StaxRip

[stax76]

@chummy

There was a bug causing the executable path not being added to the command line.


@Yanak

I've updated AviSynth+ and fixed the extension being added to the output path even when no source is loaded.


@RazorBurn, sneaker_ger, TalasNetrag

I can probably add timecode support, a sample source file would be helpful.

[stax76]

The build I've uploaded today unfortunately is broke unless you have a 4K display with 300% zoom, it will be much work to fix. :(

edit:

new test build is online, hopefully without scaling/layout issues.

[Yanak]

Thanks for the new build and fixes will try later at home.

Stax can i use the settings from previous StaxRip-x64-1.3.8.9-test build in this build ( i use settings stored in the program folder ), I mean can I just move the settings folder into the new build or is it risky to do it like this for potential conflicts or errors ??

Thank you.

[Yanak]

Well i tested like this with importing settings, little things i found directly for the scaling :

default mp4 container selected on main window > containers options :
Before
https://s14.postimg.org/wsei2mssx/43893920161027194950.png
After :
https://s14.postimg.org/nxdns4jg1/19887620161027194947.png

And this :
Before
https://s14.postimg.org/3q07zttoh/37513320161027195157.png
After :
https://s14.postimg.org/a3pb336a9/33621820161027192922.png

Will see after a bit more testing in the next days if i find more.

Thank you.

[stax76]

thanks for testing Yanak, the build/upload scripts runs so a new build will be online in 2 minutes.

[Yanak]

Thanks to you for the dedicated work you put on this.

The first issue for the chapters is fixed, sadly the second one isn't and is somehow a bit worse now, previously the window had a reduced size compared to before and no border on the right side like highlighted here :
https://s14.postimg.org/z9q99uuox/34944633621820161027192922.png

Now with the StaxRip-x64-1.3.9.3-test the window for "command line container options " is different but a part of the command is missing/ not displaying until we click and get the edit batch command window :

https://s14.postimg.org/7z4y1xzht/268440_Video20161028005118.gif

Thank you.

[stax76]

I hope it's better now, I've connected my old monitor as second display and used vmware to test it on Win 7 with 96 and 144 DPI.

https://github.com/stax76/staxrip/blob/master/md/test-build.md

[Yanak]

All good now, window is smaller for the command line compared to main build but it's perfect as it is, was too big before for just a few commands.
https://s14.postimg.org/cxsggeazl/76755820161028161125.png


Thanks a lot, will see in the next days playing with it if i find something else to report ;)

[Lupissimo]

When I start the latest testversion it looks like this with the bottom cut off:
https://s12.postimg.org/xvwa7li4t/Stax_Rip_x64_1_3_9_4_test.png

[stax76]

@Lupissimo

I need the following infos:

Windows version
zoom or DPI value
resolution

[Lupissimo]

Win 10 Pro Version 1511 64bit
Zoom: 100%
1920x1080

[stax76]

my Win 10 is build 1607, what's the StaxRip build version? 1.3.9.4 looks fine here with 100% (96 DPI) and 1920x1080

[Lupissimo]

The test version 1.3.9.4

[stax76]

The test version 1.3.9.4

I don't know anything else other then waiting if somebody else sees the same issue, sorry.

[Lupissimo]

Tested it on a different PC with
Win 10 Pro Version 1607
Zoom 100%
and it's OK.
The difference of the version seems to be, that I disabled on the first PC the updates for "upgrades".

[stax76]

What graphics adapters were in use?

[Lupissimo]

NVIDIA Geoforce GTX 950 ( there it fails)
NVIDIA Geoforce 9400 GT ( it's OK)

[stax76]

I use a GTX 1060

[telarium]

Same issue as Lupissimo.

980ti, 375.70
Windows 10 Pro, 1607
Scaling Mode: Aspect ratio
1920x1080, 60hz

[stax76]

Scaling Mode: Aspect ratio

Are you referring to a windows setting? Where do I find it?

[Lupissimo]

I found that it is caused by my 2nd monitor! If I switch to use only 1 monitor Staxrip is ok!

[telarium]

Are you referring to a windows setting? Where do I find it?

https://s16.postimg.org/ydkia2k3p/nvcp.png

I also have a multi-monitor setup. When I'm not working, I'll test it on a single monitor.

[lordalibaski]

What was once my favourite program to use for all my videos is now one of my worst nightmares to use.

I'm getting fed up of seeing this error

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
_________ __ __________.__
/ _____// |______ ___ __\______ \__|_____
\_____ \\ __\__ \ \ \/ /| _/ \____ \
/ \| | / __ \_> < | | \ | |_> >
/_______ /|__| (____ /__/\_ \|____|_ /__| __/
\/ \/ \/ \/ |__|

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Environment
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

StaxRip x64 : 1.3.9.4
OS : Windows 10 Pro
Language : English (United Kingdom)
CPU : Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
GPU : AMD Radeon HD 6670

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Source file MediaInfo
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection.mpeg

General
Complete name : C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection.mpeg
Format : MPEG-PS
File size : 3.28 GiB
Duration : 33 min 6 s
Overall bit rate : 14.2 Mb/s

Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 2
Format profile : Main@Main
Format settings, BVOP : Yes
Format settings, Matrix : Default
Format settings, GOP : M=3, N=10
Format settings, picture structure : Frame
Duration : 33 min 6 s
Bit rate : 12.4 Mb/s
Maximum bit rate : 8 000 kb/s
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 4:3
Frame rate : 25.000 FPS
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 1.193
Time code of first frame : 00:59:59:00
Time code source : Group of pictures header
GOP, Open/Closed : Open
Stream size : 2.86 GiB (87%)
Color primaries : BT.601 PAL
Transfer characteristics : BT.470 System B, BT.470 System G
Matrix coefficients : BT.601

Audio
ID : 189 (0xBD)-160 (0xA0)
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Muxing mode : DVD-Video
Duration : 33 min 6 s
Bit rate mode : Constant
Bit rate : 1 536 kb/s
Channel(s) : 2 channels
Sampling rate : 48.0 kHz
Bit depth : 16 bits
Stream size : 364 MiB (11%)

Menu
Duration : 33 min 6 s

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Index with ffmsindex
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

C:\Users\\Desktop\StaxRip-x64-1.3.9.4-test\Apps\Plugins\both\ffms2\ffmsindex.exe "C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection.mpeg" "C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection_temp\N.W.A Legacy The Video Collection.ffindex"

Writing index... done.

Start: 22:07:31
End: 22:07:48
Duration: 00:00:16

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Script
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

LoadPlugin("C:\Users\\Desktop\StaxRip-x64-1.3.9.4-test\Apps\Plugins\both\ffms2\ffms2.dll")
LoadPlugin("C:\Users\\Desktop\StaxRip-x64-1.3.9.4-test\Apps\Plugins\both\KNLMeansCL\KNLMeansCL.dll")
LoadPlugin("C:\Users\\Desktop\StaxRip-x64-1.3.9.4-test\Apps\Plugins\avs\yadifmod2\yadifmod2.dll")
FFVideoSource("C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection.mpeg", cachefile = "C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection_temp\N.W.A Legacy The Video Collection.ffindex")
yadifmod2()
KNLMeansCL(D = 0, A = 6, h = 6)

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Script Properties
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

source frame count : 74191
source frame rate : 37.345483
source duration : 00:33:06.6120000
target frame count : 74191
target frame rate : 37.345483
target duration : 00:33:06.6120000

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Demux audio using ffmpeg 3.1.5 x64
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

C:\Users\\Desktop\StaxRip-x64-1.3.9.4-test\Apps\ffmpeg\ffmpeg.exe -i "C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection.mpeg" -c:a copy -vn -sn -y -hide_banner "C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection_temp\N.W.A Legacy The Video Collection ID1.wav"

Guessed Channel Layout for Input Stream #0.2 : stereo
Input #0, mpeg, from 'C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection.mpeg':
Duration: 00:33:06.71, start: 0.094044, bitrate: 14189 kb/s
Stream #0:0[0x1bf]: Data: dvd_nav_packet
Stream #0:1[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, bt470bg), 720x576 [SAR 16:15 DAR 4:3], 8000 kb/s, 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:2[0xa0]: Audio: pcm_dvd, 48000 Hz, 2 channels, s16, 1536 kb/s
[wav @ 00000000027e9580] Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
[wav @ 00000000027e9580] pcm_dvd codec not supported in WAVE format
Output #0, wav, to 'C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection_temp\N.W.A Legacy The Video Collection ID1.wav':
Metadata:
encoder : Lavf57.41.100
Stream #0:0: Audio: pcm_dvd, 48000 Hz, stereo (16 bit), 1536 kb/s
Stream mapping:
Stream #0:2 -> #0:0 (copy)
Could not write header for output file #0 (incorrect codec parameters ?): Function not implemented

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Error Demux audio using ffmpeg 3.1.5 x64
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Demux audio using ffmpeg 3.1.5 x64 failed with exit code: 1 (0x1)

The exit code might be a system error code: STATUS_WAIT_1

The exit code might be a system error code: Incorrect function.

Guessed Channel Layout for Input Stream #0.2 : stereo
Input #0, mpeg, from 'C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection.mpeg':
Duration: 00:33:06.71, start: 0.094044, bitrate: 14189 kb/s
Stream #0:0[0x1bf]: Data: dvd_nav_packet
Stream #0:1[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, bt470bg), 720x576 [SAR 16:15 DAR 4:3], 8000 kb/s, 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:2[0xa0]: Audio: pcm_dvd, 48000 Hz, 2 channels, s16, 1536 kb/s
[wav @ 00000000027e9580] Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
[wav @ 00000000027e9580] pcm_dvd codec not supported in WAVE format
Output #0, wav, to 'C:\Users\\Desktop\upload\N.W.A Legacy The Video Collection_temp\N.W.A Legacy The Video Collection ID1.wav':
Metadata:
encoder : Lavf57.41.100
Stream #0:0: Audio: pcm_dvd, 48000 Hz, stereo (16 bit), 1536 kb/s
Stream mapping:
Stream #0:2 -> #0:0 (copy)
Could not write header for output file #0 (incorrect codec parameters ?): Function not implemented

Start: 22:09:01
End: 22:09:01
Duration: 00:00:00

[Leo 69]

lordalibaski

Where did you obtain this .mpeg file from? Did you happen to change the extension of this file from .vob and then feed it to the program?

[lordalibaski]

Can't believe how stupid I feel at the moment ...thanks Leo for spotting that out something so simple VOBMERGE the program I use to join the VOB files was set to merge as mpeg and not vob works straight away now...no idea how it changed itself to mpeg from vob.

[stax76]

Are both monitors the same resolution and DPI? Duplicated or Expanded?

[Lupissimo]

Expanded Mode
1: 1920x1080
2: 1280x1024

[RieGo]

same problem here with cut off window. only using 1 monitor @ 2560*1080 / Windows 10 / 100% DPI

[AMED]

Hi stax76

I was hoping you could add support for a debanding filter for Vapoursynth and Avisynth in a future release.

flash3kyuu_deband 2.0pre2 (http://forum.doom9.org/showthread.php?p=1712577#post1712577) supports both VS and AVIsynth.

Thank you for all your had work on this excellent tool.

[stax76]

@Lupissimo, telarium, RieGo

You can use scripting (main menu > Tools > Scripting) to get the DPI values for both screens, script code:

using static StaxRip.ShortcutModule;
dynamic app = Scripting.App;
var graphics = g.MainForm.CreateGraphics();
app.ShowMsg(graphics.DpiX.ToString() + "/" + graphics.DpiY.ToString());
graphics.Dispose();

[Lupissimo]

Cannot find "scripting" under tools, only scripts. When I click on that the explorer open and shows 2 files. Why do you need to use StaxRip to find the Monitor DPI?

[RieGo]

@Lupissimo, telarium, RieGo

You can use scripting (main menu > Tools > Scripting) to get the DPI values for both screens, script code:


i got "96/96"

Cannot find "scripting" under tools, only scripts. When I click on that the explorer open and shows 2 files. Why do you need to use StaxRip to find the Monitor DPI?

just create a new text file in that folder and call it something like dpi.csx.
fill it with the code and you can run it from scripts menu.
that's how i did it.

[stax76]

i got "96/96"

And if you move StaxRip to the other screen and call it from there?

[Lupissimo]

I get 96/96 from both monitors

[thomy22]

The window in the new test version is too small. How can I reset this?

http://fs5.directupload.net/images/161031/pyaso2yi.jpg

[stax76]

I'll try to implement PROCESS_PER_MONITOR_DPI_AWARE instead of PROCESS_SYSTEM_DPI_AWARE, I hope it can work without rounding errors messing up the layout.

https://msdn.microsoft.com/en-us/library/windows/desktop/dn280512(v=vs.85).aspx

[RieGo]

And if you move StaxRip to the other screen and call it from there?

i personally have only one screen connected :)

[telarium]

@Lupissimo, telarium, RieGo

You can use scripting (main menu > Tools > Scripting) to get the DPI values for both screens, script code:

using static StaxRip.ShortcutModule;
dynamic app = Scripting.App;
var graphics = g.MainForm.CreateGraphics();
app.ShowMsg(graphics.DpiX.ToString() + "/" + graphics.DpiY.ToString());
graphics.Dispose();

96/96 on all three monitors.

[SaboraPie]

Why not use all CPU cores at full when encore with x265 (or x264)? It is always about 60% only. Although saturate the CPU, I prefer get some FPS.
Is there any way to do it?

[Magik Mark]

Guys,

Windows clipping started happening to me as well. Did you find a work around while waiting for an updated version?

[Lupissimo]

When I disable the 2nd monitor it is OK in my setup

[Magik Mark]

I only have 1 monitor in the first place

[Yanak]

I have 3 screens, switching between them and having at most a dual monitor setup, never having a 3 screen connected at the same time, mostly running on a 1920x1080 for main screen and a 1024x1280 set in portrait mode as second screen , the third one is a 1920x1080 connected through HDMI, using it as a display for movies and only from times to times.

https://s14.postimg.org/6wurjati9/60188320161101000047.png

Today i switched to the display of the main 1080p one with the 2nd 1080p one in extended and forgot to switch back to normal dual screen mode. When launching Staxrip i have the same issue as others.

Weird stuff if that it doesn't happen in single or dual screen mode when using the main 1080p alone or in combination with the 1024p one in portrait mode, Main connected in DVI, and the small one via a displayport to DVI adaptator, but when using both 1080p ones ( Main one in DVI and extended one connected in HDMI) i get the problem.

All screens reports 96/96 when using the script in previous page, scaling is at 100% for all screens, on a 7970Ghz and win7.

Should have tested this before when testing the various scaling issues, sorry for noticing this only now.

[stax76]

I figured out that the form size gets cut at screen size before scaling happens, I have to go back to the initial 144 DPI at design time which not only means revoking much of recent work but also having to change resolution and zoom every time I want to use the WinForms designer. Working with WinForms using a 4K display is a sad situation I'm afraid, I wish now having used WPF since day one.

[Winston_Smith_101]

I would like to encode x265 on my dual Xeon CPU machine.
To use the nodes as effectively as possible I encode 2 movies at the same time. Movie a with node 0 and movie b with node 1. This works pretty good. But what to do when there is only one movie to encode?

Is it possible to cut the movie (only the video track) into two parts and encode part a with node 0 and part b with node 1 with staxrip? After that I would like to merge the parts and mux them with the audio tracks in "MKVToolNix Gui". I encode the audio tracks separately with another application.

How to cut the movie into two parts? I tried it with staxrip, but never succeeded. Is there a instruction manual?

[stax76]

The scaling issues are hopefully fixed now.

https://github.com/stax76/staxrip/blob/master/md/test-build.md

[Yanak]

Works fine on the 3 display screens now for me, thanks a lot for all the hard work Stax.

[Lupissimo]

Thank you for the update! The screens are ok now. I had to install the latest grafic driver to avoid a program crash.
Now I have the following problem trying to edit the container configuration ( throw out subtitles or attachments). There is no OK button to transfer the edited settings to the script.
I tried to overcome this by deselecting all subs, so that they are not extracted, in order to be able to cut the movie, but even though there are no subs in the temp directory, staxrip still does not allow processing due to subs not being able to be cut.

[stax76]

you are right, new build:

https://github.com/stax76/staxrip/blob/master/md/test-build.md

[mcjordan]

Dear Frank, would you include in the development new options of NVEncC 3.0.1?
(like a --vbr-quality --lookahead --enable-ltr --vpp-resize --vpp-gauss/knn/pmd etc./eg. my current encoding settings /HQ-HD/:
--vbr2 4428 --codec h265 --bframes 0 --ref 4 --qp-init 1 --aq --level 4.1 --output-buf 128
--cabac --no-deblock --mv-precision Q-pel --vbr-quality 1 --lookahead 32 --enable-ltr --fullrange)
Will be nice for owners of GTX 10xx.