StaxRip

[dandyclubs]

today i install StaxRip_x64_1.3.2.0
python-3.5.1-amd64-webinstall
vapoursynth-r31

L-SMASH-Works-r875-20160202-64bit is not work.. StaxRip crash..

i change vslsmashsource.dll in L-SMASH-Works-r859-20160108-64bit.7z

fine work.

[stax76]

i use vslsmashsource.dll in L-SMASH-Works-r859-20160108-64bit.7z

fine work..

but L-SMASH-Works-r875-20160202-64bit is not work..

Hello, does it generally not work or has a problem only with a particular source file or source file type?

[dandyclubs]

Hello, does it generally not work or has a problem only with a particular source file or source file type?

eac3to blu-ray to mkv

General
Unique ID : 209022388361333221829617356128763458446 (0x9D403F67E82874FDFBF49EA9A6CF338E)
Complete name : K:\WORK\99\99.mkv
Format : Matroska
Format version : Version 1
File size : 19.2 GiB
Duration : 2h 0mn
Overall bit rate mode : Constant
Overall bit rate : 22.9 Mbps
Encoded date : UTC 2016-02-29 21:37:22
Writing application : eac3to
Writing library : Haali DirectShow Matroska Muxer 1.13.138.14
ErrorDetectionType : Per level 1
CRC_Error_Pos : 231

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Muxing mode : Container profile=@0.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 0mn
Bit rate mode : Constant
Bit rate : 23.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 30.000 fps
Original frame rate : 29.970 (30000/1001) fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan type, store method : Separated fields
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.370
Stream size : 18.9 GiB (98%)
Default : No
Forced : No
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

[dandyclubs]

Source file MediaInfo
------------------------------------------------------------

K:\WORK\99\99.h264

General
Complete name : K:\WORK\99\99.h264
Format : AVC
Format/Info : Advanced Video Codec
File size : 19.2 GiB
Overall bit rate mode : Constant

Video
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Bit rate mode : Constant
Bit rate : 23.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 (30000/1001) fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan type, store method : Separated fields
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.370
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709


------------------------------------------------------------
Index LWLibav
------------------------------------------------------------

"C:\Program Files (x86)\VapourSynth\core64\vspipe.exe" "K:\WORK\99\99.vpy" NUL -i


------------------------------------------------------------
Error Index LWLibav
------------------------------------------------------------

Index LWLibav failed with exit code: -1073741819 (0xC0000005)

The exit code might be a system error code: 0xp에 있는 명령이 0xp의 메모리를 참조했습니다. 메모리는 s될 수 없습니다.



Start: 오후 10:35:46
End: 오후 10:35:46
Duration: 00:00:00


------------------------------------------------------------
Exception
------------------------------------------------------------

StaxRip.ErrorAbortException: Index LWLibav failed with exit code: -1073741819 (0xC0000005)

The exit code might be a system error code: 0xp에 있는 명령이 0xp의 메모리를 참조했습니다. 메모리는 s될 수 없습니다.



위치: StaxRip.Proc.Start() 파일 D:\Projekte\GitHub\staxrip\General\Proc.vb:줄 235
위치: StaxRip.MainForm.Indexing() 파일 D:\Projekte\GitHub\staxrip\Forms\MainForm.vb:줄 3064
위치: StaxRip.MainForm.Demux() 파일 D:\Projekte\GitHub\staxrip\Forms\MainForm.vb:줄 3021
위치: StaxRip.MainForm.OpenVideoSourceFiles(IEnumerable`1 files, Boolean isNotEncoding) 파일 D:\Projekte\GitHub\staxrip\Forms\MainForm.vb:줄 1838

[stax76]

@dandyclubs

Here it works with a similar source, full log:

http://pastebin.com/efU7ShE0

Interesting could be this:

The exit code might be a system error code: 0xp에 있는 명령이 0xp의 메모리를 참조했습니다. 메모리는 s될 수 없습니다.

I don't know about the foreign characters, can you send me the original log file as email attachment? My mail address is in StaxRip's main menu.

@cegy

For regular audio files the old behavior is restored.

[stax76]

@dandyclubs

Maybe you can cut 100 mb with mkvtoolnix gui and upload it to media fire or google drive. If it fails here too I'll forward it to the l-smash author.

[dandyclubs]

Sorry

log file was overwrited

[dandyclubs]

@dandyclubs

Maybe you can cut 100 mb with mkvtoolnix gui and upload it to media fire or google drive. If it fails here too I'll forward it to the l-smash author.


check email

have crash only blu-ray to mkv file by eac3to

[Groucho2004]

The exit code might be a system error code: 0xp에 있는 명령이 0xp의 메모리를 참조했습니다. 메모리는 s될 수 없습니다.

I don't know about the foreign characters
It's Korean and refers to this NTSTATUS code:
0xC0000005
STATUS_ACCESS_VIOLATION
The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

[luigizaninoni]

so it's a bug in havsfunc?

Sorry, there was an older Knlmeanscl.dll in autoload folder, I removed it and there is no need to edit havsfunc.py. Wref parameter is recognised.

Crop is fine in 1.3.2.0. Thank you very much

[stax76]

@dandyclubs

nice clip ;), I've created a ticket and let you know when VFR-maniac replies.

[cegy]

@dandyclubs

Here it works with a similar source, full log:

http://pastebin.com/efU7ShE0

Interesting could be this:

The exit code might be a system error code: 0xp에 있는 명령이 0xp의 메모리를 참조했습니다. 메모리는 s될 수 없습니다.

I don't know about the foreign characters, can you send me the original log file as email attachment? My mail address is in StaxRip's main menu.

@cegy

For regular audio files the old behavior is restored.

that's great news @stax76 i guess i need to wait for the next test build then ?

[stax76]

that's great news @stax76 i guess i need to wait for the next test build then ?

yes but probably won't be long

[cegy]

also another bug for you to sort out, its the video comparison it seems if the filter is set to something other than manual ? it will fail i only notice this myself since i like to use dgsource myself

http://gfycat.com/BrokenHoarseFruitbat

would it also be possible to show what the crop values are set to via mouse over event or something since the "preview" tab is missing

[stax76]

The source filter used for the video comparison is hardcoded to ffms2 I think so it don't matter what source filter is in the main dialog, choosing DGSource triggered a bug however, it'll be fixed.

The crop values mouse over issue I don't understand yet, you mean in the video comparison?

[cegy]

The source filter used for the video comparison is hardcoded to ffms2 I think so it don't matter what source filter is in the main dialog, choosing DGSource triggered a bug however, it'll be fixed.

The crop values mouse over issue I don't understand yet, you mean in the video comparison?

nah as in if the user was to make the crop in there video (the video there going to encode) how can they get a preview of what values that was used ?

as in 1.1.8 you had the preview tab when you double click on crop
https://i.imgur.com/EFjMyQG.png

[stax76]

You can find the crop values:

in the crop dialog in the status bar

in the options dialog under Image | Crop

double click filters to show Scripting Editor > show context menu > Script Preview

[cegy]

You can find the crop values:

in the crop dialog in the status bar

in the options dialog under Image | Crop

double click filters to show Scripting Editor > show context menu > Script Preview

oh i would of never known that due to being hided so well away wouldn't a button make it easier for the user to find it ? (far left side from ok and cancel maybe ?)
better yet if you want to keep it clean but to the point how about ? (not sure of the name click able title?)
https://i.imgur.com/q5ehwmG.png

[Magik Mark]

Stax,

Are the settings for the default template been updated. For instance, in x265 the default psy rd was changed from 0.3 to 2

[stax76]

My code is fairly up-to-date, I'm using a diff checker tool to catch changes. I did not reset the profiles and templates though, if you want to reset there is a reset feature for both profiles and templates.

[Magik Mark]

My code is fairly up-to-date, I'm using a diff checker tool to catch changes. I did not reset the profiles and templates though, if you want to reset there is a reset feature for both profiles and templates.

Tried doing that. the psy rd remain 0.3 so I have to manually change it

stax, I'm trying to use "RemoveGrainHD" in lieu of "RemoveGrain" for HD sources. Is this possible?

Thanks

[stax76]

have you seen main menu > tools > directories > plugins ?

[Magik Mark]

I'm getting script error - "There is no function named RemovegrainHD

This is what I did. I copied the Removegrainhd.dll to the avisynth plugin folder then I added Removegrainhd in the filter profile.

Did I missed something?

Thanjks

[stax76]

Are you aware that StaxRip x64 supports only AviSynth+ x64 and AviSynth+ x64 supports only x64 plugins?

http://avisynth.nl/index.php/AviSynth%2B#AviSynth.2B_x64_plugins

[stax76]

some fixes and a feature requested since years

### Download

https://drive.google.com/folderview?id=0B-gPKiJYuKuIRGUxckdyQU5DUkE&usp=sharing

http://1drv.ms/1OqPDOe

### New Features

- support for 3 or more audio tracks added to the muxing dialog
- code preview added to filters menu and script preview renamed to code preview in script editor

### Fixed Bugs

- fixed window freeze in eac3to dialog happening when eac3to fails on the input.
- fixed showing filter selection dialog even if the source is vpy or avs
- fixed StaxRip trying to auto correct the script even if the source is avs
- fixed StaxRip recalculating the video bitrate even when the fixed bitrate option is used
- avi muxer supports two audio tracks now
- in some cases the two audio output file paths were identical
- moving subtitles up and down wasn't working correctly
- the new mp4box update should fix a bug many people reported

### Tweaks

- better error handling when the source is vpy or avs
- when loading an audio file without language info the language of the audio profile/stream stays instead of being changed to undetermined

### Updated Tools

- mp4box 0.6.0
- QSVEncC 2.37

[TalasNetrag]

Is it possible to give the infotext in the preview a black border? Sometimes it's hard to see anything.
http://www.mediafire.com/convkey/3ea0/1ki12j1ut8gs6154g.jpg (http://www.mediafire.com/view/1ki12j1ut8gs615/Infotext.PNG)

Minor inconsistency: When opening a file normaly StaxRip asks to select a source filter and if any of the audio track should be demuxed.
When opening a file with the "open with" dialog (rightclick->open with->StaxRip) StaxRip chooses the source filter and demuxes all audio tracks.

[stax76]

Is it possible to give the infotext in the preview a black border? Sometimes it's hard to see anything.

yes, good idea!

Minor inconsistency: When opening a file normaly StaxRip asks to select a source filter and if any of the audio track should be demuxed.
When opening a file with the "open with" dialog (rightclick->open with->StaxRip) StaxRip chooses the source filter and demuxes all audio tracks.

It's by design that if you use the StaxRip CLI then no dialogs are shown because CLI is often used by batch files, I could make a CLI switch to control this but I'm not sure if showing dialogs should be default in CLI mode.

[stax76]

mp4box was broke because I had compiled in in debug mode...
The info in the preview looks better and is readable regardless of the current background
added a command line switch -show-dialogs:bool and project option 'Show all dialogs when invoked from CLI', by default dialogs are not shown when StaxRip receives CLI arguments


https://github.com/stax76/staxrip/wiki/test-build

[RieGo]

found a little bug:
trying to open a file containing the ' character with vapoursynth results in an error. didn't try avisynth.

[stax76]

If I remember right then Python and JavaScript allow strings defined with both ' and " and since VB.NET uses " I used ' to define all the Python code, if I change it to " then it will be fine I hope.

[RieGo]

If I remember right then Python and JavaScript allow strings defined with both ' and " and since VB.NET uses " I used ' to define all the Python code, if I change it to " then it will be fine I hope.

yeah, that's what i thought about as well. hopefully it works :)

[stax76]

QSVEncC64.exe --la-depth 30 --la-icq 20

No matter which value I use for --la-icq using QSVEncC64 the resulting file is always 41.2 Mbps according to MediaInfo, am I doing something wrong here?

[NikosD]

Try without --la-depth parameter, haven't tested recently though

I always use net --icq.

[Yups]

mp4box was broke because I had compiled in in debug mode...
The info in the preview looks better and is readable regardless of the current background
added a command line switch -show-dialogs:bool and project option 'Show all dialogs when invoked from CLI', by default dialogs are not shown when StaxRip receives CLI arguments


https://github.com/stax76/staxrip/wiki/test-build



This version doesn't work anymore with videos without audio stream.


http://abload.de/img/ffmpegx7si7.png

[stax76]

This version doesn't work anymore with videos without audio stream.


http://abload.de/img/ffmpegx7si7.png

It will be fixed in the next build.

[Q-the-STORM]

I need some help encoding a 4:2:2 10bit v210 avi to 4:2:0 10bit x264 and 4:2:0 8bit x264....
I'm using x64 1.3.2.0 and have avisynth+ and LAV Filters installed...

DSS2 is giving this error:
DSS2: Can't open "E:\File.avi"

Connect filters (Src_Out + VS_In): (80040217) No combination of intermediate filters could be found to make the connection.

(E:\File temp files\File_Source.avs, line 2)


ffvideosource after indexing:
System exception - Access Violation
(E:\File temp files\File_Source.avs, line 2)

avisource:
AVISource couldn't locate a decompressor for fourcc v210

(E:\File temp files\File_Source.avs, line 1)

DirectShowSource:
DirectShowSource couldn't open file E:\File.avi:
Cannot play back the video stream: no suitable decompressor could be found.

(E:\File temp files\File_Source.avs, line 1)

the other ones result in crashing staxrip...

I have no problems watching the clip with MPC-HC + LAV...

[Dust Signs]

Switching from StaxRip to StaxRip x64, I find the support of AviSynth+ and VapourSynth really confusing. I tried to reproduce what I did with StaxRip previously - processing a video with MDegrain with multiple threads (previously using AviSynth MT) for parallelization - but was not able to do so.
I downloaded the release from a few days ago and installed (its shipped version of) AviSynth+. I noticed that mvtools were not available for it, so I uninstalled AviSynth+ and installed VapourSynth instead. In this configuration, when opening a video, StaxRip x64 complains that AviSynth+ is not installed. This does not make sense to me - I thought that VapourSynth is an AviSynth "replacement" just like AviSynth+, not something that builds on the latter.
Anyways, I proceeded to install AviSynth+ again. With both (AviSynth+ and VapourSynth) installed, I could open video files again, but I was not able to use MDegrain2 - the new syntax of VapourSynth and the available noise-filtering templates confused me. Calls like Prefetch(4) still work, but they do not seem to be VapourSynth syntax. I doubted that VapourSynth was even invoked in any operation that I did.
Honestly, I am lost at this point. There seems to be no proper documentation regarding how and when to use AviSynth+ or VapourSynth in StaxRip x64 - whether they can/should/must be combined or whether they can be used without one another. How can a plugin like mvtools that is only available for VapourSynth be used from within StaxRip? Would anyone be so kind as to shed some light onto this?

Thank you very much
Dust Signs

[stax76]

@Q-the-STORM

I wasn't able to open such a file with AviSynth and can't tell you if it can be done. It has worked with ffms2 under VapourSynth and x265 > Basic > Depth: 10 bit

@Dust Signs

I'm sorry you had a bad experience, when you open a file the filter selection should show where you can choose ffms2 for VapourSynth, if VapourSynth and Python aren't installed StaxRip should show the apps dialog which has download links for VapourSynth and Python.

[LexSfX]

You have "DTS" listed twice in the original post's "output codecs".

[stax76]

You have "DTS" listed twice in the original post's "output codecs".

?????

[LexSfX]

Output Codecs: XVID, H.264, H.265, VP9, MP3, AC3, AAC, VORBIS, DTS, FLAC, OPUS, DTS


This is all I meant. See? It just looks a bit confusing.

[stax76]

This is all I meant. See? It just looks a bit confusing.

yes sorry, I'll update it using this:

http://feralhosting.github.io/

[Dust Signs]

I'm sorry you had a bad experience, when you open a file the filter selection should show where you can choose ffms2 for VapourSynth, if VapourSynth and Python aren't installed StaxRip should show the apps dialog which has download links for VapourSynth and Python.

I downloaded StaxRip x64 again, chose a new settings folder, installed Python and VapourSynth and tried to open a file. StaxRip complains that AviSynth+ is not installed and does not allow me to proceed.
I tried to set different source filters in Tools\Settings\Source Filters manually, but the problem prevails. Even though StaxRip x64 reports the installation status of both, Python and VapourSynth to be OK, StaxRip x64 prompts me to install AviSynth+.

Best regards
Dust Signs

[stax76]

I downloaded StaxRip x64 again, chose a new settings folder, installed Python and VapourSynth and tried to open a file. StaxRip complains that AviSynth+ is not installed and does not allow me to proceed.
I tried to set different source filters in Tools\Settings\Source Filters manually, but the problem prevails. Even though StaxRip x64 reports the installation status of both, Python and VapourSynth to be OK, StaxRip x64 prompts me to install AviSynth+.

You can find some info here:

https://github.com/stax76/staxrip/wiki/Test-Build

http://forum.doom9.org/showthread.php?p=1759453#post1759453

[Dust Signs]

I'm having the same problem with the test build. StaxRip x64 still complains about AviSynth+ not being installed when opening any video file.
EDIT: I just saw that the last section of the "Test Build" page refers to changes that you have made locally; does this mean that the next test build will work with VapourSynth (i.e. without AviSynth+)?

Best regards
Dust Signs

[stax76]

It's because before you open a source your script is AviSynth, you can change it to VapourSynth with context menu before you open the source, in the next build it won't matter.

[Dust Signs]

It's because before you open a source your script is AviSynth, you can change it to VapourSynth with context menu before you open the source, in the next build it won't matter.

EDIT: I found it. Wow, that one is really well hidden. Would it be possible to make it more visible or is the next build making this context menu completely obsolete?

Best regards
Dust Signs

[stax76]

Filters > menu > Filter Setup

but due to a critical bug I'm uploading a new build shortly anyway

[stax76]

The new support for more then two audio tracks had a bad bug so I've uploaded a new build:

https://github.com/stax76/staxrip/wiki/Test-Build

[Pengaban]

Hi,

I tried to use StaxRip with NVENC to encode some .ts Files but I always get the following error:


------------------------------------------------------------
Error Encoding using NVEncC
------------------------------------------------------------

Encoding using NVEncC failed with error code 1

No GPU found suitable for NVEnc Encoding.





The used Nvidia GPU in this system is a GT630 v2. This is a GK208 Keppler Chip(double checked this with GPU-Z) which I thought should be able to use the first gen NVENC.

Sys: Win7 64bit (SP1), Nvidia driver 320.49

Maybe I have to use a newer Nvidia GPU driver? Any ideas on that?

Thanks!