eac3to - audio conversion tool

[nautilus7]

If it's only the last one or the last few ones and if they are all together smaller than 5MB, eac3to is automatically ignoring them. This doesn't seem to be the case here. Maybe it's one of the files in the middle. Or maybe it's the last one and it's bigger than 5MB. Either way, it might be worth to not only check which part is different but also to play that different part in a media player to understand why it's different...
Yes, I understand. So checking the files or playing back them is usually necessary in those cases. Thanks.

[madshi]

eac3to movie.m2ts -analyzeBitdepth
1: VC-1, 1080p24 /1.001 (16:9)
2: AC3, 5.1 channels, 640kbps, 48khz, dialnorm: -27dB
3: TrueHD/AC3, 5.1 channels, 48khz, dialnorm: -27dB
4: AC3, 5.1 channels, 640kbps, 48khz, dialnorm: -27dB
5: AC3, 2.0 channels, 192kbps, 48khz, dialnorm: -27dB
[a03] Extracting audio track number 3...
[a03] The sample sorter received a non-supported data format.
Aborted at file position 32768.
Is this with the latest version (v2.59)? If not, please update. If yes, could you please upload the first 10MB of that movie.m2ts file for me? Thanks!

[bmnot]

Is this with the latest version (v2.59)? If not, please update. If yes, could you please upload the first 10MB of that movie.m2ts file for me? Thanks!

Yes, v2.59. See http://www.mediafire.com/?iljevjdm3wq

[Thunderbolt8]

I got this with the analyzebitdepth command:

eac3to v2.59
command line: eac3to targetmoviefolder -analyzebitdepth
------------------------------------------------------------------------------
M2TS, 1 video track, 4 audio tracks, 2 subtitle tracks, 2:28:08
1: Chapters, 20 chapters
2: VC-1, 1080p24 (16:9)
3: DTS Master Audio, English, 5.1 channels, 16 bits, 48khz
4: DTS Master Audio, French, 5.1 channels, 16 bits, 48khz
5: TrueHD/AC3, English, 5.1 channels, 48khz, dialnorm: -27dB
6: TrueHD/AC3, French, 5.1 channels, 48khz, dialnorm: -27dB
7: Subtitle (PGS), French
8: Subtitle (PGS), French
[a04] The Arcsoft DTS Decoder only allows one operation at a time.

[stottle]

Mind if I ask a beginner question? With the 2.59 ability to add a ac3 core to truehd, eac3to can now modify all hd-dvd audio formats to look like blu-ray formats, right? And with pulldown removal, the same is true with the video?

If I have this correct, is there a program besides scenarist that will allow me to remux hd-dvd to blu-ray. (I'm worried about madshi's recent comment that tsmuxer doesn't handle truehd).

Sorry for the noob question. I was looking at converting to flac, but with the upcoming hdmi 1.3 audio cards coming out, I'd like to pass the audio to my receiver to decode so blu-ray format makes sense if it is possible.

[madshi]

Yes, v2.59. See http://www.mediafire.com/?iljevjdm3wq
Thanks. Will be fixed in the next build.

I got this with the analyzebitdepth command:

3: DTS Master Audio, English, 5.1 channels, 16 bits, 48khz
4: DTS Master Audio, French, 5.1 channels, 16 bits, 48khz
[a04] The Arcsoft DTS Decoder only allows one operation at a time.
As the eac3to output explains, you cannot decode two DTS tracks at the same time with the ArcSoft decoder. That means that with this specific m2ts file "-analyzeBitdepth" runs into trouble because in order to analyze the bitdepth the tracks must be decoded first. You can work around the issue by checking each track separately.

With the 2.59 ability to add a ac3 core to truehd, eac3to can now modify all hd-dvd audio formats to look like blu-ray formats, right?
Except E-AC3. Which you have to transcode to make it Blu-Ray compatible.

And with pulldown removal, the same is true with the video?
Yes, I think so.

If I have this correct, is there a program besides scenarist that will allow me to remux hd-dvd to blu-ray. (I'm worried about madshi's recent comment that tsmuxer doesn't handle truehd).
tsMuxeR, but as I said, it's been reported that TrueHD muxing doesn't work so well.

[madshi]

eac3to v2.60 released

http://madshi.net/eac3to.zip

* fixed: in v2.59 "-analyzeBitdepth" stopped working for Blu-Ray TrueHD tracks

[stottle]

Except E-AC3. Which you have to transcode to make it Blu-Ray compatible.

E-AC3 is optional for Blu-Ray, right (the eac3to wiki says so)? I'm using TMT, which supports E-AC3 I'm almost positive, so I don't need to transcode for this player, correct? Or do I need to transcode always?

Thanks!

[madshi]

E-AC3 is optional for Blu-Ray, right (the eac3to wiki says so)? I'm using TMT, which supports E-AC3 I'm almost positive, so I don't need to transcode for this player, correct? Or do I need to transcode always?
The m2ts container wants to have E-AC3 in a specific way which is not HD DVD compatible. Maybe you can still mux in HD DVD style E-AC3 tracks, but you would create a non-standard m2ts file this way. It may play with ArcSoft or maybe not. But I'd recommend to make your m2ts files standard conform to make sure they will play on every media player. But of course that's your decision.

[yonta]

Tried converting a TrueHD track from an HD DVD to a TrueHD/AC3 stream.
The log says "Applying RAW/PCM delay..." but the output filename is "Target DELAY -75ms.thd+ac3".
What about the delay?

[stottle]

The m2ts container wants to have E-AC3 in a specific way which is not HD DVD compatible.

Fair enough, I didn't know that.
But I'd recommend to make your m2ts files standard conform to make sure they will play on every media player.
I'll take your advice. Convert to AC3, or would you do it another way?

Thanks.

[madshi]

Tried converting a TrueHD track from an HD DVD to a TrueHD/AC3 stream.
The log says "Applying RAW/PCM delay..." but the output filename is "Target DELAY -75ms.thd+ac3".
What about the delay?
Hmmmmmm....... That's a good question. eac3to cannot delay TrueHD tracks, but it can delay raw/pcm/ac3 tracks. I think what probably happens is that the AC3 track interweaved with the TrueHD track will be delay corrected, but the TrueHD track not. Of course that's not a good solution. I guess I'll have to disable delay correction for the AC3 track interweaved track, too, so that both tracks are equally not corrected.

I'll take your advice. Convert to AC3, or would you do it another way?
That's your choice. AC3, DTS, LPCM, whatever you like.

[deacon crusher]

already know that 25, 28 and 29 are fine, they are the movie and I've run them through EAC3to and then joined the parts and works fine.

So, has to be the first or the last or both, or both versus the others. I know that 30 is one of those super short ones you've been trying to program around.

So, here's the output for first, one in the middle and last.

D:\kid movies\cj7>C:\eac3to\eac3to.exe E:\BDMV\STREAM\00011.m2ts
M2TS, 1 video track, 6 audio tracks, 10 subtitle tracks, 0:00:23
1: h264/AVC, 1080p24 /1.001 (16:9)
2: TrueHD/AC3, Chinese, 5.1 channels, 48khz
3: TrueHD/AC3, English, 5.1 channels, 48khz
4: AC3, Thai, 5.1 channels, 640kbps, 48khz, dialnorm: -29dB
5: AC3, Chinese, 2.0 channels, 192kbps, 48khz, dialnorm: -26dB
6: TrueHD/AC3, French, 5.1 channels, 48khz
7: AC3, Chinese, 5.1 channels, 640kbps, 48khz
8: Subtitle (PGS), English
9: Subtitle (PGS), English
10: Subtitle (PGS), French
11: Subtitle (PGS), Chinese
12: Subtitle (PGS), Korean
13: Subtitle (PGS), Thai
14: Subtitle (PGS), Arabic
15: Subtitle (PGS), Indonesian
16: Subtitle (PGS), English
17: Subtitle (PGS), French

D:\kid movies\cj7>C:\eac3to\eac3to.exe E:\BDMV\STREAM\00125.m2ts
M2TS, 1 video track, 6 audio tracks, 10 subtitle tracks, 0:06:59
1: h264/AVC, 1080p24 /1.001 (16:9)
2: TrueHD/AC3, Chinese, 5.1 channels, 48khz
3: TrueHD/AC3, English, 5.1 channels, 48khz
4: AC3, Thai, 5.1 channels, 640kbps, 48khz, dialnorm: -29dB
5: AC3, Chinese, 2.0 channels, 192kbps, 48khz, dialnorm: -26dB
6: AC3, Chinese, 5.1 channels, 640kbps, 48khz
7: TrueHD/AC3, French, 5.1 channels, 48khz
8: Subtitle (PGS), English
9: Subtitle (PGS), English
10: Subtitle (PGS), French
11: Subtitle (PGS), Chinese
12: Subtitle (PGS), Korean
13: Subtitle (PGS), Thai
14: Subtitle (PGS), Arabic
15: Subtitle (PGS), Indonesian
16: Subtitle (PGS), English
17: Subtitle (PGS), French

D:\kid movies\cj7>C:\eac3to\eac3to.exe E:\BDMV\STREAM\00130.m2ts
M2TS, 1 video track, 6 audio tracks, 10 subtitle tracks, 0:00:22
1: h264/AVC, 1080p24 /1.001 (16:9)
2: TrueHD/AC3, Chinese, 5.1 channels, 48khz
3: TrueHD/AC3, English, 5.1 channels, 48khz
4: AC3, Thai, 5.1 channels, 640kbps, 48khz, dialnorm: -29dB
5: AC3, Chinese, 2.0 channels, 192kbps, 48khz, dialnorm: -26dB
6: AC3, Chinese, 5.1 channels, 640kbps, 48khz
7: TrueHD/AC3, French, 5.1 channels, 48khz
8: Subtitle (PGS), English
9: Subtitle (PGS), English
10: Subtitle (PGS), French
11: Subtitle (PGS), Chinese
12: Subtitle (PGS), Korean
13: Subtitle (PGS), Thai
14: Subtitle (PGS), Arabic
15: Subtitle (PGS), Indonesian
16: Subtitle (PGS), English
17: Subtitle (PGS), French

So, the first one changes the order of the audio streams.

Interesting, but unhelpful for me <G> hopefully helpful for you.

Thanks for all your amazing work.

Set eac3to lose on the separate m2ts parts (listed in "[]", e.g. for playlist 1 it's 00011.m2ts, 00125.m2ts, 00128.m2ts, 00129.m2ts and 00130.m2ts). I'm sure that eac3to has a good reason to complain. Some of these m2ts parts must have a different video or audio track listing compared to the other parts. Joining m2ts parts with different track lists can't work properly. So you need to find out which parts are different. Then we can go from there...

[rica]

Hi guys, wiki how to guide:

http://en.wikibooks.org/wiki/Eac3to/How_to_Use

[sehgal.v7]

* extension ".thd+ac3" is supported now to define destination format
* TrueHD tracks without AC3 core can be converted to TrueHD/AC3 now
* demuxing a single-part Blu-Ray title keeps the original "TrueHD/AC3" data

:thanks::thanks::thanks::thanks::thanks:

Thanks a lot bro.

[Jan Marijniszoon]

* extension ".thd+ac3" is supported now to define destination format
* TrueHD tracks without AC3 core can be converted to TrueHD/AC3 now
* demuxing a single-part Blu-Ray title keeps the original "TrueHD/AC3" data
* demuxing a multi-part Blu-Ray title automatically redoes the AC3 substream
* added workaround for Blu-Ray playlists with multiple last "invalid" parts
* fixed: "-check" didn't work for LPCM tracks



I must be dreaming man! Thank you very much for these super fine new abilities!

[madshi]

So, the first one changes the order of the audio streams.

Interesting, but unhelpful for me <G> hopefully helpful for you.
Could you please upload 00011.m2ts and 00130.m2ts for me? Those two seem to be really small. Thanks!

[sehgal.v7]

Jus saw today that this thread is the largest thread in Doom9 Forum, containing 6,021 replies!!
Cheers.

[G_M_C]

Hi guys, wiki how to guide:

http://en.wikibooks.org/wiki/Eac3to/How_to_Use

-core, "extract the DTS core of a DTS-HD track"

I remember using this switch on a TrueHD track (HDScape HDWindow), to extract the core AC3; That worked fine afaik.

[rica]

-core, "extract the DTS core of a DTS-HD track"

I remember using this switch on a TrueHD track (HDScape HDWindow), to extract the core AC3; That worked fine afaik.

I got the core dts from a dts-hd source. (-core) option is working for dts as well..

[G_M_C]

I got the core dts from a dts-hd source. (-core) option is working for dts as well..

;)

I mentioned this so that this info can be added to the wiki (where only the DTS-extraction is mentioned).

[yonta]

I mentioned this so that this info can be added to the wiki (where only the DTS-extraction is mentioned).

-core option is only for DTS core extraction.
AC3 track from a Blu-ray TrueHD/AC3 stream can be extracted by a simple command like below.

eac3to xxxxx.m2ts 3: target.ac3

[G_M_C]

-core option is only for DTS core extraction.
AC3 track from a Blu-ray TrueHD/AC3 stream can be extracted by a simple command like below.

eac3to xxxxx.m2ts 3: target.ac3

Ah, i see. That explains why my use of -core worked, because I used target.ac3 offcourse ;)

[rack04]

How does eac3to retreive the version of mkvtoolnix that is installed? I have updated to the latest beta and it still complains that a new version exists. Thanks.

[yonta]

How does eac3to retreive the version of mkvtoolnix that is installed? I have updated to the latest beta and it still complains that a new version exists. Thanks.

This was answered a few pages back.

I also have the latest beta(Aug 21).

f:\Movie.Utilz\MKVtoolnix>mkvmerge.exe --version
mkvmerge v2.2.0 ('Turn It On Again') built on Aug 19 2008 15:59:25

[rica]

Hi madshi, how would you edit wiki, i really wonder?

Especially after the latest versions?

[nautilus7]

Hi madshi, how would you edit wiki, i really wonder?

Especially after the latest versions?The wiki is basically developed by me, not madshi. Everyone is welcome to contribute, of course. That's why it is in the wiki in the first place. I would appreciate if you contact me (by pm) if you are willing to contribute. :)

[rica]

The wiki is basically developed by me, but of course everyone is welcome to contribute. That's why it is in the wiki in the first place. I would appreciate if you contact me (by pm) if you are willing to contribute. :)

Cograts, it is really a very good job :thanks:

It would be great plasure to me to contribute but i have to do my homework first; i'll contact you.

Thanks again :)

[nautilus7]

Cograts, it is really a very good job :thanks:

It would be great pleasure to me to contribute but i have to do my homework first; i'll contact you.

Thanks again :)
Thank you. I 've been busy also, that's why it's not so up-to date. :rolleyes:

[odin24]

Are there any benefits to demuxing/remuxing with eac3to vs. tsMuxeR? I've been using tsMuxeR lately and demuxing through the MPLS file, this way I am ensured all multiple files (if any) are appended properly. I also have no interest muxing to mkv, only m2ts or Blu-ray.

I have also found eac3to an more GUI pretty useful... which uses tsMuxeR.

Thanks, O.

[rica]

Are there any benefits to demuxing/remuxing with eac3to vs. tsMuxeR? I've been using tsMuxeR lately and demuxing through the MPLS file, this way I am ensured all multiple files (if any) are appended properly. I also have no interest muxing to mkv, only m2ts or Blu-ray.

I have also found eac3to an more GUI pretty useful... which uses tsMuxeR.

Thanks, O.

The answer will be:
TSMuxer needs eac3to's help always but eac3to doesn't need any help of TSMuxer. :)
More job in one step...

To me, eac3to is a video demuxer, audio demuxer-converter while TSMuxer is just a muxer anymore... (it is my opinion after the latest updates of eac3to)



_ _ _ _ _

[odin24]

The answer will be:
TSMuxer needs eac3to's help always but eac3to doesn't need any help of TSMuxer. :)
More job in one step...

To me, eac3to is a video demuxer, audio demuxer-converter while TSMuxer is just a muxer anymore... (it is my opinion after the latest updates of eac3to)



_ _ _ _ _

Great, a few more questions.
1. How does tsMuxeR need eac3to's help?
2. does decoding take place during demuxing or just converting?
3. Is quality comprimised when using tsMuxeR over eac3to, or is it just the same since tsMuxeR uses the help of eac3to?

Thanks again, O.

[nautilus7]

Main advantage of using eac3to over tsmuxer is with seamless branching Blu-rays. Those movies are split among multiple .m2ts files from which audio can overlap a little bit. This means that just joining them together (what tsmuxer does) will result in audio-video sync problems. On the contrary, eac3to is the only program available that can remove overlapping parts of the audio streams. So, I suggest treating your seamless Blu-rays with eac3to as first step.

Regarding quality between tsmuxer and eac3to (in removing pulldown, for example - not sure if tsmuxer can do that), don't know where tsmuxer stands, but I can tell for sure that eac3to is perfect. So, to put it simple... using eac3to you don't loose anything.

[odin24]

Main advantage of using eac3to over tsmuxer is with seamless branching Blu-rays. Those movies are split among multiple .m2ts files from which audio can overlap a little bit. This means that just joining them together (what tsmuxer does) will result in audio-video sync problems. On the contrary, eac3to is the only program available that can remove overlapping parts of the audio streams. So, I suggest treating your seamless Blu-rays with eac3to as first step.

Regarding quality between tsmuxer and eac3to (in removing pulldown, for example - not sure if tsmuxer can do that), don't know where tsmuxer stands, but I can tell for sure that eac3to is perfect. So, to put it simple... using eac3to you don't loose anything.

Great, thanks for the input. I'm fairly new when comes to anything outside of audio conversion using eac3to. Is there any good guides or how-to's for eac3to? I see the link below but the link will not open.

Thanks, O

[odin24]

Hey nautilus7, have a look.

http://en.wikipedia.org/wiki/User_talk:Nautilus7

Nothing comes up on a search either.

[madshi]

Demuxing with eac3to vs. tsMuxeR:

(1) As nautilus7 said, eac3to fixes audio overlaps in seamless branching titles. tsMuxeR does not (AFAIK).

(2) eac3to automatically detects and fixes audio delays (when the audio stream begins earlier/later than the video stream). I don't know if tsMuxeR does that.

(3) eac3to automatically removes MPEG2, VC-1 and h264 pulldown from HD DVD video streams (29.97 -> 23.976). I'm not sure whether tsMuxeR does that, too. I've seen people reporting that they get stuttering problems with VC-1 movies when using tsMuxeR, only. Those people used vc1conv to remove the VC-1 pulldown and that fixed the problem for them. Now eac3to does the same thing as vc1conv for VC-1 streams. Also eac3to does the same thing as h264info for h264 streams.

(4) eac3to can transcode/modify HD DVD audio streams (e.g. E-AC3, TrueHD) to make them Blu-Ray/m2ts compatible. tsMuxeR can't do that. At least that's where tsMuxeR needs the help of eac3to.

[nautilus7]

Hey nautilus7, have a look.

http://en.wikipedia.org/wiki/User_talk:Nautilus7

Nothing comes up on a search either.http://en.wikibooks.org/wiki/eac3to (it's not finished... yet)

It was originally located in Wikipedia, but I received a warning/notification that the page didn't fit in Wikipedia. That's why I migrated it to Wikibooks.

[odin24]

Yeah, that was a warning/notification that the eac3to page didn't fit in Wikipedia. That's why I migrated to Wikibooks (a long time ago).

Oops, kinda new here. Thanks anyway.

Demuxing with eac3to vs. tsMuxeR:

(1) As nautilus7 said, eac3to fixes audio overlaps in seamless branching titles. tsMuxeR does not (AFAIK).

(2) eac3to automatically detects and fixes audio delays (when the audio stream begins earlier/later than the video stream). I don't know if tsMuxeR does that.

(3) eac3to automatically removes MPEG2, VC-1 and h264 pulldown from HD DVD video streams (29.97 -> 23.976). I'm not sure whether tsMuxeR does that, too. I've seen people reporting that they get stuttering problems with VC-1 movies when using tsMuxeR, only. Those people used vc1conv to remove the VC-1 pulldown and that fixed the problem for them. Now eac3to does the same thing as vc1conv for VC-1 streams. Also eac3to does the same thing as h264info for h264 streams.

(4) eac3to can transcode/modify HD DVD audio streams (e.g. E-AC3, TrueHD) to make them Blu-Ray/m2ts compatible. tsMuxeR can't do that. At least that's where tsMuxeR needs the help of eac3to.

Great information, I'm liking this thread more and more. Time to start reading the novella that is this thread.

[baudi]

Demuxing with eac3to vs. tsMuxeR:

...

(4) eac3to can transcode/modify HD DVD audio streams (e.g. E-AC3, TrueHD) to make them Blu-Ray/m2ts compatible. tsMuxeR can't do that. At least that's where tsMuxeR needs the help of eac3to.

How can I make a compatible audio stream from an E-AC3 track to a DD+ Blu-Ray compatible? (i.e. command line)

Thank you very much Madshi.

[madshi]

How can I make a compatible audio stream from an E-AC3 track to a DD+ Blu-Ray compatible? (i.e. command line)
eac3to source.eac3 dest.ac3

[rica]

Demuxing with eac3to vs. tsMuxeR:

(1) As nautilus7 said, eac3to fixes audio overlaps in seamless branching titles. tsMuxeR does not (AFAIK).

(2) eac3to automatically detects and fixes audio delays (when the audio stream begins earlier/later than the video stream). I don't know if tsMuxeR does that.

(3) eac3to automatically removes MPEG2, VC-1 and h264 pulldown from HD DVD video streams (29.97 -> 23.976). I'm not sure whether tsMuxeR does that, too. I've seen people reporting that they get stuttering problems with VC-1 movies when using tsMuxeR, only. Those people used vc1conv to remove the VC-1 pulldown and that fixed the problem for them. Now eac3to does the same thing as vc1conv for VC-1 streams. Also eac3to does the same thing as h264info for h264 streams.

(4) eac3to can transcode/modify HD DVD audio streams (e.g. E-AC3, TrueHD) to make them Blu-Ray/m2ts compatible. tsMuxeR can't do that. At least that's where tsMuxeR needs the help of eac3to.

(5) Just one command line is enough for demuxing and transcoding.

(6) Just one command line is sufficient for merging feature_1.EVO+feature_2.EVO.

[rebkell]

I have a stupid question, how does eac3to fix gaps? Overlaps I sorta can see, but wonder what happens to/in the overlapped portions but I'm mostly wondering how exactly it works on gaps?

[nautilus7]

I have a stupid question, how does eac3to fix gaps? Overlaps I sorta can see, but wonder what happens to/in the overlapped portions but I'm mostly wondering how exactly it works on gaps?It repeats last part of the audio or fills with silence depending on how long the gap is. Not sure though (madshi correct me if i'm wrong). Good thing is that there's no movie with gaps till now..

[baudi]

eac3to source.eac3 dest.ac3

Making so I only got a standar ac3 file, not a DD+ Blu-Ray compliant.

Thank you again.

[nautilus7]

Making so I only got a standar ac3 file, not a DD+ Blu-Ray compliant.

Thank you again.Blu-ray allows E-AC3 only for tracks with more than 5.1 channels (7.1). And these tracks are 5.1 AC3 core with E-AC3 extensions for the additional channels.

[tebasuna51]

I found it. It's from Edward Scissorhands Blu-ray Disc. The movie menu states it is a 4.0 and eac3to a 3/1. That seems correct, except that the surround channel is empty (I checked a big part of the track to be sure about this).

Here (http://www.sendspace.com/file/e073sw) is a sample.

@nautilus7

This is a old post but now I understand your comment about the surround channel. Now I have ArcSoft DTS decoder and don't work fine with these atypical channel configuration.

My question is:
to decode this dts ma 3/1 sample do you use Sonic or ArcSoft decoder?

With -libav the surround channel is present, try:
eac3to yoursample31.dtshd output.wav -libav -1,2,0,3,4,5

With ArcSoft:
eac3to yoursample31.dtshd wrong_output.wav

the surround channel is empty, and is empty also with dts core:

eac3to yoursample31.dtshd core31.dts -core
eac3to core31.dts wrong_output.wav

[rica]

The file is not available anymore.

[tebasuna51]

With the help of Elektra999 I have dts samples (http://www.sendspace.com/file/0d5dbt)with atypical channel map.
The samples was encoded with DTS PRO SERIES SURROUND ENCODER.
Only 3/2.0 and 3/2.1 was encoded with Surcode.

AMODE Ch Arrangement+lfe Mask and MS channels order Detect-MaskCh eac3to libav remap ArcSoft problems
-------- - --------------- -------------------------- -------------------- ----------- ----------------
0b000010 2 L R 0x0003 FL FR 2.0 0x000B (1) not needed ok
0b000110 3 L R S 0x0103 FL FR BC 2/1 0x0103 ok not needed BC ch empty
4 L R S LFE 0x010B FL FR LF BC 2/1.1 0x010B (2) -0,1,3,2,4,5 BC ch empty (3)
0b001000 4 L R Ls Rs 0x0033 FL FR BL BR 2/2 0x0033 ok not needed BL+BR ch's empty
5 L R Ls Rs LFE 0x003B FL FR LF BL BR 2/2.1 0x003B (2) -0,1,4,2,3,5 LF ch empty
0b000101 3 C L R 0x0007 FL FR FC 3/0 0x000F (1)(2) -1,2,0,3,4,5 ok
4 C L R LFE 0x000F FL FR FC LF 3.1 0x000F (2) -1,2,0,3,4,5 ok
0b000111 4 C L R S 0x0107 FL FR FC BC 3/1 0x0107 (2) -1,2,0,3,4,5 BC ch empty
5 C L R S LFE 0x010F FL FR FC LF BC 3/1.1 0x010F (2) -1,2,0,4,3,5 LF same than BC
0b001001 5 C L R Ls Rs 0x0037 FL FR FC BL BR 5.0 0x003F (1)(2) -1,2,0,3,4,5 ok
6 C L R Ls Rs LFE 0x003F FL FR FC LF BL BR 5.1 0x003F ok already done ok

(1) Wrong mask, the correct mask can be easyly put based in detection
(2) When decoded with libav need remapping channels.
(3) Same remap than libav needed.

[nautilus7]

Well, tebashuna51 you're right. There's something really strange with this track.

My findings:

* ArcSoft and Sonic decode the DTS-HD MA track bit perfect
* ArcSoft decode the DTS core "similar" to the above
* Sonic decode the DTS core with lower volume
* In the above cases the surround channel is empty
* With Libav the surround channel is not empty
* With Libav channels needs remapping
* With Libav L,R,C channels are similar to ArcSoft core decoding

http://img214.imageshack.us/img214/4475/40dtshdgo2.th.png (http://img214.imageshack.us/my.php?image=40dtshdgo2.png)

I re-uploaded a sample (http://www.sendspace.com/file/wgdtbn) of this track.

[stottle]

The only part of converting an HD-DVD to Bluray that I can't figure out is how to convert the subtitle data (.sup) that eac3to produces to something that tsmuxer will take. Can anyone help me on this one?

Thanks