianness : Big
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 58.0 MiB (100%)
Service kind : Complete Main

-------------- Video encoding using x264 0.150.2851 8-Bit --------------

D:\_Programme\_Portable\StaxRip\Apps\x264\x264.exe --crf 19 --preset slow --tune animation --profile main --level 4.1 --trellis 1 --8x8dct --no-fast-pskip --subme 9 --me umh --bframes 3 --ref 4 --min-keyint 25 --sar 255:191 --threads 34 --lookahead-threads 5 --deblock -1:-1 --output "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2_out.h264" "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2.avs"

avs [info]: 1440x1080p 255:191 @ 25/1 fps (cfr)
x264 [info]: using SAR=255/191
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
x264 [info]: profile Main, level 4.1
x264 [info]: frame I:322 Avg QP:15.89 size:125493
x264 [info]: frame P:10271 Avg QP:19.05 size: 27995
x264 [info]: frame B:21104 Avg QP:22.21 size: 7547
x264 [info]: consecutive B-frames: 8.2% 7.9% 3.6% 80.3%
x264 [info]: mb I I16..4: 48.1% 0.0% 51.9%
x264 [info]: mb P I16..4: 14.8% 0.0% 7.6% P16..4: 34.9% 8.8% 4.4% 0.0% 0.0% skip:29.6%
x264 [info]: mb B I16..4: 1.0% 0.0% 0.8% B16..8: 23.9% 2.9% 0.6% direct: 1.8% skip:68.9% L0:40.2% L1:53.4% BI: 6.4%
x264 [info]: direct mvs spatial:100.0% temporal:0.0%
x264 [info]: coded y,uvDC,uvAC intra: 42.3% 67.7% 31.1% inter: 6.7% 15.3% 2.0%
x264 [info]: i16 v,h,dc,p: 39% 21% 11% 29%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 27% 14% 22% 5% 7% 7% 6% 6% 6%
x264 [info]: i8c dc,h,v,p: 29% 27% 28% 16%
x264 [info]: Weighted P-Frames: Y:0.5% UV:0.4%
x264 [info]: ref P L0: 62.9% 8.0% 20.2% 8.1% 0.8% 0.0%
x264 [info]: ref B L0: 87.9% 9.5% 2.6%
x264 [info]: ref B L1: 96.1% 3.9%
x264 [info]: kb/s:3074.21
encoded 31697 frames, 21.56 fps, 3074.21 kb/s

Start: 14:27:18
End: 14:51:48
Duration: 00:24:30

[FreaQ]

1.7.0.6 2/2

General
Complete name : D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2_out.h264
Format : AVC
Format/Info : Advanced Video Codec
File size : 465 MiB
Writing library : x264 core 152 r2851 ba24899

Video
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.1
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, RefFrames : 4 frames
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 152 r2851 ba24899

--------------------- Muxing using mkvmerge 20.0.0 ---------------------

D:\_Programme\_Portable\StaxRip\Apps\MKVToolNix\mkvmerge.exe -o "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2.mkv" "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2_out.h264" --audio-tracks 0 --language 0:ger --sync 0:11 --default-track 0:0 --forced-track 0:0 "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3" --global-tags "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2_tags.xml" --ui-language en

mkvmerge v20.0.0 ('I Am The Sun') 64-bit
'D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2_out.h264': Using the demultiplexer for the format 'AVC/h.264'.
'D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3': Using the demultiplexer for the format 'AC-3'.
'D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2_out.h264' track 0: Using the output module for the format 'AVC/h.264 (unframed)'.
'D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen ID1 11ms German.ac3' track 0: Using the output module for the format 'AC-3'.
The file 'D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2.mkv' has been opened for writing.
'D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2_out.h264' track 0: Extracted the aspect ratio information from the MPEG-4 layer 10 (AVC) video data and set the display dimensions to 1923/1080.
The cue entries (the index) are being written...
Multiplexing took 3 seconds.

Start: 14:51:49
End: 14:51:51
Duration: 00:00:02

General
Complete name : D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen 2.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 523 MiB
Duration : 21 min 8 s
Overall bit rate : 3 460 kb/s
Encoded date : UTC 2018-10-12 12:51:49
Writing application : mkvmerge v20.0.0 ('I Am The Sun') 64-bit
Writing library : libebml v1.3.5 + libmatroska v1.4.8
Writing frontend : StaxRip v1.7.0.6

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.1
Format settings : CABAC / 4 Ref Frames
Format, CABAC : Yes
Format, RefFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 21 min 7 s
Bit rate : 3 074 kb/s
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Original display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.079
Stream size : 465 MiB (89%)
Writing library : x264 core 152 r2851 ba24899
Default : Yes
Forced : No

Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Format, Endianness : Big
Codec ID : A_AC3
Duration : 21 min 8 s
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : 11 ms
Stream size : 58.0 MiB (11%)
Language : German
Service kind : Complete Main
Default : No
Forced : No

----------------------------- Job Complete -----------------------------

Start: 14:27:17
End: 14:51:51
Duration: 00:24:34

[imhh11]

Does anybody have a guide on how to set up staxrip to re-encode 2160p 10 bit HDR-10 to 2160p 10 bit HDR-10 using Nvenc?
Thank you for any help given.

Hi, its very easy to do.

Load NVenc H265 , then import your HDR file and start the encode.

If your source is DCI-P3, you'll have to set the mastering display values manually in the VUI tab. If your source is BT2020: nothing else to do.

You could also use my custom staxrip with templates especially made for encoding UHD-BDs. Nothing to manually set, everything is automatic (dci-p3 or bt2020)

https://drive.google.com/open?id=1yOW4CKwr2WqeEfVZaOjcItjpOOfa9rnD

https://forum.redfox.bz/attachments/upload_2018-10-11_17-35-13-png.44881/

[DaMacFunkin]

Hi, its very easy to do.

Load NVenc H265 , then import your HDR file and start the encode.

If your source is DCI-P3, you'll have to set the mastering display values manually in the VUI tab. If your source is BT2020: nothing else to do.

You could also use my custom staxrip with templates especially made for encoding UHD-BDs. Nothing to manually set, everything is automatic (dci-p3 or bt2020)

https://drive.google.com/open?id=1o7j2-sD4ghFFoj3oTfWy6SxeriUTJOYF

https://forum.redfox.bz/attachments/upload_2018-10-11_17-35-13-png.44881/Thank you very much, I will give this a go.:thanks:

[Revan654]

Today I encountered the same problem.
I was reencoding a HDTV capture which resulted in a slow downed video. Audio is playing at the correct speed. Also the target and source video play at the same frame rate and have the same duration.

I reencoded the source video in StaxRip 1.7.0.6 and everything is fine.

Find attached logs from both versions in following posts

StaxRip is only passing the flags onto the Encoder. If there is an issues it's due to the encoder, not StaxRip it self. It's likely due to internal changes to the encoder, Which I have no control over. Whoever compiled them could have done it incorrectly. You can also try VS2015 version or GCC version, each one uses different code to compile the source. Also make sure your using the correct one to match your CPU.

Lastly Make sure sourcefilter is being used correctly. If your using AVS, click source play. it will playback the file using the avs file. It can help narrow down where the issue is.

Without knowing the exact process that creating the issues, it's impossible to look at the code and see if it's creating issues.

I'm currently re-installing VS 2017, it might take a bit before I can look at the code. The setup was eating way to much HDD space(I was close to 100GB just for VS 2017). No Compiler should eat that much space.

The Next Release, Everything will be compiled from the ground up using my CPU, instead of using exe from others. It will delay things bit but this way I know everything is 100% correct.

if you look at your AVS there very different.

LoadCPlugin("D:\_Programme\_Portable\Staxrip 1.9.0.0\Apps\Plugins\both\ffms2\ffms2.dll")
FFVideoSource("D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv", colorspace = "YV12", \
cachefile = "D:\Video\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen_temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ffindex")

vs

LoadPlugin("D:\_Programme\_Portable\StaxRip\Apps\Plugins\both\ffms2\ffms2.dll")
LoadPlugin("D:\_Programme\_Portable\StaxRip\Apps\Plugins\avs\TDeint\TDeint.dll")
FFVideoSource("D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.mkv", colorspace = "YV12", \
cachefile = "D:\Video\Miraculous - Ge..._temp\Miraculous - Geschichten von Ladybug und Cat Noir - S02E03 - Prime Queen.ffindex")
SelectEven().AssumeFPS(25)
TDeint()

[mironicus]

Hello,

I am using Staxrip and tried H265 GPU encoding with the integrated Intel Kabylake GPU. That is working, however if I try 10 Bit Encoding (MAIN10), the files get so much larger compared with 8 Bit (MAIN) and same settings.

For example the length of a demo file in 8 bit after encoding: 388 MB, the version with MAIN10 and the same settings is 1.79 GB.

I also tried Handbrake also with 8/10 Bit encoding and Intel GPU and the file size of the 10 bit version is usually smaller than the 8 bit version.

Can someone confirm this problem?

[Khun_Doug]

Did you use Mediainfo or something similar to look at the bitrate of the encoded file to compare the 8 bit encode versus the 10 bit encode? It could be that the 10 bit encode is somehow encoding at a much greater bitrate than expected. I know from own experience that using NVEncc with my Nvidia board produces the expected results.

[Revan654]

Hello,

I am using Staxrip and tried H265 GPU encoding with the integrated Intel Kabylake GPU. That is working, however if I try 10 Bit Encoding (MAIN10), the files get so much larger compared with 8 Bit (MAIN) and same settings.

For example the length of a demo file in 8 bit after encoding: 388 MB, the version with MAIN10 and the same settings is 1.79 GB.

I also tried Handbrake also with 8/10 Bit encoding and Intel GPU and the file size of the 10 bit version is usually smaller than the 8 bit version.

Can someone confirm this problem?

HandBrake Uses FFMPEG, Where StaxRip uses QSVEncC/GPUBrandENCc.

You can Use FFMPEG Encoder Engine too. The Main Encoder are the ENCc.


For Intel:

New Release: https://github.com/rigaya/QSVEnc/releases/tag/3.10

Fixes: Fix decode issue with some HEVC 10bit inputs
Updated: Updated to Intel Media SDK 2018 R2 (API 1.27).

-----

Nvidia:

New Release: https://github.com/rigaya/NVEnc/releases/tag/4.20

Fixes: Fix avhw decode issue on some 10bit HEVC
Fixes: avsw decode issue on some 10bit HEVC + other 10Bit Fixes.

[FreaQ]

if you look at your AVS there very different.


You are right.

Since TDeint is missing from1.9.0 I used yadifmod2. It seems I am not capable of configuring it correctly and this caused the slowdown.

As for 1.7.6 I have no clue were SelectEven().AssumeFPS(25) came from because I just enabled TDeint.

[-QfG-]

A simple question?

When i'm extract mkv's, and i have *.sup subtitles and audio, following happens in 1.9:

- Subtitles (sup) without extension (example german.sup, extracted: german.)
- Audio: will be extracted in mka container. Why? I must demux the mka container for dubbing.

Rolling back to 1.8, i hope you fix this. Or is this only a setting, i don't know?

[Zetti]

MKVToolNix v28.0.0 is released.