AutoMKV 0.95c - (DVD/TS/AVI/AVS to X264/XviD/WVC1 into MKV/MP4/WMV) update 12/02/2008

[survivant001]

@buzzwq

do you have plan to release a beta that will integrate tsmuxer 1.4.5 for the bluray output ? (and need to calculate the size for fitting it on a DVD5 :) )

thanks

[buzzqw]

@jult

check log.. also open the movie.avs in virtualdub.. got errors ?

@survivant001
maybe in next days
i really need to figure the overhead...

BHH

[Dante.Xaiver]

Below is my log it wont let me do any encoding it indexes then goes to x264 encoding stats twice goes through 2 passes lightening fast then stops and closes and im left back at the standard automkv window its usually always this problem or that damn crf not found problem telling me to get a new version of x264 i haven't been able to use this program now in months :mad:

19:37:54 Dgindex CMD: C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=80 -YR=2 -AIF=[D:\BLADE_TRINITY_EXTENDED\VIDEO_TS\VTS_01_1.vob] -OF=[C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie] -exit -minimize
19:39:56 D2V file size: 921403
19:39:56 Audio 1: movie t80 3_2ch 448kbps delay 0ms.ac3
19:39:56 Pre Audio 1' Size: 410927104 bytes
19:39:56 Renamed file movie t80 3_2ch 448kbps delay 0ms.ac3 to movie t80 3_2ch 448kbps delay 0ms_.ac3
19:39:56 Encoded 1' Audio Track: movie t80 3_2ch 448kbps delay 0ms_.ac3 410927104 bytes
19:39:56 D2V Film Detected: 99.900002% FILM found
19:39:56 Unable to determine movie proprierties , switched to DirectShowSource
19:39:56 Unable to determine movie proprierties with DirectShowSource, switched to FFmpegSource
19:39:57 Unable to determine movie proprierties with FFmpegSource. Now analyzing with MediaInfo
19:39:57 Aspect ratio: 1.778
19:39:57 Number of Frames: 40643
19:39:57 Framerate: 29.970
19:39:57 Movie length in Seconds: 1357
19:39:57 Movie Width/Height: 720/480
19:39:57 DgIndex AR: 1.778
19:39:57 Number of Frames: 40643
19:39:57 Framerate: 29.970
19:39:57 Movie length in Seconds: 1357
19:39:57 Movie Width/Height: 720/480
19:39:57 DgIndex AR: 1.778
19:39:57 Number of Frames: 40643
19:39:57 Framerate: 29.970
19:39:57 Movie length in Seconds: 1357
19:39:57 Movie Width/Height: 720/480
19:39:57 DgIndex AR: 1.778
19:39:57 Source is hybrid bff and tff at 0 bff and 0 tff.
19:39:57 Advanced Deinterlace Routines Log
19:39:57 Analyzed 0 sections of five frames
19:39:57 Found Interlace Sections: 0 -1.#J%
19:39:57 Found Progressive Sections:0 -1.#J%
19:39:57 Found Telecined Sections: 0 -1.#J%
19:39:57 Found Zero Mov: -1.#J% 0
19:39:57 Found One Mov: -1.#J% 0
19:39:57 Found Two Mov: -1.#J% 0
19:39:57 Found Three Mov: -1.#J% 0
19:39:57 Found Four Mov: -1.#J% 0
19:39:57 Found Five Mov: -1.#J% 0
19:39:57 Starting X264
19:39:57 Command Line 1' Pass X264: C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\encoder\x264.exe --pass 1 --bitrate 195192 --stats "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\.stats" --ref 1 --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --no-fast-pskip --filter -2,-1 --subme 2 --direct auto --vbv-maxrate 25000 --me dia --no-ssim --level 4.1 --merange 32 --b-pyramid --analyse none --threads auto --thread-input --sar 1:1 --output NUL "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie.avs"
19:39:57 Command Line 2' Pass X264: C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\encoder\x264.exe --pass 2 --bitrate 195192 --stats "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --no-fast-pskip --mixed-refs --trellis 2 --ref 16 --filter -2,-1 --subme 6 --direct auto --vbv-maxrate 25000 --me umh --no-ssim --level 4.1 --merange 32 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8,p4x4 --8x8dct --threads auto --thread-input --sar 1:1 --output "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie.264" "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie.avs"
19:40:00 Finished 1' Pass X264
19:40:03 X264 Final 2 Pass Encoding Stats:
19:40:04 "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\matroska\mkvmerge.exe" -o "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\BLADE_TRINITY_EXTENDED.mkv" --default-duration 0:30000/1001fps --track-name -1:"BLADE_TRINITY_EXTENDED" --aspect-ratio -1:1.500000 --chapters "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\chapters.txt" "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie.264" --language -1:eng --default-track -1:yes "C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie t80 3_2ch 448kbps delay 0ms_.ac3" --title "Done with AutoMKV 0.95 http://forum.doom9.org/showthread.php?p=854221 "
19:40:04 Final Muxed size: -1 bytes
19:40:04 Encoding finished: 00:00:04 elapsed time
19:40:04 -----------------------------------------------------------------------
19:40:04 Script movie.avs
19:40:04
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\AddGrain.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\autocrop.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\aWarpSharp(Pruned).dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\blockbuster.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\cnr2.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\ColorMatrix.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\Convolution3D.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\corrector.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\DctFilter.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\Decomb.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\Deen.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\degrainmedian.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\DGDecode.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\EEDI2.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\FFMpegSource.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\FFT3DFilter.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\FluxSmooth.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\frfun7.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\hqdn3d.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\LeakKernelDeint.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\MaskTools.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\medianblur.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\MipSmooth.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\MSharpen.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\mt_masktools.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\mvtools.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\NicAudio.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\RemoveGrainS.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\RepairS.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\SangNom.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\SimpleResize.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\SoundOut.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\TBilateral.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\TDeint.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\TIVTC.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\TomsMoComp.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\TTempSmooth.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\UnDot.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\UnFilter.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\VSFilter.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\warpsharp.dll")
19:40:04 #loadpluginstart
19:40:04
19:40:04 #test1
19:40:04
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\BlindDeHalo3_mt2.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\Deblock_QED_MT2.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\FastLineDarken 1.3 MT MOD.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\HybridFuPP.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\LanczosPlus.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\Lem.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\LimitedSharpenFaster.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\MCBob_v03c.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\mvbob.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\QMlib.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\seesaw.avsi")
19:40:04 Import("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\spresso.avsi")
19:40:04 #importstart
19:40:04
19:40:04 #test2
19:40:04
19:40:04 movie = mpeg2source("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie.d2v")
19:40:04 function getOrder(clip c) {
19:40:04 order = GetParity(c) ? 1 : 0
19:40:04 Return order }
19:40:04 #filter1start
19:40:04
19:40:04 #test3
19:40:04
19:40:04 last = movie
19:40:04 fixed_aspect = 1.000000
19:40:04 out_width = 720
19:40:04 out_height = 480
19:40:04 #resizestart
19:40:04
19:40:04 #test4
19:40:04
19:40:04 #filter2start
19:40:04
19:40:04 #test5
19:40:04
19:40:04 RemoveGrain(mode=2)
19:40:04 -----------------------------------------------------------------------
19:40:04 Script mkvmaudio.avs
19:40:04
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\NicAudio.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\SoundOut.dll")
19:40:04 LoadPlugin("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\exe\filter\FFmpegSource.dll")
19:40:04 NicAC3Source("C:\Documents and Settings\Administrator\Desktop\AUTOMKV\temp\movie t80 3_2ch 448kbps delay 0ms.ac3")
19:40:04 #Applying STEREO downmixing routines
19:40:04 function stereo(clip a)
19:40:04 {
19:40:04 flr = GetChannel(a, 1, 2)
19:40:04 fcc = GetChannel(a, 3)
19:40:04 lfe = GetChannel(a, 4)
19:40:04 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
19:40:04 mix = MergeChannels(lfc, lfc)
19:40:04 lrc = MixAudio(flr, mix, 0.2929, 1.0)
19:40:04 blr = GetChannel(a, 5, 6)
19:40:04 Return MixAudio(lrc, blr, 1.0, 0.2929)
19:40:04 }
19:40:04 #
19:40:04 6==Audiochannels() ? stereo() : last
19:40:04 function addvideo(clip c) {
19:40:04 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
19:40:04 Return audiodub(last,c)
19:40:04 }
19:40:04 Normalize()
19:40:04
19:40:04
19:40:04 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

[buzzqw]

@Dante.Xaiver

first of all move automkv out of desktop. move to a shorter path like c:\automkv

19:39:56 Unable to determine movie proprierties , switched to DirectShowSource
19:39:56 Unable to determine movie proprierties with DirectShowSource, switched to FFmpegSource
19:39:57 Unable to determine movie proprierties with FFmpegSource. Now analyzing with MediaInfo

open time.avs in virtualdub, what is the error ?

19:39:57 Found Interlace Sections: 0 -1.#J%
19:39:57 Found Progressive Sections:0 -1.#J%
19:39:57 Found Telecined Sections: 0 -1.#J%

are you sure you have installed avisynth ???

BHH

[jult]

@jult

check log.. also open the movie.avs in virtualdub.. got errors ?I'm not using any AVS filtering for this. (You should add an option to disable avs entirely, and just let it be staxrip on steroids..)
Vdub says on temp\movie.avs:

Avisynth open failure:
LoadPlugin: unable to load "C:\Base\V\AutoMKV\exe\filter\FFMpegSource.dll"
(B:\temp\movie.avs, line 15)

Here's the log (ffmpeg even crashed on me just now!).
Strange thing is, the source avi for this is a x264 lossless. One would assume x264 understand its own videos!

Also, I prefer --me esa and do --nr 50 so I use my own profile/commands for x264 (which it did not use.. :( ):

16:19:12 0.95c - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
16:19:12 OS Version: Windows Server 2003
16:19:12 Selected Input file: S:\mstb90.avi
16:19:12 Selected Output dir: B:\temp\
16:19:12 Selected Final Name: mstb90
16:19:12 Selected Container type: MKV
16:19:12 Selected Encoder: X264
16:19:12 Selected Size: 96 / 1
16:19:12 Selected Profile: 2_Pass_880kbitps.xml
16:19:12 Selected Resizer: NONE / Original
16:19:12 Selected Filters: NONE
16:19:12 Selected Deinterlacer: NONE
16:19:12 Selected Field Order: AUTO
16:19:12 Track Language 1: mstb90.avi
16:19:12 Audio Codec 1: Nero AAC
16:19:12 Audio Quality 1: 0.80
16:19:12 Audio Channel 1: Stereo
16:19:12 Track Language 2: NONE
16:19:12 Audio Codec 2: Nero AAC
16:19:12 Advanced Audio Settings DUMP Track 1
16:19:12 Nero Option Profiles: AUTO --- Encoding Mode: Quality
16:19:12 CCT Option Profiles: AUTO --- Channel Options: AUTO
16:19:12 Lame Settings: ABR
16:19:12 Audio Normalization: 1
16:19:12 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
16:19:12
16:19:45 Unable to determine movie proprierties , switched to DirectShowSource
16:23:27 0.95c - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
16:23:27 OS Version: Windows Server 2003
16:23:27 Selected Input file: S:\mstb90.avi
16:23:27 Selected Output dir: B:\temp\
16:23:27 Selected Final Name: smart
16:23:27 Selected Container type: MKV
16:23:27 Selected Encoder: X264
16:23:27 Selected Size: 120 / 1
16:23:27 Selected Profile: 2_Pass_max_900kbitps.xml
16:23:27 Selected Resizer: NONE / Original
16:23:27 Selected Filters: NONE
16:23:27 Selected Deinterlacer: NONE
16:23:27 Selected Field Order: AUTO
16:23:27 Track Language 1: mstb90.avi
16:23:27 Audio Codec 1: Nero AAC
16:23:27 Audio Quality 1: 1.00
16:23:27 Audio Channel 1: Stereo
16:23:27 Track Language 2: NONE
16:23:27 Audio Codec 2: Nero AAC
16:23:27 Advanced Audio Settings DUMP Track 1
16:23:27 Nero Option Profiles: AUTO --- Encoding Mode: Quality
16:23:27 CCT Option Profiles: AUTO --- Channel Options: AUTO
16:23:27 Lame Settings: ABR
16:23:27 Audio Normalization: 1
16:23:27 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
16:23:27
16:24:45 Number of Frames: 22303
16:24:45 Framerate: 25.000000
16:24:45 Movie length in Seconds: 893
16:24:45 Movie Width/Height: 640/480
16:24:45 Encoding B:\temp\mstb90.avi to NeroAAC with 1.00 quality
16:32:22 Encoded 1' Audio Track: mstb90.mp4 41853576 bytes
16:32:22 Starting X264
16:32:22 Command Line 1' Pass X264: C:\Base\V\AutoMKV\exe\encoder\x264.exe --pass 1 --bitrate 747 --stats "B:\temp\.stats" --ref 1 --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --no-fast-pskip --nr 50 --filter -2,-1 --subme 2 --direct auto --vbv-maxrate 25000 --me dia --no-ssim --level 4.1 --merange 32 --b-pyramid --analyse none --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output NUL "B:\temp\movie.avs"
16:32:22 Command Line 2' Pass X264: C:\Base\V\AutoMKV\exe\encoder\x264.exe --pass 2 --bitrate 747 --stats "B:\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --no-fast-pskip --nr 50 --mixed-refs --trellis 2 --ref 16 --filter -2,-1 --subme 6 --direct auto --vbv-maxrate 25000 --me esa --no-ssim --level 4.1 --merange 32 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8,p4x4 --8x8dct --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output "B:\temp\movie.264" "B:\temp\movie.avs"
16:32:25 Finished 1' Pass X264
16:32:28 X264 Final 2 Pass Encoding Stats:
16:32:33 BREAK ! FILE NOT SUPPORTED ! LAST TRY WITH FFMPEG!
16:32:33 Switched to FFmpeg for Video Encoding!
16:32:33 FFmpeg.exe String: "C:\Base\V\AutoMKV\exe\BeSweet\ffmpeg.exe" -an -pass 1 -r 25.000 -threads 2 -i "S:\mstb90.avi" -vcodec libx264 -bf 3 -b 747000 -s 640x480 -an -partitions all -deblockalpha -2 -deblockbeta -1 -directpred 2 -refs 6 -brdo -wpred -bpyramid -mixed_refs -dct8x8 -o -y "B:\temp\movie.mp4"
16:32:33 FFmpeg.exe String: "C:\Base\V\AutoMKV\exe\BeSweet\ffmpeg.exe" -an -pass 2 -r 25.000 -threads 2 -i "S:\mstb90.avi" -vcodec libx264 -bf 3 -b 747000 -s 640x480 -an -partitions all -deblockalpha -2 -deblockbeta -1 -directpred 2 -refs 6 -brdo -wpred -bpyramid -mixed_refs -dct8x8 -o -y "B:\temp\movie.mp4"
16:32:55 Fished FFmpeg Encoding!
16:32:55 "C:\Base\V\AutoMKV\exe\matroska\mkvmerge.exe" -o "B:\temp\smart.mkv" --default-duration 0:25000/1000fps --track-name -1:"smart" --aspect-ratio -1:1.333333 "B:\temp\movie.264" --language -1:und --default-track -1:yes "B:\temp\mstb90.mp4" --title "Done with AutoMKV 0.95c http://forum.doom9.org/showthread.php?t=134478 "
16:32:55 Final Muxed size: -1 bytes
16:32:55 Encoding finished: 00:00:30 elapsed time
16:32:55 -----------------------------------------------------------------------
16:32:55 Script AutoCrop.log
16:32:55
16:32:55 Crop(0,0,640,480)
16:32:55 -----------------------------------------------------------------------
16:32:55 Script movie.avs
16:32:55
16:32:55 #loadpluginstart
16:32:55
16:32:55 #test1
16:32:55
16:32:55 #importstart
16:32:55
16:32:55 #test2
16:32:55
16:32:55 movie = avisource("S:\mstb90.avi",audio=false)
16:32:55 movie = isRGB(movie) ? ConvertToYV12(movie,interlaced=true) : movie
16:32:55 movie = isYUY2(movie) ? ConvertToYV12(movie,interlaced=true) : movie
16:32:55 function getOrder(clip c) {
16:32:55 order = GetParity(c) ? 1 : 0
16:32:55 Return order }
16:32:55 #filter1start
16:32:55
16:32:55 #test3
16:32:55
16:32:55 last = movie
16:32:55 fixed_aspect = 1.333300
16:32:55 out_width = 640
16:32:55 #Aspect_Error = -0.003%
16:32:55 out_height = 480
16:32:55 #resizestart
16:32:55
16:32:55 #test4
16:32:55
16:32:55 #filter2start
16:32:55
16:32:55 #test5
16:32:55
16:32:55 return last
16:32:55 -----------------------------------------------------------------------
16:32:55 Script mkvmaudio.avs
16:32:55
16:32:55 LoadPlugin("C:\Base\V\AutoMKV\exe\filter\NicAudio.dll")
16:32:55 LoadPlugin("C:\Base\V\AutoMKV\exe\filter\SoundOut.dll")
16:32:55 LoadPlugin("C:\Base\V\AutoMKV\exe\filter\FFmpegSource.dll")
16:32:55 DirectShowSource("S:\mstb90.avi",fps=25.000000,convertfps=true,video=false)
16:32:55 #Applying STEREO downmixing routines
16:32:55 function stereo(clip a)
16:32:55 {
16:32:55 flr = GetChannel(a, 1, 2)
16:32:55 fcc = GetChannel(a, 3)
16:32:55 lfe = GetChannel(a, 4)
16:32:55 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
16:32:55 mix = MergeChannels(lfc, lfc)
16:32:55 lrc = MixAudio(flr, mix, 0.2929, 1.0)
16:32:55 blr = GetChannel(a, 5, 6)
16:32:55 Return MixAudio(lrc, blr, 1.0, 0.2929)
16:32:55 }
16:32:55 #
16:32:55 6==Audiochannels() ? stereo() : last
16:32:55 function addvideo(clip c) {
16:32:55 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
16:32:55 Return audiodub(last,c)
16:32:55 }
16:32:55 Normalize()
16:32:55
16:32:55 Soundout(output="cmd",type=1,format=3,autoclose=true,executable="C:\Base\V\AutoMKV\exe\besweet\neroaacenc.exe",prefilename=" -ignorelength -q 1.00 -if - -of audio.mp4",postfilename="",nofilename=true,showoutput=false)
16:32:55
16:32:55 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

But don't really bother, I have already used MeGUI for this.

[chappy16775]

I'm having a problem with setting a custom filesize. I'm converting DVD's to MKV's. I try to set it to 4gb but the filesize always ends up much bigger. I tried inputting both 4000 and 4000000 in the custom file box but no luck.

I'm using:
- HighQuality_Slower
- Lanczos resize
- Auto width
- Anamorphic

Any ideas?
Thanks

[buzzqw]

@jult
even my pc is a win2k3 server.. and i have no problem with ffmpegsource
... don't know sorry
about dss failing.. be sure to install latest ffdshow

@chappy16775
post a log :)

BHH

[erlend]

I have a very newbie question, I guess..
I have encoded a few dvd's with autoMKV 0.95c, exactly like the guide at http://www.kayakingcoach.com/GUIDE.htm.
With MPC HC 1.1.0.0 I have perfect sound, perfect subtitle but NO picture...
Is this a problem with MPC HC or the encoding by automkv?
Where shall I start searching for the problem?:confused:

[buzzqw]

@erlend

First of All Welcome to the Forum!

i suggest to install (as described in first post of this thread) ffdshow and haali media splitter

BHH

[Barleyman]

Some cropping complaints -

I have DVB captures with black bars. Sometimes even several as BBC had this brilliant idea about "compromise" aspect ratio of 15:10 (or something like that)

So now when I hit preview, I can pause the video, relocate it to suitable position and I can set good mod8 crop values.

However, the SIZE value is NOT updated and .95c plonks the original (or stretched for anamorphic) value to the "specify width x height" boxes. Also "autocrop and autoresize"-box is ticked.

So if I interpret all that correctly, I'd get black bars cropped (good) and then UPSCALED back to original resolution possibly messing the AR (bad)

Ticking "manual crop" box and unticking "crop + resize" forgets the values in the boxes. Minor but annoying inconvenience.

[Barleyman]

Another annoyance:

The test deint fires two x264 passes to determine if we're interlaced or not. So far so good. However, 2nd pass is sloooow, like 15 minutes!


Also the CPU of X2 athlon is only used by about 25-30% (http://personal.inet.fi/koti/ohramies/2008/interlace.png)

[buzzqw]

@Barleyman

So if I interpret all that correctly, I'd get black bars cropped (good) and then UPSCALED back to original resolution possibly messing the AR (bad)

correct. Just simply scale down resolution to what you want

The test deint fires two x264 passes to determine if we're interlaced or not. So far so good. However, 2nd pass is sloooow, like 15 minutes!

nothing much to do. Deinterlacer process is a 2 pass work. On first is determined if frame is tff/bff, the second determine the pattern (interlaced or not).
The second work actually cannot be faster.. but i can keep busy all cpus if you want (it's a matter of analyze a bigger resolution..., you will not get a better analysis but all cores will be busy)

BHH

[SimonM]

@buzzqw

Would it be possible to integrate support for a third audio track. As for some files I would need to have such a third track. It looks like it is not impossible as my search showed me that AutoGK or MEGui do have the possibility to use more than two audio tracks. But I wouldn´t be surprised if this was a awful lot of work to program and therefore it is left out. It is a question out of curiosity.

I´ve got another question regarding the useable codecs. Is there a possibility to use the divx codec for the processing of files with AutoMKV and if not here comes my noob question.

@all
Is there any quality difference at all between DivX 6.8 Pro and the current Xvid release? As I heard there was none, but since then the DivX encoder evolved from 6.3 to 6.8.

Unfortunately I am not that familiar with encoding so pleas forgive me that possible noob question.

Edit: How can I use a "custom Profile" where I can set main parameters like bitrate. I.E. is there a profile where I can check a specific bitrate instead of an quantitizer? If not, what quantitizers could be recomended for Xvid and x264 encoding a DVD source file? BTW did i get it right, the lower the quantitizer number the higer the bitrate and the quality.

One more question is there any benefit in the quality/size ratio if I am using 1 - pass CBR compared to two pass encoding if there is no need to meet a specific filesize?

[fateman]

you can select 1, 2 or ALL audio tracks.. not 3
BHHI don't see an option to copy all audio tracks - where is that?

[fateman]

I don't see an option to copy all audio tracks - where is that?
Ah, reloaded the IFO with the option "Process this ifo" selected, now it shows All Audio Tracks

[Barleyman]

@Barleyman
correct. Just simply scale down resolution to what you want


I don't know if the crop window-applet is something you wrote, but wouldn't it be more logical the size would automagically adjust to whatever value you cropped the video to?

OK, of course I can adjust the size but I guess I'd rather play safe and enter the values again to the crop boxes after choosing "crop only" ..

nothing much to do. Deinterlacer process is a 2 pass work. On first is determined if frame is tff/bff, the second determine the pattern (interlaced or not).
The second work actually cannot be faster.. but i can keep busy all cpus if you want (it's a matter of analyze a bigger resolution..., you will not get a better analysis but all cores will be busy)
BHH

Seems a bit counterintuitive it can't be faster.. What's the actual holdup here? Analysis filter?

I suppose fastest way remains using eyeball mk1 to check the video manually. Broadcast flags and DVD flags seem to be nonsense more often than not, unfortunately.

Going back to xvid multicore for a bit, does the default of "0" threads use some kind of autodetect by xvid_encraw?

[buzzqw]

@SimonM
about third audio.. as i said (as for fateman) actually the support is for 1, 2, or ALL audio tracks . i don't think to change it
Is there a possibility to use the divx codec for the processing of files with AutoMKV and if not here comes my noob question.
next version (0.96) will have support for DivX! (6.8 pro)


@Barleyman
OK, of course I can adjust the size but I guess I'd rather play safe and enter the values again to the crop boxes after choosing "crop only" ..
i added a show resized even for more controlling

I suppose fastest way remains using eyeball mk1 to check the video manually. Broadcast flags and DVD flags seem to be nonsense more often than not, unfortunately.
yea, that's for sure. Deinteralce analysis isn't perfect but do it's job, and will not spend more then 10 minutes

oing back to xvid multicore for a bit, does the default of "0" threads use some kind of autodetect by xvid_encraw?
yes, 1 thread for logical processor

BHH

[fateman]

@SimonM
about third audio.. as i said (as for fateman) actually the support is for 1, 2, or ALL audio tracks . i don't think to change itI really hope you reconsider because I see many, many times I will use just 3 audio tracks or just 4, as opposed to the available 5-8 on some DVDs these days

[AMED]

I really hope you reconsider because I see many, many times I will use just 3 audio tracks or just 4, as opposed to the available 5-8 on some DVDs these daysWhy don't you re-author the DVD so just the audio tracks you want are there and then use AutoMKV's All Audio Tracks.

[fateman]

Why don't you re-author the DVD so just the audio tracks you want are there and then use AutoMKV's All Audio Tracks.I guess I'll just use DVD Shrink...

[delacroixp]

@SimonM
about third audio.. as i said (as for fateman) actually the support is for 1, 2, or ALL audio tracks . i don't think to change it

I really hope you reconsider because I see many, many times I will use just 3 audio tracks or just 4, as opposed to the available 5-8 on some DVDs these days
I guess I'll just use DVD Shrink...
You might consider a slightly more "hands-on" approach by manually demuxing the extra tracks or manually encoding the audio with BeSweet/BeLight and muxing (http://www.kamiwa.de/node/4) your preferred choice.

It's also an opportunity to finetune your encoding skills.


:):devil::D
Pascal

[Honeyko]

Suppose, in AutoMKV, I perform an XviD single pass at CQ3 with "100% Quality" checked in advanced settings. I then note the resultant file-size and enter it in the output size box for a 2-Pass "Insane Quality".

Q. Assuming all other settings (filters, etc) remain the same, will a 2-Pass of output size XYZmb be of discernibly higher quality than a CQ of size XYZmb? (IOW, am I getting anything for tripling the encoding time?)

[SimonM]

I was asking myself exactly the same question as you can see above, also I might not have formulated as clear as you.

Anyway it would be very interesting to hear an answer

[vorob]

Why there is no possibility to put x264 in Avi container? I saw a lot of HD videos in this codec in this container.

[vorob]

And why your program doesn’t read the audio steam list from file? I’ve got MKV film with ENG and RUS audio tracks, so to convert all this into avi I have had to unpack mkv in video, eng audio and Russian audio files (3files) and then all this add in you prog.

[valnar]

Why there is no possibility to put x264 in Avi container? I saw a lot of HD videos in this codec in this container.

Why do you want to use AVI? It's very limited and outdated. MKV and MP4 are better in almost every way.

Robert

[buzzqw]

. Assuming all other settings (filters, etc) remain the same, will a 2-Pass of output size XYZmb be of discernibly higher quality than a CQ of size XYZmb? (IOW, am I getting anything for tripling the encoding time?)

simply NO.

100% quality mean all quant at 2, so will be not possible (without tweaking the profile) to get better quality, even if in 2 pass profile you double the final size

Why there is no possibility to put x264 in Avi container?
it's not correct. x264 loose much of it's potential in avi.
you can also read the sticky of mpeg4-avc forum

And why your program doesn’t read the audio steam list from file?

actually isn't supported. from avi/mkv/mp4 stream only the first audio is processed.
maybe in a future update

BHH

[SimonM]

simply NO.

100% quality mean all quant at 2, so will be not possible (without tweaking the profile) to get better quality, even if in 2 pass profile you double the final size

BHH

And what is the matter with any quant above 2 or 100% quality - lets say with 75% quality? Will there be a difference. I am just wondering as I am not that familiar with encoding. But as exact filsize is not that important to me the next thing to decide up on is time taken for coding.

So thank you for an answer.

[weaver4]

And what is the matter with any quant above 2 or 100% quality - lets say with 75% quality? Will there be a difference. I am just wondering as I am not that familiar with encoding. But as exact filsize is not that important to me the next thing to decide up on is time taken for coding.

So thank you for an answer.

If you do a single pass at 75% and get the filesize then use that filesize to do a two pass the results should be better. But, I have tried it many, many times and I don't see any difference whatsoever. So it appears that it does not make enough difference to notice. I do all my encoding, like many others, in single pass.

[Cyrus221]

Hey buzz, have a suggestion for you!

Is there anyway you can ungrey the input area? It would be Sooooooo much easier to que files! I usually have all my files as 01, 02, 03, etc etc, but having to que > add > find file is much more monotonous than just replacing a single digit in the input box and hitting the 'add que' button. Thanks man, your work is top notch!

[lubczyk]

I've got an old MKV file with h264 video, OGG audio and SSA subtitles.

Is there anyway that I can not reencode the video using the GUI? I'm just trying to mux it into MP4, hardsub the video and reencode the audio only.

I'm trying to create workflow for playing back my files on the PS3.

[arrirc]

Hello

Please help....

The log window said that the job was finished but I could not find any output :(

I have the option of "deleting the Temp files after the job"- enabled.

Where is the output?

Here is the log

00:21:16 Dgindex CMD: D:\Applications\2. Video Tools\AutoMKV\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=80 -YR=2 -AIF=[E:\FISTFUL_OF_DYNAMITE_CE\VIDEO_TS\VTS_03_1.vob] -OF=[K:\Movies\A Fistful Of Dynamite\temp\movie] -exit -minimize
00:25:55 D2V file size: 1181799 bytes
00:25:55 Audio 1: movie t80 3_2ch 448kbps delay 0ms.ac3
00:25:55 Pre Audio 1' Size: 527252992 bytes
00:25:55 Applying DelayAudio of 0 to audio file: movie t80 3_2ch 448kbps delay 0ms.ac3
00:25:55 Encoding K:\Movies\A Fistful Of Dynamite\temp\movie t80 3_2ch 448kbps delay 0ms.ac3 to NeroAAC with custom command line
00:34:22 2 Pass encoding Audio 1 track: D:\Applications\2. Video Tools\AutoMKV\exe\BeSweet\neroaacenc.exe -br 160000 -ignorelength -2pass -if audio.wav -of "movie t80 3_2ch 448kbps delay 0ms.mp4"
00:48:10 Encoded 1' Audio Track: movie t80 3_2ch 448kbps delay 0ms.mp4 1257443 bytes
00:48:11 D2V Film Detected: 99.900002% FILM found
00:48:16 Number of Frames: 282175
00:48:16 Framerate: 29.970030
00:48:16 Movie length in Seconds: 9416
00:48:16 Movie Width/Height: 720/480
00:48:16 DgIndex AR: 16:9
00:57:55 Source is declared tff by a margin of 200/2.
00:57:55 Advanced Deinterlace Routines Log
00:57:55 Analyzed 1095 sections of five frames
00:57:55 Found Interlace Sections: 68 6.21%
00:57:55 Found Progressive Sections:72 6.58%
00:57:55 Found Telecined Sections: 955 87.21%
00:57:55 Found Zero Mov: 6.58% 72
00:57:55 Found One Mov: 6.12% 67
00:57:55 Found Two Mov: 87.21% 955
00:57:55 Found Three Mov: 0.09% 1
00:57:55 Found Four Mov: 0.00% 0
00:57:55 Found Five Mov: 0.00% 0
00:57:55 The Movie is declared to telecined
00:57:56 Starting X264
00:57:56 Command Line 1' Pass X264: D:\Applications\2. Video Tools\AutoMKV\exe\encoder\x264.exe --pass 1 --bitrate 871 --stats "K:\Movies\A Fistful Of Dynamite\temp\.stats" --ref 1 --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --filter 0,0 --subme 2 --direct auto --vbv-maxrate 25000 --me dia --no-ssim --level 4.1 --b-pyramid --analyse none --threads auto --thread-input --aq-strength 0.50 --aq-sensitivity 13 --sar 11851852:10000000 --output NUL "K:\Movies\A Fistful Of Dynamite\temp\movie.avs"
00:57:56 Command Line 2' Pass X264: D:\Applications\2. Video Tools\AutoMKV\exe\encoder\x264.exe --pass 2 --bitrate 871 --stats "K:\Movies\A Fistful Of Dynamite\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --ref 6 --filter 0,0 --direct auto --vbv-maxrate 25000 --me hex --no-ssim --level 4.1 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8 --8x8dct --threads auto --thread-input --aq-strength 0.50 --aq-sensitivity 13 --sar 11851852:10000000 --output "K:\Movies\A Fistful Of Dynamite\temp\movie.264" "K:\Movies\A Fistful Of Dynamite\temp\movie.avs"
02:40:14 Finished 1' Pass X264
06:14:49 X264 Final 2 Pass Encoding Stats:
x264 [info]: using SAR=46296/39062
x264 [info]: using cpu capabilities: MMX MMXEXT SSE SSE2 SSE3 SSSE3 Cache64
06:14:49 Only Movie Size: 1025161344 bytes
06:14:49 "D:\Applications\2. Video Tools\AutoMKV\exe\matroska\MP4Box.exe" -add "K:\Movies\A Fistful Of Dynamite\temp\movie.264":par=1.777778 -chap "D:\Applications\2. Video Tools\AutoMKV\exe\chapters.txt" -add "K:\Movies\A Fistful Of Dynamite\temp\movie t80 3_2ch 448kbps delay 0ms.mp4:lang=und" -fps 23.976 -new "K:\Movies\A Fistful Of Dynamite\temp\FISTFUL_OF_DYNAMITE_CE_full.mp4"
06:16:35 Final Muxed size: -1 bytes
06:16:35 Encoding finished: 03:36:20 elapsed time
06:16:35 -----------------------------------------------------------------------
06:16:35 Script AutoCrop.log
06:16:35
06:16:35 Crop(0,58,720,360)
06:16:35 -----------------------------------------------------------------------
06:16:35 Script movie.avs
06:16:35
06:16:35 #loadpluginstart
06:16:35
06:16:35 #test1
06:16:35
06:16:35 #importstart
06:16:35
06:16:35 #test2
06:16:35
06:16:35 movie = mpeg2source("K:\Movies\A Fistful Of Dynamite\temp\movie.d2v")
06:16:35 function getOrder(clip c) {
06:16:35 order = GetParity(c) ? 1 : 0
06:16:35 Return order }
06:16:35 #filter1start
06:16:35
06:16:35 #test3
06:16:35
06:16:35 movie = tfm(movie,d2v="K:\Movies\A Fistful Of Dynamite\temp\movie.d2v").tdecimate()
06:16:35 last = movie
06:16:35 fixed_aspect = 2.000000
06:16:35 out_width = 720
06:16:35 #Aspect_Error = 2.222%
06:16:35 out_height = 480
06:16:35 #resizestart
06:16:35
06:16:35 #test4
06:16:35
06:16:35 #filter2start
06:16:35
06:16:35 #test5
06:16:35
06:16:35 RemoveGrain(mode=2)
06:16:35 -----------------------------------------------------------------------
06:16:35 Script mkvmaudio.avs
06:16:35
06:16:35 LoadPlugin("D:\Applications\2. Video Tools\AutoMKV\exe\filter\NicAudio.dll")
06:16:35 LoadPlugin("D:\Applications\2. Video Tools\AutoMKV\exe\filter\SoundOut.dll")
06:16:35 LoadPlugin("D:\Applications\2. Video Tools\AutoMKV\exe\filter\FFmpegSource.dll")
06:16:35 NicAC3Source("K:\Movies\A Fistful Of Dynamite\temp\movie t80 3_2ch 448kbps delay 0ms.ac3")
06:16:35 DelayAudio(0.0000)
06:16:35 #Applying ORIGINAL downmixing routines
06:16:35
06:16:35 function addvideo(clip c) {
06:16:35 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
06:16:35 Return audiodub(last,c)
06:16:35 }
06:16:35 Normalize()
06:16:35
06:16:35 Soundout(output="wav",type=1,autoclose=true,filename="audio.wav",showoutput=false)
06:16:35
06:16:35 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

[zacoz]

Is there anyway that I can not reencode the video using the GUI? I'm just trying to mux it into MP4, hardsub the video and reencode the audio only.
Yes you can not encode the video but have the subs extracted and audio processed by ticking Prepare Phase Only on the advanced settings tab.
BUT You can't burn the subs into the video without re-encoding it, so you have no choice but to re-encode fully (regardless of what software you use).

Please help....
The log window said that the job was finished but I could not find any output :(
I have the option of "deleting the Temp files after the job"- enabled.
Where is the output?

06:16:35 Final Muxed size: -1 bytes

No muxed output produced - there was apparently a problem during muxing as it does appear from the log that the audio and video output files were created. You could've tried muxing them manually, BUT, they're now gone.

Moral of the Story - Don't tick "Del Temp File".

With a recent change to AutoMKV there's really no good reason to use the delete temp files option as even in batch mode now there's no problems re-using the same temp directory - it's cleared before each job is run.

[buzzqw]

06:14:49 "D:\Applications\2. Video Tools\AutoMKV\exe\matroska\MP4Box.exe" -add "K:\Movies\A Fistful Of Dynamite\temp\movie.264"ar=1.777778 -chap "D:\Applications\2. Video Tools\AutoMKV\exe\chapters.txt" -add "K:\Movies\A Fistful Of Dynamite\temp\movie t80 3_2ch 448kbps delay 0ms.mp4:lang=und" -fps 23.976 -new "K:\Movies\A Fistful Of Dynamite\temp\FISTFUL_OF_DYNAMITE_CE_full.mp4"

mp4box dislike dots, expecially on folder name...

BHH

[delacroixp]

Suppose, in AutoMKV, I perform an XviD single pass at CQ3 with "100% Quality" checked in advanced settings. I then note the resultant file-size and enter it in the output size box for a 2-Pass "Insane Quality".

Q. Assuming all other settings (filters, etc) remain the same, will a 2-Pass of output size XYZmb be of discernibly higher quality than a CQ of size XYZmb? (IOW, am I getting anything for tripling the encoding time ?)

simply NO.
If you do a single pass at 75% and get the filesize then use that filesize to do a two pass the results should be better.


Well... strictly speaking, 2-pass should be worse than "1-pass CQ" !

2-pass keeps looking over it's shoulder to maximise the quality without over-running the bitrate (CQ has no worries).
The result is that overall the quality is the same... but probably with 99% consistency... some sections have more quality while others have less.
2-pass is a bit like communism... always trying to share equally but never quite succeeding.

CQ gets it right the first time !


:):devil::D
Pascal

[arrirc]

06:16:35 Final Muxed size: -1 bytes

No muxed output produced - there was apparently a problem during muxing as it does appear from the log that the audio and video output files were created. You could've tried muxing them manually, BUT, they're now gone.

Moral of the Story - Don't tick "Del Temp File".

With a recent change to AutoMKV there's really no good reason to use the delete temp files option as even in batch mode now there's no problems re-using the same temp directory - it's cleared before each job is run.

Thanks for your reply...

Ok, I shall try to redo the job without deleting the TEMP files. But will it guarantee an output as because the main problem remains unanswered still, why is there no Final Output produced? It seems that log is not throwing light in that direction. :confused:

And how can the Temporary files could be muxed? Sorry, but this is the first time I am attempting a X264 conversion.

Any help...?

mp4box dislike dots, expecially on folder name...

BHH

Nothing can be done on that front....I really do not plan to change the folder name as that will force me to change every Shortcut manually....and there are quite a lot. :eek:

[zacoz]

@arrirc

buzzqw's response explained the why - "mp4box dislike dots"

I know when I use mkv container, there is a batch file "muxing.bat" in the temp directory that I could run (or edit first as need be). Not sure about mp4 container though as I don't use it.

Why not just make an exception for AutoMKV, moving it to a different folder.

If you're going to stick with using a folder with dots in it then you're going to keep having this problem - likely regardless of which GUI you use as quite a lot of them use mp4box for the muxing as I understand it.

[bobrap]

I seem to have a similar problem...no output file.

08:20:46 0.95c - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
08:20:46 Selected Input file: G:\VIDEO_TS\VTS_05_0.IFO
08:20:46 Selected Output dir: temp\
08:20:46 Selected Final Name: movie
08:20:46 Selected Container type: MKV
08:20:46 Selected Encoder: X264
08:20:46 Selected Size: 1 CD / 1
08:20:46 Selected Profile: 2_Pass_Balanced.xml
08:20:46 Selected Resizer: SimpleResize (neutral soft) / Automatic
08:20:46 Selected Filters: RemoveGrain(mode=2)
08:20:46 Selected Deinterlacer: AUTO
08:20:46 Selected Field Order: AUTO
08:20:46 Enabled CRF/CQ AutoRes at 18 value
08:20:46 Activate PGC Ripping: 1
08:20:46 Track Language 1: 80: English (AC3 2ch, 0xBD 0x80) [0]
08:20:46 Audio Codec 1: Copy Original
08:20:46 Track Language 2: NONE
08:20:46 Audio Codec 2: Nero AAC
08:20:46
08:20:46 Starting ripping from G:\VIDEO_TS\ to temp\
08:26:06 Finished Ripping
08:26:06 Activate PGC processing: PGC 1 [1:41:25:08]
08:26:06 Dgindex CMD: C:\Program Files\AutoMKV\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=80 -YR=2 -AIF=[C:\Program Files\AutoMKV\temp\DVD\VIDEO_TS\VTS_05_1.vob] -OF=[C:\Program Files\AutoMKV\temp\movie] -exit -minimize
08:29:08 D2V file size: 871525 bytes
08:29:08 Audio 1: movie t80 2_0ch 192kbps delay 0ms.ac3
08:29:08 Pre Audio 1' Size: 146181120 bytes
08:29:08 Renamed file movie t80 2_0ch 192kbps delay 0ms.ac3 to movie t80 2_0ch 192kbps delay 0ms_.ac3
08:29:08 Encoded 1' Audio Track: movie t80 2_0ch 192kbps delay 0ms_.ac3 146181120 bytes
08:29:12 Number of Frames: 182544
08:29:12 Framerate: 29.970030
08:29:12 Movie length in Seconds: 6091
08:29:12 Movie Width/Height: 720/480
08:29:12 DgIndex AR: 4:3
08:32:58 Source is declared tff by a margin of 226/8.
08:32:58 Advanced Deinterlace Routines Log
08:32:58 Analyzed 963 sections of five frames
08:32:58 Found Interlace Sections: 624 64.80%
08:32:58 Found Progressive Sections:205 21.29%
08:32:58 Found Telecined Sections: 134 13.91%
08:32:58 Found Zero Mov: 21.29% 205
08:32:58 Found One Mov: 9.35% 90
08:32:58 Found Two Mov: 13.91% 134
08:32:58 Found Three Mov: 22.22% 214
08:32:58 Found Four Mov: 26.48% 255
08:32:58 Found Five Mov: 6.75% 65
08:32:58 The Movie is declared to interlaced
08:32:58 Starting X264 AutoResize with WIDTH of Automatic and wanted size of 734003200 bytes
08:32:58 CRF encoding X264: C:\Program Files\AutoMKV\exe\encoder\x264.exe --pass 1 --crf 18 --stats "C:\Program Files\AutoMKV\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --ref 4 --filter 0,0 --direct auto --vbv-maxrate 25000 --me hex --no-ssim --level 4.1 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4 --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output "C:\Program Files\AutoMKV\temp\resmovie.mp4" "C:\Program Files\AutoMKV\temp\resmovie.avs"
08:42:03 Finished Autosize procedure
08:42:03 Tested total movie: 5%
08:42:03 AutoResize movie size: 90146064 bytes
08:42:03 Movie Width suggested: 368 value based on sample size (51.11% of original width)
08:42:03 Starting X264
08:42:03 Command Line 1' Pass X264: C:\Program Files\AutoMKV\exe\encoder\x264.exe --pass 1 --bitrate 766 --stats "C:\Program Files\AutoMKV\temp\.stats" --ref 1 --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --filter 0,0 --subme 2 --direct auto --vbv-maxrate 25000 --me dia --no-ssim --level 4.1 --b-pyramid --analyse none --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output NUL "C:\Program Files\AutoMKV\temp\movie.avs"
08:42:03 Command Line 2' Pass X264: C:\Program Files\AutoMKV\exe\encoder\x264.exe --pass 2 --bitrate 766 --stats "C:\Program Files\AutoMKV\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --ref 4 --filter 0,0 --direct auto --vbv-maxrate 25000 --me hex --no-ssim --level 4.1 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4 --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output "C:\Program Files\AutoMKV\temp\movie.264" "C:\Program Files\AutoMKV\temp\movie.avs"
09:05:42 Finished 1' Pass X264
10:00:25 X264 Final 2 Pass Encoding Stats:
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX MMXEXT SSE SSE2 SSE3 SSSE3 Cache64
x264 [info]: slice I:1365 Avg QP:16.01 size: 13054
10:00:25 Only Movie Size: 583266112 bytes
10:00:25 "C:\Program Files\AutoMKV\exe\matroska\mkvmerge.exe" -o "C:\Program Files\AutoMKV\temp\movie.mkv" --default-duration 0:30000/1001fps --track-name -1:"movie" --aspect-ratio -1:1.352941 --chapters "C:\Program Files\AutoMKV\exe\chapters.txt" "C:\Program Files\AutoMKV\temp\movie.264" --language -1:eng --default-track -1:yes "C:\Program Files\AutoMKV\temp\movie t80 2_0ch 192kbps delay 0ms_.ac3" --title "Done with AutoMKV 0.95c http://forum.doom9.org/showthread.php?t=134478 "
10:00:25 Final Muxed size: -1 bytes
10:00:25 Encoding finished: 00:54:43 elapsed time
10:00:25 -----------------------------------------------------------------------
10:00:25 Script AutoCrop.log
10:00:25
10:00:25 Crop(0,0,720,480)
10:00:25 -----------------------------------------------------------------------
10:00:25 Script Resmovie.avs
10:00:25
10:00:25 #loadpluginstart
10:00:25
10:00:25 #test1
10:00:25
10:00:25 #importstart
10:00:25
10:00:25 #test2
10:00:25
10:00:25 movie = mpeg2source("C:\Program Files\AutoMKV\temp\movie.d2v")
10:00:25 function getOrder(clip c) {
10:00:25 order = GetParity(c) ? 1 : 0
10:00:25 Return order }
10:00:25 #filter1start
10:00:25
10:00:25 #test3
10:00:25
10:00:25 movie = LeakKernelDeint(movie,order=1,sharp=true)
10:00:25 last=movie.Crop(0,0,720,480)
10:00:25 fixed_aspect = 1.333300
10:00:25 out_width = 704
10:00:25 #Aspect_Error = -0.003%
10:00:25 out_height = 528
10:00:25 #resizestart
10:00:25
10:00:25 #test4
10:00:25
10:00:25 SimpleResize(out_width,out_height)
10:00:25 #filter2start
10:00:25
10:00:25 #test5
10:00:25
10:00:25 RemoveGrain(mode=2)
10:00:25 function Comptest(clip c, float percent)
10:00:25 {
10:00:25 frange=floor(14./(percent/100.))
10:00:25 Return SelectRangeEvery(c, frange, 14)
10:00:25 }
10:00:25 Comptest(last,5)
10:00:25 -----------------------------------------------------------------------
10:00:25 Script movie.avs
10:00:25
10:00:25 #loadpluginstart
10:00:25
10:00:25 #test1
10:00:25
10:00:25 #importstart
10:00:25
10:00:25 #test2
10:00:25
10:00:25 movie = mpeg2source("C:\Program Files\AutoMKV\temp\movie.d2v")
10:00:25 function getOrder(clip c) {
10:00:25 order = GetParity(c) ? 1 : 0
10:00:25 Return order }
10:00:25 #filter1start
10:00:25
10:00:25 #test3
10:00:25
10:00:25 movie = LeakKernelDeint(movie,order=1,sharp=true)
10:00:25 last=movie.Crop(0,0,720,480)
10:00:25 fixed_aspect = 1.333300
10:00:25 out_width = 368
10:00:25 #Aspect_Error = -1.452%
10:00:25 out_height = 272
10:00:25 #resizestart
10:00:25
10:00:25 #test4
10:00:25
10:00:25 SimpleResize(out_width,out_height)
10:00:25 #filter2start
10:00:25
10:00:25 #test5
10:00:25
10:00:25 RemoveGrain(mode=2)
10:00:25 -----------------------------------------------------------------------
10:00:25 Script mkvmaudio.avs
10:00:25
10:00:25 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\NicAudio.dll")
10:00:25 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\SoundOut.dll")
10:00:25 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\FFmpegSource.dll")
10:00:25 NicAC3Source("C:\Program Files\AutoMKV\temp\movie t80 2_0ch 192kbps delay 0ms.ac3")
10:00:25 #Applying STEREO downmixing routines
10:00:25 function stereo(clip a)
10:00:25 {
10:00:25 flr = GetChannel(a, 1, 2)
10:00:25 fcc = GetChannel(a, 3)
10:00:25 lfe = GetChannel(a, 4)
10:00:25 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
10:00:25 mix = MergeChannels(lfc, lfc)
10:00:25 lrc = MixAudio(flr, mix, 0.2929, 1.0)
10:00:25 blr = GetChannel(a, 5, 6)
10:00:25 Return MixAudio(lrc, blr, 1.0, 0.2929)
10:00:25 }
10:00:25 #
10:00:25 6==Audiochannels() ? stereo() : last
10:00:25 function addvideo(clip c) {
10:00:25 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
10:00:25 Return audiodub(last,c)
10:00:25 }
10:00:25 Normalize()
10:00:25
10:00:25
10:00:25 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

Any help is really appreciated:thanks:

[buzzqw]

Selected Output dir: temp\

it's not a correct path :confused: ... should be something like c:\temp ... but only "temp\" will foul automkv when move final mkv from temp folder to destination folder ...

BHH

[buzzqw]

news on new update

as you may know i am quite busy with my new baby, but i don't forgot my friendly users!

0.96 is on the right way, i have done some bugfixing and introduced support for divx 6.8
i also have changed (again... and if not good i will totally remove the support) the wmv encoding
now is based on vc1encoder (based on free vc1 sdk), so no more direct profile for wmv7,wmv8,wmv9 or zune profile.
WMV will have the standard profiles, AND actually NO 1 pass or Constant quality profiles, since vc1 sdk is broken and not allow 1 pass/constant quality encoding :confused: :mad:

I wil also have introduced surely more bugs.. but i hope not to much

some users as requested support for building bluray disk.. i actually prefer (for my ps3) "simple" m2ts files... but if many users are interested i will look how to support this muxing

best regards

BHH

[bobrap]

Congrats on the little one!

Changed to a differenttemp folder...same result:confused:

12:36:44 0.95c - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
12:36:44 Selected Input file: G:\VIDEO_TS\VTS_05_0.IFO
12:36:44 Selected Output dir: C:\NewFold\temp\
12:36:44 Selected Final Name: movie
12:36:44 Selected Container type: MKV
12:36:44 Selected Encoder: X264
12:36:44 Selected Size: 1 CD / 1
12:36:44 Selected Profile: 2_Pass_Balanced.xml
12:36:44 Selected Resizer: SimpleResize (neutral soft) / Automatic
12:36:44 Selected Filters: RemoveGrain(mode=2)
12:36:44 Selected Deinterlacer: AUTO
12:36:44 Selected Field Order: AUTO
12:36:44 Enabled CRF/CQ AutoRes at 18 value
12:36:44 Activate PGC Ripping: 1
12:36:44 Track Language 1: 80: English (AC3 2ch, 0xBD 0x80) [0]
12:36:44 Audio Codec 1: Copy Original
12:36:44 Track Language 2: NONE
12:36:44 Audio Codec 2: Nero AAC
12:36:44
12:36:44 Starting ripping from G:\VIDEO_TS\ to C:\NewFold\temp\
12:46:03 Finished Ripping
12:46:03 Activate PGC processing: PGC 1 [1:41:25:08]
12:46:03 Dgindex CMD: C:\Program Files\AutoMKV\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=80 -YR=2 -AIF=[C:\NewFold\temp\DVD\VIDEO_TS\VTS_05_1.vob] -OF=[C:\NewFold\temp\movie] -exit -minimize
12:48:17 D2V file size: 871511 bytes
12:48:17 Audio 1: movie t80 2_0ch 192kbps delay 0ms.ac3
12:48:17 Pre Audio 1' Size: 146181120 bytes
12:48:17 Renamed file movie t80 2_0ch 192kbps delay 0ms.ac3 to movie t80 2_0ch 192kbps delay 0ms_.ac3
12:48:17 Encoded 1' Audio Track: movie t80 2_0ch 192kbps delay 0ms_.ac3 146181120 bytes
12:48:21 Number of Frames: 182544
12:48:21 Framerate: 29.970030
12:48:21 Movie length in Seconds: 6091
12:48:21 Movie Width/Height: 720/480
12:48:21 DgIndex AR: 4:3
12:52:03 Source is declared tff by a margin of 226/8.
12:52:03 Advanced Deinterlace Routines Log
12:52:03 Analyzed 963 sections of five frames
12:52:03 Found Interlace Sections: 624 64.80%
12:52:03 Found Progressive Sections:205 21.29%
12:52:03 Found Telecined Sections: 134 13.91%
12:52:03 Found Zero Mov: 21.29% 205
12:52:03 Found One Mov: 9.35% 90
12:52:03 Found Two Mov: 13.91% 134
12:52:03 Found Three Mov: 22.22% 214
12:52:03 Found Four Mov: 26.48% 255
12:52:03 Found Five Mov: 6.75% 65
12:52:03 The Movie is declared to interlaced
12:52:03 Starting X264 AutoResize with WIDTH of Automatic and wanted size of 734003200 bytes
12:52:03 CRF encoding X264: C:\Program Files\AutoMKV\exe\encoder\x264.exe --pass 1 --crf 18 --stats "C:\NewFold\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --ref 4 --filter 0,0 --direct auto --vbv-maxrate 25000 --me hex --no-ssim --level 4.1 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4 --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output "C:\NewFold\temp\resmovie.mp4" "C:\NewFold\temp\resmovie.avs"
12:59:48 Finished Autosize procedure
12:59:48 Tested total movie: 5%
12:59:48 AutoResize movie size: 90146064 bytes
12:59:48 Movie Width suggested: 368 value based on sample size (51.11% of original width)
12:59:48 Starting X264
12:59:48 Command Line 1' Pass X264: C:\Program Files\AutoMKV\exe\encoder\x264.exe --pass 1 --bitrate 766 --stats "C:\NewFold\temp\.stats" --ref 1 --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --filter 0,0 --subme 2 --direct auto --vbv-maxrate 25000 --me dia --no-ssim --level 4.1 --b-pyramid --analyse none --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output NUL "C:\NewFold\temp\movie.avs"
12:59:49 Command Line 2' Pass X264: C:\Program Files\AutoMKV\exe\encoder\x264.exe --pass 2 --bitrate 766 --stats "C:\NewFold\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --mixed-refs --trellis 1 --ref 4 --filter 0,0 --direct auto --vbv-maxrate 25000 --me hex --no-ssim --level 4.1 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4 --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar 1:1 --output "C:\NewFold\temp\movie.264" "C:\NewFold\temp\movie.avs"
13:20:05 Finished 1' Pass X264
14:14:15 X264 Final 2 Pass Encoding Stats:
14:14:20 Only Movie Size: 583266048 bytes
14:14:20 "C:\Program Files\AutoMKV\exe\matroska\mkvmerge.exe" -o "C:\NewFold\temp\movie.mkv" --default-duration 0:30000/1001fps --track-name -1:"movie" --aspect-ratio -1:1.352941 --chapters "C:\Program Files\AutoMKV\exe\chapters.txt" "C:\NewFold\temp\movie.264" --language -1:eng --default-track -1:yes "C:\NewFold\temp\movie t80 2_0ch 192kbps delay 0ms_.ac3" --title "Done with AutoMKV 0.95c http://forum.doom9.org/showthread.php?t=134478 "
14:14:25 Final Muxed size: -1 bytes
14:14:25 Encoding finished: 00:54:20 elapsed time
14:14:25 -----------------------------------------------------------------------
14:14:25 Script AutoCrop.log
14:14:25
14:14:25 Crop(0,0,720,480)
14:14:25 -----------------------------------------------------------------------
14:14:25 Script Resmovie.avs
14:14:25
14:14:25 #loadpluginstart
14:14:25
14:14:25 #test1
14:14:25
14:14:25 #importstart
14:14:25
14:14:25 #test2
14:14:25
14:14:25 movie = mpeg2source("C:\NewFold\temp\movie.d2v")
14:14:25 function getOrder(clip c) {
14:14:25 order = GetParity(c) ? 1 : 0
14:14:25 Return order }
14:14:25 #filter1start
14:14:25
14:14:25 #test3
14:14:25
14:14:25 movie = LeakKernelDeint(movie,order=1,sharp=true)
14:14:25 last=movie.Crop(0,0,720,480)
14:14:25 fixed_aspect = 1.333300
14:14:25 out_width = 704
14:14:25 #Aspect_Error = -0.003%
14:14:25 out_height = 528
14:14:25 #resizestart
14:14:25
14:14:25 #test4
14:14:25
14:14:25 SimpleResize(out_width,out_height)
14:14:25 #filter2start
14:14:25
14:14:25 #test5
14:14:25
14:14:25 RemoveGrain(mode=2)
14:14:25 function Comptest(clip c, float percent)
14:14:25 {
14:14:25 frange=floor(14./(percent/100.))
14:14:25 Return SelectRangeEvery(c, frange, 14)
14:14:25 }
14:14:25 Comptest(last,5)
14:14:25 -----------------------------------------------------------------------
14:14:25 Script movie.avs
14:14:25
14:14:28 #loadpluginstart
14:14:28
14:14:28 #test1
14:14:28
14:14:28 #importstart
14:14:28
14:14:28 #test2
14:14:28
14:14:28 movie = mpeg2source("C:\NewFold\temp\movie.d2v")
14:14:28 function getOrder(clip c) {
14:14:28 order = GetParity(c) ? 1 : 0
14:14:28 Return order }
14:14:28 #filter1start
14:14:28
14:14:28 #test3
14:14:28
14:14:28 movie = LeakKernelDeint(movie,order=1,sharp=true)
14:14:28 last=movie.Crop(0,0,720,480)
14:14:28 fixed_aspect = 1.333300
14:14:28 out_width = 368
14:14:28 #Aspect_Error = -1.452%
14:14:28 out_height = 272
14:14:28 #resizestart
14:14:28
14:14:28 #test4
14:14:28
14:14:28 SimpleResize(out_width,out_height)
14:14:28 #filter2start
14:14:28
14:14:28 #test5
14:14:28
14:14:28 RemoveGrain(mode=2)
14:14:28 -----------------------------------------------------------------------
14:14:28 Script mkvmaudio.avs
14:14:28
14:14:28 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\NicAudio.dll")
14:14:28 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\SoundOut.dll")
14:14:28 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\FFmpegSource.dll")
14:14:28 NicAC3Source("C:\NewFold\temp\movie t80 2_0ch 192kbps delay 0ms.ac3")
14:14:28 #Applying STEREO downmixing routines
14:14:28 function stereo(clip a)
14:14:28 {
14:14:28 flr = GetChannel(a, 1, 2)
14:14:28 fcc = GetChannel(a, 3)
14:14:28 lfe = GetChannel(a, 4)
14:14:28 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
14:14:28 mix = MergeChannels(lfc, lfc)
14:14:28 lrc = MixAudio(flr, mix, 0.2929, 1.0)
14:14:28 blr = GetChannel(a, 5, 6)
14:14:28 Return MixAudio(lrc, blr, 1.0, 0.2929)
14:14:28 }
14:14:28 #
14:14:28 6==Audiochannels() ? stereo() : last
14:14:28 function addvideo(clip c) {
14:14:28 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
14:14:28 Return audiodub(last,c)
14:14:28 }
14:14:28 Normalize()
14:14:28
14:14:28
14:14:28 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

[buzzqw]

please manually lauch muxing.bat, what is the errors ?

BHH

[bobrap]

I uninstalled and used the manual version (not the one with installer) and seems to have fixed my problem. Thanks.

[buzzqw]

... ok!

thanks to you!

BHH

[arrirc]

Mine was zipped version only, not the installer, the installer link did not work the time I tried to download.

[buzzqw]

@ALL

to all friends that have contributed to WIKI

i have blocked the wiki, due to mass spam/vandalize

anyone that want to be sysops (and i hope several contributors) please mail me.. and also tell me how to promove you to sysops :p

BHH

[Henrikx]

Don't forget to clean Community Portal, Current events.

[buzzqw]

done, thanks!

BHH

[arrirc]

Ok, after de selecting the option to delete the TEMP folder, I did get the output but it was without any Audio :confused:

I have chosen AAC Original in the Audio Options.

One thing I should mention here, and that is after downloading the Codec from NERO official Site, I could not find any dll file as mentioned in the Guide, instead there are 4 exe files under the win32 directory.


Sorry, but I have accidentally deleted the Log File after the process failed, but I can confirm this that I have selected the Right Audio track and it was demuxed and stored in the folder where the output was to be saved.

Could the Developer please tell me why I did not get the Audio? :eek::confused:


:thanks:

[fateman]

My setup stopped encoding - not sure why. I have the source VOBs running from a USB drive...

I could try reinstalling things, but I can't see from the log what the problem is. Anybody have an idea?

09:25:58 0.95c - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
09:25:58 Selected Input file: C:\SHAUN_OF_THE_DEAD\VIDEO_TS\VTS_01_0.IFO
09:25:58 Selected Output dir: C:\SHAUN_OF_THE_DEAD\temp\
09:25:58 Selected Final Name: SHAUN_OF_THE_DEAD
09:25:58 Selected Container type: MKV
09:25:58 Selected Encoder: X264
09:25:58 Selected Size: / 1
09:25:58 Selected Profile: 1_Pass_High Performance.xml
09:25:58 Selected Resizer: NONE / Original
09:25:58 Selected Filters: RemoveGrain(mode=2)
09:25:58 Selected Deinterlacer: AUTO
09:25:58 Selected Field Order: AUTO
09:25:58 Specify Bitrate: 2000
09:25:58 Enabled Bitrate encoding with value 2000
09:25:58 Activate PGC Ripping: 1
09:25:58 Using Queue: automkv.ini of 0 works
09:25:58 Track Language 1: All Audio Tracks
09:25:58 Audio Codec 1: Copy Original
09:25:58 Track Language 2: NONE
09:25:58 Audio Codec 2: Copy Original
09:25:58 Selected 1' Sub tracks: English 1 (0xBD 0x21) [0,1] wide
09:25:58 Activate Anamorphic Encoding
09:25:58
09:25:58 Starting SubRipping
09:29:35 Subtitle Size: 6506496 bytes
09:29:35 Finished SubRipping
09:33:42 Renamed file to audio.ac3
09:33:42 Renamed file to audio.ac3
09:33:42 Renamed file to audio.ac3
09:33:42 D2V Film Detected: 99.699997% FILM found
09:33:47 Number of Frames: 178837
09:33:47 Framerate: 29.970030
09:33:47 Movie length in Seconds: 5968
09:33:47 Movie Width/Height: 720/480
09:33:47 DgIndex AR: 16:9
09:37:50 Source is declared tff by a margin of 151/2.
09:37:50 Advanced Deinterlace Routines Log
09:37:50 Analyzed 707 sections of five frames
09:37:50 Found Interlace Sections: 17 2.40%
09:37:50 Found Progressive Sections:34 4.81%
09:37:50 Found Telecined Sections: 656 92.79%
09:37:50 Found Zero Mov: 4.81% 34
09:37:50 Found One Mov: 1.84% 13
09:37:50 Found Two Mov: 92.79% 656
09:37:50 Found Three Mov: 0.00% 0
09:37:50 Found Four Mov: 0.28% 2
09:37:50 Found Five Mov: 0.28% 2
09:37:50 The Movie is declared to telecined
09:37:50 Checking script...movie.avs
09:37:52 Starting X264
09:37:52 ABR encoding X264: C:\Program Files\AutoMKV\exe\encoder\x264.exe --bitrate 2000 --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --ref 3 --filter 0,0 --subme 4 --direct auto --vbv-maxrate 25000 --me hex --no-ssim --level 4.1 --weightb --analyse p8x8,b8x8,i4x4 --threads auto --thread-input --aq-strength 0 --aq-sensitivity 0 --sar NONE --output "C:\SHAUN_OF_THE_DEAD\temp\movie.264" "C:\SHAUN_OF_THE_DEAD\temp\movie.avs"
09:37:55 X264 Final ABR Encoding Stats:
09:37:56 "C:\Program Files\AutoMKV\exe\matroska\mkvmerge.exe" -o "C:\SHAUN_OF_THE_DEAD\temp\SHAUN_OF_THE_DEAD.mkv" --default-duration 0:25000/1000fps --engage keep_bitstream_ar_info --track-name -1:"SHAUN_OF_THE_DEAD" --aspect-ratio -1:1.500000 --chapters "C:\Program Files\AutoMKV\exe\chapters.txt" "C:\SHAUN_OF_THE_DEAD\temp\movie.264" "C:\SHAUN_OF_THE_DEAD\temp\audio1.ac3" "C:\SHAUN_OF_THE_DEAD\temp\audio2.ac3" "C:\SHAUN_OF_THE_DEAD\temp\audio3.ac3" "C:\SHAUN_OF_THE_DEAD\temp\SHAUN_OF_THE_DEAD.idx" --title "Done with AutoMKV 0.95c http://forum.doom9.org/showthread.php?t=134478 "
09:37:57 Final Muxed size: -1 bytes
09:37:57 Encoding finished: 00:00:05 elapsed time
09:37:57 -----------------------------------------------------------------------
09:37:57 Script AutoCrop.log
09:37:57
09:37:57 Crop(2,58,716,360)
09:37:57 -----------------------------------------------------------------------
09:37:57 Script movie.avs
09:37:57
09:37:57 #loadpluginstart
09:37:57
09:37:57 #test1
09:37:57
09:37:57 #importstart
09:37:57
09:37:57 #test2
09:37:57
09:37:57 movie = mpeg2source("C:\SHAUN_OF_THE_DEAD\temp\movie.d2v")
09:37:57 function getOrder(clip c) {
09:37:57 order = GetParity(c) ? 1 : 0
09:37:57 Return order }
09:37:57 #filter1start
09:37:57
09:37:57 #test3
09:37:57
09:37:57 movie = tfm(movie,d2v="C:\SHAUN_OF_THE_DEAD\temp\movie.d2v").tdecimate()
09:37:57 last = movie
09:37:57 fixed_aspect = 1.988889
09:37:57 out_width = 720
09:37:57 #Aspect_Error = -100.000%
09:37:57 out_height = 480
09:37:57 #resizestart
09:37:57
09:37:57 #test4
09:37:57
09:37:57 #filter2start
09:37:57
09:37:57 #test5
09:37:57
09:37:57 RemoveGrain(mode=2)
09:37:57 -----------------------------------------------------------------------
09:37:57 Script mkvmaudio.avs
09:37:57
09:37:57 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\NicAudio.dll")
09:37:57 LoadPlugin("C:\Program Files\AutoMKV\exe\filter\SoundOut.dll")
09:37:57 NicAC3Source("C:\SHAUN_OF_THE_DEAD\temp\movie T84 2_0ch 192Kbps DELAY 0ms.ac3")
09:37:57 function addvideo(clip c) {
09:37:57 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
09:37:57 Return audiodub(last,c)
09:37:57 }
09:37:57 Normalize()
09:37:57 ConvertAudioTo16bit()
09:37:57 #Applying STEREO downmixing routines
09:37:57 function stereo(clip a)
09:37:57 {
09:37:57 flr = GetChannel(a, 1, 2)
09:37:57 fcc = GetChannel(a, 3)
09:37:57 lfe = GetChannel(a, 4)
09:37:57 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
09:37:57 mix = MergeChannels(lfc, lfc)
09:37:57 lrc = MixAudio(flr, mix, 0.2929, 1.0)
09:37:57 blr = GetChannel(a, 5, 6)
09:37:57 Return MixAudio(lrc, blr, 1.0, 0.2929)
09:37:57 }
09:37:57 #
09:37:57 6==Audiochannels() ? stereo() : last
09:37:57
09:37:57 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -